diff --git a/vendor/k8s.io/klog/OWNERS b/vendor/k8s.io/klog/OWNERS
index d0168e8..380e514 100644
--- a/vendor/k8s.io/klog/OWNERS
+++ b/vendor/k8s.io/klog/OWNERS
@@ -1,5 +1,13 @@
 # See the OWNERS docs at https://go.k8s.io/owners
-
+reviewers:
+  - jayunit100
+  - hoegaarden
+  - andyxning
+  - neolit123
+  - pohly
+  - yagonobre
+  - vincepri
+  - detiber
 approvers:
   - dims
   - thockin
diff --git a/vendor/k8s.io/klog/README.md b/vendor/k8s.io/klog/README.md
index 6cb6d16..bee306f 100644
--- a/vendor/k8s.io/klog/README.md
+++ b/vendor/k8s.io/klog/README.md
@@ -1,7 +1,27 @@
 klog
 ====
 
-klog is a permanant fork of https://github.com/golang/glog. original README from glog is below
+klog is a permanent fork of https://github.com/golang/glog.
+
+## Why was klog created?
+
+The decision to create klog was one that wasn't made lightly, but it was necessary due to some
+drawbacks that are present in [glog](https://github.com/golang/glog). Ultimately, the fork was created due to glog not being under active development; this can be seen in the glog README:
+
+> The code in this repo [...] is not itself under development
+
+This makes us unable to solve many use cases without a fork. The factors that contributed to needing feature development are listed below:
+
+ * `glog` [presents a lot "gotchas"](https://github.com/kubernetes/kubernetes/issues/61006) and introduces challenges in containerized environments, all of which aren't well documented.
+ * `glog` doesn't provide an easy way to test logs, which detracts from the stability of software using it
+ * A long term goal is to implement a logging interface that allows us to add context, change output format, etc.
+ 
+Historical context is available here:
+
+ * https://github.com/kubernetes/kubernetes/issues/61006
+ * https://github.com/kubernetes/kubernetes/issues/70264
+ * https://groups.google.com/forum/#!msg/kubernetes-sig-architecture/wCWiWf3Juzs/hXRVBH90CgAJ
+ * https://groups.google.com/forum/#!msg/kubernetes-dev/7vnijOMhLS0/1oRiNtigBgAJ
 
 ----
 
diff --git a/vendor/k8s.io/klog/SECURITY_CONTACTS b/vendor/k8s.io/klog/SECURITY_CONTACTS
index 520ddb5..6128a58 100644
--- a/vendor/k8s.io/klog/SECURITY_CONTACTS
+++ b/vendor/k8s.io/klog/SECURITY_CONTACTS
@@ -1,10 +1,10 @@
 # Defined below are the security contacts for this repo.
 #
-# They are the contact point for the Product Security Team to reach out
+# They are the contact point for the Product Security Committee to reach out
 # to for triaging and handling of incoming issues.
 #
 # The below names agree to abide by the
-# [Embargo Policy](https://github.com/kubernetes/sig-release/blob/master/security-release-process-documentation/security-release-process.md#embargo-policy)
+# [Embargo Policy](https://git.k8s.io/security/private-distributors-list.md#embargo-policy)
 # and will be removed and replaced if they violate that agreement.
 #
 # DO NOT REPORT SECURITY VULNERABILITIES DIRECTLY TO THESE NAMES, FOLLOW THE
diff --git a/vendor/k8s.io/klog/klog.go b/vendor/k8s.io/klog/klog.go
index 733d14b..a3dddea 100644
--- a/vendor/k8s.io/klog/klog.go
+++ b/vendor/k8s.io/klog/klog.go
@@ -43,7 +43,7 @@
 //		Logs are written to standard error instead of to files.
 //	-alsologtostderr=false
 //		Logs are written to standard error as well as to files.
-//	-stderrthreshold=INFO
+//	-stderrthreshold=ERROR
 //		Log events at or above this severity are logged to standard
 //		error as well as to files.
 //	-log_dir=""
@@ -78,6 +78,7 @@
 	"fmt"
 	"io"
 	stdLog "log"
+	"math"
 	"os"
 	"path/filepath"
 	"runtime"
@@ -396,24 +397,43 @@
 }
 
 func init() {
-	// Default stderrThreshold is INFO.
-	logging.stderrThreshold = infoLog
+	// Default stderrThreshold is ERROR.
+	logging.stderrThreshold = errorLog
 
 	logging.setVState(0, nil, false)
 	go logging.flushDaemon()
 }
 
-// InitFlags is for explicitly initializing the flags
+var initDefaultsOnce sync.Once
+
+// InitFlags is for explicitly initializing the flags.
 func InitFlags(flagset *flag.FlagSet) {
+
+	// Initialize defaults.
+	initDefaultsOnce.Do(func() {
+		logging.logDir = ""
+		logging.logFile = ""
+		logging.logFileMaxSizeMB = 1800
+		logging.toStderr = true
+		logging.alsoToStderr = false
+		logging.skipHeaders = false
+		logging.skipLogHeaders = false
+	})
+
 	if flagset == nil {
 		flagset = flag.CommandLine
 	}
-	flagset.StringVar(&logging.logDir, "log_dir", "", "If non-empty, write log files in this directory")
-	flagset.StringVar(&logging.logFile, "log_file", "", "If non-empty, use this log file")
-	flagset.BoolVar(&logging.toStderr, "logtostderr", true, "log to standard error instead of files")
-	flagset.BoolVar(&logging.alsoToStderr, "alsologtostderr", false, "log to standard error as well as files")
+
+	flagset.StringVar(&logging.logDir, "log_dir", logging.logDir, "If non-empty, write log files in this directory")
+	flagset.StringVar(&logging.logFile, "log_file", logging.logFile, "If non-empty, use this log file")
+	flagset.Uint64Var(&logging.logFileMaxSizeMB, "log_file_max_size", logging.logFileMaxSizeMB,
+		"Defines the maximum size a log file can grow to. Unit is megabytes. "+
+			"If the value is 0, the maximum file size is unlimited.")
+	flagset.BoolVar(&logging.toStderr, "logtostderr", logging.toStderr, "log to standard error instead of files")
+	flagset.BoolVar(&logging.alsoToStderr, "alsologtostderr", logging.alsoToStderr, "log to standard error as well as files")
 	flagset.Var(&logging.verbosity, "v", "number for the log level verbosity")
-	flagset.BoolVar(&logging.skipHeaders, "skip_headers", false, "If true, avoid header prefixes in the log messages")
+	flagset.BoolVar(&logging.skipHeaders, "skip_headers", logging.skipHeaders, "If true, avoid header prefixes in the log messages")
+	flagset.BoolVar(&logging.skipLogHeaders, "skip_log_headers", logging.skipLogHeaders, "If true, avoid headers when opening log files")
 	flagset.Var(&logging.stderrThreshold, "stderrthreshold", "logs at or above this threshold go to stderr")
 	flagset.Var(&logging.vmodule, "vmodule", "comma-separated list of pattern=N settings for file-filtered logging")
 	flagset.Var(&logging.traceLocation, "log_backtrace_at", "when logging hits line file:N, emit a stack trace")
@@ -471,8 +491,15 @@
 	// with the log-dir option.
 	logFile string
 
+	// When logFile is specified, this limiter makes sure the logFile won't exceeds a certain size. When exceeds, the
+	// logFile will be cleaned up. If this value is 0, no size limitation will be applied to logFile.
+	logFileMaxSizeMB uint64
+
 	// If true, do not add the prefix headers, useful when used with SetOutput
 	skipHeaders bool
+
+	// If true, do not add the headers to log files
+	skipLogHeaders bool
 }
 
 // buffer holds a byte Buffer for reuse. The zero value is ready for use.
@@ -739,9 +766,7 @@
 	}
 	data := buf.Bytes()
 	if l.toStderr {
-		if s >= l.stderrThreshold.get() {
-			os.Stderr.Write(data)
-		}
+		os.Stderr.Write(data)
 	} else {
 		if alsoToStderr || l.alsoToStderr || s >= l.stderrThreshold.get() {
 			os.Stderr.Write(data)
@@ -863,18 +888,33 @@
 type syncBuffer struct {
 	logger *loggingT
 	*bufio.Writer
-	file   *os.File
-	sev    severity
-	nbytes uint64 // The number of bytes written to this file
+	file     *os.File
+	sev      severity
+	nbytes   uint64 // The number of bytes written to this file
+	maxbytes uint64 // The max number of bytes this syncBuffer.file can hold before cleaning up.
 }
 
 func (sb *syncBuffer) Sync() error {
 	return sb.file.Sync()
 }
 
+// CalculateMaxSize returns the real max size in bytes after considering the default max size and the flag options.
+func CalculateMaxSize() uint64 {
+	if logging.logFile != "" {
+		if logging.logFileMaxSizeMB == 0 {
+			// If logFileMaxSizeMB is zero, we don't have limitations on the log size.
+			return math.MaxUint64
+		}
+		// Flag logFileMaxSizeMB is in MB for user convenience.
+		return logging.logFileMaxSizeMB * 1024 * 1024
+	}
+	// If "log_file" flag is not specified, the target file (sb.file) will be cleaned up when reaches a fixed size.
+	return MaxSize
+}
+
 func (sb *syncBuffer) Write(p []byte) (n int, err error) {
-	if sb.nbytes+uint64(len(p)) >= MaxSize {
-		if err := sb.rotateFile(time.Now()); err != nil {
+	if sb.nbytes+uint64(len(p)) >= sb.maxbytes {
+		if err := sb.rotateFile(time.Now(), false); err != nil {
 			sb.logger.exit(err)
 		}
 	}
@@ -887,13 +927,15 @@
 }
 
 // rotateFile closes the syncBuffer's file and starts a new one.
-func (sb *syncBuffer) rotateFile(now time.Time) error {
+// The startup argument indicates whether this is the initial startup of klog.
+// If startup is true, existing files are opened for appending instead of truncated.
+func (sb *syncBuffer) rotateFile(now time.Time, startup bool) error {
 	if sb.file != nil {
 		sb.Flush()
 		sb.file.Close()
 	}
 	var err error
-	sb.file, _, err = create(severityName[sb.sev], now)
+	sb.file, _, err = create(severityName[sb.sev], now, startup)
 	sb.nbytes = 0
 	if err != nil {
 		return err
@@ -901,6 +943,10 @@
 
 	sb.Writer = bufio.NewWriterSize(sb.file, bufferSize)
 
+	if sb.logger.skipLogHeaders {
+		return nil
+	}
+
 	// Write header.
 	var buf bytes.Buffer
 	fmt.Fprintf(&buf, "Log file created at: %s\n", now.Format("2006/01/02 15:04:05"))
@@ -925,10 +971,11 @@
 	// has already been created, we can stop.
 	for s := sev; s >= infoLog && l.file[s] == nil; s-- {
 		sb := &syncBuffer{
-			logger: l,
-			sev:    s,
+			logger:   l,
+			sev:      s,
+			maxbytes: CalculateMaxSize(),
 		}
-		if err := sb.rotateFile(now); err != nil {
+		if err := sb.rotateFile(now, true); err != nil {
 			return err
 		}
 		l.file[s] = sb
diff --git a/vendor/k8s.io/klog/klog_file.go b/vendor/k8s.io/klog/klog_file.go
index b76a4e1..e4010ad 100644
--- a/vendor/k8s.io/klog/klog_file.go
+++ b/vendor/k8s.io/klog/klog_file.go
@@ -97,9 +97,11 @@
 // contains tag ("INFO", "FATAL", etc.) and t.  If the file is created
 // successfully, create also attempts to update the symlink for that tag, ignoring
 // errors.
-func create(tag string, t time.Time) (f *os.File, filename string, err error) {
+// The startup argument indicates whether this is the initial startup of klog.
+// If startup is true, existing files are opened for appending instead of truncated.
+func create(tag string, t time.Time, startup bool) (f *os.File, filename string, err error) {
 	if logging.logFile != "" {
-		f, err := os.Create(logging.logFile)
+		f, err := openOrCreate(logging.logFile, startup)
 		if err == nil {
 			return f, logging.logFile, nil
 		}
@@ -113,7 +115,7 @@
 	var lastErr error
 	for _, dir := range logDirs {
 		fname := filepath.Join(dir, name)
-		f, err := os.Create(fname)
+		f, err := openOrCreate(fname, startup)
 		if err == nil {
 			symlink := filepath.Join(dir, link)
 			os.Remove(symlink)        // ignore err
@@ -124,3 +126,14 @@
 	}
 	return nil, "", fmt.Errorf("log: cannot create log: %v", lastErr)
 }
+
+// The startup argument indicates whether this is the initial startup of klog.
+// If startup is true, existing files are opened for appending instead of truncated.
+func openOrCreate(name string, startup bool) (*os.File, error) {
+	if startup {
+		f, err := os.OpenFile(name, os.O_RDWR|os.O_CREATE|os.O_APPEND, 0666)
+		return f, err
+	}
+	f, err := os.Create(name)
+	return f, err
+}