VOL-2496 Add "event listen" command to voltctl
Change-Id: I8f1fb34b55f56c8125142ac289e2f19fc170d804
diff --git a/vendor/github.com/klauspost/compress/zstd/encoder.go b/vendor/github.com/klauspost/compress/zstd/encoder.go
new file mode 100644
index 0000000..366dd66
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/zstd/encoder.go
@@ -0,0 +1,539 @@
+// Copyright 2019+ Klaus Post. All rights reserved.
+// License information can be found in the LICENSE file.
+// Based on work by Yann Collet, released under BSD License.
+
+package zstd
+
+import (
+ "crypto/rand"
+ "fmt"
+ "io"
+ rdebug "runtime/debug"
+ "sync"
+
+ "github.com/klauspost/compress/zstd/internal/xxhash"
+)
+
+// Encoder provides encoding to Zstandard.
+// An Encoder can be used for either compressing a stream via the
+// io.WriteCloser interface supported by the Encoder or as multiple independent
+// tasks via the EncodeAll function.
+// Smaller encodes are encouraged to use the EncodeAll function.
+// Use NewWriter to create a new instance.
+type Encoder struct {
+ o encoderOptions
+ encoders chan encoder
+ state encoderState
+ init sync.Once
+}
+
+type encoder interface {
+ Encode(blk *blockEnc, src []byte)
+ EncodeNoHist(blk *blockEnc, src []byte)
+ Block() *blockEnc
+ CRC() *xxhash.Digest
+ AppendCRC([]byte) []byte
+ WindowSize(size int) int32
+ UseBlock(*blockEnc)
+ Reset()
+}
+
+type encoderState struct {
+ w io.Writer
+ filling []byte
+ current []byte
+ previous []byte
+ encoder encoder
+ writing *blockEnc
+ err error
+ writeErr error
+ nWritten int64
+ headerWritten bool
+ eofWritten bool
+
+ // This waitgroup indicates an encode is running.
+ wg sync.WaitGroup
+ // This waitgroup indicates we have a block encoding/writing.
+ wWg sync.WaitGroup
+}
+
+// NewWriter will create a new Zstandard encoder.
+// If the encoder will be used for encoding blocks a nil writer can be used.
+func NewWriter(w io.Writer, opts ...EOption) (*Encoder, error) {
+ initPredefined()
+ var e Encoder
+ e.o.setDefault()
+ for _, o := range opts {
+ err := o(&e.o)
+ if err != nil {
+ return nil, err
+ }
+ }
+ if w != nil {
+ e.Reset(w)
+ } else {
+ e.init.Do(func() {
+ e.initialize()
+ })
+ }
+ return &e, nil
+}
+
+func (e *Encoder) initialize() {
+ e.encoders = make(chan encoder, e.o.concurrent)
+ for i := 0; i < e.o.concurrent; i++ {
+ e.encoders <- e.o.encoder()
+ }
+}
+
+// Reset will re-initialize the writer and new writes will encode to the supplied writer
+// as a new, independent stream.
+func (e *Encoder) Reset(w io.Writer) {
+ e.init.Do(func() {
+ e.initialize()
+ })
+ s := &e.state
+ s.wg.Wait()
+ s.wWg.Wait()
+ if cap(s.filling) == 0 {
+ s.filling = make([]byte, 0, e.o.blockSize)
+ }
+ if cap(s.current) == 0 {
+ s.current = make([]byte, 0, e.o.blockSize)
+ }
+ if cap(s.previous) == 0 {
+ s.previous = make([]byte, 0, e.o.blockSize)
+ }
+ if s.encoder == nil {
+ s.encoder = e.o.encoder()
+ }
+ if s.writing == nil {
+ s.writing = &blockEnc{}
+ s.writing.init()
+ }
+ s.writing.initNewEncode()
+ s.filling = s.filling[:0]
+ s.current = s.current[:0]
+ s.previous = s.previous[:0]
+ s.encoder.Reset()
+ s.headerWritten = false
+ s.eofWritten = false
+ s.w = w
+ s.err = nil
+ s.nWritten = 0
+ s.writeErr = nil
+}
+
+// Write data to the encoder.
+// Input data will be buffered and as the buffer fills up
+// content will be compressed and written to the output.
+// When done writing, use Close to flush the remaining output
+// and write CRC if requested.
+func (e *Encoder) Write(p []byte) (n int, err error) {
+ s := &e.state
+ for len(p) > 0 {
+ if len(p)+len(s.filling) < e.o.blockSize {
+ if e.o.crc {
+ _, _ = s.encoder.CRC().Write(p)
+ }
+ s.filling = append(s.filling, p...)
+ return n + len(p), nil
+ }
+ add := p
+ if len(p)+len(s.filling) > e.o.blockSize {
+ add = add[:e.o.blockSize-len(s.filling)]
+ }
+ if e.o.crc {
+ _, _ = s.encoder.CRC().Write(add)
+ }
+ s.filling = append(s.filling, add...)
+ p = p[len(add):]
+ n += len(add)
+ if len(s.filling) < e.o.blockSize {
+ return n, nil
+ }
+ err := e.nextBlock(false)
+ if err != nil {
+ return n, err
+ }
+ if debug && len(s.filling) > 0 {
+ panic(len(s.filling))
+ }
+ }
+ return n, nil
+}
+
+// nextBlock will synchronize and start compressing input in e.state.filling.
+// If an error has occurred during encoding it will be returned.
+func (e *Encoder) nextBlock(final bool) error {
+ s := &e.state
+ // Wait for current block.
+ s.wg.Wait()
+ if s.err != nil {
+ return s.err
+ }
+ if len(s.filling) > e.o.blockSize {
+ return fmt.Errorf("block > maxStoreBlockSize")
+ }
+ if !s.headerWritten {
+ var tmp [maxHeaderSize]byte
+ fh := frameHeader{
+ ContentSize: 0,
+ WindowSize: uint32(s.encoder.WindowSize(0)),
+ SingleSegment: false,
+ Checksum: e.o.crc,
+ DictID: 0,
+ }
+ dst, err := fh.appendTo(tmp[:0])
+ if err != nil {
+ return err
+ }
+ s.headerWritten = true
+ s.wWg.Wait()
+ var n2 int
+ n2, s.err = s.w.Write(dst)
+ if s.err != nil {
+ return s.err
+ }
+ s.nWritten += int64(n2)
+ }
+ if s.eofWritten {
+ // Ensure we only write it once.
+ final = false
+ }
+
+ if len(s.filling) == 0 {
+ // Final block, but no data.
+ if final {
+ enc := s.encoder
+ blk := enc.Block()
+ blk.reset(nil)
+ blk.last = true
+ blk.encodeRaw(nil)
+ s.wWg.Wait()
+ _, s.err = s.w.Write(blk.output)
+ s.nWritten += int64(len(blk.output))
+ s.eofWritten = true
+ }
+ return s.err
+ }
+
+ // Move blocks forward.
+ s.filling, s.current, s.previous = s.previous[:0], s.filling, s.current
+ s.wg.Add(1)
+ go func(src []byte) {
+ if debug {
+ println("Adding block,", len(src), "bytes, final:", final)
+ }
+ defer func() {
+ if r := recover(); r != nil {
+ s.err = fmt.Errorf("panic while encoding: %v", r)
+ rdebug.PrintStack()
+ }
+ s.wg.Done()
+ }()
+ enc := s.encoder
+ blk := enc.Block()
+ enc.Encode(blk, src)
+ blk.last = final
+ if final {
+ s.eofWritten = true
+ }
+ // Wait for pending writes.
+ s.wWg.Wait()
+ if s.writeErr != nil {
+ s.err = s.writeErr
+ return
+ }
+ // Transfer encoders from previous write block.
+ blk.swapEncoders(s.writing)
+ // Transfer recent offsets to next.
+ enc.UseBlock(s.writing)
+ s.writing = blk
+ s.wWg.Add(1)
+ go func() {
+ defer func() {
+ if r := recover(); r != nil {
+ s.writeErr = fmt.Errorf("panic while encoding/writing: %v", r)
+ rdebug.PrintStack()
+ }
+ s.wWg.Done()
+ }()
+ err := errIncompressible
+ // If we got the exact same number of literals as input,
+ // assume the literals cannot be compressed.
+ if len(src) != len(blk.literals) || len(src) != e.o.blockSize {
+ err = blk.encode(e.o.noEntropy)
+ }
+ switch err {
+ case errIncompressible:
+ if debug {
+ println("Storing incompressible block as raw")
+ }
+ blk.encodeRaw(src)
+ // In fast mode, we do not transfer offsets, so we don't have to deal with changing the.
+ case nil:
+ default:
+ s.writeErr = err
+ return
+ }
+ _, s.writeErr = s.w.Write(blk.output)
+ s.nWritten += int64(len(blk.output))
+ }()
+ }(s.current)
+ return nil
+}
+
+// ReadFrom reads data from r until EOF or error.
+// The return value n is the number of bytes read.
+// Any error except io.EOF encountered during the read is also returned.
+//
+// The Copy function uses ReaderFrom if available.
+func (e *Encoder) ReadFrom(r io.Reader) (n int64, err error) {
+ if debug {
+ println("Using ReadFrom")
+ }
+ // Maybe handle stuff queued?
+ e.state.filling = e.state.filling[:e.o.blockSize]
+ src := e.state.filling
+ for {
+ n2, err := r.Read(src)
+ _, _ = e.state.encoder.CRC().Write(src[:n2])
+ // src is now the unfilled part...
+ src = src[n2:]
+ n += int64(n2)
+ switch err {
+ case io.EOF:
+ e.state.filling = e.state.filling[:len(e.state.filling)-len(src)]
+ if debug {
+ println("ReadFrom: got EOF final block:", len(e.state.filling))
+ }
+ return n, e.nextBlock(true)
+ default:
+ if debug {
+ println("ReadFrom: got error:", err)
+ }
+ e.state.err = err
+ return n, err
+ case nil:
+ }
+ if len(src) > 0 {
+ if debug {
+ println("ReadFrom: got space left in source:", len(src))
+ }
+ continue
+ }
+ err = e.nextBlock(false)
+ if err != nil {
+ return n, err
+ }
+ e.state.filling = e.state.filling[:e.o.blockSize]
+ src = e.state.filling
+ }
+}
+
+// Flush will send the currently written data to output
+// and block until everything has been written.
+// This should only be used on rare occasions where pushing the currently queued data is critical.
+func (e *Encoder) Flush() error {
+ s := &e.state
+ if len(s.filling) > 0 {
+ err := e.nextBlock(false)
+ if err != nil {
+ return err
+ }
+ }
+ s.wg.Wait()
+ s.wWg.Wait()
+ if s.err != nil {
+ return s.err
+ }
+ return s.writeErr
+}
+
+// Close will flush the final output and close the stream.
+// The function will block until everything has been written.
+// The Encoder can still be re-used after calling this.
+func (e *Encoder) Close() error {
+ s := &e.state
+ if s.encoder == nil {
+ return nil
+ }
+ err := e.nextBlock(true)
+ if err != nil {
+ return err
+ }
+ s.wg.Wait()
+ s.wWg.Wait()
+
+ if s.err != nil {
+ return s.err
+ }
+ if s.writeErr != nil {
+ return s.writeErr
+ }
+
+ // Write CRC
+ if e.o.crc && s.err == nil {
+ // heap alloc.
+ var tmp [4]byte
+ _, s.err = s.w.Write(s.encoder.AppendCRC(tmp[:0]))
+ s.nWritten += 4
+ }
+
+ // Add padding with content from crypto/rand.Reader
+ if s.err == nil && e.o.pad > 0 {
+ add := calcSkippableFrame(s.nWritten, int64(e.o.pad))
+ frame, err := skippableFrame(s.filling[:0], add, rand.Reader)
+ if err != nil {
+ return err
+ }
+ _, s.err = s.w.Write(frame)
+ }
+ return s.err
+}
+
+// EncodeAll will encode all input in src and append it to dst.
+// This function can be called concurrently, but each call will only run on a single goroutine.
+// If empty input is given, nothing is returned, unless WithZeroFrames is specified.
+// Encoded blocks can be concatenated and the result will be the combined input stream.
+// Data compressed with EncodeAll can be decoded with the Decoder,
+// using either a stream or DecodeAll.
+func (e *Encoder) EncodeAll(src, dst []byte) []byte {
+ if len(src) == 0 {
+ if e.o.fullZero {
+ // Add frame header.
+ fh := frameHeader{
+ ContentSize: 0,
+ WindowSize: MinWindowSize,
+ SingleSegment: true,
+ // Adding a checksum would be a waste of space.
+ Checksum: false,
+ DictID: 0,
+ }
+ dst, _ = fh.appendTo(dst)
+
+ // Write raw block as last one only.
+ var blk blockHeader
+ blk.setSize(0)
+ blk.setType(blockTypeRaw)
+ blk.setLast(true)
+ dst = blk.appendTo(dst)
+ }
+ return dst
+ }
+ e.init.Do(func() {
+ e.o.setDefault()
+ e.initialize()
+ })
+ enc := <-e.encoders
+ defer func() {
+ // Release encoder reference to last block.
+ enc.Reset()
+ e.encoders <- enc
+ }()
+ enc.Reset()
+ blk := enc.Block()
+ // Use single segments when above minimum window and below 1MB.
+ single := len(src) < 1<<20 && len(src) > MinWindowSize
+ if e.o.single != nil {
+ single = *e.o.single
+ }
+ fh := frameHeader{
+ ContentSize: uint64(len(src)),
+ WindowSize: uint32(enc.WindowSize(len(src))),
+ SingleSegment: single,
+ Checksum: e.o.crc,
+ DictID: 0,
+ }
+
+ // If less than 1MB, allocate a buffer up front.
+ if len(dst) == 0 && cap(dst) == 0 && len(src) < 1<<20 {
+ dst = make([]byte, 0, len(src))
+ }
+ dst, err := fh.appendTo(dst)
+ if err != nil {
+ panic(err)
+ }
+
+ if len(src) <= e.o.blockSize && len(src) <= maxBlockSize {
+ // Slightly faster with no history and everything in one block.
+ if e.o.crc {
+ _, _ = enc.CRC().Write(src)
+ }
+ blk.reset(nil)
+ blk.last = true
+ enc.EncodeNoHist(blk, src)
+
+ // If we got the exact same number of literals as input,
+ // assume the literals cannot be compressed.
+ err := errIncompressible
+ oldout := blk.output
+ if len(blk.literals) != len(src) || len(src) != e.o.blockSize {
+ // Output directly to dst
+ blk.output = dst
+ err = blk.encode(e.o.noEntropy)
+ }
+
+ switch err {
+ case errIncompressible:
+ if debug {
+ println("Storing incompressible block as raw")
+ }
+ dst = blk.encodeRawTo(dst, src)
+ case nil:
+ dst = blk.output
+ default:
+ panic(err)
+ }
+ blk.output = oldout
+ } else {
+ for len(src) > 0 {
+ todo := src
+ if len(todo) > e.o.blockSize {
+ todo = todo[:e.o.blockSize]
+ }
+ src = src[len(todo):]
+ if e.o.crc {
+ _, _ = enc.CRC().Write(todo)
+ }
+ blk.reset(nil)
+ blk.pushOffsets()
+ enc.Encode(blk, todo)
+ if len(src) == 0 {
+ blk.last = true
+ }
+ err := errIncompressible
+ // If we got the exact same number of literals as input,
+ // assume the literals cannot be compressed.
+ if len(blk.literals) != len(todo) || len(todo) != e.o.blockSize {
+ err = blk.encode(e.o.noEntropy)
+ }
+
+ switch err {
+ case errIncompressible:
+ if debug {
+ println("Storing incompressible block as raw")
+ }
+ dst = blk.encodeRawTo(dst, todo)
+ blk.popOffsets()
+ case nil:
+ dst = append(dst, blk.output...)
+ default:
+ panic(err)
+ }
+ }
+ }
+ if e.o.crc {
+ dst = enc.AppendCRC(dst)
+ }
+ // Add padding with content from crypto/rand.Reader
+ if e.o.pad > 0 {
+ add := calcSkippableFrame(int64(len(dst)), int64(e.o.pad))
+ dst, err = skippableFrame(dst, add, rand.Reader)
+ if err != nil {
+ panic(err)
+ }
+ }
+ return dst
+}