BAL and Maple Release 2.2
Signed-off-by: Shad Ansari <developer@Carbon.local>
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.all b/bal_release/3rdparty/bcm-sdk/make/Make.local.all
new file mode 100755
index 0000000..9fa470f
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.all
@@ -0,0 +1,571 @@
+# $Id: Make.local.template,v 1.181 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License"). Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein. IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.
+#
+# Except as expressly set forth in the Authorized License,
+#
+# 1. This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#
+# 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+#
+# 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Usage for Make.local.template and Make.local:
+#
+# Make.local.template is checked into the tree, but Make.local is never
+# checked in. Copy Make.local.template to Make.local, then change
+# Make.local to select the desired compilation options (mostly debugging
+# features).
+#
+# Note on CFGFLAGS usage:
+#
+# Because CFGFLAGS may be used with other source preprocessing tools,
+# please limit the values added to CFGFLAGS to -D defines.
+#
+#
+# Table of Contents:
+#
+# Compiler Related Options
+# Boot and Debug Related Options
+# Operational and Policy Options
+# System Management and Multiple CPU Options
+# Selective Device Support (Switches and PHYs)
+# Miscellaneous Options
+#
+
+################################################################
+#
+# Compiler Related Options
+#
+################################################################
+
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#DEBUG_IFDEFS=FALSE
+
+# SAL resource usage tracking #ifdef control
+# DEBUG_IFDEFS should also be TRUE for this switch to take effect.
+#BCM_RESOURCE_USAGE_PROFILE_IFDEFS=TRUE
+
+# Uncomment to build without debug symbols
+#DEBUG_SYMBOLS=FALSE
+
+# Uncomment to add private CFLAGS
+#DEBUG_CFLAGS=
+
+# Uncomment to turn off the optimizer when debugging (recommended)
+#DEBUG_OPTIMIZE=FALSE
+
+# Compiling out assert() saves about 1.1% on executable size,
+# however do so is VERY MUCH discouraged.
+#DEBUG_ASSERTS=FALSE
+
+# Controlling GCC -pedantic flag
+#DEBUG_PEDANTIC=TRUE
+
+# compiler.h overrides, these disable various compiler
+# related features even if the compiler normally supports them
+
+# Disable use of long long for uint64
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_LONGLONG
+
+# Disable use of doubles
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_DOUBLE
+
+# Disable inlining of functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_INLINE
+
+# Disable use of const
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_CONST
+
+# Disable use of static functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_STATIC
+
+# Disable RPC flexible (long) bitmaps.
+# Warning: Disabling this changes the RPC version to 2 and
+# makes systems running this code incompatible with systems
+# running previous versions of BCM RPC code.
+#CFGFLAGS += -DBCM_RPC_PBMP_64
+
+#
+# Define if longs are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+#CFGFLAGS += -DLONGS_ARE_64BITS
+
+#
+# Define if pointers are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+# NOTE: This support works ONLY under conditions where the
+# upper 32 bits for ALL pointers are ZERO.
+#CFGFLAGS += -DPTRS_ARE_64BITS
+
+
+################################################################
+#
+# Boot and Debug Related Options
+#
+################################################################
+
+# Define this to add debug code for RX pool buffer tracking
+#CFGFLAGS += -DBCM_RXP_DEBUG
+
+# Allow debugging of PCI reads/writes (debug +pci)
+#CFGFLAGS += -DSOC_PCI_DEBUG
+
+# Make default debugging settings be 0 (very very quiet)
+#CFGFLAGS += -DNO_DEBUG_OUTPUT_DEFAULT
+
+# Don't use vxMemProbe
+#CFGFLAGS += -DVX_NO_MEM_PROBE
+
+# Allow debugging of Memory Allocation/Deallocation logging
+#CFGFLAGS += -DMEMLOG_SUPPORT
+
+################################################################
+################################################################
+#
+# Operational and Policy Options
+#
+################################################################
+
+# VLAN policy control:
+# NO_DEFAULT_ETHER do not init ether ports into vlan 1
+# NO_DEFAULT_CPU do not init cpu ports into vlan 1
+# NO_DEFAULT_SPI_SUBPORT do not init spi subports into vlan 1
+# NO_AUTO_STACK do not init stack/HG ports into created vlans
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_ETHER
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_CPU
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_SPI_SUBPORT
+#CFGFLAGS += -DBCM_VLAN_NO_AUTO_STACK
+
+# VLAN multicast flood Policy Control:
+# BCM_VLAN_MCAST_FLOOD_ALL Flood all multicast packets to the VLAN
+# BCM_VLAN_MCAST_FLOOD_UNKNOWN Flood unknown multicast packets to the vlan
+# BCM_VLAN_MCAST_FLOOD_NONE Forward multicast packets with known
+# destination addresses to the appropriate ports.
+# All packets destined to an unknown multicast
+# address are dropped.
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_ALL
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_UNKNOWN
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_NONE
+
+#Port Enable/Disable Policy control:
+# PORT_DEFAULT_DISABLE disable ports during switch initialization
+#CFGFLAGS += -DBCM_PORT_DEFAULT_DISABLE
+
+# sal thread priority override (this value used for all threads if defined)
+#CFGFLAGS += -DSAL_THREAD_PRIORITY=255
+
+# disable printing of thread name in messages
+#CFGFLAGS += -DSAL_THREAD_NAME_PRINT_DISABLE
+
+# disable runtime reading of flash config.bcm file (even if !NO_FILEIO)
+#CFGFLAGS += -DSAL_CONFIG_FILE_DISABLE
+
+# disable all Application SAL dependencies
+#NO_SAL_APPL=1
+
+
+# Prevent scheduling in SPL locks when interrupt code is run as a thread.
+# This option should not be necessary if all locks are implemented correctly,
+# however, some locks may still rely on the assumption that scheduling does
+# not occur when interrupts are disabled. If you experience any locking
+# problems in e.g. Linux User Mode, try enabling this option.
+# Please note that turning on this option will reduce performance by an
+# estimated 5 to 10 %.
+#CFGFLAGS += -DSAL_SPL_NO_PREEMPT
+
+# disable mapping of higig cosq when mapping priority to cosq
+# (use identity mapping instead : map prio0->cos0, prio1->cos1, ... , prio7->cos7)
+#CFGFLAGS += -DBCM_COSQ_HIGIG_MAP_DISABLE
+
+# Enable ukernel debugging module
+#CFGFLAGS += -DSOC_UKERNEL_DEBUG
+
+
+################################################################
+#
+# System Management and Multiple CPU Options
+#
+################################################################
+
+# Turn on BCMX inclusion
+# INCLUDE_BCMX for any support
+INCLUDE_BCMX=1
+
+# Telekinesis suite applications for CPU to CPU communication and discovery
+# CPUDB: Simple CPU data base manager
+# CPUTRANS: CPU to CPU communication mechanisms
+# DISCOVER: Simple discovery; will also include CPUTRANS
+# STKTASK: Stack manager application
+#
+#CFGFLAGS += -DINCLUDE_LIB_CPUDB
+#CFGFLAGS += -DINCLUDE_LIB_CPUTRANS
+#CFGFLAGS += -DINCLUDE_LIB_DISCOVER
+#CFGFLAGS += -DINCLUDE_LIB_STKTASK
+
+# Option for discovery to use the application-data field in routing
+# packets for Board-ID and CPU base flag information.
+#CFGFLAGS += -DDISCOVER_APP_DATA_BOARDID
+
+# Optionally override list of included dispatch modules
+# Note: including RPC automatically includes the Telekinesis suite libs
+# ESW is the enterprise platforms.
+# ROBO includes the managed devices.
+# SBX includes API support for bcm988020QSK24X2
+#DISPATCH_LIST = RPC ESW ASYNC SBX
+
+# Define to have end-to-end flow control enabled on boards that
+# support it
+#CFGFLAGS += -DBCM_BOARD_AUTO_E2E
+
+# Define the following to support per-CPU transmit pointers.
+# This allows the TX setup and send functions to be defined on a
+# per-CPU basis, allowing mixed in-band and out-of-band communication.
+#CFGFLAGS += -DBCM_C2C_TRANSPORT_SWITCHING
+
+# Options for feature list (INCLUDE_XXX)
+# If FEATURE_LIST is defined, it is a list of features to include.
+# See Make.config for the default feature list.
+#
+# Avaliable features:
+#
+# BCMX
+# BCMX_DIAG
+# CHASSIS
+# CUSTOMER
+# DRIVERS
+# EDITLINE
+# I2C
+# L3
+# MEM_SCAN
+# ATPTRANS_SOCKET
+# TELNET
+# TEST
+# ACL
+# RCPU
+# KNET - Linux user mode kernel network support
+# BCM_SAL_PROFILE - make available an API to track SAL usage.
+# CINT - Include the C Interpreter in the diagnostic shell.
+# Please note this cannot be used in Linux kernel mode.
+# C_UNIT - Include the C unit testing framework. If CINT is also included
+# then hooks will be provided for use from it.
+# PHY_SYM_DBG - PHY GUI MDIO read/write support. Socket interface
+# to PHY GUI for Symbolic debugging.
+# APIMODE - call SDK API functions from shell, requires CINT
+# DUNE_UI - dune legacy user interface. For debug only. Tested
+# on linux-user-gto-2.6 only.
+# KBP - include nlm2(11K)/nlm3(12K) KBP support
+# BHH - Include Support for BHH Application (MPLS-TP OAM based on Y.1731)
+# using BTE on select devices.
+# AVS - Include AVS support
+#FEATURE_LIST=ATPTRANS_SOCKET BCMX_DIAG L3 I2C BCMX MEM_SCAN EDITLINE \
+# CUSTOMER TELNET DRIVERS CHASSIS TEST ACL RCPU BCM_SAL_PROFILE CINT \
+# PTP CES FCMAP BOARD KNET REGEX MACSEC APIMODE BFD KBP AVS
+
+#FEATURE_LIST= ATPTRANS_SOCKET PTP CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE BCM_SAL_PROFILE CUSTOMER TEST CHASSIS MSTP RCPU
+
+# ARAD + KT2
+FEATURE_LIST= ATPTRANS_SOCKET PTP CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE BCM_SAL_PROFILE CUSTOMER TEST CHASSIS MSTP RCPU INTR BSAFE TELNET DRIVERS DUNE_UI
+#
+###############################################################
+# KBP supported devices
+#
+#Enable this for 11K device support
+#KBP_DEVICE = KBP_11K
+#
+#Enable this for 12K device support
+#KBP_DEVICE = KBP_ALG
+#
+###############################################################
+
+################################################################
+#
+# Selective Device Support (Switches and PHYs)
+#
+################################################################
+
+# Multiple Chip Support
+#
+# By default, the driver supports all Strata switch and fabric chips
+# included in this software release. It checks device IDs at runtime
+# to run the correct driver modules.
+#
+# To save space, the driver can be compiled to support just a subset of
+# the chips. To do this, uncomment the line for BCM_PTL_SPT (partial
+# support) and uncomment one line for each chip to support.
+#
+# Note that there are a lot more chips than drivers.
+# For example, the BCM5615 driver is also used for BCM5625 and BCM5645.
+#
+
+BCM_PTL_SPT = 1
+
+#BCM_5675_A0 = 1
+#BCM_56102_A0 = 1
+#BCM_56112_A0 = 1
+#BCM_56304_B0 = 1
+#BCM_56314_A0 = 1
+#BCM_56504_A0 = 1
+#BCM_56504_B0 = 1
+#BCM_56514_A0 = 1
+#BCM_56624_A0 = 1
+#BCM_56624_B0 = 1
+#BCM_56680_A0 = 1
+#BCM_56680_B0 = 1
+#BCM_56580_A0 = 1
+#BCM_56700_A0 = 1
+#BCM_56800_A0 = 1
+#BCM_56218_A0 = 1
+#BCM_56224_A0 = 1
+#BCM_56224_B0 = 1
+#BCM_56725_A0 = 1
+#BCM_56820_A0 = 1
+#BCM_53314_A0 = 1
+#BCM_53324_A0 = 1
+#BCM_56634_A0 = 1
+#BCM_56634_B0 = 1
+#BCM_56524_A0 = 1
+#BCM_56524_B0 = 1
+#BCM_56685_A0 = 1
+#BCM_56685_B0 = 1
+#BCM_56334_A0 = 1
+#BCM_56334_B0 = 1
+#BCM_56840_A0 = 1
+#BCM_56840_B0 = 1
+#BCM_56850_A0 = 1
+#BCM_56142_A0 = 1
+#BCM_56150_A0 = 1
+#BCM_56836_A0 = 1
+#BCM_56640_A0 = 1
+BCM_56440_A0 = 1
+BCM_56440_B0 = 1
+BCM_56450_A0 = 1
+BCM_56450_B0 = 1
+BCM_56450_B1 = 1
+#BCM_56960_A0 = 1
+#BCM_56860_A0 = 1
+
+#BCM_5338_A0 = 1
+#BCM_5380_A0 = 1
+#BCM_5338_B0 = 1
+#BCM_5325_A1 = 1
+
+#BCM_5324_A0 = 1
+#BCM_5396_A0 = 1
+#BCM_5389_A0 = 1
+#BCM_5398_A0 = 1
+#BCM_5324_A1 = 1
+#BCM_53115_A0 = 1
+#BCM_53118_A0 = 1
+#BCM_53280_A0 = 1
+#BCM_53280_B0 = 1
+#BCM_53101_A0 = 1
+#BCM_53125_A0 = 1
+#BCM_53128_A0 = 1
+#BCM_53600_A0 = 1
+#BCM_89500_A0 = 1
+
+#BCM_88030_A0 = 1
+#BCM_QE2000_A0 = 1
+#BCM_BME3200_B0 = 1
+#BCM_BM9600_A0 = 1
+#BCM_88230_A0 = 1
+#BCM_88230_B0 = 1
+#BCM_88230_C0 = 1
+
+# ARAD
+BCM_88640_A0=1
+BCM_88650_A0=1
+BCM_88650_B0=1
+BCM_88660_A0=1
+
+#BCM_TK371X_A0 = 1
+
+# Options for multiple PHY support
+# If BCM_PHY_LIST is defined, it is a list of PHYs to include.
+# The default is to include all of them.
+# If none of them should be included specify BCM_PHY_LIST=EMPTY
+#BCM_PHY_LIST=522X 54XX 5464 5421S 5482 54616 54680 54680E 52681E 54880E 54682 54684 54640 54640E 54880 SERDES SIMUL 8703 8705 8706 8072 8040 8481 8750 8729 84740 84756 84328 EMPTY
+
+# Options for BCM5338 5380
+#CFGFLAGS += -DROBO_OLD
+#ROBO_OLD = 1
+
+# Support for phy simulation
+#CFGFLAGS += -DINCLUDE_PHY_SIMUL
+#CFGFLAGS += -DSIM_ALL_PHYS # All phys use simulation driver
+#CFGFLAGS += -DSIM_CMIC_LINK_STAT # Get link status from CMIC register
+
+# Support for BOARD library
+# if BOARD_LIST is defined, it is a list of Board drivers to include.
+# The default is to include all board drivers appropriate for the devices
+# included in the build. If none of them should be included specify
+# BOARD_LIST=EMPTY.
+#BOARD_LIST=GENERIC
+
+# Support for event logging
+#CFGFLAGS += -DINCLUDE_SHARED_EVLOG
+
+# Support for BCM API port translation
+#CFGFLAGS += -DINCLUDE_BCM_API_XLATE_PORT
+
+# Support for callback error checks and abort in traverse api's
+#CFGFLAGS += -DBCM_CB_ABORT_ON_ERR
+################################################################
+#
+# Misc Options
+#
+################################################################
+#CFGFLAGS += -DSOC_MEM_L3_DEFIP_WAR
+
+# Compile out Register/Table descriptive strings to generate a
+# compact image
+#CFGFLAGS +=-DSOC_NO_NAMES
+#CFGFLAGS +=-DSOC_NO_ALIAS
+#CFGFLAGS +=-DSOC_NO_DESC
+
+# Reload/WarmBoot Support
+#
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+#
+# Need this for validation using SOC scripts; Will move to tcl
+# someday
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+#
+# Adds a CRC check on scache buffer: Calculate when saving,
+# and verify when loading.
+# When doing ISSU, both source and destination versions should either have
+# this flag enabled or disabled.
+#CFGFLAGS += -DSCACHE_CRC_CHECK
+
+################################################################
+#
+# Enable Easy Reload Support
+#
+################################################################
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT
+# For validation purposes
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT_SW_DUMP
+
+# Software Trunk failover Support
+#
+#CFGFLAGS += -DBCM_TRUNK_FAILOVER_SUPPORT
+
+################################################################
+#
+# Override default VXWORKS thread options to make set
+# VX_UNBREAKABLE flag in task creation.
+#
+################################################################
+#CFGFLAGS += -DVX_THREAD_OPT_UNBREAKABLE
+
+
+################################################################
+#
+# Use default priority for BDE interrupt thread.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_THREAD_PRIO_DEFAULT
+
+################################################################
+#
+# Use cached DMA memory when mapping kernel DMA memory to user
+# mode. Should only be enabled on cache-coherent platforms.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_CACHE_DMA_MEM
+
+################################################################
+#
+# Take the spl lock upon entering an ISR
+#
+################################################################
+#CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ
+
+################################################################
+#
+# Silently ignore NULL pointer free in sal_free API
+# Default behaviour is to assert if a NULL pointer is passed to sal_free
+#
+################################################################
+#CFGFLAGS += -DSAL_FREE_NULL_IGNORE
+
+################################################################
+# Enable SBX MPLS TP support
+################################################################
+#CFGFLAGS += -DBCM_SBX_MPLSTP_SUPPORT
+#CFGFLAGS += -DBCM_SBX_C1_MPLSTP_SUPPORT
+
+################################################################
+# Restrict SBX C2 Fte range to C2's range
+################################################################
+#CFGFLAGS += -DBCM_SBX_C1_C2_INTEROP
+
+################################################################
+# For historical reasons the PCI probe function skips device 12
+# by default to prevent a system hang on certain platforms.
+# Set this value to zero to probe all PCI devices.
+################################################################
+#CFGFLAGS += -DOVERRIDE_PCI_SKIP_DEV_MASK=0
+
+################################################################
+# Override max devices supported by PLI BDE
+################################################################
+#CFGFLAGS += -DPLI_MAX_DEVICES
+
+################################################################
+# Track BCM API calls to avoid deinitialization while calls active
+# This will incur a small time penalty for each BCM API call
+################################################################
+#CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+
+################################################################
+# Override default retry time for detach to wait for executing
+# APIs to complete.
+################################################################
+#CFGFLAGS += -DBCM_DETACH_POLL_INTERVAL_USECS_DEFAULT=100000
+#CFGFLAGS += -DBCM_DETACH_NUM_RETRIES_DEFAULT=3000
+
+################################################################
+# Disable the RX module initialization
+################################################################
+#CFGFLAGS += -DBCM_RX_DISABLE
+
+################################################################
+# Enable TX callback in interrupt thread
+################################################################
+#CFGFLAGS += -DTX_CB_INTR
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.arad b/bal_release/3rdparty/bcm-sdk/make/Make.local.arad
new file mode 100755
index 0000000..67c11f5
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.arad
@@ -0,0 +1,565 @@
+# $Id: Make.local.template,v 1.181 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License"). Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein. IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.
+#
+# Except as expressly set forth in the Authorized License,
+#
+# 1. This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#
+# 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+#
+# 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Usage for Make.local.template and Make.local:
+#
+# Make.local.template is checked into the tree, but Make.local is never
+# checked in. Copy Make.local.template to Make.local, then change
+# Make.local to select the desired compilation options (mostly debugging
+# features).
+#
+# Note on CFGFLAGS usage:
+#
+# Because CFGFLAGS may be used with other source preprocessing tools,
+# please limit the values added to CFGFLAGS to -D defines.
+#
+#
+# Table of Contents:
+#
+# Compiler Related Options
+# Boot and Debug Related Options
+# Operational and Policy Options
+# System Management and Multiple CPU Options
+# Selective Device Support (Switches and PHYs)
+# Miscellaneous Options
+#
+
+################################################################
+#
+# Compiler Related Options
+#
+################################################################
+
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#DEBUG_IFDEFS=FALSE
+
+# SAL resource usage tracking #ifdef control
+# DEBUG_IFDEFS should also be TRUE for this switch to take effect.
+#BCM_RESOURCE_USAGE_PROFILE_IFDEFS=TRUE
+
+# Uncomment to build without debug symbols
+#DEBUG_SYMBOLS=FALSE
+
+# Uncomment to add private CFLAGS
+#DEBUG_CFLAGS=
+
+# Uncomment to turn off the optimizer when debugging (recommended)
+#DEBUG_OPTIMIZE=FALSE
+
+# Compiling out assert() saves about 1.1% on executable size,
+# however do so is VERY MUCH discouraged.
+#DEBUG_ASSERTS=FALSE
+
+# Controlling GCC -pedantic flag
+#DEBUG_PEDANTIC=TRUE
+
+# compiler.h overrides, these disable various compiler
+# related features even if the compiler normally supports them
+
+# Disable use of long long for uint64
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_LONGLONG
+
+# Disable use of doubles
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_DOUBLE
+
+# Disable inlining of functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_INLINE
+
+# Disable use of const
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_CONST
+
+# Disable use of static functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_STATIC
+
+# Disable RPC flexible (long) bitmaps.
+# Warning: Disabling this changes the RPC version to 2 and
+# makes systems running this code incompatible with systems
+# running previous versions of BCM RPC code.
+#CFGFLAGS += -DBCM_RPC_PBMP_64
+
+#
+# Define if longs are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+#CFGFLAGS += -DLONGS_ARE_64BITS
+
+#
+# Define if pointers are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+# NOTE: This support works ONLY under conditions where the
+# upper 32 bits for ALL pointers are ZERO.
+#CFGFLAGS += -DPTRS_ARE_64BITS
+
+
+################################################################
+#
+# Boot and Debug Related Options
+#
+################################################################
+
+# Define this to add debug code for RX pool buffer tracking
+#CFGFLAGS += -DBCM_RXP_DEBUG
+
+# Allow debugging of PCI reads/writes (debug +pci)
+#CFGFLAGS += -DSOC_PCI_DEBUG
+
+# Make default debugging settings be 0 (very very quiet)
+#CFGFLAGS += -DNO_DEBUG_OUTPUT_DEFAULT
+
+# Don't use vxMemProbe
+#CFGFLAGS += -DVX_NO_MEM_PROBE
+
+# Allow debugging of Memory Allocation/Deallocation logging
+#CFGFLAGS += -DMEMLOG_SUPPORT
+
+################################################################
+################################################################
+#
+# Operational and Policy Options
+#
+################################################################
+
+# VLAN policy control:
+# NO_DEFAULT_ETHER do not init ether ports into vlan 1
+# NO_DEFAULT_CPU do not init cpu ports into vlan 1
+# NO_DEFAULT_SPI_SUBPORT do not init spi subports into vlan 1
+# NO_AUTO_STACK do not init stack/HG ports into created vlans
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_ETHER
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_CPU
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_SPI_SUBPORT
+#CFGFLAGS += -DBCM_VLAN_NO_AUTO_STACK
+
+# VLAN multicast flood Policy Control:
+# BCM_VLAN_MCAST_FLOOD_ALL Flood all multicast packets to the VLAN
+# BCM_VLAN_MCAST_FLOOD_UNKNOWN Flood unknown multicast packets to the vlan
+# BCM_VLAN_MCAST_FLOOD_NONE Forward multicast packets with known
+# destination addresses to the appropriate ports.
+# All packets destined to an unknown multicast
+# address are dropped.
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_ALL
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_UNKNOWN
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_NONE
+
+#Port Enable/Disable Policy control:
+# PORT_DEFAULT_DISABLE disable ports during switch initialization
+#CFGFLAGS += -DBCM_PORT_DEFAULT_DISABLE
+
+# sal thread priority override (this value used for all threads if defined)
+#CFGFLAGS += -DSAL_THREAD_PRIORITY=255
+
+# disable printing of thread name in messages
+#CFGFLAGS += -DSAL_THREAD_NAME_PRINT_DISABLE
+
+# disable runtime reading of flash config.bcm file (even if !NO_FILEIO)
+#CFGFLAGS += -DSAL_CONFIG_FILE_DISABLE
+
+# disable all Application SAL dependencies
+#NO_SAL_APPL=1
+
+
+# Prevent scheduling in SPL locks when interrupt code is run as a thread.
+# This option should not be necessary if all locks are implemented correctly,
+# however, some locks may still rely on the assumption that scheduling does
+# not occur when interrupts are disabled. If you experience any locking
+# problems in e.g. Linux User Mode, try enabling this option.
+# Please note that turning on this option will reduce performance by an
+# estimated 5 to 10 %.
+#CFGFLAGS += -DSAL_SPL_NO_PREEMPT
+
+# disable mapping of higig cosq when mapping priority to cosq
+# (use identity mapping instead : map prio0->cos0, prio1->cos1, ... , prio7->cos7)
+#CFGFLAGS += -DBCM_COSQ_HIGIG_MAP_DISABLE
+
+# Enable ukernel debugging module
+#CFGFLAGS += -DSOC_UKERNEL_DEBUG
+
+
+################################################################
+#
+# System Management and Multiple CPU Options
+#
+################################################################
+
+# Turn on BCMX inclusion
+# INCLUDE_BCMX for any support
+#INCLUDE_BCMX=1
+
+# Telekinesis suite applications for CPU to CPU communication and discovery
+# CPUDB: Simple CPU data base manager
+# CPUTRANS: CPU to CPU communication mechanisms
+# DISCOVER: Simple discovery; will also include CPUTRANS
+# STKTASK: Stack manager application
+#
+#CFGFLAGS += -DINCLUDE_LIB_CPUDB
+#CFGFLAGS += -DINCLUDE_LIB_CPUTRANS
+#CFGFLAGS += -DINCLUDE_LIB_DISCOVER
+#CFGFLAGS += -DINCLUDE_LIB_STKTASK
+
+# Option for discovery to use the application-data field in routing
+# packets for Board-ID and CPU base flag information.
+#CFGFLAGS += -DDISCOVER_APP_DATA_BOARDID
+
+# Optionally override list of included dispatch modules
+# Note: including RPC automatically includes the Telekinesis suite libs
+# ESW is the enterprise platforms.
+# ROBO includes the managed devices.
+# SBX includes API support for bcm988020QSK24X2
+#DISPATCH_LIST = RPC ESW ASYNC SBX
+
+# Define to have end-to-end flow control enabled on boards that
+# support it
+#CFGFLAGS += -DBCM_BOARD_AUTO_E2E
+
+# Define the following to support per-CPU transmit pointers.
+# This allows the TX setup and send functions to be defined on a
+# per-CPU basis, allowing mixed in-band and out-of-band communication.
+#CFGFLAGS += -DBCM_C2C_TRANSPORT_SWITCHING
+
+# Options for feature list (INCLUDE_XXX)
+# If FEATURE_LIST is defined, it is a list of features to include.
+# See Make.config for the default feature list.
+#
+# Avaliable features:
+#
+# BCMX
+# BCMX_DIAG
+# CHASSIS
+# CUSTOMER
+# DRIVERS
+# EDITLINE
+# I2C
+# L3
+# MEM_SCAN
+# ATPTRANS_SOCKET
+# TELNET
+# TEST
+# ACL
+# RCPU
+# KNET - Linux user mode kernel network support
+# BCM_SAL_PROFILE - make available an API to track SAL usage.
+# CINT - Include the C Interpreter in the diagnostic shell.
+# Please note this cannot be used in Linux kernel mode.
+# C_UNIT - Include the C unit testing framework. If CINT is also included
+# then hooks will be provided for use from it.
+# PHY_SYM_DBG - PHY GUI MDIO read/write support. Socket interface
+# to PHY GUI for Symbolic debugging.
+# APIMODE - call SDK API functions from shell, requires CINT
+# DUNE_UI - dune legacy user interface. For debug only. Tested
+# on linux-user-gto-2.6 only.
+# KBP - include nlm2(11K)/nlm3(12K) KBP support
+# BHH - Include Support for BHH Application (MPLS-TP OAM based on Y.1731)
+# using BTE on select devices.
+# AVS - Include AVS support
+#FEATURE_LIST=ATPTRANS_SOCKET BCMX_DIAG L3 I2C BCMX MEM_SCAN EDITLINE \
+# CUSTOMER TELNET DRIVERS CHASSIS TEST ACL RCPU BCM_SAL_PROFILE CINT \
+# PTP CES FCMAP BOARD KNET REGEX MACSEC APIMODE BFD KBP AVS
+
+FEATURE_LIST= INTR CINT BSAFE ATPTRANS_SOCKET L3 I2C MEM_SCAN EDITLINE TELNET DRIVERS CHASSIS TEST BCM_SAL_PROFILE RCPU DUNE_UI
+
+###############################################################
+# KBP supported devices
+#
+#Enable this for 11K device support
+#KBP_DEVICE = KBP_11K
+#
+#Enable this for 12K device support
+#KBP_DEVICE = KBP_ALG
+#
+###############################################################
+
+################################################################
+#
+# Selective Device Support (Switches and PHYs)
+#
+################################################################
+
+# Multiple Chip Support
+#
+# By default, the driver supports all Strata switch and fabric chips
+# included in this software release. It checks device IDs at runtime
+# to run the correct driver modules.
+#
+# To save space, the driver can be compiled to support just a subset of
+# the chips. To do this, uncomment the line for BCM_PTL_SPT (partial
+# support) and uncomment one line for each chip to support.
+#
+# Note that there are a lot more chips than drivers.
+# For example, the BCM5615 driver is also used for BCM5625 and BCM5645.
+#
+
+BCM_PTL_SPT = 1
+
+#BCM_5675_A0 = 1
+#BCM_56102_A0 = 1
+#BCM_56112_A0 = 1
+#BCM_56304_B0 = 1
+#BCM_56314_A0 = 1
+#BCM_56504_A0 = 1
+#BCM_56504_B0 = 1
+#BCM_56514_A0 = 1
+#BCM_56624_A0 = 1
+#BCM_56624_B0 = 1
+#BCM_56680_A0 = 1
+#BCM_56680_B0 = 1
+#BCM_56580_A0 = 1
+#BCM_56700_A0 = 1
+#BCM_56800_A0 = 1
+#BCM_56218_A0 = 1
+#BCM_56224_A0 = 1
+#BCM_56224_B0 = 1
+#BCM_56725_A0 = 1
+#BCM_56820_A0 = 1
+#BCM_53314_A0 = 1
+#BCM_53324_A0 = 1
+#BCM_56634_A0 = 1
+#BCM_56634_B0 = 1
+#BCM_56524_A0 = 1
+#BCM_56524_B0 = 1
+#BCM_56685_A0 = 1
+#BCM_56685_B0 = 1
+#BCM_56334_A0 = 1
+#BCM_56334_B0 = 1
+#BCM_56840_A0 = 1
+#BCM_56840_B0 = 1
+#BCM_56850_A0 = 1
+#BCM_56142_A0 = 1
+#BCM_56150_A0 = 1
+#BCM_56836_A0 = 1
+#BCM_56640_A0 = 1
+#BCM_56440_A0 = 1
+#BCM_56440_B0 = 1
+#BCM_56450_A0 = 1
+#BCM_56960_A0 = 1
+#BCM_56860_A0 = 1
+
+#BCM_5338_A0 = 1
+#BCM_5380_A0 = 1
+#BCM_5338_B0 = 1
+#BCM_5325_A1 = 1
+
+#BCM_5324_A0 = 1
+#BCM_5396_A0 = 1
+#BCM_5389_A0 = 1
+#BCM_5398_A0 = 1
+#BCM_5324_A1 = 1
+#BCM_53115_A0 = 1
+#BCM_53118_A0 = 1
+#BCM_53280_A0 = 1
+#BCM_53280_B0 = 1
+#BCM_53101_A0 = 1
+#BCM_53125_A0 = 1
+#BCM_53128_A0 = 1
+#BCM_53600_A0 = 1
+#BCM_89500_A0 = 1
+
+#BCM_88030_A0 = 1
+#BCM_QE2000_A0 = 1
+#BCM_BME3200_B0 = 1
+#BCM_BM9600_A0 = 1
+#BCM_88230_A0 = 1
+#BCM_88230_B0 = 1
+#BCM_88230_C0 = 1
+BCM_88640_A0=1
+BCM_88650_A0=1
+BCM_88650_B0=1
+BCM_88660_A0=1
+
+#BCM_TK371X_A0 = 1
+
+# Options for multiple PHY support
+# If BCM_PHY_LIST is defined, it is a list of PHYs to include.
+# The default is to include all of them.
+# If none of them should be included specify BCM_PHY_LIST=EMPTY
+#BCM_PHY_LIST=522X 54XX 5464 5421S 5482 54616 54680 54680E 52681E 54880E 54682 54684 54640 54640E 54880 SERDES SIMUL 8703 8705 8706 8072 8040 8481 8750 8729 84740 84756 84328 EMPTY
+
+# Options for BCM5338 5380
+#CFGFLAGS += -DROBO_OLD
+#ROBO_OLD = 1
+
+# Support for phy simulation
+#CFGFLAGS += -DINCLUDE_PHY_SIMUL
+#CFGFLAGS += -DSIM_ALL_PHYS # All phys use simulation driver
+#CFGFLAGS += -DSIM_CMIC_LINK_STAT # Get link status from CMIC register
+
+# Support for BOARD library
+# if BOARD_LIST is defined, it is a list of Board drivers to include.
+# The default is to include all board drivers appropriate for the devices
+# included in the build. If none of them should be included specify
+# BOARD_LIST=EMPTY.
+#BOARD_LIST=GENERIC
+
+# Support for event logging
+#CFGFLAGS += -DINCLUDE_SHARED_EVLOG
+
+# Support for BCM API port translation
+#CFGFLAGS += -DINCLUDE_BCM_API_XLATE_PORT
+
+# Support for callback error checks and abort in traverse api's
+#CFGFLAGS += -DBCM_CB_ABORT_ON_ERR
+################################################################
+#
+# Misc Options
+#
+################################################################
+#CFGFLAGS += -DSOC_MEM_L3_DEFIP_WAR
+
+# Compile out Register/Table descriptive strings to generate a
+# compact image
+#CFGFLAGS +=-DSOC_NO_NAMES
+#CFGFLAGS +=-DSOC_NO_ALIAS
+#CFGFLAGS +=-DSOC_NO_DESC
+
+# Reload/WarmBoot Support
+#
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+#
+# Need this for validation using SOC scripts; Will move to tcl
+# someday
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+#
+# Adds a CRC check on scache buffer: Calculate when saving,
+# and verify when loading.
+# When doing ISSU, both source and destination versions should either have
+# this flag enabled or disabled.
+#CFGFLAGS += -DSCACHE_CRC_CHECK
+
+################################################################
+#
+# Enable Easy Reload Support
+#
+################################################################
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT
+# For validation purposes
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT_SW_DUMP
+
+# Software Trunk failover Support
+#
+#CFGFLAGS += -DBCM_TRUNK_FAILOVER_SUPPORT
+
+################################################################
+#
+# Override default VXWORKS thread options to make set
+# VX_UNBREAKABLE flag in task creation.
+#
+################################################################
+#CFGFLAGS += -DVX_THREAD_OPT_UNBREAKABLE
+
+
+################################################################
+#
+# Use default priority for BDE interrupt thread.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_THREAD_PRIO_DEFAULT
+
+################################################################
+#
+# Use cached DMA memory when mapping kernel DMA memory to user
+# mode. Should only be enabled on cache-coherent platforms.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_CACHE_DMA_MEM
+
+################################################################
+#
+# Take the spl lock upon entering an ISR
+#
+################################################################
+#CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ
+
+################################################################
+#
+# Silently ignore NULL pointer free in sal_free API
+# Default behaviour is to assert if a NULL pointer is passed to sal_free
+#
+################################################################
+#CFGFLAGS += -DSAL_FREE_NULL_IGNORE
+
+################################################################
+# Enable SBX MPLS TP support
+################################################################
+#CFGFLAGS += -DBCM_SBX_MPLSTP_SUPPORT
+#CFGFLAGS += -DBCM_SBX_C1_MPLSTP_SUPPORT
+
+################################################################
+# Restrict SBX C2 Fte range to C2's range
+################################################################
+#CFGFLAGS += -DBCM_SBX_C1_C2_INTEROP
+
+################################################################
+# For historical reasons the PCI probe function skips device 12
+# by default to prevent a system hang on certain platforms.
+# Set this value to zero to probe all PCI devices.
+################################################################
+#CFGFLAGS += -DOVERRIDE_PCI_SKIP_DEV_MASK=0
+
+################################################################
+# Override max devices supported by PLI BDE
+################################################################
+#CFGFLAGS += -DPLI_MAX_DEVICES
+
+################################################################
+# Track BCM API calls to avoid deinitialization while calls active
+# This will incur a small time penalty for each BCM API call
+################################################################
+#CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+
+################################################################
+# Override default retry time for detach to wait for executing
+# APIs to complete.
+################################################################
+#CFGFLAGS += -DBCM_DETACH_POLL_INTERVAL_USECS_DEFAULT=100000
+#CFGFLAGS += -DBCM_DETACH_NUM_RETRIES_DEFAULT=3000
+
+################################################################
+# Disable the RX module initialization
+################################################################
+#CFGFLAGS += -DBCM_RX_DISABLE
+
+################################################################
+# Enable TX callback in interrupt thread
+################################################################
+#CFGFLAGS += -DTX_CB_INTR
+
+override SBX_CHIPS=
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.kt2 b/bal_release/3rdparty/bcm-sdk/make/Make.local.kt2
new file mode 100755
index 0000000..d7876b1
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.kt2
@@ -0,0 +1,562 @@
+# $Id: Make.local.template,v 1.181 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License"). Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein. IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.
+#
+# Except as expressly set forth in the Authorized License,
+#
+# 1. This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#
+# 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+#
+# 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Usage for Make.local.template and Make.local:
+#
+# Make.local.template is checked into the tree, but Make.local is never
+# checked in. Copy Make.local.template to Make.local, then change
+# Make.local to select the desired compilation options (mostly debugging
+# features).
+#
+# Note on CFGFLAGS usage:
+#
+# Because CFGFLAGS may be used with other source preprocessing tools,
+# please limit the values added to CFGFLAGS to -D defines.
+#
+#
+# Table of Contents:
+#
+# Compiler Related Options
+# Boot and Debug Related Options
+# Operational and Policy Options
+# System Management and Multiple CPU Options
+# Selective Device Support (Switches and PHYs)
+# Miscellaneous Options
+#
+
+################################################################
+#
+# Compiler Related Options
+#
+################################################################
+
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#DEBUG_IFDEFS=FALSE
+
+# SAL resource usage tracking #ifdef control
+# DEBUG_IFDEFS should also be TRUE for this switch to take effect.
+#BCM_RESOURCE_USAGE_PROFILE_IFDEFS=TRUE
+
+# Uncomment to build without debug symbols
+#DEBUG_SYMBOLS=FALSE
+
+# Uncomment to add private CFLAGS
+#DEBUG_CFLAGS=
+
+# Uncomment to turn off the optimizer when debugging (recommended)
+#DEBUG_OPTIMIZE=FALSE
+
+# Compiling out assert() saves about 1.1% on executable size,
+# however do so is VERY MUCH discouraged.
+#DEBUG_ASSERTS=FALSE
+
+# Controlling GCC -pedantic flag
+#DEBUG_PEDANTIC=TRUE
+
+# compiler.h overrides, these disable various compiler
+# related features even if the compiler normally supports them
+
+# Disable use of long long for uint64
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_LONGLONG
+
+# Disable use of doubles
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_DOUBLE
+
+# Disable inlining of functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_INLINE
+
+# Disable use of const
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_CONST
+
+# Disable use of static functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_STATIC
+
+# Disable RPC flexible (long) bitmaps.
+# Warning: Disabling this changes the RPC version to 2 and
+# makes systems running this code incompatible with systems
+# running previous versions of BCM RPC code.
+#CFGFLAGS += -DBCM_RPC_PBMP_64
+
+#
+# Define if longs are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+#CFGFLAGS += -DLONGS_ARE_64BITS
+
+#
+# Define if pointers are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+# NOTE: This support works ONLY under conditions where the
+# upper 32 bits for ALL pointers are ZERO.
+#CFGFLAGS += -DPTRS_ARE_64BITS
+
+
+################################################################
+#
+# Boot and Debug Related Options
+#
+################################################################
+
+# Define this to add debug code for RX pool buffer tracking
+#CFGFLAGS += -DBCM_RXP_DEBUG
+
+# Allow debugging of PCI reads/writes (debug +pci)
+#CFGFLAGS += -DSOC_PCI_DEBUG
+
+# Make default debugging settings be 0 (very very quiet)
+#CFGFLAGS += -DNO_DEBUG_OUTPUT_DEFAULT
+
+# Don't use vxMemProbe
+#CFGFLAGS += -DVX_NO_MEM_PROBE
+
+# Allow debugging of Memory Allocation/Deallocation logging
+#CFGFLAGS += -DMEMLOG_SUPPORT
+
+################################################################
+################################################################
+#
+# Operational and Policy Options
+#
+################################################################
+
+# VLAN policy control:
+# NO_DEFAULT_ETHER do not init ether ports into vlan 1
+# NO_DEFAULT_CPU do not init cpu ports into vlan 1
+# NO_DEFAULT_SPI_SUBPORT do not init spi subports into vlan 1
+# NO_AUTO_STACK do not init stack/HG ports into created vlans
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_ETHER
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_CPU
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_SPI_SUBPORT
+#CFGFLAGS += -DBCM_VLAN_NO_AUTO_STACK
+
+# VLAN multicast flood Policy Control:
+# BCM_VLAN_MCAST_FLOOD_ALL Flood all multicast packets to the VLAN
+# BCM_VLAN_MCAST_FLOOD_UNKNOWN Flood unknown multicast packets to the vlan
+# BCM_VLAN_MCAST_FLOOD_NONE Forward multicast packets with known
+# destination addresses to the appropriate ports.
+# All packets destined to an unknown multicast
+# address are dropped.
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_ALL
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_UNKNOWN
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_NONE
+
+#Port Enable/Disable Policy control:
+# PORT_DEFAULT_DISABLE disable ports during switch initialization
+#CFGFLAGS += -DBCM_PORT_DEFAULT_DISABLE
+
+# sal thread priority override (this value used for all threads if defined)
+#CFGFLAGS += -DSAL_THREAD_PRIORITY=255
+
+# disable printing of thread name in messages
+#CFGFLAGS += -DSAL_THREAD_NAME_PRINT_DISABLE
+
+# disable runtime reading of flash config.bcm file (even if !NO_FILEIO)
+#CFGFLAGS += -DSAL_CONFIG_FILE_DISABLE
+
+# disable all Application SAL dependencies
+#NO_SAL_APPL=1
+
+
+# Prevent scheduling in SPL locks when interrupt code is run as a thread.
+# This option should not be necessary if all locks are implemented correctly,
+# however, some locks may still rely on the assumption that scheduling does
+# not occur when interrupts are disabled. If you experience any locking
+# problems in e.g. Linux User Mode, try enabling this option.
+# Please note that turning on this option will reduce performance by an
+# estimated 5 to 10 %.
+#CFGFLAGS += -DSAL_SPL_NO_PREEMPT
+
+# disable mapping of higig cosq when mapping priority to cosq
+# (use identity mapping instead : map prio0->cos0, prio1->cos1, ... , prio7->cos7)
+#CFGFLAGS += -DBCM_COSQ_HIGIG_MAP_DISABLE
+
+# Enable ukernel debugging module
+#CFGFLAGS += -DSOC_UKERNEL_DEBUG
+
+
+################################################################
+#
+# System Management and Multiple CPU Options
+#
+################################################################
+
+# Turn on BCMX inclusion
+# INCLUDE_BCMX for any support
+INCLUDE_BCMX=1
+
+# Telekinesis suite applications for CPU to CPU communication and discovery
+# CPUDB: Simple CPU data base manager
+# CPUTRANS: CPU to CPU communication mechanisms
+# DISCOVER: Simple discovery; will also include CPUTRANS
+# STKTASK: Stack manager application
+#
+#CFGFLAGS += -DINCLUDE_LIB_CPUDB
+#CFGFLAGS += -DINCLUDE_LIB_CPUTRANS
+#CFGFLAGS += -DINCLUDE_LIB_DISCOVER
+#CFGFLAGS += -DINCLUDE_LIB_STKTASK
+
+# Option for discovery to use the application-data field in routing
+# packets for Board-ID and CPU base flag information.
+#CFGFLAGS += -DDISCOVER_APP_DATA_BOARDID
+
+# Optionally override list of included dispatch modules
+# Note: including RPC automatically includes the Telekinesis suite libs
+# ESW is the enterprise platforms.
+# ROBO includes the managed devices.
+# SBX includes API support for bcm988020QSK24X2
+#DISPATCH_LIST = RPC ESW ASYNC SBX
+
+# Define to have end-to-end flow control enabled on boards that
+# support it
+#CFGFLAGS += -DBCM_BOARD_AUTO_E2E
+
+# Define the following to support per-CPU transmit pointers.
+# This allows the TX setup and send functions to be defined on a
+# per-CPU basis, allowing mixed in-band and out-of-band communication.
+#CFGFLAGS += -DBCM_C2C_TRANSPORT_SWITCHING
+
+# Options for feature list (INCLUDE_XXX)
+# If FEATURE_LIST is defined, it is a list of features to include.
+# See Make.config for the default feature list.
+#
+# Avaliable features:
+#
+# BCMX
+# BCMX_DIAG
+# CHASSIS
+# CUSTOMER
+# DRIVERS
+# EDITLINE
+# I2C
+# L3
+# MEM_SCAN
+# ATPTRANS_SOCKET
+# TELNET
+# TEST
+# ACL
+# RCPU
+# KNET - Linux user mode kernel network support
+# BCM_SAL_PROFILE - make available an API to track SAL usage.
+# CINT - Include the C Interpreter in the diagnostic shell.
+# Please note this cannot be used in Linux kernel mode.
+# C_UNIT - Include the C unit testing framework. If CINT is also included
+# then hooks will be provided for use from it.
+# PHY_SYM_DBG - PHY GUI MDIO read/write support. Socket interface
+# to PHY GUI for Symbolic debugging.
+# APIMODE - call SDK API functions from shell, requires CINT
+# DUNE_UI - dune legacy user interface. For debug only. Tested
+# on linux-user-gto-2.6 only.
+# KBP - include nlm2(11K)/nlm3(12K) KBP support
+# BHH - Include Support for BHH Application (MPLS-TP OAM based on Y.1731)
+# using BTE on select devices.
+# AVS - Include AVS support
+#FEATURE_LIST=ATPTRANS_SOCKET BCMX_DIAG L3 I2C BCMX MEM_SCAN EDITLINE \
+# CUSTOMER TELNET DRIVERS CHASSIS TEST ACL RCPU BCM_SAL_PROFILE CINT \
+# PTP CES FCMAP BOARD KNET REGEX MACSEC APIMODE BFD KBP AVS
+
+FEATURE_LIST= ATPTRANS_SOCKET PTP CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE BCM_SAL_PROFILE CUSTOMER TEST CHASSIS MSTP RCPU
+
+###############################################################
+# KBP supported devices
+#
+#Enable this for 11K device support
+#KBP_DEVICE = KBP_11K
+#
+#Enable this for 12K device support
+#KBP_DEVICE = KBP_ALG
+#
+###############################################################
+
+################################################################
+#
+# Selective Device Support (Switches and PHYs)
+#
+################################################################
+
+# Multiple Chip Support
+#
+# By default, the driver supports all Strata switch and fabric chips
+# included in this software release. It checks device IDs at runtime
+# to run the correct driver modules.
+#
+# To save space, the driver can be compiled to support just a subset of
+# the chips. To do this, uncomment the line for BCM_PTL_SPT (partial
+# support) and uncomment one line for each chip to support.
+#
+# Note that there are a lot more chips than drivers.
+# For example, the BCM5615 driver is also used for BCM5625 and BCM5645.
+#
+
+BCM_PTL_SPT = 1
+
+#BCM_5675_A0 = 1
+#BCM_56102_A0 = 1
+#BCM_56112_A0 = 1
+#BCM_56304_B0 = 1
+#BCM_56314_A0 = 1
+#BCM_56504_A0 = 1
+#BCM_56504_B0 = 1
+#BCM_56514_A0 = 1
+#BCM_56624_A0 = 1
+#BCM_56624_B0 = 1
+#BCM_56680_A0 = 1
+#BCM_56680_B0 = 1
+#BCM_56580_A0 = 1
+#BCM_56700_A0 = 1
+#BCM_56800_A0 = 1
+#BCM_56218_A0 = 1
+#BCM_56224_A0 = 1
+#BCM_56224_B0 = 1
+#BCM_56725_A0 = 1
+#BCM_56820_A0 = 1
+#BCM_53314_A0 = 1
+#BCM_53324_A0 = 1
+#BCM_56634_A0 = 1
+#BCM_56634_B0 = 1
+#BCM_56524_A0 = 1
+#BCM_56524_B0 = 1
+#BCM_56685_A0 = 1
+#BCM_56685_B0 = 1
+#BCM_56334_A0 = 1
+#BCM_56334_B0 = 1
+#BCM_56840_A0 = 1
+#BCM_56840_B0 = 1
+#BCM_56850_A0 = 1
+#BCM_56142_A0 = 1
+#BCM_56150_A0 = 1
+#BCM_56836_A0 = 1
+#BCM_56640_A0 = 1
+BCM_56440_A0 = 1
+BCM_56440_B0 = 1
+BCM_56450_A0 = 1
+BCM_56450_B0 = 1
+BCM_56450_B1 = 1
+#BCM_56960_A0 = 1
+#BCM_56860_A0 = 1
+
+#BCM_5338_A0 = 1
+#BCM_5380_A0 = 1
+#BCM_5338_B0 = 1
+#BCM_5325_A1 = 1
+
+#BCM_5324_A0 = 1
+#BCM_5396_A0 = 1
+#BCM_5389_A0 = 1
+#BCM_5398_A0 = 1
+#BCM_5324_A1 = 1
+#BCM_53115_A0 = 1
+#BCM_53118_A0 = 1
+#BCM_53280_A0 = 1
+#BCM_53280_B0 = 1
+#BCM_53101_A0 = 1
+#BCM_53125_A0 = 1
+#BCM_53128_A0 = 1
+#BCM_53600_A0 = 1
+#BCM_89500_A0 = 1
+
+#BCM_88030_A0 = 1
+#BCM_QE2000_A0 = 1
+#BCM_BME3200_B0 = 1
+#BCM_BM9600_A0 = 1
+#BCM_88230_A0 = 1
+#BCM_88230_B0 = 1
+#BCM_88230_C0 = 1
+
+#BCM_TK371X_A0 = 1
+
+# Options for multiple PHY support
+# If BCM_PHY_LIST is defined, it is a list of PHYs to include.
+# The default is to include all of them.
+# If none of them should be included specify BCM_PHY_LIST=EMPTY
+#BCM_PHY_LIST=522X 54XX 5464 5421S 5482 54616 54680 54680E 52681E 54880E 54682 54684 54640 54640E 54880 SERDES SIMUL 8703 8705 8706 8072 8040 8481 8750 8729 84740 84756 84328 EMPTY
+
+# Options for BCM5338 5380
+#CFGFLAGS += -DROBO_OLD
+#ROBO_OLD = 1
+
+# Support for phy simulation
+#CFGFLAGS += -DINCLUDE_PHY_SIMUL
+#CFGFLAGS += -DSIM_ALL_PHYS # All phys use simulation driver
+#CFGFLAGS += -DSIM_CMIC_LINK_STAT # Get link status from CMIC register
+
+# Support for BOARD library
+# if BOARD_LIST is defined, it is a list of Board drivers to include.
+# The default is to include all board drivers appropriate for the devices
+# included in the build. If none of them should be included specify
+# BOARD_LIST=EMPTY.
+#BOARD_LIST=GENERIC
+
+# Support for event logging
+#CFGFLAGS += -DINCLUDE_SHARED_EVLOG
+
+# Support for BCM API port translation
+#CFGFLAGS += -DINCLUDE_BCM_API_XLATE_PORT
+
+# Support for callback error checks and abort in traverse api's
+#CFGFLAGS += -DBCM_CB_ABORT_ON_ERR
+################################################################
+#
+# Misc Options
+#
+################################################################
+#CFGFLAGS += -DSOC_MEM_L3_DEFIP_WAR
+
+# Compile out Register/Table descriptive strings to generate a
+# compact image
+#CFGFLAGS +=-DSOC_NO_NAMES
+#CFGFLAGS +=-DSOC_NO_ALIAS
+#CFGFLAGS +=-DSOC_NO_DESC
+
+# Reload/WarmBoot Support
+#
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+#
+# Need this for validation using SOC scripts; Will move to tcl
+# someday
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+#
+# Adds a CRC check on scache buffer: Calculate when saving,
+# and verify when loading.
+# When doing ISSU, both source and destination versions should either have
+# this flag enabled or disabled.
+#CFGFLAGS += -DSCACHE_CRC_CHECK
+
+################################################################
+#
+# Enable Easy Reload Support
+#
+################################################################
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT
+# For validation purposes
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT_SW_DUMP
+
+# Software Trunk failover Support
+#
+#CFGFLAGS += -DBCM_TRUNK_FAILOVER_SUPPORT
+
+################################################################
+#
+# Override default VXWORKS thread options to make set
+# VX_UNBREAKABLE flag in task creation.
+#
+################################################################
+#CFGFLAGS += -DVX_THREAD_OPT_UNBREAKABLE
+
+
+################################################################
+#
+# Use default priority for BDE interrupt thread.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_THREAD_PRIO_DEFAULT
+
+################################################################
+#
+# Use cached DMA memory when mapping kernel DMA memory to user
+# mode. Should only be enabled on cache-coherent platforms.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_CACHE_DMA_MEM
+
+################################################################
+#
+# Take the spl lock upon entering an ISR
+#
+################################################################
+#CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ
+
+################################################################
+#
+# Silently ignore NULL pointer free in sal_free API
+# Default behaviour is to assert if a NULL pointer is passed to sal_free
+#
+################################################################
+#CFGFLAGS += -DSAL_FREE_NULL_IGNORE
+
+################################################################
+# Enable SBX MPLS TP support
+################################################################
+#CFGFLAGS += -DBCM_SBX_MPLSTP_SUPPORT
+#CFGFLAGS += -DBCM_SBX_C1_MPLSTP_SUPPORT
+
+################################################################
+# Restrict SBX C2 Fte range to C2's range
+################################################################
+#CFGFLAGS += -DBCM_SBX_C1_C2_INTEROP
+
+################################################################
+# For historical reasons the PCI probe function skips device 12
+# by default to prevent a system hang on certain platforms.
+# Set this value to zero to probe all PCI devices.
+################################################################
+#CFGFLAGS += -DOVERRIDE_PCI_SKIP_DEV_MASK=0
+
+################################################################
+# Override max devices supported by PLI BDE
+################################################################
+#CFGFLAGS += -DPLI_MAX_DEVICES
+
+################################################################
+# Track BCM API calls to avoid deinitialization while calls active
+# This will incur a small time penalty for each BCM API call
+################################################################
+#CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+
+################################################################
+# Override default retry time for detach to wait for executing
+# APIs to complete.
+################################################################
+#CFGFLAGS += -DBCM_DETACH_POLL_INTERVAL_USECS_DEFAULT=100000
+#CFGFLAGS += -DBCM_DETACH_NUM_RETRIES_DEFAULT=3000
+
+################################################################
+# Disable the RX module initialization
+################################################################
+#CFGFLAGS += -DBCM_RX_DISABLE
+
+################################################################
+# Enable TX callback in interrupt thread
+################################################################
+#CFGFLAGS += -DTX_CB_INTR
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.qax b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax
new file mode 100644
index 0000000..1a47e1b
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax
@@ -0,0 +1,28 @@
+FEATURE_LIST := CINT L3 I2C MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CHASSIS RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP
+
+DEBUG_CFLAGS=-Wdeclaration-after-statement
+
+BCM_PTL_SPT=1
+
+ALL_DPP_CHIPS = 1
+ALL_DFE_CHIPS = 1
+
+# Includes XML library and enables use of "diag pp dump" utility for PP import/export facilities
+DATAIO_SUPPORT = 1
+KERN_VER=3.7.10
+
+CFGFLAGS += -DSTATIC=static
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+CFGFLAGS += -DBCM_EASY_RELOAD_WB_COMPAT_SUPPORT
+CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+CFGFLAGS += -D__DUNE_LINUX_BCM_CPU_PCIE__
+CFGFLAGS += -DPHYS_ADDRS_ARE_64BITS -DSAL_BDE_32BIT_USER_64BIT_KERNEL
+CFGFLAGS += -D_SIMPLE_MEMORY_ALLOCATION_=0 -DUSE_LINUX_BDE_MMAP=1
+CFGFLAGS += -DSCACHE_CRC_CHECK
+
+CFGFLAGS += -DBROADCOM_SVK
+
+
+VENDOR_LIST=CUSTOMER78 BROADCOM DNX
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.qax_sim b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax_sim
new file mode 100644
index 0000000..9f2c402
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax_sim
@@ -0,0 +1,33 @@
+#FEATURE_LIST := CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CUSTOMER CHASSIS MSTP RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP KBP
+
+FEATURE_LIST := CINT L3 I2C MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CUSTOMER CHASSIS RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP
+
+DEBUG_CFLAGS=-Wdeclaration-after-statement
+
+BCM_PTL_SPT=1
+
+ALL_DPP_CHIPS = 1
+ALL_DFE_CHIPS = 1
+
+# Includes XML library and enables use of "diag pp dump" utility for PP import/export facilities
+DATAIO_SUPPORT = 1
+KERN_VER=3.7.10
+
+CFGFLAGS += -DSTATIC=static
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+CFGFLAGS += -DBCM_EASY_RELOAD_WB_COMPAT_SUPPORT
+CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+CFGFLAGS += -D__DUNE_LINUX_BCM_CPU_PCIE__
+CFGFLAGS += -DPHYS_ADDRS_ARE_64BITS -DSAL_BDE_32BIT_USER_64BIT_KERNEL
+CFGFLAGS += -D_SIMPLE_MEMORY_ALLOCATION_=0 -DUSE_LINUX_BDE_MMAP=1
+CFGFLAGS += -DSCACHE_CRC_CHECK
+
+CFGFLAGS += -DBROADCOM_SVK
+
+CFGFLAGS += -Wno-format-security -Wno-unused-but-set-variable
+
+#KBP_DEVICE := KBP_ALG
+
+VENDOR_LIST=CUSTOMER78 BROADCOM DNX
+