diff --git a/adapters/__init__.py b/adapters/__init__.py
new file mode 100644
index 0000000..d67fcf2
--- /dev/null
+++ b/adapters/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present ADTRAN, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_common/__init__.py b/adapters/adtran_common/__init__.py
new file mode 100644
index 0000000..b0fb0b2
--- /dev/null
+++ b/adapters/adtran_common/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_common/adtran_device_handler.py b/adapters/adtran_common/adtran_device_handler.py
new file mode 100644
index 0000000..79877b7
--- /dev/null
+++ b/adapters/adtran_common/adtran_device_handler.py
@@ -0,0 +1,1438 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+Adtran generic VOLTHA device handler
+"""
+import argparse
+import datetime
+import shlex
+import time
+
+import structlog
+from twisted.internet import reactor, defer
+from twisted.internet.defer import inlineCallbacks, returnValue
+from twisted.python.failure import Failure
+
+from adapters.adtran_common.net.adtran_netconf import AdtranNetconfClient
+from adapters.adtran_common.net.adtran_rest import AdtranRestClient
+from pyvoltha.protos import third_party
+from pyvoltha.protos.common_pb2 import OperStatus, AdminState, ConnectStatus
+from pyvoltha.protos.logical_device_pb2 import LogicalDevice
+from pyvoltha.protos.openflow_13_pb2 import ofp_desc, ofp_switch_features, OFPC_PORT_STATS, \
+    OFPC_GROUP_STATS, OFPC_TABLE_STATS, OFPC_FLOW_STATS
+from pyvoltha.adapters.extensions.alarms.adapter_alarms import AdapterAlarms
+from pyvoltha.adapters.extensions.kpi.olt.olt_pm_metrics import OltPmMetrics
+from pyvoltha.common.utils.asleep import asleep
+from flow.flow_tables import DeviceFlows, DownstreamFlows
+
+_ = third_party
+
+DEFAULT_MULTICAST_VLAN = 4000
+BROADCOM_UNTAGGED_VLAN = 4091
+DEFAULT_UTILITY_VLAN = BROADCOM_UNTAGGED_VLAN
+
+_DEFAULT_RESTCONF_USERNAME = ""
+_DEFAULT_RESTCONF_PASSWORD = ""
+_DEFAULT_RESTCONF_PORT = 8081
+
+_DEFAULT_NETCONF_USERNAME = ""
+_DEFAULT_NETCONF_PASSWORD = ""
+_DEFAULT_NETCONF_PORT = 830
+
+_STARTUP_RETRY_TIMEOUT = 5       # 5 seconds delay after activate failed before we
+_DEFAULT_RESOURCE_MGR_KEY = "adtran"
+
+
+class AdtranDeviceHandler(object):
+    """
+    A device that supports the ADTRAN RESTCONF protocol for communications
+    with a VOLTHA/VANILLA managed device.
+    Port numbering guidelines for Adtran OLT devices.  Derived classes may augment
+    the numbering scheme below as needed.
+
+      - Reserve port 0 for the CPU capture port. All ports to/from this port should
+        be related to messages destined to/from the OpenFlow controller.
+
+      - Begin numbering northbound ports (network facing) at port 1 contiguously.
+        Consider the northbound ports to typically be the highest speed uplinks.
+        If these ports are removable or provided by one or more slots in a chassis
+        subsystem, still reserve the appropriate amount of port numbers whether they
+        are populated or not.
+
+      - Number southbound ports (customer facing) ports next starting at the next
+        available port number. If chassis based, follow the same rules as northbound
+        ports and reserve enough port numbers.
+
+      - Number any out-of-band management ports (if any) last.  It will be up to the
+        Device Adapter developer whether to expose these to openflow or not. If you do
+        not expose them, but do have the ports, still reserve the appropriate number of
+        port numbers just in case.
+    """
+    # HTTP shortcuts
+    HELLO_URI = '/restconf/adtran-hello:hello'
+
+    # RPC XML shortcuts
+    RESTART_RPC = '<system-restart xmlns="urn:ietf:params:xml:ns:yang:ietf-system"/>'
+
+    def __init__(self, **kwargs):
+        from net.pio_zmq import DEFAULT_PIO_TCP_PORT
+        from net.pon_zmq import DEFAULT_PON_AGENT_TCP_PORT
+
+        super(AdtranDeviceHandler, self).__init__()
+
+        adapter = kwargs['adapter']
+        device_id = kwargs['device-id']
+        timeout = kwargs.get('timeout', 20)
+
+        self.adapter = adapter
+        self.adapter_agent = adapter.adapter_agent
+        self.device_id = device_id
+        self.log = structlog.get_logger(device_id=device_id)
+        self.startup = None  # Startup/reboot deferred
+        self.channel = None  # Proxy messaging channel with 'send' method
+        self.logical_device_id = None
+        self.pm_metrics = None
+        self.alarms = None
+        self.multicast_vlans = [DEFAULT_MULTICAST_VLAN]
+        self.utility_vlan = DEFAULT_UTILITY_VLAN
+        self.mac_address = '00:13:95:00:00:00'
+        self._rest_support = None
+        self._initial_enable_complete = False
+        self.resource_mgr = None
+        self.tech_profiles = None       # dict():  intf_id -> ResourceMgr.TechProfile
+
+        # Northbound and Southbound ports
+        self.northbound_ports = {}  # port number -> Port
+        self.southbound_ports = {}  # port number -> Port  (For PON, use pon-id as key)
+        # self.management_ports = {}  # port number -> Port   TODO: Not currently supported
+
+        self.num_northbound_ports = None
+        self.num_southbound_ports = None
+        # self.num_management_ports = None
+
+        self.ip_address = None
+        self.host_and_port = None
+        self.timeout = timeout
+        self.restart_failure_timeout = 5 * 60   # 5 Minute timeout
+
+        # REST Client
+        self.rest_port = _DEFAULT_RESTCONF_PORT
+        self.rest_username = _DEFAULT_RESTCONF_USERNAME
+        self.rest_password = _DEFAULT_RESTCONF_PASSWORD
+        self._rest_client = None
+
+        # NETCONF Client
+        self.netconf_port = _DEFAULT_NETCONF_PORT
+        self.netconf_username = _DEFAULT_NETCONF_USERNAME
+        self.netconf_password = _DEFAULT_NETCONF_PASSWORD
+        self._netconf_client = None
+
+        # Flow entries
+        self.upstream_flows = DeviceFlows()
+        self.downstream_flows = DownstreamFlows()
+
+        self.max_nni_ports = 1  # TODO: This is a VOLTHA imposed limit in 'flow_decomposer.py
+        # and logical_device_agent.py
+
+        self.resource_manager_key = _DEFAULT_RESOURCE_MGR_KEY
+        # OMCI ZMQ Channel
+        self.pon_agent_port = DEFAULT_PON_AGENT_TCP_PORT
+        self.pio_port = DEFAULT_PIO_TCP_PORT
+
+        # Heartbeat support
+        self.heartbeat_count = 0
+        self.heartbeat_miss = 0
+        self.heartbeat_interval = 2  # TODO: Decrease before release or any scale testing
+        self.heartbeat_failed_limit = 3
+        self.heartbeat_timeout = 5
+        self.heartbeat = None
+        self.heartbeat_last_reason = ''
+
+        # Virtualized OLT Support
+        self.is_virtual_olt = False
+
+        # Installed flows
+        self._evcs = {}  # Flow ID/name -> FlowEntry
+
+    def _delete_logical_device(self):
+        ldi, self.logical_device_id = self.logical_device_id, None
+
+        if ldi is None:
+            return
+
+        self.log.debug('delete-logical-device', ldi=ldi)
+
+        logical_device = self.adapter_agent.get_logical_device(ldi)
+        self.adapter_agent.delete_logical_device(logical_device)
+
+        device = self.adapter_agent.get_device(self.device_id)
+        device.parent_id = ''
+
+        #  Update the logical device mapping
+        if ldi in self.adapter.logical_device_id_to_root_device_id:
+            del self.adapter.logical_device_id_to_root_device_id[ldi]
+
+    def __del__(self):
+        # Kill any startup or heartbeat defers
+
+        d, self.startup = self.startup, None
+        h, self.heartbeat = self.heartbeat, None
+
+        if d is not None and not d.called:
+            d.cancel()
+
+        if h is not None and not h.called:
+            h.cancel()
+
+        # Remove the logical device
+        self._delete_logical_device()
+
+        self.northbound_ports.clear()
+        self.southbound_ports.clear()
+
+    def __str__(self):
+        return "AdtranDeviceHandler: {}".format(self.ip_address)
+
+    @property
+    def netconf_client(self):
+        return self._netconf_client
+
+    @property
+    def rest_client(self):
+        return self._rest_client
+
+    @property
+    def evcs(self):
+        return list(self._evcs.values())
+
+    def add_evc(self, evc):
+        if self._evcs is not None and evc.name not in self._evcs:
+            self._evcs[evc.name] = evc
+
+    def remove_evc(self, evc):
+        if self._evcs is not None and evc.name in self._evcs:
+            del self._evcs[evc.name]
+
+    def parse_provisioning_options(self, device):
+        if device.ipv4_address:
+            self.ip_address = device.ipv4_address
+            self.host_and_port = '{}:{}'.format(self.ip_address,
+                                                self.netconf_port)
+        elif device.host_and_port:
+            self.host_and_port = device.host_and_port.split(":")
+            self.ip_address = self.host_and_port[0]
+            self.netconf_port = int(self.host_and_port[1])
+            self.adapter_agent.update_device(device)
+
+        else:
+            self.activate_failed(device, 'No IP_address field provided')
+
+        #############################################################
+        # Now optional parameters
+        def check_tcp_port(value):
+            ivalue = int(value)
+            if ivalue <= 0 or ivalue > 65535:
+                raise argparse.ArgumentTypeError("%s is a not a valid port number" % value)
+            return ivalue
+
+        def check_vid(value):
+            ivalue = int(value)
+            if ivalue < 1 or ivalue > 4094:
+                raise argparse.ArgumentTypeError("Valid VLANs are 1..4094")
+            return ivalue
+
+        parser = argparse.ArgumentParser(description='Adtran Device Adapter')
+        parser.add_argument('--nc_username', '-u', action='store', default=_DEFAULT_NETCONF_USERNAME,
+                            help='NETCONF username')
+        parser.add_argument('--nc_password', '-p', action='store', default=_DEFAULT_NETCONF_PASSWORD,
+                            help='NETCONF Password')
+        parser.add_argument('--nc_port', '-t', action='store', default=_DEFAULT_NETCONF_PORT,
+                            type=check_tcp_port, help='NETCONF TCP Port')
+        parser.add_argument('--rc_username', '-U', action='store', default=_DEFAULT_RESTCONF_USERNAME,
+                            help='REST username')
+        parser.add_argument('--rc_password', '-P', action='store', default=_DEFAULT_RESTCONF_PASSWORD,
+                            help='REST Password')
+        parser.add_argument('--rc_port', '-T', action='store', default=_DEFAULT_RESTCONF_PORT,
+                            type=check_tcp_port, help='RESTCONF TCP Port')
+        parser.add_argument('--zmq_port', '-z', action='store', default=DEFAULT_PON_AGENT_TCP_PORT,
+                            type=check_tcp_port, help='PON Agent ZeroMQ Port')
+        parser.add_argument('--pio_port', '-Z', action='store', default=DEFAULT_PIO_TCP_PORT,
+                            type=check_tcp_port, help='PIO Service ZeroMQ Port')
+        parser.add_argument('--multicast_vlan', '-M', action='store',
+                            default='{}'.format(DEFAULT_MULTICAST_VLAN),
+                            help='Multicast VLAN'),
+        parser.add_argument('--utility_vlan', '-B', action='store',
+                            default='{}'.format(DEFAULT_UTILITY_VLAN),
+                            type=check_vid, help='VLAN for Controller based upstream flows from ONUs')
+        parser.add_argument('--resource_mgr_key', '-o', action='store',
+                            default=_DEFAULT_RESOURCE_MGR_KEY,
+                            help='OLT Type to look up associated resource manager configuration')
+        try:
+            args = parser.parse_args(shlex.split(device.extra_args))
+
+            # May have multiple multicast VLANs
+            self.multicast_vlans = [int(vid.strip()) for vid in args.multicast_vlan.split(',')]
+
+            self.netconf_username = args.nc_username
+            self.netconf_password = args.nc_password
+            self.netconf_port = args.nc_port
+
+            self.rest_username = args.rc_username
+            self.rest_password = args.rc_password
+            self.rest_port = args.rc_port
+
+            self.pon_agent_port = args.zmq_port
+            self.pio_port = args.pio_port
+            self.resource_manager_key = args.resource_mgr_key
+
+            if not self.rest_username:
+                self.rest_username = 'NDE0NDRkNDk0ZQ==\n'. \
+                    decode('base64').decode('hex')
+            if not self.rest_password:
+                self.rest_password = 'NTA0MTUzNTM1NzRmNTI0NA==\n'. \
+                    decode('base64').decode('hex')
+            if not self.netconf_username:
+                self.netconf_username = 'Njg3Mzc2NzI2ZjZmNzQ=\n'. \
+                    decode('base64').decode('hex')
+            if not self.netconf_password:
+                self.netconf_password = 'NDI0ZjUzNDM0Zg==\n'. \
+                    decode('base64').decode('hex')
+
+        except argparse.ArgumentError as e:
+            self.activate_failed(device,
+                                 'Invalid arguments: {}'.format(e.message),
+                                 reachable=False)
+        except Exception as e:
+            self.log.exception('option_parsing_error: {}'.format(e.message))
+
+    @inlineCallbacks
+    def activate(self, done_deferred, reconciling):
+        """
+        Activate the OLT device
+
+        :param done_deferred: (Deferred) Deferred to fire when done
+        :param reconciling: If True, this adapter is taking over for a previous adapter
+                            for an existing OLT
+        """
+        self.log.info('AdtranDeviceHandler.activating', reconciling=reconciling)
+
+        if self.logical_device_id is None:
+            device = self.adapter_agent.get_device(self.device_id)
+
+            try:
+                # Parse our command line options for this device
+                self.parse_provisioning_options(device)
+
+                ############################################################################
+                # Currently, only virtual OLT (pizzabox) is supported
+                # self.is_virtual_olt = Add test for MOCK Device if we want to support it
+
+                ############################################################################
+                # Start initial discovery of NETCONF support (if any)
+                try:
+                    device.reason = 'establishing NETCONF connection'
+                    self.adapter_agent.update_device(device)
+
+                    self.startup = self.make_netconf_connection()
+                    yield self.startup
+
+                except Exception as e:
+                    self.log.exception('netconf-connection', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                ############################################################################
+                # Update access information on network device for full protocol support
+                try:
+                    device.reason = 'device networking validation'
+                    self.adapter_agent.update_device(device)
+                    self.startup = self.ready_network_access()
+                    yield self.startup
+
+                except Exception as e:
+                    self.log.exception('network-setup', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                ############################################################################
+                # Restconf setup
+                try:
+                    device.reason = 'establishing RESTConf connections'
+                    self.adapter_agent.update_device(device)
+                    self.startup = self.make_restconf_connection()
+                    yield self.startup
+
+                except Exception as e:
+                    self.log.exception('restconf-setup', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                ############################################################################
+                # Get the device Information
+                if reconciling:
+                    device.connect_status = ConnectStatus.REACHABLE
+                    self.adapter_agent.update_device(device)
+                else:
+                    try:
+                        device.reason = 'retrieving device information'
+                        self.adapter_agent.update_device(device)
+                        self.startup = self.get_device_info(device)
+                        results = yield self.startup
+
+                        device.model = results.get('model', 'unknown')
+                        device.hardware_version = results.get('hardware_version', 'unknown')
+                        device.firmware_version = results.get('firmware_version', 'unknown')
+                        device.serial_number = results.get('serial_number', 'unknown')
+                        device.images.image.extend(results.get('software-images', []))
+
+                        device.root = True
+                        device.vendor = results.get('vendor', 'Adtran Inc.')
+                        device.connect_status = ConnectStatus.REACHABLE
+                        self.adapter_agent.update_device(device)
+
+                    except Exception as e:
+                        self.log.exception('device-info', e=e)
+                        returnValue(self.restart_activate(done_deferred, reconciling))
+
+                try:
+                    # Enumerate and create Northbound NNI interfaces
+                    device.reason = 'enumerating northbound interfaces'
+                    self.adapter_agent.update_device(device)
+                    self.startup = self.enumerate_northbound_ports(device)
+                    results = yield self.startup
+
+                    self.startup = self.process_northbound_ports(device, results)
+                    yield self.startup
+
+                    device.reason = 'adding northbound interfaces to adapter'
+                    self.adapter_agent.update_device(device)
+
+                    if not reconciling:
+                        for port in self.northbound_ports.itervalues():
+                            self.adapter_agent.add_port(device.id, port.get_port())
+
+                except Exception as e:
+                    self.log.exception('NNI-enumeration', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                try:
+                    # Enumerate and create southbound interfaces
+                    device.reason = 'enumerating southbound interfaces'
+                    self.adapter_agent.update_device(device)
+                    self.startup = self.enumerate_southbound_ports(device)
+                    results = yield self.startup
+
+                    self.startup = self.process_southbound_ports(device, results)
+                    yield self.startup
+
+                    device.reason = 'adding southbound interfaces to adapter'
+                    self.adapter_agent.update_device(device)
+
+                    if not reconciling:
+                        for port in self.southbound_ports.itervalues():
+                            self.adapter_agent.add_port(device.id, port.get_port())
+
+                except Exception as e:
+                    self.log.exception('PON_enumeration', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                # Initialize resource manager
+                self.initialize_resource_manager()
+
+                if reconciling:
+                    if device.admin_state == AdminState.ENABLED:
+                        if device.parent_id:
+                            self.logical_device_id = device.parent_id
+                            self.adapter_agent.reconcile_logical_device(device.parent_id)
+                        else:
+                            self.log.info('no-logical-device-set')
+
+                    # Reconcile child devices
+                    self.adapter_agent.reconcile_child_devices(device.id)
+                    ld_initialized = self.adapter_agent.get_logical_device()
+                    assert device.parent_id == ld_initialized.id, \
+                        'parent ID not Logical device ID'
+
+                else:
+                    # Complete activation by setting up logical device for this OLT and saving
+                    # off the devices parent_id
+                    ld_initialized = self.create_logical_device(device)
+
+                ############################################################################
+                # Setup PM configuration for this device
+                if self.pm_metrics is None:
+                    try:
+                        device.reason = 'setting up Performance Monitoring configuration'
+                        self.adapter_agent.update_device(device)
+
+                        kwargs = {
+                            'nni-ports': self.northbound_ports.values(),
+                            'pon-ports': self.southbound_ports.values()
+                        }
+                        self.pm_metrics = OltPmMetrics(self.adapter_agent, self.device_id,
+                                                       ld_initialized.id, grouped=True,
+                                                       freq_override=False, **kwargs)
+
+                        pm_config = self.pm_metrics.make_proto()
+                        self.log.debug("initial-pm-config", pm_config=pm_config)
+                        self.adapter_agent.update_device_pm_config(pm_config, init=True)
+
+                    except Exception as e:
+                        self.log.exception('pm-setup', e=e)
+                        self.activate_failed(device, e.message, reachable=False)
+
+                ############################################################################
+                # Set the ports in a known good initial state
+                if not reconciling:
+                    device.reason = 'setting device to a known initial state'
+                    self.adapter_agent.update_device(device)
+                    try:
+                        for port in self.northbound_ports.itervalues():
+                            self.startup = yield port.reset()
+
+                        for port in self.southbound_ports.itervalues():
+                            self.startup = yield port.reset()
+
+                    except Exception as e:
+                        self.log.exception('port-reset', e=e)
+                        returnValue(self.restart_activate(done_deferred, reconciling))
+
+                ############################################################################
+                # Create logical ports for all southbound and northbound interfaces
+                try:
+                    device.reason = 'creating logical ports'
+                    self.adapter_agent.update_device(device)
+                    self.startup = self.create_logical_ports(device, ld_initialized, reconciling)
+                    yield self.startup
+
+                except Exception as e:
+                    self.log.exception('logical-port', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                ############################################################################
+                # Setup Alarm handler
+                device.reason = 'setting up adapter alarms'
+                self.adapter_agent.update_device(device)
+
+                self.alarms = AdapterAlarms(self.adapter_agent, device.id, ld_initialized.id)
+
+                ############################################################################
+                # Register for ONU detection
+                # self.adapter_agent.register_for_onu_detect_state(device.id)
+                # Complete device specific steps
+                try:
+                    self.log.debug('device-activation-procedures')
+                    device.reason = 'performing model specific activation procedures'
+                    self.adapter_agent.update_device(device)
+                    self.startup = self.complete_device_specific_activation(device, reconciling)
+                    yield self.startup
+
+                except Exception as e:
+                    self.log.exception('device-activation-procedures', e=e)
+                    returnValue(self.restart_activate(done_deferred, reconciling))
+
+                # Schedule the heartbeat for the device
+                self.log.debug('starting-heartbeat')
+                self.start_heartbeat(delay=10)
+
+                device = self.adapter_agent.get_device(device.id)
+                device.parent_id = ld_initialized.id
+                device.oper_status = OperStatus.ACTIVE
+                device.reason = ''
+                self.adapter_agent.update_device(device)
+                self.logical_device_id = ld_initialized.id
+
+                # Start collecting stats from the device after a brief pause
+                reactor.callLater(10, self.pm_metrics.start_collector)
+
+                # Signal completion
+                self._initial_enable_complete = True
+                self.log.info('activated')
+
+            except Exception as e:
+                self.log.exception('activate', e=e)
+                if done_deferred is not None:
+                    done_deferred.errback(e)
+
+        if done_deferred is not None:
+            done_deferred.callback('activated')
+
+        returnValue('activated')
+
+    def restart_activate(self, done_deferred, reconciling):
+        """
+        Startup activation failed, pause a short period of time and retry
+
+        :param done_deferred: (deferred) Deferred to fire upon completion of activation
+        :param reconciling: (bool) If true, we are reconciling after moving to a new vCore
+        """
+        d, self.startup = self.startup, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+        device = self.adapter_agent.get_device(self.device_id)
+        device.reason = 'Failed during {}, retrying'.format(device.reason)
+        self.adapter_agent.update_device(device)
+        self.startup = reactor.callLater(_STARTUP_RETRY_TIMEOUT, self.activate,
+                                         done_deferred, reconciling)
+        return 'retrying'
+
+    @inlineCallbacks
+    def ready_network_access(self):
+        # Override in device specific class if needed
+        returnValue('nop')
+
+    def activate_failed(self, device, reason, reachable=True):
+        """
+        Activation process (adopt_device) has failed.
+
+        :param device:  A voltha.Device object, with possible device-type
+                        specific extensions. Such extensions shall be described as part of
+                        the device type specification returned by device_types().
+        :param reason: (string) failure reason
+        :param reachable: (boolean) Flag indicating if device may be reachable
+                                    via RESTConf or NETConf even after this failure.
+        """
+        device.oper_status = OperStatus.FAILED
+        if not reachable:
+            device.connect_status = ConnectStatus.UNREACHABLE
+
+        device.reason = reason
+        self.adapter_agent.update_device(device)
+        raise Exception('Failed to activate OLT: {}'.format(device.reason))
+
+    @inlineCallbacks
+    def make_netconf_connection(self, connect_timeout=None,
+                                close_existing_client=False):
+
+        if close_existing_client and self._netconf_client is not None:
+            try:
+                yield self._netconf_client.close()
+            except:
+                pass
+            self._netconf_client = None
+
+        client = self._netconf_client
+
+        if client is None:
+            if not self.is_virtual_olt:
+                client = AdtranNetconfClient(self.ip_address,
+                                             self.netconf_port,
+                                             self.netconf_username,
+                                             self.netconf_password,
+                                             self.timeout)
+            else:
+                from python.adapters.adtran.adtran_common.net.mock_netconf_client import MockNetconfClient
+                client = MockNetconfClient(self.ip_address,
+                                           self.netconf_port,
+                                           self.netconf_username,
+                                           self.netconf_password,
+                                           self.timeout)
+        if client.connected:
+            self._netconf_client = client
+            returnValue(True)
+
+        timeout = connect_timeout or self.timeout
+
+        try:
+            request = client.connect(timeout)
+            results = yield request
+            self._netconf_client = client
+            returnValue(results)
+
+        except Exception as e:
+            self.log.exception('Failed to create NETCONF Client', e=e)
+            self._netconf_client = None
+            raise
+
+    @inlineCallbacks
+    def make_restconf_connection(self, get_timeout=None):
+        client = self._rest_client
+
+        if client is None:
+            client = AdtranRestClient(self.ip_address,
+                                      self.rest_port,
+                                      self.rest_username,
+                                      self.rest_password,
+                                      self.timeout)
+
+        timeout = get_timeout or self.timeout
+
+        try:
+            request = client.request('GET', self.HELLO_URI, name='hello', timeout=timeout)
+            results = yield request
+            if isinstance(results, dict) and 'module-info' in results:
+                self._rest_client = client
+                returnValue(results)
+            else:
+                from twisted.internet.error import ConnectError
+                self._rest_client = None
+                raise ConnectError(string='Results received but unexpected data type or contents')
+        except Exception:
+            self._rest_client = None
+            raise
+
+    def create_logical_device(self, device):
+        version = device.images.image[0].version
+
+        ld = LogicalDevice(
+            # NOTE: not setting id and datapath_id will let the adapter agent pick id
+            desc=ofp_desc(mfr_desc='VOLTHA Project',
+                          hw_desc=device.hardware_version,
+                          sw_desc=version,
+                          serial_num=device.serial_number,
+                          dp_desc='n/a'),
+            switch_features=ofp_switch_features(n_buffers=256,
+                                                n_tables=2,
+                                                capabilities=(
+                                                        OFPC_FLOW_STATS |
+                                                        OFPC_TABLE_STATS |
+                                                        OFPC_GROUP_STATS |
+                                                        OFPC_PORT_STATS)),
+            root_device_id=device.id)
+
+        ld_initialized = self.adapter_agent.create_logical_device(ld,
+                                                                  dpid=self.mac_address)
+        return ld_initialized
+
+    @inlineCallbacks
+    def create_logical_ports(self, device, ld_initialized, reconciling):
+        if not reconciling:
+            # Add the ports to the logical device
+
+            for port in self.northbound_ports.itervalues():
+                lp = port.get_logical_port()
+                if lp is not None:
+                    self.adapter_agent.add_logical_port(ld_initialized.id, lp)
+
+            for port in self.southbound_ports.itervalues():
+                lp = port.get_logical_port()
+                if lp is not None:
+                    self.adapter_agent.add_logical_port(ld_initialized.id, lp)
+
+            # Clean up all EVCs, EVC maps and ACLs (exceptions are ok)
+            try:
+                from flow.evc import EVC
+                self.startup = yield EVC.remove_all(self.netconf_client)
+                from flow.utility_evc import UtilityEVC
+                self.startup = yield UtilityEVC.remove_all(self.netconf_client)
+
+            except Exception as e:
+                self.log.exception('evc-cleanup', e=e)
+
+            try:
+                from flow.evc_map import EVCMap
+                self.startup = yield EVCMap.remove_all(self.netconf_client)
+
+            except Exception as e:
+                self.log.exception('evc-map-cleanup', e=e)
+
+            from flow.acl import ACL
+            ACL.clear_all(device.id)
+            try:
+                self.startup = yield ACL.remove_all(self.netconf_client)
+
+            except Exception as e:
+                self.log.exception('acl-cleanup', e=e)
+
+            from flow.flow_entry import FlowEntry
+            FlowEntry.clear_all(self)
+
+            from download import Download
+            Download.clear_all(self.netconf_client)
+
+        # Start/stop the interfaces as needed. These are deferred calls
+
+        dl = []
+        for port in self.northbound_ports.itervalues():
+            try:
+                dl.append(port.start())
+            except Exception as e:
+                self.log.exception('northbound-port-startup', e=e)
+
+        for port in self.southbound_ports.itervalues():
+            try:
+                dl.append(port.start() if port.admin_state == AdminState.ENABLED else port.stop())
+
+            except Exception as e:
+                self.log.exception('southbound-port-startup', e=e)
+
+        results = yield defer.gatherResults(dl, consumeErrors=True)
+
+        returnValue(results)
+
+    @inlineCallbacks
+    def device_information(self, device):
+        """
+        Examine the various managment models and extract device information for
+        VOLTHA use
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :return: (Deferred or None).
+        """
+        yield defer.Deferred(lambda c: c.callback("Not Required"))
+
+    @inlineCallbacks
+    def enumerate_northbound_ports(self, device):
+        """
+        Enumerate all northbound ports of a device. You should override
+        a non-recoverable error, throw an appropriate exception.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :return: (Deferred or None).
+        """
+        yield defer.Deferred(lambda c: c.callback("Not Required"))
+
+    @inlineCallbacks
+    def process_northbound_ports(self, device, results):
+        """
+        Process the results from the 'enumerate_northbound_ports' method.
+        You should override this method in your derived class as necessary and
+        create an NNI Port object (of your own choosing) that supports a 'get_port'
+        method. Once created, insert it into this base class's northbound_ports
+        collection.
+
+        Should you encounter a non-recoverable error, throw an appropriate exception.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :param results: Results from the 'enumerate_northbound_ports' method that
+                you implemented. The type and contents are up to you to
+        :return:
+        """
+        yield defer.Deferred(lambda c: c.callback("Not Required"))
+
+    @inlineCallbacks
+    def enumerate_southbound_ports(self, device):
+        """
+        Enumerate all southbound ports of a device. You should override
+        this method in your derived class as necessary. Should you encounter
+        a non-recoverable error, throw an appropriate exception.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :return: (Deferred or None).
+        """
+        yield defer.Deferred(lambda c: c.callback("Not Required"))
+
+    @inlineCallbacks
+    def process_southbound_ports(self, device, results):
+        """
+        Process the results from the 'enumerate_southbound_ports' method.
+        You should override this method in your derived class as necessary and
+        create an Port object (of your own choosing) that supports a 'get_port'
+        method. Once created, insert it into this base class's southbound_ports
+        collection.
+
+        Should you encounter a non-recoverable error, throw an appropriate exception.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :param results: Results from the 'enumerate_southbound_ports' method that
+                you implemented. The type and contents are up to you to
+        :return:
+        """
+        yield defer.Deferred(lambda c: c.callback("Not Required"))
+
+    # TODO: Move some of the items below from here and the EVC to a utility class
+
+    def is_nni_port(self, port):
+        return port in self.northbound_ports
+
+    def is_uni_port(self, port):
+        raise NotImplementedError('implement in derived class')
+
+    def is_pon_port(self, port):
+        raise NotImplementedError('implement in derived class')
+
+    def is_logical_port(self, port):
+        return not self.is_nni_port(port) and not self.is_uni_port(port) and not self.is_pon_port(port)
+
+    def get_port_name(self, port):
+        raise NotImplementedError('implement in derived class')
+
+    def initialize_resource_manager(self):
+        raise NotImplementedError('implement in derived class')
+
+    @inlineCallbacks
+    def complete_device_specific_activation(self, _device, _reconciling):
+        # NOTE: Override this in your derived class for any device startup completion
+        return defer.succeed('NOP')
+
+    @inlineCallbacks
+    def disable(self):
+        """
+        This is called when a previously enabled device needs to be disabled based on a NBI call.
+        """
+        self.log.info('disabling', device_id=self.device_id)
+
+        # Cancel any running enable/disable/... in progress
+        d, self.startup = self.startup, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+        # Get the latest device reference
+        device = self.adapter_agent.get_device(self.device_id)
+        device.reason = 'Disabling'
+        self.adapter_agent.update_device(device)
+
+        # Drop registration for ONU detection
+        # self.adapter_agent.unregister_for_onu_detect_state(self.device.id)
+        # Suspend any active healthchecks / pings
+
+        h, self.heartbeat = self.heartbeat, None
+        try:
+            if h is not None and not h.called:
+                h.cancel()
+        except:
+            pass
+        # Update the operational status to UNKNOWN
+
+        device.oper_status = OperStatus.UNKNOWN
+        device.connect_status = ConnectStatus.UNREACHABLE
+        self.adapter_agent.update_device(device)
+
+        # Disable all child devices first
+        self.adapter_agent.update_child_devices_state(self.device_id,
+                                                      admin_state=AdminState.DISABLED)
+
+        # Remove the peer references from this device
+        self.adapter_agent.delete_all_peer_references(self.device_id)
+
+        # Remove the logical device to clear out logical device ports for any
+        # previously activated ONUs
+        self._delete_logical_device()
+
+        # Set all ports to disabled
+        self.adapter_agent.disable_all_ports(self.device_id)
+
+        dl = []
+        for port in self.northbound_ports.itervalues():
+            dl.append(port.stop())
+
+        for port in self.southbound_ports.itervalues():
+            dl.append(port.stop())
+
+        # NOTE: Flows removed before this method is called
+        # Wait for completion
+
+        self.startup = defer.gatherResults(dl, consumeErrors=True)
+        yield self.startup
+
+        if self.netconf_client:
+            self.netconf_client.close()
+
+        self._netconf_client = None
+        self._rest_client = None
+
+        device.reason = ''
+        self.adapter_agent.update_device(device)
+        self.log.info('disabled', device_id=device.id)
+        returnValue(None)
+
+    @inlineCallbacks
+    def reenable(self, done_deferred=None):
+        """
+        This is called when a previously disabled device needs to be enabled based on a NBI call.
+        :param done_deferred: (Deferred) Deferred to fire when done
+        """
+        self.log.info('re-enabling', device_id=self.device_id)
+
+        # Cancel any running enable/disable/... in progress
+        d, self.startup = self.startup, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+        if not self._initial_enable_complete:
+            # Never contacted the device on the initial startup, do 'activate' steps instead
+            self.startup = reactor.callLater(0, self.activate, done_deferred, False)
+            returnValue('activating')
+
+        # Get the latest device reference
+        device = self.adapter_agent.get_device(self.device_id)
+
+        # Update the connect status to REACHABLE
+        device.connect_status = ConnectStatus.REACHABLE
+        device.oper_status = OperStatus.ACTIVATING
+        self.adapter_agent.update_device(device)
+
+        # Reenable any previously configured southbound ports
+        for port in self.southbound_ports.itervalues():
+            self.log.debug('reenable-pon-port', pon_id=port.pon_id)
+            port.enabled = True
+
+        # Flows should not exist on re-enable. They are re-pushed
+        if len(self._evcs):
+            self.log.warn('evcs-found', evcs=self._evcs)
+        self._evcs.clear()
+
+        try:
+            yield self.make_restconf_connection()
+
+        except Exception as e:
+            self.log.exception('adtran-hello-reconnect', e=e)
+
+        try:
+            yield self.make_netconf_connection()
+
+        except Exception as e:
+            self.log.exception('NETCONF-re-connection', e=e)
+
+        # Recreate the logical device
+        # NOTE: This causes a flow update event
+        ld_initialized = self.create_logical_device(device)
+
+        # Create logical ports for all southbound and northbound interfaces
+        try:
+            self.startup = self.create_logical_ports(device, ld_initialized, False)
+            yield self.startup
+
+        except Exception as e:
+            self.log.exception('logical-port-creation', e=e)
+
+        device = self.adapter_agent.get_device(device.id)
+        device.parent_id = ld_initialized.id
+        device.oper_status = OperStatus.ACTIVE
+        device.reason = ''
+        self.logical_device_id = ld_initialized.id
+
+        # update device active status now
+        self.adapter_agent.update_device(device)
+
+        # Reenable all child devices
+        self.adapter_agent.update_child_devices_state(device.id,
+                                                      admin_state=AdminState.ENABLED)
+        # Schedule the heartbeat for the device
+        self.log.debug('starting-heartbeat')
+        self.start_heartbeat(delay=5)
+
+        self.log.info('re-enabled', device_id=device.id)
+
+        if done_deferred is not None:
+            done_deferred.callback('Done')
+
+        returnValue('reenabled')
+
+    @inlineCallbacks
+    def reboot(self):
+        """
+        This is called to reboot a device based on a NBI call.  The admin state of the device
+        will not change after the reboot.
+        """
+        self.log.debug('reboot')
+
+        if not self._initial_enable_complete:
+            # Never contacted the device on the initial startup, do 'activate' steps instead
+            returnValue('failed')
+
+        # Cancel any running enable/disable/... in progress
+        d, self.startup = self.startup, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+        # Issue reboot command
+
+        if not self.is_virtual_olt:
+            try:
+                yield self.netconf_client.rpc(AdtranDeviceHandler.RESTART_RPC)
+
+            except Exception as e:
+                self.log.exception('NETCONF-shutdown', e=e)
+                returnValue(defer.fail(Failure()))
+
+        # self.adapter_agent.unregister_for_onu_detect_state(self.device.id)
+
+        # Update the operational status to ACTIVATING and connect status to
+        # UNREACHABLE
+
+        device = self.adapter_agent.get_device(self.device_id)
+        previous_oper_status = device.oper_status
+        previous_conn_status = device.connect_status
+        device.oper_status = OperStatus.ACTIVATING
+        device.connect_status = ConnectStatus.UNREACHABLE
+        self.adapter_agent.update_device(device)
+
+        # Update the child devices connect state to UNREACHABLE
+        self.adapter_agent.update_child_devices_state(self.device_id,
+                                                      connect_status=ConnectStatus.UNREACHABLE)
+
+        # Shutdown communications with OLT. Typically it takes about 2 seconds
+        # or so after the reply before the restart actually occurs
+
+        try:
+            response = yield self.netconf_client.close()
+            self.log.debug('Restart response XML was: {}'.format('ok' if response.ok else 'bad'))
+
+        except Exception as e:
+            self.log.exception('NETCONF-client-shutdown', e=e)
+
+        # Clear off clients
+
+        self._netconf_client = None
+        self._rest_client = None
+
+        # Run remainder of reboot process as a new task. The OLT then may be up in a
+        # few moments or may take 3 minutes or more depending on any self tests enabled
+
+        current_time = time.time()
+        timeout = current_time + self.restart_failure_timeout
+
+        self.startup = reactor.callLater(10, self._finish_reboot, timeout,
+                                         previous_oper_status,
+                                         previous_conn_status)
+        returnValue(self.startup)
+
+    @inlineCallbacks
+    def _finish_reboot(self, timeout, previous_oper_status, previous_conn_status):
+        # Now wait until REST & NETCONF are re-established or we timeout
+
+        self.log.info('Resuming-activity',
+                      remaining=timeout - time.time(), timeout=timeout, current=time.time())
+
+        if self.rest_client is None:
+            try:
+                yield self.make_restconf_connection(get_timeout=10)
+
+            except Exception:
+                self.log.debug('No RESTCONF connection yet')
+                self._rest_client = None
+
+        if self.netconf_client is None:
+            try:
+                yield self.make_netconf_connection(connect_timeout=10)
+
+            except Exception as e:
+                try:
+                    if self.netconf_client is not None:
+                        yield self.netconf_client.close()
+                except Exception as e:
+                    self.log.exception(e.message)
+                finally:
+                    self._netconf_client = None
+
+        if (self.netconf_client is None and not self.is_virtual_olt) or self.rest_client is None:
+            current_time = time.time()
+            if current_time < timeout:
+                self.startup = reactor.callLater(5, self._finish_reboot, timeout,
+                                                 previous_oper_status,
+                                                 previous_conn_status)
+                returnValue(self.startup)
+
+            if self.netconf_client is None and not self.is_virtual_olt:
+                self.log.error('NETCONF-restore-failure')
+                pass        # TODO: What is best course of action if cannot get clients back?
+
+            if self.rest_client is None:
+                self.log.error('RESTCONF-restore-failure')
+                pass        # TODO: What is best course of action if cannot get clients back?
+
+        # Pause additional 5 seconds to let allow OLT microservices to complete some more initialization
+        yield asleep(5)
+        # TODO: Update device info. The software images may have changed...
+        # Get the latest device reference
+
+        device = self.adapter_agent.get_device(self.device_id)
+        device.oper_status = previous_oper_status
+        device.connect_status = previous_conn_status
+        self.adapter_agent.update_device(device)
+
+        # Update the child devices connect state to REACHABLE
+        self.adapter_agent.update_child_devices_state(self.device_id,
+                                                      connect_status=ConnectStatus.REACHABLE)
+        # Restart ports to previous state
+        dl = []
+
+        for port in self.northbound_ports.itervalues():
+            dl.append(port.restart())
+
+        for port in self.southbound_ports.itervalues():
+            dl.append(port.restart())
+
+        try:
+            yield defer.gatherResults(dl, consumeErrors=True)
+
+        except Exception as e:
+            self.log.exception('port-restart', e=e)
+
+        # Re-subscribe for ONU detection
+        # self.adapter_agent.register_for_onu_detect_state(self.device.id)
+        # Request reflow of any EVC/EVC-MAPs
+        if len(self._evcs) > 0:
+            dl = []
+            for evc in self.evcs:
+                dl.append(evc.reflow())
+
+            try:
+                yield defer.gatherResults(dl)
+            except Exception as e:
+                self.log.exception('flow-restart', e=e)
+
+        self.log.info('rebooted', device_id=self.device_id)
+        returnValue('Rebooted')
+
+    @inlineCallbacks
+    def delete(self):
+        """
+        This is called to delete a device from the PON based on a NBI call.
+        If the device is an OLT then the whole PON will be deleted.
+        """
+        self.log.info('deleting', device_id=self.device_id)
+
+        # Cancel any outstanding tasks
+
+        d, self.startup = self.startup, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+        h, self.heartbeat = self.heartbeat, None
+        try:
+            if h is not None and not h.called:
+                h.cancel()
+        except:
+            pass
+
+        # Get the latest device reference
+        device = self.adapter_agent.get_device(self.device_id)
+        device.reason = 'Deleting'
+        self.adapter_agent.update_device(device)
+
+        # self.adapter_agent.unregister_for_onu_detect_state(self.device.id)
+
+        # Remove all flows from the device
+        # TODO: Create a bulk remove-all by device-id
+
+        evcs = self._evcs
+        self._evcs.clear()
+
+        for evc in evcs:
+            evc.delete()   # TODO: implement bulk-flow procedures
+
+        # Remove all child devices
+        self.adapter_agent.delete_all_child_devices(self.device_id)
+
+        # Remove the logical device (should already be gone if disable came first)
+        self._delete_logical_device()
+
+        # Remove the peer references from this device
+        self.adapter_agent.delete_all_peer_references(self.device_id)
+
+        # Tell all ports to stop any background processing
+
+        for port in self.northbound_ports.itervalues():
+            port.delete()
+
+        for port in self.southbound_ports.itervalues():
+            port.delete()
+
+        self.northbound_ports.clear()
+        self.southbound_ports.clear()
+
+        # Shutdown communications with OLT
+
+        if self.netconf_client is not None:
+            try:
+                yield self.netconf_client.close()
+            except Exception as e:
+                self.log.exception('NETCONF-shutdown', e=e)
+
+            self._netconf_client = None
+
+        self._rest_client = None
+        mgr, self.resource_mgr = self.resource_mgr, None
+        if mgr is not None:
+            del mgr
+
+        self.log.info('deleted', device_id=self.device_id)
+
+    def delete_child_device(self, proxy_address):
+        self.log.debug('sending-deactivate-onu',
+                       olt_device_id=self.device_id,
+                       proxy_address=proxy_address)
+        try:
+            children = self.adapter_agent.get_child_devices(self.device_id)
+            for child in children:
+                if child.proxy_address.onu_id == proxy_address.onu_id and \
+                        child.proxy_address.channel_id == proxy_address.channel_id:
+                    self.adapter_agent.delete_child_device(self.device_id,
+                                                           child.id,
+                                                           onu_device=child)
+                    break
+
+        except Exception as e:
+            self.log.error('adapter_agent error', error=e)
+
+    def packet_out(self, egress_port, msg):
+        raise NotImplementedError('Overload in a derived class')
+
+    def update_pm_config(self, device, pm_config):
+        # TODO: This has not been tested
+        self.log.info('update_pm_config', pm_config=pm_config)
+        self.pm_metrics.update(pm_config)
+
+    @inlineCallbacks
+    def get_device_info(self, device):
+        """
+        Perform an initial network operation to discover the device hardware
+        and software version. Serial Number would be helpful as well.
+
+        Upon successfully retrieving the information, remember to call the
+        'start_heartbeat' method to keep in contact with the device being managed
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions. Such extensions shall be described as part of
+                the device type specification returned by device_types().
+        """
+        device = {}
+        returnValue(device)
+
+    def start_heartbeat(self, delay=10):
+        assert delay > 1, 'Minimum heartbeat is 1 second'
+        self.log.info('Starting-Device-Heartbeat ***')
+        self.heartbeat = reactor.callLater(delay, self.check_pulse)
+        return self.heartbeat
+
+    def check_pulse(self):
+        if self.logical_device_id is not None:
+            try:
+                self.heartbeat = self.rest_client.request('GET', self.HELLO_URI,
+                                                          name='hello', timeout=5)
+                self.heartbeat.addCallbacks(self._heartbeat_success, self._heartbeat_fail)
+
+            except Exception as e:
+                self.heartbeat = reactor.callLater(5, self._heartbeat_fail, e)
+
+    def on_heatbeat_alarm(self, active):
+        if active and self.netconf_client is None or not self.netconf_client.connected:
+            self.make_netconf_connection(close_existing_client=True)
+
+    def heartbeat_check_status(self, _):
+        """
+        Check the number of heartbeat failures against the limit and emit an alarm if needed
+        """
+        device = self.adapter_agent.get_device(self.device_id)
+
+        try:
+            from pyvoltha.adapters.extensions.alarms.heartbeat_alarm import HeartbeatAlarm
+
+            if self.heartbeat_miss >= self.heartbeat_failed_limit:
+                if device.connect_status == ConnectStatus.REACHABLE:
+                    self.log.warning('heartbeat-failed', count=self.heartbeat_miss)
+                    device.connect_status = ConnectStatus.UNREACHABLE
+                    device.oper_status = OperStatus.FAILED
+                    device.reason = self.heartbeat_last_reason
+                    self.adapter_agent.update_device(device)
+                    HeartbeatAlarm(self.alarms, 'olt', self.heartbeat_miss).raise_alarm()
+                    self.on_heatbeat_alarm(True)
+            else:
+                # Update device states
+                if device.connect_status != ConnectStatus.REACHABLE:
+                    device.connect_status = ConnectStatus.REACHABLE
+                    device.oper_status = OperStatus.ACTIVE
+                    device.reason = ''
+                    self.adapter_agent.update_device(device)
+                    HeartbeatAlarm(self.alarms, 'olt').clear_alarm()
+                    self.on_heatbeat_alarm(False)
+
+                if self.netconf_client is None or not self.netconf_client.connected:
+                    self.make_netconf_connection(close_existing_client=True)
+
+        except Exception as e:
+            self.log.exception('heartbeat-check', e=e)
+
+        # Reschedule next heartbeat
+        if self.logical_device_id is not None:
+            self.heartbeat_count += 1
+            self.heartbeat = reactor.callLater(self.heartbeat_interval, self.check_pulse)
+
+    def _heartbeat_success(self, results):
+        self.log.debug('heartbeat-success')
+        self.heartbeat_miss = 0
+        self.heartbeat_last_reason = ''
+        self.heartbeat_check_status(results)
+
+    def _heartbeat_fail(self, failure):
+        self.heartbeat_miss += 1
+        self.log.info('heartbeat-miss', failure=failure,
+                      count=self.heartbeat_count,
+                      miss=self.heartbeat_miss)
+        self.heartbeat_last_reason = 'RESTCONF connectivity error'
+        self.heartbeat_check_status(None)
+
+    @staticmethod
+    def parse_module_revision(revision):
+        try:
+            return datetime.datetime.strptime(revision, '%Y-%m-%d')
+        except Exception:
+            return None
+
+    def remove_from_flow_table(self, _flows):
+        """
+        Remove flows from the device
+        :param _flows: (list) Flows
+        """
+        raise NotImplementedError()
+
+    def add_to_flow_table(self, _flows):
+        """
+        Remove flows from the device
+        :param _flows: (list) Flows
+        """
+        raise NotImplementedError()
+
+    def process_inter_adapter_message(self, msg):
+        """
+        Called when the adapter receives a message that was sent to it directly
+        from another adapter. An adapter is automatically registered for these
+        messages when creating the inter-container kafka proxy. Note that it is
+        the responsibility of the sending and receiving adapters to properly encode
+        and decode the message.
+        :param msg: Proto Message (any)
+        :return: Proto Message Response
+        """
+        raise NotImplementedError()
+
+    def get_ofp_device_info(self, device):
+        """
+        Retrieve the OLT device info. This includes the ofp_desc and
+        ofp_switch_features. The existing ofp structures can be used,
+        or all the attributes get added to the Device definition or a new proto
+        definition gets created. This API will allow the Core to create a
+        LogicalDevice associated with this device (OLT only).
+        :param device: device
+        :return: Proto Message (TBD)
+        """
+        raise NotImplementedError()
+
+    def get_ofp_port_info(self, device, port_no):
+        """
+        Retrieve the port info. This includes the ofp_port. The existing ofp
+        structure can be used, or all the attributes get added to the Port
+        definitions or a new proto definition gets created.  This API will allow
+        the Core to create a LogicalPort associated with this device.
+        :param device: device
+        :param port_no: port number
+        :return: Proto Message (TBD)
+        """
+        raise NotImplementedError()
diff --git a/adapters/adtran_common/download.py b/adapters/adtran_common/download.py
new file mode 100644
index 0000000..8207a99
--- /dev/null
+++ b/adapters/adtran_common/download.py
@@ -0,0 +1,523 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+import xmltodict
+from twisted.internet import reactor
+from twisted.internet.defer import returnValue, inlineCallbacks
+from pyvoltha.protos.device_pb2 import ImageDownload
+from pyvoltha.protos.common_pb2 import AdminState
+
+log = structlog.get_logger()
+
+# TODO: Following two would be good provisionable parameters
+DEFAULT_AUTO_AGE_MINUTES = 10
+DEFAULT_MAX_JOB_RUN_SECONDS = 3600 * 4     # Some OLT files are 250MB+
+
+
+class Download(object):
+    """Class to wrap an image download"""
+
+    def __init__(self, handler, request, protocols):
+        self._handler = handler
+        self._deferred = None
+        self.device_id = request.id
+        self._name = request.name
+        self._url = request.url
+        self._crc = request.crc
+        self._version = request.image_version
+        self._local = request.local_dir
+        self._save_config = request.save_config
+        self._supported_protocols = protocols
+
+        self._download_state = ImageDownload.DOWNLOAD_UNKNOWN
+        self._failure_reason = ImageDownload.UNKNOWN_ERROR
+        self._image_state = ImageDownload.IMAGE_UNKNOWN
+        self._additional_info = ''
+        self._downloaded_octets = 0
+
+        # Server profile info
+        self._server_profile_name = None
+        self._scheme = None
+        self._host = ''
+        self._port = None
+        self._path = ''
+        self._auth = None
+
+        # Download job info
+        self._download_job_name = None
+
+        self._age_out_period = DEFAULT_AUTO_AGE_MINUTES
+        self._max_execution = DEFAULT_MAX_JOB_RUN_SECONDS
+
+    def __str__(self):
+        return "ImageDownload: {}".format(self.name)
+
+    @staticmethod
+    def create(handler, request, supported_protocols):
+        """
+        Create and start a new image download
+
+        :param handler: (AdtranDeviceHandler) Device download is for
+        :param request: (ImageDownload) Request
+        :param supported_protocols: (list) download methods allowed (http, tftp, ...)
+        """
+        download = Download(handler, request, supported_protocols)
+        download._deferred = reactor.callLater(0, download.start_download)
+
+        return download
+
+    @property
+    def name(self):
+        return self._name
+
+    @property
+    def download_state(self):
+        return self._download_state
+
+    @property
+    def failure_reason(self):
+        return self._failure_reason
+
+    @property
+    def image_state(self):
+        return self._image_state
+
+    @property
+    def additional_info(self):
+        return self._additional_info
+
+    @property
+    def downloaded_bytes(self):
+        return self._downloaded_octets
+
+    @property
+    def profile_name(self):
+        return self._server_profile_name
+
+    def _cancel_deferred(self):
+        d, self._deferred = self._deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except Exception as e:
+            pass
+
+    @inlineCallbacks
+    def start_download(self):
+        import uuid
+        log.info('download-start', name=self.name)
+        if not self.parse_url():
+            self._download_failed()
+            returnValue('failed url parsing')
+
+        self._download_state = ImageDownload.DOWNLOAD_STARTED
+        self._failure_reason = ImageDownload.NO_ERROR
+
+        ##############################################################
+        # Configure the file server profile
+        try:
+            self._additional_info = 'Configuring Download Server profile'
+            self._server_profile_name = 'VOLTHA.download.{}'.format(uuid.uuid4())
+            profile = self.server_profile_xml
+            yield self._handler.netconf_client.edit_config(profile)
+
+        except Exception as e:
+            log.exception('server-profile', e=e)
+            self._server_profile_name = None
+            self._failure_reason = ImageDownload.UNKNOWN_ERROR
+            self._additional_info += ': Failure: {}'.format(e.message)
+            self._download_failed()
+            raise
+
+        ##############################################################
+        # Configure the software download maintenance job
+        try:
+            self._additional_info = 'Configuring Image Download Job'
+            self._download_job_name = 'VOLTHA.download.{}'.format(uuid.uuid4())
+            job = self.download_job_xml
+            yield self._handler.netconf_client.edit_config(job)
+
+        except Exception as e:
+            log.exception('server-profile', e=e)
+            self._download_job_name = None
+            self._failure_reason = ImageDownload.UNKNOWN_ERROR
+            self._additional_info += ': Failure: {}'.format(e.message)
+            self._download_failed()
+            raise
+
+        ##############################################################
+        # Schedule a task to monitor the download
+        try:
+            self._additional_info = 'Monitoring download status'
+            self._deferred = reactor.callLater(0.5, self.monitor_download_status)
+
+        except Exception as e:
+            log.exception('server-profile', e=e)
+            self._failure_reason = ImageDownload.UNKNOWN_ERROR
+            self._additional_info += ': Failure: {}'.format(e.message)
+            self._download_failed()
+            raise
+
+        returnValue('started')
+
+    def parse_url(self):
+        from urllib3 import util, exceptions
+        try:
+            results = util.parse_url(self._url)
+
+            # Server info
+            self._scheme = results.scheme.lower()
+            if self._scheme not in self._supported_protocols:
+                self._failure_reason = ImageDownload.INVALID_URL
+                self._additional_info = "Unsupported file transfer protocol: {}".format(results.scheme)
+                return False
+
+            self._host = results.host
+            self._port = results.port
+            self._path = results.path
+            self._auth = results.auth
+            return True
+
+        except exceptions.LocationValueError as e:
+            self._failure_reason = ImageDownload.INVALID_URL
+            self._additional_info = e.message
+            return False
+
+        except Exception as e:
+            self._failure_reason = ImageDownload.UNKNOWN_ERROR
+            self._additional_info = e.message
+            return False
+
+    @property
+    def server_profile_xml(self):
+        assert self._scheme in ['http', 'https', 'ftp', 'sftp', 'tftp'], 'Invalid protocol'
+
+        xml = """
+              <file-servers xmlns="http://www.adtran.com/ns/yang/adtran-file-servers">
+                <profiles>
+                  <profile>"""
+
+        xml += '<name>{}</name>'.format(self._server_profile_name)
+        xml += '<connection-profile>'
+        xml += '  <host>{}</host>'.format(self._host)
+        xml += '  <port>{}</port>'.format(self._port) if self._port is not None else '<use-standard-port/>'
+
+        if self._scheme in ['http', 'https']:
+            xml += '  <protocol '
+            xml += 'xmlns:adtn-file-srv-https="http://www.adtran.com/ns/yang/adtran-file-servers-https">' +\
+                   'adtn-file-srv-https:{}'.format(self._scheme)
+            xml += '  </protocol>'
+
+        elif self._scheme == 'sftp':
+            xml += '  <protocol '
+            xml += 'xmlns:adtn-file-srv-sftp="http://www.adtran.com/ns/yang/adtran-file-servers-sftp">' +\
+                   'adtn-file-srv-sftp:sftp'
+            xml += '  </protocol>'
+
+        elif self._scheme in ['ftp', 'tftp']:
+            xml += '<protocol>adtn-file-srv:{}</protocol>'.format(self._scheme)
+
+        if self._auth is not None:
+            user_pass = self._auth.split(':')
+            xml += '<username>{}</username>'.format(user_pass[0])
+            xml += '<password>$0${}</password>'.format("".join(user_pass[1:]))
+        # And the trailer
+        xml += """
+                 </connection-profile>
+               </profile>
+             </profiles>
+            </file-servers>
+        """
+        return xml
+
+    @property
+    def download_job_xml(self):
+        # TODO: May want to support notifications
+        # TODO: Not sure about this name for the entity
+        entity = 'main 0'
+        xml = """
+              <maintenance-jobs xmlns="http://www.adtran.com/ns/yang/adtran-maintenance-jobs" xmlns:adtn-phys-sw-mnt="http://www.adtran.com/ns/yang/adtran-physical-software-maintenance">
+                <maintenance-job>
+                  <name>{}</name>
+                  <enabled>true</enabled>
+                  <notify-enabled>false</notify-enabled>
+                  <maximum-execution-time>{}</maximum-execution-time>
+                  <run-once>true</run-once>
+                  <adtn-phys-sw-mnt:download-software>
+                    <adtn-phys-sw-mnt:physical-entity>{}</adtn-phys-sw-mnt:physical-entity>
+                    <adtn-phys-sw-mnt:software-name>software</adtn-phys-sw-mnt:software-name>
+                    <adtn-phys-sw-mnt:remote-file>
+                      <adtn-phys-sw-mnt:file-server-profile>{}</adtn-phys-sw-mnt:file-server-profile>
+                      <adtn-phys-sw-mnt:filename>{}</adtn-phys-sw-mnt:filename>
+        """.format(self._download_job_name, self._max_execution, entity,
+                   self._server_profile_name, self._name)
+
+        if self._path is not None:
+            xml += """
+                          <adtn-phys-sw-mnt:filepath>{}</adtn-phys-sw-mnt:filepath>
+                """.format(self._path)
+
+        xml += """
+                    </adtn-phys-sw-mnt:remote-file>
+                  </adtn-phys-sw-mnt:download-software>
+                </maintenance-job>
+              </maintenance-jobs>
+        """
+        return xml
+
+    @property
+    def download_status_xml(self):
+        xml = """
+              <filter>
+                <maintenance-jobs-state xmlns="http://www.adtran.com/ns/yang/adtran-maintenance-jobs">
+                  <maintenance-job>
+                    <name>{}</name>
+                  </maintenance-job>
+                </maintenance-jobs-state>
+              </filter>
+          """.format(self._download_job_name)
+        return xml
+
+    @property
+    def delete_server_profile_xml(self):
+        xml = """
+        <file-servers xmlns="http://www.adtran.com/ns/yang/adtran-file-servers">
+          <profiles operation="delete">
+            <profile>
+              <name>{}</name>
+            </profile>
+           </profiles>
+        </file-servers>
+        """.format(self._server_profile_name)
+        return xml
+
+    @property
+    def delete_download_job_xml(self):
+        xml = """
+        <maintenance-jobs xmlns="http://www.adtran.com/ns/yang/adtran-maintenance-jobs">
+          <maintenance-job operation="delete">>
+            <name>{}</name>
+          </maintenance-job>
+        </maintenance-jobs>
+        """.format(self._download_job_name)
+        return xml
+
+    @inlineCallbacks
+    def monitor_download_status(self):
+        log.debug('monitor-download', name=self.name)
+        try:
+            results = yield self._handler.netconf_client.get(self.download_status_xml)
+
+            result_dict = xmltodict.parse(results.data_xml)
+            entries = result_dict['data']['maintenance-jobs-state']['maintenance-job']
+
+            name = entries.get('name')
+            assert name == self._download_job_name, 'The job status name does not match. {} != {}'.format(name, self.name)
+            self._download_state = self.monitor_state_to_download_state(entries['state']['#text'])
+
+            completed = entries['timestamps'].get('completed-timestamp')
+            started = entries['timestamps'].get('start-timestamp')
+
+            if self._download_state == ImageDownload.DOWNLOAD_FAILED:
+                self._failure_reason = ImageDownload.UNKNOWN_ERROR
+                self._additional_info = entries['error'].get('error-message')
+
+            elif self._download_state == ImageDownload.INSUFFICIENT_SPACE:
+                self._failure_reason = ImageDownload.INSUFFICIENT_SPACE
+                self._additional_info = entries['error'].get('error-message')
+
+            elif self._download_state == ImageDownload.DOWNLOAD_STARTED:
+                self._failure_reason = ImageDownload.NO_ERROR
+                self._additional_info = 'Download started at {}'.format(started)
+
+            elif self._download_state == ImageDownload.DOWNLOAD_SUCCEEDED:
+                self._failure_reason = ImageDownload.NO_ERROR
+                self._additional_info = 'Download completed at {}'.format(completed)
+            else:
+                raise NotImplemented('Unsupported state')
+
+            done = self._download_state in [ImageDownload.DOWNLOAD_FAILED,
+                                            ImageDownload.DOWNLOAD_SUCCEEDED,
+                                            ImageDownload.INSUFFICIENT_SPACE]
+
+        except Exception as e:
+            log.exception('protocols', e=e)
+            done = False
+
+        if not done:
+            self._deferred = reactor.callLater(1, self.monitor_download_status)
+
+        returnValue('done' if done else 'not-done-yet')
+
+    def _download_failed(self):
+        log.info('download-failed', name=self.name)
+
+        self._cancel_deferred()
+        self._download_state = ImageDownload.DOWNLOAD_FAILED
+
+        # Cleanup NETCONF
+        reactor.callLater(0, self._cleanup_download_job, 20)
+        reactor.callLater(0, self._cleanup_server_profile, 20)
+        # TODO: Do we signal any completion due to failure?
+
+    def _download_complete(self):
+        log.info('download-completed', name=self.name)
+
+        self._cancel_deferred()
+        self._download_state = ImageDownload.DOWNLOAD_SUCCEEDED
+        self._downloaded_octets = 123456
+        self._failure_reason = ImageDownload.NO_ERROR
+
+        reactor.callLater(0, self._cleanup_download_job, 20)
+        reactor.callLater(0, self._cleanup_server_profile, 20)
+        # TODO: How do we signal completion?
+
+        device = self._handler.adapter_agent.get_device(self.device_id)
+        if device is not None:
+            # restore admin state to enabled
+            device.admin_state = AdminState.ENABLED
+            self._handler.adapter_agent.update_device(device)
+
+    def cancel_download(self, request):
+        log.info('cancel-sw-download', name=self.name)
+
+        self._cancel_deferred()
+
+        try:
+            # initiate cancelling software download to device at success
+            # delete image download record
+
+            self._handler.adapter_agent.delete_image_download(request)
+
+            device = self._handler.adapter_agent.get_device(self.device_id)
+            if device is not None:
+                # restore admin state to enabled
+                device.admin_state = AdminState.ENABLED
+                self._handler.adapter_agent.update_device(device)
+
+        except Exception as e:
+            log.exception(e.message)
+
+        reactor.callLater(0, self._cleanup_download_job, 20)
+        reactor.callLater(0, self._cleanup_server_profile, 20)
+
+    @inlineCallbacks
+    def _cleanup_server_profile(self, retries, attempt=1):
+        log.info('cleanup-server', name=self.name,
+                 profile=self._server_profile_name,
+                 attempt=attempt, remaining=retries)
+
+        if self._server_profile_name is not None:
+            try:
+                profile = self.delete_server_profile_xml
+                yield self._handler.netconf_client.edit_config(profile)
+                self._server_profile_name = None
+
+            except Exception as e:
+                log.exception(e.message)
+                if retries > 0:
+                    reactor.callLater(attempt * 60, self._cleanup_download_job,
+                                      retries - 1, attempt + 1)
+
+    @inlineCallbacks
+    def _cleanup_download_job(self, retries, attempt=1):
+        log.info('cleanup-download', name=self.name,
+                 profile=self._download_job_name,
+                 attempt=attempt, remaining=retries)
+
+        if self._download_job_name is not None:
+            try:
+                job = self.delete_download_job_xml
+                yield self._handler.netconf_client.edit_config(job)
+                self._download_job_name = None
+
+            except Exception as e:
+                log.exception(e.message)
+                if retries > 0:
+                    reactor.callLater(attempt * 60, self._cleanup_download_job,
+                                      retries - 1, attempt + 1)
+
+    @inlineCallbacks
+    def activate_image(self):
+        log.info('download-activate', name=self.name)
+
+        if self._download_state == ImageDownload.DOWNLOAD_SUCCEEDED:
+            pass   # TODO: Implement
+            self._image_state = ImageDownload.IMAGE_ACTIVE
+
+        returnValue('TODO: Implement this')
+
+    @inlineCallbacks
+    def revert_image(self):
+        log.info('download-revert', name=self.name)
+
+        if self._download_state == ImageDownload.DOWNLOAD_SUCCEEDED:
+            pass   # TODO: Implement
+            self._image_state = ImageDownload.IMAGE_INACTIVE
+
+        returnValue('TODO: Implement this')
+
+    def monitor_state_to_download_state(self, state):
+        if ':' in state:
+            state = state.split(':')[-1]
+        result = {
+            'downloading-software': ImageDownload.DOWNLOAD_STARTED,       # currently downloading software
+            'storing-software': ImageDownload.DOWNLOAD_STARTED,           # successfully downloaded the required software and is storing it to memory
+            'software-stored': ImageDownload.DOWNLOAD_SUCCEEDED,          # successfully downloaded the required software and has stored it successfully to memory
+            'software-download-failed': ImageDownload.DOWNLOAD_FAILED,    # unsuccessfully attemptedto download the required software
+            'invalid-software': ImageDownload.DOWNLOAD_FAILED,            # successfully downloaded the required software but the software was determined to be invalid
+            'software-storage-failed': ImageDownload.INSUFFICIENT_SPACE,  # successfully downloaded the required software but was unable to successfully stored it to memory
+        }.get(state.lower(), None)
+        log.info('download-software-state', result=result, state=state, name=self.name)
+        assert result is not None, 'Invalid state'
+        return result
+
+    def monitor_state_to_activate_state(self, state):
+        if ':' in state:
+            state = state.split(':')[-1]
+        result = {
+            'enabling-software': ImageDownload.IMAGE_ACTIVATE,         # currently enabling the software
+            'software-enabled': ImageDownload.IMAGE_ACTIVE,            # successfully enabled the required software
+            'enable-software-failed': ImageDownload.IMAGE_INACTIVE,    # unsuccessfully attempted to enable the required software revision
+            'activating-software': ImageDownload.IMAGE_ACTIVATE,       # currently activating the software
+            'software-activated': ImageDownload.IMAGE_ACTIVE,          # successfully activated the required software. The job terminated successfully
+            'activate-software-failed': ImageDownload.IMAGE_INACTIVE,  # unsuccessfully attempted to activate the required software revision
+            'committing-software': ImageDownload.IMAGE_ACTIVATE,       # currently committing the software
+            'software-committed': ImageDownload.IMAGE_ACTIVATE,        # successfully committed the required software. The job terminated successfully
+            'commit-software-failed': ImageDownload.IMAGE_INACTIVE,    # unsuccessfully attempted to commit the required software revision
+        }.get(state.lower(), None)
+        log.info('download-activate-state', result=result, state=state, name=self.name)
+        assert result is not None, 'Invalid state'
+        return result
+
+    @staticmethod
+    def clear_all(client):
+        """
+        Remove all file server profiles and download jobs
+        :param client: (ncclient) NETCONF Client to use
+        """
+        from twisted.internet import defer
+        del_fs_xml = """
+            <file-servers xmlns="http://www.adtran.com/ns/yang/adtran-file-servers">
+              <profiles operation="delete"/>
+            </file-servers>
+            """
+        del_job_xml = """
+            <maintenance-jobs operation="delete" xmlns="http://www.adtran.com/ns/yang/adtran-maintenance-jobs"/>
+            """
+        dl = [client.edit_config(del_fs_xml, ignore_delete_error=True),
+              client.edit_config(del_job_xml, ignore_delete_error=True)]
+
+        return defer.gatherResults(dl, consumeErrors=True)
diff --git a/adapters/adtran_common/flow/__init__.py b/adapters/adtran_common/flow/__init__.py
new file mode 100644
index 0000000..b0fb0b2
--- /dev/null
+++ b/adapters/adtran_common/flow/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_common/flow/acl.py b/adapters/adtran_common/flow/acl.py
new file mode 100644
index 0000000..67f8c08
--- /dev/null
+++ b/adapters/adtran_common/flow/acl.py
@@ -0,0 +1,385 @@
+#
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+import xmltodict
+import re
+import structlog
+from twisted.internet.defer import inlineCallbacks, returnValue, succeed
+
+log = structlog.get_logger()
+
+_acl_list = {}      # Key -> device-id -> Name: List of encoded EVCs
+
+ACL_NAME_FORMAT = 'VOLTHA-ACL-{}-{}'  # format(flow_entry.flow_id, flow-entry-hash)
+ACL_NAME_REGEX_ALL = 'VOLTHA-ACL-*'
+ACE_NAME_FORMAT = 'VOLTHA-ACE-{}'  # format(flow_entry.flow_id)
+
+
+class ACL(object):
+    """
+    Class to wrap Trap-to-Controller functionality
+    """
+    def __init__(self, flow_entry):
+        self._installed = False
+        self._status_message = None
+        self._parent = flow_entry           # FlowEntry parent
+        self._flow = flow_entry.flow
+        self._handler = flow_entry.handler
+        self._name = ACL.flow_to_name(flow_entry)
+        self._rule_name = ACL.flow_to_ace_name(flow_entry)
+        self._eth_type = flow_entry.eth_type
+        self._ip_protocol = flow_entry.ip_protocol
+        self._ipv4_dst = flow_entry.ipv4_dst
+        self._src_port = flow_entry.udp_src
+        self._dst_port = flow_entry.udp_dst
+        self._exception = False
+        self._enabled = True
+        self._valid = self._decode()
+
+    def __str__(self):
+        return 'ACL: {}, Installed: {}, L2: {}, L3/4: {}'.\
+            format(self.name, self._installed, self.is_l2_exception,
+                   self.is_l3_l4_exception)
+
+    @property
+    def name(self):
+        return self._name
+
+    @property
+    def installed(self):
+        return self._installed
+
+    @property
+    def is_l2_exception(self):
+        from flow_entry import FlowEntry
+        return self._eth_type not in (None,
+                                      FlowEntry.EtherType.IPv4,
+                                      FlowEntry.EtherType.IPv6)
+
+    @property
+    def is_l3_l4_exception(self):
+        return not self.is_l2_exception and self._ip_protocol is not None
+
+    @staticmethod
+    def _xml_header(operation=None):
+        return '<access-lists xmlns="http://www.adtran.com/ns/yang/adtran-ietf-access-control-list"\
+                xmlns:adtn-ietf-ns-acl="http://www.adtran.com/ns/yang/adtran-ietf-ns-access-control-list"><acl{}>'.\
+            format('' if operation is None else ' xc:operation="{}"'.format(operation))
+
+    @staticmethod
+    def _xml_trailer():
+        return '</acl></access-lists>'
+
+    def _xml_action(self):
+        xml = '<actions>'
+        if self._exception:
+            xml += '<adtn-ietf-ns-acl:exception-to-cpu/>'
+        else:
+            xml += '<permit/>'
+        xml += '</actions>'
+        return xml
+
+    def _ace_l2(self):
+        xml = '<ace>'
+        xml += '<rule-name>{}</rule-name>'.format(self._rule_name)
+        xml += '<matches><l2-acl><ether-type>{:04x}</ether-type></l2-acl></matches>'.format(self._eth_type)
+        xml += self._xml_action()
+        xml += '</ace>'
+        return xml
+
+    def _ace_l2_l3_ipv4(self):
+        xml = '<ace>'
+        xml += '<rule-name>{}</rule-name>'.format(self._rule_name)
+        xml += '<matches><l2-l3-ipv4-acl>'
+        xml += '<ether-type>{:04X}</ether-type>'.format(self._eth_type)
+
+        if self._ip_protocol is not None:
+            xml += '<protocol>{}</protocol>'.format(self._ip_protocol)
+        if self._ipv4_dst is not None:
+            xml += '<destination-ipv4-network>{}/32</destination-ipv4-network>'.format(self._ipv4_dst)
+        if self._src_port is not None:
+            xml += '<source-port-range><lower-port>{}</lower-port><operation>eq</operation></source-port-range>'.\
+                format(self._src_port)
+        if self._dst_port is not None:
+            xml += '<destination-port-range><lower-port>' + \
+                   '{}</lower-port><operations>eq</operations></destination-port-range>'.format(self._dst_port)
+
+        xml += '</l2-l3-ipv4-acl></matches>'
+        xml += self._xml_action()
+        xml += '</ace>'
+        return xml
+
+    def _ace_any(self):
+        xml = '<ace>'
+        xml += '<rule-name>{}</rule-name>'.format(self._rule_name)
+        xml += '<matches><any-acl/></matches>'
+        xml += self._xml_action()
+        xml += '</ace>'
+        return xml
+
+    def _acl_eth(self):
+        xml = '<acl-type>eth-acl</acl-type>'
+        xml += '<acl-name>{}</acl-name>'.format(self._name)
+        return xml
+
+    def _acl_l4(self):
+        xml = '<acl-type>mixed-l2-l3-ipv4-acl</acl-type>'
+        xml += '<acl-name>{}</acl-name>'.format(self._name)
+        return xml
+
+    def _acl_any(self):
+        xml = '<acl-type>any-acl</acl-type>'
+        xml += '<acl-name>{}</acl-name>'.format(self._name)
+        return xml
+
+    def _install_xml(self):
+        xml = ACL._xml_header('create')
+        if self.is_l2_exception:
+            xml += self._acl_eth()
+            xml += '<aces>{}</aces>'.format(self._ace_l2())
+        elif self.is_l3_l4_exception:
+            xml += self._acl_l4()
+            xml += '<aces>{}</aces>'.format(self._ace_l2_l3_ipv4())
+        else:
+            xml += self._acl_any()
+            xml += '<aces>{}</aces>'.format(self._ace_any())
+
+        xml += ACL._xml_trailer()
+        return xml
+
+    def _remove_xml(self):
+        xml = ACL._xml_header('delete')
+        if self.is_l2_exception:
+            xml += self._acl_eth()
+        elif self.is_l3_l4_exception:
+            xml += self._acl_l4()
+        else:
+            xml += self._acl_any()
+        xml += ACL._xml_trailer()
+        return xml
+
+    def evc_map_ingress_xml(self):
+        """ Individual ACL specific XML for the EVC MAP """
+
+        xml = '<adtn-evc-map-acl:acl-type '
+        fmt = 'xmlns:adtn-ietf-acl="http://www.adtran.com/ns/yang/adtran-ietf-access-control-list">adtn-ietf-acl:{}'\
+              '</adtn-evc-map-acl:acl-type>'
+
+        if self.is_l2_exception:
+            xml += fmt.format('eth-acl')
+
+        elif self.is_l3_l4_exception:
+            xml += fmt.format('mixed-l2-l3-ipv4-acl')
+
+        else:
+            xml += fmt.format('any-acl')
+
+        xml += '<adtn-evc-map-acl:acl-name>{}</adtn-evc-map-acl:acl-name>'.format(self.name)
+        return xml
+
+    @staticmethod
+    def create(flow_entry):
+        acl = ACL(flow_entry)
+
+        # Already created and installed, return that one
+        acls_installed = _acl_list.get(flow_entry.handler.device_id)
+        if acls_installed is not None:
+            entry = acls_installed.get(acl._name)
+            if entry is not None:
+                return entry
+
+        return acl
+
+    @staticmethod
+    def flow_to_name(flow_entry):
+        return ACL_NAME_FORMAT.format(flow_entry.flow_id, ACL.acl_hash(flow_entry))
+
+    @staticmethod
+    def flow_to_ace_name(flow_entry):
+        return ACE_NAME_FORMAT.format(flow_entry.flow_id)
+
+    @staticmethod
+    def acl_hash(flow_entry):
+        from hashlib import md5
+        in_port = flow_entry.in_port or 0
+        eth_type = flow_entry.eth_type or 0
+        ip_protocol = flow_entry.ip_protocol or 0
+        ipv4_dst = flow_entry.ipv4_dst or 0
+        src_port = flow_entry.udp_src or 0
+        dst_port = flow_entry.udp_dst or 0
+        hex_string = md5('{},{},{},{},{},{}'.format(in_port, eth_type, ip_protocol,
+                                                    ipv4_dst, src_port, dst_port)).hexdigest()
+        return hex_string
+
+    @property
+    def valid(self):
+        return self._valid
+
+    @property
+    def installed(self):
+        return self._installed
+
+    @property
+    def status(self):
+        return self._status_message
+
+    @inlineCallbacks
+    def install(self):
+        log.debug('installing-acl', installed=self._installed)
+
+        if not self._installed and self._enabled:
+            if self._handler.device_id not in _acl_list:
+                _acl_list[self._handler.device_id] = {}
+
+            acls_installed = _acl_list[self._handler.device_id]
+            if self._name in acls_installed:
+                # Return OK
+                returnValue(self._enabled)
+
+            try:
+                acl_xml = self._install_xml()
+                log.debug('install-xml', xml=acl_xml, name=self._name)
+
+                results = yield self._handler.netconf_client.edit_config(acl_xml)
+                self._installed = results.ok
+                self._status_message = '' if results.ok else results.error
+
+                if self._installed:
+                    acls_installed[self._name] = self
+
+            except Exception as e:
+                log.exception('install-failure', name=self._name, e=e)
+                raise
+
+        returnValue(self._installed and self._enabled)
+
+    @inlineCallbacks
+    def remove(self):
+        log.debug('removing-acl', installed=self._installed)
+
+        if self._installed:
+            acl_xml = self._remove_xml()
+            log.info('remove-xml', xml=acl_xml, name=self._name)
+
+            results = yield self._handler.netconf_client.edit_config(acl_xml)
+            self._installed = not results.ok
+            self._status_message = '' if results.ok else results.error
+
+            if not self._installed:
+                acls_installed = _acl_list.get(self._handler.device_id)
+                if acls_installed is not None and self._name in acls_installed:
+                    del acls_installed[self._name]
+
+        returnValue(not self._installed)
+
+    def enable(self):
+        if not self._enabled:
+            self._enabled = False
+            raise NotImplemented("TODO: Implement this")
+
+    def disable(self):
+        if self._enabled:
+            self._enabled = True
+            raise NotImplemented("TODO: Implement this")
+
+    def _decode(self):
+        """
+        Examine the field settings and set ACL up for requested fields
+        """
+        # If EtherType is not None and not IP, this is an L2 exception
+        self._exception = self.is_l2_exception or self.is_l3_l4_exception
+        return True
+
+    # BULK operations
+
+    @staticmethod
+    def enable_all():
+        raise NotImplemented("TODO: Implement this")
+
+    @staticmethod
+    def disable_all():
+        raise NotImplemented("TODO: Implement this")
+
+    @staticmethod
+    def clear_all(device_id):
+        """
+        Clear all acls for this device id from the list
+        :param device_id: id of the device
+        """
+        if device_id in _acl_list:
+            del _acl_list[device_id]
+
+    @staticmethod
+    def remove_all(client, regex_=ACL_NAME_REGEX_ALL):
+        """
+        Remove all matching ACLs from hardware
+        :param client: (ncclient) NETCONF Client to use
+        :param regex_: (String) Regular expression for name matching
+        :return: (deferred)
+        """
+        # Do a 'get' on the evc config an you should get the names
+        get_xml = """
+        <filter>
+          <access-lists xmlns="http://www.adtran.com/ns/yang/adtran-ietf-access-control-list">
+            <acl><acl-type/><acl-name/></acl>
+          </access-lists>
+        </filter>
+        """
+        log.debug('query', xml=get_xml, regex=regex_)
+
+        def request_failed(results, operation):
+            log.error('{}-failed'.format(operation), results=results)
+
+        def delete_complete(results):
+            log.debug('delete-complete', results=results)
+
+        def do_delete(rpc_reply, regexpr):
+            log.debug('query-complete', rpc_reply=rpc_reply)
+
+            if rpc_reply.ok:
+                result_dict = xmltodict.parse(rpc_reply.data_xml)
+                entries = result_dict['data']['access-lists'] if 'access-lists' in result_dict['data'] else {}
+
+                if 'acl' in entries:
+                    p = re.compile(regexpr)
+
+                    pairs = []
+                    if isinstance(entries['acl'], list):
+                        pairs = {(entry['acl-type'], entry['acl-name']) for entry in entries['acl']
+                                 if 'acl-name' in entry and 'acl-type' in entry and p.match(entry['acl-name'])}
+                    else:
+                        if 'acl' in entries:
+                            entry = entries['acl']
+                            if 'acl-name' in entry and 'acl-type' in entry and p.match(entry['acl-name']):
+                                pairs = [(entry['acl-type'], entry['acl-name'])]
+
+                    if len(pairs) > 0:
+                        del_xml = '<access-lists xmlns="http://www.adtran.com/ns/yang/adtran-ietf-access-control-list">'
+                        for pair in pairs:
+                            del_xml += '<acl xc:operation = "delete">'
+                            del_xml += '<acl-type>{}</acl-type>'.format(pair[0])
+                            del_xml += '<acl-name>{}</acl-name>'.format(pair[1])
+                            del_xml += '</acl>'
+                        del_xml += '</access-lists>'
+                        log.debug('removing', xml=del_xml)
+
+                        return client.edit_config(del_xml)
+
+            return succeed('no entries')
+
+        d = client.get(get_xml)
+        d.addCallbacks(do_delete, request_failed, callbackArgs=[regex_], errbackArgs=['get'])
+        d.addCallbacks(delete_complete, request_failed, errbackArgs=['edit-config'])
+        return d
diff --git a/adapters/adtran_common/flow/evc.py b/adapters/adtran_common/flow/evc.py
new file mode 100644
index 0000000..5e00bca
--- /dev/null
+++ b/adapters/adtran_common/flow/evc.py
@@ -0,0 +1,479 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import xmltodict
+import re
+import structlog
+from enum import IntEnum
+from twisted.internet import reactor, defer
+from twisted.internet.defer import inlineCallbacks, returnValue, succeed
+
+log = structlog.get_logger()
+
+EVC_NAME_FORMAT = 'VOLTHA-{}'                       # format(flow.id)
+EVC_NAME_REGEX_ALL = EVC_NAME_FORMAT.format('*')
+DEFAULT_STPID = 0x8100
+
+
+class EVC(object):
+    """
+    Class to wrap EVC functionality
+    """
+    class SwitchingMethod(IntEnum):
+        SINGLE_TAGGED = 1
+        DOUBLE_TAGGED = 2
+        MAC_SWITCHED = 3
+        DOUBLE_TAGGED_MAC_SWITCHED = 4
+        DEFAULT = SINGLE_TAGGED
+
+        @staticmethod
+        def xml(value):
+            if value is None:
+                value = EVC.SwitchingMethod.DEFAULT
+            if value == EVC.SwitchingMethod.SINGLE_TAGGED:
+                return '<single-tag-switched/>'
+            elif value == EVC.SwitchingMethod.DOUBLE_TAGGED:
+                return '<double-tag-switched/>'
+            elif value == EVC.SwitchingMethod.MAC_SWITCHED:
+                return '<mac-switched/>'
+            elif value == EVC.SwitchingMethod.DOUBLE_TAGGED_MAC_SWITCHED:
+                return '<double-tag-mac-switched/>'
+            raise ValueError('Invalid SwitchingMethod enumeration')
+
+    class Men2UniManipulation(IntEnum):
+        SYMMETRIC = 1
+        POP_OUT_TAG_ONLY = 2
+        DEFAULT = SYMMETRIC
+
+        @staticmethod
+        def xml(value):
+            if value is None:
+                value = EVC.Men2UniManipulation.DEFAULT
+            fmt = '<men-to-uni-tag-manipulation>{}</men-to-uni-tag-manipulation>'
+            if value == EVC.Men2UniManipulation.SYMMETRIC:
+                return fmt.format('<symmetric/>')
+            elif value == EVC.Men2UniManipulation.POP_OUT_TAG_ONLY:
+                return fmt.format('<pop-outer-tag-only/>')
+            raise ValueError('Invalid Men2UniManipulation enumeration')
+
+    class ElineFlowType(IntEnum):
+        NNI_TO_UNI = 1
+        UNI_TO_NNI = 2
+        NNI_TO_NNI = 3
+        UNI_TO_UNI = 4
+        ACL_FILTER = 5
+        UNKNOWN = 6
+        UNSUPPORTED = 7    # Or Invalid
+
+    def __init__(self, flow_entry):
+        self._installed = False
+        self._status_message = None
+        self._flow = flow_entry
+        self._name = self._create_name()
+        self._deferred = None
+        self._evc_maps = {}               # Map Name -> evc-map
+
+        self._flow_type = EVC.ElineFlowType.UNKNOWN
+
+        # EVC related properties
+        self._enabled = True
+        self._men_ports = []
+        self._s_tag = None
+        self._stpid = None
+        self._switching_method = None
+        self.service_evc = False
+
+        self._ce_vlan_preservation = None
+        self._men_to_uni_tag_manipulation = None
+
+        try:
+            self._valid = self._decode()
+
+        except Exception as e:
+            log.exception('Failure during EVC decode', e=e)
+            self._valid = False
+
+    def __str__(self):
+        return "EVC-{}: MEN: {}, S-Tag: {}".format(self._name, self._men_ports, self._s_tag)
+
+    def _create_name(self):
+        #
+        # TODO: Take into account selection criteria and output to make the name
+        #
+        return EVC_NAME_FORMAT.format(self._flow.flow_id)
+
+    def _cancel_deferred(self):
+        d, self._deferred = self._deferred, None
+
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+
+        except Exception as e:
+            pass
+
+    @property
+    def name(self):
+        return self._name
+
+    @property
+    def valid(self):
+        return self._valid
+
+    @property
+    def installed(self):
+        return self._installed
+
+    @installed.setter
+    def installed(self, value):
+        assert not value, 'EVC Install can only be reset'
+        self._installed = False
+
+    @property
+    def status(self):
+        return self._status_message
+
+    @status.setter
+    def status(self, value):
+        self._status_message = value
+
+    @property
+    def s_tag(self):
+        return self._s_tag
+
+    @property
+    def stpid(self):
+        return self._stpid
+
+    @stpid.setter
+    def stpid(self, value):
+        assert self._stpid is None or self._stpid == value, 'STPID can only be set once'
+        self._stpid = value
+
+    @property
+    def switching_method(self):
+        return self._switching_method
+
+    @switching_method.setter
+    def switching_method(self, value):
+        assert self._switching_method is None or self._switching_method == value,\
+            'Switching Method can only be set once. EVC: {}'.format(self.name)
+        self._switching_method = value
+
+    @property
+    def ce_vlan_preservation(self):
+        return self._ce_vlan_preservation
+
+    @ce_vlan_preservation.setter
+    def ce_vlan_preservation(self, value):
+        assert self._ce_vlan_preservation is None or self._ce_vlan_preservation == value,\
+            'CE VLAN Preservation can only be set once'
+        self._ce_vlan_preservation = value
+
+    @property
+    def men_to_uni_tag_manipulation(self):
+        return self._men_to_uni_tag_manipulation
+
+    @men_to_uni_tag_manipulation.setter
+    def men_to_uni_tag_manipulation(self, value):
+        assert self._men_to_uni_tag_manipulation is None or self._men_to_uni_tag_manipulation == value, \
+            'MEN-to-UNI tag manipulation can only be set once'
+        self._men_to_uni_tag_manipulation = value
+
+    @property
+    def flow_entry(self):
+        # Note that the first flow used to create the EVC is saved and it may
+        # eventually get deleted while others still use the EVC.  This should
+        # be okay as the downstream flow/signature table is used to maintain
+        # the lifetime on this EVC object.
+        return self._flow
+
+    @flow_entry.setter
+    def flow_entry(self, value):
+        self._flow = value
+
+    @property
+    def evc_maps(self):
+        """
+        Get all EVC Maps that reference this EVC
+        :return: list of EVCMap
+        """
+        return list(self._evc_maps.values()) if self._evc_maps is not None else []
+
+    @property
+    def evc_map_names(self):
+        """
+        Get all EVC Map names that reference this EVC
+        :return: list of EVCMap names
+        """
+        return list(self._evc_maps.keys()) if self._evc_maps is not None else []
+
+    def add_evc_map(self, evc_map):
+        if self._evc_maps is None:
+            self._evc_maps = dict()
+
+        if evc_map.name not in self._evc_maps:
+            self._evc_maps[evc_map.name] = evc_map
+
+    def remove_evc_map(self, evc_map):
+        if self._evc_maps is not None and evc_map.name in self._evc_maps:
+            del self._evc_maps[evc_map.name]
+
+    def schedule_install(self, delay=0):
+        """
+        Try to install EVC and all MAPs in a single operational sequence.
+        The delay parameter is used during recovery to allow multiple associated
+        EVC maps to be updated/modified independently before the parent EVC
+        is installed.
+
+        :param delay: (int) Seconds to delay before install
+        """
+        self._cancel_deferred()
+
+        self._deferred = reactor.callLater(delay, self._do_install) \
+            if self._valid else succeed('Not VALID')
+
+        return self._deferred
+
+    @staticmethod
+    def _xml_header(operation=None):
+        return '<evcs xmlns="http://www.adtran.com/ns/yang/adtran-evcs"{}><evc>'.\
+            format('' if operation is None else ' xc:operation="{}"'.format(operation))
+
+    @staticmethod
+    def _xml_trailer():
+        return '</evc></evcs>'
+
+    @inlineCallbacks
+    def _do_install(self):
+        # Install the EVC if needed
+        log.debug('do-install', valid=self._valid, installed=self._installed)
+
+        if self._valid and not self._installed:
+            # TODO: Currently install EVC and then MAPs. Can do it all in a single edit-config operation
+
+            xml = EVC._xml_header()
+            xml += '<name>{}</name>'.format(self.name)
+            xml += '<enabled>{}</enabled>'.format('true' if self._enabled else 'false')
+
+            if self._ce_vlan_preservation is not None:
+                xml += '<ce-vlan-preservation>{}</ce-vlan-preservation>'.format('false')
+
+            if self._s_tag is not None:
+                xml += '<stag>{}</stag>'.format(self._s_tag)
+                xml += '<stag-tpid>{}</stag-tpid>'.format(self._stpid or DEFAULT_STPID)
+            else:
+                xml += 'no-stag/'
+
+            for port in self._men_ports:
+                xml += '<men-ports>{}</men-ports>'.format(port)
+
+            # xml += EVC.Men2UniManipulation.xml(self._men_to_uni_tag_manipulation)
+            # xml += EVC.SwitchingMethod.xml(self._switching_method)
+            xml += EVC._xml_trailer()
+
+            log.debug('create-evc', name=self.name, xml=xml)
+            try:
+                # Set installed to true while request is in progress
+                self._installed = True
+                results = yield self._flow.handler.netconf_client.edit_config(xml)
+                self._installed = results.ok
+                self.status = '' if results.ok else results.error
+
+            except Exception as e:
+                log.exception('install-failed', name=self.name, e=e)
+                raise
+
+        # Install any associated EVC Maps
+
+        if self._installed:
+            for evc_map in self.evc_maps:
+                try:
+                    yield evc_map.install()
+
+                except Exception as e:
+                    evc_map.status = 'Exception during EVC-MAP Install: {}'.format(e.message)
+                    log.exception('evc-map-install-failed', e=e)
+
+        returnValue(self._installed and self._valid)
+
+    def remove(self, remove_maps=True):
+        """
+        Remove EVC (and optional associated EVC-MAPs) from hardware
+        :param remove_maps: (boolean)
+        :return: (deferred)
+        """
+        if not self.installed:
+            return succeed('Not installed')
+
+        log.info('removing', evc=self, remove_maps=remove_maps)
+        dl = []
+
+        def _success(rpc_reply):
+            log.debug('remove-success', rpc_reply=rpc_reply)
+            self._installed = False
+
+        def _failure(results):
+            log.error('remove-failed', results=results)
+            self._installed = False
+
+        xml = EVC._xml_header('delete') + '<name>{}</name>'.format(self.name) + EVC._xml_trailer()
+        d = self._flow.handler.netconf_client.edit_config(xml)
+        d.addCallbacks(_success, _failure)
+        dl.append(d)
+
+        if remove_maps:
+            for evc_map in self.evc_maps:
+                dl.append(evc_map.remove())
+
+        return defer.gatherResults(dl, consumeErrors=True)
+
+    @inlineCallbacks
+    def delete(self, delete_maps=True):
+        """
+        Remove from hardware and delete/clean-up EVC Object
+        """
+        log.info('deleting', evc=self, delete_maps=delete_maps)
+
+        assert self._flow, 'Delete EVC must have flow reference'
+        try:
+            dl = [self.remove()]
+            self._valid = False
+
+            if delete_maps:
+                for evc_map in self.evc_maps:
+                    dl.append(evc_map.delete(None))   # TODO: implement bulk-flow procedures
+
+            yield defer.gatherResults(dl, consumeErrors=True)
+
+        except Exception as e:
+            log.exception('removal', e=e)
+
+        self._evc_maps = None
+        f, self._flow = self._flow, None
+        if f is not None and f.handler is not None:
+            f.handler.remove_evc(self)
+
+        returnValue('Done')
+
+    def reflow(self, reflow_maps=True):
+        """
+        Attempt to install/re-install a flow
+        :param reflow_maps: (boolean) Flag indication if EVC-MAPs should be reflowed as well
+        :return: (deferred)
+        """
+        self._installed = False
+
+        if reflow_maps:
+            for evc_map in self.evc_maps:
+                evc_map.installed = False
+
+        return self.schedule_install()
+
+    def _decode(self):
+        """
+        Examine flow rules and extract appropriate settings for this EVC
+        """
+        if self._flow.handler.is_nni_port(self._flow.in_port):
+            self._men_ports.append(self._flow.handler.get_port_name(self._flow.in_port))
+        else:
+            self._status_message = 'EVCs with UNI ports are not supported'
+            return False    # UNI Ports handled in the EVC Maps
+
+        self._s_tag = self._flow.vlan_id
+
+        if self._flow.inner_vid is not None:
+           self._switching_method = EVC.SwitchingMethod.DOUBLE_TAGGED
+
+        # For the Utility VLAN, multiple ingress ACLs (different GEMs) will need to
+        # be trapped on this EVC. Since these are usually untagged, we have to force
+        # the EVC to preserve CE VLAN tags.
+
+        if self._s_tag == self._flow.handler.utility_vlan:
+            self._ce_vlan_preservation = True
+
+        # Note: The following fields may get set when the first EVC-MAP
+        #       is associated with this object. Once set, they cannot be changed to
+        #       another value.
+        #  self._stpid
+        #  self._switching_method
+        #  self._ce_vlan_preservation
+        #  self._men_to_uni_tag_manipulation
+        return True
+
+    # BULK operations
+
+    @staticmethod
+    def remove_all(client, regex_=EVC_NAME_REGEX_ALL):
+        """
+        Remove all matching EVCs from hardware
+        :param client: (ncclient) NETCONF Client to use
+        :param regex_: (String) Regular expression for name matching
+        :return: (deferred)
+        """
+        # Do a 'get' on the evc config an you should get the names
+        get_xml = """
+        <filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
+          <evcs xmlns="http://www.adtran.com/ns/yang/adtran-evcs">
+            <evc><name/></evc>
+          </evcs>
+        </filter>
+        """
+        log.debug('query', xml=get_xml, regex=regex_)
+
+        def request_failed(results, operation):
+            log.error('{}-failed'.format(operation), results=results)
+            # No further actions. Periodic poll later on will scrub any old EVCs if needed
+
+        def delete_complete(results):
+            log.debug('delete-complete', results=results)
+
+        def do_delete(rpc_reply, regexpr):
+            log.debug('query-complete', rpc_reply=rpc_reply)
+
+            if rpc_reply.ok:
+                result_dict = xmltodict.parse(rpc_reply.data_xml)
+                entries = result_dict['data']['evcs'] if 'evcs' in result_dict['data'] else {}
+
+                if 'evc' in entries:
+                    p = re.compile(regexpr)
+
+                    if isinstance(entries['evc'], list):
+                        names = {entry['name'] for entry in entries['evc'] if 'name' in entry
+                                 and p.match(entry['name'])}
+                    else:
+                        names = set()
+                        for item in entries['evc'].items():
+                            if isinstance(item, tuple) and item[0] == 'name':
+                                names.add(item[1])
+                                break
+
+                    if len(names) > 0:
+                        del_xml = '<evcs xmlns="http://www.adtran.com/ns/yang/adtran-evcs"' + \
+                                 ' xc:operation = "delete">'
+                        for name in names:
+                            del_xml += '<evc>'
+                            del_xml += '<name>{}</name>'.format(name)
+                            del_xml += '</evc>'
+                        del_xml += '</evcs>'
+                        log.debug('removing', xml=del_xml)
+
+                        return client.edit_config(del_xml)
+
+            return succeed('no entries')
+
+        d = client.get(get_xml)
+        d.addCallbacks(do_delete, request_failed, callbackArgs=[regex_], errbackArgs=['get'])
+        d.addCallbacks(delete_complete, request_failed, errbackArgs=['edit-config'])
+        return d
diff --git a/adapters/adtran_common/flow/evc_map.py b/adapters/adtran_common/flow/evc_map.py
new file mode 100644
index 0000000..688124a
--- /dev/null
+++ b/adapters/adtran_common/flow/evc_map.py
@@ -0,0 +1,1015 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import xmltodict
+import re
+import structlog
+from enum import Enum
+from acl import ACL
+from twisted.internet import defer, reactor
+from twisted.internet.defer import inlineCallbacks, returnValue, succeed
+from ncclient.operations.rpc import RPCError
+
+
+log = structlog.get_logger()
+
+# NOTE: For the EVC Map name, the ingress-port number is the VOLTHA port number (not pon-id since
+#       it covers NNI ports as well in order to handle the NNI-NNI case.  For flows that
+#       cover an entire pon, the name will have the ONU ID and GEM ID appended to it upon
+#       installation with a period as a separator.
+
+EVC_MAP_NAME_FORMAT = 'VOLTHA-{}-{}'   # format(logical-ingress-port-number, flow-id)
+EVC_MAP_NAME_REGEX_ALL = 'VOLTHA-*'
+
+
+class EVCMap(object):
+    """
+    Class to wrap EVC functionality
+    """
+    class EvcConnection(Enum):
+        NO_EVC_CONNECTION = 0
+        EVC = 1
+        DISCARD = 2
+        DEFAULT = NO_EVC_CONNECTION
+
+        @staticmethod
+        def xml(value):
+            # Note we do not have XML for 'EVC' enumeration.
+            if value is None:
+                value = EVCMap.EvcConnection.DEFAULT
+            if value == EVCMap.EvcConnection.DISCARD:
+                return '<no-evc-connection/>'
+            elif value == EVCMap.EvcConnection.DISCARD:
+                return 'discard/'
+            raise ValueError('Invalid EvcConnection enumeration')
+
+    class PriorityOption(Enum):
+        INHERIT_PRIORITY = 0
+        EXPLICIT_PRIORITY = 1
+        DEFAULT = INHERIT_PRIORITY
+
+        @staticmethod
+        def xml(value):
+            if value is None:
+                value = EVCMap.PriorityOption.DEFAULT
+            if value == EVCMap.PriorityOption.INHERIT_PRIORITY:
+                return '<inherit-pri/>'
+            elif value == EVCMap.PriorityOption.EXPLICIT_PRIORITY:
+                return '<explicit-pri/>'
+            raise ValueError('Invalid PriorityOption enumeration')
+
+    def __init__(self, flow, evc, is_ingress_map):
+        self._handler = flow.handler      # Same for all Flows attached to this EVC MAP
+        self._flows = {flow.flow_id: flow}
+        self._evc = None
+        self._new_acls = dict()           # ACL Name -> ACL Object (To be installed into h/w)
+        self._existing_acls = dict()      # ACL Name -> ACL Object (Already in H/w)
+        self._is_ingress_map = is_ingress_map
+        self._pon_id = None
+        self._onu_id = None               # Remains None if associated with a multicast flow
+        self._installed = False
+        self._needs_update = False
+        self._status_message = None
+        self._deferred = None
+        self._name = None
+        self._enabled = True
+        self._uni_port = None
+        self._evc_connection = EVCMap.EvcConnection.DEFAULT
+        self._men_priority = EVCMap.PriorityOption.DEFAULT
+        self._men_pri = 0  # If Explicit Priority
+
+        self._c_tag = None
+        self._men_ctag_priority = EVCMap.PriorityOption.DEFAULT
+        self._men_ctag_pri = 0  # If Explicit Priority
+        self._match_ce_vlan_id = None
+        self._match_untagged = False
+        self._match_destination_mac_address = None
+        self._match_l2cp = False
+        self._match_broadcast = False
+        self._match_multicast = False
+        self._match_unicast = False
+        self._match_igmp = False
+
+        from common.tech_profile.tech_profile import DEFAULT_TECH_PROFILE_TABLE_ID
+        self._tech_profile_id = DEFAULT_TECH_PROFILE_TABLE_ID
+        self._gem_ids_and_vid = None      # { key -> onu-id, value -> tuple(sorted GEM Port IDs, onu_vid) }
+        self._upstream_bandwidth = None
+        self._shaper_name = None
+
+        # ACL logic
+        self._eth_type = None
+        self._ip_protocol = None
+        self._ipv4_dst = None
+        self._udp_dst = None
+        self._udp_src = None
+
+        try:
+            self._valid = self._decode(evc)
+
+        except Exception as e:
+            log.exception('decode', e=e)
+            self._valid = False
+
+    def __str__(self):
+        return "EVCMap-{}: UNI: {}, hasACL: {}".format(self._name, self._uni_port,
+                                                       self._needs_acl_support)
+
+    @staticmethod
+    def create_ingress_map(flow, evc, dry_run=False):
+        evc_map = EVCMap(flow, evc, True)
+
+        if evc_map._valid and not dry_run:
+            evc.add_evc_map(evc_map)
+            evc_map._evc = evc
+
+        return evc_map
+
+    @staticmethod
+    def create_egress_map(flow, evc, dry_run=False):
+        evc_map = EVCMap(flow, evc, False)
+
+        if evc_map._valid and not dry_run:
+            evc.add_evc_map(evc_map)
+            evc_map._evc = evc
+
+        return evc_map
+
+    @property
+    def valid(self):
+        return self._valid
+
+    @property
+    def installed(self):
+        return self._installed
+
+    @property
+    def needs_update(self):
+        """ True if an parameter/ACL/... needs update or map needs to be reflowed after a failure"""
+        return self._needs_update
+
+    @needs_update.setter
+    def needs_update(self, value):
+        assert not value, 'needs update can only be reset'                # Can only reset
+        self._needs_update = False
+
+    @property
+    def name(self):
+        return self._name
+
+    @property
+    def status(self):
+        return self._status_message
+
+    @status.setter
+    def status(self, value):
+        self._status_message = value
+
+    @property
+    def evc(self):
+        return self._evc
+
+    @property
+    def _needs_acl_support(self):
+        if self._ipv4_dst is not None:  # In case MCAST downstream has ACL on it
+            return False
+
+        return self._eth_type is not None or self._ip_protocol is not None or\
+            self._udp_dst is not None or self._udp_src is not None
+
+    @property
+    def pon_id(self):
+        return self._pon_id     # May be None
+
+    @property
+    def onu_id(self):
+        return self._onu_id     # May be None if associated with a multicast flow
+
+    # @property
+    # def onu_ids(self):
+    #     return self._gem_ids_and_vid.keys()
+
+    @property
+    def gem_ids_and_vid(self):
+        return self._gem_ids_and_vid.copy()
+
+    @staticmethod
+    def _xml_header(operation=None):
+        return '<evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps"{}><evc-map>'.\
+            format('' if operation is None else ' xc:operation="{}"'.format(operation))
+
+    @staticmethod
+    def _xml_trailer():
+        return '</evc-map></evc-maps>'
+
+    def get_evcmap_name(self, onu_id, gem_id):
+        return'{}.{}.{}.{}'.format(self.name, self.pon_id, onu_id, gem_id)
+
+    def _common_install_xml(self):
+        xml = '<enabled>{}</enabled>'.format('true' if self._enabled else 'false')
+        xml += '<uni>{}</uni>'.format(self._uni_port)
+
+        evc_name = self._evc.name if self._evc is not None else None
+        if evc_name is not None:
+            xml += '<evc>{}</evc>'.format(evc_name)
+        else:
+            xml += EVCMap.EvcConnection.xml(self._evc_connection)
+
+        xml += '<match-untagged>{}</match-untagged>'.format('true'
+                                                            if self._match_untagged
+                                                            else 'false')
+
+        # TODO: The following is not yet supported (and in some cases, not decoded)
+        # self._men_priority = EVCMap.PriorityOption.INHERIT_PRIORITY
+        # self._men_pri = 0  # If Explicit Priority
+        #
+        # self._men_ctag_priority = EVCMap.PriorityOption.INHERIT_PRIORITY
+        # self._men_ctag_pri = 0  # If Explicit Priority
+        #
+        # self._match_ce_vlan_id = None
+        # self._match_untagged = True
+        # self._match_destination_mac_address = None
+        return xml
+
+    def _ingress_install_xml(self, onu_s_gem_ids_and_vid, acl_list, create):
+        from ..onu import Onu
+
+        if len(acl_list):
+            xml = '<evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps"' +\
+                   '         xmlns:adtn-evc-map-acl="http://www.adtran.com/ns/yang/adtran-evc-map-access-control-list">'
+        else:
+            xml = '<evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps">'
+
+        for onu_or_vlan_id, gem_ids_and_vid in onu_s_gem_ids_and_vid.iteritems():
+            first_gem_id = True
+            gem_ids = gem_ids_and_vid[0]
+            vid = gem_ids_and_vid[1]
+            ident = '{}.{}'.format(self._pon_id, onu_or_vlan_id) if vid is None \
+                else onu_or_vlan_id
+
+            for gem_id in gem_ids:
+                xml += '<evc-map{}>'.format('' if not create else ' xc:operation="create"')
+                xml += '<name>{}.{}.{}</name>'.format(self.name, ident, gem_id)
+                xml += '<ce-vlan-id>{}</ce-vlan-id>'.format(Onu.gem_id_to_gvid(gem_id))
+
+                # GEM-IDs are a sorted list (ascending). First gemport handles downstream traffic
+                if first_gem_id and (self._c_tag is not None or vid is not None):
+                    first_gem_id = False
+                    vlan = vid or self._c_tag
+                    xml += '<network-ingress-filter>'
+                    xml += '<men-ctag>{}</men-ctag>'.format(vlan)  # Added in August 2017 model
+                    xml += '</network-ingress-filter>'
+
+                if len(acl_list):
+                    xml += '<adtn-evc-map-acl:access-lists>'
+                    for acl in acl_list:
+                        xml += ' <adtn-evc-map-acl:ingress-acl>'
+                        xml += acl.evc_map_ingress_xml()
+                        xml += ' </adtn-evc-map-acl:ingress-acl>'
+                    xml += '</adtn-evc-map-acl:access-lists>'
+                xml += self._common_install_xml()
+                xml += '</evc-map>'
+        xml += '</evc-maps>'
+        return xml
+
+    def _egress_install_xml(self):
+        xml = EVCMap._xml_header()
+        xml += '<name>{}</name>'.format(self.name)
+        xml += self._common_install_xml()
+        xml += EVCMap._xml_trailer()
+        return xml
+
+    def _ingress_remove_acl_xml(self, onu_s_gem_ids_and_vid, acl):
+        xml = '<evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps"' +\
+               ' xmlns:adtn-evc-map-acl="http://www.adtran.com/ns/yang/adtran-evc-map-access-control-list">'
+        for onu_or_vlan_id, gem_ids_and_vid in onu_s_gem_ids_and_vid.iteritems():
+            first_gem_id = True
+            vid = gem_ids_and_vid[1]
+            ident = '{}.{}'.format(self._pon_id, onu_or_vlan_id) if vid is None \
+                else onu_or_vlan_id
+
+            for gem_id in gem_ids_and_vid[0]:
+                xml += '<evc-map>'
+                xml += '<name>{}.{}.{}</name>'.format(self.name, ident, gem_id)
+                xml += '<adtn-evc-map-acl:access-lists>'
+                xml += ' <adtn-evc-map-acl:ingress-acl xc:operation="delete">'
+                xml += acl.evc_map_ingress_xml()
+                xml += ' </adtn-evc-map-acl:ingress-acl>'
+                xml += '</adtn-evc-map-acl:access-lists>'
+                xml += '</evc-map>'
+        xml += '</evc-maps>'
+        return xml
+
+    @inlineCallbacks
+    def install(self):
+        def gem_ports():
+            ports = []
+            for gems_and_vids in self._gem_ids_and_vid.itervalues():
+                ports.extend(gems_and_vids[0])
+            return ports
+
+        log.debug('install-evc-map', valid=self._valid, gem_ports=gem_ports())
+
+        if self._valid and len(gem_ports()) > 0:
+            # Install ACLs first (if not yet installed)
+            work_acls = self._new_acls.copy()
+            self._new_acls = dict()
+
+            log.debug('install-evc-map-acls', install_acls=len(work_acls))
+            for acl in work_acls.itervalues():
+                try:
+                    yield acl.install()
+
+                except Exception as e:
+                    log.exception('acl-install-failed', name=self.name, e=e)
+                    self._new_acls.update(work_acls)
+                    raise
+
+            # Any user-data flows attached to this map ?
+            c_tag = None
+            for flow_id, flow in self._flows.items():
+                c_tag = flow.inner_vid or flow.vlan_id or c_tag
+
+            self._c_tag = c_tag
+
+            # Now EVC-MAP
+            if not self._installed or self._needs_update:
+                log.debug('needs-install-or-update', installed=self._installed, update=self._needs_update)
+                is_installed = self._installed
+                self._installed = True
+                try:
+                    self._cancel_deferred()
+
+                    log.info('upstream-bandwidth')
+                    try:
+                        yield self.update_upstream_flow_bandwidth()
+
+                    except Exception as e:
+                        log.exception('upstream-bandwidth-failed', name=self.name, e=e)
+                        raise
+
+                    map_xml = self._ingress_install_xml(self._gem_ids_and_vid, work_acls.values(),
+                                                        not is_installed) \
+                        if self._is_ingress_map else self._egress_install_xml()
+
+                    log.debug('install', xml=map_xml, name=self.name)
+                    results = yield self._handler.netconf_client.edit_config(map_xml)
+                    self._installed = results.ok
+                    self._needs_update = results.ok
+                    self._status_message = '' if results.ok else results.error
+
+                    if results.ok:
+                        self._existing_acls.update(work_acls)
+                    else:
+                        self._new_acls.update(work_acls)
+
+                except RPCError as rpc_err:
+                    if rpc_err.tag == 'data-exists':    # Known race due to bulk-flow operation
+                        pass
+
+                except Exception as e:
+                    log.exception('evc-map-install-failed', name=self.name, e=e)
+                    self._installed = is_installed
+                    self._new_acls.update(work_acls)
+                    raise
+
+                # Install any needed shapers
+                if self._installed:
+                    try:
+                        yield self.update_downstream_flow_bandwidth()
+
+                    except Exception as e:
+                        log.exception('shaper-install-failed', name=self.name, e=e)
+                        raise
+
+        returnValue(self._installed and self._valid)
+
+    def _ingress_remove_xml(self, onus_gem_ids_and_vid):
+        xml = '<evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps"' + \
+              ' xc:operation="delete">'
+
+        for onu_id, gem_ids_and_vid in onus_gem_ids_and_vid.iteritems():
+            for gem_id in gem_ids_and_vid[0]:
+                xml += '<evc-map>'
+                xml += '<name>{}.{}.{}</name>'.format(self.name, onu_id, gem_id)
+                xml += '</evc-map>'
+        xml += '</evc-maps>'
+        return xml
+
+    def _egress_remove_xml(self):
+        return EVCMap._xml_header('delete') + \
+               '<name>{}</name>'.format(self.name) + EVCMap._xml_trailer()
+
+    def _remove(self):
+        if not self.installed:
+            returnValue('Not installed')
+
+        log.info('removing', evc_map=self)
+
+        def _success(rpc_reply):
+            log.debug('remove-success', rpc_reply=rpc_reply)
+            self._installed = False
+
+        def _failure(failure):
+            log.error('remove-failed', failure=failure)
+            self._installed = False
+
+        def _remove_acls(_):
+            acls, self._new_acls = self._new_acls, dict()
+            existing, self._existing_acls = self._existing_acls, dict()
+            acls.update(existing)
+
+            dl = []
+            for acl in acls.itervalues():
+                dl.append(acl.remove())
+
+            if len(dl) > 0:
+                defer.gatherResults(dl, consumeErrors=True)
+
+        def _remove_shaper(_):
+            if self._shaper_name is not None:
+                self.update_downstream_flow_bandwidth(remove=True)
+
+        map_xml = self._ingress_remove_xml(self._gem_ids_and_vid) if self._is_ingress_map \
+            else self._egress_remove_xml()
+
+        d = self._handler.netconf_client.edit_config(map_xml)
+        d.addCallbacks(_success, _failure)
+        d.addBoth(_remove_acls)
+        d.addBoth(_remove_shaper)
+        return d
+
+    @inlineCallbacks
+    def delete(self, flow):
+        """
+        Remove from hardware and delete/clean-up EVC-MAP Object
+
+        :param flow: (FlowEntry) Specific flow to remove from the MAP or None if all
+                                 flows should be removed
+        :return:
+        """
+        flows = [flow] if flow is not None else list(self._flows.values())
+        removing_all = len(flows) == len(self._flows)
+
+        log.debug('delete', removing_all=removing_all)
+        if not removing_all:
+            for f in flows:
+                self._remove_flow(f)
+
+        else:
+            if self._evc is not None:
+                self._evc.remove_evc_map(self)
+                self._evc = None
+
+            self._valid = False
+            self._cancel_deferred()
+            try:
+                yield self._remove()
+
+            except Exception as e:
+                log.exception('removal', e=e)
+
+        returnValue('Done')
+
+    def reflow_needed(self):
+        log.debug('reflow-needed', installed=self.installed, needs_update=self.needs_update)
+        reflow = not self.installed or self.needs_update
+
+        if not reflow:
+            pass  # TODO: implement retrieve & compare of EVC Map parameters
+
+        return reflow
+
+    @staticmethod
+    def find_matching_ingress_flow(flow, upstream_flow_table):
+        """
+        Look for an existing EVC-MAP that may match this flow.  Called when upstream signature
+        for a flow does not make match. This can happen if an ACL flow is added and only an User
+        Data flow exists, or if only an ACL flow exists.
+
+        :param flow: (FlowEntry) flow to add
+        :param upstream_flow_table: (dict of FlowEntry) Existing upstream flows for this device,
+                                     including the flow we are looking to add
+        :return: (EVCMap) if appropriate one is found, else None
+        """
+        # A User Data flow will have:
+        #      signature: <dev>.1.5.2.242
+        #       down-sig: <dev>.1.*.2.*
+        #   logical-port: 66
+        #    is-acl-flow: False
+        #
+        # An ACL flow will have:
+        #      signature: <dev>.1.5.[4092 or 4094].None    (untagged VLAN == utility VLAN case)
+        #       down-sig: <dev>.1.*.[4092 or 4094].*
+        #   logical-port: 66
+        #    is-acl-flow: True
+        #
+        # Reduce the upstream flow table to only those that match the ingress,
+        # and logical-ports match (and is not this flow) and have a map
+
+        log.debug('find-matching-ingress-flow', logical_port=flow.logical_port, flow=flow.output)
+        candidate_flows = [f for f in upstream_flow_table.itervalues() if
+                           f.in_port == flow.in_port and
+                           f.logical_port == flow.logical_port and
+                           f.output == flow.output and
+                           f.evc_map is not None]        # This weeds out this flow
+
+        log.debug('find-matching-ingress-flow', candidate_flows=candidate_flows)
+        return candidate_flows[0].evc_map if len(candidate_flows) > 0 else None
+
+    def add_flow(self, flow, evc):
+        """
+        Add a new flow to an existing EVC-MAP. This can be called to add:
+          o an ACL flow to an existing utility EVC, or
+          o an ACL flow to an existing User Data Flow, or
+          o a User Data Flow to an existing ACL flow (and this needs the EVC updated
+            as well.
+
+        Note that the Downstream EVC provided is the one that matches this flow. If
+        this is adding an ACL to and existing User data flow, we DO NOT want to
+        change the EVC Map's EVC
+
+        :param flow: (FlowEntry) New flow
+        :param evc: (EVC) Matching EVC for downstream flow
+        """
+        from flow_entry import FlowEntry
+        # Create temporary EVC-MAP
+        assert flow.flow_direction in FlowEntry.upstream_flow_types, \
+            'Only Upstream flows additions are supported at this time'
+
+        log.debug('add-flow-to-evc', flow=flow, evc=evc)
+
+        tmp_map = EVCMap.create_ingress_map(flow, evc, dry_run=True) \
+            if flow.flow_direction in FlowEntry.upstream_flow_types \
+            else EVCMap.create_egress_map(flow, evc, dry_run=True)
+
+        if tmp_map is None or not tmp_map.valid:
+            return None
+
+        self._flows[flow.flow_id] = flow
+        self._needs_update = True
+
+        # Are there ACLs to add to any existing (or empty) ACLs
+        if len(tmp_map._new_acls) > 0:
+            self._new_acls.update(tmp_map._new_acls)        # New ACL flow
+            log.debug('add-acl-flows', map=str(self), new=tmp_map._new_acls)
+
+        # Look up existing EVC for this flow. If it is a service EVC for
+        # Packet In/Out, and this is a regular flow, migrate to the newer EVC
+        if self._evc.service_evc and not evc.service_evc:
+            log.info('new-evc-for-map', old=self._evc.name, new=evc.name)
+            self._evc.remove_evc_map(self)
+            evc.add_evc_map(self)
+            self._evc = evc
+
+        return self
+
+    @inlineCallbacks
+    def _remove_flow(self, flow):
+        """
+        Remove a specific flow from an EVC_MAP. This includes removing any
+        ACL entries associated with the flow and could result in moving the
+        EVC-MAP over to another EVC.
+
+        :param flow: (FlowEntry) Flow to remove
+        """
+        try:
+            del self._flows[flow.flow_id]
+
+            log('remove-flow-to-evc', flow=flow)
+            # Remove any ACLs
+            acl_name = ACL.flow_to_name(flow)
+            acl = None
+
+            # if not yet installed just remove it from list
+            if acl_name in self._new_acls:
+                del self._new_acls[acl_name]
+            else:
+                acl = self._existing_acls[acl_name]
+            if acl is not None:
+                # Remove ACL from EVC-MAP entry
+
+                try:
+                    map_xml = self._ingress_remove_acl_xml(self._gem_ids_and_vid, acl)
+                    log.debug('remove', xml=map_xml, name=acl.name)
+                    results = yield self._handler.netconf_client.edit_config(map_xml)
+                    if results.ok:
+                        del self._existing_acls[acl.name]
+
+                    # Scan EVC to see if it needs to move back to the Utility
+                    # or Untagged EVC from a user data EVC
+                    if self._evc and not self._evc.service_evc and\
+                        len(self._flows) > 0 and\
+                            all(f.is_acl_flow for f in self._flows.itervalues()):
+
+                        self._evc.remove_evc_map(self)
+                        first_flow = self._flows.itervalues().next()
+                        self._evc = first_flow.get_utility_evc(True)
+                        self._evc.add_evc_map(self)
+                        log.debug('moved-acl-flows-to-utility-evc', newevcname=self._evc.name)
+
+                        self._needs_update = True
+                        self._evc.schedule_install()
+
+                except Exception as e:
+                    log.exception('acl-remove-from-evc', e=e)
+
+                # Remove ACL itself
+                try:
+                    yield acl.remove()
+
+                except Exception as e:
+                    log.exception('acl-remove', e=e)
+
+        except Exception as e:
+            log.exception('remove-failed', e=e)
+
+    @staticmethod
+    def create_evc_map_name(flow):
+        # Note: When actually installed into the OLT, the .onu_id.gem_port is
+        #       appended to the name
+        return EVC_MAP_NAME_FORMAT.format(flow.logical_port, flow.flow_id)
+
+    @staticmethod
+    def decode_evc_map_name(name):
+        """
+        Reverse engineer EVC-MAP name parameters. Helpful in quick packet-in
+        processing
+
+        :param name: (str) EVC Map Name
+        :return: (dict) Logical Ingress Port, OpenFlow Flow-ID
+        """
+        items = name.split('-') if name is not None else dict()
+
+        # Note: When actually installed into the OLT, the .onu_id.gem_port is
+        #       appended to the name
+        return {'ingress-port': items[1],
+                'flow-id': items[2].split('.')[0]} if len(items) > 2 else dict()
+
+    @inlineCallbacks
+    def update_upstream_flow_bandwidth(self):
+        """
+        Upstream flow bandwidth comes from the flow_entry related to this EVC-MAP
+        and if no bandwidth property is found, allow full bandwidth
+        """
+        # all flows should should be on the same PON
+        flow = self._flows.itervalues().next()
+        is_pon = flow.handler.is_pon_port(flow.in_port)
+
+        if self._is_ingress_map and is_pon:
+            pon_port = flow.handler.get_southbound_port(flow.in_port)
+            if pon_port is None:
+                returnValue('no PON')
+
+            session = self._handler.rest_client
+            # TODO: Refactor with tech profiles
+            tconts = None               # pon_port.tconts
+            traffic_descriptors = None  # pon_port.traffic_descriptors
+
+            if traffic_descriptors is None or tconts is None:
+                returnValue('no TDs on PON')
+
+            bandwidth = self._upstream_bandwidth or 10000000000
+
+            if self.pon_id is not None and self.onu_id is not None:
+                name = 'tcont-{}-{}-data'.format(self.pon_id, self.onu_id)
+                td = traffic_descriptors.get(name)
+                tcont = tconts.get(name)
+
+                if td is not None and tcont is not None:
+                    alloc_id = tcont.alloc_id
+                    td.maximum_bandwidth = bandwidth
+                    try:
+                        results = yield td.add_to_hardware(session)
+                        log.debug('td-modify-results', results=results)
+
+                    except Exception as _e:
+                        pass
+
+    @inlineCallbacks
+    def update_downstream_flow_bandwidth(self, remove=False):
+        """
+        Downstream flow bandwidth is extracted from the related EVC flow_entry
+        bandwidth property. It is written to this EVC-MAP only if it is found
+        """
+        xml = None
+        results = None
+
+        if remove:
+            name, self._shaper_name = self._shaper_name, None
+            if name is not None:
+                xml = self._shaper_remove_xml(name)
+        else:
+            if self._evc is not None and self._evc.flow_entry is not None \
+                    and self._evc.flow_entry.bandwidth is not None:
+                self._shaper_name = self._name
+                xml = self._shaper_install_xml(self._shaper_name,
+                                               self._evc.flow_entry.bandwidth * 1000)  # kbps
+        if xml is not None:
+            try:
+                log.info('downstream-bandwidth', xml=xml, name=self.name, remove=remove)
+                results = yield self._handler.netconf_client.edit_config(xml)
+
+            except RPCError as rpc_err:
+                if rpc_err.tag == 'data-exists':
+                    pass
+
+            except Exception as e:
+                log.exception('downstream-bandwidth', name=self.name, remove=remove, e=e)
+                raise
+
+        returnValue(results)
+
+    def _shaper_install_xml(self, name, bandwidth):
+        xml = '<adtn-shaper:shapers xmlns:adtn-shaper="http://www.adtran.com/ns/yang/adtran-traffic-shapers" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">'
+        for onu_id, gem_ids_and_vid in self._gem_ids_and_vid.iteritems():
+            for gem_id in gem_ids_and_vid[0]:
+                xml += ' <adtn-shaper:shaper>'
+                xml += '  <adtn-shaper:name>{}.{}.{}</adtn-shaper:name>'.format(name, onu_id, gem_id)
+                xml += '  <adtn-shaper:enabled>true</adtn-shaper:enabled>'
+                xml += '  <adtn-shaper:rate>{}</adtn-shaper:rate>'.format(bandwidth)
+                xml += '  <adtn-shaper-evc-map:evc-map xmlns:adtn-shaper-evc-map="http://www.adtran.com/ns/yang/adtran-traffic-shaper-evc-maps">{}.{}.{}</adtn-shaper-evc-map:evc-map>'.format(self.name, onu_id, gem_id)
+                xml += ' </adtn-shaper:shaper>'
+        xml += '</adtn-shaper:shapers>'
+        return xml
+
+    def _shaper_remove_xml(self, name):
+        xml = '<adtn-shaper:shapers xmlns:adtn-shaper="http://www.adtran.com/ns/yang/adtran-traffic-shapers" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="delete">'
+        for onu_id, gem_ids_and_vid in self._gem_ids_and_vid.iteritems():
+            for gem_id in gem_ids_and_vid[0]:
+                xml += ' <adtn-shaper:shaper >'
+                xml += '  <adtn-shaper:name>{}.{}.{}</adtn-shaper:name>'.format(name, onu_id, gem_id)
+                xml += ' </adtn-shaper:shaper>'
+        xml += '</adtn-shaper:shapers>'
+        return xml
+
+    def _setup_tech_profiles(self):
+        # Set up the TCONT / GEM Ports for this connection (Downstream only of course)
+        # all flows should have same GEM port setup
+        flow = self._flows.itervalues().next()
+        is_pon = flow.handler.is_pon_port(flow.in_port)
+
+        if self._is_ingress_map and is_pon:
+            pon_port = flow.handler.get_southbound_port(flow.in_port)
+
+            if pon_port is None:
+                return
+
+            onu = next((onu for onu in pon_port.onus if onu.logical_port == flow.logical_port), None)
+
+            if onu is None:       # TODO: Add multicast support later (self.onu_id == None)
+                return
+
+            self._pon_id = pon_port.pon_id
+            self._onu_id = onu.onu_id
+
+            # Identify or allocate TCONT and GEM Ports.  If the ONU has been informed of the
+            # GEM PORTs that belong to it, the tech profiles were already set up by a previous
+            # flows
+            onu_gems = onu.gem_ids(self._tech_profile_id)
+
+            if len(onu_gems) > 0:
+                self._gem_ids_and_vid[onu.onu_id] = (onu_gems, flow.vlan_id)
+                return
+
+            uni_id = self._handler.platform.uni_id_from_uni_port(flow.logical_port)
+            pon_profile = self._handler.tech_profiles[self.pon_id]
+            alloc_id = None
+
+            try:
+                (ofp_port_name, ofp_port_no) = self._handler.get_ofp_port_name(self.pon_id,
+                                                                               self.onu_id,
+                                                                               flow.logical_port)
+                if ofp_port_name is None:
+                    log.error("port-name-not-found")
+                    return
+
+                # Check tech profile instance already exists for derived port name
+                tech_profile = pon_profile.get_tech_profile_instance(self._tech_profile_id,
+                                                                     ofp_port_name)
+                log.debug('Get-tech-profile-instance-status',
+                          tech_profile_instance=tech_profile)
+
+                if tech_profile is None:
+                    # create tech profile instance
+                    tech_profile = pon_profile.create_tech_profile_instance(self._tech_profile_id,
+                                                                            ofp_port_name,
+                                                                            self.pon_id)
+                    if tech_profile is None:
+                        raise Exception('Tech-profile-instance-creation-failed')
+                else:
+                    log.debug('Tech-profile-instance-already-exist-for-given port-name',
+                              ofp_port_name=ofp_port_name)
+
+                # upstream scheduler
+                us_scheduler = pon_profile.get_us_scheduler(tech_profile)
+
+                # downstream scheduler
+                ds_scheduler = pon_profile.get_ds_scheduler(tech_profile)
+
+                # create Tcont protobuf
+                pb_tconts = pon_profile.get_tconts(tech_profile, us_scheduler, ds_scheduler)
+
+                # create TCONTs & GEM Ports locally
+                for pb_tcont in pb_tconts:
+                    from ..xpon.olt_tcont import OltTCont
+                    tcont = OltTCont.create(pb_tcont,
+                                            self.pon_id,
+                                            self.onu_id,
+                                            self._tech_profile_id,
+                                            uni_id,
+                                            ofp_port_no)
+                    if tcont is not None:
+                        onu.add_tcont(tcont)
+
+                # Fetch alloc id and gemports from tech profile instance
+                alloc_id = tech_profile.us_scheduler.alloc_id
+
+                onu_gems = [gem.gemport_id for gem in tech_profile.upstream_gem_port_attribute_list]
+
+                for gem in tech_profile.upstream_gem_port_attribute_list:
+                    from ..xpon.olt_gem_port import OltGemPort
+                    gem_port = OltGemPort.create(self._handler,
+                                                 gem,
+                                                 tech_profile.us_scheduler.alloc_id,
+                                                 self._tech_profile_id,
+                                                 self.pon_id,
+                                                 self.onu_id,
+                                                 uni_id,
+                                                 ofp_port_no)
+                    if gem_port is not None:
+                        onu.add_gem_port(gem_port)
+
+                self._gem_ids_and_vid = {onu.onu_id: (onu_gems, flow.vlan_id)}
+
+                # Send technology profile information to ONU
+                reactor.callLater(0, self._handler.setup_onu_tech_profile, self._pon_id,
+                                  self.onu_id, flow.logical_port)
+
+            except BaseException as e:
+                log.exception(exception=e)
+
+            # Update the allocated alloc_id and gem_port_id for the ONU/UNI to KV store
+            pon_intf_onu_id = (self.pon_id, self.onu_id, uni_id)
+            resource_manager = self._handler.resource_mgr.resource_managers[self.pon_id]
+
+            resource_manager.update_alloc_ids_for_onu(pon_intf_onu_id, list([alloc_id]))
+            resource_manager.update_gemport_ids_for_onu(pon_intf_onu_id, onu_gems)
+
+            self._handler.resource_mgr.update_gemports_ponport_to_onu_map_on_kv_store(onu_gems,
+                                                                                      self.pon_id,
+                                                                                      self.onu_id,
+                                                                                      uni_id)
+
+    def _decode(self, evc):
+        from evc import EVC
+        from flow_entry import FlowEntry
+
+        # Only called from initializer, so first flow is only flow
+        flow = self._flows.itervalues().next()
+
+        self._name = EVCMap.create_evc_map_name(flow)
+
+        if evc:
+            self._evc_connection = EVCMap.EvcConnection.EVC
+        else:
+            self._status_message = 'Can only create EVC-MAP if EVC supplied'
+            return False
+
+        is_pon = flow.handler.is_pon_port(flow.in_port)
+        is_uni = flow.handler.is_uni_port(flow.in_port)
+
+        if flow.bandwidth is not None:
+            self._upstream_bandwidth = flow.bandwidth * 1000000
+
+        if is_pon or is_uni:
+            # Preserve CE VLAN tag only if utility VLAN/EVC
+            self._uni_port = flow.handler.get_port_name(flow.in_port)
+            evc.ce_vlan_preservation = evc.ce_vlan_preservation or False
+        else:
+            self._status_message = 'EVC-MAPS without UNI or PON ports are not supported'
+            return False    # UNI Ports handled in the EVC Maps
+
+        # ACL logic
+        self._eth_type = flow.eth_type
+
+        if self._eth_type == FlowEntry.EtherType.IPv4:
+            self._ip_protocol = flow.ip_protocol
+            self._ipv4_dst = flow.ipv4_dst
+
+            if self._ip_protocol == FlowEntry.IpProtocol.UDP:
+                self._udp_dst = flow.udp_dst
+                self._udp_src = flow.udp_src
+
+        # If no match of VLAN this may be for untagged traffic or upstream and needs to
+        # match the gem-port vid
+
+        self._setup_tech_profiles()
+
+        # self._match_untagged = flow.vlan_id is None and flow.inner_vid is None
+        self._c_tag = flow.inner_vid or flow.vlan_id
+
+        # If a push of a single VLAN is present with a POP of the VLAN in the EVC's
+        # flow, then this is a traditional EVC flow
+
+        evc.men_to_uni_tag_manipulation = EVC.Men2UniManipulation.POP_OUT_TAG_ONLY
+        evc.switching_method = EVC.SwitchingMethod.DOUBLE_TAGGED \
+            if self._c_tag is not None else EVC.SwitchingMethod.SINGLE_TAGGED
+
+        try:
+            acl = ACL.create(flow)
+            if acl.name not in self._new_acls:
+                self._new_acls[acl.name] = acl
+
+        except Exception as e:
+            log.exception('ACL-decoding', e=e)
+            return False
+
+        return True
+
+    # Bulk operations
+
+    @staticmethod
+    def remove_all(client, regex_=EVC_MAP_NAME_REGEX_ALL):
+        """
+        Remove all matching EVC Maps from hardware
+
+        :param client: (ncclient) NETCONF Client to use
+        :param regex_: (String) Regular expression for name matching
+        :return: (deferred)
+        """
+        # Do a 'get' on the evc-map config an you should get the names
+        get_xml = """
+        <filter>
+          <evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps">
+            <evc-map>
+              <name/>
+            </evc-map>
+          </evc-maps>
+        </filter>
+        """
+        log.debug('query', xml=get_xml, regex=regex_)
+
+        def request_failed(results, operation):
+            log.error('{}-failed'.format(operation), results=results)
+            # No further actions. Periodic poll later on will scrub any old EVC-Maps if needed
+
+        def delete_complete(results):
+            log.debug('delete-complete', results=results)
+
+        def do_delete(rpc_reply, regexpr):
+            log.debug('query-complete', rpc_reply=rpc_reply)
+
+            if rpc_reply.ok:
+                result_dict = xmltodict.parse(rpc_reply.data_xml)
+                entries = result_dict['data']['evc-maps'] if 'evc-maps' in result_dict['data'] else {}
+
+                if 'evc-map' in entries:
+                    p = re.compile(regexpr)
+
+                    if isinstance(entries['evc-map'], list):
+                        names = {entry['name'] for entry in entries['evc-map']
+                                 if 'name' in entry and p.match(entry['name'])}
+                    else:
+                        names = set()
+                        for item in entries['evc-map'].items():
+                            if isinstance(item, tuple) and item[0] == 'name':
+                                names.add(item[1])
+                                break
+
+                    if len(names) > 0:
+                        del_xml = '<evc-maps xmlns="http://www.adtran.com/ns/yang/adtran-evc-maps"' + \
+                                 ' xc:operation = "delete">'
+                        for name in names:
+                            del_xml += '<evc-map>'
+                            del_xml += '<name>{}</name>'.format(name)
+                            del_xml += '</evc-map>'
+                        del_xml += '</evc-maps>'
+                        log.debug('removing', xml=del_xml)
+
+                        return client.edit_config(del_xml)
+
+            return succeed('no entries')
+
+        d = client.get(get_xml)
+        d.addCallbacks(do_delete, request_failed, callbackArgs=[regex_], errbackArgs=['get'])
+        d.addCallbacks(delete_complete, request_failed, errbackArgs=['edit-config'])
+        return d
+
+    def _cancel_deferred(self):
+        d, self._deferred = self._deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
diff --git a/adapters/adtran_common/flow/flow_entry.py b/adapters/adtran_common/flow/flow_entry.py
new file mode 100644
index 0000000..cb8dd4a
--- /dev/null
+++ b/adapters/adtran_common/flow/flow_entry.py
@@ -0,0 +1,821 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+from evc import EVC
+from evc_map import EVCMap
+from enum import IntEnum
+from utility_evc import UtilityEVC
+import pyvoltha.common.openflow.utils as fd
+from pyvoltha.protos.openflow_13_pb2 import OFPP_MAX, OFPP_CONTROLLER, OFPVID_PRESENT, OFPXMC_OPENFLOW_BASIC
+from twisted.internet.defer import returnValue, inlineCallbacks, gatherResults
+
+log = structlog.get_logger()
+
+# IP Protocol numbers
+_supported_ip_protocols = [
+    1,          # ICMP
+    2,          # IGMP
+    6,          # TCP
+    17,         # UDP
+]
+
+
+class FlowEntry(object):
+    """
+    Provide a class that wraps the flow rule and also provides state/status for a FlowEntry.
+
+    When a new flow is sent, it is first decoded to check for any potential errors. If None are
+    found, the entry is created and it is analyzed to see if it can be combined to with any other flows
+    to create or modify an existing EVC.
+
+    Note: Since only E-LINE is supported, modification of an existing EVC is not performed.
+    """
+    class PortType(IntEnum):
+        NNI = 0         # NNI Port
+        UNI = 1         # UNI Port
+        PON = 2         # PON Port (all UNIs on PON)
+        CONTROLLER = 3  # Controller port (packet in/out)
+
+    class FlowDirection(IntEnum):
+        UPSTREAM = 0          # UNI port to NNI Port
+        DOWNSTREAM = 1        # NNI port to UNI Port
+        CONTROLLER_UNI = 2    # Trap packet on UNI and send to controller
+        NNI_PON = 3           # NNI port to PON Port (all UNIs) - Utility VLAN & multicast
+
+        # The following are not yet supported
+        CONTROLLER_NNI = 4    # Trap packet on NNI and send to controller
+        CONTROLLER_PON = 5    # Trap packet on all UNIs of a PON and send to controller
+        NNI_NNI = 6           # NNI port to NNI Port
+        UNI_UNI = 7           # UNI port to UNI Port
+        OTHER = 9             # Unable to determine
+
+    upstream_flow_types = {FlowDirection.UPSTREAM, FlowDirection.CONTROLLER_UNI}
+    downstream_flow_types = {FlowDirection.DOWNSTREAM, FlowDirection.NNI_PON}
+
+    LEGACY_CONTROL_VLAN = 4000
+
+    # Well known EtherTypes
+    class EtherType(IntEnum):
+        EAPOL = 0x888E
+        IPv4 = 0x0800
+        IPv6 = 0x86DD
+        ARP = 0x0806
+        LLDP = 0x88CC
+
+    # Well known IP Protocols
+    class IpProtocol(IntEnum):
+        IGMP = 2
+        UDP = 17
+
+    def __init__(self, flow, handler):
+        self._flow = flow
+        self._handler = handler
+        self.flow_id = flow.id
+        self.evc = None              # EVC this flow is part of
+        self.evc_map = None          # EVC-MAP this flow is part of
+        self._flow_direction = FlowEntry.FlowDirection.OTHER
+        self._logical_port = None    # Currently ONU VID is logical port if not doing xPON
+        self._is_multicast = False
+        self._is_acl_flow = False
+        self._bandwidth = None
+
+        # A value used to locate possible related flow entries
+        self.signature = None
+        self.downstream_signature = None  # Valid for upstream EVC-MAP Flows
+
+        # Selection properties
+        self.in_port = None
+        self.vlan_id = None
+        self.pcp = None
+        self.eth_type = None
+        self.ip_protocol = None
+        self.ipv4_dst = None
+        self.udp_dst = None         # UDP Port #
+        self.udp_src = None         # UDP Port #
+        self.inner_vid = None
+
+        # Actions
+        self.output = None
+        self.pop_vlan = False
+        self.push_vlan_tpid = None
+        self.push_vlan_id = None
+
+        self._name = self.create_flow_name()
+
+    def __str__(self):
+        return 'flow_entry: {}, in: {}, out: {}, vid: {}, inner:{}, eth: {}, IP: {}'.format(
+            self.name, self.in_port, self.output, self.vlan_id, self.inner_vid,
+            self.eth_type, self.ip_protocol)
+
+    def __repr__(self):
+        return str(self)
+
+    @property
+    def name(self):
+        return self._name    # TODO: Is a name really needed in production?
+
+    def create_flow_name(self):
+        return 'flow-{}-{}'.format(self.device_id, self.flow_id)
+
+    @property
+    def flow(self):
+        return self._flow
+
+    @property
+    def handler(self):
+        return self._handler
+
+    @property
+    def device_id(self):
+        return self.handler.device_id
+
+    @property
+    def bandwidth(self):
+        """ Bandwidth in Mbps (if any) """
+        return self._bandwidth
+
+    @property
+    def flow_direction(self):
+        return self._flow_direction
+
+    @property
+    def is_multicast_flow(self):
+        return self._is_multicast
+
+    @property
+    def is_acl_flow(self):
+        return self._is_acl_flow or self._needs_acl_support
+
+    @property
+    def logical_port(self):
+        return self._logical_port   # NNI or UNI Logical Port
+
+    @staticmethod
+    def create(flow, handler):
+        """
+        Create the appropriate FlowEntry wrapper for the flow.  This method returns a two
+        results.
+
+        The first result is the flow entry that was created. This could be a match to an
+        existing flow since it is a bulk update.  None is returned only if no match to
+        an existing entry is found and decode failed (unsupported field)
+
+        The second result is the EVC this flow should be added to. This could be an
+        existing flow (so your adding another EVC-MAP) or a brand new EVC (no existing
+        EVC-MAPs).  None is returned if there are not a valid EVC that can be created YET.
+
+        :param flow:   (Flow) Flow entry passed to VOLTHA adapter
+        :param handler: (AdtranDeviceHandler) handler for the device
+        :return: (FlowEntry, EVC)
+        """
+        # Exit early if it already exists
+        try:
+            flow_entry = FlowEntry(flow, handler)
+
+            ######################################################################
+            # Decode the flow entry
+            if not flow_entry._decode(flow):
+                # TODO: When we support individual flow mods, we will need to return
+                #       this flow back always
+                return None, None
+
+            ######################################################################
+            # Initialize flow_entry database (dicts) if needed and determine if
+            # the flows have already been handled.
+            downstream_sig_table = handler.downstream_flows
+            upstream_flow_table = handler.upstream_flows
+
+            log.debug('flow-entry-decoded', flow=flow_entry, signature=flow_entry.signature,
+                      downstream_signature=flow_entry.downstream_signature)
+
+            if flow_entry.flow_direction in FlowEntry.upstream_flow_types and\
+                    flow_entry.flow_id in upstream_flow_table:
+                log.debug('flow-entry-upstream-exists', flow=flow_entry)
+                return flow_entry, None
+
+            if flow_entry.flow_direction in FlowEntry.downstream_flow_types:
+                sig_table = downstream_sig_table.get(flow_entry.signature)
+                if sig_table is not None and flow_entry in sig_table.flows:
+                    log.debug('flow-entry-downstream-exists', flow=flow_entry)
+                    return flow_entry, None
+
+            ######################################################################
+            # Look for any matching flows in the other direction that might help
+            # make an EVC and then save it off in the device specific flow table
+            #
+            # TODO: For now, only support for E-LINE services between NNI and UNI
+            downstream_flow = None
+            upstream_flows = None
+            downstream_sig = None
+
+            if flow_entry._is_multicast:        # Uni-directional flow
+                assert flow_entry._flow_direction in FlowEntry.downstream_flow_types, \
+                    'Only downstream Multicast supported'
+                downstream_flow = flow_entry
+                downstream_sig = flow_entry.signature
+                upstream_flows = []
+
+            elif flow_entry.flow_direction in FlowEntry.downstream_flow_types:
+                downstream_flow = flow_entry
+                downstream_sig = flow_entry.signature
+
+            elif flow_entry.flow_direction in FlowEntry.upstream_flow_types:
+                downstream_sig = flow_entry.downstream_signature
+
+            if downstream_sig is None:
+                # TODO: When we support individual flow mods, we will need to return
+                #       this flow back always
+                log.debug('flow-entry-empty-downstream', flow=flow_entry)
+                return None, None
+
+            # Make sure a slot exists for the downstream signature and get its flow table
+            downstream_sig_table = downstream_sig_table.add(downstream_sig)
+            evc = downstream_sig_table.evc
+
+            # Save the new flow_entry to proper flow table
+            if flow_entry.flow_direction in FlowEntry.upstream_flow_types:
+                upstream_flow_table.add(flow_entry)
+                downstream_flow = evc.flow_entry if evc is not None else \
+                    next((_flow for _flow in downstream_sig_table.flows.itervalues()
+                          if isinstance(_flow, FlowEntry)), None)
+
+            elif flow_entry.flow_direction in FlowEntry.downstream_flow_types:
+                downstream_sig_table.flows.add(flow_entry)
+
+            # Now find all the upstream flows
+            if downstream_flow is not None:
+                upstream_flows = [_flow for _flow in upstream_flow_table.itervalues()
+                                  if _flow.downstream_signature == downstream_flow.signature]
+                if len(upstream_flows) == 0 and not downstream_flow.is_multicast_flow:
+                    upstream_flows = None
+
+            log.debug('flow-entry-search-results', flow=flow_entry,
+                      downstream_flow=downstream_flow, upstream_flows=upstream_flows)
+
+            ######################################################################
+            # Compute EVC and and maps
+            evc = FlowEntry._create_evc_and_maps(evc, downstream_flow, upstream_flows)
+
+            # Save off EVC (if we have one) for this flow if it is new
+            if evc is not None and evc.valid and downstream_sig_table.evc is None:
+                downstream_sig_table.evc = evc
+
+            return flow_entry, evc
+
+        except Exception as e:
+            log.exception('flow-entry-processing', e=e)
+            return None, None
+
+    @staticmethod
+    def _create_evc_and_maps(evc, downstream_flow, upstream_flows):
+        """
+        Give a set of flows, find (or create) the EVC and any needed EVC-MAPs
+
+        :param evc: (EVC) Existing EVC for downstream flow. May be null if not created
+        :param downstream_flow: (FlowEntry) NNI -> UNI flow (provides much of the EVC values)
+        :param upstream_flows: (list of FlowEntry) UNI -> NNI flows (provides much of the EVC-MAP values)
+
+        :return: EVC object
+        """
+        log.debug('flow-evc-and-maps', downstream_flow=downstream_flow,
+                  upstream_flows=upstream_flows)
+
+        if (evc is None and downstream_flow is None) or upstream_flows is None:
+            return None
+
+        # Get any existing EVC if a flow is already created
+        if downstream_flow.evc is None:
+            if evc is not None:
+                downstream_flow.evc = evc
+
+            elif downstream_flow.is_multicast_flow:
+                from mcast import MCastEVC
+                downstream_flow.evc = MCastEVC.create(downstream_flow)
+
+            elif downstream_flow.is_acl_flow:
+                downstream_flow.evc = downstream_flow.get_utility_evc()
+            else:
+                downstream_flow.evc = EVC(downstream_flow)
+
+        if not downstream_flow.evc.valid:
+            log.debug('flow-evc-and-maps-downstream-invalid',
+                      downstream_flow=downstream_flow,
+                      upstream_flows=upstream_flows)
+            return None
+
+        # Create EVC-MAPs. Note upstream_flows is empty list for multicast
+        # For Packet In/Out support. The upstream flows for will have matching
+        # signatures. So the first one to get created should create the EVC and
+        # if it needs and ACL, do so then. The second one should just reference
+        # the first map.
+        #
+        #    If the second has and ACL, then it should add it to the map.
+        #    TODO: What to do if the second (or third, ...) is the data one.
+        #          What should it do then?
+        sig_map_map = {f.signature: f.evc_map for f in upstream_flows
+                       if f.evc_map is not None}
+
+        for flow in upstream_flows:
+            if flow.evc_map is None:
+                if flow.signature in sig_map_map:
+                    # Found an explicitly matching existing EVC-MAP. Add flow to this EVC-MAP
+                    flow.evc_map = sig_map_map[flow.signature].add_flow(flow, downstream_flow.evc)
+                else:
+                    # May need to create a MAP or search for an existing ACL/user EVC-Map
+                    # upstream_flow_table = _existing_upstream_flow_entries[flow.device_id]
+                    upstream_flow_table = flow.handler.upstream_flows
+                    existing_flow = EVCMap.find_matching_ingress_flow(flow, upstream_flow_table)
+
+                    if existing_flow is None:
+                        flow.evc_map = EVCMap.create_ingress_map(flow, downstream_flow.evc)
+                    else:
+                        flow.evc_map = existing_flow.add_flow(flow, downstream_flow.evc)
+
+        all_maps_valid = all(flow.evc_map.valid for flow in upstream_flows) \
+            or downstream_flow.is_multicast_flow
+
+        log.debug('flow-evc-and-maps-downstream',
+                  downstream_flow=downstream_flow,
+                  upstream_flows=upstream_flows, all_valid=all_maps_valid)
+
+        return downstream_flow.evc if all_maps_valid else None
+
+    def get_utility_evc(self, use_default_vlan_id=False):
+        assert self.is_acl_flow, 'Utility evcs are for acl flows only'
+        return UtilityEVC.create(self, use_default_vlan_id)
+
+    @property
+    def _needs_acl_support(self):
+        if self.ipv4_dst is not None:  # In case MCAST downstream has ACL on it
+            return False
+
+        return self.eth_type is not None or self.ip_protocol is not None or\
+            self.ipv4_dst is not None or self.udp_dst is not None or self.udp_src is not None
+
+    def _decode(self, flow):
+        """
+        Examine flow rules and extract appropriate settings
+        """
+        log.debug('start-decode')
+        status = self._decode_traffic_selector(flow) and self._decode_traffic_treatment(flow)
+
+        # Determine direction of the flow and apply appropriate modifications
+        # to the decoded flows
+        if status:
+            if not self._decode_flow_direction():
+                return False
+
+            if self._flow_direction in FlowEntry.downstream_flow_types:
+                status = self._apply_downstream_mods()
+
+            elif self._flow_direction in FlowEntry.upstream_flow_types:
+                status = self._apply_upstream_mods()
+
+            else:
+                # TODO: Need to code this - Perhaps this is an NNI_PON for Multicast support?
+                log.error('unsupported-flow-direction')
+                status = False
+
+            log.debug('flow-evc-decode', direction=self._flow_direction, is_acl=self._is_acl_flow,
+                      inner_vid=self.inner_vid, vlan_id=self.vlan_id, pop_vlan=self.pop_vlan,
+                      push_vid=self.push_vlan_id, status=status)
+
+        # Create a signature that will help locate related flow entries on a device.
+        if status:
+            # These are not exact, just ones that may be put together to make an EVC. The
+            # basic rules are:
+            #
+            # 1 - Port numbers in increasing order
+            ports = [self.in_port, self.output]
+            ports.sort()
+            assert len(ports) == 2, 'Invalid port count: {}'.format(len(ports))
+
+            # 3 - The outer VID
+            # 4 - The inner VID.  Wildcard if downstream
+            if self.push_vlan_id is None:
+                outer = self.vlan_id
+                inner = self.inner_vid
+            else:
+                outer = self.push_vlan_id
+                inner = self.vlan_id
+
+            upstream_sig = '{}'.format(ports[0])
+            downstream_sig = '{}'.format(ports[0])
+            upstream_sig += '.{}'.format(ports[1])
+            downstream_sig += '.{}'.format(ports[1] if self.handler.is_nni_port(ports[1]) else '*')
+
+            upstream_sig += '.{}.{}'.format(outer, inner)
+            downstream_sig += '.{}.*'.format(outer)
+
+            if self._flow_direction in FlowEntry.downstream_flow_types:
+                self.signature = downstream_sig
+
+            elif self._flow_direction in FlowEntry.upstream_flow_types:
+                self.signature = upstream_sig
+                self.downstream_signature = downstream_sig
+
+            else:
+                log.error('unsupported-flow')
+                status = False
+
+            log.debug('flow-evc-decode', upstream_sig=self.signature, downstream_sig=self.downstream_signature)
+        return status
+
+    def _decode_traffic_selector(self, flow):
+        """
+        Extract EVC related traffic selection settings
+        """
+        self.in_port = fd.get_in_port(flow)
+
+        if self.in_port > OFPP_MAX:
+            log.warn('logical-input-ports-not-supported', in_port=self.in_port)
+            return False
+
+        for field in fd.get_ofb_fields(flow):
+            if field.type == fd.IN_PORT:
+                if self._handler.is_nni_port(self.in_port) or self._handler.is_uni_port(self.in_port):
+                    self._logical_port = self.in_port
+
+            elif field.type == fd.VLAN_VID:
+                if field.vlan_vid >= OFPVID_PRESENT + 4095:
+                    self.vlan_id = None             # pre-ONOS v1.13.5 or old EAPOL Rule
+                else:
+                    self.vlan_id = field.vlan_vid & 0xfff
+
+                log.debug('*** field.type == VLAN_VID', value=field.vlan_vid, vlan_id=self.vlan_id)
+
+            elif field.type == fd.VLAN_PCP:
+                log.debug('*** field.type == VLAN_PCP', value=field.vlan_pcp)
+                self.pcp = field.vlan_pcp
+
+            elif field.type == fd.ETH_TYPE:
+                log.debug('*** field.type == ETH_TYPE', value=field.eth_type)
+                self.eth_type = field.eth_type
+
+            elif field.type == fd.IP_PROTO:
+                log.debug('*** field.type == IP_PROTO', value=field.ip_proto)
+                self.ip_protocol = field.ip_proto
+
+                if self.ip_protocol not in _supported_ip_protocols:
+                    log.error('Unsupported IP Protocol', protocol=self.ip_protocol)
+                    return False
+
+            elif field.type == fd.IPV4_DST:
+                log.debug('*** field.type == IPV4_DST', value=field.ipv4_dst)
+                self.ipv4_dst = field.ipv4_dst
+
+            elif field.type == fd.UDP_DST:
+                log.debug('*** field.type == UDP_DST', value=field.udp_dst)
+                self.udp_dst = field.udp_dst
+
+            elif field.type == fd.UDP_SRC:
+                log.debug('*** field.type == UDP_SRC', value=field.udp_src)
+                self.udp_src = field.udp_src
+
+            elif field.type == fd.METADATA:
+                if self._handler.is_nni_port(self.in_port):
+                    # Downstream flow
+                    log.debug('*** field.type == METADATA', value=field.table_metadata)
+
+                    if field.table_metadata > 4095:
+                        # ONOS v1.13.5 or later. c-vid in upper 32-bits
+                        vid = field.table_metadata & 0x0FFF
+                        if vid > 0:
+                            self.inner_vid = vid        # CTag is never '0'
+
+                    elif field.table_metadata > 0:
+                        # Pre-ONOS v1.13.5 (vid without the 4096 offset)
+                        self.inner_vid = field.table_metadata
+
+                else:
+                    # Upstream flow
+                    pass   # Not used upstream at this time
+
+                log.debug('*** field.type == METADATA', value=field.table_metadata,
+                          inner_vid=self.inner_vid)
+            else:
+                log.warn('unsupported-selection-field', type=field.type)
+                self._status_message = 'Unsupported field.type={}'.format(field.type)
+                return False
+
+        return True
+
+    def _decode_traffic_treatment(self, flow):
+        # Loop through traffic treatment
+        for act in fd.get_actions(flow):
+            if act.type == fd.OUTPUT:
+                self.output = act.output.port
+
+            elif act.type == fd.POP_VLAN:
+                log.debug('*** action.type == POP_VLAN')
+                self.pop_vlan = True
+
+            elif act.type == fd.PUSH_VLAN:
+                log.debug('*** action.type == PUSH_VLAN', value=act.push)
+                tpid = act.push.ethertype
+                self.push_vlan_tpid = tpid
+
+            elif act.type == fd.SET_FIELD:
+                log.debug('*** action.type == SET_FIELD', value=act.set_field.field)
+                assert (act.set_field.field.oxm_class == OFPXMC_OPENFLOW_BASIC)
+                field = act.set_field.field.ofb_field
+
+                if field.type == fd.VLAN_VID:
+                    self.push_vlan_id = field.vlan_vid & 0xfff
+                else:
+                    log.debug('unsupported-set-field')
+            else:
+                log.warn('unsupported-action', action=act)
+                self._status_message = 'Unsupported action.type={}'.format(act.type)
+                return False
+
+        return True
+
+    def _decode_flow_direction(self):
+        # Determine direction of the flow
+        def port_type(port_number):
+            if port_number in self._handler.northbound_ports:
+                return FlowEntry.PortType.NNI
+
+            elif port_number in self._handler.southbound_ports:
+                return FlowEntry.PortType.PON
+
+            elif port_number <= OFPP_MAX:
+                return FlowEntry.PortType.UNI
+
+            elif port_number in {OFPP_CONTROLLER, 0xFFFFFFFD}:      # OFPP_CONTROLLER is wrong in proto-file
+                return FlowEntry.PortType.CONTROLLER
+
+            return FlowEntry.PortType.OTHER
+
+        flow_dir_map = {
+            (FlowEntry.PortType.UNI, FlowEntry.PortType.NNI):        FlowEntry.FlowDirection.UPSTREAM,
+            (FlowEntry.PortType.NNI, FlowEntry.PortType.UNI):        FlowEntry.FlowDirection.DOWNSTREAM,
+            (FlowEntry.PortType.UNI, FlowEntry.PortType.CONTROLLER): FlowEntry.FlowDirection.CONTROLLER_UNI,
+            (FlowEntry.PortType.NNI, FlowEntry.PortType.PON):        FlowEntry.FlowDirection.NNI_PON,
+            # The following are not yet supported
+            # (FlowEntry.PortType.NNI, FlowEntry.PortType.CONTROLLER): FlowEntry.FlowDirection.CONTROLLER_NNI,
+            # (FlowEntry.PortType.PON, FlowEntry.PortType.CONTROLLER): FlowEntry.FlowDirection.CONTROLLER_PON,
+            # (FlowEntry.PortType.NNI, FlowEntry.PortType.NNI):        FlowEntry.FlowDirection.NNI_NNI,
+            # (FlowEntry.PortType.UNI, FlowEntry.PortType.UNI):        FlowEntry.FlowDirection.UNI_UNI,
+        }
+        self._flow_direction = flow_dir_map.get((port_type(self.in_port), port_type(self.output)),
+                                                FlowEntry.FlowDirection.OTHER)
+        return self._flow_direction != FlowEntry.FlowDirection.OTHER
+
+    def _apply_downstream_mods(self):
+        # This is a downstream flow.  It could be any one of the following:
+        #
+        #   Legacy control VLAN:
+        #       This is the old VLAN 4000 that was used to attach EAPOL and other
+        #       controller flows to. Eventually these will change to CONTROLLER_UNI
+        #       flows.  For these, use the 'utility' VLAN instead so 4000 if available
+        #       for other uses (AT&T uses it for downstream multicast video).
+        #
+        #   Multicast VLAN:
+        #       This is downstream multicast data.
+        #       TODO: Test this to see if this needs to be in a separate NNI_PON mod-method
+        #
+        #   User Data flow:
+        #       This is for user data.  Eventually we may need to support ACLs?
+        #
+        # May be for to controller flow downstream (no ethType)
+        if self.vlan_id == FlowEntry.LEGACY_CONTROL_VLAN and self.eth_type is None and self.pcp == 0:
+            return False    # Do not install this flow.  Utility VLAN is in charge
+
+        elif self.flow_direction == FlowEntry.FlowDirection.NNI_PON and \
+                self.vlan_id == self.handler.utility_vlan:
+            # Utility VLAN downstream flow/EVC
+            self._is_acl_flow = True
+
+        elif self.vlan_id in self._handler.multicast_vlans:
+            #  multicast (ethType = IP)                         # TODO: May need to be an NNI_PON flow
+            self._is_multicast = True
+            self._is_acl_flow = True
+
+        else:
+            # Currently do not support ACLs on user data flows downstream
+            assert not self._needs_acl_support    # User data, no special modifications needed at this time
+
+        return True
+
+    def _apply_upstream_mods(self):
+        #
+        # This is an upstream flow.  It could be any of the following
+        #
+        #   ACL/Packet capture:
+        #       This is either a legacy (FlowDirection.UPSTREAM) or a new one
+        #       that specifies an output port of controller (FlowDirection.CONTROLLER_UNI).
+        #       Either way, these need to be placed on the Utility VLAN if the ONU attached
+        #       does not have a user-data flow (C-Tag).  If there is a C-Tag available,
+        #       then place it on that VLAN.
+        #
+        #       Once a user-data flow is established, move any of the ONUs ACL flows
+        #       over to that VLAN (this is handled elsewhere).
+        #
+        #   User Data flows:
+        #       No special modifications are needed
+        #
+        try:
+            # Do not handle PON level ACLs in this method
+            assert(self._flow_direction != FlowEntry.FlowDirection.CONTROLLER_PON)
+
+            # Is this a legacy (VLAN 4000) upstream to-controller flow
+            if self._needs_acl_support and FlowEntry.LEGACY_CONTROL_VLAN == self.push_vlan_id:
+                self._flow_direction = FlowEntry.FlowDirection.CONTROLLER_UNI
+                self._is_acl_flow = True
+                self.push_vlan_id = self.handler.utility_vlan
+
+            return True
+
+        except Exception as e:
+            # TODO: Need to support flow retry if the ONU is not yet activated   !!!!
+            log.exception('tag-fixup', e=e)
+            return False
+
+    @staticmethod
+    def drop_missing_flows(handler, valid_flow_ids):
+        dl = []
+        try:
+            flow_table = handler.upstream_flows
+            flows_to_drop = [flow for flow_id, flow in flow_table.items()
+                             if flow_id not in valid_flow_ids]
+            dl.extend([flow.remove() for flow in flows_to_drop])
+
+            for sig_table in handler.downstream_flows.itervalues():
+                flows_to_drop = [flow for flow_id, flow in sig_table.flows.items()
+                                 if isinstance(flow, FlowEntry) and flow_id not in valid_flow_ids]
+                dl.extend([flow.remove() for flow in flows_to_drop])
+
+        except Exception as _e:
+            pass
+
+        return gatherResults(dl, consumeErrors=True) if len(dl) > 0 else returnValue('no-flows-to-drop')
+
+    @inlineCallbacks
+    def remove(self):
+        """
+        Remove this flow entry from the list of existing entries and drop EVC
+        if needed
+        """
+        # Remove from exiting table list
+        flow_id = self.flow_id
+        flow_table = None
+
+        if self.flow_direction in FlowEntry.upstream_flow_types:
+            flow_table = self._handler.upstream_flows
+
+        elif self.flow_direction in FlowEntry.downstream_flow_types:
+            sig_table = self._handler.downstream_flows.get(self.signature)
+            flow_table = sig_table.flows if sig_table is not None else None
+
+        if flow_table is None or flow_id not in flow_table.keys():
+            returnValue('NOP')
+
+        # Remove from flow table and clean up flow table if empty
+        flow_table.remove(flow_id)
+        evc_map, self.evc_map = self.evc_map, None
+        evc = None
+
+        if self.flow_direction in FlowEntry.downstream_flow_types:
+            sig_table = self._handler.downstream_flows.get(self.signature)
+            if len(flow_table) == 0:   # Only 'evc' entry present
+                evc = sig_table.evc
+            else:
+                assert sig_table.evc is not None, 'EVC flow re-assignment error'
+
+        # Remove flow from the hardware
+        try:
+            dl = []
+            if evc_map is not None:
+                dl.append(evc_map.delete(self))
+
+            if evc is not None:
+                dl.append(evc.delete())
+
+            yield gatherResults(dl, consumeErrors=True)
+
+        except Exception as e:
+            log.exception('removal', e=e)
+
+        if self.flow_direction in FlowEntry.downstream_flow_types:
+            # If this flow owns the EVC, assign it to a remaining flow
+            sig_table = self._handler.downstream_flows.get(self.signature)
+            flow_evc = sig_table.evc
+
+            if flow_evc is not None and flow_evc.flow_entry is not None and flow_id == flow_evc.flow_entry.flow_id:
+                flow_evc.flow_entry = next((_flow for _flow in flow_table.itervalues()
+                                           if isinstance(_flow, FlowEntry)
+                                           and _flow.flow_id != flow_id), None)
+
+        # If evc was deleted, remove the signature table since now flows exist with
+        # that signature
+        if evc is not None:
+            self._handler.downstream_flows.remove(self.signature)
+
+        self.evc = None
+        returnValue('Done')
+
+    @staticmethod
+    def find_evc_map_flows(onu):
+        """
+        For a given OLT, find all the EVC Maps for a specific ONU
+        :param onu: (Onu) onu
+        :return: (list) of matching flows
+        """
+        # EVCs are only in the downstream table, EVC Maps are in upstream
+        onu_ports = onu.uni_ports
+
+        all_flow_entries = onu.olt.upstream_flows
+        evc_maps = [flow_entry.evc_map for flow_entry in all_flow_entries.itervalues()
+                    if flow_entry.in_port in onu_ports
+                    and flow_entry.evc_map is not None
+                    and flow_entry.evc_map.valid]
+
+        return evc_maps
+
+    @staticmethod
+    def sync_flows_by_onu(onu, reflow=False):
+        """
+        Check status of all flows on a per-ONU basis. Called when values
+        within the ONU are modified that may affect traffic.
+
+        :param onu: (Onu) ONU to examine
+        :param reflow: (boolean) Flag, if True, requests that the flow be sent to
+                                 hardware even if the values in hardware are
+                                 consistent with the current flow settings
+        """
+        evc_maps = FlowEntry.find_evc_map_flows(onu)
+        evcs = {}
+
+        for evc_map in evc_maps:
+            if reflow or evc_map.reflow_needed():
+                evc_map.needs_update = False
+
+            if not evc_map.installed:
+                evc = evc_map.evc
+                if evc is not None:
+                    evcs[evc.name] = evc
+
+        for evc in evcs.itervalues():
+            evc.installed = False
+            evc.schedule_install(delay=2)
+
+    ######################################################
+    # Bulk operations
+
+    @staticmethod
+    def clear_all(handler):
+        """
+        Remove all flows for the device.
+
+        :param handler: voltha adapter device handler
+        """
+        handler.downstream_flows.clear_all()
+        handler.upstream_flows.clear_all()
+
+    @staticmethod
+    def get_packetout_info(handler, logical_port):
+        """
+        Find parameters needed to send packet out successfully to the OLT.
+
+        :param handler: voltha adapter device handler
+        :param logical_port: (int) logical port number for packet to go out.
+
+        :return: physical port number, ctag, stag, evcmap name
+        """
+        from adapters.adtran_olt.onu import Onu
+
+        for flow_entry in handler.upstream_flows.itervalues():
+            log.debug('get-packetout-info', flow_entry=flow_entry)
+
+            # match logical port
+            if flow_entry.evc_map is not None and flow_entry.evc_map.valid and \
+               flow_entry.logical_port == logical_port:
+                evc_map = flow_entry.evc_map
+                gem_ids_and_vid = evc_map.gem_ids_and_vid
+
+                # must have valid gem id
+                if len(gem_ids_and_vid) > 0:
+                    for onu_id, gem_ids_with_vid in gem_ids_and_vid.iteritems():
+                        log.debug('get-packetout-info', onu_id=onu_id, 
+                                  gem_ids_with_vid=gem_ids_with_vid)
+                        if len(gem_ids_with_vid) > 0:
+                            gem_ids = gem_ids_with_vid[0]
+                            ctag = gem_ids_with_vid[1]
+                            gem_id = gem_ids[0]     # TODO: always grab first in list
+                            return flow_entry.in_port, ctag, Onu.gem_id_to_gvid(gem_id), \
+                                evc_map.get_evcmap_name(onu_id, gem_id)
+        return None, None, None, None
diff --git a/adapters/adtran_common/flow/flow_tables.py b/adapters/adtran_common/flow/flow_tables.py
new file mode 100644
index 0000000..48e2e7e
--- /dev/null
+++ b/adapters/adtran_common/flow/flow_tables.py
@@ -0,0 +1,163 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from flow_entry import FlowEntry
+from evc import EVC
+
+
+class DeviceFlows(object):
+    """ Tracks existing flows on the device """
+
+    def __init__(self):
+        self._flow_table = dict()   # Key = (str)Flow ID, Value = FlowEntry
+
+    def __getitem__(self, item):
+        flow_id = item.flow_id if isinstance(item, FlowEntry) else item
+        return self._flow_table[flow_id]
+
+    def __iter__(self):
+        for _flow_id, _flow in self._flow_table.items():
+            yield _flow_id, _flow
+
+    def itervalues(self):
+        for _flow in self._flow_table.values():
+            yield _flow
+
+    def iterkeys(self):
+        for _id in self._flow_table.keys():
+            yield _id
+
+    def items(self):
+        return self._flow_table.items()
+
+    def values(self):
+        return self._flow_table.values()
+
+    def keys(self):
+        return self._flow_table.keys()
+
+    def __len__(self):
+        return len(self._flow_table)
+
+    def add(self, flow):
+        assert isinstance(flow, FlowEntry)
+        if flow.flow_id not in self._flow_table:
+            self._flow_table[flow.flow_id] = flow
+        return flow
+
+    def get(self, item):
+        flow_id = item.flow_id if isinstance(item, FlowEntry) else item
+        return self._flow_table.get(flow_id)
+
+    def remove(self, item):
+        flow_id = item.flow_id if isinstance(item, FlowEntry) else item
+        return self._flow_table.pop(flow_id, None)
+
+    def clear_all(self):
+        self._flow_table = dict()
+
+
+class DownstreamFlows(object):
+    """
+    Tracks existing flows that are downstream (NNI as source port)
+
+    The downstream table is slightly different than the base DeviceFlows
+    table as it is used to track flows that will become EVCs.  The base
+    table tracks flows that will be EVC-maps (or related to them).
+
+    The downstream table is also indexed by a downstream signature that
+    is composed as follows:
+
+        <dev-id>.<ingress-port-number>.<s-tag>.*
+
+    In comparison, the upstream flows is similar, but instead of '*' it has the
+    c-tag (if any).
+
+    TODO: Drop device ID from signatures once flow tables are unique to a device handler
+    """
+    def __init__(self):
+        self._signature_table = dict()  # Key = (str)Downstream signature
+                                        #  |
+                                        #  +-> downstream-signature
+                                        #      |
+                                        #      +-> 'evc' -> EVC
+                                        #      |
+                                        #      +-> flow-ids -> flow-entries...
+
+    def __getitem__(self, signature):
+        assert isinstance(signature, str)
+        return self._signature_table[signature]
+
+    def __iter__(self):
+        for _flow_id, _flow in self._signature_table.items():
+            yield _flow_id, _flow
+
+    def itervalues(self):
+        for _flow in self._signature_table.values():
+            yield _flow
+
+    def iterkeys(self):
+        for _id in self._signature_table.keys():
+            yield _id
+
+    def items(self):
+        return self._signature_table.items()
+
+    def values(self):
+        return self._signature_table.values()
+
+    def keys(self):
+        return self._signature_table.keys()
+
+    def __len__(self):
+        return len(self._signature_table)
+
+    def get(self, signature):
+        assert isinstance(signature, str)
+        return self._signature_table.get(signature)
+
+    def add(self, signature):
+        assert isinstance(signature, str)
+        """
+        Can be called by upstream flow to reserve a slot
+        """
+        if signature not in self._signature_table:
+            self._signature_table[signature] = DownstreamFlows.SignatureTableEntry(signature)
+        return self._signature_table[signature]
+
+    def remove(self, signature):
+        assert isinstance(signature, str)
+        return self._signature_table.pop(signature)
+
+    def clear_all(self):
+        self._signature_table = dict()
+
+    class SignatureTableEntry(object):
+        def __init__(self, signature):
+            self._signature = signature
+            self._evc = None
+            self._flow_table = DeviceFlows()
+
+        @property
+        def evc(self):
+            return self._evc
+
+        @evc.setter
+        def evc(self, evc):
+            assert isinstance(evc, (EVC, type(None)))
+            self._evc = evc
+
+        @property
+        def flows(self):
+            return self._flow_table
diff --git a/adapters/adtran_common/flow/mcast.py b/adapters/adtran_common/flow/mcast.py
new file mode 100644
index 0000000..54bf24f
--- /dev/null
+++ b/adapters/adtran_common/flow/mcast.py
@@ -0,0 +1,183 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from pyvoltha.common.openflow.utils import *
+from evc import EVC
+from flow_entry import FlowEntry
+from twisted.internet import defer
+from twisted.internet.defer import returnValue, inlineCallbacks
+
+log = structlog.get_logger()
+
+EVC_NAME_FORMAT = 'VOLTHA-MCAST-{}'                      # format(flow.vlan_id)
+EVC_NAME_REGEX_ALL = EVC_NAME_FORMAT.format('*')
+
+
+_mcast_evcs = {}  # device-id -> flow dictionary
+                  #                  |
+                  #                  +-> vlan-id -> evcs
+
+
+class MCastEVC(EVC):
+    """
+    Class to wrap Multicast EVC and EVC-MAP functionality
+    """
+    def __init__(self, flow_entry):
+        super(MCastEVC, self).__init__(flow_entry)
+        self._downstream_flows = {flow_entry.flow_id}     # Matching Downstream Flow IDs
+
+    def __str__(self):
+        return "MCAST-{}: MEN: {}, VLAN: {}".format(self._name, self._men_ports, self._s_tag)
+
+    def _create_name(self):
+        #
+        # TODO: Take into account selection criteria and output to make the name
+        #
+        return EVC_NAME_FORMAT.format(self._flow.vlan_id)
+
+    def _create_evc_map(self, flow_entry):
+        from evc_map import EVCMap
+        flow = FakeUpstreamFlow(flow_entry.flow, flow_entry.handler)
+        return EVCMap.create_ingress_map(flow, self)
+
+    @staticmethod
+    def create(flow_entry):
+        from evc_map import EVCMap
+
+        device_id = flow_entry.device_id
+        if device_id not in _mcast_evcs:
+            _mcast_evcs[device_id] = {}
+
+        evc_table = _mcast_evcs[device_id]
+
+        try:
+            evc = evc_table.get(flow_entry.vlan_id)
+
+            if evc is None:
+                # Create EVC and initial EVC Map
+                evc = MCastEVC(flow_entry)
+                evc_table[flow_entry.vlan_id] = evc
+            else:
+                if flow_entry.flow_id in evc.downstream_flows:       # TODO: Debug only to see if flow_ids are unique
+                    pass
+                else:
+                    evc.add_downstream_flows(flow_entry.flow_id)
+
+            fake_flow = FakeUpstreamFlow(flow_entry.flow, flow_entry.handler)
+            evc_map_name = EVCMap.create_evc_map_name(fake_flow)
+
+            if evc_map_name not in evc.evc_map_names:
+                EVCMap.create_ingress_map(fake_flow, evc)
+
+            return evc
+
+        except Exception as e:
+            log.exception('mcast-create', e=e)
+            return None
+
+    @property
+    def flow_entry(self):
+        return self._flow
+
+    @property
+    def downstream_flows(self):
+        return frozenset(self._downstream_flows)
+
+    def add_downstream_flows(self, flow_id):
+        self._downstream_flows.add(flow_id)
+
+    def remove_downstream_flows(self, flow_id):
+        self._downstream_flows.discard(flow_id)
+
+    @inlineCallbacks
+    def remove(self, remove_maps=True):
+        """
+        Remove EVC (and optional associated EVC-MAPs) from hardware
+        :param remove_maps: (boolean)
+        :return: (deferred)
+        """
+        log.info('removing', evc=self, remove_maps=remove_maps)
+
+        device_id = self._handler.device_id
+        flow_id = self._flow.id
+        evc_table = _mcast_evcs.get(device_id)
+
+        if evc_table is None or flow_id not in evc_table:
+            returnValue('NOP')
+
+        # Remove flow reference
+        if self._flow.flow_id in self._downstream_flows:
+            del self._downstream_flows[self._flow.flow_id]
+
+        if len(self._downstream_flows) == 0:
+            # Use base class to clean up
+            returnValue(super(MCastEVC, self).remove(remove_maps=True))
+
+        returnValue('More references')
+
+    @inlineCallbacks
+    def delete(self, delete_maps=True):
+        """
+        Remove from hardware and delete/clean-up EVC Object
+        """
+        log.info('deleting', evc=self, delete_maps=delete_maps)
+
+        try:
+            dl = [self.remove()]
+            if delete_maps:
+                for evc_map in self.evc_maps:
+                    dl.append(evc_map.delete(self))   # TODO: implement bulk-flow procedures
+
+            yield defer.gatherResults(dl, consumeErrors=True)
+
+        except Exception as e:
+            log.exception('removal', e=e)
+
+        self._evc_maps = None
+        f, self._flow = self._flow, None
+        if f is not None and f.handler is not None:
+            f.handler.remove_evc(self)
+
+    def reflow(self, reflow_maps=True):
+        pass    # TODO: Implement or use base class?
+
+    @staticmethod
+    def remove_all(client, regex_=EVC_NAME_REGEX_ALL):
+        """
+        Remove all matching EVCs from hardware
+        :param client: (ncclient) NETCONF Client to use
+        :param regex_: (String) Regular expression for name matching
+        :return: (deferred)
+        """
+        pass    # TODO: ???
+
+
+class FakeUpstreamFlow(FlowEntry):
+    def __init__(self, flow, handler):
+        super(FakeUpstreamFlow, self).__init__(flow, handler)
+        self._decode()
+        # Change name that the base class set
+        self._name = self.create_flow_name()
+        self._flow_direction = FlowEntry.FlowDirection.UPSTREAM
+        self.in_port, self.output = self.output, self.in_port
+        self.flow_id = '{}-MCAST'.format(self.vlan_id)
+        self._logical_port = self.vlan_id
+        self.push_vlan_id = self.vlan_id
+        self.vlan_id = None
+        self.signature = None
+        self.inner_vid = None
+        self.pop_vlan = False
+
+    def create_flow_name(self):
+        return 'flow-{}-{}-MCAST'.format(self.device_id, self.vlan_id)
diff --git a/adapters/adtran_common/flow/utility_evc.py b/adapters/adtran_common/flow/utility_evc.py
new file mode 100644
index 0000000..fc7fd0b
--- /dev/null
+++ b/adapters/adtran_common/flow/utility_evc.py
@@ -0,0 +1,158 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from pyvoltha.common.openflow.utils import *
+from evc import EVC
+from twisted.internet import defer
+from twisted.internet.defer import returnValue, inlineCallbacks
+
+log = structlog.get_logger()
+
+EVC_NAME_FORMAT = 'VOLTHA-UTILITY-{}'                   # format(flow.vlan_id)
+EVC_NAME_REGEX_ALL = EVC_NAME_FORMAT.format('*')
+
+
+_utility_evcs = {}  # device-id -> flow dictionary
+                    #                  |
+                    #                  +-> utility-vlan-id -> evcs
+
+
+class UtilityEVC(EVC):
+    """
+    Class to wrap orphan ingress ACLs EVC functionality
+    """
+    def __init__(self, flow_entry):
+        super(UtilityEVC, self).__init__(flow_entry)
+        self._downstream_flows = {flow_entry.flow_id}     # Matching Downstream Flow IDs
+        self.service_evc = True
+
+    def __str__(self):
+        return "VOLTHA-UTILITY-{}: MEN: {}, VLAN: {}".format(self._name, self._men_ports, self._s_tag)
+
+    def _create_name(self, vlan_id=None):
+        #
+        # TODO: Take into account selection criteria and output to make the name
+        #
+        return EVC_NAME_FORMAT.format(self._flow.vlan_id if vlan_id is None else vlan_id)
+
+    @staticmethod
+    def create(flow_entry, use_default_vlan_id=False):
+        device_id = flow_entry.device_id
+        vlan_id = flow_entry.vlan_id if not use_default_vlan_id else flow_entry.handler.utility_vlan
+        evc_table = _utility_evcs.get(device_id)
+
+        if evc_table is None:
+            _utility_evcs[device_id] = dict()
+            evc_table = _utility_evcs[device_id]
+
+        try:
+            evc = evc_table.get(vlan_id)
+
+            if evc is None:
+                # Create EVC and initial EVC Map
+                evc = UtilityEVC(flow_entry)
+
+                # reapply the stag and name if forced vlan id
+                if use_default_vlan_id:
+                    evc._s_tag = vlan_id
+                    evc._name = evc._create_name(vlan_id)
+
+                evc_table[vlan_id] = evc
+            else:
+                if flow_entry.flow_id in evc.downstream_flows:    # TODO: Debug only to see if flow_ids are unique
+                    pass
+                else:
+                    evc.add_downstream_flows(flow_entry.flow_id)
+
+            return evc
+
+        except Exception as e:
+            log.exception('utility-create', e=e)
+            return None
+
+    @property
+    def downstream_flows(self):
+        return frozenset(self._downstream_flows)
+
+    def add_downstream_flows(self, flow_id):
+        self._downstream_flows.add(flow_id)
+
+    def remove_downstream_flows(self, flow_id):
+        self._downstream_flows.discard(flow_id)
+
+    def remove(self, remove_maps=True):
+        """
+        Remove EVC (and optional associated EVC-MAPs) from hardware
+        :param remove_maps: (boolean)
+        :return: (deferred)
+        """
+        log.info('removing', evc=self, remove_maps=remove_maps)
+
+        device_id = self._flow.handler.device_id
+        flow_id = self._flow.flow_id
+        evc_table = _utility_evcs.get(device_id)
+
+        if evc_table is None:
+            return defer.succeed('NOP')
+
+        # Remove flow reference
+        if self._flow.flow_id in self._downstream_flows:
+            self._downstream_flows.discard(self._flow.flow_id)
+
+        if len(self._downstream_flows) == 0:
+            # Use base class to clean up
+            return super(UtilityEVC, self).remove(remove_maps=True)
+
+        return defer.succeed('More references')
+
+    @inlineCallbacks
+    def delete(self, delete_maps=True):
+        """
+        Remove from hardware and delete/clean-up EVC Object
+        :return: (deferred)
+        """
+        log.info('deleting', evc=self, delete_maps=delete_maps)
+
+        assert self._flow, 'Delete EVC must have flow reference'
+        try:
+            dl = [self.remove()]
+            if delete_maps:
+                for evc_map in self.evc_maps:
+                    dl.append(evc_map.delete(None))   # TODO: implement bulk-flow procedures
+
+            yield defer.gatherResults(dl, consumeErrors=True)
+
+            self._evc_maps = None
+            f, self._flow = self._flow, None
+            if f is not None and f.handler is not None:
+                f.handler.remove_evc(self)
+
+        except Exception as e:
+            log.exception('removal', e=e)
+
+        returnValue('Done')
+
+    def reflow(self, reflow_maps=True):
+        pass    # TODO: Implement or use base class?
+
+    @staticmethod
+    def remove_all(client, regex_=EVC_NAME_REGEX_ALL):
+        """
+        Remove all matching EVCs from hardware
+        :param client: (ncclient) NETCONF Client to use
+        :param regex_: (String) Regular expression for name matching
+        :return: (deferred)
+        """
+        _utility_evcs.clear()
+        EVC.remove_all(client, regex_)
\ No newline at end of file
diff --git a/adapters/adtran_common/net/__init__.py b/adapters/adtran_common/net/__init__.py
new file mode 100644
index 0000000..d67fcf2
--- /dev/null
+++ b/adapters/adtran_common/net/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present ADTRAN, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_common/net/adtran_netconf.py b/adapters/adtran_common/net/adtran_netconf.py
new file mode 100644
index 0000000..4e39a6a
--- /dev/null
+++ b/adapters/adtran_common/net/adtran_netconf.py
@@ -0,0 +1,373 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+from lxml import etree
+from ncclient import manager
+from ncclient.operations import RPCError
+from ncclient.transport.errors import SSHError
+from twisted.internet import defer, threads
+from twisted.internet.defer import inlineCallbacks, returnValue
+
+log = structlog.get_logger('ncclient')
+
+ADTRAN_NS = 'http://www.adtran.com/ns/yang'
+
+
+def adtran_module_url(module):
+    return '{}/{}'.format(ADTRAN_NS, module)
+
+
+def phys_entities_rpc():
+    return """
+    <filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
+      <physical-entities-state xmlns="{}">
+        <physical-entity/>
+      </physical-entities-state>
+    </filter>
+    """.format(adtran_module_url('adtran-physical-entities'))
+
+
+class AdtranNetconfClient(object):
+    """
+    Performs NETCONF requests
+    """
+    def __init__(self, host_ip, port=830, username='', password='', timeout=10):
+        self._ip = host_ip
+        self._port = port
+        self._username = username
+        self._password = password
+        self._timeout = timeout
+        self._session = None
+
+    def __str__(self):
+        return "AdtranNetconfClient {}@{}:{}".format(self._username, self._ip, self._port)
+
+    @property
+    def capabilities(self):
+        """
+        Get the server's NETCONF capabilities
+
+        :return: (ncclient.capabilities.Capabilities) object representing the server's capabilities.
+        """
+        return self._session.server_capabilities if self._session else None
+
+    @property
+    def connected(self):
+        """
+        Is this client connected to a NETCONF server
+        :return: (boolean) True if connected
+        """
+        return self._session is not None and self._session.connected
+
+    def connect(self, connect_timeout=None):
+        """
+        Connect to the NETCONF server
+
+          o To disable attempting publickey authentication altogether, call with
+            allow_agent and look_for_keys as False.
+
+          o hostkey_verify enables hostkey verification from ~/.ssh/known_hosts
+
+        :return: (deferred) Deferred request
+        """
+        timeout = connect_timeout or self._timeout
+
+        return threads.deferToThread(self._do_connect, timeout)
+
+    def _do_connect(self, timeout):
+        try:
+            self._session = manager.connect(host=self._ip,
+                                            port=self._port,
+                                            username=self._username,
+                                            password=self._password,
+                                            allow_agent=False,
+                                            look_for_keys=False,
+                                            hostkey_verify=False,
+                                            timeout=timeout)
+
+        except SSHError as e:
+            # Log and rethrow exception so any errBack is called
+            log.warn('SSHError-during-connect', e=e)
+            raise e
+
+        except Exception as e:
+            # Log and rethrow exception so any errBack is called
+            log.exception('Connect-failed: {}', e=e)
+            raise e
+
+        # If debug logging is enabled, decrease the level, DEBUG is a significant
+        # performance hit during response XML decode
+
+        if log.isEnabledFor('DEBUG'):
+            log.setLevel('INFO')
+
+        # TODO: ncclient also supports RaiseMode:NONE to limit exceptions.  To set use:
+        #
+        #  self._session.raise_mode = RaiseMode:NONE
+        #
+        # and the when you get a response back, you can check   'response.ok' to
+        # see if it is 'True' if it is not, you can enumerate the 'response.errors'
+        # list for more information
+
+        return self._session
+
+    def close(self):
+        """
+        Close the connection to the NETCONF server
+        :return:  (deferred) Deferred request
+        """
+        s, self._session = self._session, None
+
+        if s is None or not s.connected:
+            return defer.returnValue(True)
+
+        return threads.deferToThread(self._do_close, s)
+
+    def _do_close(self, old_session):
+        return old_session.close_session()
+
+    @inlineCallbacks
+    def _reconnect(self):
+        try:
+            yield self.close()
+        except:
+            pass
+
+        try:
+            yield self.connect()
+        except:
+            pass
+
+    def get_config(self, source='running'):
+        """
+        Get the configuration from the specified source
+
+        :param source: (string) Configuration source, 'running', 'candidate', ...
+
+        :return: (deferred) Deferred request that wraps the GetReply class
+        """
+        if not self._session:
+            raise NotImplemented('No SSH Session')
+
+        if not self._session.connected:
+            self._reconnect()
+
+        return threads.deferToThread(self._do_get_config, source)
+
+    def _do_get_config(self, source):
+        """
+        Get the configuration from the specified source
+
+        :param source: (string) Configuration source, 'running', 'candidate', ...
+
+        :return: (GetReply) The configuration.
+        """
+        return self._session.get_config(source)
+
+    def get(self, payload):
+        """
+        Get the requested data from the server
+
+        :param payload: Payload/filter
+        :return: (deferred) for GetReply
+        """
+        log.debug('get', filter=payload)
+
+        if not self._session:
+            raise NotImplemented('No SSH Session')
+
+        if not self._session.connected:
+            self._reconnect()
+
+        return threads.deferToThread(self._do_get, payload)
+
+    def _do_get(self, payload):
+        """
+        Get the requested data from the server
+
+        :param payload: Payload/filter
+        :return: (GetReply) response
+        """
+        try:
+            log.debug('get', payload=payload)
+            response = self._session.get(payload)
+            # To get XML, use response.xml
+            log.debug('response', response=response)
+
+        except RPCError as e:
+            log.exception('get', e=e)
+            raise
+
+        return response
+
+    def lock(self, source, lock_timeout):
+        """
+        Lock the configuration system
+        :return: (deferred) for RpcReply
+        """
+        log.info('lock', source=source, timeout=lock_timeout)
+
+        if not self._session or not self._session.connected:
+            raise NotImplemented('TODO: Support auto-connect if needed')
+
+        return threads.deferToThread(self._do_lock, source, lock_timeout)
+
+    def _do_lock(self, source, lock_timeout):
+        """
+        Lock the configuration system
+        """
+        try:
+            response = self._session.lock(source, timeout=lock_timeout)
+            # To get XML, use response.xml
+
+        except RPCError as e:
+            log.exception('lock', e=e)
+            raise
+
+        return response
+
+    def unlock(self, source):
+        """
+        Get the requested data from the server
+        :param source: RPC request
+
+        :return: (deferred) for RpcReply
+        """
+        log.info('unlock', source=source)
+
+        if not self._session or not self._session.connected:
+            raise NotImplemented('TODO: Support auto-connect if needed')
+
+        return threads.deferToThread(self._do_unlock, source)
+
+    def _do_unlock(self, source):
+        """
+        Lock the configuration system
+        """
+        try:
+            response = self._session.unlock(source)
+            # To get XML, use response.xml
+
+        except RPCError as e:
+            log.exception('unlock', e=e)
+            raise
+
+        return response
+
+    @inlineCallbacks
+    def edit_config(self, config, target='running', default_operation='none',
+                    test_option=None, error_option=None, ignore_delete_error=False):
+        """
+        Loads all or part of the specified config to the target configuration datastore
+        with the ability to lock the datastore during the edit.
+
+        :param config is the configuration, which must be rooted in the config element.
+                      It can be specified either as a string or an Element.format="xml"
+        :param target is the name of the configuration datastore being edited
+        :param default_operation if specified must be one of { 'merge', 'replace', or 'none' }
+        :param test_option if specified must be one of { 'test_then_set', 'set' }
+        :param error_option if specified must be one of { 'stop-on-error',
+                            'continue-on-error', 'rollback-on-error' } The
+                            'rollback-on-error' error_option depends on the
+                            :rollback-on-error capability.
+        :param ignore_delete_error: (bool) For some startup deletes/clean-ups, we do a
+                                    delete high up in the config to get whole lists. If
+                                    these lists are empty, this helps suppress any error
+                                    message from NETConf on failure to delete an empty list
+
+        :return: (deferred) for RpcReply
+        """
+        if not self._session:
+            raise NotImplemented('No SSH Session')
+
+        if not self._session.connected:
+            try:
+                yield self._reconnect()
+
+            except Exception as e:
+                log.exception('edit-config-connect', e=e)
+
+        try:
+            if config[:7] != '<config':
+                config = '<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0"' + \
+                         ' xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">' + \
+                         config + '</config>'
+
+            log.debug('netconf-request', config=config, target=target,
+                      default_operation=default_operation)
+
+            rpc_reply = yield threads.deferToThread(self._do_edit_config, target,
+                                                    config, default_operation,
+                                                    test_option, error_option)
+        except Exception as e:
+            if ignore_delete_error and 'operation="delete"' in config.lower():
+                returnValue('ignoring-delete-error')
+            log.exception('edit_config', e=e, config=config, target=target)
+            raise
+
+        returnValue(rpc_reply)
+
+    def _do_edit_config(self, target, config, default_operation, test_option, error_option,
+                        ignore_delete_error=False):
+        """
+        Perform actual edit-config operation
+        """
+        try:
+            log.debug('edit-config', target=target, config=config)
+            
+            response = self._session.edit_config(target=target, config=config
+                                                 # TODO: Support additional options later
+                                                 # ,default_operation=default_operation,
+                                                 # test_option=test_option,
+                                                 # error_option=error_option
+                                                 )
+
+            log.debug('netconf-response', response=response)
+            # To get XML, use response.xml
+            # To check status, use response.ok  (boolean)
+
+        except RPCError as e:
+            if not ignore_delete_error or 'operation="delete"' not in config.lower():
+                log.exception('do_edit_config', e=e, config=config, target=target)
+            raise
+
+        return response
+
+    def rpc(self, rpc_string):
+        """
+        Custom RPC request
+        :param rpc_string: (string) RPC request
+        :return: (deferred) for GetReply
+        """
+        log.debug('rpc', rpc=rpc_string)
+
+        if not self._session:
+            raise NotImplemented('No SSH Session')
+
+        if not self._session.connected:
+            self._reconnect()
+
+        return threads.deferToThread(self._do_rpc, rpc_string)
+
+    def _do_rpc(self, rpc_string):
+        try:
+            response = self._session.dispatch(etree.fromstring(rpc_string))
+            # To get XML, use response.xml
+
+        except RPCError as e:
+            log.exception('rpc', e=e)
+            raise
+
+        return response
diff --git a/adapters/adtran_common/net/adtran_rest.py b/adapters/adtran_common/net/adtran_rest.py
new file mode 100644
index 0000000..9020e82
--- /dev/null
+++ b/adapters/adtran_common/net/adtran_rest.py
@@ -0,0 +1,189 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+
+import structlog
+import treq
+from twisted.internet.defer import inlineCallbacks, returnValue
+from twisted.internet.error import ConnectionClosed, ConnectionDone, ConnectionLost
+
+log = structlog.get_logger()
+
+
+class RestInvalidResponseCode(Exception):
+    def __init__(self, message, url, code):
+        super(RestInvalidResponseCode, self).__init__(message)
+        self.url = url
+        self.code = code
+
+
+class AdtranRestClient(object):
+    """
+    Performs Adtran RESTCONF requests
+    """
+    # HTTP shortcuts
+    HELLO_URI = '/restconf/adtran-hello:hello'
+
+    REST_GET_REQUEST_HEADER = {'User-Agent': 'Adtran RESTConf',
+                               'Accept': ['application/json']}
+
+    REST_POST_REQUEST_HEADER = {'User-Agent': 'Adtran RESTConf',
+                                'Content-Type': 'application/json',
+                                'Accept': ['application/json']}
+
+    REST_PATCH_REQUEST_HEADER = REST_POST_REQUEST_HEADER
+    REST_PUT_REQUEST_HEADER = REST_POST_REQUEST_HEADER
+    REST_DELETE_REQUEST_HEADER = REST_GET_REQUEST_HEADER
+
+    HTTP_OK = 200
+    HTTP_CREATED = 201
+    HTTP_ACCEPTED = 202
+    HTTP_NON_AUTHORITATIVE_INFORMATION = 203
+    HTTP_NO_CONTENT = 204
+    HTTP_RESET_CONTENT = 205
+    HTTP_PARTIAL_CONTENT = 206
+    HTTP_NOT_FOUND = 404
+
+    _valid_methods = {'GET', 'POST', 'PATCH', 'DELETE'}
+    _valid_results = {'GET': [HTTP_OK, HTTP_NO_CONTENT],
+                      'POST': [HTTP_OK, HTTP_CREATED, HTTP_NO_CONTENT],
+                      'PUT': [HTTP_OK, HTTP_CREATED, HTTP_NO_CONTENT],
+                      'PATCH': [HTTP_OK],
+                      'DELETE': [HTTP_OK, HTTP_ACCEPTED, HTTP_NO_CONTENT, HTTP_NOT_FOUND]
+                      }
+
+    for _method in _valid_methods:
+        assert _method in _valid_results  # Make sure we have a results entry for each supported method
+
+    def __init__(self, host_ip, port, username='', password='', timeout=10):
+        """
+        REST Client initialization
+
+        :param host_ip: (string) IP Address of Adtran Device
+        :param port: (int) Port number
+        :param username: (string) Username for credentials
+        :param password: (string) Password for credentials
+        :param timeout: (int) Number of seconds to wait for a response before timing out
+        """
+        self._ip = host_ip
+        self._port = port
+        self._username = username
+        self._password = password
+        self._timeout = timeout
+
+    def __str__(self):
+        return "AdtranRestClient {}@{}:{}".format(self._username, self._ip, self._port)
+
+    @inlineCallbacks
+    def request(self, method, uri, data=None, name='', timeout=None, is_retry=False,
+                suppress_error=False):
+        """
+        Send a REST request to the Adtran device
+
+        :param method: (string) HTTP method
+        :param uri: (string) fully URL to perform method on
+        :param data: (string) optional data for the request body
+        :param name: (string) optional name of the request, useful for logging purposes
+        :param timeout: (int) Number of seconds to wait for a response before timing out
+        :param is_retry: (boolean) True if this method called recursively in order to recover
+                                   from a connection loss. Can happen sometimes in debug sessions
+                                   and in the real world.
+        :param suppress_error: (boolean) If true, do not output ERROR message on REST request failure
+        :return: (dict) On success with the proper results
+        """
+        log.debug('request', method=method, uri=uri, data=data, retry=is_retry)
+
+        if method.upper() not in self._valid_methods:
+            raise NotImplementedError("REST method '{}' is not supported".format(method))
+
+        url = 'http://{}:{}{}{}'.format(self._ip, self._port,
+                                        '/' if uri[0] != '/' else '',
+                                        uri)
+        response = None
+        timeout = timeout or self._timeout
+
+        try:
+            if method.upper() == 'GET':
+                response = yield treq.get(url,
+                                          auth=(self._username, self._password),
+                                          timeout=timeout,
+                                          headers=self.REST_GET_REQUEST_HEADER)
+            elif method.upper() == 'POST' or method.upper() == 'PUT':
+                response = yield treq.post(url,
+                                           data=data,
+                                           auth=(self._username, self._password),
+                                           timeout=timeout,
+                                           headers=self.REST_POST_REQUEST_HEADER)
+            elif method.upper() == 'PATCH':
+                response = yield treq.patch(url,
+                                            data=data,
+                                            auth=(self._username, self._password),
+                                            timeout=timeout,
+                                            headers=self.REST_PATCH_REQUEST_HEADER)
+            elif method.upper() == 'DELETE':
+                response = yield treq.delete(url,
+                                             auth=(self._username, self._password),
+                                             timeout=timeout,
+                                             headers=self.REST_DELETE_REQUEST_HEADER)
+            else:
+                raise NotImplementedError("REST method '{}' is not supported".format(method))
+
+        except NotImplementedError:
+            raise
+
+        except (ConnectionDone, ConnectionLost) as e:
+            if is_retry:
+                raise
+            returnValue(self.request(method, uri, data=data, name=name,
+                                     timeout=timeout, is_retry=True))
+
+        except ConnectionClosed:
+            returnValue(ConnectionClosed)
+
+        except Exception as e:
+            log.exception("rest-request", method=method, url=url, name=name, e=e)
+            raise
+
+        if response.code not in self._valid_results[method.upper()]:
+            message = "REST {} '{}' request to '{}' failed with status code {}".format(method, name,
+                                                                                       url, response.code)
+            if not suppress_error:
+                log.error(message)
+            raise RestInvalidResponseCode(message, url, response.code)
+
+        if response.code in {self.HTTP_NO_CONTENT, self.HTTP_NOT_FOUND}:
+            returnValue(None)
+
+        else:
+            # TODO: May want to support multiple body encodings in the future
+
+            headers = response.headers
+            type_key = 'content-type'
+            type_val = 'application/json'
+
+            if not headers.hasHeader(type_key) or type_val not in headers.getRawHeaders(type_key, []):
+                raise Exception("REST {} '{}' request response from '{}' was not JSON",
+                                method, name, url)
+
+            content = yield response.content()
+            try:
+                result = json.loads(content)
+
+            except Exception as e:
+                log.exception("json-decode", method=method, url=url, name=name,
+                              content=content, e=e)
+                raise
+
+            returnValue(result)
diff --git a/adapters/adtran_common/net/adtran_zmq.py b/adapters/adtran_common/net/adtran_zmq.py
new file mode 100644
index 0000000..1d1341c
--- /dev/null
+++ b/adapters/adtran_common/net/adtran_zmq.py
@@ -0,0 +1,379 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import sys
+import structlog
+
+from twisted.internet.defer import succeed
+from twisted.internet import threads
+
+from txzmq import ZmqEndpoint, ZmqFactory
+from txzmq.connection import ZmqConnection
+
+import zmq
+from zmq import constants
+from zmq.utils import jsonapi
+from zmq.utils.strtypes import b, u
+from zmq.auth.base import Authenticator
+
+from threading import Thread, Event
+
+zmq_factory = ZmqFactory()
+
+
+class AdtranZmqClient(object):
+    """
+    Adtran ZeroMQ Client for PON Agent and/or packet in/out service
+    """
+    def __init__(self, ip_address, rx_callback, port):
+        self.log = structlog.get_logger()
+
+        external_conn = 'tcp://{}:{}'.format(ip_address, port)
+
+        self.zmq_endpoint = ZmqEndpoint('connect', external_conn)
+        self._socket = ZmqPairConnection(zmq_factory, self.zmq_endpoint)
+        self._socket.onReceive = rx_callback or AdtranZmqClient.rx_nop
+        self.auth = None
+
+    def send(self, data):
+        try:
+            self._socket.send(data)
+
+        except Exception as e:
+            self.log.exception('send', e=e)
+
+    def shutdown(self):
+        self._socket.onReceive = AdtranZmqClient.rx_nop
+        self._socket.shutdown()
+
+    @property
+    def socket(self):
+        return self._socket
+
+    @staticmethod
+    def rx_nop(_):
+        pass
+
+    def setup_plain_security(self, username, password):
+        self.log.debug('setup-plain-security')
+
+        def configure_plain(_):
+            self.log.debug('plain-security', username=username,
+                           password=password)
+
+            self.auth.configure_plain(domain='*', passwords={username: password})
+            self._socket.socket.plain_username = username
+            self._socket.socket.plain_password = password
+
+        def add_endoints(_results):
+            self._socket.addEndpoints([self.zmq_endpoint])
+
+        def config_failure(_results):
+            raise Exception('Failed to configure plain-text security')
+
+        def endpoint_failure(_results):
+            raise Exception('Failed to complete endpoint setup')
+
+        self.auth = TwistedZmqAuthenticator()
+
+        d = self.auth.start()
+        d.addCallbacks(configure_plain, config_failure)
+        d.addCallbacks(add_endoints, endpoint_failure)
+
+        return d
+
+    def setup_curve_security(self):
+        self.log.debug('setup-curve-security')
+        raise NotImplementedError('TODO: curve transport security is not yet supported')
+
+
+class ZmqPairConnection(ZmqConnection):
+    """
+    Bidirectional messages to/from the socket.
+
+    Wrapper around ZeroMQ PUSH socket.
+    """
+    socketType = constants.PAIR
+
+    def messageReceived(self, message):
+        """
+        Called on incoming message from ZeroMQ.
+
+        :param message: message data
+        """
+        self.onReceive(message)
+
+    def onReceive(self, message):
+        """
+        Called on incoming message received from other end of the pair.
+
+        :param message: message data
+        """
+        raise NotImplementedError(self)
+
+    def send(self, message):
+        """
+        Send message via ZeroMQ socket.
+
+        Sending is performed directly to ZeroMQ without queueing. If HWM is
+        reached on ZeroMQ side, sending operation is aborted with exception
+        from ZeroMQ (EAGAIN).
+
+        After writing read is scheduled as ZeroMQ may not signal incoming
+        messages after we touched socket with write request.
+
+        :param message: message data, could be either list of str (multipart
+            message) or just str
+        :type message: str or list of str
+        """
+        from txzmq.compat import is_nonstr_iter
+        from twisted.internet import reactor
+
+        if not is_nonstr_iter(message):
+            self.socket.send(message, constants.NOBLOCK)
+        else:
+            # for m in message[:-1]:
+            #     self.socket.send(m, constants.NOBLOCK | constants.SNDMORE)
+            # self.socket.send(message[-1], constants.NOBLOCK)
+            self.socket.send_multipart(message, flags=constants.NOBLOCK)
+
+        if self.read_scheduled is None:
+            self.read_scheduled = reactor.callLater(0, self.doRead)
+
+###############################################################################################
+###############################################################################################
+###############################################################################################
+###############################################################################################
+
+
+def _inherit_docstrings(cls):
+    """inherit docstrings from Authenticator, so we don't duplicate them"""
+    for name, method in cls.__dict__.items():
+        if name.startswith('_'):
+            continue
+        upstream_method = getattr(Authenticator, name, None)
+        if not method.__doc__:
+            method.__doc__ = upstream_method.__doc__
+    return cls
+
+
+@_inherit_docstrings
+class TwistedZmqAuthenticator(object):
+    """Run ZAP authentication in a background thread but communicate via Twisted ZMQ"""
+
+    def __init__(self, encoding='utf-8'):
+        self.log = structlog.get_logger()
+        self.context = zmq_factory.context
+        self.encoding = encoding
+        self.pipe = None
+        self.pipe_endpoint = "inproc://{0}.inproc".format(id(self))
+        self.thread = None
+
+    def allow(self, *addresses):
+        try:
+            self.pipe.send([b'ALLOW'] + [b(a, self.encoding) for a in addresses])
+
+        except Exception as e:
+            self.log.exception('allow', e=e)
+
+    def deny(self, *addresses):
+        try:
+            self.pipe.send([b'DENY'] + [b(a, self.encoding) for a in addresses])
+
+        except Exception as e:
+            self.log.exception('deny', e=e)
+
+    def configure_plain(self, domain='*', passwords=None):
+        try:
+            self.pipe.send([b'PLAIN', b(domain, self.encoding), jsonapi.dumps(passwords or {})])
+
+        except Exception as e:
+            self.log.exception('configure-plain', e=e)
+
+    def configure_curve(self, domain='*', location=''):
+        try:
+            domain = b(domain, self.encoding)
+            location = b(location, self.encoding)
+            self.pipe.send([b'CURVE', domain, location])
+
+        except Exception as e:
+            self.log.exception('configure-curve', e=e)
+
+    def start(self, rx_callback=AdtranZmqClient.rx_nop):
+        """Start the authentication thread"""
+        try:
+            # create a socket to communicate with auth thread.
+
+            endpoint = ZmqEndpoint('bind', self.pipe_endpoint)      # We are server, thread will be client
+            self.pipe = ZmqPairConnection(zmq_factory, endpoint)
+            self.pipe.onReceive = rx_callback
+
+            self.thread = LocalAuthenticationThread(self.context,
+                                                    self.pipe_endpoint,
+                                                    encoding=self.encoding)
+
+            return threads.deferToThread(TwistedZmqAuthenticator._do_thread_start,
+                                         self.thread, timeout=10)
+
+        except Exception as e:
+            self.log.exception('start', e=e)
+
+    @staticmethod
+    def _do_thread_start(thread, timeout=10):
+        thread.start()
+
+        # Event.wait:Changed in version 2.7: Previously, the method always returned None.
+        if sys.version_info < (2, 7):
+            thread.started.wait(timeout=timeout)
+
+        elif not thread.started.wait(timeout=timeout):
+            raise RuntimeError("Authenticator thread failed to start")
+
+    def stop(self):
+        """Stop the authentication thread"""
+        pipe, self.pipe = self.pipe, None
+        thread, self.thread = self.thread, None
+
+        if pipe:
+            pipe.send(b'TERMINATE')
+            pipe.onReceive = AdtranZmqClient.rx_nop
+            pipe.shutdown()
+
+            if thread.is_alive():
+                return threads.deferToThread(TwistedZmqAuthenticator._do_thread_join,
+                                             thread)
+        return succeed('done')
+
+    @staticmethod
+    def _do_thread_join(thread, timeout=1):
+        thread.join(timeout)
+        pass
+
+    def is_alive(self):
+        """Is the ZAP thread currently running?"""
+        return self.thread and self.thread.is_alive()
+
+    def __del__(self):
+        self.stop()
+
+
+# NOTE: Following is a duplicated from zmq code since class was not exported
+class LocalAuthenticationThread(Thread):
+    """A Thread for running a zmq Authenticator
+
+    This is run in the background by ThreadedAuthenticator
+    """
+
+    def __init__(self, context, endpoint, encoding='utf-8', authenticator=None):
+        super(LocalAuthenticationThread, self).__init__(name='0mq Authenticator')
+        self.log = structlog.get_logger()
+        self.context = context or zmq.Context.instance()
+        self.encoding = encoding
+        self.started = Event()
+        self.authenticator = authenticator or Authenticator(context, encoding=encoding)
+
+        # create a socket to communicate back to main thread.
+        self.pipe = context.socket(zmq.PAIR)
+        self.pipe.linger = 1
+        self.pipe.connect(endpoint)
+
+    def run(self):
+        """Start the Authentication Agent thread task"""
+        try:
+            self.authenticator.start()
+            self.started.set()
+            zap = self.authenticator.zap_socket
+            poller = zmq.Poller()
+            poller.register(self.pipe, zmq.POLLIN)
+            poller.register(zap, zmq.POLLIN)
+            while True:
+                try:
+                    socks = dict(poller.poll())
+                except zmq.ZMQError:
+                    break  # interrupted
+
+                if self.pipe in socks and socks[self.pipe] == zmq.POLLIN:
+                    terminate = self._handle_pipe()
+                    if terminate:
+                        break
+
+                if zap in socks and socks[zap] == zmq.POLLIN:
+                    self._handle_zap()
+
+            self.pipe.close()
+            self.authenticator.stop()
+
+        except Exception as e:
+            self.log.exception("run", e=e)
+
+    def _handle_zap(self):
+        """
+        Handle a message from the ZAP socket.
+        """
+        msg = self.authenticator.zap_socket.recv_multipart()
+        if not msg:
+            return
+        self.authenticator.handle_zap_message(msg)
+
+    def _handle_pipe(self):
+        """
+        Handle a message from front-end API.
+        """
+        terminate = False
+
+        # Get the whole message off the pipe in one go
+        msg = self.pipe.recv_multipart()
+
+        if msg is None:
+            terminate = True
+            return terminate
+
+        command = msg[0]
+        self.log.debug("auth received API command", command=command)
+
+        if command == b'ALLOW':
+            addresses = [u(m, self.encoding) for m in msg[1:]]
+            try:
+                self.authenticator.allow(*addresses)
+            except Exception as e:
+                self.log.exception("Failed to allow", addresses=addresses, e=e)
+
+        elif command == b'DENY':
+            addresses = [u(m, self.encoding) for m in msg[1:]]
+            try:
+                self.authenticator.deny(*addresses)
+            except Exception as e:
+                self.log.exception("Failed to deny", addresses=addresses, e=e)
+
+        elif command == b'PLAIN':
+            domain = u(msg[1], self.encoding)
+            json_passwords = msg[2]
+            self.authenticator.configure_plain(domain, jsonapi.loads(json_passwords))
+
+        elif command == b'CURVE':
+            # For now we don't do anything with domains
+            domain = u(msg[1], self.encoding)
+
+            # If location is CURVE_ALLOW_ANY, allow all clients. Otherwise
+            # treat location as a directory that holds the certificates.
+            location = u(msg[2], self.encoding)
+            self.authenticator.configure_curve(domain, location)
+
+        elif command == b'TERMINATE':
+            terminate = True
+
+        else:
+            self.log.error("Invalid auth command from API", command=command)
+
+        return terminate
diff --git a/adapters/adtran_common/net/mock_netconf_client.py b/adapters/adtran_common/net/mock_netconf_client.py
new file mode 100644
index 0000000..314f2a0
--- /dev/null
+++ b/adapters/adtran_common/net/mock_netconf_client.py
@@ -0,0 +1,199 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+import random
+import time
+from adtran_netconf import AdtranNetconfClient
+from pyvoltha.common.utils.asleep import asleep
+from ncclient.operations.rpc import RPCReply, RPCError
+from twisted.internet.defer import inlineCallbacks, returnValue
+
+log = structlog.get_logger()
+
+_dummy_xml = '<rpc-reply message-id="br-549" ' + \
+      'xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" ' + \
+      'xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">' + \
+      '<data/>' + \
+      '</rpc-reply>'
+
+
+class MockNetconfClient(AdtranNetconfClient):
+    """
+    Performs NETCONF requests
+    """
+    def __init__(self, host_ip, port=830, username='', password='', timeout=20):
+        super(MockNetconfClient, self).__init__(host_ip, port=port, username=username,
+                                                password=password, timeout=timeout)
+        self._connected = False
+        self._locked = {}
+
+    def __str__(self):
+        return "MockNetconfClient {}@{}:{}".format(self._username, self._ip, self._port)
+
+    @property
+    def capabilities(self):
+        """
+        Get the server's NETCONF capabilities
+
+        :return: (ncclient.capabilities.Capabilities) object representing the server's capabilities.
+        """
+        return None
+
+    @property
+    def connected(self):
+        """
+        Is this client connected to a NETCONF server
+        :return: (boolean) True if connected
+        """
+        return self._connected
+
+    @inlineCallbacks
+    def connect(self, connect_timeout=None):
+        """
+        Connect to the NETCONF server
+          o To disable attempting publickey authentication altogether, call with
+            allow_agent and look_for_keys as False.`
+
+          o hostkey_verify enables hostkey verification from ~/.ssh/known_hosts
+
+        :return: (deferred) Deferred request
+        """
+        yield asleep(random.uniform(0.1, 5.0))   # Simulate NETCONF request delay
+        self._connected = True
+        self._locked = {}
+        returnValue(True)
+
+    @inlineCallbacks
+    def close(self):
+        """
+        Close the connection to the NETCONF server
+        :return:  (deferred) Deferred request
+        """
+        yield asleep(random.uniform(0.1, 0.5))   # Simulate NETCONF request delay
+        self._connected = False
+        self._locked = {}
+        returnValue(True)
+
+    @inlineCallbacks
+    def get_config(self, source='running'):
+        """
+        Get the configuration from the specified source
+
+        :param source: (string) Configuration source, 'running', 'candidate', ...
+        :return: (deferred) Deferred request that wraps the GetReply class
+        """
+        yield asleep(random.uniform(0.1, 4.0))   # Simulate NETCONF request delay
+
+        # TODO: Customize if needed...
+        xml = _dummy_xml
+        returnValue(RPCReply(xml))
+
+    @inlineCallbacks
+    def get(self, payload):
+        """
+        Get the requested data from the server
+
+        :param payload: Payload/filter
+        :return: (defeered) for GetReply
+        """
+        yield asleep(random.uniform(0.1, 3.0))   # Simulate NETCONF request delay
+
+        # TODO: Customize if needed...
+        xml = _dummy_xml
+        returnValue(RPCReply(xml))
+
+    @inlineCallbacks
+    def lock(self, source, lock_timeout):
+        """
+        Lock the configuration system
+        :param source: is the name of the configuration datastore accessed
+        :param lock_timeout: timeout in seconds for holding the lock
+        :return: (defeered) for RpcReply
+        """
+        expire_time = time.time() + lock_timeout
+
+        if source not in self._locked:
+            self._locked[source] = None
+
+        while self._locked[source] is not None:
+            # Watch for lock timeout
+            if time.time() >= self._locked[source]:
+                self._locked[source] = None
+                break
+            yield asleep(0.1)
+
+        if time.time() < expire_time:
+            yield asleep(random.uniform(0.1, 0.5))   # Simulate NETCONF request delay
+            self._locked[source] = expire_time
+
+        returnValue(RPCReply(_dummy_xml) if expire_time > time.time() else RPCError('TODO'))
+
+    @inlineCallbacks
+    def unlock(self, source):
+        """
+        Get the requested data from the server
+        :param rpc_string: RPC request
+        :param source: is the name of the configuration datastore accessed
+        :return: (defeered) for RpcReply
+        """
+        if source not in self._locked:
+            self._locked[source] = None
+
+        if self._locked[source] is not None:
+            yield asleep(random.uniform(0.1, 0.5))   # Simulate NETCONF request delay
+
+        self._locked[source] = None
+        returnValue(RPCReply(_dummy_xml))
+
+    @inlineCallbacks
+    def edit_config(self, config, target='running', default_operation='merge',
+                    test_option=None, error_option=None):
+        """
+        Loads all or part of the specified config to the target configuration datastore with the ability to lock
+        the datastore during the edit.
+
+        :param config is the configuration, which must be rooted in the config element. It can be specified
+                      either as a string or an Element.format="xml"
+        :param target is the name of the configuration datastore being edited
+        :param default_operation if specified must be one of { 'merge', 'replace', or 'none' }
+        :param test_option if specified must be one of { 'test_then_set', 'set' }
+        :param error_option if specified must be one of { 'stop-on-error', 'continue-on-error', 'rollback-on-error' }
+                            The 'rollback-on-error' error_option depends on the :rollback-on-error capability.
+
+        :return: (defeered) for RpcReply
+        """
+        try:
+            yield asleep(random.uniform(0.1, 2.0))  # Simulate NETCONF request delay
+
+        except Exception as e:
+            log.exception('edit_config', e=e)
+            raise
+
+        # TODO: Customize if needed...
+        xml = _dummy_xml
+        returnValue(RPCReply(xml))
+
+    @inlineCallbacks
+    def rpc(self, rpc_string):
+        """
+        Custom RPC request
+        :param rpc_string: (string) RPC request
+        :return: (defeered) for GetReply
+        """
+        yield asleep(random.uniform(0.1, 2.0))   # Simulate NETCONF request delay
+
+        # TODO: Customize if needed...
+        xml = _dummy_xml
+        returnValue(RPCReply(xml))
diff --git a/adapters/adtran_common/net/rcmd.py b/adapters/adtran_common/net/rcmd.py
new file mode 100644
index 0000000..3062b4c
--- /dev/null
+++ b/adapters/adtran_common/net/rcmd.py
@@ -0,0 +1,112 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+from twisted.internet.defer import Deferred, succeed
+from twisted.internet.protocol import Factory, Protocol
+from twisted.conch.client.knownhosts import ConsoleUI, KnownHostsFile
+from twisted.conch.endpoints import SSHCommandClientEndpoint
+from twisted.internet import reactor
+
+log = structlog.get_logger()
+_open = open
+
+
+class RCmd(object):
+    """
+    Execute a one-time remote command via SSH
+    """
+    def __init__(self, host, username, password,
+                 command,
+                 port=None,
+                 keys=None,
+                 known_hosts=None,
+                 agent=None):
+        self.reactor = reactor
+        self.host = host
+        self.port = port
+        self.username = username
+        self.password = password
+        self.keys = keys
+        # self.knownHosts = known_hosts
+        self.knownHosts = known_hosts
+        self.agent = agent
+        self.command = command
+        self.ui = RCmd.FixedResponseUI(True)
+
+    class NoiseProtocol(Protocol):
+        def __init__(self):
+            self.finished = Deferred()
+            self.strings = ["bif", "pow", "zot"]
+
+        def connectionMade(self):
+            log.debug('connection-made')
+            self._send_noise()
+
+        def _send_noise(self):
+            if self.strings:
+                self.transport.write(self.strings.pop(0) + "\n")
+            else:
+                self.transport.loseConnection()
+
+        def dataReceived(self, data):
+            log.debug('rx', data=data)
+            if self.finished is not None and not self.finished.called:
+                self.finished.callback(data)
+            self._send_noise()
+
+        def connectionLost(self, reason):
+            log.debug('connection-lost')
+            if not self.finished.called:
+                self.finished.callback(reason)
+
+    class PermissiveKnownHosts(KnownHostsFile):
+        def verifyHostKey(self, ui, hostname, ip, key):
+            log.debug('verifyHostKey')
+            return True
+
+    class FixedResponseUI(ConsoleUI):
+        def __init__(self, result):
+            super(RCmd.FixedResponseUI, self).__init__(lambda: _open("/dev/null",
+                                                                     "r+b",
+                                                                     buffering=0))
+            self.result = result
+
+        def prompt(self, _):
+            log.debug('prompt')
+            return succeed(True)
+
+        def warn(self, text):
+            log.debug('warn')
+            pass
+
+    def _endpoint_for_command(self, command):
+        return SSHCommandClientEndpoint.newConnection(
+            self.reactor, command, self.username, self.host,
+            port=self.port,
+            password=self.password,
+            keys=self.keys,
+            agentEndpoint=self.agent,
+            knownHosts=self.knownHosts,
+            ui=self.ui
+        )
+
+    def execute(self):
+        endpoint = self._endpoint_for_command(self.command)
+        factory = Factory()
+        factory.protocol = RCmd.NoiseProtocol
+
+        d = endpoint.connect(factory)
+        d.addCallback(lambda proto: proto.finished)
+        return d
diff --git a/adapters/adtran_common/port.py b/adapters/adtran_common/port.py
new file mode 100644
index 0000000..0fc49dc
--- /dev/null
+++ b/adapters/adtran_common/port.py
@@ -0,0 +1,251 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+from enum import Enum
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, returnValue, succeed
+
+from pyvoltha.protos.common_pb2 import OperStatus, AdminState
+
+
+class AdtnPort(object):
+    """
+    A class similar to the 'Port' class in the VOLTHA
+    """
+    class State(Enum):
+        INITIAL = 0  # Created and initialization in progress
+        RUNNING = 1  # PON port contacted, ONU discovery active
+        STOPPED = 2  # Disabled
+        DELETING = 3  # Cleanup
+
+    def __init__(self, parent, **kwargs):
+        assert parent, 'parent is None'
+        assert 'port_no' in kwargs, 'Port number not found'
+
+        self.log = structlog.get_logger(device_id=parent.device_id)
+
+        self._parent = parent
+        self._port_no = kwargs.get('port_no')
+
+        # Set the following in your derived class.  These names are used in
+        # various ways.  Typically, the physical port name will be used during
+        # device handler conversations with the hardware (REST, NETCONF, ...)
+        # while the logical port name is what the outside world (ONOS, SEBA, ...)
+        # uses.  All ports have a physical port name, but only ports exposed through
+        # VOLTHA as a logical port will have a logical port name
+
+        self._physical_port_name = None
+        self._logical_port_name = None
+        self._label = None
+        self._port = None
+
+        self.sync_tick = 20.0
+        self.sync_deferred = None  # For sync of PON config to hardware
+
+        # TODO: Deprecate 'enabled' and use admin_state instead may want initial to always be
+        # disabled and then in derived classes, set it in the 'reset' method called on startup.
+        self._enabled = True
+        self._admin_state = AdminState.ENABLED
+
+        self._oper_status = OperStatus.DISCOVERED
+        self._state = AdtnPort.State.INITIAL
+
+        self.deferred = None  # General purpose
+
+        # Statistics
+        self.rx_packets = 0
+        self.rx_bytes = 0
+        self.tx_packets = 0
+        self.tx_bytes = 0
+        self.timestamp = 0      # UTC when KPI items last updated
+
+    def __del__(self):
+        self.stop()
+
+    def get_port(self):
+        """
+        Get the VOLTHA PORT object for this port
+        :return: VOLTHA Port object
+        """
+        raise NotImplementedError('Add to your derived class')
+
+    @property
+    def port_no(self):
+        return self._port_no
+
+    @property
+    def intf_id(self):
+        return self.port_no
+
+    @property
+    def physical_port_name(self):
+        return self._physical_port_name
+
+    @property
+    def logical_port_name(self):
+        return self._logical_port_name
+
+    @property                           # For backwards compatibility
+    def name(self):
+        return self._logical_port_name
+
+    @property
+    def state(self):
+        return self._state
+
+    @state.setter
+    def state(self, value):
+        self._state = value
+
+    @property
+    def olt(self):
+        return self._parent
+
+    @property
+    def admin_state(self):
+        return self._admin_state
+
+    @admin_state.setter
+    def admin_state(self, value):
+        if self._admin_state != value:
+            self._admin_state = value
+            if self._admin_state == AdminState.ENABLED:
+                self.start()
+            else:
+                self.stop()
+    @property
+    def enabled(self):
+        return self._admin_state == AdminState.ENABLED
+
+    @enabled.setter
+    def enabled(self, value):
+        assert isinstance(value, bool), 'enabled is a boolean'
+        self.admin_state = AdminState.ENABLED if value else AdminState.DISABLED
+
+    @property
+    def oper_status(self):
+        return self._oper_status
+
+    @property
+    def adapter_agent(self):
+        return self.olt.adapter_agent
+
+    def get_logical_port(self):
+        """
+        Get the VOLTHA logical port for this port. For PON ports, a logical port
+        is not currently created, so always return None
+
+        :return: VOLTHA logical port or None if not supported
+        """
+        return None
+
+    def cancel_deferred(self):
+        d1, self.deferred = self.deferred, None
+        d2, self.sync_deferred = self.sync_deferred, None
+
+        for d in [d1, d2]:
+            try:
+                if d is not None and not d.called:
+                    d.cancel()
+            except Exception:
+                pass
+
+    def _update_adapter_agent(self):
+        raise NotImplementedError('Add to your derived class')
+
+    def start(self):
+        """
+        Start/enable this PON and start ONU discover
+        """
+        if self.state == AdtnPort.State.RUNNING:
+            return succeed('Running')
+
+        self.log.info('start-port')
+
+        self.cancel_deferred()
+        self.state = AdtnPort.State.INITIAL
+        self._oper_status = OperStatus.ACTIVATING
+        self._enabled = True
+
+        # Do the rest of the startup in an async method
+        self.deferred = reactor.callLater(0.5, self.finish_startup)
+        self._update_adapter_agent()
+
+        return succeed('Scheduled')
+
+    def finish_startup(self):
+        if self.state == AdtnPort.State.INITIAL:
+            self.log.debug('final-startup')
+
+            # If here, initial settings were successfully written to hardware
+
+            self._enabled = True
+            self._admin_state = AdminState.ENABLED
+            self._oper_status = OperStatus.ACTIVE  # TODO: is this correct, how do we tell GRPC
+            self.state = AdtnPort.State.RUNNING
+
+            self.sync_deferred = reactor.callLater(self.sync_tick,
+                                                   self.sync_hardware)
+            self._update_adapter_agent()
+
+    @inlineCallbacks
+    def stop(self):
+        if self.state == AdtnPort.State.STOPPED:
+            self.log.debug('already stopped')
+            returnValue('Stopped')
+
+        self.log.info('stopping')
+        try:
+            self.cancel_deferred()
+            self._enabled = False
+            self._admin_state = AdminState.DISABLED
+            self._oper_status = OperStatus.UNKNOWN
+            self._update_adapter_agent()
+
+            self.state = AdtnPort.State.STOPPED
+
+            self.deferred = self.finish_stop()
+            yield self.deferred
+
+        except Exception as e:
+            self.log.exception('stop-failed', e=e)
+
+        returnValue('Stopped')
+
+    @inlineCallbacks
+    def finish_stop(self):
+        pass   # Add to your derived class if needed
+        returnValue(None)
+
+    def restart(self):
+        if self.state == AdtnPort.State.RUNNING or self.state == AdtnPort.State.STOPPED:
+            start_it = (self.state == AdtnPort.State.RUNNING)
+            self.state = AdtnPort.State.INITIAL
+            return self.start() if start_it else self.stop()
+        return succeed('nop')
+
+    def delete(self):
+        """
+        Parent device is being deleted. Do not change any config but
+        stop all polling
+        """
+        self.log.info('Deleting')
+        self.state = AdtnPort.State.DELETING
+        self.cancel_deferred()
+
+    def sync_hardware(self):
+        raise NotImplementedError('Add to your derived class')
+
+# TODO: Continue to consolidate port functionality
diff --git a/adapters/adtran_common/xpon/__init__.py b/adapters/adtran_common/xpon/__init__.py
new file mode 100644
index 0000000..b0fb0b2
--- /dev/null
+++ b/adapters/adtran_common/xpon/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_common/xpon/best_effort.py b/adapters/adtran_common/xpon/best_effort.py
new file mode 100644
index 0000000..99622af
--- /dev/null
+++ b/adapters/adtran_common/xpon/best_effort.py
@@ -0,0 +1,47 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+import json
+
+log = structlog.get_logger()
+
+
+class BestEffort(object):
+    def __init__(self, bandwidth, priority, weight):
+        self.bandwidth = bandwidth   # bps
+        self.priority = priority     # 0.255
+        self.weight = weight         # 0..100
+
+    def __str__(self):
+        return "BestEffort: {}/p-{}/w-{}".format(self.bandwidth,
+                                                 self.priority,
+                                                 self.weight)
+
+    def to_dict(self):
+        val = {
+            'bandwidth': self.bandwidth,
+            'priority': self.priority,
+            'weight': self.weight
+        }
+        return val
+
+    def add_to_hardware(self, session, pon_id, onu_id, alloc_id, best_effort):
+        from ..adtran_olt_handler import AdtranOltHandler
+
+        uri = AdtranOltHandler.GPON_TCONT_CONFIG_URI.format(pon_id, onu_id, alloc_id)
+        data = json.dumps({'best-effort': best_effort.to_dict()})
+        name = 'tcont-best-effort-{}-{}: {}'.format(pon_id, onu_id, alloc_id)
+
+        return session.request('PATCH', uri, data=data, name=name)
diff --git a/adapters/adtran_common/xpon/gem_port.py b/adapters/adtran_common/xpon/gem_port.py
new file mode 100644
index 0000000..14dccb1
--- /dev/null
+++ b/adapters/adtran_common/xpon/gem_port.py
@@ -0,0 +1,63 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+class GemPort(object):
+    """
+    Class to wrap TCont capabilities
+    """
+    def __init__(self, gem_id, alloc_id, uni_id, tech_profile_id,
+                 encryption=False,
+                 multicast=False,
+                 traffic_class=None,
+                 handler=None,
+                 is_mock=False):
+
+        self.gem_id = gem_id
+        self._alloc_id = alloc_id
+        self.uni_id = uni_id
+        self.tech_profile_id = tech_profile_id
+        self.traffic_class = traffic_class
+        self._encryption = encryption
+        self.multicast = multicast
+        self._handler = handler
+        self._is_mock = is_mock
+        self.tech_profile_id = None     # TODO: Make property and clean up object once tech profiles fully supported
+
+        # Statistics
+        self.rx_packets = 0
+        self.rx_bytes = 0
+        self.tx_packets = 0
+        self.tx_bytes = 0
+
+    def __str__(self):
+        return "GemPort: alloc-id: {}, gem-id: {}, uni-id: {}".format(self.alloc_id,
+                                                                      self.gem_id,
+                                                                      self.uni_id)
+
+    @property
+    def alloc_id(self):
+        return self._alloc_id
+
+    @property
+    def encryption(self):
+        return self._encryption
+
+    def to_dict(self):
+        return {
+            'port-id': self.gem_id,
+            'alloc-id': self.alloc_id,
+            'encryption': self._encryption,
+            'omci-transport': False
+        }
diff --git a/adapters/adtran_common/xpon/tcont.py b/adapters/adtran_common/xpon/tcont.py
new file mode 100644
index 0000000..79d94fa
--- /dev/null
+++ b/adapters/adtran_common/xpon/tcont.py
@@ -0,0 +1,29 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+class TCont(object):
+    """
+    Class to wrap TCont capabilities
+    """
+    def __init__(self, alloc_id, tech_profile_id, traffic_descriptor, uni_id, is_mock=False):
+        self.alloc_id = alloc_id
+        self.traffic_descriptor = traffic_descriptor
+        self._is_mock = is_mock
+        self.tech_profile_id = tech_profile_id
+        self.uni_id = uni_id
+
+    def __str__(self):
+        return "TCont: alloc-id: {}, uni-id: {}".format(self.alloc_id,
+                                                        self.uni_id)
diff --git a/adapters/adtran_common/xpon/traffic_descriptor.py b/adapters/adtran_common/xpon/traffic_descriptor.py
new file mode 100644
index 0000000..230605b
--- /dev/null
+++ b/adapters/adtran_common/xpon/traffic_descriptor.py
@@ -0,0 +1,75 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from enum import Enum
+
+
+class TrafficDescriptor(object):
+    """
+    Class to wrap the uplink traffic descriptor.
+    """
+    class AdditionalBwEligibility(Enum):
+        NONE = 0
+        BEST_EFFORT_SHARING = 1
+        NON_ASSURED_SHARING = 2             # Should match xpon.py values
+        DEFAULT = NONE
+
+        @staticmethod
+        def to_string(value):
+            return {
+                TrafficDescriptor.AdditionalBwEligibility.NON_ASSURED_SHARING: "non-assured-sharing",
+                TrafficDescriptor.AdditionalBwEligibility.BEST_EFFORT_SHARING: "best-effort-sharing",
+                TrafficDescriptor.AdditionalBwEligibility.NONE: "none"
+            }.get(value, "unknown")
+
+        @staticmethod
+        def from_value(value):
+            """
+            Matches both Adtran and xPON values
+            :param value:
+            :return:
+            """
+            return {
+                0: TrafficDescriptor.AdditionalBwEligibility.NONE,
+                1: TrafficDescriptor.AdditionalBwEligibility.BEST_EFFORT_SHARING,
+                2: TrafficDescriptor.AdditionalBwEligibility.NON_ASSURED_SHARING,
+            }.get(value, TrafficDescriptor.AdditionalBwEligibility.DEFAULT)
+
+    def __init__(self, fixed, assured, maximum,
+                 additional=AdditionalBwEligibility.DEFAULT,
+                 best_effort=None):
+        self.fixed_bandwidth = fixed       # bps
+        self.assured_bandwidth = assured   # bps
+        self.maximum_bandwidth = maximum   # bps
+        self.additional_bandwidth_eligibility = additional
+        self.best_effort = best_effort\
+            if additional == TrafficDescriptor.AdditionalBwEligibility.BEST_EFFORT_SHARING\
+            else None
+
+    def __str__(self):
+        return "TrafficDescriptor: {}/{}/{}".format(self.fixed_bandwidth,
+                                                    self.assured_bandwidth,
+                                                    self.maximum_bandwidth)
+
+    def to_dict(self):
+        val = {
+            'fixed-bandwidth': self.fixed_bandwidth,
+            'assured-bandwidth': self.assured_bandwidth,
+            'maximum-bandwidth': self.maximum_bandwidth,
+            'additional-bandwidth-eligibility':
+                TrafficDescriptor.AdditionalBwEligibility.to_string(
+                    self.additional_bandwidth_eligibility)
+        }
+        return val
+
diff --git a/adapters/adtran_olt/README.md b/adapters/adtran_olt/README.md
new file mode 100644
index 0000000..737b73b
--- /dev/null
+++ b/adapters/adtran_olt/README.md
@@ -0,0 +1,176 @@
+# Adtran OLT Device Adapter
+To preprovision an Adtran OLT, you will need to provide the IP Address and 
+the NETCONF/REST credentials for the device.  The NETCONF/REST credentials are an
+extension of the existing **preprovision_olt** command and these are placed after
+entering two dashes '_--_'.  The full syntax to use is.
+
+| Short | Long               | Default    | Notes |
+| :---: | :----------------: | :--------: | ----- |
+|  -u   | --nc_username      | ''         | NETCONF Username |
+|  -p   | --nc_password      | ''         | NETCONF Password |
+|  -t   | --nc_port          | 830        | NETCONF TCP Port |
+|  -U   | --rc_username      | ''         | REST Username |
+|  -P   | --rc_password      | ''         | REST Password |
+|  -T   | --rc_port          | 8081       | REST TCP Port |
+|  -z   | --zmq_port         | 5656       | ZeroMQ OMCI Proxy Port |
+|  -M   | --multicast_vlan   | 4000       | Multicast VLANs (comma-delimited) |
+|  -Z   | --pio_port         | 5657       | PIO Service ZeroMQ Port |
+|  -o   | --resource_mgr_key | adtran_olt | OLT Type to look up associated resource manager configuration |
+
+For example, if your Adtran OLT is address 10.17.174.193 with the default TCP ports and
+NETCONF credentials of admin/admin and REST credentials of ADMIN/ADMIN, the command line
+would be:
+
+```bash
+    preprovision_olt -t adtran_olt -i 10.17.174.193 -- -u admin -p admin -U ADMIN -P ADMIN
+```
+or
+```bash
+    preprovision_olt -t adtran_olt -i 10.17.174.193 -- --nc_username admin --nc_password admin --rc_username ADMIN --rc_password ADMIN
+```
+
+In addition to specifying the Adtran OLT by a single IP address, the host & port provisioning option
+is also supported. This allows you to configure the address of the Adtran OLT with the same command line
+option as the OpenOLT device adapter. For the port number, just specify the netconf port (default 830)
+as in:
+
+```bash
+    preprovision_olt -t adtran_olt -H 10.17.174.193:830
+```
+or
+```bash
+    preprovision_olt -t adtran_olt --host_and_port 10.17.174.193:830
+```
+
+## Resource Manager Provisioning Support
+Starting in Fall of 2018, Resource Manager Support was added as the default provisioning mechanism
+for the Adtran OLT as the xPON provisioning support will be deprecated by the v2.0 release in
+late-2018/early-2019.
+
+The Resource Manager is used to manage device PON resource pool and allocate PON resources from
+such pools. Resource Manager module currently manages assignment of ONU-ID, ALLOC-ID and
+GEM-PORT ID. The Resource Manager uses the KV store to back-up all the resource pool allocation data.
+
+The Adtran OLT adapter interacts with Resource Manager module for PON resource assignments. The
+adtranolt_resource_manager module is responsible for interfacing with the Resource Manager.
+
+The Resource Manager optionally uses olt_vendor_type specific resource ranges to initialize the
+PON resource pools. In order to utilize this option, create an entry for olt_vendor_type specific
+PON resource ranges on the KV store. Please make sure to use the same KV store used by the VOLTHA core.
+
+### For example
+To specify **ADTRAN OLT** device specific resource ranges, first create a JSON file
+_adtran_olt_resource_range.json_ with the following entry
+
+{
+    "onu_start_idx": 0,
+    "onu_end_idx": 127,
+    "alloc_id_start_idx": 1024,
+    "alloc_id_end_idx": 4222,
+    "gem_port_id_start_idx": 2176,
+    "gem_port_id_end_idx": 16383,
+    "num_of_pon_port": 16
+}
+This data should be put on the KV store location _resource_manager/xgspon/resource_ranges/adtran_olt_
+
+The format of the KV store location is resource_manager/<technology>/resource_ranges/<resource_mgr_key>
+
+In the below example the KV store is assumed to be Consul. However the same is applicable to be
+etcd or any other KV store. Please make sure to use the same KV store used by the VOLTHA core.
+
+```bash
+curl -X PUT -H "Content-Type: application/json" \
+   http://127.0.0.1:8500/v1/kv/resource_manager/xgspon/resource_ranges/adtran_olt \
+   -d @./adtran_olt_resource_range.json 
+```
+The olt_vendor_type should be referred to during the preprovisioning step as shown below. The
+olt_vendor_type is an extra option and should be specified after --. The -o specifies the resource_mgr_key.
+
+ (voltha) preprovision_olt -t adtran -H 192.168.1.100:830 -- -o adtran_olt
+Once the OLT device is enabled, any further PON Resource assignments will happen within the PON Resource ranges defined in asfvolt16_resource_range.json and placed on the KV store.
+
+Additional Notes
+If a default resource range profile should be used with all olt_vendor_types, then place such Resource Range profile at the below path on the KV store.
+
+resource_manager/xgspon/resource_ranges/default
+
+## xPON Provisioning Support
+
+Currently the Adtran Device Adapter supports xPON provisioning to enable PON ports, or activate ONUs, you
+must use the appropriate commands. In the VOLTHA v2.0 release (Q4 2018?), the xPON provisioning will be removed
+from VOLTHA and replaced with Technology Profiles. _By default, this provisioning is now disabled and you should
+use the '-X' extra-arguments provisioning command switch if you wish to use it_.
+
+### REST Based xPON Pre-Provisioning
+In addition to CLI provisioning, the Adtran OLT Device Adapter can also be provisioned though the
+VOLTHA Northbound REST API. The following examples show curl commands when running with the **_Consul_**
+key-value store. Similar curl commands can be used when **_etcd_** is used as the key value store
+
+```bash
+VOLTHA_IP=localhost
+OLT_IP=10.17.174.228
+REST_PORT=`curl -s http://localhost:8500/v1/catalog/service/voltha-envoy-8443 | jq -r '.[0].ServicePort'`
+    
+curl -k -s -X POST https://${VOLTHA_IP}:${REST_PORT}/api/v1/devices \
+ --header 'Content-Type: application/json' --header 'Accept: application/json' \
+ -d "{\"type\": \"adtran_olt\",\"ipv4_address\": \"${OLT_IP}\",\"extra_args\": \"-u admin -p admin -U ADMIN -P ADMIN\"}" \
+| jq '.' | tee /tmp/adtn-olt.json
+```
+This will not only pre-provision the OLT, but it will also return the created VOLTHA Device ID for use other commands.
+The output is also shown on the console as well:
+
+```bash    
+curl -k -s -X POST https://${VOLTHA_IP}:${REST_PORT}/api/v1/devices \
+  --header 'Content-Type: application/json' --header 'Accept: application/json' \
+  -d "{\"type\": \"adtran_olt\",\"ipv4_address\": \"${OLT_IP}\",\"extra_args\": \"-u admin -p admin -U ADMIN -P ADMIN\"}" \
+| jq '.' | tee /tmp/adtn-olt.json
+{
+  "extra_args": "-u admin -p admin -U ADMIN -P ADMIN",
+  "vendor": "",
+  "channel_terminations": [],
+  "parent_port_no": 0,
+  "connect_status": "UNKNOWN",
+  "root": false,
+  "adapter": "adtran_olt",
+  "vlan": 0,
+  "hardware_version": "",
+  "ports": [],
+  "ipv4_address": "10.17.174.228",
+  "parent_id": "",
+  "oper_status": "UNKNOWN",
+  "admin_state": "PREPROVISIONED",
+  "reason": "",
+  "serial_number": "",
+  "model": "",
+  "type": "adtran_olt",
+  "id": "00017cbb382b9260",
+  "firmware_version": ""
+}
+```
+Besides specifying the "ipv4_address" leaf, you can alternatively use the "host_and_port" leaf to
+provide the IP Host address and the NetCONF port as in "10.17.174.228:830"
+
+### Enabling the Pre-Provisioned OLT
+To enable the OLT, you need the retrieve the OLT Device ID and issue a POST request to the proper URL as in:
+```bash
+DEVICE_ID=$(jq .id /tmp/adtn-olt.json | sed 's/"//g')
+
+curl -k -s -X POST https://${VOLTHA_IP}:${REST_PORT}/api/v1/local/devices/${DEVICE_ID}/enable
+```
+#### Other REST APIs
+To list out any devices, you can use the following command:
+
+```bash
+curl -k -s  https://${VOLTHA_IP}:${REST_PORT}/api/v1/devices | json_pp
+```
+
+Other API endpoints (beyond the /v1/ field above) can be listed with the following command
+
+```bash
+curl -k -s https://${VOLTHA_IP}:${REST_PORT}/api/v1 | json_pp
+```
+
+# Tested OLT Device Driver versions
+
+The minimum version number of for the OLT software is: *_11971320F1-ML-3309_* or later
+
diff --git a/adapters/adtran_olt/__init__.py b/adapters/adtran_olt/__init__.py
new file mode 100644
index 0000000..d67fcf2
--- /dev/null
+++ b/adapters/adtran_olt/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present ADTRAN, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_olt/adtran_olt.py b/adapters/adtran_olt/adtran_olt.py
new file mode 100644
index 0000000..c052b78
--- /dev/null
+++ b/adapters/adtran_olt/adtran_olt.py
@@ -0,0 +1,222 @@
+#
+# Copyright 2019-present ADTRAN, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+"""
+ADTRAN OLT Adapter.
+"""
+import structlog
+from twisted.internet import reactor, defer
+
+from pyvoltha.adapters.iadapter import OltAdapter
+from pyvoltha.protos import third_party
+from pyvoltha.protos.common_pb2 import AdminState
+
+from adtran_olt_handler import AdtranOltHandler
+
+
+_ = third_party
+log = structlog.get_logger()
+
+
+class AdtranOltAdapter(OltAdapter):
+    name = 'adtran_olt'
+
+    def __init__(self, core_proxy, adapter_proxy, config):
+        super(AdtranOltAdapter, self).__init__(core_proxy=core_proxy,
+                                               adapter_proxy=adapter_proxy,
+                                               config=config,
+                                               device_handler_class=AdtranOltHandler,
+                                               name=AdtranOltAdapter.name,
+                                               vendor='ADTRAN, Inc.',
+                                               version='2.0.0',
+                                               device_type=AdtranOltAdapter.name,
+                                               accepts_bulk_flow_update=True,
+                                               accepts_add_remove_flow_updates=False)  # TODO: Implement me
+
+        log.debug('adtran_olt.__init__')
+
+    def health(self):
+        """
+        Return a 3-state health status using the voltha.HealthStatus message.
+
+        :return: Deferred or direct return with voltha.HealthStatus message
+        """
+        # TODO: Currently this is always healthy for every adapter.
+        #       If we decide not to modify this, delete this method and use base class method
+        from pyvoltha.protos.health_pb2 import HealthStatus
+        return HealthStatus(state=HealthStatus.HEALTHY)
+
+    def abandon_device(self, device):
+        """
+        Make sure the adapter no longer looks after device. This is called
+        if device ownership is taken over by another Voltha instance.
+
+        :param device: A Voltha.Device object
+        :return: (Deferred) Shall be fired to acknowledge abandonment.
+        """
+        log.info('abandon-device', device=device)
+        raise NotImplementedError()
+
+    def adopt_device(self, device):
+        """
+        Make sure the adapter looks after given device. Called when a device
+        is provisioned top-down and needs to be activated by the adapter.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions. Such extensions shall be described as part of
+                the device type specification returned by device_types().
+        :return: (Deferred) Shall be fired to acknowledge device ownership.
+        """
+        log.info('adopt-device', device=device)
+        kwargs = {
+            'adapter': self,
+            'device-id': device.id
+        }
+        self.devices_handlers[device.id] = self.device_handler_class(**kwargs)
+        d = defer.Deferred()
+        reactor.callLater(0, self.devices_handlers[device.id].activate, d, False)
+        return d
+
+    def reconcile_device(self, device):
+        try:
+            self.devices_handlers[device.id] = self.device_handler_class(self,
+                                                                         device.id)
+            # Work only required for devices that are in ENABLED state
+            if device.admin_state == AdminState.ENABLED:
+
+                kwargs = {
+                    'adapter': self,
+                    'device-id': device.id
+                }
+                self.devices_handlers[device.id] =self.device_handler_class(**kwargs)
+                d = defer.Deferred()
+                reactor.callLater(0, self.devices_handlers[device.id].activate, d, True)
+
+            else:
+                # Invoke the children reconciliation which would setup the
+                # basic children data structures
+                self.core_proxy.reconcile_child_devices(device.id)
+            return device
+
+        except Exception, e:
+            log.exception('Exception', e=e)
+
+    def self_test_device(self, device):
+        """
+        This is called to Self a device based on a NBI call.
+        :param device: A Voltha.Device object.
+        :return: Will return result of self test
+        """
+        log.info('self-test-device', device=device.id)
+        # TODO: Support self test?
+        from pyvoltha.protos.voltha_pb2 import SelfTestResponse
+        return SelfTestResponse(result=SelfTestResponse.NOT_SUPPORTED)
+
+    def delete_device(self, device):
+        """
+        This is called to delete a device from the PON based on a NBI call.
+        If the device is an OLT then the whole PON will be deleted.
+
+        :param device: A Voltha.Device object.
+        :return: (Deferred) Shall be fired to acknowledge the deletion.
+        """
+        log.info('delete-device', device=device)
+        handler = self.devices_handlers.get(device.id)
+        if handler is not None:
+            reactor.callLater(0, handler.delete)
+            del self.device_handlers[device.id]
+            del self.logical_device_id_to_root_device_id[device.parent_id]
+
+        return device
+
+    def download_image(self, device, request):
+        """
+        This is called to request downloading a specified image into the standby partition
+        of a device based on a NBI call.
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :return: (Deferred) Shall be fired to acknowledge the download.
+        """
+        log.info('image_download', device=device, request=request)
+        handler = self.devices_handlers.get(device.id)
+        if handler is not None:
+            return handler.start_download(device, request, defer.Deferred())
+
+    def get_image_download_status(self, device, request):
+        """
+        This is called to inquire about a requested image download status based
+        on a NBI call. The adapter is expected to update the DownloadImage DB object
+        with the query result
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :return: (Deferred) Shall be fired to acknowledge
+        """
+        log.info('get_image_download', device=device, request=request)
+        handler = self.devices_handlers.get(device.id)
+        if handler is not None:
+            return handler.download_status(device, request, defer.Deferred())
+
+    def cancel_image_download(self, device, request):
+        """
+        This is called to cancel a requested image download
+        based on a NBI call.  The admin state of the device will not
+        change after the download.
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :return: (Deferred) Shall be fired to acknowledge
+        """
+        log.info('cancel_image_download', device=device)
+        handler = self.devices_handlers.get(device.id)
+        if handler is not None:
+            return handler.cancel_download(device, request, defer.Deferred())
+
+    def activate_image_update(self, device, request):
+        """
+        This is called to activate a downloaded image from
+        a standby partition into active partition.
+        Depending on the device implementation, this call
+        may or may not cause device reboot.
+        If no reboot, then a reboot is required to make the
+        activated image running on device
+        This call is expected to be non-blocking.
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :return: (Deferred) OperationResponse object.
+        """
+        log.info('activate_image_update', device=device, request=request)
+        handler = self.devices_handlers.get(device.id)
+        if handler is not None:
+            return handler.activate_image(device, request, defer.Deferred())
+
+    def revert_image_update(self, device, request):
+        """
+        This is called to deactivate the specified image at
+        active partition, and revert to previous image at
+        standby partition.
+        Depending on the device implementation, this call
+        may or may not cause device reboot.
+        If no reboot, then a reboot is required to make the
+        previous image running on device
+        This call is expected to be non-blocking.
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :return: (Deferred) OperationResponse object.
+        """
+        log.info('revert_image_update', device=device, request=request)
+        handler = self.devices_handlers.get(device.id)
+        if handler is not None:
+            return handler.revert_image(device, request, defer.Deferred())
diff --git a/adapters/adtran_olt/adtran_olt.yml b/adapters/adtran_olt/adtran_olt.yml
new file mode 100644
index 0000000..8dc42a3
--- /dev/null
+++ b/adapters/adtran_olt/adtran_olt.yml
@@ -0,0 +1,67 @@
+---
+# Copyright 2019-present ADTRAN, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+logging:
+    version: 1
+
+    formatters:
+      brief:
+        format: '%(message)s'
+      default:
+        format: '%(asctime)s.%(msecs)03d %(levelname)-8s %(threadName)s %(module)s.%(funcName)s %(message)s'
+        datefmt: '%Y%m%dT%H%M%S'
+
+    handlers:
+        console:
+            class : logging.StreamHandler
+            level: DEBUG
+            formatter: default
+            stream: ext://sys.stdout
+        localRotatingFile:
+            class: logging.handlers.RotatingFileHandler
+            filename: adtran_olt.log
+            formatter: default
+            maxBytes: 2097152
+            backupCount: 10
+            level: DEBUG
+        null:
+            class: logging.NullHandler
+
+    loggers:
+        amqp:
+            handlers: [null]
+            propagate: False
+        conf:
+            propagate: False
+        '': # root logger
+            handlers: [console, localRotatingFile]
+            level: DEBUG # this can be bumped up/down by -q and -v command line
+                        # options
+            propagate: False
+
+
+kafka-cluster-proxy:
+    event_bus_publisher:
+        topic_mappings:
+            'model-change-events':
+                kafka_topic: 'voltha.events'
+                filters:     [null]
+            'alarms':
+                kafka_topic: 'voltha.alarms'
+                filters:     [null]
+            'kpis':
+                kafka_topic: 'voltha.kpis'
+                filters:     [null]
+
diff --git a/adapters/adtran_olt/adtran_olt_handler.py b/adapters/adtran_olt/adtran_olt_handler.py
new file mode 100644
index 0000000..ad32b84
--- /dev/null
+++ b/adapters/adtran_olt/adtran_olt_handler.py
@@ -0,0 +1,1400 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import datetime
+import random
+import xmltodict
+
+from twisted.internet import reactor
+from twisted.internet.defer import returnValue, inlineCallbacks, succeed
+
+from codec.olt_state import OltState
+from adapters.adtran_common.download import Download
+from adapters.adtran_common.flow.flow_entry import FlowEntry
+from net.pio_zmq import PioClient
+from net.pon_zmq import PonClient
+from resources.adtran_olt_resource_manager import AdtranOltResourceMgr
+from adapters.adtran_common.adtran_device_handler import AdtranDeviceHandler
+from resources import adtranolt_platform as platform
+from adapters.adtran_common.net.rcmd import RCmd
+
+from pyvoltha.common.tech_profile.tech_profile import *
+from pyvoltha.common.openflow.utils import ofp, mk_flow_stat, in_port, output, vlan_vid
+from pyvoltha.adapters.common.frameio.frameio import hexify
+from pyvoltha.adapters.extensions.omci.omci import *
+from pyvoltha.protos.voltha_pb2 import Device
+from pyvoltha.protos.common_pb2 import AdminState, OperStatus
+from pyvoltha.protos.device_pb2 import ImageDownload, Image, Port
+from pyvoltha.protos.openflow_13_pb2 import OFPP_MAX, OFPC_GROUP_STATS, OFPC_PORT_STATS, \
+    OFPC_TABLE_STATS, OFPC_FLOW_STATS, ofp_switch_features, ofp_desc
+
+
+class AdtranOltHandler(AdtranDeviceHandler):
+    """
+    The OLT Handler is used to wrap a single instance of a 10G OLT 1-U pizza-box
+    """
+    MIN_OLT_HW_VERSION = datetime.datetime(2017, 1, 5)
+
+    # Full table output
+
+    GPON_OLT_HW_URI = '/restconf/data/gpon-olt-hw'
+    GPON_OLT_HW_STATE_URI = GPON_OLT_HW_URI + ':olt-state'
+    GPON_OLT_HW_CONFIG_URI = GPON_OLT_HW_URI + ':olt'
+    GPON_PON_CONFIG_LIST_URI = GPON_OLT_HW_CONFIG_URI + '/pon'
+
+    # Per-PON info
+
+    GPON_PON_STATE_URI = GPON_OLT_HW_STATE_URI + '/pon={}'        # .format(pon-id)
+    GPON_PON_CONFIG_URI = GPON_PON_CONFIG_LIST_URI + '={}'        # .format(pon-id)
+
+    GPON_ONU_CONFIG_LIST_URI = GPON_PON_CONFIG_URI + '/onus/onu'  # .format(pon-id)
+    GPON_ONU_CONFIG_URI = GPON_ONU_CONFIG_LIST_URI + '={}'        # .format(pon-id,onu-id)
+
+    GPON_TCONT_CONFIG_LIST_URI = GPON_ONU_CONFIG_URI + '/t-conts/t-cont'  # .format(pon-id,onu-id)
+    GPON_TCONT_CONFIG_URI = GPON_TCONT_CONFIG_LIST_URI + '={}'            # .format(pon-id,onu-id,alloc-id)
+
+    GPON_GEM_CONFIG_LIST_URI = GPON_ONU_CONFIG_URI + '/gem-ports/gem-port'  # .format(pon-id,onu-id)
+    GPON_GEM_CONFIG_URI = GPON_GEM_CONFIG_LIST_URI + '={}'                  # .format(pon-id,onu-id,gem-id)
+
+    GPON_PON_DISCOVER_ONU = '/restconf/operations/gpon-olt-hw:discover-onu'
+
+    BASE_ONU_OFFSET = 64
+
+    def __init__(self, **kwargs):
+        super(AdtranOltHandler, self).__init__(**kwargs)
+
+        self.status_poll = None
+        self.status_poll_interval = 5.0
+        self.status_poll_skew = self.status_poll_interval / 10
+        self._pon_agent = None
+        self._pio_agent = None
+        self._ssh_deferred = None
+        self._system_id = None
+        self._download_protocols = None
+        self._download_deferred = None
+        self._downloads = {}        # name -> Download obj
+        self._pio_exception_map = []
+
+        self.downstream_shapping_supported = True      # 1971320F1-ML-4154 and later
+
+        # FIXME:  Remove once we containerize.  Only exists to keep BroadCom OpenOMCI ONU Happy
+        #         when it reaches up our rear and tries to yank out a UNI port number
+        self.platform_class = None
+
+        # To keep broadcom ONU happy
+        self.platform = platform()           # TODO: Remove once tech-profiles & containerization are done !!!
+
+    def __del__(self):
+        # OLT Specific things here.
+        #
+        # If you receive this during 'enable' of the object, you probably threw an
+        # uncaught exception which triggered an errback in the VOLTHA core.
+        d, self.status_poll = self.status_poll, None
+
+        # Clean up base class as well
+        AdtranDeviceHandler.__del__(self)
+
+    def _cancel_deferred(self):
+        d1, self.status_poll = self.status_poll, None
+        d2, self._ssh_deferred = self._ssh_deferred, None
+        d3, self._download_deferred = self._download_deferred, None
+
+        for d in [d1, d2, d3]:
+            try:
+                if d is not None and not d.called:
+                    d.cancel()
+            except:
+                pass
+
+    def __str__(self):
+        return "AdtranOltHandler: {}".format(self.ip_address)
+
+    @property
+    def system_id(self):
+        return self._system_id
+
+    @system_id.setter
+    def system_id(self, value):
+        if self._system_id != value:
+            self._system_id = value
+
+            data = json.dumps({'olt-id': str(value)})
+            uri = AdtranOltHandler.GPON_OLT_HW_CONFIG_URI
+            self.rest_client.request('PATCH', uri, data=data, name='olt-system-id')
+
+    @inlineCallbacks
+    def get_device_info(self, device):
+        """
+        Perform an initial network operation to discover the device hardware
+        and software version. Serial Number would be helpful as well.
+
+        Upon successfully retrieving the information, remember to call the
+        'start_heartbeat' method to keep in contact with the device being managed
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions. Such extensions shall be described as part of
+                the device type specification returned by device_types().
+        """
+        from codec.physical_entities_state import PhysicalEntitiesState
+        # TODO: After a CLI 'reboot' command, the device info may get messed up (prints labels and not values)
+        # #     Enter device and type 'show'
+        device = {
+            'model': 'n/a',
+            'hardware_version': 'unknown',
+            'serial_number': 'unknown',
+            'vendor': 'ADTRAN, Inc.',
+            'firmware_version': 'unknown',
+            'running-revision': 'unknown',
+            'candidate-revision': 'unknown',
+            'startup-revision': 'unknown',
+            'software-images': []
+        }
+        if self.is_virtual_olt:
+            returnValue(device)
+
+        try:
+            pe_state = PhysicalEntitiesState(self.netconf_client)
+            self.startup = pe_state.get_state()
+            results = yield self.startup
+
+            if results.ok:
+                modules = pe_state.get_physical_entities('adtn-phys-mod:module')
+
+                if isinstance(modules, list):
+                    module = modules[0]
+
+                    name = str(module.get('model-name', 'n/a')).translate(None, '?')
+                    model = str(module.get('model-number', 'n/a')).translate(None, '?')
+
+                    device['model'] = '{} - {}'.format(name, model) if len(name) > 0 else \
+                        module.get('parent-entity', 'n/a')
+                    device['hardware_version'] = str(module.get('hardware-revision',
+                                                                'n/a')).translate(None, '?')
+                    device['serial_number'] = str(module.get('serial-number',
+                                                             'n/a')).translate(None, '?')
+                    if 'software' in module:
+                        if 'software' in module['software']:
+                            software = module['software']['software']
+                            if isinstance(software, dict):
+                                device['running-revision'] = str(software.get('running-revision',
+                                                                              'n/a')).translate(None, '?')
+                                device['candidate-revision'] = str(software.get('candidate-revision',
+                                                                                'n/a')).translate(None, '?')
+                                device['startup-revision'] = str(software.get('startup-revision',
+                                                                              'n/a')).translate(None, '?')
+                            elif isinstance(software, list):
+                                for sw_item in software:
+                                    sw_type = sw_item.get('name', '').lower()
+                                    if sw_type == 'firmware':
+                                        device['firmware_version'] = str(sw_item.get('running-revision',
+                                                                                     'unknown')).translate(None, '?')
+                                    elif sw_type == 'software':
+                                        for rev_type in ['startup-revision',
+                                                         'running-revision',
+                                                         'candidate-revision']:
+                                            if rev_type in sw_item:
+                                                image = Image(name=rev_type,
+                                                              version=sw_item[rev_type],
+                                                              is_active=(rev_type == 'running-revision'),
+                                                              is_committed=True,
+                                                              is_valid=True,
+                                                              install_datetime='Not Available',
+                                                              hash='Not Available')
+                                                device['software-images'].append(image)
+
+                    # Update features based on version
+                    # Format expected to be similar to:  1971320F1-ML-4154
+
+                    running_version = next((image.version for image in device.get('software-images', list())
+                                           if image.is_active), '').split('-')
+                    if len(running_version) > 2:
+                        try:
+                            self.downstream_shapping_supported = int(running_version[-1]) >= 4154
+                        except ValueError:
+                            pass
+
+        except Exception as e:
+            self.log.exception('dev-info-failure', e=e)
+            raise
+
+        returnValue(device)
+
+    def initialize_resource_manager(self):
+        # Initialize the resource and tech profile managers
+        extra_args = '--olt_model {}'.format(self.resource_manager_key)
+        self.resource_mgr = AdtranOltResourceMgr(self.device_id,
+                                                 self.host_and_port,
+                                                 extra_args,
+                                                 self.default_resource_mgr_device_info)
+        self._populate_tech_profile_per_pon_port()
+
+    @property
+    def default_resource_mgr_device_info(self):
+        class AdtranOltDevInfo(object):
+            def __init__(self, pon_ports):
+                self.technology = "xgspon"
+                self.onu_id_start = 0
+                self.onu_id_end = platform.MAX_ONUS_PER_PON
+                self.alloc_id_start = platform.MIN_TCONT_ALLOC_ID
+                self.alloc_id_end = platform.MAX_TCONT_ALLOC_ID
+                self.gemport_id_start = platform.MIN_GEM_PORT_ID
+                self.gemport_id_end = platform.MAX_GEM_PORT_ID
+                self.pon_ports = len(pon_ports)
+                self.max_tconts = platform.MAX_TCONTS_PER_ONU
+                self.max_gem_ports = platform.MAX_GEM_PORTS_PER_ONU
+                self.intf_ids = pon_ports.keys()    # PON IDs
+
+        return AdtranOltDevInfo(self.southbound_ports)
+
+    def _populate_tech_profile_per_pon_port(self):
+        self.tech_profiles = {intf_id: self.resource_mgr.resource_managers[intf_id].tech_profile
+                              for intf_id in self.resource_mgr.device_info.intf_ids}
+
+        # Make sure we have as many tech_profiles as there are pon ports on
+        # the device
+        assert len(self.tech_profiles) == self.resource_mgr.device_info.pon_ports
+
+    def get_tp_path(self, intf_id, ofp_port_name):
+        # TODO: Should get Table id form the flow, as of now hardcoded to DEFAULT_TECH_PROFILE_TABLE_ID (64)
+        # 'tp_path' contains the suffix part of the tech_profile_instance path.
+        # The prefix to the 'tp_path' should be set to \
+        # TechProfile.KV_STORE_TECH_PROFILE_PATH_PREFIX by the ONU adapter.
+        return self.tech_profiles[intf_id].get_tp_path(DEFAULT_TECH_PROFILE_TABLE_ID,
+                                                       ofp_port_name)
+
+    def delete_tech_profile_instance(self, intf_id, onu_id, logical_port):
+        # Remove the TP instance associated with the ONU
+        ofp_port_name = self.get_ofp_port_name(intf_id, onu_id, logical_port)
+        tp_path = self.get_tp_path(intf_id, ofp_port_name)
+        return self.tech_profiles[intf_id].delete_tech_profile_instance(tp_path)
+
+    def get_ofp_port_name(self, pon_id, onu_id, logical_port_number):
+        parent_port_no = self.pon_id_to_port_number(pon_id)
+        child_device = self.adapter_agent.get_child_device(self.device_id,
+                                                           parent_port_no=parent_port_no, onu_id=onu_id)
+        if child_device is None:
+            self.log.error("could-not-find-child-device", parent_port_no=pon_id, onu_id=onu_id)
+            return None, None
+
+        ports = self.adapter_agent.get_ports(child_device.id, Port.ETHERNET_UNI)
+        port = next((port for port in ports if port.port_no == logical_port_number), None)
+        logical_port = self.adapter_agent.get_logical_port(self.logical_device_id,
+                                                           port.label)
+        ofp_port_name = (logical_port.ofp_port.name, logical_port.ofp_port.port_no)
+
+        return ofp_port_name
+
+    @inlineCallbacks
+    def enumerate_northbound_ports(self, device):
+        """
+        Enumerate all northbound ports of this device.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :return: (Deferred or None).
+        """
+        try:
+            # Also get the MAC Address for the OLT
+            command = "ip link | grep -A1 eth0 | sed -n -e 's/^.*ether //p' | awk '{ print $1 }'"
+            rcmd = RCmd(self.ip_address, self.netconf_username, self.netconf_password,
+                        command)
+            address = yield rcmd.execute()
+            self.mac_address = address.replace('\n', '')
+            self.log.info("mac-addr", mac_addr=self.mac_address)
+
+        except Exception as e:
+            log.exception('mac-address', e=e)
+            raise
+
+        try:
+            from codec.ietf_interfaces import IetfInterfacesState
+            from nni_port import MockNniPort
+
+            ietf_interfaces = IetfInterfacesState(self.netconf_client)
+
+            if self.is_virtual_olt:
+                results = MockNniPort.get_nni_port_state_results()
+            else:
+                self.startup = ietf_interfaces.get_state()
+                results = yield self.startup
+
+            ports = ietf_interfaces.get_port_entries(results, 'ethernet')
+            returnValue(ports)
+
+        except Exception as e:
+            log.exception('enumerate_northbound_ports', e=e)
+            raise
+
+    def process_northbound_ports(self, device, results):
+        """
+        Process the results from the 'enumerate_northbound_ports' method.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :param results: Results from the 'enumerate_northbound_ports' method that
+                you implemented. The type and contents are up to you to
+        :return: (Deferred or None).
+        """
+        from nni_port import NniPort, MockNniPort
+
+        for port in results.itervalues():
+            port_no = port.get('port_no')
+            assert port_no, 'Port number not found'
+
+            # May already exist if device was not fully reachable when first enabled
+            if port_no not in self.northbound_ports:
+                self.log.info('processing-nni', port_no=port_no, name=port['port_no'])
+                self.northbound_ports[port_no] = NniPort(self, **port) if not self.is_virtual_olt \
+                    else MockNniPort(self, **port)
+
+            if len(self.northbound_ports) >= self.max_nni_ports: # TODO: For now, limit number of NNI ports to make debugging easier
+                break
+
+        self.num_northbound_ports = len(self.northbound_ports)
+
+    def _olt_version(self):
+        #  Version
+        #     0     Unknown
+        #     1     V1 OMCI format
+        #     2     V2 OMCI format
+        #     3     2018-01-11 or later
+        version = 0
+        info = self._rest_support.get('module-info', [dict()])
+        hw_mod_ver_str = next((mod.get('revision') for mod in info
+                               if mod.get('module-name', '').lower() == 'gpon-olt-hw'), None)
+
+        if hw_mod_ver_str is not None:
+            try:
+                from datetime import datetime
+                hw_mod_dt = datetime.strptime(hw_mod_ver_str, '%Y-%m-%d')
+                version = 2 if hw_mod_dt >= datetime(2017, 9, 21) else 2
+
+            except Exception as e:
+                self.log.exception('ver-str-check', e=e)
+
+        return version
+
+    @inlineCallbacks
+    def enumerate_southbound_ports(self, device):
+        """
+        Enumerate all southbound ports of this device.
+
+        :param device: A voltha.Device object, with possible device-type
+                       specific extensions.
+        :return: (Deferred or None).
+        """
+        ###############################################################################
+        # Determine number of southbound ports. We know it is 16, but this keeps this
+        # device adapter generic for our other OLTs up to this point.
+
+        self.startup = self.rest_client.request('GET', self.GPON_PON_CONFIG_LIST_URI,
+                                                'pon-config')
+        try:
+            from codec.ietf_interfaces import IetfInterfacesState
+            from nni_port import MockNniPort
+
+            results = yield self.startup
+
+            ietf_interfaces = IetfInterfacesState(self.netconf_client)
+
+            if self.is_virtual_olt:
+                nc_results = MockNniPort.get_pon_port_state_results()
+            else:
+                self.startup = ietf_interfaces.get_state()
+                nc_results = yield self.startup
+
+            ports = ietf_interfaces.get_port_entries(nc_results, 'xpon')
+            if len(ports) == 0:
+                ports = ietf_interfaces.get_port_entries(nc_results,
+                                                         'channel-termination')
+            for data in results:
+                pon_id = data['pon-id']
+                port = ports[pon_id + 1]
+                port['pon-id'] = pon_id
+                port['admin_state'] = AdminState.ENABLED \
+                    if data.get('enabled', True)\
+                    else AdminState.DISABLED
+
+        except Exception as e:
+            log.exception('enumerate_southbound_ports', e=e)
+            raise
+
+        returnValue(ports)
+
+    def process_southbound_ports(self, device, results):
+        """
+        Process the results from the 'enumerate_southbound_ports' method.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions.
+        :param results: Results from the 'enumerate_southbound_ports' method that
+                you implemented. The type and contents are up to you to
+        :return: (Deferred or None).
+        """
+        from pon_port import PonPort
+
+        for pon in results.itervalues():
+            pon_id = pon.get('pon-id')
+            assert pon_id is not None, 'PON ID not found'
+            if pon['ifIndex'] is None:
+                pon['port_no'] = self.pon_id_to_port_number(pon_id)
+            else:
+                pass        # Need to adjust ONU numbering !!!!
+
+            # May already exist if device was not fully reachable when first enabled
+            if pon_id not in self.southbound_ports:
+                self.southbound_ports[pon_id] = PonPort(self, **pon)
+
+        self.num_southbound_ports = len(self.southbound_ports)
+
+    def pon(self, pon_id):
+        return self.southbound_ports.get(pon_id)
+
+    def complete_device_specific_activation(self, device, reconciling):
+        """
+        Perform an initial network operation to discover the device hardware
+        and software version. Serial Number would be helpful as well.
+
+        This method is called from within the base class's activate generator.
+
+        :param device: A voltha.Device object, with possible device-type
+                specific extensions. Such extensions shall be described as part of
+                the device type specification returned by device_types().
+
+        :param reconciling: (boolean) True if taking over for another VOLTHA
+        """
+        # ZeroMQ clients
+        self._zmq_startup()
+
+        # Download support
+        self._download_deferred = reactor.callLater(0, self._get_download_protocols)
+
+        # Register for adapter messages
+        self.adapter_agent.register_for_inter_adapter_messages()
+
+        # PON Status
+        self.status_poll = reactor.callLater(5, self.poll_for_status)
+        return succeed('Done')
+
+    def on_heatbeat_alarm(self, active):
+        if not active:
+            self.ready_network_access()
+
+    @inlineCallbacks
+    def _get_download_protocols(self):
+        if self._download_protocols is None:
+            try:
+                config = '<filter>' + \
+                          '<file-servers-state xmlns="http://www.adtran.com/ns/yang/adtran-file-servers">' + \
+                           '<profiles>' + \
+                            '<supported-protocol/>' + \
+                           '</profiles>' + \
+                          '</file-servers-state>' + \
+                         '</filter>'
+
+                results = yield self.netconf_client.get(config)
+
+                result_dict = xmltodict.parse(results.data_xml)
+                entries = result_dict['data']['file-servers-state']['profiles']['supported-protocol']
+                self._download_protocols = [entry['#text'].split(':')[-1] for entry in entries
+                                            if '#text' in entry]
+
+            except Exception as e:
+                self.log.exception('protocols', e=e)
+                self._download_protocols = None
+                self._download_deferred = reactor.callLater(10, self._get_download_protocols)
+
+    @inlineCallbacks
+    def ready_network_access(self):
+        # Check for port status
+        command = 'netstat -pan | grep -i 0.0.0.0:{} |  wc -l'.format(self.pon_agent_port)
+        rcmd = RCmd(self.ip_address, self.netconf_username, self.netconf_password, command)
+
+        try:
+            self.log.debug('check-request', command=command)
+            results = yield rcmd.execute()
+            self.log.info('check-results', results=results, result_type=type(results))
+            create_it = int(results) != 1
+
+        except Exception as e:
+            self.log.exception('find', e=e)
+            create_it = True
+
+        if create_it:
+            def v1_method():
+                command = 'mkdir -p /etc/pon_agent; touch /etc/pon_agent/debug.conf; '
+                command += 'ps -ae | grep -i ngpon2_agent; '
+                command += 'service_supervisor stop ngpon2_agent; service_supervisor start ngpon2_agent; '
+                command += 'ps -ae | grep -i ngpon2_agent'
+
+                self.log.debug('create-request', command=command)
+                return RCmd(self.ip_address, self.netconf_username, self.netconf_password, command)
+
+            def v2_v3_method():
+                # Old V2 method
+                # For V2 images, want -> export ZMQ_LISTEN_ON_ANY_ADDRESS=1
+                # For V3+ images, want -> export AGENT_LISTEN_ON_ANY_ADDRESS=1
+
+                # V3 unifies listening port, compatible with v2
+                cmd = "sed --in-place '/add feature/aexport ZMQ_LISTEN_ON_ANY_ADDRESS=1' " \
+                      "/etc/ngpon2_agent/ngpon2_agent_feature_flags; "
+                cmd += "sed --in-place '/add feature/aexport AGENT_LISTEN_ON_ANY_ADDRESS=1' " \
+                      "/etc/ngpon2_agent/ngpon2_agent_feature_flags; "
+
+                # Note: 'ps' commands are to help decorate the logfile with useful info
+                cmd += 'ps -ae | grep -i ngpon2_agent; '
+                cmd += 'service_supervisor stop ngpon2_agent; service_supervisor start ngpon2_agent; '
+                cmd += 'ps -ae | grep -i ngpon2_agent'
+
+                self.log.debug('create-request', command=cmd)
+                return RCmd(self.ip_address, self.netconf_username, self.netconf_password, cmd)
+
+            # Look for version
+            next_run = 15
+            version = v2_v3_method    # NOTE: Only v2 or later supported.
+
+            if version is not None:
+                try:
+                    rcmd = version()
+                    results = yield rcmd.execute()
+                    self.log.info('create-results', results=results, result_type=type(results))
+
+                except Exception as e:
+                    self.log.exception('mkdir-and-restart', e=e)
+        else:
+            next_run = 0
+
+        if next_run > 0:
+            self._ssh_deferred = reactor.callLater(next_run, self.ready_network_access)
+
+        returnValue('retrying' if next_run > 0 else 'ready')
+
+    def _zmq_startup(self):
+        # ZeroMQ clients
+        self._pon_agent = PonClient(self.ip_address,
+                                    port=self.pon_agent_port,
+                                    rx_callback=self.rx_pa_packet)
+
+        try:
+            self._pio_agent = PioClient(self.ip_address,
+                                        port=self.pio_port,
+                                        rx_callback=self.rx_pio_packet)
+        except Exception as e:
+            self._pio_agent = None
+            self.log.exception('pio-agent', e=e)
+
+    def _zmq_shutdown(self):
+        pon, self._pon_agent = self._pon_agent, None
+        pio, self._pio_agent = self._pio_agent, None
+
+        for c in [pon, pio]:
+            if c is not None:
+                try:
+                    c.shutdown()
+                except:
+                    pass
+
+    def _unregister_for_inter_adapter_messages(self):
+        try:
+            self.adapter_agent.unregister_for_inter_adapter_messages()
+        except:
+            pass
+
+    def disable(self):
+        self._cancel_deferred()
+
+        # Drop registration for adapter messages
+        self._unregister_for_inter_adapter_messages()
+        self._zmq_shutdown()
+        self._pio_exception_map = []
+
+        super(AdtranOltHandler, self).disable()
+
+    def reenable(self, done_deferred=None):
+        super(AdtranOltHandler, self).reenable(done_deferred=done_deferred)
+
+        # Only do the re-enable if we fully came up on the very first enable attempt.
+        # If we had not, the base class will have initiated the 'activate' for us
+
+        if self._initial_enable_complete:
+            self._zmq_startup()
+            self.adapter_agent.register_for_inter_adapter_messages()
+            self.status_poll = reactor.callLater(1, self.poll_for_status)
+
+    def reboot(self):
+        if not self._initial_enable_complete:
+            # Never contacted the device on the initial startup, do 'activate' steps instead
+            return
+
+        self._cancel_deferred()
+
+        # Drop registration for adapter messages
+        self._unregister_for_inter_adapter_messages()
+        self._zmq_shutdown()
+
+        # Download supported protocols may change (if new image gets activated)
+        self._download_protocols = None
+
+        super(AdtranOltHandler, self).reboot()
+
+    def _finish_reboot(self, timeout, previous_oper_status, previous_conn_status):
+        super(AdtranOltHandler, self)._finish_reboot(timeout, previous_oper_status, previous_conn_status)
+
+        self.ready_network_access()
+
+        # Download support
+        self._download_deferred = reactor.callLater(0, self._get_download_protocols)
+
+        # Register for adapter messages
+        self.adapter_agent.register_for_inter_adapter_messages()
+        self._zmq_startup()
+
+        self.status_poll = reactor.callLater(5, self.poll_for_status)
+
+    def delete(self):
+        self._cancel_deferred()
+
+        # Drop registration for adapter messages
+        self._unregister_for_inter_adapter_messages()
+        self._zmq_shutdown()
+
+        super(AdtranOltHandler, self).delete()
+
+    def rx_pa_packet(self, packets):
+        if self._pon_agent is not None:
+            for packet in packets:
+                try:
+                    pon_id, onu_id, msg_bytes, is_omci = self._pon_agent.decode_packet(packet)
+
+                    if is_omci:
+                        proxy_address = self._pon_onu_id_to_proxy_address(pon_id, onu_id)
+
+                        if proxy_address is not None:
+                            self.adapter_agent.receive_proxied_message(proxy_address, msg_bytes)
+
+                except Exception as e:
+                    self.log.exception('rx-pon-agent-packet', e=e)
+
+    def _compute_logical_port_no(self, port_no, evc_map, packet):
+        logical_port_no = None
+
+        # Upstream direction?
+        if self.is_pon_port(port_no):
+            #TODO: Validate the evc-map name
+            from python.adapters.adtran.adtran_common.flow.evc_map import EVCMap
+            map_info = EVCMap.decode_evc_map_name(evc_map)
+            logical_port_no = int(map_info.get('ingress-port'))
+
+            if logical_port_no is None:
+                # Get PON
+                pon = self.get_southbound_port(port_no)
+
+                # Examine Packet and decode gvid
+                if packet is not None:
+                    pass
+
+        elif self.is_nni_port(port_no):
+            nni = self.get_northbound_port(port_no)
+            logical_port = nni.get_logical_port() if nni is not None else None
+            logical_port_no = logical_port.ofp_port.port_no if logical_port is not None else None
+
+        # TODO: Need to decode base on port_no & evc_map
+        return logical_port_no
+
+    def rx_pio_packet(self, packets):
+        self.log.debug('rx-packet-in', type=type(packets), data=packets)
+        assert isinstance(packets, list), 'Expected a list of packets'
+
+        # TODO self._pio_agent.socket.socket.closed might be a good check here as well
+        if self.logical_device_id is not None and self._pio_agent is not None:
+            for packet in packets:
+                url_type = self._pio_agent.get_url_type(packet)
+                if url_type == PioClient.UrlType.EVCMAPS_RESPONSE:
+                    exception_map = self._pio_agent.decode_query_response_packet(packet)
+                    self.log.debug('rx-pio-packet', exception_map=exception_map)
+                    # update latest pio exception map
+                    self._pio_exception_map = exception_map
+
+                elif url_type == PioClient.UrlType.PACKET_IN:
+                    try:
+                        from scapy.layers.l2 import Ether, Dot1Q
+                        ifindex, evc_map, packet = self._pio_agent.decode_packet(packet)
+
+                        # convert ifindex to physical port number
+                        # pon port numbers start at 60001 and end at 600016 (16 pons)
+                        if ifindex > 60000 and ifindex < 60017:
+                            port_no = (ifindex - 60000) + 4
+                        # nni port numbers start at 1401 and end at 1404 (16 nnis)
+                        elif ifindex > 1400 and ifindex < 1405:
+                            port_no = ifindex - 1400
+                        else:
+                            raise ValueError('Unknown physical port. ifindex: {}'.format(ifindex))
+
+                        logical_port_no = self._compute_logical_port_no(port_no, evc_map, packet)
+
+                        if logical_port_no is not None:
+                            if self.is_pon_port(port_no) and packet.haslayer(Dot1Q):
+                                # Scrub g-vid
+                                inner_pkt = packet.getlayer(Dot1Q)
+                                assert inner_pkt.haslayer(Dot1Q), 'Expected a C-Tag'
+                                packet = Ether(src=packet.src, dst=packet.dst, type=inner_pkt.type)\
+                                    / inner_pkt.payload
+
+                            self.adapter_agent.send_packet_in(logical_device_id=self.logical_device_id,
+                                                              logical_port_no=logical_port_no,
+                                                              packet=str(packet))
+                        else:
+                            self.log.warn('logical-port-not-found', port_no=port_no, evc_map=evc_map)
+
+                    except Exception as e:
+                        self.log.exception('rx-pio-packet', e=e)
+
+                else:
+                    self.log.warn('packet-in-unknown-url-type', url_type=url_type)
+
+    def packet_out(self, egress_port, msg):
+        """
+        Pass a packet_out message content to adapter so that it can forward it
+        out to the device. This is only called on root devices.
+
+        :param egress_port: egress logical port number
+        :param msg: actual message
+        :return: None        """
+
+        if self.pio_port is not None:
+            from scapy.layers.l2 import Ether, Dot1Q
+            from scapy.layers.inet import UDP
+
+            self.log.debug('sending-packet-out', egress_port=egress_port,
+                           msg=hexify(msg))
+            pkt = Ether(msg)
+
+            # Remove any extra tags
+            while pkt.type == 0x8100:
+                msg_hex = hexify(msg)
+                msg_hex = msg_hex[:24] + msg_hex[32:]
+                bytes = []
+                msg_hex = ''.join(msg_hex.split(" "))
+                for i in range(0, len(msg_hex), 2):
+                    bytes.append(chr(int(msg_hex[i:i+2], 16)))
+
+                msg = ''.join(bytes)
+                pkt = Ether(msg)
+
+            if self._pio_agent is not None:
+                port, ctag, vlan_id, evcmapname = FlowEntry.get_packetout_info(self, egress_port)
+                exceptiontype = None
+                if pkt.type == FlowEntry.EtherType.EAPOL:
+                    exceptiontype = 'eapol'
+                    ctag = self.utility_vlan
+                elif pkt.type == 2:
+                    exceptiontype = 'igmp'
+                elif pkt.type == FlowEntry.EtherType.IPv4:
+                    if UDP in pkt and pkt[UDP].sport == 67 and pkt[UDP].dport == 68:
+                        exceptiontype = 'dhcp'
+
+                if exceptiontype is None:
+                    self.log.warn('packet-out-exceptiontype-unknown', eEtherType=pkt.type)
+
+                elif port is not None and ctag is not None and vlan_id is not None and \
+                     evcmapname is not None and self.pio_exception_exists(evcmapname, exceptiontype):
+
+                    self.log.debug('sending-pio-packet-out', port=port, ctag=ctag, vlan_id=vlan_id,
+                                   evcmapname=evcmapname, exceptiontype=exceptiontype)
+                    out_pkt = (
+                        Ether(src=pkt.src, dst=pkt.dst) /
+                        Dot1Q(vlan=vlan_id) /
+                        Dot1Q(vlan=ctag, type=pkt.type) /
+                        pkt.payload
+                    )
+                    data = self._pio_agent.encode_packet(port, str(out_pkt), evcmapname, exceptiontype)
+                    self.log.debug('pio-packet-out', message=data)
+                    try:
+                        self._pio_agent.send(data)
+
+                    except Exception as e:
+                        self.log.exception('pio-send', egress_port=egress_port, e=e)
+                else:
+                    self.log.warn('packet-out-flow-not-found', egress_port=egress_port)
+
+    def pio_exception_exists(self, name, exp):
+        # verify exception is in the OLT's reported exception map for this evcmap name
+        if exp is None:
+            return False
+        entry = next((entry for entry in self._pio_exception_map if entry['evc-map-name'] == name), None)
+        if entry is None:
+            return False
+        if exp not in entry['exception-types']:
+            return False
+        return True
+
+    def send_packet_exceptions_request(self):
+        if self._pio_agent is not None:
+            request = self._pio_agent.query_request_packet()
+            try:
+                self._pio_agent.send(request)
+
+            except Exception as e:
+                self.log.exception('pio-send', e=e)
+
+    def poll_for_status(self):
+        self.log.debug('Initiating-status-poll')
+
+        device = self.adapter_agent.get_device(self.device_id)
+
+        if device.admin_state == AdminState.ENABLED and\
+                device.oper_status != OperStatus.ACTIVATING and\
+                self.rest_client is not None:
+            uri = AdtranOltHandler.GPON_OLT_HW_STATE_URI
+            name = 'pon-status-poll'
+            self.status_poll = self.rest_client.request('GET', uri, name=name)
+            self.status_poll.addBoth(self.status_poll_complete)
+        else:
+            self.status_poll = reactor.callLater(0, self.status_poll_complete, 'inactive')
+
+    def status_poll_complete(self, results):
+        """
+        Results of the status poll
+        :param results:
+        """
+        from pon_port import PonPort
+
+        if isinstance(results, dict) and 'pon' in results:
+            try:
+                self.log.debug('status-success')
+                for pon_id, pon in OltState(results).pons.iteritems():
+                    pon_port = self.southbound_ports.get(pon_id, None)
+
+                    if pon_port is not None and pon_port.state == PonPort.State.RUNNING:
+                        pon_port.process_status_poll(pon)
+
+            except Exception as e:
+                self.log.exception('PON-status-poll', e=e)
+
+        # Reschedule
+
+        delay = self.status_poll_interval
+        delay += random.uniform(-delay / 10, delay / 10)
+
+        self.status_poll = reactor.callLater(delay, self.poll_for_status)
+
+    def _create_utility_flow(self):
+        nni_port = self.northbound_ports.get(1).port_no
+        pon_port = self.southbound_ports.get(0).port_no
+
+        return mk_flow_stat(
+            priority=200,
+            match_fields=[
+                in_port(nni_port),
+                vlan_vid(ofp.OFPVID_PRESENT + self.utility_vlan)
+            ],
+            actions=[output(pon_port)]
+        )
+
+    @inlineCallbacks
+    def update_flow_table(self, flows, device):
+        """
+        Update the flow table on the OLT.  If an existing flow is not in the list, it needs
+        to be removed from the device.
+
+        :param flows: List of flows that should be installed upon completion of this function
+        :param device: A voltha.Device object, with possible device-type
+                       specific extensions.
+        """
+        self.log.debug('bulk-flow-update', num_flows=len(flows),
+                       device_id=device.id, flows=flows)
+
+        valid_flows = []
+
+        if flows:
+            # Special helper egress Packet In/Out flows
+            special_flow = self._create_utility_flow()
+            valid_flow, evc = FlowEntry.create(special_flow, self)
+
+            if valid_flow is not None:
+                valid_flows.append(valid_flow.flow_id)
+
+            if evc is not None:
+                try:
+                    evc.schedule_install()
+                    self.add_evc(evc)
+
+                except Exception as e:
+                    evc.status = 'EVC Install Exception: {}'.format(e.message)
+                    self.log.exception('EVC-install', e=e)
+
+        # verify exception flows were installed by OLT PET process
+        reactor.callLater(5, self.send_packet_exceptions_request)
+
+        # Now process bulk flows
+        for flow in flows:
+            try:
+                # Try to create an EVC.
+                #
+                # The first result is the flow entry that was created. This could be a match to an
+                # existing flow since it is a bulk update.  None is returned only if no match to
+                # an existing entry is found and decode failed (unsupported field)
+                #
+                # The second result is the EVC this flow should be added to. This could be an
+                # existing flow (so your adding another EVC-MAP) or a brand new EVC (no existing
+                # EVC-MAPs).  None is returned if there are not a valid EVC that can be created YET.
+
+                valid_flow, evc = FlowEntry.create(flow, self)
+
+                if valid_flow is not None:
+                    valid_flows.append(valid_flow.flow_id)
+
+                if evc is not None:
+                    try:
+                        evc.schedule_install()
+                        self.add_evc(evc)
+
+                    except Exception as e:
+                        evc.status = 'EVC Install Exception: {}'.format(e.message)
+                        self.log.exception('EVC-install', e=e)
+
+            except Exception as e:
+                self.log.exception('bulk-flow-update-add', e=e)
+
+        # Now drop all flows from this device that were not in this bulk update
+        try:
+            yield FlowEntry.drop_missing_flows(self, valid_flows)
+
+        except Exception as e:
+            self.log.exception('bulk-flow-update-remove', e=e)
+
+    def remove_from_flow_table(self, _flows):
+        """
+        Remove flows from the device
+
+        :param _flows: (list) Flows
+        """
+        raise NotImplementedError
+
+    def add_to_flow_table(self, _flows):
+        """
+        Remove flows from the device
+
+        :param _flows: (list) Flows
+        """
+        raise NotImplementedError
+
+    def get_ofp_device_info(self, device):
+        """
+        Retrieve the OLT device info. This includes the ofp_desc and
+        ofp_switch_features. The existing ofp structures can be used,
+        or all the attributes get added to the Device definition or a new proto
+        definition gets created. This API will allow the Core to create a
+        LogicalDevice associated with this device (OLT only).
+        :param device: device
+        :return: Proto Message (TBD)
+        """
+        from pyvoltha.protos.inter_container_pb2 import SwitchCapability
+        version = device.images.image[0].version
+
+        return SwitchCapability(
+            desc=ofp_desc(mfr_desc='VOLTHA Project',
+                          hw_desc=device.hardware_version,
+                          sw_desc=version,
+                          serial_num=device.serial_number,
+                          dp_desc='n/a'),
+            switch_features=ofp_switch_features(n_buffers=256,   # TODO fake for now
+                                                n_tables=2,      # TODO ditto
+                                                capabilities=(   # TODO and ditto
+                                                    OFPC_FLOW_STATS |
+                                                    OFPC_TABLE_STATS |
+                                                    OFPC_PORT_STATS |
+                                                    OFPC_GROUP_STATS))
+        )
+
+    def get_ofp_port_info(self, device, port_no):
+        """
+        Retrieve the port info. This includes the ofp_port. The existing ofp
+        structure can be used, or all the attributes get added to the Port
+        definitions or a new proto definition gets created.  This API will allow
+        the Core to create a LogicalPort associated with this device.
+        :param device: device
+        :param port_no: port number
+        :return: Proto Message (TBD)
+        """
+        from pyvoltha.protos.inter_container_pb2 import PortCapability
+        # Since the adapter created the device port then it has the reference of the port to
+        # return the capability.   TODO:  Do a lookup on the NNI port number and return the
+        # appropriate attributes
+        self.log.info('get_ofp_port_info', port_no=port_no,
+                      info=self.ofp_port_no, device_id=device.id)
+
+        nni = self.get_northbound_port(port_no)
+        if nni is not None:
+            lp = nni.get_logical_port()
+            if lp is not None:
+                return PortCapability(port=lp)
+
+    # @inlineCallbacks
+    def send_proxied_message(self, proxy_address, msg):
+        self.log.debug('sending-proxied-message', msg=msg)
+
+        if isinstance(msg, Packet):
+            msg = str(msg)
+
+        if self._pon_agent is not None:
+            pon_id, onu_id = self._proxy_address_to_pon_onu_id(proxy_address)
+
+            pon = self.southbound_ports.get(pon_id)
+
+            if pon is not None and pon.enabled:
+                onu = pon.onu(onu_id)
+
+                if onu is not None and onu.enabled:
+                    data = self._pon_agent.encode_omci_packet(msg, pon_id, onu_id)
+                    try:
+                        self._pon_agent.send(data)
+
+                    except Exception as e:
+                        self.log.exception('pon-agent-send', pon_id=pon_id, onu_id=onu_id, e=e)
+                else:
+                    self.log.debug('onu-invalid-or-disabled', pon_id=pon_id, onu_id=onu_id)
+            else:
+                self.log.debug('pon-invalid-or-disabled', pon_id=pon_id)
+
+    def _onu_offset(self, onu_id):
+        # Start ONU's just past the southbound PON port numbers. Since ONU ID's start
+        # at zero, add one
+        # assert AdtranOltHandler.BASE_ONU_OFFSET > (self.num_northbound_ports + self.num_southbound_ports + 1)
+        assert AdtranOltHandler.BASE_ONU_OFFSET > (4 + self.num_southbound_ports + 1)  # Skip over uninitialized ports
+        return AdtranOltHandler.BASE_ONU_OFFSET + onu_id
+
+    def _pon_onu_id_to_proxy_address(self, pon_id, onu_id):
+        if pon_id in self.southbound_ports:
+            pon = self.southbound_ports[pon_id]
+            onu = pon.onu(onu_id)
+            proxy_address = onu.proxy_address if onu is not None else None
+
+        else:
+            proxy_address = None
+
+        return proxy_address
+
+    def _proxy_address_to_pon_onu_id(self, proxy_address):
+        """
+        Convert the proxy address to the PON-ID and ONU-ID
+        :param proxy_address: (ProxyAddress)
+        :return: (tuple) pon-id, onu-id
+        """
+        onu_id = proxy_address.onu_id
+        pon_id = self._port_number_to_pon_id(proxy_address.channel_id)
+
+        return pon_id, onu_id
+
+    def pon_id_to_port_number(self, pon_id):
+        return pon_id + 1 + 4   # Skip over uninitialized ports
+
+    def _port_number_to_pon_id(self, port):
+        if self.is_uni_port(port):
+            # Convert to OLT device port
+            port = platform.intf_id_from_uni_port_num(port)
+
+        return port - 1 - 4  # Skip over uninitialized ports
+
+    def is_pon_port(self, port):
+        return self._port_number_to_pon_id(port) in self.southbound_ports
+
+    def is_uni_port(self, port):
+            return OFPP_MAX >= port >= (5 << 11)
+
+    def get_southbound_port(self, port):
+        pon_id = self._port_number_to_pon_id(port)
+        return self.southbound_ports.get(pon_id, None)
+
+    def get_northbound_port(self, port):
+        return self.northbound_ports.get(port, None)
+
+    def get_port_name(self, port, logical_name=False):
+        """
+        Get the name for a port
+
+        Port names are used in various ways within and outside of VOLTHA.
+        Typically, the physical port name will be used during device handler conversations
+        with the hardware (REST, NETCONF, ...) while the logical port name is what the
+        outside world (ONOS, SEBA, ...) uses.
+
+        All ports have a physical port name, but only ports exposed through VOLTHA
+        as a logical port will have a logical port name
+        """
+        if self.is_nni_port(port):
+            port = self.get_northbound_port(port)
+            return port.logical_port_name if logical_name else port.physical_port_name
+
+        if self.is_pon_port(port):
+            port = self.get_southbound_port(port)
+            return port.logical_port_name if logical_name else port.physical_port_name
+
+        if self.is_uni_port(port):
+            return 'uni-{}'.format(port)
+
+        if self.is_logical_port(port):
+            raise NotImplemented('Logical OpenFlow ports are not supported')
+
+    def _update_download_status(self, request, download):
+        if download is not None:
+            request.state = download.download_state
+            request.reason = download.failure_reason
+            request.image_state = download.image_state
+            request.additional_info = download.additional_info
+            request.downloaded_bytes = download.downloaded_bytes
+        else:
+            request.state = ImageDownload.DOWNLOAD_UNKNOWN
+            request.reason = ImageDownload.UNKNOWN_ERROR
+            request.image_state = ImageDownload.IMAGE_UNKNOWN
+            request.additional_info = "Download request '{}' not found".format(request.name)
+            request.downloaded_bytes = 0
+
+        self.adapter_agent.update_image_download(request)
+
+    def start_download(self, device, request, done):
+        """
+        This is called to request downloading a specified image into
+        the standby partition of a device based on a NBI call.
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :param done: (Deferred) Deferred to fire when done
+        :return: (Deferred) Shall be fired to acknowledge the download.
+        """
+        log.info('image_download', request=request)
+
+        try:
+            if not self._initial_enable_complete:
+                # Never contacted the device on the initial startup, do 'activate' steps instead
+                raise Exception('Device has not finished initial activation')
+
+            if request.name in self._downloads:
+                raise Exception("Download request with name '{}' already exists".
+                                format(request.name))
+            try:
+                download = Download.create(self, request, self._download_protocols)
+
+            except Exception:
+                request.additional_info = 'Download request creation failed due to exception'
+                raise
+
+            try:
+                self._downloads[download.name] = download
+                self._update_download_status(request, download)
+                done.callback('started')
+                return done
+
+            except Exception:
+                request.additional_info = 'Download request startup failed due to exception'
+                del self._downloads[download.name]
+                download.cancel_download(request)
+                raise
+
+        except Exception as e:
+            self.log.exception('create', e=e)
+
+            request.reason = ImageDownload.UNKNOWN_ERROR if self._initial_enable_complete\
+                else ImageDownload.DEVICE_BUSY
+            request.state = ImageDownload.DOWNLOAD_FAILED
+            if not request.additional_info:
+                request.additional_info = e.message
+
+            self.adapter_agent.update_image_download(request)
+
+            # restore admin state to enabled
+            device.admin_state = AdminState.ENABLED
+            self.adapter_agent.update_device(device)
+            raise
+
+    def download_status(self, device, request, done):
+        """
+        This is called to inquire about a requested image download status based
+        on a NBI call.
+
+        The adapter is expected to update the DownloadImage DB object with the
+        query result
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :param done: (Deferred) Deferred to fire when done
+
+        :return: (Deferred) Shall be fired to acknowledge
+        """
+        log.info('download_status', request=request)
+        download = self._downloads.get(request.name)
+
+        self._update_download_status(request, download)
+
+        if request.state not in [ImageDownload.DOWNLOAD_STARTED,
+                                 ImageDownload.DOWNLOAD_SUCCEEDED,
+                                 ImageDownload.DOWNLOAD_FAILED]:
+            # restore admin state to enabled
+            device.admin_state = AdminState.ENABLED
+            self.adapter_agent.update_device(device)
+
+        done.callback(request.state)
+        return done
+
+    def cancel_download(self, device, request, done):
+        """
+        This is called to cancel a requested image download based on a NBI
+        call.  The admin state of the device will not change after the
+        download.
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :param done: (Deferred) Deferred to fire when done
+
+        :return: (Deferred) Shall be fired to acknowledge
+        """
+        log.info('cancel_download', request=request)
+
+        download = self._downloads.get(request.name)
+
+        if download is not None:
+            del self._downloads[request.name]
+            result = download.cancel_download(request)
+            self._update_download_status(request, download)
+            done.callback(result)
+        else:
+            self._update_download_status(request, download)
+            done.errback(KeyError('Download request not found'))
+
+        if device.admin_state == AdminState.DOWNLOADING_IMAGE:
+            device.admin_state = AdminState.ENABLED
+            self.adapter_agent.update_device(device)
+
+        return done
+
+    def activate_image(self, device, request, done):
+        """
+        This is called to activate a downloaded image from a standby partition
+        into active partition.
+
+        Depending on the device implementation, this call may or may not
+        cause device reboot. If no reboot, then a reboot is required to make
+        the activated image running on device
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :param done: (Deferred) Deferred to fire when done
+
+        :return: (Deferred) OperationResponse object.
+        """
+        log.info('activate_image', request=request)
+
+        download = self._downloads.get(request.name)
+        if download is not None:
+            del self._downloads[request.name]
+            result = download.activate_image()
+            self._update_download_status(request, download)
+            done.callback(result)
+        else:
+            self._update_download_status(request, download)
+            done.errback(KeyError('Download request not found'))
+
+        # restore admin state to enabled
+        device.admin_state = AdminState.ENABLED
+        self.adapter_agent.update_device(device)
+        return done
+
+    def revert_image(self, device, request, done):
+        """
+        This is called to deactivate the specified image at active partition,
+        and revert to previous image at standby partition.
+
+        Depending on the device implementation, this call may or may not
+        cause device reboot. If no reboot, then a reboot is required to
+        make the previous image running on device
+
+        :param device: A Voltha.Device object.
+        :param request: A Voltha.ImageDownload object.
+        :param done: (Deferred) Deferred to fire when done
+
+        :return: (Deferred) OperationResponse object.
+        """
+        log.info('revert_image', request=request)
+
+        download = self._downloads.get(request.name)
+        if download is not None:
+            del self._downloads[request.name]
+            result = download.revert_image()
+            self._update_download_status(request, download)
+            done.callback(result)
+        else:
+            self._update_download_status(request, download)
+            done.errback(KeyError('Download request not found'))
+
+        # restore admin state to enabled
+        device.admin_state = AdminState.ENABLED
+        self.adapter_agent.update_device(device)
+        return done
+
+    def add_onu_device(self, pon_id, onu_id, serial_number):
+        onu_device = self.adapter_agent.get_child_device(self.device_id,
+                                                         serial_number=serial_number)
+        if onu_device is not None:
+            return onu_device
+
+        try:
+            # NOTE - channel_id of onu is set to pon_id
+            pon_port = self.pon_id_to_port_number(pon_id)
+            proxy_address = Device.ProxyAddress(device_id=self.device_id,
+                                                channel_id=pon_port,
+                                                onu_id=onu_id,
+                                                onu_session_id=onu_id)
+
+            self.log.debug("added-onu", port_no=pon_id,
+                           onu_id=onu_id, serial_number=serial_number,
+                           proxy_address=proxy_address)
+
+            self.adapter_agent.add_onu_device(
+                parent_device_id=self.device_id,
+                parent_port_no=pon_port,
+                vendor_id=serial_number[:4],
+                proxy_address=proxy_address,
+                root=True,
+                serial_number=serial_number,
+                admin_state=AdminState.ENABLED,
+            )
+
+        except Exception as e:
+            self.log.exception('onu-activation-failed', e=e)
+            return None
+
+    def setup_onu_tech_profile(self, pon_id, onu_id, logical_port_number):
+        # Send ONU Adapter related tech profile information.
+        self.log.debug('add-tech-profile-info')
+
+        uni_id = self.platform.uni_id_from_uni_port(logical_port_number)
+        parent_port_no = self.pon_id_to_port_number(pon_id)
+        onu_device = self.adapter_agent.get_child_device(self.device_id,
+                                                         onu_id=onu_id,
+                                                         parent_port_no=parent_port_no)
+
+        ofp_port_name, ofp_port_no = self.get_ofp_port_name(pon_id, onu_id,
+                                                            logical_port_number)
+        if ofp_port_name is None:
+            self.log.error("port-name-not-found")
+            return
+
+        tp_path = self.get_tp_path(pon_id, ofp_port_name)
+
+        self.log.debug('Load-tech-profile-request-to-onu-handler', tp_path=tp_path)
+
+        msg = {'proxy_address': onu_device.proxy_address, 'uni_id': uni_id,
+               'event': 'download_tech_profile', 'event_data': tp_path}
+
+        # Send the event message to the ONU adapter
+        self.adapter_agent.publish_inter_adapter_message(onu_device.id, msg)
diff --git a/adapters/adtran_olt/codec/__init__.py b/adapters/adtran_olt/codec/__init__.py
new file mode 100644
index 0000000..b0fb0b2
--- /dev/null
+++ b/adapters/adtran_olt/codec/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_olt/codec/ietf_interfaces.py b/adapters/adtran_olt/codec/ietf_interfaces.py
new file mode 100644
index 0000000..0bdf691
--- /dev/null
+++ b/adapters/adtran_olt/codec/ietf_interfaces.py
@@ -0,0 +1,328 @@
+# CCopyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from twisted.internet.defer import inlineCallbacks, returnValue
+import xmltodict
+import structlog
+from pyvoltha.protos.openflow_13_pb2 import OFPPF_1GB_FD, OFPPF_10GB_FD, OFPPF_40GB_FD, OFPPF_100GB_FD
+from pyvoltha.protos.openflow_13_pb2 import OFPPF_FIBER, OFPPF_COPPER
+from pyvoltha.protos.openflow_13_pb2 import OFPPS_LIVE, OFPPC_PORT_DOWN, OFPPS_LINK_DOWN, OFPPF_OTHER
+from pyvoltha.protos.common_pb2 import OperStatus, AdminState
+
+log = structlog.get_logger()
+
+_ietf_interfaces_config_rpc = """
+    <filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
+      <interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+        <interface/>
+      </interfaces>
+    </filter>
+"""
+
+_ietf_interfaces_state_rpc = """
+    <filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
+      <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+        <interface>
+          <name/>
+          <type/>
+          <admin-status/>
+          <oper-status/>
+          <last-change/>
+          <phys-address/>
+          <speed/>
+        </interface>
+      </interfaces-state>
+    </filter>
+"""
+
+_allowed_with_default_types = ['report-all', 'report-all-tagged', 'trim', 'explicit']
+
+# TODO: Centralize the item below as a function in a core util module
+
+
+def _with_defaults(default_type=None):
+    if default_type is None:
+        return ""
+
+    assert(default_type in _allowed_with_default_types)
+    return """
+    <with-defaults xmlns="urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults">
+        {}</with-defaults>""".format(default_type)
+
+
+class IetfInterfacesConfig(object):
+    def __init__(self, session):
+        self._session = session
+
+    @inlineCallbacks
+    def get_config(self, source='running', with_defaults=None):
+
+        filter = _ietf_interfaces_config_rpc + _with_defaults(with_defaults)
+
+        request = self._session.get(source, filter=filter)
+        rpc_reply = yield request
+        returnValue(rpc_reply)
+
+    def get_interfaces(self, rpc_reply, interface_type=None):
+        """
+        Get the physical entities of a particular type
+        :param rpc_reply: Reply from previous get or request
+        :param interface_type: (String or List) The type of interface (case-insensitive)
+        :return: list) of OrderDict interface entries
+        """
+        result_dict = xmltodict.parse(rpc_reply.data_xml)
+
+        entries = result_dict['data']['interfaces']
+
+        if interface_type is None:
+            return entries
+
+        # for entry in entries:
+        #     import pprint
+        #     log.info(pprint.PrettyPrinter(indent=2).pformat(entry))
+
+        def _matches(entry, value):
+            if 'type' in entry and '#text' in entry['type']:
+                text_val = entry['type']['#text'].lower()
+                if isinstance(value, list):
+                    return any(v.lower() in text_val for v in value)
+                return value.lower() in text_val
+            return False
+
+        return [entry for entry in entries if _matches(entry, interface_type)]
+
+
+class IetfInterfacesState(object):
+    def __init__(self, session):
+        self._session = session
+
+    @inlineCallbacks
+    def get_state(self):
+        try:
+            request = self._session.get(_ietf_interfaces_state_rpc)
+            rpc_reply = yield request
+            returnValue(rpc_reply)
+
+        except Exception as e:
+            log.exception('get_state', e=e)
+            raise
+
+    @staticmethod
+    def get_interfaces(self, rpc_reply, key='type', key_value=None):
+        """
+        Get the physical entities of a particular type
+        :param key_value: (String or List) The type of interface (case-insensitive)
+        :return: list) of OrderDict interface entries
+        """
+        result_dict = xmltodict.parse(rpc_reply.data_xml)
+        entries = result_dict['data']['interfaces-state']['interface']
+
+        if key_value is None:
+            return entries
+
+        for entry in entries:
+            import pprint
+            log.info(pprint.PrettyPrinter(indent=2).pformat(entry))
+
+        def _matches(entry, key, value):
+            if key in entry and '#text' in entry[key]:
+                text_val = entry[key]['#text'].lower()
+                if isinstance(value, list):
+                    return any(v.lower() in text_val for v in value)
+                return value.lower() in text_val
+            return False
+
+        return [entry for entry in entries if _matches(entry, key, key_value)]
+
+    @staticmethod
+    def _get_admin_state(entry):
+        state_map = {
+            'up': AdminState.ENABLED,
+            'down': AdminState.DISABLED,
+            'testing': AdminState.DISABLED
+        }
+        return state_map.get(entry.get('admin-status', 'down'),
+                             AdminState.UNKNOWN)
+
+    @staticmethod
+    def _get_oper_status(entry):
+        state_map = {
+            'up': OperStatus.ACTIVE,
+            'down': OperStatus.FAILED,
+            'testing': OperStatus.TESTING,
+            'unknown': OperStatus.UNKNOWN,
+            'dormant': OperStatus.DISCOVERED,
+            'not-present': OperStatus.UNKNOWN,
+            'lower-layer-down': OperStatus.FAILED
+        }
+        return state_map.get(entry.get('oper-status', 'down'),
+                             OperStatus.UNKNOWN)
+
+    @staticmethod
+    def _get_mac_addr(entry):
+        mac_addr = entry.get('phys-address', None)
+        if mac_addr is None:
+            import random
+            # TODO: Get with qumram team about phys addr
+            mac_addr = '08:00:{}{}:{}{}:{}{}:00'.format(random.randint(0, 9),
+                                                        random.randint(0, 9),
+                                                        random.randint(0, 9),
+                                                        random.randint(0, 9),
+                                                        random.randint(0, 9),
+                                                        random.randint(0, 9))
+        return mac_addr
+
+    @staticmethod
+    def _get_speed_value(entry):
+        speed = entry.get('speed') or IetfInterfacesState._get_speed_via_name(entry.get('name'))
+        if isinstance(speed, str):
+            return long(speed)
+        return speed
+
+    @staticmethod
+    def _get_speed_via_name(name):
+        speed_map = {
+            'terabit':         1000000000000,
+            'hundred-gigabit':  100000000000,
+            'fourty-gigabit':    40000000000,
+            'ten-gigabit':       10000000000,
+            'gigabit':            1000000000,
+        }
+        for n,v in speed_map.iteritems():
+            if n in name.lower():
+                return v
+        return 0
+
+    @staticmethod
+    def _get_of_state(entry):
+        # If port up and ready: OFPPS_LIVE
+        # If port config bit is down: OFPPC_PORT_DOWN
+        # If port state bit is down: OFPPS_LINK_DOWN
+        # if IetfInterfacesState._get_admin_state(entry) == AdminState.ENABLED:
+        #     return OFPPS_LIVE \
+        #         if IetfInterfacesState._get_oper_status(entry) == OperStatus.ACTIVE \
+        #         else OFPPS_LINK_DOWN
+        #
+        # return OFPPC_PORT_DOWN
+        # TODO: Update of openflow port state is not supported, so always say we are alive
+        return OFPPS_LIVE
+
+    @staticmethod
+    def _get_of_capabilities(entry):
+        # The capabilities field is a bitmap that uses a combination of the following flags :
+        # Capabilities supported by the datapath
+        # enum ofp_capabilities {
+        #    OFPC_FLOW_STATS = 1 << 0,   /* Flow statistics. */
+        #    OFPC_TABLE_STATS = 1 << 1,  /* Table statistics. */
+        #    OFPC_PORT_STATS = 1 << 2,   /* Port statistics. */
+        #    OFPC_GROUP_STATS = 1 << 3,  /* Group statistics. */
+        #    OFPC_IP_REASM = 1 << 5,     /* Can reassemble IP fragments. */
+        #    OFPC_QUEUE_STATS = 1 << 6,  /* Queue statistics. */
+        #    OFPC_PORT_BLOCKED = 1 << 8, /* Switch will block looping ports. */
+        #    OFPC_BUNDLES = 1 << 9,      /* Switch supports bundles. */
+        #    OFPC_FLOW_MONITORING = 1 << 10, /* Switch supports flow monitoring. */
+        # }
+        # enum ofp_port_features {
+        #     OFPPF_10MB_HD = 1 << 0, /* 10 Mb half-duplex rate support. */
+        #     OFPPF_10MB_FD = 1 << 1, /* 10 Mb full-duplex rate support. */
+        #     OFPPF_100MB_HD = 1 << 2, /* 100 Mb half-duplex rate support. */
+        #     OFPPF_100MB_FD = 1 << 3, /* 100 Mb full-duplex rate support. */
+        #     OFPPF_1GB_HD = 1 << 4, /* 1 Gb half-duplex rate support. */
+        #     OFPPF_1GB_FD = 1 << 5, /* 1 Gb full-duplex rate support. */
+        #     OFPPF_10GB_FD = 1 << 6, /* 10 Gb full-duplex rate support. */
+        #     OFPPF_40GB_FD = 1 << 7, /* 40 Gb full-duplex rate support. */
+        #     OFPPF_100GB_FD = 1 << 8, /* 100 Gb full-duplex rate support. */
+        #     OFPPF_1TB_FD = 1 << 9, /* 1 Tb full-duplex rate support. */
+        #     OFPPF_OTHER = 1 << 10, /* Other rate, not in the list. */
+        #     OFPPF_COPPER = 1 << 11, /* Copper medium. */
+        #     OFPPF_FIBER = 1 << 12, /* Fiber medium. */
+        #     OFPPF_AUTONEG = 1 << 13, /* Auto-negotiation. */
+        #     OFPPF_PAUSE = 1 << 14, /* Pause. */
+        #     OFPPF_PAUSE_ASYM = 1 << 15 /* Asymmetric pause. */
+        # }
+        # TODO: Look into adtran-physical-entities and decode xSFP type any other settings
+        return IetfInterfacesState._get_of_speed(entry) | OFPPF_FIBER
+
+    @staticmethod
+    def _get_of_speed(entry):
+        speed = IetfInterfacesState._get_speed_value(entry)
+        speed_map = {
+            1000000000: OFPPF_1GB_FD,
+            10000000000: OFPPF_10GB_FD,
+            40000000000: OFPPF_40GB_FD,
+            100000000000: OFPPF_100GB_FD,
+        }
+        # return speed_map.get(speed, OFPPF_OTHER)
+        # TODO: For now, force 100 GB
+        return OFPPF_100GB_FD
+
+    @staticmethod
+    def _get_port_number(name, if_index):
+        import re
+
+        formats = [
+            'xpon \d/{1,2}\d',                          # OLT version 3 (Feb 2018++)
+            'Hundred-Gigabit-Ethernet \d/\d/{1,2}\d',   # OLT version 2
+            'XPON \d/\d/{1,2}\d',                       # OLT version 2
+            'hundred-gigabit-ethernet \d/{1,2}\d',      # OLT version 1
+            'channel-termination {1,2}\d',              # OLT version 1
+        ]
+        p2 = re.compile('\d+')
+
+        for regex in formats:
+            p = re.compile(regex, re.IGNORECASE)
+            match = p.match(name)
+            if match is not None:
+                return int(p2.findall(name)[-1])
+
+    @staticmethod
+    def get_port_entries(rpc_reply, port_type):
+        """
+        Get the port entries that make up the northbound and
+        southbound interfaces
+
+        :param rpc_reply:
+        :param port_type:
+        :return:
+        """
+        ports = dict()
+        result_dict = xmltodict.parse(rpc_reply.data_xml)
+        entries = result_dict['data']['interfaces-state']['interface']
+        if not isinstance(entries, list):
+            entries = [entries]
+        port_entries = [entry for entry in entries if 'name' in entry and
+                        port_type.lower() in entry['name'].lower()]
+
+        for entry in port_entries:
+            port = {
+                'port_no': IetfInterfacesState._get_port_number(entry.get('name'),
+                                                                entry.get('ifindex')),
+                'name': entry.get('name', 'unknown'),
+                'ifIndex': entry.get('ifIndex'),
+                # 'label': None,
+                'mac_address': IetfInterfacesState._get_mac_addr(entry),
+                'admin_state': IetfInterfacesState._get_admin_state(entry),
+                'oper_status': IetfInterfacesState._get_oper_status(entry),
+                'ofp_state': IetfInterfacesState._get_of_state(entry),
+                'ofp_capabilities': IetfInterfacesState._get_of_capabilities(entry),
+                'current_speed': IetfInterfacesState._get_of_speed(entry),
+                'max_speed': IetfInterfacesState._get_of_speed(entry),
+            }
+            port_no = port['port_no']
+            if port_no not in ports:
+                ports[port_no] = port
+            else:
+                ports[port_no].update(port)
+
+        return ports
diff --git a/adapters/adtran_olt/codec/olt_config.py b/adapters/adtran_olt/codec/olt_config.py
new file mode 100644
index 0000000..473e2f6
--- /dev/null
+++ b/adapters/adtran_olt/codec/olt_config.py
@@ -0,0 +1,329 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+
+log = structlog.get_logger()
+
+
+class OltConfig(object):
+    """
+    Class to wrap decode of olt container (config) from the ADTRAN
+    gpon-olt-hw.yang YANG model
+    """
+    def __init__(self, packet):
+        self._packet = packet
+        self._pons = None
+
+    def __str__(self):
+        return "OltConfig: {}".format(self.olt_id)
+
+    @property
+    def olt_id(self):
+        """Unique OLT identifier"""
+        return self._packet.get('olt-id', '')
+
+    @property
+    def debug_output(self):
+        """least important level that will output everything"""
+        return self._packet.get('debug-output', 'warning')
+
+    @property
+    def pons(self):
+        if self._pons is None:
+            self._pons = OltConfig.Pon.decode(self._packet.get('pon', None))
+        return self._pons
+
+    class Pon(object):
+        """
+        Provides decode of PON list from within
+        """
+        def __init__(self, packet):
+            assert 'pon-id' in packet, 'pon-id not found'
+            self._packet = packet
+            self._onus = None
+
+        def __str__(self):
+            return "OltConfig.Pon: pon-id: {}".format(self.pon_id)
+
+        @staticmethod
+        def decode(pon_list):
+            pons = {}
+
+            if pon_list is not None:
+                for pon_data in pon_list:
+                    pon = OltConfig.Pon(pon_data)
+                    assert pon.pon_id not in pons
+                    pons[pon.pon_id] = pon
+
+            return pons
+
+        @property
+        def pon_id(self):
+            """PON identifier"""
+            return self._packet['pon-id']
+
+        @property
+        def enabled(self):
+            """The desired state of the interface"""
+            return self._packet.get('enabled', False)
+
+        @property
+        def downstream_fec_enable(self):
+            """Enables downstream Forward Error Correction"""
+            return self._packet.get('downstream-fec-enable', False)
+
+        @property
+        def upstream_fec_enable(self):
+            """Enables upstream Forward Error Correction"""
+            return self._packet.get('upstream-fec-enable', False)
+
+        @property
+        def deployment_range(self):
+            """Maximum deployment distance (meters)"""
+            return self._packet.get('deployment-range', 25000)
+
+        @property
+        def onus(self):
+            if self._onus is None:
+                self._onus = OltConfig.Pon.Onu.decode(self._packet.get('onus', None))
+            return self._onus
+
+        class Onu(object):
+            """
+            Provides decode of onu list for a PON port
+            """
+            def __init__(self, packet):
+                assert 'onu-id' in packet, 'onu-id not found'
+                self._packet = packet
+                self._tconts = None
+                self._tconts_dict = None
+                self._gem_ports = None
+                self._gem_ports_dict = None
+
+            def __str__(self):
+                return "OltConfig.Pon.Onu: onu-id: {}".format(self.onu_id)
+
+            @staticmethod
+            def decode(onu_dict):
+                onus = {}
+
+                if onu_dict is not None:
+                    if 'onu' in onu_dict:
+                        for onu_data in onu_dict['onu']:
+                            onu = OltConfig.Pon.Onu(onu_data)
+                            assert onu.onu_id not in onus
+                            onus[onu.onu_id] = onu
+                    elif len(onu_dict) > 0 and 'onu-id' in onu_dict[0]:
+                        onu = OltConfig.Pon.Onu(onu_dict[0])
+                        assert onu.onu_id not in onus
+                        onus[onu.onu_id] = onu
+
+                return onus
+
+            @property
+            def onu_id(self):
+                """The ID used to identify the ONU"""
+                return self._packet['onu-id']
+
+            @property
+            def serial_number_64(self):
+                """The serial number (base-64) is unique for each ONU"""
+                return self._packet.get('serial-number', '')
+
+            @property
+            def password(self):
+                """ONU Password"""
+                return self._packet.get('password', bytes(0))
+
+            @property
+            def enable(self):
+                """If true, places the ONU in service"""
+                return self._packet.get('enable', False)
+
+            @property
+            def tconts(self):
+                if self._tconts is None:
+                    self._tconts = OltConfig.Pon.Onu.TCont.decode(self._packet.get('t-conts', None))
+                return self._tconts
+
+            @property
+            def tconts_dict(self):               # TODO: Remove if not used
+                if self._tconts_dict is None:
+                    self._tconts_dict = {tcont.alloc_id: tcont for tcont in self.tconts}
+                return self._tconts_dict
+
+            @property
+            def gem_ports(self):
+                if self._gem_ports is None:
+                    self._gem_ports = OltConfig.Pon.Onu.GemPort.decode(self._packet.get('gem-ports', None))
+                return self._gem_ports
+
+            @property
+            def gem_ports_dict(self):               # TODO: Remove if not used
+                if self._gem_ports_dict is None:
+                    self._gem_ports_dict = {gem.gem_id: gem for gem in self.gem_ports}
+                return self._gem_ports_dict
+
+            class TCont(object):
+                """
+                Provides decode of onu list for the T-CONT container
+                """
+                def __init__(self, packet):
+                    assert 'alloc-id' in packet, 'alloc-id not found'
+                    self._packet = packet
+                    self._traffic_descriptor = None
+                    self._best_effort = None
+
+                def __str__(self):
+                    return "OltConfig.Pon.Onu.TCont: alloc-id: {}".format(self.alloc_id)
+
+                @staticmethod
+                def decode(tcont_container):
+                    tconts = {}
+
+                    if tcont_container is not None:
+                        for tcont_data in tcont_container.get('t-cont', []):
+                            tcont = OltConfig.Pon.Onu.TCont(tcont_data)
+                            assert tcont.alloc_id not in tconts
+                            tconts[tcont.alloc_id] = tcont
+
+                    return tconts
+
+                @property
+                def alloc_id(self):
+                    """The ID used to identify the T-CONT"""
+                    return self._packet['alloc-id']
+
+                @property
+                def traffic_descriptor(self):
+                    """
+                    Each Alloc-ID is provisioned with a traffic descriptor that specifies
+                    the three bandwidth component parameters: fixed bandwidth, assured
+                    bandwidth, and maximum bandwidth, as well as the ternary eligibility
+                    indicator for additional bandwidth assignment
+                    """
+                    if self._traffic_descriptor is None and 'traffic-descriptor' in self._packet:
+                        self._traffic_descriptor = OltConfig.Pon.Onu.TCont.\
+                            TrafficDescriptor(self._packet['traffic-descriptor'])
+                    return self._traffic_descriptor
+
+                class TrafficDescriptor(object):
+                    def __init__(self, packet):
+                        self._packet = packet
+
+                    def __str__(self):
+                        return "OltConfig.Pon.Onu.TCont.TrafficDescriptor: {}/{}/{}".\
+                            format(self.fixed_bandwidth, self.assured_bandwidth,
+                                   self.maximum_bandwidth)
+
+                    @property
+                    def fixed_bandwidth(self):
+                        try:
+                            return int(self._packet.get('fixed-bandwidth', 0))
+                        except:
+                            return 0
+
+                    @property
+                    def assured_bandwidth(self):
+                        try:
+                            return int(self._packet.get('assured-bandwidth', 0))
+                        except:
+                            return 0
+
+                    @property
+                    def maximum_bandwidth(self):
+                        try:
+                            return int(self._packet.get('maximum-bandwidth', 0))
+                        except:
+                            return 0
+
+                    @property
+                    def additional_bandwidth_eligibility(self):
+                        return self._packet.get('additional-bandwidth-eligibility', 'none')
+
+                @property
+                def best_effort(self):
+                    if self._best_effort is None:
+                        self._best_effort = OltConfig.Pon.Onu.TCont.BestEffort.decode(
+                            self._packet.get('best-effort', None))
+                    return self._best_effort
+
+                class BestEffort(object):
+                    def __init__(self, packet):
+                        self._packet = packet
+
+                    def __str__(self):
+                        return "OltConfig.Pon.Onu.TCont.BestEffort: {}".format(self.bandwidth)
+
+                    @property
+                    def bandwidth(self):
+                        return self._packet['bandwidth']
+
+                    @property
+                    def priority(self):
+                        return self._packet['priority']
+
+                    @property
+                    def weight(self):
+                        return self._packet['weight']
+
+            class GemPort(object):
+                """
+                Provides decode of onu list for the gem-ports container
+                """
+                def __init__(self, packet):
+                    assert 'port-id' in packet, 'port-id not found'
+                    self._packet = packet
+
+                def __str__(self):
+                    return "OltConfig.Pon.Onu.GemPort: port-id: {}/{}".\
+                        format(self.port_id, self.alloc_id)
+
+                @staticmethod
+                def decode(gem_port_container):
+                    gem_ports = {}
+
+                    if gem_port_container is not None:
+                        for gem_port_data in gem_port_container.get('gem-port', []):
+                            gem_port = OltConfig.Pon.Onu.GemPort(gem_port_data)
+                            assert gem_port.port_id not in gem_ports
+                            gem_ports[gem_port.port_id] = gem_port
+
+                    return gem_ports
+
+                @property
+                def port_id(self):
+                    """The ID used to identify the GEM Port"""
+                    return self._packet['port-id']
+
+                @property
+                def gem_id(self):
+                    """The ID used to identify the GEM Port"""
+                    return self.port_id
+
+                @property
+                def alloc_id(self):
+                    """The Alloc-ID of the T-CONT to which this GEM port is mapped"""
+                    return self._packet['alloc-id']
+
+                @property
+                def omci_transport(self):
+                    """If true, this GEM port is used to transport the OMCI virtual connection"""
+                    return self._packet.get('omci-transport', False)
+
+                @property
+                def encryption(self):
+                    """If true, enable encryption using the advanced encryption standard(AES)"""
+                    return self._packet.get('encryption', False)
diff --git a/adapters/adtran_olt/codec/olt_state.py b/adapters/adtran_olt/codec/olt_state.py
new file mode 100644
index 0000000..74413a4
--- /dev/null
+++ b/adapters/adtran_olt/codec/olt_state.py
@@ -0,0 +1,290 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+import structlog
+
+log = structlog.get_logger()
+
+
+class OltState(object):
+    """
+    Class to wrap decode of olt-state container from the ADTRAN
+    gpon-olt-hw.yang YANG model
+    """
+
+    def __init__(self, packet):
+        self._packet = packet
+        self._pons = None
+
+    def __str__(self):
+        return "OltState: {}".format(self.software_version)
+
+    @property
+    def software_version(self):
+        """The software version of olt driver"""
+        return self._packet.get('software-version', '')
+
+    @property
+    def pons(self):
+        if self._pons is None:
+            self._pons = OltState.Pon.decode(self._packet.get('pon', None))
+        return self._pons
+
+    #############################################################
+    # Act like a container for simple access into PON list
+
+    def __len__(self):
+        return len(self.pons)
+
+    def __getitem__(self, key):
+        if not isinstance(key, int):
+            raise TypeError('Key should be of type int')
+        if key not in self.pons:
+            raise KeyError("key '{}' not found".format(key))
+
+        return self.pons[key]
+
+    def __iter__(self):
+        raise NotImplementedError('TODO: Not yet implemented')
+
+    def __contains__(self, item):
+        if not isinstance(item, int):
+            raise TypeError('Item should be of type int')
+        return item in self.pons
+
+    # TODO: Look at generator support and if it is useful
+
+    class Pon(object):
+        """
+        Provides decode of PON list from within
+        """
+        def __init__(self, packet):
+            assert 'pon-id' in packet
+            self._packet = packet
+            self._onus = None
+            self._gems = None
+
+        def __str__(self):
+            return "OltState.Pon: pon-id: {}".format(self.pon_id)
+
+        @staticmethod
+        def decode(pon_list):
+            # log.debug('Decoding PON List:{}{}'.format(os.linesep,
+            #                                           pprint.PrettyPrinter().pformat(pon_list)))
+            pons = {}
+            for pon_data in pon_list:
+                pon = OltState.Pon(pon_data)
+                assert pon.pon_id not in pons
+                pons[pon.pon_id] = pon
+
+            return pons
+
+        @property
+        def pon_id(self):
+            """PON identifier"""
+            return self._packet['pon-id']
+
+        @property
+        def downstream_wavelength(self):
+            """The wavelength, in nanometers, being used in the downstream direction"""
+            return self._packet.get('downstream-wavelength', 0)
+
+        @property
+        def upstream_wavelength(self):
+            """The wavelength, in nanometers, being used in the upstream direction"""
+            return self._packet.get('upstream-wavelength', 0)
+
+        @property
+        def downstream_channel_id(self):
+            """Downstream wavelength channel identifier associated with this PON."""
+            return self._packet.get('downstream-channel-id', 0)
+
+        @property
+        def rx_packets(self):
+            """Sum all of the RX Packets of GEM ports that are not base TCONT's"""
+            return int(self._packet.get('rx-packets', 0))
+
+        @property
+        def tx_packets(self):
+            """Sum all of the TX Packets of GEM ports that are not base TCONT's"""
+            return int(self._packet.get('tx-packets', 0))
+
+        @property
+        def rx_bytes(self):
+            """Sum all of the RX Octets of GEM ports that are not base TCONT's"""
+            return int(self._packet.get('rx-bytes', 0))
+
+        @property
+        def tx_bytes(self):
+            """Sum all of the TX Octets of GEM ports that are not base TCONT's"""
+            return int(self._packet.get('tx-bytes', 0))
+
+        @property
+        def tx_bip_errors(self):
+            """Sum the TX ONU bip errors to get TX BIP's per PON"""
+            return int(self._packet.get('tx-bip-errors', 0))
+
+        @property
+        def wm_tuned_out_onus(self):
+            """
+            bit array indicates the list of tuned out ONU's that are in wavelength
+            mobility protecting state.
+                onu-bit-octects:
+                  type binary { length "4 .. 1024"; }
+                  description  each bit position indicates corresponding ONU's status
+                               (true or false) whether that ONU's is in
+                               wavelength mobility protecting state or not
+                               For 128 ONTs per PON, the size of this
+                               array will be 16. onu-bit-octects[0] and MSB bit in that byte
+                               represents ONU 0 etc.
+            """
+            return self._packet.get('wm-tuned-out-onus', bytes(0))
+
+        @property
+        def ont_los(self):
+            """List of configured ONTs that have been previously discovered and are in a los of signal state"""
+            return self._packet.get('ont-los', [])
+
+        @property
+        def discovered_onu(self):
+            """
+            Immutable Set of each Optical Network Unit(ONU) that has been activated via discovery
+                key/value: serial-number (string)
+            """
+            return frozenset([sn['serial-number'] for sn in self._packet.get('discovered-onu', [])
+                              if 'serial-number' in sn and sn['serial-number'] != 'AAAAAAAAAAA='])
+
+        @property
+        def gems(self):
+            """This list is not in the proposed BBF model, the stats are part of ietf-interfaces"""
+            if self._gems is None:
+                self._gems = OltState.Pon.Gem.decode(self._packet.get('gem', []))
+            return self._gems
+
+        @property
+        def onus(self):
+            """
+            The map of each Optical Network Unit(ONU).  Key: ONU ID (int)
+            """
+            if self._onus is None:
+                self._onus = OltState.Pon.Onu.decode(self._packet.get('onu', []))
+            return self._onus
+
+        class Onu(object):
+            """
+            Provides decode of onu list for a PON port
+            """
+            def __init__(self, packet):
+                assert 'onu-id' in packet, 'onu-id not found in packet'
+                self._packet = packet
+
+            def __str__(self):
+                return "OltState.Pon.Onu: onu-id: {}".format(self.onu_id)
+
+            @staticmethod
+            def decode(onu_list):
+                # log.debug('onus:{}{}'.format(os.linesep,
+                #                              pprint.PrettyPrinter().pformat(onu_list)))
+                onus = {}
+                for onu_data in onu_list:
+                    onu = OltState.Pon.Onu(onu_data)
+                    assert onu.onu_id not in onus
+                    onus[onu.onu_id] = onu
+
+                return onus
+
+            @property
+            def onu_id(self):
+                """The ID used to identify the ONU"""
+                return self._packet['onu-id']
+
+            @property
+            def oper_status(self):
+                """The operational state of each ONU"""
+                return self._packet.get('oper-status', 'unknown')
+
+            @property
+            def reported_password(self):
+                """The password reported by the ONU (binary)"""
+                return self._packet.get('reported-password', bytes(0))
+
+            @property
+            def rssi(self):
+                """The received signal strength indication of the ONU"""
+                return self._packet.get('rssi', -9999)
+
+            @property
+            def equalization_delay(self):
+                """Equalization delay (bits)"""
+                return self._packet.get('equalization-delay', 0)
+
+            @property
+            def fiber_length(self):
+                """Distance to ONU"""
+                return self._packet.get('fiber-length', 0)
+
+        class Gem(object):
+            """
+            Provides decode of onu list for a PON port
+            """
+            def __init__(self, packet):
+                assert 'onu-id' in packet, 'onu-id not found in packet'
+                assert 'port-id' in packet, 'port-id not found in packet'
+                assert 'alloc-id' in packet, 'alloc-id not found in packet'
+                self._packet = packet
+
+            def __str__(self):
+                return "OltState.Pon.Gem: onu-id: {}, gem-id".\
+                    format(self.onu_id, self.gem_id)
+
+            @staticmethod
+            def decode(gem_list):
+                # log.debug('gems:{}{}'.format(os.linesep,
+                #                              pprint.PrettyPrinter().pformat(gem_list)))
+                gems = {}
+                for gem_data in gem_list:
+                    gem = OltState.Pon.Gem(gem_data)
+                    assert gem.gem_id not in gems
+                    gems[gem.gem_id] = gem
+
+                return gems
+
+            @property
+            def onu_id(self):
+                """The ID used to identify the ONU"""
+                return self._packet['onu-id']
+
+            @property
+            def alloc_id(self):
+                return self._packet['alloc-id']
+
+            @property
+            def gem_id(self):
+                return self._packet['port-id']
+
+            @property
+            def tx_packets(self):
+                return int(self._packet.get('tx-packets', 0))
+
+            @property
+            def tx_bytes(self):
+                return int(self._packet.get('tx-bytes', 0))
+
+            @property
+            def rx_packets(self):
+                return int(self._packet.get('rx-packets', 0))
+
+            @property
+            def rx_bytes(self):
+                return int(self._packet.get('rx-bytes', 0))
diff --git a/adapters/adtran_olt/codec/physical_entities_state.py b/adapters/adtran_olt/codec/physical_entities_state.py
new file mode 100644
index 0000000..47187c9
--- /dev/null
+++ b/adapters/adtran_olt/codec/physical_entities_state.py
@@ -0,0 +1,80 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from adapters.adtran_common.net.adtran_netconf import adtran_module_url
+from twisted.internet.defer import inlineCallbacks, returnValue
+import xmltodict
+import structlog
+
+log = structlog.get_logger()
+
+_phys_entities_rpc = """
+    <filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
+      <physical-entities-state xmlns="{}">
+        <physical-entity/>
+      </physical-entities-state>
+    </filter>
+    """.format(adtran_module_url('adtran-physical-entities'))
+
+
+class PhysicalEntitiesState(object):
+    def __init__(self, session):
+        self._session = session
+        self._rpc_reply = None
+
+    @inlineCallbacks
+    def get_state(self):
+        self._rpc_reply = None
+        request = self._session.get(_phys_entities_rpc)
+        self._rpc_reply = yield request
+        returnValue(self._rpc_reply)
+
+    @property
+    def physical_entities(self):
+        """
+        :return: (list) of OrderDict physical entities
+        """
+        if self._rpc_reply is None:
+            # TODO: Support auto-get?
+            return None
+
+        result_dict = xmltodict.parse(self._rpc_reply.data_xml)
+        return result_dict['data']['physical-entities-state']['physical-entity']
+
+    def get_physical_entities(self, classification=None):
+        """
+        Get the physical entities of a particular type
+        :param classification: (String or List) The classification or general hardware type of the
+                                                component identified by this physical entity
+                                                (case-insensitive)
+        :return: (list) of OrderDict physical entities
+        """
+        entries = self.physical_entities
+
+        if classification is None:
+            return entries
+
+        # for entry in entries:
+        #     import pprint
+        #     log.info(pprint.PrettyPrinter(indent=2).pformat(entry))
+
+        def _matches(entry, value):
+            if 'classification' in entry and '#text' in entry['classification']:
+                text_val = entry['classification']['#text'].lower()
+                if isinstance(value, list):
+                    return any(v.lower() in text_val for v in value)
+                return value.lower() in text_val
+            return False
+
+        return [entry for entry in entries if _matches(entry, classification)]
diff --git a/adapters/adtran_olt/main.py b/adapters/adtran_olt/main.py
new file mode 100755
index 0000000..07bcc07
--- /dev/null
+++ b/adapters/adtran_olt/main.py
@@ -0,0 +1,558 @@
+#!/usr/bin/env python
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""Adtran OLT Adapter main entry point"""
+
+import argparse
+import os
+import time
+
+import arrow
+import yaml
+from packaging.version import Version
+from simplejson import dumps
+from twisted.internet.defer import inlineCallbacks, returnValue
+from twisted.internet.task import LoopingCall
+from zope.interface import implementer
+
+from pyvoltha.common.structlog_setup import setup_logging, update_logging
+from pyvoltha.common.utils.asleep import asleep
+from pyvoltha.common.utils.deferred_utils import TimeOutError
+from pyvoltha.common.utils.dockerhelpers import get_my_containers_name
+from pyvoltha.common.utils.nethelpers import get_my_primary_local_ipv4, \
+    get_my_primary_interface
+from pyvoltha.common.utils.registry import registry, IComponent
+from pyvoltha.adapters.kafka.adapter_proxy import AdapterProxy
+from pyvoltha.adapters.kafka.adapter_request_facade import AdapterRequestFacade
+from pyvoltha.adapters.kafka.core_proxy import CoreProxy
+from pyvoltha.adapters.kafka.kafka_inter_container_library import IKafkaMessagingProxy, \
+    get_messaging_proxy
+from pyvoltha.adapters.kafka.kafka_proxy import KafkaProxy, get_kafka_proxy
+from adtran_olt import AdtranOltAdapter
+from pyvoltha.protos import third_party
+from pyvoltha.protos.adapter_pb2 import AdapterConfig
+
+_ = third_party
+
+
+defs = dict(
+    version_file='./VERSION',
+    config=os.environ.get('CONFIG', './adapters-adtran_olt.yml'),
+    container_name_regex=os.environ.get('CONTAINER_NUMBER_EXTRACTOR', '^.*\.(['
+                                                                      '0-9]+)\..*$'),
+    consul=os.environ.get('CONSUL', 'localhost:8500'),
+    name=os.environ.get('NAME', 'adtran_olt'),
+    vendor=os.environ.get('VENDOR', 'Voltha Project'),
+    device_type=os.environ.get('DEVICE_TYPE', 'adtran_olt'),
+    accept_bulk_flow=os.environ.get('ACCEPT_BULK_FLOW', True),
+    accept_atomic_flow=os.environ.get('ACCEPT_ATOMIC_FLOW', True),
+    etcd=os.environ.get('ETCD', 'localhost:2379'),
+    core_topic=os.environ.get('CORE_TOPIC', 'rwcore'),
+    interface=os.environ.get('INTERFACE', get_my_primary_interface()),
+    instance_id=os.environ.get('INSTANCE_ID', os.environ.get('HOSTNAME', '1')),
+    kafka_adapter=os.environ.get('KAFKA_ADAPTER', '172.20.10.3:9092'),
+    kafka_cluster=os.environ.get('KAFKA_CLUSTER', '172.20.10.3:9092'),
+    backend=os.environ.get('BACKEND', 'none'),
+    retry_interval=os.environ.get('RETRY_INTERVAL', 2),
+    heartbeat_topic=os.environ.get('HEARTBEAT_TOPIC', "adapters.heartbeat"),
+
+    # Following are for debugging
+    debug_enabled=True,
+    debug_host='work.bcsw.net',
+    # debug_host='10.0.2.15',
+    debug_port=8765,
+)
+
+
+def parse_args():
+    parser = argparse.ArgumentParser()
+
+    _help = ('Path to adapters-adtran_olt.yml config file (default: %s). '
+             'If relative, it is relative to main.py of Adtran OLT adapter.'
+             % defs['config'])
+    parser.add_argument('-c', '--config',
+                        dest='config',
+                        action='store',
+                        default=defs['config'],
+                        help=_help)
+
+    _help = 'Regular expression for extracting container number from ' \
+            'container name (default: %s)' % defs['container_name_regex']
+    parser.add_argument('-X', '--container-number-extractor',
+                        dest='container_name_regex',
+                        action='store',
+                        default=defs['container_name_regex'],
+                        help=_help)
+
+    _help = '<hostname>:<port> to consul agent (default: %s)' % defs['consul']
+    parser.add_argument('-C', '--consul',
+                        dest='consul',
+                        action='store',
+                        default=defs['consul'],
+                        help=_help)
+
+    _help = 'name of this adapter (default: %s)' % defs['name']
+    parser.add_argument('-na', '--name',
+                        dest='name',
+                        action='store',
+                        default=defs['name'],
+                        help=_help)
+
+    _help = 'vendor of this adapter (default: %s)' % defs['vendor']
+    parser.add_argument('-ven', '--vendor',
+                        dest='vendor',
+                        action='store',
+                        default=defs['vendor'],
+                        help=_help)
+
+    _help = 'supported device type of this adapter (default: %s)' % defs[
+        'device_type']
+    parser.add_argument('-dt', '--device_type',
+                        dest='device_type',
+                        action='store',
+                        default=defs['device_type'],
+                        help=_help)
+
+    _help = 'specifies whether the device type accepts bulk flow updates ' \
+            'adapter (default: %s)' % defs['accept_bulk_flow']
+    parser.add_argument('-abf', '--accept_bulk_flow',
+                        dest='accept_bulk_flow',
+                        action='store',
+                        default=defs['accept_bulk_flow'],
+                        help=_help)
+
+    _help = 'specifies whether the device type accepts add/remove flow ' \
+            '(default: %s)' % defs['accept_atomic_flow']
+    parser.add_argument('-aaf', '--accept_atomic_flow',
+                        dest='accept_atomic_flow',
+                        action='store',
+                        default=defs['accept_atomic_flow'],
+                        help=_help)
+
+    _help = '<hostname>:<port> to etcd server (default: %s)' % defs['etcd']
+    parser.add_argument('-e', '--etcd',
+                        dest='etcd',
+                        action='store',
+                        default=defs['etcd'],
+                        help=_help)
+
+    _help = ('unique string id of this container instance (default: %s)'
+             % defs['instance_id'])
+    parser.add_argument('-i', '--instance-id',
+                        dest='instance_id',
+                        action='store',
+                        default=defs['instance_id'],
+                        help=_help)
+
+    _help = 'ETH interface to recieve (default: %s)' % defs['interface']
+    parser.add_argument('-I', '--interface',
+                        dest='interface',
+                        action='store',
+                        default=defs['interface'],
+                        help=_help)
+
+    _help = 'omit startup banner log lines'
+    parser.add_argument('-n', '--no-banner',
+                        dest='no_banner',
+                        action='store_true',
+                        default=False,
+                        help=_help)
+
+    _help = 'do not emit periodic heartbeat log messages'
+    parser.add_argument('-N', '--no-heartbeat',
+                        dest='no_heartbeat',
+                        action='store_true',
+                        default=False,
+                        help=_help)
+
+    _help = "suppress debug and info logs"
+    parser.add_argument('-q', '--quiet',
+                        dest='quiet',
+                        action='count',
+                        help=_help)
+
+    _help = 'enable verbose logging'
+    parser.add_argument('-v', '--verbose',
+                        dest='verbose',
+                        action='count',
+                        help=_help)
+
+    _help = ('use docker container name as container instance id'
+             ' (overrides -i/--instance-id option)')
+    parser.add_argument('--instance-id-is-container-name',
+                        dest='instance_id_is_container_name',
+                        action='store_true',
+                        default=False,
+                        help=_help)
+
+    _help = ('<hostname>:<port> of the kafka adapter broker (default: %s). ('
+             'If not '
+             'specified (None), the address from the config file is used'
+             % defs['kafka_adapter'])
+    parser.add_argument('-KA', '--kafka_adapter',
+                        dest='kafka_adapter',
+                        action='store',
+                        default=defs['kafka_adapter'],
+                        help=_help)
+
+    _help = ('<hostname>:<port> of the kafka cluster broker (default: %s). ('
+             'If not '
+             'specified (None), the address from the config file is used'
+             % defs['kafka_cluster'])
+    parser.add_argument('-KC', '--kafka_cluster',
+                        dest='kafka_cluster',
+                        action='store',
+                        default=defs['kafka_cluster'],
+                        help=_help)
+
+    _help = 'backend to use for config persistence'
+    parser.add_argument('-b', '--backend',
+                        default=defs['backend'],
+                        choices=['none', 'consul', 'etcd'],
+                        help=_help)
+
+    _help = 'topic of core on the kafka bus'
+    parser.add_argument('-ct', '--core_topic',
+                        dest='core_topic',
+                        action='store',
+                        default=defs['core_topic'],
+                        help=_help)
+
+    _help = 'Enable remote python debug'
+    parser.add_argument('-de', '--debug_enabled',
+                        dest='debug_enabled',
+                        action='store_true',
+                        default=defs['debug_enabled'],
+                        help=_help)
+
+    _help = 'remote debug hostname or IP address'
+    parser.add_argument('-dh', '--debug_host',
+                        dest='debug_host',
+                        action='store',
+                        default=defs['debug_host'],
+                        help=_help)
+
+    _help = 'remote debug port number'
+    parser.add_argument('-dp', '--debug_port',
+                        dest='debug_port',
+                        action='store',
+                        default=defs['debug_port'],
+                        help=_help)
+
+    args = parser.parse_args()
+
+    # post-processing
+
+    if args.instance_id_is_container_name:
+        args.instance_id = get_my_containers_name()
+
+    return args
+
+
+def setup_remote_debug(host, port, logger):
+    try:
+        import sys
+        sys.path.append('/voltha/pydevd/pycharm-debug.egg')
+        import pydevd
+        # Initial breakpoint
+
+        pydevd.settrace(host, port=port, stdoutToServer=True, stderrToServer=True, suspend=False)
+
+    except ImportError:
+        logger.error('Error importing pydevd package')
+        logger.error('REMOTE DEBUGGING will not be supported in this run...')
+        # Continue on, you do not want to completely kill VOLTHA, you just need to fix it.
+
+    except AttributeError:
+        logger.error('Attribute error. Perhaps try to explicitly set PYTHONPATH to'
+                     'pydevd directory and rlogger.errorun again?')
+        logger.error('REMOTE DEBUGGING will not be supported in this run...')
+        # Continue on, you do not want to completely kill VOLTHA, you just need to fix it.
+
+    except:
+        import sys
+        logger.error("pydevd startup exception: %s" % sys.exc_info()[0])
+        print('REMOTE DEBUGGING will not be supported in this run...')
+
+
+def load_config(args):
+    path = args.config
+    if path.startswith('.'):
+        dir = os.path.dirname(os.path.abspath(__file__))
+        path = os.path.join(dir, path)
+    path = os.path.abspath(path)
+    with open(path) as fd:
+        config = yaml.load(fd)
+    return config
+
+
+def print_banner(log):
+    log.info("           _____ _______ _____            _   _      ____  _   _______ ")
+    log.info("     /\   |  __ \__   __|  __ \     /\   | \ | |    / __ \| | |__   __|")
+    log.info("    /  \  | |  | | | |  | |__) |   /  \  |  \| |   | |  | | |    | |   ")
+    log.info("   / /\ \ | |  | | | |  |  _  /   / /\ \ | . ` |   | |  | | |    | |   ")
+    log.info("  / ____ \| |__| | | |  | | \ \  / ____ \| |\  |   | |__| | |____| |   ")
+    log.info(" /_/    \_\_____/  |_|  |_| _\_\/_/    \_\_| \_|    \____/|______|_|   ")
+    log.info("     /\      | |           | |                                         ")
+    log.info("    /  \   __| | __ _ _ __ | |_ ___ _ __                               ")
+    log.info("   / /\ \ / _` |/ _` | '_ \| __/ _ \ '__|                              ")
+    log.info("  / ____ \ (_| | (_| | |_) | ||  __/ |                                 ")
+    log.info(" /_/    \_\__,_|\__,_| .__/ \__\___|_|                                 ")
+    log.info("                     | |                                               ")
+    log.info("                     |_|                                               ")
+    log.info("")
+    log.info('(to stop: press Ctrl-C)')
+
+
+@implementer(IComponent)
+class Main(object):
+
+    def __init__(self):
+
+        self.args = args = parse_args()
+        self.config = load_config(args)
+
+        verbosity_adjust = (args.verbose or 0) - (args.quiet or 0)
+        self.log = setup_logging(self.config.get('logging', {}),
+                                 args.instance_id,
+                                 verbosity_adjust=verbosity_adjust)
+        self.log.info('container-number-extractor',
+                      regex=args.container_name_regex)
+
+        if args.debug_enabled:
+            setup_remote_debug(args.debug_host, args.debug_port, self.log)
+
+        self.adtran_olt_adapter_version = self.get_version()
+        self.log.info('ADTRAN-OLT-Adapter-Version', version=self.adtran_olt_adapter_version)
+
+        if not args.no_banner:
+            print_banner(self.log)
+
+        self.adapter = None
+        self.core_proxy = None
+        self.adapter_proxy = None
+
+        # Create a unique instance id using the passed-in instance id and
+        # UTC timestamp
+        current_time = arrow.utcnow().timestamp
+        self.instance_id = self.args.instance_id + '_' + str(current_time)
+
+        self.core_topic = args.core_topic
+        self.listening_topic = args.name
+        self.startup_components()
+
+        if not args.no_heartbeat:
+            self.start_heartbeat()
+            self.start_kafka_cluster_heartbeat(self.instance_id)
+
+    def get_version(self):
+        path = defs['version_file']
+        if not path.startswith('/'):
+            dir = os.path.dirname(os.path.abspath(__file__))
+            path = os.path.join(dir, path)
+
+        path = os.path.abspath(path)
+        version_file = open(path, 'r')
+        v = version_file.read()
+
+        # Use Version to validate the version string - exception will be raised
+        # if the version is invalid
+        Version(v)
+
+        version_file.close()
+        return v
+
+    def start(self):
+        self.start_reactor()  # will not return except Keyboard interrupt
+
+    def stop(self):
+        pass
+
+    def get_args(self):
+        """Allow access to command line args"""
+        return self.args
+
+    def get_config(self):
+        """Allow access to content of config file"""
+        return self.config
+
+    def _get_adapter_config(self):
+        cfg = AdapterConfig()
+        return cfg
+
+    @inlineCallbacks
+    def startup_components(self):
+        try:
+            self.log.info('starting-internal-components',
+                          consul=self.args.consul,
+                          etcd=self.args.etcd)
+
+            registry.register('main', self)
+
+            # Update the logger to output the vcore id.
+            self.log = update_logging(instance_id=self.instance_id,
+                                      vcore_id=None)
+
+            yield registry.register(
+                'kafka_cluster_proxy',
+                KafkaProxy(
+                    self.args.consul,
+                    self.args.kafka_cluster,
+                    config=self.config.get('kafka-cluster-proxy', {})
+                )
+            ).start()
+
+            config = self._get_adapter_config()
+
+            self.core_proxy = CoreProxy(
+                kafka_proxy=None,
+                core_topic=self.core_topic,
+                my_listening_topic=self.listening_topic)
+
+            self.adapter_proxy = AdapterProxy(
+                kafka_proxy=None,
+                core_topic=self.core_topic,
+                my_listening_topic=self.listening_topic)
+
+            self.adapter = AdtranOltAdapter(core_proxy=self.core_proxy,
+                                            adapter_proxy=self.adapter_proxy,
+                                            config=config)
+
+            adtran_request_handler = AdapterRequestFacade(adapter=self.adapter)
+
+            yield registry.register(
+                'kafka_adapter_proxy',
+                IKafkaMessagingProxy(
+                    kafka_host_port=self.args.kafka_adapter,
+                    # TODO: Add KV Store object reference
+                    kv_store=self.args.backend,
+                    default_topic=self.args.name,
+                    group_id_prefix=self.args.instance_id,
+                    target_cls=adtran_request_handler
+                )
+            ).start()
+
+            self.core_proxy.kafka_proxy = get_messaging_proxy()
+            self.adapter_proxy.kafka_proxy = get_messaging_proxy()
+
+            # retry for ever
+            res = yield self._register_with_core(-1)
+
+            self.log.info('started-internal-services')
+
+        except Exception as e:
+            self.log.exception('Failure-to-start-all-components', e=e)
+
+    @inlineCallbacks
+    def shutdown_components(self):
+        """Execute before the reactor is shut down"""
+        self.log.info('exiting-on-keyboard-interrupt')
+        for component in reversed(registry.iterate()):
+            yield component.stop()
+
+        import threading
+        self.log.info('THREADS:')
+        main_thread = threading.current_thread()
+        for t in threading.enumerate():
+            if t is main_thread:
+                continue
+            if not t.isDaemon():
+                continue
+            self.log.info('joining thread {} {}'.format(
+                t.getName(), "daemon" if t.isDaemon() else "not-daemon"))
+            t.join()
+
+    def start_reactor(self):
+        from twisted.internet import reactor
+        reactor.callWhenRunning(
+            lambda: self.log.info('twisted-reactor-started'))
+        reactor.addSystemEventTrigger('before', 'shutdown',
+                                      self.shutdown_components)
+        reactor.run()
+
+    @inlineCallbacks
+    def _register_with_core(self, retries):
+        while 1:
+            try:
+                resp = yield self.core_proxy.register(
+                    self.adapter.adapter_descriptor(),
+                    self.adapter.device_types())
+                if resp:
+                    self.log.info('registered-with-core',
+                                  coreId=resp.instance_id)
+                returnValue(resp)
+            except TimeOutError as e:
+                self.log.warn("timeout-when-registering-with-core", e=e)
+                if retries == 0:
+                    self.log.exception("no-more-retries", e=e)
+                    raise
+                else:
+                    retries = retries if retries < 0 else retries - 1
+                    yield asleep(defs['retry_interval'])
+            except Exception as e:
+                self.log.exception("failed-registration", e=e)
+                raise
+
+    def start_heartbeat(self):
+
+        t0 = time.time()
+        t0s = time.ctime(t0)
+
+        def heartbeat():
+            self.log.debug(status='up', since=t0s, uptime=time.time() - t0)
+
+        lc = LoopingCall(heartbeat)
+        lc.start(10)
+
+    # Temporary function to send a heartbeat message to the external kafka
+    # broker
+    def start_kafka_cluster_heartbeat(self, instance_id):
+        # For heartbeat we will send a message to a specific "voltha-heartbeat"
+        #  topic.  The message is a protocol buf
+        # message
+        message = dict(
+            type='heartbeat',
+            adapter=self.args.name,
+            instance=instance_id,
+            ip=get_my_primary_local_ipv4()
+        )
+        topic = defs['heartbeat_topic']
+
+        def send_msg(start_time):
+            try:
+                kafka_cluster_proxy = get_kafka_proxy()
+                if kafka_cluster_proxy and not kafka_cluster_proxy.is_faulty():
+                    # self.log.debug('kafka-proxy-available')
+                    message['ts'] = arrow.utcnow().timestamp
+                    message['uptime'] = time.time() - start_time
+                    # self.log.debug('start-kafka-heartbeat')
+                    kafka_cluster_proxy.send_message(topic, dumps(message))
+                else:
+                    self.log.error('kafka-proxy-unavailable')
+            except Exception, err:
+                self.log.exception('failed-sending-message-heartbeat', e=err)
+
+        try:
+            t0 = time.time()
+            lc = LoopingCall(send_msg, t0)
+            lc.start(10)
+        except Exception, e:
+            self.log.exception('failed-kafka-heartbeat', e=e)
+
+
+if __name__ == '__main__':
+    Main().start()
diff --git a/adapters/adtran_olt/net/__init__.py b/adapters/adtran_olt/net/__init__.py
new file mode 100644
index 0000000..b0fb0b2
--- /dev/null
+++ b/adapters/adtran_olt/net/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_olt/net/pio_zmq.py b/adapters/adtran_olt/net/pio_zmq.py
new file mode 100644
index 0000000..d50b686
--- /dev/null
+++ b/adapters/adtran_olt/net/pio_zmq.py
@@ -0,0 +1,126 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+import random
+from adapters.adtran_common.net.adtran_zmq import AdtranZmqClient
+from enum import IntEnum
+
+DEFAULT_PIO_TCP_PORT = 5555
+#DEFAULT_PIO_TCP_PORT = 5657
+
+
+class PioClient(AdtranZmqClient):
+    """
+    Adtran ZeroMQ Client for packet in/out service
+    """
+    def __init__(self, ip_address, rx_callback, port):
+        super(PioClient, self).__init__(ip_address, rx_callback, port)
+        self._seq_number = random.randint(1, 2**32)
+
+    class UrlType(IntEnum):
+        PACKET_IN = 0         # Packet In
+        PACKET_OUT = 1        # Packet Out
+        EVCMAPS_REQUEST = 2   # EVC-MAPs request
+        EVCMAPS_RESPONSE = 3  # EVC-MAPs response
+        UNKNOWN = 4           # UNKNOWN URL
+
+    def get_url_type(self, packet):
+        url_type = PioClient.UrlType.UNKNOWN
+        message = json.loads(packet)
+        if 'url' in message:
+            if message['url'] == 'adtran-olt-of-control/packet-in':
+                url_type = PioClient.UrlType.PACKET_IN
+            elif message['url'] == 'adtran-olt-of-control/packet-out':
+                url_type = PioClient.UrlType.PACKET_OUT
+            elif message['url'] == 'adtran-olt-of-control/evc-map-response':
+                url_type = PioClient.UrlType.EVCMAPS_RESPONSE
+            elif message['url'] == 'adtran-olt-of-control/evc-map-request':
+                url_type = PioClient.UrlType.EVCMAPS_REQUEST
+        return url_type
+
+    def decode_packet(self, packet):
+        from scapy.layers.l2 import Ether
+        try:
+            message = json.loads(packet)
+            self.log.debug('message', message=message)
+
+            for field in ['url', 'evc-map-name', 'total-len', 'port-number', 'message-contents']:
+                assert field in message, "Missing field '{}' in received packet".format(field)
+
+            decoded = message['message-contents'].decode('base64')
+
+            assert len(decoded.encode('hex'))/2 == message['total-len'], \
+                'Decoded length ({}) != Message Encoded length ({})'.\
+                format(len(decoded.encode('hex')), message['total-len'])
+
+            return int(message['port-number']), message['evc-map-name'], Ether(decoded)
+
+        except Exception as e:
+            self.log.exception('decode', e=e)
+            raise
+
+    @property
+    def sequence_number(self):
+        if self._seq_number >= 2**32:
+            self._seq_number = 0
+        else:
+            self._seq_number += 1
+
+        return self._seq_number
+
+    def encode_packet(self, egress_port, packet, map_name='TODO', exception_type=''):
+        """
+        Encode a message for transmission as a Packet Out
+        :param egress_port: (int) egress physical port number
+        :param packet: (str) actual message
+        :param map_name: (str) EVC-MAP Name
+        :param exception_type: (str) Type of exception
+        """
+        return json.dumps({
+            'url': 'adtran-olt-of-control/packet-out',
+            'buffer-id': self.sequence_number,
+            'total-len': len(packet),
+            'evc-map-name': map_name,
+            'exception-type': exception_type,
+            'port-number': egress_port,
+            'message-contents': packet.encode('base64')
+        })
+
+    def query_request_packet(self):
+        """
+        Create query-request to get all installed exceptions
+        :return: Request string
+        """
+        return json.dumps({
+            'url': 'adtran-olt-of-control/evc-map-request'
+        })
+
+    def decode_query_response_packet(self, packet, map_name=None):
+        """
+        Create query-request to get all installed exceptions
+        :param map_name: (str) EVC-MAP Name (None=all)
+        :param packet: returned query response packet
+        :return: list of evcmaps and associated exceptions
+        """
+        from scapy.layers.l2 import Ether
+        message = json.loads(packet)
+        self.log.debug('message', message=message)
+
+        if 'url' in message and message['url'] == 'adtran-olt-of-control/evc-map-response':
+            maps=message['evc-map-list']
+            if maps is not None:
+                self.log.debug('evc-maps-query-response', maps=maps)
+                return maps
+        return []
diff --git a/adapters/adtran_olt/net/pon_zmq.py b/adapters/adtran_olt/net/pon_zmq.py
new file mode 100644
index 0000000..aa42917
--- /dev/null
+++ b/adapters/adtran_olt/net/pon_zmq.py
@@ -0,0 +1,61 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+import struct
+import binascii
+from adapters.adtran_common.net.adtran_zmq import AdtranZmqClient
+
+DEFAULT_PON_AGENT_TCP_PORT = 5656
+
+
+class PonClient(AdtranZmqClient):
+    """
+    Adtran ZeroMQ Client for PON Agent service
+    """
+    def __init__(self, ip_address, rx_callback, port):
+        super(PonClient, self).__init__(ip_address, rx_callback, port)
+
+    def encode_omci_packet(self, msg, pon_index, onu_id):
+        """
+        Create an OMCI Tx Packet for the specified ONU
+
+        :param msg: (str) OMCI message to send
+        :param pon_index: (unsigned int) PON Port index
+        :param onu_id: (unsigned int) ONU ID
+
+        :return: (bytes) octet string to send
+        """
+        return json.dumps({"operation": "NOTIFY",
+                           "url": "adtran-olt-pon-control/omci-message",
+                           "pon-id": pon_index,
+                           "onu-id": onu_id,
+                           "message-contents": msg.decode("hex").encode("base64")
+                           })
+
+    def decode_packet(self, packet):
+        """
+        Decode the PON-Agent packet provided by the ZMQ client
+
+        :param packet: (bytes) Packet
+        :return: (long, long, bytes, boolean) PON Index, ONU ID, Frame Contents (OMCI or Ethernet),\
+                                              and a flag indicating if it is OMCI
+        """
+        msg = json.loads(packet)
+        pon_id = msg['pon-id']
+        onu_id = msg['onu-id']
+        msg_data = msg['message-contents'].decode("base64")
+        is_omci = msg['operation'] == "NOTIFY" and 'omci-message' in msg['url']
+
+        return pon_id, onu_id, msg_data, is_omci
diff --git a/adapters/adtran_olt/nni_port.py b/adapters/adtran_olt/nni_port.py
new file mode 100644
index 0000000..af11e9b
--- /dev/null
+++ b/adapters/adtran_olt/nni_port.py
@@ -0,0 +1,457 @@
+#
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+import random
+import arrow
+
+import structlog
+import xmltodict
+from adapters.adtran_common.port import AdtnPort
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, returnValue, succeed, fail
+from twisted.python.failure import Failure
+from pyvoltha.protos.common_pb2 import OperStatus, AdminState
+from pyvoltha.protos.device_pb2 import Port
+from pyvoltha.protos.logical_device_pb2 import LogicalPort
+from pyvoltha.protos.openflow_13_pb2 import OFPPF_100GB_FD, OFPPF_FIBER, OFPPS_LIVE, ofp_port
+
+
+class NniPort(AdtnPort):
+    """
+    Northbound network port, often Ethernet-based
+    """
+    def __init__(self, parent, **kwargs):
+        super(NniPort, self).__init__(parent, **kwargs)
+
+        # TODO: Weed out those properties supported by common 'Port' object
+
+        self.log = structlog.get_logger(port_no=kwargs.get('port_no'))
+        self.log.info('creating')
+
+        # ONOS/SEBA wants 'nni-<port>' for port names, OLT NETCONF wants their
+        # name (something like  hundred-gigabit-ethernet 0/1) which is reported
+        # when we enumerated the ports
+        self._physical_port_name = kwargs.get('name', 'nni-{}'.format(self._port_no))
+        self._logical_port_name = 'nni-{}'.format(self._port_no)
+
+        self._logical_port = None
+
+        self.sync_tick = 10.0
+
+        self._stats_tick = 5.0
+        self._stats_deferred = None
+
+        # Local cache of NNI configuration
+        self._ianatype = '<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>'
+
+        # And optional parameters
+        # TODO: Currently cannot update admin/oper status, so create this enabled and active
+        # self._admin_state = kwargs.pop('admin_state', AdminState.UNKNOWN)
+        # self._oper_status = kwargs.pop('oper_status', OperStatus.UNKNOWN)
+        self._enabled = True
+        self._admin_state = AdminState.ENABLED
+        self._oper_status = OperStatus.ACTIVE
+
+        self._label = self._physical_port_name
+        self._mac_address = kwargs.pop('mac_address', '00:00:00:00:00:00')
+        # TODO: Get with JOT and find out how to pull out MAC Address via NETCONF
+        # TODO: May need to refine capabilities into current, advertised, and peer
+
+        self._ofp_capabilities = kwargs.pop('ofp_capabilities', OFPPF_100GB_FD | OFPPF_FIBER)
+        self._ofp_state = kwargs.pop('ofp_state', OFPPS_LIVE)
+        self._current_speed = kwargs.pop('current_speed', OFPPF_100GB_FD)
+        self._max_speed = kwargs.pop('max_speed', OFPPF_100GB_FD)
+        self._device_port_no = kwargs.pop('device_port_no', self._port_no)
+
+        # Statistics
+        self.rx_dropped = 0
+        self.rx_error_packets = 0
+        self.rx_ucast_packets = 0
+        self.rx_bcast_packets = 0
+        self.rx_mcast_packets = 0
+        self.tx_dropped = 0
+        self.rx_ucast_packets = 0
+        self.tx_bcast_packets = 0
+        self.tx_mcast_packets = 0
+
+    def __str__(self):
+        return "NniPort-{}: Admin: {}, Oper: {}, parent: {}".format(self._port_no,
+                                                                    self._admin_state,
+                                                                    self._oper_status,
+                                                                    self._parent)
+
+    def get_port(self):
+        """
+        Get the VOLTHA PORT object for this port
+        :return: VOLTHA Port object
+        """
+        self.log.debug('get-port-status-update', port=self._port_no,
+                       label=self._label)
+        if self._port is None:
+            self._port = Port(port_no=self._port_no,
+                              label=self._label,
+                              type=Port.ETHERNET_NNI,
+                              admin_state=self._admin_state,
+                              oper_status=self._oper_status)
+
+        if self._port.admin_state != self._admin_state or\
+           self._port.oper_status != self._oper_status:
+
+            self.log.debug('get-port-status-update', admin_state=self._admin_state,
+                           oper_status=self._oper_status)
+            self._port.admin_state = self._admin_state
+            self._port.oper_status = self._oper_status
+
+        return self._port
+
+    @property
+    def iana_type(self):
+        return self._ianatype
+
+    def cancel_deferred(self):
+        super(NniPort, self).cancel_deferred()
+
+        d, self._stats_deferred = self._stats_deferred, None
+        try:
+            if d is not None and d.called:
+                d.cancel()
+        except:
+            pass
+
+    def _update_adapter_agent(self):
+        # adapter_agent add_port also does an update of port status
+        self.log.debug('update-adapter-agent', admin_state=self._admin_state,
+                       oper_status=self._oper_status)
+        self.adapter_agent.add_port(self.olt.device_id, self.get_port())
+
+    def get_logical_port(self):
+        """
+        Get the VOLTHA logical port for this port
+        :return: VOLTHA logical port or None if not supported
+        """
+        def mac_str_to_tuple(mac):
+            """
+            Convert 'xx:xx:xx:xx:xx:xx' MAC address string to a tuple of integers.
+            Example: mac_str_to_tuple('00:01:02:03:04:05') == (0, 1, 2, 3, 4, 5)
+            """
+            return tuple(int(d, 16) for d in mac.split(':'))
+
+        if self._logical_port is None:
+            openflow_port = ofp_port(port_no=self._port_no,
+                                     hw_addr=mac_str_to_tuple(self._mac_address),
+                                     name=self._logical_port_name,
+                                     config=0,
+                                     state=self._ofp_state,
+                                     curr=self._ofp_capabilities,
+                                     advertised=self._ofp_capabilities,
+                                     peer=self._ofp_capabilities,
+                                     curr_speed=self._current_speed,
+                                     max_speed=self._max_speed)
+
+            self._logical_port = LogicalPort(id=self._logical_port_name,
+                                             ofp_port=openflow_port,
+                                             device_id=self._parent.device_id,
+                                             device_port_no=self._device_port_no,
+                                             root_port=True)
+        return self._logical_port
+
+    @inlineCallbacks
+    def finish_startup(self):
+
+        if self.state != AdtnPort.State.INITIAL:
+            returnValue('Done')
+
+        self.log.debug('final-startup')
+        # TODO: Start status polling of NNI interfaces
+        self.deferred = None  # = reactor.callLater(3, self.do_stuff)
+
+        # Begin statistics sync
+        self._stats_deferred = reactor.callLater(self._stats_tick * 2, self._update_statistics)
+
+        try:
+            yield self.set_config('enabled', True)
+
+            super(NniPort, self).finish_startup()
+
+        except Exception as e:
+            self.log.exception('nni-start', e=e)
+            self._oper_status = OperStatus.UNKNOWN
+            self._update_adapter_agent()
+
+        returnValue('Enabled')
+
+    def finish_stop(self):
+
+        # NOTE: Leave all NNI ports active (may have inband management)
+        # TODO: Revisit leaving NNI Ports active on disable
+
+        return self.set_config('enabled', False)
+
+    @inlineCallbacks
+    def reset(self):
+        """
+        Set the NNI Port to a known good state on initial port startup.  Actual
+        NNI 'Start' is done elsewhere
+        """
+        # if self.state != AdtnPort.State.INITIAL:
+        #     self.log.error('reset-ignored', state=self.state)
+        #     returnValue('Ignored')
+
+        self.log.info('resetting', label=self._label)
+
+        # Always enable our NNI ports
+
+        try:
+            results = yield self.set_config('enabled', True)
+            self._admin_state = AdminState.ENABLED
+            self._enabled = True
+            returnValue(results)
+
+        except Exception as e:
+            self.log.exception('reset', e=e)
+            self._admin_state = AdminState.UNKNOWN
+            raise
+
+    @inlineCallbacks
+    def set_config(self, leaf, value):
+        if isinstance(value, bool):
+            value = 'true' if value else 'false'
+
+        config = '<interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">' + \
+                 ' <interface>' + \
+                 '  <name>{}</name>'.format(self._physical_port_name) + \
+                 '  {}'.format(self._ianatype) + \
+                 '  <{}>{}</{}>'.format(leaf, value, leaf) + \
+                 ' </interface>' + \
+                 '</interfaces>'
+        try:
+            results = yield self._parent.netconf_client.edit_config(config)
+            returnValue(results)
+
+        except Exception as e:
+            self.log.exception('set', leaf=leaf, value=value, e=e)
+            raise
+
+    def get_nni_config(self):
+        config = '<filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">' + \
+                 ' <interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">' + \
+                 '  <interface>' + \
+                 '   <name>{}</name>'.format(self._physical_port_name) + \
+                 '   <enabled/>' + \
+                 '  </interface>' + \
+                 ' </interfaces>' + \
+                 '</filter>'
+        return self._parent.netconf_client.get(config)
+
+    def get_nni_statistics(self):
+        state = '<filter xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">' + \
+                 ' <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">' + \
+                 '  <interface>' + \
+                 '   <name>{}</name>'.format(self._physical_port_name) + \
+                 '   <admin-status/>' + \
+                 '   <oper-status/>' + \
+                 '   <statistics/>' + \
+                 '  </interface>' + \
+                 ' </interfaces>' + \
+                 '</filter>'
+        return self._parent.netconf_client.get(state)
+
+    def sync_hardware(self):
+        if self.state == AdtnPort.State.RUNNING or self.state == AdtnPort.State.STOPPED:
+            def read_config(results):
+                #self.log.debug('read-config', results=results)
+                try:
+                    result_dict = xmltodict.parse(results.data_xml)
+                    interfaces = result_dict['data']['interfaces']
+                    if 'if:interface' in interfaces:
+                        entries = interfaces['if:interface']
+                    else:
+                        entries = interfaces['interface']
+
+                    enabled = entries.get('enabled',
+                                          str(not self.enabled).lower()) == 'true'
+
+                    if self.enabled == enabled:
+                        return succeed('in-sync')
+
+                    self.set_config('enabled', self.enabled)
+                    self._oper_status = OperStatus.ACTIVE
+                    self._update_adapter_agent()
+
+                except Exception as e:
+                    self.log.exception('read-config', e=e)
+                    return fail(Failure())
+
+            def failure(reason):
+                self.log.error('hardware-sync-failed', reason=reason)
+
+            def reschedule(_):
+                delay = self.sync_tick
+                delay += random.uniform(-delay / 10, delay / 10)
+                self.sync_deferred = reactor.callLater(delay, self.sync_hardware)
+
+            self.sync_deferred = self.get_nni_config()
+            self.sync_deferred.addCallbacks(read_config, failure)
+            self.sync_deferred.addBoth(reschedule)
+
+    def _decode_nni_statistics(self, entry):
+        # admin_status = entry.get('admin-status')
+        # oper_status = entry.get('oper-status')
+        # admin_status = entry.get('admin-status')
+        # phys_address = entry.get('phys-address')
+
+        stats = entry.get('statistics')
+        if stats is not None:
+            self.timestamp = arrow.utcnow().float_timestamp
+            self.rx_bytes = int(stats.get('in-octets', 0))
+            self.rx_ucast_packets = int(stats.get('in-unicast-pkts', 0))
+            self.rx_bcast_packets = int(stats.get('in-broadcast-pkts', 0))
+            self.rx_mcast_packets = int(stats.get('in-multicast-pkts', 0))
+            self.rx_error_packets = int(stats.get('in-errors', 0)) + int(stats.get('in-discards', 0))
+
+            self.tx_bytes = int(stats.get('out-octets', 0))
+            self.tx_ucast_packets = int(stats.get('out-unicast-pkts', 0))
+            self.tx_bcast_packets = int(stats.get('out-broadcast-pkts', 0))
+            self.tx_mcasy_packets = int(stats.get('out-multicast-pkts', 0))
+            self.tx_error_packets = int(stats.get('out-errors', 0)) + int(stats.get('out-discards', 0))
+
+            self.rx_packets = self.rx_ucast_packets + self.rx_mcast_packets + self.rx_bcast_packets
+            self.tx_packets = self.tx_ucast_packets + self.tx_mcast_packets + self.tx_bcast_packets
+            # No support for rx_crc_errors or bip_errors
+
+    def _update_statistics(self):
+        if self.state == AdtnPort.State.RUNNING:
+            def read_state(results):
+                # self.log.debug('read-state', results=results)
+                try:
+                    result_dict = xmltodict.parse(results.data_xml)
+                    entry = result_dict['data']['interfaces-state']['interface']
+                    self._decode_nni_statistics(entry)
+                    return succeed('done')
+
+                except Exception as e:
+                    self.log.exception('read-state', e=e)
+                    return fail(Failure())
+
+            def failure(reason):
+                self.log.error('update-stats-failed', reason=reason)
+
+            def reschedule(_):
+                delay = self._stats_tick
+                delay += random.uniform(-delay / 10, delay / 10)
+                self._stats_deferred = reactor.callLater(delay, self._update_statistics)
+
+            try:
+                self._stats_deferred = self.get_nni_statistics()
+                self._stats_deferred.addCallbacks(read_state, failure)
+                self._stats_deferred.addBoth(reschedule)
+
+            except Exception as e:
+                self.log.exception('nni-sync', port=self.name, e=e)
+                self._stats_deferred = reactor.callLater(self._stats_tick, self._update_statistics)
+
+
+class MockNniPort(NniPort):
+    """
+    A class similar to the 'Port' class in the VOLTHA but for a non-existent (virtual OLT)
+
+    TODO: Merge this with the Port class or cleanup where possible
+          so we do not duplicate fields/properties/methods
+    """
+
+    def __init__(self, parent, **kwargs):
+        super(MockNniPort, self).__init__(parent, **kwargs)
+
+    def __str__(self):
+        return "NniPort-mock-{}: Admin: {}, Oper: {}, parent: {}".format(self._port_no,
+                                                                         self._admin_state,
+                                                                         self._oper_status,
+                                                                         self._parent)
+
+    @staticmethod
+    def get_nni_port_state_results():
+        from ncclient.operations.retrieve import GetReply
+        raw = """
+        <?xml version="1.0" encoding="UTF-8"?>
+        <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
+        xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
+        message-id="urn:uuid:59e71979-01bb-462f-b17a-b3a45e1889ac">
+          <data>
+            <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+              <interface><name>hundred-gigabit-ethernet 0/1</name></interface>
+            </interfaces-state>
+          </data>
+        </rpc-reply>
+        """
+        return GetReply(raw)
+
+    @staticmethod
+    def get_pon_port_state_results():
+        from ncclient.operations.retrieve import GetReply
+        raw = """
+        <?xml version="1.0" encoding="UTF-8"?>
+        <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
+        xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
+        message-id="urn:uuid:59e71979-01bb-462f-b17a-b3a45e1889ac">
+          <data>
+            <interfaces-state xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+              <interface><name>XPON 0/1</name></interface>
+              <interface><name>XPON 0/2</name></interface>
+              <interface><name>XPON 0/3</name></interface>
+              <interface><name>XPON 0/4</name></interface>
+              <interface><name>XPON 0/5</name></interface>
+              <interface><name>XPON 0/6</name></interface>
+              <interface><name>XPON 0/7</name></interface>
+              <interface><name>XPON 0/8</name></interface>
+              <interface><name>XPON 0/9</name></interface>
+              <interface><name>XPON 0/10</name></interface>
+              <interface><name>XPON 0/11</name></interface>
+              <interface><name>XPON 0/12</name></interface>
+              <interface><name>XPON 0/13</name></interface>
+              <interface><name>XPON 0/14</name></interface>
+              <interface><name>XPON 0/15</name></interface>
+              <interface><name>XPON 0/16</name></interface>
+            </interfaces-state>
+          </data>
+        </rpc-reply>
+        """
+        return GetReply(raw)
+
+    def reset(self):
+        """
+        Set the NNI Port to a known good state on initial port startup.  Actual
+        NNI 'Start' is done elsewhere
+        """
+        if self.state != AdtnPort.State.INITIAL:
+            self.log.error('reset-ignored', state=self.state)
+            return fail()
+
+        self.log.info('resetting', label=self._label)
+
+        # Always enable our NNI ports
+
+        self._enabled = True
+        self._admin_state = AdminState.ENABLED
+        return succeed('Enabled')
+
+    def set_config(self, leaf, value):
+
+        if leaf == 'enabled':
+            self._enabled = value
+        else:
+            raise NotImplemented("Leaf '{}' is not supported".format(leaf))
+
+        return succeed('Success')
diff --git a/adapters/adtran_olt/onu.py b/adapters/adtran_olt/onu.py
new file mode 100644
index 0000000..648d33e
--- /dev/null
+++ b/adapters/adtran_olt/onu.py
@@ -0,0 +1,701 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import base64
+import binascii
+import json
+import structlog
+from twisted.internet import reactor, defer
+from twisted.internet.defer import inlineCallbacks, returnValue, succeed
+from pyvoltha.common.tech_profile.tech_profile import DEFAULT_TECH_PROFILE_TABLE_ID
+from pyvoltha.protos.device_pb2 import Device
+
+from adtran_olt_handler import AdtranOltHandler
+from adapters.adtran_common.net.adtran_rest import RestInvalidResponseCode
+
+_MAX_EXPEDITE_COUNT = 5
+_EXPEDITE_SECS = 2
+_HW_SYNC_SECS = 60
+
+
+class Onu(object):
+    """
+    Wraps an ONU
+    """
+    DEFAULT_PASSWORD = ''
+
+    def __init__(self, onu_info):
+        self._onu_id = onu_info['onu-id']
+        if self._onu_id is None:
+            raise ValueError('No ONU ID available')
+
+        pon = onu_info['pon']
+        self._olt = pon.olt
+        self._pon_id = pon.pon_id
+        self._name = '{}@{}'.format(pon.physical_port_name, self._onu_id)
+        self.log = structlog.get_logger(pon_id=self._pon_id, onu_id=self._onu_id)
+
+        self._valid = True          # Set false during delete/cleanup
+        self._serial_number_base64 = Onu.string_to_serial_number(onu_info['serial-number'])
+        self._serial_number_string = onu_info['serial-number']
+        self._device_id = onu_info['device-id']
+        self._password = onu_info['password']
+        self._created = False
+        self._proxy_address = Device.ProxyAddress(device_id=self.olt.device_id,
+                                                  channel_id=self.olt.pon_id_to_port_number(self._pon_id),
+                                                  onu_id=self._onu_id,
+                                                  onu_session_id=self._onu_id)
+        self._sync_tick = _HW_SYNC_SECS
+        self._expedite_sync = False
+        self._expedite_count = 0
+        self._resync_flows = False
+        self._sync_deferred = None     # For sync of ONT config to hardware
+
+        self._gem_ports = {}                        # gem-id -> GemPort
+        self._tconts = {}                           # alloc-id -> TCont
+        self._uni_ports = onu_info['uni-ports']
+
+        # Provisionable items
+        self._enabled = onu_info['enabled']
+        self._upstream_fec_enable = onu_info.get('upstream-fec')
+
+        # KPI related items
+        self._rssi = -9999
+        self._equalization_delay = 0
+        self._fiber_length = 0
+        self._timestamp = None     # Last time the KPI items were updated
+
+    def __str__(self):
+        return "ONU-{}:{}, SN: {}/{}".format(self._pon_id, self._onu_id,
+                                             self._serial_number_string, self._serial_number_base64)
+
+    @staticmethod
+    def serial_number_to_string(value):
+        sval = base64.decodestring(value)
+        unique = [elem.encode("hex") for elem in sval[4:8]]
+        return '{}{}{}{}{}'.format(sval[:4], unique[0], unique[1], unique[2], unique[3]).upper()
+
+    @staticmethod
+    def string_to_serial_number(value):
+        bvendor = [octet for octet in value[:4]]
+        bunique = [binascii.a2b_hex(value[offset:offset + 2]) for offset in xrange(4, 12, 2)]
+        bvalue = ''.join(bvendor + bunique)
+        return base64.b64encode(bvalue)
+
+    @property
+    def olt(self):
+        return self._olt
+
+    @property
+    def pon(self):
+        return self.olt.southbound_ports[self._pon_id]
+
+    @property
+    def intf_id(self):
+        return self.pon.intf_id
+
+    @property
+    def pon_id(self):
+        return self._pon_id
+
+    @property
+    def onu_id(self):
+        return self._onu_id
+
+    @property
+    def device_id(self):
+        return self._device_id
+
+    @property
+    def name(self):
+        return self._name
+
+    @property
+    def upstream_fec_enable(self):
+        return self._upstream_fec_enable
+
+    @upstream_fec_enable.setter
+    def upstream_fec_enable(self, value):
+        assert isinstance(value, bool), 'upstream FEC enabled is a boolean'
+        if self._upstream_fec_enable != value:
+            self._upstream_fec_enable = value
+
+        # Recalculate PON upstream FEC
+        self.pon.upstream_fec_enable = self.pon.any_upstream_fec_enabled
+
+    @property
+    def password(self):
+        """
+        Get password.  Base 64 format
+        """
+        return self._password
+
+    @password.setter
+    def password(self, value):
+        """
+        Set the password
+        :param value: (str) base 64 encoded value
+        """
+        if self._password is None and value is not None:
+            self._password = value
+            reg_id = (value.decode('base64')).rstrip('\00').lstrip('\00')
+            # Must remove any non-printable characters
+            reg_id = ''.join([i if 127 > ord(i) > 31 else '_' for i in reg_id])
+            # Generate alarm here for regID
+            from voltha.extensions.alarms.onu.onu_active_alarm import OnuActiveAlarm
+            self.log.info('onu-Active-Alarm', serial_number=self._serial_number_string)
+            device = self._olt.adapter_agent.get_device(self._olt.device_id)
+
+            OnuActiveAlarm(self._olt.alarms, self._olt.device_id, self._pon_id,
+                           self._serial_number_string, reg_id, device.serial_number,
+                           ipv4_address=device.ipv4_address).raise_alarm()
+
+    @property
+    def enabled(self):
+        return self._enabled
+
+    @enabled.setter
+    def enabled(self, value):
+        if self._enabled != value:
+            self._enabled = value
+            self._resync_flows = True
+
+            self.set_config('enable', self._enabled)
+
+            if self._enabled:
+                self.start()
+            else:
+                self.stop()
+
+        # Recalculate PON upstream FEC
+        self.pon.upstream_fec_enable = self.pon.any_upstream_fec_enabled
+
+    @property
+    def uni_ports(self):
+        return self._uni_ports
+
+    @property
+    def logical_port(self):
+        """Return the logical PORT number of this ONU's UNI"""
+        # TODO: once we support multiple UNIs, this needs to be revisited
+        return self._uni_ports[0]
+
+    @property
+    def gem_ports(self):
+        return self._gem_ports.values()
+
+    @property
+    def proxy_address(self):
+        return self._proxy_address
+
+    @property
+    def serial_number_64(self):
+        return self._serial_number_base64
+
+    @property
+    def serial_number(self):
+        return self._serial_number_string
+
+    @property
+    def timestamp(self):
+        # Last time the KPI items were updated
+        return self._timestamp
+
+    @timestamp.setter
+    def timestamp(self, value):
+        self._timestamp = value
+
+    @property
+    def rssi(self):
+        """The received signal strength indication of the ONU"""
+        return self._rssi
+
+    @rssi.setter
+    def rssi(self, value):
+        if self._rssi != value:
+            self._rssi = value
+            # TODO: Notify anyone?
+
+    @property
+    def equalization_delay(self):
+        """Equalization delay (bits)"""
+        return self._equalization_delay
+
+    @equalization_delay.setter
+    def equalization_delay(self, value):
+        if self._equalization_delay != value:
+            self._equalization_delay = value
+            # TODO: Notify anyone?
+
+    @property
+    def fiber_length(self):
+        """Distance to ONU"""
+        return self._fiber_length
+
+    @fiber_length.setter
+    def fiber_length(self, value):
+        if self._fiber_length != value:
+            self._fiber_length = value
+            # TODO: Notify anyone?
+
+    def _cancel_deferred(self):
+        d, self._sync_deferred = self._sync_deferred, None
+
+        if d is not None and not d.called:
+            try:
+                d.cancel()
+            except Exception:
+                pass
+
+    @inlineCallbacks
+    def create(self, reflow=False):
+        """
+        Create (or reflow) this ONU to hardware
+        :param reflow: (boolean) Flag, if True, indicating if this is a reflow ONU
+                                 information after an unmanaged OLT hardware reboot
+        """
+        self.log.debug('create', reflow=reflow)
+        self._cancel_deferred()
+
+        data = json.dumps({'onu-id': self._onu_id,
+                           'serial-number': self._serial_number_base64,
+                           'enable': self._enabled})
+        uri = AdtranOltHandler.GPON_ONU_CONFIG_LIST_URI.format(self._pon_id)
+        name = 'onu-create-{}-{}-{}: {}'.format(self._pon_id, self._onu_id,
+                                                self._serial_number_base64, self._enabled)
+
+        first_sync = self._sync_tick if self._created else 5
+
+        if not self._created or reflow:
+            try:
+                yield self.olt.rest_client.request('POST', uri, data=data, name=name)
+                self._created = True
+
+            except Exception as e:
+                self.log.exception('onu-create', e=e)
+                # See if it failed due to already being configured
+                url = AdtranOltHandler.GPON_ONU_CONFIG_URI.format(self._pon_id, self._onu_id)
+                url += '/serial-number'
+
+                try:
+                    results = yield self.olt.rest_client.request('GET', uri, name=name)
+                    self.log.debug('onu-create-check', results=results)
+                    if len(results) == 1 and results[0].get('serial-number', '') != self._serial_number_base64:
+                        self._created = True
+
+                except Exception as _e:
+                    self.log.warn('onu-exists-check', pon_id=self.pon_id, onu_id=self.onu_id,
+                                  serial_number=self.serial_number)
+
+        self._sync_deferred = reactor.callLater(first_sync, self._sync_hardware)
+
+        # Recalculate PON upstream FEC
+        self.pon.upstream_fec_enable = self.pon.any_upstream_fec_enabled
+        returnValue('created')
+
+    @inlineCallbacks
+    def delete(self):
+        """
+        Clean up ONU (gems/tconts). ONU removal from OLT h/w done by PonPort
+        :return: (deferred)
+        """
+        self._valid = False
+        self._cancel_deferred()
+
+        # Remove from H/W
+        gem_ids = self._gem_ports.keys()
+        alloc_ids = self._tconts.keys()
+
+        dl = []
+        for gem_id in gem_ids:
+            dl.append(self.remove_gem_id(gem_id))
+
+        try:
+            yield defer.gatherResults(dl, consumeErrors=True)
+        except Exception as _e:
+            pass
+
+        dl = []
+        for alloc_id in alloc_ids:
+            dl.append(self.remove_tcont(alloc_id))
+
+        try:
+            yield defer.gatherResults(dl, consumeErrors=True)
+        except Exception as _e:
+             pass
+
+        self._gem_ports.clear()
+        self._tconts.clear()
+        olt, self._olt = self._olt, None
+
+        uri = AdtranOltHandler.GPON_ONU_CONFIG_URI.format(self._pon_id, self._onu_id)
+        name = 'onu-delete-{}-{}-{}: {}'.format(self._pon_id, self._onu_id,
+                                                self._serial_number_base64, self._enabled)
+        try:
+            yield olt.rest_client.request('DELETE', uri, name=name)
+
+        except RestInvalidResponseCode as e:
+            if e.code != 404:
+                self.log.exception('onu-delete', e=e)
+
+        except Exception as e:
+            self.log.exception('onu-delete', e=e)
+
+        # Release resource manager resources for this ONU
+        pon_intf_id_onu_id = (self.pon_id, self.onu_id)
+        olt.resource_mgr.free_pon_resources_for_onu(pon_intf_id_onu_id)
+
+        returnValue('deleted')
+
+    def start(self):
+        self._cancel_deferred()
+        self._sync_deferred = reactor.callLater(0, self._sync_hardware)
+
+    def stop(self):
+        self._cancel_deferred()
+
+    def restart(self):
+        if not self._valid:
+            return succeed('Deleting')
+
+        self._cancel_deferred()
+        self._sync_deferred = reactor.callLater(0, self._sync_hardware)
+
+        return self.create()
+
+    def _sync_hardware(self):
+        from codec.olt_config import OltConfig
+        self.log.debug('sync-hardware')
+
+        def read_config(results):
+            self.log.debug('read-config', results=results)
+
+            dl = []
+
+            try:
+                config = OltConfig.Pon.Onu.decode([results])
+                assert self.onu_id in config, 'sync-onu-not-found-{}'.format(self.onu_id)
+                config = config[self.onu_id]
+
+                if self._enabled != config.enable:
+                    dl.append(self.set_config('enable', self._enabled))
+
+                if self.serial_number_64 != config.serial_number_64:
+                    dl.append(self.set_config('serial-number', self.serial_number_64))
+
+                if self._enabled:
+                    # Sync TCONTs if everything else in sync
+                    if len(dl) == 0:
+                        dl.extend(sync_tconts(config.tconts))
+
+                    # Sync GEM Ports if everything else in sync
+
+                    if len(dl) == 0:
+                        dl.extend(sync_gem_ports(config.gem_ports))
+
+                    if len(dl) == 0:
+                        sync_flows()
+
+            except Exception as e:
+                self.log.exception('hw-sync-read-config', e=e)
+
+            # Run h/w sync again a bit faster if we had to sync anything
+            self._expedite_sync = len(dl) > 0
+
+            # TODO: do checks
+            return defer.gatherResults(dl, consumeErrors=True)
+
+        def sync_tconts(hw_tconts):
+            hw_alloc_ids = frozenset(hw_tconts.iterkeys())
+            my_alloc_ids = frozenset(self._tconts.iterkeys())
+            dl = []
+
+            try:
+                extra_alloc_ids = hw_alloc_ids - my_alloc_ids
+                dl.extend(sync_delete_extra_tconts(extra_alloc_ids))
+
+                missing_alloc_ids = my_alloc_ids - hw_alloc_ids
+                dl.extend(sync_add_missing_tconts(missing_alloc_ids))
+
+                matching_alloc_ids = my_alloc_ids & hw_alloc_ids
+                matching_hw_tconts = {alloc_id: tcont
+                                      for alloc_id, tcont in hw_tconts.iteritems()
+                                      if alloc_id in matching_alloc_ids}
+                dl.extend(sync_matching_tconts(matching_hw_tconts))
+
+            except Exception as e2:
+                self.log.exception('hw-sync-tconts', e=e2)
+
+            return dl
+
+        def sync_delete_extra_tconts(alloc_ids):
+            return [self.remove_tcont(alloc_id) for alloc_id in alloc_ids]
+
+        def sync_add_missing_tconts(alloc_ids):
+            return [self.add_tcont(self._tconts[alloc_id], reflow=True) for alloc_id in alloc_ids]
+
+        def sync_matching_tconts(hw_tconts):
+            from xpon.traffic_descriptor import TrafficDescriptor
+
+            dl = []
+            # TODO: sync TD & Best Effort. Only other TCONT leaf is the key
+            for alloc_id, hw_tcont in hw_tconts.iteritems():
+                my_tcont = self._tconts[alloc_id]
+                my_td = my_tcont.traffic_descriptor
+                hw_td = hw_tcont.traffic_descriptor
+                if my_td is None:
+                    continue
+
+                my_additional = TrafficDescriptor.AdditionalBwEligibility.\
+                    to_string(my_td.additional_bandwidth_eligibility)
+
+                reflow = hw_td is None or \
+                    my_td.fixed_bandwidth != hw_td.fixed_bandwidth or \
+                    my_td.assured_bandwidth != hw_td.assured_bandwidth or \
+                    my_td.maximum_bandwidth != hw_td.maximum_bandwidth or \
+                    my_additional != hw_td.additional_bandwidth_eligibility
+
+                if not reflow and \
+                        my_td.additional_bandwidth_eligibility == \
+                        TrafficDescriptor.AdditionalBwEligibility.BEST_EFFORT_SHARING and \
+                        my_td.best_effort is not None:
+
+                    hw_be = hw_td.best_effort
+                    my_be = my_td.best_effort
+
+                    reflow = hw_be is None or \
+                        my_be.bandwidth != hw_be.bandwidth or \
+                        my_be.priority != hw_be.priority or \
+                        my_be.weight != hw_be.weight
+
+                if reflow:
+                    dl.append(my_tcont.add_to_hardware(self.olt.rest_client))
+            return dl
+
+        def sync_gem_ports(hw_gem_ports):
+            hw_gems_ids = frozenset(hw_gem_ports.iterkeys())
+            my_gems_ids = frozenset(self._gem_ports.iterkeys())
+            dl = []
+
+            try:
+                extra_gems_ids = hw_gems_ids - my_gems_ids
+                dl.extend(sync_delete_extra_gem_ports(extra_gems_ids))
+
+                missing_gem_ids = my_gems_ids - hw_gems_ids
+                dl.extend(sync_add_missing_gem_ports(missing_gem_ids))
+
+                matching_gem_ids = my_gems_ids & hw_gems_ids
+                matching_hw_gem_ports = {gem_id: gem_port
+                                         for gem_id, gem_port in hw_gem_ports.iteritems()
+                                         if gem_id in matching_gem_ids}
+
+                dl.extend(sync_matching_gem_ports(matching_hw_gem_ports))
+                self._resync_flows |= len(dl) > 0
+
+            except Exception as ex:
+                self.log.exception('hw-sync-gem-ports', e=ex)
+
+            return dl
+
+        def sync_delete_extra_gem_ports(gem_ids):
+            return [self.remove_gem_id(gem_id) for gem_id in gem_ids]
+
+        def sync_add_missing_gem_ports(gem_ids):
+            return [self.add_gem_port(self._gem_ports[gem_id], reflow=True)
+                    for gem_id in gem_ids]
+
+        def sync_matching_gem_ports(hw_gem_ports):
+            dl = []
+            for gem_id, hw_gem_port in hw_gem_ports.iteritems():
+                gem_port = self._gem_ports[gem_id]
+
+                if gem_port.alloc_id != hw_gem_port.alloc_id or\
+                        gem_port.encryption != hw_gem_port.encryption or\
+                        gem_port.omci_transport != hw_gem_port.omci_transport:
+                    dl.append(gem_port.add_to_hardware(self.olt.rest_client,
+                                                       operation='PATCH'))
+            return dl
+
+        def sync_flows():
+            from flow.flow_entry import FlowEntry
+
+            reflow, self._resync_flows = self._resync_flows, False
+            return FlowEntry.sync_flows_by_onu(self, reflow=reflow)
+
+        def failure(_reason):
+            # self.log.error('hardware-sync-get-config-failed', reason=_reason)
+            pass
+
+        def reschedule(_):
+            import random
+            delay = self._sync_tick if self._enabled else 5 * self._sync_tick
+
+            # Speed up sequential resync a limited number of times if out of sync
+            # With 60 second initial an typical worst case resync of 4 times, this
+            # should resync an ONU and all it's gem-ports and tconts within <90 seconds
+            if self._expedite_sync and self._enabled:
+                self._expedite_count += 1
+                if self._expedite_count < _MAX_EXPEDITE_COUNT:
+                    delay = _EXPEDITE_SECS
+            else:
+                self._expedite_count = 0
+
+            delay += random.uniform(-delay / 10, delay / 10)
+            self._sync_deferred = reactor.callLater(delay, self._sync_hardware)
+            self._expedite_sync = False
+
+        # If PON is not enabled, skip hw-sync. If ONU not enabled, do it but less
+        # frequently
+        if not self.pon.enabled:
+            return reschedule('not-enabled')
+
+        try:
+            self._sync_deferred = self._get_config()
+            self._sync_deferred.addCallbacks(read_config, failure)
+            self._sync_deferred.addBoth(reschedule)
+
+        except Exception as e:
+            self.log.exception('hw-sync-main', e=e)
+            return reschedule('sync-exception')
+
+    def _get_config(self):
+        uri = AdtranOltHandler.GPON_ONU_CONFIG_URI.format(self._pon_id, self.onu_id)
+        name = 'pon-get-onu_config-{}-{}'.format(self._pon_id, self.onu_id)
+        return self.olt.rest_client.request('GET', uri, name=name)
+
+    def set_config(self, leaf, value):
+        self.log.debug('set-config', leaf=leaf, value=value)
+        data = json.dumps({leaf: value})
+        uri = AdtranOltHandler.GPON_ONU_CONFIG_URI.format(self._pon_id, self._onu_id)
+        name = 'onu-set-config-{}-{}-{}: {}'.format(self._pon_id, self._onu_id, leaf, value)
+        return self.olt.rest_client.request('PATCH', uri, data=data, name=name)
+
+    @property
+    def alloc_ids(self):
+        """
+        Get alloc-id's of all T-CONTs
+        """
+        return frozenset(self._tconts.keys())
+
+    @inlineCallbacks
+    def add_tcont(self, tcont, reflow=False):
+        """
+        Creates/ a T-CONT with the given alloc-id
+
+        :param tcont: (TCont) Object that maintains the TCONT properties
+        :param reflow: (boolean) If true, force add (used during h/w resync)
+        :return: (deferred)
+        """
+        if not self._valid:
+            returnValue('Deleting')
+
+        if not reflow and tcont.alloc_id in self._tconts:
+            returnValue('already created')
+
+        self.log.info('add', tcont=tcont, reflow=reflow)
+        self._tconts[tcont.alloc_id] = tcont
+
+        try:
+            results = yield tcont.add_to_hardware(self.olt.rest_client)
+
+        except Exception as e:
+            self.log.exception('tcont', tcont=tcont, reflow=reflow, e=e)
+            results = 'resync needed'
+
+        returnValue(results)
+
+    @inlineCallbacks
+    def remove_tcont(self, alloc_id):
+        tcont = self._tconts.get(alloc_id)
+
+        if tcont is None:
+            returnValue('nop')
+
+        del self._tconts[alloc_id]
+        try:
+            results = yield tcont.remove_from_hardware(self.olt.rest_client)
+
+        except RestInvalidResponseCode as e:
+            results = None
+            if e.code != 404:
+                self.log.exception('tcont-delete', e=e)
+
+        except Exception as e:
+            self.log.exception('delete', e=e)
+            raise
+
+        returnValue(results)
+
+    def gem_port(self, gem_id):
+        return self._gem_ports.get(gem_id)
+
+    def gem_ids(self, tech_profile_id):
+        """Get all GEM Port IDs used by this ONU"""
+        assert tech_profile_id >= DEFAULT_TECH_PROFILE_TABLE_ID
+        return sorted([gem_id for gem_id, gem in self._gem_ports.items()
+                       if not gem.multicast and
+                       tech_profile_id == gem.tech_profile_id])
+
+    @inlineCallbacks
+    def add_gem_port(self, gem_port, reflow=False):
+        """
+        Add a GEM Port to this ONU
+
+        :param gem_port: (GemPort) GEM Port to add
+        :param reflow: (boolean) If true, force add (used during h/w resync)
+        :return: (deferred)
+        """
+        if not self._valid:
+            returnValue('Deleting')
+
+        if not reflow and gem_port.gem_id in self._gem_ports:
+            returnValue('nop')
+
+        self.log.info('add', gem_port=gem_port, reflow=reflow)
+        self._gem_ports[gem_port.gem_id] = gem_port
+
+        try:
+            results = yield gem_port.add_to_hardware(self.olt.rest_client)
+
+        except Exception as e:
+            self.log.exception('gem-port', gem_port=gem_port, reflow=reflow, e=e)
+            results = 'resync needed'
+
+        returnValue(results)
+
+    @inlineCallbacks
+    def remove_gem_id(self, gem_id):
+        gem_port = self._gem_ports.get(gem_id)
+
+        if gem_port is None:
+            returnValue('nop')
+
+        del self._gem_ports[gem_id]
+        try:
+            yield gem_port.remove_from_hardware(self.olt.rest_client)
+
+        except RestInvalidResponseCode as e:
+            if e.code != 404:
+                self.log.exception('onu-delete', e=e)
+
+        except Exception as ex:
+            self.log.exception('gem-port-delete', e=ex)
+            raise
+
+        returnValue('done')
+
+    @staticmethod
+    def gem_id_to_gvid(gem_id):
+        """Calculate GEM VID (gvid) for a given GEM port id"""
+        return gem_id - 2048
diff --git a/adapters/adtran_olt/pon_port.py b/adapters/adtran_olt/pon_port.py
new file mode 100644
index 0000000..70ec564
--- /dev/null
+++ b/adapters/adtran_olt/pon_port.py
@@ -0,0 +1,886 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+import random
+import arrow
+
+import structlog
+from adapters.adtran_common.port import AdtnPort
+from twisted.internet import reactor, defer
+from twisted.internet.defer import inlineCallbacks, returnValue
+from adtran_olt_handler import AdtranOltHandler
+from adapters.adtran_common.net.adtran_rest import RestInvalidResponseCode
+from codec.olt_config import OltConfig
+from onu import Onu
+from pyvoltha.adapters.extensions.alarms.onu.onu_los_alarm import OnuLosAlarm
+from pyvoltha.adapters.extensions.alarms.onu.onu_discovery_alarm import OnuDiscoveryAlarm
+from pyvoltha.protos.common_pb2 import AdminState
+from pyvoltha.protos.device_pb2 import Port
+import resources.adtranolt_platform as platform
+
+
+class PonPort(AdtnPort):
+    """
+    GPON Port
+    """
+    MAX_ONUS_SUPPORTED = 128
+    MAX_DEPLOYMENT_RANGE = 25000    # Meters (OLT-PB maximum)
+
+    _MCAST_ONU_ID = 253
+    _MCAST_ALLOC_BASE = 0x500
+
+    # AutoActivate should be used if xPON configuration is not supported
+    _SUPPORTED_ACTIVATION_METHODS = ['autodiscovery', 'autoactivate']
+    _SUPPORTED_AUTHENTICATION_METHODS = ['serial-number']
+
+    def __init__(self, parent, **kwargs):
+        super(PonPort, self).__init__(parent, **kwargs)
+        assert 'pon-id' in kwargs, 'PON ID not found'
+
+        self._parent = parent
+        self._pon_id = kwargs['pon-id']
+        self.log = structlog.get_logger(device_id=parent.device_id, pon_id=self._pon_id)
+        self._port_no = kwargs['port_no']
+        self._physical_port_name = 'xpon 0/{}'.format(self._pon_id+1)
+        self._label = 'pon-{}'.format(self._pon_id)
+
+        self._in_sync = False
+        self._expedite_sync = False
+        self._expedite_count = 0
+
+        self._discovery_tick = 20.0
+        self._no_onu_discover_tick = self._discovery_tick / 2
+        self._discovered_onus = []  # List of serial numbers
+        self._discovery_deferred = None     # Specifically for ONU discovery
+
+        self._onus = {}                     # serial_number-base64 -> ONU
+        self._onu_by_id = {}                # onu-id -> ONU
+        self._mcast_gem_ports = {}          # VLAN -> GemPort
+
+        self._active_los_alarms = set()     # ONU-ID
+
+        # xPON configuration
+        self._activation_method = 'autoactivate'
+
+        self._downstream_fec_enable = True
+        self._upstream_fec_enable = True
+        self._deployment_range = 25000
+        self._authentication_method = 'serial-number'
+        self._mcast_aes = False
+
+        # Statistics
+        self.tx_bip_errors = 0
+
+    def __str__(self):
+        return "PonPort-{}: Admin: {}, Oper: {}, OLT: {}".format(self._label,
+                                                                 self._admin_state,
+                                                                 self._oper_status,
+                                                                 self.olt)
+
+    def get_port(self):
+        """
+        Get the VOLTHA PORT object for this port
+        :return: VOLTHA Port object
+        """
+        if self._port is None:
+            self._port = Port(port_no=self._port_no,
+                              label=self._label,
+                              type=Port.PON_OLT,
+                              admin_state=self._admin_state,
+                              oper_status=self._oper_status)
+
+        return self._port
+
+    @property
+    def pon_id(self):
+        return self._pon_id
+
+    @property
+    def onus(self):
+        """
+        Get a set of all ONUs.  While the set is immutable, do not use this method
+        to get a collection that you will iterate through that my yield the CPU
+        such as inline callback.  ONUs may be deleted at any time and they will
+        set some references to other objects to NULL during the 'delete' call.
+        Instead, get a list of ONU-IDs and iterate on these and call the 'onu'
+        method below (which will return 'None' if the ONU has been deleted.
+
+        :return: (frozenset) collection of ONU objects on this PON
+        """
+        return frozenset(self._onus.values())
+
+    @property
+    def onu_ids(self):
+        return frozenset(self._onu_by_id.keys())
+
+    def onu(self, onu_id):
+        return self._onu_by_id.get(onu_id)
+
+    @property
+    def in_service_onus(self):
+        return len({onu.onu_id for onu in self.onus
+                    if onu.onu_id not in self._active_los_alarms})
+
+    @property
+    def closest_onu_distance(self):
+        distance = -1
+        for onu in self.onus:
+            if onu.fiber_length < distance or distance == -1:
+                distance = onu.fiber_length
+        return distance
+
+    @property
+    def downstream_fec_enable(self):
+        return self._downstream_fec_enable
+
+    @downstream_fec_enable.setter
+    def downstream_fec_enable(self, value):
+        assert isinstance(value, bool), 'downstream FEC enabled is a boolean'
+
+        if self._downstream_fec_enable != value:
+            self._downstream_fec_enable = value
+            if self.state == AdtnPort.State.RUNNING:
+                self.deferred = self._set_pon_config("downstream-fec-enable", value)
+
+    @property
+    def upstream_fec_enable(self):
+        return self._upstream_fec_enable
+
+    @upstream_fec_enable.setter
+    def upstream_fec_enable(self, value):
+        assert isinstance(value, bool), 'upstream FEC enabled is a boolean'
+        if self._upstream_fec_enable != value:
+            self._upstream_fec_enable = value
+            if self.state == AdtnPort.State.RUNNING:
+                self.deferred = self._set_pon_config("upstream-fec-enable", value)
+
+    @property
+    def any_upstream_fec_enabled(self):
+        for onu in self.onus:
+            if onu.upstream_fec_enable and onu.enabled:
+                return True
+        return False
+
+    @property
+    def mcast_aes(self):
+        return self._mcast_aes
+
+    @mcast_aes.setter
+    def mcast_aes(self, value):
+        assert isinstance(value, bool), 'MCAST AES is a boolean'
+        if self._mcast_aes != value:
+            self._mcast_aes = value
+            if self.state == AdtnPort.State.RUNNING:
+                pass    # TODO
+
+    @property
+    def deployment_range(self):
+        """Maximum deployment range (in meters)"""
+        return self._deployment_range
+
+    @deployment_range.setter
+    def deployment_range(self, value):
+        """Maximum deployment range (in meters)"""
+        if not 0 <= value <= PonPort.MAX_DEPLOYMENT_RANGE:
+            raise ValueError('Deployment range should be 0..{} meters'.
+                             format(PonPort.MAX_DEPLOYMENT_RANGE))
+        if self._deployment_range != value:
+            self._deployment_range = value
+            if self.state == AdtnPort.State.RUNNING:
+                self.deferred = self._set_pon_config("deployment-range", value)
+
+    @property
+    def discovery_tick(self):
+        return self._discovery_tick * 10
+    
+    @discovery_tick.setter
+    def discovery_tick(self, value):
+        if value < 0:
+            raise ValueError("Polling interval must be >= 0")
+
+        if self.discovery_tick != value:
+            self._discovery_tick = value / 10
+
+            try:
+                if self._discovery_deferred is not None and \
+                        not self._discovery_deferred.called:
+                    self._discovery_deferred.cancel()
+            except:
+                pass
+            self._discovery_deferred = None
+
+            if self._discovery_tick > 0:
+                self._discovery_deferred = reactor.callLater(self._discovery_tick,
+                                                             self._discover_onus)
+
+    @property
+    def activation_method(self):
+        return self._activation_method
+
+    @activation_method.setter
+    def activation_method(self, value):
+        value = value.lower()
+        if value not in PonPort._SUPPORTED_ACTIVATION_METHODS:
+            raise ValueError('Invalid ONU activation method')
+
+        self._activation_method = value
+
+    @property
+    def authentication_method(self):
+        return self._authentication_method
+
+    @authentication_method.setter
+    def authentication_method(self, value):
+        value = value.lower()
+        if value not in PonPort._SUPPORTED_AUTHENTICATION_METHODS:
+            raise ValueError('Invalid ONU authentication method')
+        self._authentication_method = value
+
+    def cancel_deferred(self):
+        super(PonPort, self).cancel_deferred()
+
+        d, self._discovery_deferred = self._discovery_deferred, None
+
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except Exception as e:
+            pass
+
+    def _update_adapter_agent(self):
+        """
+        Update the port status and state in the core
+        """
+        self.log.debug('update-adapter-agent', admin_state=self._admin_state,
+                       oper_status=self._oper_status)
+
+        # because the core does not provide methods for updating admin
+        # and oper status per port, we need to copy any existing port
+        # info so that we don't wipe out the peers
+        if self._port is not None:
+            agent_ports = self.adapter_agent.get_ports(self.olt.device_id, Port.PON_OLT)
+
+            agent_port = next((ap for ap in agent_ports if ap.port_no == self._port_no), None)
+
+            # copy current Port info
+            if agent_port is not None:
+                self._port = agent_port
+
+        # set new states
+        self._port.admin_state = self._admin_state
+        self._port.oper_status = self._oper_status
+
+        # adapter_agent add_port also does an update of existing port
+        self.adapter_agent.add_port(self.olt.device_id, self.get_port())
+
+    @inlineCallbacks
+    def finish_startup(self):
+        """
+        Do all startup offline since REST may fail
+        """
+        if self.state != AdtnPort.State.INITIAL:
+            returnValue('Done')
+
+        self.log.debug('final-startup')
+        results = None
+
+        try:
+            self.deferred = self._get_pon_config()
+            results = yield self.deferred
+
+        except Exception as e:
+            self.log.exception('initial-GET', e=e)
+            self.deferred = reactor.callLater(5, self.finish_startup)
+            returnValue(self.deferred)
+
+        # Load config from hardware
+
+        enabled = results.get('enabled', False)
+        downstream_fec_enable = results.get('downstream-fec-enable', False)
+        upstream_fec_enable = results.get('upstream-fec-enable', False)
+        deployment_range = results.get('deployment-range', 25000)
+        self._in_sync = True
+
+        if enabled != self._enabled:
+            try:
+                self.deferred = self._set_pon_config("enabled", True)
+                yield self.deferred
+
+            except Exception as e:
+                self.log.exception('final-startup-enable', e=e)
+                self.deferred = reactor.callLater(3, self.finish_startup)
+                returnValue(self.deferred)
+
+        if downstream_fec_enable != self._downstream_fec_enable:
+            try:
+                self.deferred = self._set_pon_config("downstream-fec-enable",
+                                                     self._downstream_fec_enable)
+                yield self.deferred
+
+            except Exception as e:
+                self.log.warning('final-startup-downstream-FEC', e=e)
+                self._in_sync = False
+                # Non-fatal. May have failed due to no SFQ in slot
+
+        if upstream_fec_enable != self._upstream_fec_enable:
+            try:
+                self.deferred = self._set_pon_config("upstream-fec-enable",
+                                                     self._upstream_fec_enable)
+                yield self.deferred
+
+            except Exception as e:
+                self.log.warning('final-startup-upstream-FEC', e=e)
+                self._in_sync = False
+                # Non-fatal. May have failed due to no SFQ in slot
+
+        if deployment_range != self._deployment_range:
+            try:
+                self.deferred = self._set_pon_config("deployment-range",
+                                                     self._deployment_range)
+                yield self.deferred
+
+            except Exception as e:
+                self.log.warning('final-startup-deployment-range', e=e)
+                self._in_sync = False
+                # Non-fatal. May have failed due to no SFQ in slot
+
+        if len(self._onus) > 0:
+            dl = []
+            for onu_id in self.onu_ids:
+                onu = self.onu(onu_id)
+                if onu is not None:
+                    dl.append(onu.restart())
+            yield defer.gatherResults(dl, consumeErrors=True)
+
+        # Begin to ONU discovery and hardware sync
+
+        self._discovery_deferred = reactor.callLater(5, self._discover_onus)
+
+        # If here, initial settings were successfully written to hardware
+
+        super(PonPort, self).finish_startup()
+        returnValue('Enabled')
+
+    @inlineCallbacks
+    def finish_stop(self):
+        # Remove all existing ONUs. They will need to be re-discovered
+        dl = []
+        onu_ids = frozenset(self._onu_by_id.keys())
+        for onu_id in onu_ids:
+            try:
+                dl.append(self.delete_onu(onu_id))
+
+            except Exception as e:
+                self.log.exception('onu-cleanup', onu_id=onu_id, e=e)
+
+        dl.append(self._set_pon_config("enabled", False))
+        results = yield defer.gatherResults(dl, consumeErrors=True)
+        returnValue(results)
+
+    @inlineCallbacks
+    def reset(self):
+        """
+        Set the PON Port to a known good state on initial port startup.  Actual
+        PON 'Start' is done elsewhere
+        """
+        initial_port_state = AdminState.ENABLED
+        self.log.info('reset', initial_state=initial_port_state)
+
+        try:
+            self.deferred = self._get_pon_config()
+            results = yield self.deferred
+            enabled = results.get('enabled', False)
+
+        except Exception as e:
+            self.log.exception('get-config', e=e)
+            enabled = False
+
+        enable = initial_port_state == AdminState.ENABLED
+
+        if enable != enabled:
+            try:
+                self.deferred = yield self._set_pon_config("enabled", enable)
+            except Exception as e:
+                self.log.exception('reset-enabled', e=e, enabled=enabled)
+
+        # TODO: Move to 'set_pon_config' method and also make sure GRPC/Port is ok
+        self._admin_state = AdminState.ENABLED if enable else AdminState.DISABLED
+
+        try:
+            # Walk the provisioned ONU list and disable any existing ONUs
+            results = yield self._get_onu_config()
+
+            if isinstance(results, list) and len(results) > 0:
+                onu_configs = OltConfig.Pon.Onu.decode(results)
+                dl = []
+                for onu_id in onu_configs.iterkeys():
+                    dl.append(self.delete_onu(onu_id))
+
+                try:
+                    if len(dl) > 0:
+                        yield defer.gatherResults(dl, consumeErrors=True)
+
+                except Exception as e:
+                    self.log.exception('rest-ONU-delete', e=e)
+                    pass  # Non-fatal
+
+        except Exception as e:
+            self.log.exception('onu-delete', e=e)
+
+        returnValue('Reset complete')
+
+    def gem_ids(self, logical_port, flow_vlan, multicast_gems=False):
+        """
+        Get all GEM Port IDs used on a given PON
+
+        :param logical_port: (int) Logical port number of ONU. None if for all ONUs
+                          on PON, if Multicast, VID for Multicast, or None for all
+                          Multicast GEMPorts
+        :param flow_vlan: (int) If not None, this is the ingress tag (c-tag)
+        :param multicast_gems: (boolean) Select from available Multicast GEM Ports
+        :return: (dict) data_gem -> key -> onu-id, value -> tuple(sorted list of GEM Port IDs, onu_vid)
+                        mcast_gem-> key -> mcast-vid, value -> GEM Port IDs
+        """
+        gem_ids = {}
+
+        if multicast_gems:
+            # Multicast GEMs belong to the PON, but we may need to register them on
+            # all ONUs. TODO: Rework when BBF MCAST is addressed in VOLTHA v2.O+
+            for vlan, gem_port in self._mcast_gem_ports.iteritems():
+                if logical_port is None or (logical_port == vlan and logical_port in self.olt.multicast_vlans):
+                    gem_ids[vlan] = ([gem_port.gem_id], None)
+        else:
+            raise NotImplemented('TODO: This is deprecated')
+            # for onu_id, onu in self._onu_by_id.iteritems():
+            #     if logical_port is None or logical_port == onu.logical_port:
+            #         gem_ids[onu_id] = (onu.gem_ids(), flow_vlan)
+        return gem_ids
+
+    def _get_pon_config(self):
+        uri = AdtranOltHandler.GPON_PON_CONFIG_URI.format(self._pon_id)
+        name = 'pon-get-config-{}'.format(self._pon_id)
+        return self._parent.rest_client.request('GET', uri, name=name)
+
+    def _get_onu_config(self, onu_id=None):
+        if onu_id is None:
+            uri = AdtranOltHandler.GPON_ONU_CONFIG_LIST_URI.format(self._pon_id)
+        else:
+            uri = AdtranOltHandler.GPON_ONU_CONFIG_URI.format(self._pon_id, onu_id)
+
+        name = 'pon-get-onu_config-{}-{}'.format(self._pon_id, onu_id)
+        return self._parent.rest_client.request('GET', uri, name=name)
+
+    def _set_pon_config(self, leaf, value):
+        data = json.dumps({leaf: value})
+        uri = AdtranOltHandler.GPON_PON_CONFIG_URI.format(self._pon_id)
+        name = 'pon-set-config-{}-{}-{}'.format(self._pon_id, leaf, str(value))
+        # If no optics on PON, then PON config fails with status 400, suppress this
+        suppress_error = len(self.onu_ids) == 0
+        return self._parent.rest_client.request('PATCH', uri, data=data, name=name,
+                                                suppress_error=suppress_error)
+
+    def _discover_onus(self):
+        self.log.debug('discovery', state=self._admin_state, in_sync=self._in_sync)
+        if self._admin_state == AdminState.ENABLED:
+            if self._in_sync:
+                data = json.dumps({'pon-id': self._pon_id})
+                uri = AdtranOltHandler.GPON_PON_DISCOVER_ONU
+                name = 'pon-discover-onu-{}'.format(self._pon_id)
+
+                self._discovery_deferred = self._parent.rest_client.request('POST', uri, data, name=name)
+                self._discovery_deferred.addBoth(self._onu_discovery_init_complete)
+            else:
+                self.discovery_deferred = reactor.callLater(0,
+                                                            self._onu_discovery_init_complete,
+                                                            None)
+
+    def _onu_discovery_init_complete(self, _result):
+        """
+        This method is called after the REST POST to request ONU discovery is
+        completed.  The results (body) of the post is always empty / 204 NO CONTENT
+        """
+        delay = self._no_onu_discover_tick if len(self._onus) == 0 else self._discovery_tick
+        delay += random.uniform(-delay / 10, delay / 10)
+        self._discovery_deferred = reactor.callLater(delay, self._discover_onus)
+
+    def sync_hardware(self):
+        if self.state == AdtnPort.State.RUNNING or self.state == AdtnPort.State.STOPPED:
+            def read_config(results):
+                self.log.debug('read-config', results=results)
+                config = OltConfig.Pon.decode([results])
+                assert self.pon_id in config, 'sync-pon-not-found-{}'.format(self.pon_id)
+                config = config[self.pon_id]
+                self._in_sync = True
+
+                dl = []
+
+                if self.enabled != config.enabled:
+                    self._in_sync = False
+                    self._expedite_sync = True
+                    dl.append(self._set_pon_config("enabled", self.enabled))
+
+                elif self.state == AdtnPort.State.RUNNING:
+                    if self.deployment_range != config.deployment_range:
+                        self._in_sync = False
+                        self._expedite_sync = True
+                        dl.append(self._set_pon_config("deployment-range",
+                                                       self.deployment_range))
+
+                    # A little side note: FEC enable/disable cannot be changed and
+                    # will remain in the previous status until an optical module
+                    # is plugged in.
+                    if self.downstream_fec_enable != config.downstream_fec_enable:
+                        self._in_sync = False
+                        dl.append(self._set_pon_config("downstream-fec-enable",
+                                                       self.downstream_fec_enable))
+
+                    if self.upstream_fec_enable != config.upstream_fec_enable:
+                        self._in_sync = False
+                        self._expedite_sync = True
+                        dl.append(self._set_pon_config("upstream-fec-enable",
+                                                       self.upstream_fec_enable))
+                defer.gatherResults(dl, consumeErrors=True)
+                return config.onus
+
+            def sync_onus(hw_onus):
+                if self.state == AdtnPort.State.RUNNING:
+                    self.log.debug('sync-pon-onu-results', config=hw_onus)
+
+                    # ONU's have their own sync task, extra (should be deleted) are
+                    # handled here.
+                    hw_onu_ids = frozenset(hw_onus.keys())
+                    my_onu_ids = frozenset(self._onu_by_id.keys())
+
+                    extra_onus = hw_onu_ids - my_onu_ids
+                    dl = [self.delete_onu(onu_id, hw_only=True) for onu_id in extra_onus]
+
+                    if self.activation_method == "autoactivate":
+                        # Autoactivation of ONUs requires missing ONU detection. If
+                        # not found, create them here but let the TCont/GEM-Port restore
+                        # be handle by ONU H/w sync logic.
+                        for onu in [self._onu_by_id[onu_id] for onu_id in my_onu_ids - hw_onu_ids
+                                    if self._onu_by_id.get(onu_id) is not None]:
+                            dl.append(onu.create(reflow=True))
+
+                    return defer.gatherResults(dl, consumeErrors=True)
+
+            def failure(reason, what):
+                self.log.error('hardware-sync-{}-failed'.format(what), reason=reason)
+                self._in_sync = False
+                self._expedite_sync = False
+
+            def reschedule(_):
+                # Speed up sequential resync a limited number of times if out of sync.
+
+                delay = self.sync_tick
+
+                if self._expedite_sync:
+                    self._expedite_count += 1
+                    if self._expedite_count < 5:
+                        delay = 1
+                else:
+                    self._expedite_count = 0
+
+                delay += random.uniform(-delay / 10, delay / 10)
+                self.sync_deferred = reactor.callLater(delay, self.sync_hardware)
+
+            self.sync_deferred = self._get_pon_config()
+            self.sync_deferred.addCallbacks(read_config, failure, errbackArgs=['get-config'])
+            self.sync_deferred.addCallbacks(sync_onus, failure, errbackArgs=['pon-sync'])
+            self.sync_deferred.addBoth(reschedule)
+
+    def process_status_poll(self, status):
+        """
+        Process PON status poll request
+        
+        :param status: (OltState.Pon object) results from RESTCONF GET
+        """
+        self.log.debug('process-status-poll', status=status)
+
+        if self._admin_state != AdminState.ENABLED:
+            return
+
+        # Process LOS list
+        self._process_los_alarms(frozenset(status.ont_los))
+
+        # Get new/missing from the discovered ONU leaf.  Stale ONUs from previous
+        # configs are now cleaned up during h/w re-sync/reflow.
+        new, rediscovered_onus = self._process_status_onu_discovered_list(status.discovered_onu)
+
+        # Process newly discovered ONU list and rediscovered ONUs
+        for serial_number in new | rediscovered_onus:
+            reactor.callLater(0, self.add_onu, serial_number, status)
+
+        # PON Statistics
+        timestamp = arrow.utcnow().float_timestamp
+        self._process_statistics(status, timestamp)
+
+        # Process ONU info. Note that newly added ONUs will not be processed
+        # until the next pass
+        self._update_onu_status(status.onus, timestamp)
+
+        # Process GEM Port information
+        self._update_gem_status(status.gems, timestamp)
+
+    def _process_statistics(self, status, timestamp):
+        self.timestamp = timestamp
+        self.rx_packets = status.rx_packets
+        self.rx_bytes = status.rx_bytes
+        self.tx_packets = status.tx_packets
+        self.tx_bytes = status.tx_bytes
+        self.tx_bip_errors = status.tx_bip_errors
+
+    def _update_onu_status(self, onus, timestamp):
+        """
+        Process ONU status for this PON
+        :param onus: (dict) onu_id: ONU State
+        """
+        for onu_id, onu_status in onus.iteritems():
+            if onu_id in self._onu_by_id:
+                onu = self._onu_by_id[onu_id]
+                onu.timestamp = timestamp
+                onu.rssi = onu_status.rssi
+                onu.equalization_delay = onu_status.equalization_delay
+                onu.equalization_delay = onu_status.equalization_delay
+                onu.fiber_length = onu_status.fiber_length
+                onu.password = onu_status.reported_password
+
+    def _update_gem_status(self, gems, timestamp):
+        for gem_id, gem_status in gems.iteritems():
+            onu = self._onu_by_id.get(gem_status.onu_id)
+            if onu is not None:
+                gem_port = onu.gem_port(gem_status.gem_id)
+                if gem_port is not None:
+                    gem_port.timestamp = timestamp
+                    gem_port.rx_packets = gem_status.rx_packets
+                    gem_port.rx_bytes = gem_status.rx_bytes
+                    gem_port.tx_packets = gem_status.tx_packets
+                    gem_port.tx_bytes = gem_status.tx_bytes
+
+    def _process_los_alarms(self, ont_los):
+        """
+        Walk current LOS and set/clear LOS as appropriate
+        :param ont_los: (frozenset) ONU IDs of ONUs in LOS alarm state
+        """
+        cleared_alarms = self._active_los_alarms - ont_los
+        new_alarms = ont_los - self._active_los_alarms
+
+        if len(cleared_alarms) > 0 or len(new_alarms) > 0:
+            self.log.info('onu-los', cleared=cleared_alarms, new=new_alarms)
+
+        for onu_id in cleared_alarms:
+            self._active_los_alarms.remove(onu_id)
+            OnuLosAlarm(self.olt.alarms, onu_id, self.port_no).clear_alarm()
+
+        for onu_id in new_alarms:
+            self._active_los_alarms.add(onu_id)
+            OnuLosAlarm(self.olt.alarms, onu_id, self.port_no).raise_alarm()
+            reactor.callLater(0, self.delete_onu, onu_id)
+
+    def _process_status_onu_discovered_list(self, discovered_onus):
+        """
+        Look for new ONUs
+        
+        :param discovered_onus: (frozenset) Set of ONUs currently discovered
+        """
+        self.log.debug('discovered-ONUs', list=discovered_onus)
+
+        # Only request discovery if activation is auto-discovery or auto-activate
+        continue_discovery = ['autodiscovery', 'autoactivate']
+
+        if self._activation_method not in continue_discovery:
+            return set(), set()
+
+        my_onus = frozenset(self._onus.keys())
+
+        new_onus = discovered_onus - my_onus
+        rediscovered_onus = my_onus & discovered_onus
+
+        return new_onus, rediscovered_onus
+
+    def _get_onu_info(self, serial_number):
+        """
+        Parse through available xPON information for ONU configuration settings
+
+        :param serial_number: (string) Decoded (not base64) serial number string
+        :return: (dict) onu config data or None on lookup failure
+        """
+        try:
+            if self.activation_method == "autodiscovery":
+                # if self.authentication_method == 'serial-number':
+                raise NotImplemented('autodiscovery: Not supported at this time')
+
+            elif self.activation_method == "autoactivate":
+                onu_id = self.get_next_onu_id
+                enabled = True
+                upstream_fec_enabled = True
+
+            else:
+                self.log.error('unsupported-activation-method', method=self.activation_method)
+                return None
+
+            onu_info = {
+                'device-id': self.olt.device_id,
+                'serial-number': serial_number,
+                'pon': self,
+                'onu-id': onu_id,
+                'enabled': enabled,
+                'upstream-fec': upstream_fec_enabled,
+                'password': Onu.DEFAULT_PASSWORD,
+            }
+            pon_id = self.olt.pon_id_to_port_number(self._pon_id)
+
+            # TODO: Currently only one  UNI port and it is hardcoded to port 0
+            onu_info['uni-ports'] = [platform.mk_uni_port_num(pon_id, onu_id)]
+
+            # return onu_info
+            return onu_info
+
+        except Exception as e:
+            self.log.exception('get-onu-info-tech-profiles', e=e)
+            return None
+
+    @inlineCallbacks
+    def add_onu(self, serial_number_64, status):
+        """
+        Add an ONU to the PON
+
+        :param serial_number_64: (str) base-64 encoded serial number
+        :param status: (dict) OLT PON status. Used to detect if ONU is already provisioned
+        """
+        serial_number = Onu.serial_number_to_string(serial_number_64)
+        self.log.info('add-onu', serial_number=serial_number,
+                      serial_number_64=serial_number_64, status=status)
+
+        # It takes a little while for a new ONU to be removed from the discovery
+        # list. Return early here so extra ONU IDs are not allocated
+        if serial_number_64 in self._onus:
+            returnValue('wait-for-fpga')
+
+        if serial_number_64 in status.onus:
+            # Handles fast entry into this task before FPGA can clear results of ONU delete
+            returnValue('sticky-onu')
+
+        # At our limit?   TODO: Retrieve from device resource manager if available
+        if len(self._onus) >= self.MAX_ONUS_SUPPORTED:
+            self.log.warning('max-onus-provisioned', count=len(self._onus))
+            returnValue('max-onus-reached')
+
+        onu_info = self._get_onu_info(serial_number)
+        onu_id = onu_info['onu-id']
+
+        if onu_id is None:
+            self.log.warning('no-onu-ids-available', serial_number=serial_number,
+                             serial_number_64=serial_number_64)
+            returnValue('no-ids-available')
+
+        # TODO: Is the best before or after creation in parent device?
+        alarm = OnuDiscoveryAlarm(self.olt.alarms, self.pon_id, serial_number)
+        reactor.callLater(0, alarm.raise_alarm)
+
+        # Have the core create the ONU device
+        self._parent.add_onu_device(self.pon_id, onu_id, serial_number)
+
+        try:
+            onu = Onu(onu_info)
+            self._onus[serial_number_64] = onu
+            self._onu_by_id[onu.onu_id] = onu
+
+            # Add Multicast to PON on a per-ONU basis
+            #
+            # for id_or_vid, gem_port in gem_ports.iteritems():
+            #     try:
+            #         if gem_port.multicast:
+            #             self.log.debug('id-or-vid', id_or_vid=id_or_vid)
+            #             vid = self.olt.multicast_vlans[0] if len(self.olt.multicast_vlans) else None
+            #             if vid is not None:
+            #                 self.add_mcast_gem_port(gem_port, vid)
+            #
+            #     except Exception as e:
+            #         self.log.exception('id-or-vid', e=e)
+
+            _results = yield onu.create()
+
+        except Exception as e:
+            self.log.warning('add-onu', serial_number=serial_number_64, e=e)
+            # allowable exception.  H/w re-sync will recover/fix any issues
+
+    @property
+    def get_next_onu_id(self):
+        return self._parent.resource_mgr.get_onu_id(self._pon_id)
+
+    def release_onu_id(self, onu_id):
+        self._parent.resource_mgr.free_onu_id(self._pon_id, onu_id)
+
+    @inlineCallbacks
+    def _remove_from_hardware(self, onu_id):
+        uri = AdtranOltHandler.GPON_ONU_CONFIG_URI.format(self._pon_id, onu_id)
+        name = 'pon-delete-onu-{}-{}'.format(self._pon_id, onu_id)
+
+        try:
+            yield self._parent.rest_client.request('DELETE', uri, name=name)
+
+        except RestInvalidResponseCode as e:
+            if e.code != 404:
+                self.log.exception('onu-delete', e=e)
+
+        except Exception as e:
+            self.log.exception('onu-hw-delete', onu_id=onu_id, e=e)
+
+    @inlineCallbacks
+    def delete_onu(self, onu_id, hw_only=False):
+        onu = self._onu_by_id.get(onu_id)
+
+        # Remove from any local dictionary
+        if onu_id in self._onu_by_id:
+            del self._onu_by_id[onu_id]
+
+        if onu is not None:
+            if onu.serial_number_64 in self._onus:
+                del self._onus[onu.serial_number_64]
+            try:
+                proxy_address = onu.proxy_address
+                onu.delete()                            # Remove from hardware
+
+                # And removal from VOLTHA adapter agent
+                if not hw_only:
+                    self._parent.delete_child_device(proxy_address)
+
+            except Exception as e:
+                self.log.exception('onu-delete', serial_number=onu.serial_number, e=e)
+        else:
+            try:
+                yield self._remove_from_hardware(onu_id)
+
+            except Exception as e:
+                self.log.debug('onu-remove', serial_number=onu.serial_number, e=e)
+
+        # Remove from LOS list if needed  TODO: Should a 'clear' alarm be sent as well ?
+        if onu is not None and onu.id in self._active_los_alarms:
+            self._active_los_alarms.remove(onu.id)
+
+    def add_mcast_gem_port(self, mcast_gem, vlan):
+        """
+        Add any new Multicast GEM Ports to the PON
+        :param mcast_gem: (GemPort)
+        """
+        if vlan in self._mcast_gem_ports:
+            return
+
+        assert len(self._mcast_gem_ports) == 0, 'Only 1 MCAST GEMPort until BBF Support'
+        assert 1 <= vlan <= 4095, 'Invalid Multicast VLAN ID'
+        assert len(self.olt.multicast_vlans) == 1, 'Only support 1 MCAST VLAN until BBF Support'
+
+        self._mcast_gem_ports[vlan] = mcast_gem
diff --git a/adapters/adtran_olt/resources/__init__.py b/adapters/adtran_olt/resources/__init__.py
new file mode 100644
index 0000000..9c454e3
--- /dev/null
+++ b/adapters/adtran_olt/resources/__init__.py
@@ -0,0 +1,14 @@
+# Copyright 2018-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
diff --git a/adapters/adtran_olt/resources/adtran_olt_resource_manager.py b/adapters/adtran_olt/resources/adtran_olt_resource_manager.py
new file mode 100644
index 0000000..caf5a46
--- /dev/null
+++ b/adapters/adtran_olt/resources/adtran_olt_resource_manager.py
@@ -0,0 +1,295 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+import structlog
+
+from pyvoltha.adapters.common.pon_resource_manager.resource_manager import PONResourceManager
+from pyvoltha.common.utils.registry import registry
+# from voltha.core.config.config_backend import ConsulStore
+# from voltha.core.config.config_backend import EtcdStore
+from pyvoltha.adapters.common.kvstore.kvstore import create_kv_client
+from adtran_resource_manager import AdtranPONResourceManager
+
+
+class AdtranOltResourceMgr(object):
+
+    GEMPORT_IDS = "gemport_ids"
+    ALLOC_IDS = "alloc_ids"
+    BASE_PATH_KV_STORE = "adtran_olt/{}"       # adtran_olt/<device_id>
+
+    def __init__(self, device_id, host_and_port, extra_args, device_info):
+        self.log = structlog.get_logger(id=device_id,
+                                        ip=host_and_port)
+        self.device_id = device_id
+        self.host_and_port = host_and_port
+        self.extra_args = extra_args
+        self.device_info = device_info
+        self.args = registry('main').get_args()
+        self._path_prefix = AdtranOltResourceMgr.BASE_PATH_KV_STORE.format(device_id)
+
+        # KV store's IP Address and PORT
+        # host, port = '127.0.0.1', 8500
+        if self.args.backend == 'etcd':
+            host, port = self.args.etcd.split(':', 1)
+            self.kv_store = create_kv_client('etcd', host, port)
+            # self.kv_store = EtcdStore(host, port,
+            #                           AdtranOltResourceMgr.BASE_PATH_KV_STORE.format(device_id))
+        elif self.args.backend == 'consul':
+            host, port = self.args.consul.split(':', 1)
+            self.kv_store = create_kv_client('consul', host, port)
+            # self.kv_store = ConsulStore(host, port,
+            #                             AdtranOltResourceMgr.BASE_PATH_KV_STORE.format(device_id))
+        else:
+            self.log.error('Invalid-backend')
+            raise Exception("Invalid-backend-for-kv-store")
+
+        self.resource_mgr = AdtranPONResourceManager(
+            self.device_info.technology,
+            self.extra_args,
+            self.device_id, self.args.backend,
+            host, port
+        )
+        # Tech profiles uses this resource manager to retrieve information on a per-interface
+        # basis
+        self.resource_managers = {intf_id: self.resource_mgr for intf_id in device_info.intf_ids}
+
+        # Flag to indicate whether information fetched from device should
+        # be used to initialize PON Resource Ranges
+        self.use_device_info = False
+
+        self.initialize_device_resource_range_and_pool()
+
+    def __del__(self):
+        self.log.info("clearing-device-resource-pool")
+        for key, resource_mgr in self.resource_mgrs.iteritems():
+            resource_mgr.clear_device_resource_pool()
+
+    def get_onu_id(self, pon_intf_id):
+        onu_id = self.resource_mgr.get_resource_id(pon_intf_id,
+                                                   PONResourceManager.ONU_ID,
+                                                   onu_id=None,
+                                                   num_of_id=1)
+        if onu_id is not None:
+            pon_intf_onu_id = (pon_intf_id, onu_id)
+            self.resource_mgr.init_resource_map(pon_intf_onu_id)
+
+        return onu_id
+
+    def free_onu_id(self, pon_intf_id, onu_id):
+        self.resource_mgr.free_resource_id(pon_intf_id,
+                                           PONResourceManager.ONU_ID,
+                                           onu_id)
+        pon_intf_onu_id = (pon_intf_id, onu_id)
+        self.resource_mgr.remove_resource_map(pon_intf_onu_id)
+
+    def get_alloc_id(self, pon_intf_onu_id):
+        # Derive the pon_intf from the pon_intf_onu_id tuple
+        pon_intf = pon_intf_onu_id[0]
+        onu_id = pon_intf_onu_id[1]
+        alloc_id_list = self.resource_mgr.get_current_alloc_ids_for_onu(pon_intf_onu_id)
+
+        if alloc_id_list and len(alloc_id_list) > 0:
+            # Since we support only one alloc_id for the ONU at the moment,
+            # return the first alloc_id in the list, if available, for that
+            # ONU.
+            return alloc_id_list[0]
+
+        alloc_id_list = self.resource_mgr.get_resource_id(pon_intf,
+                                                          PONResourceManager.ALLOC_ID,
+                                                          onu_id=onu_id,
+                                                          num_of_id=1)
+        if alloc_id_list and len(alloc_id_list) == 0:
+            self.log.error("no-alloc-id-available")
+            return None
+
+        # update the resource map on KV store with the list of alloc_id
+        # allocated for the pon_intf_onu_id tuple
+        self.resource_mgr.update_alloc_ids_for_onu(pon_intf_onu_id,
+                                                   alloc_id_list)
+
+        # Since we request only one alloc id, we refer the 0th
+        # index
+        alloc_id = alloc_id_list[0]
+
+        return alloc_id
+
+    def get_gemport_id(self, pon_intf_onu_id, num_of_id=1):
+        # TODO: Remove this if never used
+        # Derive the pon_intf and onu_id from the pon_intf_onu_id tuple
+        pon_intf = pon_intf_onu_id[0]
+        onu_id = pon_intf_onu_id[1]
+        uni_id = pon_intf_onu_id[2]
+        assert False, 'unused function'
+
+        # gemport_id_list = self.resource_managers[pon_intf].get_current_gemport_ids_for_onu(
+        #     pon_intf_onu_id)
+        # if gemport_id_list and len(gemport_id_list) > 0:
+        #     return gemport_id_list
+        #
+        # gemport_id_list = self.resource_mgrs[pon_intf].get_resource_id(
+        #     pon_intf_id=pon_intf,
+        #     resource_type=PONResourceManager.GEMPORT_ID,
+        #     num_of_id=num_of_id
+        # )
+        #
+        # if gemport_id_list and len(gemport_id_list) == 0:
+        #     self.log.error("no-gemport-id-available")
+        #     return None
+        #
+        # # update the resource map on KV store with the list of gemport_id
+        # # allocated for the pon_intf_onu_id tuple
+        # self.resource_managers[pon_intf].update_gemport_ids_for_onu(pon_intf_onu_id,
+        #                                                             gemport_id_list)
+        #
+        # self.update_gemports_ponport_to_onu_map_on_kv_store(gemport_id_list,
+        #                                                     pon_intf, onu_id, uni_id)
+        # return gemport_id_list
+
+    def free_pon_resources_for_onu(self, pon_intf_id_onu_id):
+        """ Typically called on ONU delete """
+
+        pon_intf_id = pon_intf_id_onu_id[0]
+        onu_id = pon_intf_id_onu_id[1]
+        try:
+            alloc_ids = self.resource_mgr.get_current_alloc_ids_for_onu(pon_intf_id_onu_id)
+            if alloc_ids is not None:
+                self.resource_mgr.free_resource_id(pon_intf_id,
+                                                   PONResourceManager.ALLOC_ID,
+                                                   alloc_ids, onu_id=onu_id)
+        except:
+            pass
+
+        try:
+            gemport_ids = self.resource_mgr.get_current_gemport_ids_for_onu(pon_intf_id_onu_id)
+            if gemport_ids is not None:
+                self.resource_mgr.free_resource_id(pon_intf_id,
+                                                   PONResourceManager.GEMPORT_ID,
+                                                   gemport_ids)
+        except:
+            pass
+
+        try:
+            self.resource_mgr.free_resource_id(pon_intf_id,
+                                               PONResourceManager.ONU_ID,
+                                               onu_id)
+        except:
+            pass
+
+        # Clear resource map associated with (pon_intf_id, gemport_id) tuple.
+        self.resource_mgr.remove_resource_map(pon_intf_id_onu_id)
+
+        # Clear the ONU Id associated with the (pon_intf_id, gemport_id) tuple.
+        if gemport_ids is not None:
+            for gemport_id in gemport_ids:
+                try:
+                    self.kv_store.delete(self._make_path(str((pon_intf_id, gemport_id))))
+                    # del self.kv_store[str((pon_intf_id, gemport_id))]
+                except:
+                    pass
+
+    def initialize_device_resource_range_and_pool(self):
+        if not self.use_device_info:
+            status = self.resource_mgr.init_resource_ranges_from_kv_store()
+            if not status:
+                self.log.error("failed-to-load-resource-range-from-kv-store")
+                # When we have failed to read the PON Resource ranges from KV
+                # store, use the information selected as the default.
+                self.use_device_info = True
+
+        if self.use_device_info:
+            self.log.info("using-device-info-to-init-pon-resource-ranges")
+            self.resource_mgr.init_default_pon_resource_ranges(
+                onu_id_start_idx=self.device_info.onu_id_start,
+                onu_id_end_idx=self.device_info.onu_id_end,
+                alloc_id_start_idx=self.device_info.alloc_id_start,
+                alloc_id_end_idx=self.device_info.alloc_id_end,
+                gemport_id_start_idx=self.device_info.gemport_id_start,
+                gemport_id_end_idx=self.device_info.gemport_id_end,
+                num_of_pon_ports=self.device_info.pon_ports,
+                intf_ids=self.device_info.intf_ids
+            )
+
+        # After we have initialized resource ranges, initialize the
+        # resource pools accordingly.
+        self.resource_mgr.init_device_resource_pool()
+
+    def get_current_gemport_ids_for_onu(self, pon_intf_onu_id):
+        pon_intf_id = pon_intf_onu_id[0]
+        return self.resource_managers[pon_intf_id].get_current_gemport_ids_for_onu(pon_intf_onu_id)
+
+    def get_current_alloc_ids_for_onu(self, pon_intf_onu_id):
+        pon_intf_id = pon_intf_onu_id[0]
+        alloc_ids = self.resource_managers[pon_intf_id].get_current_alloc_ids_for_onu(pon_intf_onu_id)
+        if alloc_ids is None:
+            return None
+        # We support only one tcont at the moment
+        return alloc_ids[0]
+
+    def update_gemports_ponport_to_onu_map_on_kv_store(self, gemport_list, pon_port, onu_id, uni_id):
+        for gemport in gemport_list:
+            pon_intf_gemport = (pon_port, gemport)
+            # This information is used when packet_indication is received and
+            # we need to derive the ONU Id for which the packet arrived based
+            # on the pon_intf and gemport available in the packet_indication
+            # self.kv_store[str(pon_intf_gemport)] = ' '.join(map(str, (onu_id, uni_id)))
+            self.kv_store.put(self._make_path(str(pon_intf_gemport)), ' '.join(map(str, (onu_id, uni_id)))
+
+    def get_onu_uni_from_ponport_gemport(self, pon_port, gemport):
+        pon_intf_gemport = (pon_port, gemport)
+        #return tuple(map(int, self.kv_store[str(pon_intf_gemport)].split(' ')))
+        return tuple(map(int, self.kv_store.get(self._make_path(str(pon_intf_gemport))).split(' ')))
+
+    def get_flow_id(self, pon_intf_id, onu_id, uni_id, flow_store_cookie, flow_category=None):
+        pon_intf_onu_id = (pon_intf_id, onu_id, uni_id)
+        try:
+            flow_ids = self.resource_managers[pon_intf_id]. \
+                get_current_flow_ids_for_onu(pon_intf_onu_id)
+            if flow_ids is not None:
+                for flow_id in flow_ids:
+                    flows = self.get_flow_id_info(pon_intf_id, onu_id, uni_id, flow_id)
+                    assert (isinstance(flows, list))
+                    for flow in flows:
+
+                        if flow_category is not None and \
+                                'flow_category' in flow and \
+                                flow['flow_category'] == flow_category:
+                            return flow_id
+                        if flow['flow_store_cookie'] == flow_store_cookie:
+                            return flow_id
+        except Exception as e:
+            self.log.error("error-retrieving-flow-info", e=e)
+
+        flow_id = self.resource_managers[pon_intf_id].get_resource_id(
+            pon_intf_onu_id[0], PONResourceManager.FLOW_ID)
+        if flow_id is not None:
+            self.resource_managers[pon_intf_id].update_flow_id_for_onu(
+                pon_intf_onu_id, flow_id
+            )
+
+        return flow_id
+
+    def get_flow_id_info(self, pon_intf_id, onu_id, uni_id, flow_id):
+        pon_intf_onu_id = (pon_intf_id, onu_id, uni_id)
+        return self.resource_managers[pon_intf_id].get_flow_id_info(pon_intf_onu_id, flow_id)
+
+    def get_current_flow_ids_for_uni(self, pon_intf_id, onu_id, uni_id):
+        pon_intf_onu_id = (pon_intf_id, onu_id, uni_id)
+        return self.resource_managers[pon_intf_id].get_current_flow_ids_for_onu(pon_intf_onu_id)
+
+    def update_flow_id_info_for_uni(self, pon_intf_id, onu_id, uni_id, flow_id, flow_data):
+        pon_intf_onu_id = (pon_intf_id, onu_id, uni_id)
+        return self.resource_managers[pon_intf_id].update_flow_id_info_for_onu(
+            pon_intf_onu_id, flow_id, flow_data)
\ No newline at end of file
diff --git a/adapters/adtran_olt/resources/adtran_resource_manager.py b/adapters/adtran_olt/resources/adtran_resource_manager.py
new file mode 100644
index 0000000..9f2a0a4
--- /dev/null
+++ b/adapters/adtran_olt/resources/adtran_resource_manager.py
@@ -0,0 +1,358 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""
+Resource Manager will be unique for each OLT device.
+
+It exposes APIs to create/free alloc_ids/onu_ids/gemport_ids. Resource Manager
+uses a KV store in backend to ensure resiliency of the data.
+"""
+from bitstring import BitArray
+import json
+from pyvoltha.adapters.common.pon_resource_manager.resource_manager import PONResourceManager
+import adtranolt_platform as platform
+
+
+class AdtranPONResourceManager(PONResourceManager):
+    """Implements APIs to initialize/allocate/release alloc/gemport/onu IDs."""
+
+    # Constants for internal usage.
+    ONU_MAP = 'onu_map'
+
+    def init_device_resource_pool(self):
+        """
+        Initialize resource pool for all PON ports.
+        """
+        for pon_id in self.intf_ids:
+            self.init_resource_id_pool(
+                pon_intf_id=pon_id,
+                resource_type=PONResourceManager.ONU_ID,
+                start_idx=self.pon_resource_ranges[PONResourceManager.ONU_ID_START_IDX],
+                end_idx=self.pon_resource_ranges[PONResourceManager.ONU_ID_END_IDX])
+
+            alloc_id_map = dict()
+            for onu_id in range(platform.MAX_ONUS_PER_PON):
+                alloc_id_map[onu_id] = [platform.mk_alloc_id(pon_id, onu_id, idx)
+                                        for idx in xrange(platform.MAX_TCONTS_PER_ONU)]
+
+            self.init_resource_id_pool(pon_intf_id=pon_id,
+                                       resource_type=PONResourceManager.ALLOC_ID,
+                                       resource_map=alloc_id_map)
+
+            self.init_resource_id_pool(
+                pon_intf_id=pon_id,
+                resource_type=PONResourceManager.GEMPORT_ID,
+                start_idx=self.pon_resource_ranges[PONResourceManager.GEMPORT_ID_START_IDX],
+                end_idx=self.pon_resource_ranges[PONResourceManager.GEMPORT_ID_END_IDX])
+
+    def clear_device_resource_pool(self):
+        """
+        Clear resource pool of all PON ports.
+        """
+        for pon_id in self.intf_ids:
+            self.clear_resource_id_pool(pon_intf_id=pon_id,
+                                        resource_type=PONResourceManager.ONU_ID)
+
+            self.clear_resource_id_pool(
+                pon_intf_id=pon_id,
+                resource_type=PONResourceManager.ALLOC_ID,
+            )
+
+            self.clear_resource_id_pool(
+                pon_intf_id=pon_id,
+                resource_type=PONResourceManager.GEMPORT_ID,
+            )
+            self.clear_resource_id_pool(
+                pon_intf_id=pon_id,
+                resource_type=PONResourceManager.FLOW_ID,
+            )
+
+    def init_resource_id_pool(self, pon_intf_id, resource_type, start_idx=None,
+                              end_idx=None, resource_map=None):
+        """
+        Initialize Resource ID pool for a given Resource Type on a given PON Port
+
+        :param pon_intf_id: OLT PON interface id
+        :param resource_type: String to identify type of resource
+        :param start_idx: start index for onu id pool
+        :param end_idx: end index for onu id pool
+        :param resource_map: (dict) Resource map if per-ONU specific
+        :return boolean: True if resource id pool initialized else false
+        """
+        status = False
+        path = self._get_path(pon_intf_id, resource_type)
+        if path is None:
+            return status
+
+        try:
+            # In case of adapter reboot and reconciliation resource in kv store
+            # checked for its presence if not kv store update happens
+            resource = self._get_resource(path)
+
+            if resource is not None:
+                self._log.info("Resource-already-present-in-store", path=path)
+                status = True
+
+            else:
+                if resource_map is None:
+                    resource = self._format_resource(pon_intf_id, start_idx, end_idx)
+                    self._log.info("Resource-initialized", path=path)
+
+                else:
+                    resource = self._format_map_resource(pon_intf_id, resource_map)
+
+                # Add resource as json in kv store.
+                status = self._kv_store.update_to_kv_store(path, resource)
+
+        except Exception as e:
+            self._log.exception("error-initializing-resource-pool", e=e)
+
+        return status
+
+    def _generate_next_id(self, resource, onu_id=None):
+        """
+        Generate unique id having OFFSET as start index.
+
+        :param resource: resource used to generate ID
+        :return int: generated id
+        """
+        if onu_id is not None:
+            resource = resource[AdtranPONResourceManager.ONU_MAP][str(onu_id)]
+
+        pos = resource[PONResourceManager.POOL].find('0b0')
+        resource[PONResourceManager.POOL].set(1, pos)
+        return pos[0] + resource[PONResourceManager.START_IDX]
+
+    def _release_id(self, resource, unique_id, onu_id=None):
+        """
+        Release unique id having OFFSET as start index.
+
+        :param resource: resource used to release ID
+        :param unique_id: id need to be released
+        :param onu_id: ONU ID if unique per ONU
+        """
+        if onu_id is not None:
+            resource = resource[AdtranPONResourceManager.ONU_MAP][str(onu_id)]
+
+        pos = ((int(unique_id)) - resource[PONResourceManager.START_IDX])
+        resource[PONResourceManager.POOL].set(0, pos)
+
+    def get_resource_id(self, pon_intf_id, resource_type, onu_id=None, num_of_id=1):
+        """
+        Create alloc/gemport/onu id for given OLT PON interface.
+
+        :param pon_intf_id: OLT PON interface id
+        :param resource_type: String to identify type of resource
+        :param num_of_id: required number of ids
+        :param onu_id: ONU ID if unique per ONU  (Used for Alloc IDs)
+        :return list/int/None: list, int or None if resource type is
+                               alloc_id/gemport_id, onu_id or invalid type
+                               respectively
+        """
+        result = None
+
+        if num_of_id < 1:
+            self._log.error("invalid-num-of-resources-requested")
+            return result
+
+        path = self._get_path(pon_intf_id, resource_type)
+        if path is None:
+            return result
+
+        try:
+            resource = self._get_resource(path, onu_id)
+            if resource is not None and \
+                    (resource_type == PONResourceManager.ONU_ID or
+                     resource_type == PONResourceManager.FLOW_ID):
+                result = self._generate_next_id(resource)
+
+            elif resource is not None and \
+                    resource_type == PONResourceManager.GEMPORT_ID:
+                if num_of_id == 1:
+                    result = self._generate_next_id(resource)
+                else:
+                    result = [self._generate_next_id(resource) for _ in range(num_of_id)]
+
+            elif resource is not None and \
+                    resource_type == PONResourceManager.ALLOC_ID:
+                if num_of_id == 1:
+                    result = self._generate_next_id(resource, onu_id)
+                else:
+                    result = [self._generate_next_id(resource, onu_id) for _ in range(num_of_id)]
+            else:
+                raise Exception("get-resource-failed")
+
+            self._log.debug("Get-" + resource_type + "-success", result=result,
+                            path=path)
+            # Update resource in kv store
+            self._update_resource(path, resource, onu_id=onu_id)
+
+        except Exception as e:
+            self._log.exception("Get-" + resource_type + "-id-failed",
+                                path=path, e=e)
+        return result
+
+    def free_resource_id(self, pon_intf_id, resource_type, release_content, onu_id=None):
+        """
+        Release alloc/gemport/onu id for given OLT PON interface.
+
+        :param pon_intf_id: OLT PON interface id
+        :param resource_type: String to identify type of resource
+        :param release_content: required number of ids
+        :param onu_id: ONU ID if unique per ONU
+        :return boolean: True if all IDs in given release_content released
+                         else False
+        """
+        status = False
+
+        path = self._get_path(pon_intf_id, resource_type)
+        if path is None:
+            return status
+
+        try:
+            resource = self._get_resource(path, onu_id=onu_id)
+            if resource is None:
+                raise Exception("get-resource-for-free-failed")
+
+            if resource_type == PONResourceManager.ONU_ID:
+                self._release_id(resource, release_content)
+
+            elif resource_type == PONResourceManager.ALLOC_ID:
+                for content in release_content:
+                    self._release_id(resource, content)
+
+            elif resource_type == PONResourceManager.GEMPORT_ID:
+                for content in release_content:
+                    self._release_id(resource, content, onu_id)
+            else:
+                raise Exception("get-resource-for-free-failed")
+
+            self._log.debug("Free-" + resource_type + "-success", path=path)
+
+            # Update resource in kv store
+            status = self._update_resource(path, resource, onu_id=onu_id)
+
+        except Exception as e:
+            self._log.exception("Free-" + resource_type + "-failed",
+                                path=path, e=e)
+        return status
+
+    def _update_resource(self, path, resource, onu_id=None):
+        """
+        Update resource in resource kv store.
+
+        :param path: path to update resource
+        :param resource: resource need to be updated
+        :return boolean: True if resource updated in kv store else False
+        """
+        if 'alloc_id' in path.lower():
+            assert onu_id is not None
+            poolResource = resource[AdtranPONResourceManager.ONU_MAP][str(onu_id)]
+            poolResource[PONResourceManager.POOL] = \
+                poolResource[PONResourceManager.POOL].bin
+        else:
+            resource[PONResourceManager.POOL] = \
+                resource[PONResourceManager.POOL].bin
+
+        return self._kv_store.update_to_kv_store(path, json.dumps(resource))
+
+    def _get_resource(self, path, onu_id=None):
+        """
+        Get resource from kv store.
+
+        :param path: path to get resource
+        :return: resource if resource present in kv store else None
+        """
+        # get resource from kv store
+        result = self._kv_store.get_from_kv_store(path)
+        if result is None:
+            return result
+
+        self._log.info("dumping-resource", result=result)
+        resource = result
+
+        if resource is not None:
+            # decode resource fetched from backend store to dictionary
+            resource = json.loads(resource)
+
+            if 'alloc_id' in path.lower():
+                assert onu_id is not None
+                poolResource = resource[AdtranPONResourceManager.ONU_MAP][str(onu_id)]
+                poolResource[PONResourceManager.POOL] = \
+                    BitArray('0b' + poolResource[PONResourceManager.POOL])
+            else:
+                # resource pool in backend store stored as binary string whereas to
+                # access the pool to generate/release IDs it need to be converted
+                # as BitArray
+                resource[PONResourceManager.POOL] = \
+                    BitArray('0b' + resource[PONResourceManager.POOL])
+
+        return resource
+
+    def _format_resource(self, pon_intf_id, start_idx, end_idx):
+        """
+        Format resource as json.
+
+        :param pon_intf_id: OLT PON interface id
+        :param start_idx: start index for id pool
+        :param end_idx: end index for id pool
+        :return dictionary: resource formatted as dictionary
+        """
+        # Format resource as json to be stored in backend store
+        resource = dict()
+        resource[PONResourceManager.PON_INTF_ID] = pon_intf_id
+        resource[PONResourceManager.START_IDX] = start_idx
+        resource[PONResourceManager.END_IDX] = end_idx
+
+        # resource pool stored in backend store as binary string
+        resource[PONResourceManager.POOL] = BitArray(end_idx-start_idx).bin
+
+        return json.dumps(resource)
+
+    def _format_map_resource(self, pon_intf_id, resource_map):
+        """
+        Format resource as json.
+        # TODO: Refactor the resource BitArray to be just a list of the resources.
+        #       This is used to store available alloc-id's on a per-onu/pon basis
+        #       which in BitArray string form, is a 768 byte string for just 4 possible
+        #       alloc-IDs.  This equates to 1.57 MB of storage when you take into
+        #       account 128 ONUs and 16 PONs pre-provisioneed
+        :param pon_intf_id: OLT PON interface id
+        :param resource_map: (dict) ONU ID -> Scattered list of IDs
+        :return dictionary: resource formatted as dictionary
+        """
+        # Format resource as json to be stored in backend store
+        resource = dict()
+        resource[PONResourceManager.PON_INTF_ID] = pon_intf_id
+
+        onu_dict = dict()
+        for onu_id, resources in resource_map.items():
+            start_idx = min(resources)
+            end_idx = max(resources) + 1
+
+            onu_dict[onu_id] = {
+                PONResourceManager.START_IDX: start_idx,
+                PONResourceManager.END_IDX: end_idx,
+            }
+            # Set non-allowed values as taken
+            resource_map = BitArray(end_idx - start_idx)
+            not_available = {pos for pos in xrange(end_idx-start_idx)
+                             if pos + start_idx not in resources}
+            resource_map.set(True, not_available)
+            onu_dict[onu_id][PONResourceManager.POOL] = resource_map.bin
+
+        resource[AdtranPONResourceManager.ONU_MAP] = onu_dict
+        return json.dumps(resource)
diff --git a/adapters/adtran_olt/resources/adtranolt_platform.py b/adapters/adtran_olt/resources/adtranolt_platform.py
new file mode 100644
index 0000000..3ec7b81
--- /dev/null
+++ b/adapters/adtran_olt/resources/adtranolt_platform.py
@@ -0,0 +1,182 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+from pyvoltha.protos.device_pb2 import Port
+import pyvoltha.protos.device_pb2 as dev_pb2
+
+#######################################################################
+#
+#  This is a copy of the OpenOLT file of a similar name and is used
+#  when running in non-xPON (OpenOLT/SEBA) mode.  We need to closely
+#  watch for changes in the OpenOLT and eventually work together to
+#  have a better way to do things (and more ONUs than 112)
+#
+#  TODO: These duplicate some methods in the OLT Handler.  Clean up
+#        and use a separate file and include it into OLT Handler object
+#        as something it derives from.
+#
+#######################################################################
+"""
+Encoding of identifiers
+=======================
+
+Alloc ID
+
+    Uniquely identifies a T-CONT
+    Ranges from 1024..16383 per ITU Standard
+    For Adtran, 1024..1919
+    Unique per PON interface
+
+     9   8 7        0
+    +-----+----------+
+    | idx |  onu_id  | + (Min Alloc ID)
+    +-----+----------+
+
+    onu id = 8 bit
+    Alloc index = 2 bits (max 4 TCONTs/ONU)
+
+Flow id
+
+    Identifies a flow within a single OLT
+    Flow Id is unique per OLT
+    Multiple GEM ports can map to same flow id
+
+     13    11              4      0
+    +--------+--------------+------+
+    | pon id |    onu id    | Flow |
+    |        |              | idx  |
+    +--------+--------------+------+
+
+    14 bits = 16384 flows (per OLT).
+
+    pon id = 4 bits = 16 PON ports
+    onu id = 7 bits = 128 ONUss per PON port
+    Flow index = 3 bits = 4 bi-directional flows per ONU
+                        = 8 uni-directional flows per ONU
+
+
+Logical (OF) UNI port number
+
+    OpenFlow port number corresponding to PON UNI
+
+     15       11              4      0
+    +--+--------+--------------+------+
+    |0 | pon id |    onu id    |   0  |
+    +--+--------+--------------+------+
+
+    pon id = 4 bits = 16 PON ports
+    onu id = 7 bits = 128 ONUs per PON port
+
+
+PON OLT (OF) port number
+
+    OpenFlow port number corresponding to PON OLT ports
+
+     31    28                                 0
+    +--------+------------------------~~~------+
+    |  0x2   |          pon intf id            |
+    +--------+------------------------~~~------+
+
+"""
+
+MIN_TCONT_ALLOC_ID = 1024                   # 1024..16383
+MAX_TCONT_ALLOC_ID = 16383
+
+MIN_GEM_PORT_ID = 2176                      # 2176..4222
+MAX_GEM_PORT_ID = MIN_GEM_PORT_ID + 2046
+
+MAX_ONUS_PER_PON = 128
+MAX_TCONTS_PER_ONU = 4
+MAX_GEM_PORTS_PER_ONU = 16          # Hardware can handle more
+
+
+class adtran_platform(object):
+    def __init__(self):
+        pass
+
+    def mk_uni_port_num(self, intf_id, onu_id, uni_id=0):
+        return intf_id << 11 | onu_id << 4 | uni_id
+
+    def uni_id_from_uni_port(self, uni_port):
+        return uni_port & 0xF
+
+
+def mk_uni_port_num(intf_id, onu_id, uni_id=0):
+    """
+    Create a unique virtual UNI port number based up on PON and ONU ID
+    :param intf_id:
+    :param onu_id: (int) ONU ID (0..max)
+    :return: (int) UNI Port number
+    """
+    return intf_id << 11 | onu_id << 4 | uni_id
+
+
+def uni_id_from_uni_port(uni_port):
+    return uni_port & 0xF
+
+
+def intf_id_from_uni_port_num(port_num):
+    """
+    Extract the PON device port number from a virtual UNI Port number
+
+    :param port_num: (int) virtual UNI / vENET port number on OLT PON
+    :return: (int) PON Port number (note, this is not the PON ID)
+    """
+    return (port_num >> 11) & 0xF
+
+
+def mk_alloc_id(_, onu_id, idx=0):
+    """
+    Allocate a TCONT Alloc-ID.    This is only called by the OLT
+
+    :param _: (int)         PON ID (not used)
+    :param onu_id: (int)    ONU ID (0..MAX_ONUS_PER_PON-1)
+    :param idx: (int)       TCONT Index (0..7)
+    """
+    assert 0 <= onu_id < MAX_ONUS_PER_PON, 'Invalid ONU ID. Expect 0..{}'.format(MAX_ONUS_PER_PON-1)
+    assert 0 <= idx <= MAX_TCONTS_PER_ONU, 'Invalid TCONT instance. Expect 0..{}'.format(MAX_TCONTS_PER_ONU)
+    alloc_id = MIN_TCONT_ALLOC_ID + (idx << 8) + onu_id
+    return alloc_id
+
+
+def intf_id_from_nni_port_num(port_num):
+    # OpenOLT starts at 128.  We start at 1 (one-to-one mapping)
+    # return port_num - 128
+    return port_num
+
+
+def intf_id_to_intf_type(intf_id):
+    # if (2 << 28 ^ intf_id) < 16:
+    #     return Port.PON_OLT
+    # elif  128 <= intf_id <= 132:
+    #     return Port.ETHERNET_NNI
+    if 5 <= intf_id <= 20:
+        return Port.PON_OLT
+    elif 1 <= intf_id <= 4:
+        return Port.ETHERNET_NNI
+    else:
+        raise Exception('Invalid intf_id value')
+
+
+def is_upstream(in_port, out_port):
+    # FIXME
+    # if out_port in [128, 129, 130, 131, 0xfffd, 0xfffffffd]:
+    # Not sure what fffd and the other is
+    return out_port in [1, 2, 3, 4, 0xfffd, 0xfffffffd]
+
+
+def is_downstream(in_port, out_port):
+    return not is_upstream(in_port, out_port)
diff --git a/adapters/adtran_olt/xpon/__init__.py b/adapters/adtran_olt/xpon/__init__.py
new file mode 100644
index 0000000..d67fcf2
--- /dev/null
+++ b/adapters/adtran_olt/xpon/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present ADTRAN, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/adapters/adtran_olt/xpon/olt_gem_port.py b/adapters/adtran_olt/xpon/olt_gem_port.py
new file mode 100644
index 0000000..9159262
--- /dev/null
+++ b/adapters/adtran_olt/xpon/olt_gem_port.py
@@ -0,0 +1,126 @@
+#
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+import json
+
+from adapters.adtran_common.xpon.gem_port import GemPort
+from twisted.internet.defer import inlineCallbacks, returnValue
+from ..adtran_olt_handler import AdtranOltHandler
+
+log = structlog.get_logger()
+
+
+class OltGemPort(GemPort):
+    """
+    Adtran OLT specific implementation
+    """
+    def __init__(self, gem_id, alloc_id, tech_profile_id, pon_id, onu_id, uni_id,
+                 encryption=False,
+                 multicast=False,
+                 traffic_class=None,
+                 handler=None,
+                 is_mock=False):
+        super(OltGemPort, self).__init__(gem_id, alloc_id, uni_id, tech_profile_id,
+                                         encryption=encryption,
+                                         multicast=multicast,
+                                         traffic_class=traffic_class,
+                                         handler=handler,
+                                         is_mock=is_mock)
+        self._timestamp = None
+        self._pon_id = pon_id
+        self._onu_id = onu_id       # None if this is a multicast GEM Port
+
+    def __str__(self):
+        return "GemPort: {}/{}/{}, alloc-id: {}, gem-id: {}".format(self.pon_id, self.onu_id,
+                                                                    self.uni_id, self.alloc_id,
+                                                                    self.gem_id)
+
+    @staticmethod
+    def create(handler, gem, alloc_id, tech_profile_id, pon_id, onu_id, uni_id, _ofp_port_no):
+        return OltGemPort(gem.gemport_id,
+                          alloc_id,
+                          tech_profile_id,
+                          pon_id, onu_id, uni_id,
+                          encryption=gem.aes_encryption.lower() == 'true',
+                          handler=handler,
+                          multicast=False)
+
+    @property
+    def pon_id(self):
+        return self._pon_id
+
+    @property
+    def onu_id(self):
+        return self._onu_id
+
+    @property
+    def timestamp(self):
+        return self._timestamp
+
+    @timestamp.setter
+    def timestamp(self, value):
+        self._timestamp = value
+
+    @property
+    def encryption(self):
+        return self._encryption
+
+    @encryption.setter
+    def encryption(self, value):
+        assert isinstance(value, bool), 'encryption is a boolean'
+
+        if self._encryption != value:
+            self._encryption = value
+            self.set_config(self._handler.rest_client, 'encryption', value)
+
+    @inlineCallbacks
+    def add_to_hardware(self, session, operation='POST'):
+        if self._is_mock:
+            returnValue('mock')
+
+        uri = AdtranOltHandler.GPON_GEM_CONFIG_LIST_URI.format(self.pon_id, self.onu_id)
+        data = json.dumps(self.to_dict())
+        name = 'gem-port-create-{}-{}: {}/{}'.format(self.pon_id, self.onu_id,
+                                                     self.gem_id,
+                                                     self.alloc_id)
+        try:
+            results = yield session.request(operation, uri, data=data, name=name)
+            returnValue(results)
+
+        except Exception as e:
+            if operation == 'POST':
+                returnValue(self.add_to_hardware(session, operation='PATCH'))
+            else:
+                log.exception('add-2-hw', gem=self, e=e)
+                raise
+
+    def remove_from_hardware(self, session):
+        if self._is_mock:
+            returnValue('mock')
+
+        uri = AdtranOltHandler.GPON_GEM_CONFIG_URI.format(self.pon_id, self.onu_id, self.gem_id)
+        name = 'gem-port-delete-{}-{}: {}'.format(self.pon_id, self.onu_id, self.gem_id)
+        return session.request('DELETE', uri, name=name)
+
+    def set_config(self, session, leaf, value):
+        from ..adtran_olt_handler import AdtranOltHandler
+
+        data = json.dumps({leaf: value})
+        uri = AdtranOltHandler.GPON_GEM_CONFIG_URI.format(self.pon_id,
+                                                          self.onu_id,
+                                                          self.gem_id)
+        name = 'onu-set-config-{}-{}-{}'.format(self._pon_id, leaf, str(value))
+        return session.request('PATCH', uri, data=data, name=name)
diff --git a/adapters/adtran_olt/xpon/olt_tcont.py b/adapters/adtran_olt/xpon/olt_tcont.py
new file mode 100644
index 0000000..db31543
--- /dev/null
+++ b/adapters/adtran_olt/xpon/olt_tcont.py
@@ -0,0 +1,90 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+import json
+from twisted.internet.defer import inlineCallbacks, returnValue
+from adapters.adtran_common.xpon.tcont import TCont
+# from python.adapters.openolt.protos import openolt_pb2
+from olt_traffic_descriptor import OltTrafficDescriptor
+from ..adtran_olt_handler import AdtranOltHandler
+
+log = structlog.get_logger()
+
+
+class OltTCont(TCont):
+    """
+    Adtran OLT specific implementation
+    """
+    def __init__(self, alloc_id, tech_profile_id, traffic_descriptor, pon_id, onu_id, uni_id, is_mock=False):
+        super(OltTCont, self).__init__(alloc_id, tech_profile_id, traffic_descriptor, uni_id, is_mock=is_mock)
+        self.pon_id = pon_id
+        self.onu_id = onu_id
+
+    def __str__(self):
+        return "TCont: {}/{}/{}, alloc-id: {}".format(self.pon_id, self.onu_id,
+                                                      self.uni_id, self.alloc_id)
+
+    @staticmethod
+    def create(tcont, pon_id, onu_id, tech_profile_id, uni_id, ofp_port_no):
+        # Only valid information in the upstream tcont of a tech profile
+        if tcont.direction != openolt_pb2.UPSTREAM:
+            return None
+
+        td = OltTrafficDescriptor.create(tcont, pon_id, onu_id, uni_id, ofp_port_no)
+        return OltTCont(tcont.alloc_id, tech_profile_id, td, pon_id, onu_id, uni_id)
+
+    @inlineCallbacks
+    def add_to_hardware(self, session):
+        if self._is_mock:
+            returnValue('mock')
+
+        uri = AdtranOltHandler.GPON_TCONT_CONFIG_LIST_URI.format(self.pon_id, self.onu_id)
+        data = json.dumps({'alloc-id': self.alloc_id})
+        name = 'tcont-create-{}-{}: {}'.format(self.pon_id, self.onu_id, self.alloc_id)
+
+        # For TCONT, only leaf is the key. So only post needed
+        try:
+            results = yield session.request('POST', uri, data=data, name=name,
+                                            suppress_error=False)
+        except Exception as _e:
+            results = None
+
+        if self.traffic_descriptor is not None:
+            try:
+                results = yield self.traffic_descriptor.add_to_hardware(session)
+
+            except Exception as e:
+                log.exception('traffic-descriptor', tcont=self,
+                              td=self.traffic_descriptor, e=e)
+                raise
+
+        returnValue(results)
+
+    def remove_from_hardware(self, session):
+        if self._is_mock:
+            returnValue('mock')
+
+        uri = AdtranOltHandler.GPON_TCONT_CONFIG_URI.format(self.pon_id, self.onu_id, self.alloc_id)
+        name = 'tcont-delete-{}-{}: {}'.format(self.pon_id, self.onu_id, self.alloc_id)
+        return session.request('DELETE', uri, name=name)
+
+
+
+
+
+
+
+
+
diff --git a/adapters/adtran_olt/xpon/olt_traffic_descriptor.py b/adapters/adtran_olt/xpon/olt_traffic_descriptor.py
new file mode 100644
index 0000000..c6d90cf
--- /dev/null
+++ b/adapters/adtran_olt/xpon/olt_traffic_descriptor.py
@@ -0,0 +1,98 @@
+# Copyright 2017-present Adtran, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import structlog
+import json
+from adapters.adtran_common.xpon.traffic_descriptor import TrafficDescriptor
+from twisted.internet.defer import inlineCallbacks, returnValue
+from ..adtran_olt_handler import AdtranOltHandler
+
+log = structlog.get_logger()
+
+
+class OltTrafficDescriptor(TrafficDescriptor):
+    """
+    Adtran ONU specific implementation
+    """
+    def __init__(self, pon_id, onu_id, alloc_id, fixed, assured, maximum,
+                 additional=TrafficDescriptor.AdditionalBwEligibility.DEFAULT,
+                 best_effort=None,
+                 is_mock=False):
+        super(OltTrafficDescriptor, self).__init__(fixed, assured, maximum,
+                                                   additional=additional,
+                                                   best_effort=best_effort)
+        self.pon_id = pon_id
+        self.onu_id = onu_id
+        self.alloc_id = alloc_id
+        self._is_mock = is_mock
+
+    @staticmethod
+    def create(tcont, pon_id, onu_id, _uni_id, _ofp_port_no):
+        alloc_id = tcont.alloc_id
+        shaping_info = tcont.traffic_shaping_info
+        fixed = shaping_info.cir
+        assured = 0
+        maximum = shaping_info.pir
+
+        best_effort = None
+        # if shaping_info.add_bw_ind == openolt_pb2.InferredAdditionBWIndication_Assured:
+        #     pass
+        #               TODO: Support additional BW decode
+        # elif shaping_info.add_bw_ind == openolt_pb2.InferredAdditionBWIndication_BestEffort:
+        #     pass
+        # additional = TrafficDescriptor.AdditionalBwEligibility.from_value(
+        #     traffic_disc['additional-bw-eligibility-indicator'])
+        #
+        # if additional == TrafficDescriptor.AdditionalBwEligibility.BEST_EFFORT_SHARING:
+        #     best_effort = BestEffort(traffic_disc['maximum-bandwidth'],
+        #                              traffic_disc['priority'],
+        #                              traffic_disc['weight'])
+        # else:
+        #     best_effort = None
+
+        return OltTrafficDescriptor(pon_id, onu_id, alloc_id,
+                                    fixed, assured, maximum, best_effort=best_effort)
+
+    @inlineCallbacks
+    def add_to_hardware(self, session):
+        # TODO: Traffic descriptors are no longer shared, save pon and onu ID to base class
+        if self._is_mock:
+            returnValue('mock')
+
+        uri = AdtranOltHandler.GPON_TCONT_CONFIG_URI.format(self.pon_id,
+                                                            self.onu_id,
+                                                            self.alloc_id)
+        data = json.dumps({'traffic-descriptor': self.to_dict()})
+        name = 'tcont-td-{}-{}: {}'.format(self.pon_id, self.onu_id, self.alloc_id)
+        try:
+            results = yield session.request('PATCH', uri, data=data, name=name)
+
+        except Exception as e:
+            log.exception('traffic-descriptor', td=self, e=e)
+            raise
+
+        # TODO: Add support for best-effort sharing
+        # if self.additional_bandwidth_eligibility == \
+        #         TrafficDescriptor.AdditionalBwEligibility.BEST_EFFORT_SHARING:
+        #     if self.best_effort is None:
+        #         raise ValueError('TCONT is best-effort but does not define best effort sharing')
+        #
+        #     try:
+        #         results = yield self.best_effort.add_to_hardware(session)
+        #
+        #     except Exception as e:
+        #         log.exception('best-effort', best_effort=self.best_effort, e=e)
+        #         raise
+
+        returnValue(results)