diff --git a/bal_release/3rdparty/bcm-sdk/Makefile b/bal_release/3rdparty/bcm-sdk/Makefile
new file mode 100644
index 0000000..5e0dfd6
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/Makefile
@@ -0,0 +1,30 @@
+# Switch SDK for KT2
+#
+
+ifneq ("$(TEST_SW_UTIL_LOOPBACK)", "y")
+
+MOD_NAME = switch_sdk
+MOD_TYPE = lib
+
+MOD_INC_DIRS  = $(ING_SDK_DIR)/include
+MOD_INC_DIRS  += $(ING_SDK_DIR)/libs/phymod/include
+MOD_LIBS_NOREC_BEFORE = $(shell cat ${ING_SDK_DIR}/.bcm_objs)
+MOD_LIBS  = $(shell cat ${ING_SDK_DIR}/.bcm_libs)
+MOD_LIBS_NOREC_AFTER  = $(shell cat ${ING_SDK_DIR}/.bcm_ldflags | sed -e 's/-static //') -lutil
+
+# Building with libnetconf requires special care because libxml in bcm_sdk conflicts
+# with newer libxml2
+ifeq ("$(NC_AGENT)", "libnetconf")
+	MOD_LIBS := $(subst -lxml,,$(MOD_LIBS))
+
+	# This is tricky again. SDK build can include multiple versions of xml_api.o
+	# built for different architectures. We need to pick the right one.
+	_all_xml_api := $(shell find $(ING_SDK_DIR) -name xml_api.o)
+	_arch := $(shell file $(firstword $(MOD_LIBS_NOREC_BEFORE)) | awk '{print $$7}')
+	_xml_api := $(shell for aa in $(_all_xml_api); do _test_arch=`file $$aa | awk '{print $$7}'`; if [[ \"$(_arch)\" = \"$$_test_arch\" ]]; then echo $$aa; fi; done) 
+	
+	MOD_LIBS_NOREC_AFTER += $(_xml_api) 
+endif
+
+# end of ifneq ("$(TEST_SW_UTIL_LOOPBACK)", "y")
+endif
diff --git a/bal_release/3rdparty/bcm-sdk/Makefile.sdk b/bal_release/3rdparty/bcm-sdk/Makefile.sdk
new file mode 100644
index 0000000..5f1776d
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/Makefile.sdk
@@ -0,0 +1,60 @@
+# ING SDK
+#
+
+ifeq ("$(BOARD)", "wrx")
+    TARGET_DIR ?= systems/linux/user/wrx-3_7
+else
+    TARGET_DIR ?= systems/sim
+    export CONFIG_SWITCH_RPC=y
+endif
+
+export BUILD_ING_AS_LIB=1
+export SDK=$(ING_SDK_DIR)
+
+ifeq ("$(BOARD)", "wrx")
+    CMD_PARMS=platform=wrx-3_7 bldroot_suffix=/wrx-3_7 kernel_version=3_7 LINUX_MAKE_SHARED_LIB=0 SHAREDLIBVER=1 WRX_64BIT=1
+    $(info evaluating $(CMD_PARMS)) 
+    $(foreach _cmd,$(CMD_PARMS),$(eval export $(_cmd)))
+    include $(ING_SDK_DIR)/systems/linux/user/common/Makefile
+    BCM_LIBS_DEPS = user_libs $(BLDDIR)/socdiag.o $(BLDDIR)/version.o $(PLATFORM_DEFINES_OBJ) $(KERNEL_BDE) $(USER_BDE)
+    MAIN_LIB := $(BLDDIR)/socdiag.o $(MAIN_LIB) 
+    CGLAGS += $(ARCH_FLAGS)
+
+$(BLDDIR)/socdiag.o:: $(ING_SDK_DIR)/systems/linux/user/common/socdiag.c
+	@mkdir -p $(BLDDIR)
+	$(CC) -c -o $@ $(CFLAGS) $<
+
+else
+
+    include $(ING_SDK_DIR)/$(TARGET_DIR)/Makefile
+ 
+ifdef DPP_CHIPS
+$(LIBDIR)/libchipsim_sim.$(libext):
+	make -C $(ING_SDK_DIR)/$(TARGET_DIR)/dpp/ChipSim
+endif
+
+    BCM_LIBS_DEPS = $(MAIN_LIB) _bde _bcm_libraries $(BLDDIR)/version.o $(PLATFORM_DEFINES_OBJ) $(BCM_LIBS_BLD)
+
+endif
+
+# ING SDK links very strange. Instead of using -l, all libraries are added to executable as objects
+# it is better to convert to -l directives
+BCM_LIB_PATH 	:= $(dir $(firstword $(BCM_LIBS_BLD)))
+BCM_LIB_LIST 	:= $(patsubst lib%.a,-l%,$(notdir $(BCM_LIBS_BLD)))
+EXTRA_CFLAGS    += -Wno-error=unused-value -Wno-unused-but-set-variable -Wno-format-security
+export EXTRA_CFLAGS 
+
+sdk: $(ING_SDK_DIR)/.bcm_libs
+	echo "done: `ls $(ING_SDK_DIR)/$(TARGET_DIR)/`"
+	
+$(ING_SDK_DIR)/.bcm_libs: $(BCM_LIBS_DEPS)
+	echo "Building BCM SDK ... $(TARGET_DIR)"
+	@echo $(MAIN_LIB) $(BLDDIR)/version.o $(PLATFORM_DEFINES_OBJ) > $(ING_SDK_DIR)/.bcm_objs
+	@echo -L$(BCM_LIB_PATH) $(BCM_LIB_LIST) > $(ING_SDK_DIR)/.bcm_libs
+	@echo $(LDFLAGS) > $(ING_SDK_DIR)/.bcm_ldflags
+
+$(BLDDIR)/%.o:: $(ING_SDK_DIR)/$(TARGET_DIR)/%.c
+	@mkdir -p $(BLDDIR)
+	$(CC) -c -o $@ $(CFLAGS) $<
+
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.all b/bal_release/3rdparty/bcm-sdk/make/Make.local.all
new file mode 100755
index 0000000..9fa470f
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.all
@@ -0,0 +1,571 @@
+# $Id: Make.local.template,v 1.181 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Usage for Make.local.template and Make.local:
+#
+# Make.local.template is checked into the tree, but Make.local is never
+# checked in.  Copy Make.local.template to Make.local, then change
+# Make.local to select the desired compilation options (mostly debugging
+# features).
+#
+# Note on CFGFLAGS usage:
+#
+#   Because CFGFLAGS may be used with other source preprocessing tools,
+#   please limit the values added to CFGFLAGS to -D defines.
+#
+#
+# Table of Contents:
+#
+#     Compiler Related Options
+#     Boot and Debug Related Options
+#     Operational and Policy Options
+#     System Management and Multiple CPU Options
+#     Selective Device Support (Switches and PHYs)
+#     Miscellaneous Options
+#
+
+################################################################
+#
+# Compiler Related Options
+#
+################################################################
+
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#DEBUG_IFDEFS=FALSE
+
+# SAL resource usage tracking #ifdef control
+# DEBUG_IFDEFS should also be  TRUE for this switch to take effect.
+#BCM_RESOURCE_USAGE_PROFILE_IFDEFS=TRUE
+
+# Uncomment to build without debug symbols
+#DEBUG_SYMBOLS=FALSE
+
+# Uncomment to add private CFLAGS
+#DEBUG_CFLAGS=
+
+# Uncomment to turn off the optimizer when debugging (recommended)
+#DEBUG_OPTIMIZE=FALSE
+
+# Compiling out assert() saves about 1.1% on executable size,
+# however do so is VERY MUCH discouraged.
+#DEBUG_ASSERTS=FALSE
+
+# Controlling GCC -pedantic flag
+#DEBUG_PEDANTIC=TRUE
+
+# compiler.h overrides, these disable various compiler
+# related features even if the compiler normally supports them
+
+# Disable use of long long for uint64
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_LONGLONG
+
+# Disable use of doubles
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_DOUBLE
+
+# Disable inlining of functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_INLINE
+
+# Disable use of const
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_CONST
+
+# Disable use of static functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_STATIC
+
+# Disable RPC flexible (long) bitmaps.
+# Warning: Disabling this changes the RPC version to 2 and
+# makes systems running this code incompatible with systems
+# running previous versions of BCM RPC code.
+#CFGFLAGS += -DBCM_RPC_PBMP_64
+
+#
+# Define if longs are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+#CFGFLAGS += -DLONGS_ARE_64BITS
+
+#
+# Define if pointers are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+# NOTE: This support works ONLY under conditions where the
+# upper 32 bits for ALL pointers are ZERO.
+#CFGFLAGS += -DPTRS_ARE_64BITS
+
+
+################################################################
+#
+# Boot and Debug Related Options
+#
+################################################################
+
+# Define this to add debug code for RX pool buffer tracking
+#CFGFLAGS += -DBCM_RXP_DEBUG
+
+# Allow debugging of PCI reads/writes (debug +pci)
+#CFGFLAGS += -DSOC_PCI_DEBUG
+
+# Make default debugging settings be 0 (very very quiet)
+#CFGFLAGS += -DNO_DEBUG_OUTPUT_DEFAULT
+
+# Don't use vxMemProbe
+#CFGFLAGS += -DVX_NO_MEM_PROBE
+
+# Allow debugging of Memory Allocation/Deallocation logging
+#CFGFLAGS += -DMEMLOG_SUPPORT
+
+################################################################
+################################################################
+#
+# Operational and Policy Options
+#
+################################################################
+
+# VLAN policy control:
+#	NO_DEFAULT_ETHER	do not init ether ports into vlan 1
+#	NO_DEFAULT_CPU		do not init cpu ports into vlan 1
+#	NO_DEFAULT_SPI_SUBPORT	do not init spi subports into vlan 1
+#	NO_AUTO_STACK		do not init stack/HG ports into created vlans
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_ETHER
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_CPU
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_SPI_SUBPORT
+#CFGFLAGS += -DBCM_VLAN_NO_AUTO_STACK
+
+# VLAN multicast flood Policy Control:
+# BCM_VLAN_MCAST_FLOOD_ALL      Flood all multicast packets to the VLAN
+# BCM_VLAN_MCAST_FLOOD_UNKNOWN  Flood unknown multicast packets to the vlan
+# BCM_VLAN_MCAST_FLOOD_NONE     Forward multicast packets with known
+#                               destination addresses to the appropriate ports.
+#                               All packets destined to an unknown multicast
+#                               address are dropped.
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_ALL
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_UNKNOWN
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_NONE
+
+#Port Enable/Disable Policy control:
+#       PORT_DEFAULT_DISABLE       disable ports during switch initialization
+#CFGFLAGS += -DBCM_PORT_DEFAULT_DISABLE
+
+# sal thread priority override (this value used for all threads if defined)
+#CFGFLAGS += -DSAL_THREAD_PRIORITY=255
+
+# disable printing of thread name in messages
+#CFGFLAGS += -DSAL_THREAD_NAME_PRINT_DISABLE
+
+# disable runtime reading of flash config.bcm file (even if !NO_FILEIO)
+#CFGFLAGS += -DSAL_CONFIG_FILE_DISABLE
+
+# disable all Application SAL dependencies
+#NO_SAL_APPL=1
+
+
+# Prevent scheduling in SPL locks when interrupt code is run as a thread.
+# This option should not be necessary if all locks are implemented correctly,
+# however, some locks may still rely on the assumption that scheduling does
+# not occur when interrupts are disabled. If you experience any locking
+# problems in e.g. Linux User Mode, try enabling this option.
+# Please note that turning on this option will reduce performance by an
+# estimated 5 to 10 %.
+#CFGFLAGS += -DSAL_SPL_NO_PREEMPT
+
+# disable mapping of higig cosq when mapping priority to cosq
+# (use identity mapping instead : map prio0->cos0, prio1->cos1, ... , prio7->cos7)
+#CFGFLAGS += -DBCM_COSQ_HIGIG_MAP_DISABLE
+
+# Enable ukernel debugging module
+#CFGFLAGS += -DSOC_UKERNEL_DEBUG
+
+
+################################################################
+#
+# System Management and Multiple CPU Options
+#
+################################################################
+
+# Turn on BCMX inclusion
+#     INCLUDE_BCMX for any support
+INCLUDE_BCMX=1
+
+# Telekinesis suite applications for CPU to CPU communication and discovery
+#     CPUDB:         Simple CPU data base manager
+#     CPUTRANS:      CPU to CPU communication mechanisms
+#     DISCOVER:      Simple discovery; will also include CPUTRANS
+#     STKTASK:       Stack manager application
+#
+#CFGFLAGS += -DINCLUDE_LIB_CPUDB
+#CFGFLAGS += -DINCLUDE_LIB_CPUTRANS
+#CFGFLAGS += -DINCLUDE_LIB_DISCOVER
+#CFGFLAGS += -DINCLUDE_LIB_STKTASK
+
+# Option for discovery to use the application-data field in routing
+# packets for Board-ID and CPU base flag information.
+#CFGFLAGS += -DDISCOVER_APP_DATA_BOARDID
+
+# Optionally override list of included dispatch modules
+# Note: including RPC automatically includes the Telekinesis suite libs
+# ESW is the enterprise platforms.
+# ROBO includes the managed devices.
+# SBX includes API support for bcm988020QSK24X2
+#DISPATCH_LIST = RPC ESW ASYNC SBX
+
+# Define to have end-to-end flow control enabled on boards that
+# support it
+#CFGFLAGS += -DBCM_BOARD_AUTO_E2E
+
+# Define the following to support per-CPU transmit pointers.
+# This allows the TX setup and send functions to be defined on a
+# per-CPU basis, allowing mixed in-band and out-of-band communication.
+#CFGFLAGS += -DBCM_C2C_TRANSPORT_SWITCHING
+
+# Options for feature list (INCLUDE_XXX)
+# If FEATURE_LIST is defined, it is a list of features to include.
+# See Make.config for the default feature list.
+#
+# Avaliable features:
+#
+#     BCMX
+#     BCMX_DIAG
+#     CHASSIS
+#     CUSTOMER
+#     DRIVERS
+#     EDITLINE
+#     I2C
+#     L3
+#     MEM_SCAN
+#     ATPTRANS_SOCKET
+#     TELNET
+#     TEST
+#     ACL
+#     RCPU
+#     KNET - Linux user mode kernel network support
+#     BCM_SAL_PROFILE - make available an API to track SAL usage.
+#     CINT - Include the C Interpreter in the diagnostic shell. 
+#            Please note this cannot be used in Linux kernel mode. 
+#     C_UNIT - Include the C unit testing framework.  If CINT is also included
+#              then hooks will be provided for use from it.
+#     PHY_SYM_DBG - PHY GUI MDIO read/write support. Socket interface
+#                   to PHY GUI for Symbolic debugging.
+#     APIMODE - call SDK API functions from shell, requires CINT
+#     DUNE_UI - dune legacy user interface. For debug only. Tested
+#               on linux-user-gto-2.6 only.
+#     KBP   -   include nlm2(11K)/nlm3(12K) KBP support
+#     BHH   -   Include Support for BHH Application (MPLS-TP OAM based on Y.1731) 
+#               using BTE on select devices.
+#     AVS   - Include AVS support
+#FEATURE_LIST=ATPTRANS_SOCKET BCMX_DIAG L3 I2C BCMX MEM_SCAN EDITLINE \
+#    CUSTOMER TELNET DRIVERS CHASSIS TEST ACL RCPU BCM_SAL_PROFILE CINT \
+#    PTP CES FCMAP BOARD KNET REGEX MACSEC APIMODE BFD KBP AVS
+
+#FEATURE_LIST= ATPTRANS_SOCKET PTP CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE BCM_SAL_PROFILE CUSTOMER TEST CHASSIS MSTP RCPU  
+
+# ARAD + KT2
+FEATURE_LIST= ATPTRANS_SOCKET PTP CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE BCM_SAL_PROFILE CUSTOMER TEST CHASSIS MSTP RCPU   INTR BSAFE TELNET DRIVERS DUNE_UI 
+#
+###############################################################
+#              KBP supported devices
+#
+#Enable this for 11K device support
+#KBP_DEVICE = KBP_11K
+#
+#Enable this for 12K device support
+#KBP_DEVICE = KBP_ALG
+#
+###############################################################
+
+################################################################
+#
+# Selective Device Support (Switches and PHYs)
+#
+################################################################
+
+# Multiple Chip Support
+#
+# By default, the driver supports all Strata switch and fabric chips
+# included in this software release.  It checks device IDs at runtime
+# to run the correct driver modules.
+#
+# To save space, the driver can be compiled to support just a subset of
+# the chips.  To do this, uncomment the line for BCM_PTL_SPT (partial
+# support) and uncomment one line for each chip to support.
+#
+# Note that there are a lot more chips than drivers.
+# For example, the BCM5615 driver is also used for BCM5625 and BCM5645.
+#
+
+BCM_PTL_SPT = 1
+
+#BCM_5675_A0 = 1
+#BCM_56102_A0 = 1
+#BCM_56112_A0 = 1
+#BCM_56304_B0 = 1
+#BCM_56314_A0 = 1
+#BCM_56504_A0 = 1
+#BCM_56504_B0 = 1
+#BCM_56514_A0 = 1
+#BCM_56624_A0 = 1
+#BCM_56624_B0 = 1
+#BCM_56680_A0 = 1
+#BCM_56680_B0 = 1
+#BCM_56580_A0 = 1
+#BCM_56700_A0 = 1
+#BCM_56800_A0 = 1
+#BCM_56218_A0 = 1
+#BCM_56224_A0 = 1
+#BCM_56224_B0 = 1
+#BCM_56725_A0 = 1
+#BCM_56820_A0 = 1
+#BCM_53314_A0 = 1
+#BCM_53324_A0 = 1
+#BCM_56634_A0 = 1
+#BCM_56634_B0 = 1
+#BCM_56524_A0 = 1
+#BCM_56524_B0 = 1
+#BCM_56685_A0 = 1
+#BCM_56685_B0 = 1
+#BCM_56334_A0 = 1
+#BCM_56334_B0 = 1
+#BCM_56840_A0 = 1
+#BCM_56840_B0 = 1
+#BCM_56850_A0 = 1
+#BCM_56142_A0 = 1
+#BCM_56150_A0 = 1
+#BCM_56836_A0 = 1
+#BCM_56640_A0 = 1
+BCM_56440_A0 = 1
+BCM_56440_B0 = 1
+BCM_56450_A0 = 1
+BCM_56450_B0 = 1
+BCM_56450_B1 = 1
+#BCM_56960_A0 = 1
+#BCM_56860_A0 = 1
+
+#BCM_5338_A0 = 1
+#BCM_5380_A0 = 1
+#BCM_5338_B0 = 1
+#BCM_5325_A1 = 1
+
+#BCM_5324_A0 = 1
+#BCM_5396_A0 = 1
+#BCM_5389_A0 = 1
+#BCM_5398_A0 = 1
+#BCM_5324_A1 = 1
+#BCM_53115_A0 = 1
+#BCM_53118_A0 = 1
+#BCM_53280_A0 = 1
+#BCM_53280_B0 = 1
+#BCM_53101_A0 = 1
+#BCM_53125_A0 = 1
+#BCM_53128_A0 = 1
+#BCM_53600_A0 = 1
+#BCM_89500_A0 = 1
+
+#BCM_88030_A0 = 1
+#BCM_QE2000_A0 = 1
+#BCM_BME3200_B0 = 1
+#BCM_BM9600_A0 = 1
+#BCM_88230_A0 = 1
+#BCM_88230_B0 = 1
+#BCM_88230_C0 = 1
+
+# ARAD
+BCM_88640_A0=1
+BCM_88650_A0=1
+BCM_88650_B0=1
+BCM_88660_A0=1
+
+#BCM_TK371X_A0 = 1
+
+# Options for multiple PHY support
+# If BCM_PHY_LIST is defined, it is a list of PHYs to include.
+# The default is to include all of them.
+# If none of them should be included specify BCM_PHY_LIST=EMPTY
+#BCM_PHY_LIST=522X 54XX 5464 5421S 5482 54616 54680 54680E 52681E 54880E 54682 54684 54640 54640E 54880 SERDES SIMUL 8703 8705 8706 8072 8040 8481 8750 8729 84740 84756 84328 EMPTY
+
+# Options for BCM5338 5380
+#CFGFLAGS += -DROBO_OLD
+#ROBO_OLD = 1
+
+# Support for phy simulation
+#CFGFLAGS += -DINCLUDE_PHY_SIMUL
+#CFGFLAGS += -DSIM_ALL_PHYS        # All phys use simulation driver
+#CFGFLAGS += -DSIM_CMIC_LINK_STAT  # Get link status from CMIC register
+
+# Support for BOARD library
+# if BOARD_LIST is defined, it is a list of Board drivers to include.
+# The default is to include all board drivers appropriate for the devices
+# included in the build. If none of them should be included specify
+# BOARD_LIST=EMPTY.
+#BOARD_LIST=GENERIC
+
+# Support for event logging
+#CFGFLAGS += -DINCLUDE_SHARED_EVLOG
+
+# Support for BCM API port translation
+#CFGFLAGS += -DINCLUDE_BCM_API_XLATE_PORT
+
+# Support for callback error checks and abort in traverse api's
+#CFGFLAGS += -DBCM_CB_ABORT_ON_ERR
+################################################################
+#
+# Misc Options
+#
+################################################################
+#CFGFLAGS += -DSOC_MEM_L3_DEFIP_WAR
+
+# Compile out Register/Table descriptive strings to generate a
+# compact image
+#CFGFLAGS +=-DSOC_NO_NAMES
+#CFGFLAGS +=-DSOC_NO_ALIAS
+#CFGFLAGS +=-DSOC_NO_DESC
+
+# Reload/WarmBoot Support
+#
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+#
+# Need this for validation using SOC scripts; Will move to tcl 
+# someday
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+#
+# Adds a CRC check on scache buffer: Calculate when saving,
+# and verify when loading.
+# When doing ISSU, both source and destination versions should either have
+# this flag enabled or disabled.
+#CFGFLAGS += -DSCACHE_CRC_CHECK
+
+################################################################
+#
+# Enable Easy Reload Support
+#
+################################################################
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT
+# For validation purposes
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT_SW_DUMP
+
+# Software Trunk failover Support
+#
+#CFGFLAGS += -DBCM_TRUNK_FAILOVER_SUPPORT
+
+################################################################
+#
+# Override default VXWORKS thread options to make set 
+# VX_UNBREAKABLE flag in task creation.
+#
+################################################################
+#CFGFLAGS += -DVX_THREAD_OPT_UNBREAKABLE
+
+
+################################################################
+#
+# Use default priority for BDE interrupt thread.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_THREAD_PRIO_DEFAULT
+
+################################################################
+#
+# Use cached DMA memory when mapping kernel DMA memory to user
+# mode. Should only be enabled on cache-coherent platforms.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_CACHE_DMA_MEM
+
+################################################################
+#
+# Take the spl lock upon entering an ISR
+#
+################################################################
+#CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ
+
+################################################################
+#
+# Silently ignore NULL pointer free in sal_free API
+# Default behaviour is to assert if a NULL pointer is passed to sal_free
+#
+################################################################
+#CFGFLAGS += -DSAL_FREE_NULL_IGNORE
+
+################################################################
+# Enable SBX MPLS TP support
+################################################################
+#CFGFLAGS += -DBCM_SBX_MPLSTP_SUPPORT
+#CFGFLAGS += -DBCM_SBX_C1_MPLSTP_SUPPORT
+
+################################################################
+# Restrict SBX C2 Fte range to C2's range
+################################################################
+#CFGFLAGS += -DBCM_SBX_C1_C2_INTEROP
+
+################################################################
+# For historical reasons the PCI probe function skips device 12
+# by default to prevent a system hang on certain platforms.
+# Set this value to zero to probe all PCI devices.
+################################################################
+#CFGFLAGS += -DOVERRIDE_PCI_SKIP_DEV_MASK=0
+
+################################################################
+# Override max devices supported by PLI BDE
+################################################################
+#CFGFLAGS += -DPLI_MAX_DEVICES
+
+################################################################
+# Track BCM API calls to avoid deinitialization while calls active
+# This will incur a small time penalty for each BCM API call
+################################################################
+#CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+
+################################################################
+# Override default retry time for detach to wait for executing
+# APIs to complete.
+################################################################
+#CFGFLAGS += -DBCM_DETACH_POLL_INTERVAL_USECS_DEFAULT=100000
+#CFGFLAGS += -DBCM_DETACH_NUM_RETRIES_DEFAULT=3000
+
+################################################################
+# Disable the RX module initialization
+################################################################
+#CFGFLAGS += -DBCM_RX_DISABLE
+
+################################################################
+# Enable TX callback in interrupt thread
+################################################################
+#CFGFLAGS += -DTX_CB_INTR
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.arad b/bal_release/3rdparty/bcm-sdk/make/Make.local.arad
new file mode 100755
index 0000000..67c11f5
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.arad
@@ -0,0 +1,565 @@
+# $Id: Make.local.template,v 1.181 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Usage for Make.local.template and Make.local:
+#
+# Make.local.template is checked into the tree, but Make.local is never
+# checked in.  Copy Make.local.template to Make.local, then change
+# Make.local to select the desired compilation options (mostly debugging
+# features).
+#
+# Note on CFGFLAGS usage:
+#
+#   Because CFGFLAGS may be used with other source preprocessing tools,
+#   please limit the values added to CFGFLAGS to -D defines.
+#
+#
+# Table of Contents:
+#
+#     Compiler Related Options
+#     Boot and Debug Related Options
+#     Operational and Policy Options
+#     System Management and Multiple CPU Options
+#     Selective Device Support (Switches and PHYs)
+#     Miscellaneous Options
+#
+
+################################################################
+#
+# Compiler Related Options
+#
+################################################################
+
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#DEBUG_IFDEFS=FALSE
+
+# SAL resource usage tracking #ifdef control
+# DEBUG_IFDEFS should also be  TRUE for this switch to take effect.
+#BCM_RESOURCE_USAGE_PROFILE_IFDEFS=TRUE
+
+# Uncomment to build without debug symbols
+#DEBUG_SYMBOLS=FALSE
+
+# Uncomment to add private CFLAGS
+#DEBUG_CFLAGS=
+
+# Uncomment to turn off the optimizer when debugging (recommended)
+#DEBUG_OPTIMIZE=FALSE
+
+# Compiling out assert() saves about 1.1% on executable size,
+# however do so is VERY MUCH discouraged.
+#DEBUG_ASSERTS=FALSE
+
+# Controlling GCC -pedantic flag
+#DEBUG_PEDANTIC=TRUE
+
+# compiler.h overrides, these disable various compiler
+# related features even if the compiler normally supports them
+
+# Disable use of long long for uint64
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_LONGLONG
+
+# Disable use of doubles
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_DOUBLE
+
+# Disable inlining of functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_INLINE
+
+# Disable use of const
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_CONST
+
+# Disable use of static functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_STATIC
+
+# Disable RPC flexible (long) bitmaps.
+# Warning: Disabling this changes the RPC version to 2 and
+# makes systems running this code incompatible with systems
+# running previous versions of BCM RPC code.
+#CFGFLAGS += -DBCM_RPC_PBMP_64
+
+#
+# Define if longs are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+#CFGFLAGS += -DLONGS_ARE_64BITS
+
+#
+# Define if pointers are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+# NOTE: This support works ONLY under conditions where the
+# upper 32 bits for ALL pointers are ZERO.
+#CFGFLAGS += -DPTRS_ARE_64BITS
+
+
+################################################################
+#
+# Boot and Debug Related Options
+#
+################################################################
+
+# Define this to add debug code for RX pool buffer tracking
+#CFGFLAGS += -DBCM_RXP_DEBUG
+
+# Allow debugging of PCI reads/writes (debug +pci)
+#CFGFLAGS += -DSOC_PCI_DEBUG
+
+# Make default debugging settings be 0 (very very quiet)
+#CFGFLAGS += -DNO_DEBUG_OUTPUT_DEFAULT
+
+# Don't use vxMemProbe
+#CFGFLAGS += -DVX_NO_MEM_PROBE
+
+# Allow debugging of Memory Allocation/Deallocation logging
+#CFGFLAGS += -DMEMLOG_SUPPORT
+
+################################################################
+################################################################
+#
+# Operational and Policy Options
+#
+################################################################
+
+# VLAN policy control:
+#	NO_DEFAULT_ETHER	do not init ether ports into vlan 1
+#	NO_DEFAULT_CPU		do not init cpu ports into vlan 1
+#	NO_DEFAULT_SPI_SUBPORT	do not init spi subports into vlan 1
+#	NO_AUTO_STACK		do not init stack/HG ports into created vlans
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_ETHER
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_CPU
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_SPI_SUBPORT
+#CFGFLAGS += -DBCM_VLAN_NO_AUTO_STACK
+
+# VLAN multicast flood Policy Control:
+# BCM_VLAN_MCAST_FLOOD_ALL      Flood all multicast packets to the VLAN
+# BCM_VLAN_MCAST_FLOOD_UNKNOWN  Flood unknown multicast packets to the vlan
+# BCM_VLAN_MCAST_FLOOD_NONE     Forward multicast packets with known
+#                               destination addresses to the appropriate ports.
+#                               All packets destined to an unknown multicast
+#                               address are dropped.
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_ALL
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_UNKNOWN
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_NONE
+
+#Port Enable/Disable Policy control:
+#       PORT_DEFAULT_DISABLE       disable ports during switch initialization
+#CFGFLAGS += -DBCM_PORT_DEFAULT_DISABLE
+
+# sal thread priority override (this value used for all threads if defined)
+#CFGFLAGS += -DSAL_THREAD_PRIORITY=255
+
+# disable printing of thread name in messages
+#CFGFLAGS += -DSAL_THREAD_NAME_PRINT_DISABLE
+
+# disable runtime reading of flash config.bcm file (even if !NO_FILEIO)
+#CFGFLAGS += -DSAL_CONFIG_FILE_DISABLE
+
+# disable all Application SAL dependencies
+#NO_SAL_APPL=1
+
+
+# Prevent scheduling in SPL locks when interrupt code is run as a thread.
+# This option should not be necessary if all locks are implemented correctly,
+# however, some locks may still rely on the assumption that scheduling does
+# not occur when interrupts are disabled. If you experience any locking
+# problems in e.g. Linux User Mode, try enabling this option.
+# Please note that turning on this option will reduce performance by an
+# estimated 5 to 10 %.
+#CFGFLAGS += -DSAL_SPL_NO_PREEMPT
+
+# disable mapping of higig cosq when mapping priority to cosq
+# (use identity mapping instead : map prio0->cos0, prio1->cos1, ... , prio7->cos7)
+#CFGFLAGS += -DBCM_COSQ_HIGIG_MAP_DISABLE
+
+# Enable ukernel debugging module
+#CFGFLAGS += -DSOC_UKERNEL_DEBUG
+
+
+################################################################
+#
+# System Management and Multiple CPU Options
+#
+################################################################
+
+# Turn on BCMX inclusion
+#     INCLUDE_BCMX for any support
+#INCLUDE_BCMX=1
+
+# Telekinesis suite applications for CPU to CPU communication and discovery
+#     CPUDB:         Simple CPU data base manager
+#     CPUTRANS:      CPU to CPU communication mechanisms
+#     DISCOVER:      Simple discovery; will also include CPUTRANS
+#     STKTASK:       Stack manager application
+#
+#CFGFLAGS += -DINCLUDE_LIB_CPUDB
+#CFGFLAGS += -DINCLUDE_LIB_CPUTRANS
+#CFGFLAGS += -DINCLUDE_LIB_DISCOVER
+#CFGFLAGS += -DINCLUDE_LIB_STKTASK
+
+# Option for discovery to use the application-data field in routing
+# packets for Board-ID and CPU base flag information.
+#CFGFLAGS += -DDISCOVER_APP_DATA_BOARDID
+
+# Optionally override list of included dispatch modules
+# Note: including RPC automatically includes the Telekinesis suite libs
+# ESW is the enterprise platforms.
+# ROBO includes the managed devices.
+# SBX includes API support for bcm988020QSK24X2
+#DISPATCH_LIST = RPC ESW ASYNC SBX
+
+# Define to have end-to-end flow control enabled on boards that
+# support it
+#CFGFLAGS += -DBCM_BOARD_AUTO_E2E
+
+# Define the following to support per-CPU transmit pointers.
+# This allows the TX setup and send functions to be defined on a
+# per-CPU basis, allowing mixed in-band and out-of-band communication.
+#CFGFLAGS += -DBCM_C2C_TRANSPORT_SWITCHING
+
+# Options for feature list (INCLUDE_XXX)
+# If FEATURE_LIST is defined, it is a list of features to include.
+# See Make.config for the default feature list.
+#
+# Avaliable features:
+#
+#     BCMX
+#     BCMX_DIAG
+#     CHASSIS
+#     CUSTOMER
+#     DRIVERS
+#     EDITLINE
+#     I2C
+#     L3
+#     MEM_SCAN
+#     ATPTRANS_SOCKET
+#     TELNET
+#     TEST
+#     ACL
+#     RCPU
+#     KNET - Linux user mode kernel network support
+#     BCM_SAL_PROFILE - make available an API to track SAL usage.
+#     CINT - Include the C Interpreter in the diagnostic shell. 
+#            Please note this cannot be used in Linux kernel mode. 
+#     C_UNIT - Include the C unit testing framework.  If CINT is also included
+#              then hooks will be provided for use from it.
+#     PHY_SYM_DBG - PHY GUI MDIO read/write support. Socket interface
+#                   to PHY GUI for Symbolic debugging.
+#     APIMODE - call SDK API functions from shell, requires CINT
+#     DUNE_UI - dune legacy user interface. For debug only. Tested
+#               on linux-user-gto-2.6 only.
+#     KBP   -   include nlm2(11K)/nlm3(12K) KBP support
+#     BHH   -   Include Support for BHH Application (MPLS-TP OAM based on Y.1731) 
+#               using BTE on select devices.
+#     AVS   - Include AVS support
+#FEATURE_LIST=ATPTRANS_SOCKET BCMX_DIAG L3 I2C BCMX MEM_SCAN EDITLINE \
+#    CUSTOMER TELNET DRIVERS CHASSIS TEST ACL RCPU BCM_SAL_PROFILE CINT \
+#    PTP CES FCMAP BOARD KNET REGEX MACSEC APIMODE BFD KBP AVS
+
+FEATURE_LIST= INTR CINT BSAFE ATPTRANS_SOCKET L3 I2C MEM_SCAN EDITLINE TELNET DRIVERS CHASSIS TEST BCM_SAL_PROFILE RCPU DUNE_UI
+
+###############################################################
+#              KBP supported devices
+#
+#Enable this for 11K device support
+#KBP_DEVICE = KBP_11K
+#
+#Enable this for 12K device support
+#KBP_DEVICE = KBP_ALG
+#
+###############################################################
+
+################################################################
+#
+# Selective Device Support (Switches and PHYs)
+#
+################################################################
+
+# Multiple Chip Support
+#
+# By default, the driver supports all Strata switch and fabric chips
+# included in this software release.  It checks device IDs at runtime
+# to run the correct driver modules.
+#
+# To save space, the driver can be compiled to support just a subset of
+# the chips.  To do this, uncomment the line for BCM_PTL_SPT (partial
+# support) and uncomment one line for each chip to support.
+#
+# Note that there are a lot more chips than drivers.
+# For example, the BCM5615 driver is also used for BCM5625 and BCM5645.
+#
+
+BCM_PTL_SPT = 1
+
+#BCM_5675_A0 = 1
+#BCM_56102_A0 = 1
+#BCM_56112_A0 = 1
+#BCM_56304_B0 = 1
+#BCM_56314_A0 = 1
+#BCM_56504_A0 = 1
+#BCM_56504_B0 = 1
+#BCM_56514_A0 = 1
+#BCM_56624_A0 = 1
+#BCM_56624_B0 = 1
+#BCM_56680_A0 = 1
+#BCM_56680_B0 = 1
+#BCM_56580_A0 = 1
+#BCM_56700_A0 = 1
+#BCM_56800_A0 = 1
+#BCM_56218_A0 = 1
+#BCM_56224_A0 = 1
+#BCM_56224_B0 = 1
+#BCM_56725_A0 = 1
+#BCM_56820_A0 = 1
+#BCM_53314_A0 = 1
+#BCM_53324_A0 = 1
+#BCM_56634_A0 = 1
+#BCM_56634_B0 = 1
+#BCM_56524_A0 = 1
+#BCM_56524_B0 = 1
+#BCM_56685_A0 = 1
+#BCM_56685_B0 = 1
+#BCM_56334_A0 = 1
+#BCM_56334_B0 = 1
+#BCM_56840_A0 = 1
+#BCM_56840_B0 = 1
+#BCM_56850_A0 = 1
+#BCM_56142_A0 = 1
+#BCM_56150_A0 = 1
+#BCM_56836_A0 = 1
+#BCM_56640_A0 = 1
+#BCM_56440_A0 = 1
+#BCM_56440_B0 = 1
+#BCM_56450_A0 = 1
+#BCM_56960_A0 = 1
+#BCM_56860_A0 = 1
+
+#BCM_5338_A0 = 1
+#BCM_5380_A0 = 1
+#BCM_5338_B0 = 1
+#BCM_5325_A1 = 1
+
+#BCM_5324_A0 = 1
+#BCM_5396_A0 = 1
+#BCM_5389_A0 = 1
+#BCM_5398_A0 = 1
+#BCM_5324_A1 = 1
+#BCM_53115_A0 = 1
+#BCM_53118_A0 = 1
+#BCM_53280_A0 = 1
+#BCM_53280_B0 = 1
+#BCM_53101_A0 = 1
+#BCM_53125_A0 = 1
+#BCM_53128_A0 = 1
+#BCM_53600_A0 = 1
+#BCM_89500_A0 = 1
+
+#BCM_88030_A0 = 1
+#BCM_QE2000_A0 = 1
+#BCM_BME3200_B0 = 1
+#BCM_BM9600_A0 = 1
+#BCM_88230_A0 = 1
+#BCM_88230_B0 = 1
+#BCM_88230_C0 = 1
+BCM_88640_A0=1
+BCM_88650_A0=1
+BCM_88650_B0=1
+BCM_88660_A0=1
+
+#BCM_TK371X_A0 = 1
+
+# Options for multiple PHY support
+# If BCM_PHY_LIST is defined, it is a list of PHYs to include.
+# The default is to include all of them.
+# If none of them should be included specify BCM_PHY_LIST=EMPTY
+#BCM_PHY_LIST=522X 54XX 5464 5421S 5482 54616 54680 54680E 52681E 54880E 54682 54684 54640 54640E 54880 SERDES SIMUL 8703 8705 8706 8072 8040 8481 8750 8729 84740 84756 84328 EMPTY
+
+# Options for BCM5338 5380
+#CFGFLAGS += -DROBO_OLD
+#ROBO_OLD = 1
+
+# Support for phy simulation
+#CFGFLAGS += -DINCLUDE_PHY_SIMUL
+#CFGFLAGS += -DSIM_ALL_PHYS        # All phys use simulation driver
+#CFGFLAGS += -DSIM_CMIC_LINK_STAT  # Get link status from CMIC register
+
+# Support for BOARD library
+# if BOARD_LIST is defined, it is a list of Board drivers to include.
+# The default is to include all board drivers appropriate for the devices
+# included in the build. If none of them should be included specify
+# BOARD_LIST=EMPTY.
+#BOARD_LIST=GENERIC
+
+# Support for event logging
+#CFGFLAGS += -DINCLUDE_SHARED_EVLOG
+
+# Support for BCM API port translation
+#CFGFLAGS += -DINCLUDE_BCM_API_XLATE_PORT
+
+# Support for callback error checks and abort in traverse api's
+#CFGFLAGS += -DBCM_CB_ABORT_ON_ERR
+################################################################
+#
+# Misc Options
+#
+################################################################
+#CFGFLAGS += -DSOC_MEM_L3_DEFIP_WAR
+
+# Compile out Register/Table descriptive strings to generate a
+# compact image
+#CFGFLAGS +=-DSOC_NO_NAMES
+#CFGFLAGS +=-DSOC_NO_ALIAS
+#CFGFLAGS +=-DSOC_NO_DESC
+
+# Reload/WarmBoot Support
+#
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+#
+# Need this for validation using SOC scripts; Will move to tcl 
+# someday
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+#
+# Adds a CRC check on scache buffer: Calculate when saving,
+# and verify when loading.
+# When doing ISSU, both source and destination versions should either have
+# this flag enabled or disabled.
+#CFGFLAGS += -DSCACHE_CRC_CHECK
+
+################################################################
+#
+# Enable Easy Reload Support
+#
+################################################################
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT
+# For validation purposes
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT_SW_DUMP
+
+# Software Trunk failover Support
+#
+#CFGFLAGS += -DBCM_TRUNK_FAILOVER_SUPPORT
+
+################################################################
+#
+# Override default VXWORKS thread options to make set 
+# VX_UNBREAKABLE flag in task creation.
+#
+################################################################
+#CFGFLAGS += -DVX_THREAD_OPT_UNBREAKABLE
+
+
+################################################################
+#
+# Use default priority for BDE interrupt thread.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_THREAD_PRIO_DEFAULT
+
+################################################################
+#
+# Use cached DMA memory when mapping kernel DMA memory to user
+# mode. Should only be enabled on cache-coherent platforms.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_CACHE_DMA_MEM
+
+################################################################
+#
+# Take the spl lock upon entering an ISR
+#
+################################################################
+#CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ
+
+################################################################
+#
+# Silently ignore NULL pointer free in sal_free API
+# Default behaviour is to assert if a NULL pointer is passed to sal_free
+#
+################################################################
+#CFGFLAGS += -DSAL_FREE_NULL_IGNORE
+
+################################################################
+# Enable SBX MPLS TP support
+################################################################
+#CFGFLAGS += -DBCM_SBX_MPLSTP_SUPPORT
+#CFGFLAGS += -DBCM_SBX_C1_MPLSTP_SUPPORT
+
+################################################################
+# Restrict SBX C2 Fte range to C2's range
+################################################################
+#CFGFLAGS += -DBCM_SBX_C1_C2_INTEROP
+
+################################################################
+# For historical reasons the PCI probe function skips device 12
+# by default to prevent a system hang on certain platforms.
+# Set this value to zero to probe all PCI devices.
+################################################################
+#CFGFLAGS += -DOVERRIDE_PCI_SKIP_DEV_MASK=0
+
+################################################################
+# Override max devices supported by PLI BDE
+################################################################
+#CFGFLAGS += -DPLI_MAX_DEVICES
+
+################################################################
+# Track BCM API calls to avoid deinitialization while calls active
+# This will incur a small time penalty for each BCM API call
+################################################################
+#CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+
+################################################################
+# Override default retry time for detach to wait for executing
+# APIs to complete.
+################################################################
+#CFGFLAGS += -DBCM_DETACH_POLL_INTERVAL_USECS_DEFAULT=100000
+#CFGFLAGS += -DBCM_DETACH_NUM_RETRIES_DEFAULT=3000
+
+################################################################
+# Disable the RX module initialization
+################################################################
+#CFGFLAGS += -DBCM_RX_DISABLE
+
+################################################################
+# Enable TX callback in interrupt thread
+################################################################
+#CFGFLAGS += -DTX_CB_INTR
+
+override SBX_CHIPS=
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.kt2 b/bal_release/3rdparty/bcm-sdk/make/Make.local.kt2
new file mode 100755
index 0000000..d7876b1
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.kt2
@@ -0,0 +1,562 @@
+# $Id: Make.local.template,v 1.181 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Usage for Make.local.template and Make.local:
+#
+# Make.local.template is checked into the tree, but Make.local is never
+# checked in.  Copy Make.local.template to Make.local, then change
+# Make.local to select the desired compilation options (mostly debugging
+# features).
+#
+# Note on CFGFLAGS usage:
+#
+#   Because CFGFLAGS may be used with other source preprocessing tools,
+#   please limit the values added to CFGFLAGS to -D defines.
+#
+#
+# Table of Contents:
+#
+#     Compiler Related Options
+#     Boot and Debug Related Options
+#     Operational and Policy Options
+#     System Management and Multiple CPU Options
+#     Selective Device Support (Switches and PHYs)
+#     Miscellaneous Options
+#
+
+################################################################
+#
+# Compiler Related Options
+#
+################################################################
+
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#DEBUG_IFDEFS=FALSE
+
+# SAL resource usage tracking #ifdef control
+# DEBUG_IFDEFS should also be  TRUE for this switch to take effect.
+#BCM_RESOURCE_USAGE_PROFILE_IFDEFS=TRUE
+
+# Uncomment to build without debug symbols
+#DEBUG_SYMBOLS=FALSE
+
+# Uncomment to add private CFLAGS
+#DEBUG_CFLAGS=
+
+# Uncomment to turn off the optimizer when debugging (recommended)
+#DEBUG_OPTIMIZE=FALSE
+
+# Compiling out assert() saves about 1.1% on executable size,
+# however do so is VERY MUCH discouraged.
+#DEBUG_ASSERTS=FALSE
+
+# Controlling GCC -pedantic flag
+#DEBUG_PEDANTIC=TRUE
+
+# compiler.h overrides, these disable various compiler
+# related features even if the compiler normally supports them
+
+# Disable use of long long for uint64
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_LONGLONG
+
+# Disable use of doubles
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_DOUBLE
+
+# Disable inlining of functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_INLINE
+
+# Disable use of const
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_CONST
+
+# Disable use of static functions
+#CFGFLAGS += -DCOMPILER_OVERRIDE_NO_STATIC
+
+# Disable RPC flexible (long) bitmaps.
+# Warning: Disabling this changes the RPC version to 2 and
+# makes systems running this code incompatible with systems
+# running previous versions of BCM RPC code.
+#CFGFLAGS += -DBCM_RPC_PBMP_64
+
+#
+# Define if longs are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+#CFGFLAGS += -DLONGS_ARE_64BITS
+
+#
+# Define if pointers are 64 bits on your compiler;
+# this is typically true ONLY for 64-bit processors.
+# NOTE: This support works ONLY under conditions where the
+# upper 32 bits for ALL pointers are ZERO.
+#CFGFLAGS += -DPTRS_ARE_64BITS
+
+
+################################################################
+#
+# Boot and Debug Related Options
+#
+################################################################
+
+# Define this to add debug code for RX pool buffer tracking
+#CFGFLAGS += -DBCM_RXP_DEBUG
+
+# Allow debugging of PCI reads/writes (debug +pci)
+#CFGFLAGS += -DSOC_PCI_DEBUG
+
+# Make default debugging settings be 0 (very very quiet)
+#CFGFLAGS += -DNO_DEBUG_OUTPUT_DEFAULT
+
+# Don't use vxMemProbe
+#CFGFLAGS += -DVX_NO_MEM_PROBE
+
+# Allow debugging of Memory Allocation/Deallocation logging
+#CFGFLAGS += -DMEMLOG_SUPPORT
+
+################################################################
+################################################################
+#
+# Operational and Policy Options
+#
+################################################################
+
+# VLAN policy control:
+#	NO_DEFAULT_ETHER	do not init ether ports into vlan 1
+#	NO_DEFAULT_CPU		do not init cpu ports into vlan 1
+#	NO_DEFAULT_SPI_SUBPORT	do not init spi subports into vlan 1
+#	NO_AUTO_STACK		do not init stack/HG ports into created vlans
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_ETHER
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_CPU
+#CFGFLAGS += -DBCM_VLAN_NO_DEFAULT_SPI_SUBPORT
+#CFGFLAGS += -DBCM_VLAN_NO_AUTO_STACK
+
+# VLAN multicast flood Policy Control:
+# BCM_VLAN_MCAST_FLOOD_ALL      Flood all multicast packets to the VLAN
+# BCM_VLAN_MCAST_FLOOD_UNKNOWN  Flood unknown multicast packets to the vlan
+# BCM_VLAN_MCAST_FLOOD_NONE     Forward multicast packets with known
+#                               destination addresses to the appropriate ports.
+#                               All packets destined to an unknown multicast
+#                               address are dropped.
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_ALL
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_UNKNOWN
+#CFGFLAGS += -DBCM_MCAST_FLOOD_DEFAULT=BCM_VLAN_MCAST_FLOOD_NONE
+
+#Port Enable/Disable Policy control:
+#       PORT_DEFAULT_DISABLE       disable ports during switch initialization
+#CFGFLAGS += -DBCM_PORT_DEFAULT_DISABLE
+
+# sal thread priority override (this value used for all threads if defined)
+#CFGFLAGS += -DSAL_THREAD_PRIORITY=255
+
+# disable printing of thread name in messages
+#CFGFLAGS += -DSAL_THREAD_NAME_PRINT_DISABLE
+
+# disable runtime reading of flash config.bcm file (even if !NO_FILEIO)
+#CFGFLAGS += -DSAL_CONFIG_FILE_DISABLE
+
+# disable all Application SAL dependencies
+#NO_SAL_APPL=1
+
+
+# Prevent scheduling in SPL locks when interrupt code is run as a thread.
+# This option should not be necessary if all locks are implemented correctly,
+# however, some locks may still rely on the assumption that scheduling does
+# not occur when interrupts are disabled. If you experience any locking
+# problems in e.g. Linux User Mode, try enabling this option.
+# Please note that turning on this option will reduce performance by an
+# estimated 5 to 10 %.
+#CFGFLAGS += -DSAL_SPL_NO_PREEMPT
+
+# disable mapping of higig cosq when mapping priority to cosq
+# (use identity mapping instead : map prio0->cos0, prio1->cos1, ... , prio7->cos7)
+#CFGFLAGS += -DBCM_COSQ_HIGIG_MAP_DISABLE
+
+# Enable ukernel debugging module
+#CFGFLAGS += -DSOC_UKERNEL_DEBUG
+
+
+################################################################
+#
+# System Management and Multiple CPU Options
+#
+################################################################
+
+# Turn on BCMX inclusion
+#     INCLUDE_BCMX for any support
+INCLUDE_BCMX=1
+
+# Telekinesis suite applications for CPU to CPU communication and discovery
+#     CPUDB:         Simple CPU data base manager
+#     CPUTRANS:      CPU to CPU communication mechanisms
+#     DISCOVER:      Simple discovery; will also include CPUTRANS
+#     STKTASK:       Stack manager application
+#
+#CFGFLAGS += -DINCLUDE_LIB_CPUDB
+#CFGFLAGS += -DINCLUDE_LIB_CPUTRANS
+#CFGFLAGS += -DINCLUDE_LIB_DISCOVER
+#CFGFLAGS += -DINCLUDE_LIB_STKTASK
+
+# Option for discovery to use the application-data field in routing
+# packets for Board-ID and CPU base flag information.
+#CFGFLAGS += -DDISCOVER_APP_DATA_BOARDID
+
+# Optionally override list of included dispatch modules
+# Note: including RPC automatically includes the Telekinesis suite libs
+# ESW is the enterprise platforms.
+# ROBO includes the managed devices.
+# SBX includes API support for bcm988020QSK24X2
+#DISPATCH_LIST = RPC ESW ASYNC SBX
+
+# Define to have end-to-end flow control enabled on boards that
+# support it
+#CFGFLAGS += -DBCM_BOARD_AUTO_E2E
+
+# Define the following to support per-CPU transmit pointers.
+# This allows the TX setup and send functions to be defined on a
+# per-CPU basis, allowing mixed in-band and out-of-band communication.
+#CFGFLAGS += -DBCM_C2C_TRANSPORT_SWITCHING
+
+# Options for feature list (INCLUDE_XXX)
+# If FEATURE_LIST is defined, it is a list of features to include.
+# See Make.config for the default feature list.
+#
+# Avaliable features:
+#
+#     BCMX
+#     BCMX_DIAG
+#     CHASSIS
+#     CUSTOMER
+#     DRIVERS
+#     EDITLINE
+#     I2C
+#     L3
+#     MEM_SCAN
+#     ATPTRANS_SOCKET
+#     TELNET
+#     TEST
+#     ACL
+#     RCPU
+#     KNET - Linux user mode kernel network support
+#     BCM_SAL_PROFILE - make available an API to track SAL usage.
+#     CINT - Include the C Interpreter in the diagnostic shell. 
+#            Please note this cannot be used in Linux kernel mode. 
+#     C_UNIT - Include the C unit testing framework.  If CINT is also included
+#              then hooks will be provided for use from it.
+#     PHY_SYM_DBG - PHY GUI MDIO read/write support. Socket interface
+#                   to PHY GUI for Symbolic debugging.
+#     APIMODE - call SDK API functions from shell, requires CINT
+#     DUNE_UI - dune legacy user interface. For debug only. Tested
+#               on linux-user-gto-2.6 only.
+#     KBP   -   include nlm2(11K)/nlm3(12K) KBP support
+#     BHH   -   Include Support for BHH Application (MPLS-TP OAM based on Y.1731) 
+#               using BTE on select devices.
+#     AVS   - Include AVS support
+#FEATURE_LIST=ATPTRANS_SOCKET BCMX_DIAG L3 I2C BCMX MEM_SCAN EDITLINE \
+#    CUSTOMER TELNET DRIVERS CHASSIS TEST ACL RCPU BCM_SAL_PROFILE CINT \
+#    PTP CES FCMAP BOARD KNET REGEX MACSEC APIMODE BFD KBP AVS
+
+FEATURE_LIST= ATPTRANS_SOCKET PTP CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE BCM_SAL_PROFILE CUSTOMER TEST CHASSIS MSTP RCPU
+
+###############################################################
+#              KBP supported devices
+#
+#Enable this for 11K device support
+#KBP_DEVICE = KBP_11K
+#
+#Enable this for 12K device support
+#KBP_DEVICE = KBP_ALG
+#
+###############################################################
+
+################################################################
+#
+# Selective Device Support (Switches and PHYs)
+#
+################################################################
+
+# Multiple Chip Support
+#
+# By default, the driver supports all Strata switch and fabric chips
+# included in this software release.  It checks device IDs at runtime
+# to run the correct driver modules.
+#
+# To save space, the driver can be compiled to support just a subset of
+# the chips.  To do this, uncomment the line for BCM_PTL_SPT (partial
+# support) and uncomment one line for each chip to support.
+#
+# Note that there are a lot more chips than drivers.
+# For example, the BCM5615 driver is also used for BCM5625 and BCM5645.
+#
+
+BCM_PTL_SPT = 1
+
+#BCM_5675_A0 = 1
+#BCM_56102_A0 = 1
+#BCM_56112_A0 = 1
+#BCM_56304_B0 = 1
+#BCM_56314_A0 = 1
+#BCM_56504_A0 = 1
+#BCM_56504_B0 = 1
+#BCM_56514_A0 = 1
+#BCM_56624_A0 = 1
+#BCM_56624_B0 = 1
+#BCM_56680_A0 = 1
+#BCM_56680_B0 = 1
+#BCM_56580_A0 = 1
+#BCM_56700_A0 = 1
+#BCM_56800_A0 = 1
+#BCM_56218_A0 = 1
+#BCM_56224_A0 = 1
+#BCM_56224_B0 = 1
+#BCM_56725_A0 = 1
+#BCM_56820_A0 = 1
+#BCM_53314_A0 = 1
+#BCM_53324_A0 = 1
+#BCM_56634_A0 = 1
+#BCM_56634_B0 = 1
+#BCM_56524_A0 = 1
+#BCM_56524_B0 = 1
+#BCM_56685_A0 = 1
+#BCM_56685_B0 = 1
+#BCM_56334_A0 = 1
+#BCM_56334_B0 = 1
+#BCM_56840_A0 = 1
+#BCM_56840_B0 = 1
+#BCM_56850_A0 = 1
+#BCM_56142_A0 = 1
+#BCM_56150_A0 = 1
+#BCM_56836_A0 = 1
+#BCM_56640_A0 = 1
+BCM_56440_A0 = 1
+BCM_56440_B0 = 1
+BCM_56450_A0 = 1
+BCM_56450_B0 = 1
+BCM_56450_B1 = 1
+#BCM_56960_A0 = 1
+#BCM_56860_A0 = 1
+
+#BCM_5338_A0 = 1
+#BCM_5380_A0 = 1
+#BCM_5338_B0 = 1
+#BCM_5325_A1 = 1
+
+#BCM_5324_A0 = 1
+#BCM_5396_A0 = 1
+#BCM_5389_A0 = 1
+#BCM_5398_A0 = 1
+#BCM_5324_A1 = 1
+#BCM_53115_A0 = 1
+#BCM_53118_A0 = 1
+#BCM_53280_A0 = 1
+#BCM_53280_B0 = 1
+#BCM_53101_A0 = 1
+#BCM_53125_A0 = 1
+#BCM_53128_A0 = 1
+#BCM_53600_A0 = 1
+#BCM_89500_A0 = 1
+
+#BCM_88030_A0 = 1
+#BCM_QE2000_A0 = 1
+#BCM_BME3200_B0 = 1
+#BCM_BM9600_A0 = 1
+#BCM_88230_A0 = 1
+#BCM_88230_B0 = 1
+#BCM_88230_C0 = 1
+
+#BCM_TK371X_A0 = 1
+
+# Options for multiple PHY support
+# If BCM_PHY_LIST is defined, it is a list of PHYs to include.
+# The default is to include all of them.
+# If none of them should be included specify BCM_PHY_LIST=EMPTY
+#BCM_PHY_LIST=522X 54XX 5464 5421S 5482 54616 54680 54680E 52681E 54880E 54682 54684 54640 54640E 54880 SERDES SIMUL 8703 8705 8706 8072 8040 8481 8750 8729 84740 84756 84328 EMPTY
+
+# Options for BCM5338 5380
+#CFGFLAGS += -DROBO_OLD
+#ROBO_OLD = 1
+
+# Support for phy simulation
+#CFGFLAGS += -DINCLUDE_PHY_SIMUL
+#CFGFLAGS += -DSIM_ALL_PHYS        # All phys use simulation driver
+#CFGFLAGS += -DSIM_CMIC_LINK_STAT  # Get link status from CMIC register
+
+# Support for BOARD library
+# if BOARD_LIST is defined, it is a list of Board drivers to include.
+# The default is to include all board drivers appropriate for the devices
+# included in the build. If none of them should be included specify
+# BOARD_LIST=EMPTY.
+#BOARD_LIST=GENERIC
+
+# Support for event logging
+#CFGFLAGS += -DINCLUDE_SHARED_EVLOG
+
+# Support for BCM API port translation
+#CFGFLAGS += -DINCLUDE_BCM_API_XLATE_PORT
+
+# Support for callback error checks and abort in traverse api's
+#CFGFLAGS += -DBCM_CB_ABORT_ON_ERR
+################################################################
+#
+# Misc Options
+#
+################################################################
+#CFGFLAGS += -DSOC_MEM_L3_DEFIP_WAR
+
+# Compile out Register/Table descriptive strings to generate a
+# compact image
+#CFGFLAGS +=-DSOC_NO_NAMES
+#CFGFLAGS +=-DSOC_NO_ALIAS
+#CFGFLAGS +=-DSOC_NO_DESC
+
+# Reload/WarmBoot Support
+#
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+#
+# Need this for validation using SOC scripts; Will move to tcl 
+# someday
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+#
+# Adds a CRC check on scache buffer: Calculate when saving,
+# and verify when loading.
+# When doing ISSU, both source and destination versions should either have
+# this flag enabled or disabled.
+#CFGFLAGS += -DSCACHE_CRC_CHECK
+
+################################################################
+#
+# Enable Easy Reload Support
+#
+################################################################
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT
+# For validation purposes
+#CFGFLAGS += -DBCM_EASY_RELOAD_SUPPORT_SW_DUMP
+
+# Software Trunk failover Support
+#
+#CFGFLAGS += -DBCM_TRUNK_FAILOVER_SUPPORT
+
+################################################################
+#
+# Override default VXWORKS thread options to make set 
+# VX_UNBREAKABLE flag in task creation.
+#
+################################################################
+#CFGFLAGS += -DVX_THREAD_OPT_UNBREAKABLE
+
+
+################################################################
+#
+# Use default priority for BDE interrupt thread.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_THREAD_PRIO_DEFAULT
+
+################################################################
+#
+# Use cached DMA memory when mapping kernel DMA memory to user
+# mode. Should only be enabled on cache-coherent platforms.
+#
+################################################################
+#CFGFLAGS += -DSAL_BDE_CACHE_DMA_MEM
+
+################################################################
+#
+# Take the spl lock upon entering an ISR
+#
+################################################################
+#CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ
+
+################################################################
+#
+# Silently ignore NULL pointer free in sal_free API
+# Default behaviour is to assert if a NULL pointer is passed to sal_free
+#
+################################################################
+#CFGFLAGS += -DSAL_FREE_NULL_IGNORE
+
+################################################################
+# Enable SBX MPLS TP support
+################################################################
+#CFGFLAGS += -DBCM_SBX_MPLSTP_SUPPORT
+#CFGFLAGS += -DBCM_SBX_C1_MPLSTP_SUPPORT
+
+################################################################
+# Restrict SBX C2 Fte range to C2's range
+################################################################
+#CFGFLAGS += -DBCM_SBX_C1_C2_INTEROP
+
+################################################################
+# For historical reasons the PCI probe function skips device 12
+# by default to prevent a system hang on certain platforms.
+# Set this value to zero to probe all PCI devices.
+################################################################
+#CFGFLAGS += -DOVERRIDE_PCI_SKIP_DEV_MASK=0
+
+################################################################
+# Override max devices supported by PLI BDE
+################################################################
+#CFGFLAGS += -DPLI_MAX_DEVICES
+
+################################################################
+# Track BCM API calls to avoid deinitialization while calls active
+# This will incur a small time penalty for each BCM API call
+################################################################
+#CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+
+################################################################
+# Override default retry time for detach to wait for executing
+# APIs to complete.
+################################################################
+#CFGFLAGS += -DBCM_DETACH_POLL_INTERVAL_USECS_DEFAULT=100000
+#CFGFLAGS += -DBCM_DETACH_NUM_RETRIES_DEFAULT=3000
+
+################################################################
+# Disable the RX module initialization
+################################################################
+#CFGFLAGS += -DBCM_RX_DISABLE
+
+################################################################
+# Enable TX callback in interrupt thread
+################################################################
+#CFGFLAGS += -DTX_CB_INTR
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.qax b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax
new file mode 100644
index 0000000..1a47e1b
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax
@@ -0,0 +1,28 @@
+FEATURE_LIST := CINT L3 I2C MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CHASSIS RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP 
+
+DEBUG_CFLAGS=-Wdeclaration-after-statement
+
+BCM_PTL_SPT=1
+
+ALL_DPP_CHIPS = 1
+ALL_DFE_CHIPS = 1
+
+# Includes XML library and enables use of "diag pp dump" utility for PP import/export facilities 
+DATAIO_SUPPORT = 1
+KERN_VER=3.7.10
+
+CFGFLAGS += -DSTATIC=static
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+CFGFLAGS += -DBCM_EASY_RELOAD_WB_COMPAT_SUPPORT
+CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+CFGFLAGS += -D__DUNE_LINUX_BCM_CPU_PCIE__
+CFGFLAGS += -DPHYS_ADDRS_ARE_64BITS -DSAL_BDE_32BIT_USER_64BIT_KERNEL
+CFGFLAGS += -D_SIMPLE_MEMORY_ALLOCATION_=0 -DUSE_LINUX_BDE_MMAP=1
+CFGFLAGS += -DSCACHE_CRC_CHECK
+
+CFGFLAGS += -DBROADCOM_SVK
+
+
+VENDOR_LIST=CUSTOMER78 BROADCOM DNX
+
diff --git a/bal_release/3rdparty/bcm-sdk/make/Make.local.qax_sim b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax_sim
new file mode 100644
index 0000000..9f2c402
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make/Make.local.qax_sim
@@ -0,0 +1,33 @@
+#FEATURE_LIST := CINT L3 I2C BCMX BCMX_DIAG MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CUSTOMER CHASSIS MSTP RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP KBP
+
+FEATURE_LIST := CINT L3 I2C MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CUSTOMER CHASSIS RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP 
+
+DEBUG_CFLAGS=-Wdeclaration-after-statement 
+
+BCM_PTL_SPT=1
+
+ALL_DPP_CHIPS = 1
+ALL_DFE_CHIPS = 1
+
+# Includes XML library and enables use of "diag pp dump" utility for PP import/export facilities 
+DATAIO_SUPPORT = 1
+KERN_VER=3.7.10
+
+CFGFLAGS += -DSTATIC=static
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
+CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
+CFGFLAGS += -DBCM_EASY_RELOAD_WB_COMPAT_SUPPORT
+CFGFLAGS += -DBCM_CONTROL_API_TRACKING
+CFGFLAGS += -D__DUNE_LINUX_BCM_CPU_PCIE__
+CFGFLAGS += -DPHYS_ADDRS_ARE_64BITS -DSAL_BDE_32BIT_USER_64BIT_KERNEL
+CFGFLAGS += -D_SIMPLE_MEMORY_ALLOCATION_=0 -DUSE_LINUX_BDE_MMAP=1
+CFGFLAGS += -DSCACHE_CRC_CHECK
+
+CFGFLAGS += -DBROADCOM_SVK
+
+CFGFLAGS += -Wno-format-security -Wno-unused-but-set-variable
+
+#KBP_DEVICE := KBP_ALG
+
+VENDOR_LIST=CUSTOMER78 BROADCOM DNX
+
diff --git a/bal_release/3rdparty/bcm-sdk/make_ing_dir.sh b/bal_release/3rdparty/bcm-sdk/make_ing_dir.sh
new file mode 100755
index 0000000..4f15b82
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/make_ing_dir.sh
@@ -0,0 +1,33 @@
+#!/bin/sh
+# this shell script build the ING SDK with BAL switch app as a thread
+# Eventually this script will be replaced by a make file
+#set -x
+echo "Preparing ING SDK ${ING_SDK} source tree in ${ING_SDK_DIR}"
+
+# making build directory
+rm -fr ${ING_SDK_DIR}
+mkdir -p ${ING_SDK_DIR}
+cd ${ING_SDK_DIR}/..
+
+#untar the sdk tgz file
+echo "Untaring ${ING_SDK}.tar.gz"
+tar zxf ${ING_SDK_TOP_DIR}/${ING_SDK}.tar.gz
+
+#patch sdk with bal modifications - DO NOT change the patch order
+echo "Patching SDK ${ING_SDK}.tar.gz with patch file ${ING_SDK_PATCH}"
+patch -p0 < ${ING_SDK_TOP_DIR}/${ING_SDK_PATCH}
+
+#link switch app .h and .c files
+echo "Link Switch App Source files"
+cd ${ING_SDK_DIR}
+mkdir -p make/
+
+if [ "${SWITCH}" = "qax" ];
+then
+    ln -s ${ING_SDK_TOP_DIR}/make/Make.local.qax    make/Make.local
+else
+    echo " SWITCH = ${SWITCH} is not specified or supported"
+    exit
+fi
+
+echo "Done"
diff --git a/bal_release/3rdparty/bcm-sdk/rc/arad/arad.soc b/bal_release/3rdparty/bcm-sdk/rc/arad/arad.soc
new file mode 100755
index 0000000..58ff029
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/arad/arad.soc
@@ -0,0 +1,156 @@
+#
+# $Id: arad.soc,v 1.90 Broadcom SDK $
+#
+# $Copyright: Copyright 2016 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+set RCError=off
+debug appl shell warn
+rcload /home/negev/bcm88650_dram_tune.soc
+debug appl shell =
+set RCError=on
+
+debug info
+debug appl rcload warn
+debug appl symtab warn
+debug bcm rx,tx,link,attach warn
+debug soc tests warn
+debug soc rx,phy,schan,reg,socmem,dma,mem,miim,mii,intr,counter,ddr warn
+debug soc common err
+debug sys verinet warn
+
+rcload arad_dram.soc
+
+# Set modid:
+# If diag_chassis is enabled (two line cards), and 'slot' is defined (slot is defined only when
+# working without a management card) - set modid to be 0 for slot 0, and 2 for slot 2
+# Otherwise (single line card, or management card), set modid to be 0 for unit 0, and 2 for unit 2
+# If module_id is set, then set modid to have module_id value
+if $?diag_chassis && $?slot "\
+  local modid $slot" \
+else "\
+  local modid $unit"
+expr $modid==1; if $? "local modid 2"
+
+if $?module_id " \
+  local modid $module_id"
+
+echo "$unit: modid=$modid"
+
+# Set base_modid:
+# Id base_module_id is set, then set base_modid to have base_module_id value.
+# Otherwise, set base_modid to be 0.
+if $?base_module_id " \
+  local base_modid $base_module_id" \
+else " \
+  local base_modid 0"
+
+expr $base_modid > 0
+if $? " \
+  echo '$unit: base_modid=$base_modid'"
+
+# Set nof_devices:
+# If diag_chassis is enabled (mgmt card) - set nof_devices to be 2.
+# Otherwise, set nof_devices to be 1.
+# If n_devices is set, then set nof_devices to have n_devices value.
+if $?diag_chassis " \
+  local nof_devices 2" \
+else "\
+  local nof_devices 1"
+
+if $?n_devices " \
+  local nof_devices $n_devices"
+
+expr $nof_devices > 1
+if $? " \
+  echo '$unit: nof_devices=$nof_devices'"
+
+if $?mng_cpu " \
+  echo '$unit:management card - polling is set on'; \
+  config add polled_irq_mode.BCM88650=1; \
+  config add schan_intr_enable.BCM88650=0; \
+  config add tdma_intr_enable.BCM88650=0; \
+  config add tslam_intr_enable.BCM88650=0; \
+  config add miim_intr_enable.BCM88650=0; \
+  config add polled_irq_mode.BCM88750=1; \
+  config add schan_intr_enable.BCM88750=0; \
+  config add tdma_intr_enable.BCM88750=0; \
+  config add tslam_intr_enable.BCM88750=0; \
+  config add miim_intr_enable.BCM88750=0; "
+
+#default values in a case which these parameters are not exist
+if !$?diag_cosq_disable "\
+  local diag_cosq_disable 0"
+if !$?warmboot "\
+  local warmboot 0"
+if !$?diag_disable "\
+  local diag_disable 0"
+if !$?diag_no_appl_stk "\
+  local diag_no_appl_stk 0"
+if !$?diag_no_itmh_prog_mode "\
+  local diag_no_itmh_prog_mode 0"
+if !$?l2_mode "\
+  local l2_mode 0"
+
+INIT_DNX ModID=$modid BaseModID=$base_modid NofDevices=$nof_devices CosqDisable=$diag_cosq_disable NoAppl=$diag_disable Warmboot=$warmboot NoApplStk=$diag_no_appl_stk NoItmhProgMode=$diag_no_itmh_prog_mode L2Mode=$l2_mode
+
+#LED support section start
+local ledcode '02 0D 67 31 67 1C 02 0E 67 31 67 1C 02 0F 67 31\
+ 67 1C 02 10 67 31 67 1C 86 E0 3A 08 67 37 75 3E\
+ 28 32 00 32 01 B7 97 75 3E 16 E0 CA 05 70 42 77\
+ 3E 67 37 75 3E 77 42 12 A0 F8 15 1A 00 57 32 0E\
+ 87 57 32 0F 87 57' #sdk88650.hex
+
+# Download LED code into LED processor and enable (if applicable).
+if $?feature_led_proc && $?ledcode && !$?simulator \
+    "led prog $ledcode; \
+     led auto on; led start"
+
+# If loading multiple rc.soc, upon loading the last unit, restart
+# all LED processors so any common blinking is in sync.
+# if !"expr $?feature_led_proc && !$?simulator && $unit == $units - 1" \
+#    "*:led stop; *:led start"
+#LED support section end
+
+echo "arad.soc: Done."
diff --git a/bal_release/3rdparty/bcm-sdk/rc/arad/arad_dram.soc b/bal_release/3rdparty/bcm-sdk/rc/arad/arad_dram.soc
new file mode 100755
index 0000000..f50e165
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/arad/arad_dram.soc
@@ -0,0 +1,242 @@
+#
+# $Id: arad_dram.soc,v 1.0 Broadcom SDK $
+#
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+
+if $?dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_800 "\
+  config add ext_ram_freq=800; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=21; \
+  config add ext_ram_t_rrd=7500; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=160000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=8; \
+  config add ext_ram_t_faw=40000; \
+  config add ext_ram_c_cas_latency=11; \
+  config add ddr3_mem_grade=0x111111"
+    
+if $?dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_933 "\
+  config add ext_ram_freq=933; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=25; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=160000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=9; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=13; \
+  config add ddr3_mem_grade=0x131313"
+   
+if $?dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066 "\
+  config add ext_ram_freq=1066; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=29; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=160000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=10; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=14; \
+  config add ddr3_mem_grade=0x141414"
+
+if $?dram_type_DDR3_MICRON_MT41J256M16_4GBIT_1066 "\
+  config add ext_ram_freq=1066; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=29; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=46130; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=260000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=10; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=14; \
+  config add ddr3_mem_grade=0x141414"
+  
+if $?dram_type_DDR3_MICRON_MT42J64M16LA_15E_667 "\
+  config add ext_ram_freq=667; \
+  config add ext_ram_rows=8192; \
+  config add ext_ram_jedec=21; \
+  config add ext_ram_t_rrd=7500; \
+  config add ext_ram_t_rc=49500; \
+  config add ext_ram_t_rcd_rd=13500; \
+  config add ext_ram_t_rcd_wr=13500; \
+  config add ext_ram_t_rp=13500; \
+  config add ext_ram_t_rfc=110000; \
+  config add ext_ram_t_ras=36000; \
+  config add ext_ram_c_wr_latency=7; \
+  config add ext_ram_t_faw=45000; \
+  config add ext_ram_c_cas_latency=9; \
+  config add ddr3_mem_grade=0x090909"
+
+if $?dram_type_DDR3_MICRON_MT41J128M16HA_125_800 "\
+  config add ext_ram_freq=800; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=21; \
+  config add ext_ram_t_rrd=7500; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=160000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=8; \
+  config add ext_ram_t_faw=40000; \
+  config add ext_ram_c_cas_latency=11; \
+  config add ddr3_mem_grade=0x111111"
+  
+if $?dram_type_DDR3_MICRON_MT41J128M16HA_125_933 "\
+  config add ext_ram_freq=933; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=25; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=160000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=9; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=13; \
+  config add ddr3_mem_grade=0x131313"
+  
+if $?dram_type_DDR3_MICRON_MT41J128M16HA_125_1066 "\
+  config add ext_ram_freq=1066; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=29; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=160000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=10; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=14; \
+  config add ddr3_mem_grade=0x141414"
+  
+if $?dram_type_DDR3_SAMSUNG_K4B4G1646B_4GBIT_1066 "\
+  config add ext_ram_freq=1066; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_jedec=29; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=46090; \
+  config add ext_ram_t_rcd_rd=13090; \
+  config add ext_ram_t_rcd_wr=13090; \
+  config add ext_ram_t_rp=13090; \
+  config add ext_ram_t_rfc=260000; \
+  config add ext_ram_t_ras=33000; \
+  config add ext_ram_c_wr_latency=10; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=14; \
+  config add ddr3_mem_grade=0x141414"
+  
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646G_800 "\
+  config add ext_ram_freq=800; \
+  config add ext_ram_rows=8192; \
+  config add ext_ram_jedec=25; \
+  config add ext_ram_t_rrd=7500; \
+  config add ext_ram_t_rc=47910; \
+  config add ext_ram_t_rcd_rd=13910; \
+  config add ext_ram_t_rcd_wr=13910; \
+  config add ext_ram_t_rp=13910; \
+  config add ext_ram_t_rfc=110000; \
+  config add ext_ram_t_ras=34000; \
+  config add ext_ram_c_wr_latency=8; \
+  config add ext_ram_t_faw=40000; \
+  config add ext_ram_c_cas_latency=11; \
+  config add ddr3_mem_grade=0x111111"
+  
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646G_933 "\
+  config add ext_ram_freq=933; \
+  config add ext_ram_rows=8192; \
+  config add ext_ram_jedec=25; \
+  config add ext_ram_t_rrd=6000; \
+  config add ext_ram_t_rc=47910; \
+  config add ext_ram_t_rcd_rd=13910; \
+  config add ext_ram_t_rcd_wr=13910; \
+  config add ext_ram_t_rp=13910; \
+  config add ext_ram_t_rfc=110000; \
+  config add ext_ram_t_ras=34000; \
+  config add ext_ram_c_wr_latency=9; \
+  config add ext_ram_t_faw=35000; \
+  config add ext_ram_c_cas_latency=13; \
+  config add ddr3_mem_grade=0x131313"
+  
+if $?dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_800 || \
+   $?dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_933 || \
+   $?dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066 || \
+   $?dram_type_DDR3_MICRON_MT41J256M16_4GBIT_1066 || \
+   $?dram_type_DDR3_MICRON_MT41J128M16HA_125_800 || \
+   $?dram_type_DDR3_MICRON_MT41J128M16HA_125_933 || \
+   $?dram_type_DDR3_MICRON_MT41J128M16HA_125_1066 || \
+   $?dram_type_DDR3_MICRON_MT42J64M16LA_15E_667 || \
+   $?dram_type_DDR3_SAMSUNG_K4B4G1646B_4GBIT_1066 || \
+   $?dram_type_DDR3_SAMSUNG_K4B1G1646G_933 || \
+   $?dram_type_DDR3_SAMSUNG_K4B1G1646G_800 "\
+  config add ext_ram_type=DDR3; \
+  config add ext_ram_columns=1024; \
+  config add ext_ram_banks=8; \
+  config add ext_ram_ap_bit_pos=10; \
+  config add ext_ram_burst_size=32; \
+  config add ext_ram_t_ref=3900000; \
+  config add ext_ram_t_wr=15000; \
+  config add ext_ram_t_wtr=7500; \
+  config add ext_ram_t_rtp=7500"
diff --git a/bal_release/3rdparty/bcm-sdk/rc/arad/config.bcm b/bal_release/3rdparty/bcm-sdk/rc/arad/config.bcm
new file mode 100644
index 0000000..9fcb9ba
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/arad/config.bcm
@@ -0,0 +1,1838 @@
+#
+# $Id: config-sand.bcm,v 1.140 2013/09/22 14:29:47 tomerma Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+
+#########################################
+##cfg for BCM88640 (PetraB) and BCM88650 (Arad)
+#########################################
+
+## temporary suppressing unknown soc properties warnings - till adding them unknown to property.h/propgen
+## (need to be the first soc property in the file).
+suppress_unknown_prop_warnings=1
+
+## Multi device system (Negev): 2 devices, fabric mode is FE, mod id is slot id
+## (Top line card is 0, button is 1).
+#diag_chassis=1
+
+## Disable diag init application. Should be used if one wants to run his own
+## application instead of the diag init example
+#diag_disable=1
+
+## Skip cosq configuration in diag_init
+#diag_cosq_disable=1
+
+#########################################
+##cfg for BCM88650 - Arad
+#########################################
+
+### Device configuration ###
+
+## Activate Emulation partial init. Values: 0 - Normal, 1 - Emulation .Default: 0x0.
+diag_emulator_partial_init.BCM88650=0
+
+## General
+# Set the FAP Device mode
+# Options: PP / TM / TDM_OPTIMIZED / TDM_STANDARD
+fap_device_mode.BCM88650=PP
+
+## Credit worth size (Bytes)
+credit_size.BCM88650=1024
+
+## Clock configurations
+# Core clock speed (MHz). Default: 600 MHz
+core_clock_speed_khz.BCM88650=600000
+# System reference clock (MHz). Default: 600 MHz
+system_ref_core_clock_khz.BCM88650=600000
+
+### Network Interface configuration ###
+## Use of the ucode_port_<Local-Port-Id>=<Interface-type>[<Interface-Id>][.<Channel-Id>]
+## Local port range: 0 - 255.
+## Interface types: XAUI/RXAUI/SGMII/ILKN/10GBase-R/XLGE/CGE/CPU
+
+# Map bcm local port to CPU[.channel] interfaces
+ucode_port_180.BCM88650=CPU.0
+
+pon_application_support_enabled_0.BCM88650=TRUE
+pon_application_support_enabled_1.BCM88650=TRUE
+pon_application_support_enabled_2.BCM88650=TRUE
+pon_application_support_enabled_3.BCM88650=TRUE
+#pon_application_support_enabled_4.BCM88650=TRUE
+#pon_application_support_enabled_5.BCM88650=TRUE
+#pon_application_support_enabled_6.BCM88650=TRUE
+#pon_application_support_enabled_7.BCM88650=TRUE
+
+vlan_match_criteria_mode=PON_PCP_ETHERTYPE
+
+#Firmware mode:
+# 0=DEFAULT
+# 1=SFP_OPT_SR4     - optical short range
+# 2=SFP_DAC         - direct attach copper
+# 3=XLAUI           - 40G XLAUI mode
+# 4=FORCE_OSDFE     - force over sample digital feedback equalization
+# 5=FORCE_BRDFE     - force baud rate digital feedback equalization
+# 6=SW_CL72         - software cl72 with AN on
+# 7=CL72_WITHOUT_AN - cl72 without AN
+#For Negev2 chassis enable DFE is recommended
+
+serdes_if_type=1024
+
+#serdes_firmware_mode.BCM88650=3
+serdes_firmware_mode_il.BCM88650=4
+serdes_firmware_mode_sfi.BCM88650=0
+
+#
+# Serdes firmware mode for Channelized PON interfaces
+#
+#serdes_firmware_mode_xe0.BCM88650=0
+#serdes_firmware_mode_xe1.BCM88650=0
+#serdes_firmware_mode_xe2.BCM88650=0
+#serdes_firmware_mode_xe3.BCM88650=0
+#serdes_firmware_mode_xe4.BCM88650=0
+#serdes_firmware_mode_xe5.BCM88650=0
+#serdes_firmware_mode_xe6.BCM88650=0
+#serdes_firmware_mode_xe7.BCM88650=0
+#serdes_firmware_mode_xe8.BCM88650=0
+#serdes_firmware_mode_xe9.BCM88650=0
+#serdes_firmware_mode_xe10.BCM88650=0
+#serdes_firmware_mode_xe11.BCM88650=0
+#serdes_firmware_mode_xe12.BCM88650=0
+#serdes_firmware_mode_xe13.BCM88650=0
+#serdes_firmware_mode_xe14.BCM88650=0
+#serdes_firmware_mode_xe15.BCM88650=0
+
+#
+# Serdes firmware mode for NNI interfaces
+#
+serdes_firmware_mode_xe128.BCM88650=2
+serdes_firmware_mode_xe129.BCM88650=2
+serdes_firmware_mode_xe130.BCM88650=2
+serdes_firmware_mode_xe131.BCM88650=2
+serdes_firmware_mode_xe0.BCM88650=2
+serdes_firmware_mode_xe1.BCM88650=2
+serdes_firmware_mode_xe2.BCM88650=2
+serdes_firmware_mode_xe3.BCM88650=2
+
+#
+# Set the speed for the PON-side ports (connected to Pioneer) to 12.5G
+#
+#port_init_speed_xe0.BCM88650=12500
+#port_init_speed_xe1.BCM88650=12500
+#IL# change xe3, xe2 speed to 2.5G and 1G
+port_init_speed_xe2.BCM88650=2500
+port_init_speed_xe3.BCM88650=1000
+#port_init_speed_xe4.BCM88650=12500
+#port_init_speed_xe5.BCM88650=12500
+#port_init_speed_xe6.BCM88650=12500
+#port_init_speed_xe7.BCM88650=12500
+#port_init_speed_xe8.BCM88650=12500
+#port_init_speed_xe9.BCM88650=12500
+#port_init_speed_xe10.BCM88650=12500
+#port_init_speed_xe11.BCM88650=12500
+#port_init_speed_xe12.BCM88650=12500
+#port_init_speed_xe13.BCM88650=12500
+#port_init_speed_xe14.BCM88650=12500
+#port_init_speed_xe15.BCM88650=12500
+
+#
+# Set the number of priorities for the PON-side ports (connected to
+# Pioneer) to '2'.
+#
+port_priorities_xe0.BCM88650=2
+port_priorities_xe1.BCM88650=2
+port_priorities_xe2.BCM88650=2
+port_priorities_xe3.BCM88650=2
+#port_priorities_xe4.BCM88650=2
+#port_priorities_xe5.BCM88650=2
+#port_priorities_xe6.BCM88650=2
+#port_priorities_xe7.BCM88650=2
+#port_priorities_xe8.BCM88650=2
+#port_priorities_xe9.BCM88650=2
+#port_priorities_xe10.BCM88650=2
+#port_priorities_xe11.BCM88650=2
+#port_priorities_xe12.BCM88650=2
+#port_priorities_xe13.BCM88650=2
+#port_priorities_xe14.BCM88650=2
+#port_priorities_xe15.BCM88650=2
+
+#
+# Map bcm local port to Network-Interface[.channel] interfaces
+#
+# PON Interfaces
+#
+
+#
+# Non-channelized PON Interfaces
+#
+# Uncomment the following if using non-channelized PON interfaces with
+# Pioneer.
+#
+#ucode_port_0.BCM88650=10GBase-R8
+#ucode_port_1.BCM88650=10GBase-R9
+#ucode_port_2.BCM88650=10GBase-R10
+#ucode_port_3.BCM88650=10GBase-R11
+#ucode_port_4.BCM88650=10GBase-R12
+#ucode_port_5.BCM88650=10GBase-R13
+#ucode_port_6.BCM88650=10GBase-R14
+#ucode_port_7.BCM88650=10GBase-R15
+
+#
+# Channelized PON Interfaces
+#
+# Define virtual ports for the 10G Channels
+#
+#ucode_port_0.BCM88650=10GBase-R8.0
+#ucode_port_1.BCM88650=10GBase-R9.0
+#ucode_port_2.BCM88650=10GBase-R10.0
+#ucode_port_3.BCM88650=10GBase-R11.0
+#ucode_port_4.BCM88650=10GBase-R12.0
+#ucode_port_5.BCM88650=10GBase-R13.0
+#ucode_port_6.BCM88650=10GBase-R14.0
+#ucode_port_7.BCM88650=10GBase-R15.0
+
+#
+# Define virtual ports for the 1G Channels
+#
+#ucode_port_8.BCM88650=10GBase-R8.1
+#ucode_port_9.BCM88650=10GBase-R9.1
+#ucode_port_10.BCM88650=10GBase-R10.1
+#ucode_port_11.BCM88650=10GBase-R11.1
+#ucode_port_12.BCM88650=10GBase-R12.1
+#ucode_port_13.BCM88650=10GBase-R13.1
+#ucode_port_14.BCM88650=10GBase-R14.1
+#ucode_port_15.BCM88650=10GBase-R15.1
+
+#
+# NNI Interfaces
+#
+ucode_port_128.BCM88650=10GBase-R0
+ucode_port_129.BCM88650=10GBase-R1
+ucode_port_130.BCM88650=10GBase-R2
+ucode_port_131.BCM88650=10GBase-R3
+ucode_port_0.BCM88650=10GBase-R4
+ucode_port_1.BCM88650=10GBase-R5
+ucode_port_2.BCM88650=10GBase-R6
+ucode_port_3.BCM88650=10GBase-R7
+
+#ucode_port_200.BCM88650=CPU.1
+#ucode_port_201.BCM88650=CPU.2
+#ucode_port_202.BCM88650=CPU.3
+#ucode_port_203.BCM88650=CPU.4
+
+#40G
+#ucode_port_1.BCM88650=XLGE0
+#ucode_port_2.BCM88650=XLGE1
+#ucode_port_3.BCM88650=XLGE2
+#ucode_port_4.BCM88650=XLGE3
+#ucode_port_5.BCM88650=XLGE4
+#ucode_port_6.BCM88650=XLGE5
+#ucode_port_7.BCM88650=XLGE6
+
+#ILKN configuration - basic config
+#ucode_port_31.BCM88650=ILKN0
+#ucode_port_32.BCM88650=ILKN1
+#ilkn_num_lanes_0.BCM88650=12
+#ilkn_num_lanes_1.BCM88650=12
+#port_init_speed_il.BCM88650=10312
+
+
+#ILKN per port channel stat
+#ilkn_counters_mode.BCM88650=PACKET_PER_CHANNEL
+
+#ILKN configuration - advanced
+#ilkn_metaframe_sync_period=2048
+# Enable\Disable ILKN status message sent through an out-of-band interface.
+# ilkn_interface_status_oob_ignore.BCM88650=1
+
+##ILKN retransmit
+#ilkn_retransmit_enable_rx.BCM88650=1
+#ilkn_retransmit_enable_tx.BCM88650=1
+#ilkn_retransmit_buffer_size.BCM88650=250
+#ilkn_retransmit_num_requests_resent.BCM88650=15
+#ilkn_retransmit_num_sn_repetitions_tx.BCM88650=1
+#ilkn_retransmit_num_sn_repetitions_rx.BCM88650=1
+#ilkn_retransmit_rx_timeout_words.BCM88650=3800
+#ilkn_retransmit_rx_timeout_sn.BCM88650=250
+#ilkn_retransmit_rx_ignore.BCM88650=80
+#ilkn_retransmit_rx_reset_when_error_enable.BCM88650=1
+#ilkn_retransmit_rx_watchdog.BCM88650=0
+#ilkn_retransmit_rx_reset_when_alligned_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_retry_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_after_disc_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_before_disc_error_enable.BCM88650=0
+#ilkn_retransmit_rx_reset_when_timout_error_enable.BCM88650=0
+#ilkn_retransmit_tx_wait_for_seq_num_change_enable.BCM88650=1
+#ilkn_retransmit_tx_ignore_requests_when_fifo_almost_empty.BCM88650=1
+
+#ucode_port_40.BCM88650=RCY.0
+#ucode_port_41.BCM88650=RCY.1
+#ucode_port_42.BCM88650=RCY.2
+
+## CAUI Configuration
+#ucode_port_41.BCM88650=CGE0
+#ucode_port_42.BCM88650=CGE1
+caui_num_lanes_0.BCM88650=10
+caui_num_lanes_1.BCM88650=10
+#Required for working IXIA 100G port:
+mld_lane_swap_lane20_ce.BCM88650=0
+mld_lane_swap_lane21_ce.BCM88650=1
+mld_lane_swap_lane0_ce.BCM88650=20
+mld_lane_swap_lane1_ce.BCM88650=21
+
+# This configures the lane polarity
+pb_serdes_lane_swap_polarity_tx_phy1.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy2.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy3.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy4.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy5.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy6.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy7.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy8.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy10.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy13.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy14.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy17.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy18.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy19.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy20.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy21.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy22.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy23.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy24.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy25.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy27.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy28.BCM88650=0
+
+pb_serdes_lane_swap_polarity_rx_phy1.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy2.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy3.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy4.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy5.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy6.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy7.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy8.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy10.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy13.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy14.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy17.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy18.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy19.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy20.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy21.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy22.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy23.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy24.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy25.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy27.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy28.BCM88650=0
+
+xgxs_tx_lane_map_quad0.BCM88650=0x3210
+xgxs_tx_lane_map_quad1.BCM88650=0x3210
+xgxs_tx_lane_map_quad2.BCM88650=0x3210
+xgxs_tx_lane_map_quad3.BCM88650=0x3210
+xgxs_tx_lane_map_quad4.BCM88650=0x3210
+xgxs_tx_lane_map_quad5.BCM88650=0x3210
+xgxs_tx_lane_map_quad6.BCM88650=0x3210
+
+xgxs_rx_lane_map_quad0.BCM88650=0x3210
+xgxs_rx_lane_map_quad1.BCM88650=0x3210
+xgxs_rx_lane_map_quad2.BCM88650=0x3210
+xgxs_rx_lane_map_quad3.BCM88650=0x3210
+xgxs_rx_lane_map_quad4.BCM88650=0x3210
+xgxs_rx_lane_map_quad5.BCM88650=0x3210
+xgxs_rx_lane_map_quad6.BCM88650=0x3210
+
+
+
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88650=1
+
+#Port init mode
+#port_init_duplex=0
+#port_init_adv=0
+#port_init_autoneg=0
+
+
+# This disables serdes initialization
+# phy_null.BCM88650=1
+
+##  Number of Internal ports
+# Enable the ERP port. Values: 0 / 1.
+num_erp_tm_ports.BCM88650=1
+# Enable the OLP port. Values: 0 / 1.
+num_olp_tm_ports.BCM88650=1
+# Enable OAMP
+num_oamp_ports.BCM88650=0
+
+## Firmware Load Method
+load_firmware.BCM88650=0x102
+
+### Headers configuration ###
+
+## Use of the tm_port_header_type_<Local-Port-Id>=<Header-type>
+## Default header type is derived from fap_device_mode: If fap_device_mode is
+## PP, default header type is ETH. Otherwise, defualt header type is TM.
+## Header type per port can be overriden.
+## All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/UDH_ETH
+## Injected header types: if PTCH, INJECTED (local Port of type TM) or INJECTED_PP (PP)
+##                        if PTCH-2, INJECTED_2 (local Port of type TM) or INJECTED_2_PP (PP)
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88650=TM
+
+tm_port_header_type_in_180.BCM88650=INJECTED_2
+tm_port_header_type_out_180.BCM88650=CPU
+
+tm_port_header_type_in_200.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_200.BCM88650=ETH
+tm_port_header_type_in_201.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_201.BCM88650=ETH
+tm_port_header_type_in_202.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_202.BCM88650=ETH
+tm_port_header_type_in_203.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_203.BCM88650=ETH
+
+### Parser Configuration ###
+# Parser has 4 custom macros that are allocated dynamically and
+# configured according to the following features and soc properties:
+# Trill (1 macro) - trill_mode
+# FCoE (2 macros) - bcm886xx_fcoe_switch_mode
+# VxLAN (1 macro) - bcm886xx_vxlan_enable
+# IPv6-Extension-header (2 macros) - bcm886xx_ipv6_ext_hdr_enable
+# UDP (1 macro) - UDP parsing is enabled by default, and can be 
+#  disabled with soc property custom_feature_udp_parse_disable
+#  When disabling UDP parsing VxLAN and 1588oUDP are affected
+
+# Enable IPv6 Extension Header, 0 - disable (default), 1 - enable
+#bcm886xx_ipv6_ext_hdr_enable=1
+
+# Disable UDP parsing, 0 - enable (default), 1 - disable
+#custom_feature_udp_parse_disable=1
+
+#OAMP port
+#tm_port_header_type_out_232.BCM88650=CPU
+
+#MPLS-TP channel types for OAM/BFD - If MPLS-TP used, channel should be specified
+#Available types: mplstp_bfd_control_channel_type
+#               mplstp_pw_ach_channel_type
+#               mplstp_dlm_channel_type
+#               mplstp_ilm_channel_type
+#               mplstp_dm_channel_type
+#               mplstp_ipv4_channel_type
+#               mplstp_cc_channel_type
+#               mplstp_cv_channel_type
+#               mplstp_on_demand_cv_channel_type
+#               mplstp_pwe_oam_channel_type
+#               mplstp_ipv6_channel_type
+#               mplstp_fault_oam_channel_type
+#               mplstp_g8113_channel_type
+#mplstp_g8113_channel_type=0x8902
+
+
+
+# Set the recycling port processing to be raw (static forwarding)
+tm_port_header_type_rcy.BCM88650=RAW
+
+### RCPU
+# Valid CPU local ports on which RCPU packets can be received by slave device.
+#rcpu_rx_pbmp=0xf00000000000000000000000000000000000000000000000001
+
+#tm_port_header_type_514.BCM88650=RAW
+
+## Header extensions
+# Set if an FTMH Out-LIF extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS
+fabric_ftmh_outlif_extension.BCM88650=IF_MC
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88660: ENABLED, FULL_HASH
+# Options for 88650: ENABLED
+# Options for 88640 compatible: DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY / 16B_STACKING_ROUTE_HISTORY / 
+#                               STANDBY_MC_LB (available only for AradPlus)
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88650=DISABLED
+
+# Set if an OTMH Out-LIF (CUD) Extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS / DOUBLE_TAG (two hop scheduling)
+# Default: NEVER
+# tm_port_otmh_outlif_ext_mode_13.BCM88650=NEVER
+
+# Set if an OTMH Source-System-Port Extension is present.
+# Option: 0/1
+# Default: 0
+# tm_port_otmh_src_ext_enable_13.BCM88650=0
+
+#Trunk hash format, relevant only for AradPlus. Possible values: NORMAL (default) / INVERTED / DUPLICATED.
+#trunk_hash_format=NORMAL
+
+## Stacking Application
+#stacking_enable.BCM88650=1
+#custom_feature_stamp_uc_destination.BCM88650=1
+
+## System RED
+# Set System-Red functionality.
+#system_red_enable.BCM88650=1
+
+# Indicate the size (Bytes) of a first header to skip
+# before the major header at ingress (e.g. Ethernet, ITMH)
+# It can be set per port also
+first_header_size.BCM88650=0
+
+# Indicate the size (Bytes) of the PMF Extension Headers
+# to remove for TM header type ports (expecting ITMH)
+# Set per port
+#post_headers_size_0.BCM88650=4
+
+# Indicate the size (Bytes) of the User-Headers: configurable
+# headers located in the fabric between internal headers and
+# Ethernet. Their values are set by Ingress FP, and can be used
+# by Egress FP or Egress Editor.
+# units: bits. 4 values can be set:
+# 0 - size of the 1st User-Header, for the Egress PMF. 0b / 8b / 16b
+# 1 - size of the 2nd User-Header, for the Egress PMF. 0b / 8b / 16b
+# The sum of these 2 values should be under 16b
+# 2, 3 - size of the 1st/2nd User-Header, for the Egress Editor.
+# 0b / 8b / 16b / 24b / 32b
+# Each of the global User-Header size must be under 32 bits, but not 24 bits.
+# The Egress FP field is always at the MSB of the User-Header
+# Not available for 88650-A0.
+#field_class_id_size_0.BCM88650=8
+#field_class_id_size_1.BCM88650=0
+#field_class_id_size_2.BCM88650=24
+#field_class_id_size_3.BCM88650=0
+
+
+### Trunk - LAG configuration ###
+# Set Set the number of LAGs: 1024, 512, 256, 128 or 64
+number_of_trunks.BCM88650=256
+
+### SYNCE configuration ###
+## Synchronous Ethernet Signal Mode.
+## Options: TWO_DIFF_CLK, TWO_CLK_AND_VALID. Default: TWO_CLK_AND_VALID
+#sync_eth_mode.BCM88650=TWO_CLK_AND_VALID
+
+## Clock Source (single SerDes) lane in the specified NIF port.
+## Usage: sync_eth_clk_to_nif_id_clk_<clk_number>=<serdes_number>
+#sync_eth_clk_to_nif_id_clk_0.BCM88650=1
+#sync_eth_clk_to_nif_id_clk_1.BCM88650=1
+
+## Clock Divider for the selected recovered clock. Valid values: 1/2/4. Default: 1.
+## Usage: sync_eth_clk_divider_clk_<clk_number>=<1/2/4>
+#sync_eth_clk_divider_clk_0.BCM88650=1
+#sync_eth_clk_divider_clk_1.BCM88650=1
+
+## Enable the automatic squelch function for the recovered clock. Valid values: 0/1. Default: 0.
+## Usage: sync_eth_clk_squelch_enable_clk_<clk_number>=<0/1>
+#sync_eth_clk_squelch_enable_clk_0.BCM88650=0
+#sync_eth_clk_squelch_enable_clk_1.BCM88650=0
+
+### ELK configuration ###
+## External lookup (TCAM) Device type select, Indicate the External lookup Device type.
+# Value Options: NONE/NL88650. Default: NONE.
+#ext_tcam_dev_type=NL88650
+
+## Set ELK FWD table Size.
+# format: ext_xxx_fwd_table_size.
+# where xxx replaced by FWD options: ip4_uc_rpf/ip4_mc/ip6_uc_rpf/ip6/ip6_mc/trill_uc/trill_mc/mpls/coup_mpls
+# Value Options: (0) - External table disabled, >0: number of entries. Default: 0.
+#ext_ip4_uc_rpf_fwd_table_size=8192
+#ext_ip4_mc_fwd_table_size=8192
+
+## Set ELK IP FWD use NetRoute  ALG.
+# Value Options: ALG_LPM_LPM/ALG_LPM_NETROUTE/ALG_LPM_TCAM. Default: ALG_LPM_TCAM.
+#ext_fwd_algorithm_lpm=ALG_LPM_TCAM
+
+## Set ELK interface mode.
+# Change ELK interface configuration to support CAUI port.
+# Value Options: 0/1. 0 - Normal mode, 1  2 CAUI port + ELK mode. Default: 0.
+#ext_interface_mode=0
+
+### Configure MDIO interface
+# External MDIO clock rate divisor . Default: 0x24.
+#rate_ext_mdio_divisor=0x36
+# External MDIO clock rate divisor. Default: 0x1.
+#rate_ext_mdio_dividend=1
+
+### TDM - OTN configuration ###
+#fap_tdm_bypass.BCM88650=0
+
+# Indicate if a Petra-B device is connected to the actual device
+# For TDM/OTN applications,
+# system_is_petra_b_in_system.BCM88650=0
+##Indicate if TDM can arrive throgh primary pipe.
+#Should be 1 for a System with PetraB that connected to fabric over primary pipe.
+fabric_tdm_over_primary_pipe.BCM88650=0
+
+### Fabric configuration ###
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88650=2
+#SFI speed rate
+port_init_speed_sfi.BCM88650=10312
+#CL72
+#port_init_cl72_sfi=0
+fabric_segmentation_enable.BCM88650=1
+
+## Fabric transmission mode
+# Set the Connect mode to the Fabric
+# Options: FE - presence of a Fabric device (single stage) / MULT_STAGE_FE -  Multi-stage /
+# SINGLE_FAP - stand-alone device / MESH - mesh / BACK2BACK - 2 devices in Mesh
+fabric_connect_mode.BCM88650=SINGLE_FAP
+#fabric_connect_mode.BCM88650=FE
+
+## Cell format configuration
+# Indicate if the traffic can be sent in dual pipe
+is_dual_mode.BCM88650=0
+# Indicate the format of the cell:
+# A VCS128 cell is used if system_is_vcs_128_in_system or system_is_fe600_in_system is TRUE
+system_is_vcs_128_in_system.BCM88650=0
+system_is_fe600_in_system.BCM88650=0
+
+### WRED ###
+
+# Set the maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88650=0
+
+### OCB (On-Chip Buffer) configuration ###
+# Enable the OCB
+# Enable MODES:
+#   0/FALSE        -->  OCB_DISABLED     --> No OCB use
+#   1/TRUE         -->  OCB_ENABLED      --> Like in Arad-A0/B0. Some packets may use both DRAM and OCB resources
+#   ONE_WAY_BYPASS -->  Depends on number of present drams (available only for AradPlus):
+#                      0 drams:   - OCB_ONLY
+#                      1 drams:   - OCB_ONLY_1_DRAM     -->  : OCB-only with 1 DRAM for the free pointers
+#                      2-8 drams: - OCB_DRAM_SEPARATE   -->  : OCB and DRAM coexist separately
+#   Default: TRUE.
+bcm886xx_ocb_enable.BCM88650=1
+
+# OCB Data Buffer size. Possible values: 128/256/512/1024. Default: 256.
+bcm886xx_ocb_databuffer_size.BCM88650=256
+# Repartition between Unicast and Full Multicast buffers.
+# 0: 80% Unicast and 20% Multicast, 1: Unicast-Only
+bcm886xx_ocb_repartition.BCM88650=0
+
+### PDM configuration ###
+# Set the PDM Mode.
+# 0: simple (default), 1: reduced (mandatory for LLFC-VSQ, PFC-VSQ, or ST-VSQ)
+bcm886xx_pdm_mode.BCM88650=0
+
+### Multicast Number of DBuff mode ###
+# Set IQM FMC buffers-replication sizes
+# Options for 88650: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE/ARAD_INIT_FMC_64_REP_128K_DBUFF_MODE
+# Default: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88650=ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+
+### Multicast configuration ###
+# Multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_min.BCM88650=0
+egress_multicast_direct_bitmap_max.BCM88650=4095
+
+### VOQ - Flow configuration ###
+
+# Set the VOQ mapping mode:
+# DIRECT: More than 4K System Ports are supported. System-level WRED is not supported.
+# INDIRECT: similar to Petra-B. Up to 4K System Ports.
+voq_mapping_mode.BCM88650=INDIRECT
+
+# Set the Base Queue to be added to the packet flow-id
+# when the Flow-Id is set explicitely either by the ITMH
+# or by the Destination resolution in the Packet processing
+flow_mapping_queue_base.BCM88650=0
+
+# Set the number of priorities supported at egress per Port
+# Options: 1 / 2 / 8
+port_priorities.BCM88650=8
+
+# Set the shared multicast resource mode: Strict / Discrete
+egress_shared_resources_mode.BCM88650=Strict
+
+# Define outgoing port rate mode in data rate or packet rate.
+# Options: DATA / PACKET
+otm_port_packet_rate.BCM88650=DATA
+
+# Set Port egress recycling scheduler configuration.
+# 0: Strict Priority Scheduler, 1: Round Robin Scheduler
+port_egress_recycling_scheduler_configuration.BCM88650=0
+
+# Set statically the region mode per region id
+# 0: queue connectors only (InterDigitated = FALSE, OddEven = TRUE)
+# 1: queue connectors, SE (InterDigitated =TRUE, OddEven = TRUE)
+# 2: queue connectors, SE (InterDigitated =TRUE, OddEven = FALSE)
+dtm_flow_mapping_mode_region_65.BCM88650=0
+dtm_flow_mapping_mode_region_66.BCM88650=0
+dtm_flow_mapping_mode_region_67.BCM88650=0
+dtm_flow_mapping_mode_region_68.BCM88650=0
+dtm_flow_mapping_mode_region_69.BCM88650=0
+dtm_flow_mapping_mode_region_70.BCM88650=0
+dtm_flow_mapping_mode_region_71.BCM88650=0
+dtm_flow_mapping_mode_region_72.BCM88650=0
+dtm_flow_mapping_mode_region_73.BCM88650=0
+dtm_flow_mapping_mode_region_74.BCM88650=0
+dtm_flow_mapping_mode_region_75.BCM88650=0
+dtm_flow_mapping_mode_region_76.BCM88650=0
+dtm_flow_mapping_mode_region_77.BCM88650=0
+dtm_flow_mapping_mode_region_78.BCM88650=0
+dtm_flow_mapping_mode_region_79.BCM88650=0
+dtm_flow_mapping_mode_region_80.BCM88650=0
+dtm_flow_mapping_mode_region_81.BCM88650=1
+dtm_flow_mapping_mode_region_82.BCM88650=1
+dtm_flow_mapping_mode_region_83.BCM88650=1
+dtm_flow_mapping_mode_region_84.BCM88650=1
+dtm_flow_mapping_mode_region_85.BCM88650=1
+dtm_flow_mapping_mode_region_86.BCM88650=1
+dtm_flow_mapping_mode_region_87.BCM88650=1
+dtm_flow_mapping_mode_region_88.BCM88650=1
+dtm_flow_mapping_mode_region_89.BCM88650=1
+dtm_flow_mapping_mode_region_90.BCM88650=1
+dtm_flow_mapping_mode_region_91.BCM88650=1
+dtm_flow_mapping_mode_region_92.BCM88650=1
+dtm_flow_mapping_mode_region_93.BCM88650=1
+dtm_flow_mapping_mode_region_94.BCM88650=1
+dtm_flow_mapping_mode_region_95.BCM88650=1
+dtm_flow_mapping_mode_region_96.BCM88650=1
+dtm_flow_mapping_mode_region_97.BCM88650=1
+dtm_flow_mapping_mode_region_98.BCM88650=1
+dtm_flow_mapping_mode_region_99.BCM88650=2
+dtm_flow_mapping_mode_region_100.BCM88650=2
+dtm_flow_mapping_mode_region_101.BCM88650=2
+dtm_flow_mapping_mode_region_102.BCM88650=2
+dtm_flow_mapping_mode_region_103.BCM88650=2
+dtm_flow_mapping_mode_region_104.BCM88650=2
+dtm_flow_mapping_mode_region_105.BCM88650=2
+dtm_flow_mapping_mode_region_106.BCM88650=2
+dtm_flow_mapping_mode_region_107.BCM88650=2
+dtm_flow_mapping_mode_region_108.BCM88650=2
+dtm_flow_mapping_mode_region_109.BCM88650=2
+dtm_flow_mapping_mode_region_110.BCM88650=2
+dtm_flow_mapping_mode_region_111.BCM88650=2
+dtm_flow_mapping_mode_region_112.BCM88650=2
+dtm_flow_mapping_mode_region_113.BCM88650=2
+dtm_flow_mapping_mode_region_114.BCM88650=2
+dtm_flow_mapping_mode_region_115.BCM88650=2
+dtm_flow_mapping_mode_region_116.BCM88650=2
+dtm_flow_mapping_mode_region_117.BCM88650=2
+dtm_flow_mapping_mode_region_118.BCM88650=2
+dtm_flow_mapping_mode_region_119.BCM88650=2
+dtm_flow_mapping_mode_region_120.BCM88650=2
+dtm_flow_mapping_mode_region_121.BCM88650=2
+dtm_flow_mapping_mode_region_122.BCM88650=2
+dtm_flow_mapping_mode_region_123.BCM88650=2
+dtm_flow_mapping_mode_region_124.BCM88650=2
+dtm_flow_mapping_mode_region_125.BCM88650=2
+dtm_flow_mapping_mode_region_126.BCM88650=2
+dtm_flow_mapping_mode_region_127.BCM88650=2
+dtm_flow_mapping_mode_region_128.BCM88650=2
+
+#IL# Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88650=2
+dtm_flow_nof_remote_cores_region_2.BCM88650=2
+dtm_flow_nof_remote_cores_region_3.BCM88650=2
+dtm_flow_nof_remote_cores_region_4.BCM88650=2
+dtm_flow_nof_remote_cores_region_5.BCM88650=2
+dtm_flow_nof_remote_cores_region_6.BCM88650=2
+dtm_flow_nof_remote_cores_region_7.BCM88650=2
+dtm_flow_nof_remote_cores_region_8.BCM88650=2
+dtm_flow_nof_remote_cores_region_9.BCM88650=2
+dtm_flow_nof_remote_cores_region_10.BCM88650=2
+dtm_flow_nof_remote_cores_region_11.BCM88650=2
+dtm_flow_nof_remote_cores_region_12.BCM88650=2
+dtm_flow_nof_remote_cores_region_13.BCM88650=2
+dtm_flow_nof_remote_cores_region_14.BCM88650=2
+dtm_flow_nof_remote_cores_region_15.BCM88650=2
+dtm_flow_nof_remote_cores_region_16.BCM88650=2
+dtm_flow_nof_remote_cores_region_17.BCM88650=2
+dtm_flow_nof_remote_cores_region_18.BCM88650=2
+dtm_flow_nof_remote_cores_region_19.BCM88650=2
+dtm_flow_nof_remote_cores_region_20.BCM88650=2
+dtm_flow_nof_remote_cores_region_21.BCM88650=2
+dtm_flow_nof_remote_cores_region_22.BCM88650=2
+dtm_flow_nof_remote_cores_region_23.BCM88650=2
+dtm_flow_nof_remote_cores_region_24.BCM88650=2
+dtm_flow_nof_remote_cores_region_25.BCM88650=2
+dtm_flow_nof_remote_cores_region_26.BCM88650=2
+dtm_flow_nof_remote_cores_region_27.BCM88650=2
+dtm_flow_nof_remote_cores_region_28.BCM88650=2
+dtm_flow_nof_remote_cores_region_29.BCM88650=2
+dtm_flow_nof_remote_cores_region_30.BCM88650=2
+dtm_flow_nof_remote_cores_region_31.BCM88650=2
+dtm_flow_nof_remote_cores_region_32.BCM88650=2
+dtm_flow_nof_remote_cores_region_33.BCM88650=2
+dtm_flow_nof_remote_cores_region_34.BCM88650=2
+dtm_flow_nof_remote_cores_region_35.BCM88650=2
+dtm_flow_nof_remote_cores_region_36.BCM88650=2
+dtm_flow_nof_remote_cores_region_37.BCM88650=2
+dtm_flow_nof_remote_cores_region_38.BCM88650=2
+dtm_flow_nof_remote_cores_region_39.BCM88650=2
+dtm_flow_nof_remote_cores_region_40.BCM88650=2
+dtm_flow_nof_remote_cores_region_41.BCM88650=2
+dtm_flow_nof_remote_cores_region_42.BCM88650=2
+dtm_flow_nof_remote_cores_region_43.BCM88650=2
+dtm_flow_nof_remote_cores_region_44.BCM88650=2
+dtm_flow_nof_remote_cores_region_45.BCM88650=2
+dtm_flow_nof_remote_cores_region_46.BCM88650=2
+dtm_flow_nof_remote_cores_region_47.BCM88650=2
+dtm_flow_nof_remote_cores_region_48.BCM88650=2
+dtm_flow_nof_remote_cores_region_49.BCM88650=2
+dtm_flow_nof_remote_cores_region_50.BCM88650=2
+dtm_flow_nof_remote_cores_region_51.BCM88650=2
+dtm_flow_nof_remote_cores_region_52.BCM88650=2
+dtm_flow_nof_remote_cores_region_53.BCM88650=2
+dtm_flow_nof_remote_cores_region_54.BCM88650=2
+dtm_flow_nof_remote_cores_region_55.BCM88650=2
+dtm_flow_nof_remote_cores_region_56.BCM88650=2
+dtm_flow_nof_remote_cores_region_57.BCM88650=2
+dtm_flow_nof_remote_cores_region_58.BCM88650=2
+dtm_flow_nof_remote_cores_region_59.BCM88650=2
+dtm_flow_nof_remote_cores_region_60.BCM88650=2
+
+dtm_flow_nof_remote_cores_region_core0_2.BCM88650=1
+dtm_flow_nof_remote_cores_region_core0_3.BCM88650=1
+
+### Flow Control configuration ###
+# Set the Flow control type per Port.
+# Options: LL (Link-level) / CB2 (Class-Based - 2 classes) /
+# CB8 (Class-Based - 8 classes)
+# flow_control_type.BCM88650=LL
+
+## Out-Of-Band Flow control configuration
+#spn_FC_OOB_TYPE, spn_FC_OOB_MODE, spn_FC_OOB_CALENDER_LENGTH, spn_FC_OOB_CALENDER_REP_COUNT,
+
+## Set voltage mode for oob interfaces
+#HSTL_1.5V
+#3.3V
+#HSTL_1.5V_VDDO_DIV_2
+ext_voltage_mode_oob=3.3V
+
+## Inband Interlaken configuration
+# spn_FC_INBAND_INTLKN_MODE, spn_FC_INBAND_INTLKN_CALENDER_LENGTH, spn_FC_INBAND_INTLKN_CALENDER_REP_COUNT
+# spn_FC_INBAND_INTLKN_CALENDER_LLFC_MODE, spn_FC_INBAND_INTLKN_LLFC_MUB_ENABLE_MASK
+
+### Meter engine configuration ###
+
+# Specify meter operation mode
+# 32 - Two meters per packet (32k total)
+# 64 - One meter per packet (64k total)
+# Options: 0, 32, 64
+policer_ingress_count.BCM88650=32
+
+# For meters in double 32k mode, determine the sharing mode
+# Options:
+# 0 - NONE (only for 64k mode)
+# 1 - SERIAL (only for 32k mode)
+# 2 - PARALLEL (only for 32k mode)
+policer_ingress_sharing_mode.BCM88650=1
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine the mapping
+# Options: BEST, WORST
+# policer_result_parallel_color_map.BCM88650=WORST
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine how the buckets are changed
+# Options: CONSTANT, TRANSPARENT, DEFERRED
+# policer_result_parallel_bucket_update.BCM88650=CONSTANT
+
+# Applies only to Arad+ (88660)
+# Set the Ethernet policer to work in color blind mode
+# rate_color_blind.BCM88650=1
+
+# L2 learn limit mode
+# Options: VLAN, VLAN_PORT, TUNNEL or the numeric equivalent 0-2.
+# Default: VLAN
+# l2_learn_limit_mode = VLAN_PORT
+
+# Applies only to Arad+ (88660)
+# Determines the L2 learn limit ranges when l2_learn_limit_mode is set to VLAN_PORT
+# Two range bases can be selected, each of 16K size.
+# Options: 0, 16K, 32K, 48K.
+# Default: 0 & 16K
+# l2_learn_lif_range_base_0 = 0
+# l2_learn_lif_range_base_1 = 16K
+
+### Counter engine configuration ###
+
+# Set the Counter source
+# Options: INGRESS_FIELD / INGRESS_VOQ / INGRESS_VSQ
+# INGRESS_CNM / EGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM (per queue) / EGRESS_TM_PORT (per port)
+# EGRESS_RECEIVE_VSI / EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM (per queue) / EGRESS_RECEIVE_TM_PORT (per port)
+# INGRESS_OAM / EGRESS_OAM
+# 2 Counter-Pointers can be set (with _0 and _1) for
+# INGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT
+# Range extension can be set (with _LSB and _MSB) for
+# INGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT /EGRESS_RECEIVE_VSI /
+# EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM / EGRESS_RECEIVE_TM_PORT
+counter_engine_source_0.BCM88650=INGRESS_FIELD
+counter_engine_source_1.BCM88650=INGRESS_FIELD_1
+counter_engine_source_2.BCM88650=INGRESS_VOQ
+###
+###  DML
+###
+###  For DML applications, counter engine 3 is used for VOQ
+###  counters. This in combination with configuring the engines used for
+###  VOQs for FWD_DROP allows for counters for 32K VOQs.
+###
+#counter_engine_source_3.BCM88650=EGRESS_FIELD
+counter_engine_source_3.BCM88650=INGRESS_VOQ
+
+# Configure the statistic interface egress source
+# Options: EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT (the default is TM)
+# valid just when there is no conflict with the other counter engines
+#counter_engine_source_stat0.BCM88650=EGRESS_TM
+#counter_engine_source_stat1.BCM88650=EGRESS_TM
+
+
+# Set the Counter engine resolution
+# SIMPLE_COLOR = green, not green
+# SIMPLE_COLOR_FWD = fwd green, fwd not green (BCM88660_A0 only)
+# SIMPLE_COLOR_DROP = drop green, drop not green (BCM88660_A0 only)
+# FWD_DROP = forwarded, dropped
+# GREEN_NOT_GREEN = fwd grn, drop grn, fwd not grn, drop not grn
+# FULL_COLOR = fwd grn, drop grn, fwd not grn, drop yel, drop red
+# ALL = received
+# FWD = forwarded, DROP = droped (not supported by ARAD_A0)
+# CONFIGURABLE = defined by counter_engine_map_ SOC properties (BCM88660_A0 only)
+counter_engine_statistics_0.BCM88650=FULL_COLOR
+counter_engine_statistics_1.BCM88650=FULL_COLOR
+###
+###  DML
+###
+###  For DML applications, counter engine 3 is used for VOQ
+###  counters. This in combination with configuring the engines used for
+###  VOQs for FWD_DROP allows for counters for 32K VOQs.
+###
+#counter_engine_statistics_2.BCM88650=FULL_COLOR
+#counter_engine_statistics_3.BCM88650=FULL_COLOR
+counter_engine_statistics_2.BCM88650=FWD_DROP
+counter_engine_statistics_3.BCM88650=FWD_DROP
+
+# Set the Counter format
+# Options: PACKETS_AND_BYTES / PACKETS / BYTES
+# / MAX_QUEUE_SIZE / PACKETS_AND_PACKETS(supported just in FWD_DROP statistic in BCM88660_A0)
+# If not PACKETS_AND_BYTES or PACKETS_AND_PACKETS, the HW Counter width is 59 bits, thus
+# no background SW operation is performed
+counter_engine_format_0.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_1.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_2.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_3.BCM88650=PACKETS_AND_BYTES
+
+# #enable/disable counter processor background thread (default:1-enable)
+# counter_engine_sampling_interval=1
+
+### Configurable mode configuration (BCM88660_A0 only)###
+# counter_engine_statistics_0.BCM88660_A0=CONFIGURABLE
+# counter_engine_map_enable_0.BCM88660_A0=1
+# counter_engine_map_size_0.BCM88660_A0=4
+# counter_engine_map_fwd_green_offset_0.BCM88660_A0=0
+# counter_engine_map_fwd_yellow_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_red_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_black_offset_0.BCM88660_A0=2
+# counter_engine_map_drop_green_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_yellow_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_red_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_black_offset_0.BCM88660_A0=3
+
+### Statistic-Report configuration ###
+# Enable the Statistic-Interface configuration
+# stat_if_enable_<port> - not supported by ARAD_A0
+# stat_if_enable.BCM88650=1
+
+# ## Statistic-Report Properties
+# # Set the Statistic-Report mode
+# # Options: BILLING / BILLING_QUEUE_NUMBER (not supported by ARAD_A0)/ QSIZE
+# stat_if_report_mode.BCM88650=QSIZE
+# #Indicate if idle reports must be sent
+# #when the Statistic-report rate is too low
+# stat_if_idle_reports_present.BCM88650=0
+# # Indicate if the reported packet size is the original packet size
+# stat_if_report_original_pkt_size.BCM88650=1
+# #If set then a single ingress-billing report will be generated
+# #for the whole set of the multicast copies
+# stat_if_report_multicast_single_copy=1
+# ## Statistic Packet configurations
+# # Set the Statistic Packet size (Bytes)
+# # Valid valued: 65B/126B/248B/492B (Queue-Size), 64B/128B/256B/512B/1024B (Billing)
+# stat_if_pkt_size=64B
+#
+# ## Scrubber configuration
+# # Set the range of VOQs to scrub. Range: 0 - 96K-1.
+# stat_if_scrubber_queue_min.BCM88650=0
+# stat_if_scrubber_queue_max.BCM88650=0
+#
+# # Set the scrubber rate range
+# # If set to 0 (default), the scrubber is disabled. Units: nanoseconds
+# stat_if_scrubber_rate_min.BCM88650=0
+# stat_if_scrubber_rate_max.BCM88650=0
+#
+# # Set the thresholds (thresh_id 0 - 15) defining
+# # occupancy range per resource type:
+# # DRAM Buffers, Buffer descriptors, Buffer descriptors buffers
+# stat_if_scrubber_bdb_th.BCM88650=0
+# stat_if_scrubber_buffer_descr_th.BCM88650=0
+# stat_if_uc_dram_buffer_descr_th.BCM88650=0
+#
+# #Relective report for queue size mode - not supported by ARAD_A0
+# #Reports will be created for queue num range (stat_if_selective_report_queue_min -stat_if_selective_report_queue_max)
+# #Default - all range
+# stat_if_selective_report_queue_min.BCM88650_B0=0
+# stat_if_selective_report_queue_max.BCM88650_B0=98303
+
+### Transaction - DMA configuration ###
+# Time to wait for SCHAN channel response (from CMIC). Units: microseconds.
+
+# TODO
+### Counter threads ###
+# spn_BCM_STAT_PBMP, spn_BCM_STAT_INTERVAL, spn_BCM_STAT_FLAGS
+
+### Interrupts ###
+## Set interrupts global parameters.
+# Options: 1 - Polling interrupt mode, 0 - Line/MSI interrupt mode. Default: 1.
+polled_irq_mode.BCM88650=0
+#  Set the delay in microsecond between the polling, relevant only to Polling mode.  Default: 0x0.
+polled_irq_delay.BCM88650=50000
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling, relevant only to Polling completion mode.
+# SCHAN:
+#schan_intr_enable.0=1
+schan_timeout_usec.BCM88650=300000
+# TDMA
+tdma_intr_enable.BCM88650=1
+tdma_timeout_usec.BCM88650=80000000
+# TSLAM
+tslam_intr_enable.BCM88650=1
+tslam_timeout_usec.BCM88650=80000000
+# MIIM
+#miim_intr_enable.0=1
+miim_timeout_usec.0=300000
+
+### DRAM configuration ###
+
+# DRAM buffer (Dbuff) size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88650=1024
+
+# Number of external DRAMs.
+# Allowed values for 88650: 0/2/3/4/6/8. A value of 0 disables the DRAM.
+# Allowed values for 88660: 0/1/2/3/4/6/8. A value of 0 disables the DRAM.
+#                                          A value of 1 is permitted only in ONE WAY BYPASS ocb mode.
+ext_ram_present.BCM88650=8
+
+### Dram Tuning (Shmoo)
+# 2 = Use Dram saved config Parameters, if no Parameters Perform Shmoo on init. Default option.
+# 1 = Perform Shmoo on init.
+# 0 = Use Dram saved config Parameters, if no Parameters do nothing.
+ddr3_auto_tune.BCM88650=2
+
+### Enable BIST
+# Run Dram BIST on initialization, if BIST fail the initialization will fail. Defult: 1.
+# bist_enable_dram.BCM88650=1
+
+### Example for Dram Saved config Parameters.
+## This example is for ci=14 (Dram=7).
+#ddr3_tune_addrc_ci14=0x000000ae
+#ddr3_tune_wr_dq_wl1_ci14=0x92929292,0x92929292,0x92929292,0x92929292
+#ddr3_tune_wr_dq_wl0_ci14=0x93939393,0x93939393,0x92929292,0x92929292
+#ddr3_tune_wr_dq_ci14=0x80808080
+#ddr3_tune_vref_ci14=0x000007df
+#ddr3_tune_rd_dqs_ci14=0x96969191,0x90909191
+#ddr3_tune_rd_dq_wl1_rn_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rn_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_dq_wl1_rp_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rp_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_en_ci14=0x009d9e9d,0x00a2a3a1
+#ddr3_tune_rd_data_dly_ci14=0x00000505
+   ddr3_tune_rd_dq_wl1_rp_ci8.0=0x82828282,0x82828282,0x8b8b8b8b,0x8b8b8b8b
+    ddr3_tune_wr_dq_wl0_ci4.0=0x93939393,0x93939393,0x92929292,0x92929292
+    ddr3_tune_vref_ci10.0=0x0000079e
+    ddr3_tune_wr_dq_wl1_ci2.0=0x92929292,0x92929292,0x92929292,0x92929292
+    ddr3_tune_wr_dq_ci6.0=0x80808080
+    ddr3_tune_rd_dq_wl0_rn_ci6.0=0x80808080,0x80808080,0x8c8c8c8c,0x8c8c8c8c
+    ddr3_tune_rd_dq_wl1_rp_ci10.0=0x83838383,0x83838383,0x84848484,0x84848484
+    ddr3_tune_rd_dqs_ci8.0=0x96969797,0x94949090
+    ddr3_tune_vref_ci6.0=0x0000079e
+    ddr3_tune_rd_dq_wl0_rp_ci14.0=0x83838383,0x83838383,0x83838383,0x83838383
+    ddr3_tune_rd_en_ci10.0=0x009fa09f,0x009a9c99
+    ddr3_tune_rd_data_dly_ci4.0=0x00000404
+    ddr3_tune_addrc_ci8.0=0x000000ab
+    ddr3_tune_rd_dq_wl0_rp_ci2.0=0x81818181,0x81818181,0x84848484,0x84848484
+    ddr3_tune_rd_dqs_ci10.0=0x96969090,0x90909090
+    ddr3_tune_rd_en_ci2.0=0x009c9c9c,0x009a9c98
+    ddr3_tune_wr_dq_wl0_ci12.0=0x93939393,0x93939393,0x93939393,0x93939393
+    ddr3_tune_rd_dq_wl1_rn_ci4.0=0x84848484,0x84848484,0x8c8c8c8c,0x8c8c8c8c
+    ddr3_tune_addrc_ci10.0=0x000000af
+    ddr3_tune_wr_dq_wl0_ci6.0=0x90909090,0x90909090,0x93939393,0x93939393
+    ddr3_tune_vref_ci12.0=0x0000079e
+    ddr3_tune_rd_dq_wl0_rn_ci10.0=0x83838383,0x83838383,0x8c8c8c8c,0x8c8c8c8c
+    ddr3_tune_wr_dq_wl1_ci4.0=0x93939393,0x93939393,0x94949494,0x94949494
+    ddr3_tune_wr_dq_ci8.0=0x80808080
+    ddr3_tune_rd_dq_wl1_rp_ci0.0=0x83838383,0x83838383,0x84848484,0x84848484
+    ddr3_tune_wr_dq_wl1_ci10.0=0x95959595,0x95959595,0x95959595,0x95959595
+    ddr3_tune_rd_dq_wl0_rn_ci8.0=0x8a8a8a8a,0x8a8a8a8a,0x89898989,0x89898989
+    ddr3_tune_rd_dq_wl1_rp_ci12.0=0x84848484,0x84848484,0x84848484,0x84848484
+    ddr3_tune_wr_dq_ci10.0=0x80808080
+    ddr3_tune_vref_ci8.0=0x000007df
+    ddr3_tune_rd_en_ci12.0=0x009c9c9d,0x00a0a29f
+    ddr3_tune_rd_data_dly_ci6.0=0x00000505
+    ddr3_tune_rd_dq_wl0_rp_ci4.0=0x83838383,0x83838383,0x81818181,0x81818181
+    ddr3_tune_rd_dqs_ci12.0=0x91919292,0x92929393
+    ddr3_tune_rd_dqs_ci0.0=0x96969292,0x91919191
+    ddr3_tune_rd_en_ci4.0=0x00979798,0x009c9e9a
+    ddr3_tune_rd_data_dly_ci10.0=0x00000505
+    ddr3_tune_addrc_ci0.0=0x000000ad
+    ddr3_tune_wr_dq_wl0_ci14.0=0x94949494,0x94949494,0x93939393,0x93939393
+    ddr3_tune_rd_dq_wl1_rn_ci6.0=0x89898989,0x89898989,0x8b8b8b8b,0x8b8b8b8b
+    ddr3_tune_addrc_ci12.0=0x000000b3
+    ddr3_tune_wr_dq_wl0_ci8.0=0x93939393,0x93939393,0x93939393,0x93939393
+    ddr3_tune_vref_ci14.0=0x0000079e
+    ddr3_tune_rd_dq_wl0_rn_ci12.0=0x83838383,0x83838383,0x83838383,0x83838383
+    ddr3_tune_wr_dq_wl1_ci6.0=0x94949494,0x94949494,0x94949494,0x94949494
+    ddr3_tune_rd_dq_wl1_rp_ci2.0=0x83838383,0x83838383,0x89898989,0x89898989
+    ddr3_tune_wr_dq_wl1_ci12.0=0x94949494,0x94949494,0x94949494,0x94949494
+    ddr3_tune_rd_dq_wl1_rp_ci14.0=0x81818181,0x81818181,0x83838383,0x83838383
+    ddr3_tune_wr_dq_ci12.0=0x80808080
+    ddr3_tune_wr_dq_ci0.0=0x80808080
+    ddr3_tune_rd_en_ci14.0=0x009f9f9f,0x00a2a4a1
+    ddr3_tune_rd_dq_wl0_rn_ci0.0=0x83838383,0x83838383,0x89898989,0x89898989
+    ddr3_tune_rd_data_dly_ci8.0=0x00000505
+    ddr3_tune_rd_dq_wl0_rp_ci6.0=0x80808080,0x80808080,0x8c8c8c8c,0x8c8c8c8c
+    ddr3_tune_rd_dqs_ci14.0=0x91919292,0x90909090
+    ddr3_tune_rd_dqs_ci2.0=0x90908f8f,0x95959090
+    ddr3_tune_rd_en_ci6.0=0x009c9d9b,0x009ea09d
+    ddr3_tune_rd_data_dly_ci12.0=0x00000505
+    ddr3_tune_vref_ci0.0=0x000007df
+    ddr3_tune_addrc_ci2.0=0x000000ae
+    ddr3_tune_rd_dq_wl1_rn_ci8.0=0x82828282,0x82828282,0x8b8b8b8b,0x8b8b8b8b
+    ddr3_tune_addrc_ci14.0=0x000000b0
+    ddr3_tune_rd_dq_wl1_rn_ci10.0=0x83838383,0x83838383,0x84848484,0x84848484
+    ddr3_tune_rd_dq_wl0_rn_ci14.0=0x83838383,0x83838383,0x83838383,0x83838383
+    ddr3_tune_wr_dq_wl1_ci8.0=0x93939393,0x93939393,0x94949494,0x94949494
+    ddr3_tune_rd_dq_wl1_rp_ci4.0=0x84848484,0x84848484,0x8c8c8c8c,0x8c8c8c8c
+    ddr3_tune_wr_dq_wl1_ci14.0=0x95959595,0x95959595,0x95959595,0x95959595
+    ddr3_tune_wr_dq_wl0_ci0.0=0x93939393,0x93939393,0x92929292,0x92929292
+    ddr3_tune_wr_dq_ci14.0=0x80808080
+    ddr3_tune_wr_dq_ci2.0=0x80808080
+    ddr3_tune_rd_dq_wl0_rn_ci2.0=0x81818181,0x81818181,0x84848484,0x84848484
+    ddr3_tune_rd_dq_wl0_rp_ci8.0=0x8a8a8a8a,0x8a8a8a8a,0x89898989,0x89898989
+    ddr3_tune_rd_dqs_ci4.0=0x8f8f9090,0x95959191
+    ddr3_tune_rd_en_ci8.0=0x00a0a0a0,0x009b9e99
+    ddr3_tune_rd_data_dly_ci14.0=0x00000505
+    ddr3_tune_vref_ci2.0=0x000007df
+    ddr3_tune_rd_dq_wl0_rp_ci10.0=0x83838383,0x83838383,0x8c8c8c8c,0x8c8c8c8c
+    ddr3_tune_rd_data_dly_ci0.0=0x00000505
+    ddr3_tune_addrc_ci4.0=0x000000af
+    ddr3_tune_rd_dq_wl1_rn_ci12.0=0x84848484,0x84848484,0x84848484,0x84848484
+    ddr3_tune_rd_dq_wl1_rn_ci0.0=0x83838383,0x83838383,0x84848484,0x84848484
+    ddr3_tune_rd_dq_wl1_rp_ci6.0=0x89898989,0x89898989,0x8b8b8b8b,0x8b8b8b8b
+    ddr3_tune_wr_dq_wl0_ci2.0=0x92929292,0x92929292,0x92929292,0x92929292
+    ddr3_tune_wr_dq_wl1_ci0.0=0x92929292,0x92929292,0x92929292,0x92929292
+    ddr3_tune_wr_dq_ci4.0=0x80808080
+    ddr3_tune_rd_dq_wl0_rn_ci4.0=0x83838383,0x83838383,0x81818181,0x81818181
+    ddr3_tune_rd_dqs_ci6.0=0x94948f8f,0x93939393
+    ddr3_tune_vref_ci4.0=0x0000079e
+    ddr3_tune_rd_dq_wl0_rp_ci12.0=0x83838383,0x83838383,0x83838383,0x83838383
+    ddr3_tune_rd_data_dly_ci2.0=0x00000404
+    ddr3_tune_addrc_ci6.0=0x000000ab
+    ddr3_tune_rd_dq_wl0_rp_ci0.0=0x83838383,0x83838383,0x89898989,0x89898989
+    ddr3_tune_rd_dq_wl1_rn_ci14.0=0x81818181,0x81818181,0x83838383,0x83838383
+    ddr3_tune_rd_en_ci0.0=0x009fa09f,0x00999b98
+    ddr3_tune_wr_dq_wl0_ci10.0=0x94949494,0x94949494,0x96969696,0x96969696
+    ddr3_tune_rd_dq_wl1_rn_ci2.0=0x83838383,0x83838383,0x89898989,0x89898989
+
+
+# Dram type: Select ONLY ONE of the following DRAM types, to configure all dram related parameteres per type.
+# Dram Type for Arad:
+dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_933=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_800=1
+#dram_type_DDR3_MICRON_MT41J256M16_4GBIT_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_933=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_800=1
+#dram_type_DDR3_MICRON_MT42J64M16LA_15E_667=1
+#dram_type_DDR3_SAMSUNG_K4B4G1646B_4GBIT_1066=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_933=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_800=1
+
+### Setting dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066 Parameters as Default:
+## All other dram types parameter resides in arad.soc. choosing another Dram Type will override the following parameters.
+ext_ram_t_rrd=6000
+ext_ram_columns=1024
+ext_ram_banks=8
+ext_ram_ap_bit_pos=10
+ext_ram_burst_size=32
+ext_ram_t_ref=3900000
+ext_ram_t_wr=15000
+ext_ram_t_wtr=7500
+ext_ram_t_rtp=7500
+ext_ram_freq=1066
+ext_ram_rows=16384
+ext_ram_jedec=29
+ext_ram_t_rc=46090
+ext_ram_t_rcd_rd=13090
+ext_ram_t_rcd_wr=13090
+ext_ram_t_rp=13090
+ext_ram_t_rfc=160000
+ext_ram_t_ras=33000
+ext_ram_c_wr_latency=10
+ext_ram_t_faw=35000
+ext_ram_c_cas_latency=14
+ddr3_mem_grade=0x141414
+
+# DRAM pre-configurations according to config variables which defines
+# Dram Type. supports only DDR3:
+ext_ram_type.BCM88650=DDR3
+
+# Total Dram Size (MBytes)
+# For 8 drams interfaces, 2 channel each, Each channel 2Gbit Dram. the total DRAM size is 32GBits=4000MBytes.
+ext_ram_total_size.BCM88650=4000
+
+# Total buffer size allocated for User buffer. Units: Mbytes. Default: '0x0'.
+# Supported suffix:
+#       dram - the buffer size will be subtracted from the DRAM size available for packet memory.
+#user_buffer_size=0
+#user_buffer_size_dram=50
+
+# DRAM ClamShell (interface swap its HW PIN pairs during init. Note: Only one of DRAMs can have its PIN swapped)
+# Valid values: 0/1
+#dram0_clamshell_enable.BCM88650=1
+#dram1_clamshell_enable.BCM88650=1
+
+# DRAM maximum number of crc error per buffer, buffer deleted by interrupt application.
+#dram_crc_del_buffer_max_reclaims=0
+
+### Warmboot ###
+## Scache initialization for warmboot persistent storage.
+#Save the warm boot data in a file. Allowed values: 3.
+#stable_location.BCM88650=3
+#Set the warm boot data filename.
+#stable_filename.BCM88650=./warmboot_data
+#Set the warm boot data file size (At least 10MB for PETRA-B, 4MB for ARAD)
+#stable_size.BCM88650=1000000000
+
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+## If set, always configures synthesizers, even if the configured rate is equal to
+## their nominal rate. Can be disabled to speedup bringup time (keep in mind that if
+## disabled, changing a synt to a non-nominal freq and than back to nominal will not
+## work
+#synt_over.BCM88650=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88650=100000000
+synt_ddr.BCM88650=125000000
+synt_phy.BCM88650=156250000
+synth_dram_freq.BCM88650=25
+
+#Configure the reference clock frequencies for NIF and Fabric SerDes
+# Options:  0 - 125MHZ, 1 - 156.25MHz
+serdes_nif_clk_freq.BCM88650=1
+serdes_fabric_clk_freq.BCM88650=1
+# IEEE 1588 -
+# configure clock (for 1588 debug, when Broadsync is disabled):
+#  DPLL mode/lock: 0 - eci ts pll clk disabled, 1 - configure eci ts pll clk
+#  DPLL phase/freq. Default initial: lo = 0x40000000, hi = 0x10000000.
+#phy_1588_dpll_frequency_lock.BCM88650=1
+#phy_1588_dpll_phase_initial_lo.BCM88650=0x40000000
+#phy_1588_dpll_phase_initial_hi.BCM88650=0x10000000
+# port external MAC
+#  indication whether external MAC exists or not.
+#  0: 1588 external MAC does not exist
+#  1: 1588 external MAC exists
+#  the external MAC substracts the RX time from the correction field
+#  and adds the TX time to the correction field.
+#ext_1588_mac_enable_14.BCM88650=1
+
+## Trill configurations
+# Trill mode: 0 (disabled) / 1 (coarse-grained) / 2 (fine-grained)
+#trill_mode.BCM88650=1
+
+# Trill multicast prunning mode:
+# 0: no prunning - vsi is not part of the key
+# 1: VSI prunning: Key is dist-tree,esadit-bit,VSI.
+trill_mc_prune_mode.BCM88650=0
+
+# Enable SA authentication
+#sa_auth_enabled=1
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88650=0
+logical_port_drop.BCM88650=1
+
+#logical_port_mim_in.BCM88650=2
+#logical_port_mim_out.BCM88650=4096
+
+# Enable EVB application
+#evb_enable=1
+
+# Enable Flexible QinQ application
+#vlan_translation_match_ipv4=1
+
+
+# Prepend tag to be 4 bytes or 8 bytes. Default: 4B.
+# Applicable only from ARAD+
+#prepend_tag_bytes=4B
+
+# The Prepend Tag is located at (12 + 2*offset) bytes from the start of the packet.
+# Range: 0-7. Default: 0
+#prepend_tag_offset=0
+
+# Enable ARP (next hop mac extension) feature
+bcm886xx_next_hop_mac_extension_enable.BCM88650=0
+
+# Set VLAN translate mode.
+# 0: normal
+# 1: advanced mode. Enable vlan edit settings with enhanced user control
+#bcm886xx_vlan_translate_mode=0
+
+# Set MPLS termination database mode
+# Set MPLS databases location for each MPLS namespace (L1,L2,L3)
+#bcm886xx_mpls_termination_database_mode=0
+
+# Enable , Disable MPLS indexed.
+# MPLS termination with known label stack location.
+# Must be enabled in case device supports more than 2 MPLS label terminations (L1,L2,L3)
+#mpls_termination_label_index_enable=1
+
+# Enable FastReRoute labels in device.
+#fast_reroute_labels_enable=0
+
+# Enable MPLS Context specific. Upstream label assignment in device.
+#mpls_context_specific_label_enable=0
+
+# MPLS context.
+# Can be global, per port , per interface or per port,interface.
+#mpls_context=global
+
+# MPLS TP MC reserved mac address (01-00-5E-90-00-00).
+# If set device will support My-MAC termination of reserved MC Ethernet
+#mpls_tp_mymac_reserved_address=0
+
+# MPLS ELI enable disable
+mpls_entropy_label_indicator_enable=0
+
+
+#########################################
+##cfg for BCM88640_A0 - Petra
+#########################################
+
+force_clk_m_n_divisors_zero_nif0.BCM88640_A0=0
+force_clk_m_n_divisors_zero_fabric0.BCM88640_A0=1
+force_clk_m_n_divisors_zero_comb0.BCM88640_A0=0
+
+combo_ref_clock.BCM88640=312500
+
+nif_ref_clock.BCM88640_A0=312500
+
+# Use variable cell size
+system_cell_format.BCM88640_A0=VCS128
+
+# Core clock speed (MHz)
+core_clock_speed.BCM88640_A0=300
+
+# Map bcm local port to CPU/NIF interfaces
+ucode_port_0.BCM88640_A0=CPU.0
+ucode_port_73.BCM88640_A0=CPU.1
+ucode_port_74.BCM88640_A0=CPU.2
+ucode_port_75.BCM88640_A0=CPU.3
+ucode_port_76.BCM88640_A0=CPU.4
+ucode_port_77.BCM88640_A0=CPU.5
+ucode_port_78.BCM88640_A0=CPU.6
+
+# Interlaken ports basic configuration (temporary).
+# This configuration replaces the above XAUI/RXAUI ports config
+# The following PB design constraint is not enforced in SW, so must be taken
+# care of here, when mapping ports to interfaces:
+#   If using ilkn0, port 1 (if used) must be mapped to ilkn0
+#   If using ilkn1, port 2 (if used) must be mapped to ilkn1
+#   Note that in our default mapping, port 2 is mapped to RXAUI 6, thus won't
+#   work. If one wants to use front panel port 2 with ilkn1, he should be map
+#   RAXUI6 to a port != 2.
+#ilkn_num_lanes_0.BCM88640_A0=12
+#ucode_port_1.BCM88640_A0=ILKN0.0
+#ucode_port_2.BCM88640_A0=ILKN0.1
+#ucode_port_3.BCM88640_A0=ILKN0.2
+#ilkn_num_lanes_1.BCM88640_A0=12
+#ucode_port_4.BCM88640_A0=RXAUI6
+#ucode_port_5.BCM88640_A0=ILKN1.0
+#ucode_port_6.BCM88640_A0=ILKN1.1
+#ucode_port_7.BCM88640_A0=ILKN1.2
+
+# Default header type is derived from fap_device_mode: If fap_device_mode is
+# PP, default header type is ETH. Otherwise, defualt header type is TM.
+# Header type per port can be overriden.
+# All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/INJECTED
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88640_A0=TM
+tm_port_header_type_in_0.BCM88640_A0=TM
+tm_port_header_type_out_0.BCM88640_A0=CPU
+tm_port_header_type_73.BCM88640_A0=TM
+tm_port_header_type_74.BCM88640_A0=TM
+tm_port_header_type_75.BCM88640_A0=TM
+tm_port_header_type_76.BCM88640_A0=TM
+tm_port_header_type_77.BCM88640_A0=TM
+tm_port_header_type_78.BCM88640_A0=TM
+# recycling port
+tm_port_header_type_40.BCM88640_A0=RAW
+ucode_port_40.BCM88640_A0=RCY.0
+
+# Enable ERP and OLP ports
+num_erp_tm_ports.BCM88640_A0=1
+num_olp_tm_ports.BCM88640_A0=1
+num_recycle_tm_ports.BCM88640_A0=1
+
+# Dram configuration
+# 600 Mhz
+ext_ram_pll_r.BCM88640_A0=4
+ext_ram_pll_f.BCM88640_A0=47
+ext_ram_pll_q.BCM88640_A0=1
+ext_ram_freq.BCM88640_A0=600
+
+# Dbuff size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88640_A0=1024
+
+# Number of external DRAMs.
+# Allowed values for 88x4x: 0/2/3/4/6.
+# Allowed values for 88650: 0/2/3/4/6/8.
+# ext_ram_total_size below assumed this value is 6 for 88x4x and 8 for
+ext_ram_present.BCM88640_A0=6
+
+# Dram type: Select ONLY ONE of the following DRAM types, to configure all dram
+# related parameteres per type.
+# Dram Type for Pb:
+dram_type_DDR3_MICRON_MT41J64M16_15E.BCM88640_A0=1
+#dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600.BCM88640_A0=1
+#dram_type_GDDR3_SAMSUNG_K4J52324QE.BCM88640_A0=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G.BCM88640_A0=1
+
+# QDR configuration
+# Parity. Allowed values: PARITY/ECC.
+ext_qdr_protection_type.BCM88640_A0=PARITY
+ext_qdr_size_mbit.BCM88640_A0=72
+#QDR type: QDR/QDR2P/QDR3/NONE.
+ext_qdr_type.BCM88640_A0=QDR
+
+# QDR can use the core clock, or using it's own pll. Current example is for 250MHz pll (if used).
+# QDR using own pll configuration
+#ext_qdr_use_core_clock_freq.BCM88640_A0=0
+#ext_qdr_pll_m.BCM88640_A0=4
+#ext_qdr_pll_n.BCM88640_A0=4
+#ext_qdr_pll_p.BCM88640_A0=0
+
+# QDR using core clock
+ext_qdr_use_core_clock_freq.BCM88640_A0=1
+
+#Configure MDIO. If parameter is not defined, MDIO is disabled.
+mdio_clock_freq_khz.BCM88640_A0=1000
+
+# Streaming interface configuration
+streaming_if_enable_timeoutcnt.BCM88640_A0=1
+streaming_if_timeout_prd.BCM88640_A0=70
+streaming_if_quiet_mode.BCM88640_A0=0
+streaming_if_discard_bad_parity.BCM88640_A0=0
+
+# maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88640_A0=0
+
+# multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_min.BCM88640_A0=0
+egress_multicast_direct_bitmap_max.BCM88640_A0=4095
+
+# configure flow mapping base to 0
+flow_mapping_queue_base.BCM88640_A0=0
+
+dtm_flow_mapping_mode_region_25.BCM88640_A0=0
+dtm_flow_mapping_mode_region_26.BCM88640_A0=0
+dtm_flow_mapping_mode_region_27.BCM88640_A0=0
+dtm_flow_mapping_mode_region_28.BCM88640_A0=0
+dtm_flow_mapping_mode_region_29.BCM88640_A0=0
+dtm_flow_mapping_mode_region_30.BCM88640_A0=0
+dtm_flow_mapping_mode_region_31.BCM88640_A0=0
+dtm_flow_mapping_mode_region_32.BCM88640_A0=0
+dtm_flow_mapping_mode_region_33.BCM88640_A0=1
+dtm_flow_mapping_mode_region_34.BCM88640_A0=1
+dtm_flow_mapping_mode_region_35.BCM88640_A0=1
+dtm_flow_mapping_mode_region_36.BCM88640_A0=1
+dtm_flow_mapping_mode_region_37.BCM88640_A0=1
+dtm_flow_mapping_mode_region_38.BCM88640_A0=1
+dtm_flow_mapping_mode_region_39.BCM88640_A0=1
+dtm_flow_mapping_mode_region_40.BCM88640_A0=1
+dtm_flow_mapping_mode_region_41.BCM88640_A0=1
+dtm_flow_mapping_mode_region_42.BCM88640_A0=2
+dtm_flow_mapping_mode_region_43.BCM88640_A0=2
+dtm_flow_mapping_mode_region_44.BCM88640_A0=2
+dtm_flow_mapping_mode_region_45.BCM88640_A0=2
+dtm_flow_mapping_mode_region_46.BCM88640_A0=2
+dtm_flow_mapping_mode_region_47.BCM88640_A0=2
+dtm_flow_mapping_mode_region_48.BCM88640_A0=2
+dtm_flow_mapping_mode_region_49.BCM88640_A0=2
+dtm_flow_mapping_mode_region_50.BCM88640_A0=2
+dtm_flow_mapping_mode_region_51.BCM88640_A0=2
+dtm_flow_mapping_mode_region_52.BCM88640_A0=2
+dtm_flow_mapping_mode_region_53.BCM88640_A0=2
+dtm_flow_mapping_mode_region_54.BCM88640_A0=2
+dtm_flow_mapping_mode_region_55.BCM88640_A0=2
+
+# Power up state (DOWN/UP/UP_AND_RELOCK). Can be configured per lane.
+pb_serdes_lane_power_state.BCM88640_A0=UP_AND_RELOCK
+
+# SeDes media type: Pre-configuration for tx params, according to
+# media type.
+# Allowed values: SHORT_BACKPLANE/LONG_BACKPLANE/CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type.BCM88640_A0=SHORT_BACKPLANE
+pb_serdes_lane_tx_phys_media_type_28.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_29.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_30.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_31.BCM88640_A0=CHIP2CHIP
+
+system_is_fe1600_in_system.BCM88640_A0=0
+
+# Counter engine configuration
+counter_engine_source_1.BCM88640_A0=0
+counter_engine_statistics_1.BCM88640_A0=4
+counter_engine_source_2.BCM88640_A0=1
+counter_engine_statistics_2.BCM88640_A0=4
+
+# Statistic Reporting
+stat_if_enable=0
+
+# Clock Phases: 0/90/180/270
+stat_if_phase=0
+
+# Rate in nm
+stat_if_sync_rate=0
+
+# TRUE/FALSE
+stat_if_parity_enable=FALSE
+
+# BILLING/FAP20V
+stat_if_report_mode=BILLING
+
+# Billing Mode
+# EGR_Q_NB/CUD/VSI_VLAN/BOTH_LIFS
+stat_if_report_billing_mode=VSI_VLAN
+
+# Fap20V Mode
+# QUEUE/PACKET
+stat_if_report_fap20v_mode=QUEUE
+
+# QUEUE_NUM/MC_ID (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_fabric_mc=QUEUE_NUM
+stat_if_report_fap20v_ing_mc=QUEUE_NUM
+
+# TRUE/FALSE (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_cnm_report=FALSE
+
+# TRUE/FALSE
+stat_if_report_fap20v_count_snoop=FALSE
+stat_if_report_original_pkt_size=FALSE
+stat_if_report_fap20v_single_copy_reported=FALSE
+
+schan_timeout_usec.BCM88640_A0=300000
+
+
+polled_irq_mode.BCM88640_A0=0
+polled_irq_delay.BCM88640_A0=1000
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88650: ENABLED
+# Options for 88640 compatible: DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY / 16B_STACKING_ROUTE_HISTORY
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88640=DISABLED
+
+#########################################
+##cfg for BCM88750
+#########################################
+
+fabric_device_mode.BCM88750=SINGLE_STAGE_FE2
+
+is_dual_mode.BCM88750=0
+system_is_vcs_128_in_system.BCM88750=0
+
+system_is_dual_mode_in_system.BCM88750=0
+system_is_single_mode_in_system.BCM88750=1
+
+system_is_fe600_in_system.BCM88750=0
+
+system_ref_core_clock_khz.BCM88750=600000
+
+fabric_merge_cells.BCM88750=0
+fabric_multicast_mode.BCM88750=DIRECT
+fabric_load_balancing_mode.BCM88750=NORMAL_LOAD_BALANCE
+fabric_tdm_fragment.BCM88750=0x180
+##Allows single pipe device to send TDM traffic over the fabric primary pipe - available for Fe1600_B0 only
+#change  vcs128_unicast_priority to be lower than 2 - when enabling
+fabric_tdm_over_primary_pipe.BCM88750=0
+fabric_optimize_partial_links.BCM88750=0
+vcs128_unicast_priority.BCM88750=2
+
+polled_irq_mode.BCM88750=0
+polled_irq_delay.BCM88750=1000
+
+#Selects if to run MBIST (Memory Built In Self Test) of internal memory (tables) during startup.
+#Supported values: 0=don't run, 1=run, 2=run with extra logs
+#bist_enable.BCM88650=1
+bist_enable.BCM88750=1
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88750=0
+load_firmware.BCM88750=2
+
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88750=2
+
+#enable\disable CL72
+port_init_cl72.BCM88750=0
+#Avaliable speeds for BCM88750: 5750, 6250, 10312, 11500, 12500
+port_init_speed.BCM88750=10312
+#LC PLL in\out 0=125MHz 1=156.25MHz
+serdes_fabric_clk_freq_in.BCM88750=1
+serdes_fabric_clk_freq_out.BCM88750=1
+serdes_mixed_rate_enable.BCM88750_B0=0
+
+# VSC128 or VSC256
+fabric_cell_format.BCM88750=VSC256
+
+# Core clock speed (MHz)
+core_clock_speed_khz.BCM88750=533333
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling,
+# SCHAN:
+schan_intr_enable.BCM88750=0
+schan_timeout_usec.BCM88750=300000
+# TDMA
+tdma_intr_enable.BCM88750=0
+tdma_timeout_usec.BCM88750=80000000
+# TSLAM
+tslam_intr_enable.BCM88750=0
+tslam_timeout_usec.BCM88750=80000000
+# MIIM
+miim_intr_enable.BCM88750=0
+miim_timeout_usec.BCM88750=300000
+
+
+##initialization for warmboot
+stable_location.BCM88750=3
+stable_size.BCM88750=200000
+scache_filename.BCM88750=fe1600_warmboot.mem
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+# Support (and configure on init) packet processing features.
+# If not defined - only traffic management capabilities are enabled.
+packet_processing=1
+
+## PCP (Petra Co-Processor) features
+#pcp_elk.BCM88640_A0=1
+#pcp_oam.BCM88640_A0=1
+#pcp_dma.BCM88640_A0=1
+
+## Set/Override TDM related config variables
+#tdm.BCM88640_A0=1
+
+# If set, always configures synthesizers, even if the configured rate is
+# equal to
+# their nominal rate. Can be disabled to speedup bringup time
+# (keep in mind that if disabled, changing a synt to a non-nominal freq and
+# than back to nominal will not work
+#synt_over.BCM88640_A0=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88640_A0=100000000
+synt_ddr.BCM88640_A0=125000000
+synt_phy.BCM88640_A0=156250000
+
+## Scache initialization for warmboot persistent storage.
+## Valid values: 2: Store in dram. 3: Store in a file.
+stable_location=3
+stable_filename=./warmboot_data
+stable_flags=0
+stable_size=1000000000
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88640=1
+logical_port_drop.BCM88640=-1
+
+#logical_port_mim_in.BCM88640=2
+#logical_port_mim_out.BCM88640=3
+
+## IPV6 tunnel
+bcm886xx_ipv6_tunnel_enable=1
+
+## Inlif Profile Management Mode - QoS L3 L2 marking mode
+#
+# BCM88660 ONLY
+#
+# QoS L3 L2 marking allows changing the DSCP and/or EXP values
+# of IP and/or MPLS packets according to the incoming port
+# (or inlif), and the Traffic Class/Drop Precedence.
+#
+# The inlif profile is used to control the DSCP/EXP marking.
+# This SOC property controls which mode is used for the inlif profile:
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the DSCP/EXP marking).
+# 0: Advanced mode (the user controls which inlif profile values perform DSCP/EXP marking directly).
+#bcm886xx_qos_l3_l2_marking=1
+
+## Unicast RPF mode per RIF
+#
+# This SOC property allows the user to set the unicast RPF mode - loose, strict or disabled - per RIF.
+# If disabled, the unicast RPF mode of a RIF is set globally.
+# Options: 0 / 1
+
+# bcm886xx_l3_ingress_urpf_enable=1
+
+## BOS handling mode
+# BCM8866X ONLY
+#
+# There are two ways to handle BOS, controlled by bcm886xx_mpls_termination_mode:
+# 0 - Use BOS as key in lookup.
+# 1 - Don't use it (except for reserved labels).
+#
+#bcm886xx_mpls_termination_key_mode=0
+
+# Color resolution mode allows the user to have more detailed metering color information.
+# BCM88660 ONLY
+#
+# Options: 0/1
+# 0: A red result from both Ethernet policer and policer implies DP=3.
+# 1: A red result from the policer implies that DP=2, while a red result from rate (Ethernet policer) implies DP=3.
+#policer_color_resolution_mode=1
+
+## Inlif Profile Management Mode - Disable Same Interface Filter
+# BCM8866X ONLY
+#
+# Controls which mode is used for the inlif profile management.
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the same-interface filter).
+# 0: Advanced mode (the user controls which inlif profile values have the same-interface filter disabled for them).
+#bcm886xx_logical_interface_bridge_filter_enable=1
+
+## Default Block Forwarding Strength
+#
+# Configure the default forwarding strength of blocks.
+#
+# SOC Properties:
+#block_trap_strength_vtt - VTT block forwarding strength
+#block_trap_strength_flp - FLP block forwarding strength
+#block_trap_strength_hash - SLB block forwarding strength (BCM8866X ONLY)
+#block_trap_strength_pmf_0 - PMF 1st lookup forwarding strength
+#block_trap_strength_pmf_1 - PMF 2nd lookup forwarding strength
+#
+# Options: 0-7
+
+## Stateful Load Balancing
+# BCM8866X ONLY
+#
+# Stateful Load Balancing (SLB) allows the load balancing of ECMP and LAG
+# groups to become stateful.
+# In standard load balancing, removing a member from the ECMP/LAG
+# group may affect the selected member, since the formula
+# depends on group size.
+# In stateful load balancing the member is selected once and saved.
+# Later, the member is always retrieved, and does not depend on
+# the size of the LAG/ECMP group.
+#
+# resilient_hash_enable - Enable/disable SLB. Values:
+# 1 - Enable SLB.
+# 0 - Disable SLB.
+#resilient_hash_enable=1
+
+
+#Make Arad SOC properties work for Arad+, by mapping the BCM88660 suffix to BCM88650
+soc_family.BCM88660=BCM88650
+#Make Arad SOC properties work for Ardon, by mapping the BCM88202 suffix to BCM88650
+soc_family.BCM88202=BCM88650
+
+# Use different mymac addresses for ipv4 and ipv6 when using vrrp for mymac termination.
+#l3_vrrp_ipv6_distinct=1
+
+# Enable multiple mymac termination mode. In order to enable it, also set 
+# l3_vrrp_ipv6_distinct=0 and l3_vrrp_max_vid=0 since vrrp and
+# multiple mymac mode can't co exist.
+#l3_multiple_mymac_termination_enable=1
+
+# Distinguish between ipv4 and all other l3 protocols when multiple mymac terminating 
+#l3_multiple_mymac_termination_mode=1
+
+# Usually the final DP given by the meter (or the In-DP) is unchanged, and can be from 0-3.
+# When this SOC property is set to 1, when the final INGRESS DP is 2, it is mapped to 1 instead, 
+# and thus only the values 0-1 and 3 can be output.
+# This has no effect when policer_color_resolution_mode=1.
+#custom_feature_always_map_result_dp_2_to_1=1
+
+############################
+### Warmboot & SW State ####
+############################
+
+
+ha_hw_journal_size=15728640
+ha_sw_journal_size=15728640
+ha_crash_recovery=1
+
+
+# stable_size - a strict bound on the application's external storage size
+stable_size.BCM88650=281000000
+stable_size=420000000
+
+# determine the memory size pre-allocated for the SDK's SW State
+sw_state_max_size.BCM88650=160000000
+sw_state_max_size=350000000
+
+# stable location
+## part of scache initialization for warmboot persistent storage.
+## values: 1-2:Not Valid for dnx 3: Store in a file  4: Use Shared Mem.
+# 4 is the preffered option, using 3 for Arad and FE in order to regress both modes.
+ stable_location.BCM88650=3
+ stable_location.BCM88660=3
+
+#
+# Enable L3 Source Binds for DPoE SAV
+#
+l3_source_bind_mode=IP
+l3_source_bind_subnet_mode=IP
+ipv4_num_vrfs = 4096
+
+#
+# Enable ARP checking for L3 Source Binds
+#
+# This feature is not currently used.
+#
+# Valid values for custom_feature_l3_source_bind_arp_relay:
+#    0 - disabled
+#    1 - downstream ARP checking
+#    2 - upstream ARP checking
+#    3 - both downstream and upstream ARP checking
+#
+#custom_feature_l3_source_bind_arp_relay=2
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/arad/rc.soc b/bal_release/3rdparty/bcm-sdk/rc/arad/rc.soc
new file mode 100755
index 0000000..12003a3
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/arad/rc.soc
@@ -0,0 +1,1811 @@
+# $Id: rc.soc,v 1.192 Broadcom SDK $
+# $Copyright: Copyright 2016 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+# Initialization RC (run commands) file
+#
+#       These are default commands that are read and executed by default
+#       when BCM boots up.  Typically this file is called rc.soc and resides
+#       in the flash filesystem, NVRAM, or disk.
+#
+# Board Configuration Setting
+#
+#       This file uses configuration properties to know on which board
+#       it is running.  Currently one of following settings must be made:
+#
+#       BCM95670K8          config add herc8=1
+#       BCM95690K24         config add draco_b2b=1
+#       BCM95690K24S        config add draco_stk=1
+#       BCM95690R24         config add galahad=1
+#       BCM95690R24S        config add merlin=1
+#       BCM95690R48S        config add lancelot=1
+#       BCM95691K12         config add draco_k12=1
+#       White Knight        config add white_knight=1 (not shipping)
+#       Black Knight        config add black_knight=1 (not shipping)
+#       BCM95673K2S         config add twolynx=1
+#       BCM95673R8          config add herculynx=1
+#       BCM95673R24S        config add lynxalittle=1
+#       BCM95673R48S        config add lynxalot=1
+#       BCM95695P24SX_10    config add guenevere=1
+#       BCM95650K24         config add magnum=1 (automatic for 5650L)
+#       BCM95675            config add herc8_15=1
+#       BCM95650R24         config add tuc24_ref=1
+#       BCM95695P48LM       config add lm48p=1
+#       BCM95695P48LM-10    config add lm48p_B=1
+#       BCM956504P48LM-10   config add lm48p_C=1
+#       BCM956504P48LM-20   config add lm48p_C=1
+#       BCM956504P48LM-50   config add lm48p_D=1
+#       BCM956504P48POEREF  config add fbpoe=1
+#       BCM956504P24REF P0  config add fb24=1
+#       BCM956504P24    P0  config add fb24=1
+#       BCM956102P48        config add felix48=1
+#       BCM953300P24REF     config add mirage24=1
+#       BCM956800K20C       config add bradley_1g=1
+#       BCM956700K16        config add humv=1
+#       BCM956800K20        config add bradley=1
+#       BCM956580K16        config add goldwing=1
+#       BCM956314P24REF     config add bcm56314p24ref=1
+#       BCM956024P48REF     config add BCM956024P48REF=1
+#       BCM956224P48REF     config add BCM956224P48REF=1
+#       BCM956224R50T       config add BCM956224R50T=1
+#       BCM956024R50T       config add BCM956024R50T=1
+#       BCM56820K24XG       config add BCM56820K24XG=1
+#       BCM953314R24GS      config add BCM953314R24GS=1
+#       BCM953314K24        config add BCM953314K24=1
+#       BCM956820R24XG      config add BCM956820R24XG=1
+#       BCM956160R          config add bcm956160r=1
+
+if $?BCM56146_A0 \
+    'local BCM56146 1'
+
+if $?BCM56147_A0 \
+    'local BCM56147 1'
+
+
+if $?1 "echo rc: arguments not supported; exit"
+if !$?unit "echo rc: no current unit; exit"
+
+echo "rc: unit $unit device $devname"
+local quiet no
+local echo echo
+local rcdone \$rc$unit
+if !"expr $rcdone + 0" "local echo noecho; local quiet yes"
+
+# Set convenience local variables
+
+# simulation related
+#if $?plisim \
+#       "local no_bcm 1"
+if $?quickturn || $?plisim \
+	"local simulator 1"
+
+# board related
+if $?galahad \
+	"local draco_b2b 1"
+if $?black_knight || $?white_knight || $?merlin \
+	"local draco_herc4 1"
+
+# chip related
+if $?PETRAB_A0 \
+    'rcload dune.soc ; exit'
+
+#if $?QUX_A0 \
+#    'echo blablabla;der 0x40 4 ; exit'
+
+if $?FLAIR_A0 \
+    'echo blablabla;der 0x40 4 ; exit'
+
+if $?BCM88750_A0 || $?BCM88750_B0 || $?BCM88753_A0 || $?BCM88753_B0 || $?BCM88752_A0 || $?BCM88752_B0 ||  $?BCM88755_B0 || $?BCM88754_A0 || $?BCM88770_A1 || $?BCM88773_A1 || $?BCM88774_A1 || $?BCM88775_A1 || $?BCM88776_A1 || $?BCM88950_A0 || $?BCM88950_A1 || $?BCM88953_A1 || $?BCM88954_A1 || $?BCM88955_A1 || $?BCM88956_A1 || $?BCM88952_A0 || $?BCM88952_A1 || $?BCM88772_A1 \
+    'rcload dfe.soc ; exit'
+
+if $?ARAD_A0 || $?ARAD_B0 || $?ARAD_B1 || $?ARADPLUS_A0 || $?BCM88650_A0 || $?BCM88650_B0 || $?BCM88650_B1 || $?BCM88652_A0 || $?BCM88652_B0 || $?BCM88350_B1 || $?BCM88351_B1 || \
+   $?BCM88450_B1 || $?BCM88451_B1 || $?BCM88550_B1 || $?BCM88551_B1 || $?BCM88552_B1 || $?BCM88651_B1 || $?BCM88654_B1 || $?BCM88660_A0 || $?BCM88360_A0 || $?BCM88361_A0 || $?BCM88363_A0 ||\
+   $?BCM88460_A0 || $?BCM88461_A0 || $?BCM88560_A0 || $?BCM88561_A0 || $?BCM88562_A0 || $?BCM88661_A0 || $?BCM88664_A0  \
+    'rcload arad.soc ;  rcload rpc.soc ; exit'
+
+if $?BCM88850_P3 \
+    'exit'
+
+if $?QAX_A0 || $?BCM88470P_A0 || $?BCM88470_A0 || $?BCM88470M_A0 || $?BCM88471P_A0 || $?BCM88471_A0 || $?BCM88472_A0 || \
+ $?BCM88473_A0 || $?BCM88471D_A0 || $?BCM88476P_A0 || $?BCM88476_A0 || $?BCM88476D_A0 || $?BCM88476T_A0 || $?BCM88477_A0  \
+    'setenv QAX 1'
+    
+if $?QUX_A0 || $?BCM88270_A0 \
+    'setenv QUX 1'
+
+if $?JERICHO_A0 ||  $?BCM88670_A0 || $?BCM88671_A0 || $?BCM88671M_A0 || $?BCM88672_A0 || $?BCM88673_A0 || $?BCM88674_A0 || $?BCM88675_A0 || $?BCM88675M_A0 || $?BCM88676_A0 || $?BCM88676M_A0 || $?BCM88678_A0 || $?BCM88679_A0 || \
+   $?JERICHO_A1 ||  $?BCM88670_A1 || $?BCM88671_A1 || $?BCM88671M_A1 || $?BCM88672_A1 || $?BCM88673_A1 || $?BCM88674_A1 || $?BCM88675_A1 || $?BCM88675M_A1 || $?BCM88676_A1 || $?BCM88676M_A1 || $?BCM88678_A1 || $?BCM88679_A1 || \
+   $?QMX_A0     ||  $?BCM88370_A0 || $?BCM88371_A0 || $?BCM88371M_A0 || $?BCM88375_A0 || $?BCM88376_A0 || $?BCM88376M_A0 || $?BCM88377_A0 || $?BCM88378_A0 || $?BCM88379_A0 || \
+   $?QMX_A1     ||  $?BCM88370_A1 || $?BCM88371_A1 || $?BCM88371M_A1 || $?BCM88375_A1 || $?BCM88376_A1 || $?BCM88376M_A1 || $?BCM88377_A1 || $?BCM88378_A1 || $?BCM88379_A1 || \
+   $?JERICHO_B0 ||  $?BCM88670_B0 || $?BCM88671_B0 || $?BCM88671M_B0 || $?BCM88672_B0 || $?BCM88673_B0 || $?BCM88674_B0 || $?BCM88675_B0 || $?BCM88675M_B0 || $?BCM88676_B0 || $?BCM88676M_B0 || $?BCM88678_B0 || $?BCM88679_B0 || $?BCM88680_A0 || \
+   $?QMX_B0     ||  $?BCM88370_B0 || $?BCM88371_B0 || $?BCM88371M_B0 || $?BCM88375_B0 || $?BCM88376_B0 || $?BCM88376M_B0 || $?BCM88377_B0 || $?BCM88378_B0 || $?BCM88379_B0 || $?BCM88379_A1 || \
+   $?JERPLUS    ||  $?BCM88680_A0 ||  $?BCM88682_A0 || $?BCM88683_A0 ||  $?BCM88381_A0 || $?BCM88382_A0 || $?BCM88385_A0 || $?BCM88686_A0 \
+    'rcload jer.soc ; exit'
+
+if $?QAX || $?QUX\
+    'rcload qax.soc ; exit'
+
+
+if $?BCM88202_A0 || $?ARDON_A0 || $?BCM88202_A1 || $?ARDON_A1 || $?BCM88202_A2 || $?ARDON_A2\
+    'rcload atmf.soc ; exit'
+
+if $?ACP \
+    'exit'
+
+if $?BCM88690_A0\
+    'exit'
+        
+if !"expr $pcidev + 0 == 0x5650" \
+	"local magnum 1"
+if $?drac || $?drac15 \
+	"local drac_any 1"
+if $?lynx || $?lynx15 \
+	"local lynx_any 1"
+if $?tucana || $?magnum \
+	"local tucana_any 1"
+if $?herc || $?herc15 \
+	"local herc_any 1"
+if $?firebolt || $?firebolt2 || $?helix || \
+   $?felix || $?helix15 || $?felix15 || $?raptor || $?raven || $?hawkeye\
+	"local firebolt_any 1"
+if !"expr $pcidev + 0 == 0xb501" \
+	"local firebolt_10x4 1"
+if $?easyrider \
+	"local easyrider_any 1"
+if !"expr $pcidev + 0 == 0xb602" \
+	"local easyrider_1x1 1"
+if $?bradley || $?humv || $?goldwing \
+	"local bradley_any 1"
+if $?drac_any || $?lynx_any || $?tucana_any \
+	"local xgs12_switch 1"
+if $?firebolt_any || $?easyrider_any || $?bradley_any \
+	"local xgs3_switch 1"
+if $?xgs12_switch || $?xgs3_switch \
+	"local xgs_switch 1"
+if $?herc_any \
+	"local xgs_fabric 1"
+if $?xgs_fabric || $?xgs_switch \
+	"local xgs 1"
+if !$?xgs \
+	"local strata 1"
+if $?strata && !$?gsl \
+	"local PBMP_ALL 0x0bffffff"
+if $?strata && $?gsl \
+	"local PBMP_ALL 0x080000ff"
+if $?BCM56214_A0 || $?BCM56014_A0 || $?BCM56215_A0 || \
+   $?BCM56214_A1 || $?BCM56014_A1 || $?BCM56215_A1 && \
+   !$?BCM956024P48REF \
+	"local rap24_ref 1"
+
+if $?BCM5655_A0 || $?BCM5655_B0 \
+        "local tucana_nohg 1"
+
+if $?BCM956024P48REF || $?BCM956224P48REF || $?BCM956024R50T || \
+   $?BCM956224R50T \
+        "local raven_eb_48p 1"
+
+if $?BCM953314R24GS \
+        "local hawkeye_p24 1"
+
+if $?BCM953314K24 \
+        "local hawkeye_k24 1"
+
+if $?firebolt_any && $?lm48p || $?lm48p_D \
+        "config add lmfb48=1"
+
+# Set software's wait for S-Channel response to 3 seconds for QuickTurn
+# (Recommend at least 10 seconds if the ARL is 100% busy with inserts.)
+if $?quickturn	"stimeout 3000000"
+if $?plisim	"stimeout 60000000"
+
+# Direct phy led programming: 5464 activity led becomes link/activity
+if $?drac_any && $?lancelot || $?lynxalot || $?guenevere \
+	"config add phy_led_ctrl=0x18"
+
+# Shutdown threads if system is already running
+if $?triumph3 \
+	"ibodSync off"
+counter off
+linkscan off
+if $?feature_arl_hashed && !$?simulator \
+        "l2mode off"
+if $?feature_ces && $?BCM56440_A0 \
+        "ces off"
+
+# Test on-chip memory before initializing
+#if !$?simulator "init soc; bist l3 arl cbp"
+init soc
+
+# Initialize miscellaneous chip registers
+init misc
+
+# Initialize external TCAM if necessary
+# NOTE : tcam is initialized during "init misc" unless 
+#        tcam_reset_toggle = 1 is configured
+if "expr $rcdone + 0" && !"expr $tcam_reset_toggle + 0" \
+        "dispatch attach 0 esw 0"
+if !"expr $tcam_reset_toggle + 0" "muxsel 0; muxsel 0x80"
+if !"expr $tcam_reset_toggle + 0" "init tcam; $echo rc: TCAM initialized"
+
+# Initialize the StrataSwitch MMU registers
+init mmu
+if $?katana2 \
+   kt2config.soc
+
+
+# Uncomment to turn off Single-Bit Error reporting on 5670
+#if $?herc "m mmu_intcntl pp_sbe_en=0"
+
+# Initialize Cell Free Address Pool
+# NOTE: this should NOT be done unless chip is known to have bad CFAP
+# memory entries that need to be mapped out.
+if $?cfap_tests "$echo rc: Initializing CFAP; cfapinit"
+
+$echo rc: MMU initialized
+
+#
+# Load uKernel
+#
+
+# Pick default FW names if not set already by config
+if !$?fw_core_0 \
+    'local fw_core_0 ${fw_prefix}_0_bfd_bhh.srec; \
+     if $?greyhound || $?hurricane2 || $?hurricane3 "local fw_core_0 ${fw_prefix}_0_ptpfull.srec"; \
+     if $?caladan3 "local fw_core_0 ${fw_prefix}_0.srec"; \
+     if $?helix4 && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?helix4 && $?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd_bhh.srec"; \
+     if $?tomahawk && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?trident2plus && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+    '
+
+if !$?fw_core_1 \
+   'local fw_core_1 ${fw_prefix}_1_ptpfull.srec; \
+    if $?caladan3 "local fw_core_1 ${fw_prefix}_1_bs.srec"; \
+   '
+
+if !$?fw_core_2 \
+   "local fw_core_2 ${fw_prefix}_2_eth_lmdm.srec"
+
+# Load the firmwares
+if $?feature_cmicm && !$?rcpu_only && !$ihost_mode && !$?feature_iproc \
+    "mcsload 0 ${fw_core_0} InitMCS=true; \
+     mcsload 1 ${fw_core_1};"
+
+if $?hurricane2 \
+   "mcsload 0 ${fw_core_0} InitMCS=true;"
+
+if $?feature_iproc && !$?hurricane2 && !$?hurricane3 && !$?rcpu_only && !$?feature_uc_mhost && !$ihost_mode\
+    "mcsload 0 ${fw_core_0} InitMCS=true TwoStage=true TwoStageAddr=0x60000000;\
+     mcsload 1 ${fw_core_1} TwoStage=true TwoStageAddr=0x6002c000;"
+
+if $?feature_iproc && !$?rcpu_only && $?feature_uc_mhost && $?num_ucs\
+    'if !"expr $num_ucs > 0" "mcsload 0 ${fw_core_0} InitMCS=true"; \
+     if !"expr $num_ucs > 1" "mcsload 1 ${fw_core_1}"; \
+     if !"expr $num_ucs > 2" "mcsload 2 ${fw_core_2}";'
+
+#
+# Init CLI and BCM API
+#
+# This must be done after the raw register writes to avoid having state
+# clobbered.  NOTE: Tables are cleared by "init bcm" below.  If
+# table modifications are required, put them after "init bcm".  Some
+# registers might also be affected.
+#
+
+if !$?no_bcm \
+	"init bcm; \
+	 $echo rc: BCM driver initialized"
+
+if $?no_bcm \
+	"$echo rc: *** NOT initializing BCM driver ***"
+
+if $?no_bcm && $?strata \
+    'write vtable 0 1 VLAN_TAG=0,PORT_BITMAP=0,UT_PORT_BITMAP=0; \
+     insert vtable VLAN_TAG=1,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+     local pv \
+         VLAN_TAG=1,SP_ST=3,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+	 write ptable 0 32 PTYPE=0; \
+	 if !$?gsl "write ptable 0 24 $pv,PTYPE=1"; \
+	 if !$?gsl "write ptable 24 2 $pv,PTYPE=2"; \
+	 if $?gsl  "write ptable 0 8 $pv,PTYPE=2"; \
+	 write ptable 27 1 $pv,PTYPE=3; \
+     local pv'
+
+# Turn on mirroring of hardware ARL operations into software ARL table.
+if $?feature_arl_sorted \
+	"arlmode intr_dma; \
+	 $echo rc: ARL DMA shadowing enabled"
+
+if $?feature_arl_hashed && !$?simulator && !$?rcpu_only \
+	"l2mode interval=3000000; \
+	 $echo rc: L2 Table shadowing enabled"
+
+# If running BCM library, start linkscan task and set port modes
+
+if !$?no_bcm && !$?rcpu_only \
+	"linkscan 250000; \
+	 port fe,ge linkscan=on autoneg=on \
+		speed=0 fullduplex=true txpause=true rxpause=true; \
+	 port st linkscan=on txpause=false rxpause=false; \
+         port xe,ce linkscan=on autoneg=off \
+                speed=0 fullduplex=true txpause=true rxpause=true; \
+         port hg linkscan=on fullduplex=true txpause=false rxpause=false; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?rcpu_only \
+	"linkscan 250000; \
+	 port e linkscan=on; \
+	 port st linkscan=on; \
+     port xe linkscan=on; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?shadow \
+     "port il linkscan=on; \
+	  $echo rc: Interlaken Port mode initialized"
+
+# Selectively re-enable Auto Negotiation based on config port_force_an_list.
+#if $?port_force_an_list \
+#    "port $port_force_an_list autoneg=on"
+
+# No spanning tree is running, so put ports all in the forwarding state
+# stp support not available for shadow device.
+
+if !$?no_bcm && !$?shadow \
+	"stg stp 1 all forward"
+
+# Start counter task unless already started by "init bcm" above.
+if $?plisim "local dma false"
+if !$?plisim "local dma true"
+if $?device_eb_vli "local dma false"
+if $?no_bcm && !$?rcpu_only\
+	"counter Interval=1000 Pbm=all Dma=$dma; \
+	 $echo rc: Counter collection enabled"
+if $?rcpu_only \
+	"counter Interval=2000000 Pbm=all Dma=false; \
+	 $echo rc: Counter collection enabled"
+
+# Resynchronize the saved values kept by the 'show counter' command.
+if !$?simulator \
+    "counter sync"
+
+# By default, dump data of packets that go to CPU.
+if !$?testinit \
+	"pw report +raw"
+
+# Default LED processor program for various SDKs and reference designs.
+# Source code can be found in $SDK/led/examples.
+
+if !$?p48 "local ledcode '\
+ E0 28 60 7F 67 2F 67 6B 06 7F 80 D2 1A 74 01 12 \
+ 7E 85 05 D2 0F 71 19 52 00 12 7D 85 05 D2 1F 71 \
+ 23 52 00 12 7C 85 05 D2 05 71 2D 52 00 3A 68 32 \
+ 00 97 75 3B 12 A0 FE 7F 02 0A 50 32 01 97 75 47 \
+ 12 BA FE 7F 02 0A 50 12 BA FE 7F 95 75 59 85 12 \
+ A0 FE 7F 95 75 A8 85 77 9A 12 A0 FE 7F 95 75 63 \
+ 85 77 A1 16 7C DA 02 71 A1 77 A8 32 05 97 71 76 \
+ 06 7D D2 01 71 9A 06 7F 67 93 75 9A 32 02 97 71 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 7E D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5605.hex
+
+if $?p48 "local ledcode '\
+ E0 28 60 7F 67 43 67 3C 67 35 67 2F 06 7F 80 D2 \
+ 18 74 01 28 60 7F 67 9B 67 89 67 BF 67 83 67 3C \
+ 67 73 67 68 67 5D 06 7F 80 D2 1A 74 13 3A 70 67 \
+ AD 71 C3 77 BF 32 03 97 71 C3 77 BF 32 05 97 71 \
+ C3 77 BF 12 BA FE 7F 32 01 97 75 4F 02 06 50 32 \
+ 00 97 75 57 02 06 50 95 75 C3 85 77 BF 67 AD 75 \
+ BF 32 04 97 71 C3 77 BF 67 AD 75 BF 32 03 97 71 \
+ C3 77 BF 67 AD 75 BF 32 03 97 71 BF 32 04 97 71 \
+ BF 77 C3 67 B6 71 C3 77 BF 12 A0 FE 7F 32 00 97 \
+ 75 95 02 06 50 95 75 C3 85 77 BF 12 BA FE 7F 32 \
+ 01 97 75 A7 02 06 50 95 75 C3 85 77 BF 06 7F 12 \
+ 80 F8 15 1A 00 57 06 7F 12 80 F8 15 1A 07 57 32 \
+ 0F 87 57 32 0E 87 57'"					# p48.hex
+
+if $?herc && !$?black_knight "local ledcode '\
+ 02 01 67 36 29 32 08 D7 87 32 07 D7 87 32 01 D7 \
+ 87 32 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 \
+ 74 24 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 \
+ 87 91 74 2D 3A 28 10 DA 07 75 3E FA 02 57 EA 06 \
+ 57'"							# sdk5670.hex
+
+if $?herc && $?black_knight "local ledcode '\
+ 2A 03 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 00 \
+ D7 87 2A 06 32 08 D7 87 32 07 D7 87 32 01 D7 87 \
+ 32 00 D7 87 3A 08'"					# knigget.hex
+
+if $?drac_any "local ledcode '\
+ E0 28 60 C3 67 4E 67 8A 06 C3 80 D2 0C 74 01 28 \
+ 60 C3 32 00 D7 87 32 01 D7 87 32 07 D7 87 32 08 \
+ D7 87 32 0F 87 32 0F 87 32 0F 87 32 0F 87 12 C2 \
+ 85 05 D2 0F 71 38 52 00 12 C1 85 05 D2 1F 71 42 \
+ 52 00 12 C0 85 05 D2 05 71 4C 52 00 3A 38 32 00 \
+ 97 75 5A 12 A0 FE C3 02 0A 50 32 01 97 75 66 12 \
+ AD FE C3 02 0A 50 12 AD FE C3 95 75 78 85 12 A0 \
+ FE C3 95 75 C0 85 77 B9 12 A0 FE C3 95 75 82 85 \
+ 77 C7 16 C0 DA 02 71 C7 77 C0 32 05 97 71 9A 32 \
+ 02 97 71 B9 06 C1 D2 01 71 B9 06 C3 67 B2 75 B9 \
+ 32 03 97 71 C0 32 04 97 75 C7 06 C2 D2 07 71 C7 \
+ 77 C0 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5690.hex
+
+if $?draco_k12 "local ledcode '\
+ 02 0B A2 01 28 A2 01 60 C3 67 32 67 6E 06 C3 90 \
+ 75 02 12 C2 85 05 D2 0F 71 1C 52 00 12 C1 85 05 \
+ D2 1F 71 26 52 00 12 C0 85 05 D2 05 71 30 52 00 \
+ 3A 30 32 00 97 75 3E 12 A0 FE C3 02 0A 50 32 01 \
+ 97 75 4A 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 \
+ 5C 85 12 A0 FE C3 95 75 A6 85 77 9F 12 A0 FE C3 \
+ 95 75 66 85 77 AD 16 C0 DA 02 71 AD 77 A6 32 05 \
+ 97 71 7E 32 02 97 71 9F 06 C1 D2 01 71 9F 06 C3 \
+ 67 96 75 9F 32 03 97 71 A6 32 04 97 75 AD 06 C2 \
+ D2 07 71 AD 77 A6 12 80 A2 01 F8 15 1A 00 57 32 \
+ 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 \
+ 32 0E 87 57'"						# k12-5690.hex
+
+if $?herc && $?white_knight "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 07 \
+ D7 87 32 01 D7 87 32 00 D7 87 57'"			# wk5670.hex
+
+if $?herc && $?merlin "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"			# merlin5670.hex
+
+if $?herc && $?lancelot "local ledcode '\
+ 2A 05 67 12 2A 06 67 12 2A 03 67 12 2A 04 67 12 \
+ 3A 10 32 08 D7 87 32 00 D7 87 32 01 D7 87 32 07 \
+ D7 87 57'"						# lancelot.hex
+
+if $?xgs_fabric && $?guenevere "local ledcode '\
+ 2A 04 67 0A 2A 05 67 0A 3A 04 32 07 D7 87 32 00 \
+ 32 01 B7 D7 87 57'"                                    # guenevere5670.hex
+
+if $?drac_any && $?white_knight "local ledcode '\
+ E0 28 60 C3 67 2f 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# wk5690.hex
+
+if $?drac_any && $?merlin "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# merlin5690.hex
+
+if $?drac_any && $?galahad "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# galahad.hex
+
+if $?drac_any && $?lm "local ledcode '\
+E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+32 0F 87 57 32 0F 87 32 0E 87 57'"      # lm5690.hex
+
+if $?twolynx "local ledcode '\
+ 2A 01 67 0A 2A 00 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"                 # twolynx.hex
+
+if $?lynx_any && $?herculynx || $?lynxalot || $?lm || $?guenevere \
+	"local ledcode '\
+12 C0 85 05 D2 03 71 0A 52 00 2A 00 67 10 3A 04 \
+32 08 D7 87 06 C0 D2 01 71 22 32 0F 87 32 0F 87 \
+77 2A 32 00 D7 87 32 01 D7 87 32 07 D7 87 57'"      # herculynx.hex
+
+if $?tucana && !$?magnum "local ledcode '\
+ E0 67 23 D2 18 74 01 02 20 67 23 D2 38 74 09 02 \
+ 18 67 23 D2 1C 74 11 E9 02 80 45 80 81 DA 0D 74 \
+ 1A 3A 68 28 60 E3 67 4A 67 36 06 E4 30 87 06 E5 \
+ 30 87 06 E3 80 57 32 00 97 71 45 32 01 97 71 45 \
+ 02 0F 60 E5 57 02 0E 60 E5 57 06 E3 12 A0 F8 15 \
+ 1A 00 75 59 02 0E 60 E4 57 02 0F 60 E4 57'"        # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC 67 5A 67 9C 06 FA 67 DA 06 FB 67 DA \
+ 06 FC 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0E 74 51 3A 70 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 D7 85 77 D1 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 D4 16 FF DA 02 02 FA 71 D4 77 D7 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 D1 06 FC 67 CA 02 FB 75 \
+ D1 32 02 97 71 D1 32 03 97 71 D7 32 04 97 75 D4 \
+ 06 FD D2 07 02 FB 71 D4 77 D7 12 A0 F8 15 1A 00 \
+ 57 42 00 57 42 01 57 42 02 57 D2 02 74 E3 32 0F \
+ 87 77 E6 32 0E 87 D2 01 74 EE 32 0F 87 57 32 0E \
+ 87 57'"                                            # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 75 09 A2 01 60 FC 28 67 37 67 73 \
+ 06 FB 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 3A 70 32 00 97 75 43 12 C0 FE FC \
+ 02 0A 50 32 01 97 75 4F 12 DC FE FC 02 0A 50 12 \
+ DC FE FC 95 75 61 85 12 C0 FE FC 95 75 B0 85 77 \
+ A2 12 C0 FE FC 95 75 6B 85 77 A9 16 FF DA 02 71 \
+ A9 77 B0 32 05 97 71 7E 06 FE D2 01 71 A2 06 FC \
+ 67 9B 75 A2 32 02 97 71 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 FD D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0F 87 32 0F 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57'"                            # magnum_sdk.hex
+
+if $?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 71 10 60 FC 28 67 D0 67 C0 77 19 \
+ A2 01 60 FC 28 67 40 67 7C 06 FB 80 D2 1C 74 01 \
+ 12 FD 85 05 D2 0F 71 2A 52 00 12 FE 85 05 D2 1F \
+ 71 34 52 00 12 FF 85 05 D2 05 71 3E 52 00 3A 68 \
+ 32 00 97 75 4C 12 C0 FE FC 02 0A 50 32 01 97 75 \
+ 58 12 DC FE FC 02 0A 50 12 DC FE FC 95 75 6A 85 \
+ 12 C0 FE FC 95 75 B9 85 77 AB 12 C0 FE FC 95 75 \
+ 74 85 77 B2 16 FF DA 02 71 B2 77 B9 32 05 97 71 \
+ 87 06 FE D2 01 71 AB 06 FC 67 A4 75 AB 32 02 97 \
+ 71 AB 32 03 97 71 B9 32 04 97 75 B2 06 FD D2 07 \
+ 71 B2 77 B9 12 A0 F8 15 1A 00 57 32 0F 87 32 0F \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 \
+ 02 0E 32 00 97 71 CD 32 01 97 71 CD 80 30 87 57 \
+ 06 FC 12 A0 F8 15 1A 00 02 0F 75 DD 90 30 87 57'"  # magnum.hex
+
+if $?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC D2 18 71 0E 67 E9 67 D9 77 1A 67 5A \
+ 67 9C 06 FA 67 D0 06 FB 67 D0 06 FC 80 D2 1C 74 \
+ 01 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0D 74 51 3A 68 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 CD 85 77 C7 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 CA 16 FF DA 02 02 FA 71 CA 77 CD 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 C7 06 FC 67 C0 02 FB 75 \
+ C7 32 02 97 71 C7 32 03 97 71 CD 32 04 97 75 CA \
+ 12 A0 F8 15 1A 00 57 42 FF 57 42 FE 57 42 EF 57 \
+ 30 87 98 98 98 98 30 87 57 02 0E 32 00 97 71 E6 \
+ 32 01 97 71 E6 80 30 87 57 06 FC 12 A0 F8 15 1A \
+ 00 02 0F 75 F6 90 30 87 57'"                       # tuc24_ref.hex
+
+if $?herc8_15 "local ledcode '\
+ 02 01 28 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 \
+ 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 74 22 \
+ 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 87 91 \
+ 74 2B 3A 28'"                                      # sdk5675.hex
+
+if $?drac_any && $?lm "local ledcode '\
+ E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+ 00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+ 75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+ C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+ A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+ C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+ 71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+ 71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57 00 00 00 00 00'"  # lm5690.hex
+
+if $?drac_any && $?lm48p "local ledcode '\
+ E0 28 60 C3 67 7C 06 C3 80 28 60 C3 67 7C 67 40 \
+ 06 C3 90 28 60 C3 67 40 06 C3 80 80 D2 0C 74 01 \
+ 12 C2 85 05 D2 0F 71 2A 52 00 12 C1 85 05 D2 1F \
+ 71 34 52 00 12 C0 85 05 D2 05 71 3E 52 00 3A 30 \
+ 32 00 97 75 4C 12 A0 FE C3 02 0A 50 32 01 97 75 \
+ 58 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 6A 85 \
+ 12 A0 FE C3 95 75 B9 85 77 AB 12 A0 FE C3 95 75 \
+ 74 85 77 B2 16 C0 DA 02 71 B2 77 B9 32 05 97 71 \
+ 8C 32 02 97 71 AB 06 C1 D2 01 71 AB 06 C3 67 A4 \
+ 75 AB 32 03 97 71 B9 32 04 97 75 B2 06 C2 D2 07 \
+ 71 B2 77 B9 12 80 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695.hex
+
+if $?drac_any && $?lm48p_B "local ledcode '\
+ E0 28 60 C3 67 79 06 C3 67 3D 06 C3 80 28 60 C3 \
+ 67 3D 06 C3 67 79 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 27 52 00 12 C1 85 05 D2 1F 71 31 52 \
+ 00 12 C0 85 05 D2 05 71 3B 52 00 3A 30 32 00 97 \
+ 75 49 12 A0 FE C3 02 0A 50 32 01 97 75 55 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 67 85 12 A0 FE \
+ C3 95 75 B6 85 77 A8 12 A0 FE C3 95 75 71 85 77 \
+ AF 16 C0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 C1 D2 01 71 A8 06 C3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 C2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695_10.hex
+
+if $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 55 67 91 06 E3 80 28 60 E3 67 91 \
+ 67 55 06 E3 80 D2 18 74 01 28 60 E3 67 B9 75 26 \
+ 67 CE 67 55 77 2E 32 0E 87 32 08 87 67 C0 06 E3 \
+ 80 D2 1C 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 3A 70 32 00 97 75 61 12 A0 FE E3 02 0A \
+ 50 32 01 97 75 6D 12 BC FE E3 02 0A 50 12 BC FE \
+ E3 95 75 7F 85 12 A0 FE E3 95 75 CE 85 77 C0 12 \
+ A0 FE E3 95 75 89 85 77 C7 16 E0 DA 02 71 C7 77 \
+ CE 32 05 97 71 A1 32 02 97 71 C0 06 E1 D2 01 71 \
+ C0 06 E3 67 B9 75 C0 32 03 97 71 CE 32 04 97 75 \
+ C7 06 E2 D2 07 71 C7 77 CE 12 80 F8 15 1A 00 57 \
+ 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F \
+ 87 32 0E 87 57'"  # sdk56504.hex
+
+#Led program for new rev of FB SDK and Ref design
+if $?firebolt_any && !$?fb24 "local ledcode '\
+ E0 28 60 E3 67 4B 67 87 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AF 75 1C 67 C4 67 4B 77 24 32 0E 87 32 \
+ 08 87 67 B6 06 E3 80 D2 1C 74 0F 12 E2 85 05 D2 \
+ 0F 71 35 52 00 12 E1 85 05 D2 1F 71 3F 52 00 12 \
+ E0 85 05 D2 05 71 49 52 00 3A 70 32 00 97 75 57 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 63 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 75 85 12 A0 FE E3 95 \
+ 75 C4 85 77 B6 12 A0 FE E3 95 75 7F 85 77 BD 16 \
+ E0 DA 02 71 BD 77 C4 32 05 97 71 97 32 02 97 71 \
+ B6 06 E1 D2 01 71 B6 06 E3 67 AF 75 B6 32 03 97 \
+ 71 C4 32 04 97 75 BD 06 E2 D2 07 71 BD 77 C4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56504ref.hex
+
+#Override Default Firebolt LED program for Line Module
+if $?lm && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 79 06 E3 67 3D 06 E3 80 28 60 E3 \
+ 67 3D 06 E3 67 79 06 E3 80 D2 18 74 01 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 60 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B6 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AF 16 E0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 E2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # lm48p56504.hex
+
+#Override Default Firebolt LED program for Line Module -50 version
+if $?lm && $?lm48p_D && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 6D 06 E3 67 31 06 E3 80 D2 18 74 \
+ 01 12 E2 85 05 D2 0F 71 1B 52 00 12 E1 85 05 D2 \
+ 1F 71 25 52 00 12 E0 85 05 D2 05 71 2F 52 00 3A \
+ 60 32 00 97 75 3D 12 A0 FE E3 02 0A 50 32 01 97 \
+ 75 49 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 5B \
+ 85 12 A0 FE E3 95 75 AA 85 77 9C 12 A0 FE E3 95 \
+ 75 65 85 77 A3 16 E0 DA 02 71 A3 77 AA 32 05 97 \
+ 71 7D 32 02 97 71 9C 06 E1 D2 01 71 9C 06 E3 67 \
+ 95 75 9C 32 03 97 71 AA 32 04 97 75 A3 06 E2 D2 \
+ 07 71 A3 77 AA 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'" # lm48p56504_50.hex
+
+if $?lm && $?firebolt_10x4 "local ledcode '\
+ 02 18 28 32 07 67 1E 75 0A D7 87 32 01 D7 87 32 \
+ 00 D7 87 32 08 D7 87 80 D2 1C 74 02 3A 0C 12 80 \
+ F8 15 1A 00 57 '" # lm12pcx456501.hex
+
+if $?fbpoe && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 85 67 49 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AD 75 1A 67 C2 77 20 32 0E 87 32 08 87 \
+ 67 49 06 E3 80 D2 1A 74 0F 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 32 00 97 75 55 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 61 12 BA FE E3 02 0A \
+ 50 12 BA FE E3 95 75 73 85 12 A0 FE E3 95 75 C2 \
+ 85 77 B4 12 A0 FE E3 95 75 7D 85 77 BB 16 E0 DA \
+ 02 71 BB 77 C2 32 05 97 71 95 32 02 97 71 B4 06 \
+ E1 D2 01 71 B4 06 E3 67 AD 75 B4 32 03 97 71 C2 \
+ 32 04 97 75 BB 06 E2 D2 07 71 BB 77 C2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'" # poe48p56504.hex
+
+#Override Default Firebolt LED program for felix
+if $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0E 87 32 0F 87 57'"  # sdk56102.hex
+
+#Override Default Felix LED program for felix48
+if $?felix48 && $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'"  # felix48.hex
+
+if $?easyrider_any "local ledcode '\
+ E0 28 60 E3 67 59 67 95 06 E3 80 28 60 E3 67 95 \
+ 67 59 06 E3 80 D2 0C 74 01 28 60 E3 67 BD 75 26 \
+ 67 D2 67 59 77 2E 32 0E 87 32 08 87 67 C4 06 E3 \
+ 80 D2 0D 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 67 C4 67 C4 3A 38 32 00 97 75 65 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 71 12 AD FE E3 02 0A \
+ 50 12 AD FE E3 95 75 83 85 12 A0 FE E3 95 75 D2 \
+ 85 77 C4 12 A0 FE E3 95 75 8D 85 77 CB 16 E0 DA \
+ 02 71 CB 77 D2 32 05 97 71 A5 32 02 97 71 C4 06 \
+ E1 D2 01 71 C4 06 E3 67 BD 75 C4 32 03 97 71 D2 \
+ 32 04 97 75 CB 06 E2 D2 07 71 CB 77 D2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'"   # sdk56601.hex
+
+#Override Default Easyrider LED program for 56602
+if $?easyrider_1x1 "local ledcode '\
+ E0 60 E1 67 7C 67 7C 06 E1 80 D2 0C 74 01 02 0C \
+ 28 60 E1 67 75 75 1D 67 8A 67 39 77 25 32 0E 87 \
+ 32 08 87 67 7C 06 E1 D2 00 02 00 74 10 12 E0 85 \
+ 05 D2 05 71 37 52 00 3A 38 32 00 97 75 45 12 A0 \
+ FE E1 02 0A 50 32 01 97 75 51 12 AD FE E1 02 0A \
+ 50 12 AD FE E1 95 75 63 85 12 A0 FE E1 95 75 8A \
+ 85 77 7C 12 A0 FE E1 95 75 6D 85 77 83 16 E0 DA \
+ 02 71 83 77 8A 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'"   # sdk56602.hex
+
+#Override Default  LED program for 53300
+if $?mirage24 "local ledcode '\
+ E0 28 60 E3 67 6B 67 2F 06 E3 80 D2 18 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A2 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 9E 16 E0 DA 02 71 9E 77 A2 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A2 32 04 97 75 9E 06 E2 D2 07 71 \
+ 9E 77 A2 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E \
+ 87 57 32 0E 87 57'"  # sdk53300.hex
+
+#Override Default LED program for 56314
+if $?bcm56314p24ref "local ledcode '\
+ E0 28 60 E3 67 79 67 3D 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 79 67 A8 06 E3 80 D2 1C 74 0F 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 38 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B0 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AC 16 E0 DA 02 71 AC 77 B0 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B0 32 04 97 75 AC 06 E2 D2 07 71 AC 77 \
+ B0 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ 32 0E 87 57'"  # bcm956314p24ref.hex
+
+if $?bradley "local ledcode '\
+ E0 28 60 F2 67 1B 06 F2 80 D2 14 74 01 86 F3 12 \
+ F0 85 05 D2 05 71 19 52 00 3A 28 32 00 97 75 27 \
+ 12 A8 FE F2 02 0A 50 32 01 97 75 33 12 BC FE F2 \
+ 02 0A 50 12 BC FE F2 95 75 45 85 12 A8 FE F2 95 \
+ 75 91 85 77 57 12 A8 FE F2 95 75 4F 85 77 8A 16 \
+ F0 DA 02 71 8A 77 91 06 F2 12 94 F8 15 02 02 C1 \
+ 74 6E 02 04 C1 74 6E 02 08 C1 74 6E 77 74 C6 F3 \
+ 74 91 77 8A 06 F2 67 7C 75 83 77 91 12 80 F8 15 \
+ 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 \
+ 57 32 0F 87 32 0E 87 57'"     # sdk56800.hex
+
+if $?humv "local ledcode '\
+ E0 28 60 F2 67 21 06 F2 80 D2 08 74 0F F2 02 D2 \
+ 12 74 01 86 F3 12 F0 85 05 D2 05 71 1F 52 00 3A \
+ 20 32 00 97 75 2D 12 A8 FE F2 02 0A 50 32 01 97 \
+ 75 39 12 BA FE F2 02 0A 50 12 BA FE F2 95 75 4B \
+ 85 12 A8 FE F2 95 75 97 85 77 5D 12 A8 FE F2 95 \
+ 75 55 85 77 90 16 F0 DA 02 71 90 77 97 06 F2 12 \
+ 94 F8 15 02 02 C1 74 74 02 04 C1 74 74 02 08 C1 \
+ 74 74 77 7A C6 F3 74 97 77 90 06 F2 67 82 75 89 \
+ 77 97 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56700.hex
+
+if $?bradley_1g "local ledcode '\
+ E0 28 60 E3 67 2F 67 6B 06 E3 80 D2 14 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 50 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 B4 FE E3 02 0A 50 12 B4 FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A8 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 A1 16 E0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 E2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 '"  # sdk56800c.hex
+
+if $?goldwing "local ledcode '\
+ E0 28 60 F3 D2 10 75 0E 67 3B 67 94 77 12 67 94 \
+ 67 3B 06 F3 80 D2 14 74 01 86 F4 12 F2 85 05 D2 \
+ 0F 71 25 52 00 12 F1 85 05 D2 1F 71 2F 52 00 12 \
+ F0 85 05 D2 05 71 39 52 00 3A 50 32 00 97 75 47 \
+ 12 A8 FE F3 02 0A 50 32 01 97 75 53 12 BC FE F3 \
+ 02 0A 50 12 BC FE F3 95 75 65 85 12 A8 FE F3 95 \
+ 75 C0 85 77 77 12 A8 FE F3 95 75 6F 85 77 B9 16 \
+ F0 DA 02 71 B9 77 C0 06 F3 12 94 F8 15 02 02 C1 \
+ 74 8E 02 04 C1 74 8E 02 08 C1 74 8E 77 B2 C6 F4 \
+ 74 C0 77 B9 06 F3 67 AB 75 B2 32 04 75 B2 32 03 \
+ 97 71 C0 06 F2 D2 07 71 B9 77 C0 12 80 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 '"                          # sdk56580.hex
+
+if $?humv && $?lm "local ledcode '\
+ 02 04 28 D2 08 74 0A F2 02 28 32 07 67 29 75 11 \
+ D7 87 60 E4 67 30 06 E4 60 E4 67 4C 06 E4 32 08 \
+ D7 87 80 D2 12 74 02 3A 30 12 80 F8 15 1A 00 57 \
+ 06 E4 12 94 F8 15 02 10 C1 70 42 12 D2 FE E4 02 \
+ 0A 50 12 D2 FE E4 95 75 6D 85 77 68 06 E4 12 94 \
+ F8 15 02 20 C1 70 5E 12 C0 FE E4 02 0A 50 12 C0 \
+ FE E4 95 75 6D 85 77 68 32 0E D7 87 57 32 0F D7 \
+ 87 57 '"                                         # lm12p56802.hex
+
+
+if $?raptor "local ledcode '\
+ 02 06 28 60 FF 67 64 67 93 06 FF 80 D2 36 74 02 \
+ 02 04 28 60 FF 67 BB 75 1E 32 0E 87 77 21 32 0F \
+ 87 67 7D 06 FF 80 D2 06 74 12 02 01 28 60 FF 67 \
+ BB 75 38 32 0E 87 77 3B 32 0F 87 67 7D 06 FF 80 \
+ D2 03 74 2C 12 FE 85 05 D2 0F 71 4E 52 00 12 FD \
+ 85 05 D2 1F 71 58 52 00 12 FC 85 05 D2 05 71 62 \
+ 52 00 3A C8 32 01 97 75 76 32 00 97 75 C9 16 FC \
+ DA 02 71 C9 77 D0 32 00 97 75 C2 77 D0 32 00 97 \
+ 75 86 32 0E 87 57 32 01 97 75 8F 32 0E 87 57 32 \
+ 0F 87 57 32 05 97 71 A3 32 02 97 71 C2 06 FD D2 \
+ 01 71 C2 06 FF 67 BB 75 C2 32 03 97 71 D0 32 04 \
+ 97 75 C9 06 FE D2 07 71 C9 77 D0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" # sdk56018.hex
+
+if $?raptor && $?rap24_ref "local ledcode '\
+ 02 06 60 E1 67 48 67 31 06 E1 80 D2 1E 71 02 02 \
+ 05 60 E1 67 48 67 31 06 E1 90 D2 03 74 11 02 02 \
+ 60 E1 67 48 67 31 06 E1 90 D2 00 74 20 86 E0 3A \
+ 38 06 E1 67 50 75 57 28 32 00 32 01 B7 97 75 57 \
+ 16 E0 CA 05 74 5B 77 57 06 E1 67 50 75 57 77 5B \
+ 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00'" # sdk56214.hex
+
+if $?raven_eb_48p "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 71 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024p48ref.hex
+
+if $?BCM956024R50T "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 75 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024r50t.hex
+
+if $?scorpion || $?conqueror "local ledcode '\
+ 02 18 28 60 E1 67 12 06 E1 90 D2 00 74 02 86 E0 \
+ 3A 18 67 2D 75 34 28 32 00 32 01 B7 97 75 38 16 \
+ E0 CA 05 74 38 77 34 67 2D 75 34 77 38 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 \
+ 00 00 00'" #sdk56820.hex
+
+if $?scorpion && $?BCM956820R24XG "local ledcode '\
+ 02 01 28 67 D0 02 02 28 67 D6 67 D0 02 01 28 67 \
+ D6 02 04 28 67 D0 02 03 28 67 D6 67 D0 02 04 28 \
+ 67 D6 02 05 28 67 D0 02 06 28 67 D6 67 D0 02 05 \
+ 28 67 D6 02 07 28 67 D0 02 08 28 67 D6 67 D0 02 \
+ 07 28 67 D6 02 09 28 67 D0 02 0A 28 67 D6 67 D0 \
+ 02 09 28 67 D6 02 0C 28 67 D0 02 0B 28 67 D6 67 \
+ D0 02 0C 28 67 D6 02 0D 28 67 D0 02 0E 28 67 D6 \
+ 67 D0 02 0D 28 67 D6 02 0F 28 67 D0 02 10 28 67 \
+ D6 67 D0 02 0F 28 67 D6 02 11 28 67 D0 02 12 28 \
+ 67 D6 67 D0 02 11 28 67 D6 02 14 28 67 D0 02 13 \
+ 28 67 D6 67 D0 02 14 28 67 D6 02 15 28 67 D0 02 \
+ 16 28 67 D6 67 D0 02 15 28 67 D6 02 17 28 67 D0 \
+ 02 18 28 67 D6 67 D0 02 17 28 67 D6 86 E0 3A 30 \
+ 67 F1 75 F8 77 FC 67 F1 75 F8 28 32 00 32 01 B7 \
+ 97 75 F8 16 E0 CA 05 74 FC 77 F8 67 F1 75 F8 77 \
+ FC 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ '" #bcm956820r24xg.hex
+
+if $?valkyrie "local ledcode '\
+ 02 02 67 A9 67 94 02 03 67 A9 67 94 02 05 67 A9 \
+ 67 94 02 04 67 A9 67 94 02 06 67 A9 67 94 02 07 \
+ 67 A9 67 94 02 12 67 A9 67 94 02 13 67 A9 67 94 \
+ 02 0E 67 A9 67 94 02 0F 67 A9 67 94 02 11 67 A9 \
+ 67 94 02 10 67 A9 67 94 02 1A 67 A9 67 94 02 20 \
+ 67 A9 67 94 02 21 67 A9 67 94 02 22 67 A9 67 94 \
+ 02 23 67 A9 67 94 02 24 67 A9 67 94 02 2F 67 A9 \
+ 67 94 02 2E 67 A9 67 94 02 1B 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56680.hex
+
+if $?valkyrie2 "local ledcode '\
+ 02 1E 67 A9 67 94 02 1F 67 A9 67 94 02 21 67 A9 \
+ 67 94 02 20 67 A9 67 94 02 22 67 A9 67 94 02 23 \
+ 67 A9 67 94 02 24 67 A9 67 94 02 25 67 A9 67 94 \
+ 02 26 67 A9 67 94 02 27 67 A9 67 94 02 29 67 A9 \
+ 67 94 02 28 67 A9 67 94 02 2A 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 02 2E 67 A9 67 94 02 2F 67 A9 67 94 02 31 67 A9 \
+ 67 94 02 30 67 A9 67 94 02 32 67 A9 67 94 02 33 \
+ 67 A9 67 94 02 34 67 A9 67 94 02 35 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56685.hex
+
+if $?hawkeye_p24 "local ledcode '\
+ 02 01 28 60 E3 67 43 67 1C 06 E3 80 D2 19 74 02 \
+ 12 E0 85 05 D2 03 71 1A 52 00 3A 60 32 00 32 01 \
+ B7 97 75 2B 12 E4 FE E3 02 01 50 12 E4 FE E3 95 \
+ 75 3B 85 06 E3 67 55 75 6A 77 5C 16 E0 DA 01 71 \
+ 6A 77 5C 06 E3 67 55 75 6A 32 03 97 71 5C 32 04 \
+ 97 75 6A 77 63 12 A0 F8 15 1A 00 57 32 0E 87 32 \
+ 0F 87 57 32 0F 87 32 0E 87 57 32 0F 87 32 0F 87 \
+ 57'"  #bcm953314p24ref.hex
+
+if $?hawkeye_k24 "local ledcode '\
+ 02 01 28 60 E1 67 3D 67 1C 06 E1 80 D2 19 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 30 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 50 16 E0 DA 02 71 4C 77 50 06 E1 67 \
+ 45 75 50 77 4C 12 A0 F8 15 1A 00 57 32 0E 87 57 \
+ 32 0F 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #bcm953314k24.hex
+
+if !"expr $pcidev + 0 == 0xb624" "local ledcode '\
+ 02 1C 28 67 18 02 1D 28 67 18 02 1E 28 67 18 02 \
+ 1F 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56624.hex
+
+if !"expr $pcidev + 0 == 0xb626" "local ledcode '\
+ 02 1A 28 67 22 02 1B 28 67 22 02 1C 28 67 22 02 \
+ 1D 28 67 22 02 1E 28 67 22 02 1F 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56626.hex
+
+if !"expr $pcidev + 0 == 0xb628" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56628.hex
+
+if !"expr $pcidev + 0 == 0xb629" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56629.hex
+
+if !"expr $pcidev + 0 == 0xb634" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb630" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb636" "local ledcode '\
+ 02 2A 28 67 22 02 32 28 67 22 02 1A 28 67 22 02 \
+ 1B 28 67 22 02 1C 28 67 22 02 1D 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56636.hex
+
+if !"expr $pcidev + 0 == 0xb638" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56638.hex
+
+if !"expr $pcidev + 0 == 0xb639" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56639.hex
+
+if !"expr $pcidev + 0 == 0xb334" "local ledcode '\
+ 02 02 28 60 E1 67 3D 67 1C 06 E1 80 D2 1E 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 38 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 4C 16 E0 DA 02 71 50 77 4C 06 E1 67 \
+ 45 75 4C 77 50 12 A0 F8 15 1A 00 57 32 0F 87 57 \
+ 32 0E 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #sdk56334.hex
+
+if $?apollo "local ledcode '\
+ 02 1E 28 60 E0 67 58 67 73 06 E0 80 28 60 E0 67 \
+ 73 67 58 06 E0 80 D2 36 74 02 02 1A 28 60 E0 67 \
+ 9B 75 29 67 B0 67 58 77 31 32 0E 87 32 08 87 67 \
+ A2 06 E0 80 D2 1E 74 1C 12 E2 85 05 D2 0F 71 42 \
+ 52 00 12 E1 85 05 D2 1F 71 4C 52 00 12 E3 85 05 \
+ D2 05 71 56 52 00 3A 70 32 00 97 75 64 32 01 97 \
+ 71 6B 77 B0 32 01 97 71 A9 77 A2 16 E3 DA 02 71 \
+ A9 77 B0 32 05 97 75 83 32 02 97 71 A2 06 E1 D2 \
+ 01 71 A2 06 E0 67 9B 75 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 E2 D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" #sdk56524.hex
+
+if $?tomahawk "local ledcode '\
+ 02 00 28 60 E1 67 25 67 14 06 E1 80 D2 40 74 02 \
+ 86 E0 3A FC 28 32 00 32 01 B7 97 75 37 16 E0 CA \
+ 05 74 3E 77 37 67 2B 75 37 77 45 12 A0 F8 15 1A \
+ 00 57 28 32 07 97 57 32 0E 87 32 0E 87 57 32 0F \
+ 87 32 0E 87 57 32 0E 87 32 0F 87 57 00 00 00 00'" #sdk56960.hex
+
+if $?trident2plus "local ledcode '\
+ 02 01 28 60 E1 67 31 67 20 06 E1 80 D2 31 74 02 \
+ 86 E0 3A C0 67 37 75 1C 67 51 77 20 67 43 77 43 \
+ 28 32 00 32 01 B7 97 75 43 16 E0 CA 05 74 4A 77 \
+ 43 67 37 75 43 77 51 12 A0 F8 15 1A 00 57 28 32 \
+ 07 97 57 32 0E 87 32 0E 87 57 32 0F 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 00 00 00 00 00 00 00 00'" #sdk56860.hex
+
+if $?apache "local ledcode '\
+ 02 00 67 24 67 0F 80 D2 24 74 02 86 E0 3A F8 67 \
+ 34 75 16 77 1D 57 67 3C 75 62 77 44 57 67 3C 75 \
+ 4E 77 58 57 67 2C 75 62 77 70 07 57 07 12 A0 F8 \
+ 15 1A 00 57 07 12 A0 F8 15 1A 04 57 07 12 A0 F8 \
+ 15 1A 05 57 16 E0 CA 1E 74 69 77 62 07 57 16 E0 \
+ CA 1E 74 70 77 62 07 57 16 E0 CA 1E 74 69 77 70 \
+ 07 57 32 0E 87 32 0E 87 57 32 0F 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 00 00 00 00 00 00 00 00 00'" #sdk56560.hex
+
+if $?generic8led "local ledcode '\
+ 06 E1 D2 40 71 11 E0 60 E1 16 E3 DA 01 71 15 60 \
+ E3 67 5D 75 2B 12 01 61 E3 67 71 28 67 32 86 E0 \
+ 16 E2 81 61 E2 DA 1E 75 2B 3A 08 E9 61 E2 86 E1 \
+ 77 00 67 5D 75 38 77 3C 67 64 77 64 67 41 67 4F \
+ 57 28 32 01 97 75 64 16 E0 CA 05 74 68 77 64 28 \
+ 32 00 97 75 64 16 E0 CA 05 74 68 77 64 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 09 75 64 77 \
+ 68 12 05 67 6C 12 04 67 6C 12 03 67 6C 12 02 67 \
+ 6C 12 01 67 6C 12 00 67 6C 57 00 00 00 00 00 00'" #generic8led.hex
+
+# Download LED code into LED processor and enable (if applicable).
+
+if $?feature_led_proc && $?ledcode && !$?simulator \
+	"led prog $ledcode; \
+	 led auto on; led start"
+
+# Setup Greyhound LED processor
+if $?greyhound \
+    "rcload gh_ledup.soc"
+
+# Setup Hurricane3 LED processor
+if $?hurricane3 \
+    "rcload hr3_led.soc"
+
+# Setup Tomahawk LED processor
+if $?tomahawk && !$?simulator \
+    "led 1 prog $ledcode; \
+     led 1 auto on; led 1 start; \
+     led 2 prog $ledcode; \
+     led 2 auto on; led 2 start"
+
+# If loading multiple rc.soc, upon loading the last unit, restart
+# all LED processors so any common blinking is in sync.
+
+if !"expr $?feature_led_proc && !$?simulator && $unit == $units - 1" \
+	"*:led stop; *:led start"
+
+# Run counter DMA task 4 times per second to achieve better
+# ctr_xaui_activity.
+if $?bradley_any \
+        "ctr interval=250000"
+
+# Initialize Hercules UC modid 0 entry to point to the CPU
+if $?herc_any \
+	"w uc 0 1 1"
+
+# Additional configuration for 48-port in Stacking mode.
+# On the 48-port platform, rc.soc is run twice; once on unit 0 and
+# then once on unit 1.  The turbo port on unit N is geN.
+# All turbo port traffic must be tagged; see vlan add below.
+# See $SDK/doc/48-port.txt for more information including how
+# to configure IPG values for line rate operation.
+
+if $?p48 && $?unit0 \
+	"local turbo_port 0; local my_modid 1;"
+
+if $?p48 && $?unit1 \
+	"local turbo_port 1; local my_modid 2;"
+
+if $?p48 \
+	"m config st_is_mirr=0 st_module=1 st_mcnt=1 st_simplex=0 st_link=0; \
+	 m config.g$turbo_port st_link=1; \
+	 m gmacc2.ge$turbo_port ipgt=8 mclkfq=1; \
+	 m fe_maxf maxfr=1560; \
+	 m maxfr maxfr=1568; \
+	 m config2 my_modid=$my_modid; \
+	 port ge$turbo_port speed=2500; \
+	 vlan add 1 pbm=ge$turbo_port ubm=none"
+
+if !$?no_bcm && $?drac_any \
+   "m modport_7_0 port_for_mod1=0xc"
+if !$?no_bcm && $?lynx_any \
+   "m modport_7_0 port_for_mod1=0x1"
+if !$?no_bcm && $?tucana \
+   "stkmode modid=0;"
+if !$?no_bcm && $?tucana && !$?magnum && !$?tucana_nohg \
+   "m modport_7_0 port_for_mod2=0x38; \
+    m imodport_7_0 port_for_mod0=0 port_for_mod1=0 port_for_mod2=0x38; \
+    stkmode modid=0"
+if !$?no_bcm && $?xgs_switch && !$?rcpu_only\
+   "stkmode modid=0; \
+    s CMIC_COS_CTRL_RX CH0_COS_BMP=0,CH1_COS_BMP=0xff, \
+        CH2_COS_BMP=0,CH3_COS_BMP=0"
+
+# Back-to-back Draco setup.
+
+# Draco chips must run at 127MHz. Some older versions
+# are not set to this frequency.
+
+if $?draco_stk && $?unit0 \
+    "i2c probe quiet; bb clock Ref125 127"
+
+# Applies to SDK Baseboard with either internal or external Higigs,
+# as well as the Galahad reference design.
+
+if $?draco_b2b && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if !$?simulator && $?draco_b2b && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_b2b && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Merlin, White Knight, Black Knight setup.
+#	Draco unit 1 is on Herc port 8
+#	Draco unit 2 is on Herc port 1
+
+if $?draco_herc4 && $?unit0 \
+    "w uc.hpic7 0 1 0x0; \
+     w uc.hpic7 1 1 0x2; \
+     w uc.hpic0 0 1 0x100; \
+     w uc.hpic0 1 1 0x0"
+
+if !$?simulator && $?draco_herc4 && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_herc4 && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if $?draco_herc4 && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Lancelot setup
+# (enabled by adding the property "lancelot=1")
+# Notes:
+#	Draco unit 1 is on Herc port 7
+#	Draco unit 2 is on Herc port 8
+#	Draco unit 3 is on Herc port 1
+#	Draco unit 4 is on Herc port 2
+
+if $?lancelot && $?unit0 \
+    "w uc.hpic6 0 1 0x0; \
+     w uc.hpic6 1 1 0x100; \
+     w uc.hpic6 2 1 0x2; \
+     w uc.hpic6 3 1 0x4; \
+     w uc.hpic7 0 1 0x80; \
+     w uc.hpic7 1 1 0x0; \
+     w uc.hpic7 2 1 0x2; \
+     w uc.hpic7 3 1 0x4; \
+     w uc.hpic0 0 1 0x80; \
+     w uc.hpic0 1 1 0x100; \
+     w uc.hpic0 2 1 0x0; \
+     w uc.hpic0 3 1 0x4; \
+     w uc.hpic1 0 1 0x80; \
+     w uc.hpic1 1 1 0x100; \
+     w uc.hpic1 2 1 0x2; \
+     w uc.hpic1 3 1 0x0"
+
+if !$?simulator && $?lancelot && $?unit0 \
+     "i2c probe quiet; bb clock Draco_Core 127"
+
+if $?lancelot && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit3 \
+    "stkmode modid=2; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12"
+
+if $?lancelot && $?unit4 \
+    "stkmode modid=3; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0"
+
+# Lynx SDK (TwoLynx) setup
+# (enabled by adding the property "twolynx=1")
+
+if $?twolynx && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     "
+
+if $?twolynx && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     "
+# HercuLynx setup
+# (enabled by adding the property "herculynx=1")
+# Notes:
+#	Lynx unit 1 is on Herc port 1
+#	Lynx unit 2 is on Herc port 2
+#	Lynx unit 3 is on Herc port 3
+#	Lynx unit 4 is on Herc port 4
+#	Lynx unit 5 is on Herc port 5
+#	Lynx unit 6 is on Herc port 6
+#	Lynx unit 7 is on Herc port 7
+#	Lynx unit 8 is on Herc port 8
+
+if $?herculynx && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x008; \
+     w uc.hpic0 3 1 0x010; \
+     w uc.hpic0 4 1 0x020; \
+     w uc.hpic0 5 1 0x040; \
+     w uc.hpic0 6 1 0x080; \
+     w uc.hpic0 7 1 0x100; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x008; \
+     w uc.hpic1 3 1 0x010; \
+     w uc.hpic1 4 1 0x020; \
+     w uc.hpic1 5 1 0x040; \
+     w uc.hpic1 6 1 0x080; \
+     w uc.hpic1 7 1 0x100; \
+                         ; \
+     w uc.hpic2 0 1 0x002; \
+     w uc.hpic2 1 1 0x004; \
+     w uc.hpic2 2 1 0x008; \
+     w uc.hpic2 3 1 0x010; \
+     w uc.hpic2 4 1 0x020; \
+     w uc.hpic2 5 1 0x040; \
+     w uc.hpic2 6 1 0x080; \
+     w uc.hpic2 7 1 0x100; \
+                         ; \
+     w uc.hpic3 0 1 0x002; \
+     w uc.hpic3 1 1 0x004; \
+     w uc.hpic3 2 1 0x008; \
+     w uc.hpic3 3 1 0x010; \
+     w uc.hpic3 4 1 0x020; \
+     w uc.hpic3 5 1 0x040; \
+     w uc.hpic3 6 1 0x080; \
+     w uc.hpic3 7 1 0x100; \
+                         ; \
+     w uc.hpic4 0 1 0x002; \
+     w uc.hpic4 1 1 0x004; \
+     w uc.hpic4 2 1 0x008; \
+     w uc.hpic4 3 1 0x010; \
+     w uc.hpic4 4 1 0x020; \
+     w uc.hpic4 5 1 0x040; \
+     w uc.hpic4 6 1 0x080; \
+     w uc.hpic4 7 1 0x100; \
+                         ; \
+     w uc.hpic5 0 1 0x002; \
+     w uc.hpic5 1 1 0x004; \
+     w uc.hpic5 2 1 0x008; \
+     w uc.hpic5 3 1 0x010; \
+     w uc.hpic5 4 1 0x020; \
+     w uc.hpic5 5 1 0x040; \
+     w uc.hpic5 6 1 0x080; \
+     w uc.hpic5 7 1 0x100; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x008; \
+     w uc.hpic6 3 1 0x010; \
+     w uc.hpic6 4 1 0x020; \
+     w uc.hpic6 5 1 0x040; \
+     w uc.hpic6 6 1 0x080; \
+     w uc.hpic6 7 1 0x100; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x008; \
+     w uc.hpic7 3 1 0x010; \
+     w uc.hpic7 4 1 0x020; \
+     w uc.hpic7 5 1 0x040; \
+     w uc.hpic7 6 1 0x080; \
+     w uc.hpic7 7 1 0x100; \
+                         ; \
+     "
+
+if $?herculynx && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?herculynx && $?unit1 \
+    "stkmode modid=0"
+
+if $?herculynx && $?unit2 \
+    "stkmode modid=1"
+
+if $?herculynx && $?unit3 \
+    "stkmode modid=2"
+
+if $?herculynx && $?unit4 \
+    "stkmode modid=3"
+
+if $?herculynx && $?unit5 \
+    "stkmode modid=4"
+
+if $?herculynx && $?unit6 \
+    "stkmode modid=5"
+
+if $?herculynx && $?unit7 \
+    "stkmode modid=6"
+
+if $?herculynx && $?unit8 \
+    "stkmode modid=7"
+
+# LynxaLot setup
+# (enabled by adding the property "lynxalot=1")
+# Notes:
+#	Lynx unit 0 is on Herc port 3 (hg2/hpic2) (mod 0)
+#	Lynx unit 1 is on Herc port 4 (hg3/hpic3) (mod 1)
+#	Higig conn 0 is on Herc port 5 (hg4/hpic4)
+#	Higig conn 1 is on Herc port 6 (hg5/hpic5)
+#	Draco unit 3 is on Herc port 7 (hg6/hpic6) (mod 2)
+#	Draco unit 4 is on Herc port 8 (hg7/hpic7) (mod 3)
+#	Draco unit 5 is on Herc port 1 (hg0/hpic0) (mod 4)
+#	Draco unit 6 is on Herc port 2 (hg1/hpic1) (mod 5)
+
+if $?lynxalot && $?unit2 \
+    " \
+     w uc.hpic0 0 1 0x008; \
+     w uc.hpic0 1 1 0x010; \
+     w uc.hpic0 2 1 0x080; \
+     w uc.hpic0 3 1 0x100; \
+     w uc.hpic0 4 1 0x002; \
+     w uc.hpic0 5 1 0x004; \
+                         ; \
+     w uc.hpic1 0 1 0x008; \
+     w uc.hpic1 1 1 0x010; \
+     w uc.hpic1 2 1 0x080; \
+     w uc.hpic1 3 1 0x100; \
+     w uc.hpic1 4 1 0x002; \
+     w uc.hpic1 5 1 0x004; \
+                         ; \
+     w uc.hpic2 0 1 0x008; \
+     w uc.hpic2 1 1 0x010; \
+     w uc.hpic2 2 1 0x080; \
+     w uc.hpic2 3 1 0x100; \
+     w uc.hpic2 4 1 0x002; \
+     w uc.hpic2 5 1 0x004; \
+                         ; \
+     w uc.hpic3 0 1 0x008; \
+     w uc.hpic3 1 1 0x010; \
+     w uc.hpic3 2 1 0x080; \
+     w uc.hpic3 3 1 0x100; \
+     w uc.hpic3 4 1 0x002; \
+     w uc.hpic3 5 1 0x004; \
+                         ; \
+     w uc.hpic6 0 1 0x008; \
+     w uc.hpic6 1 1 0x010; \
+     w uc.hpic6 2 1 0x080; \
+     w uc.hpic6 3 1 0x100; \
+     w uc.hpic6 4 1 0x002; \
+     w uc.hpic6 5 1 0x004; \
+                         ; \
+     w uc.hpic7 0 1 0x008; \
+     w uc.hpic7 1 1 0x010; \
+     w uc.hpic7 2 1 0x080; \
+     w uc.hpic7 3 1 0x100; \
+     w uc.hpic7 4 1 0x002; \
+     w uc.hpic7 5 1 0x004; \
+                         ; \
+     "
+
+if $?lynxalot && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?lynxalot && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?lynxalot && $?unit0 \
+    "stkmode modid=0"
+     
+if $?lynxalot && $?unit1 \
+    "stkmode modid=1"
+
+if $?lynxalot && $?unit3 \
+    "stkmode modid=2"
+
+if $?lynxalot && $?unit4 \
+    "stkmode modid=3"
+
+if $?lynxalot && $?unit5 \
+    "stkmode modid=4"
+
+if $?lynxalot && $?unit6 \
+    "stkmode modid=5"
+
+# guenevere setup
+# (enabled by adding the property "guenevere=1")
+# Notes:
+#       hgX mapping based on pbmp_valid.0=0x1b7
+#	Draco unit 1 is on Herc port 1 (hg0/hpic0) (mod 0)
+#	Draco unit 2 is on Herc port 2 (hg1/hpic1) (mod 1)
+#	Lynx unit 3 is on Herc port 8 (hg5/hpic7) (mod 2)
+#	Lynx unit 4 is on Herc port 7 (hg4/hpic6) (mod 3)
+#	Higig conn 0 is on Herc port 4 (hg2/hpic3)
+#	Higig conn 1 is on Herc port 5 (hg3/hpic4)
+#       Herc port 3 - Unused (hpic2)
+#       Herc port 6 - Unused (hpic5)
+if $?guenevere && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x100; \
+     w uc.hpic0 3 1 0x080; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x100; \
+     w uc.hpic1 3 1 0x080; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x100; \
+     w uc.hpic7 3 1 0x080; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x100; \
+     w uc.hpic6 3 1 0x080; \
+                         ; \
+     "
+
+if $?guenevere && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?guenevere && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?guenevere && $?unit1 \
+    "stkmode modid=0"
+     
+if $?guenevere && $?unit2 \
+    "stkmode modid=1"
+
+if $?guenevere && $?unit3 \
+    "stkmode modid=2"
+
+if $?guenevere && $?unit4 \
+    "stkmode modid=3"
+     
+# felix48 setup
+# (enabled by adding the property "felix48=1")
+# Notes:
+#       BCM56102 unit-0 higig port (port 26) is connected
+#       to BCM56102 Unit-1 higig port (port 26)
+#
+
+if $?felix48 && $?unit0 \
+    "stkmode modid=0 ; \
+     m IEGR_PORT MY_MODID=0; \
+     m XPORT_CONFIG MY_MODID=0; \
+     w MODPORT_MAP 1 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+
+if $?felix48 && $?unit1 \
+    "stkmode modid=1 ; \
+     m IEGR_PORT MY_MODID=1; \
+     m XPORT_CONFIG MY_MODID=1; \
+     w MODPORT_MAP 0 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+# fbpoe setup
+# (enabled by adding the property "fbpoe=1")
+# Notes:
+#       BCM56504 unit-0 higig port (port 27,28) is connected
+#       to BCM56504 Unit-1 higig port (port 27,28)
+#
+
+if $?unit0 && $?firebolt_any && $?fbpoe     \
+  "stkmode modid=0;           \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+if $?unit1 && $?firebolt_any && $?fbpoe \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+# Dual Raptor/Raven boards
+if $?raven_eb_48p || $?rap24_ref \
+    "local rcpu_system 1"
+if $?unit0 && $?rcpu_system \
+   "stkmode modid=0"
+if $?unit1 && $?rcpu_system \
+   "stkmode modid=1"
+
+# LM fb48 platform setup
+# (enabled by adding the property "lm48p=1")
+#
+if $?unit0 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=0"
+
+if $?unit1 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=1"
+
+# Set Firebolt POE power level 170(total) - 110(switch) = 60
+if $?fbpoe \
+        "local poepower 60"
+
+# Set Draco15 POE power level 170(total) - 80(switch) = 90
+if $?drac15\
+        "local poepower 90"
+
+# Hurricane3 BCM956160R setup
+# Notes:
+#       BCM56160 unit-0 higig port (port 29,30) is connected
+#       to BCM56160 Unit-1 higig port (port 26,27)
+#
+
+if $?bcm956160r && $?unit0  \
+  "stkmode modid=0; \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x60000000; \
+   trunk add id=128 r=3 pbm=hg0-hg1"
+
+if $?bcm956160r && $?unit1  \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0xc000000; \
+   trunk add id=128 r=3 pbm=hg0-hg1"
+
+# if enable_poe is set, then enable the POE processor for
+# either Firebolt or Draco15 platform
+if $?unit0 && $?enable_poe && $?fbpoe || $?drac15 \
+        "$echo rc: Enabling POE ...; \
+         poesel reset; \
+         i2c probe quiet; \
+         xpoe verbose off; \
+         xpoe power $poepower; \
+         xpoe verbose on; \
+         poesel enable"
+
+# mark this unit so that subsequent rc runs are quiet
+setenv rc$unit 1
+
+if $?macsec '\
+    macsec sync; \
+    $echo "rc: MACSEC CLI Enabled"'
+
+# cache a copy of rc.soc in memory
+rccache addq rc.soc
+
+# setup chassis if requested
+if !"expr $?autochassis2 && $unit == $units - 1" \
+    "setenv chassis2_no_rc 1; \
+     rcload c2switch.soc; \
+     setenv chassis2_no_rc; \
+    "
+
+# start stacking if requested
+if !"expr $?autostack && $unit == $units - 1" \
+	"rcload stk.soc"
+
+if !"expr $?aedev + 0" && !"expr $unit == $units - 1" \
+       "aedev init"
+
+# hurricane 48p FE platform LED setup for 56146_A0 and 56147_A0 board
+# (enabled by adding the property "fe_hu_48p=1")
+#
+if $?fe_hu_48p && $?BCM56146 || $?BCM56147 \
+    "phy fe0 0x1f 0x008b; \
+     phy fe0 0x1a 0x3f09;\
+     phy fe8 0x1f 0x008b; \
+     phy fe8 0x1a 0x3f09; \
+     phy fe16 0x1f 0x008b; \
+     phy fe16 0x1a 0x3f09"
+
+# enable LED matrix mode for PHY54292 on BCM953411K/R
+if $?bcm953411 \
+    "rcload gh_bcm953411x.soc"
diff --git a/bal_release/3rdparty/bcm-sdk/rc/arad/readme.txt b/bal_release/3rdparty/bcm-sdk/rc/arad/readme.txt
new file mode 100644
index 0000000..84e5089
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/arad/readme.txt
@@ -0,0 +1,18 @@
+This directory contains bcm files that are needed in the Pioneer svk file system `to bring up 
+the Arad BCM Diag Shell.
+User should also copy the bcm.user linux-kernel-bde.ko and linux-user-bde.ko
+from the Jenkins BAL bcm-sdk build (for PPC) or private bcm_sdk build to the same Pioneer svk file system.
+!!!
+   Do not forget to change the IP in rpc.soc to point it to the BAL_CORE
+!!!
+
+The currently supported bcm_sdk version is 6.5.4
+.
+|-- config.bcm
+|-- arad.soc
+|-- arad_dram.soc
+|-- rc.soc
+`-- rpc.soc
+ 
+  
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/arad/rpc.soc b/bal_release/3rdparty/bcm-sdk/rc/arad/rpc.soc
new file mode 100644
index 0000000..07e45b4
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/arad/rpc.soc
@@ -0,0 +1,22 @@
+cpudb newdb
+
+cpudb add key=0x1
+
+cpudb add key=0x2 local=t
+
+cts atp trans sock server start
+
+cts atp cos=0 vlan=1
+
+cte reg mode=atp
+
+cts atp trans sock inst dk=0x1 dip=10.25.8.74
+
+rpc nonexthop
+
+rpc start
+
+dune "sand trap_target 10.25.8.74:50001"
+
+dune "sand trap_receive 10.25.8.74:50002"
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/bal/bal_config.ini b/bal_release/3rdparty/bcm-sdk/rc/bal/bal_config.ini
new file mode 100644
index 0000000..bc9c0c3
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/bal/bal_config.ini
@@ -0,0 +1,16 @@
+# Maple IWF mode "direct" or "per_flow"
+iwf_mode=direct
+# System NNI/PON mapping table
+# 	0: KT2
+# 	1: SVK3
+# 	2: ARAD (experiment)
+# 	3: Qumran (experiment)
+intf_maptable=3
+# UDP port that receive the switch CPU_TRAP packets
+trap_udp_port=50001
+# Switch QOS scheduler mode
+#	0: SP
+#	1: WFQ
+ds_sched_mode=1
+# UDP port on switch that receive packet_out packets
+pkt_send_svr_listen_port=50002
diff --git a/bal_release/3rdparty/bcm-sdk/rc/bal/config.bcm b/bal_release/3rdparty/bcm-sdk/rc/bal/config.bcm
new file mode 100644
index 0000000..239ee72
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/bal/config.bcm
@@ -0,0 +1,1713 @@
+#
+# $Id: config-sand.bcm,v 1.140 2013/09/22 14:29:47 tomerma Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+
+#########################################
+##cfg for BCM88640 (PetraB) and BCM88650 (Arad)
+#########################################
+
+## temporary suppressing unknown soc properties warnings - till adding them unknown to property.h/propgen
+## (need to be the first soc property in the file).
+suppress_unknown_prop_warnings=1
+
+## Multi device system (Negev): 2 devices, fabric mode is FE, mod id is slot id
+## (Top line card is 0, button is 1).
+#diag_chassis=1
+
+## Disable diag init application. Should be used if one wants to run his own
+## application instead of the diag init example
+#diag_disable=1
+
+## Skip cosq configuration in diag_init
+#diag_cosq_disable=1
+
+#########################################
+##cfg for BCM88650 - Arad
+#########################################
+
+### Device configuration ###
+
+## Activate Emulation partial init. Values: 0 - Normal, 1 - Emulation .Default: 0x0.
+diag_emulator_partial_init.BCM88650=0
+
+## General
+# Set the FAP Device mode
+# Options: PP / TM / TDM_OPTIMIZED / TDM_STANDARD
+fap_device_mode.BCM88650=PP
+
+## Credit worth size (Bytes)
+credit_size.BCM88650=1024
+
+## Clock configurations
+# Core clock speed (MHz). Default: 600 MHz
+core_clock_speed_khz.BCM88650=600000
+# System reference clock (MHz). Default: 600 MHz
+system_ref_core_clock_khz.BCM88650=600000
+
+### Network Interface configuration ###
+## Use of the ucode_port_<Local-Port-Id>=<Interface-type>[<Interface-Id>][.<Channel-Id>]
+## Local port range: 0 - 255.
+## Interface types: XAUI/RXAUI/SGMII/ILKN/10GBase-R/XLGE/CGE/CPU
+
+# Map bcm local port to CPU[.channel] interfaces
+ucode_port_180.BCM88650=CPU.0
+
+pon_application_support_enabled_0.BCM88650=TRUE
+pon_application_support_enabled_1.BCM88650=TRUE
+pon_application_support_enabled_2.BCM88650=TRUE
+pon_application_support_enabled_3.BCM88650=TRUE
+#pon_application_support_enabled_4.BCM88650=TRUE
+#pon_application_support_enabled_5.BCM88650=TRUE
+#pon_application_support_enabled_6.BCM88650=TRUE
+#pon_application_support_enabled_7.BCM88650=TRUE
+
+vlan_match_criteria_mode=PON_PCP_ETHERTYPE
+
+#Firmware mode:
+# 0=DEFAULT
+# 1=SFP_OPT_SR4     - optical short range
+# 2=SFP_DAC         - direct attach copper
+# 3=XLAUI           - 40G XLAUI mode
+# 4=FORCE_OSDFE     - force over sample digital feedback equalization
+# 5=FORCE_BRDFE     - force baud rate digital feedback equalization
+# 6=SW_CL72         - software cl72 with AN on
+# 7=CL72_WITHOUT_AN - cl72 without AN
+#For Negev2 chassis enable DFE is recommended
+
+serdes_if_type=1024
+
+#serdes_firmware_mode.BCM88650=3
+serdes_firmware_mode_il.BCM88650=4
+serdes_firmware_mode_sfi.BCM88650=0
+
+#
+# Serdes firmware mode for Channelized PON interfaces
+#
+#serdes_firmware_mode_xe0.BCM88650=0
+#serdes_firmware_mode_xe1.BCM88650=0
+#serdes_firmware_mode_xe2.BCM88650=0
+#serdes_firmware_mode_xe3.BCM88650=0
+#serdes_firmware_mode_xe4.BCM88650=0
+#serdes_firmware_mode_xe5.BCM88650=0
+#serdes_firmware_mode_xe6.BCM88650=0
+#serdes_firmware_mode_xe7.BCM88650=0
+#serdes_firmware_mode_xe8.BCM88650=0
+#serdes_firmware_mode_xe9.BCM88650=0
+#serdes_firmware_mode_xe10.BCM88650=0
+#serdes_firmware_mode_xe11.BCM88650=0
+#serdes_firmware_mode_xe12.BCM88650=0
+#serdes_firmware_mode_xe13.BCM88650=0
+#serdes_firmware_mode_xe14.BCM88650=0
+#serdes_firmware_mode_xe15.BCM88650=0
+
+#
+# Serdes firmware mode for NNI interfaces
+#
+serdes_firmware_mode_xe128.BCM88650=2
+serdes_firmware_mode_xe129.BCM88650=2
+serdes_firmware_mode_xe130.BCM88650=2
+serdes_firmware_mode_xe131.BCM88650=2
+serdes_firmware_mode_xe0.BCM88650=2
+serdes_firmware_mode_xe1.BCM88650=2
+serdes_firmware_mode_xe2.BCM88650=2
+serdes_firmware_mode_xe3.BCM88650=2
+
+#
+# Set the speed for the PON-side ports (connected to Pioneer) to 12.5G
+#
+#port_init_speed_xe0.BCM88650=12500
+#port_init_speed_xe1.BCM88650=12500
+#IL# change xe2, xe3 speed to 1G
+port_init_speed_xe2.BCM88650=1000
+port_init_speed_xe3.BCM88650=1000
+#port_init_speed_xe4.BCM88650=12500
+#port_init_speed_xe5.BCM88650=12500
+#port_init_speed_xe6.BCM88650=12500
+#port_init_speed_xe7.BCM88650=12500
+#port_init_speed_xe8.BCM88650=12500
+#port_init_speed_xe9.BCM88650=12500
+#port_init_speed_xe10.BCM88650=12500
+#port_init_speed_xe11.BCM88650=12500
+#port_init_speed_xe12.BCM88650=12500
+#port_init_speed_xe13.BCM88650=12500
+#port_init_speed_xe14.BCM88650=12500
+#port_init_speed_xe15.BCM88650=12500
+
+#
+# Set the number of priorities for the PON-side ports (connected to
+# Pioneer) to '2'.
+#
+port_priorities_xe0.BCM88650=2
+port_priorities_xe1.BCM88650=2
+port_priorities_xe2.BCM88650=2
+port_priorities_xe3.BCM88650=2
+#port_priorities_xe4.BCM88650=2
+#port_priorities_xe5.BCM88650=2
+#port_priorities_xe6.BCM88650=2
+#port_priorities_xe7.BCM88650=2
+#port_priorities_xe8.BCM88650=2
+#port_priorities_xe9.BCM88650=2
+#port_priorities_xe10.BCM88650=2
+#port_priorities_xe11.BCM88650=2
+#port_priorities_xe12.BCM88650=2
+#port_priorities_xe13.BCM88650=2
+#port_priorities_xe14.BCM88650=2
+#port_priorities_xe15.BCM88650=2
+
+#
+# Map bcm local port to Network-Interface[.channel] interfaces
+#
+# PON Interfaces
+#
+
+#
+# Non-channelized PON Interfaces
+#
+# Uncomment the following if using non-channelized PON interfaces with
+# Pioneer.
+#
+#ucode_port_0.BCM88650=10GBase-R8
+#ucode_port_1.BCM88650=10GBase-R9
+#ucode_port_2.BCM88650=10GBase-R10
+#ucode_port_3.BCM88650=10GBase-R11
+#ucode_port_4.BCM88650=10GBase-R12
+#ucode_port_5.BCM88650=10GBase-R13
+#ucode_port_6.BCM88650=10GBase-R14
+#ucode_port_7.BCM88650=10GBase-R15
+
+#
+# Channelized PON Interfaces
+#
+# Define virtual ports for the 10G Channels
+#
+#ucode_port_0.BCM88650=10GBase-R8.0
+#ucode_port_1.BCM88650=10GBase-R9.0
+#ucode_port_2.BCM88650=10GBase-R10.0
+#ucode_port_3.BCM88650=10GBase-R11.0
+#ucode_port_4.BCM88650=10GBase-R12.0
+#ucode_port_5.BCM88650=10GBase-R13.0
+#ucode_port_6.BCM88650=10GBase-R14.0
+#ucode_port_7.BCM88650=10GBase-R15.0
+
+#
+# Define virtual ports for the 1G Channels
+#
+#ucode_port_8.BCM88650=10GBase-R8.1
+#ucode_port_9.BCM88650=10GBase-R9.1
+#ucode_port_10.BCM88650=10GBase-R10.1
+#ucode_port_11.BCM88650=10GBase-R11.1
+#ucode_port_12.BCM88650=10GBase-R12.1
+#ucode_port_13.BCM88650=10GBase-R13.1
+#ucode_port_14.BCM88650=10GBase-R14.1
+#ucode_port_15.BCM88650=10GBase-R15.1
+
+#
+# NNI Interfaces
+#
+ucode_port_128.BCM88650=10GBase-R0
+ucode_port_129.BCM88650=10GBase-R1
+ucode_port_130.BCM88650=10GBase-R2
+ucode_port_131.BCM88650=10GBase-R3
+ucode_port_0.BCM88650=10GBase-R4
+ucode_port_1.BCM88650=10GBase-R5
+ucode_port_2.BCM88650=10GBase-R6
+ucode_port_3.BCM88650=10GBase-R7
+
+#ucode_port_200.BCM88650=CPU.1
+#ucode_port_201.BCM88650=CPU.2
+#ucode_port_202.BCM88650=CPU.3
+#ucode_port_203.BCM88650=CPU.4
+
+#40G
+#ucode_port_1.BCM88650=XLGE0
+#ucode_port_2.BCM88650=XLGE1
+#ucode_port_3.BCM88650=XLGE2
+#ucode_port_4.BCM88650=XLGE3
+#ucode_port_5.BCM88650=XLGE4
+#ucode_port_6.BCM88650=XLGE5
+#ucode_port_7.BCM88650=XLGE6
+
+#ILKN configuration - basic config
+#ucode_port_31.BCM88650=ILKN0
+#ucode_port_32.BCM88650=ILKN1
+#ilkn_num_lanes_0.BCM88650=12
+#ilkn_num_lanes_1.BCM88650=12
+#port_init_speed_il.BCM88650=10312
+
+
+#ILKN per port channel stat
+#ilkn_counters_mode.BCM88650=PACKET_PER_CHANNEL
+
+#ILKN configuration - advanced
+#ilkn_metaframe_sync_period=2048
+# Enable\Disable ILKN status message sent through an out-of-band interface.
+# ilkn_interface_status_oob_ignore.BCM88650=1
+
+##ILKN retransmit
+#ilkn_retransmit_enable_rx.BCM88650=1
+#ilkn_retransmit_enable_tx.BCM88650=1
+#ilkn_retransmit_buffer_size.BCM88650=250
+#ilkn_retransmit_num_requests_resent.BCM88650=15
+#ilkn_retransmit_num_sn_repetitions_tx.BCM88650=1
+#ilkn_retransmit_num_sn_repetitions_rx.BCM88650=1
+#ilkn_retransmit_rx_timeout_words.BCM88650=3800
+#ilkn_retransmit_rx_timeout_sn.BCM88650=250
+#ilkn_retransmit_rx_ignore.BCM88650=80
+#ilkn_retransmit_rx_reset_when_error_enable.BCM88650=1
+#ilkn_retransmit_rx_watchdog.BCM88650=0
+#ilkn_retransmit_rx_reset_when_alligned_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_retry_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_after_disc_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_before_disc_error_enable.BCM88650=0
+#ilkn_retransmit_rx_reset_when_timout_error_enable.BCM88650=0
+#ilkn_retransmit_tx_wait_for_seq_num_change_enable.BCM88650=1
+#ilkn_retransmit_tx_ignore_requests_when_fifo_almost_empty.BCM88650=1
+
+#ucode_port_40.BCM88650=RCY.0
+#ucode_port_41.BCM88650=RCY.1
+#ucode_port_42.BCM88650=RCY.2
+
+## CAUI Configuration
+#ucode_port_41.BCM88650=CGE0
+#ucode_port_42.BCM88650=CGE1
+caui_num_lanes_0.BCM88650=10
+caui_num_lanes_1.BCM88650=10
+#Required for working IXIA 100G port:
+mld_lane_swap_lane20_ce.BCM88650=0
+mld_lane_swap_lane21_ce.BCM88650=1
+mld_lane_swap_lane0_ce.BCM88650=20
+mld_lane_swap_lane1_ce.BCM88650=21
+
+# This configures the lane polarity
+pb_serdes_lane_swap_polarity_tx_phy1.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy2.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy3.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy4.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy5.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy6.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy7.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy8.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy10.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy13.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy14.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy17.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy18.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy19.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy20.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy21.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy22.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy23.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy24.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy25.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy27.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy28.BCM88650=0
+
+pb_serdes_lane_swap_polarity_rx_phy1.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy2.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy3.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy4.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy5.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy6.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy7.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy8.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy10.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy13.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy14.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy17.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy18.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy19.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy20.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy21.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy22.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy23.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy24.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy25.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy27.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy28.BCM88650=0
+
+xgxs_tx_lane_map_quad0.BCM88650=0x3210
+xgxs_tx_lane_map_quad1.BCM88650=0x3210
+xgxs_tx_lane_map_quad2.BCM88650=0x3210
+xgxs_tx_lane_map_quad3.BCM88650=0x3210
+xgxs_tx_lane_map_quad4.BCM88650=0x3210
+xgxs_tx_lane_map_quad5.BCM88650=0x3210
+xgxs_tx_lane_map_quad6.BCM88650=0x3210
+
+xgxs_rx_lane_map_quad0.BCM88650=0x3210
+xgxs_rx_lane_map_quad1.BCM88650=0x3210
+xgxs_rx_lane_map_quad2.BCM88650=0x3210
+xgxs_rx_lane_map_quad3.BCM88650=0x3210
+xgxs_rx_lane_map_quad4.BCM88650=0x3210
+xgxs_rx_lane_map_quad5.BCM88650=0x3210
+xgxs_rx_lane_map_quad6.BCM88650=0x3210
+
+
+
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88650=1
+
+#Port init mode
+#port_init_duplex=0
+#port_init_adv=0
+#port_init_autoneg=0
+
+
+# This disables serdes initialization
+# phy_null.BCM88650=1
+
+##  Number of Internal ports
+# Enable the ERP port. Values: 0 / 1.
+num_erp_tm_ports.BCM88650=1
+# Enable the OLP port. Values: 0 / 1.
+num_olp_tm_ports.BCM88650=1
+# Enable OAMP
+num_oamp_ports.BCM88650=0
+
+## Firmware Load Method
+load_firmware.BCM88650=0x102
+
+### Headers configuration ###
+
+## Use of the tm_port_header_type_<Local-Port-Id>=<Header-type>
+## Default header type is derived from fap_device_mode: If fap_device_mode is
+## PP, default header type is ETH. Otherwise, defualt header type is TM.
+## Header type per port can be overriden.
+## All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/UDH_ETH
+## Injected header types: if PTCH, INJECTED (local Port of type TM) or INJECTED_PP (PP)
+##                        if PTCH-2, INJECTED_2 (local Port of type TM) or INJECTED_2_PP (PP)
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88650=TM
+
+tm_port_header_type_in_180.BCM88650=INJECTED_2
+tm_port_header_type_out_180.BCM88650=CPU
+
+tm_port_header_type_in_200.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_200.BCM88650=ETH
+tm_port_header_type_in_201.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_201.BCM88650=ETH
+tm_port_header_type_in_202.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_202.BCM88650=ETH
+tm_port_header_type_in_203.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_203.BCM88650=ETH
+
+### Parser Configuration ###
+# Parser has 4 custom macros that are allocated dynamically and
+# configured according to the following features and soc properties:
+# Trill (1 macro) - trill_mode
+# FCoE (2 macros) - bcm886xx_fcoe_switch_mode
+# VxLAN (1 macro) - bcm886xx_vxlan_enable
+# IPv6-Extension-header (2 macros) - bcm886xx_ipv6_ext_hdr_enable
+# UDP (1 macro) - UDP parsing is enabled by default, and can be 
+#  disabled with soc property custom_feature_udp_parse_disable
+#  When disabling UDP parsing VxLAN and 1588oUDP are affected
+
+# Enable IPv6 Extension Header, 0 - disable (default), 1 - enable
+#bcm886xx_ipv6_ext_hdr_enable=1
+
+# Disable UDP parsing, 0 - enable (default), 1 - disable
+#custom_feature_udp_parse_disable=1
+
+#OAMP port
+#tm_port_header_type_out_232.BCM88650=CPU
+
+#MPLS-TP channel types for OAM/BFD - If MPLS-TP used, channel should be specified
+#Available types: mplstp_bfd_control_channel_type
+#               mplstp_pw_ach_channel_type
+#               mplstp_dlm_channel_type
+#               mplstp_ilm_channel_type
+#               mplstp_dm_channel_type
+#               mplstp_ipv4_channel_type
+#               mplstp_cc_channel_type
+#               mplstp_cv_channel_type
+#               mplstp_on_demand_cv_channel_type
+#               mplstp_pwe_oam_channel_type
+#               mplstp_ipv6_channel_type
+#               mplstp_fault_oam_channel_type
+#               mplstp_g8113_channel_type
+#mplstp_g8113_channel_type=0x8902
+
+
+
+# Set the recycling port processing to be raw (static forwarding)
+tm_port_header_type_rcy.BCM88650=RAW
+
+### RCPU
+# Valid CPU local ports on which RCPU packets can be received by slave device.
+#rcpu_rx_pbmp=0xf00000000000000000000000000000000000000000000000001
+
+#tm_port_header_type_514.BCM88650=RAW
+
+## Header extensions
+# Set if an FTMH Out-LIF extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS
+fabric_ftmh_outlif_extension.BCM88650=IF_MC
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88660: ENABLED, FULL_HASH
+# Options for 88650: ENABLED
+# Options for 88640 compatible: DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY / 16B_STACKING_ROUTE_HISTORY / STANDBY_MC_LB
+#  (available only for AradPlus)
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88650=DISABLED
+
+# Set if an OTMH Out-LIF (CUD) Extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS / DOUBLE_TAG (two hop scheduling)
+# Default: NEVER
+# tm_port_otmh_outlif_ext_mode_13.BCM88650=NEVER
+
+# Set if an OTMH Source-System-Port Extension is present.
+# Option: 0/1
+# Default: 0
+# tm_port_otmh_src_ext_enable_13.BCM88650=0
+
+#Trunk hash format, relevant only for AradPlus. Possible values: NORMAL (default) / INVERTED / DUPLICATED.
+#trunk_hash_format=NORMAL
+
+## Stacking Application
+#stacking_enable.BCM88650=1
+#custom_feature_stamp_uc_destination.BCM88650=1
+
+## System RED
+# Set System-Red functionality.
+#system_red_enable.BCM88650=1
+
+# Indicate the size (Bytes) of a first header to skip
+# before the major header at ingress (e.g. Ethernet, ITMH)
+# It can be set per port also
+first_header_size.BCM88650=0
+
+# Indicate the size (Bytes) of the PMF Extension Headers
+# to remove for TM header type ports (expecting ITMH)
+# Set per port
+#post_headers_size_0.BCM88650=4
+
+# Indicate the size (Bytes) of the User-Headers: configurable
+# headers located in the fabric between internal headers and
+# Ethernet. Their values are set by Ingress FP, and can be used
+# by Egress FP or Egress Editor.
+# units: bits. 4 values can be set:
+# 0 - size of the 1st User-Header, for the Egress PMF. 0b / 8b / 16b
+# 1 - size of the 2nd User-Header, for the Egress PMF. 0b / 8b / 16b
+# The sum of these 2 values should be under 16b
+# 2, 3 - size of the 1st/2nd User-Header, for the Egress Editor.
+# 0b / 8b / 16b / 24b / 32b
+# Each of the global User-Header size must be under 32 bits, but not 24 bits.
+# The Egress FP field is always at the MSB of the User-Header
+# Not available for 88650-A0.
+#field_class_id_size_0.BCM88650=8
+#field_class_id_size_1.BCM88650=0
+#field_class_id_size_2.BCM88650=24
+#field_class_id_size_3.BCM88650=0
+
+
+### Trunk - LAG configuration ###
+# Set Set the number of LAGs: 1024, 512, 256, 128 or 64
+number_of_trunks.BCM88650=256
+
+### SYNCE configuration ###
+## Synchronous Ethernet Signal Mode.
+## Options: TWO_DIFF_CLK, TWO_CLK_AND_VALID. Default: TWO_CLK_AND_VALID
+#sync_eth_mode.BCM88650=TWO_CLK_AND_VALID
+
+## Clock Source (single SerDes) lane in the specified NIF port.
+## Usage: sync_eth_clk_to_nif_id_clk_<clk_number>=<serdes_number>
+#sync_eth_clk_to_nif_id_clk_0.BCM88650=1
+#sync_eth_clk_to_nif_id_clk_1.BCM88650=1
+
+## Clock Divider for the selected recovered clock. Valid values: 1/2/4. Default: 1.
+## Usage: sync_eth_clk_divider_clk_<clk_number>=<1/2/4>
+#sync_eth_clk_divider_clk_0.BCM88650=1
+#sync_eth_clk_divider_clk_1.BCM88650=1
+
+## Enable the automatic squelch function for the recovered clock. Valid values: 0/1. Default: 0.
+## Usage: sync_eth_clk_squelch_enable_clk_<clk_number>=<0/1>
+#sync_eth_clk_squelch_enable_clk_0.BCM88650=0
+#sync_eth_clk_squelch_enable_clk_1.BCM88650=0
+
+### ELK configuration ###
+## External lookup (TCAM) Device type select, Indicate the External lookup Device type.
+# Value Options: NONE/NL88650. Default: NONE.
+#ext_tcam_dev_type=NL88650
+
+## Set ELK FWD table Size.
+# format: ext_xxx_fwd_table_size.
+# where xxx replaced by FWD options: ip4_uc_rpf/ip4_mc/ip6_uc_rpf/ip6/ip6_mc/trill_uc/trill_mc/mpls/coup_mpls
+# Value Options: (0) - External table disabled, >0: number of entries. Default: 0.
+#ext_ip4_uc_rpf_fwd_table_size=8192
+#ext_ip4_mc_fwd_table_size=8192
+
+## Set ELK IP FWD use NetRoute  ALG.
+# Value Options: ALG_LPM_LPM/ALG_LPM_NETROUTE/ALG_LPM_TCAM. Default: ALG_LPM_TCAM.
+#ext_fwd_algorithm_lpm=ALG_LPM_TCAM
+
+## Set ELK interface mode.
+# Change ELK interface configuration to support CAUI port.
+# Value Options: 0/1. 0 - Normal mode, 1  2 CAUI port + ELK mode. Default: 0.
+#ext_interface_mode=0
+
+### Configure MDIO interface
+# External MDIO clock rate divisor . Default: 0x24.
+#rate_ext_mdio_divisor=0x36
+# External MDIO clock rate divisor. Default: 0x1.
+#rate_ext_mdio_dividend=1
+
+### TDM - OTN configuration ###
+#fap_tdm_bypass.BCM88650=0
+
+# Indicate if a Petra-B device is connected to the actual device
+# For TDM/OTN applications,
+# system_is_petra_b_in_system.BCM88650=0
+##Indicate if TDM can arrive throgh primary pipe.
+#Should be 1 for a System with PetraB that connected to fabric over primary pipe.
+fabric_tdm_over_primary_pipe.BCM88650=0
+
+### Fabric configuration ###
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88650=2
+#SFI speed rate
+port_init_speed_sfi.BCM88650=10312
+#CL72
+#port_init_cl72_sfi=0
+fabric_segmentation_enable.BCM88650=1
+
+## Fabric transmission mode
+# Set the Connect mode to the Fabric
+# Options: FE - presence of a Fabric device (single stage) / MULT_STAGE_FE -  Multi-stage /
+# SINGLE_FAP - stand-alone device / MESH - mesh / BACK2BACK - 2 devices in Mesh
+#fabric_connect_mode.BCM88650=SINGLE_FAP
+fabric_connect_mode.BCM88650=FE
+
+## Cell format configuration
+# Indicate if the traffic can be sent in dual pipe
+is_dual_mode.BCM88650=0
+# Indicate the format of the cell:
+# A VCS128 cell is used if system_is_vcs_128_in_system or system_is_fe600_in_system is TRUE
+system_is_vcs_128_in_system.BCM88650=0
+system_is_fe600_in_system.BCM88650=0
+
+### WRED ###
+
+# Set the maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88650=0
+
+### OCB (On-Chip Buffer) configuration ###
+# Enable the OCB
+# Enable MODES:
+#   0/FALSE        -->  OCB_DISABLED     --> No OCB use
+#   1/TRUE         -->  OCB_ENABLED      --> Like in Arad-A0/B0. Some packets may use both DRAM and OCB resources
+#   ONE_WAY_BYPASS -->  Depends on number of present drams (available only for AradPlus):
+#                      0 drams:   - OCB_ONLY
+#                      1 drams:   - OCB_ONLY_1_DRAM     -->  : OCB-only with 1 DRAM for the free pointers
+#                      2-8 drams: - OCB_DRAM_SEPARATE   -->  : OCB and DRAM coexist separately
+#   Default: TRUE.
+bcm886xx_ocb_enable.BCM88650=1
+
+# OCB Data Buffer size. Possible values: 128/256/512/1024. Default: 256.
+bcm886xx_ocb_databuffer_size.BCM88650=256
+# Repartition between Unicast and Full Multicast buffers.
+# 0: 80% Unicast and 20% Multicast, 1: Unicast-Only
+bcm886xx_ocb_repartition.BCM88650=0
+
+### PDM configuration ###
+# Set the PDM Mode.
+# 0: simple (default), 1: reduced (mandatory for LLFC-VSQ, PFC-VSQ, or ST-VSQ)
+bcm886xx_pdm_mode.BCM88650=0
+
+### Multicast Number of DBuff mode ###
+# Set IQM FMC buffers-replication sizes
+# Options for 88650: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE/ARAD_INIT_FMC_64_REP_128K_DBUFF_MODE
+# Default: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88650=ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+
+### Multicast configuration ###
+# Multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_min.BCM88650=0
+egress_multicast_direct_bitmap_max.BCM88650=4095
+
+### VOQ - Flow configuration ###
+
+# Set the VOQ mapping mode:
+# DIRECT: More than 4K System Ports are supported. System-level WRED is not supported.
+# INDIRECT: similar to Petra-B. Up to 4K System Ports.
+voq_mapping_mode.BCM88650=INDIRECT
+
+# Set the Base Queue to be added to the packet flow-id
+# when the Flow-Id is set explicitely either by the ITMH
+# or by the Destination resolution in the Packet processing
+flow_mapping_queue_base.BCM88650=0
+
+# Set the number of priorities supported at egress per Port
+# Options: 1 / 2 / 8
+port_priorities.BCM88650=8
+
+# Set the shared multicast resource mode: Strict / Discrete
+egress_shared_resources_mode.BCM88650=Strict
+
+# Define outgoing port rate mode in data rate or packet rate.
+# Options: DATA / PACKET
+otm_port_packet_rate.BCM88650=DATA
+
+# Set Port egress recycling scheduler configuration.
+# 0: Strict Priority Scheduler, 1: Round Robin Scheduler
+port_egress_recycling_scheduler_configuration.BCM88650=0
+
+# Set statically the region mode per region id
+# 0: queue connectors only (InterDigitated = FALSE, OddEven = TRUE)
+# 1: queue connectors, SE (InterDigitated =TRUE, OddEven = TRUE)
+# 2: queue connectors, SE (InterDigitated =TRUE, OddEven = FALSE)
+dtm_flow_mapping_mode_region_65.BCM88650=0
+dtm_flow_mapping_mode_region_66.BCM88650=0
+dtm_flow_mapping_mode_region_67.BCM88650=0
+dtm_flow_mapping_mode_region_68.BCM88650=0
+dtm_flow_mapping_mode_region_69.BCM88650=0
+dtm_flow_mapping_mode_region_70.BCM88650=0
+dtm_flow_mapping_mode_region_71.BCM88650=0
+dtm_flow_mapping_mode_region_72.BCM88650=0
+dtm_flow_mapping_mode_region_73.BCM88650=0
+dtm_flow_mapping_mode_region_74.BCM88650=0
+dtm_flow_mapping_mode_region_75.BCM88650=0
+dtm_flow_mapping_mode_region_76.BCM88650=0
+dtm_flow_mapping_mode_region_77.BCM88650=0
+dtm_flow_mapping_mode_region_78.BCM88650=0
+dtm_flow_mapping_mode_region_79.BCM88650=0
+dtm_flow_mapping_mode_region_80.BCM88650=0
+dtm_flow_mapping_mode_region_81.BCM88650=1
+dtm_flow_mapping_mode_region_82.BCM88650=1
+dtm_flow_mapping_mode_region_83.BCM88650=1
+dtm_flow_mapping_mode_region_84.BCM88650=1
+dtm_flow_mapping_mode_region_85.BCM88650=1
+dtm_flow_mapping_mode_region_86.BCM88650=1
+dtm_flow_mapping_mode_region_87.BCM88650=1
+dtm_flow_mapping_mode_region_88.BCM88650=1
+dtm_flow_mapping_mode_region_89.BCM88650=1
+dtm_flow_mapping_mode_region_90.BCM88650=1
+dtm_flow_mapping_mode_region_91.BCM88650=1
+dtm_flow_mapping_mode_region_92.BCM88650=1
+dtm_flow_mapping_mode_region_93.BCM88650=1
+dtm_flow_mapping_mode_region_94.BCM88650=1
+dtm_flow_mapping_mode_region_95.BCM88650=1
+dtm_flow_mapping_mode_region_96.BCM88650=1
+dtm_flow_mapping_mode_region_97.BCM88650=1
+dtm_flow_mapping_mode_region_98.BCM88650=1
+dtm_flow_mapping_mode_region_99.BCM88650=2
+dtm_flow_mapping_mode_region_100.BCM88650=2
+dtm_flow_mapping_mode_region_101.BCM88650=2
+dtm_flow_mapping_mode_region_102.BCM88650=2
+dtm_flow_mapping_mode_region_103.BCM88650=2
+dtm_flow_mapping_mode_region_104.BCM88650=2
+dtm_flow_mapping_mode_region_105.BCM88650=2
+dtm_flow_mapping_mode_region_106.BCM88650=2
+dtm_flow_mapping_mode_region_107.BCM88650=2
+dtm_flow_mapping_mode_region_108.BCM88650=2
+dtm_flow_mapping_mode_region_109.BCM88650=2
+dtm_flow_mapping_mode_region_110.BCM88650=2
+dtm_flow_mapping_mode_region_111.BCM88650=2
+dtm_flow_mapping_mode_region_112.BCM88650=2
+dtm_flow_mapping_mode_region_113.BCM88650=2
+dtm_flow_mapping_mode_region_114.BCM88650=2
+dtm_flow_mapping_mode_region_115.BCM88650=2
+dtm_flow_mapping_mode_region_116.BCM88650=2
+dtm_flow_mapping_mode_region_117.BCM88650=2
+dtm_flow_mapping_mode_region_118.BCM88650=2
+dtm_flow_mapping_mode_region_119.BCM88650=2
+dtm_flow_mapping_mode_region_120.BCM88650=2
+dtm_flow_mapping_mode_region_121.BCM88650=2
+dtm_flow_mapping_mode_region_122.BCM88650=2
+dtm_flow_mapping_mode_region_123.BCM88650=2
+dtm_flow_mapping_mode_region_124.BCM88650=2
+dtm_flow_mapping_mode_region_125.BCM88650=2
+dtm_flow_mapping_mode_region_126.BCM88650=2
+dtm_flow_mapping_mode_region_127.BCM88650=2
+dtm_flow_mapping_mode_region_128.BCM88650=2
+
+#IL# Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88650=2
+dtm_flow_nof_remote_cores_region_2.BCM88650=2
+dtm_flow_nof_remote_cores_region_3.BCM88650=2
+dtm_flow_nof_remote_cores_region_4.BCM88650=2
+dtm_flow_nof_remote_cores_region_5.BCM88650=2
+dtm_flow_nof_remote_cores_region_6.BCM88650=2
+dtm_flow_nof_remote_cores_region_7.BCM88650=2
+dtm_flow_nof_remote_cores_region_8.BCM88650=2
+dtm_flow_nof_remote_cores_region_9.BCM88650=2
+dtm_flow_nof_remote_cores_region_10.BCM88650=2
+dtm_flow_nof_remote_cores_region_11.BCM88650=2
+dtm_flow_nof_remote_cores_region_12.BCM88650=2
+dtm_flow_nof_remote_cores_region_13.BCM88650=2
+dtm_flow_nof_remote_cores_region_14.BCM88650=2
+dtm_flow_nof_remote_cores_region_15.BCM88650=2
+dtm_flow_nof_remote_cores_region_16.BCM88650=2
+dtm_flow_nof_remote_cores_region_17.BCM88650=2
+dtm_flow_nof_remote_cores_region_18.BCM88650=2
+dtm_flow_nof_remote_cores_region_19.BCM88650=2
+dtm_flow_nof_remote_cores_region_20.BCM88650=2
+dtm_flow_nof_remote_cores_region_21.BCM88650=2
+dtm_flow_nof_remote_cores_region_22.BCM88650=2
+dtm_flow_nof_remote_cores_region_23.BCM88650=2
+dtm_flow_nof_remote_cores_region_24.BCM88650=2
+dtm_flow_nof_remote_cores_region_25.BCM88650=2
+dtm_flow_nof_remote_cores_region_26.BCM88650=2
+dtm_flow_nof_remote_cores_region_27.BCM88650=2
+dtm_flow_nof_remote_cores_region_28.BCM88650=2
+dtm_flow_nof_remote_cores_region_29.BCM88650=2
+dtm_flow_nof_remote_cores_region_30.BCM88650=2
+dtm_flow_nof_remote_cores_region_31.BCM88650=2
+dtm_flow_nof_remote_cores_region_32.BCM88650=2
+dtm_flow_nof_remote_cores_region_33.BCM88650=2
+dtm_flow_nof_remote_cores_region_34.BCM88650=2
+dtm_flow_nof_remote_cores_region_35.BCM88650=2
+dtm_flow_nof_remote_cores_region_36.BCM88650=2
+dtm_flow_nof_remote_cores_region_37.BCM88650=2
+dtm_flow_nof_remote_cores_region_38.BCM88650=2
+dtm_flow_nof_remote_cores_region_39.BCM88650=2
+dtm_flow_nof_remote_cores_region_40.BCM88650=2
+dtm_flow_nof_remote_cores_region_41.BCM88650=2
+dtm_flow_nof_remote_cores_region_42.BCM88650=2
+dtm_flow_nof_remote_cores_region_43.BCM88650=2
+dtm_flow_nof_remote_cores_region_44.BCM88650=2
+dtm_flow_nof_remote_cores_region_45.BCM88650=2
+dtm_flow_nof_remote_cores_region_46.BCM88650=2
+dtm_flow_nof_remote_cores_region_47.BCM88650=2
+dtm_flow_nof_remote_cores_region_48.BCM88650=2
+dtm_flow_nof_remote_cores_region_49.BCM88650=2
+dtm_flow_nof_remote_cores_region_50.BCM88650=2
+dtm_flow_nof_remote_cores_region_51.BCM88650=2
+dtm_flow_nof_remote_cores_region_52.BCM88650=2
+dtm_flow_nof_remote_cores_region_53.BCM88650=2
+dtm_flow_nof_remote_cores_region_54.BCM88650=2
+dtm_flow_nof_remote_cores_region_55.BCM88650=2
+dtm_flow_nof_remote_cores_region_56.BCM88650=2
+dtm_flow_nof_remote_cores_region_57.BCM88650=2
+dtm_flow_nof_remote_cores_region_58.BCM88650=2
+dtm_flow_nof_remote_cores_region_59.BCM88650=2
+dtm_flow_nof_remote_cores_region_60.BCM88650=2
+#dtm_flow_nof_remote_cores_region_core0_2.BCM88675=2
+
+### Flow Control configuration ###
+# Set the Flow control type per Port.
+# Options: LL (Link-level) / CB2 (Class-Based - 2 classes) /
+# CB8 (Class-Based - 8 classes)
+# flow_control_type.BCM88650=LL
+
+## Out-Of-Band Flow control configuration
+#spn_FC_OOB_TYPE, spn_FC_OOB_MODE, spn_FC_OOB_CALENDER_LENGTH, spn_FC_OOB_CALENDER_REP_COUNT,
+
+## Set voltage mode for oob interfaces
+#HSTL_1.5V
+#3.3V
+#HSTL_1.5V_VDDO_DIV_2
+ext_voltage_mode_oob=3.3V
+
+## Inband Interlaken configuration
+# spn_FC_INBAND_INTLKN_MODE, spn_FC_INBAND_INTLKN_CALENDER_LENGTH, spn_FC_INBAND_INTLKN_CALENDER_REP_COUNT
+# spn_FC_INBAND_INTLKN_CALENDER_LLFC_MODE, spn_FC_INBAND_INTLKN_LLFC_MUB_ENABLE_MASK
+
+### Meter engine configuration ###
+
+# Specify meter operation mode
+# 32 - Two meters per packet (32k total)
+# 64 - One meter per packet (64k total)
+# Options: 0, 32, 64
+policer_ingress_count.BCM88650=32
+
+# For meters in double 32k mode, determine the sharing mode
+# Options:
+# 0 - NONE (only for 64k mode)
+# 1 - SERIAL (only for 32k mode)
+# 2 - PARALLEL (only for 32k mode)
+policer_ingress_sharing_mode.BCM88650=1
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine the mapping
+# Options: BEST, WORST
+# policer_result_parallel_color_map.BCM88650=WORST
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine how the buckets are changed
+# Options: CONSTANT, TRANSPARENT, DEFERRED
+# policer_result_parallel_bucket_update.BCM88650=CONSTANT
+
+# Applies only to Arad+ (88660)
+# Set the Ethernet policer to work in color blind mode
+# rate_color_blind.BCM88650=1
+
+# L2 learn limit mode
+# Options: VLAN, VLAN_PORT, TUNNEL or the numeric equivalent 0-2.
+# Default: VLAN
+# l2_learn_limit_mode = VLAN_PORT
+
+# Applies only to Arad+ (88660)
+# Determines the L2 learn limit ranges when l2_learn_limit_mode is set to VLAN_PORT
+# Two range bases can be selected, each of 16K size.
+# Options: 0, 16K, 32K, 48K.
+# Default: 0 & 16K
+# l2_learn_lif_range_base_0 = 0
+# l2_learn_lif_range_base_1 = 16K
+
+### Counter engine configuration ###
+
+# Set the Counter source
+# Options: INGRESS_FIELD / INGRESS_VOQ / INGRESS_VSQ
+# INGRESS_CNM / EGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM (per queue) / EGRESS_TM_PORT (per port)
+# EGRESS_RECEIVE_VSI / EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM (per queue) / EGRESS_RECEIVE_TM_PORT (per port)
+# INGRESS_OAM / EGRESS_OAM
+# 2 Counter-Pointers can be set (with _0 and _1) for
+# INGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT
+# Range extension can be set (with _LSB and _MSB) for
+# INGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT /EGRESS_RECEIVE_VSI /
+# EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM / EGRESS_RECEIVE_TM_PORT
+counter_engine_source_0.BCM88650=INGRESS_FIELD
+counter_engine_source_1.BCM88650=INGRESS_FIELD_1
+counter_engine_source_2.BCM88650=INGRESS_VOQ
+###
+###  DML
+###
+###  For DML applications, counter engine 3 is used for VOQ
+###  counters. This in combination with configuring the engines used for
+###  VOQs for FWD_DROP allows for counters for 32K VOQs.
+###
+#counter_engine_source_3.BCM88650=EGRESS_FIELD
+counter_engine_source_3.BCM88650=INGRESS_VOQ
+
+# Configure the statistic interface egress source
+# Options: EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT (the default is TM)
+# valid just when there is no conflict with the other counter engines
+#counter_engine_source_stat0.BCM88650=EGRESS_TM
+#counter_engine_source_stat1.BCM88650=EGRESS_TM
+
+
+# Set the Counter engine resolution
+# SIMPLE_COLOR = green, not green
+# SIMPLE_COLOR_FWD = fwd green, fwd not green (BCM88660_A0 only)
+# SIMPLE_COLOR_DROP = drop green, drop not green (BCM88660_A0 only)
+# FWD_DROP = forwarded, dropped
+# GREEN_NOT_GREEN = fwd grn, drop grn, fwd not grn, drop not grn
+# FULL_COLOR = fwd grn, drop grn, fwd not grn, drop yel, drop red
+# ALL = received
+# FWD = forwarded, DROP = droped (not supported by ARAD_A0)
+# CONFIGURABLE = defined by counter_engine_map_ SOC properties (BCM88660_A0 only)
+counter_engine_statistics_0.BCM88650=FULL_COLOR
+counter_engine_statistics_1.BCM88650=FULL_COLOR
+###
+###  DML
+###
+###  For DML applications, counter engine 3 is used for VOQ
+###  counters. This in combination with configuring the engines used for
+###  VOQs for FWD_DROP allows for counters for 32K VOQs.
+###
+#counter_engine_statistics_2.BCM88650=FULL_COLOR
+#counter_engine_statistics_3.BCM88650=FULL_COLOR
+counter_engine_statistics_2.BCM88650=FWD_DROP
+counter_engine_statistics_3.BCM88650=FWD_DROP
+
+# Set the Counter format
+# Options: PACKETS_AND_BYTES / PACKETS / BYTES
+# / MAX_QUEUE_SIZE / PACKETS_AND_PACKETS(supported just in FWD_DROP statistic in BCM88660_A0)
+# If not PACKETS_AND_BYTES or PACKETS_AND_PACKETS, the HW Counter width is 59 bits, thus
+# no background SW operation is performed
+counter_engine_format_0.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_1.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_2.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_3.BCM88650=PACKETS_AND_BYTES
+
+# #enable/disable counter processor background thread (default:1-enable)
+# counter_engine_sampling_interval=1
+
+### Configurable mode configuration (BCM88660_A0 only)###
+# counter_engine_statistics_0.BCM88660_A0=CONFIGURABLE
+# counter_engine_map_enable_0.BCM88660_A0=1
+# counter_engine_map_size_0.BCM88660_A0=4
+# counter_engine_map_fwd_green_offset_0.BCM88660_A0=0
+# counter_engine_map_fwd_yellow_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_red_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_black_offset_0.BCM88660_A0=2
+# counter_engine_map_drop_green_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_yellow_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_red_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_black_offset_0.BCM88660_A0=3
+
+### Statistic-Report configuration ###
+# Enable the Statistic-Interface configuration
+# stat_if_enable_<port> - not supported by ARAD_A0
+# stat_if_enable.BCM88650=1
+
+# ## Statistic-Report Properties
+# # Set the Statistic-Report mode
+# # Options: BILLING / BILLING_QUEUE_NUMBER (not supported by ARAD_A0)/ QSIZE
+# stat_if_report_mode.BCM88650=QSIZE
+# #Indicate if idle reports must be sent
+# #when the Statistic-report rate is too low
+# stat_if_idle_reports_present.BCM88650=0
+# # Indicate if the reported packet size is the original packet size
+# stat_if_report_original_pkt_size.BCM88650=1
+# #If set then a single ingress-billing report will be generated
+# #for the whole set of the multicast copies
+# stat_if_report_multicast_single_copy=1
+# ## Statistic Packet configurations
+# # Set the Statistic Packet size (Bytes)
+# # Valid valued: 65B/126B/248B/492B (Queue-Size), 64B/128B/256B/512B/1024B (Billing)
+# stat_if_pkt_size=64B
+#
+# ## Scrubber configuration
+# # Set the range of VOQs to scrub. Range: 0 - 96K-1.
+# stat_if_scrubber_queue_min.BCM88650=0
+# stat_if_scrubber_queue_max.BCM88650=0
+#
+# # Set the scrubber rate range
+# # If set to 0 (default), the scrubber is disabled. Units: nanoseconds
+# stat_if_scrubber_rate_min.BCM88650=0
+# stat_if_scrubber_rate_max.BCM88650=0
+#
+# # Set the thresholds (thresh_id 0 - 15) defining
+# # occupancy range per resource type:
+# # DRAM Buffers, Buffer descriptors, Buffer descriptors buffers
+# stat_if_scrubber_bdb_th.BCM88650=0
+# stat_if_scrubber_buffer_descr_th.BCM88650=0
+# stat_if_uc_dram_buffer_descr_th.BCM88650=0
+#
+# #Relective report for queue size mode - not supported by ARAD_A0
+# #Reports will be created for queue num range (stat_if_selective_report_queue_min -stat_if_selective_report_queue_max)
+# #Default - all range
+# stat_if_selective_report_queue_min.BCM88650_B0=0
+# stat_if_selective_report_queue_max.BCM88650_B0=98303
+
+### Transaction - DMA configuration ###
+# Time to wait for SCHAN channel response (from CMIC). Units: microseconds.
+
+# TODO
+### Counter threads ###
+# spn_BCM_STAT_PBMP, spn_BCM_STAT_INTERVAL, spn_BCM_STAT_FLAGS
+
+### Interrupts ###
+## Set interrupts global parameters.
+# Options: 1 - Polling interrupt mode, 0 - Line/MSI interrupt mode. Default: 1.
+polled_irq_mode.BCM88650=0
+#  Set the delay in microsecond between the polling, relevant only to Polling mode.  Default: 0x0.
+polled_irq_delay.BCM88650=50000
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling, relevant only to Polling completion mode.
+# SCHAN:
+#schan_intr_enable.0=1
+schan_timeout_usec.BCM88650=300000
+# TDMA
+tdma_intr_enable.BCM88650=1
+tdma_timeout_usec.BCM88650=80000000
+# TSLAM
+tslam_intr_enable.BCM88650=1
+tslam_timeout_usec.BCM88650=80000000
+# MIIM
+#miim_intr_enable.0=1
+miim_timeout_usec.0=300000
+
+### DRAM configuration ###
+
+# DRAM buffer (Dbuff) size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88650=1024
+
+# Number of external DRAMs.
+# Allowed values for 88650: 0/2/3/4/6/8. A value of 0 disables the DRAM.
+# Allowed values for 88660: 0/1/2/3/4/6/8. A value of 0 disables the DRAM.
+#                                          A value of 1 is permitted only in ONE WAY BYPASS ocb mode.
+ext_ram_present.BCM88650=8
+
+### Dram Tuning (Shmoo)
+# 2 = Use Dram saved config Parameters, if no Parameters Perform Shmoo on init. Default option.
+# 1 = Perform Shmoo on init.
+# 0 = Use Dram saved config Parameters, if no Parameters do nothing.
+ddr3_auto_tune.BCM88650=2
+
+### Enable BIST
+# Run Dram BIST on initialization, if BIST fail the initialization will fail. Defult: 1.
+# bist_enable_dram.BCM88650=1
+
+### Example for Dram Saved config Parameters.
+## This example is for ci=14 (Dram=7).
+#ddr3_tune_addrc_ci14=0x000000ae
+#ddr3_tune_wr_dq_wl1_ci14=0x92929292,0x92929292,0x92929292,0x92929292
+#ddr3_tune_wr_dq_wl0_ci14=0x93939393,0x93939393,0x92929292,0x92929292
+#ddr3_tune_wr_dq_ci14=0x80808080
+#ddr3_tune_vref_ci14=0x000007df
+#ddr3_tune_rd_dqs_ci14=0x96969191,0x90909191
+#ddr3_tune_rd_dq_wl1_rn_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rn_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_dq_wl1_rp_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rp_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_en_ci14=0x009d9e9d,0x00a2a3a1
+#ddr3_tune_rd_data_dly_ci14=0x00000505
+
+
+# Dram type: Select ONLY ONE of the following DRAM types, to configure all dram related parameteres per type.
+# Dram Type for Arad:
+dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_933=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_800=1
+#dram_type_DDR3_MICRON_MT41J256M16_4GBIT_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_933=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_800=1
+#dram_type_DDR3_MICRON_MT42J64M16LA_15E_667=1
+#dram_type_DDR3_SAMSUNG_K4B4G1646B_4GBIT_1066=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_933=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_800=1
+
+### Setting dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066 Parameters as Default:
+## All other dram types parameter resides in arad.soc. choosing another Dram Type will override the following parameters.
+ext_ram_t_rrd=6000
+ext_ram_columns=1024
+ext_ram_banks=8
+ext_ram_ap_bit_pos=10
+ext_ram_burst_size=32
+ext_ram_t_ref=3900000
+ext_ram_t_wr=15000
+ext_ram_t_wtr=7500
+ext_ram_t_rtp=7500
+ext_ram_freq=1066
+ext_ram_rows=16384
+ext_ram_jedec=29
+ext_ram_t_rc=46090
+ext_ram_t_rcd_rd=13090
+ext_ram_t_rcd_wr=13090
+ext_ram_t_rp=13090
+ext_ram_t_rfc=160000
+ext_ram_t_ras=33000
+ext_ram_c_wr_latency=10
+ext_ram_t_faw=35000
+ext_ram_c_cas_latency=14
+ddr3_mem_grade=0x141414
+
+# DRAM pre-configurations according to config variables which defines
+# Dram Type. supports only DDR3:
+ext_ram_type.BCM88650=DDR3
+
+# Total Dram Size (MBytes)
+# For 8 drams interfaces, 2 channel each, Each channel 2Gbit Dram. the total DRAM size is 32GBits=4000MBytes.
+ext_ram_total_size.BCM88650=4000
+
+# Total buffer size allocated for User buffer. Units: Mbytes. Default: '0x0'.
+# Supported suffix:
+#       dram - the buffer size will be subtracted from the DRAM size available for packet memory.
+#user_buffer_size=0
+#user_buffer_size_dram=50
+
+# DRAM ClamShell (interface swap its HW PIN pairs during init. Note: Only one of DRAMs can have its PIN swapped)
+# Valid values: 0/1
+#dram0_clamshell_enable.BCM88650=1
+#dram1_clamshell_enable.BCM88650=1
+
+# DRAM maximum number of crc error per buffer, buffer deleted by interrupt application.
+#dram_crc_del_buffer_max_reclaims=0
+
+### Warmboot ###
+## Scache initialization for warmboot persistent storage.
+#Save the warm boot data in a file. Allowed values: 3.
+#stable_location.BCM88650=3
+#Set the warm boot data filename.
+#stable_filename.BCM88650=./warmboot_data
+#Set the warm boot data file size (At least 10MB for PETRA-B, 4MB for ARAD)
+#stable_size.BCM88650=1000000000
+
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+## If set, always configures synthesizers, even if the configured rate is equal to
+## their nominal rate. Can be disabled to speedup bringup time (keep in mind that if
+## disabled, changing a synt to a non-nominal freq and than back to nominal will not
+## work
+#synt_over.BCM88650=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88650=100000000
+synt_ddr.BCM88650=125000000
+synt_phy.BCM88650=156250000
+synth_dram_freq.BCM88650=25
+
+#Configure the reference clock frequencies for NIF and Fabric SerDes
+# Options:  0 - 125MHZ, 1 - 156.25MHz
+serdes_nif_clk_freq.BCM88650=1
+serdes_fabric_clk_freq.BCM88650=1
+# IEEE 1588 -
+# configure clock (for 1588 debug, when Broadsync is disabled):
+#  DPLL mode/lock: 0 - eci ts pll clk disabled, 1 - configure eci ts pll clk
+#  DPLL phase/freq. Default initial: lo = 0x40000000, hi = 0x10000000.
+#phy_1588_dpll_frequency_lock.BCM88650=1
+#phy_1588_dpll_phase_initial_lo.BCM88650=0x40000000
+#phy_1588_dpll_phase_initial_hi.BCM88650=0x10000000
+# port external MAC
+#  indication whether external MAC exists or not.
+#  0: 1588 external MAC does not exist
+#  1: 1588 external MAC exists
+#  the external MAC substracts the RX time from the correction field
+#  and adds the TX time to the correction field.
+#ext_1588_mac_enable_14.BCM88650=1
+
+## Trill configurations
+# Trill mode: 0 (disabled) / 1 (coarse-grained) / 2 (fine-grained)
+#trill_mode.BCM88650=1
+
+# Trill multicast prunning mode:
+# 0: no prunning - vsi is not part of the key
+# 1: VSI prunning: Key is dist-tree,esadit-bit,VSI.
+trill_mc_prune_mode.BCM88650=0
+
+# Enable SA authentication
+#sa_auth_enabled=1
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88650=0
+logical_port_drop.BCM88650=1
+
+#logical_port_mim_in.BCM88650=2
+#logical_port_mim_out.BCM88650=4096
+
+# Enable EVB application
+#evb_enable=1
+
+# Enable Flexible QinQ application
+#vlan_translation_match_ipv4=1
+
+
+# Prepend tag to be 4 bytes or 8 bytes. Default: 4B.
+# Applicable only from ARAD+
+#prepend_tag_bytes=4B
+
+# The Prepend Tag is located at (12 + 2*offset) bytes from the start of the packet.
+# Range: 0-7. Default: 0
+#prepend_tag_offset=0
+
+# Enable ARP (next hop mac extension) feature
+bcm886xx_next_hop_mac_extension_enable.BCM88650=0
+
+# Set VLAN translate mode.
+# 0: normal
+# 1: advanced mode. Enable vlan edit settings with enhanced user control
+#bcm886xx_vlan_translate_mode=0
+
+# Set MPLS termination database mode
+# Set MPLS databases location for each MPLS namespace (L1,L2,L3)
+#bcm886xx_mpls_termination_database_mode=0
+
+# Enable , Disable MPLS indexed.
+# MPLS termination with known label stack location.
+# Must be enabled in case device supports more than 2 MPLS label terminations (L1,L2,L3)
+#mpls_termination_label_index_enable=1
+
+# Enable FastReRoute labels in device.
+#fast_reroute_labels_enable=0
+
+# Enable MPLS Context specific. Upstream label assignment in device.
+#mpls_context_specific_label_enable=0
+
+# MPLS context.
+# Can be global, per port , per interface or per port,interface.
+#mpls_context=global
+
+# MPLS TP MC reserved mac address (01-00-5E-90-00-00).
+# If set device will support My-MAC termination of reserved MC Ethernet
+#mpls_tp_mymac_reserved_address=0
+
+# MPLS ELI enable disable
+mpls_entropy_label_indicator_enable=0
+
+
+#########################################
+##cfg for BCM88640_A0 - Petra
+#########################################
+
+force_clk_m_n_divisors_zero_nif0.BCM88640_A0=0
+force_clk_m_n_divisors_zero_fabric0.BCM88640_A0=1
+force_clk_m_n_divisors_zero_comb0.BCM88640_A0=0
+
+combo_ref_clock.BCM88640=312500
+
+nif_ref_clock.BCM88640_A0=312500
+
+# Use variable cell size
+system_cell_format.BCM88640_A0=VCS128
+
+# Core clock speed (MHz)
+core_clock_speed.BCM88640_A0=300
+
+# Map bcm local port to CPU/NIF interfaces
+ucode_port_0.BCM88640_A0=CPU.0
+ucode_port_73.BCM88640_A0=CPU.1
+ucode_port_74.BCM88640_A0=CPU.2
+ucode_port_75.BCM88640_A0=CPU.3
+ucode_port_76.BCM88640_A0=CPU.4
+ucode_port_77.BCM88640_A0=CPU.5
+ucode_port_78.BCM88640_A0=CPU.6
+
+# Interlaken ports basic configuration (temporary).
+# This configuration replaces the above XAUI/RXAUI ports config
+# The following PB design constraint is not enforced in SW, so must be taken
+# care of here, when mapping ports to interfaces:
+#   If using ilkn0, port 1 (if used) must be mapped to ilkn0
+#   If using ilkn1, port 2 (if used) must be mapped to ilkn1
+#   Note that in our default mapping, port 2 is mapped to RXAUI 6, thus won't
+#   work. If one wants to use front panel port 2 with ilkn1, he should be map
+#   RAXUI6 to a port != 2.
+#ilkn_num_lanes_0.BCM88640_A0=12
+#ucode_port_1.BCM88640_A0=ILKN0.0
+#ucode_port_2.BCM88640_A0=ILKN0.1
+#ucode_port_3.BCM88640_A0=ILKN0.2
+#ilkn_num_lanes_1.BCM88640_A0=12
+#ucode_port_4.BCM88640_A0=RXAUI6
+#ucode_port_5.BCM88640_A0=ILKN1.0
+#ucode_port_6.BCM88640_A0=ILKN1.1
+#ucode_port_7.BCM88640_A0=ILKN1.2
+
+# Default header type is derived from fap_device_mode: If fap_device_mode is
+# PP, default header type is ETH. Otherwise, defualt header type is TM.
+# Header type per port can be overriden.
+# All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/INJECTED
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88640_A0=TM
+tm_port_header_type_in_0.BCM88640_A0=TM
+tm_port_header_type_out_0.BCM88640_A0=CPU
+tm_port_header_type_73.BCM88640_A0=TM
+tm_port_header_type_74.BCM88640_A0=TM
+tm_port_header_type_75.BCM88640_A0=TM
+tm_port_header_type_76.BCM88640_A0=TM
+tm_port_header_type_77.BCM88640_A0=TM
+tm_port_header_type_78.BCM88640_A0=TM
+# recycling port
+tm_port_header_type_40.BCM88640_A0=RAW
+ucode_port_40.BCM88640_A0=RCY.0
+
+# Enable ERP and OLP ports
+num_erp_tm_ports.BCM88640_A0=1
+num_olp_tm_ports.BCM88640_A0=1
+num_recycle_tm_ports.BCM88640_A0=1
+
+# Dram configuration
+# 600 Mhz
+ext_ram_pll_r.BCM88640_A0=4
+ext_ram_pll_f.BCM88640_A0=47
+ext_ram_pll_q.BCM88640_A0=1
+ext_ram_freq.BCM88640_A0=600
+
+# Dbuff size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88640_A0=1024
+
+# Number of external DRAMs.
+# Allowed values for 88x4x: 0/2/3/4/6.
+# Allowed values for 88650: 0/2/3/4/6/8.
+# ext_ram_total_size below assumed this value is 6 for 88x4x and 8 for
+ext_ram_present.BCM88640_A0=6
+
+# Dram type: Select ONLY ONE of the following DRAM types, to configure all dram
+# related parameteres per type.
+# Dram Type for Pb:
+dram_type_DDR3_MICRON_MT41J64M16_15E.BCM88640_A0=1
+#dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600.BCM88640_A0=1
+#dram_type_GDDR3_SAMSUNG_K4J52324QE.BCM88640_A0=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G.BCM88640_A0=1
+
+# QDR configuration
+# Parity. Allowed values: PARITY/ECC.
+ext_qdr_protection_type.BCM88640_A0=PARITY
+ext_qdr_size_mbit.BCM88640_A0=72
+#QDR type: QDR/QDR2P/QDR3/NONE.
+ext_qdr_type.BCM88640_A0=QDR
+
+# QDR can use the core clock, or using it's own pll. Current example is for 250MHz pll (if used).
+# QDR using own pll configuration
+#ext_qdr_use_core_clock_freq.BCM88640_A0=0
+#ext_qdr_pll_m.BCM88640_A0=4
+#ext_qdr_pll_n.BCM88640_A0=4
+#ext_qdr_pll_p.BCM88640_A0=0
+
+# QDR using core clock
+ext_qdr_use_core_clock_freq.BCM88640_A0=1
+
+#Configure MDIO. If parameter is not defined, MDIO is disabled.
+mdio_clock_freq_khz.BCM88640_A0=1000
+
+# Streaming interface configuration
+streaming_if_enable_timeoutcnt.BCM88640_A0=1
+streaming_if_timeout_prd.BCM88640_A0=70
+streaming_if_quiet_mode.BCM88640_A0=0
+streaming_if_discard_bad_parity.BCM88640_A0=0
+
+# maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88640_A0=0
+
+# multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_min.BCM88640_A0=0
+egress_multicast_direct_bitmap_max.BCM88640_A0=4095
+
+# configure flow mapping base to 0
+flow_mapping_queue_base.BCM88640_A0=0
+
+dtm_flow_mapping_mode_region_25.BCM88640_A0=0
+dtm_flow_mapping_mode_region_26.BCM88640_A0=0
+dtm_flow_mapping_mode_region_27.BCM88640_A0=0
+dtm_flow_mapping_mode_region_28.BCM88640_A0=0
+dtm_flow_mapping_mode_region_29.BCM88640_A0=0
+dtm_flow_mapping_mode_region_30.BCM88640_A0=0
+dtm_flow_mapping_mode_region_31.BCM88640_A0=0
+dtm_flow_mapping_mode_region_32.BCM88640_A0=0
+dtm_flow_mapping_mode_region_33.BCM88640_A0=1
+dtm_flow_mapping_mode_region_34.BCM88640_A0=1
+dtm_flow_mapping_mode_region_35.BCM88640_A0=1
+dtm_flow_mapping_mode_region_36.BCM88640_A0=1
+dtm_flow_mapping_mode_region_37.BCM88640_A0=1
+dtm_flow_mapping_mode_region_38.BCM88640_A0=1
+dtm_flow_mapping_mode_region_39.BCM88640_A0=1
+dtm_flow_mapping_mode_region_40.BCM88640_A0=1
+dtm_flow_mapping_mode_region_41.BCM88640_A0=1
+dtm_flow_mapping_mode_region_42.BCM88640_A0=2
+dtm_flow_mapping_mode_region_43.BCM88640_A0=2
+dtm_flow_mapping_mode_region_44.BCM88640_A0=2
+dtm_flow_mapping_mode_region_45.BCM88640_A0=2
+dtm_flow_mapping_mode_region_46.BCM88640_A0=2
+dtm_flow_mapping_mode_region_47.BCM88640_A0=2
+dtm_flow_mapping_mode_region_48.BCM88640_A0=2
+dtm_flow_mapping_mode_region_49.BCM88640_A0=2
+dtm_flow_mapping_mode_region_50.BCM88640_A0=2
+dtm_flow_mapping_mode_region_51.BCM88640_A0=2
+dtm_flow_mapping_mode_region_52.BCM88640_A0=2
+dtm_flow_mapping_mode_region_53.BCM88640_A0=2
+dtm_flow_mapping_mode_region_54.BCM88640_A0=2
+dtm_flow_mapping_mode_region_55.BCM88640_A0=2
+
+# Power up state (DOWN/UP/UP_AND_RELOCK). Can be configured per lane.
+pb_serdes_lane_power_state.BCM88640_A0=UP_AND_RELOCK
+
+# SeDes media type: Pre-configuration for tx params, according to
+# media type.
+# Allowed values: SHORT_BACKPLANE/LONG_BACKPLANE/CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type.BCM88640_A0=SHORT_BACKPLANE
+pb_serdes_lane_tx_phys_media_type_28.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_29.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_30.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_31.BCM88640_A0=CHIP2CHIP
+
+system_is_fe1600_in_system.BCM88640_A0=0
+
+# Counter engine configuration
+counter_engine_source_1.BCM88640_A0=0
+counter_engine_statistics_1.BCM88640_A0=4
+counter_engine_source_2.BCM88640_A0=1
+counter_engine_statistics_2.BCM88640_A0=4
+
+# Statistic Reporting
+stat_if_enable=0
+
+# Clock Phases: 0/90/180/270
+stat_if_phase=0
+
+# Rate in nm
+stat_if_sync_rate=0
+
+# TRUE/FALSE
+stat_if_parity_enable=FALSE
+
+# BILLING/FAP20V
+stat_if_report_mode=BILLING
+
+# Billing Mode
+# EGR_Q_NB/CUD/VSI_VLAN/BOTH_LIFS
+stat_if_report_billing_mode=VSI_VLAN
+
+# Fap20V Mode
+# QUEUE/PACKET
+stat_if_report_fap20v_mode=QUEUE
+
+# QUEUE_NUM/MC_ID (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_fabric_mc=QUEUE_NUM
+stat_if_report_fap20v_ing_mc=QUEUE_NUM
+
+# TRUE/FALSE (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_cnm_report=FALSE
+
+# TRUE/FALSE
+stat_if_report_fap20v_count_snoop=FALSE
+stat_if_report_original_pkt_size=FALSE
+stat_if_report_fap20v_single_copy_reported=FALSE
+
+schan_timeout_usec.BCM88640_A0=300000
+
+
+polled_irq_mode.BCM88640_A0=0
+polled_irq_delay.BCM88640_A0=1000
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88650: ENABLED
+# Options for 88640 compatible: DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY / 16B_STACKING_ROUTE_HISTORY
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88640=DISABLED
+
+#########################################
+##cfg for BCM88750
+#########################################
+
+fabric_device_mode.BCM88750=SINGLE_STAGE_FE2
+
+is_dual_mode.BCM88750=0
+system_is_vcs_128_in_system.BCM88750=0
+
+system_is_dual_mode_in_system.BCM88750=0
+system_is_single_mode_in_system.BCM88750=1
+
+system_is_fe600_in_system.BCM88750=0
+
+system_ref_core_clock_khz.BCM88750=600000
+
+fabric_merge_cells.BCM88750=0
+fabric_multicast_mode.BCM88750=DIRECT
+fabric_load_balancing_mode.BCM88750=NORMAL_LOAD_BALANCE
+fabric_tdm_fragment.BCM88750=0x180
+##Allows single pipe device to send TDM traffic over the fabric primary pipe - available for Fe1600_B0 only
+#change  vcs128_unicast_priority to be lower than 2 - when enabling
+fabric_tdm_over_primary_pipe.BCM88750=0
+fabric_optimize_partial_links.BCM88750=0
+vcs128_unicast_priority.BCM88750=2
+
+polled_irq_mode.BCM88750=0
+polled_irq_delay.BCM88750=1000
+
+#Selects if to run MBIST (Memory Built In Self Test) of internal memory (tables) during startup.
+#Supported values: 0=don't run, 1=run, 2=run with extra logs
+#bist_enable.BCM88650=1
+bist_enable.BCM88750=1
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88750=0
+load_firmware.BCM88750=2
+
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88750=2
+
+#enable\disable CL72
+port_init_cl72.BCM88750=0
+#Avaliable speeds for BCM88750: 5750, 6250, 10312, 11500, 12500
+port_init_speed.BCM88750=10312
+#LC PLL in\out 0=125MHz 1=156.25MHz
+serdes_fabric_clk_freq_in.BCM88750=1
+serdes_fabric_clk_freq_out.BCM88750=1
+serdes_mixed_rate_enable.BCM88750_B0=0
+
+# VSC128 or VSC256
+fabric_cell_format.BCM88750=VSC256
+
+# Core clock speed (MHz)
+core_clock_speed_khz.BCM88750=533333
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling,
+# SCHAN:
+schan_intr_enable.BCM88750=0
+schan_timeout_usec.BCM88750=300000
+# TDMA
+tdma_intr_enable.BCM88750=0
+tdma_timeout_usec.BCM88750=80000000
+# TSLAM
+tslam_intr_enable.BCM88750=0
+tslam_timeout_usec.BCM88750=80000000
+# MIIM
+miim_intr_enable.BCM88750=0
+miim_timeout_usec.BCM88750=300000
+
+
+##initialization for warmboot
+stable_location.BCM88750=3
+stable_size.BCM88750=200000
+scache_filename.BCM88750=fe1600_warmboot.mem
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+# Support (and configure on init) packet processing features.
+# If not defined - only traffic management capabilities are enabled.
+packet_processing=1
+
+## PCP (Petra Co-Processor) features
+#pcp_elk.BCM88640_A0=1
+#pcp_oam.BCM88640_A0=1
+#pcp_dma.BCM88640_A0=1
+
+## Set/Override TDM related config variables
+#tdm.BCM88640_A0=1
+
+# If set, always configures synthesizers, even if the configured rate is
+# equal to
+# their nominal rate. Can be disabled to speedup bringup time
+# (keep in mind that if disabled, changing a synt to a non-nominal freq and
+# than back to nominal will not work
+#synt_over.BCM88640_A0=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88640_A0=100000000
+synt_ddr.BCM88640_A0=125000000
+synt_phy.BCM88640_A0=156250000
+
+## Scache initialization for warmboot persistent storage.
+## Valid values: 2: Store in dram. 3: Store in a file.
+stable_location=3
+stable_filename=./warmboot_data
+stable_flags=0
+stable_size=1000000000
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88640=1
+logical_port_drop.BCM88640=-1
+
+#logical_port_mim_in.BCM88640=2
+#logical_port_mim_out.BCM88640=3
+
+## IPV6 tunnel
+bcm886xx_ipv6_tunnel_enable=1
+
+## Inlif Profile Management Mode - QoS L3 L2 marking mode
+#
+# BCM88660 ONLY
+#
+# QoS L3 L2 marking allows changing the DSCP and/or EXP values
+# of IP and/or MPLS packets according to the incoming port
+# (or inlif), and the Traffic Class/Drop Precedence.
+#
+# The inlif profile is used to control the DSCP/EXP marking.
+# This SOC property controls which mode is used for the inlif profile:
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the DSCP/EXP marking).
+# 0: Advanced mode (the user controls which inlif profile values perform DSCP/EXP marking directly).
+#bcm886xx_qos_l3_l2_marking=1
+
+## Unicast RPF mode per RIF
+#
+# This SOC property allows the user to set the unicast RPF mode - loose, strict or disabled - per RIF.
+# If disabled, the unicast RPF mode of a RIF is set globally.
+# Options: 0 / 1
+
+# bcm886xx_l3_ingress_urpf_enable=1
+
+## BOS handling mode
+# BCM8866X ONLY
+#
+# There are two ways to handle BOS, controlled by bcm886xx_mpls_termination_mode:
+# 0 - Use BOS as key in lookup.
+# 1 - Don't use it (except for reserved labels).
+#
+#bcm886xx_mpls_termination_key_mode=0
+
+# Color resolution mode allows the user to have more detailed metering color information.
+# BCM88660 ONLY
+#
+# Options: 0/1
+# 0: A red result from both Ethernet policer and policer implies DP=3.
+# 1: A red result from the policer implies that DP=2, while a red result from rate (Ethernet policer) implies DP=3.
+#policer_color_resolution_mode=1
+
+## Inlif Profile Management Mode - Disable Same Interface Filter
+# BCM8866X ONLY
+#
+# Controls which mode is used for the inlif profile management.
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the same-interface filter).
+# 0: Advanced mode (the user controls which inlif profile values have the same-interface filter disabled for them).
+#bcm886xx_logical_interface_bridge_filter_enable=1
+
+## Default Block Forwarding Strength
+#
+# Configure the default forwarding strength of blocks.
+#
+# SOC Properties:
+#block_trap_strength_vtt - VTT block forwarding strength
+#block_trap_strength_flp - FLP block forwarding strength
+#block_trap_strength_hash - SLB block forwarding strength (BCM8866X ONLY)
+#block_trap_strength_pmf_0 - PMF 1st lookup forwarding strength
+#block_trap_strength_pmf_1 - PMF 2nd lookup forwarding strength
+#
+# Options: 0-7
+
+## Stateful Load Balancing
+# BCM8866X ONLY
+#
+# Stateful Load Balancing (SLB) allows the load balancing of ECMP and LAG
+# groups to become stateful.
+# In standard load balancing, removing a member from the ECMP/LAG
+# group may affect the selected member, since the formula
+# depends on group size.
+# In stateful load balancing the member is selected once and saved.
+# Later, the member is always retrieved, and does not depend on
+# the size of the LAG/ECMP group.
+#
+# resilient_hash_enable - Enable/disable SLB. Values:
+# 1 - Enable SLB.
+# 0 - Disable SLB.
+#resilient_hash_enable=1
+
+
+#Make Arad SOC properties work for Arad+, by mapping the BCM88660 suffix to BCM88650
+soc_family.BCM88660=BCM88650
+#Make Arad SOC properties work for Ardon, by mapping the BCM88202 suffix to BCM88650
+soc_family.BCM88202=BCM88650
+
+# Use different mymac addresses for ipv4 and ipv6 when using vrrp for mymac termination.
+#l3_vrrp_ipv6_distinct=1
+
+# Enable multiple mymac termination mode. In order to enable it, also set l3_vrrp_ipv6_distinct=0 and 
+# l3_vrrp_max_vid=0 since vrrp and  multiple mymac mode can't co exist.
+#l3_multiple_mymac_termination_enable=1
+
+# Distinguish between ipv4 and all other l3 protocols when multiple mymac terminating 
+#l3_multiple_mymac_termination_mode=1
+
+# Usually the final DP given by the meter (or the In-DP) is unchanged, and can be from 0-3.
+# When this SOC property is set to 1, when the final INGRESS DP is 2, it is mapped to 1 instead, 
+# and thus only the values 0-1 and 3 can be output.
+# This has no effect when policer_color_resolution_mode=1.
+#custom_feature_always_map_result_dp_2_to_1=1
+
+#
+# Enable L3 Source Binds for DPoE SAV
+#
+l3_source_bind_mode=IP
+l3_source_bind_subnet_mode=IP
+ipv4_num_vrfs = 4096
+
+#
+# Enable ARP checking for L3 Source Binds
+#
+# This feature is not currently used.
+#
+# Valid values for custom_feature_l3_source_bind_arp_relay:
+#    0 - disabled
+#    1 - downstream ARP checking
+#    2 - upstream ARP checking
+#    3 - both downstream and upstream ARP checking
+#
+#custom_feature_l3_source_bind_arp_relay=2
diff --git a/bal_release/3rdparty/bcm-sdk/rc/bal/readme.txt b/bal_release/3rdparty/bcm-sdk/rc/bal/readme.txt
new file mode 100644
index 0000000..65ea330
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/bal/readme.txt
@@ -0,0 +1,12 @@
+This directory contains bcm files that are needed in the BAL file system to bring up 
+the bal_core or bal_op_agent.
+For bal_op_agent,
+User should also copy the bal_autostart.ini from P4 BAL branch ~cur/scripts/ to the same BAL file system.
+
+The currently supported bcm_sdk version is 6.5.3
+.
+|-- bal_config.ini
+|-- config.bcm
+`-- rpc.soc.template 
+  
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/bal/rpc.soc.template b/bal_release/3rdparty/bcm-sdk/rc/bal/rpc.soc.template
new file mode 100755
index 0000000..f119730
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/bal/rpc.soc.template
@@ -0,0 +1,25 @@
+cpudb newdb
+
+cpudb add key=0x1 local=t
+
+cpudb add key=0x2
+
+cts atp trans sock server start
+
+cts atp cos=0 vlan=1
+
+cte reg mode=atp
+
+# DIP token is to be replaced by an IP address supplied by application's command line option. Please do not remove or change this line - it is mandatory.
+cts atp trans sock inst dk=0x2 dip=$DIP$
+
+rpc nonexthop
+
+rpc start
+
+dispatch attach 2 client 0 0x2
+
+sleep 1
+
+cte echo string="!> tr 141" mode=atp dk=0x2
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/kt2/bal.soc b/bal_release/3rdparty/bcm-sdk/rc/kt2/bal.soc
new file mode 100755
index 0000000..d209d10
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/kt2/bal.soc
@@ -0,0 +1,20 @@
+port xe0,xe1,xe2,xe3,xe4,xe5 lanes 4
+
+cpudb newdb
+
+cpudb add key=0x1
+
+cpudb add key=0x2 local=t
+
+cts atp trans sock server start
+
+cts atp cos=0 vlan=1
+
+cte reg mode=atp
+
+cts atp trans sock inst dk=0x1 dip=10.25.8.25
+
+rpc nonexthop
+
+rpc start
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/kt2/bcm.user b/bal_release/3rdparty/bcm-sdk/rc/kt2/bcm.user
new file mode 100755
index 0000000..0e3d484
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/kt2/bcm.user
Binary files differ
diff --git a/bal_release/3rdparty/bcm-sdk/rc/kt2/linux-kernel-bde.ko b/bal_release/3rdparty/bcm-sdk/rc/kt2/linux-kernel-bde.ko
new file mode 100755
index 0000000..5031d17
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/kt2/linux-kernel-bde.ko
Binary files differ
diff --git a/bal_release/3rdparty/bcm-sdk/rc/kt2/linux-user-bde.ko b/bal_release/3rdparty/bcm-sdk/rc/kt2/linux-user-bde.ko
new file mode 100755
index 0000000..0f54e9b
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/kt2/linux-user-bde.ko
Binary files differ
diff --git a/bal_release/3rdparty/bcm-sdk/rc/kt2/rc.soc b/bal_release/3rdparty/bcm-sdk/rc/kt2/rc.soc
new file mode 100755
index 0000000..7bf9ce4
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/kt2/rc.soc
@@ -0,0 +1,1686 @@
+# $Id: rc.soc 1.192 Broadcom SDK $
+# $Copyright: Copyright 2012 Broadcom Corporation.
+# This program is the proprietary software of Broadcom Corporation
+# and/or its licensors, and may only be used, duplicated, modified
+# or distributed pursuant to the terms and conditions of a separate,
+# written license agreement executed between you and Broadcom
+# (an "Authorized License").  Except as set forth in an Authorized
+# License, Broadcom grants no license (express or implied), right
+# to use, or waiver of any kind with respect to the Software, and
+# Broadcom expressly reserves all rights in and to the Software
+# and all intellectual property rights therein.  IF YOU HAVE
+# NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE
+# IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+# ALL USE OF THE SOFTWARE.  
+#  
+# Except as expressly set forth in the Authorized License,
+#  
+# 1.     This program, including its structure, sequence and organization,
+# constitutes the valuable trade secrets of Broadcom, and you shall use
+# all reasonable efforts to protect the confidentiality thereof,
+# and to use this information only in connection with your use of
+# Broadcom integrated circuit products.
+#  
+# 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS
+# PROVIDED "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+# REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+# OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+# DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+# NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+# ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+# CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING
+# OUT OF USE OR PERFORMANCE OF THE SOFTWARE.
+# 
+# 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
+# BROADCOM OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL,
+# INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER
+# ARISING OUT OF OR IN ANY WAY RELATING TO YOUR USE OF OR INABILITY
+# TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF
+# THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR USD 1.00,
+# WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING
+# ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.$
+#
+# Initialization RC (run commands) file
+#
+#       These are default commands that are read and executed by default
+#       when BCM boots up.  Typically this file is called rc.soc and resides
+#       in the flash filesystem, NVRAM, or disk.
+#
+# Board Configuration Setting
+#
+#       This file uses configuration properties to know on which board
+#       it is running.  Currently one of following settings must be made:
+#
+#       BCM95670K8          config add herc8=1
+#       BCM95690K24         config add draco_b2b=1
+#       BCM95690K24S        config add draco_stk=1
+#       BCM95690R24         config add galahad=1
+#       BCM95690R24S        config add merlin=1
+#       BCM95690R48S        config add lancelot=1
+#       BCM95691K12         config add draco_k12=1
+#       White Knight        config add white_knight=1 (not shipping)
+#       Black Knight        config add black_knight=1 (not shipping)
+#       BCM95673K2S         config add twolynx=1
+#       BCM95673R8          config add herculynx=1
+#       BCM95673R24S        config add lynxalittle=1
+#       BCM95673R48S        config add lynxalot=1
+#       BCM95695P24SX_10    config add guenevere=1
+#       BCM95650K24         config add magnum=1 (automatic for 5650L)
+#       BCM95675            config add herc8_15=1
+#       BCM95650R24         config add tuc24_ref=1
+#       BCM95695P48LM       config add lm48p=1
+#       BCM95695P48LM-10    config add lm48p_B=1
+#       BCM956504P48LM-10   config add lm48p_C=1
+#       BCM956504P48LM-20   config add lm48p_C=1
+#       BCM956504P48LM-50   config add lm48p_D=1
+#       BCM956504P48POEREF  config add fbpoe=1
+#       BCM956504P24REF P0  config add fb24=1
+#       BCM956504P24    P0  config add fb24=1
+#       BCM956102P48        config add felix48=1
+#       BCM953300P24REF     config add mirage24=1
+#       BCM956800K20C       config add bradley_1g=1
+#       BCM956700K16        config add humv=1
+#       BCM956800K20        config add bradley=1
+#       BCM956580K16        config add goldwing=1
+#       BCM956314P24REF     config add bcm56314p24ref=1
+#       BCM956024P48REF     config add BCM956024P48REF=1
+#       BCM956224P48REF     config add BCM956224P48REF=1
+#       BCM956224R50T       config add BCM956224R50T=1
+#       BCM956024R50T       config add BCM956024R50T=1
+#       BCM56820K24XG       config add BCM56820K24XG=1
+#       BCM953314R24GS      config add BCM953314R24GS=1
+#       BCM953314K24        config add BCM953314K24=1
+#       BCM956820R24XG      config add BCM956820R24XG=1
+
+if $?BCM56146_A0 \
+    'local BCM56146 1'
+
+if $?BCM56147_A0 \
+    'local BCM56147 1'
+
+
+if $?1 "echo rc: arguments not supported; exit"
+if !$?unit "echo rc: no current unit; exit"
+
+echo "rc: unit $unit device $devname"
+local quiet no
+local echo echo
+local rcdone \$rc$unit
+if !"expr $rcdone + 0" "local echo noecho; local quiet yes"
+
+# Set convenience local variables
+
+# simulation related
+#if $?plisim \
+#       "local no_bcm 1"
+if $?quickturn || $?plisim \
+	"local simulator 1"
+
+# board related
+if $?galahad \
+	"local draco_b2b 1"
+if $?black_knight || $?white_knight || $?merlin \
+	"local draco_herc4 1"
+
+# chip related
+if $?PETRAB_A0 \
+    'rcload dune.soc ; exit'
+
+
+if $?BCM88750_A0 || $?BCM88750_B0 || $?BCM88755_B0 || $?BCM88754_A0\
+    'rcload dfe.soc ; exit'
+
+if $?ARAD_A0 || $?ARAD_B0 || $?ARAD_B1 || $?BCM88650_A0 || $?BCM88650_B0 || $?BCM88650_B1 || $?BCM88350_B1 || $?BCM88351_B1 || \
+   $?BCM88450_B1 || $?BCM88451_B1 || $?BCM88550_B1 || $?BCM88551_B1 || $?BCM88552_B1 || $?BCM88651_B1 || $?BCM88654_B1 || $?ARADPLUS_A0 || $?BCM88360_A0 || $?BCM88361_A0 || \
+   $?BCM88460_A0 || $?BCM88461_A0 || $?BCM88560_A0 || $?BCM88561_A0 || $?BCM88562_A0 || $?BCM88661_A0 || $?BCM88664_A0  \
+    'rcload arad.soc ; exit'
+
+if $?BCM88850_P3 \
+    'exit'
+
+
+
+
+
+
+if $?ACP \
+    'exit'
+        
+if !"expr $pcidev + 0 == 0x5650" \
+	"local magnum 1"
+if $?drac || $?drac15 \
+	"local drac_any 1"
+if $?lynx || $?lynx15 \
+	"local lynx_any 1"
+if $?tucana || $?magnum \
+	"local tucana_any 1"
+if $?herc || $?herc15 \
+	"local herc_any 1"
+if $?firebolt || $?firebolt2 || $?helix || \
+   $?felix || $?helix15 || $?felix15 || $?raptor || $?raven || $?hawkeye\
+	"local firebolt_any 1"
+if !"expr $pcidev + 0 == 0xb501" \
+	"local firebolt_10x4 1"
+if $?easyrider \
+	"local easyrider_any 1"
+if !"expr $pcidev + 0 == 0xb602" \
+	"local easyrider_1x1 1"
+if $?bradley || $?humv || $?goldwing \
+	"local bradley_any 1"
+if $?drac_any || $?lynx_any || $?tucana_any \
+	"local xgs12_switch 1"
+if $?firebolt_any || $?easyrider_any || $?bradley_any \
+	"local xgs3_switch 1"
+if $?xgs12_switch || $?xgs3_switch \
+	"local xgs_switch 1"
+if $?herc_any \
+	"local xgs_fabric 1"
+if $?xgs_fabric || $?xgs_switch \
+	"local xgs 1"
+if !$?xgs \
+	"local strata 1"
+if $?strata && !$?gsl \
+	"local PBMP_ALL 0x0bffffff"
+if $?strata && $?gsl \
+	"local PBMP_ALL 0x080000ff"
+if $?BCM56214_A0 || $?BCM56014_A0 || $?BCM56215_A0 || \
+   $?BCM56214_A1 || $?BCM56014_A1 || $?BCM56215_A1 && \
+   !$?BCM956024P48REF \
+	"local rap24_ref 1"
+
+if $?BCM5655_A0 || $?BCM5655_B0 \
+        "local tucana_nohg 1"
+
+if $?BCM956024P48REF || $?BCM956224P48REF || $?BCM956024R50T || \
+   $?BCM956224R50T \
+        "local raven_eb_48p 1"
+
+if $?BCM953314R24GS \
+        "local hawkeye_p24 1"
+
+if $?BCM953314K24 \
+        "local hawkeye_k24 1"
+
+if $?firebolt_any && $?lm48p || $?lm48p_D \
+        "config add lmfb48=1"
+
+# Set software's wait for S-Channel response to 3 seconds for QuickTurn
+# (Recommend at least 10 seconds if the ARL is 100% busy with inserts.)
+if $?quickturn	"stimeout 3000000"
+if $?plisim	"stimeout 60000000"
+
+# Direct phy led programming: 5464 activity led becomes link/activity
+if $?drac_any && $?lancelot || $?lynxalot || $?guenevere \
+	"config add phy_led_ctrl=0x18"
+
+# Shutdown threads if system is already running
+if $?triumph3 \
+	"ibodSync off"
+counter off
+linkscan off
+if $?feature_arl_hashed && !$?simulator \
+        "l2mode off"
+if $?feature_ces && $?BCM56440_A0 \
+        "ces off"
+
+# Test on-chip memory before initializing
+#if !$?simulator "init soc; bist l3 arl cbp"
+init soc
+
+# Initialize miscellaneous chip registers
+init misc
+
+# Initialize external TCAM if necessary
+# NOTE : tcam is initialized during "init misc" unless 
+#        tcam_reset_toggle = 1 is configured
+if "expr $rcdone + 0" && !"expr $tcam_reset_toggle + 0" \
+        "dispatch attach 0 esw 0"
+if !"expr $tcam_reset_toggle + 0" "muxsel 0; muxsel 0x80"
+if !"expr $tcam_reset_toggle + 0" "init tcam; $echo rc: TCAM initialized"
+
+# Initialize the StrataSwitch MMU registers
+init mmu
+
+# Uncomment to turn off Single-Bit Error reporting on 5670
+#if $?herc "m mmu_intcntl pp_sbe_en=0"
+
+# Initialize Cell Free Address Pool
+# NOTE: this should NOT be done unless chip is known to have bad CFAP
+# memory entries that need to be mapped out.
+if $?cfap_tests "$echo rc: Initializing CFAP; cfapinit"
+
+$echo rc: MMU initialized
+
+#
+# Load uKernel
+#
+
+if $?feature_cmicm && !$?rcpu_only && !$ihost_mode\
+    "mcsload 0 ${drivername}_0.srec InitMCS=true; \
+     mcsload 1 ${drivername}_1.srec;"
+
+#
+# Init CLI and BCM API
+#
+# This must be done after the raw register writes to avoid having state
+# clobbered.  NOTE: Tables are cleared by "init bcm" below.  If
+# table modifications are required, put them after "init bcm".  Some
+# registers might also be affected.
+#
+
+if !$?no_bcm \
+	"init bcm; \
+	 $echo rc: BCM driver initialized"
+
+if $?no_bcm \
+	"$echo rc: *** NOT initializing BCM driver ***"
+
+if $?no_bcm && $?strata \
+    'write vtable 0 1 VLAN_TAG=0,PORT_BITMAP=0,UT_PORT_BITMAP=0; \
+     insert vtable VLAN_TAG=1,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+     local pv \
+         VLAN_TAG=1,SP_ST=3,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+	 write ptable 0 32 PTYPE=0; \
+	 if !$?gsl "write ptable 0 24 $pv,PTYPE=1"; \
+	 if !$?gsl "write ptable 24 2 $pv,PTYPE=2"; \
+	 if $?gsl  "write ptable 0 8 $pv,PTYPE=2"; \
+	 write ptable 27 1 $pv,PTYPE=3; \
+     local pv'
+
+# Turn on mirroring of hardware ARL operations into software ARL table.
+if $?feature_arl_sorted \
+	"arlmode intr_dma; \
+	 $echo rc: ARL DMA shadowing enabled"
+
+if $?feature_arl_hashed && !$?simulator && !$?rcpu_only \
+	"l2mode interval=3000000; \
+	 $echo rc: L2 Table shadowing enabled"
+
+# If running BCM library, start linkscan task and set port modes
+
+if !$?no_bcm && !$?rcpu_only \
+	"linkscan 250000; \
+	 port fe,ge linkscan=on autoneg=on \
+		speed=0 fullduplex=true txpause=true rxpause=true; \
+	 port st linkscan=on txpause=false rxpause=false; \
+         port xe,ce linkscan=on autoneg=off \
+                speed=0 fullduplex=true txpause=true rxpause=true; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?rcpu_only \
+	"linkscan 250000; \
+	 port e linkscan=on; \
+	 port st linkscan=on; \
+     port xe linkscan=on; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?shadow \
+     "port il linkscan=on; \
+	  $echo rc: Interlaken Port mode initialized"
+
+# No spanning tree is running, so put ports all in the forwarding state
+# stp support not available for shadow device.
+
+if !$?no_bcm && !$?shadow \
+	"stg stp 1 all forward"
+
+# Start counter task unless already started by "init bcm" above.
+if $?plisim "local dma false"
+if !$?plisim "local dma true"
+if $?device_eb_vli "local dma false"
+if $?no_bcm && !$?rcpu_only\
+	"counter Interval=1000 Pbm=all Dma=$dma; \
+	 $echo rc: Counter collection enabled"
+if $?rcpu_only \
+	"counter Interval=2000000 Pbm=all Dma=false; \
+	 $echo rc: Counter collection enabled"
+
+# Resynchronize the saved values kept by the 'show counter' command.
+if !$?simulator \
+    "counter sync"
+
+# By default, dump data of packets that go to CPU.
+if !$?testinit \
+	"pw report +raw"
+
+# Default LED processor program for various SDKs and reference designs.
+# Source code can be found in $SDK/led/examples.
+
+if !$?p48 "local ledcode '\
+ E0 28 60 7F 67 2F 67 6B 06 7F 80 D2 1A 74 01 12 \
+ 7E 85 05 D2 0F 71 19 52 00 12 7D 85 05 D2 1F 71 \
+ 23 52 00 12 7C 85 05 D2 05 71 2D 52 00 3A 68 32 \
+ 00 97 75 3B 12 A0 FE 7F 02 0A 50 32 01 97 75 47 \
+ 12 BA FE 7F 02 0A 50 12 BA FE 7F 95 75 59 85 12 \
+ A0 FE 7F 95 75 A8 85 77 9A 12 A0 FE 7F 95 75 63 \
+ 85 77 A1 16 7C DA 02 71 A1 77 A8 32 05 97 71 76 \
+ 06 7D D2 01 71 9A 06 7F 67 93 75 9A 32 02 97 71 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 7E D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5605.hex
+
+if $?p48 "local ledcode '\
+ E0 28 60 7F 67 43 67 3C 67 35 67 2F 06 7F 80 D2 \
+ 18 74 01 28 60 7F 67 9B 67 89 67 BF 67 83 67 3C \
+ 67 73 67 68 67 5D 06 7F 80 D2 1A 74 13 3A 70 67 \
+ AD 71 C3 77 BF 32 03 97 71 C3 77 BF 32 05 97 71 \
+ C3 77 BF 12 BA FE 7F 32 01 97 75 4F 02 06 50 32 \
+ 00 97 75 57 02 06 50 95 75 C3 85 77 BF 67 AD 75 \
+ BF 32 04 97 71 C3 77 BF 67 AD 75 BF 32 03 97 71 \
+ C3 77 BF 67 AD 75 BF 32 03 97 71 BF 32 04 97 71 \
+ BF 77 C3 67 B6 71 C3 77 BF 12 A0 FE 7F 32 00 97 \
+ 75 95 02 06 50 95 75 C3 85 77 BF 12 BA FE 7F 32 \
+ 01 97 75 A7 02 06 50 95 75 C3 85 77 BF 06 7F 12 \
+ 80 F8 15 1A 00 57 06 7F 12 80 F8 15 1A 07 57 32 \
+ 0F 87 57 32 0E 87 57'"					# p48.hex
+
+if $?herc && !$?black_knight "local ledcode '\
+ 02 01 67 36 29 32 08 D7 87 32 07 D7 87 32 01 D7 \
+ 87 32 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 \
+ 74 24 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 \
+ 87 91 74 2D 3A 28 10 DA 07 75 3E FA 02 57 EA 06 \
+ 57'"							# sdk5670.hex
+
+if $?herc && $?black_knight "local ledcode '\
+ 2A 03 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 00 \
+ D7 87 2A 06 32 08 D7 87 32 07 D7 87 32 01 D7 87 \
+ 32 00 D7 87 3A 08'"					# knigget.hex
+
+if $?drac_any "local ledcode '\
+ E0 28 60 C3 67 4E 67 8A 06 C3 80 D2 0C 74 01 28 \
+ 60 C3 32 00 D7 87 32 01 D7 87 32 07 D7 87 32 08 \
+ D7 87 32 0F 87 32 0F 87 32 0F 87 32 0F 87 12 C2 \
+ 85 05 D2 0F 71 38 52 00 12 C1 85 05 D2 1F 71 42 \
+ 52 00 12 C0 85 05 D2 05 71 4C 52 00 3A 38 32 00 \
+ 97 75 5A 12 A0 FE C3 02 0A 50 32 01 97 75 66 12 \
+ AD FE C3 02 0A 50 12 AD FE C3 95 75 78 85 12 A0 \
+ FE C3 95 75 C0 85 77 B9 12 A0 FE C3 95 75 82 85 \
+ 77 C7 16 C0 DA 02 71 C7 77 C0 32 05 97 71 9A 32 \
+ 02 97 71 B9 06 C1 D2 01 71 B9 06 C3 67 B2 75 B9 \
+ 32 03 97 71 C0 32 04 97 75 C7 06 C2 D2 07 71 C7 \
+ 77 C0 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5690.hex
+
+if $?draco_k12 "local ledcode '\
+ 02 0B A2 01 28 A2 01 60 C3 67 32 67 6E 06 C3 90 \
+ 75 02 12 C2 85 05 D2 0F 71 1C 52 00 12 C1 85 05 \
+ D2 1F 71 26 52 00 12 C0 85 05 D2 05 71 30 52 00 \
+ 3A 30 32 00 97 75 3E 12 A0 FE C3 02 0A 50 32 01 \
+ 97 75 4A 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 \
+ 5C 85 12 A0 FE C3 95 75 A6 85 77 9F 12 A0 FE C3 \
+ 95 75 66 85 77 AD 16 C0 DA 02 71 AD 77 A6 32 05 \
+ 97 71 7E 32 02 97 71 9F 06 C1 D2 01 71 9F 06 C3 \
+ 67 96 75 9F 32 03 97 71 A6 32 04 97 75 AD 06 C2 \
+ D2 07 71 AD 77 A6 12 80 A2 01 F8 15 1A 00 57 32 \
+ 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 \
+ 32 0E 87 57'"						# k12-5690.hex
+
+if $?herc && $?white_knight "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 07 \
+ D7 87 32 01 D7 87 32 00 D7 87 57'"			# wk5670.hex
+
+if $?herc && $?merlin "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"			# merlin5670.hex
+
+if $?herc && $?lancelot "local ledcode '\
+ 2A 05 67 12 2A 06 67 12 2A 03 67 12 2A 04 67 12 \
+ 3A 10 32 08 D7 87 32 00 D7 87 32 01 D7 87 32 07 \
+ D7 87 57'"						# lancelot.hex
+
+if $?xgs_fabric && $?guenevere "local ledcode '\
+ 2A 04 67 0A 2A 05 67 0A 3A 04 32 07 D7 87 32 00 \
+ 32 01 B7 D7 87 57'"                                    # guenevere5670.hex
+
+if $?drac_any && $?white_knight "local ledcode '\
+ E0 28 60 C3 67 2f 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# wk5690.hex
+
+if $?drac_any && $?merlin "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# merlin5690.hex
+
+if $?drac_any && $?galahad "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# galahad.hex
+
+if $?drac_any && $?lm "local ledcode '\
+E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+32 0F 87 57 32 0F 87 32 0E 87 57'"      # lm5690.hex
+
+if $?twolynx "local ledcode '\
+ 2A 01 67 0A 2A 00 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"                 # twolynx.hex
+
+if $?lynx_any && $?herculynx || $?lynxalot || $?lm || $?guenevere \
+	"local ledcode '\
+12 C0 85 05 D2 03 71 0A 52 00 2A 00 67 10 3A 04 \
+32 08 D7 87 06 C0 D2 01 71 22 32 0F 87 32 0F 87 \
+77 2A 32 00 D7 87 32 01 D7 87 32 07 D7 87 57'"      # herculynx.hex
+
+if $?tucana && !$?magnum "local ledcode '\
+ E0 67 23 D2 18 74 01 02 20 67 23 D2 38 74 09 02 \
+ 18 67 23 D2 1C 74 11 E9 02 80 45 80 81 DA 0D 74 \
+ 1A 3A 68 28 60 E3 67 4A 67 36 06 E4 30 87 06 E5 \
+ 30 87 06 E3 80 57 32 00 97 71 45 32 01 97 71 45 \
+ 02 0F 60 E5 57 02 0E 60 E5 57 06 E3 12 A0 F8 15 \
+ 1A 00 75 59 02 0E 60 E4 57 02 0F 60 E4 57'"        # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC 67 5A 67 9C 06 FA 67 DA 06 FB 67 DA \
+ 06 FC 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0E 74 51 3A 70 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 D7 85 77 D1 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 D4 16 FF DA 02 02 FA 71 D4 77 D7 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 D1 06 FC 67 CA 02 FB 75 \
+ D1 32 02 97 71 D1 32 03 97 71 D7 32 04 97 75 D4 \
+ 06 FD D2 07 02 FB 71 D4 77 D7 12 A0 F8 15 1A 00 \
+ 57 42 00 57 42 01 57 42 02 57 D2 02 74 E3 32 0F \
+ 87 77 E6 32 0E 87 D2 01 74 EE 32 0F 87 57 32 0E \
+ 87 57'"                                            # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 75 09 A2 01 60 FC 28 67 37 67 73 \
+ 06 FB 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 3A 70 32 00 97 75 43 12 C0 FE FC \
+ 02 0A 50 32 01 97 75 4F 12 DC FE FC 02 0A 50 12 \
+ DC FE FC 95 75 61 85 12 C0 FE FC 95 75 B0 85 77 \
+ A2 12 C0 FE FC 95 75 6B 85 77 A9 16 FF DA 02 71 \
+ A9 77 B0 32 05 97 71 7E 06 FE D2 01 71 A2 06 FC \
+ 67 9B 75 A2 32 02 97 71 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 FD D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0F 87 32 0F 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57'"                            # magnum_sdk.hex
+
+if $?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 71 10 60 FC 28 67 D0 67 C0 77 19 \
+ A2 01 60 FC 28 67 40 67 7C 06 FB 80 D2 1C 74 01 \
+ 12 FD 85 05 D2 0F 71 2A 52 00 12 FE 85 05 D2 1F \
+ 71 34 52 00 12 FF 85 05 D2 05 71 3E 52 00 3A 68 \
+ 32 00 97 75 4C 12 C0 FE FC 02 0A 50 32 01 97 75 \
+ 58 12 DC FE FC 02 0A 50 12 DC FE FC 95 75 6A 85 \
+ 12 C0 FE FC 95 75 B9 85 77 AB 12 C0 FE FC 95 75 \
+ 74 85 77 B2 16 FF DA 02 71 B2 77 B9 32 05 97 71 \
+ 87 06 FE D2 01 71 AB 06 FC 67 A4 75 AB 32 02 97 \
+ 71 AB 32 03 97 71 B9 32 04 97 75 B2 06 FD D2 07 \
+ 71 B2 77 B9 12 A0 F8 15 1A 00 57 32 0F 87 32 0F \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 \
+ 02 0E 32 00 97 71 CD 32 01 97 71 CD 80 30 87 57 \
+ 06 FC 12 A0 F8 15 1A 00 02 0F 75 DD 90 30 87 57'"  # magnum.hex
+
+if $?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC D2 18 71 0E 67 E9 67 D9 77 1A 67 5A \
+ 67 9C 06 FA 67 D0 06 FB 67 D0 06 FC 80 D2 1C 74 \
+ 01 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0D 74 51 3A 68 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 CD 85 77 C7 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 CA 16 FF DA 02 02 FA 71 CA 77 CD 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 C7 06 FC 67 C0 02 FB 75 \
+ C7 32 02 97 71 C7 32 03 97 71 CD 32 04 97 75 CA \
+ 12 A0 F8 15 1A 00 57 42 FF 57 42 FE 57 42 EF 57 \
+ 30 87 98 98 98 98 30 87 57 02 0E 32 00 97 71 E6 \
+ 32 01 97 71 E6 80 30 87 57 06 FC 12 A0 F8 15 1A \
+ 00 02 0F 75 F6 90 30 87 57'"                       # tuc24_ref.hex
+
+if $?herc8_15 "local ledcode '\
+ 02 01 28 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 \
+ 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 74 22 \
+ 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 87 91 \
+ 74 2B 3A 28'"                                      # sdk5675.hex
+
+if $?drac_any && $?lm "local ledcode '\
+ E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+ 00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+ 75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+ C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+ A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+ C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+ 71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+ 71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57 00 00 00 00 00'"  # lm5690.hex
+
+if $?drac_any && $?lm48p "local ledcode '\
+ E0 28 60 C3 67 7C 06 C3 80 28 60 C3 67 7C 67 40 \
+ 06 C3 90 28 60 C3 67 40 06 C3 80 80 D2 0C 74 01 \
+ 12 C2 85 05 D2 0F 71 2A 52 00 12 C1 85 05 D2 1F \
+ 71 34 52 00 12 C0 85 05 D2 05 71 3E 52 00 3A 30 \
+ 32 00 97 75 4C 12 A0 FE C3 02 0A 50 32 01 97 75 \
+ 58 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 6A 85 \
+ 12 A0 FE C3 95 75 B9 85 77 AB 12 A0 FE C3 95 75 \
+ 74 85 77 B2 16 C0 DA 02 71 B2 77 B9 32 05 97 71 \
+ 8C 32 02 97 71 AB 06 C1 D2 01 71 AB 06 C3 67 A4 \
+ 75 AB 32 03 97 71 B9 32 04 97 75 B2 06 C2 D2 07 \
+ 71 B2 77 B9 12 80 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695.hex
+
+if $?drac_any && $?lm48p_B "local ledcode '\
+ E0 28 60 C3 67 79 06 C3 67 3D 06 C3 80 28 60 C3 \
+ 67 3D 06 C3 67 79 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 27 52 00 12 C1 85 05 D2 1F 71 31 52 \
+ 00 12 C0 85 05 D2 05 71 3B 52 00 3A 30 32 00 97 \
+ 75 49 12 A0 FE C3 02 0A 50 32 01 97 75 55 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 67 85 12 A0 FE \
+ C3 95 75 B6 85 77 A8 12 A0 FE C3 95 75 71 85 77 \
+ AF 16 C0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 C1 D2 01 71 A8 06 C3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 C2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695_10.hex
+
+if $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 55 67 91 06 E3 80 28 60 E3 67 91 \
+ 67 55 06 E3 80 D2 18 74 01 28 60 E3 67 B9 75 26 \
+ 67 CE 67 55 77 2E 32 0E 87 32 08 87 67 C0 06 E3 \
+ 80 D2 1C 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 3A 70 32 00 97 75 61 12 A0 FE E3 02 0A \
+ 50 32 01 97 75 6D 12 BC FE E3 02 0A 50 12 BC FE \
+ E3 95 75 7F 85 12 A0 FE E3 95 75 CE 85 77 C0 12 \
+ A0 FE E3 95 75 89 85 77 C7 16 E0 DA 02 71 C7 77 \
+ CE 32 05 97 71 A1 32 02 97 71 C0 06 E1 D2 01 71 \
+ C0 06 E3 67 B9 75 C0 32 03 97 71 CE 32 04 97 75 \
+ C7 06 E2 D2 07 71 C7 77 CE 12 80 F8 15 1A 00 57 \
+ 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F \
+ 87 32 0E 87 57'"  # sdk56504.hex
+
+#Led program for new rev of FB SDK and Ref design
+if $?firebolt_any && !$?fb24 "local ledcode '\
+ E0 28 60 E3 67 4B 67 87 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AF 75 1C 67 C4 67 4B 77 24 32 0E 87 32 \
+ 08 87 67 B6 06 E3 80 D2 1C 74 0F 12 E2 85 05 D2 \
+ 0F 71 35 52 00 12 E1 85 05 D2 1F 71 3F 52 00 12 \
+ E0 85 05 D2 05 71 49 52 00 3A 70 32 00 97 75 57 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 63 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 75 85 12 A0 FE E3 95 \
+ 75 C4 85 77 B6 12 A0 FE E3 95 75 7F 85 77 BD 16 \
+ E0 DA 02 71 BD 77 C4 32 05 97 71 97 32 02 97 71 \
+ B6 06 E1 D2 01 71 B6 06 E3 67 AF 75 B6 32 03 97 \
+ 71 C4 32 04 97 75 BD 06 E2 D2 07 71 BD 77 C4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56504ref.hex
+
+#Override Default Firebolt LED program for Line Module
+if $?lm && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 79 06 E3 67 3D 06 E3 80 28 60 E3 \
+ 67 3D 06 E3 67 79 06 E3 80 D2 18 74 01 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 60 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B6 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AF 16 E0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 E2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # lm48p56504.hex
+
+#Override Default Firebolt LED program for Line Module -50 version
+if $?lm && $?lm48p_D && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 6D 06 E3 67 31 06 E3 80 D2 18 74 \
+ 01 12 E2 85 05 D2 0F 71 1B 52 00 12 E1 85 05 D2 \
+ 1F 71 25 52 00 12 E0 85 05 D2 05 71 2F 52 00 3A \
+ 60 32 00 97 75 3D 12 A0 FE E3 02 0A 50 32 01 97 \
+ 75 49 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 5B \
+ 85 12 A0 FE E3 95 75 AA 85 77 9C 12 A0 FE E3 95 \
+ 75 65 85 77 A3 16 E0 DA 02 71 A3 77 AA 32 05 97 \
+ 71 7D 32 02 97 71 9C 06 E1 D2 01 71 9C 06 E3 67 \
+ 95 75 9C 32 03 97 71 AA 32 04 97 75 A3 06 E2 D2 \
+ 07 71 A3 77 AA 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'" # lm48p56504_50.hex
+
+if $?lm && $?firebolt_10x4 "local ledcode '\
+ 02 18 28 32 07 67 1E 75 0A D7 87 32 01 D7 87 32 \
+ 00 D7 87 32 08 D7 87 80 D2 1C 74 02 3A 0C 12 80 \
+ F8 15 1A 00 57 '" # lm12pcx456501.hex
+
+if $?fbpoe && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 85 67 49 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AD 75 1A 67 C2 77 20 32 0E 87 32 08 87 \
+ 67 49 06 E3 80 D2 1A 74 0F 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 32 00 97 75 55 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 61 12 BA FE E3 02 0A \
+ 50 12 BA FE E3 95 75 73 85 12 A0 FE E3 95 75 C2 \
+ 85 77 B4 12 A0 FE E3 95 75 7D 85 77 BB 16 E0 DA \
+ 02 71 BB 77 C2 32 05 97 71 95 32 02 97 71 B4 06 \
+ E1 D2 01 71 B4 06 E3 67 AD 75 B4 32 03 97 71 C2 \
+ 32 04 97 75 BB 06 E2 D2 07 71 BB 77 C2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'" # poe48p56504.hex
+
+#Override Default Firebolt LED program for felix
+if $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0E 87 32 0F 87 57'"  # sdk56102.hex
+
+#Override Default Felix LED program for felix48
+if $?felix48 && $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'"  # felix48.hex
+
+if $?easyrider_any "local ledcode '\
+ E0 28 60 E3 67 59 67 95 06 E3 80 28 60 E3 67 95 \
+ 67 59 06 E3 80 D2 0C 74 01 28 60 E3 67 BD 75 26 \
+ 67 D2 67 59 77 2E 32 0E 87 32 08 87 67 C4 06 E3 \
+ 80 D2 0D 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 67 C4 67 C4 3A 38 32 00 97 75 65 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 71 12 AD FE E3 02 0A \
+ 50 12 AD FE E3 95 75 83 85 12 A0 FE E3 95 75 D2 \
+ 85 77 C4 12 A0 FE E3 95 75 8D 85 77 CB 16 E0 DA \
+ 02 71 CB 77 D2 32 05 97 71 A5 32 02 97 71 C4 06 \
+ E1 D2 01 71 C4 06 E3 67 BD 75 C4 32 03 97 71 D2 \
+ 32 04 97 75 CB 06 E2 D2 07 71 CB 77 D2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'"   # sdk56601.hex
+
+#Override Default Easyrider LED program for 56602
+if $?easyrider_1x1 "local ledcode '\
+ E0 60 E1 67 7C 67 7C 06 E1 80 D2 0C 74 01 02 0C \
+ 28 60 E1 67 75 75 1D 67 8A 67 39 77 25 32 0E 87 \
+ 32 08 87 67 7C 06 E1 D2 00 02 00 74 10 12 E0 85 \
+ 05 D2 05 71 37 52 00 3A 38 32 00 97 75 45 12 A0 \
+ FE E1 02 0A 50 32 01 97 75 51 12 AD FE E1 02 0A \
+ 50 12 AD FE E1 95 75 63 85 12 A0 FE E1 95 75 8A \
+ 85 77 7C 12 A0 FE E1 95 75 6D 85 77 83 16 E0 DA \
+ 02 71 83 77 8A 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'"   # sdk56602.hex
+
+#Override Default  LED program for 53300
+if $?mirage24 "local ledcode '\
+ E0 28 60 E3 67 6B 67 2F 06 E3 80 D2 18 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A2 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 9E 16 E0 DA 02 71 9E 77 A2 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A2 32 04 97 75 9E 06 E2 D2 07 71 \
+ 9E 77 A2 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E \
+ 87 57 32 0E 87 57'"  # sdk53300.hex
+
+#Override Default LED program for 56314
+if $?bcm56314p24ref "local ledcode '\
+ E0 28 60 E3 67 79 67 3D 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 79 67 A8 06 E3 80 D2 1C 74 0F 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 38 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B0 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AC 16 E0 DA 02 71 AC 77 B0 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B0 32 04 97 75 AC 06 E2 D2 07 71 AC 77 \
+ B0 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ 32 0E 87 57'"  # bcm956314p24ref.hex
+
+if $?bradley "local ledcode '\
+ E0 28 60 F2 67 1B 06 F2 80 D2 14 74 01 86 F3 12 \
+ F0 85 05 D2 05 71 19 52 00 3A 28 32 00 97 75 27 \
+ 12 A8 FE F2 02 0A 50 32 01 97 75 33 12 BC FE F2 \
+ 02 0A 50 12 BC FE F2 95 75 45 85 12 A8 FE F2 95 \
+ 75 91 85 77 57 12 A8 FE F2 95 75 4F 85 77 8A 16 \
+ F0 DA 02 71 8A 77 91 06 F2 12 94 F8 15 02 02 C1 \
+ 74 6E 02 04 C1 74 6E 02 08 C1 74 6E 77 74 C6 F3 \
+ 74 91 77 8A 06 F2 67 7C 75 83 77 91 12 80 F8 15 \
+ 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 \
+ 57 32 0F 87 32 0E 87 57'"     # sdk56800.hex
+
+if $?humv "local ledcode '\
+ E0 28 60 F2 67 21 06 F2 80 D2 08 74 0F F2 02 D2 \
+ 12 74 01 86 F3 12 F0 85 05 D2 05 71 1F 52 00 3A \
+ 20 32 00 97 75 2D 12 A8 FE F2 02 0A 50 32 01 97 \
+ 75 39 12 BA FE F2 02 0A 50 12 BA FE F2 95 75 4B \
+ 85 12 A8 FE F2 95 75 97 85 77 5D 12 A8 FE F2 95 \
+ 75 55 85 77 90 16 F0 DA 02 71 90 77 97 06 F2 12 \
+ 94 F8 15 02 02 C1 74 74 02 04 C1 74 74 02 08 C1 \
+ 74 74 77 7A C6 F3 74 97 77 90 06 F2 67 82 75 89 \
+ 77 97 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56700.hex
+
+if $?bradley_1g "local ledcode '\
+ E0 28 60 E3 67 2F 67 6B 06 E3 80 D2 14 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 50 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 B4 FE E3 02 0A 50 12 B4 FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A8 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 A1 16 E0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 E2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 '"  # sdk56800c.hex
+
+if $?goldwing "local ledcode '\
+ E0 28 60 F3 D2 10 75 0E 67 3B 67 94 77 12 67 94 \
+ 67 3B 06 F3 80 D2 14 74 01 86 F4 12 F2 85 05 D2 \
+ 0F 71 25 52 00 12 F1 85 05 D2 1F 71 2F 52 00 12 \
+ F0 85 05 D2 05 71 39 52 00 3A 50 32 00 97 75 47 \
+ 12 A8 FE F3 02 0A 50 32 01 97 75 53 12 BC FE F3 \
+ 02 0A 50 12 BC FE F3 95 75 65 85 12 A8 FE F3 95 \
+ 75 C0 85 77 77 12 A8 FE F3 95 75 6F 85 77 B9 16 \
+ F0 DA 02 71 B9 77 C0 06 F3 12 94 F8 15 02 02 C1 \
+ 74 8E 02 04 C1 74 8E 02 08 C1 74 8E 77 B2 C6 F4 \
+ 74 C0 77 B9 06 F3 67 AB 75 B2 32 04 75 B2 32 03 \
+ 97 71 C0 06 F2 D2 07 71 B9 77 C0 12 80 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 '"                          # sdk56580.hex
+
+if $?humv && $?lm "local ledcode '\
+ 02 04 28 D2 08 74 0A F2 02 28 32 07 67 29 75 11 \
+ D7 87 60 E4 67 30 06 E4 60 E4 67 4C 06 E4 32 08 \
+ D7 87 80 D2 12 74 02 3A 30 12 80 F8 15 1A 00 57 \
+ 06 E4 12 94 F8 15 02 10 C1 70 42 12 D2 FE E4 02 \
+ 0A 50 12 D2 FE E4 95 75 6D 85 77 68 06 E4 12 94 \
+ F8 15 02 20 C1 70 5E 12 C0 FE E4 02 0A 50 12 C0 \
+ FE E4 95 75 6D 85 77 68 32 0E D7 87 57 32 0F D7 \
+ 87 57 '"                                         # lm12p56802.hex
+
+
+if $?raptor "local ledcode '\
+ 02 06 28 60 FF 67 64 67 93 06 FF 80 D2 36 74 02 \
+ 02 04 28 60 FF 67 BB 75 1E 32 0E 87 77 21 32 0F \
+ 87 67 7D 06 FF 80 D2 06 74 12 02 01 28 60 FF 67 \
+ BB 75 38 32 0E 87 77 3B 32 0F 87 67 7D 06 FF 80 \
+ D2 03 74 2C 12 FE 85 05 D2 0F 71 4E 52 00 12 FD \
+ 85 05 D2 1F 71 58 52 00 12 FC 85 05 D2 05 71 62 \
+ 52 00 3A C8 32 01 97 75 76 32 00 97 75 C9 16 FC \
+ DA 02 71 C9 77 D0 32 00 97 75 C2 77 D0 32 00 97 \
+ 75 86 32 0E 87 57 32 01 97 75 8F 32 0E 87 57 32 \
+ 0F 87 57 32 05 97 71 A3 32 02 97 71 C2 06 FD D2 \
+ 01 71 C2 06 FF 67 BB 75 C2 32 03 97 71 D0 32 04 \
+ 97 75 C9 06 FE D2 07 71 C9 77 D0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" # sdk56018.hex
+
+if $?raptor && $?rap24_ref "local ledcode '\
+ 02 06 60 E1 67 48 67 31 06 E1 80 D2 1E 71 02 02 \
+ 05 60 E1 67 48 67 31 06 E1 90 D2 03 74 11 02 02 \
+ 60 E1 67 48 67 31 06 E1 90 D2 00 74 20 86 E0 3A \
+ 38 06 E1 67 50 75 57 28 32 00 32 01 B7 97 75 57 \
+ 16 E0 CA 05 74 5B 77 57 06 E1 67 50 75 57 77 5B \
+ 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00'" # sdk56214.hex
+
+if $?raven_eb_48p "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 71 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024p48ref.hex
+
+if $?BCM956024R50T "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 75 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024r50t.hex
+
+if $?scorpion || $?conqueror "local ledcode '\
+ 02 18 28 60 E1 67 12 06 E1 90 D2 00 74 02 86 E0 \
+ 3A 18 67 2D 75 34 28 32 00 32 01 B7 97 75 38 16 \
+ E0 CA 05 74 38 77 34 67 2D 75 34 77 38 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 \
+ 00 00 00'" #sdk56820.hex
+
+if $?scorpion && $?BCM956820R24XG "local ledcode '\
+ 02 01 28 67 D0 02 02 28 67 D6 67 D0 02 01 28 67 \
+ D6 02 04 28 67 D0 02 03 28 67 D6 67 D0 02 04 28 \
+ 67 D6 02 05 28 67 D0 02 06 28 67 D6 67 D0 02 05 \
+ 28 67 D6 02 07 28 67 D0 02 08 28 67 D6 67 D0 02 \
+ 07 28 67 D6 02 09 28 67 D0 02 0A 28 67 D6 67 D0 \
+ 02 09 28 67 D6 02 0C 28 67 D0 02 0B 28 67 D6 67 \
+ D0 02 0C 28 67 D6 02 0D 28 67 D0 02 0E 28 67 D6 \
+ 67 D0 02 0D 28 67 D6 02 0F 28 67 D0 02 10 28 67 \
+ D6 67 D0 02 0F 28 67 D6 02 11 28 67 D0 02 12 28 \
+ 67 D6 67 D0 02 11 28 67 D6 02 14 28 67 D0 02 13 \
+ 28 67 D6 67 D0 02 14 28 67 D6 02 15 28 67 D0 02 \
+ 16 28 67 D6 67 D0 02 15 28 67 D6 02 17 28 67 D0 \
+ 02 18 28 67 D6 67 D0 02 17 28 67 D6 86 E0 3A 30 \
+ 67 F1 75 F8 77 FC 67 F1 75 F8 28 32 00 32 01 B7 \
+ 97 75 F8 16 E0 CA 05 74 FC 77 F8 67 F1 75 F8 77 \
+ FC 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ '" #bcm956820r24xg.hex
+
+if $?valkyrie "local ledcode '\
+ 02 02 67 A9 67 94 02 03 67 A9 67 94 02 05 67 A9 \
+ 67 94 02 04 67 A9 67 94 02 06 67 A9 67 94 02 07 \
+ 67 A9 67 94 02 12 67 A9 67 94 02 13 67 A9 67 94 \
+ 02 0E 67 A9 67 94 02 0F 67 A9 67 94 02 11 67 A9 \
+ 67 94 02 10 67 A9 67 94 02 1A 67 A9 67 94 02 20 \
+ 67 A9 67 94 02 21 67 A9 67 94 02 22 67 A9 67 94 \
+ 02 23 67 A9 67 94 02 24 67 A9 67 94 02 2F 67 A9 \
+ 67 94 02 2E 67 A9 67 94 02 1B 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56680.hex
+
+if $?valkyrie2 "local ledcode '\
+ 02 1E 67 A9 67 94 02 1F 67 A9 67 94 02 21 67 A9 \
+ 67 94 02 20 67 A9 67 94 02 22 67 A9 67 94 02 23 \
+ 67 A9 67 94 02 24 67 A9 67 94 02 25 67 A9 67 94 \
+ 02 26 67 A9 67 94 02 27 67 A9 67 94 02 29 67 A9 \
+ 67 94 02 28 67 A9 67 94 02 2A 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 02 2E 67 A9 67 94 02 2F 67 A9 67 94 02 31 67 A9 \
+ 67 94 02 30 67 A9 67 94 02 32 67 A9 67 94 02 33 \
+ 67 A9 67 94 02 34 67 A9 67 94 02 35 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56685.hex
+
+if $?hawkeye_p24 "local ledcode '\
+ 02 01 28 60 E3 67 43 67 1C 06 E3 80 D2 19 74 02 \
+ 12 E0 85 05 D2 03 71 1A 52 00 3A 60 32 00 32 01 \
+ B7 97 75 2B 12 E4 FE E3 02 01 50 12 E4 FE E3 95 \
+ 75 3B 85 06 E3 67 55 75 6A 77 5C 16 E0 DA 01 71 \
+ 6A 77 5C 06 E3 67 55 75 6A 32 03 97 71 5C 32 04 \
+ 97 75 6A 77 63 12 A0 F8 15 1A 00 57 32 0E 87 32 \
+ 0F 87 57 32 0F 87 32 0E 87 57 32 0F 87 32 0F 87 \
+ 57'"  #bcm953314p24ref.hex
+
+if $?hawkeye_k24 "local ledcode '\
+ 02 01 28 60 E1 67 3D 67 1C 06 E1 80 D2 19 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 30 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 50 16 E0 DA 02 71 4C 77 50 06 E1 67 \
+ 45 75 50 77 4C 12 A0 F8 15 1A 00 57 32 0E 87 57 \
+ 32 0F 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #bcm953314k24.hex
+
+if !"expr $pcidev + 0 == 0xb624" "local ledcode '\
+ 02 1C 28 67 18 02 1D 28 67 18 02 1E 28 67 18 02 \
+ 1F 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56624.hex
+
+if !"expr $pcidev + 0 == 0xb626" "local ledcode '\
+ 02 1A 28 67 22 02 1B 28 67 22 02 1C 28 67 22 02 \
+ 1D 28 67 22 02 1E 28 67 22 02 1F 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56626.hex
+
+if !"expr $pcidev + 0 == 0xb628" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56628.hex
+
+if !"expr $pcidev + 0 == 0xb629" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56629.hex
+
+if !"expr $pcidev + 0 == 0xb634" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb630" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb636" "local ledcode '\
+ 02 2A 28 67 22 02 32 28 67 22 02 1A 28 67 22 02 \
+ 1B 28 67 22 02 1C 28 67 22 02 1D 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56636.hex
+
+if !"expr $pcidev + 0 == 0xb638" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56638.hex
+
+if !"expr $pcidev + 0 == 0xb639" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56639.hex
+
+if !"expr $pcidev + 0 == 0xb334" "local ledcode '\
+ 02 02 28 60 E1 67 3D 67 1C 06 E1 80 D2 1E 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 38 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 4C 16 E0 DA 02 71 50 77 4C 06 E1 67 \
+ 45 75 4C 77 50 12 A0 F8 15 1A 00 57 32 0F 87 57 \
+ 32 0E 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #sdk56334.hex
+
+if $?apollo "local ledcode '\
+ 02 1E 28 60 E0 67 58 67 73 06 E0 80 28 60 E0 67 \
+ 73 67 58 06 E0 80 D2 36 74 02 02 1A 28 60 E0 67 \
+ 9B 75 29 67 B0 67 58 77 31 32 0E 87 32 08 87 67 \
+ A2 06 E0 80 D2 1E 74 1C 12 E2 85 05 D2 0F 71 42 \
+ 52 00 12 E1 85 05 D2 1F 71 4C 52 00 12 E3 85 05 \
+ D2 05 71 56 52 00 3A 70 32 00 97 75 64 32 01 97 \
+ 71 6B 77 B0 32 01 97 71 A9 77 A2 16 E3 DA 02 71 \
+ A9 77 B0 32 05 97 75 83 32 02 97 71 A2 06 E1 D2 \
+ 01 71 A2 06 E0 67 9B 75 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 E2 D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" #sdk56524.hex
+
+if $?generic8led "local ledcode '\
+ 06 E1 D2 40 71 11 E0 60 E1 16 E3 DA 01 71 15 60 \
+ E3 67 5D 75 2B 12 01 61 E3 67 71 28 67 32 86 E0 \
+ 16 E2 81 61 E2 DA 1E 75 2B 3A 08 E9 61 E2 86 E1 \
+ 77 00 67 5D 75 38 77 3C 67 64 77 64 67 41 67 4F \
+ 57 28 32 01 97 75 64 16 E0 CA 05 74 68 77 64 28 \
+ 32 00 97 75 64 16 E0 CA 05 74 68 77 64 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 09 75 64 77 \
+ 68 12 05 67 6C 12 04 67 6C 12 03 67 6C 12 02 67 \
+ 6C 12 01 67 6C 12 00 67 6C 57 00 00 00 00 00 00'" #generic8led.hex
+
+# Download LED code into LED processor and enable (if applicable).
+
+if $?feature_led_proc && $?ledcode && !$?simulator \
+	"led prog $ledcode; \
+	 led auto on; led start"
+
+# If loading multiple rc.soc, upon loading the last unit, restart
+# all LED processors so any common blinking is in sync.
+
+if !"expr $?feature_led_proc && !$?simulator && $unit == $units - 1" \
+	"*:led stop; *:led start"
+
+# Run counter DMA task 4 times per second to achieve better
+# ctr_xaui_activity.
+if $?bradley_any \
+        "ctr interval=250000"
+
+# Initialize Hercules UC modid 0 entry to point to the CPU
+if $?herc_any \
+	"w uc 0 1 1"
+
+# Additional configuration for 48-port in Stacking mode.
+# On the 48-port platform, rc.soc is run twice; once on unit 0 and
+# then once on unit 1.  The turbo port on unit N is geN.
+# All turbo port traffic must be tagged; see vlan add below.
+# See $SDK/doc/48-port.txt for more information including how
+# to configure IPG values for line rate operation.
+
+if $?p48 && $?unit0 \
+	"local turbo_port 0; local my_modid 1;"
+
+if $?p48 && $?unit1 \
+	"local turbo_port 1; local my_modid 2;"
+
+if $?p48 \
+	"m config st_is_mirr=0 st_module=1 st_mcnt=1 st_simplex=0 st_link=0; \
+	 m config.g$turbo_port st_link=1; \
+	 m gmacc2.ge$turbo_port ipgt=8 mclkfq=1; \
+	 m fe_maxf maxfr=1560; \
+	 m maxfr maxfr=1568; \
+	 m config2 my_modid=$my_modid; \
+	 port ge$turbo_port speed=2500; \
+	 vlan add 1 pbm=ge$turbo_port ubm=none"
+
+if !$?no_bcm && $?drac_any \
+   "m modport_7_0 port_for_mod1=0xc"
+if !$?no_bcm && $?lynx_any \
+   "m modport_7_0 port_for_mod1=0x1"
+if !$?no_bcm && $?tucana \
+   "stkmode modid=0;"
+if !$?no_bcm && $?tucana && !$?magnum && !$?tucana_nohg \
+   "m modport_7_0 port_for_mod2=0x38; \
+    m imodport_7_0 port_for_mod0=0 port_for_mod1=0 port_for_mod2=0x38; \
+    stkmode modid=0"
+if !$?no_bcm && $?xgs_switch && !$?rcpu_only\
+   "stkmode modid=0; \
+    s CMIC_COS_CTRL_RX CH0_COS_BMP=0,CH1_COS_BMP=0xff, \
+        CH2_COS_BMP=0,CH3_COS_BMP=0"
+
+# Back-to-back Draco setup.
+
+# Draco chips must run at 127MHz. Some older versions
+# are not set to this frequency.
+
+if $?draco_stk && $?unit0 \
+    "i2c probe quiet; bb clock Ref125 127"
+
+# Applies to SDK Baseboard with either internal or external Higigs,
+# as well as the Galahad reference design.
+
+if $?draco_b2b && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if !$?simulator && $?draco_b2b && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_b2b && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Merlin, White Knight, Black Knight setup.
+#	Draco unit 1 is on Herc port 8
+#	Draco unit 2 is on Herc port 1
+
+if $?draco_herc4 && $?unit0 \
+    "w uc.hpic7 0 1 0x0; \
+     w uc.hpic7 1 1 0x2; \
+     w uc.hpic0 0 1 0x100; \
+     w uc.hpic0 1 1 0x0"
+
+if !$?simulator && $?draco_herc4 && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_herc4 && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if $?draco_herc4 && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Lancelot setup
+# (enabled by adding the property "lancelot=1")
+# Notes:
+#	Draco unit 1 is on Herc port 7
+#	Draco unit 2 is on Herc port 8
+#	Draco unit 3 is on Herc port 1
+#	Draco unit 4 is on Herc port 2
+
+if $?lancelot && $?unit0 \
+    "w uc.hpic6 0 1 0x0; \
+     w uc.hpic6 1 1 0x100; \
+     w uc.hpic6 2 1 0x2; \
+     w uc.hpic6 3 1 0x4; \
+     w uc.hpic7 0 1 0x80; \
+     w uc.hpic7 1 1 0x0; \
+     w uc.hpic7 2 1 0x2; \
+     w uc.hpic7 3 1 0x4; \
+     w uc.hpic0 0 1 0x80; \
+     w uc.hpic0 1 1 0x100; \
+     w uc.hpic0 2 1 0x0; \
+     w uc.hpic0 3 1 0x4; \
+     w uc.hpic1 0 1 0x80; \
+     w uc.hpic1 1 1 0x100; \
+     w uc.hpic1 2 1 0x2; \
+     w uc.hpic1 3 1 0x0"
+
+if !$?simulator && $?lancelot && $?unit0 \
+     "i2c probe quiet; bb clock Draco_Core 127"
+
+if $?lancelot && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit3 \
+    "stkmode modid=2; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12"
+
+if $?lancelot && $?unit4 \
+    "stkmode modid=3; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0"
+
+# Lynx SDK (TwoLynx) setup
+# (enabled by adding the property "twolynx=1")
+
+if $?twolynx && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     "
+
+if $?twolynx && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     "
+# HercuLynx setup
+# (enabled by adding the property "herculynx=1")
+# Notes:
+#	Lynx unit 1 is on Herc port 1
+#	Lynx unit 2 is on Herc port 2
+#	Lynx unit 3 is on Herc port 3
+#	Lynx unit 4 is on Herc port 4
+#	Lynx unit 5 is on Herc port 5
+#	Lynx unit 6 is on Herc port 6
+#	Lynx unit 7 is on Herc port 7
+#	Lynx unit 8 is on Herc port 8
+
+if $?herculynx && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x008; \
+     w uc.hpic0 3 1 0x010; \
+     w uc.hpic0 4 1 0x020; \
+     w uc.hpic0 5 1 0x040; \
+     w uc.hpic0 6 1 0x080; \
+     w uc.hpic0 7 1 0x100; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x008; \
+     w uc.hpic1 3 1 0x010; \
+     w uc.hpic1 4 1 0x020; \
+     w uc.hpic1 5 1 0x040; \
+     w uc.hpic1 6 1 0x080; \
+     w uc.hpic1 7 1 0x100; \
+                         ; \
+     w uc.hpic2 0 1 0x002; \
+     w uc.hpic2 1 1 0x004; \
+     w uc.hpic2 2 1 0x008; \
+     w uc.hpic2 3 1 0x010; \
+     w uc.hpic2 4 1 0x020; \
+     w uc.hpic2 5 1 0x040; \
+     w uc.hpic2 6 1 0x080; \
+     w uc.hpic2 7 1 0x100; \
+                         ; \
+     w uc.hpic3 0 1 0x002; \
+     w uc.hpic3 1 1 0x004; \
+     w uc.hpic3 2 1 0x008; \
+     w uc.hpic3 3 1 0x010; \
+     w uc.hpic3 4 1 0x020; \
+     w uc.hpic3 5 1 0x040; \
+     w uc.hpic3 6 1 0x080; \
+     w uc.hpic3 7 1 0x100; \
+                         ; \
+     w uc.hpic4 0 1 0x002; \
+     w uc.hpic4 1 1 0x004; \
+     w uc.hpic4 2 1 0x008; \
+     w uc.hpic4 3 1 0x010; \
+     w uc.hpic4 4 1 0x020; \
+     w uc.hpic4 5 1 0x040; \
+     w uc.hpic4 6 1 0x080; \
+     w uc.hpic4 7 1 0x100; \
+                         ; \
+     w uc.hpic5 0 1 0x002; \
+     w uc.hpic5 1 1 0x004; \
+     w uc.hpic5 2 1 0x008; \
+     w uc.hpic5 3 1 0x010; \
+     w uc.hpic5 4 1 0x020; \
+     w uc.hpic5 5 1 0x040; \
+     w uc.hpic5 6 1 0x080; \
+     w uc.hpic5 7 1 0x100; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x008; \
+     w uc.hpic6 3 1 0x010; \
+     w uc.hpic6 4 1 0x020; \
+     w uc.hpic6 5 1 0x040; \
+     w uc.hpic6 6 1 0x080; \
+     w uc.hpic6 7 1 0x100; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x008; \
+     w uc.hpic7 3 1 0x010; \
+     w uc.hpic7 4 1 0x020; \
+     w uc.hpic7 5 1 0x040; \
+     w uc.hpic7 6 1 0x080; \
+     w uc.hpic7 7 1 0x100; \
+                         ; \
+     "
+
+if $?herculynx && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?herculynx && $?unit1 \
+    "stkmode modid=0"
+
+if $?herculynx && $?unit2 \
+    "stkmode modid=1"
+
+if $?herculynx && $?unit3 \
+    "stkmode modid=2"
+
+if $?herculynx && $?unit4 \
+    "stkmode modid=3"
+
+if $?herculynx && $?unit5 \
+    "stkmode modid=4"
+
+if $?herculynx && $?unit6 \
+    "stkmode modid=5"
+
+if $?herculynx && $?unit7 \
+    "stkmode modid=6"
+
+if $?herculynx && $?unit8 \
+    "stkmode modid=7"
+
+# LynxaLot setup
+# (enabled by adding the property "lynxalot=1")
+# Notes:
+#	Lynx unit 0 is on Herc port 3 (hg2/hpic2) (mod 0)
+#	Lynx unit 1 is on Herc port 4 (hg3/hpic3) (mod 1)
+#	Higig conn 0 is on Herc port 5 (hg4/hpic4)
+#	Higig conn 1 is on Herc port 6 (hg5/hpic5)
+#	Draco unit 3 is on Herc port 7 (hg6/hpic6) (mod 2)
+#	Draco unit 4 is on Herc port 8 (hg7/hpic7) (mod 3)
+#	Draco unit 5 is on Herc port 1 (hg0/hpic0) (mod 4)
+#	Draco unit 6 is on Herc port 2 (hg1/hpic1) (mod 5)
+
+if $?lynxalot && $?unit2 \
+    " \
+     w uc.hpic0 0 1 0x008; \
+     w uc.hpic0 1 1 0x010; \
+     w uc.hpic0 2 1 0x080; \
+     w uc.hpic0 3 1 0x100; \
+     w uc.hpic0 4 1 0x002; \
+     w uc.hpic0 5 1 0x004; \
+                         ; \
+     w uc.hpic1 0 1 0x008; \
+     w uc.hpic1 1 1 0x010; \
+     w uc.hpic1 2 1 0x080; \
+     w uc.hpic1 3 1 0x100; \
+     w uc.hpic1 4 1 0x002; \
+     w uc.hpic1 5 1 0x004; \
+                         ; \
+     w uc.hpic2 0 1 0x008; \
+     w uc.hpic2 1 1 0x010; \
+     w uc.hpic2 2 1 0x080; \
+     w uc.hpic2 3 1 0x100; \
+     w uc.hpic2 4 1 0x002; \
+     w uc.hpic2 5 1 0x004; \
+                         ; \
+     w uc.hpic3 0 1 0x008; \
+     w uc.hpic3 1 1 0x010; \
+     w uc.hpic3 2 1 0x080; \
+     w uc.hpic3 3 1 0x100; \
+     w uc.hpic3 4 1 0x002; \
+     w uc.hpic3 5 1 0x004; \
+                         ; \
+     w uc.hpic6 0 1 0x008; \
+     w uc.hpic6 1 1 0x010; \
+     w uc.hpic6 2 1 0x080; \
+     w uc.hpic6 3 1 0x100; \
+     w uc.hpic6 4 1 0x002; \
+     w uc.hpic6 5 1 0x004; \
+                         ; \
+     w uc.hpic7 0 1 0x008; \
+     w uc.hpic7 1 1 0x010; \
+     w uc.hpic7 2 1 0x080; \
+     w uc.hpic7 3 1 0x100; \
+     w uc.hpic7 4 1 0x002; \
+     w uc.hpic7 5 1 0x004; \
+                         ; \
+     "
+
+if $?lynxalot && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?lynxalot && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?lynxalot && $?unit0 \
+    "stkmode modid=0"
+     
+if $?lynxalot && $?unit1 \
+    "stkmode modid=1"
+
+if $?lynxalot && $?unit3 \
+    "stkmode modid=2"
+
+if $?lynxalot && $?unit4 \
+    "stkmode modid=3"
+
+if $?lynxalot && $?unit5 \
+    "stkmode modid=4"
+
+if $?lynxalot && $?unit6 \
+    "stkmode modid=5"
+
+# guenevere setup
+# (enabled by adding the property "guenevere=1")
+# Notes:
+#       hgX mapping based on pbmp_valid.0=0x1b7
+#	Draco unit 1 is on Herc port 1 (hg0/hpic0) (mod 0)
+#	Draco unit 2 is on Herc port 2 (hg1/hpic1) (mod 1)
+#	Lynx unit 3 is on Herc port 8 (hg5/hpic7) (mod 2)
+#	Lynx unit 4 is on Herc port 7 (hg4/hpic6) (mod 3)
+#	Higig conn 0 is on Herc port 4 (hg2/hpic3)
+#	Higig conn 1 is on Herc port 5 (hg3/hpic4)
+#       Herc port 3 - Unused (hpic2)
+#       Herc port 6 - Unused (hpic5)
+if $?guenevere && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x100; \
+     w uc.hpic0 3 1 0x080; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x100; \
+     w uc.hpic1 3 1 0x080; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x100; \
+     w uc.hpic7 3 1 0x080; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x100; \
+     w uc.hpic6 3 1 0x080; \
+                         ; \
+     "
+
+if $?guenevere && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?guenevere && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?guenevere && $?unit1 \
+    "stkmode modid=0"
+     
+if $?guenevere && $?unit2 \
+    "stkmode modid=1"
+
+if $?guenevere && $?unit3 \
+    "stkmode modid=2"
+
+if $?guenevere && $?unit4 \
+    "stkmode modid=3"
+     
+# felix48 setup
+# (enabled by adding the property "felix48=1")
+# Notes:
+#       BCM56102 unit-0 higig port (port 26) is connected
+#       to BCM56102 Unit-1 higig port (port 26)
+#
+
+if $?felix48 && $?unit0 \
+    "stkmode modid=0 ; \
+     m IEGR_PORT MY_MODID=0; \
+     m XPORT_CONFIG MY_MODID=0; \
+     w MODPORT_MAP 1 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+
+if $?felix48 && $?unit1 \
+    "stkmode modid=1 ; \
+     m IEGR_PORT MY_MODID=1; \
+     m XPORT_CONFIG MY_MODID=1; \
+     w MODPORT_MAP 0 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+# fbpoe setup
+# (enabled by adding the property "fbpoe=1")
+# Notes:
+#       BCM56504 unit-0 higig port (port 27,28) is connected
+#       to BCM56504 Unit-1 higig port (port 27,28)
+#
+
+if $?unit0 && $?firebolt_any && $?fbpoe     \
+  "stkmode modid=0;           \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+if $?unit1 && $?firebolt_any && $?fbpoe \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+# Dual Raptor/Raven boards
+if $?raven_eb_48p || $?rap24_ref \
+    "local rcpu_system 1"
+if $?unit0 && $?rcpu_system \
+   "stkmode modid=0"
+if $?unit1 && $?rcpu_system \
+   "stkmode modid=1"
+
+# LM fb48 platform setup
+# (enabled by adding the property "lm48p=1")
+#
+if $?unit0 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=0"
+
+if $?unit1 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=1"
+
+# Set Firebolt POE power level 170(total) - 110(switch) = 60
+if $?fbpoe \
+        "local poepower 60"
+
+# Set Draco15 POE power level 170(total) - 80(switch) = 90
+if $?drac15\
+        "local poepower 90"
+
+# if enable_poe is set, then enable the POE processor for
+# either Firebolt or Draco15 platform
+if $?unit0 && $?enable_poe && $?fbpoe || $?drac15 \
+        "$echo rc: Enabling POE ...; \
+         poesel reset; \
+         i2c probe quiet; \
+         xpoe verbose off; \
+         xpoe power $poepower; \
+         xpoe verbose on; \
+         poesel enable"
+
+# mark this unit so that subsequent rc runs are quiet
+setenv rc$unit 1
+
+if $?macsec '\
+    macsec sync; \
+    $echo "rc: MACSEC CLI Enabled"'
+
+# cache a copy of rc.soc in memory
+rccache addq rc.soc
+
+# setup chassis if requested
+if !"expr $?autochassis2 && $unit == $units - 1" \
+    "setenv chassis2_no_rc 1; \
+     rcload c2switch.soc; \
+     setenv chassis2_no_rc; \
+    "
+
+# start stacking if requested
+if !"expr $?autostack && $unit == $units - 1" \
+	"rcload stk.soc"
+
+if !"expr $?aedev + 0" && !"expr $unit == $units - 1" \
+       "aedev init"
+
+# hurricane 48p FE platform LED setup for 56146_A0 and 56147_A0 board
+# (enabled by adding the property "fe_hu_48p=1")
+#
+if $?fe_hu_48p && $?BCM56146 || $?BCM56147 \
+    "phy fe0 0x1f 0x008b; \
+     phy fe0 0x1a 0x3f09;\
+     phy fe8 0x1f 0x008b; \
+     phy fe8 0x1a 0x3f09; \
+     phy fe16 0x1f 0x008b; \
+     phy fe16 0x1a 0x3f09"
+
+rcload bal.soc
diff --git a/bal_release/3rdparty/bcm-sdk/rc/kt2/readme.txt b/bal_release/3rdparty/bcm-sdk/rc/kt2/readme.txt
new file mode 100644
index 0000000..b027d55
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/kt2/readme.txt
@@ -0,0 +1,18 @@
+This directory contains bcm files that are needed in the KT2 svk file system to bring up 
+the BCM Diag Shell.
+User can also copy the bcm.user linux-kernel-bde.ko and linux-user-bde.ko
+from a private bcm_sdk build to the same KT2 svk file system.
+!!!
+   Do not forget to change the IP in bal.soc to point it to the BAL_CORE
+!!!
+
+The currently supported bcm_sdk version is 6.4.4
+.
+|-- bal.soc
+|-- bcm.user
+|-- linux-kernel-bde.ko
+|-- linux-user-bde.ko
+|-- rc.soc
+ 
+  
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/bcm88470_board.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/bcm88470_board.soc
new file mode 100755
index 0000000..b944270
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/bcm88470_board.soc
@@ -0,0 +1,211 @@
+# $Id:
+# $Copyright: (c) 1998-2001 Broadcom Corp.
+# All Rights Reserved.$
+#
+
+# Dram dq swaps for BCM88470
+
+#Dram HW properties
+
+#RX polarity
+config add phy_rx_polarity_flip.BCM88470=0
+
+
+#TX polarity
+config add phy_tx_polarity_flip.BCM88470=0
+
+#rx lane swap
+config add phy_rx_lane_map.BCM88470=0x3210
+config add phy_rx_lane_map_quad0.BCM88470=0x3210
+config add phy_rx_lane_map_quad1.BCM88470=0x3210
+config add phy_rx_lane_map_quad2.BCM88470=0x3210
+config add phy_rx_lane_map_quad3.BCM88470=0x3210
+config add phy_rx_lane_map_quad4.BCM88470=0x3210
+config add phy_rx_lane_map_quad5.BCM88470=0x3210
+config add phy_rx_lane_map_quad6.BCM88470=0x3210
+config add phy_rx_lane_map_quad7.BCM88470=0x3210
+config add phy_rx_lane_map_quad8.BCM88470=0x3210
+config add phy_rx_lane_map_quad9.BCM88470=0x3210
+config add phy_rx_lane_map_quad10.BCM88470=0x3120
+config add phy_rx_lane_map_quad11.BCM88470=0x3210
+
+
+#tx lane swap
+config add phy_tx_lane_map.BCM88470=0x3210
+config add phy_tx_lane_map_quad0.BCM88470=0x3210
+config add phy_tx_lane_map_quad1.BCM88470=0x3210
+config add phy_tx_lane_map_quad2.BCM88470=0x3210
+config add phy_tx_lane_map_quad3.BCM88470=0x3210
+config add phy_tx_lane_map_quad4.BCM88470=0x3210
+config add phy_tx_lane_map_quad5.BCM88470=0x3210
+config add phy_tx_lane_map_quad6.BCM88470=0x3210
+config add phy_tx_lane_map_quad7.BCM88470=0x3210
+config add phy_tx_lane_map_quad8.BCM88470=0x3210
+config add phy_tx_lane_map_quad9.BCM88470=0x3210
+config add phy_tx_lane_map_quad10.BCM88470=0x3120
+config add phy_tx_lane_map_quad11.BCM88470=0x3210
+
+# Dram dq swaps for BCM88470
+config add ext_ram_dq_swap_dram0_byte0_bit0.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte0_bit1.BCM88470=0
+config add ext_ram_dq_swap_dram0_byte0_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte0_bit3.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte0_bit4.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte0_bit5.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte0_bit6.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte0_bit7.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte1_bit0.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte1_bit1.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte1_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte1_bit3.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte1_bit4.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte1_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram0_byte1_bit6.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte1_bit7.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte2_bit0.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte2_bit1.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte2_bit2.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte2_bit3.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte2_bit4.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte2_bit5.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte2_bit6.BCM88470=0
+config add ext_ram_dq_swap_dram0_byte2_bit7.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte3_bit0.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte3_bit1.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte3_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte3_bit3.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte3_bit4.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte3_bit5.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte3_bit6.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte3_bit7.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte0_bit0.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte0_bit1.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte0_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte0_bit3.BCM88470=3
+config add ext_ram_dq_swap_dram1_byte0_bit4.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte0_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte0_bit6.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte0_bit7.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte1_bit0.BCM88470=3
+config add ext_ram_dq_swap_dram1_byte1_bit1.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte1_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte1_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte1_bit4.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte1_bit5.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte1_bit6.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte1_bit7.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte2_bit0.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte2_bit1.BCM88470=3
+config add ext_ram_dq_swap_dram1_byte2_bit2.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte2_bit3.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte2_bit4.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte2_bit5.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte2_bit6.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte2_bit7.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte3_bit0.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte3_bit1.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte3_bit2.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte3_bit3.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte3_bit4.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte3_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte3_bit6.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte3_bit7.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte0_bit0.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte0_bit1.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte0_bit2.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte0_bit3.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte0_bit4.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte0_bit5.BCM88470=1
+config add ext_ram_dq_swap_dram2_byte0_bit6.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte0_bit7.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte1_bit0.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte1_bit1.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte1_bit2.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte1_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte1_bit4.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte1_bit5.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte1_bit6.BCM88470=1
+config add ext_ram_dq_swap_dram2_byte1_bit7.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte2_bit0.BCM88470=1
+config add ext_ram_dq_swap_dram2_byte2_bit1.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte2_bit2.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte2_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte2_bit4.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte2_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte2_bit6.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte2_bit7.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte3_bit0.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte3_bit1.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte3_bit2.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte3_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte3_bit4.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte3_bit5.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte3_bit6.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte3_bit7.BCM88470=1
+
+# Dram bank addr swaps for BCM88470
+config add ext_ram_addr_bank_swap_dram0_bit7.BCM88470=4
+config add ext_ram_addr_bank_swap_dram0_bit11.BCM88470=5
+config add ext_ram_addr_bank_swap_dram0_bit13.BCM88470=15
+config add ext_ram_addr_bank_swap_dram0_bit14.BCM88470=17
+config add ext_ram_addr_bank_swap_dram0_bit5.BCM88470=6
+config add ext_ram_addr_bank_swap_dram0_bit0.BCM88470=7
+config add ext_ram_addr_bank_swap_dram0_bit8.BCM88470=8
+config add ext_ram_addr_bank_swap_dram0_bit1.BCM88470=9
+config add ext_ram_addr_bank_swap_dram0_bit4.BCM88470=10
+config add ext_ram_addr_bank_swap_dram0_bit16.BCM88470=11
+config add ext_ram_addr_bank_swap_dram0_bit15.BCM88470=12
+config add ext_ram_addr_bank_swap_dram0_bit12.BCM88470=13
+config add ext_ram_addr_bank_swap_dram0_bit6.BCM88470=0
+config add ext_ram_addr_bank_swap_dram0_bit2.BCM88470=1
+config add ext_ram_addr_bank_swap_dram0_bit9.BCM88470=2
+config add ext_ram_addr_bank_swap_dram0_bit10.BCM88470=14
+config add ext_ram_addr_bank_swap_dram0_bit17.BCM88470=16
+config add ext_ram_addr_bank_swap_dram1_bit10.BCM88470=4
+config add ext_ram_addr_bank_swap_dram1_bit14.BCM88470=5
+config add ext_ram_addr_bank_swap_dram1_bit7.BCM88470=15
+config add ext_ram_addr_bank_swap_dram1_bit12.BCM88470=17
+config add ext_ram_addr_bank_swap_dram1_bit4.BCM88470=6
+config add ext_ram_addr_bank_swap_dram1_bit6.BCM88470=7
+config add ext_ram_addr_bank_swap_dram1_bit9.BCM88470=8
+config add ext_ram_addr_bank_swap_dram1_bit1.BCM88470=9
+config add ext_ram_addr_bank_swap_dram1_bit5.BCM88470=10
+config add ext_ram_addr_bank_swap_dram1_bit11.BCM88470=11
+config add ext_ram_addr_bank_swap_dram1_bit8.BCM88470=12
+config add ext_ram_addr_bank_swap_dram1_bit13.BCM88470=13
+config add ext_ram_addr_bank_swap_dram1_bit0.BCM88470=0
+config add ext_ram_addr_bank_swap_dram1_bit15.BCM88470=1
+config add ext_ram_addr_bank_swap_dram1_bit2.BCM88470=2
+config add ext_ram_addr_bank_swap_dram1_bit17.BCM88470=14
+config add ext_ram_addr_bank_swap_dram1_bit16.BCM88470=16
+config add ext_ram_addr_bank_swap_dram2_bit15.BCM88470=4
+config add ext_ram_addr_bank_swap_dram2_bit5.BCM88470=5
+config add ext_ram_addr_bank_swap_dram2_bit11.BCM88470=15
+config add ext_ram_addr_bank_swap_dram2_bit7.BCM88470=17
+config add ext_ram_addr_bank_swap_dram2_bit17.BCM88470=6
+config add ext_ram_addr_bank_swap_dram2_bit0.BCM88470=7
+config add ext_ram_addr_bank_swap_dram2_bit16.BCM88470=8
+config add ext_ram_addr_bank_swap_dram2_bit2.BCM88470=9
+config add ext_ram_addr_bank_swap_dram2_bit13.BCM88470=10
+config add ext_ram_addr_bank_swap_dram2_bit9.BCM88470=11
+config add ext_ram_addr_bank_swap_dram2_bit12.BCM88470=12
+config add ext_ram_addr_bank_swap_dram2_bit6.BCM88470=13
+config add ext_ram_addr_bank_swap_dram2_bit14.BCM88470=0
+config add ext_ram_addr_bank_swap_dram2_bit8.BCM88470=1
+config add ext_ram_addr_bank_swap_dram2_bit1.BCM88470=2
+config add ext_ram_addr_bank_swap_dram2_bit4.BCM88470=14
+config add ext_ram_addr_bank_swap_dram2_bit10.BCM88470=16
+
+##Dram HW properties
+config add ext_ram_present.BCM88470=3
+config add dram_type_DDR4_MICRON_Y4016AABG_JD_F_4GBIT=1
+config add ext_ram_freq.BCM88470=1600
+config add ext_ram_abi.BCM88470=0
+config add ext_ram_write_dbi.BCM88470=0
+config add ext_ram_read_dbi.BCM88470=0
+config add ext_ram_write_crc.BCM88470=0
+config add ext_ram_read_crc.BCM88470=0
+config add ext_ram_cmd_par_latency.BCM88470=6
+config add ext_ram_type.BCM88470=DDR4
+config add ext_ram_total_size.BCM88470=3000
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/combo28_dram.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/combo28_dram.soc
new file mode 100755
index 0000000..d47c1f5
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/combo28_dram.soc
@@ -0,0 +1,560 @@
+#
+# $Id: combo28_dram.soc,v 1.0 2014/04/28 15:50:00 nhefetz Exp $
+#
+# $Copyright: (c) 2014 Broadcom Corporation
+# All Rights Reserved.$
+#
+
+#################### General Notes ########################
+# Our controller support both DDR4 and GDDR5, we need to "modify" ext_ram_columns in the following way:
+#   For DDR4, need to use column number as in DRAM Data Sheet, meaning 1024 in drams supported.
+#   For GDDR5, need to multiply number in Data Sheet by 8 (representing the 3 address bits, which are constant 000 in DDR4.), meaning 512 in drams supported.
+
+
+if $?dram_type_DDR4_SAMSUNG_K4A4G165WD_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=45320;\
+  config add ext_ram_t_rcd_wr=13320;\
+  config add ext_ram_t_rcd_rd=13320;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=13320;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=10c;\\
+  config add ext_ram_t_ccd_l=6c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_c_cas_latency=17c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+if $?dram_type_DDR4_MICRON_EDY4016AABG_DRFR_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=45320;\
+  config add ext_ram_t_rcd_wr=13320;\
+  config add ext_ram_t_rcd_rd=13320;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=13320;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=10c;\\
+  config add ext_ram_t_ccd_l=6c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_c_cas_latency=16c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+########################################################################
+# Note: Not for new design not recommended to be used and not supported
+########################################################################
+if $?dram_type_DDR4_MICRON_MT40A256M16HA_083EA_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=47000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=15000;\
+  config add ext_ram_t_rrd_l=11c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=15000;\
+  config add ext_ram_t_wr=14900;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=12c;\
+  config add ext_ram_t_rtp_l=12c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=12c;\\
+  config add ext_ram_t_ccd_l=8c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=170c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=18c;\
+  config add ext_ram_c_cas_latency=24c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+########################################################################
+# Note: Not for new design not recommended to be used and not supported
+########################################################################
+if $?dram_type_DDR4_MICRON_MT40A512M16_8GBIT "\
+    config add ext_ram_type=DDR4; \
+    config add ext_ram_t_rfc=350000;\
+    config add ext_ram_t_rc=45320;\
+    config add ext_ram_t_rcd_wr=13320;\
+    config add ext_ram_t_rcd_rd=13320;\
+    config add ext_ram_t_rrd_l=8c;\
+    config add ext_ram_t_rrd_s=7c;\
+    config add ext_ram_t_ras=32000;\
+    config add ext_ram_t_wr=15000;\
+    config add ext_ram_t_faw=30000;\
+    config add ext_ram_t_rtp_s=10c;\
+    config add ext_ram_t_rtp_l=10c;\
+    config add ext_ram_t_wtr_s=4c;\\
+    config add ext_ram_t_wtr_l=10c;\
+    config add ext_ram_t_ccd_l=8c;\
+    config add ext_ram_t_ccd_s=4c;\
+    config add ext_ram_t_zqcs=128c;\
+    config add ext_ram_t_crc_alert=13000;\
+    config add ext_ram_t_rst=500000000;\
+    config add ext_ram_t_ref=3900000;\
+    config add ext_ram_c_wr_latency=12c;\
+    config add ext_ram_c_cas_latency=16c;\
+    config add ext_ram_t_al=0;\
+    config add ext_ram_columns=1024; \
+    config add ext_ram_rows=65536; \
+    config add ext_ram_t_rp=13320;\
+    config add ext_ram_banks=8;"
+
+if $?dram_type_DDR4_HYNIX_H5AN4G6NMFR_VJC_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=45320;\
+  config add ext_ram_t_rcd_wr=13320;\
+  config add ext_ram_t_rcd_rd=13320;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=4c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=13320;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=7500;\
+  config add ext_ram_t_rtp_l=7500;\
+  config add ext_ram_t_wtr_s=2500;\
+  config add ext_ram_t_wtr_l=7500;\
+  config add ext_ram_t_ccd_l=8c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_crc_wr_latency=12c;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=16c;\
+  config add ext_ram_c_cas_latency=20c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+if $?dram_type_DDR4_MICRON_Y4016AABG_JD_F_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=47000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=15000;\
+  config add ext_ram_t_rrd_l=11c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=15000;\
+  config add ext_ram_t_wr=14900;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=12c;\
+  config add ext_ram_t_rtp_l=12c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=12c;\\
+  config add ext_ram_t_ccd_l=8c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=170c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=16c;\
+  config add ext_ram_c_cas_latency=24c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+if $?dram_type_GDDR5_SAMSUNG_K4G20325FD_2GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=78000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=16000;\
+  config add ext_ram_t_rrd_l=6000;\
+  config add ext_ram_t_rrd_s=6000;\
+  config add ext_ram_t_ras=34000;\
+  config add ext_ram_t_rp=14000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=24000;\
+  config add ext_ram_t_32aw=192000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=4c;\
+  config add ext_ram_t_wtr_s=8c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=3c;\
+  config add ext_ram_c_cas_latency=20c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=14c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=8192; \
+  config add ext_ram_banks=16;"
+
+########################################################################
+# Note: Not for new design not recommended to be used and not supported
+########################################################################
+if $?dram_type_GDDR5_SAMSUNG_K4G41325FC_4GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=110000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=16000;\
+  config add ext_ram_t_rrd_l=6000;\
+  config add ext_ram_t_rrd_s=6000;\
+  config add ext_ram_t_ras=34000;\
+  config add ext_ram_t_rp=14000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=24000;\
+  config add ext_ram_t_32aw=192000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=4c;\
+  config add ext_ram_t_wtr_s=8c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=3c;\
+  config add ext_ram_c_cas_latency=20c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=14c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_banks=16;"
+
+#if $?dram_type_GDDR5_HYNIX_H5GQ2H24AFR_R0C_2GBIT "\
+#  config add ext_ram_type=GDDR5; \
+#  config add ext_ram_t_rfc=120000;\
+#  config add ext_ram_t_rc=48000;\
+#  config add ext_ram_t_rcd_wr=14000;\
+#  config add ext_ram_t_rcd_rd=18000;\
+#  config add ext_ram_t_rrd_l=9c;\
+#  config add ext_ram_t_rrd_s=9c;\
+#  config add ext_ram_t_ras=32000;\
+#  config add ext_ram_t_rp=16000;\
+#  config add ext_ram_t_wr=16000;\
+#  config add ext_ram_t_faw=30000;\
+#  config add ext_ram_t_32aw=245000;\
+#  config add ext_ram_t_rtp_s=2c;\
+#  config add ext_ram_t_rtp_l=2c;\
+#  config add ext_ram_t_wtr_s=8c;\
+#  config add ext_ram_t_wtr_l=8c;\
+#  config add ext_ram_t_ccd_l=3c;\
+#  config add ext_ram_t_ccd_s=2c;\
+#  config add ext_ram_t_ref=3900000;\
+#  config add ext_ram_c_wr_latency=3c;\
+#  config add ext_ram_c_cas_latency=16c;\
+#  config add ext_ram_t_crc_rd_latency=2c;\
+#  config add ext_ram_t_crc_wr_latency=11c;\
+#  config add ext_ram_t_rst=200000000;\
+#  config add ext_ram_t_al=1c;\
+#  config add ext_ram_columns=512; \
+#  config add ext_ram_rows=8192; \
+#  config add ext_ram_banks=16;"
+#
+
+###################################################
+#     ELPIDA GDDR5
+###################################################
+if $?dram_type_GDDR5_MICRON_EDW4032CABG_4GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=90000;\
+  config add ext_ram_t_rc=44000;\
+  config add ext_ram_t_rcd_wr=13000;\
+  config add ext_ram_t_rcd_rd=17000;\
+  config add ext_ram_t_rrd_l=5000;\
+  config add ext_ram_t_rrd_s=5000;\
+  config add ext_ram_t_ras=27000;\
+  config add ext_ram_t_rp=17000;\
+  config add ext_ram_t_wr=18000;\
+  config add ext_ram_t_faw=20000;\
+  config add ext_ram_t_32aw=160000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=2c;\
+  config add ext_ram_t_wtr_s=7c;\
+  config add ext_ram_t_wtr_l=7c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=4c;\
+  config add ext_ram_c_cas_latency=18c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=11c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=2c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_banks=16;"
+
+if $?dram_type_GDDR5_HYNIX_H5GC4H24MFR_T2C_4GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=120000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=14000;\
+  config add ext_ram_t_rcd_rd=18000;\
+  config add ext_ram_t_rrd_l=9c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=16000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_32aw=245000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=2c;\
+  config add ext_ram_t_wtr_s=8c;\
+  config add ext_ram_t_wtr_l=8c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=4c;\
+  config add ext_ram_c_cas_latency=18c;\
+  config add ext_ram_t_crc_rd_latency=2c;\
+  config add ext_ram_t_crc_wr_latency=13c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_banks=16;"
+
+###############################################################################################
+# Note: For extended devices for example Micron dram_type_DDR4_MICRON_MT40A256M16HA_083E
+#       please use none extended parameters for example dram_type_DDR4_MICRON_MT40A256M16HA_083
+###############################################################################################
+if $?dram_type_DDR4_MICRON_MT40A256M16HA_083_4GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1200;\
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=46160;\
+  config add ext_ram_t_rcd_wr=14160;\
+  config add ext_ram_t_rcd_rd=14160;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=14160;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=6c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=32768;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=5;\
+  config add ext_ram_c_cas_latency=17c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_MICRON_MT40A256M16HA_083_4GBIT "\
+  config add ext_ram_c_cas_latency=20c;"
+
+if $?dram_type_DDR4_MICRON_MT40A512M16HA_083_8GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1200;\
+  config add ext_ram_t_rfc=350000;\
+  config add ext_ram_t_rc=46160;\
+  config add ext_ram_t_rcd_wr=14160;\
+  config add ext_ram_t_rcd_rd=14160;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=14160;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=6c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=65536;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=5;\
+  config add ext_ram_c_cas_latency=17c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_MICRON_MT40A512M16HA_083_8GBIT "\
+  config add ext_ram_c_cas_latency=20c;"
+
+if $?dram_type_DDR4_MICRON_MT40A256M16GE_062_4GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1600;\
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=47000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=15000;\
+  config add ext_ram_t_rrd_l=11c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=15000;\
+  config add ext_ram_t_wr=14900;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=12c;\
+  config add ext_ram_t_rtp_l=12c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=12c;\
+  config add ext_ram_t_ccd_l=8c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=170c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=16c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=32768;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=8;\
+  config add ext_ram_c_cas_latency=24c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_MICRON_MT40A256M16GE_062_4GBIT "\
+  config add ext_ram_c_cas_latency=28c;"
+
+if $?dram_type_DDR4_SAMSUNG_K4A4G165WE_4GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1200;\
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=46160;\
+  config add ext_ram_t_rcd_wr=14160;\
+  config add ext_ram_t_rcd_rd=14160;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=14160;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=6c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c ;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=32768;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=5;\
+  config add ext_ram_c_cas_latency=17c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_SAMSUNG_K4A4G165WE_4GBIT "\
+  config add ext_ram_c_cas_latency=20c;"
+
+if $?dram_type_GDDR5_MICRON_MT51K256M32HF_50_8GBIT "\
+  config add ext_ram_type=GDDR5;\
+  config add ext_ram_t_rfc=110000;\
+  config add ext_ram_t_rc=44000;\
+  config add ext_ram_t_rcd_wr=12000;\
+  config add ext_ram_t_rcd_rd=17000;\
+  config add ext_ram_t_rrd_l=5000;\
+  config add ext_ram_t_rrd_s=5000;\
+  config add ext_ram_t_ras=27000;\
+  config add ext_ram_t_rp=17000;\
+  config add ext_ram_t_wr=18000;\
+  config add ext_ram_t_faw=20000;\
+  config add ext_ram_t_32aw=160000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=2c;\
+  config add ext_ram_t_wtr_s=6c;\
+  config add ext_ram_t_wtr_l=6c;\
+  config add ext_ram_t_ccd_l=2c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=4c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=11c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=2c;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=16384;\
+  config add ext_ram_banks=16;\
+  config add ext_ram_c_cas_latency=16c;"
+expr $ext_ram_write_dbi==1
+if $? && $?dram_type_GDDR5_MICRON_MT51K256M32HF_50_8GBIT "\
+  config add ext_ram_c_cas_latency=16c;"
+
+if $?dram_type_GDDR5_SAMSUNG_K4G41325FE_HC28_4GBIT "\
+  config add ext_ram_type=GDDR5;\
+  config add ext_ram_t_rfc=110000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=16000;\
+  config add ext_ram_t_rrd_l=6000;\
+  config add ext_ram_t_rrd_s=6000;\
+  config add ext_ram_t_ras=34000;\
+  config add ext_ram_t_rp=14000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=24000;\
+  config add ext_ram_t_32aw=192000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=4c;\
+  config add ext_ram_t_wtr_s=3c;\
+  config add ext_ram_t_wtr_l=8c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=3c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=14c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512;\
+  config add ext_ram_rows=16384;\
+  config add ext_ram_banks=16;\
+  config add ext_ram_c_cas_latency=18c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_GDDR5_SAMSUNG_K4G41325FE_HC28_4GBIT "\
+  config add ext_ram_c_cas_latency=19c;"
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/config.bcm b/bal_release/3rdparty/bcm-sdk/rc/qax/config.bcm
new file mode 100755
index 0000000..4645da3
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/config.bcm
@@ -0,0 +1,2910 @@
+#
+# $Id: config-sand.bcm,v 1.140 2013/09/22 14:29:47 tomerma Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+
+#pci_override_dev.0=0x8375
+
+# Note: comment size is restricted to 128 charecters per line.
+
+#########################################
+##cfg for BCM88640 (PetraB), BCM88650 (Arad) and BCM88202 (Ardon)
+#########################################
+
+## temporary suppressing unknown soc properties warnings - till adding them unknown to property.h/propgen
+## (need to be the first soc property in the file).
+suppress_unknown_prop_warnings=1
+
+
+## Multi device system (Negev): 2 devices, fabric mode is FE, mod id is slot id
+## (Top line card is 0, button is 1).
+#diag_chassis=1
+
+## Disable diag init application. Should be used if one wants to run his own
+## application instead of the diag init example
+#diag_disable=1
+
+## Skip cosq configuration in diag_init
+#diag_cosq_disable=1
+#
+
+stack_enable.BCM88680=1
+tdma_timeout_usec.BCM88680=3000000
+tslam_timeout_usec.BCM88680=3000000
+diag_emulator_partial_init.BCM88680=0
+phy_simul.BCM88680=0
+
+
+## Skip l2 configuration in diag_init
+#diag_l2_disable=1
+
+## L2 mode to load 0=DEFAULT, 1=INGRESS_DIST, 2=INGRESS_CENT, 3=EGRESS_DIST, 4=EGRESS_CENT, 5=EGRESS_INDEPENDENT
+#                  6=(INGRESS_CENT + LEARN_CPU), 7=(EGRESS_CENT + LEARN_CPU)
+#l2_mode=0
+
+## Skip stk configuration in diag_init
+#diag_no_appl_stk=1
+
+## Skip itmh programmable mode configuration in diag_init
+#diag_no_itmh_prog_mode=1
+
+# Ingress PMF key allocation optimization
+field_key_allocation_msb_balance_enable=1
+
+## Set modid value. Should be used when running multi-fap system.
+## Each fap should have it's unique modid value. Default is described in diag_chassis.
+#module_id=<modid>
+
+## Set base_modid value. Default is 0.
+#base_module_id=<base_modid>
+
+## Set nof_devices value. Should be set when working on multi-faps system.
+## Default is 1 when diag_chassis is not enabled, or 2 when diag_chassis is enabled.
+#n_devices=<nof_devices>
+
+#########################################
+##cfg for BCM88650 - Arad
+#########################################
+
+### Device configuration ###
+
+## Activate Emulation partial init. Values: 0 - Normal, 1 - Emulation .Default: 0x0.
+diag_emulator_partial_init.BCM88650=0
+#diag_emulator_partial_init.BCM88270=1
+#diag_emulator_partial_init.BCM88680=1
+#diag_emulator_partial_init.BCM88675=2
+
+#real phy isn't connected - remove on silicon arrival
+#phy_simul.BCM88675=1
+
+## General
+# Set the FAP Device mode
+# Options: PP / TM / TDM_OPTIMIZED / TDM_STANDARD
+fap_device_mode.BCM88650=PP
+#
+# FIXME: SDK-91833
+# PP Fixed Followed SDK-91662
+#
+
+# Options: SYMMETRIC / ASYMMETRIC / SINGLE_CORE
+# For faster emulation, use SINGLE_CORE
+device_core_mode.BCM88675=SYMMETRIC
+device_core_mode.BCM88680=SYMMETRIC
+## Credit worth size (Bytes)
+credit_size.BCM88650=1024
+
+## KBP recovery - allow for recovery sequence to run during init and soft reset (only if necessary)
+custom_feature_kbp_recovery_enable=0
+
+## Clock configurations
+# Core clock speed (MHz). Default- BCM88650: 600 MHz, BCM88675: 720 MHz
+core_clock_speed_khz.BCM88650=600000
+core_clock_speed_khz.BCM88675=720000
+core_clock_speed_khz.BCM88470=600000
+core_clock_speed_khz.BCM88680=837500
+core_clock_speed_khz.BCM88270=250000
+
+# System reference clock (MHz). Default- BCM88650: 600 MHz, BCM88675: 800 MHz
+system_ref_core_clock_khz.BCM88650=1200000
+
+#fabric pcp
+fabric_pcp_enable.BCM88675=1
+
+#Using Tcam instead of the KAPS for the IPv4 MC and IPV6 MC
+# 0 - Don't use TACM
+# 1 - Use TCAM for IPV4/6 MC
+# 2 - Use TACM for IPV4/6 MC but don't use the VRF field as a qualifier for IPV4 MC entries
+#custom_feature_l3_mc_use_tcam=0
+
+#for IPv6UC: use Tcam instead of KAPS
+#Note that if this property is enabled the IPV6-UC RPF will be disabled
+#custom_feature_l3_ipv6_uc_use_tcam=0
+
+
+#ams pll override value (only for Jericho A0/A1)- possible values: 0x19, 0x1e, 0x1f. Default value 0x1f
+#custom_feature_ams_pll_override.BCM88675=0x1f
+
+### Network Interface configuration ###
+## Use of the ucode_port_<Local-Port-Id>=<Interface-type>[<Interface-Id>][.<Channel-Id>]
+## Local port range: 0 - 255.
+## Interface types: XAUI/RXAUI/SGMII/ILKN/10GBase-R/XLGE/CGE/CPU/IGNORE
+
+# Map bcm local port to CPU[.channel] interfaces
+ucode_port_0.BCM88650=CPU.0
+
+# Map bcm local port to Network-Interface[.channel] interfaces - TBD
+ucode_port_132.BCM88650=10GBase-R3
+ucode_port_131.BCM88650=10GBase-R2
+ucode_port_130.BCM88650=10GBase-R1
+ucode_port_129.BCM88650=10GBase-R0
+ucode_port_128.BCM88650=10GBase-R46
+#ucode_port_128.BCM88650=GE46
+
+ucode_port_6.BCM88650=10GBase-R22
+ucode_port_5.BCM88650=10GBase-R23
+ucode_port_4.BCM88650=10GBase-R16
+ucode_port_3.BCM88650=10GBase-R17
+ucode_port_2.BCM88650=10GBase-R45
+ucode_port_1.BCM88650=10GBase-R47
+
+custom_feature_nif_recovery_enable.BCM88650=1
+custom_feature_nif_recovery_iter.BCM88650=7
+custom_feature_skip_before_traffic_validation.BCM88675=0
+#custom_feature_mac_fifo_start_tx_thrs.BCM88675=9
+
+#redirect packets that are destined to invalid queues
+invalid_queue_redirect=0
+
+#CLP0
+#ucode_port_1.BCM88675=XE0:core_0.1
+#ucode_port_2.BCM88675=XE1:core_0.2
+#ucode_port_3.BCM88675=XE2:core_0.3
+#ucode_port_4.BCM88675=XE3:core_0.4
+#CLP1
+#ucode_port_5.BCM88675=XE4:core_0.5
+#ucode_port_6.BCM88675=XE5:core_0.6
+#ucode_port_7.BCM88675=XE6:core_0.7
+#ucode_port_8.BCM88675=XE7:core_0.8
+#CLP2
+#ucode_port_9.BCM88675=XE8:core_0.9
+#ucode_port_10.BCM88675=XE9:core_0.10
+#ucode_port_11.BCM88675=XE10:core_0.11
+#ucode_port_12.BCM88675=XE11:core_0.12
+#CLP3
+#ucode_port_13.BCM88675=XE12:core_0.13
+#ucode_port_14.BCM88675=XE13:core_0.14
+#ucode_port_15.BCM88675=XE14:core_0.15
+#ucode_port_16.BCM88675=XE15:core_0.16
+#CLP4
+#ucode_port_17.BCM88675=XE16:core_0.17
+#ucode_port_18.BCM88675=XE17:core_0.18
+#ucode_port_19.BCM88675=XE18:core_0.19
+#ucode_port_20.BCM88675=XE19:core_0.20
+#CLP5
+#ucode_port_21.BCM88675=XE20:core_0.21
+#ucode_port_22.BCM88675=XE21:core_0.22
+#ucode_port_23.BCM88675=XE22:core_0.23
+#ucode_port_24.BCM88675=XE23:core_0.24
+#XLP0
+#ucode_port_25.BCM88675=XE24:core_0.25
+#ucode_port_26.BCM88675=XE25:core_0.26
+#ucode_port_27.BCM88675=XE26:core_0.27
+#ucode_port_28.BCM88675=XE27:core_0.28
+#XLP1
+#ucode_port_29.BCM88675=XE28:core_0.29
+#ucode_port_30.BCM88675=XE29:core_0.30
+#ucode_port_31.BCM88675=XE30:core_0.31
+#ucode_port_32.BCM88675=XE31:core_0.32
+#XLP2
+#ucode_port_33.BCM88675=XE32:core_0.33
+#ucode_port_34.BCM88675=XE33:core_0.34
+#ucode_port_35.BCM88675=XE34:core_0.35
+#ucode_port_36.BCM88675=XE35:core_0.36
+#XLP3
+#ucode_port_37.BCM88675=XE36:core_0.37
+#ucode_port_38.BCM88675=XE37:core_0.38
+#ucode_port_39.BCM88675=XE38:core_0.39
+#ucode_port_40.BCM88675=XE39:core_0.40
+#XLP4 (not as PMQ0)
+#ucode_port_41.BCM88675=XE40:core_0.41
+#ucode_port_42.BCM88675=XE41:core_0.42
+#ucode_port_43.BCM88675=XE42:core_0.43
+#ucode_port_44.BCM88675=XE43:core_0.44
+#XLP5 (not as PMQ1)
+#ucode_port_45.BCM88675=XE44:core_0.45
+#ucode_port_46.BCM88675=XE45:core_0.46
+#ucode_port_47.BCM88675=XE46:core_0.47
+#ucode_port_48.BCM88675=XE47:core_0.48
+#XLP9
+#ucode_port_49.BCM88675=XE60:core_0.49
+#ucode_port_50.BCM88675=XE61:core_0.50
+#ucode_port_51.BCM88675=XE62:core_0.51
+#ucode_port_52.BCM88675=XE63:core_0.52
+#XLP10
+#ucode_port_53.BCM88675=XE64:core_0.53
+#ucode_port_54.BCM88675=XE65:core_0.54
+#ucode_port_55.BCM88675=XE66:core_0.55
+#ucode_port_56.BCM88675=XE67:core_0.56
+#XLP11 (not as PMQ3)
+#ucode_port_57.BCM88675=XE68:core_0.57
+#ucode_port_58.BCM88675=XE69:core_0.58
+#ucode_port_59.BCM88675=XE70:core_0.59
+#ucode_port_60.BCM88675=XE71:core_0.60
+
+
+ucode_port_0.BCM88675=CPU.0:core_0.0
+ucode_port_0.BCM88680=CPU.0:core_0.0
+ucode_port_200.BCM88675=CPU.8:core_1.200
+ucode_port_200.BCM88680=CPU.8:core_1.200
+ucode_port_201.BCM88675=CPU.16:core_0.201
+ucode_port_201.BCM88680=CPU.16:core_0.201
+ucode_port_202.BCM88675=CPU.24:core_1.202
+ucode_port_202.BCM88680=CPU.24:core_1.202
+ucode_port_203.BCM88675=CPU.32:core_0.203
+ucode_port_203.BCM88680=CPU.32:core_0.203
+
+#default ports for Jericho and QMX
+ucode_port_1.BCM88675=CGE0:core_0.1
+ucode_port_2.BCM88675=ILKN1:core_0.2
+ilkn_lanes_1.BCM88675=0xfff000
+ucode_port_3.BCM88675=ILKN2:core_0.3
+ilkn_lanes_2.BCM88675=0xfff
+ucode_port_17.BCM88675=CGE1:core_1.17
+
+#default ports for Jericho
+ucode_port_13.BCM88675=10GBase-R64:core_0.13
+ucode_port_14.BCM88675=10GBase-R65:core_0.14
+ucode_port_15.BCM88675=10GBase-R68:core_1.15
+ucode_port_16.BCM88675=10GBase-R69:core_1.16
+
+#default ports for Jericho Plus
+ucode_port_13.BCM88680=10GBase-R40:core_0.13
+ucode_port_14.BCM88680=10GBase-R43:core_0.14
+ucode_port_15.BCM88680=10GBase-R44:core_1.15
+ucode_port_16.BCM88680=10GBase-R46:core_1.16
+
+#default ports for QMX
+ucode_port_13.BCM88375_A0=10GBase-R64:core_0.13
+ucode_port_14.BCM88375_A0=10GBase-R66:core_0.14
+ucode_port_15.BCM88375_A0=10GBase-R69:core_1.15
+ucode_port_16.BCM88375_A0=10GBase-R71:core_1.16
+ 
+
+ucode_port_13.BCM88375_B0=10GBase-R64:core_0.13
+ucode_port_14.BCM88375_B0=10GBase-R66:core_0.14
+ucode_port_15.BCM88375_B0=10GBase-R69:core_1.15
+ucode_port_16.BCM88375_B0=10GBase-R71:core_1.16
+ 
+ 
+#default ports for QAX
+ucode_port_0.BCM88470=CPU.0:core_0.0
+
+ucode_port_200.BCM88470=CPU.8:core_0.200
+
+ucode_port_201.BCM88470=CPU.16:core_0.201
+
+ucode_port_202.BCM88470=CPU.24:core_0.202
+
+ucode_port_203.BCM88470=CPU.32:core_0.203
+
+tm_port_header_type_in_0.BCM88470=INJECTED_2_PP
+tm_port_header_type_out_0.BCM88470=CPU
+
+ucode_port_1.BCM88470=XE47:core_0.1
+ucode_port_2.BCM88470=XE45:core_0.2
+ucode_port_3.BCM88470=XE17:core_0.3
+ucode_port_4.BCM88470=XE16:core_0.4
+ucode_port_5.BCM88470=XE23:core_0.5
+ucode_port_6.BCM88470=XE22:core_0.6
+#port_init_speed_xe1.BCM88470=2500
+pon_application_support_enabled_1.BCM88470=TRUE
+pon_application_support_enabled_3.BCM88470=TRUE
+pon_application_support_enabled_4.BCM88470=TRUE
+pon_application_support_enabled_5.BCM88470=TRUE
+pon_application_support_enabled_6.BCM88470=TRUE
+
+bcm886xx_rx_use_hw_trap_id.BCM88650=0
+
+#ucode_port_128.BCM88470=GE46:core_0.128
+#port_init_speed_ge46.BCM88470=1000
+ucode_port_128.BCM88470=XE46:core_0.128
+ucode_port_132.BCM88470=XE3:core_0.132
+ucode_port_131.BCM88470=XE2:core_0.131
+ucode_port_130.BCM88470=XE1:core_0.130
+ucode_port_129.BCM88470=XE0:core_0.129
+
+bcm886xx_rx_use_hw_trap_id.BCM88470=0
+
+stable_filename.BCM88270=/tmp/warmboot_data
+fap_device_mode.BCM88270=PP
+#default ports for QUX
+ucode_port_0.BCM88270=CPU.0:core_0.0
+ucode_port_200.BCM88270=CPU.8:core_0.100
+ucode_port_201.BCM88270=CPU.16:core_0.101
+ucode_port_202.BCM88270=CPU.24:core_0.102
+ucode_port_203.BCM88270=CPU.32:core_0.103
+ucode_port_1.BCM88270=XE0:core_0.1
+ucode_port_2.BCM88270=XE1:core_0.2
+ucode_port_3.BCM88270=XE2:core_0.3
+ucode_port_13.BCM88270=GE12:core_0.13
+ucode_port_14.BCM88270=GE13:core_0.14
+ucode_port_15.BCM88270=GE14:core_0.15
+ucode_port_16.BCM88270=GE15:core_0.16
+ucode_port_17.BCM88270=GE16:core_0.17
+
+
+#Firmware mode:
+#(Documantation relevant for BCM886xx and BCM887xx)
+# 0=DEFAULT
+# 1=SFP_OPT_SR4     - optical short range
+# 2=SFP_DAC         - direct attach copper
+# 3=XLAUI           - 40G XLAUI mode
+# 4=FORCE_OSDFE     - force over sample digital feedback equalization
+# 5=FORCE_BRDFE     - force baud rate digital feedback equalization
+# 6=SW_CL72         - software cl72 with AN on
+# 7=CL72_WITHOUT_AN - cl72 without AN
+#For Negev2 chassis enable DFE is recommended
+serdes_firmware_mode.BCM88650=2
+serdes_firmware_mode_il.BCM88650=4
+serdes_firmware_mode_sfi.BCM88650=0
+serdes_firmware_mode_sfi.BCM88675=4
+serdes_firmware_mode_sfi.BCM88470=4
+serdes_firmware_mode_sfi.BCM88270=4
+serdes_firmware_mode_sfi.BCM88680=4
+
+
+#ucode_port_1.BCM88650=10GBase-R0
+#ucode_port_2.BCM88650=10GBase-R1
+#ucode_port_3.BCM88650=10GBase-R2
+#ucode_port_4.BCM88650=10GBase-R3
+#ucode_port_5.BCM88650=10GBase-R4
+#ucode_port_6.BCM88650=10GBase-R5
+#ucode_port_7.BCM88650=10GBase-R6
+#ucode_port_8.BCM88650=10GBase-R7
+#ucode_port_9.BCM88650=10GBase-R8
+#ucode_port_10.BCM88650=10GBase-R9
+#ucode_port_11.BCM88650=10GBase-R10
+#ucode_port_12.BCM88650=10GBase-R11
+#ucode_port_13.BCM88650=10GBase-R12
+#ucode_port_14.BCM88650=10GBase-R13
+#ucode_port_15.BCM88650=10GBase-R14
+#ucode_port_16.BCM88650=10GBase-R15
+#ucode_port_17.BCM88650=10GBase-R16
+#ucode_port_18.BCM88650=10GBase-R17
+#ucode_port_19.BCM88650=10GBase-R18
+#ucode_port_20.BCM88650=10GBase-R19
+ucode_port_200.BCM88650=CPU.8
+ucode_port_201.BCM88650=CPU.16
+ucode_port_202.BCM88650=CPU.24
+ucode_port_203.BCM88650=CPU.32
+
+#40G
+#ucode_port_1.BCM88650=XLGE0
+#ucode_port_2.BCM88650=XLGE1
+#ucode_port_3.BCM88650=XLGE2
+#ucode_port_4.BCM88650=XLGE3
+#ucode_port_5.BCM88650=XLGE4
+#ucode_port_6.BCM88650=XLGE5
+#ucode_port_7.BCM88650=XLGE6
+
+#ILKN configuration - basic config
+#ucode_port_31.BCM88650=ILKN0
+#ucode_port_32.BCM88650=ILKN1
+#ucode_port_32.BCM88675=ILKN1:core_0.32
+#ilkn_num_lanes_0.BCM88650=12
+#ilkn_num_lanes_1.BCM88650=12
+#port_init_speed_il.BCM88650=10312
+
+
+#ILKN per port channel stat
+#ilkn_counters_mode.BCM88650=PACKET_PER_CHANNEL
+
+#ILKN configuration - advanced
+#ilkn_metaframe_sync_period=2048
+#ILKN burst configuration - ILKN max burst suppored values: 128, 256
+#ILKN burst short should be lesser or equal to burst max /2
+#ilkn_burst_max.BCM88675=256
+#ilkn_burst_min.BCM88675=32
+# Enable\Disable ILKN status message sent through an out-of-band interface.
+# ilkn_interface_status_oob_ignore.BCM88650=1
+
+# ilkn_is_burst_interleaving<ilkn_id>
+# 1 - The channelized interface functions in burst interleaving mode (default). 0 - in full packet mode.
+#ilkn_is_burst_interleaving_1.BCM88675=0
+
+##ILKN retransmit
+#ilkn_retransmit_enable_rx.BCM88650=1
+#ilkn_retransmit_enable_tx.BCM88650=1
+#ilkn_retransmit_buffer_size.BCM88650=250
+#ilkn_retransmit_num_requests_resent.BCM88650=15
+#ilkn_retransmit_num_sn_repetitions_tx.BCM88650=1
+#ilkn_retransmit_num_sn_repetitions_rx.BCM88650=1
+#ilkn_retransmit_rx_timeout_words.BCM88650=3800
+#ilkn_retransmit_rx_timeout_sn.BCM88650=250
+#ilkn_retransmit_rx_ignore.BCM88650=80
+#ilkn_retransmit_rx_reset_when_error_enable.BCM88650=1
+#ilkn_retransmit_rx_watchdog.BCM88650=0
+#ilkn_retransmit_rx_reset_when_alligned_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_retry_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_after_disc_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_before_disc_error_enable.BCM88650=0
+#ilkn_retransmit_rx_reset_when_timout_error_enable.BCM88650=0
+#ilkn_retransmit_tx_wait_for_seq_num_change_enable.BCM88650=1
+#ilkn_retransmit_tx_ignore_requests_when_fifo_almost_empty.BCM88650=1
+
+#ucode_port_40.BCM88650=RCY.0
+#ucode_port_41.BCM88650=RCY.1
+#ucode_port_42.BCM88650=RCY.2
+
+## CAUI Configuration
+#ucode_port_41.BCM88650=CGE0
+#ucode_port_42.BCM88650=CGE1
+caui_num_lanes_0.BCM88650=10
+caui_num_lanes_1.BCM88650=10
+#Required for working IXIA 100G port:
+mld_lane_swap_lane20_ce.BCM88650=0
+mld_lane_swap_lane21_ce.BCM88650=1
+mld_lane_swap_lane0_ce.BCM88650=20
+mld_lane_swap_lane1_ce.BCM88650=21
+
+# This configures the lane polarity
+pb_serdes_lane_swap_polarity_tx_phy1.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy2.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy3.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy4.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy5.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy6.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy7.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy8.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy10.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy13.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy14.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy17.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy18.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy19.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy20.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy21.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy22.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy23.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy24.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy25.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy27.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy28.BCM88650=1
+
+pb_serdes_lane_swap_polarity_rx_phy1.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy2.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy3.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy4.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy5.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy6.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy7.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy8.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy10.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy13.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy14.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy17.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy18.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy19.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy20.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy21.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy22.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy23.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy24.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy25.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy27.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy28.BCM88650=1
+
+xgxs_tx_lane_map_quad0.BCM88650=0x1032
+xgxs_tx_lane_map_quad1.BCM88650=0x2310
+xgxs_tx_lane_map_quad2.BCM88650=0x3210
+xgxs_tx_lane_map_quad3.BCM88650=0x3210
+xgxs_tx_lane_map_quad4.BCM88650=0x1230
+xgxs_tx_lane_map_quad5.BCM88650=0x3201
+xgxs_tx_lane_map_quad6.BCM88650=0x2103
+xgxs_tx_lane_map_quad7.BCM88650=0x0123
+
+xgxs_rx_lane_map_quad0.BCM88650=0x3012
+xgxs_rx_lane_map_quad1.BCM88650=0x0132
+xgxs_rx_lane_map_quad2.BCM88650=0x1230
+xgxs_rx_lane_map_quad3.BCM88650=0x0123
+xgxs_rx_lane_map_quad4.BCM88650=0x3012
+xgxs_rx_lane_map_quad5.BCM88650=0x2013
+xgxs_rx_lane_map_quad6.BCM88650=0x2103
+
+
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88650=1
+
+#Port init mode
+#port_init_duplex=0
+#port_init_adv=0
+#port_init_autoneg=0
+
+
+# This disables serdes initialization
+# phy_null.BCM88650=1
+
+##  Number of Internal ports
+# Enable the ERP port. Values: 0 / 1.
+num_erp_tm_ports.BCM88650=1
+# Enable the OLP port. Values: 0 / 1.
+num_olp_tm_ports.BCM88650=1
+
+## Firmware Load Method
+load_firmware.BCM88650=0x102
+load_firmware.BCM88675=0x102
+load_firmware_fabric.BCM88675=0x102
+load_firmware_fabric.BCM88680=0x102
+
+### Headers configuration ###
+
+## Use of the tm_port_header_type_<Local-Port-Id>=<Header-type>
+## Default header type is derived from fap_device_mode: If fap_device_mode is
+## PP, default header type is ETH. Otherwise, defualt header type is TM.
+## Header type per port can be overriden.
+## All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/UDH_ETH
+## Injected header types: if PTCH, INJECTED (local Port of type TM) or INJECTED_PP (PP)
+##                        if PTCH-2, INJECTED_2 (local Port of type TM) or INJECTED_2_PP (PP)
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88650=TM
+
+tm_port_header_type_in_0.BCM88650=INJECTED_2
+tm_port_header_type_out_0.BCM88650=TM
+
+tm_port_header_type_in_200.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_200.BCM88650=ETH
+tm_port_header_type_in_201.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_201.BCM88650=ETH
+tm_port_header_type_in_202.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_202.BCM88650=ETH
+tm_port_header_type_in_203.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_203.BCM88650=ETH
+
+
+### Parser Configuration ###
+# Parser has 4 custom macros that are allocated dynamically and
+# configured according to the following features and soc properties:
+# Trill (1 macro) - trill_mode
+# FCoE (2 macros) - bcm886xx_fcoe_switch_mode
+# VxLAN (1 macro) - bcm886xx_vxlan_enable
+# IPv6-Extension-header (2 macros) - bcm886xx_ipv6_ext_hdr_enable
+# UDP (1 macro) - UDP parsing is enabled by default, and can be
+#  disabled with soc property custom_feature_udp_parse_disable
+#  When disabling UDP parsing VxLAN and 1588oUDP are affected
+
+
+# In FCoE NPV switch, if set to 1, 
+# packets that ingress from the N_PORT are treated as bridge
+# and packets that ingress from the NP_PORT are treated as router
+#fcoe_npv_bridge_mode=1
+# Enable IPv6 Extension Header, 0 - disable (default), 1 - enable
+#bcm886xx_ipv6_ext_hdr_enable=1
+
+# Disable UDP parsing, 0 - enable (default), 1 - disable
+#custom_feature_udp_parse_disable=1
+
+#OAMP/SAT port
+#tm_port_header_type_out_232.BCM88650=CPU
+tm_port_header_type_out_232.BCM88675=CPU
+
+### SAT
+## Enable SAT Interface. 0 - Disable, 1 - Enable (Default) 
+sat_enable=1
+
+# Set the recycling port processing to be raw (static forwarding)
+tm_port_header_type_rcy.BCM88650=RAW
+
+### RCPU
+# Valid CPU local ports on which RCPU packets can be received by slave device.
+#rcpu_rx_pbmp=0xf00000000000000000000000000000000000000000000000001
+
+#tm_port_header_type_514.BCM88650=RAW
+
+## Header extensions
+# Set if an FTMH Out-LIF extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS
+fabric_ftmh_outlif_extension.BCM88650=IF_MC
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88660: ENABLED, FULL_HASH
+# Options for 88650: ENABLED
+# Options for 88640 compatible: DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY
+# / 16B_STACKING_ROUTE_HISTORY / STANDBY_MC_LB (available only for AradPlus)
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88650=DISABLED
+
+# Set if an OTMH Out-LIF (CUD) Extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS / DOUBLE_TAG (two hop scheduling) / EXTENDED: Extended 24 bit CUD
+# Default: NEVER
+# tm_port_otmh_outlif_ext_mode_13.BCM88650=NEVER
+
+# Set if an OTMH Source-System-Port Extension is present.
+# Option: 0/1
+# Default: 0
+# tm_port_otmh_src_ext_enable_13.BCM88650=0
+
+#Trunk hash format, relevant only for AradPlus. Possible values: NORMAL (default) / INVERTED / DUPLICATED.
+#trunk_hash_format=NORMAL
+
+## Stacking Application
+#stacking_enable.BCM88650=1
+
+## Determine if FTMH Destination System Port Extension is added to all Ethernet packets.
+#ftmh_dsp_extension_add=1
+
+## Determine if FTMH Destination System Port Extension of mirrored/snooped packets is stamped with the original destination.
+#mirror_stamp_sys_on_dsp_ext=1
+
+## System RED
+# Set System-Red functionality.
+#system_red_enable.BCM88650=1
+
+# Indicate the size (Bytes) of a first header to skip
+# before the major header at ingress (e.g. Ethernet, ITMH)
+# It can be set per port also
+first_header_size.BCM88650=0
+
+# Indicate the size (Bytes) of the PMF Extension Headers
+# to remove for TM header type ports (expecting ITMH)
+# Set per port
+#post_headers_size_0.BCM88650=4
+
+# Indicate the size (Bytes) of the User-Headers: configurable
+# headers located in the fabric between internal headers and
+# Ethernet. Their values are set by Ingress FP, and can be used
+# by Egress FP or Egress Editor.
+# units: bits. 4 values can be set:
+# 0 - size of the 1st User-Header, for the Egress PMF. 0b / 8b / 16b
+# 1 - size of the 2nd User-Header, for the Egress PMF. 0b / 8b / 16b
+# The sum of these 2 values should be under 16b
+# 2, 3 - size of the 1st/2nd User-Header, for the Egress Editor.
+# 0b / 8b / 16b / 24b / 32b
+# Each of the global User-Header size must be under 32 bits, but not 24 bits.
+# The Egress FP field is always at the MSB of the User-Header
+# Not available for 88650-A0.
+#field_class_id_size_0.BCM88650=8
+#field_class_id_size_1.BCM88650=0
+#field_class_id_size_2.BCM88650=24
+#field_class_id_size_3.BCM88650=0
+
+
+### Trunk - LAG configuration ###
+# Set the number of LAGs: 1024, 512, 256, 128 or 64
+number_of_trunks.BCM88650=256
+# Using the lb-key's MSB in trunk resolutions.
+# 0 = use LSB (default)
+# 1 = use MSB
+trunk_resolve_use_lb_key_msb_stack = 0
+trunk_resolve_use_lb_key_msb_smooth_division = 0
+
+### SYNCE configuration ###
+## Synchronous Ethernet Signal Mode.
+## Options: TWO_DIFF_CLK, TWO_CLK_AND_VALID. Default: TWO_CLK_AND_VALID
+#sync_eth_mode.BCM88650=TWO_CLK_AND_VALID
+
+## Clock Source (single SerDes) lane in the specified NIF port.
+## Usage: sync_eth_clk_to_nif_id_clk_<clk_number>=<serdes_number>
+#sync_eth_clk_to_nif_id_clk_0.BCM88650=1
+#sync_eth_clk_to_nif_id_clk_1.BCM88650=1
+
+## Clock Divider for the selected recovered clock. Valid values: 1/2/4. Default: 1.
+## Usage: sync_eth_clk_divider_clk_<clk_number>=<1/2/4>
+#sync_eth_clk_divider_clk_0.BCM88650=1
+#sync_eth_clk_divider_clk_1.BCM88650=1
+
+## Usage: sync_eth_clk_to_port_id_clk_<clk_number>=<serdes_number>
+#sync_eth_clk_to_port_id_clk_0.BCM88675=13
+#sync_eth_clk_to_port_id_clk_1.BCM88675=13
+
+## Clock frequency selector for the selected recovered clock. Valid values: <125MHz-0/156.25MHz-1/25MHz-2>. Default: 1.
+## Usage: sync_eth_clk_divider_clk<clk_id>=<0-125MHz/1-156.25MHz/2-25MHz>
+#sync_eth_clk_divider_clk0.BCM88675=1
+#sync_eth_clk_divider_clk1.BCM88675=1
+
+## Enable the automatic squelch function for the recovered clock. Valid values: 0/1. Default: 0.
+## Usage: sync_eth_clk_squelch_enable_clk_<clk_number>=<0/1>
+#sync_eth_clk_squelch_enable_clk_0.BCM88650=0
+#sync_eth_clk_squelch_enable_clk_1.BCM88650=0
+
+### ELK configuration ###
+## External lookup (TCAM) Device type select, Indicate the External lookup Device type.
+# Value Options: NONE/NL88650. Default: NONE.
+#ext_tcam_dev_type=NL88650
+
+
+##External lookup (elk) ILKN lanes swap. If set, reverse the lanes numbering order on elk device side. DNX system default is 1.
+#ext_ilkn_reverse=0
+
+## Set ELK FWD table Size.
+# format: ext_xxx_fwd_table_size.
+# where xxx replaced by FWD options: ip4_uc_rpf/ip4_mc/ip6_uc_rpf/ip6/ip6_mc/trill_uc/trill_mc/mpls/coup_mpls
+# Value Options: (0) - External table disabled, >0: number of entries. Default: 0.
+#ext_ip4_uc_rpf_fwd_table_size=8192
+#ext_ip4_mc_fwd_table_size=8192
+
+#External TCAM result size, allows to modify each external tcam result size. 
+#The total size of the external result for NL12K = 120bit .
+#The size of each segment updates the corresponding qualifier bcmFieldQualifyExternalValue. 
+#Default values according to the device property.
+#in-case of double capacity use the following values: 48,48,24,24 and ext_tcam_result_size_segment_pad_3=24
+
+#ext_tcam_result_size_segment_0=48
+#ext_tcam_result_size_segment_1=32
+#ext_tcam_result_size_segment_2=24
+#ext_tcam_result_size_segment_3=16
+#ext_tcam_result_size_segment_4=32
+#ext_tcam_result_size_segment_5=32
+
+## Set ELK IP FWD use NetRoute  ALG.
+# Value Options: ALG_LPM_LPM/ALG_LPM_NETROUTE/ALG_LPM_TCAM. Default: ALG_LPM_TCAM.
+#ext_fwd_algorithm_lpm=ALG_LPM_TCAM
+
+## Set ELK interface mode.
+# Change ELK interface configuration to support CAUI port.
+# Value Options: 0/1. 0 - Normal mode, 1  2 CAUI port + ELK mode. Default: 0.
+#ext_interface_mode=0
+
+### Configure MDIO interface
+# External MDIO clock rate divisor . Default: 0x24.
+#rate_ext_mdio_divisor=0x36
+# External MDIO clock rate divisor. Default: 0x1.
+#rate_ext_mdio_dividend=1
+
+### TDM - OTN configuration ###
+# Options: 0 / TDM_OPTIMIZED / TDM_STANDARD
+fap_tdm_bypass.BCM88650=0
+
+### TDM - RAW/PACKET configuration ###
+# if fap_tdm_packet config to be true, enable specific ports on the device to configure for tdm packet mode traffic.
+fap_tdm_packet.BCM88650=0
+
+# Indicate if a Petra-B device is connected to the actual device
+# For TDM/OTN applications,
+# system_is_petra_b_in_system.BCM88650=0
+##Indicate if TDM can arrive throgh primary pipe.
+#Should be 1 for a System with PetraB that connected to fabric over primary pipe.
+fabric_tdm_over_primary_pipe.BCM88650=0
+
+### Fabric configuration ###
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88650=2
+#Possible values - KR_FEC, 64_66, RS_FEC, LL_RS_FEC
+backplane_serdes_encoding.BCM88675=RS_FEC
+backplane_serdes_encoding.BCM88470=RS_FEC
+backplane_serdes_encoding.BCM88270=RS_FEC
+backplane_serdes_encoding.BCM88680=RS_FEC
+
+#SFI speed rate
+port_init_speed_sfi.BCM88650=10312
+port_init_speed_sfi.BCM88675=25000
+port_init_speed_sfi.BCM88470=25000
+port_init_speed_sfi.BCM88270=25000
+port_init_speed_sfi.BCM88680=25000
+
+#CL72
+port_init_cl72_sfi.BCM88650=1
+port_init_cl72_sfi.BCM88675=1
+fabric_segmentation_enable.BCM88650=1
+
+## Fabric transmission mode
+# Set the Connect mode to the Fabric
+# Options: FE - presence of a Fabric device (single stage) / MULT_STAGE_FE -  Multi-stage /
+# SINGLE_FAP - stand-alone device / MESH - mesh / BACK2BACK - 2 devices in Mesh
+#fabric_connect_mode.BCM88650=SINGLE_FAP
+fabric_connect_mode.BCM88650=FE
+# The Jericho configuration below will be overriden in jer.soc for multi device configurations
+fabric_connect_mode.BCM88675=SINGLE_FAP
+fabric_connect_mode.BCM88470=SINGLE_FAP
+fabric_connect_mode.BCM88270=SINGLE_FAP
+fabric_connect_mode.BCM88680=SINGLE_FAP
+
+
+## Cell format configuration
+# Indicate if the traffic can be sent in dual pipe
+is_dual_mode.BCM88650=0
+# Indicate on the existance of dual pipe device mode in system
+system_is_dual_mode_in_system.BCM88650=0
+
+# Indicate the format of the cell:
+# A VCS128 cell is used if system_is_vcs_128_in_system or system_is_fe600_in_system is TRUE
+system_is_vcs_128_in_system.BCM88650=0
+system_is_fe600_in_system.BCM88650=0
+
+### WRED ###
+
+# Set the maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88650=0
+
+### OCB (On-Chip Buffer) configuration ###
+# Enable the OCB
+# Enable MODES:
+#   0/FALSE        -->  OCB_DISABLED     --> No OCB use
+#   1/TRUE         -->  OCB_ENABLED      --> Like in Arad-A0/B0. Some packets may use both DRAM and OCB resources
+#   ONE_WAY_BYPASS -->  Depends on number of present drams (available only for AradPlus):
+#                      0 drams:   - OCB_ONLY
+#                      1 drams:   - OCB_ONLY_1_DRAM     -->  : OCB-only with 1 DRAM for the free pointers
+#                      2-8 drams: - OCB_DRAM_SEPARATE   -->  : OCB and DRAM coexist separately
+#   Default: TRUE.
+bcm886xx_ocb_enable.BCM88650=1
+
+## OCB (On-Chip Buffer) configuration
+# OCB modes:
+#   0 - Disabled
+#   1 - Enabled (Default).
+bcm886xx_ocb_enable.BCM88675=1
+
+# OCB Data Buffer size. Possible values: 128/256/512/1024. Default: 256.
+bcm886xx_ocb_databuffer_size.BCM88650=256
+# OCB Data Buffer size. Jericho allowed values: 256/512. Default: 256.
+bcm886xx_ocb_databuffer_size.BCM88675=256
+# Repartition between Unicast and Full Multicast buffers.
+# 0: 80% Unicast and 20% Multicast, 1: Unicast-Only
+bcm886xx_ocb_repartition.BCM88650=0
+
+
+### PDM configuration ###
+# Set the PDM Mode.
+# 0: simple (default), 1: extended (mandatory for LLFC-VSQ, PFC-VSQ, or ST-VSQ)
+bcm886xx_pdm_mode.BCM88650=0
+
+### Multicast Number of DBuff mode ###
+# Set IQM FMC buffers-replication sizes
+# Options for 88650: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE/ARAD_INIT_FMC_64_REP_128K_DBUFF_MODE
+# Default: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88650=ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+
+### Multicast Number of DBuff mode ###
+# Set FMC buffers-replication sizes
+# Options for 88675:
+#    JERICHO_INIT_FMC_64_REP_512K_DBUFF_MODE
+#    JERICHO_INIT_FMC_4K_REP_256K_DBUFF_MODE (Default)
+#    JERICHO_INIT_FMC_NO_REP_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88675=JERICHO_INIT_FMC_4K_REP_256K_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88470=JERICHO_INIT_FMC_NO_REP_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88270=JERICHO_INIT_FMC_NO_REP_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88680=JERICHO_INIT_FMC_4K_REP_256K_DBUFF_MODE
+
+
+### Multicast configuration ###
+# Multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_max.BCM88650=4095
+
+#### Jericho configuration of the number of ingress/egress multicast groups
+# Ingress max MCID can be up to 131070, Egress max MCID in Mesh or single FAP modes is up to 65535,
+# or otherwise is up to 131071.
+#multicast_ingress_group_id_range_max.BCM88675=32768
+#multicast_egress_group_id_range_max.BCM88675=60000
+
+### VOQ - Flow configuration ###
+
+# Set the VOQ mapping mode:
+# DIRECT: More than 4K System Ports are supported. System-level WRED is not supported.
+# INDIRECT: similar to Petra-B. Up to 4K System Ports.
+voq_mapping_mode.BCM88650=INDIRECT
+
+#Enable/disable HQOS support - mapping of many system ports to single modport
+hqos_mapping_enable.BCM88650=0
+
+# Set the Base Queue to be added to the packet flow-id
+# when the Flow-Id is set explicitely either by the ITMH
+# or by the Destination resolution in the Packet processing
+flow_mapping_queue_base.BCM88650=0
+
+
+# The allocation of the total per core resources between source and
+# queue based reservation depends on one of two guarantee modes: strict and loose.
+#ingress_congestion_management_guarantee_mode={STRICT,LOOSE} default: STRICT
+ingress_congestion_management_guarantee_mode=LOOSE
+# Each DP has its own thresholds for source based (dynamic) and for queue based (pools 0,1 and headroom).
+#  ingress_congestion_management_{source,queue,all}_threshold_percentage_color_[0-3]=[0-100] default: 100,85,75,0
+#  ingress_congestion_management_{ocb_only,dram_mix}_{pool_{0,1},headroom}=size default: 0
+#  ingress_congestion_management_min_resource_percentage_dynamic=[0-80] default: 20
+
+# Configure maximum IDs of ST-VSQs, maximum IDs of TM-ports, and enabling/disabling header compensation. 
+ingress_congestion_management_stag_max_id.BCM88675=0
+ingress_congestion_management_tm_port_max_id.BCM88675=255
+ingress_congestion_management_pkt_header_compensation_enable.BCM88675=0
+
+# The number of packet buffers used for the allocation of DMA memory at BCM RX task
+# The pool size determined by nof_pkts (256) * 16K.
+#rx_pool_nof_pkts.BCM88675=256
+
+
+# Set the number of priorities supported at egress per Port
+# Options: 1 / 2 / 8
+port_priorities.BCM88650=8
+port_priorities.BCM88675=2
+port_priorities.BCM88470=2
+port_priorities.BCM88270=2
+port_priorities.BCM88680=2
+
+
+# Set the shared multicast resource mode: Strict / Discrete
+egress_shared_resources_mode.BCM88650=Strict
+
+# Define outgoing port rate mode in data rate or packet rate.
+# Options: DATA / PACKET
+otm_port_packet_rate.BCM88650=DATA
+
+# Set Port egress recycling scheduler configuration.
+# 0: Strict Priority Scheduler, 1: Round Robin Scheduler
+port_egress_recycling_scheduler_configuration.BCM88650=0
+
+# Set statically the region mode per region id
+# 0: queue connectors only (InterDigitated = FALSE, OddEven = TRUE)
+# 1: queue connectors, SE (InterDigitated =TRUE, OddEven = TRUE)
+# 2: queue connectors, SE (InterDigitated =TRUE, OddEven = FALSE)
+dtm_flow_mapping_mode_region_65.BCM88650=0
+dtm_flow_mapping_mode_region_66.BCM88650=0
+dtm_flow_mapping_mode_region_67.BCM88650=0
+dtm_flow_mapping_mode_region_68.BCM88650=0
+dtm_flow_mapping_mode_region_69.BCM88650=0
+dtm_flow_mapping_mode_region_70.BCM88650=0
+dtm_flow_mapping_mode_region_71.BCM88650=0
+dtm_flow_mapping_mode_region_72.BCM88650=0
+dtm_flow_mapping_mode_region_73.BCM88650=0
+dtm_flow_mapping_mode_region_74.BCM88650=0
+dtm_flow_mapping_mode_region_75.BCM88650=0
+dtm_flow_mapping_mode_region_76.BCM88650=0
+dtm_flow_mapping_mode_region_77.BCM88650=0
+dtm_flow_mapping_mode_region_78.BCM88650=0
+dtm_flow_mapping_mode_region_79.BCM88650=0
+dtm_flow_mapping_mode_region_80.BCM88650=0
+dtm_flow_mapping_mode_region_81.BCM88650=1
+dtm_flow_mapping_mode_region_82.BCM88650=1
+dtm_flow_mapping_mode_region_83.BCM88650=1
+dtm_flow_mapping_mode_region_84.BCM88650=1
+dtm_flow_mapping_mode_region_85.BCM88650=1
+dtm_flow_mapping_mode_region_86.BCM88650=1
+dtm_flow_mapping_mode_region_87.BCM88650=1
+dtm_flow_mapping_mode_region_88.BCM88650=1
+dtm_flow_mapping_mode_region_89.BCM88650=1
+dtm_flow_mapping_mode_region_90.BCM88650=1
+dtm_flow_mapping_mode_region_91.BCM88650=1
+dtm_flow_mapping_mode_region_92.BCM88650=1
+dtm_flow_mapping_mode_region_93.BCM88650=1
+dtm_flow_mapping_mode_region_94.BCM88650=1
+dtm_flow_mapping_mode_region_95.BCM88650=1
+dtm_flow_mapping_mode_region_96.BCM88650=1
+dtm_flow_mapping_mode_region_97.BCM88650=1
+dtm_flow_mapping_mode_region_98.BCM88650=1
+dtm_flow_mapping_mode_region_99.BCM88650=2
+dtm_flow_mapping_mode_region_100.BCM88650=2
+dtm_flow_mapping_mode_region_101.BCM88650=2
+dtm_flow_mapping_mode_region_102.BCM88650=2
+dtm_flow_mapping_mode_region_103.BCM88650=2
+dtm_flow_mapping_mode_region_104.BCM88650=2
+dtm_flow_mapping_mode_region_105.BCM88650=2
+dtm_flow_mapping_mode_region_106.BCM88650=2
+dtm_flow_mapping_mode_region_107.BCM88650=2
+dtm_flow_mapping_mode_region_108.BCM88650=2
+dtm_flow_mapping_mode_region_109.BCM88650=2
+dtm_flow_mapping_mode_region_110.BCM88650=2
+dtm_flow_mapping_mode_region_111.BCM88650=2
+dtm_flow_mapping_mode_region_112.BCM88650=2
+dtm_flow_mapping_mode_region_113.BCM88650=2
+dtm_flow_mapping_mode_region_114.BCM88650=2
+dtm_flow_mapping_mode_region_115.BCM88650=2
+dtm_flow_mapping_mode_region_116.BCM88650=2
+dtm_flow_mapping_mode_region_117.BCM88650=2
+dtm_flow_mapping_mode_region_118.BCM88650=2
+dtm_flow_mapping_mode_region_119.BCM88650=2
+dtm_flow_mapping_mode_region_120.BCM88650=2
+dtm_flow_mapping_mode_region_121.BCM88650=2
+dtm_flow_mapping_mode_region_122.BCM88650=2
+dtm_flow_mapping_mode_region_123.BCM88650=2
+dtm_flow_mapping_mode_region_124.BCM88650=2
+dtm_flow_mapping_mode_region_125.BCM88650=2
+dtm_flow_mapping_mode_region_126.BCM88650=2
+dtm_flow_mapping_mode_region_127.BCM88650=2
+dtm_flow_mapping_mode_region_128.BCM88650=2
+
+## Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88650=2
+dtm_flow_nof_remote_cores_region_2.BCM88650=2
+dtm_flow_nof_remote_cores_region_3.BCM88650=2
+dtm_flow_nof_remote_cores_region_4.BCM88650=2
+dtm_flow_nof_remote_cores_region_5.BCM88650=2
+dtm_flow_nof_remote_cores_region_6.BCM88650=2
+dtm_flow_nof_remote_cores_region_7.BCM88650=2
+dtm_flow_nof_remote_cores_region_8.BCM88650=2
+dtm_flow_nof_remote_cores_region_9.BCM88650=2
+dtm_flow_nof_remote_cores_region_10.BCM88650=2
+dtm_flow_nof_remote_cores_region_11.BCM88650=2
+dtm_flow_nof_remote_cores_region_12.BCM88650=2
+dtm_flow_nof_remote_cores_region_13.BCM88650=2
+dtm_flow_nof_remote_cores_region_14.BCM88650=2
+dtm_flow_nof_remote_cores_region_15.BCM88650=2
+dtm_flow_nof_remote_cores_region_16.BCM88650=2
+dtm_flow_nof_remote_cores_region_17.BCM88650=2
+dtm_flow_nof_remote_cores_region_18.BCM88650=2
+dtm_flow_nof_remote_cores_region_19.BCM88650=2
+dtm_flow_nof_remote_cores_region_20.BCM88650=2
+dtm_flow_nof_remote_cores_region_21.BCM88650=2
+dtm_flow_nof_remote_cores_region_22.BCM88650=2
+dtm_flow_nof_remote_cores_region_23.BCM88650=2
+dtm_flow_nof_remote_cores_region_24.BCM88650=2
+dtm_flow_nof_remote_cores_region_25.BCM88650=2
+dtm_flow_nof_remote_cores_region_26.BCM88650=2
+dtm_flow_nof_remote_cores_region_27.BCM88650=2
+dtm_flow_nof_remote_cores_region_28.BCM88650=2
+dtm_flow_nof_remote_cores_region_29.BCM88650=2
+dtm_flow_nof_remote_cores_region_30.BCM88650=2
+dtm_flow_nof_remote_cores_region_31.BCM88650=2
+dtm_flow_nof_remote_cores_region_32.BCM88650=2
+dtm_flow_nof_remote_cores_region_33.BCM88650=2
+dtm_flow_nof_remote_cores_region_34.BCM88650=2
+dtm_flow_nof_remote_cores_region_35.BCM88650=2
+dtm_flow_nof_remote_cores_region_36.BCM88650=2
+dtm_flow_nof_remote_cores_region_37.BCM88650=2
+dtm_flow_nof_remote_cores_region_38.BCM88650=2
+dtm_flow_nof_remote_cores_region_39.BCM88650=2
+dtm_flow_nof_remote_cores_region_40.BCM88650=2
+dtm_flow_nof_remote_cores_region_41.BCM88650=2
+dtm_flow_nof_remote_cores_region_42.BCM88650=2
+dtm_flow_nof_remote_cores_region_43.BCM88650=2
+dtm_flow_nof_remote_cores_region_44.BCM88650=2
+dtm_flow_nof_remote_cores_region_45.BCM88650=2
+dtm_flow_nof_remote_cores_region_46.BCM88650=2
+dtm_flow_nof_remote_cores_region_47.BCM88650=2
+dtm_flow_nof_remote_cores_region_48.BCM88650=2
+dtm_flow_nof_remote_cores_region_49.BCM88650=2
+dtm_flow_nof_remote_cores_region_50.BCM88650=2
+dtm_flow_nof_remote_cores_region_51.BCM88650=2
+dtm_flow_nof_remote_cores_region_52.BCM88650=2
+dtm_flow_nof_remote_cores_region_53.BCM88650=2
+dtm_flow_nof_remote_cores_region_54.BCM88650=2
+dtm_flow_nof_remote_cores_region_55.BCM88650=2
+dtm_flow_nof_remote_cores_region_56.BCM88650=2
+dtm_flow_nof_remote_cores_region_57.BCM88650=2
+dtm_flow_nof_remote_cores_region_58.BCM88650=2
+dtm_flow_nof_remote_cores_region_59.BCM88650=2
+dtm_flow_nof_remote_cores_region_60.BCM88650=2
+#dtm_flow_nof_remote_cores_region_core0_2.BCM88675=2
+
+## Configure number of symmetric cores each region supports ##
+#device_core_mode.BCM88470=SINGLE_CORE
+# IL region has offset of 63, i.e. region_1 here will show as region 64 in code
+## Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88470=2
+dtm_flow_nof_remote_cores_region_2.BCM88470=2
+dtm_flow_nof_remote_cores_region_3.BCM88470=1
+dtm_flow_nof_remote_cores_region_4.BCM88470=1
+dtm_flow_nof_remote_cores_region_5.BCM88470=2
+dtm_flow_nof_remote_cores_region_6.BCM88470=1
+dtm_flow_nof_remote_cores_region_7.BCM88470=2
+dtm_flow_nof_remote_cores_region_8.BCM88470=2
+dtm_flow_nof_remote_cores_region_9.BCM88470=1
+dtm_flow_nof_remote_cores_region_10.BCM88470=1
+dtm_flow_nof_remote_cores_region_11.BCM88470=1
+dtm_flow_nof_remote_cores_region_12.BCM88470=1
+dtm_flow_nof_remote_cores_region_13.BCM88470=1
+dtm_flow_nof_remote_cores_region_14.BCM88470=1
+dtm_flow_nof_remote_cores_region_15.BCM88470=1
+dtm_flow_nof_remote_cores_region_16.BCM88470=1
+dtm_flow_nof_remote_cores_region_17.BCM88470=1
+dtm_flow_nof_remote_cores_region_18.BCM88470=2
+dtm_flow_nof_remote_cores_region_19.BCM88470=1
+dtm_flow_nof_remote_cores_region_20.BCM88470=1
+dtm_flow_nof_remote_cores_region_21.BCM88470=1
+dtm_flow_nof_remote_cores_region_22.BCM88470=1
+dtm_flow_nof_remote_cores_region_23.BCM88470=1
+dtm_flow_nof_remote_cores_region_24.BCM88470=1
+dtm_flow_nof_remote_cores_region_25.BCM88470=1
+dtm_flow_nof_remote_cores_region_26.BCM88470=1
+dtm_flow_nof_remote_cores_region_27.BCM88470=1
+dtm_flow_nof_remote_cores_region_28.BCM88470=1
+dtm_flow_nof_remote_cores_region_29.BCM88470=1
+dtm_flow_nof_remote_cores_region_30.BCM88470=1
+dtm_flow_nof_remote_cores_region_31.BCM88470=1
+dtm_flow_nof_remote_cores_region_32.BCM88470=1
+dtm_flow_nof_remote_cores_region_33.BCM88470=1
+dtm_flow_nof_remote_cores_region_34.BCM88470=1
+dtm_flow_nof_remote_cores_region_35.BCM88470=1
+dtm_flow_nof_remote_cores_region_36.BCM88470=1
+
+dtm_flow_nof_remote_cores_region_37.BCM88470=1
+dtm_flow_nof_remote_cores_region_38.BCM88470=1
+dtm_flow_nof_remote_cores_region_39.BCM88470=1
+dtm_flow_nof_remote_cores_region_40.BCM88470=1
+dtm_flow_nof_remote_cores_region_41.BCM88470=1
+dtm_flow_nof_remote_cores_region_42.BCM88470=1
+dtm_flow_nof_remote_cores_region_43.BCM88470=1
+dtm_flow_nof_remote_cores_region_44.BCM88470=1
+dtm_flow_nof_remote_cores_region_45.BCM88470=1
+dtm_flow_nof_remote_cores_region_46.BCM88470=1
+dtm_flow_nof_remote_cores_region_47.BCM88470=1
+dtm_flow_nof_remote_cores_region_48.BCM88470=1
+dtm_flow_nof_remote_cores_region_49.BCM88470=1
+dtm_flow_nof_remote_cores_region_50.BCM88470=1
+dtm_flow_nof_remote_cores_region_51.BCM88470=1
+dtm_flow_nof_remote_cores_region_52.BCM88470=1
+dtm_flow_nof_remote_cores_region_53.BCM88470=1
+dtm_flow_nof_remote_cores_region_54.BCM88470=1
+dtm_flow_nof_remote_cores_region_55.BCM88470=1
+dtm_flow_nof_remote_cores_region_56.BCM88470=1
+dtm_flow_nof_remote_cores_region_57.BCM88470=1
+dtm_flow_nof_remote_cores_region_58.BCM88470=1
+dtm_flow_nof_remote_cores_region_59.BCM88470=1
+dtm_flow_nof_remote_cores_region_60.BCM88470=1
+
+dtm_flow_mapping_mode_region_33.BCM88470=0
+dtm_flow_mapping_mode_region_34.BCM88470=0
+dtm_flow_mapping_mode_region_35.BCM88470=0
+dtm_flow_mapping_mode_region_36.BCM88470=0
+dtm_flow_mapping_mode_region_37.BCM88470=0
+dtm_flow_mapping_mode_region_38.BCM88470=0
+dtm_flow_mapping_mode_region_39.BCM88470=0
+dtm_flow_mapping_mode_region_40.BCM88470=0
+
+## Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88270=2
+dtm_flow_nof_remote_cores_region_2.BCM88270=2
+dtm_flow_nof_remote_cores_region_3.BCM88270=2
+dtm_flow_nof_remote_cores_region_4.BCM88270=2
+dtm_flow_nof_remote_cores_region_5.BCM88270=2
+dtm_flow_nof_remote_cores_region_6.BCM88270=2
+dtm_flow_nof_remote_cores_region_7.BCM88270=2
+dtm_flow_nof_remote_cores_region_8.BCM88270=2
+dtm_flow_nof_remote_cores_region_9.BCM88270=2
+dtm_flow_nof_remote_cores_region_10.BCM88270=2
+dtm_flow_nof_remote_cores_region_11.BCM88270=2
+dtm_flow_nof_remote_cores_region_12.BCM88270=2
+dtm_flow_nof_remote_cores_region_13.BCM88270=2
+dtm_flow_nof_remote_cores_region_14.BCM88270=2
+dtm_flow_nof_remote_cores_region_15.BCM88270=2
+dtm_flow_nof_remote_cores_region_16.BCM88270=2
+dtm_flow_nof_remote_cores_region_17.BCM88270=2
+dtm_flow_nof_remote_cores_region_18.BCM88270=2
+dtm_flow_nof_remote_cores_region_19.BCM88270=1
+dtm_flow_nof_remote_cores_region_20.BCM88270=1
+dtm_flow_nof_remote_cores_region_21.BCM88270=1
+dtm_flow_nof_remote_cores_region_22.BCM88270=1
+dtm_flow_nof_remote_cores_region_23.BCM88270=1
+dtm_flow_nof_remote_cores_region_24.BCM88270=1
+dtm_flow_nof_remote_cores_region_25.BCM88270=1
+dtm_flow_nof_remote_cores_region_26.BCM88270=1
+dtm_flow_nof_remote_cores_region_27.BCM88270=1
+dtm_flow_nof_remote_cores_region_28.BCM88270=1
+dtm_flow_nof_remote_cores_region_29.BCM88270=1
+dtm_flow_nof_remote_cores_region_30.BCM88270=1
+dtm_flow_nof_remote_cores_region_31.BCM88270=1
+dtm_flow_nof_remote_cores_region_32.BCM88270=1
+
+dtm_flow_mapping_mode_region_17.BCM88270=0
+dtm_flow_mapping_mode_region_18.BCM88270=0
+dtm_flow_mapping_mode_region_19.BCM88270=0
+dtm_flow_mapping_mode_region_20.BCM88270=0
+
+### Flow Control configuration ###
+# Set the Flow control type per Port.
+# Options: LL (Link-level) / CB2 (Class-Based - 2 classes) /
+# CB8 (Class-Based - 8 classes)
+# flow_control_type.BCM88650=LL
+
+## Out-Of-Band Flow control configuration
+#spn_FC_OOB_TYPE, spn_FC_OOB_MODE, spn_FC_OOB_CALENDER_LENGTH, spn_FC_OOB_CALENDER_REP_COUNT,
+
+## Set voltage mode for oob interfaces
+#HSTL_1.5V
+#3.3V
+#HSTL_1.5V_VDDO_DIV_2
+ext_voltage_mode_oob=3.3V
+
+## Inband Interlaken configuration
+# spn_FC_INBAND_INTLKN_MODE, spn_FC_INBAND_INTLKN_CALENDER_LENGTH, spn_FC_INBAND_INTLKN_CALENDER_REP_COUNT
+# spn_FC_INBAND_INTLKN_CALENDER_LLFC_MODE, spn_FC_INBAND_INTLKN_LLFC_MUB_ENABLE_MASK
+
+### Meter engine configuration ###
+
+# Specify meter operation mode
+# 32 - Two meters per packet (32k total)
+# 64 - One meter per packet (64k total) or two meter per packet in dual core device configured as SINGLE_CORE (128K total)
+# 128 - One meter per packet in dual core device configured as SINGLE_CORE (128K total)
+# Options: 0, 32, 64, 128
+policer_ingress_count.BCM88650=32
+policer_ingress_count.BCM88470=32
+policer_ingress_count.BCM88270=32
+policer_ingress_count.BCM88680=32
+
+
+# For meters in double 32k/64K mode, determine the sharing mode
+# Options:
+# 0 - NONE - For 64k or 128K (one meter per packet)
+# 1 - SERIAL - 32k mode only (two meters per packet)
+# 2 - PARALLEL - For 32k or 64k (two meter per packet)
+policer_ingress_sharing_mode.BCM88650=1
+policer_ingress_sharing_mode.BCM88470=1
+policer_ingress_sharing_mode.BCM88270=1
+policer_ingress_sharing_mode.BCM88680=1
+
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine the mapping
+# Options: BEST, WORST
+# policer_result_parallel_color_map.BCM88650=WORST
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine how the buckets are changed
+# Options: CONSTANT, TRANSPARENT, DEFERRED
+# policer_result_parallel_bucket_update.BCM88650=CONSTANT
+
+# Applies only to Arad+ (88660)
+# Set the Ethernet policer to work in color blind mode
+# rate_color_blind.BCM88650=1
+
+# L2 learn limit mode
+# Options: VLAN, VLAN_PORT, TUNNEL or the numeric equivalent 0-2.
+# Default: VLAN
+# l2_learn_limit_mode = VLAN_PORT
+
+# Applies only to Arad+ (88660)
+# Determines the L2 learn limit ranges when l2_learn_limit_mode is set to VLAN_PORT
+# Two range bases can be selected, each of 16K size.
+# Options: 0, 16K, 32K, 48K.
+# Default: 0 & 16K
+# l2_learn_lif_range_base_0 = 0
+# l2_learn_lif_range_base_1 = 16K
+
+# SW shadow mode for exact match tables. Required for SER support and DBAL diagnostics.
+#   0 - Disabled (Default)
+#   1 - Enabled
+#   2 - Disabled for LEM, enabled for other exact match tables
+exact_match_tables_shadow_enable.BCM88650 = 1
+exact_match_tables_shadow_enable.BCM88675 = 2
+
+# determine how many cmcs connected to the CPU. 
+# default value = 1
+# applies only to jericho and above. 
+pci_cmcs_num.88675 = 3
+pci_cmcs_num.88470 = 3
+
+### Counter engine configuration ###
+
+# Set the Counter source
+# Options: INGRESS_FIELD / INGRESS_VOQ / INGRESS_VSQ / INGRESS_CNM / 
+# INGRESS_LATENCY / EGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM (per queue) / EGRESS_TM_PORT (per port)
+# EGRESS_RECEIVE_VSI / EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM (per queue) / EGRESS_RECEIVE_TM_PORT (per port)
+# INGRESS_OAM / EGRESS_OAM
+# 2 Counter-Pointers can be set (with _0 and _1) for
+# INGRESS_FIELD / EGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT
+# Range extension can be set (with _LSB and _MSB) for
+# INGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT /EGRESS_RECEIVE_VSI /
+# EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM / EGRESS_RECEIVE_TM_PORT
+counter_engine_source_0.BCM88650=INGRESS_FIELD_0
+counter_engine_source_1.BCM88650=INGRESS_FIELD_1
+counter_engine_source_2.BCM88650=INGRESS_VOQ
+counter_engine_source_3.BCM88650=EGRESS_FIELD
+
+# Configure the statistic interface egress transmit PP source and the ingress received PP source
+# Options for egress: EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT (the default is TM)
+# Options for ingress: INGRESS_VSI / INGRESS_IN_LIF / INGRESS_TM (the default is TM)
+# valid just when there is no conflict with the other counter engines
+#counter_engine_source_egress_pp_stat0.BCM88650=EGRESS_TM
+#counter_engine_source_egress_pp_stat1.BCM88650=EGRESS_VSI
+#counter_engine_source_ingress_pp_stat0.BCM88650=INGRESS_IN_LIF
+#counter_engine_source_ingress_pp_stat1.BCM88650=INGRESS_TM
+
+
+# Set the Counter engine resolution
+# SIMPLE_COLOR = green, not green
+# SIMPLE_COLOR_FWD = fwd green, fwd not green (BCM88660_A0 only)
+# SIMPLE_COLOR_DROP = drop green, drop not green (BCM88660_A0 only)
+# FWD_DROP = forwarded, dropped
+# GREEN_NOT_GREEN = fwd grn, drop grn, fwd not grn, drop not grn
+# FULL_COLOR = fwd grn, drop grn, fwd not grn, drop yel, drop red
+# ALL = received
+# FWD = forwarded, DROP = droped (not supported by ARAD_A0)
+# CONFIGURABLE = defined by counter_engine_map_ SOC properties (BCM88660_A0 only)
+counter_engine_statistics_0.BCM88650=FULL_COLOR
+counter_engine_statistics_1.BCM88650=FULL_COLOR
+counter_engine_statistics_2.BCM88650=FULL_COLOR
+counter_engine_statistics_3.BCM88650=FULL_COLOR
+
+# Set the Counter format
+# Options: PACKETS_AND_BYTES / PACKETS / BYTES
+# / MAX_QUEUE_SIZE / LATENCY / PACKETS_AND_PACKETS(supported just in FWD_DROP statistic in BCM88660_A0)
+# If not PACKETS_AND_BYTES or PACKETS_AND_PACKETS, the HW Counter width is 59 bits, thus
+# no background SW operation is performed
+counter_engine_format_0.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_1.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_2.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_3.BCM88650=PACKETS_AND_BYTES
+
+# #enable/disable counter processor background thread (default:1-enable)
+# counter_engine_sampling_interval=1
+
+
+### Configurable mode configuration (BCM88660_A0 only)###
+# counter_engine_statistics_0.BCM88660_A0=CONFIGURABLE
+# counter_engine_map_enable_0.BCM88660_A0=1
+# counter_engine_map_size_0.BCM88660_A0=4
+# counter_engine_map_fwd_green_offset_0.BCM88660_A0=0
+# counter_engine_map_fwd_yellow_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_red_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_black_offset_0.BCM88660_A0=2
+# counter_engine_map_drop_green_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_yellow_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_red_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_black_offset_0.BCM88660_A0=3
+
+### Statistic-Report configuration ###
+# Enable the Statistic-Interface configuration
+# stat_if_enable_<port> - not supported by ARAD_A0
+# stat_if_enable.BCM88650=1
+
+# ## Statistic-Report Properties
+# # Set Statistic-Report interface rate in Mbps
+# # If Value is '0' the statistics port rate will be used. Default: 0.
+# stat_if_rate.BCM88650=0
+# # Set the Statistic-Report mode
+# # Options: BILLING / BILLING_QUEUE_NUMBER (not supported by ARAD_A0)/ QSIZE
+# stat_if_report_mode.BCM88650=QSIZE
+# #Indicate if idle reports must be sent
+# #when the Statistic-report rate is too low
+# stat_if_idle_reports_present.BCM88650=0
+# # Indicate if the reported packet size is the original packet size
+# stat_if_report_original_pkt_size.BCM88650=1
+# #If set then a single ingress-billing report will be generated
+# #for the whole set of the multicast copies
+# stat_if_report_multicast_single_copy=1
+# ## Statistic Packet configurations
+# # Set the Statistic Packet size (Bytes)
+# # Valid values: 65B/126B/248B/492B (Queue-Size), 64B/128B/256B/512B/1024B (Billing).
+# stat_if_pkt_size=64B
+#
+# ## Scrubber configuration
+# # Set the range of VOQs to scrub. Range: 0 - 96K-1.
+# stat_if_scrubber_queue_min.BCM88650=0
+# stat_if_scrubber_queue_max.BCM88650=0
+#
+# # Set the scrubber rate range
+# # If set to 0 (default), the scrubber is disabled. Units: nanoseconds
+# stat_if_scrubber_rate_min.BCM88650=0
+# stat_if_scrubber_rate_max.BCM88650=0
+#
+# # Set the thresholds (thresh_id 0 - 15) defining
+# # occupancy range per resource type:
+# # DRAM Buffers, Buffer descriptors, Buffer descriptors buffers
+# stat_if_scrubber_bdb_th.BCM88650=0
+# stat_if_scrubber_buffer_descr_th.BCM88650=0
+# stat_if_uc_dram_buffer_descr_th.BCM88650=0
+#
+# #Relective report for queue size mode - not supported by ARAD_A0
+# #Reports will be created for queue num range (stat_if_selective_report_queue_min -stat_if_selective_report_queue_max)
+# #Default - all range
+# stat_if_selective_report_queue_min.BCM88650_B0=0
+# stat_if_selective_report_queue_max.BCM88650_B0=98303
+
+### Transaction - DMA configuration ###
+# Time to wait for SCHAN channel response (from CMIC). Units: microseconds.
+
+
+### Counter threads ###
+# # set port bitmap on which statistics collection will be enabled (default all ports)
+# bcm_stat_pbmp.BCM88675=0xfffffffff000000000000000000000000000000000000000000000000000000000003e002
+#
+# # set statistics collection interval in microseconds (default is 1000000)
+# bcm_stat_interval.BCM88675=1000000
+
+### Control optimization of cosq port initializations: speed for memory ###
+runtime_performance_optimize_enable_sched_allocation.BCM88650=1
+runtime_performance_optimize_enable_sched_allocation.BCM88675=1
+
+### static tables initiation (Supported for Jericho) ###
+# Options: 1 - initiating static tables, 0 - doesn't initiate tables (Default Value for PCID/emulation)
+#custom_feature_static_tbl_full_init.BCM88675=1
+#custom_feature_dynamic_tbl_full_init.BCM88675=1
+
+### Interrupts ###
+## Set interrupts global parameters.
+# Options: 1 - Polling interrupt mode, 0 - Line/MSI interrupt mode. Default: 1.
+polled_irq_mode.BCM88650=0
+polled_irq_mode.BCM88675=0
+#  Set the delay in microsecond between the polling, relevant only to Polling mode.  Default: 0x0.
+polled_irq_delay.BCM88650=50000
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling, relevant only to Polling completion mode.
+# SCHAN:
+#schan_intr_enable.0=1
+schan_timeout_usec.BCM88650=300000
+# TDMA
+tdma_intr_enable.BCM88650=1
+tdma_intr_enable.BCM88675=0
+tdma_timeout_usec.BCM88650=5000000
+tdma_timeout_usec.BCM88675=560000000
+# TSLAM
+tslam_intr_enable.BCM88650=1
+tslam_intr_enable.BCM88675=0
+tslam_timeout_usec.BCM88650=5000000
+tslam_timeout_usec.BCM88675=560000000
+# MIIM
+#miim_intr_enable.0=1
+miim_timeout_usec.0=300000
+
+### DRAM configuration ###
+
+# DRAM buffer (Dbuff) size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88650=1024
+ext_ram_dbuff_size.BCM88470=4096
+ext_ram_dbuff_size.BCM88270=4096
+
+# Number of external DRAMs.
+# Allowed values for 88650: 0/2/3/4/6/8.
+# Allowed values for 88660: 0/1/2/3/4/6/8. A value of 1 is permitted only in ONE WAY BYPASS ocb mode.
+# Allowed values for 88675: 0/2/3/41/42/6/8. '41' - configure 4 drams in Single Side mode (A, B, C, D).
+#                                            '42' - configure 4 drams in symmetric mode (A, C, F, H).
+# Value of 0 disables the DRAM.
+ext_ram_present.BCM88650=8
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+ext_ram_present.BCM88470=3
+ext_ram_present.BCM88270=1
+
+### Dram Tuning (Shmoo)
+# 3 = Skip Dram Tuning (Shmoo).
+# 2 = Use Dram saved config Parameters, if no Parameters Perform Shmoo on init. Default option.
+# 1 = Perform Shmoo on init.
+# 0 = Use Dram saved config Parameters, if no Parameters do nothing.
+ddr3_auto_tune.BCM88650=2
+ddr3_auto_tune.BCM88270=2
+ddr3_auto_tune.BCM88470=2
+
+##### DDR Tuning parameters for IL SVK4
+combo28_tune_dq_wr_min_vdl_byte3_ci1.0=0x00000004,0x00000003,0x00000007,0x00000003,0x00000002,0x00000000,0x00000006,0x00000004,
+combo28_tune_dq_rd_min_vdl_byte1_ci2.0=0x00000017,0x00000014,0x00000016,0x00000014,0x00000017,0x00000018,0x00000017,0x00000017,
+combo28_tune_common_macro_reserved_reg_ci0.0=0x00000000,
+combo28_tune_control_regs_reserved_reg_ci1.0=0x00000003,
+combo28_tune_control_regs_read_clock_config_ci0.0=0x00000002,
+combo28_tune_dq_rd_min_vdl_byte2_ci0.0=0x00000018,0x00000017,0x00000017,0x00000018,0x00000017,0x00000014,0x00000015,0x00000017,
+combo28_tune_dq_read_max_vdl_fsm_ci1.0=0x0000004c,0x0000004c,0x0000004c,0x0000004c,
+combo28_tune_aq_u_max_vdl_ctrl_ci1.0=0x00000214,
+combo28_tune_dq_rd_max_vdl_dqsn_ci1.0=0x00000017,0x00000019,0x0000002d,0x0000002d,
+combo28_tune_dq_ren_fifo_config_ci0.0=0x00000090,0x00000090,0x00000090,0x00000090,
+combo28_tune_dq_wr_min_vdl_dbi_ci1.0=0x00000001,0x00000004,0x00000002,0x00000003,
+combo28_tune_aq_u_macro_reserved_reg_ci0.0=0x00000000,
+combo28_tune_dq_rd_min_vdl_edc_ci1.0=0x00000016,0x00000016,0x00000017,0x0000001a,
+combo28_tune_aq_l_max_vdl_addr_ci1.0=0x00000214,
+combo28_tune_dq_wr_max_vdl_data_ci2.0=0x00000238,0x00000406,0x00000247,0x00000416,
+combo28_tune_dq_wr_min_vdl_byte3_ci2.0=0x00000000,0x00000003,0x00000000,0x00000000,0x00000000,0x00000003,0x00000001,0x00000001,
+combo28_tune_common_macro_reserved_reg_ci1.0=0x00000000,
+combo28_tune_control_regs_reserved_reg_ci2.0=0x00000003,
+combo28_tune_control_regs_read_clock_config_ci1.0=0x00000002,
+combo28_tune_dq_rd_min_vdl_byte2_ci1.0=0x00000015,0x00000015,0x00000019,0x00000017,0x00000014,0x00000016,0x00000018,0x00000016,
+combo28_tune_dq_read_max_vdl_fsm_ci2.0=0x0000004d,0x0000004d,0x0000004d,0x0000004d,
+combo28_tune_aq_u_max_vdl_ctrl_ci2.0=0x00000048,
+combo28_tune_dq_rd_max_vdl_dqsn_ci2.0=0x00000023,0x00000022,0x0000002c,0x00000020,
+combo28_tune_dq_ren_fifo_config_ci1.0=0x00000090,0x00000090,0x00000090,0x00000090,
+combo28_tune_dq_wr_min_vdl_dbi_ci2.0=0x00000002,0x00000001,0x00000003,0x00000001,
+combo28_tune_aq_u_macro_reserved_reg_ci1.0=0x00000000,
+combo28_tune_dq_rd_min_vdl_edc_ci2.0=0x00000016,0x00000017,0x00000016,0x00000017,
+combo28_tune_aq_l_max_vdl_addr_ci2.0=0x00000048,
+combo28_tune_control_regs_ren_fifo_central_initializer_ci0.0=0x0000000f,
+combo28_tune_common_macro_reserved_reg_ci2.0=0x00000000,
+combo28_tune_control_regs_read_clock_config_ci2.0=0x00000002,
+combo28_tune_dq_rd_min_vdl_byte2_ci2.0=0x00000018,0x00000016,0x00000015,0x00000014,0x00000015,0x00000015,0x00000014,0x00000015,
+combo28_tune_dq_wr_min_vdl_byte0_ci0.0=0x00000001,0x00000002,0x00000000,0x00000002,0x00000002,0x00000003,0x00000004,0x00000001,
+combo28_tune_dq_ren_fifo_config_ci2.0=0x00000090,0x00000090,0x00000090,0x00000090,
+combo28_tune_dq_rd_min_vdl_byte3_ci0.0=0x00000019,0x00000017,0x0000001a,0x0000001c,0x00000017,0x00000018,0x00000014,0x00000014,
+combo28_tune_aq_u_macro_reserved_reg_ci2.0=0x00000000,
+combo28_tune_control_regs_ren_fifo_central_initializer_ci1.0=0x0000000f,
+combo28_tune_aq_l_max_vdl_ctrl_ci0.0=0x00000201,
+combo28_tune_control_regs_input_shift_ctrl_ci0.0=0x00000070,
+combo28_tune_dq_wr_min_vdl_byte0_ci1.0=0x00000005,0x00000001,0x00000000,0x00000000,0x00000001,0x00000000,0x00000000,0x00000003,
+combo28_tune_dq_rd_min_vdl_byte3_ci1.0=0x00000018,0x00000017,0x0000001c,0x0000001d,0x00000014,0x00000017,0x0000001e,0x0000001d,
+combo28_tune_control_regs_ren_fifo_central_initializer_ci2.0=0x0000000f,
+combo28_tune_dq_rd_max_vdl_dqsp_ci0.0=0x00000018,0x00000019,0x00000025,0x0000002b,
+combo28_tune_aq_l_max_vdl_ctrl_ci1.0=0x00000214,
+combo28_tune_control_regs_input_shift_ctrl_ci1.0=0x00000070,
+combo28_tune_dq_wr_min_vdl_byte0_ci2.0=0x00000000,0x00000005,0x00000003,0x00000003,0x00000003,0x00000003,0x00000003,0x00000002,
+combo28_tune_dq_wr_min_vdl_edc_ci0.0=0x00000000,0x00000000,0x00000000,0x00000000,
+combo28_tune_dq_rd_min_vdl_byte3_ci2.0=0x00000015,0x00000017,0x00000014,0x00000015,0x00000016,0x00000018,0x00000018,0x00000019,
+combo28_tune_dq_wr_min_vdl_byte1_ci0.0=0x00000002,0x00000002,0x00000002,0x00000003,0x00000002,0x00000001,0x00000002,0x00000000,
+combo28_tune_control_regs_edcen_fifo_central_init_ci0.0=0x00000000,
+combo28_tune_dq_macro_reserved_reg_ci0.0=0x00000026,0x00000026,0x00000025,0x00000026,
+combo28_tune_dq_rd_max_vdl_dqsp_ci1.0=0x00000017,0x00000019,0x0000002d,0x0000002d,
+combo28_tune_aq_l_max_vdl_ctrl_ci2.0=0x00000048,
+combo28_tune_control_regs_input_shift_ctrl_ci2.0=0x00000070,
+combo28_tune_dq_rd_min_vdl_dbi_ci0.0=0x00000016,0x00000017,0x00000017,0x00000018,
+combo28_tune_dq_wr_min_vdl_edc_ci1.0=0x00000000,0x00000000,0x00000000,0x00000000,
+combo28_tune_dq_wr_min_vdl_byte1_ci1.0=0x00000006,0x00000007,0x00000005,0x00000005,0x00000000,0x00000001,0x00000007,0x00000005,
+combo28_tune_dq_edcen_fifo_config_ci0.0=0x00000080,0x00000080,0x00000080,0x00000080,
+combo28_tune_control_regs_edcen_fifo_central_init_ci1.0=0x00000000,
+combo28_tune_dq_vref_dac_config_ci0.0=0x00760000,0x00740000,0x00800000,0x007c0000,
+combo28_tune_dq_macro_reserved_reg_ci1.0=0x00000026,0x0000002a,0x00000028,0x00000029,
+combo28_tune_dq_rd_max_vdl_dqsp_ci2.0=0x00000023,0x00000022,0x0000002c,0x00000020,
+combo28_tune_dq_rd_min_vdl_byte0_ci0.0=0x00000016,0x00000014,0x00000014,0x00000016,0x00000015,0x00000015,0x00000016,0x00000016,
+combo28_tune_dq_rd_min_vdl_dbi_ci1.0=0x00000016,0x00000016,0x00000017,0x0000001a,
+combo28_tune_aq_u_max_vdl_addr_ci0.0=0x00000201,
+combo28_tune_dq_wr_max_vdl_dqs_ci0.0=0x00000440,0x0000044a,0x00000422,0x00000430,
+combo28_tune_dq_wr_min_vdl_edc_ci2.0=0x00000000,0x00000000,0x00000000,0x00000000,
+combo28_tune_dq_wr_min_vdl_byte1_ci2.0=0x00000003,0x00000000,0x00000002,0x00000001,0x00000002,0x00000001,0x00000004,0x00000001,
+combo28_tune_dq_edcen_fifo_config_ci1.0=0x00000080,0x00000080,0x00000080,0x00000080,
+combo28_tune_control_regs_edcen_fifo_central_init_ci2.0=0x00000000,
+combo28_tune_dq_vref_dac_config_ci1.0=0x007e0000,0x007a0000,0x00820000,0x00820000,
+combo28_tune_dq_macro_reserved_reg_ci2.0=0x00000028,0x00000028,0x0000002a,0x0000002b,
+combo28_tune_dq_wr_min_vdl_byte2_ci0.0=0x00000001,0x00000000,0x00000003,0x00000002,0x00000005,0x00000005,0x00000003,0x00000005,
+combo28_tune_dq_rd_min_vdl_byte0_ci1.0=0x00000015,0x00000017,0x00000017,0x00000017,0x00000017,0x00000015,0x00000014,0x00000015,
+combo28_tune_dq_rd_min_vdl_dbi_ci2.0=0x00000016,0x00000017,0x00000016,0x00000017,
+combo28_tune_control_regs_shared_vref_dac_config_ci0.0=0x00920000,
+combo28_tune_aq_u_max_vdl_addr_ci1.0=0x00000214,
+combo28_tune_dq_wr_max_vdl_dqs_ci1.0=0x00000440,0x00000446,0x0000042d,0x00000434,
+combo28_tune_dq_edcen_fifo_config_ci2.0=0x00000080,0x00000080,0x00000080,0x00000080,
+combo28_tune_aq_l_macro_reserved_reg_ci0.0=0x00000000,
+combo28_tune_dq_vref_dac_config_ci2.0=0x00840000,0x007e0000,0x008a0000,0x00820000,
+combo28_tune_dq_wr_min_vdl_byte2_ci1.0=0x00000000,0x00000001,0x00000002,0x00000004,0x00000003,0x00000000,0x00000004,0x00000007,
+combo28_tune_dq_rd_min_vdl_byte0_ci2.0=0x00000014,0x00000015,0x00000015,0x00000014,0x00000016,0x00000017,0x00000015,0x00000016,
+combo28_tune_control_regs_shared_vref_dac_config_ci1.0=0x00920000,
+combo28_tune_aq_u_max_vdl_addr_ci2.0=0x00000048,
+combo28_tune_dq_wr_max_vdl_dqs_ci2.0=0x00000424,0x00000435,0x0000043c,0x00000444,
+combo28_tune_dq_rd_min_vdl_byte1_ci0.0=0x00000017,0x00000017,0x00000018,0x00000018,0x00000014,0x00000015,0x00000015,0x00000015,
+combo28_tune_aq_l_macro_reserved_reg_ci1.0=0x00000000,
+combo28_tune_dq_wr_min_vdl_byte2_ci2.0=0x00000004,0x00000000,0x00000004,0x00000005,0x00000002,0x00000003,0x00000004,0x00000004,
+combo28_tune_dq_wr_max_vdl_data_ci0.0=0x00000416,0x00000428,0x00000232,0x00000241,
+combo28_tune_control_regs_shared_vref_dac_config_ci2.0=0x00920000,
+combo28_tune_dq_wr_min_vdl_byte3_ci0.0=0x00000005,0x00000005,0x00000005,0x00000004,0x00000003,0x00000003,0x00000003,0x00000000,
+combo28_tune_dq_rd_min_vdl_byte1_ci1.0=0x00000018,0x00000018,0x00000018,0x00000014,0x00000014,0x00000014,0x00000018,0x00000014,
+combo28_tune_aq_l_macro_reserved_reg_ci2.0=0x00000000,
+combo28_tune_control_regs_reserved_reg_ci0.0=0x00000003,
+combo28_tune_dq_read_max_vdl_fsm_ci0.0=0x0000004b,0x0000004b,0x0000004b,0x0000004b,
+combo28_tune_aq_u_max_vdl_ctrl_ci0.0=0x00000201,
+combo28_tune_dq_rd_max_vdl_dqsn_ci0.0=0x00000018,0x00000019,0x00000025,0x0000002b,
+combo28_tune_dq_wr_min_vdl_dbi_ci0.0=0x00000001,0x00000001,0x00000003,0x00000003,
+combo28_tune_dq_rd_min_vdl_edc_ci0.0=0x00000016,0x00000017,0x00000017,0x00000018,
+combo28_tune_aq_l_max_vdl_addr_ci0.0=0x00000201,
+combo28_tune_dq_wr_max_vdl_data_ci1.0=0x00000414,0x0000041e,0x00000234,0x00000245,
+
+### Enable BIST
+# Run Dram BIST on initialization, if BIST fail the initialization will fail. Defult: 1.
+# bist_enable_dram.BCM88650=1
+bist_enable_dram.BCM88270=1
+bist_enable_dram.BCM88470=1
+
+### Example for Dram Saved config Parameters.
+## This example is for ci=14 (Dram=7).
+#ddr3_tune_addrc_ci14=0x000000ae
+#ddr3_tune_wr_dq_wl1_ci14=0x92929292,0x92929292,0x92929292,0x92929292
+#ddr3_tune_wr_dq_wl0_ci14=0x93939393,0x93939393,0x92929292,0x92929292
+#ddr3_tune_wr_dq_ci14=0x80808080
+#ddr3_tune_vref_ci14=0x000007df
+#ddr3_tune_rd_dqs_ci14=0x96969191,0x90909191
+#ddr3_tune_rd_dq_wl1_rn_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rn_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_dq_wl1_rp_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rp_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_en_ci14=0x009d9e9d,0x00a2a3a1
+#ddr3_tune_rd_data_dly_ci14=0x00000505
+
+
+### Dram type: Select ONLY ONE of the following DRAM types, to configure all dram related parameteres per type.
+
+# Dram Type for Arad:
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_933=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_800=1
+#dram_type_DDR3_MICRON_MT41J256M16_4GBIT_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_933=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_800=1
+#dram_type_DDR3_MICRON_MT42J64M16LA_15E_667=1
+#dram_type_DDR3_SAMSUNG_K4B4G1646B_4GBIT_1066=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_933=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_800=1
+
+# Dram Type for Jericho:
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#dram_type_DDR4_MICRON_Y4016AABG_JD_F_4GBIT=1
+dram_type_DDR4_MICRON_MT40A256M16HA_083EA_4GBIT=1
+#dram_type_DDR4_HYNIX_H5AN4G6NMFR_VJC_4GBIT=1
+#dram_type_GDDR5_SAMSUNG_K4G20325FD_2GBIT=1
+#dram_type_GDDR5_SAMSUNG_K4G41325FC_4GBIT=1
+#dram_type_GDDR5_MICRON_EDW4032CABG_4GBIT=1
+#dram_type_GDDR5_HYNIX_H5GC4H24MFR_T2C_4GBIT=1
+
+# Dram Type for Ardon:
+#dram_type_DDR4_MICRON_EDY4016AABG_DRFR_4GBIT=1
+
+# DRAM frequency
+ext_ram_freq.BCM88675=1600
+
+### Setting dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066 Parameters as Default:
+## All other dram types parameter resides in arad.soc. choosing another Dram Type will override the following parameters.
+ext_ram_t_rrd=6000
+ext_ram_columns=1024
+ext_ram_banks=8
+ext_ram_ap_bit_pos=10
+ext_ram_burst_size=32
+ext_ram_t_ref=3900000
+ext_ram_t_wr=15000
+ext_ram_t_wtr=7500
+ext_ram_t_rtp=7500
+ext_ram_freq=1066
+ext_ram_rows=16384
+ext_ram_jedec=29
+ext_ram_t_rc=46090
+ext_ram_t_rcd_rd=13090
+ext_ram_t_rcd_wr=13090
+ext_ram_t_rp=13090
+ext_ram_t_rfc=160000
+ext_ram_t_ras=33000
+ext_ram_c_wr_latency=10
+ext_ram_t_faw=35000
+ext_ram_c_cas_latency=14
+ddr3_mem_grade=0x141414
+
+## address or bank address swap example
+#swaps are found in bcm88xxx_board.soc
+#ext_ram_addr_bank_swap_dramX_bitY=M
+
+## dq swap example
+#swaps are found in bcm88xxx_board.soc
+#bit swap example:
+#ext_ram_dq_swap_dramX_byteY_bitZ=M
+#byte swap example:
+#ext_ram_dq_swap_dramX_byteY=M
+
+## Dram Gear down mode. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+ext_ram_gear_down_mode.BCM88675=0
+
+## Alert_n de-assertion period above which error is considered parity error
+#ext_ram_alert_n_period_thrs.BCM88675=20
+
+## Dram Address bus inversion. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_abi.BCM88675=0
+
+## Data bus inversion on write/read direction. Valid values: 0 - Disable, 1 - Enable. Default: 0x0.
+## those socs are configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_write_dbi.BCM88675=0
+#ext_ram_read_dbi.BCM88675=0
+
+## Enable write/read CRC (DDR4 does not support read CRC). Default: 0x0.
+## those socs are configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_write_crc.BCM88675=1
+#ext_ram_read_crc.BCM88675=0
+
+## Command parity latency. Valid values: 0 - Disable, 4,5 or 6 - Valid values. Default: 0x0.
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_cmd_par_latency.BCM88675=6
+
+# DRAM pre-configurations according to config variables which defines
+# Dram Type. BCM88650 supports only DDR3.
+# Dram Type. BCM88675 supports DDR4 and GDDR5.
+ext_ram_type.BCM88650=DDR3
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_type.BCM88675=DDR4
+
+# Total Dram Size (MBytes)
+# For 8 drams interfaces, 2 channel each, Each channel 2Gbit Dram. the total DRAM size is 32GBits=4000MBytes.
+ext_ram_total_size.BCM88650=4000
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_total_size.BCM88675=8000
+
+# Total buffer size allocated for User buffer. Units: Mbytes. Default: '0x0'.
+# Supported suffix:
+#       dram - the buffer size will be subtracted from the DRAM size available for packet memory.
+#user_buffer_size=0
+#user_buffer_size_dram=50
+
+# DRAM ClamShell (interface swap its HW PIN pairs during init.)
+# Note: Only one of DRAMs can have its PIN swapped
+# Valid values: 0/1
+#dram0_clamshell_enable.BCM88650=1
+#dram1_clamshell_enable.BCM88650=1
+
+# DRAM maximum number of crc error per buffer, buffer deleted by interrupt application.
+#dram_crc_del_buffer_max_reclaims=0
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+## If set, always configures synthesizers, even if the configured rate is equal to
+## their nominal rate. Can be disabled to speedup bringup time (keep in mind that if
+## disabled, changing a synt to a non-nominal freq and than back to nominal will not
+## work
+#synt_over.BCM88650=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88650=100000000
+synt_ddr.BCM88650=125000000
+synt_phy.BCM88650=156250000
+# in Jericho, this freq is used only for the core synth
+synth_dram_freq.BCM88650=25
+
+#Configure the reference clock frequencies for NIF and Fabric SerDes
+# Options:  0 - 125MHz, 1 - 156.25MHz, -1 - Disable
+serdes_nif_clk_freq.BCM88650=1
+serdes_fabric_clk_freq.BCM88650=1
+#serdes_nif_clk_freq.BCM88270=-1
+#serdes_fabric_clk_freq.BCM88270=-1
+serdes_nif_clk_freq.BCM8206=-1
+serdes_fabric_clk_freq.BCM8206=-1
+#serdes_nif_clk_freq_out0.BCM88675=1
+#serdes_nif_clk_freq_out1.BCM88675=1
+#serdes_nif_clk_freq_out2.BCM88675=1
+#serdes_nif_clk_freq_in0.BCM88675=1
+#serdes_nif_clk_freq_in1.BCM88675=1
+#serdes_nif_clk_freq_in2.BCM88675=1
+#serdes_fabric_clk_freq_out0.BCM88675=1
+#serdes_fabric_clk_freq_out1.BCM88675=1
+#serdes_fabric_clk_freq_in0.BCM88675=1
+#serdes_fabric_clk_freq_in1.BCM88675=1
+
+
+# IEEE 1588 / Broadsync -
+# configure clock :
+#  DPLL mode/lock: 0 - eci ts pll clk disabled, 1 - configure eci ts pll clk
+#  DPLL phase/freq. Default initial: lo = 0x40000000, hi = 0x10000000.
+#phy_1588_dpll_frequency_lock.BCM88650=1
+#phy_1588_dpll_phase_initial_lo.BCM88650=0x40000000
+#phy_1588_dpll_phase_initial_hi.BCM88650=0x10000000
+# IEEE 1588 -
+# port external MAC
+#  indication whether external MAC exists or not.
+#  0: 1588 external MAC does not exist
+#  1: 1588 external MAC exists
+#  the external MAC substracts the RX time from the correction field
+#  and adds the TX time to the correction field.
+#ext_1588_mac_enable_14.BCM88650=1
+#  If set, 48 bits stamping is used for 1588 packets. otherwise 32 bit stamping is used
+#  0: 1588 32b stamping (Default)
+#  1: 1588 48b stamping
+#bcm88660_1588_48b_stamping_enable.BCM88660=1
+
+## Trill configurations
+# Trill mode: 0 (disabled) / 1 (coarse-grained) / 2 (fine-grained)
+#trill_mode.BCM88650=1
+
+# Trill multicast prunning mode:
+# 0: no prunning - vsi is not part of the key
+# 1: VSI prunning: Key is dist-tree,esadit-bit,VSI.
+trill_mc_prune_mode.BCM88650=0
+
+# Enable SA authentication
+#sa_auth_enabled=1
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88650=0
+logical_port_drop.BCM88650=1
+
+#logical_port_mim_in.BCM88650=2
+#logical_port_mim_out.BCM88650=4096
+
+# Enable EVB application
+#evb_enable=1
+
+# Enable Flexible QinQ application
+#vlan_translation_match_ipv4=1
+
+# Enable presel mgmt advance mode
+#field_presel_mgmt_advanced_mode=1
+
+# Enable ITMH programmable mode
+# ITMH processing fully programmable (not fixed) by using the FP APIs. 
+# In this mode ITMH processing uses the TCAM/direct table for TM programs lookup, in same manner as Ethernet frames.
+itmh_programmable_mode_enable.BCM88675=1
+itmh_programmable_mode_enable.BCM88470=1
+itmh_programmable_mode_enable.BCM88270=1
+itmh_programmable_mode_enable.BCM88680=1
+
+
+
+# Prepend tag to be 4 bytes or 8 bytes. Default: 4B.
+# Applicable only from ARAD+
+#prepend_tag_bytes=4B
+
+# The Prepend Tag is located at (12 + 2*offset) bytes from the start of the packet.
+# Range: 0-7. Default: 0
+#prepend_tag_offset=0
+
+# Enable ARP (next hop mac extension) feature
+bcm886xx_next_hop_mac_extension_enable.BCM88650=1
+
+# Set VLAN translate mode.
+# 0: normal
+# 1: advanced mode. Enable vlan edit settings with enhanced user control
+#bcm886xx_vlan_translate_mode=0
+
+# Set MPLS termination database mode
+# Set MPLS databases location for each MPLS namespace (L1,L2,L3)
+#bcm886xx_mpls_termination_database_mode=0
+
+# Enable , Disable MPLS indexed.
+# MPLS termination with known label stack location.
+# Must be enabled in case device supports more than 2 MPLS label terminations (L1,L2,L3)
+#mpls_termination_label_index_enable=1
+
+# Enable FastReRoute labels in device.
+#fast_reroute_labels_enable=0
+
+# Enable MPLS Context specific. Upstream label assignment in device.
+#mpls_context_specific_label_enable=0
+
+# MPLS context.
+# Can be global, per port , per interface or per port,interface.
+#mpls_context=global
+
+# MPLS TP MC reserved mac address (01-00-5E-90-00-00).
+# If set device will support My-MAC termination of reserved MC Ethernet
+#mpls_tp_mymac_reserved_address=0
+
+# MPLS ELI enable disable
+mpls_entropy_label_indicator_enable=0
+
+#########################################
+##cfg for BCM88202 - Ardon
+#########################################
+
+#Core clock and system reference clock (KHz)
+core_clock_speed_khz.BCM88202=450000
+system_ref_core_clock_khz.BCM88202=1200000
+
+## Set TM as device mode
+fap_device_mode.BCM88202=TM
+
+## Set CPU ports header type
+tm_port_header_type_in_0.BCM88202=TM
+tm_port_header_type_out_0.BCM88202=TM
+tm_port_header_type_in_200.BCM88202=TM
+tm_port_header_type_out_200.BCM88202=TM
+tm_port_header_type_in_201.BCM88202=TM
+tm_port_header_type_out_201.BCM88202=TM
+tm_port_header_type_in_202.BCM88202=TM
+tm_port_header_type_out_202.BCM88202=TM
+tm_port_header_type_in_203.BCM88202=TM
+tm_port_header_type_out_203.BCM88202=TM
+
+##### Application configuration
+### Default SDK Application
+ucode_port_1.BCM88202=TM_INTERNAL_PKT.0
+ucode_port_13.BCM88202=TM_INTERNAL_PKT.1
+ucode_port_14.BCM88202=TM_INTERNAL_PKT.2
+ucode_port_15.BCM88202=TM_INTERNAL_PKT.3
+ucode_port_16.BCM88202=TM_INTERNAL_PKT.4
+ucode_port_17.BCM88202=TM_INTERNAL_PKT.5
+
+### PortOpriority (additonal ports can be added)
+#diag_cosq_disable.BCM88202=1
+#ucode_port_1.BCM88202=IGNORE
+#ucode_port_13.BCM88202=IGNORE
+#ucode_port_14.BCM88202=IGNORE
+#ucode_port_15.BCM88202=IGNORE
+#ucode_port_16.BCM88202=IGNORE
+#ucode_port_17.BCM88202=IGNORE
+#ucode_port_1.BCM88202=TM_INTERNAL_PKT.0
+#ucode_port_2.BCM88202=TM_INTERNAL_PKT.1
+#ucode_port_3.BCM88202=TM_INTERNAL_PKT.2
+#ucode_port_4.BCM88202=TM_INTERNAL_PKT.3
+#ucode_port_5.BCM88202=TM_INTERNAL_PKT.4
+#ucode_port_6.BCM88202=TM_INTERNAL_PKT.5
+#ucode_port_7.BCM88202=TM_INTERNAL_PKT.6
+#ucode_port_8.BCM88202=TM_INTERNAL_PKT.7
+#ucode_port_9.BCM88202=TM_INTERNAL_PKT.8
+#ucode_port_10.BCM88202=TM_INTERNAL_PKT.9
+#ucode_port_11.BCM88202=TM_INTERNAL_PKT.10
+#ucode_port_12.BCM88202=TM_INTERNAL_PKT.11
+#ucode_port_13.BCM88202=TM_INTERNAL_PKT.12
+#ucode_port_14.BCM88202=TM_INTERNAL_PKT.13
+#ucode_port_15.BCM88202=TM_INTERNAL_PKT.14
+#ucode_port_16.BCM88202=TM_INTERNAL_PKT.15
+#ucode_port_17.BCM88202=TM_INTERNAL_PKT.16
+#ucode_port_18.BCM88202=TM_INTERNAL_PKT.17
+#ucode_port_19.BCM88202=TM_INTERNAL_PKT.18
+#ucode_port_20.BCM88202=TM_INTERNAL_PKT.19
+#ucode_port_21.BCM88202=TM_INTERNAL_PKT.20
+#ucode_port_22.BCM88202=TM_INTERNAL_PKT.21
+#ucode_port_23.BCM88202=TM_INTERNAL_PKT.22
+#ucode_port_24.BCM88202=TM_INTERNAL_PKT.23
+#ucode_port_25.BCM88202=TM_INTERNAL_PKT.24
+
+#dtm_flow_nof_remote_cores_region_1.BCM88202=1
+#dtm_flow_nof_remote_cores_region_2.BCM88202=1
+#dtm_flow_nof_remote_cores_region_3.BCM88202=1
+#dtm_flow_nof_remote_cores_region_4.BCM88202=1
+#dtm_flow_nof_remote_cores_region_5.BCM88202=1
+#dtm_flow_nof_remote_cores_region_6.BCM88202=1
+#dtm_flow_nof_remote_cores_region_7.BCM88202=1
+#dtm_flow_nof_remote_cores_region_8.BCM88202=1
+#dtm_flow_nof_remote_cores_region_9.BCM88202=1
+#dtm_flow_nof_remote_cores_region_10.BCM88202=1
+
+### PriorityOPort
+#diag_cosq_disable.BCM88202=1
+#stack_enable.BCM88202=0
+#ucode_port_17.BCM88202=IGNORE
+#ucode_port_16.BCM88202=IGNORE
+#ucode_port_15.BCM88202=IGNORE
+#ucode_port_14.BCM88202=IGNORE
+#ucode_port_13.BCM88202=IGNORE
+#ucode_port_1.BCM88202=TM_INTERNAL_PKT.0
+
+## Credit worth resolution (Fix the Interface rate)
+credit_worth_resolution.BCM88202=medium
+
+### Interrupts
+polled_irq_mode.BCM88202=1
+
+## To use MC-ID in the range of < 255
+egress_multicast_direct_bitmap_max.BCM88202=255
+
+### Flow Control
+## Enable Flow Control to CL SCH. Relevant only to Priority Over Port application
+## Valid values: 1 - Enable, 0 - Disable. Default: 0x0.
+custom_feature_cl_scheduler_fc.BCM88202=1
+
+## Valid values: 1 - Enable, 0 - Disable. Default: 0x0.
+#custom_feature_high_vsi_fp.BCM88660=0
+
+## Use lower CL. Ardon FC is mapped to CL 0-255.
+dtm_flow_mapping_mode_region_65.BCM88202=1
+dtm_flow_mapping_mode_region_66.BCM88202=1
+
+### Statistic-Report Properties
+stat_if_enable.BCM88202=1
+stat_if_rate.BCM88202=10000
+stat_if_pkt_size.BCM88202=126B
+## Set the Statistic-Report mode
+stat_if_report_mode.BCM88202=QSIZE
+## Enable statistics reports on EnQueue. Valid valued: 0/1. Default: '1'.
+stat_if_report_enqueue_enable.BCM88202=1
+## Enable statistics reports on DeQueue. Valid valued: 0/1. Default: '1'.
+stat_if_report_dequeue_enable.BCM88202=1
+
+## Disable removed features
+phy_1588_dpll_frequency_lock.BCM88202=0
+low_power_nif_mac.BCM88202=0
+low_power_fabric_mac.BCM88202=0
+custom_feature_nif_recovery_enable.BCM88202=0
+phy_null.BCM88202=0
+
+## Disable counter thread
+bcm_stat_interval.BCM88202=0
+#bcm_stat_sync_timeout.BCM88202=0xfffffff
+
+### EMUL changes
+#diag_emulator_partial_init.BCM88202=1
+#schan_timeout_usec.BCM88202=0x7fffffff
+#tdma_timeout_usec.BCM88202=0x7fffffff
+#tslam_timeout_usec.BCM88202=0x7fffffff
+#phy_null.BCM88202=0
+
+### Disable DMA
+#tdma_timeout_usec.BCM88202=0
+#tslam_timeout_usec.BCM88202=0
+#table_dma_enable.BCM88202=0
+#tslam_dma_enable.BCM88202=0
+
+### Dram setup
+# Number of external DRAMs.
+# Allowed values for 88202: 0 / 1 (Dram D) / 2 (Dram's C, D) / 3 (Dram's B, C, D) / 4 (Dram's A, B, C, D) /
+ext_ram_present.BCM88202=0
+
+### Total size of ram
+ext_ram_total_size.BCM88202=2000
+
+### OCB
+bcm886xx_ocb_databuffer_size.BCM88202=1024
+
+# DRAM frequency (DQ/2)
+ext_ram_freq.BCM88202=1200
+
+# Dram Type. Ardon supports only DDR4.
+ext_ram_type.BCM88202=DDR4
+
+### Dram Features
+
+## Dram Gear down mode. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+#ext_ram_gear_down_mode.BCM88202=1
+
+## Alert_n de-assertion period above which error is considered parity error
+#ext_ram_alert_n_period_thrs.BCM88202=0
+
+## Dram Address bus inversion. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+ext_ram_abi.BCM88202=0
+
+## Data bus inversion on write/read direction. Valid values: 0 - Disable, 1 - Enable. Default: 0x0.
+ext_ram_write_dbi.BCM88202=0
+ext_ram_read_dbi.BCM88202=0
+
+## Enable write/read CRC (DDR4 does not support read CRC). Default: 0x0.
+#ext_ram_write_crc=.BCM882021
+#ext_ram_read_crc=.BCM882021
+
+## Command parity latency. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+ext_ram_cmd_par_latency.BCM88202=6
+
+## DRAM ClamShell (interface swap its HW PIN pairs during init.)
+# Note: Only one of DRAMs can have its PIN swapped). Valid values: 0/1.
+dram1_clamshell_enable_0.BCM88202=1
+dram1_clamshell_enable_1.BCM88202=1
+dram1_clamshell_enable_2.BCM88202=1
+dram1_clamshell_enable_3.BCM88202=1
+
+## Dram DQ Swap.
+## Format: ext_ram_dq_swap_dramX_byteY_bitZ=M. Means, In dram X, Byte Y swap DQ Z and M. Default: No swapping.
+#ext_ram_dq_swap_dram1_byte2_bit3.BCM88202=4
+#ext_ram_dq_swap_dram4_byte3_bit2.BCM88202=1
+
+### Dram Tuning (Shmoo)
+ddr3_auto_tune.BCM88202=2
+
+### Enable BIST
+# Run Dram BIST on initialization, if BIST fail the initialization will fail. Default: 1.
+bist_enable_dram.BCM88202=1
+
+### Fabric
+## Enable fabric links
+serdes_qrtt_active_0.BCM88202=1
+serdes_qrtt_active_1.BCM88202=1
+serdes_qrtt_active_2.BCM88202=1
+serdes_qrtt_active_3.BCM88202=1
+
+## Firmware Load Method
+load_firmware.BCM88202=2
+
+#SFI speed rate
+port_init_speed_sfi.BCM88202=11500
+
+#LC PLL in. Default: 156.25MHz.
+#xgxs_lcpll_xtal_refclk=125
+
+#########################################
+##cfg for BCM88640_A0 - Petra
+#########################################
+
+force_clk_m_n_divisors_zero_nif0.BCM88640_A0=0
+force_clk_m_n_divisors_zero_fabric0.BCM88640_A0=1
+force_clk_m_n_divisors_zero_comb0.BCM88640_A0=0
+
+combo_ref_clock.BCM88640=312500
+
+nif_ref_clock.BCM88640_A0=312500
+
+# Use variable cell size
+system_cell_format.BCM88640_A0=VCS128
+
+# Core clock speed (MHz)
+core_clock_speed.BCM88640_A0=300
+
+# Map bcm local port to CPU/NIF interfaces
+ucode_port_0.BCM88640_A0=CPU.0
+ucode_port_73.BCM88640_A0=CPU.1
+ucode_port_74.BCM88640_A0=CPU.2
+ucode_port_75.BCM88640_A0=CPU.3
+ucode_port_76.BCM88640_A0=CPU.4
+ucode_port_77.BCM88640_A0=CPU.5
+ucode_port_78.BCM88640_A0=CPU.6
+
+# Interlaken ports basic configuration (temporary).
+# This configuration replaces the above XAUI/RXAUI ports config
+# The following PB design constraint is not enforced in SW, so must be taken
+# care of here, when mapping ports to interfaces:
+#   If using ilkn0, port 1 (if used) must be mapped to ilkn0
+#   If using ilkn1, port 2 (if used) must be mapped to ilkn1
+#   Note that in our default mapping, port 2 is mapped to RXAUI 6, thus won't
+#   work. If one wants to use front panel port 2 with ilkn1, he should be map
+#   RAXUI6 to a port != 2.
+#ilkn_num_lanes_0.BCM88640_A0=12
+#ucode_port_1.BCM88640_A0=ILKN0.0
+#ucode_port_2.BCM88640_A0=ILKN0.1
+#ucode_port_3.BCM88640_A0=ILKN0.2
+#ilkn_num_lanes_1.BCM88640_A0=12
+#ucode_port_4.BCM88640_A0=RXAUI6
+#ucode_port_5.BCM88640_A0=ILKN1.0
+#ucode_port_6.BCM88640_A0=ILKN1.1
+#ucode_port_7.BCM88640_A0=ILKN1.2
+
+# Default header type is derived from fap_device_mode: If fap_device_mode is
+# PP, default header type is ETH. Otherwise, defualt header type is TM.
+# Header type per port can be overriden.
+# All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/INJECTED
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88640_A0=TM
+tm_port_header_type_in_0.BCM88640_A0=TM
+tm_port_header_type_out_0.BCM88640_A0=CPU
+tm_port_header_type_73.BCM88640_A0=TM
+tm_port_header_type_74.BCM88640_A0=TM
+tm_port_header_type_75.BCM88640_A0=TM
+tm_port_header_type_76.BCM88640_A0=TM
+tm_port_header_type_77.BCM88640_A0=TM
+tm_port_header_type_78.BCM88640_A0=TM
+# recycling port
+tm_port_header_type_40.BCM88640_A0=RAW
+ucode_port_40.BCM88640_A0=RCY.0
+
+# Enable ERP and OLP ports
+num_erp_tm_ports.BCM88640_A0=1
+num_olp_tm_ports.BCM88640_A0=1
+num_recycle_tm_ports.BCM88640_A0=1
+
+# Dram configuration
+# 600 Mhz
+ext_ram_pll_r.BCM88640_A0=4
+ext_ram_pll_f.BCM88640_A0=47
+ext_ram_pll_q.BCM88640_A0=1
+ext_ram_freq.BCM88640_A0=600
+
+# Dbuff size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88640_A0=1024
+
+# Number of external DRAMs.
+# Allowed values for 88x4x: 0/2/3/4/6.
+# Allowed values for 88650: 0/2/3/4/6/8.
+# ext_ram_total_size below assumed this value is 6 for 88x4x and 8 for
+ext_ram_present.BCM88640_A0=6
+
+# Dram type: Select ONLY ONE of the following DRAM types, to configure all dram
+# related parameteres per type.
+# Dram Type for Pb:
+#dram_type_DDR3_MICRON_MT41J64M16_15E.BCM88640_A0=1
+#dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600.BCM88640_A0=1
+#dram_type_GDDR3_SAMSUNG_K4J52324QE.BCM88640_A0=1
+dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G.BCM88640_A0=1
+
+# QDR configuration
+# Parity. Allowed values: PARITY/ECC.
+ext_qdr_protection_type.BCM88640_A0=PARITY
+ext_qdr_size_mbit.BCM88640_A0=72
+#QDR type: QDR/QDR2P/QDR3/NONE.
+ext_qdr_type.BCM88640_A0=QDR
+
+# QDR can use the core clock, or using it's own pll. Current example is for 250MHz pll (if used).
+# QDR using own pll configuration
+#ext_qdr_use_core_clock_freq.BCM88640_A0=0
+#ext_qdr_pll_m.BCM88640_A0=4
+#ext_qdr_pll_n.BCM88640_A0=4
+#ext_qdr_pll_p.BCM88640_A0=0
+
+# QDR using core clock
+ext_qdr_use_core_clock_freq.BCM88640_A0=1
+
+#Configure MDIO. If parameter is not defined, MDIO is disabled.
+mdio_clock_freq_khz.BCM88640_A0=1000
+
+# Streaming interface configuration
+streaming_if_enable_timeoutcnt.BCM88640_A0=1
+streaming_if_timeout_prd.BCM88640_A0=70
+streaming_if_quiet_mode.BCM88640_A0=0
+streaming_if_discard_bad_parity.BCM88640_A0=0
+
+# maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88640_A0=0
+
+# multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_max.BCM88640_A0=4095
+
+# configure flow mapping base to 0
+flow_mapping_queue_base.BCM88640_A0=0
+
+dtm_flow_mapping_mode_region_25.BCM88640_A0=0
+dtm_flow_mapping_mode_region_26.BCM88640_A0=0
+dtm_flow_mapping_mode_region_27.BCM88640_A0=0
+dtm_flow_mapping_mode_region_28.BCM88640_A0=0
+dtm_flow_mapping_mode_region_29.BCM88640_A0=0
+dtm_flow_mapping_mode_region_30.BCM88640_A0=0
+dtm_flow_mapping_mode_region_31.BCM88640_A0=0
+dtm_flow_mapping_mode_region_32.BCM88640_A0=0
+dtm_flow_mapping_mode_region_33.BCM88640_A0=1
+dtm_flow_mapping_mode_region_34.BCM88640_A0=1
+dtm_flow_mapping_mode_region_35.BCM88640_A0=1
+dtm_flow_mapping_mode_region_36.BCM88640_A0=1
+dtm_flow_mapping_mode_region_37.BCM88640_A0=1
+dtm_flow_mapping_mode_region_38.BCM88640_A0=1
+dtm_flow_mapping_mode_region_39.BCM88640_A0=1
+dtm_flow_mapping_mode_region_40.BCM88640_A0=1
+dtm_flow_mapping_mode_region_41.BCM88640_A0=1
+dtm_flow_mapping_mode_region_42.BCM88640_A0=2
+dtm_flow_mapping_mode_region_43.BCM88640_A0=2
+dtm_flow_mapping_mode_region_44.BCM88640_A0=2
+dtm_flow_mapping_mode_region_45.BCM88640_A0=2
+dtm_flow_mapping_mode_region_46.BCM88640_A0=2
+dtm_flow_mapping_mode_region_47.BCM88640_A0=2
+dtm_flow_mapping_mode_region_48.BCM88640_A0=2
+dtm_flow_mapping_mode_region_49.BCM88640_A0=2
+dtm_flow_mapping_mode_region_50.BCM88640_A0=2
+dtm_flow_mapping_mode_region_51.BCM88640_A0=2
+dtm_flow_mapping_mode_region_52.BCM88640_A0=2
+dtm_flow_mapping_mode_region_53.BCM88640_A0=2
+dtm_flow_mapping_mode_region_54.BCM88640_A0=2
+dtm_flow_mapping_mode_region_55.BCM88640_A0=2
+
+# Power up state (DOWN/UP/UP_AND_RELOCK). Can be configured per lane.
+pb_serdes_lane_power_state.BCM88640_A0=UP_AND_RELOCK
+
+# SeDes media type: Pre-configuration for tx params, according to
+# media type.
+# Allowed values: SHORT_BACKPLANE/LONG_BACKPLANE/CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type.BCM88640_A0=SHORT_BACKPLANE
+pb_serdes_lane_tx_phys_media_type_28.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_29.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_30.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_31.BCM88640_A0=CHIP2CHIP
+
+system_is_fe1600_in_system.BCM88640_A0=0
+
+# Counter engine configuration
+counter_engine_source_1.BCM88640_A0=0
+counter_engine_statistics_1.BCM88640_A0=4
+counter_engine_source_2.BCM88640_A0=1
+counter_engine_statistics_2.BCM88640_A0=4
+
+# Statistic Reporting
+stat_if_enable=0
+
+# Clock Phases: 0/90/180/270
+stat_if_phase=0
+
+# Rate in nm
+stat_if_sync_rate=0
+
+# TRUE/FALSE
+stat_if_parity_enable=FALSE
+
+# BILLING/FAP20V
+stat_if_report_mode=BILLING
+
+# Billing Mode
+# EGR_Q_NB/CUD/VSI_VLAN/BOTH_LIFS
+stat_if_report_billing_mode=VSI_VLAN
+
+# Fap20V Mode
+# QUEUE/PACKET
+stat_if_report_fap20v_mode=QUEUE
+
+# QUEUE_NUM/MC_ID (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_fabric_mc=QUEUE_NUM
+stat_if_report_fap20v_ing_mc=QUEUE_NUM
+
+# TRUE/FALSE (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_cnm_report=FALSE
+
+# TRUE/FALSE
+stat_if_report_fap20v_count_snoop=FALSE
+stat_if_report_original_pkt_size=FALSE
+stat_if_report_fap20v_single_copy_reported=FALSE
+
+schan_timeout_usec.BCM88640_A0=300000
+
+
+polled_irq_mode.BCM88640_A0=0
+polled_irq_delay.BCM88640_A0=1000
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88650: ENABLED
+# Options for 88640 compatible:
+# DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY / 16B_STACKING_ROUTE_HISTORY
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88640=DISABLED
+
+#########################################
+##cfg for BCM88750 (FE1600)
+#########################################
+
+fabric_device_mode.BCM88750=SINGLE_STAGE_FE2
+
+is_dual_mode.BCM88750=0
+system_is_vcs_128_in_system.BCM88750=0
+
+system_is_dual_mode_in_system.BCM88750=0
+system_is_single_mode_in_system.BCM88750=1
+
+system_is_fe600_in_system.BCM88750=0
+
+system_ref_core_clock_khz.BCM88750=1200000
+
+fabric_merge_cells.BCM88750=0
+fabric_multicast_mode.BCM88750=DIRECT
+fabric_load_balancing_mode.BCM88750=NORMAL_LOAD_BALANCE
+fabric_tdm_fragment.BCM88750=0x180
+##Allows single pipe device to send TDM traffic over the fabric primary pipe - available for Fe1600_B0 only
+#change  vcs128_unicast_priority to be lower than 2 - when enabling
+fabric_tdm_over_primary_pipe.BCM88750=0
+fabric_optimize_partial_links.BCM88750=0
+vcs128_unicast_priority.BCM88750=2
+
+polled_irq_mode.BCM88750=0
+polled_irq_delay.BCM88750=1000
+
+#Selects if to run MBIST (Memory Built In Self Test) of internal memory (tables) during startup.
+#Supported values: 0=don't run, 1=run, 2=run with extra logs
+#bist_enable.BCM88650=1
+bist_enable.BCM88750=1
+bist_enable.BCM88470=0
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88750=0
+load_firmware.BCM88750=2
+
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88750=2
+
+#enable\disable CL72
+port_init_cl72.BCM88750=1
+#Avaliable speeds for BCM88750: 5750, 6250, 10312, 11500, 12500
+port_init_speed.BCM88750=10312
+#LC PLL in\out 0=125MHz 1=156.25MHz
+serdes_fabric_clk_freq_in.BCM88750=1
+serdes_fabric_clk_freq_out.BCM88750=1
+serdes_mixed_rate_enable.BCM88750_B0=0
+
+# VSC128 or VSC256
+fabric_cell_format.BCM88750=VSC256
+
+# Core clock speed (MHz)
+core_clock_speed_khz.BCM88750=533333
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling,
+# SCHAN:
+schan_intr_enable.BCM88750=0
+schan_timeout_usec.BCM88750=300000
+# TDMA
+tdma_intr_enable.BCM88750=0
+tdma_timeout_usec.BCM88750=5000000
+# TSLAM
+tslam_intr_enable.BCM88750=0
+tslam_timeout_usec.BCM88750=5000000
+# MIIM
+miim_intr_enable.BCM88750=0
+miim_timeout_usec.BCM88750=300000
+
+#########################################
+##cfg for BCM88950 (FE3200)
+#########################################
+#Device  operation
+fabric_device_mode.BCM88950=SINGLE_STAGE_FE2
+fabric_load_balancing_mode.BCM88950=NORMAL_LOAD_BALANCE
+
+#Cell format
+system_is_vcs_128_in_system.BCM88950=0
+
+#Fabric pipe configuration
+
+fabric_num_pipes.BCM88950=1
+fabric_pipe_map.BCM88950=0
+system_contains_multiple_pipe_device.BCM88950=0
+
+#multicast table mode
+fabric_multicast_mode.BCM88950=DIRECT
+fe_mc_id_range.BCM88950=128K_HALF
+
+#Core clock and system reference clock (KHz)
+system_ref_core_clock_khz.BCM88950=1200000
+core_clock_speed_khz.BCM88950=720000
+
+#LC PLL in\out 0=125MHz 1=156.25MHz
+serdes_fabric_clk_freq_in.BCM88950=0
+serdes_fabric_clk_freq_out.BCM88950=1
+
+#TODO
+polled_irq_mode.BCM88950=1
+polled_irq_delay.BCM88950=1000
+
+#Memory Bist
+bist_enable.BCM88950=0
+
+#High voltage driver strap. If 0, connected to 1.25V supply; 
+#if 1, connected to 1V mode (For unused Falcon Quads that are connected to 1.0V).
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88950=0
+load_firmware.BCM88950=0x102
+
+
+##Per port properties
+#Possible values - KR_FEC, 64_66, RS_FEC, LL_RS_FEC
+backplane_serdes_encoding.BCM88950=RS_FEC
+
+#enable\disable CL72
+port_init_cl72.BCM88950=1
+
+#link speed
+port_init_speed.BCM88950=25000
+
+#Link connected to a reapter
+#Values: 0/1. Default: 0
+#repeater_link_enable_<port>.BCM88950=0
+
+##Fabric cell FIFO DMA
+fabric_cell_fifo_dma_enable.BCM88950=1
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling,
+# SCHAN:
+schan_intr_enable.BCM88950=0
+schan_timeout_usec.BCM88950=300000
+# TDMA
+tdma_intr_enable.BCM88950=0
+tdma_timeout_usec.BCM88950=5000000
+# TSLAM
+tslam_intr_enable.BCM88950=0
+tslam_timeout_usec.BCM88950=5000000
+# MIIM
+miim_intr_enable.BCM88950=0
+miim_timeout_usec.BCM88950=300000
+
+##############################
+# Configuration for devices run in emulation
+##############################
+#diag_emulator_partial_init.BCM88470=2
+#phy_simul.BCM88470=1
+#system_ref_core_clock_khz.BCM88470=250000
+#system_ref_core_clock_khz.BCM88470=600000
+#phy_simul.BCM88270=1
+
+polled_irq_mode.BCM88470=1
+polled_irq_mode.BCM88270=1
+
+schan_intr_enable.BCM88470=0
+schan_intr_enable.BCM88270=0
+
+# For emulation use:
+#schan_timeout_usec.BCM88470=600000000
+schan_timeout_usec.BCM88470=300000
+schan_timeout_usec.BCM88270=200000
+
+# TDMA
+tdma_intr_enable.BCM88470=0
+#tdma_intr_enable.BCM88270=0
+
+# For emulation use:
+#tdma_timeout_usec.BCM88470=600000000
+tdma_timeout_usec.BCM88470=60000000
+tdma_timeout_usec.BCM88270=500000
+
+# TSLAM
+tslam_intr_enable.BCM88470=0
+tslam_intr_enable.BCM88270=0
+
+# For emulation use:
+#tslam_timeout_usec.BCM88470=600000000
+tslam_timeout_usec.BCM88470=60000000
+tslam_timeout_usec.BCM88270=500000
+
+#otm_base_q_pair.BCM88470=2
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+# Support (and configure on init) packet processing features.
+# If not defined - only traffic management capabilities are enabled.
+packet_processing=1
+
+## PCP (Petra Co-Processor) features
+#pcp_elk.BCM88640_A0=1
+#pcp_oam.BCM88640_A0=1
+#pcp_dma.BCM88640_A0=1
+
+## Set/Override TDM related config variables
+#tdm.BCM88640_A0=1
+
+# If set, always configures synthesizers, even if the configured rate is
+# equal to
+# their nominal rate. Can be disabled to speedup bringup time
+# (keep in mind that if disabled, changing a synt to a non-nominal freq and
+# than back to nominal will not work
+#synt_over.BCM88640_A0=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88640_A0=100000000
+synt_ddr.BCM88640_A0=125000000
+synt_phy.BCM88640_A0=156250000
+
+
+############################
+### Warmboot & SW State ####
+############################
+#
+#HW journal working mode. Allowed values: 0-2.
+#   0 : Disabled
+#   1 : Commit After Each Api
+#   2 : Commit Upon User Request
+ha_hw_journal_mode=0
+
+ha_hw_journal_size=15728640
+ha_sw_journal_size=15728640
+ha_crash_recovery=1
+
+
+# stable_size - a strict bound on the application's external storage size
+stable_size.BCM88950=200000
+stable_size.BCM88750=200000
+stable_size.BCM88650=281000000
+stable_size.BCM88675=500000000
+stable_size.BCM88680=500000000
+stable_size.BCM88690=500000000
+stable_size.BCM88470=350000000
+stable_size.BCM88270=650000000
+stable_size=420000000
+
+# determine the memory size pre-allocated for the SDK's SW State
+sw_state_max_size.BCM88650=210000000
+sw_state_max_size.BCM88675=350000000
+sw_state_max_size.BCM88680=350000000
+sw_state_max_size.BCM88470=300000000
+sw_state_max_size.BCM88270=210000000
+sw_state_max_size=350000000
+
+# stable location
+## part of scache initialization for warmboot persistent storage.
+## values: 1-2:Not Valid for dnx 3: Store in a file  4: Use Shared Mem.
+# 4 is the preffered option, using 3 for Arad and FE in order to regress both modes.
+stable_location.BCM88950=3
+stable_location.BCM88750=3
+stable_location.BCM88650=3
+stable_location.BCM88660=3
+stable_location.BCM88675=3
+stable_location=3
+
+# stable_filename - the warmboot file name (if stored on a file) 
+stable_filename=/tmp/warmboot_data
+
+# emulation file name
+stable_filename.BCM88470=/tmp/warmboot_data
+
+
+# create the file in memory for a faster warmboot debug
+#stable_filename=/dev/shm/warmboot_data
+
+# stable_flags - not in use
+stable_flags=0
+
+############################
+############################
+
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88640=1
+logical_port_drop.BCM88640=-1
+
+#logical_port_mim_in.BCM88640=2
+#logical_port_mim_out.BCM88640=3
+
+## IPV6 tunnel
+bcm886xx_ipv6_tunnel_enable=1
+
+## Inlif Profile Management Mode - QoS L3 L2 marking mode
+#
+# BCM88660 ONLY
+#
+# QoS L3 L2 marking allows changing the DSCP and/or EXP values
+# of IP and/or MPLS packets according to the incoming port
+# (or inlif), and the Traffic Class/Drop Precedence.
+#
+# The inlif profile is used to control the DSCP/EXP marking.
+# This SOC property controls which mode is used for the inlif profile:
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the DSCP/EXP marking).
+# 0: Advanced mode (the user controls which inlif profile values perform DSCP/EXP marking directly).
+#bcm886xx_qos_l3_l2_marking=1
+
+## Unicast RPF mode per RIF
+#
+# This SOC property allows the user to set the unicast RPF mode - loose, strict or disabled - per RIF.
+# If disabled, the unicast RPF mode of a RIF is set globally.
+# Options: 0 / 1
+
+##Jericho only, number of inrif mac termination combinations. Legal values 0 - 16, default value 16 */
+#Note: Two sets of identical mac termination combinations with different RPF modes (loose and strict) 
+#will consume two termination combinations resources.
+#Two sets of identical mac termination combinations with and without loose RPF will consume only one resource.
+number_of_inrif_mac_termination_combinations=8
+
+##Jericho only, ipmc_l3mcastl2_mode SOC allows a per RIF program selection in the case of ipv4 MC with IPMC disable 
+#instead of the global bcmSwitchL3McastL2 switch control selection.
+#Legal values:
+#0: bcmSwitchL3McastL2 switch control.
+#1: PER In-RIF selection.
+#Note that enabling this SOC will reduce the number of In-RIF mac termination combinations bits by one to a maximum of 3 bits 
+#so it can't be enabled with number_of_inrif_mac_termination_combinations larger than 8.
+ipmc_l3mcastl2_mode = 1
+
+# The bcm_ipmc_add adds bridge or route entries according to the BCM_IPMC_L2 flag.
+# Setting custom_feature_ipmc_set_entry_type_by_rif=1 will use the related IN-RIF IPMC state (enable/disable) 
+# to select the bcm_ipmc_add entry type (bridge/route).
+#custom_feature_ipmc_set_entry_type_by_rif=0
+
+# bcm886xx_l3_ingress_urpf_enable=1
+
+## BOS handling mode
+# BCM8866X ONLY
+#
+# There are two ways to handle BOS, controlled by bcm886xx_mpls_termination_mode:
+# 0 - Use BOS as key in lookup.
+# 1 - Don't use it (except for reserved labels).
+#
+#bcm886xx_mpls_termination_key_mode=0
+
+# Color resolution mode allows the user to have more detailed metering color information.
+# BCM88660 ONLY
+#
+# Options: 0-2
+# 0: A red result from both Ethernet policer and meter implies DP=3.
+# 1: A red result from meter implies that DP=2, while a red result from rate (Ethernet policer) implies DP=3.
+#policer_color_resolution_mode=1
+
+## Inlif Profile Management Mode - Disable Same Interface Filter
+# BCM8866X ONLY
+#
+# Controls which mode is used for the inlif profile management.
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the same-interface filter).
+# 0: Advanced mode (the user controls which inlif profile values have the same-interface filter disabled for them).
+#bcm886xx_logical_interface_bridge_filter_enable=1
+
+## Default Block Forwarding Strength
+#
+# Configure the default forwarding strength of blocks.
+#
+# SOC Properties:
+#block_trap_strength_vtt - VTT block forwarding strength
+#block_trap_strength_flp - FLP block forwarding strength
+#block_trap_strength_hash - SLB block forwarding strength (BCM8866X ONLY)
+#block_trap_strength_pmf_0 - PMF 1st lookup forwarding strength
+#block_trap_strength_pmf_1 - PMF 2nd lookup forwarding strength
+#
+# Options: 0-7
+
+## Stateful Load Balancing
+# BCM8866X ONLY
+#
+# Stateful Load Balancing (SLB) allows the load balancing of ECMP and LAG
+# groups to become stateful.
+# In standard load balancing, removing a member from the ECMP/LAG
+# group may affect the selected member, since the formula
+# depends on group size.
+# In stateful load balancing the member is selected once and saved.
+# Later, the member is always retrieved, and does not depend on
+# the size of the LAG/ECMP group.
+#
+# resilient_hash_enable - Enable/disable SLB. Values:
+# 1 - Enable SLB.
+# 0 - Disable SLB.
+#resilient_hash_enable=1
+
+# When this flag is set (and speculative parsing is used) it is possible for a packet of L4oIPv4/6oMPLS(1-3 labels)oETH
+# with MPLS forwarding to use the L4 header, otherwise the IPv4/6 is the last known header.
+#Note: setting this flag can cause unexpected behavior when BOS is used in the scenario above.
+#custom_feature_speculative_L4_support=0
+
+#Make Arad SOC properties work for Arad+, by mapping the BCM88660 suffix to BCM88650
+soc_family.BCM88660=BCM88650
+#Make Arad SOC properties work for Jericho, by mapping the BCM88675 suffix to BCM88650
+soc_family.BCM88675=BCM88650
+#Make Arad SOC properties work for QMX, by mapping the BCM88375 suffix to BCM88650
+soc_family.BCM88375=BCM88650
+#Make Arad SOC properties work for Ardon, by mapping the BCM88202 suffix to BCM88650
+soc_family.BCM88202=BCM88650
+#Make FE3200 SOC properties work for FE3200 SKU 8952, by mapping the BCM88952 suffix to BCM88950
+soc_family.BCM88952=BCM88950
+#Make FE1600 SOC properties work for FE1600 SKU 8753, by mapping the BCM88753 suffix to BCM88750
+soc_family.BCM88753=BCM88750
+#Make FE1600 SOC properties work for FE1600 SKU 8752, by mapping the BCM88752 suffix to BCM88750
+soc_family.BCM88752=BCM88750
+#Make Arad SOC properties work for QAX, by mapping the BCM88470 suffix to BCM88650
+soc_family.BCM88470=BCM88650
+
+#Make Arad SOC properties work for QUX, by mapping the BCM88270 suffix to BCM88650
+soc_family.BCM88270=BCM88650
+#Make Arad SOC properties work for FLAIR, by mapping the BCM8206 suffix to BCM88650
+soc_family.BCM8206=BCM88650
+#Make Arad SOC properties work for JERICHO_PLUS, by mapping the BCM88470 suffix to BCM88650
+soc_family.BCM88680=BCM88650
+
+# Use different mymac addresses for ipv4 and ipv6 when using vrrp for mymac termination.
+#l3_vrrp_ipv6_distinct=1
+
+# Enable multiple mymac termination mode.
+# In order to enable it, also set l3_vrrp_ipv6_distinct=0 and l3_vrrp_max_vid=0 since vrrp and
+# multiple mymac mode can't co exist.
+#l3_multiple_mymac_termination_enable=1
+
+# Distinguish between ipv4 and all other l3 protocols when multiple mymac terminating
+#l3_multiple_mymac_termination_mode=1
+
+# Usually the final DP given by the meter (or the In-DP) is unchanged, and can be from 0-3.
+# When this SOC property is set to 1, when the final INGRESS DP is 2,
+# it is mapped to 1 instead, and thus only the values 0-1 and 3 can be output.
+# This has no effect when policer_color_resolution_mode=1.
+#custom_feature_always_map_result_dp_2_to_1=1
+
+# Dynamic port feature
+#custom_feature_dynamic_port=1
+
+# low power nif mac
+#low_power_nif_mac=0
+
+# allow modifications during traffic
+#custom_feature_allow_modifications_during_traffic=1
+
+# mem_cache_enable property
+# Cache memory mode - enable memory caching during init.
+# Note: The user MUST add the property name with suffix '_specific' before providing the list of the cached memories.
+# Possible options (suffixes):
+# _all        - enable all tables (excluding read-only/write-only/dynamic/signal)
+# _predefined - enable predefined list of tables
+# _parity     - enable tables protected by parity field
+# _ecc        - enable tables protected by ecc field
+# _specific   - enable specific tables - MUST add this suffix if specific tables should be cached
+# _specific_X - enable caching for memory X, where X is memory name. Note: will not work without the previous suffix
+# Example: (this example will enable caching of the IHP_RECYCLE_COMMAND table)
+# mem_cache_enable_specific.BCM88650=1 #(MUST be added in case specific tables should be cached)
+# mem_cache_enable_specific_IHP_RECYCLE_COMMAND.BCM88650=1
+# mem_cache_enable_specific.BCM88675=1
+# mem_cache_enable_specific_IPS_QUEUE_PRIORITY_TABLE.BCM88675=1
+
+mem_cache_enable_parity.BCM88650=1
+mem_cache_enable_parity.BCM88675=1
+mem_cache_enable_parity.BCM88202=1
+mem_cache_enable_parity.BCM88750=1
+mem_cache_enable_parity.BCM88950=1
+mem_cache_enable_ecc=0
+
+# mem_nocache property
+# Cache memory mode - disable memory caching for specific table during init.
+# Note: the user MUST add the default property name before providing the list of the uncached memories.
+# Possible options (suffixes):
+# specific_X - disable caching for memory X, where X is memory name. Note: will not work without the previous suffix
+# Example: (this example will enable caching of the IHP_TERMINATION_PROFILE_TABLE table)
+# mem_nocache.BCM88660=1 #(MUST be added in case there are uncached memories)
+# mem_nocache_IHP_TERMINATION_PROFILE_TABLE.BCM88660=1
+#mem_nocache.BCM88680=1
+#mem_nocache_PPDB_B_LIF_TABLE_LABEL_PROTOCOL_OR_LSP.BCM88680=1
+#mem_nocache_PPDB_B_LIF_TABLE.BCM88680=1
+
+
+custom_feature_no_backdoor=1
+
+# Jericho split horizon mode
+# 0 - Use 0-1 range for lif orientation.
+# 1 (default) - Use 0-1 range for lif orientation in AC lifs and 0-3 range for orientation in other lif types.
+split_horizon_forwarding_groups_mode.BCM88675=1
+split_horizon_forwarding_groups_mode.BCM88470=1
+split_horizon_forwarding_groups_mode.BCM88680=1
+
+
+# Entries capacities for public and private IP forwarding tables
+private_ip_frwrd_table_size=500000
+public_ip_frwrd_table_size=500000
+
+
+#Enable KAPS ARM and Descriptor-DMA
+dma_desc_aggregator_chain_length_max=500
+dma_desc_aggregator_buff_size_kb=100
+dma_desc_aggregator_timeout_usec=1000
+dma_desc_aggregator_enable_specific_KAPS=1
+
+#In Jericho the KAPS ARM DMA already consumes 64KB of buffer memory
+dma_desc_aggregator_buff_size_kb.BCM88675=40
+
+# Entries capacities for direct access tables in KAPS (8K granularity)
+#pmf_kaps_large_db_size=8096
+
+#enable expose of HW id instead of SW id in Traps.
+bcm886xx_rx_use_hw_trap_id.BCM88675=1
+
+# Jericho - maximum RIF Id ( valid range is 0 to 32*1024-1)
+#rif_id_max=20000
+
+#If set, never add the PPH learn extension (unless explictly required in FP action).
+#bcm886xx_pph_learn_extension_disable.BCM88650=0
+#bcm886xx_pph_learn_extension_disable.BCM88660=0
+#bcm886xx_pph_learn_extension_disable.BCM88675=0
+
+# Jericho - field_ip_first_fragment_parsed
+#field_ip_first_fragment_parsed=0
+
+# learning_fifo_dma_buffer_size in bytes (host memory size). Valid range is 20-327680
+learning_fifo_dma_buffer_size=200000
+# learning_fifo_dma_timeout in microseconds. Valid range is 0-65535. 0 means no timeout.
+learning_fifo_dma_timeout=32767
+# learning_fifo_dma_threshold valid range is 1-16384 (0x4000)
+learning_fifo_dma_threshold=4
+
+###################################
+########### OAM and BFD ###########
+###################################
+
+# OAM / BFD initialization
+# To enable OAM set oam_enable to 1
+# To enable BFD set bfd_enable to 1
+# Be aware that OAM requires more settings (Configuring OAMP and Recycle port)
+
+# oam_enable=1
+# bfd_enable=1
+
+# Set OAMP port
+num_oamp_ports.BCM88650=0
+
+# If BFD is used, runtime_performance_optimize_enable_sched_allocation should be set to 0
+# to prevent high memory consumption
+
+# Disable the following:
+# bcm886xx_next_hop_mac_extension_enable
+# bcm886xx_ipv6_tunnel_enable
+
+# To use IEEE 1588, configure DPLL clock
+
+# Configure recycle port (assuming ucode_port_40=RCY.0)
+
+#oam_rcy_port.BCM88650=40
+#tm_port_header_type_in_40.BCM88650=TM
+#tm_port_header_type_out_40.BCM88650=ETH
+#ucode_port_40.0=RCY.0:core_0.40
+
+# MPLS-TP channel types for OAM/BFD - If MPLS-TP used, channel should be specified
+# Available types: mplstp_bfd_control_channel_type
+#               mplstp_pw_ach_channel_type
+#               mplstp_dlm_channel_type
+#               mplstp_ilm_channel_type
+#               mplstp_dm_channel_type
+#               mplstp_ipv4_channel_type
+#               mplstp_cc_channel_type
+#               mplstp_cv_channel_type
+#               mplstp_on_demand_cv_channel_type
+#               mplstp_pwe_oam_channel_type
+#               mplstp_ipv6_channel_type
+#               mplstp_fault_oam_channel_type
+#               mplstp_g8113_channel_type
+#mplstp_g8113_channel_type=0x8902
+#mplstp_fault_oam_channel_type=0x5678
+
+# Use BFD MPLS TP
+#bfd_encapsulation_mode=1
+
+# Use 1711 protocol
+#custom_feature_y1711_enabled=1
+
+# OAM DMA threshold
+#oamp_fifo_dma_event_interface_enable=1
+#oamp_fifo_dma_event_interface_timeout=0
+#oamp_fifo_dma_event_interface_buffer_size=0x1000
+#oamp_fifo_dma_event_interface_threshold=10
+
+# PORT BASED PWE TERMINATION
+#pwe_termination_port_mode_enable =1
+
+# Walk around for Inlif data Errata, for GAL packets, lookup mpls table with valid mpls label
+# it's not offical solution, just for some dedicated customer.
+# offical solution will be PMF. please refer the relevant doc.
+#custom_feature_gal_lookup_exactly=1
+
+custom_feature_cmodel_loopback=1
+
+#for IPv6UC: use Tcam instead of KAPS
+#custom_feature_l3_ipv6_uc_use_tcam=0
+# ipv6_mc need KPB library
+custom_feature_ipv6_mc_forwarding_disable = 1
+vlan_match_criteria_mode=PON_PCP_ETHERTYPE
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/dnx.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/dnx.soc
new file mode 100644
index 0000000..eb90675
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/dnx.soc
@@ -0,0 +1,192 @@
+#
+# $Id: jer.soc,v 1.90 2013/08/14 08:32:00 ninash Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+#
+
+debug info
+debug appl rcload warn
+debug appl symtab warn
+debug bcm rx,tx,link,attach warn
+debug soc tests warn
+debug soc rx,phy,schan,reg,socmem,dma,mem,miim,mii,intr,counter,ddr warn
+debug soc common err
+debug sys verinet warn
+debug soc physim warn
+
+if $?QMX_A0 || $?BCM88370_A0 || $?BCM88371_A0 || $?BCM88371M_A0 || $?BCM88375_A0 || $?BCM88376_A0 || $?BCM88376M_A0 || $?BCM88377_A0 || $?BCM88378_A0 || $?BCM88379_A0 || \
+   $?QMX_A1 || $?BCM88370_A1 || $?BCM88371_A1 || $?BCM88371M_A1 || $?BCM88375_A1 || $?BCM88376_A1 || $?BCM88376M_A1 || $?BCM88377_A1 || $?BCM88378_A1 || $?BCM88379_A1 ||\
+   $?QMX_B0 || $?BCM88370_B0 || $?BCM88371_B0 || $?BCM88371M_B0 || $?BCM88375_B0 || $?BCM88376_B0 || $?BCM88376M_B0 || $?BCM88377_B0 || $?BCM88378_B0 || $?BCM88379_B0  \
+   'local QMX 1'
+if $?JERICHO_A0 || $?BCM88670_A0 || $?BCM88671_A0 || $?BCM88671M_A0 || $?BCM88672_A0 || $?BCM88673_A0 || $?BCM88674_A0 || $?BCM88675_A0 || $?BCM88675M_A0 || $?BCM88676_A0 || $?BCM88676M_A0 || $?BCM88678_A0 || $?BCM88679_A0 || \
+   $?JERICHO_A1 || $?BCM88670_A1 || $?BCM88671_A1 || $?BCM88671M_A1 || $?BCM88672_A1 || $?BCM88673_A1 || $?BCM88674_A1 || $?BCM88675_A1 || $?BCM88675M_A1 || $?BCM88676_A1 || $?BCM88676M_A1 || $?BCM88678_A1 || $?BCM88679_A1 || \
+   $?JERICHO_B0 || $?BCM88670_B0 || $?BCM88671_B0 || $?BCM88671M_B0 || $?BCM88672_B0 || $?BCM88673_B0 || $?BCM88674_B0 || $?BCM88675_B0 || $?BCM88675M_B0 || $?BCM88676_B0 || $?BCM88676M_B0 || $?BCM88678_B0 || $?BCM88679_B0 \
+   'local JERICHO 1'
+if $?BCM88680_A0 ||  $?BCM88681_A0 ||  $?BCM88682_A0 || $?BCM88683_A0 ||  $?BCM88380_A0 ||  $?BCM88381_A0 \
+   'local JERPLUS 1'
+
+if $?BCM88690_A0 \
+   'local JERTWO 1'
+
+if $?QMX \
+    'rcload bcm88375_board.soc'
+if $?JERICHO \
+    'rcload bcm88675_board.soc'
+
+if $?JERPLUS \
+    'rcload bcm88680_board.soc'
+
+#
+# For Jericho-2:
+# This will have to change when we have bcm88690_board.soc
+#
+if $?JERTWO \
+    'rcload bcm88680_board.soc'
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+set RCError=off
+debug appl shell warn
+if $?QMX \
+    'rcload /home/negev/bcm88375_dram_tune.soc'
+
+if $?JERICHO \
+    'rcload /home/negev/bcm88675_dram_tune.soc'
+
+debug appl shell =
+set RCError=on
+
+set RCError=off
+rcload combo28_dram.soc
+set RCError=on
+
+#Set fabric connect mode as FE for multi FAP system
+if $?diag_chassis " \
+   config add fabric_connect_mode.BCM88675=FE"
+
+# Set modid:
+# If diag_chassis is enabled (two line cards), and 'slot' is defined (slot is defined only when
+# working without a management card - set modid to be 'slot'
+# Otherwise (single line card, or management card), set modid to be 0 for unit 0, and 1 for unit != 0
+if $?diag_chassis && $?slot "\
+  local modid $slot" \
+else "\
+  local modid $unit"
+expr $modid==1; if $? "local modid 2"
+
+if $?module_id " \
+  local modid $module_id"
+
+echo "$unit: modid=$modid"
+
+# Set base_modid:
+# Id base_module_id is set, then set base_modid to have base_module_id value.
+# Otherwise, set base_modid to be 0.
+if $?base_module_id " \
+  local base_modid $base_module_id" \
+else " \
+  local base_modid 0"
+
+expr $base_modid > 0
+if $? " \
+  echo '$unit: base_modid=$base_modid'"
+
+if $?diag_chassis " \
+  local nof_devices 2" \
+else "\
+  local nof_devices 1"
+
+if $?n_devices " \
+  local nof_devices $n_devices"
+
+expr $nof_devices > 1
+if $? " \
+  echo '$unit: nof_devices=$nof_devices'"
+
+if $?mng_cpu " \
+  echo '$unit:management card - polling is set on'; \
+  config add polled_irq_mode.BCM88675=1; \
+  config add schan_intr_enable.BCM88675=0; \
+  config add tdma_intr_enable.BCM88675=0; \
+  config add tslam_intr_enable.BCM88675=0; \
+  config add miim_intr_enable.BCM88675=0; "
+
+#Counters unavailable in cmodel
+if $?cmodel " \
+  config add counter_engine_sampling_interval=0;"
+
+#default values in a case which these parameters are not exist
+if !$?diag_cosq_disable "\
+  local diag_cosq_disable 0"
+if !$?warmboot "\
+  local warmboot 0"
+if !$?diag_disable "\
+  local diag_disable 0"
+if !$?diag_no_itmh_prog_mode "\
+  local diag_no_itmh_prog_mode 0"
+if !$?l2_mode "\
+  local l2_mode 0"
+
+if $?JERPLUS "\
+  local diag_disable 0"
+local init_others NoLinkscan=0
+if $?JERPLUS "\
+  local init_others 'NoIntr=1 NoLinkscan=1 NoApplStk=0'"
+
+#Disable interrupts in cmodel
+if $?cmodel "\
+  local no_intr 1" \
+else "\
+  local no_intr 0"
+
+#
+# For Jericho-2, we TEMPORARILY disable some components to quickly enable
+# a working PCID version.
+# 
+if $?JERTWO "\
+  local no_soc 0"
+
+if $?JERTWO "\
+  local no_intr 1"
+
+
+#INIT_DNX ModID=$modid NofDevices=$nof_devices CosqDisable=$diag_cosq_disable NoAppl=$diag_disable Warmboot=$warmboot NoRxLos=1 $init_others NoItmhProgMode=$diag_no_itmh_prog_mode L2Mode=$l2_mode NoIntr=$no_intr NoSoc=$no_soc
+
+INIT_DNX
+
+#LED support section start
+#Program of LED0
+local ledcode_0 '02 05 67 2D 02 01 67 2D 02 11 67 2D 02 09 67 2D\
+ 02 15 67 2D 02 0D 67 2D 86 E0 3A 06 28 32 00 32\
+ 01 B7 97 75 3E 16 E0 CA 06 70 3E 77 3A 67 33 75\
+ 3A 77 1C 12 A0 F8 15 1A 00 57 32 0E 87 57 32 0F\
+ 87 57' #sdk88670.hex
+
+#Program of LED1
+local ledcode_1 '02 1D 67 2D 02 2D 67 2D 02 05 67 2D 02 0D 67 2D\
+ 02 09 67 2D 02 01 67 2D 86 E0 3A 06 28 32 00 32\
+ 01 B7 97 75 3E 16 E0 CA 06 70 3E 77 3A 67 33 75\
+ 3A 77 1C 12 A0 F8 15 1A 00 57 32 0E 87 57 32 0F\
+ 87 57' #sdk88670.hex
+
+
+#Program of LED2
+local ledcode_2 '02 01 67 2D 02 09 67 2D 02 0D 67 2D 02 05 67 2D\
+ 02 2D 67 2D 02 1D 67 2D 86 E0 3A 06 28 32 00 32\
+ 01 B7 97 75 3E 16 E0 CA 06 70 3E 77 3A 67 33 75\
+ 3A 77 1C 12 A0 F8 15 1A 00 57 32 0E 87 57 32 0F\
+ 87 57' #sdk88670.hex
+
+# Download LED code into LED processors and enable (if applicable).
+if $?feature_led_proc && !$?simulator \
+    "led 0 prog $ledcode_0; \
+     led 1 prog $ledcode_1; \
+     led 2 prog $ledcode_2; \
+     led auto on; \
+     led 0 start; \
+     led 1 start; \
+     led 2 start"
+
+
+echo "dnx.soc: Done............................."
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/dune.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/dune.soc
new file mode 100644
index 0000000..57f24ea
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/dune.soc
@@ -0,0 +1,1080 @@
+#
+# $Id: dune.soc,v 1.5 2011/12/20 10:53:28 yaronm Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+#
+# Configure fap device mode (TM/PP/TDM_OPTIMIZED/TDM_STANDARD)
+# and ftmh outlif extension depending on config variables 'packet_processing' and 'tdm' variables
+if $?tdm "\
+  echo '*** TDM MODE ***'; \
+  config add diag_cosq_disable=1; \
+  if !$?fap_device_mode 'config add fap_device_mode=TDM_STANDARD'; \
+  config add fabric_ftmh_outlif_extension=ALWAYS; \
+  config ext_qdr_type=NONE; \
+  config ext_ram_present=0"
+if !$?tdm && $?packet_processing "\
+  echo '*** PACKET PROCESSING MODE ***'; \
+  config add fabric_ftmh_outlif_extension=ALWAYS; \
+  config add fap_device_mode=PP; \
+  config add egress_encap_ip_tunnel_range_min=4095; \
+  config add egress_encap_ip_tunnel_range_max=4095; \
+  config add mpls_tunnel_term_label_range_min_0=1000; \
+  config add mpls_tunnel_term_label_range_max_0=1001; \
+  config add mpls_tunnel_term_label_range_min_1=1002; \
+  config add mpls_tunnel_term_label_range_max_1=1003; \
+  config add mpls_tunnel_term_label_range_min_2=1004; \
+  config add mpls_tunnel_term_label_range_max_2=1005; \
+  if !$?diag_cosq_disable 'config add diag_cosq_disable=0';"
+if !$?tdm && !$?packet_processing "\
+  echo '*** TM ONLY MODE ***'; \
+  config add fap_device_mode=TM; \
+  config add fabric_ftmh_outlif_extension=IF_MC; \
+  if !$?diag_cosq_disable 'config add diag_cosq_disable=0'"
+
+# When more than a single device, set connect mode to FE and modid
+# to the slot id. For a single device, set connect mode to SINGLE_FAP
+# and modid to 0. Note that when using single_fap, all fabric-facing serdes
+# lanes are set in loopback, for fabric multicast to work.
+# All options for fabric_connect_mode are FE/BACK2BACK/MESH/MULTI_STAGE_FE/SINGLE_FAP
+
+if !$?diag_cosq_disable "config add diag_cosq_disable=0"
+if !$?slot || !$?diag_chassis "local slot 0"
+if !$?board_type_GFA_BI "local board_type_GFA_BI 1"
+if !$?board_type_GFA_BI_2 "local board_type_GFA_BI_2 0"
+
+if $?diag_chassis " \
+  local nof_devices 2; \
+  config add fabric_connect_mode=FE" \
+else "\
+  local nof_devices 1; \
+  if !$?fabric_connect_mode 'config add fabric_connect_mode=SINGLE_FAP'"
+   
+#Enable all quartets. Can be done per quartet using _N suffix
+config add pb_serdes_qrtt_active=1
+
+local lane_rate_nif 6250000
+local lane_rate_com_a 6250000
+if $board_type_GFA_BI "\
+    local lane_rate_fbr 5000000; \
+    local lane_rate_com_b 3125000; \
+    config add fabric_ref_clock=250000; \
+    config add combo_nif_0=1; \
+    config add combo_nif_1=1" \
+else '\
+    local lane_rate_fbr 6250000; \
+    local lane_rate_com_b 6250000; \
+    config add fabric_ref_clock=312500; \
+    config add combo_nif_0=0; \
+    config add combo_nif_1=0; \
+    for i=32,59 \'config add pb_serdes_lane_tx_phys_media_type_$i=CHIP2CHIP\''
+
+# Nif serdes quartets
+for i=0,2 'config add pb_serdes_qrtt_max_expected_rate_$i=$lane_rate_nif'
+for i=4,6 'config add pb_serdes_qrtt_max_expected_rate_$i=$lane_rate_nif'
+
+# Nif serdes quartet (combo-a)
+config add pb_serdes_qrtt_max_expected_rate_3=$lane_rate_com_a
+
+# Nif serdes quartet (combo-b)
+config add pb_serdes_qrtt_max_expected_rate_7=$lane_rate_com_b
+
+# Fabric serdes quartets
+for i=8,14 'config add pb_serdes_qrtt_max_expected_rate_$i=$lane_rate_fbr'
+
+# set default rate to nif rate. Override fabric lanes.
+config add pb_serdes_lane_rate=$lane_rate_nif
+for i=12,15 'config add pb_serdes_lane_rate_$i=$lane_rate_com_a'
+for i=28,31 'config add pb_serdes_lane_rate_$i=$lane_rate_com_b'
+for i=32,59 'config add pb_serdes_lane_rate_$i=$lane_rate_fbr'
+
+# Board Type configuration.
+
+if $board_type_GFA_BI "\
+    echo Configure GFA_BI Port/Interfcae/Nif/SerDes parameters; \
+    config add ucode_port_1=RXAUI7; \
+    config add ucode_port_2=RXAUI6; \
+    config add ucode_port_3=XAUI7; \
+    config add ucode_port_4=RXAUI0; \
+    config add ucode_port_5=RXAUI2; \
+    config add ucode_port_6=RXAUI4; \
+    config add ucode_port_7=RXAUI12; \
+    config add ucode_port_8=RXAUI10; \
+    config add ucode_port_9=RXAUI8; \
+    config add pb_serdes_lane_swap_polarity_tx_9=1; \
+    config add pb_serdes_lane_swap_polarity_tx_29=1; \
+    config add pb_serdes_lane_swap_polarity_rx_13=1; \
+    config add pb_serdes_lane_swap_polarity_rx_18=1; \
+    config add pb_serdes_lane_swap_polarity_rx_22=1; \
+    config add pb_serdes_lane_swap_polarity_rx_30=1; \
+    config add pb_serdes_lane_swap_polarity_rx_31=1; \
+    config add pb_serdes_lane_rx_phys_zcnt=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt=1; \
+    config add pb_serdes_lane_rx_phys_dfelth=20; \
+    config add pb_serdes_lane_rx_phys_tlth=20; \
+    config add pb_serdes_lane_rx_phys_g1cnt=1; \
+    config add pb_serdes_lane_tx_phys_amp_12=30; \
+    config add pb_serdes_lane_tx_phys_main_12=18; \
+    config add pb_serdes_lane_tx_phys_pre_12=3; \
+    config add pb_serdes_lane_tx_phys_post_12=13; \
+    config add pb_serdes_lane_tx_phys_amp_13=30; \
+    config add pb_serdes_lane_tx_phys_main_13=18; \
+    config add pb_serdes_lane_tx_phys_pre_13=3; \
+    config add pb_serdes_lane_tx_phys_post_13=13; \
+    config add pb_serdes_lane_tx_phys_amp_14=30; \
+    config add pb_serdes_lane_tx_phys_main_14=18; \
+    config add pb_serdes_lane_tx_phys_pre_14=3; \
+    config add pb_serdes_lane_tx_phys_post_14=13; \
+    config add pb_serdes_lane_tx_phys_amp_15=30; \
+    config add pb_serdes_lane_tx_phys_main_15=18; \
+    config add pb_serdes_lane_tx_phys_pre_15=3; \
+    config add pb_serdes_lane_tx_phys_post_15=13;"
+    
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_3=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_3=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_3=15;  \
+    config add pb_serdes_lane_rx_phys_tlth_3=18;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_3=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_12=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_12=1;  \
+    config add pb_serdes_lane_rx_phys_tlth_12=8;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_13=18;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_13=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_13=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_13=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_13=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_14=17;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_14=2;  \
+    config add pb_serdes_lane_rx_phys_tlth_14=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_15=19;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_15=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_15=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_28=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_28=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_28=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_28=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_28=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_29=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_29=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_29=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_29=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_30=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_30=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_30=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_30=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_30=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_31=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_31=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_31=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_31=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_31=1;"
+    
+# TX params for fabric rate of 5000 mbps (Negev system).
+# Overrides media type configuration.
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_tx_phys_amp_32=31; \
+    config add pb_serdes_lane_tx_phys_main_32=24; \
+    config add pb_serdes_lane_tx_phys_pre_32=0; \
+    config add pb_serdes_lane_tx_phys_post_32=0; \
+    config add pb_serdes_lane_tx_phys_amp_33=31; \
+    config add pb_serdes_lane_tx_phys_main_33=24; \
+    config add pb_serdes_lane_tx_phys_pre_33=0; \
+    config add pb_serdes_lane_tx_phys_post_33=0; \
+    config add pb_serdes_lane_tx_phys_amp_34=31; \
+    config add pb_serdes_lane_tx_phys_main_34=24; \
+    config add pb_serdes_lane_tx_phys_pre_34=0; \
+    config add pb_serdes_lane_tx_phys_post_34=0; \
+    config add pb_serdes_lane_tx_phys_amp_35=31; \
+    config add pb_serdes_lane_tx_phys_main_35=24; \
+    config add pb_serdes_lane_tx_phys_pre_35=0; \
+    config add pb_serdes_lane_tx_phys_post_35=0; \
+    config add pb_serdes_lane_tx_phys_amp_36=31; \
+    config add pb_serdes_lane_tx_phys_main_36=24; \
+    config add pb_serdes_lane_tx_phys_pre_36=0; \
+    config add pb_serdes_lane_tx_phys_post_36=0; \
+    config add pb_serdes_lane_tx_phys_amp_37=31; \
+    config add pb_serdes_lane_tx_phys_main_37=24; \
+    config add pb_serdes_lane_tx_phys_pre_37=0; \
+    config add pb_serdes_lane_tx_phys_post_37=0; \
+    config add pb_serdes_lane_tx_phys_amp_38=31; \
+    config add pb_serdes_lane_tx_phys_main_38=24; \
+    config add pb_serdes_lane_tx_phys_pre_38=0; \
+    config add pb_serdes_lane_tx_phys_post_38=0; \
+    config add pb_serdes_lane_tx_phys_amp_39=31; \
+    config add pb_serdes_lane_tx_phys_main_39=24; \
+    config add pb_serdes_lane_tx_phys_pre_39=0; \
+    config add pb_serdes_lane_tx_phys_post_39=0; \
+    config add pb_serdes_lane_tx_phys_amp_40=31; \
+    config add pb_serdes_lane_tx_phys_main_40=24; \
+    config add pb_serdes_lane_tx_phys_pre_40=0; \
+    config add pb_serdes_lane_tx_phys_post_40=0; \
+    config add pb_serdes_lane_tx_phys_amp_41=31; \
+    config add pb_serdes_lane_tx_phys_main_41=24; \
+    config add pb_serdes_lane_tx_phys_pre_41=0; \
+    config add pb_serdes_lane_tx_phys_post_41=0; \
+    config add pb_serdes_lane_tx_phys_amp_42=31; \
+    config add pb_serdes_lane_tx_phys_main_42=24; \
+    config add pb_serdes_lane_tx_phys_pre_42=0; \
+    config add pb_serdes_lane_tx_phys_post_42=0"
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_tx_phys_amp_43=31; \
+    config add pb_serdes_lane_tx_phys_main_43=24; \
+    config add pb_serdes_lane_tx_phys_pre_43=0; \
+    config add pb_serdes_lane_tx_phys_post_43=0; \
+    config add pb_serdes_lane_tx_phys_amp_44=31; \
+    config add pb_serdes_lane_tx_phys_main_44=24; \
+    config add pb_serdes_lane_tx_phys_pre_44=0; \
+    config add pb_serdes_lane_tx_phys_post_44=0; \
+    config add pb_serdes_lane_tx_phys_amp_45=31; \
+    config add pb_serdes_lane_tx_phys_main_45=24; \
+    config add pb_serdes_lane_tx_phys_pre_45=0; \
+    config add pb_serdes_lane_tx_phys_post_45=0; \
+    config add pb_serdes_lane_tx_phys_amp_46=31; \
+    config add pb_serdes_lane_tx_phys_main_46=24; \
+    config add pb_serdes_lane_tx_phys_pre_46=0; \
+    config add pb_serdes_lane_tx_phys_post_46=0; \
+    config add pb_serdes_lane_tx_phys_amp_47=31; \
+    config add pb_serdes_lane_tx_phys_main_47=24; \
+    config add pb_serdes_lane_tx_phys_pre_47=0; \
+    config add pb_serdes_lane_tx_phys_post_47=0; \
+    config add pb_serdes_lane_tx_phys_amp_48=31; \
+    config add pb_serdes_lane_tx_phys_main_48=24; \
+    config add pb_serdes_lane_tx_phys_pre_48=0; \
+    config add pb_serdes_lane_tx_phys_post_48=0; \
+    config add pb_serdes_lane_tx_phys_amp_49=31; \
+    config add pb_serdes_lane_tx_phys_main_49=24; \
+    config add pb_serdes_lane_tx_phys_pre_49=0; \
+    config add pb_serdes_lane_tx_phys_post_49=0; \
+    config add pb_serdes_lane_tx_phys_amp_50=31; \
+    config add pb_serdes_lane_tx_phys_main_50=24; \
+    config add pb_serdes_lane_tx_phys_pre_50=0; \
+    config add pb_serdes_lane_tx_phys_post_50=0; \
+    config add pb_serdes_lane_tx_phys_amp_51=31; \
+    config add pb_serdes_lane_tx_phys_main_51=24; \
+    config add pb_serdes_lane_tx_phys_pre_51=0; \
+    config add pb_serdes_lane_tx_phys_post_51=0; \
+    config add pb_serdes_lane_tx_phys_amp_52=31; \
+    config add pb_serdes_lane_tx_phys_main_52=24; \
+    config add pb_serdes_lane_tx_phys_pre_52=0; \
+    config add pb_serdes_lane_tx_phys_post_52=0; \
+    config add pb_serdes_lane_tx_phys_amp_53=31; \
+    config add pb_serdes_lane_tx_phys_main_53=24; \
+    config add pb_serdes_lane_tx_phys_pre_53=0; \
+    config add pb_serdes_lane_tx_phys_post_53=0; \
+    config add pb_serdes_lane_tx_phys_amp_54=31; \
+    config add pb_serdes_lane_tx_phys_main_54=24; \
+    config add pb_serdes_lane_tx_phys_pre_54=0; \
+    config add pb_serdes_lane_tx_phys_post_54=0; \
+    config add pb_serdes_lane_tx_phys_amp_55=31; \
+    config add pb_serdes_lane_tx_phys_main_55=24; \
+    config add pb_serdes_lane_tx_phys_pre_55=0; \
+    config add pb_serdes_lane_tx_phys_post_55=0; \
+    config add pb_serdes_lane_tx_phys_amp_56=31; \
+    config add pb_serdes_lane_tx_phys_main_56=24; \
+    config add pb_serdes_lane_tx_phys_pre_56=0; \
+    config add pb_serdes_lane_tx_phys_post_56=0; \
+    config add pb_serdes_lane_tx_phys_amp_57=31; \
+    config add pb_serdes_lane_tx_phys_main_57=24; \
+    config add pb_serdes_lane_tx_phys_pre_57=0; \
+    config add pb_serdes_lane_tx_phys_post_57=0; \
+    config add pb_serdes_lane_tx_phys_amp_58=31; \
+    config add pb_serdes_lane_tx_phys_main_58=24; \
+    config add pb_serdes_lane_tx_phys_pre_58=0; \
+    config add pb_serdes_lane_tx_phys_post_58=0; \
+    config add pb_serdes_lane_tx_phys_amp_59=31; \
+    config add pb_serdes_lane_tx_phys_main_59=24; \
+    config add pb_serdes_lane_tx_phys_pre_59=0; \
+    config add pb_serdes_lane_tx_phys_post_59=0;"
+
+# RX params for fabric rate of 5000 mbps (Negev system)
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_32=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_32=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_32=21; \
+    config add pb_serdes_lane_rx_phys_tlth_32=35; \
+    config add pb_serdes_lane_rx_phys_g1cnt_32=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_33=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_33=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_33=28; \
+    config add pb_serdes_lane_rx_phys_tlth_33=16; \
+    config add pb_serdes_lane_rx_phys_g1cnt_33=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_34=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_34=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_34=18; \
+    config add pb_serdes_lane_rx_phys_tlth_34=26; \
+    config add pb_serdes_lane_rx_phys_g1cnt_34=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_35=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_35=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_35=23; \
+    config add pb_serdes_lane_rx_phys_tlth_35=14; \
+    config add pb_serdes_lane_rx_phys_g1cnt_35=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_36=22; \
+    config add pb_serdes_lane_rx_phys_z1cnt_36=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_36=22; \
+    config add pb_serdes_lane_rx_phys_tlth_36=30; \
+    config add pb_serdes_lane_rx_phys_g1cnt_36=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_37=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_37=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_37=20; \
+    config add pb_serdes_lane_rx_phys_tlth_37=14; \
+    config add pb_serdes_lane_rx_phys_g1cnt_37=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_38=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_38=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_38=23; \
+    config add pb_serdes_lane_rx_phys_tlth_38=29; \
+    config add pb_serdes_lane_rx_phys_g1cnt_38=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_39=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_39=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_39=24; \
+    config add pb_serdes_lane_rx_phys_tlth_39=30; \
+    config add pb_serdes_lane_rx_phys_g1cnt_39=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_40=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_40=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_40=21; \
+    config add pb_serdes_lane_rx_phys_tlth_40=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_40=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_41=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_41=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_41=20; \
+    config add pb_serdes_lane_rx_phys_tlth_41=6; \
+    config add pb_serdes_lane_rx_phys_g1cnt_41=1;"
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_42=20; \
+    config add pb_serdes_lane_rx_phys_z1cnt_42=3; \
+    config add pb_serdes_lane_rx_phys_dfelth_42=18; \
+    config add pb_serdes_lane_rx_phys_tlth_42=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_42=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_43=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_43=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_43=26; \
+    config add pb_serdes_lane_rx_phys_tlth_43=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_43=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_44=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_44=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_44=22; \
+    config add pb_serdes_lane_rx_phys_tlth_44=34; \
+    config add pb_serdes_lane_rx_phys_g1cnt_44=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_45=22; \
+    config add pb_serdes_lane_rx_phys_z1cnt_45=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_45=18; \
+    config add pb_serdes_lane_rx_phys_tlth_45=16; \
+    config add pb_serdes_lane_rx_phys_g1cnt_45=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_46=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_46=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_46=21; \
+    config add pb_serdes_lane_rx_phys_tlth_46=28; \
+    config add pb_serdes_lane_rx_phys_g1cnt_46=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_47=20; \
+    config add pb_serdes_lane_rx_phys_z1cnt_47=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_47=16; \
+    config add pb_serdes_lane_rx_phys_tlth_47=9; \
+    config add pb_serdes_lane_rx_phys_g1cnt_47=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_48=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_48=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_48=23; \
+    config add pb_serdes_lane_rx_phys_tlth_48=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_48=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_49=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_49=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_49=28; \
+    config add pb_serdes_lane_rx_phys_tlth_49=12; \
+    config add pb_serdes_lane_rx_phys_g1cnt_49=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_50=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_50=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_50=24;"
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_tlth_50=19; \
+    config add pb_serdes_lane_rx_phys_g1cnt_50=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_51=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_51=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_51=22; \
+    config add pb_serdes_lane_rx_phys_tlth_51=20; \
+    config add pb_serdes_lane_rx_phys_g1cnt_51=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_52=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_52=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_52=24; \
+    config add pb_serdes_lane_rx_phys_tlth_52=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_52=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_53=20; \
+    config add pb_serdes_lane_rx_phys_z1cnt_53=4; \
+    config add pb_serdes_lane_rx_phys_dfelth_53=10; \
+    config add pb_serdes_lane_rx_phys_tlth_53=5; \
+    config add pb_serdes_lane_rx_phys_g1cnt_53=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_54=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_54=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_54=29; \
+    config add pb_serdes_lane_rx_phys_tlth_54=25; \
+    config add pb_serdes_lane_rx_phys_g1cnt_54=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_55=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_55=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_55=24; \
+    config add pb_serdes_lane_rx_phys_tlth_55=22; \
+    config add pb_serdes_lane_rx_phys_g1cnt_55=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_56=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_56=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_56=22; \
+    config add pb_serdes_lane_rx_phys_tlth_56=31; \
+    config add pb_serdes_lane_rx_phys_g1cnt_56=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_57=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_57=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_57=22; \
+    config add pb_serdes_lane_rx_phys_tlth_57=25; \
+    config add pb_serdes_lane_rx_phys_g1cnt_57=1;"
+
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_58=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_58=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_58=23; \
+    config add pb_serdes_lane_rx_phys_tlth_58=26; \
+    config add pb_serdes_lane_rx_phys_g1cnt_58=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_59=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_59=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_59=21; \
+    config add pb_serdes_lane_rx_phys_tlth_59=25; \
+    config add pb_serdes_lane_rx_phys_g1cnt_59=1;"
+
+if $board_type_GFA_BI_2 "\
+    echo Configure GFA_BI_2 Port/Interfcae/Nif/SerDes parameters; \
+    config add ucode_port_1=RXAUI3; \
+    config add ucode_port_2=RXAUI2; \
+    config add ucode_port_3=RXAUI1; \
+    config add ucode_port_4=RXAUI0; \
+    config add ucode_port_5=RXAUI8; \
+    config add ucode_port_6=RXAUI9; \
+    config add ucode_port_7=RXAUI5; \
+    config add ucode_port_8=RXAUI4; \
+    config add ucode_port_9=RXAUI12; \
+    config add ucode_port_10=RXAUI13; \
+    config add ucode_port_11=RXAUI10; \
+    config add ucode_port_12=RXAUI11; \
+    config add lanes_swap_6=1; \
+    config add lanes_swap_10=1; \
+    config add lanes_swap_11=1; \
+    config add lanes_swap_12=1; \
+    config add pb_serdes_lane_swap_polarity_tx_12=1; \
+    config add pb_serdes_lane_swap_polarity_tx_14=1; \
+    config add pb_serdes_lane_swap_polarity_tx_28=1; \
+    config add pb_serdes_lane_swap_polarity_tx_31=1; \
+    config add pb_serdes_lane_swap_polarity_tx_32=1; \
+    config add pb_serdes_lane_swap_polarity_tx_34=1; \
+    config add pb_serdes_lane_swap_polarity_tx_41=1; \
+    config add pb_serdes_lane_swap_polarity_rx_48=1; \
+    config add pb_serdes_lane_swap_polarity_rx_50=1; \
+    config add pb_serdes_lane_swap_polarity_rx_52=1; \
+    config add pb_serdes_lane_swap_polarity_rx_55=1; \
+    config add pb_serdes_lane_swap_polarity_rx_56=1; \
+    config add pb_serdes_lane_swap_polarity_rx_58=1;"
+    
+if $board_type_GFA_BI_2 && !$system_is_fe600_in_system "\
+    config add pb_serdes_lane_rx_phys_zcnt=21; \
+    config add pb_serdes_lane_rx_phys_z1cnt=1; \
+    config add pb_serdes_lane_rx_phys_dfelth=1; \
+    config add pb_serdes_lane_rx_phys_tlth=8; \
+    config add pb_serdes_lane_rx_phys_g1cnt=1; \
+    config add pb_serdes_lane_tx_phys_amp=30;  \
+    config add pb_serdes_lane_tx_phys_main=18;  \
+    config add pb_serdes_lane_tx_phys_pre=3;  \
+    config add pb_serdes_lane_tx_phys_post=13;"
+
+#GFA-BI2, with fe600, slot 0
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_12=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_12=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_12=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_13=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_13=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_13=17;  \
+    config add pb_serdes_lane_rx_phys_tlth_13=7;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_13=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_14=18;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_14=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_14=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_14=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_15=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_15=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_15=21;  \
+    config add pb_serdes_lane_rx_phys_tlth_15=21;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_28=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_28=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_28=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_28=8;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_28=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_29=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_29=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_29=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_30=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_30=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_30=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_30=12;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_30=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_31=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_31=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_31=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_31=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_31=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_32=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_32=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_32=22;  \
+    config add pb_serdes_lane_rx_phys_tlth_32=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_32=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_33=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_33=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_33=13;  \
+    config add pb_serdes_lane_rx_phys_tlth_33=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_33=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_34=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_34=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_34=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_34=30;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_34=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_35=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_35=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_35=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_35=5;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_35=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_36=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_36=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_36=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_36=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_36=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_37=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_37=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_37=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_38=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_38=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_38=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_38=11;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_38=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_39=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_39=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_39=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_39=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_39=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_40=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_40=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_40=24;  \
+    config add pb_serdes_lane_rx_phys_tlth_40=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_40=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_41=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_41=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_41=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_41=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_41=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_42=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_42=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_42=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_42=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_42=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_43=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_43=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_43=25;  \
+    config add pb_serdes_lane_rx_phys_tlth_43=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_43=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_44=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_44=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_44=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_44=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_44=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_45=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_45=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_45=16;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_46=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_46=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_46=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_46=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_46=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_47=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_47=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_47=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_47=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_47=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_48=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_48=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_48=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_48=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_48=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_49=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_49=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_49=15;  \
+    config add pb_serdes_lane_rx_phys_tlth_49=13;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_49=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_50=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_50=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_50=17;  \
+    config add pb_serdes_lane_rx_phys_tlth_50=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_50=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_51=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_51=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_51=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_51=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_51=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_52=17;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_52=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_52=6;  \
+    config add pb_serdes_lane_rx_phys_tlth_52=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_52=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_53=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_53=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_53=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_53=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_53=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_54=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_54=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_54=5;  \
+    config add pb_serdes_lane_rx_phys_tlth_54=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_54=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_55=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_55=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_55=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_55=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_55=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_56=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_56=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_56=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_56=21;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_56=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_57=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_57=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_57=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_57=7;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_57=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_58=19;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_58=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_58=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_58=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_58=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_59=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_59=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_59=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_59=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_59=1"
+
+#GFA-BI2, with fe600, slot 1
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_12=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_12=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_12=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_12=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_13=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_13=4;  \
+    config add pb_serdes_lane_rx_phys_dfelth_13=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_13=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_13=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_14=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_14=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_14=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_14=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_15=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_15=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_15=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_15=9;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_28=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_28=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_28=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_28=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_28=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_29=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_29=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_29=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_29=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_30=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_30=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_30=6;  \
+    config add pb_serdes_lane_rx_phys_tlth_30=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_30=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_31=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_31=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_31=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_31=8;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_31=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_32=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_32=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_32=19;  \
+    config add pb_serdes_lane_rx_phys_tlth_32=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_32=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_33=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_33=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_33=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_33=10;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_33=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_34=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_34=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_34=17;  \
+    config add pb_serdes_lane_rx_phys_tlth_34=20;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_34=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_35=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_35=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_35=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_35=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_35=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_36=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_36=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_36=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_36=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_36=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_37=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_37=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_37=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_38=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_38=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_38=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_38=14;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_38=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_39=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_39=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_39=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_39=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_39=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_40=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_40=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_40=24;  \
+    config add pb_serdes_lane_rx_phys_tlth_40=18;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_40=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_41=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_41=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_41=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_41=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_41=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_42=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_42=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_42=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_42=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_42=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_43=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_43=4;  \
+    config add pb_serdes_lane_rx_phys_dfelth_43=22;  \
+    config add pb_serdes_lane_rx_phys_tlth_43=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_43=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_44=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_44=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_44=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_44=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_44=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_45=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_45=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_45=16;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_46=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_46=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_46=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_46=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_46=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_47=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_47=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_47=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_47=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_47=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_48=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_48=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_48=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_48=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_48=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_49=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_49=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_49=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_49=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_49=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_50=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_50=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_50=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_50=11;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_50=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_51=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_51=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_51=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_51=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_51=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_52=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_52=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_52=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_52=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_52=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_53=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_53=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_53=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_53=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_53=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_54=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_54=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_54=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_54=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_54=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_55=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_55=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_55=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_55=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_55=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_56=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_56=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_56=21;  \
+    config add pb_serdes_lane_rx_phys_tlth_56=16;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_56=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_57=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_57=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_57=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_57=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_57=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_58=17;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_58=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_58=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_58=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_58=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_59=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_59=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_59=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_59=12;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_59=1"
+ 
+# DRAM pre-configurations according to config variables which defines
+# the dram type.
+
+#DDR3
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333 || \
+   $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600 || \
+   $?dram_type_DDR3_MICRON_MT41J64M16_15E || \
+   $?dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G "\
+    config add ext_ram_type=DDR3; \
+    config add ext_ram_columns=1024; \
+    config add ext_ram_banks=8" 
+if $?dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G "\
+  config add ext_ram_total_size=3072"
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333 || \
+   $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600 || \
+   $?dram_type_DDR3_MICRON_MT41J64M16_15E "\
+    config add ext_ram_total_size=1536"
+
+#GDDR3
+if $?dram_type_GDDR3_SAMSUNG_K4J52324QE \
+  "config add ext_ram_type=GDDR3" \
+  "config add ext_ram_columns=512" \
+  "config add ext_ram_banks=8" \
+  "config add ext_ram_total_size=384"
+
+#DDR2
+if $?dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7 \
+  "config add ext_ram_type=DDR2" \
+  "config add ext_ram_columns=1024" \
+  "config add ext_ram_banks=4" \
+  "config add ext_ram_total_size=768"
+   
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600 \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=32" \
+  "config add ext_ram_c_cas_latency=11" \
+  "config add ext_ram_c_wr_latency=8" \
+  "config add ext_ram_t_rc=48750" \
+  "config add ext_ram_t_rfc=110000" \
+  "config add ext_ram_t_ras=35000" \
+  "config add ext_ram_t_faw=40000" \
+  "config add ext_ram_t_rcd_rd=13750" \
+  "config add ext_ram_t_rcd_wr=13750" \
+  "config add ext_ram_t_rrd=7500" \
+  "config add ext_ram_t_ref=3900" \
+  "config add ext_ram_t_rp=13750" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=7500" \
+  "config add ext_ram_t_rtp=7500"
+
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333 \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=32" \
+  "config add ext_ram_c_cas_latency=9" \
+  "config add ext_ram_c_wr_latency=8" \
+  "config add ext_ram_t_rc=50000" \
+  "config add ext_ram_t_rfc=110000" \
+  "config add ext_ram_t_ras=36666" \
+  "config add ext_ram_t_faw=45000" \
+  "config add ext_ram_t_rcd_rd=15000" \
+  "config add ext_ram_t_rcd_wr=15000" \
+  "config add ext_ram_t_rrd=8333" \
+  "config add ext_ram_t_ref=3900" \
+  "config add ext_ram_t_rp=15000" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=8333" \
+  "config add ext_ram_t_rtp=6666"
+
+if $?dram_type_DDR3_MICRON_MT41J64M16_15E || $?dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=32" \
+  "config add ext_ram_c_cas_latency=9" \
+  "config add ext_ram_c_wr_latency=7" \
+  "config add ext_ram_t_rc=49500" \
+  "config add ext_ram_t_rfc=110000" \
+  "config add ext_ram_t_ras=36000" \
+  "config add ext_ram_t_faw=50000" \
+  "config add ext_ram_t_rcd_rd=13500" \
+  "config add ext_ram_t_rcd_wr=13500" \
+  "config add ext_ram_t_rrd=7500" \
+  "config add ext_ram_t_ref=3900c" \
+  "config add ext_ram_t_rp=13500" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=7500" \
+  "config add ext_ram_t_rtp=7500"
+
+# Samsung (K4J52324QE)
+# The following parameters correspond to BC-16 dash, and were tested in
+# dune's lab with BC-14 dash dram working in frequency of 533MHz.
+if $?dram_type_GDDR3_SAMSUNG_K4J52324QE \
+  "config add ext_ram_ap_bit_pos=8" \
+  "config add ext_ram_burst_size=16" \
+  "config add ext_ram_gddr3_mrs0_wr1=0x00000312" \
+  "config add ext_ram_gddr3_emr0_wr1=0x0000109d" \
+  "config add ext_ram_c_cas_latency=9" \
+  "config add ext_ram_c_wr_latency=1" \
+  "config add ext_ram_t_rc_clk=24" \
+  "config add ext_ram_t_rfc_clk=29" \
+  "config add ext_ram_t_ras_clk=16" \
+  "config add ext_ram_t_faw_clk=5" \
+  "config add ext_ram_t_rcd_rd_clk=9" \
+  "config add ext_ram_t_rcd_wr_clk=6" \
+  "config add ext_ram_t_rrd_clk=7" \
+  "config add ext_ram_t_ref=1450" \
+  "config add ext_ram_t_rp_clk=8" \
+  "config add ext_ram_t_wr_clk=8" \
+  "config add ext_ram_t_wtr_clk=4" \
+  "config add ext_ram_t_rtp_clk=4"
+
+if $?dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7 \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=16" \
+  "config add ext_ram_auto_mode=TRUE" \
+  "config add ext_ram_c_cas_latency=6" \
+  "config add ext_ram_c_wr_latency=5" \
+  "config add ext_ram_t_rc=60000" \
+  "config add ext_ram_t_rfc=105000" \
+  "config add ext_ram_t_ras=45000" \
+  "config add ext_ram_t_faw=45000" \
+  "config add ext_ram_t_rcd_rd=15000" \
+  "config add ext_ram_t_rcd_wr=15000" \
+  "config add ext_ram_t_rrd=10000" \
+  "config add ext_ram_t_ref=3900)" \
+  "config add ext_ram_t_rp=15000" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=7500" \
+  "config add ext_ram_t_rtp=7500"
+
+
+# If using elk, override relevant parameters:
+if $?pcp_elk "\
+  echo *** OVERRIDING DEFAULT CONFIG WITH ELK CONFIG ***; \
+  config combo_ref_clock=125000; \
+  config pb_serdes_qrtt_max_expected_rate_7=3750000; \
+  config pb_serdes_lane_rate_28=3750000; \
+  config pb_serdes_lane_rate_29=3750000; \
+  config pb_serdes_lane_rate_30=3750000; \
+  config pb_serdes_lane_rate_31=3750000; \
+  config add external_lookup_mal=14; \
+  config add spaui_ipg_dic_mode=MIN; \
+  config add spaui_ipg_size=1; \
+  config add spaui_crc_mode=32b; \
+  config add spaui_preamble_size=0; \
+  config add spaui_preamble_skip_sop=1; \
+  config add spaui_is_double_size_sop_even_only=1; \
+  config add spaui_link_partner_double_size_bus=1"
+
+if $?pcp_elk || $?pcp_oam || $?pcp_dma "\
+  config add streaming_if_multi_port_mode=1; \
+  config add streaming_if_discard_pkt_streaming=0; \
+  config add fabric_ftmh_outlif_extension=IF_MC" \
+else "\
+  config add streaming_if_multi_port_mode=0; \
+  config add streaming_if_discard_pkt_streaming=1;"
+
+# Run sweep pcp on real HW
+if !$?plisim && !$?warmboot "   \
+  sweep pcp"
+  
+# Set synts according to reference clocks
+expr $nif_ref_clock*1000; local synt_nif $?
+expr $combo_ref_clock*1000; local synt_combo $?
+expr $fabric_ref_clock*1000; local synt_fabric $?
+
+# Real HW: Take petra out of reset
+if !$?plisim && !$?warmboot " \
+  gfa_bi utils petra_reset 1; \
+  echo Configure synthesizers:; \
+  echo Fabric: $synt_fabric; gfa_bi utils synt_set 1 $synt_fabric $synt_over; \
+  echo Combo:  $synt_combo;  gfa_bi utils synt_set 2 $synt_combo $synt_over; \
+  echo Nif:    $synt_nif;    gfa_bi utils synt_set 3 $synt_nif $synt_over; \
+  echo Core:   $synt_core;   gfa_bi utils synt_set 4 $synt_core $synt_over; \
+  echo DDR:    $synt_ddr;    gfa_bi utils synt_set 5 $synt_ddr $synt_over; \
+  echo Phy:    $synt_phy;    gfa_bi utils synt_set 10 $synt_phy $synt_over; \
+  gfa_bi utils petra_reset 0"
+  
+dbm soc error
+dbm bcm error
+
+echo "$unit:init soc"
+init soc
+echo "$unit:init soc - Done"
+
+echo "$unit:init bcm"
+init bcm
+
+echo "$unit:init bcm - Done"
+
+if $?warmboot "\
+  echo 'Warmboot: init done'; \
+  echo 'dune.soc: Done.'; \
+  exit"
+
+# Real HW + non using sweep: Init phys
+if !$?plisim " \
+  gfa_bi utils phys"
+
+if !$?no_bcm && !$?diag_disable "\
+  init appl_dpp $slot $nof_devices $diag_cosq_disable;" \
+else "\
+  echo 'Skipping diag_init. In order to run traffic, extra configuration must be performed.'"
+
+# If running BCM library:
+# Start linkscan task and set port linkscan mode.
+if !$?no_bcm && !$?pcp_elk "\
+  linkscan 250000; \
+  linkscan spbm=xe"
+     
+# If using elk, configure  bsp:
+if $?pcp_elk "\
+  echo *** BSP ELK CONFIGURATIONS ***; \
+  gfa_bi elk_init;"
+  
+# If using pcp dma then init dma
+if !$?plisim && $?pcp_dma " \
+  echo *** PCP DMA CONFIGURATIONS ***; \
+  gfa_bi dma_init"
+
+#if $?diag_chassis && !$slot "rcload rc/negev_rpc_master.soc.assi" # Master on slot 0
+#if $?diag_chassis && $slot "rcload rc/negev_rpc_slave.soc.assi"   # Slave on slot 1
+
+echo "dune.soc: Done."
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/init.sh b/bal_release/3rdparty/bcm-sdk/rc/qax/init.sh
new file mode 100755
index 0000000..f5b62bf
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/init.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+
+echo "I am here 4"
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/qax.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/qax.soc
new file mode 100755
index 0000000..895ae81
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/qax.soc
@@ -0,0 +1,128 @@
+#
+# $Id: qax.soc,v 1.90 2013/08/14 08:32:00 ninash Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+#
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+#der 0x40 4
+#exit
+
+debug info
+debug appl rcload warn
+debug appl symtab warn
+debug bcm rx,tx,link,attach warn
+debug soc tests warn
+debug soc rx,phy,schan,reg,socmem,dma,mem,miim,mii,intr,counter,ddr warn
+debug soc common err
+debug sys verinet warn
+debug soc physim warn
+
+if $?QAX \
+    'rcload bcm88470_board.soc'
+
+if $?QUX \
+    'rcload bcm88270_board.soc'
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+set RCError=off
+debug appl shell warn
+if $?QAX \
+    'rcload /home/negev/bcm88470_dram_tune.soc'
+if $?QUX \
+    'rcload /home/negev/bcm88270_dram_tune.soc'
+
+debug appl shell =
+set RCError=on
+
+set RCError=off
+rcload combo28_dram.soc
+set RCError=on
+
+#Set fabric connect mode as FE for multi FAP system
+if $?diag_chassis " \
+   config add fabric_connect_mode.BCM88470=FE"
+
+# Set modid:
+# If diag_chassis is enabled (two line cards), and 'slot' is defined (slot is defined only when
+# working without a management card - set modid to be 'slot'
+# Otherwise (single line card, or management card), set modid to be 0 for unit 0, and 1 for unit != 0
+if $?diag_chassis && $?slot "\
+  local modid $slot" \
+else "\
+  local modid $unit"
+expr $modid==1; if $? "local modid 2"
+
+if $?module_id " \
+  local modid $module_id"
+
+echo "$unit: modid=$modid"
+
+# Set base_modid:
+# Id base_module_id is set, then set base_modid to have base_module_id value.
+# Otherwise, set base_modid to be 0.
+if $?base_module_id " \
+  local base_modid $base_module_id" \
+else " \
+  local base_modid 0"
+
+expr $base_modid > 0
+if $? " \
+  echo '$unit: base_modid=$base_modid'"
+
+if $?diag_chassis " \
+  local nof_devices 2" \
+else "\
+  local nof_devices 1"
+
+if $?n_devices " \
+  local nof_devices $n_devices"
+
+expr $nof_devices > 1
+if $? " \
+  echo '$unit: nof_devices=$nof_devices'"
+
+if $?mng_cpu " \
+  echo '$unit:management card - polling is set on'; \
+  config add polled_irq_mode.BCM88675=1; \
+  config add schan_intr_enable.BCM88675=0; \
+  config add tdma_intr_enable.BCM88675=0; \
+  config add tslam_intr_enable.BCM88675=0; \
+  config add miim_intr_enable.BCM88675=0; "
+
+#Counters unavailable in cmodel
+if $?cmodel " \
+  config add counter_engine_sampling_interval=0;"
+
+#default values in a case which these parameters are not exist
+if !$?diag_cosq_disable "\
+  local diag_cosq_disable 0"
+if !$?warmboot "\
+  local warmboot 0"
+if !$?diag_disable "\
+  local diag_disable 0"
+if !$?diag_no_itmh_prog_mode "\
+  local diag_no_itmh_prog_mode 0"
+if !$?l2_mode "\
+  local l2_mode 0"
+
+#Disable interrupts in cmodel
+if $?cmodel "\
+  local no_intr 1" \
+else "\
+  local no_intr 0"
+
+if $?QUX "\
+    local no_elk 1" \
+else "\
+    local no_elk 0"
+
+INIT_DNX ModID=$modid NofDevices=$nof_devices CosqDisable=$diag_cosq_disable NoAppl=$diag_disable Warmboot=$warmboot NoRxLos=1 NoLinkscan=0 NoElkDevice=$no_elk NoElkAppl=0 NoItmhProgMode=$diag_no_itmh_prog_mode L2Mode=$l2_mode NoIntr=$no_intr
+
+#echo "performing force forward to sysport 1"
+#mod IHP_PINFO_LLR 0 256 DEFAULT_CPU_TRAP_CODE=200 DEFAULT_ACTION_PROFILE_FWD=7
+#mod IHB_FWD_ACT_PROFILE 200 1 FWD_ACT_DESTINATION=0x10001 FWD_ACT_DESTINATION_OVERWRITE=1
+#echo "performing credit flush from NIF to EGQ"
+#m NBIH_TX_EGRESS_CREDITS_DEBUG_PM TX_FLUSH_EGRESS_PORT_0_MLF_0_QMLF_N=1 TX_FLUSH_EGRESS_PORT_0_MLF_1_QMLF_N=1 TX_FLUSH_EGRESS_PORT_0_MLF_2_QMLF_N=1 TX_FLUSH_EGRESS_PORT_0_MLF_3_QMLF_N=1
+echo "qax.soc: Done."
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/rc.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/rc.soc
new file mode 100755
index 0000000..e766e99
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/rc.soc
@@ -0,0 +1,1792 @@
+# $Id: rc.soc,v 1.192 2013/07/17 22:13:43 dkelley Exp $
+# $Copyright: (c) 1998-2001 Broadcom Corp.
+# All Rights Reserved.$
+#
+# Initialization RC (run commands) file
+#
+#       These are default commands that are read and executed by default
+#       when BCM boots up.  Typically this file is called rc.soc and resides
+#       in the flash filesystem, NVRAM, or disk.
+#
+# Board Configuration Setting
+#
+#       This file uses configuration properties to know on which board
+#       it is running.  Currently one of following settings must be made:
+#
+#       BCM95670K8          config add herc8=1
+#       BCM95690K24         config add draco_b2b=1
+#       BCM95690K24S        config add draco_stk=1
+#       BCM95690R24         config add galahad=1
+#       BCM95690R24S        config add merlin=1
+#       BCM95690R48S        config add lancelot=1
+#       BCM95691K12         config add draco_k12=1
+#       White Knight        config add white_knight=1 (not shipping)
+#       Black Knight        config add black_knight=1 (not shipping)
+#       BCM95673K2S         config add twolynx=1
+#       BCM95673R8          config add herculynx=1
+#       BCM95673R24S        config add lynxalittle=1
+#       BCM95673R48S        config add lynxalot=1
+#       BCM95695P24SX_10    config add guenevere=1
+#       BCM95650K24         config add magnum=1 (automatic for 5650L)
+#       BCM95675            config add herc8_15=1
+#       BCM95650R24         config add tuc24_ref=1
+#       BCM95695P48LM       config add lm48p=1
+#       BCM95695P48LM-10    config add lm48p_B=1
+#       BCM956504P48LM-10   config add lm48p_C=1
+#       BCM956504P48LM-20   config add lm48p_C=1
+#       BCM956504P48LM-50   config add lm48p_D=1
+#       BCM956504P48POEREF  config add fbpoe=1
+#       BCM956504P24REF P0  config add fb24=1
+#       BCM956504P24    P0  config add fb24=1
+#       BCM956102P48        config add felix48=1
+#       BCM953300P24REF     config add mirage24=1
+#       BCM956800K20C       config add bradley_1g=1
+#       BCM956700K16        config add humv=1
+#       BCM956800K20        config add bradley=1
+#       BCM956580K16        config add goldwing=1
+#       BCM956314P24REF     config add bcm56314p24ref=1
+#       BCM956024P48REF     config add BCM956024P48REF=1
+#       BCM956224P48REF     config add BCM956224P48REF=1
+#       BCM956224R50T       config add BCM956224R50T=1
+#       BCM956024R50T       config add BCM956024R50T=1
+#       BCM56820K24XG       config add BCM56820K24XG=1
+#       BCM953314R24GS      config add BCM953314R24GS=1
+#       BCM953314K24        config add BCM953314K24=1
+#       BCM956820R24XG      config add BCM956820R24XG=1
+#       BCM956160R          config add bcm956160r=1
+
+if $?BCM56146_A0 \
+    'local BCM56146 1'
+
+if $?BCM56147_A0 \
+    'local BCM56147 1'
+
+
+if $?1 "echo rc: arguments not supported; exit"
+if !$?unit "echo rc: no current unit; exit"
+
+echo "rc: unit $unit device $devname"
+local quiet no
+local echo echo
+local rcdone \$rc$unit
+if !"expr $rcdone + 0" "local echo noecho; local quiet yes"
+
+# Set convenience local variables
+
+# simulation related
+#if $?plisim \
+#       "local no_bcm 1"
+if $?quickturn || $?plisim \
+	"local simulator 1"
+
+if $?simulator \
+    'echo -n "Chip init starts at: ";date'
+
+# board related
+if $?galahad \
+	"local draco_b2b 1"
+if $?black_knight || $?white_knight || $?merlin \
+	"local draco_herc4 1"
+
+#if $?QUX_A0 \
+#    'echo blablabla;der 0x40 4 ; exit'
+
+if $?FLAIR_A0 \
+    'echo blablabla;der 0x40 4 ; exit'
+
+if $?BCM88750_A0 || $?BCM88750_B0 || $?BCM88753_A0 || $?BCM88753_B0 || $?BCM88752_A0 || $?BCM88752_B0 ||  $?BCM88755_B0 || $?BCM88754_A0 || $?BCM88770_A1 || $?BCM88773_A1 || $?BCM88774_A1 || $?BCM88775_A1 || $?BCM88776_A1 || $?BCM88777_A1 || $?BCM88950_A0 || $?BCM88950_A1 || $?BCM88953_A1 || $?BCM88954_A1 || $?BCM88955_A1 || $?BCM88956_A1 || $?BCM88952_A0 || $?BCM88952_A1 || $?BCM88772_A1 \
+    'rcload dfe.soc ; exit'
+
+if $?BCM88790_A0 \
+    'rcload dnxf.soc ; exit'
+
+if $?ARAD_A0 || $?ARAD_B0 || $?ARAD_B1 || $?ARADPLUS_A0 || $?BCM88650_A0 || $?BCM88650_B0 || $?BCM88650_B1 || $?BCM88652_A0 || $?BCM88652_B0 || $?BCM88350_B1 || $?BCM88351_B1 || \
+   $?BCM88450_B1 || $?BCM88451_B1 || $?BCM88550_B1 || $?BCM88551_B1 || $?BCM88552_B1 || $?BCM88651_B1 || $?BCM88654_B1 || $?BCM88660_A0 || $?BCM88360_A0 || $?BCM88361_A0 || $?BCM88363_A0 ||\
+   $?BCM88460_A0 || $?BCM88461_A0 || $?BCM88560_A0 || $?BCM88561_A0 || $?BCM88562_A0 || $?BCM88661_A0 || $?BCM88664_A0  \
+    'rcload arad.soc ; exit'
+
+if $?BCM83207_A0 \
+    'rcload samar.soc ; exit'
+if $?BCM83208_A0 \
+    'rcload sinai.soc ; exit'
+
+if $?QAX_A0 || $?BCM88470_A0 || $?BCM88471_A0 || $?BCM88473_A0 || $?BCM88474_A0 || $?BCM88474H_A0 || $?BCM88476_A0 || $?BCM88477_A0 || \
+   $?QAX_B0 || $?BCM88470_B0 || $?BCM88471_B0 || $?BCM88473_B0 || $?BCM88474_B0 || $?BCM88474H_B0 || $?BCM88476_B0 || $?BCM88477_B0 \
+    'setenv QAX 1'
+    
+if $?QUX_A0 || $?BCM88270_A0 \
+    'setenv QUX 1'
+
+if $?JERICHO_A0 ||  $?BCM88670_A0 || $?BCM88671_A0 || $?BCM88671M_A0 || $?BCM88672_A0 || $?BCM88673_A0 || $?BCM88674_A0 || $?BCM88675_A0 || $?BCM88675M_A0 || $?BCM88676_A0 || $?BCM88676M_A0 || $?BCM88677_A0 || $?BCM88678_A0 || $?BCM88679_A0 || \
+   $?JERICHO_A1 ||  $?BCM88670_A1 || $?BCM88671_A1 || $?BCM88671M_A1 || $?BCM88672_A1 || $?BCM88673_A1 || $?BCM88674_A1 || $?BCM88675_A1 || $?BCM88675M_A1 || $?BCM88676_A1 || $?BCM88676M_A1 || $?BCM88677_A1 || $?BCM88678_A1 || $?BCM88679_A1 || \
+   $?QMX_A0     ||  $?BCM88370_A0 || $?BCM88371_A0 || $?BCM88371M_A0 || $?BCM88375_A0 || $?BCM88376_A0 || $?BCM88376M_A0 || $?BCM88377_A0 || $?BCM88378_A0 || $?BCM88379_A0 || \
+   $?QMX_A1     ||  $?BCM88370_A1 || $?BCM88371_A1 || $?BCM88371M_A1 || $?BCM88375_A1 || $?BCM88376_A1 || $?BCM88376M_A1 || $?BCM88377_A1 || $?BCM88378_A1 || $?BCM88379_A1 || \
+   $?JERICHO_B0 ||  $?BCM88670_B0 || $?BCM88671_B0 || $?BCM88671M_B0 || $?BCM88672_B0 || $?BCM88673_B0 || $?BCM88674_B0 || $?BCM88675_B0 || $?BCM88675M_B0 || $?BCM88676_B0 || $?BCM88676M_B0 || $?BCM88677_B0 || $?BCM88678_B0 || $?BCM88679_B0 || $?BCM88680_A0 || \
+   $?QMX_B0     ||  $?BCM88370_B0 || $?BCM88371_B0 || $?BCM88371M_B0 || $?BCM88375_B0 || $?BCM88376_B0 || $?BCM88376M_B0 || $?BCM88377_B0 || $?BCM88378_B0 || $?BCM88379_B0 || $?BCM88379_A1 || \
+   $?JERPLUS    ||  $?BCM88680_A0 ||  $?BCM88681_A0 ||  $?BCM88682_A0 || $?BCM88683_A0 ||  $?BCM88380_A0 ||  $?BCM88381_A0 \
+    'rcload jer.soc ; exit'
+
+if $?BCM88690_A0  \
+    'rcload dnx.soc ; exit'
+
+if $?QAX || $?QUX\
+    'rcload qax.soc ; rcload rpc.soc ;  exit'
+
+
+if $?BCM88202_A0 || $?ARDON_A0 || $?BCM88202_A1 || $?ARDON_A1 || $?BCM88202_A2 || $?ARDON_A2\
+    'rcload atmf.soc ; exit'
+
+if $?ACP \
+    'exit'
+
+if $?BCM88690_A0\
+    'exit'
+      
+if !"expr $pcidev + 0 == 0x5650" \
+	"local magnum 1"
+if $?drac || $?drac15 \
+	"local drac_any 1"
+if $?lynx || $?lynx15 \
+	"local lynx_any 1"
+if $?tucana || $?magnum \
+	"local tucana_any 1"
+if $?herc || $?herc15 \
+	"local herc_any 1"
+if $?firebolt || $?firebolt2 || $?helix || \
+   $?felix || $?helix15 || $?felix15 || $?raptor || $?raven || $?hawkeye\
+	"local firebolt_any 1"
+if !"expr $pcidev + 0 == 0xb501" \
+	"local firebolt_10x4 1"
+if $?easyrider \
+	"local easyrider_any 1"
+if !"expr $pcidev + 0 == 0xb602" \
+	"local easyrider_1x1 1"
+if $?bradley || $?humv || $?goldwing \
+	"local bradley_any 1"
+if $?drac_any || $?lynx_any || $?tucana_any \
+	"local xgs12_switch 1"
+if $?firebolt_any || $?easyrider_any || $?bradley_any \
+	"local xgs3_switch 1"
+if $?xgs12_switch || $?xgs3_switch \
+	"local xgs_switch 1"
+if $?herc_any \
+	"local xgs_fabric 1"
+if $?xgs_fabric || $?xgs_switch \
+	"local xgs 1"
+if !$?xgs \
+	"local strata 1"
+if $?strata && !$?gsl \
+	"local PBMP_ALL 0x0bffffff"
+if $?strata && $?gsl \
+	"local PBMP_ALL 0x080000ff"
+if $?BCM56214_A0 || $?BCM56014_A0 || $?BCM56215_A0 || \
+   $?BCM56214_A1 || $?BCM56014_A1 || $?BCM56215_A1 && \
+   !$?BCM956024P48REF \
+	"local rap24_ref 1"
+
+if $?BCM5655_A0 || $?BCM5655_B0 \
+        "local tucana_nohg 1"
+
+if $?BCM956024P48REF || $?BCM956224P48REF || $?BCM956024R50T || \
+   $?BCM956224R50T \
+        "local raven_eb_48p 1"
+
+if $?BCM953314R24GS \
+        "local hawkeye_p24 1"
+
+if $?BCM953314K24 \
+        "local hawkeye_k24 1"
+
+if $?firebolt_any && $?lm48p || $?lm48p_D \
+        "config add lmfb48=1"
+
+# Set software's wait for S-Channel response to 3 seconds for QuickTurn
+# (Recommend at least 10 seconds if the ARL is 100% busy with inserts.)
+if $?quickturn	"stimeout 3000000"
+if $?plisim	"stimeout 60000000"
+
+# Direct phy led programming: 5464 activity led becomes link/activity
+if $?drac_any && $?lancelot || $?lynxalot || $?guenevere \
+	"config add phy_led_ctrl=0x18"
+
+# Shutdown threads if system is already running
+if $?triumph3 \
+	"ibodSync off"
+counter off
+linkscan off
+if $?feature_arl_hashed && !$?simulator \
+        "l2mode off"
+if $?feature_ces && $?BCM56440_A0 \
+        "ces off"
+
+# Test on-chip memory before initializing
+#if !$?simulator "init soc; bist l3 arl cbp"
+init soc
+
+# Initialize miscellaneous chip registers
+init misc
+
+# Initialize external TCAM if necessary
+# NOTE : tcam is initialized during "init misc" unless 
+#        tcam_reset_toggle = 1 is configured
+if "expr $rcdone + 0" && !"expr $tcam_reset_toggle + 0" \
+        "dispatch attach 0 esw 0"
+if !"expr $tcam_reset_toggle + 0" "muxsel 0; muxsel 0x80"
+if !"expr $tcam_reset_toggle + 0" "init tcam; $echo rc: TCAM initialized"
+
+# Initialize the StrataSwitch MMU registers
+init mmu
+if $?katana2 \
+   kt2config.soc
+
+
+# Uncomment to turn off Single-Bit Error reporting on 5670
+#if $?herc "m mmu_intcntl pp_sbe_en=0"
+
+# Initialize Cell Free Address Pool
+# NOTE: this should NOT be done unless chip is known to have bad CFAP
+# memory entries that need to be mapped out.
+if $?cfap_tests "$echo rc: Initializing CFAP; cfapinit"
+
+$echo rc: MMU initialized
+
+#
+# Load uKernel
+#
+
+# Pick default FW names if not set already by config
+if !$?fw_core_0 \
+    'local fw_core_0 ${fw_prefix}_0_bfd_bhh.srec; \
+     if $?greyhound || $?hurricane2 || $?hurricane3 "local fw_core_0 ${fw_prefix}_0_ptpfull.srec"; \
+     if $?caladan3 "local fw_core_0 ${fw_prefix}_0.srec"; \
+     if $?helix4 && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?helix4 && $?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd_bhh.srec"; \
+     if $?tomahawk && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?tomahawk_plus && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?trident2plus && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+    '
+
+if !$?fw_core_1 \
+   'local fw_core_1 ${fw_prefix}_1_ptpfull.srec; \
+    if $?caladan3 "local fw_core_1 ${fw_prefix}_1_bs.srec"; \
+   '
+
+if !$?fw_core_2 \
+   "local fw_core_2 ${fw_prefix}_2_eth_lmdm.srec"
+
+# Load the firmwares
+if $?feature_cmicm && !$?rcpu_only && !$ihost_mode && !$?feature_iproc \
+    "mcsload 0 ${fw_core_0} InitMCS=true; \
+     mcsload 1 ${fw_core_1};"
+
+if $?hurricane2 \
+   "mcsload 0 ${fw_core_0} InitMCS=true;"
+
+if $?feature_iproc && !$?hurricane2 && !$?hurricane3 && !$?rcpu_only && !$?feature_uc_mhost && !$ihost_mode\
+    "mcsload 0 ${fw_core_0} InitMCS=true TwoStage=true TwoStageAddr=0x60000000;\
+     mcsload 1 ${fw_core_1} TwoStage=true TwoStageAddr=0x6002c000;"
+
+if $?feature_iproc && !$?rcpu_only && $?feature_uc_mhost && $?num_ucs\
+    'if !"expr $num_ucs > 0" "mcsload 0 ${fw_core_0} InitMCS=true"; \
+     if !"expr $num_ucs > 1" "mcsload 1 ${fw_core_1}"; \
+     if !"expr $num_ucs > 2" "mcsload 2 ${fw_core_2}";'
+
+#
+# Init CLI and BCM API
+#
+# This must be done after the raw register writes to avoid having state
+# clobbered.  NOTE: Tables are cleared by "init bcm" below.  If
+# table modifications are required, put them after "init bcm".  Some
+# registers might also be affected.
+#
+
+if !$?no_bcm \
+	"init bcm; \
+	 $echo rc: BCM driver initialized"
+
+if $?no_bcm \
+	"$echo rc: *** NOT initializing BCM driver ***"
+
+if $?no_bcm && $?strata \
+    'write vtable 0 1 VLAN_TAG=0,PORT_BITMAP=0,UT_PORT_BITMAP=0; \
+     insert vtable VLAN_TAG=1,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+     local pv \
+         VLAN_TAG=1,SP_ST=3,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+	 write ptable 0 32 PTYPE=0; \
+	 if !$?gsl "write ptable 0 24 $pv,PTYPE=1"; \
+	 if !$?gsl "write ptable 24 2 $pv,PTYPE=2"; \
+	 if $?gsl  "write ptable 0 8 $pv,PTYPE=2"; \
+	 write ptable 27 1 $pv,PTYPE=3; \
+     local pv'
+
+# Turn on mirroring of hardware ARL operations into software ARL table.
+if $?feature_arl_sorted \
+	"arlmode intr_dma; \
+	 $echo rc: ARL DMA shadowing enabled"
+
+if $?feature_arl_hashed && !$?simulator && !$?rcpu_only \
+	"l2mode interval=3000000; \
+	 $echo rc: L2 Table shadowing enabled"
+
+# If running BCM library, start linkscan task and set port modes
+
+if !$?no_bcm && !$?rcpu_only \
+	"linkscan 250000; \
+	 port fe,ge linkscan=on autoneg=on \
+		speed=0 fullduplex=true txpause=true rxpause=true; \
+	 port st linkscan=on txpause=false rxpause=false; \
+         port xe,ce linkscan=on autoneg=off \
+                speed=0 fullduplex=true txpause=true rxpause=true; \
+         port hg linkscan=on fullduplex=true txpause=false rxpause=false; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?rcpu_only \
+	"linkscan 250000; \
+	 port e linkscan=on; \
+	 port st linkscan=on; \
+     port xe linkscan=on; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?shadow \
+     "port il linkscan=on; \
+	  $echo rc: Interlaken Port mode initialized"
+
+# Selectively re-enable Auto Negotiation based on config port_force_an_list.
+#if $?port_force_an_list \
+#    "port $port_force_an_list autoneg=on"
+
+# No spanning tree is running, so put ports all in the forwarding state
+# stp support not available for shadow device.
+
+if !$?no_bcm && !$?shadow \
+	"stg stp 1 all forward"
+
+# Start counter task unless already started by "init bcm" above.
+if $?plisim "local dma false"
+if !$?plisim "local dma true"
+if $?device_eb_vli "local dma false"
+if $?no_bcm && !$?rcpu_only\
+	"counter Interval=1000 Pbm=all Dma=$dma; \
+	 $echo rc: Counter collection enabled"
+if $?rcpu_only \
+	"counter Interval=2000000 Pbm=all Dma=false; \
+	 $echo rc: Counter collection enabled"
+
+# Resynchronize the saved values kept by the 'show counter' command.
+if !$?simulator \
+    "counter sync"
+
+# By default, dump data of packets that go to CPU.
+if !$?testinit \
+	"pw report +raw"
+
+# Default LED processor program for various SDKs and reference designs.
+# Source code can be found in $SDK/led/examples.
+
+if !$?p48 "local ledcode '\
+ E0 28 60 7F 67 2F 67 6B 06 7F 80 D2 1A 74 01 12 \
+ 7E 85 05 D2 0F 71 19 52 00 12 7D 85 05 D2 1F 71 \
+ 23 52 00 12 7C 85 05 D2 05 71 2D 52 00 3A 68 32 \
+ 00 97 75 3B 12 A0 FE 7F 02 0A 50 32 01 97 75 47 \
+ 12 BA FE 7F 02 0A 50 12 BA FE 7F 95 75 59 85 12 \
+ A0 FE 7F 95 75 A8 85 77 9A 12 A0 FE 7F 95 75 63 \
+ 85 77 A1 16 7C DA 02 71 A1 77 A8 32 05 97 71 76 \
+ 06 7D D2 01 71 9A 06 7F 67 93 75 9A 32 02 97 71 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 7E D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5605.hex
+
+if $?p48 "local ledcode '\
+ E0 28 60 7F 67 43 67 3C 67 35 67 2F 06 7F 80 D2 \
+ 18 74 01 28 60 7F 67 9B 67 89 67 BF 67 83 67 3C \
+ 67 73 67 68 67 5D 06 7F 80 D2 1A 74 13 3A 70 67 \
+ AD 71 C3 77 BF 32 03 97 71 C3 77 BF 32 05 97 71 \
+ C3 77 BF 12 BA FE 7F 32 01 97 75 4F 02 06 50 32 \
+ 00 97 75 57 02 06 50 95 75 C3 85 77 BF 67 AD 75 \
+ BF 32 04 97 71 C3 77 BF 67 AD 75 BF 32 03 97 71 \
+ C3 77 BF 67 AD 75 BF 32 03 97 71 BF 32 04 97 71 \
+ BF 77 C3 67 B6 71 C3 77 BF 12 A0 FE 7F 32 00 97 \
+ 75 95 02 06 50 95 75 C3 85 77 BF 12 BA FE 7F 32 \
+ 01 97 75 A7 02 06 50 95 75 C3 85 77 BF 06 7F 12 \
+ 80 F8 15 1A 00 57 06 7F 12 80 F8 15 1A 07 57 32 \
+ 0F 87 57 32 0E 87 57'"					# p48.hex
+
+if $?herc && !$?black_knight "local ledcode '\
+ 02 01 67 36 29 32 08 D7 87 32 07 D7 87 32 01 D7 \
+ 87 32 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 \
+ 74 24 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 \
+ 87 91 74 2D 3A 28 10 DA 07 75 3E FA 02 57 EA 06 \
+ 57'"							# sdk5670.hex
+
+if $?herc && $?black_knight "local ledcode '\
+ 2A 03 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 00 \
+ D7 87 2A 06 32 08 D7 87 32 07 D7 87 32 01 D7 87 \
+ 32 00 D7 87 3A 08'"					# knigget.hex
+
+if $?drac_any "local ledcode '\
+ E0 28 60 C3 67 4E 67 8A 06 C3 80 D2 0C 74 01 28 \
+ 60 C3 32 00 D7 87 32 01 D7 87 32 07 D7 87 32 08 \
+ D7 87 32 0F 87 32 0F 87 32 0F 87 32 0F 87 12 C2 \
+ 85 05 D2 0F 71 38 52 00 12 C1 85 05 D2 1F 71 42 \
+ 52 00 12 C0 85 05 D2 05 71 4C 52 00 3A 38 32 00 \
+ 97 75 5A 12 A0 FE C3 02 0A 50 32 01 97 75 66 12 \
+ AD FE C3 02 0A 50 12 AD FE C3 95 75 78 85 12 A0 \
+ FE C3 95 75 C0 85 77 B9 12 A0 FE C3 95 75 82 85 \
+ 77 C7 16 C0 DA 02 71 C7 77 C0 32 05 97 71 9A 32 \
+ 02 97 71 B9 06 C1 D2 01 71 B9 06 C3 67 B2 75 B9 \
+ 32 03 97 71 C0 32 04 97 75 C7 06 C2 D2 07 71 C7 \
+ 77 C0 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5690.hex
+
+if $?draco_k12 "local ledcode '\
+ 02 0B A2 01 28 A2 01 60 C3 67 32 67 6E 06 C3 90 \
+ 75 02 12 C2 85 05 D2 0F 71 1C 52 00 12 C1 85 05 \
+ D2 1F 71 26 52 00 12 C0 85 05 D2 05 71 30 52 00 \
+ 3A 30 32 00 97 75 3E 12 A0 FE C3 02 0A 50 32 01 \
+ 97 75 4A 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 \
+ 5C 85 12 A0 FE C3 95 75 A6 85 77 9F 12 A0 FE C3 \
+ 95 75 66 85 77 AD 16 C0 DA 02 71 AD 77 A6 32 05 \
+ 97 71 7E 32 02 97 71 9F 06 C1 D2 01 71 9F 06 C3 \
+ 67 96 75 9F 32 03 97 71 A6 32 04 97 75 AD 06 C2 \
+ D2 07 71 AD 77 A6 12 80 A2 01 F8 15 1A 00 57 32 \
+ 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 \
+ 32 0E 87 57'"						# k12-5690.hex
+
+if $?herc && $?white_knight "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 07 \
+ D7 87 32 01 D7 87 32 00 D7 87 57'"			# wk5670.hex
+
+if $?herc && $?merlin "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"			# merlin5670.hex
+
+if $?herc && $?lancelot "local ledcode '\
+ 2A 05 67 12 2A 06 67 12 2A 03 67 12 2A 04 67 12 \
+ 3A 10 32 08 D7 87 32 00 D7 87 32 01 D7 87 32 07 \
+ D7 87 57'"						# lancelot.hex
+
+if $?xgs_fabric && $?guenevere "local ledcode '\
+ 2A 04 67 0A 2A 05 67 0A 3A 04 32 07 D7 87 32 00 \
+ 32 01 B7 D7 87 57'"                                    # guenevere5670.hex
+
+if $?drac_any && $?white_knight "local ledcode '\
+ E0 28 60 C3 67 2f 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# wk5690.hex
+
+if $?drac_any && $?merlin "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# merlin5690.hex
+
+if $?drac_any && $?galahad "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# galahad.hex
+
+if $?drac_any && $?lm "local ledcode '\
+E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+32 0F 87 57 32 0F 87 32 0E 87 57'"      # lm5690.hex
+
+if $?twolynx "local ledcode '\
+ 2A 01 67 0A 2A 00 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"                 # twolynx.hex
+
+if $?lynx_any && $?herculynx || $?lynxalot || $?lm || $?guenevere \
+	"local ledcode '\
+12 C0 85 05 D2 03 71 0A 52 00 2A 00 67 10 3A 04 \
+32 08 D7 87 06 C0 D2 01 71 22 32 0F 87 32 0F 87 \
+77 2A 32 00 D7 87 32 01 D7 87 32 07 D7 87 57'"      # herculynx.hex
+
+if $?tucana && !$?magnum "local ledcode '\
+ E0 67 23 D2 18 74 01 02 20 67 23 D2 38 74 09 02 \
+ 18 67 23 D2 1C 74 11 E9 02 80 45 80 81 DA 0D 74 \
+ 1A 3A 68 28 60 E3 67 4A 67 36 06 E4 30 87 06 E5 \
+ 30 87 06 E3 80 57 32 00 97 71 45 32 01 97 71 45 \
+ 02 0F 60 E5 57 02 0E 60 E5 57 06 E3 12 A0 F8 15 \
+ 1A 00 75 59 02 0E 60 E4 57 02 0F 60 E4 57'"        # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC 67 5A 67 9C 06 FA 67 DA 06 FB 67 DA \
+ 06 FC 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0E 74 51 3A 70 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 D7 85 77 D1 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 D4 16 FF DA 02 02 FA 71 D4 77 D7 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 D1 06 FC 67 CA 02 FB 75 \
+ D1 32 02 97 71 D1 32 03 97 71 D7 32 04 97 75 D4 \
+ 06 FD D2 07 02 FB 71 D4 77 D7 12 A0 F8 15 1A 00 \
+ 57 42 00 57 42 01 57 42 02 57 D2 02 74 E3 32 0F \
+ 87 77 E6 32 0E 87 D2 01 74 EE 32 0F 87 57 32 0E \
+ 87 57'"                                            # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 75 09 A2 01 60 FC 28 67 37 67 73 \
+ 06 FB 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 3A 70 32 00 97 75 43 12 C0 FE FC \
+ 02 0A 50 32 01 97 75 4F 12 DC FE FC 02 0A 50 12 \
+ DC FE FC 95 75 61 85 12 C0 FE FC 95 75 B0 85 77 \
+ A2 12 C0 FE FC 95 75 6B 85 77 A9 16 FF DA 02 71 \
+ A9 77 B0 32 05 97 71 7E 06 FE D2 01 71 A2 06 FC \
+ 67 9B 75 A2 32 02 97 71 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 FD D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0F 87 32 0F 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57'"                            # magnum_sdk.hex
+
+if $?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 71 10 60 FC 28 67 D0 67 C0 77 19 \
+ A2 01 60 FC 28 67 40 67 7C 06 FB 80 D2 1C 74 01 \
+ 12 FD 85 05 D2 0F 71 2A 52 00 12 FE 85 05 D2 1F \
+ 71 34 52 00 12 FF 85 05 D2 05 71 3E 52 00 3A 68 \
+ 32 00 97 75 4C 12 C0 FE FC 02 0A 50 32 01 97 75 \
+ 58 12 DC FE FC 02 0A 50 12 DC FE FC 95 75 6A 85 \
+ 12 C0 FE FC 95 75 B9 85 77 AB 12 C0 FE FC 95 75 \
+ 74 85 77 B2 16 FF DA 02 71 B2 77 B9 32 05 97 71 \
+ 87 06 FE D2 01 71 AB 06 FC 67 A4 75 AB 32 02 97 \
+ 71 AB 32 03 97 71 B9 32 04 97 75 B2 06 FD D2 07 \
+ 71 B2 77 B9 12 A0 F8 15 1A 00 57 32 0F 87 32 0F \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 \
+ 02 0E 32 00 97 71 CD 32 01 97 71 CD 80 30 87 57 \
+ 06 FC 12 A0 F8 15 1A 00 02 0F 75 DD 90 30 87 57'"  # magnum.hex
+
+if $?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC D2 18 71 0E 67 E9 67 D9 77 1A 67 5A \
+ 67 9C 06 FA 67 D0 06 FB 67 D0 06 FC 80 D2 1C 74 \
+ 01 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0D 74 51 3A 68 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 CD 85 77 C7 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 CA 16 FF DA 02 02 FA 71 CA 77 CD 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 C7 06 FC 67 C0 02 FB 75 \
+ C7 32 02 97 71 C7 32 03 97 71 CD 32 04 97 75 CA \
+ 12 A0 F8 15 1A 00 57 42 FF 57 42 FE 57 42 EF 57 \
+ 30 87 98 98 98 98 30 87 57 02 0E 32 00 97 71 E6 \
+ 32 01 97 71 E6 80 30 87 57 06 FC 12 A0 F8 15 1A \
+ 00 02 0F 75 F6 90 30 87 57'"                       # tuc24_ref.hex
+
+if $?herc8_15 "local ledcode '\
+ 02 01 28 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 \
+ 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 74 22 \
+ 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 87 91 \
+ 74 2B 3A 28'"                                      # sdk5675.hex
+
+if $?drac_any && $?lm "local ledcode '\
+ E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+ 00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+ 75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+ C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+ A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+ C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+ 71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+ 71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57 00 00 00 00 00'"  # lm5690.hex
+
+if $?drac_any && $?lm48p "local ledcode '\
+ E0 28 60 C3 67 7C 06 C3 80 28 60 C3 67 7C 67 40 \
+ 06 C3 90 28 60 C3 67 40 06 C3 80 80 D2 0C 74 01 \
+ 12 C2 85 05 D2 0F 71 2A 52 00 12 C1 85 05 D2 1F \
+ 71 34 52 00 12 C0 85 05 D2 05 71 3E 52 00 3A 30 \
+ 32 00 97 75 4C 12 A0 FE C3 02 0A 50 32 01 97 75 \
+ 58 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 6A 85 \
+ 12 A0 FE C3 95 75 B9 85 77 AB 12 A0 FE C3 95 75 \
+ 74 85 77 B2 16 C0 DA 02 71 B2 77 B9 32 05 97 71 \
+ 8C 32 02 97 71 AB 06 C1 D2 01 71 AB 06 C3 67 A4 \
+ 75 AB 32 03 97 71 B9 32 04 97 75 B2 06 C2 D2 07 \
+ 71 B2 77 B9 12 80 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695.hex
+
+if $?drac_any && $?lm48p_B "local ledcode '\
+ E0 28 60 C3 67 79 06 C3 67 3D 06 C3 80 28 60 C3 \
+ 67 3D 06 C3 67 79 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 27 52 00 12 C1 85 05 D2 1F 71 31 52 \
+ 00 12 C0 85 05 D2 05 71 3B 52 00 3A 30 32 00 97 \
+ 75 49 12 A0 FE C3 02 0A 50 32 01 97 75 55 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 67 85 12 A0 FE \
+ C3 95 75 B6 85 77 A8 12 A0 FE C3 95 75 71 85 77 \
+ AF 16 C0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 C1 D2 01 71 A8 06 C3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 C2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695_10.hex
+
+if $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 55 67 91 06 E3 80 28 60 E3 67 91 \
+ 67 55 06 E3 80 D2 18 74 01 28 60 E3 67 B9 75 26 \
+ 67 CE 67 55 77 2E 32 0E 87 32 08 87 67 C0 06 E3 \
+ 80 D2 1C 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 3A 70 32 00 97 75 61 12 A0 FE E3 02 0A \
+ 50 32 01 97 75 6D 12 BC FE E3 02 0A 50 12 BC FE \
+ E3 95 75 7F 85 12 A0 FE E3 95 75 CE 85 77 C0 12 \
+ A0 FE E3 95 75 89 85 77 C7 16 E0 DA 02 71 C7 77 \
+ CE 32 05 97 71 A1 32 02 97 71 C0 06 E1 D2 01 71 \
+ C0 06 E3 67 B9 75 C0 32 03 97 71 CE 32 04 97 75 \
+ C7 06 E2 D2 07 71 C7 77 CE 12 80 F8 15 1A 00 57 \
+ 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F \
+ 87 32 0E 87 57'"  # sdk56504.hex
+
+#Led program for new rev of FB SDK and Ref design
+if $?firebolt_any && !$?fb24 "local ledcode '\
+ E0 28 60 E3 67 4B 67 87 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AF 75 1C 67 C4 67 4B 77 24 32 0E 87 32 \
+ 08 87 67 B6 06 E3 80 D2 1C 74 0F 12 E2 85 05 D2 \
+ 0F 71 35 52 00 12 E1 85 05 D2 1F 71 3F 52 00 12 \
+ E0 85 05 D2 05 71 49 52 00 3A 70 32 00 97 75 57 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 63 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 75 85 12 A0 FE E3 95 \
+ 75 C4 85 77 B6 12 A0 FE E3 95 75 7F 85 77 BD 16 \
+ E0 DA 02 71 BD 77 C4 32 05 97 71 97 32 02 97 71 \
+ B6 06 E1 D2 01 71 B6 06 E3 67 AF 75 B6 32 03 97 \
+ 71 C4 32 04 97 75 BD 06 E2 D2 07 71 BD 77 C4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56504ref.hex
+
+#Override Default Firebolt LED program for Line Module
+if $?lm && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 79 06 E3 67 3D 06 E3 80 28 60 E3 \
+ 67 3D 06 E3 67 79 06 E3 80 D2 18 74 01 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 60 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B6 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AF 16 E0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 E2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # lm48p56504.hex
+
+#Override Default Firebolt LED program for Line Module -50 version
+if $?lm && $?lm48p_D && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 6D 06 E3 67 31 06 E3 80 D2 18 74 \
+ 01 12 E2 85 05 D2 0F 71 1B 52 00 12 E1 85 05 D2 \
+ 1F 71 25 52 00 12 E0 85 05 D2 05 71 2F 52 00 3A \
+ 60 32 00 97 75 3D 12 A0 FE E3 02 0A 50 32 01 97 \
+ 75 49 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 5B \
+ 85 12 A0 FE E3 95 75 AA 85 77 9C 12 A0 FE E3 95 \
+ 75 65 85 77 A3 16 E0 DA 02 71 A3 77 AA 32 05 97 \
+ 71 7D 32 02 97 71 9C 06 E1 D2 01 71 9C 06 E3 67 \
+ 95 75 9C 32 03 97 71 AA 32 04 97 75 A3 06 E2 D2 \
+ 07 71 A3 77 AA 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'" # lm48p56504_50.hex
+
+if $?lm && $?firebolt_10x4 "local ledcode '\
+ 02 18 28 32 07 67 1E 75 0A D7 87 32 01 D7 87 32 \
+ 00 D7 87 32 08 D7 87 80 D2 1C 74 02 3A 0C 12 80 \
+ F8 15 1A 00 57 '" # lm12pcx456501.hex
+
+if $?fbpoe && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 85 67 49 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AD 75 1A 67 C2 77 20 32 0E 87 32 08 87 \
+ 67 49 06 E3 80 D2 1A 74 0F 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 32 00 97 75 55 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 61 12 BA FE E3 02 0A \
+ 50 12 BA FE E3 95 75 73 85 12 A0 FE E3 95 75 C2 \
+ 85 77 B4 12 A0 FE E3 95 75 7D 85 77 BB 16 E0 DA \
+ 02 71 BB 77 C2 32 05 97 71 95 32 02 97 71 B4 06 \
+ E1 D2 01 71 B4 06 E3 67 AD 75 B4 32 03 97 71 C2 \
+ 32 04 97 75 BB 06 E2 D2 07 71 BB 77 C2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'" # poe48p56504.hex
+
+#Override Default Firebolt LED program for felix
+if $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0E 87 32 0F 87 57'"  # sdk56102.hex
+
+#Override Default Felix LED program for felix48
+if $?felix48 && $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'"  # felix48.hex
+
+if $?easyrider_any "local ledcode '\
+ E0 28 60 E3 67 59 67 95 06 E3 80 28 60 E3 67 95 \
+ 67 59 06 E3 80 D2 0C 74 01 28 60 E3 67 BD 75 26 \
+ 67 D2 67 59 77 2E 32 0E 87 32 08 87 67 C4 06 E3 \
+ 80 D2 0D 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 67 C4 67 C4 3A 38 32 00 97 75 65 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 71 12 AD FE E3 02 0A \
+ 50 12 AD FE E3 95 75 83 85 12 A0 FE E3 95 75 D2 \
+ 85 77 C4 12 A0 FE E3 95 75 8D 85 77 CB 16 E0 DA \
+ 02 71 CB 77 D2 32 05 97 71 A5 32 02 97 71 C4 06 \
+ E1 D2 01 71 C4 06 E3 67 BD 75 C4 32 03 97 71 D2 \
+ 32 04 97 75 CB 06 E2 D2 07 71 CB 77 D2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'"   # sdk56601.hex
+
+#Override Default Easyrider LED program for 56602
+if $?easyrider_1x1 "local ledcode '\
+ E0 60 E1 67 7C 67 7C 06 E1 80 D2 0C 74 01 02 0C \
+ 28 60 E1 67 75 75 1D 67 8A 67 39 77 25 32 0E 87 \
+ 32 08 87 67 7C 06 E1 D2 00 02 00 74 10 12 E0 85 \
+ 05 D2 05 71 37 52 00 3A 38 32 00 97 75 45 12 A0 \
+ FE E1 02 0A 50 32 01 97 75 51 12 AD FE E1 02 0A \
+ 50 12 AD FE E1 95 75 63 85 12 A0 FE E1 95 75 8A \
+ 85 77 7C 12 A0 FE E1 95 75 6D 85 77 83 16 E0 DA \
+ 02 71 83 77 8A 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'"   # sdk56602.hex
+
+#Override Default  LED program for 53300
+if $?mirage24 "local ledcode '\
+ E0 28 60 E3 67 6B 67 2F 06 E3 80 D2 18 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A2 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 9E 16 E0 DA 02 71 9E 77 A2 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A2 32 04 97 75 9E 06 E2 D2 07 71 \
+ 9E 77 A2 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E \
+ 87 57 32 0E 87 57'"  # sdk53300.hex
+
+#Override Default LED program for 56314
+if $?bcm56314p24ref "local ledcode '\
+ E0 28 60 E3 67 79 67 3D 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 79 67 A8 06 E3 80 D2 1C 74 0F 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 38 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B0 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AC 16 E0 DA 02 71 AC 77 B0 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B0 32 04 97 75 AC 06 E2 D2 07 71 AC 77 \
+ B0 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ 32 0E 87 57'"  # bcm956314p24ref.hex
+
+if $?bradley "local ledcode '\
+ E0 28 60 F2 67 1B 06 F2 80 D2 14 74 01 86 F3 12 \
+ F0 85 05 D2 05 71 19 52 00 3A 28 32 00 97 75 27 \
+ 12 A8 FE F2 02 0A 50 32 01 97 75 33 12 BC FE F2 \
+ 02 0A 50 12 BC FE F2 95 75 45 85 12 A8 FE F2 95 \
+ 75 91 85 77 57 12 A8 FE F2 95 75 4F 85 77 8A 16 \
+ F0 DA 02 71 8A 77 91 06 F2 12 94 F8 15 02 02 C1 \
+ 74 6E 02 04 C1 74 6E 02 08 C1 74 6E 77 74 C6 F3 \
+ 74 91 77 8A 06 F2 67 7C 75 83 77 91 12 80 F8 15 \
+ 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 \
+ 57 32 0F 87 32 0E 87 57'"     # sdk56800.hex
+
+if $?humv "local ledcode '\
+ E0 28 60 F2 67 21 06 F2 80 D2 08 74 0F F2 02 D2 \
+ 12 74 01 86 F3 12 F0 85 05 D2 05 71 1F 52 00 3A \
+ 20 32 00 97 75 2D 12 A8 FE F2 02 0A 50 32 01 97 \
+ 75 39 12 BA FE F2 02 0A 50 12 BA FE F2 95 75 4B \
+ 85 12 A8 FE F2 95 75 97 85 77 5D 12 A8 FE F2 95 \
+ 75 55 85 77 90 16 F0 DA 02 71 90 77 97 06 F2 12 \
+ 94 F8 15 02 02 C1 74 74 02 04 C1 74 74 02 08 C1 \
+ 74 74 77 7A C6 F3 74 97 77 90 06 F2 67 82 75 89 \
+ 77 97 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56700.hex
+
+if $?bradley_1g "local ledcode '\
+ E0 28 60 E3 67 2F 67 6B 06 E3 80 D2 14 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 50 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 B4 FE E3 02 0A 50 12 B4 FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A8 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 A1 16 E0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 E2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 '"  # sdk56800c.hex
+
+if $?goldwing "local ledcode '\
+ E0 28 60 F3 D2 10 75 0E 67 3B 67 94 77 12 67 94 \
+ 67 3B 06 F3 80 D2 14 74 01 86 F4 12 F2 85 05 D2 \
+ 0F 71 25 52 00 12 F1 85 05 D2 1F 71 2F 52 00 12 \
+ F0 85 05 D2 05 71 39 52 00 3A 50 32 00 97 75 47 \
+ 12 A8 FE F3 02 0A 50 32 01 97 75 53 12 BC FE F3 \
+ 02 0A 50 12 BC FE F3 95 75 65 85 12 A8 FE F3 95 \
+ 75 C0 85 77 77 12 A8 FE F3 95 75 6F 85 77 B9 16 \
+ F0 DA 02 71 B9 77 C0 06 F3 12 94 F8 15 02 02 C1 \
+ 74 8E 02 04 C1 74 8E 02 08 C1 74 8E 77 B2 C6 F4 \
+ 74 C0 77 B9 06 F3 67 AB 75 B2 32 04 75 B2 32 03 \
+ 97 71 C0 06 F2 D2 07 71 B9 77 C0 12 80 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 '"                          # sdk56580.hex
+
+if $?humv && $?lm "local ledcode '\
+ 02 04 28 D2 08 74 0A F2 02 28 32 07 67 29 75 11 \
+ D7 87 60 E4 67 30 06 E4 60 E4 67 4C 06 E4 32 08 \
+ D7 87 80 D2 12 74 02 3A 30 12 80 F8 15 1A 00 57 \
+ 06 E4 12 94 F8 15 02 10 C1 70 42 12 D2 FE E4 02 \
+ 0A 50 12 D2 FE E4 95 75 6D 85 77 68 06 E4 12 94 \
+ F8 15 02 20 C1 70 5E 12 C0 FE E4 02 0A 50 12 C0 \
+ FE E4 95 75 6D 85 77 68 32 0E D7 87 57 32 0F D7 \
+ 87 57 '"                                         # lm12p56802.hex
+
+
+if $?raptor "local ledcode '\
+ 02 06 28 60 FF 67 64 67 93 06 FF 80 D2 36 74 02 \
+ 02 04 28 60 FF 67 BB 75 1E 32 0E 87 77 21 32 0F \
+ 87 67 7D 06 FF 80 D2 06 74 12 02 01 28 60 FF 67 \
+ BB 75 38 32 0E 87 77 3B 32 0F 87 67 7D 06 FF 80 \
+ D2 03 74 2C 12 FE 85 05 D2 0F 71 4E 52 00 12 FD \
+ 85 05 D2 1F 71 58 52 00 12 FC 85 05 D2 05 71 62 \
+ 52 00 3A C8 32 01 97 75 76 32 00 97 75 C9 16 FC \
+ DA 02 71 C9 77 D0 32 00 97 75 C2 77 D0 32 00 97 \
+ 75 86 32 0E 87 57 32 01 97 75 8F 32 0E 87 57 32 \
+ 0F 87 57 32 05 97 71 A3 32 02 97 71 C2 06 FD D2 \
+ 01 71 C2 06 FF 67 BB 75 C2 32 03 97 71 D0 32 04 \
+ 97 75 C9 06 FE D2 07 71 C9 77 D0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" # sdk56018.hex
+
+if $?raptor && $?rap24_ref "local ledcode '\
+ 02 06 60 E1 67 48 67 31 06 E1 80 D2 1E 71 02 02 \
+ 05 60 E1 67 48 67 31 06 E1 90 D2 03 74 11 02 02 \
+ 60 E1 67 48 67 31 06 E1 90 D2 00 74 20 86 E0 3A \
+ 38 06 E1 67 50 75 57 28 32 00 32 01 B7 97 75 57 \
+ 16 E0 CA 05 74 5B 77 57 06 E1 67 50 75 57 77 5B \
+ 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00'" # sdk56214.hex
+
+if $?raven_eb_48p "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 71 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024p48ref.hex
+
+if $?BCM956024R50T "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 75 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024r50t.hex
+
+if $?scorpion || $?conqueror "local ledcode '\
+ 02 18 28 60 E1 67 12 06 E1 90 D2 00 74 02 86 E0 \
+ 3A 18 67 2D 75 34 28 32 00 32 01 B7 97 75 38 16 \
+ E0 CA 05 74 38 77 34 67 2D 75 34 77 38 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 \
+ 00 00 00'" #sdk56820.hex
+
+if $?scorpion && $?BCM956820R24XG "local ledcode '\
+ 02 01 28 67 D0 02 02 28 67 D6 67 D0 02 01 28 67 \
+ D6 02 04 28 67 D0 02 03 28 67 D6 67 D0 02 04 28 \
+ 67 D6 02 05 28 67 D0 02 06 28 67 D6 67 D0 02 05 \
+ 28 67 D6 02 07 28 67 D0 02 08 28 67 D6 67 D0 02 \
+ 07 28 67 D6 02 09 28 67 D0 02 0A 28 67 D6 67 D0 \
+ 02 09 28 67 D6 02 0C 28 67 D0 02 0B 28 67 D6 67 \
+ D0 02 0C 28 67 D6 02 0D 28 67 D0 02 0E 28 67 D6 \
+ 67 D0 02 0D 28 67 D6 02 0F 28 67 D0 02 10 28 67 \
+ D6 67 D0 02 0F 28 67 D6 02 11 28 67 D0 02 12 28 \
+ 67 D6 67 D0 02 11 28 67 D6 02 14 28 67 D0 02 13 \
+ 28 67 D6 67 D0 02 14 28 67 D6 02 15 28 67 D0 02 \
+ 16 28 67 D6 67 D0 02 15 28 67 D6 02 17 28 67 D0 \
+ 02 18 28 67 D6 67 D0 02 17 28 67 D6 86 E0 3A 30 \
+ 67 F1 75 F8 77 FC 67 F1 75 F8 28 32 00 32 01 B7 \
+ 97 75 F8 16 E0 CA 05 74 FC 77 F8 67 F1 75 F8 77 \
+ FC 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ '" #bcm956820r24xg.hex
+
+if $?valkyrie "local ledcode '\
+ 02 02 67 A9 67 94 02 03 67 A9 67 94 02 05 67 A9 \
+ 67 94 02 04 67 A9 67 94 02 06 67 A9 67 94 02 07 \
+ 67 A9 67 94 02 12 67 A9 67 94 02 13 67 A9 67 94 \
+ 02 0E 67 A9 67 94 02 0F 67 A9 67 94 02 11 67 A9 \
+ 67 94 02 10 67 A9 67 94 02 1A 67 A9 67 94 02 20 \
+ 67 A9 67 94 02 21 67 A9 67 94 02 22 67 A9 67 94 \
+ 02 23 67 A9 67 94 02 24 67 A9 67 94 02 2F 67 A9 \
+ 67 94 02 2E 67 A9 67 94 02 1B 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56680.hex
+
+if $?valkyrie2 "local ledcode '\
+ 02 1E 67 A9 67 94 02 1F 67 A9 67 94 02 21 67 A9 \
+ 67 94 02 20 67 A9 67 94 02 22 67 A9 67 94 02 23 \
+ 67 A9 67 94 02 24 67 A9 67 94 02 25 67 A9 67 94 \
+ 02 26 67 A9 67 94 02 27 67 A9 67 94 02 29 67 A9 \
+ 67 94 02 28 67 A9 67 94 02 2A 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 02 2E 67 A9 67 94 02 2F 67 A9 67 94 02 31 67 A9 \
+ 67 94 02 30 67 A9 67 94 02 32 67 A9 67 94 02 33 \
+ 67 A9 67 94 02 34 67 A9 67 94 02 35 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56685.hex
+
+if $?hawkeye_p24 "local ledcode '\
+ 02 01 28 60 E3 67 43 67 1C 06 E3 80 D2 19 74 02 \
+ 12 E0 85 05 D2 03 71 1A 52 00 3A 60 32 00 32 01 \
+ B7 97 75 2B 12 E4 FE E3 02 01 50 12 E4 FE E3 95 \
+ 75 3B 85 06 E3 67 55 75 6A 77 5C 16 E0 DA 01 71 \
+ 6A 77 5C 06 E3 67 55 75 6A 32 03 97 71 5C 32 04 \
+ 97 75 6A 77 63 12 A0 F8 15 1A 00 57 32 0E 87 32 \
+ 0F 87 57 32 0F 87 32 0E 87 57 32 0F 87 32 0F 87 \
+ 57'"  #bcm953314p24ref.hex
+
+if $?hawkeye_k24 "local ledcode '\
+ 02 01 28 60 E1 67 3D 67 1C 06 E1 80 D2 19 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 30 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 50 16 E0 DA 02 71 4C 77 50 06 E1 67 \
+ 45 75 50 77 4C 12 A0 F8 15 1A 00 57 32 0E 87 57 \
+ 32 0F 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #bcm953314k24.hex
+
+if !"expr $pcidev + 0 == 0xb624" "local ledcode '\
+ 02 1C 28 67 18 02 1D 28 67 18 02 1E 28 67 18 02 \
+ 1F 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56624.hex
+
+if !"expr $pcidev + 0 == 0xb626" "local ledcode '\
+ 02 1A 28 67 22 02 1B 28 67 22 02 1C 28 67 22 02 \
+ 1D 28 67 22 02 1E 28 67 22 02 1F 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56626.hex
+
+if !"expr $pcidev + 0 == 0xb628" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56628.hex
+
+if !"expr $pcidev + 0 == 0xb629" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56629.hex
+
+if !"expr $pcidev + 0 == 0xb634" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb630" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb636" "local ledcode '\
+ 02 2A 28 67 22 02 32 28 67 22 02 1A 28 67 22 02 \
+ 1B 28 67 22 02 1C 28 67 22 02 1D 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56636.hex
+
+if !"expr $pcidev + 0 == 0xb638" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56638.hex
+
+if !"expr $pcidev + 0 == 0xb639" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56639.hex
+
+if !"expr $pcidev + 0 == 0xb334" "local ledcode '\
+ 02 02 28 60 E1 67 3D 67 1C 06 E1 80 D2 1E 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 38 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 4C 16 E0 DA 02 71 50 77 4C 06 E1 67 \
+ 45 75 4C 77 50 12 A0 F8 15 1A 00 57 32 0F 87 57 \
+ 32 0E 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #sdk56334.hex
+
+if $?apollo "local ledcode '\
+ 02 1E 28 60 E0 67 58 67 73 06 E0 80 28 60 E0 67 \
+ 73 67 58 06 E0 80 D2 36 74 02 02 1A 28 60 E0 67 \
+ 9B 75 29 67 B0 67 58 77 31 32 0E 87 32 08 87 67 \
+ A2 06 E0 80 D2 1E 74 1C 12 E2 85 05 D2 0F 71 42 \
+ 52 00 12 E1 85 05 D2 1F 71 4C 52 00 12 E3 85 05 \
+ D2 05 71 56 52 00 3A 70 32 00 97 75 64 32 01 97 \
+ 71 6B 77 B0 32 01 97 71 A9 77 A2 16 E3 DA 02 71 \
+ A9 77 B0 32 05 97 75 83 32 02 97 71 A2 06 E1 D2 \
+ 01 71 A2 06 E0 67 9B 75 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 E2 D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" #sdk56524.hex
+
+if $?tomahawk || $?tomahawk_plus "local ledcode '\
+ 02 00 28 60 E1 67 25 67 14 06 E1 80 D2 40 74 02 \
+ 86 E0 3A FC 28 32 00 32 01 B7 97 75 37 16 E0 CA \
+ 05 74 3E 77 37 67 2B 75 37 77 45 12 A0 F8 15 1A \
+ 00 57 28 32 07 97 57 32 0E 87 32 0E 87 57 32 0F \
+ 87 32 0E 87 57 32 0E 87 32 0F 87 57 00 00 00 00'" #sdk56960.hex
+
+if $?trident2plus "local ledcode '\
+ 02 01 28 60 E1 67 31 67 20 06 E1 80 D2 31 74 02 \
+ 86 E0 3A C0 67 37 75 1C 67 51 77 20 67 43 77 43 \
+ 28 32 00 32 01 B7 97 75 43 16 E0 CA 05 74 4A 77 \
+ 43 67 37 75 43 77 51 12 A0 F8 15 1A 00 57 28 32 \
+ 07 97 57 32 0E 87 32 0E 87 57 32 0F 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 00 00 00 00 00 00 00 00'" #sdk56860.hex
+
+if $?apache "local ledcode '\
+ 02 00 67 24 67 0F 80 D2 24 74 02 86 E0 3A F8 67 \
+ 34 75 16 77 1D 57 67 3C 75 62 77 44 57 67 3C 75 \
+ 4E 77 58 57 67 2C 75 62 77 70 07 57 07 12 A0 F8 \
+ 15 1A 00 57 07 12 A0 F8 15 1A 04 57 07 12 A0 F8 \
+ 15 1A 05 57 16 E0 CA 1E 74 69 77 62 07 57 16 E0 \
+ CA 1E 74 70 77 62 07 57 16 E0 CA 1E 74 69 77 70 \
+ 07 57 32 0E 87 32 0E 87 57 32 0F 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 00 00 00 00 00 00 00 00 00'" #sdk56560.hex
+
+if $?generic8led "local ledcode '\
+ 06 E1 D2 40 71 11 E0 60 E1 16 E3 DA 01 71 15 60 \
+ E3 67 5D 75 2B 12 01 61 E3 67 71 28 67 32 86 E0 \
+ 16 E2 81 61 E2 DA 1E 75 2B 3A 08 E9 61 E2 86 E1 \
+ 77 00 67 5D 75 38 77 3C 67 64 77 64 67 41 67 4F \
+ 57 28 32 01 97 75 64 16 E0 CA 05 74 68 77 64 28 \
+ 32 00 97 75 64 16 E0 CA 05 74 68 77 64 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 09 75 64 77 \
+ 68 12 05 67 6C 12 04 67 6C 12 03 67 6C 12 02 67 \
+ 6C 12 01 67 6C 12 00 67 6C 57 00 00 00 00 00 00'" #generic8led.hex
+
+# Download LED code into LED processor and enable (if applicable).
+
+if $?feature_led_proc && $?ledcode && !$?simulator \
+	"led prog $ledcode; \
+	 led auto on; led start"
+
+# Setup Greyhound LED processor
+if $?greyhound \
+    "rcload gh_ledup.soc"
+
+# Setup Hurricane3 LED processor
+if $?hurricane3 \
+    "rcload hr3_led.soc"
+
+# Setup Tomahawk LED processor
+if $?tomahawk && !$?simulator \
+    "led 1 prog $ledcode; \
+     led 1 auto on; led 1 start; \
+     led 2 prog $ledcode; \
+     led 2 auto on; led 2 start"
+
+# Setup Tomahawk+ LED processor
+if $?tomahawk_plus && !$?simulator \
+    "led 1 prog $ledcode; \
+     led 1 auto on; led 1 start; \
+     led 2 prog $ledcode; \
+     led 2 auto on; led 2 start"
+
+# If loading multiple rc.soc, upon loading the last unit, restart
+# all LED processors so any common blinking is in sync.
+
+if !"expr $?feature_led_proc && !$?simulator && $unit == $units - 1" \
+	"*:led stop; *:led start"
+
+# Run counter DMA task 4 times per second to achieve better
+# ctr_xaui_activity.
+if $?bradley_any \
+        "ctr interval=250000"
+
+# Initialize Hercules UC modid 0 entry to point to the CPU
+if $?herc_any \
+	"w uc 0 1 1"
+
+# Additional configuration for 48-port in Stacking mode.
+# On the 48-port platform, rc.soc is run twice; once on unit 0 and
+# then once on unit 1.  The turbo port on unit N is geN.
+# All turbo port traffic must be tagged; see vlan add below.
+# See $SDK/doc/48-port.txt for more information including how
+# to configure IPG values for line rate operation.
+
+if $?p48 && $?unit0 \
+	"local turbo_port 0; local my_modid 1;"
+
+if $?p48 && $?unit1 \
+	"local turbo_port 1; local my_modid 2;"
+
+if $?p48 \
+	"m config st_is_mirr=0 st_module=1 st_mcnt=1 st_simplex=0 st_link=0; \
+	 m config.g$turbo_port st_link=1; \
+	 m gmacc2.ge$turbo_port ipgt=8 mclkfq=1; \
+	 m fe_maxf maxfr=1560; \
+	 m maxfr maxfr=1568; \
+	 m config2 my_modid=$my_modid; \
+	 port ge$turbo_port speed=2500; \
+	 vlan add 1 pbm=ge$turbo_port ubm=none"
+
+if !$?no_bcm && $?drac_any \
+   "m modport_7_0 port_for_mod1=0xc"
+if !$?no_bcm && $?lynx_any \
+   "m modport_7_0 port_for_mod1=0x1"
+if !$?no_bcm && $?tucana \
+   "stkmode modid=0;"
+if !$?no_bcm && $?tucana && !$?magnum && !$?tucana_nohg \
+   "m modport_7_0 port_for_mod2=0x38; \
+    m imodport_7_0 port_for_mod0=0 port_for_mod1=0 port_for_mod2=0x38; \
+    stkmode modid=0"
+if !$?no_bcm && $?xgs_switch && !$?rcpu_only\
+   "stkmode modid=0; \
+    s CMIC_COS_CTRL_RX CH0_COS_BMP=0,CH1_COS_BMP=0xff, \
+        CH2_COS_BMP=0,CH3_COS_BMP=0"
+
+# Back-to-back Draco setup.
+
+# Draco chips must run at 127MHz. Some older versions
+# are not set to this frequency.
+
+if $?draco_stk && $?unit0 \
+    "i2c probe quiet; bb clock Ref125 127"
+
+# Applies to SDK Baseboard with either internal or external Higigs,
+# as well as the Galahad reference design.
+
+if $?draco_b2b && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if !$?simulator && $?draco_b2b && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_b2b && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Merlin, White Knight, Black Knight setup.
+#	Draco unit 1 is on Herc port 8
+#	Draco unit 2 is on Herc port 1
+
+if $?draco_herc4 && $?unit0 \
+    "w uc.hpic7 0 1 0x0; \
+     w uc.hpic7 1 1 0x2; \
+     w uc.hpic0 0 1 0x100; \
+     w uc.hpic0 1 1 0x0"
+
+if !$?simulator && $?draco_herc4 && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_herc4 && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if $?draco_herc4 && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Lancelot setup
+# (enabled by adding the property "lancelot=1")
+# Notes:
+#	Draco unit 1 is on Herc port 7
+#	Draco unit 2 is on Herc port 8
+#	Draco unit 3 is on Herc port 1
+#	Draco unit 4 is on Herc port 2
+
+if $?lancelot && $?unit0 \
+    "w uc.hpic6 0 1 0x0; \
+     w uc.hpic6 1 1 0x100; \
+     w uc.hpic6 2 1 0x2; \
+     w uc.hpic6 3 1 0x4; \
+     w uc.hpic7 0 1 0x80; \
+     w uc.hpic7 1 1 0x0; \
+     w uc.hpic7 2 1 0x2; \
+     w uc.hpic7 3 1 0x4; \
+     w uc.hpic0 0 1 0x80; \
+     w uc.hpic0 1 1 0x100; \
+     w uc.hpic0 2 1 0x0; \
+     w uc.hpic0 3 1 0x4; \
+     w uc.hpic1 0 1 0x80; \
+     w uc.hpic1 1 1 0x100; \
+     w uc.hpic1 2 1 0x2; \
+     w uc.hpic1 3 1 0x0"
+
+if !$?simulator && $?lancelot && $?unit0 \
+     "i2c probe quiet; bb clock Draco_Core 127"
+
+if $?lancelot && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit3 \
+    "stkmode modid=2; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12"
+
+if $?lancelot && $?unit4 \
+    "stkmode modid=3; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0"
+
+# Lynx SDK (TwoLynx) setup
+# (enabled by adding the property "twolynx=1")
+
+if $?twolynx && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     "
+
+if $?twolynx && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     "
+# HercuLynx setup
+# (enabled by adding the property "herculynx=1")
+# Notes:
+#	Lynx unit 1 is on Herc port 1
+#	Lynx unit 2 is on Herc port 2
+#	Lynx unit 3 is on Herc port 3
+#	Lynx unit 4 is on Herc port 4
+#	Lynx unit 5 is on Herc port 5
+#	Lynx unit 6 is on Herc port 6
+#	Lynx unit 7 is on Herc port 7
+#	Lynx unit 8 is on Herc port 8
+
+if $?herculynx && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x008; \
+     w uc.hpic0 3 1 0x010; \
+     w uc.hpic0 4 1 0x020; \
+     w uc.hpic0 5 1 0x040; \
+     w uc.hpic0 6 1 0x080; \
+     w uc.hpic0 7 1 0x100; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x008; \
+     w uc.hpic1 3 1 0x010; \
+     w uc.hpic1 4 1 0x020; \
+     w uc.hpic1 5 1 0x040; \
+     w uc.hpic1 6 1 0x080; \
+     w uc.hpic1 7 1 0x100; \
+                         ; \
+     w uc.hpic2 0 1 0x002; \
+     w uc.hpic2 1 1 0x004; \
+     w uc.hpic2 2 1 0x008; \
+     w uc.hpic2 3 1 0x010; \
+     w uc.hpic2 4 1 0x020; \
+     w uc.hpic2 5 1 0x040; \
+     w uc.hpic2 6 1 0x080; \
+     w uc.hpic2 7 1 0x100; \
+                         ; \
+     w uc.hpic3 0 1 0x002; \
+     w uc.hpic3 1 1 0x004; \
+     w uc.hpic3 2 1 0x008; \
+     w uc.hpic3 3 1 0x010; \
+     w uc.hpic3 4 1 0x020; \
+     w uc.hpic3 5 1 0x040; \
+     w uc.hpic3 6 1 0x080; \
+     w uc.hpic3 7 1 0x100; \
+                         ; \
+     w uc.hpic4 0 1 0x002; \
+     w uc.hpic4 1 1 0x004; \
+     w uc.hpic4 2 1 0x008; \
+     w uc.hpic4 3 1 0x010; \
+     w uc.hpic4 4 1 0x020; \
+     w uc.hpic4 5 1 0x040; \
+     w uc.hpic4 6 1 0x080; \
+     w uc.hpic4 7 1 0x100; \
+                         ; \
+     w uc.hpic5 0 1 0x002; \
+     w uc.hpic5 1 1 0x004; \
+     w uc.hpic5 2 1 0x008; \
+     w uc.hpic5 3 1 0x010; \
+     w uc.hpic5 4 1 0x020; \
+     w uc.hpic5 5 1 0x040; \
+     w uc.hpic5 6 1 0x080; \
+     w uc.hpic5 7 1 0x100; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x008; \
+     w uc.hpic6 3 1 0x010; \
+     w uc.hpic6 4 1 0x020; \
+     w uc.hpic6 5 1 0x040; \
+     w uc.hpic6 6 1 0x080; \
+     w uc.hpic6 7 1 0x100; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x008; \
+     w uc.hpic7 3 1 0x010; \
+     w uc.hpic7 4 1 0x020; \
+     w uc.hpic7 5 1 0x040; \
+     w uc.hpic7 6 1 0x080; \
+     w uc.hpic7 7 1 0x100; \
+                         ; \
+     "
+
+if $?herculynx && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?herculynx && $?unit1 \
+    "stkmode modid=0"
+
+if $?herculynx && $?unit2 \
+    "stkmode modid=1"
+
+if $?herculynx && $?unit3 \
+    "stkmode modid=2"
+
+if $?herculynx && $?unit4 \
+    "stkmode modid=3"
+
+if $?herculynx && $?unit5 \
+    "stkmode modid=4"
+
+if $?herculynx && $?unit6 \
+    "stkmode modid=5"
+
+if $?herculynx && $?unit7 \
+    "stkmode modid=6"
+
+if $?herculynx && $?unit8 \
+    "stkmode modid=7"
+
+# LynxaLot setup
+# (enabled by adding the property "lynxalot=1")
+# Notes:
+#	Lynx unit 0 is on Herc port 3 (hg2/hpic2) (mod 0)
+#	Lynx unit 1 is on Herc port 4 (hg3/hpic3) (mod 1)
+#	Higig conn 0 is on Herc port 5 (hg4/hpic4)
+#	Higig conn 1 is on Herc port 6 (hg5/hpic5)
+#	Draco unit 3 is on Herc port 7 (hg6/hpic6) (mod 2)
+#	Draco unit 4 is on Herc port 8 (hg7/hpic7) (mod 3)
+#	Draco unit 5 is on Herc port 1 (hg0/hpic0) (mod 4)
+#	Draco unit 6 is on Herc port 2 (hg1/hpic1) (mod 5)
+
+if $?lynxalot && $?unit2 \
+    " \
+     w uc.hpic0 0 1 0x008; \
+     w uc.hpic0 1 1 0x010; \
+     w uc.hpic0 2 1 0x080; \
+     w uc.hpic0 3 1 0x100; \
+     w uc.hpic0 4 1 0x002; \
+     w uc.hpic0 5 1 0x004; \
+                         ; \
+     w uc.hpic1 0 1 0x008; \
+     w uc.hpic1 1 1 0x010; \
+     w uc.hpic1 2 1 0x080; \
+     w uc.hpic1 3 1 0x100; \
+     w uc.hpic1 4 1 0x002; \
+     w uc.hpic1 5 1 0x004; \
+                         ; \
+     w uc.hpic2 0 1 0x008; \
+     w uc.hpic2 1 1 0x010; \
+     w uc.hpic2 2 1 0x080; \
+     w uc.hpic2 3 1 0x100; \
+     w uc.hpic2 4 1 0x002; \
+     w uc.hpic2 5 1 0x004; \
+                         ; \
+     w uc.hpic3 0 1 0x008; \
+     w uc.hpic3 1 1 0x010; \
+     w uc.hpic3 2 1 0x080; \
+     w uc.hpic3 3 1 0x100; \
+     w uc.hpic3 4 1 0x002; \
+     w uc.hpic3 5 1 0x004; \
+                         ; \
+     w uc.hpic6 0 1 0x008; \
+     w uc.hpic6 1 1 0x010; \
+     w uc.hpic6 2 1 0x080; \
+     w uc.hpic6 3 1 0x100; \
+     w uc.hpic6 4 1 0x002; \
+     w uc.hpic6 5 1 0x004; \
+                         ; \
+     w uc.hpic7 0 1 0x008; \
+     w uc.hpic7 1 1 0x010; \
+     w uc.hpic7 2 1 0x080; \
+     w uc.hpic7 3 1 0x100; \
+     w uc.hpic7 4 1 0x002; \
+     w uc.hpic7 5 1 0x004; \
+                         ; \
+     "
+
+if $?lynxalot && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?lynxalot && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?lynxalot && $?unit0 \
+    "stkmode modid=0"
+     
+if $?lynxalot && $?unit1 \
+    "stkmode modid=1"
+
+if $?lynxalot && $?unit3 \
+    "stkmode modid=2"
+
+if $?lynxalot && $?unit4 \
+    "stkmode modid=3"
+
+if $?lynxalot && $?unit5 \
+    "stkmode modid=4"
+
+if $?lynxalot && $?unit6 \
+    "stkmode modid=5"
+
+# guenevere setup
+# (enabled by adding the property "guenevere=1")
+# Notes:
+#       hgX mapping based on pbmp_valid.0=0x1b7
+#	Draco unit 1 is on Herc port 1 (hg0/hpic0) (mod 0)
+#	Draco unit 2 is on Herc port 2 (hg1/hpic1) (mod 1)
+#	Lynx unit 3 is on Herc port 8 (hg5/hpic7) (mod 2)
+#	Lynx unit 4 is on Herc port 7 (hg4/hpic6) (mod 3)
+#	Higig conn 0 is on Herc port 4 (hg2/hpic3)
+#	Higig conn 1 is on Herc port 5 (hg3/hpic4)
+#       Herc port 3 - Unused (hpic2)
+#       Herc port 6 - Unused (hpic5)
+if $?guenevere && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x100; \
+     w uc.hpic0 3 1 0x080; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x100; \
+     w uc.hpic1 3 1 0x080; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x100; \
+     w uc.hpic7 3 1 0x080; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x100; \
+     w uc.hpic6 3 1 0x080; \
+                         ; \
+     "
+
+if $?guenevere && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?guenevere && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?guenevere && $?unit1 \
+    "stkmode modid=0"
+     
+if $?guenevere && $?unit2 \
+    "stkmode modid=1"
+
+if $?guenevere && $?unit3 \
+    "stkmode modid=2"
+
+if $?guenevere && $?unit4 \
+    "stkmode modid=3"
+     
+# felix48 setup
+# (enabled by adding the property "felix48=1")
+# Notes:
+#       BCM56102 unit-0 higig port (port 26) is connected
+#       to BCM56102 Unit-1 higig port (port 26)
+#
+
+if $?felix48 && $?unit0 \
+    "stkmode modid=0 ; \
+     m IEGR_PORT MY_MODID=0; \
+     m XPORT_CONFIG MY_MODID=0; \
+     w MODPORT_MAP 1 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+
+if $?felix48 && $?unit1 \
+    "stkmode modid=1 ; \
+     m IEGR_PORT MY_MODID=1; \
+     m XPORT_CONFIG MY_MODID=1; \
+     w MODPORT_MAP 0 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+# fbpoe setup
+# (enabled by adding the property "fbpoe=1")
+# Notes:
+#       BCM56504 unit-0 higig port (port 27,28) is connected
+#       to BCM56504 Unit-1 higig port (port 27,28)
+#
+
+if $?unit0 && $?firebolt_any && $?fbpoe     \
+  "stkmode modid=0;           \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+if $?unit1 && $?firebolt_any && $?fbpoe \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+# Dual Raptor/Raven boards
+if $?raven_eb_48p || $?rap24_ref \
+    "local rcpu_system 1"
+if $?unit0 && $?rcpu_system \
+   "stkmode modid=0"
+if $?unit1 && $?rcpu_system \
+   "stkmode modid=1"
+
+# LM fb48 platform setup
+# (enabled by adding the property "lm48p=1")
+#
+if $?unit0 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=0"
+
+if $?unit1 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=1"
+
+# Set Firebolt POE power level 170(total) - 110(switch) = 60
+if $?fbpoe \
+        "local poepower 60"
+
+# Set Draco15 POE power level 170(total) - 80(switch) = 90
+if $?drac15\
+        "local poepower 90"
+
+# Hurricane3 BCM956160R setup
+# Notes:
+#       BCM56160 unit-0 higig port (port 29,30) is connected
+#       to BCM56160 Unit-1 higig port (port 26,27)
+#
+
+if $?bcm956160r && $?unit0  \
+  "stkmode modid=0; \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x60000000; \
+   trunk add id=128 r=3 pbm=hg0-hg1"
+
+if $?bcm956160r && $?unit1  \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0xc000000; \
+   trunk add id=128 r=3 pbm=hg0-hg1"
+
+# if enable_poe is set, then enable the POE processor for
+# either Firebolt or Draco15 platform
+if $?unit0 && $?enable_poe && $?fbpoe || $?drac15 \
+        "$echo rc: Enabling POE ...; \
+         poesel reset; \
+         i2c probe quiet; \
+         xpoe verbose off; \
+         xpoe power $poepower; \
+         xpoe verbose on; \
+         poesel enable"
+
+# mark this unit so that subsequent rc runs are quiet
+setenv rc$unit 1
+
+if $?macsec '\
+    macsec sync; \
+    $echo "rc: MACSEC CLI Enabled"'
+
+# cache a copy of rc.soc in memory
+rccache addq rc.soc
+
+# setup chassis if requested
+if !"expr $?autochassis2 && $unit == $units - 1" \
+    "setenv chassis2_no_rc 1; \
+     rcload c2switch.soc; \
+     setenv chassis2_no_rc; \
+    "
+
+# start stacking if requested
+if !"expr $?autostack && $unit == $units - 1" \
+	"rcload stk.soc"
+
+if !"expr $?aedev + 0" && !"expr $unit == $units - 1" \
+       "aedev init"
+
+# hurricane 48p FE platform LED setup for 56146_A0 and 56147_A0 board
+# (enabled by adding the property "fe_hu_48p=1")
+#
+if $?fe_hu_48p && $?BCM56146 || $?BCM56147 \
+    "phy fe0 0x1f 0x008b; \
+     phy fe0 0x1a 0x3f09;\
+     phy fe8 0x1f 0x008b; \
+     phy fe8 0x1a 0x3f09; \
+     phy fe16 0x1f 0x008b; \
+     phy fe16 0x1a 0x3f09"
+
+# enable LED matrix mode for PHY54292 on BCM953411K/R
+if $?bcm953411 \
+    "rcload gh_bcm953411x.soc"
+
+if $?simulator \
+    'echo -n "Chip init finishes at: ";date'
+    
+    
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/readme.txt b/bal_release/3rdparty/bcm-sdk/rc/qax/readme.txt
new file mode 100644
index 0000000..93b40db
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/readme.txt
@@ -0,0 +1,19 @@
+This directory contains bcm files that are needed in the QAX svk file system to bring up 
+the BCM Diag Shell.
+User should also copy the bcm.user linux-kernel-bde.ko and linux-user-bde.ko
+from the Jenkins BAL WRX build or private bcm_sdk build to the same QAX svk file system.
+!!!
+   Do not forget to change the IP in rpc.soc to point it to the BAL_CORE
+!!!
+The currently supported bcm_sdk version is 6.5.4
+.
+|-- bcm88470_board.soc
+|-- combo28_dram.soc
+|-- config.bcm
+|-- init.sh
+|-- qax.soc
+|-- rc.soc
+`-- rpc.soc
+ 
+  
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/reload.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/reload.soc
new file mode 100644
index 0000000..f48a50e
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/reload.soc
@@ -0,0 +1,8 @@
+#
+# $Id: reload-dune.soc,v 1.1 2011/12/13 15:37:13 assaf Exp $
+#
+# $Copyright: (c) 2006 Broadcom Corp.
+# All Rights Reserved.$
+
+setenv warmboot 1
+rcload rc.soc
diff --git a/bal_release/3rdparty/bcm-sdk/rc/qax/rpc.soc b/bal_release/3rdparty/bcm-sdk/rc/qax/rpc.soc
new file mode 100644
index 0000000..b20b75c
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/qax/rpc.soc
@@ -0,0 +1,35 @@
+cpudb newdb
+
+cpudb add key=0x1
+
+cpudb add key=0x2 local=t
+
+cts atp trans sock server start
+
+cts atp cos=0 vlan=1
+
+cte reg mode=atp
+
+# NOTE: You must un-comment the line below and replace the IP address (10.10.10.10) with
+#       the value that matches your system.  The IP address must be the address of the linux
+#       instance where you run your bcm_bal or bcm_sdn_agent
+#
+#cts atp trans sock inst dk=0x1 dip=10.10.10.10
+
+rpc nonexthop
+
+rpc start
+
+# NOTE: To enable CPU packet send and receive (i.e. PacketOut and PacketIn for SDN),
+#       you must un-comment the lines below and replace the IP address (10.10.10.10) and port with
+#       the values that match your system.  The IP address must be the address of the linux
+#       instance where you run your bcm_bal or bcm_sdn_agent, and the port must match the values used
+#       in your bal_config.ini file
+#       (i.e. The trap_target port number here must match trap_udp_port in bal_config.ini, and the 
+#        trap_receive port here must match pkt_send_svr_listen_port in bal_config.ini)
+
+#
+#bal trap_target 10.10.10.10:50001
+
+#bal trap_receive 10.10.10.10:50002
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/bcm88470_board.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/bcm88470_board.soc
new file mode 100644
index 0000000..b944270
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/bcm88470_board.soc
@@ -0,0 +1,211 @@
+# $Id:
+# $Copyright: (c) 1998-2001 Broadcom Corp.
+# All Rights Reserved.$
+#
+
+# Dram dq swaps for BCM88470
+
+#Dram HW properties
+
+#RX polarity
+config add phy_rx_polarity_flip.BCM88470=0
+
+
+#TX polarity
+config add phy_tx_polarity_flip.BCM88470=0
+
+#rx lane swap
+config add phy_rx_lane_map.BCM88470=0x3210
+config add phy_rx_lane_map_quad0.BCM88470=0x3210
+config add phy_rx_lane_map_quad1.BCM88470=0x3210
+config add phy_rx_lane_map_quad2.BCM88470=0x3210
+config add phy_rx_lane_map_quad3.BCM88470=0x3210
+config add phy_rx_lane_map_quad4.BCM88470=0x3210
+config add phy_rx_lane_map_quad5.BCM88470=0x3210
+config add phy_rx_lane_map_quad6.BCM88470=0x3210
+config add phy_rx_lane_map_quad7.BCM88470=0x3210
+config add phy_rx_lane_map_quad8.BCM88470=0x3210
+config add phy_rx_lane_map_quad9.BCM88470=0x3210
+config add phy_rx_lane_map_quad10.BCM88470=0x3120
+config add phy_rx_lane_map_quad11.BCM88470=0x3210
+
+
+#tx lane swap
+config add phy_tx_lane_map.BCM88470=0x3210
+config add phy_tx_lane_map_quad0.BCM88470=0x3210
+config add phy_tx_lane_map_quad1.BCM88470=0x3210
+config add phy_tx_lane_map_quad2.BCM88470=0x3210
+config add phy_tx_lane_map_quad3.BCM88470=0x3210
+config add phy_tx_lane_map_quad4.BCM88470=0x3210
+config add phy_tx_lane_map_quad5.BCM88470=0x3210
+config add phy_tx_lane_map_quad6.BCM88470=0x3210
+config add phy_tx_lane_map_quad7.BCM88470=0x3210
+config add phy_tx_lane_map_quad8.BCM88470=0x3210
+config add phy_tx_lane_map_quad9.BCM88470=0x3210
+config add phy_tx_lane_map_quad10.BCM88470=0x3120
+config add phy_tx_lane_map_quad11.BCM88470=0x3210
+
+# Dram dq swaps for BCM88470
+config add ext_ram_dq_swap_dram0_byte0_bit0.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte0_bit1.BCM88470=0
+config add ext_ram_dq_swap_dram0_byte0_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte0_bit3.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte0_bit4.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte0_bit5.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte0_bit6.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte0_bit7.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte1_bit0.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte1_bit1.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte1_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte1_bit3.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte1_bit4.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte1_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram0_byte1_bit6.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte1_bit7.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte2_bit0.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte2_bit1.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte2_bit2.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte2_bit3.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte2_bit4.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte2_bit5.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte2_bit6.BCM88470=0
+config add ext_ram_dq_swap_dram0_byte2_bit7.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte3_bit0.BCM88470=3
+config add ext_ram_dq_swap_dram0_byte3_bit1.BCM88470=2
+config add ext_ram_dq_swap_dram0_byte3_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram0_byte3_bit3.BCM88470=7
+config add ext_ram_dq_swap_dram0_byte3_bit4.BCM88470=6
+config add ext_ram_dq_swap_dram0_byte3_bit5.BCM88470=1
+config add ext_ram_dq_swap_dram0_byte3_bit6.BCM88470=4
+config add ext_ram_dq_swap_dram0_byte3_bit7.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte0_bit0.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte0_bit1.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte0_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte0_bit3.BCM88470=3
+config add ext_ram_dq_swap_dram1_byte0_bit4.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte0_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte0_bit6.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte0_bit7.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte1_bit0.BCM88470=3
+config add ext_ram_dq_swap_dram1_byte1_bit1.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte1_bit2.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte1_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte1_bit4.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte1_bit5.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte1_bit6.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte1_bit7.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte2_bit0.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte2_bit1.BCM88470=3
+config add ext_ram_dq_swap_dram1_byte2_bit2.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte2_bit3.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte2_bit4.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte2_bit5.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte2_bit6.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte2_bit7.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte3_bit0.BCM88470=2
+config add ext_ram_dq_swap_dram1_byte3_bit1.BCM88470=6
+config add ext_ram_dq_swap_dram1_byte3_bit2.BCM88470=1
+config add ext_ram_dq_swap_dram1_byte3_bit3.BCM88470=7
+config add ext_ram_dq_swap_dram1_byte3_bit4.BCM88470=4
+config add ext_ram_dq_swap_dram1_byte3_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram1_byte3_bit6.BCM88470=5
+config add ext_ram_dq_swap_dram1_byte3_bit7.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte0_bit0.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte0_bit1.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte0_bit2.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte0_bit3.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte0_bit4.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte0_bit5.BCM88470=1
+config add ext_ram_dq_swap_dram2_byte0_bit6.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte0_bit7.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte1_bit0.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte1_bit1.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte1_bit2.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte1_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte1_bit4.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte1_bit5.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte1_bit6.BCM88470=1
+config add ext_ram_dq_swap_dram2_byte1_bit7.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte2_bit0.BCM88470=1
+config add ext_ram_dq_swap_dram2_byte2_bit1.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte2_bit2.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte2_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte2_bit4.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte2_bit5.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte2_bit6.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte2_bit7.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte3_bit0.BCM88470=0
+config add ext_ram_dq_swap_dram2_byte3_bit1.BCM88470=7
+config add ext_ram_dq_swap_dram2_byte3_bit2.BCM88470=4
+config add ext_ram_dq_swap_dram2_byte3_bit3.BCM88470=6
+config add ext_ram_dq_swap_dram2_byte3_bit4.BCM88470=2
+config add ext_ram_dq_swap_dram2_byte3_bit5.BCM88470=5
+config add ext_ram_dq_swap_dram2_byte3_bit6.BCM88470=3
+config add ext_ram_dq_swap_dram2_byte3_bit7.BCM88470=1
+
+# Dram bank addr swaps for BCM88470
+config add ext_ram_addr_bank_swap_dram0_bit7.BCM88470=4
+config add ext_ram_addr_bank_swap_dram0_bit11.BCM88470=5
+config add ext_ram_addr_bank_swap_dram0_bit13.BCM88470=15
+config add ext_ram_addr_bank_swap_dram0_bit14.BCM88470=17
+config add ext_ram_addr_bank_swap_dram0_bit5.BCM88470=6
+config add ext_ram_addr_bank_swap_dram0_bit0.BCM88470=7
+config add ext_ram_addr_bank_swap_dram0_bit8.BCM88470=8
+config add ext_ram_addr_bank_swap_dram0_bit1.BCM88470=9
+config add ext_ram_addr_bank_swap_dram0_bit4.BCM88470=10
+config add ext_ram_addr_bank_swap_dram0_bit16.BCM88470=11
+config add ext_ram_addr_bank_swap_dram0_bit15.BCM88470=12
+config add ext_ram_addr_bank_swap_dram0_bit12.BCM88470=13
+config add ext_ram_addr_bank_swap_dram0_bit6.BCM88470=0
+config add ext_ram_addr_bank_swap_dram0_bit2.BCM88470=1
+config add ext_ram_addr_bank_swap_dram0_bit9.BCM88470=2
+config add ext_ram_addr_bank_swap_dram0_bit10.BCM88470=14
+config add ext_ram_addr_bank_swap_dram0_bit17.BCM88470=16
+config add ext_ram_addr_bank_swap_dram1_bit10.BCM88470=4
+config add ext_ram_addr_bank_swap_dram1_bit14.BCM88470=5
+config add ext_ram_addr_bank_swap_dram1_bit7.BCM88470=15
+config add ext_ram_addr_bank_swap_dram1_bit12.BCM88470=17
+config add ext_ram_addr_bank_swap_dram1_bit4.BCM88470=6
+config add ext_ram_addr_bank_swap_dram1_bit6.BCM88470=7
+config add ext_ram_addr_bank_swap_dram1_bit9.BCM88470=8
+config add ext_ram_addr_bank_swap_dram1_bit1.BCM88470=9
+config add ext_ram_addr_bank_swap_dram1_bit5.BCM88470=10
+config add ext_ram_addr_bank_swap_dram1_bit11.BCM88470=11
+config add ext_ram_addr_bank_swap_dram1_bit8.BCM88470=12
+config add ext_ram_addr_bank_swap_dram1_bit13.BCM88470=13
+config add ext_ram_addr_bank_swap_dram1_bit0.BCM88470=0
+config add ext_ram_addr_bank_swap_dram1_bit15.BCM88470=1
+config add ext_ram_addr_bank_swap_dram1_bit2.BCM88470=2
+config add ext_ram_addr_bank_swap_dram1_bit17.BCM88470=14
+config add ext_ram_addr_bank_swap_dram1_bit16.BCM88470=16
+config add ext_ram_addr_bank_swap_dram2_bit15.BCM88470=4
+config add ext_ram_addr_bank_swap_dram2_bit5.BCM88470=5
+config add ext_ram_addr_bank_swap_dram2_bit11.BCM88470=15
+config add ext_ram_addr_bank_swap_dram2_bit7.BCM88470=17
+config add ext_ram_addr_bank_swap_dram2_bit17.BCM88470=6
+config add ext_ram_addr_bank_swap_dram2_bit0.BCM88470=7
+config add ext_ram_addr_bank_swap_dram2_bit16.BCM88470=8
+config add ext_ram_addr_bank_swap_dram2_bit2.BCM88470=9
+config add ext_ram_addr_bank_swap_dram2_bit13.BCM88470=10
+config add ext_ram_addr_bank_swap_dram2_bit9.BCM88470=11
+config add ext_ram_addr_bank_swap_dram2_bit12.BCM88470=12
+config add ext_ram_addr_bank_swap_dram2_bit6.BCM88470=13
+config add ext_ram_addr_bank_swap_dram2_bit14.BCM88470=0
+config add ext_ram_addr_bank_swap_dram2_bit8.BCM88470=1
+config add ext_ram_addr_bank_swap_dram2_bit1.BCM88470=2
+config add ext_ram_addr_bank_swap_dram2_bit4.BCM88470=14
+config add ext_ram_addr_bank_swap_dram2_bit10.BCM88470=16
+
+##Dram HW properties
+config add ext_ram_present.BCM88470=3
+config add dram_type_DDR4_MICRON_Y4016AABG_JD_F_4GBIT=1
+config add ext_ram_freq.BCM88470=1600
+config add ext_ram_abi.BCM88470=0
+config add ext_ram_write_dbi.BCM88470=0
+config add ext_ram_read_dbi.BCM88470=0
+config add ext_ram_write_crc.BCM88470=0
+config add ext_ram_read_crc.BCM88470=0
+config add ext_ram_cmd_par_latency.BCM88470=6
+config add ext_ram_type.BCM88470=DDR4
+config add ext_ram_total_size.BCM88470=3000
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/combo28_dram.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/combo28_dram.soc
new file mode 100644
index 0000000..d47c1f5
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/combo28_dram.soc
@@ -0,0 +1,560 @@
+#
+# $Id: combo28_dram.soc,v 1.0 2014/04/28 15:50:00 nhefetz Exp $
+#
+# $Copyright: (c) 2014 Broadcom Corporation
+# All Rights Reserved.$
+#
+
+#################### General Notes ########################
+# Our controller support both DDR4 and GDDR5, we need to "modify" ext_ram_columns in the following way:
+#   For DDR4, need to use column number as in DRAM Data Sheet, meaning 1024 in drams supported.
+#   For GDDR5, need to multiply number in Data Sheet by 8 (representing the 3 address bits, which are constant 000 in DDR4.), meaning 512 in drams supported.
+
+
+if $?dram_type_DDR4_SAMSUNG_K4A4G165WD_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=45320;\
+  config add ext_ram_t_rcd_wr=13320;\
+  config add ext_ram_t_rcd_rd=13320;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=13320;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=10c;\\
+  config add ext_ram_t_ccd_l=6c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_c_cas_latency=17c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+if $?dram_type_DDR4_MICRON_EDY4016AABG_DRFR_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=45320;\
+  config add ext_ram_t_rcd_wr=13320;\
+  config add ext_ram_t_rcd_rd=13320;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=13320;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=10c;\\
+  config add ext_ram_t_ccd_l=6c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_c_cas_latency=16c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+########################################################################
+# Note: Not for new design not recommended to be used and not supported
+########################################################################
+if $?dram_type_DDR4_MICRON_MT40A256M16HA_083EA_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=47000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=15000;\
+  config add ext_ram_t_rrd_l=11c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=15000;\
+  config add ext_ram_t_wr=14900;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=12c;\
+  config add ext_ram_t_rtp_l=12c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=12c;\\
+  config add ext_ram_t_ccd_l=8c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=170c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=18c;\
+  config add ext_ram_c_cas_latency=24c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+########################################################################
+# Note: Not for new design not recommended to be used and not supported
+########################################################################
+if $?dram_type_DDR4_MICRON_MT40A512M16_8GBIT "\
+    config add ext_ram_type=DDR4; \
+    config add ext_ram_t_rfc=350000;\
+    config add ext_ram_t_rc=45320;\
+    config add ext_ram_t_rcd_wr=13320;\
+    config add ext_ram_t_rcd_rd=13320;\
+    config add ext_ram_t_rrd_l=8c;\
+    config add ext_ram_t_rrd_s=7c;\
+    config add ext_ram_t_ras=32000;\
+    config add ext_ram_t_wr=15000;\
+    config add ext_ram_t_faw=30000;\
+    config add ext_ram_t_rtp_s=10c;\
+    config add ext_ram_t_rtp_l=10c;\
+    config add ext_ram_t_wtr_s=4c;\\
+    config add ext_ram_t_wtr_l=10c;\
+    config add ext_ram_t_ccd_l=8c;\
+    config add ext_ram_t_ccd_s=4c;\
+    config add ext_ram_t_zqcs=128c;\
+    config add ext_ram_t_crc_alert=13000;\
+    config add ext_ram_t_rst=500000000;\
+    config add ext_ram_t_ref=3900000;\
+    config add ext_ram_c_wr_latency=12c;\
+    config add ext_ram_c_cas_latency=16c;\
+    config add ext_ram_t_al=0;\
+    config add ext_ram_columns=1024; \
+    config add ext_ram_rows=65536; \
+    config add ext_ram_t_rp=13320;\
+    config add ext_ram_banks=8;"
+
+if $?dram_type_DDR4_HYNIX_H5AN4G6NMFR_VJC_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=45320;\
+  config add ext_ram_t_rcd_wr=13320;\
+  config add ext_ram_t_rcd_rd=13320;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=4c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=13320;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=7500;\
+  config add ext_ram_t_rtp_l=7500;\
+  config add ext_ram_t_wtr_s=2500;\
+  config add ext_ram_t_wtr_l=7500;\
+  config add ext_ram_t_ccd_l=8c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_crc_wr_latency=12c;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=16c;\
+  config add ext_ram_c_cas_latency=20c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+if $?dram_type_DDR4_MICRON_Y4016AABG_JD_F_4GBIT "\
+  config add ext_ram_type=DDR4; \
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=47000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=15000;\
+  config add ext_ram_t_rrd_l=11c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=15000;\
+  config add ext_ram_t_wr=14900;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=12c;\
+  config add ext_ram_t_rtp_l=12c;\
+  config add ext_ram_t_wtr_s=4c;\\
+  config add ext_ram_t_wtr_l=12c;\\
+  config add ext_ram_t_ccd_l=8c;\\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=170c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=16c;\
+  config add ext_ram_c_cas_latency=24c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024; \
+  config add ext_ram_rows=32768; \
+  config add ext_ram_banks=8;"
+
+if $?dram_type_GDDR5_SAMSUNG_K4G20325FD_2GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=78000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=16000;\
+  config add ext_ram_t_rrd_l=6000;\
+  config add ext_ram_t_rrd_s=6000;\
+  config add ext_ram_t_ras=34000;\
+  config add ext_ram_t_rp=14000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=24000;\
+  config add ext_ram_t_32aw=192000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=4c;\
+  config add ext_ram_t_wtr_s=8c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=3c;\
+  config add ext_ram_c_cas_latency=20c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=14c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=8192; \
+  config add ext_ram_banks=16;"
+
+########################################################################
+# Note: Not for new design not recommended to be used and not supported
+########################################################################
+if $?dram_type_GDDR5_SAMSUNG_K4G41325FC_4GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=110000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=16000;\
+  config add ext_ram_t_rrd_l=6000;\
+  config add ext_ram_t_rrd_s=6000;\
+  config add ext_ram_t_ras=34000;\
+  config add ext_ram_t_rp=14000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=24000;\
+  config add ext_ram_t_32aw=192000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=4c;\
+  config add ext_ram_t_wtr_s=8c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=3c;\
+  config add ext_ram_c_cas_latency=20c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=14c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_banks=16;"
+
+#if $?dram_type_GDDR5_HYNIX_H5GQ2H24AFR_R0C_2GBIT "\
+#  config add ext_ram_type=GDDR5; \
+#  config add ext_ram_t_rfc=120000;\
+#  config add ext_ram_t_rc=48000;\
+#  config add ext_ram_t_rcd_wr=14000;\
+#  config add ext_ram_t_rcd_rd=18000;\
+#  config add ext_ram_t_rrd_l=9c;\
+#  config add ext_ram_t_rrd_s=9c;\
+#  config add ext_ram_t_ras=32000;\
+#  config add ext_ram_t_rp=16000;\
+#  config add ext_ram_t_wr=16000;\
+#  config add ext_ram_t_faw=30000;\
+#  config add ext_ram_t_32aw=245000;\
+#  config add ext_ram_t_rtp_s=2c;\
+#  config add ext_ram_t_rtp_l=2c;\
+#  config add ext_ram_t_wtr_s=8c;\
+#  config add ext_ram_t_wtr_l=8c;\
+#  config add ext_ram_t_ccd_l=3c;\
+#  config add ext_ram_t_ccd_s=2c;\
+#  config add ext_ram_t_ref=3900000;\
+#  config add ext_ram_c_wr_latency=3c;\
+#  config add ext_ram_c_cas_latency=16c;\
+#  config add ext_ram_t_crc_rd_latency=2c;\
+#  config add ext_ram_t_crc_wr_latency=11c;\
+#  config add ext_ram_t_rst=200000000;\
+#  config add ext_ram_t_al=1c;\
+#  config add ext_ram_columns=512; \
+#  config add ext_ram_rows=8192; \
+#  config add ext_ram_banks=16;"
+#
+
+###################################################
+#     ELPIDA GDDR5
+###################################################
+if $?dram_type_GDDR5_MICRON_EDW4032CABG_4GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=90000;\
+  config add ext_ram_t_rc=44000;\
+  config add ext_ram_t_rcd_wr=13000;\
+  config add ext_ram_t_rcd_rd=17000;\
+  config add ext_ram_t_rrd_l=5000;\
+  config add ext_ram_t_rrd_s=5000;\
+  config add ext_ram_t_ras=27000;\
+  config add ext_ram_t_rp=17000;\
+  config add ext_ram_t_wr=18000;\
+  config add ext_ram_t_faw=20000;\
+  config add ext_ram_t_32aw=160000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=2c;\
+  config add ext_ram_t_wtr_s=7c;\
+  config add ext_ram_t_wtr_l=7c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=4c;\
+  config add ext_ram_c_cas_latency=18c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=11c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=2c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_banks=16;"
+
+if $?dram_type_GDDR5_HYNIX_H5GC4H24MFR_T2C_4GBIT "\
+  config add ext_ram_type=GDDR5; \
+  config add ext_ram_t_rfc=120000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=14000;\
+  config add ext_ram_t_rcd_rd=18000;\
+  config add ext_ram_t_rrd_l=9c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=16000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_32aw=245000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=2c;\
+  config add ext_ram_t_wtr_s=8c;\
+  config add ext_ram_t_wtr_l=8c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=4c;\
+  config add ext_ram_c_cas_latency=18c;\
+  config add ext_ram_t_crc_rd_latency=2c;\
+  config add ext_ram_t_crc_wr_latency=13c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512; \
+  config add ext_ram_rows=16384; \
+  config add ext_ram_banks=16;"
+
+###############################################################################################
+# Note: For extended devices for example Micron dram_type_DDR4_MICRON_MT40A256M16HA_083E
+#       please use none extended parameters for example dram_type_DDR4_MICRON_MT40A256M16HA_083
+###############################################################################################
+if $?dram_type_DDR4_MICRON_MT40A256M16HA_083_4GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1200;\
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=46160;\
+  config add ext_ram_t_rcd_wr=14160;\
+  config add ext_ram_t_rcd_rd=14160;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=14160;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=6c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=32768;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=5;\
+  config add ext_ram_c_cas_latency=17c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_MICRON_MT40A256M16HA_083_4GBIT "\
+  config add ext_ram_c_cas_latency=20c;"
+
+if $?dram_type_DDR4_MICRON_MT40A512M16HA_083_8GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1200;\
+  config add ext_ram_t_rfc=350000;\
+  config add ext_ram_t_rc=46160;\
+  config add ext_ram_t_rcd_wr=14160;\
+  config add ext_ram_t_rcd_rd=14160;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=14160;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=6c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=65536;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=5;\
+  config add ext_ram_c_cas_latency=17c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_MICRON_MT40A512M16HA_083_8GBIT "\
+  config add ext_ram_c_cas_latency=20c;"
+
+if $?dram_type_DDR4_MICRON_MT40A256M16GE_062_4GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1600;\
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=47000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=15000;\
+  config add ext_ram_t_rrd_l=11c;\
+  config add ext_ram_t_rrd_s=9c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=15000;\
+  config add ext_ram_t_wr=14900;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=12c;\
+  config add ext_ram_t_rtp_l=12c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=12c;\
+  config add ext_ram_t_ccd_l=8c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=170c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=16c;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=32768;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=8;\
+  config add ext_ram_c_cas_latency=24c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_MICRON_MT40A256M16GE_062_4GBIT "\
+  config add ext_ram_c_cas_latency=28c;"
+
+if $?dram_type_DDR4_SAMSUNG_K4A4G165WE_4GBIT "\
+  config add ext_ram_type=DDR4;\
+  config add ext_ram_freq=1200;\
+  config add ext_ram_t_rfc=260000;\
+  config add ext_ram_t_rc=46160;\
+  config add ext_ram_t_rcd_wr=14160;\
+  config add ext_ram_t_rcd_rd=14160;\
+  config add ext_ram_t_rrd_l=8c;\
+  config add ext_ram_t_rrd_s=7c;\
+  config add ext_ram_t_ras=32000;\
+  config add ext_ram_t_rp=14160;\
+  config add ext_ram_t_wr=15000;\
+  config add ext_ram_t_faw=30000;\
+  config add ext_ram_t_rtp_s=10c;\
+  config add ext_ram_t_rtp_l=10c;\
+  config add ext_ram_t_wtr_s=4c;\
+  config add ext_ram_t_wtr_l=10c;\
+  config add ext_ram_t_ccd_l=6c;\
+  config add ext_ram_t_ccd_s=4c;\
+  config add ext_ram_t_zqcs=128c;\
+  config add ext_ram_t_crc_alert=13000;\
+  config add ext_ram_t_rst=500000000;\
+  config add ext_ram_t_ref=3900000;\
+  config add ext_ram_c_wr_latency=12c ;\
+  config add ext_ram_t_al=0;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=32768;\
+  config add ext_ram_banks=8;\
+  config delete ext_ram_cmd_par_latency*;\
+  config add ext_ram_cmd_par_latency=5;\
+  config add ext_ram_c_cas_latency=17c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_DDR4_SAMSUNG_K4A4G165WE_4GBIT "\
+  config add ext_ram_c_cas_latency=20c;"
+
+if $?dram_type_GDDR5_MICRON_MT51K256M32HF_50_8GBIT "\
+  config add ext_ram_type=GDDR5;\
+  config add ext_ram_t_rfc=110000;\
+  config add ext_ram_t_rc=44000;\
+  config add ext_ram_t_rcd_wr=12000;\
+  config add ext_ram_t_rcd_rd=17000;\
+  config add ext_ram_t_rrd_l=5000;\
+  config add ext_ram_t_rrd_s=5000;\
+  config add ext_ram_t_ras=27000;\
+  config add ext_ram_t_rp=17000;\
+  config add ext_ram_t_wr=18000;\
+  config add ext_ram_t_faw=20000;\
+  config add ext_ram_t_32aw=160000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=2c;\
+  config add ext_ram_t_wtr_s=6c;\
+  config add ext_ram_t_wtr_l=6c;\
+  config add ext_ram_t_ccd_l=2c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=4c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=11c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=2c;\
+  config add ext_ram_columns=1024;\
+  config add ext_ram_rows=16384;\
+  config add ext_ram_banks=16;\
+  config add ext_ram_c_cas_latency=16c;"
+expr $ext_ram_write_dbi==1
+if $? && $?dram_type_GDDR5_MICRON_MT51K256M32HF_50_8GBIT "\
+  config add ext_ram_c_cas_latency=16c;"
+
+if $?dram_type_GDDR5_SAMSUNG_K4G41325FE_HC28_4GBIT "\
+  config add ext_ram_type=GDDR5;\
+  config add ext_ram_t_rfc=110000;\
+  config add ext_ram_t_rc=48000;\
+  config add ext_ram_t_rcd_wr=15000;\
+  config add ext_ram_t_rcd_rd=16000;\
+  config add ext_ram_t_rrd_l=6000;\
+  config add ext_ram_t_rrd_s=6000;\
+  config add ext_ram_t_ras=34000;\
+  config add ext_ram_t_rp=14000;\
+  config add ext_ram_t_wr=16000;\
+  config add ext_ram_t_faw=24000;\
+  config add ext_ram_t_32aw=192000;\
+  config add ext_ram_t_rtp_s=2c;\
+  config add ext_ram_t_rtp_l=4c;\
+  config add ext_ram_t_wtr_s=3c;\
+  config add ext_ram_t_wtr_l=8c;\
+  config add ext_ram_t_ccd_l=3c;\
+  config add ext_ram_t_ccd_s=2c;\
+  config add ext_ram_t_ref=1900000;\
+  config add ext_ram_c_wr_latency=3c;\
+  config add ext_ram_t_crc_rd_latency=3c;\
+  config add ext_ram_t_crc_wr_latency=14c;\
+  config add ext_ram_t_rst=200000000;\
+  config add ext_ram_t_al=1c;\
+  config add ext_ram_columns=512;\
+  config add ext_ram_rows=16384;\
+  config add ext_ram_banks=16;\
+  config add ext_ram_c_cas_latency=18c;"
+expr $ext_ram_write_dbi+0 == 1
+if $? && $?dram_type_GDDR5_SAMSUNG_K4G41325FE_HC28_4GBIT "\
+  config add ext_ram_c_cas_latency=19c;"
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/config.bcm b/bal_release/3rdparty/bcm-sdk/rc/svk4/config.bcm
new file mode 100644
index 0000000..4878c2d
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/config.bcm
@@ -0,0 +1,2912 @@
+#
+# $Id: config-sand.bcm,v 1.140 2013/09/22 14:29:47 tomerma Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+
+#pci_override_dev.0=0x8375
+
+# Note: comment size is restricted to 128 charecters per line.
+
+#########################################
+##cfg for BCM88640 (PetraB), BCM88650 (Arad) and BCM88202 (Ardon)
+#########################################
+
+## temporary suppressing unknown soc properties warnings - till adding them unknown to property.h/propgen
+## (need to be the first soc property in the file).
+suppress_unknown_prop_warnings=1
+
+
+## Multi device system (Negev): 2 devices, fabric mode is FE, mod id is slot id
+## (Top line card is 0, button is 1).
+#diag_chassis=1
+
+## Disable diag init application. Should be used if one wants to run his own
+## application instead of the diag init example
+#diag_disable=1
+
+## Skip cosq configuration in diag_init
+#diag_cosq_disable=1
+#
+
+stack_enable.BCM88680=1
+tdma_timeout_usec.BCM88680=3000000
+tslam_timeout_usec.BCM88680=3000000
+diag_emulator_partial_init.BCM88680=0
+phy_simul.BCM88680=0
+
+
+## Skip l2 configuration in diag_init
+#diag_l2_disable=1
+
+## L2 mode to load 0=DEFAULT, 1=INGRESS_DIST, 2=INGRESS_CENT, 3=EGRESS_DIST, 4=EGRESS_CENT, 5=EGRESS_INDEPENDENT
+#                  6=(INGRESS_CENT + LEARN_CPU), 7=(EGRESS_CENT + LEARN_CPU)
+#l2_mode=0
+
+## Skip stk configuration in diag_init
+#diag_no_appl_stk=1
+
+## Skip itmh programmable mode configuration in diag_init
+#diag_no_itmh_prog_mode=1
+
+# Ingress PMF key allocation optimization
+field_key_allocation_msb_balance_enable=1
+
+## Set modid value. Should be used when running multi-fap system.
+## Each fap should have it's unique modid value. Default is described in diag_chassis.
+#module_id=<modid>
+
+## Set base_modid value. Default is 0.
+#base_module_id=<base_modid>
+
+## Set nof_devices value. Should be set when working on multi-faps system.
+## Default is 1 when diag_chassis is not enabled, or 2 when diag_chassis is enabled.
+#n_devices=<nof_devices>
+
+#########################################
+##cfg for BCM88650 - Arad
+#########################################
+
+### Device configuration ###
+
+## Activate Emulation partial init. Values: 0 - Normal, 1 - Emulation .Default: 0x0.
+diag_emulator_partial_init.BCM88650=0
+#diag_emulator_partial_init.BCM88270=1
+#diag_emulator_partial_init.BCM88680=1
+#diag_emulator_partial_init.BCM88675=2
+
+#real phy isn't connected - remove on silicon arrival
+#phy_simul.BCM88675=1
+
+## General
+# Set the FAP Device mode
+# Options: PP / TM / TDM_OPTIMIZED / TDM_STANDARD
+fap_device_mode.BCM88650=PP
+#
+# FIXME: SDK-91833
+# PP Fixed Followed SDK-91662
+#
+
+# Options: SYMMETRIC / ASYMMETRIC / SINGLE_CORE
+# For faster emulation, use SINGLE_CORE
+device_core_mode.BCM88675=SYMMETRIC
+device_core_mode.BCM88680=SYMMETRIC
+## Credit worth size (Bytes)
+credit_size.BCM88650=1024
+
+## KBP recovery - allow for recovery sequence to run during init and soft reset (only if necessary)
+custom_feature_kbp_recovery_enable=0
+
+## Clock configurations
+# Core clock speed (MHz). Default- BCM88650: 600 MHz, BCM88675: 720 MHz
+core_clock_speed_khz.BCM88650=600000
+core_clock_speed_khz.BCM88675=720000
+core_clock_speed_khz.BCM88470=600000
+core_clock_speed_khz.BCM88680=837500
+core_clock_speed_khz.BCM88270=250000
+
+# System reference clock (MHz). Default- BCM88650: 600 MHz, BCM88675: 800 MHz
+system_ref_core_clock_khz.BCM88650=1200000
+
+#fabric pcp
+fabric_pcp_enable.BCM88675=1
+
+#Using Tcam instead of the KAPS for the IPv4 MC and IPV6 MC
+# 0 - Don't use TACM
+# 1 - Use TCAM for IPV4/6 MC
+# 2 - Use TACM for IPV4/6 MC but don't use the VRF field as a qualifier for IPV4 MC entries
+#custom_feature_l3_mc_use_tcam=0
+
+#for IPv6UC: use Tcam instead of KAPS
+#Note that if this property is enabled the IPV6-UC RPF will be disabled
+#custom_feature_l3_ipv6_uc_use_tcam=0
+
+
+#ams pll override value (only for Jericho A0/A1)- possible values: 0x19, 0x1e, 0x1f. Default value 0x1f
+#custom_feature_ams_pll_override.BCM88675=0x1f
+
+### Network Interface configuration ###
+## Use of the ucode_port_<Local-Port-Id>=<Interface-type>[<Interface-Id>][.<Channel-Id>]
+## Local port range: 0 - 255.
+## Interface types: XAUI/RXAUI/SGMII/ILKN/10GBase-R/XLGE/CGE/CPU/IGNORE
+
+# Map bcm local port to CPU[.channel] interfaces
+ucode_port_0.BCM88650=CPU.0
+
+# Map bcm local port to Network-Interface[.channel] interfaces - TBD
+ucode_port_128.BCM88650=10GBase-R36
+ucode_port_129.BCM88650=10GBase-R37
+ucode_port_130.BCM88650=10GBase-R32
+ucode_port_131.BCM88650=10GBase-R33
+ucode_port_132.BCM88650=10GBase-R34
+ucode_port_133.BCM88650=10GBase-R35
+ucode_port_134.BCM88650=10GBase-R16
+ucode_port_135.BCM88650=10GBase-R17
+ucode_port_136.BCM88650=10GBase-R18
+ucode_port_137.BCM88650=10GBase-R19
+
+ucode_port_1.BCM88650=10GBase-R22
+ucode_port_2.BCM88650=10GBase-R21
+ucode_port_3.BCM88650=10GBase-R42
+ucode_port_4.BCM88650=10GBase-R41
+
+custom_feature_nif_recovery_enable.BCM88650=1
+custom_feature_nif_recovery_iter.BCM88650=7
+custom_feature_skip_before_traffic_validation.BCM88675=0
+#custom_feature_mac_fifo_start_tx_thrs.BCM88675=9
+
+#redirect packets that are destined to invalid queues
+invalid_queue_redirect=0
+
+#CLP0
+#ucode_port_1.BCM88675=XE0:core_0.1
+#ucode_port_2.BCM88675=XE1:core_0.2
+#ucode_port_3.BCM88675=XE2:core_0.3
+#ucode_port_4.BCM88675=XE3:core_0.4
+#CLP1
+#ucode_port_5.BCM88675=XE4:core_0.5
+#ucode_port_6.BCM88675=XE5:core_0.6
+#ucode_port_7.BCM88675=XE6:core_0.7
+#ucode_port_8.BCM88675=XE7:core_0.8
+#CLP2
+#ucode_port_9.BCM88675=XE8:core_0.9
+#ucode_port_10.BCM88675=XE9:core_0.10
+#ucode_port_11.BCM88675=XE10:core_0.11
+#ucode_port_12.BCM88675=XE11:core_0.12
+#CLP3
+#ucode_port_13.BCM88675=XE12:core_0.13
+#ucode_port_14.BCM88675=XE13:core_0.14
+#ucode_port_15.BCM88675=XE14:core_0.15
+#ucode_port_16.BCM88675=XE15:core_0.16
+#CLP4
+#ucode_port_17.BCM88675=XE16:core_0.17
+#ucode_port_18.BCM88675=XE17:core_0.18
+#ucode_port_19.BCM88675=XE18:core_0.19
+#ucode_port_20.BCM88675=XE19:core_0.20
+#CLP5
+#ucode_port_21.BCM88675=XE20:core_0.21
+#ucode_port_22.BCM88675=XE21:core_0.22
+#ucode_port_23.BCM88675=XE22:core_0.23
+#ucode_port_24.BCM88675=XE23:core_0.24
+#XLP0
+#ucode_port_25.BCM88675=XE24:core_0.25
+#ucode_port_26.BCM88675=XE25:core_0.26
+#ucode_port_27.BCM88675=XE26:core_0.27
+#ucode_port_28.BCM88675=XE27:core_0.28
+#XLP1
+#ucode_port_29.BCM88675=XE28:core_0.29
+#ucode_port_30.BCM88675=XE29:core_0.30
+#ucode_port_31.BCM88675=XE30:core_0.31
+#ucode_port_32.BCM88675=XE31:core_0.32
+#XLP2
+#ucode_port_33.BCM88675=XE32:core_0.33
+#ucode_port_34.BCM88675=XE33:core_0.34
+#ucode_port_35.BCM88675=XE34:core_0.35
+#ucode_port_36.BCM88675=XE35:core_0.36
+#XLP3
+#ucode_port_37.BCM88675=XE36:core_0.37
+#ucode_port_38.BCM88675=XE37:core_0.38
+#ucode_port_39.BCM88675=XE38:core_0.39
+#ucode_port_40.BCM88675=XE39:core_0.40
+#XLP4 (not as PMQ0)
+#ucode_port_41.BCM88675=XE40:core_0.41
+#ucode_port_42.BCM88675=XE41:core_0.42
+#ucode_port_43.BCM88675=XE42:core_0.43
+#ucode_port_44.BCM88675=XE43:core_0.44
+#XLP5 (not as PMQ1)
+#ucode_port_45.BCM88675=XE44:core_0.45
+#ucode_port_46.BCM88675=XE45:core_0.46
+#ucode_port_47.BCM88675=XE46:core_0.47
+#ucode_port_48.BCM88675=XE47:core_0.48
+#XLP9
+#ucode_port_49.BCM88675=XE60:core_0.49
+#ucode_port_50.BCM88675=XE61:core_0.50
+#ucode_port_51.BCM88675=XE62:core_0.51
+#ucode_port_52.BCM88675=XE63:core_0.52
+#XLP10
+#ucode_port_53.BCM88675=XE64:core_0.53
+#ucode_port_54.BCM88675=XE65:core_0.54
+#ucode_port_55.BCM88675=XE66:core_0.55
+#ucode_port_56.BCM88675=XE67:core_0.56
+#XLP11 (not as PMQ3)
+#ucode_port_57.BCM88675=XE68:core_0.57
+#ucode_port_58.BCM88675=XE69:core_0.58
+#ucode_port_59.BCM88675=XE70:core_0.59
+#ucode_port_60.BCM88675=XE71:core_0.60
+
+
+ucode_port_0.BCM88675=CPU.0:core_0.0
+ucode_port_0.BCM88680=CPU.0:core_0.0
+ucode_port_200.BCM88675=CPU.8:core_1.200
+ucode_port_200.BCM88680=CPU.8:core_1.200
+ucode_port_201.BCM88675=CPU.16:core_0.201
+ucode_port_201.BCM88680=CPU.16:core_0.201
+ucode_port_202.BCM88675=CPU.24:core_1.202
+ucode_port_202.BCM88680=CPU.24:core_1.202
+ucode_port_203.BCM88675=CPU.32:core_0.203
+ucode_port_203.BCM88680=CPU.32:core_0.203
+
+#default ports for Jericho and QMX
+ucode_port_1.BCM88675=CGE0:core_0.1
+ucode_port_2.BCM88675=ILKN1:core_0.2
+ilkn_lanes_1.BCM88675=0xfff000
+ucode_port_3.BCM88675=ILKN2:core_0.3
+ilkn_lanes_2.BCM88675=0xfff
+ucode_port_17.BCM88675=CGE1:core_1.17
+
+#default ports for Jericho
+ucode_port_13.BCM88675=10GBase-R64:core_0.13
+ucode_port_14.BCM88675=10GBase-R65:core_0.14
+ucode_port_15.BCM88675=10GBase-R68:core_1.15
+ucode_port_16.BCM88675=10GBase-R69:core_1.16
+
+#default ports for Jericho Plus
+ucode_port_13.BCM88680=10GBase-R40:core_0.13
+ucode_port_14.BCM88680=10GBase-R43:core_0.14
+ucode_port_15.BCM88680=10GBase-R44:core_1.15
+ucode_port_16.BCM88680=10GBase-R46:core_1.16
+
+#default ports for QMX
+ucode_port_13.BCM88375_A0=10GBase-R64:core_0.13
+ucode_port_14.BCM88375_A0=10GBase-R66:core_0.14
+ucode_port_15.BCM88375_A0=10GBase-R69:core_1.15
+ucode_port_16.BCM88375_A0=10GBase-R71:core_1.16
+ 
+
+ucode_port_13.BCM88375_B0=10GBase-R64:core_0.13
+ucode_port_14.BCM88375_B0=10GBase-R66:core_0.14
+ucode_port_15.BCM88375_B0=10GBase-R69:core_1.15
+ucode_port_16.BCM88375_B0=10GBase-R71:core_1.16
+ 
+ 
+#default ports for QAX
+ucode_port_0.BCM88470=CPU.0:core_0.0
+
+ucode_port_200.BCM88470=CPU.8:core_0.200
+
+ucode_port_201.BCM88470=CPU.16:core_0.201
+
+ucode_port_202.BCM88470=CPU.24:core_0.202
+
+ucode_port_203.BCM88470=CPU.32:core_0.203
+
+tm_port_header_type_in_0.BCM88470=INJECTED_2_PP
+tm_port_header_type_out_0.BCM88470=CPU
+
+ucode_port_1.BCM88470=XE22:core_0.1
+ucode_port_2.BCM88470=XE21:core_0.2
+ucode_port_3.BCM88470=XE41:core_0.3
+ucode_port_4.BCM88470=XE42:core_0.4
+
+pon_application_support_enabled_1.BCM88470=TRUE
+pon_application_support_enabled_2.BCM88470=TRUE
+pon_application_support_enabled_3.BCM88470=TRUE
+pon_application_support_enabled_4.BCM88470=TRUE
+
+ucode_port_128.BCM88470=XE36:core_0.128
+ucode_port_129.BCM88470=XE37:core_0.129
+ucode_port_130.BCM88470=XE32:core_0.130
+ucode_port_131.BCM88470=XE33:core_0.131
+ucode_port_132.BCM88470=XE34:core_0.132
+ucode_port_133.BCM88470=XE35:core_0.133
+ucode_port_134.BCM88470=XE16:core_0.134
+ucode_port_135.BCM88470=XE17:core_0.135
+ucode_port_136.BCM88470=XE18:core_0.136
+ucode_port_137.BCM88470=XE19:core_0.137
+
+bcm886xx_rx_use_hw_trap_id.BCM88470=0
+
+stable_filename.BCM88270=/tmp/warmboot_data
+fap_device_mode.BCM88270=PP
+#default ports for QUX
+ucode_port_0.BCM88270=CPU.0:core_0.0
+ucode_port_200.BCM88270=CPU.8:core_0.100
+ucode_port_201.BCM88270=CPU.16:core_0.101
+ucode_port_202.BCM88270=CPU.24:core_0.102
+ucode_port_203.BCM88270=CPU.32:core_0.103
+ucode_port_1.BCM88270=XE0:core_0.1
+ucode_port_2.BCM88270=XE1:core_0.2
+ucode_port_3.BCM88270=XE2:core_0.3
+ucode_port_13.BCM88270=GE12:core_0.13
+ucode_port_14.BCM88270=GE13:core_0.14
+ucode_port_15.BCM88270=GE14:core_0.15
+ucode_port_16.BCM88270=GE15:core_0.16
+ucode_port_17.BCM88270=GE16:core_0.17
+
+
+#Firmware mode:
+#(Documantation relevant for BCM886xx and BCM887xx)
+# 0=DEFAULT
+# 1=SFP_OPT_SR4     - optical short range
+# 2=SFP_DAC         - direct attach copper
+# 3=XLAUI           - 40G XLAUI mode
+# 4=FORCE_OSDFE     - force over sample digital feedback equalization
+# 5=FORCE_BRDFE     - force baud rate digital feedback equalization
+# 6=SW_CL72         - software cl72 with AN on
+# 7=CL72_WITHOUT_AN - cl72 without AN
+#For Negev2 chassis enable DFE is recommended
+serdes_firmware_mode.BCM88650=2
+serdes_firmware_mode_il.BCM88650=4
+serdes_firmware_mode_sfi.BCM88650=0
+serdes_firmware_mode_sfi.BCM88675=4
+serdes_firmware_mode_sfi.BCM88470=4
+serdes_firmware_mode_sfi.BCM88270=4
+serdes_firmware_mode_sfi.BCM88680=4
+
+
+#ucode_port_1.BCM88650=10GBase-R0
+#ucode_port_2.BCM88650=10GBase-R1
+#ucode_port_3.BCM88650=10GBase-R2
+#ucode_port_4.BCM88650=10GBase-R3
+#ucode_port_5.BCM88650=10GBase-R4
+#ucode_port_6.BCM88650=10GBase-R5
+#ucode_port_7.BCM88650=10GBase-R6
+#ucode_port_8.BCM88650=10GBase-R7
+#ucode_port_9.BCM88650=10GBase-R8
+#ucode_port_10.BCM88650=10GBase-R9
+#ucode_port_11.BCM88650=10GBase-R10
+#ucode_port_12.BCM88650=10GBase-R11
+#ucode_port_13.BCM88650=10GBase-R12
+#ucode_port_14.BCM88650=10GBase-R13
+#ucode_port_15.BCM88650=10GBase-R14
+#ucode_port_16.BCM88650=10GBase-R15
+#ucode_port_17.BCM88650=10GBase-R16
+#ucode_port_18.BCM88650=10GBase-R17
+#ucode_port_19.BCM88650=10GBase-R18
+#ucode_port_20.BCM88650=10GBase-R19
+ucode_port_200.BCM88650=CPU.8
+ucode_port_201.BCM88650=CPU.16
+ucode_port_202.BCM88650=CPU.24
+ucode_port_203.BCM88650=CPU.32
+
+#40G
+#ucode_port_1.BCM88650=XLGE0
+#ucode_port_2.BCM88650=XLGE1
+#ucode_port_3.BCM88650=XLGE2
+#ucode_port_4.BCM88650=XLGE3
+#ucode_port_5.BCM88650=XLGE4
+#ucode_port_6.BCM88650=XLGE5
+#ucode_port_7.BCM88650=XLGE6
+
+#ILKN configuration - basic config
+#ucode_port_31.BCM88650=ILKN0
+#ucode_port_32.BCM88650=ILKN1
+#ucode_port_32.BCM88675=ILKN1:core_0.32
+#ilkn_num_lanes_0.BCM88650=12
+#ilkn_num_lanes_1.BCM88650=12
+#port_init_speed_il.BCM88650=10312
+
+
+#ILKN per port channel stat
+#ilkn_counters_mode.BCM88650=PACKET_PER_CHANNEL
+
+#ILKN configuration - advanced
+#ilkn_metaframe_sync_period=2048
+#ILKN burst configuration - ILKN max burst suppored values: 128, 256
+#ILKN burst short should be lesser or equal to burst max /2
+#ilkn_burst_max.BCM88675=256
+#ilkn_burst_min.BCM88675=32
+# Enable\Disable ILKN status message sent through an out-of-band interface.
+# ilkn_interface_status_oob_ignore.BCM88650=1
+
+# ilkn_is_burst_interleaving<ilkn_id>
+# 1 - The channelized interface functions in burst interleaving mode (default). 0 - in full packet mode.
+#ilkn_is_burst_interleaving_1.BCM88675=0
+
+##ILKN retransmit
+#ilkn_retransmit_enable_rx.BCM88650=1
+#ilkn_retransmit_enable_tx.BCM88650=1
+#ilkn_retransmit_buffer_size.BCM88650=250
+#ilkn_retransmit_num_requests_resent.BCM88650=15
+#ilkn_retransmit_num_sn_repetitions_tx.BCM88650=1
+#ilkn_retransmit_num_sn_repetitions_rx.BCM88650=1
+#ilkn_retransmit_rx_timeout_words.BCM88650=3800
+#ilkn_retransmit_rx_timeout_sn.BCM88650=250
+#ilkn_retransmit_rx_ignore.BCM88650=80
+#ilkn_retransmit_rx_reset_when_error_enable.BCM88650=1
+#ilkn_retransmit_rx_watchdog.BCM88650=0
+#ilkn_retransmit_rx_reset_when_alligned_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_retry_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_after_disc_error_enable.BCM88650=1
+#ilkn_retransmit_rx_reset_when_wrap_before_disc_error_enable.BCM88650=0
+#ilkn_retransmit_rx_reset_when_timout_error_enable.BCM88650=0
+#ilkn_retransmit_tx_wait_for_seq_num_change_enable.BCM88650=1
+#ilkn_retransmit_tx_ignore_requests_when_fifo_almost_empty.BCM88650=1
+
+#ucode_port_40.BCM88650=RCY.0
+#ucode_port_41.BCM88650=RCY.1
+#ucode_port_42.BCM88650=RCY.2
+
+## CAUI Configuration
+#ucode_port_41.BCM88650=CGE0
+#ucode_port_42.BCM88650=CGE1
+caui_num_lanes_0.BCM88650=10
+caui_num_lanes_1.BCM88650=10
+#Required for working IXIA 100G port:
+mld_lane_swap_lane20_ce.BCM88650=0
+mld_lane_swap_lane21_ce.BCM88650=1
+mld_lane_swap_lane0_ce.BCM88650=20
+mld_lane_swap_lane1_ce.BCM88650=21
+
+# This configures the lane polarity
+pb_serdes_lane_swap_polarity_tx_phy1.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy2.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy3.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy4.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy5.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy6.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy7.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy8.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy10.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy13.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy14.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy17.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy18.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy19.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy20.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy21.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy22.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy23.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy24.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy25.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_tx_phy27.BCM88650=1
+pb_serdes_lane_swap_polarity_tx_phy28.BCM88650=1
+
+pb_serdes_lane_swap_polarity_rx_phy1.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy2.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy3.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy4.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy5.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy6.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy7.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy8.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy9.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy10.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy11.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy12.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy13.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy14.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy15.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy16.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy17.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy18.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy19.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy20.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy21.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy22.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy23.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy24.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy25.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy26.BCM88650=0
+pb_serdes_lane_swap_polarity_rx_phy27.BCM88650=1
+pb_serdes_lane_swap_polarity_rx_phy28.BCM88650=1
+
+xgxs_tx_lane_map_quad0.BCM88650=0x1032
+xgxs_tx_lane_map_quad1.BCM88650=0x2310
+xgxs_tx_lane_map_quad2.BCM88650=0x3210
+xgxs_tx_lane_map_quad3.BCM88650=0x3210
+xgxs_tx_lane_map_quad4.BCM88650=0x1230
+xgxs_tx_lane_map_quad5.BCM88650=0x3201
+xgxs_tx_lane_map_quad6.BCM88650=0x2103
+xgxs_tx_lane_map_quad7.BCM88650=0x0123
+
+xgxs_rx_lane_map_quad0.BCM88650=0x3012
+xgxs_rx_lane_map_quad1.BCM88650=0x0132
+xgxs_rx_lane_map_quad2.BCM88650=0x1230
+xgxs_rx_lane_map_quad3.BCM88650=0x0123
+xgxs_rx_lane_map_quad4.BCM88650=0x3012
+xgxs_rx_lane_map_quad5.BCM88650=0x2013
+xgxs_rx_lane_map_quad6.BCM88650=0x2103
+
+
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88650=1
+
+#Port init mode
+#port_init_duplex=0
+#port_init_adv=0
+#port_init_autoneg=0
+
+
+# This disables serdes initialization
+# phy_null.BCM88650=1
+
+##  Number of Internal ports
+# Enable the ERP port. Values: 0 / 1.
+num_erp_tm_ports.BCM88650=1
+# Enable the OLP port. Values: 0 / 1.
+num_olp_tm_ports.BCM88650=1
+
+## Firmware Load Method
+load_firmware.BCM88650=0x102
+load_firmware.BCM88675=0x102
+load_firmware_fabric.BCM88675=0x102
+load_firmware_fabric.BCM88680=0x102
+
+### Headers configuration ###
+
+## Use of the tm_port_header_type_<Local-Port-Id>=<Header-type>
+## Default header type is derived from fap_device_mode: If fap_device_mode is
+## PP, default header type is ETH. Otherwise, defualt header type is TM.
+## Header type per port can be overriden.
+## All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/UDH_ETH
+## Injected header types: if PTCH, INJECTED (local Port of type TM) or INJECTED_PP (PP)
+##                        if PTCH-2, INJECTED_2 (local Port of type TM) or INJECTED_2_PP (PP)
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88650=TM
+
+tm_port_header_type_in_0.BCM88650=INJECTED_2
+tm_port_header_type_out_0.BCM88650=TM
+
+tm_port_header_type_in_200.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_200.BCM88650=ETH
+tm_port_header_type_in_201.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_201.BCM88650=ETH
+tm_port_header_type_in_202.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_202.BCM88650=ETH
+tm_port_header_type_in_203.BCM88650=INJECTED_2_PP
+tm_port_header_type_out_203.BCM88650=ETH
+
+
+### Parser Configuration ###
+# Parser has 4 custom macros that are allocated dynamically and
+# configured according to the following features and soc properties:
+# Trill (1 macro) - trill_mode
+# FCoE (2 macros) - bcm886xx_fcoe_switch_mode
+# VxLAN (1 macro) - bcm886xx_vxlan_enable
+# IPv6-Extension-header (2 macros) - bcm886xx_ipv6_ext_hdr_enable
+# UDP (1 macro) - UDP parsing is enabled by default, and can be
+#  disabled with soc property custom_feature_udp_parse_disable
+#  When disabling UDP parsing VxLAN and 1588oUDP are affected
+
+
+# In FCoE NPV switch, if set to 1, 
+# packets that ingress from the N_PORT are treated as bridge
+# and packets that ingress from the NP_PORT are treated as router
+#fcoe_npv_bridge_mode=1
+# Enable IPv6 Extension Header, 0 - disable (default), 1 - enable
+#bcm886xx_ipv6_ext_hdr_enable=1
+
+# Disable UDP parsing, 0 - enable (default), 1 - disable
+#custom_feature_udp_parse_disable=1
+
+#OAMP/SAT port
+#tm_port_header_type_out_232.BCM88650=CPU
+tm_port_header_type_out_232.BCM88675=CPU
+
+### SAT
+## Enable SAT Interface. 0 - Disable, 1 - Enable (Default) 
+sat_enable=1
+
+# Set the recycling port processing to be raw (static forwarding)
+tm_port_header_type_rcy.BCM88650=RAW
+
+### RCPU
+# Valid CPU local ports on which RCPU packets can be received by slave device.
+#rcpu_rx_pbmp=0xf00000000000000000000000000000000000000000000000001
+
+#tm_port_header_type_514.BCM88650=RAW
+
+## Header extensions
+# Set if an FTMH Out-LIF extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS
+fabric_ftmh_outlif_extension.BCM88650=IF_MC
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88660: ENABLED, FULL_HASH
+# Options for 88650: ENABLED
+# Options for 88640 compatible: DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY
+# / 16B_STACKING_ROUTE_HISTORY / STANDBY_MC_LB (available only for AradPlus)
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88650=DISABLED
+
+# Set if an OTMH Out-LIF (CUD) Extension is present to Unicast and Multicast packets
+# Options: NEVER / IF_MC (only Multicast packets) / ALWAYS / DOUBLE_TAG (two hop scheduling) / EXTENDED: Extended 24 bit CUD
+# Default: NEVER
+# tm_port_otmh_outlif_ext_mode_13.BCM88650=NEVER
+
+# Set if an OTMH Source-System-Port Extension is present.
+# Option: 0/1
+# Default: 0
+# tm_port_otmh_src_ext_enable_13.BCM88650=0
+
+#Trunk hash format, relevant only for AradPlus. Possible values: NORMAL (default) / INVERTED / DUPLICATED.
+#trunk_hash_format=NORMAL
+
+## Stacking Application
+#stacking_enable.BCM88650=1
+
+## Determine if FTMH Destination System Port Extension is added to all Ethernet packets.
+#ftmh_dsp_extension_add=1
+
+## Determine if FTMH Destination System Port Extension of mirrored/snooped packets is stamped with the original destination.
+#mirror_stamp_sys_on_dsp_ext=1
+
+## System RED
+# Set System-Red functionality.
+#system_red_enable.BCM88650=1
+
+# Indicate the size (Bytes) of a first header to skip
+# before the major header at ingress (e.g. Ethernet, ITMH)
+# It can be set per port also
+first_header_size.BCM88650=0
+
+# Indicate the size (Bytes) of the PMF Extension Headers
+# to remove for TM header type ports (expecting ITMH)
+# Set per port
+#post_headers_size_0.BCM88650=4
+
+# Indicate the size (Bytes) of the User-Headers: configurable
+# headers located in the fabric between internal headers and
+# Ethernet. Their values are set by Ingress FP, and can be used
+# by Egress FP or Egress Editor.
+# units: bits. 4 values can be set:
+# 0 - size of the 1st User-Header, for the Egress PMF. 0b / 8b / 16b
+# 1 - size of the 2nd User-Header, for the Egress PMF. 0b / 8b / 16b
+# The sum of these 2 values should be under 16b
+# 2, 3 - size of the 1st/2nd User-Header, for the Egress Editor.
+# 0b / 8b / 16b / 24b / 32b
+# Each of the global User-Header size must be under 32 bits, but not 24 bits.
+# The Egress FP field is always at the MSB of the User-Header
+# Not available for 88650-A0.
+#field_class_id_size_0.BCM88650=8
+#field_class_id_size_1.BCM88650=0
+#field_class_id_size_2.BCM88650=24
+#field_class_id_size_3.BCM88650=0
+
+
+### Trunk - LAG configuration ###
+# Set the number of LAGs: 1024, 512, 256, 128 or 64
+number_of_trunks.BCM88650=256
+# Using the lb-key's MSB in trunk resolutions.
+# 0 = use LSB (default)
+# 1 = use MSB
+trunk_resolve_use_lb_key_msb_stack = 0
+trunk_resolve_use_lb_key_msb_smooth_division = 0
+
+### SYNCE configuration ###
+## Synchronous Ethernet Signal Mode.
+## Options: TWO_DIFF_CLK, TWO_CLK_AND_VALID. Default: TWO_CLK_AND_VALID
+#sync_eth_mode.BCM88650=TWO_CLK_AND_VALID
+
+## Clock Source (single SerDes) lane in the specified NIF port.
+## Usage: sync_eth_clk_to_nif_id_clk_<clk_number>=<serdes_number>
+#sync_eth_clk_to_nif_id_clk_0.BCM88650=1
+#sync_eth_clk_to_nif_id_clk_1.BCM88650=1
+
+## Clock Divider for the selected recovered clock. Valid values: 1/2/4. Default: 1.
+## Usage: sync_eth_clk_divider_clk_<clk_number>=<1/2/4>
+#sync_eth_clk_divider_clk_0.BCM88650=1
+#sync_eth_clk_divider_clk_1.BCM88650=1
+
+## Usage: sync_eth_clk_to_port_id_clk_<clk_number>=<serdes_number>
+#sync_eth_clk_to_port_id_clk_0.BCM88675=13
+#sync_eth_clk_to_port_id_clk_1.BCM88675=13
+
+## Clock frequency selector for the selected recovered clock. Valid values: <125MHz-0/156.25MHz-1/25MHz-2>. Default: 1.
+## Usage: sync_eth_clk_divider_clk<clk_id>=<0-125MHz/1-156.25MHz/2-25MHz>
+#sync_eth_clk_divider_clk0.BCM88675=1
+#sync_eth_clk_divider_clk1.BCM88675=1
+
+## Enable the automatic squelch function for the recovered clock. Valid values: 0/1. Default: 0.
+## Usage: sync_eth_clk_squelch_enable_clk_<clk_number>=<0/1>
+#sync_eth_clk_squelch_enable_clk_0.BCM88650=0
+#sync_eth_clk_squelch_enable_clk_1.BCM88650=0
+
+### ELK configuration ###
+## External lookup (TCAM) Device type select, Indicate the External lookup Device type.
+# Value Options: NONE/NL88650. Default: NONE.
+#ext_tcam_dev_type=NL88650
+
+
+##External lookup (elk) ILKN lanes swap. If set, reverse the lanes numbering order on elk device side. DNX system default is 1.
+#ext_ilkn_reverse=0
+
+## Set ELK FWD table Size.
+# format: ext_xxx_fwd_table_size.
+# where xxx replaced by FWD options: ip4_uc_rpf/ip4_mc/ip6_uc_rpf/ip6/ip6_mc/trill_uc/trill_mc/mpls/coup_mpls
+# Value Options: (0) - External table disabled, >0: number of entries. Default: 0.
+#ext_ip4_uc_rpf_fwd_table_size=8192
+#ext_ip4_mc_fwd_table_size=8192
+
+#External TCAM result size, allows to modify each external tcam result size. 
+#The total size of the external result for NL12K = 120bit .
+#The size of each segment updates the corresponding qualifier bcmFieldQualifyExternalValue. 
+#Default values according to the device property.
+#in-case of double capacity use the following values: 48,48,24,24 and ext_tcam_result_size_segment_pad_3=24
+
+#ext_tcam_result_size_segment_0=48
+#ext_tcam_result_size_segment_1=32
+#ext_tcam_result_size_segment_2=24
+#ext_tcam_result_size_segment_3=16
+#ext_tcam_result_size_segment_4=32
+#ext_tcam_result_size_segment_5=32
+
+## Set ELK IP FWD use NetRoute  ALG.
+# Value Options: ALG_LPM_LPM/ALG_LPM_NETROUTE/ALG_LPM_TCAM. Default: ALG_LPM_TCAM.
+#ext_fwd_algorithm_lpm=ALG_LPM_TCAM
+
+## Set ELK interface mode.
+# Change ELK interface configuration to support CAUI port.
+# Value Options: 0/1. 0 - Normal mode, 1  2 CAUI port + ELK mode. Default: 0.
+#ext_interface_mode=0
+
+### Configure MDIO interface
+# External MDIO clock rate divisor . Default: 0x24.
+#rate_ext_mdio_divisor=0x36
+# External MDIO clock rate divisor. Default: 0x1.
+#rate_ext_mdio_dividend=1
+
+### TDM - OTN configuration ###
+# Options: 0 / TDM_OPTIMIZED / TDM_STANDARD
+fap_tdm_bypass.BCM88650=0
+
+### TDM - RAW/PACKET configuration ###
+# if fap_tdm_packet config to be true, enable specific ports on the device to configure for tdm packet mode traffic.
+fap_tdm_packet.BCM88650=0
+
+# Indicate if a Petra-B device is connected to the actual device
+# For TDM/OTN applications,
+# system_is_petra_b_in_system.BCM88650=0
+##Indicate if TDM can arrive throgh primary pipe.
+#Should be 1 for a System with PetraB that connected to fabric over primary pipe.
+fabric_tdm_over_primary_pipe.BCM88650=0
+
+### Fabric configuration ###
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88650=2
+#Possible values - KR_FEC, 64_66, RS_FEC, LL_RS_FEC
+backplane_serdes_encoding.BCM88675=RS_FEC
+backplane_serdes_encoding.BCM88470=RS_FEC
+backplane_serdes_encoding.BCM88270=RS_FEC
+backplane_serdes_encoding.BCM88680=RS_FEC
+
+#SFI speed rate
+port_init_speed_sfi.BCM88650=10312
+port_init_speed_sfi.BCM88675=25000
+port_init_speed_sfi.BCM88470=25000
+port_init_speed_sfi.BCM88270=25000
+port_init_speed_sfi.BCM88680=25000
+
+#CL72
+port_init_cl72_sfi.BCM88650=1
+port_init_cl72_sfi.BCM88675=1
+fabric_segmentation_enable.BCM88650=1
+
+## Fabric transmission mode
+# Set the Connect mode to the Fabric
+# Options: FE - presence of a Fabric device (single stage) / MULT_STAGE_FE -  Multi-stage /
+# SINGLE_FAP - stand-alone device / MESH - mesh / BACK2BACK - 2 devices in Mesh
+#fabric_connect_mode.BCM88650=SINGLE_FAP
+fabric_connect_mode.BCM88650=FE
+# The Jericho configuration below will be overriden in jer.soc for multi device configurations
+fabric_connect_mode.BCM88675=SINGLE_FAP
+fabric_connect_mode.BCM88470=SINGLE_FAP
+fabric_connect_mode.BCM88270=SINGLE_FAP
+fabric_connect_mode.BCM88680=SINGLE_FAP
+
+
+## Cell format configuration
+# Indicate if the traffic can be sent in dual pipe
+is_dual_mode.BCM88650=0
+# Indicate on the existance of dual pipe device mode in system
+system_is_dual_mode_in_system.BCM88650=0
+
+# Indicate the format of the cell:
+# A VCS128 cell is used if system_is_vcs_128_in_system or system_is_fe600_in_system is TRUE
+system_is_vcs_128_in_system.BCM88650=0
+system_is_fe600_in_system.BCM88650=0
+
+### WRED ###
+
+# Set the maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88650=0
+
+### OCB (On-Chip Buffer) configuration ###
+# Enable the OCB
+# Enable MODES:
+#   0/FALSE        -->  OCB_DISABLED     --> No OCB use
+#   1/TRUE         -->  OCB_ENABLED      --> Like in Arad-A0/B0. Some packets may use both DRAM and OCB resources
+#   ONE_WAY_BYPASS -->  Depends on number of present drams (available only for AradPlus):
+#                      0 drams:   - OCB_ONLY
+#                      1 drams:   - OCB_ONLY_1_DRAM     -->  : OCB-only with 1 DRAM for the free pointers
+#                      2-8 drams: - OCB_DRAM_SEPARATE   -->  : OCB and DRAM coexist separately
+#   Default: TRUE.
+bcm886xx_ocb_enable.BCM88650=1
+
+## OCB (On-Chip Buffer) configuration
+# OCB modes:
+#   0 - Disabled
+#   1 - Enabled (Default).
+bcm886xx_ocb_enable.BCM88675=1
+
+# OCB Data Buffer size. Possible values: 128/256/512/1024. Default: 256.
+bcm886xx_ocb_databuffer_size.BCM88650=256
+# OCB Data Buffer size. Jericho allowed values: 256/512. Default: 256.
+bcm886xx_ocb_databuffer_size.BCM88675=256
+# Repartition between Unicast and Full Multicast buffers.
+# 0: 80% Unicast and 20% Multicast, 1: Unicast-Only
+bcm886xx_ocb_repartition.BCM88650=0
+
+
+### PDM configuration ###
+# Set the PDM Mode.
+# 0: simple (default), 1: extended (mandatory for LLFC-VSQ, PFC-VSQ, or ST-VSQ)
+bcm886xx_pdm_mode.BCM88650=0
+
+### Multicast Number of DBuff mode ###
+# Set IQM FMC buffers-replication sizes
+# Options for 88650: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE/ARAD_INIT_FMC_64_REP_128K_DBUFF_MODE
+# Default: ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88650=ARAD_INIT_FMC_4K_REP_64K_DBUFF_MODE
+
+### Multicast Number of DBuff mode ###
+# Set FMC buffers-replication sizes
+# Options for 88675:
+#    JERICHO_INIT_FMC_64_REP_512K_DBUFF_MODE
+#    JERICHO_INIT_FMC_4K_REP_256K_DBUFF_MODE (Default)
+#    JERICHO_INIT_FMC_NO_REP_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88675=JERICHO_INIT_FMC_4K_REP_256K_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88470=JERICHO_INIT_FMC_NO_REP_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88270=JERICHO_INIT_FMC_NO_REP_DBUFF_MODE
+multicast_nbr_full_dbuff.BCM88680=JERICHO_INIT_FMC_4K_REP_256K_DBUFF_MODE
+
+
+### Multicast configuration ###
+# Multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_max.BCM88650=4095
+
+#### Jericho configuration of the number of ingress/egress multicast groups
+# Ingress max MCID can be up to 131070, Egress max MCID in Mesh or single FAP modes is up to 65535,
+# or otherwise is up to 131071.
+#multicast_ingress_group_id_range_max.BCM88675=32768
+#multicast_egress_group_id_range_max.BCM88675=60000
+
+### VOQ - Flow configuration ###
+
+# Set the VOQ mapping mode:
+# DIRECT: More than 4K System Ports are supported. System-level WRED is not supported.
+# INDIRECT: similar to Petra-B. Up to 4K System Ports.
+voq_mapping_mode.BCM88650=INDIRECT
+
+#Enable/disable HQOS support - mapping of many system ports to single modport
+hqos_mapping_enable.BCM88650=0
+
+# Set the Base Queue to be added to the packet flow-id
+# when the Flow-Id is set explicitely either by the ITMH
+# or by the Destination resolution in the Packet processing
+flow_mapping_queue_base.BCM88650=0
+
+
+# The allocation of the total per core resources between source and
+# queue based reservation depends on one of two guarantee modes: strict and loose.
+#ingress_congestion_management_guarantee_mode={STRICT,LOOSE} default: STRICT
+ingress_congestion_management_guarantee_mode=LOOSE
+# Each DP has its own thresholds for source based (dynamic) and for queue based (pools 0,1 and headroom).
+#  ingress_congestion_management_{source,queue,all}_threshold_percentage_color_[0-3]=[0-100] default: 100,85,75,0
+#  ingress_congestion_management_{ocb_only,dram_mix}_{pool_{0,1},headroom}=size default: 0
+#  ingress_congestion_management_min_resource_percentage_dynamic=[0-80] default: 20
+
+# Configure maximum IDs of ST-VSQs, maximum IDs of TM-ports, and enabling/disabling header compensation. 
+ingress_congestion_management_stag_max_id.BCM88675=0
+ingress_congestion_management_tm_port_max_id.BCM88675=255
+ingress_congestion_management_pkt_header_compensation_enable.BCM88675=0
+
+# The number of packet buffers used for the allocation of DMA memory at BCM RX task
+# The pool size determined by nof_pkts (256) * 16K.
+#rx_pool_nof_pkts.BCM88675=256
+
+
+# Set the number of priorities supported at egress per Port
+# Options: 1 / 2 / 8
+port_priorities.BCM88650=8
+port_priorities.BCM88675=2
+port_priorities.BCM88470=2
+port_priorities.BCM88270=2
+port_priorities.BCM88680=2
+
+
+# Set the shared multicast resource mode: Strict / Discrete
+egress_shared_resources_mode.BCM88650=Strict
+
+# Define outgoing port rate mode in data rate or packet rate.
+# Options: DATA / PACKET
+otm_port_packet_rate.BCM88650=DATA
+
+# Set Port egress recycling scheduler configuration.
+# 0: Strict Priority Scheduler, 1: Round Robin Scheduler
+port_egress_recycling_scheduler_configuration.BCM88650=0
+
+# Set statically the region mode per region id
+# 0: queue connectors only (InterDigitated = FALSE, OddEven = TRUE)
+# 1: queue connectors, SE (InterDigitated =TRUE, OddEven = TRUE)
+# 2: queue connectors, SE (InterDigitated =TRUE, OddEven = FALSE)
+dtm_flow_mapping_mode_region_65.BCM88650=0
+dtm_flow_mapping_mode_region_66.BCM88650=0
+dtm_flow_mapping_mode_region_67.BCM88650=0
+dtm_flow_mapping_mode_region_68.BCM88650=0
+dtm_flow_mapping_mode_region_69.BCM88650=0
+dtm_flow_mapping_mode_region_70.BCM88650=0
+dtm_flow_mapping_mode_region_71.BCM88650=0
+dtm_flow_mapping_mode_region_72.BCM88650=0
+dtm_flow_mapping_mode_region_73.BCM88650=0
+dtm_flow_mapping_mode_region_74.BCM88650=0
+dtm_flow_mapping_mode_region_75.BCM88650=0
+dtm_flow_mapping_mode_region_76.BCM88650=0
+dtm_flow_mapping_mode_region_77.BCM88650=0
+dtm_flow_mapping_mode_region_78.BCM88650=0
+dtm_flow_mapping_mode_region_79.BCM88650=0
+dtm_flow_mapping_mode_region_80.BCM88650=0
+dtm_flow_mapping_mode_region_81.BCM88650=1
+dtm_flow_mapping_mode_region_82.BCM88650=1
+dtm_flow_mapping_mode_region_83.BCM88650=1
+dtm_flow_mapping_mode_region_84.BCM88650=1
+dtm_flow_mapping_mode_region_85.BCM88650=1
+dtm_flow_mapping_mode_region_86.BCM88650=1
+dtm_flow_mapping_mode_region_87.BCM88650=1
+dtm_flow_mapping_mode_region_88.BCM88650=1
+dtm_flow_mapping_mode_region_89.BCM88650=1
+dtm_flow_mapping_mode_region_90.BCM88650=1
+dtm_flow_mapping_mode_region_91.BCM88650=1
+dtm_flow_mapping_mode_region_92.BCM88650=1
+dtm_flow_mapping_mode_region_93.BCM88650=1
+dtm_flow_mapping_mode_region_94.BCM88650=1
+dtm_flow_mapping_mode_region_95.BCM88650=1
+dtm_flow_mapping_mode_region_96.BCM88650=1
+dtm_flow_mapping_mode_region_97.BCM88650=1
+dtm_flow_mapping_mode_region_98.BCM88650=1
+dtm_flow_mapping_mode_region_99.BCM88650=2
+dtm_flow_mapping_mode_region_100.BCM88650=2
+dtm_flow_mapping_mode_region_101.BCM88650=2
+dtm_flow_mapping_mode_region_102.BCM88650=2
+dtm_flow_mapping_mode_region_103.BCM88650=2
+dtm_flow_mapping_mode_region_104.BCM88650=2
+dtm_flow_mapping_mode_region_105.BCM88650=2
+dtm_flow_mapping_mode_region_106.BCM88650=2
+dtm_flow_mapping_mode_region_107.BCM88650=2
+dtm_flow_mapping_mode_region_108.BCM88650=2
+dtm_flow_mapping_mode_region_109.BCM88650=2
+dtm_flow_mapping_mode_region_110.BCM88650=2
+dtm_flow_mapping_mode_region_111.BCM88650=2
+dtm_flow_mapping_mode_region_112.BCM88650=2
+dtm_flow_mapping_mode_region_113.BCM88650=2
+dtm_flow_mapping_mode_region_114.BCM88650=2
+dtm_flow_mapping_mode_region_115.BCM88650=2
+dtm_flow_mapping_mode_region_116.BCM88650=2
+dtm_flow_mapping_mode_region_117.BCM88650=2
+dtm_flow_mapping_mode_region_118.BCM88650=2
+dtm_flow_mapping_mode_region_119.BCM88650=2
+dtm_flow_mapping_mode_region_120.BCM88650=2
+dtm_flow_mapping_mode_region_121.BCM88650=2
+dtm_flow_mapping_mode_region_122.BCM88650=2
+dtm_flow_mapping_mode_region_123.BCM88650=2
+dtm_flow_mapping_mode_region_124.BCM88650=2
+dtm_flow_mapping_mode_region_125.BCM88650=2
+dtm_flow_mapping_mode_region_126.BCM88650=2
+dtm_flow_mapping_mode_region_127.BCM88650=2
+dtm_flow_mapping_mode_region_128.BCM88650=2
+
+## Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88650=2
+dtm_flow_nof_remote_cores_region_2.BCM88650=2
+dtm_flow_nof_remote_cores_region_3.BCM88650=2
+dtm_flow_nof_remote_cores_region_4.BCM88650=2
+dtm_flow_nof_remote_cores_region_5.BCM88650=2
+dtm_flow_nof_remote_cores_region_6.BCM88650=2
+dtm_flow_nof_remote_cores_region_7.BCM88650=2
+dtm_flow_nof_remote_cores_region_8.BCM88650=2
+dtm_flow_nof_remote_cores_region_9.BCM88650=2
+dtm_flow_nof_remote_cores_region_10.BCM88650=2
+dtm_flow_nof_remote_cores_region_11.BCM88650=2
+dtm_flow_nof_remote_cores_region_12.BCM88650=2
+dtm_flow_nof_remote_cores_region_13.BCM88650=2
+dtm_flow_nof_remote_cores_region_14.BCM88650=2
+dtm_flow_nof_remote_cores_region_15.BCM88650=2
+dtm_flow_nof_remote_cores_region_16.BCM88650=2
+dtm_flow_nof_remote_cores_region_17.BCM88650=2
+dtm_flow_nof_remote_cores_region_18.BCM88650=2
+dtm_flow_nof_remote_cores_region_19.BCM88650=2
+dtm_flow_nof_remote_cores_region_20.BCM88650=2
+dtm_flow_nof_remote_cores_region_21.BCM88650=2
+dtm_flow_nof_remote_cores_region_22.BCM88650=2
+dtm_flow_nof_remote_cores_region_23.BCM88650=2
+dtm_flow_nof_remote_cores_region_24.BCM88650=2
+dtm_flow_nof_remote_cores_region_25.BCM88650=2
+dtm_flow_nof_remote_cores_region_26.BCM88650=2
+dtm_flow_nof_remote_cores_region_27.BCM88650=2
+dtm_flow_nof_remote_cores_region_28.BCM88650=2
+dtm_flow_nof_remote_cores_region_29.BCM88650=2
+dtm_flow_nof_remote_cores_region_30.BCM88650=2
+dtm_flow_nof_remote_cores_region_31.BCM88650=2
+dtm_flow_nof_remote_cores_region_32.BCM88650=2
+dtm_flow_nof_remote_cores_region_33.BCM88650=2
+dtm_flow_nof_remote_cores_region_34.BCM88650=2
+dtm_flow_nof_remote_cores_region_35.BCM88650=2
+dtm_flow_nof_remote_cores_region_36.BCM88650=2
+dtm_flow_nof_remote_cores_region_37.BCM88650=2
+dtm_flow_nof_remote_cores_region_38.BCM88650=2
+dtm_flow_nof_remote_cores_region_39.BCM88650=2
+dtm_flow_nof_remote_cores_region_40.BCM88650=2
+dtm_flow_nof_remote_cores_region_41.BCM88650=2
+dtm_flow_nof_remote_cores_region_42.BCM88650=2
+dtm_flow_nof_remote_cores_region_43.BCM88650=2
+dtm_flow_nof_remote_cores_region_44.BCM88650=2
+dtm_flow_nof_remote_cores_region_45.BCM88650=2
+dtm_flow_nof_remote_cores_region_46.BCM88650=2
+dtm_flow_nof_remote_cores_region_47.BCM88650=2
+dtm_flow_nof_remote_cores_region_48.BCM88650=2
+dtm_flow_nof_remote_cores_region_49.BCM88650=2
+dtm_flow_nof_remote_cores_region_50.BCM88650=2
+dtm_flow_nof_remote_cores_region_51.BCM88650=2
+dtm_flow_nof_remote_cores_region_52.BCM88650=2
+dtm_flow_nof_remote_cores_region_53.BCM88650=2
+dtm_flow_nof_remote_cores_region_54.BCM88650=2
+dtm_flow_nof_remote_cores_region_55.BCM88650=2
+dtm_flow_nof_remote_cores_region_56.BCM88650=2
+dtm_flow_nof_remote_cores_region_57.BCM88650=2
+dtm_flow_nof_remote_cores_region_58.BCM88650=2
+dtm_flow_nof_remote_cores_region_59.BCM88650=2
+dtm_flow_nof_remote_cores_region_60.BCM88650=2
+#dtm_flow_nof_remote_cores_region_core0_2.BCM88675=2
+
+
+# Configure number of symmetric cores each region supports ##
+#device_core_mode.BCM88470=SINGLE_CORE
+# IL region has offset of 63, i.e. region_1 here will show as region 64 in code
+## Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88470=2
+dtm_flow_nof_remote_cores_region_2.BCM88470=2
+dtm_flow_nof_remote_cores_region_3.BCM88470=1
+dtm_flow_nof_remote_cores_region_4.BCM88470=1
+dtm_flow_nof_remote_cores_region_5.BCM88470=2
+dtm_flow_nof_remote_cores_region_6.BCM88470=1
+dtm_flow_nof_remote_cores_region_7.BCM88470=2
+dtm_flow_nof_remote_cores_region_8.BCM88470=2
+dtm_flow_nof_remote_cores_region_9.BCM88470=1
+dtm_flow_nof_remote_cores_region_10.BCM88470=1
+dtm_flow_nof_remote_cores_region_11.BCM88470=1
+dtm_flow_nof_remote_cores_region_12.BCM88470=1
+dtm_flow_nof_remote_cores_region_13.BCM88470=1
+dtm_flow_nof_remote_cores_region_14.BCM88470=1
+dtm_flow_nof_remote_cores_region_15.BCM88470=1
+dtm_flow_nof_remote_cores_region_16.BCM88470=1
+dtm_flow_nof_remote_cores_region_17.BCM88470=1
+dtm_flow_nof_remote_cores_region_18.BCM88470=2
+dtm_flow_nof_remote_cores_region_19.BCM88470=1
+dtm_flow_nof_remote_cores_region_20.BCM88470=1
+dtm_flow_nof_remote_cores_region_21.BCM88470=1
+dtm_flow_nof_remote_cores_region_22.BCM88470=1
+dtm_flow_nof_remote_cores_region_23.BCM88470=1
+dtm_flow_nof_remote_cores_region_24.BCM88470=1
+dtm_flow_nof_remote_cores_region_25.BCM88470=1
+dtm_flow_nof_remote_cores_region_26.BCM88470=1
+dtm_flow_nof_remote_cores_region_27.BCM88470=1
+dtm_flow_nof_remote_cores_region_28.BCM88470=1
+dtm_flow_nof_remote_cores_region_29.BCM88470=1
+dtm_flow_nof_remote_cores_region_30.BCM88470=1
+dtm_flow_nof_remote_cores_region_31.BCM88470=1
+dtm_flow_nof_remote_cores_region_32.BCM88470=1
+dtm_flow_nof_remote_cores_region_33.BCM88470=1
+dtm_flow_nof_remote_cores_region_34.BCM88470=1
+dtm_flow_nof_remote_cores_region_35.BCM88470=1
+dtm_flow_nof_remote_cores_region_36.BCM88470=1
+
+dtm_flow_nof_remote_cores_region_37.BCM88470=1
+dtm_flow_nof_remote_cores_region_38.BCM88470=1
+dtm_flow_nof_remote_cores_region_39.BCM88470=1
+dtm_flow_nof_remote_cores_region_40.BCM88470=1
+dtm_flow_nof_remote_cores_region_41.BCM88470=1
+dtm_flow_nof_remote_cores_region_42.BCM88470=1
+dtm_flow_nof_remote_cores_region_43.BCM88470=1
+dtm_flow_nof_remote_cores_region_44.BCM88470=1
+dtm_flow_nof_remote_cores_region_45.BCM88470=1
+dtm_flow_nof_remote_cores_region_46.BCM88470=1
+dtm_flow_nof_remote_cores_region_47.BCM88470=1
+dtm_flow_nof_remote_cores_region_48.BCM88470=1
+dtm_flow_nof_remote_cores_region_49.BCM88470=1
+dtm_flow_nof_remote_cores_region_50.BCM88470=1
+dtm_flow_nof_remote_cores_region_51.BCM88470=1
+dtm_flow_nof_remote_cores_region_52.BCM88470=1
+dtm_flow_nof_remote_cores_region_53.BCM88470=1
+dtm_flow_nof_remote_cores_region_54.BCM88470=1
+dtm_flow_nof_remote_cores_region_55.BCM88470=1
+dtm_flow_nof_remote_cores_region_56.BCM88470=1
+dtm_flow_nof_remote_cores_region_57.BCM88470=1
+dtm_flow_nof_remote_cores_region_58.BCM88470=1
+dtm_flow_nof_remote_cores_region_59.BCM88470=1
+dtm_flow_nof_remote_cores_region_60.BCM88470=1
+
+dtm_flow_mapping_mode_region_33.BCM88470=0
+dtm_flow_mapping_mode_region_34.BCM88470=0
+dtm_flow_mapping_mode_region_35.BCM88470=0
+dtm_flow_mapping_mode_region_36.BCM88470=0
+dtm_flow_mapping_mode_region_37.BCM88470=0
+dtm_flow_mapping_mode_region_38.BCM88470=0
+dtm_flow_mapping_mode_region_39.BCM88470=0
+dtm_flow_mapping_mode_region_40.BCM88470=0
+
+## Configure number of symmetric cores each region supports ##
+dtm_flow_nof_remote_cores_region_1.BCM88270=2
+dtm_flow_nof_remote_cores_region_2.BCM88270=2
+dtm_flow_nof_remote_cores_region_3.BCM88270=2
+dtm_flow_nof_remote_cores_region_4.BCM88270=2
+dtm_flow_nof_remote_cores_region_5.BCM88270=2
+dtm_flow_nof_remote_cores_region_6.BCM88270=2
+dtm_flow_nof_remote_cores_region_7.BCM88270=2
+dtm_flow_nof_remote_cores_region_8.BCM88270=2
+dtm_flow_nof_remote_cores_region_9.BCM88270=2
+dtm_flow_nof_remote_cores_region_10.BCM88270=2
+dtm_flow_nof_remote_cores_region_11.BCM88270=2
+dtm_flow_nof_remote_cores_region_12.BCM88270=2
+dtm_flow_nof_remote_cores_region_13.BCM88270=2
+dtm_flow_nof_remote_cores_region_14.BCM88270=2
+dtm_flow_nof_remote_cores_region_15.BCM88270=2
+dtm_flow_nof_remote_cores_region_16.BCM88270=2
+dtm_flow_nof_remote_cores_region_17.BCM88270=2
+dtm_flow_nof_remote_cores_region_18.BCM88270=2
+dtm_flow_nof_remote_cores_region_19.BCM88270=1
+dtm_flow_nof_remote_cores_region_20.BCM88270=1
+dtm_flow_nof_remote_cores_region_21.BCM88270=1
+dtm_flow_nof_remote_cores_region_22.BCM88270=1
+dtm_flow_nof_remote_cores_region_23.BCM88270=1
+dtm_flow_nof_remote_cores_region_24.BCM88270=1
+dtm_flow_nof_remote_cores_region_25.BCM88270=1
+dtm_flow_nof_remote_cores_region_26.BCM88270=1
+dtm_flow_nof_remote_cores_region_27.BCM88270=1
+dtm_flow_nof_remote_cores_region_28.BCM88270=1
+dtm_flow_nof_remote_cores_region_29.BCM88270=1
+dtm_flow_nof_remote_cores_region_30.BCM88270=1
+dtm_flow_nof_remote_cores_region_31.BCM88270=1
+dtm_flow_nof_remote_cores_region_32.BCM88270=1
+
+dtm_flow_mapping_mode_region_17.BCM88270=0
+dtm_flow_mapping_mode_region_18.BCM88270=0
+dtm_flow_mapping_mode_region_19.BCM88270=0
+dtm_flow_mapping_mode_region_20.BCM88270=0
+
+### Flow Control configuration ###
+# Set the Flow control type per Port.
+# Options: LL (Link-level) / CB2 (Class-Based - 2 classes) /
+# CB8 (Class-Based - 8 classes)
+# flow_control_type.BCM88650=LL
+
+## Out-Of-Band Flow control configuration
+#spn_FC_OOB_TYPE, spn_FC_OOB_MODE, spn_FC_OOB_CALENDER_LENGTH, spn_FC_OOB_CALENDER_REP_COUNT,
+
+## Set voltage mode for oob interfaces
+#HSTL_1.5V
+#3.3V
+#HSTL_1.5V_VDDO_DIV_2
+ext_voltage_mode_oob=3.3V
+
+## Inband Interlaken configuration
+# spn_FC_INBAND_INTLKN_MODE, spn_FC_INBAND_INTLKN_CALENDER_LENGTH, spn_FC_INBAND_INTLKN_CALENDER_REP_COUNT
+# spn_FC_INBAND_INTLKN_CALENDER_LLFC_MODE, spn_FC_INBAND_INTLKN_LLFC_MUB_ENABLE_MASK
+
+### Meter engine configuration ###
+
+# Specify meter operation mode
+# 32 - Two meters per packet (32k total)
+# 64 - One meter per packet (64k total) or two meter per packet in dual core device configured as SINGLE_CORE (128K total)
+# 128 - One meter per packet in dual core device configured as SINGLE_CORE (128K total)
+# Options: 0, 32, 64, 128
+policer_ingress_count.BCM88650=32
+policer_ingress_count.BCM88470=32
+policer_ingress_count.BCM88270=32
+policer_ingress_count.BCM88680=32
+
+
+# For meters in double 32k/64K mode, determine the sharing mode
+# Options:
+# 0 - NONE - For 64k or 128K (one meter per packet)
+# 1 - SERIAL - 32k mode only (two meters per packet)
+# 2 - PARALLEL - For 32k or 64k (two meter per packet)
+policer_ingress_sharing_mode.BCM88650=1
+policer_ingress_sharing_mode.BCM88470=1
+policer_ingress_sharing_mode.BCM88270=1
+policer_ingress_sharing_mode.BCM88680=1
+
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine the mapping
+# Options: BEST, WORST
+# policer_result_parallel_color_map.BCM88650=WORST
+
+# Applies only to Arad+ (88660)
+# For meters in parallel mode, determine how the buckets are changed
+# Options: CONSTANT, TRANSPARENT, DEFERRED
+# policer_result_parallel_bucket_update.BCM88650=CONSTANT
+
+# Applies only to Arad+ (88660)
+# Set the Ethernet policer to work in color blind mode
+# rate_color_blind.BCM88650=1
+
+# L2 learn limit mode
+# Options: VLAN, VLAN_PORT, TUNNEL or the numeric equivalent 0-2.
+# Default: VLAN
+# l2_learn_limit_mode = VLAN_PORT
+
+# Applies only to Arad+ (88660)
+# Determines the L2 learn limit ranges when l2_learn_limit_mode is set to VLAN_PORT
+# Two range bases can be selected, each of 16K size.
+# Options: 0, 16K, 32K, 48K.
+# Default: 0 & 16K
+# l2_learn_lif_range_base_0 = 0
+# l2_learn_lif_range_base_1 = 16K
+
+# SW shadow mode for exact match tables. Required for SER support and DBAL diagnostics.
+#   0 - Disabled (Default)
+#   1 - Enabled
+#   2 - Disabled for LEM, enabled for other exact match tables
+exact_match_tables_shadow_enable.BCM88650 = 1
+exact_match_tables_shadow_enable.BCM88675 = 2
+
+# determine how many cmcs connected to the CPU. 
+# default value = 1
+# applies only to jericho and above. 
+pci_cmcs_num.88675 = 3
+pci_cmcs_num.88470 = 3
+
+### Counter engine configuration ###
+
+# Set the Counter source
+# Options: INGRESS_FIELD / INGRESS_VOQ / INGRESS_VSQ / INGRESS_CNM / 
+# INGRESS_LATENCY / EGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM (per queue) / EGRESS_TM_PORT (per port)
+# EGRESS_RECEIVE_VSI / EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM (per queue) / EGRESS_RECEIVE_TM_PORT (per port)
+# INGRESS_OAM / EGRESS_OAM
+# 2 Counter-Pointers can be set (with _0 and _1) for
+# INGRESS_FIELD / EGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT
+# Range extension can be set (with _LSB and _MSB) for
+# INGRESS_FIELD / EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT /EGRESS_RECEIVE_VSI /
+# EGRESS_RECEIVE_OUT_LIF / EGRESS_RECEIVE_TM / EGRESS_RECEIVE_TM_PORT
+counter_engine_source_0.BCM88650=INGRESS_FIELD_0
+counter_engine_source_1.BCM88650=INGRESS_FIELD_1
+counter_engine_source_2.BCM88650=INGRESS_VOQ
+counter_engine_source_3.BCM88650=EGRESS_FIELD
+
+# Configure the statistic interface egress transmit PP source and the ingress received PP source
+# Options for egress: EGRESS_VSI / EGRESS_OUT_LIF / EGRESS_TM / EGRESS_TM_PORT (the default is TM)
+# Options for ingress: INGRESS_VSI / INGRESS_IN_LIF / INGRESS_TM (the default is TM)
+# valid just when there is no conflict with the other counter engines
+#counter_engine_source_egress_pp_stat0.BCM88650=EGRESS_TM
+#counter_engine_source_egress_pp_stat1.BCM88650=EGRESS_VSI
+#counter_engine_source_ingress_pp_stat0.BCM88650=INGRESS_IN_LIF
+#counter_engine_source_ingress_pp_stat1.BCM88650=INGRESS_TM
+
+
+# Set the Counter engine resolution
+# SIMPLE_COLOR = green, not green
+# SIMPLE_COLOR_FWD = fwd green, fwd not green (BCM88660_A0 only)
+# SIMPLE_COLOR_DROP = drop green, drop not green (BCM88660_A0 only)
+# FWD_DROP = forwarded, dropped
+# GREEN_NOT_GREEN = fwd grn, drop grn, fwd not grn, drop not grn
+# FULL_COLOR = fwd grn, drop grn, fwd not grn, drop yel, drop red
+# ALL = received
+# FWD = forwarded, DROP = droped (not supported by ARAD_A0)
+# CONFIGURABLE = defined by counter_engine_map_ SOC properties (BCM88660_A0 only)
+counter_engine_statistics_0.BCM88650=FULL_COLOR
+counter_engine_statistics_1.BCM88650=FULL_COLOR
+counter_engine_statistics_2.BCM88650=FULL_COLOR
+counter_engine_statistics_3.BCM88650=FULL_COLOR
+
+# Set the Counter format
+# Options: PACKETS_AND_BYTES / PACKETS / BYTES
+# / MAX_QUEUE_SIZE / LATENCY / PACKETS_AND_PACKETS(supported just in FWD_DROP statistic in BCM88660_A0)
+# If not PACKETS_AND_BYTES or PACKETS_AND_PACKETS, the HW Counter width is 59 bits, thus
+# no background SW operation is performed
+counter_engine_format_0.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_1.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_2.BCM88650=PACKETS_AND_BYTES
+counter_engine_format_3.BCM88650=PACKETS_AND_BYTES
+
+# #enable/disable counter processor background thread (default:1-enable)
+# counter_engine_sampling_interval=1
+
+
+### Configurable mode configuration (BCM88660_A0 only)###
+# counter_engine_statistics_0.BCM88660_A0=CONFIGURABLE
+# counter_engine_map_enable_0.BCM88660_A0=1
+# counter_engine_map_size_0.BCM88660_A0=4
+# counter_engine_map_fwd_green_offset_0.BCM88660_A0=0
+# counter_engine_map_fwd_yellow_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_red_offset_0.BCM88660_A0=1
+# counter_engine_map_fwd_black_offset_0.BCM88660_A0=2
+# counter_engine_map_drop_green_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_yellow_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_red_offset_0.BCM88660_A0=3
+# counter_engine_map_drop_black_offset_0.BCM88660_A0=3
+
+### Statistic-Report configuration ###
+# Enable the Statistic-Interface configuration
+# stat_if_enable_<port> - not supported by ARAD_A0
+# stat_if_enable.BCM88650=1
+
+# ## Statistic-Report Properties
+# # Set Statistic-Report interface rate in Mbps
+# # If Value is '0' the statistics port rate will be used. Default: 0.
+# stat_if_rate.BCM88650=0
+# # Set the Statistic-Report mode
+# # Options: BILLING / BILLING_QUEUE_NUMBER (not supported by ARAD_A0)/ QSIZE
+# stat_if_report_mode.BCM88650=QSIZE
+# #Indicate if idle reports must be sent
+# #when the Statistic-report rate is too low
+# stat_if_idle_reports_present.BCM88650=0
+# # Indicate if the reported packet size is the original packet size
+# stat_if_report_original_pkt_size.BCM88650=1
+# #If set then a single ingress-billing report will be generated
+# #for the whole set of the multicast copies
+# stat_if_report_multicast_single_copy=1
+# ## Statistic Packet configurations
+# # Set the Statistic Packet size (Bytes)
+# # Valid values: 65B/126B/248B/492B (Queue-Size), 64B/128B/256B/512B/1024B (Billing).
+# stat_if_pkt_size=64B
+#
+# ## Scrubber configuration
+# # Set the range of VOQs to scrub. Range: 0 - 96K-1.
+# stat_if_scrubber_queue_min.BCM88650=0
+# stat_if_scrubber_queue_max.BCM88650=0
+#
+# # Set the scrubber rate range
+# # If set to 0 (default), the scrubber is disabled. Units: nanoseconds
+# stat_if_scrubber_rate_min.BCM88650=0
+# stat_if_scrubber_rate_max.BCM88650=0
+#
+# # Set the thresholds (thresh_id 0 - 15) defining
+# # occupancy range per resource type:
+# # DRAM Buffers, Buffer descriptors, Buffer descriptors buffers
+# stat_if_scrubber_bdb_th.BCM88650=0
+# stat_if_scrubber_buffer_descr_th.BCM88650=0
+# stat_if_uc_dram_buffer_descr_th.BCM88650=0
+#
+# #Relective report for queue size mode - not supported by ARAD_A0
+# #Reports will be created for queue num range (stat_if_selective_report_queue_min -stat_if_selective_report_queue_max)
+# #Default - all range
+# stat_if_selective_report_queue_min.BCM88650_B0=0
+# stat_if_selective_report_queue_max.BCM88650_B0=98303
+
+### Transaction - DMA configuration ###
+# Time to wait for SCHAN channel response (from CMIC). Units: microseconds.
+
+
+### Counter threads ###
+# # set port bitmap on which statistics collection will be enabled (default all ports)
+# bcm_stat_pbmp.BCM88675=0xfffffffff000000000000000000000000000000000000000000000000000000000003e002
+#
+# # set statistics collection interval in microseconds (default is 1000000)
+# bcm_stat_interval.BCM88675=1000000
+
+### Control optimization of cosq port initializations: speed for memory ###
+runtime_performance_optimize_enable_sched_allocation.BCM88650=1
+runtime_performance_optimize_enable_sched_allocation.BCM88675=1
+
+### static tables initiation (Supported for Jericho) ###
+# Options: 1 - initiating static tables, 0 - doesn't initiate tables (Default Value for PCID/emulation)
+#custom_feature_static_tbl_full_init.BCM88675=1
+#custom_feature_dynamic_tbl_full_init.BCM88675=1
+
+### Interrupts ###
+## Set interrupts global parameters.
+# Options: 1 - Polling interrupt mode, 0 - Line/MSI interrupt mode. Default: 1.
+polled_irq_mode.BCM88650=0
+polled_irq_mode.BCM88675=0
+#  Set the delay in microsecond between the polling, relevant only to Polling mode.  Default: 0x0.
+polled_irq_delay.BCM88650=50000
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling, relevant only to Polling completion mode.
+# SCHAN:
+#schan_intr_enable.0=1
+schan_timeout_usec.BCM88650=300000
+# TDMA
+tdma_intr_enable.BCM88650=1
+tdma_intr_enable.BCM88675=0
+tdma_timeout_usec.BCM88650=5000000
+tdma_timeout_usec.BCM88675=560000000
+# TSLAM
+tslam_intr_enable.BCM88650=1
+tslam_intr_enable.BCM88675=0
+tslam_timeout_usec.BCM88650=5000000
+tslam_timeout_usec.BCM88675=560000000
+# MIIM
+#miim_intr_enable.0=1
+miim_timeout_usec.0=300000
+
+### DRAM configuration ###
+
+# DRAM buffer (Dbuff) size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88650=1024
+ext_ram_dbuff_size.BCM88470=4096
+ext_ram_dbuff_size.BCM88270=4096
+
+# Number of external DRAMs.
+# Allowed values for 88650: 0/2/3/4/6/8.
+# Allowed values for 88660: 0/1/2/3/4/6/8. A value of 1 is permitted only in ONE WAY BYPASS ocb mode.
+# Allowed values for 88675: 0/2/3/41/42/6/8. '41' - configure 4 drams in Single Side mode (A, B, C, D).
+#                                            '42' - configure 4 drams in symmetric mode (A, C, F, H).
+# Value of 0 disables the DRAM.
+ext_ram_present.BCM88650=8
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+ext_ram_present.BCM88470=3
+ext_ram_present.BCM88270=1
+
+### Dram Tuning (Shmoo)
+# 3 = Skip Dram Tuning (Shmoo).
+# 2 = Use Dram saved config Parameters, if no Parameters Perform Shmoo on init. Default option.
+# 1 = Perform Shmoo on init.
+# 0 = Use Dram saved config Parameters, if no Parameters do nothing.
+ddr3_auto_tune.BCM88650=2
+ddr3_auto_tune.BCM88270=2
+ddr3_auto_tune.BCM88470=2
+
+##### DDR Tuning parameters for IL SVK4
+combo28_tune_dq_wr_min_vdl_byte3_ci1.0=0x00000004,0x00000003,0x00000007,0x00000003,0x00000002,0x00000000,0x00000006,0x00000004,
+combo28_tune_dq_rd_min_vdl_byte1_ci2.0=0x00000017,0x00000014,0x00000016,0x00000014,0x00000017,0x00000018,0x00000017,0x00000017,
+combo28_tune_common_macro_reserved_reg_ci0.0=0x00000000,
+combo28_tune_control_regs_reserved_reg_ci1.0=0x00000003,
+combo28_tune_control_regs_read_clock_config_ci0.0=0x00000002,
+combo28_tune_dq_rd_min_vdl_byte2_ci0.0=0x00000018,0x00000017,0x00000017,0x00000018,0x00000017,0x00000014,0x00000015,0x00000017,
+combo28_tune_dq_read_max_vdl_fsm_ci1.0=0x0000004c,0x0000004c,0x0000004c,0x0000004c,
+combo28_tune_aq_u_max_vdl_ctrl_ci1.0=0x00000214,
+combo28_tune_dq_rd_max_vdl_dqsn_ci1.0=0x00000017,0x00000019,0x0000002d,0x0000002d,
+combo28_tune_dq_ren_fifo_config_ci0.0=0x00000090,0x00000090,0x00000090,0x00000090,
+combo28_tune_dq_wr_min_vdl_dbi_ci1.0=0x00000001,0x00000004,0x00000002,0x00000003,
+combo28_tune_aq_u_macro_reserved_reg_ci0.0=0x00000000,
+combo28_tune_dq_rd_min_vdl_edc_ci1.0=0x00000016,0x00000016,0x00000017,0x0000001a,
+combo28_tune_aq_l_max_vdl_addr_ci1.0=0x00000214,
+combo28_tune_dq_wr_max_vdl_data_ci2.0=0x00000238,0x00000406,0x00000247,0x00000416,
+combo28_tune_dq_wr_min_vdl_byte3_ci2.0=0x00000000,0x00000003,0x00000000,0x00000000,0x00000000,0x00000003,0x00000001,0x00000001,
+combo28_tune_common_macro_reserved_reg_ci1.0=0x00000000,
+combo28_tune_control_regs_reserved_reg_ci2.0=0x00000003,
+combo28_tune_control_regs_read_clock_config_ci1.0=0x00000002,
+combo28_tune_dq_rd_min_vdl_byte2_ci1.0=0x00000015,0x00000015,0x00000019,0x00000017,0x00000014,0x00000016,0x00000018,0x00000016,
+combo28_tune_dq_read_max_vdl_fsm_ci2.0=0x0000004d,0x0000004d,0x0000004d,0x0000004d,
+combo28_tune_aq_u_max_vdl_ctrl_ci2.0=0x00000048,
+combo28_tune_dq_rd_max_vdl_dqsn_ci2.0=0x00000023,0x00000022,0x0000002c,0x00000020,
+combo28_tune_dq_ren_fifo_config_ci1.0=0x00000090,0x00000090,0x00000090,0x00000090,
+combo28_tune_dq_wr_min_vdl_dbi_ci2.0=0x00000002,0x00000001,0x00000003,0x00000001,
+combo28_tune_aq_u_macro_reserved_reg_ci1.0=0x00000000,
+combo28_tune_dq_rd_min_vdl_edc_ci2.0=0x00000016,0x00000017,0x00000016,0x00000017,
+combo28_tune_aq_l_max_vdl_addr_ci2.0=0x00000048,
+combo28_tune_control_regs_ren_fifo_central_initializer_ci0.0=0x0000000f,
+combo28_tune_common_macro_reserved_reg_ci2.0=0x00000000,
+combo28_tune_control_regs_read_clock_config_ci2.0=0x00000002,
+combo28_tune_dq_rd_min_vdl_byte2_ci2.0=0x00000018,0x00000016,0x00000015,0x00000014,0x00000015,0x00000015,0x00000014,0x00000015,
+combo28_tune_dq_wr_min_vdl_byte0_ci0.0=0x00000001,0x00000002,0x00000000,0x00000002,0x00000002,0x00000003,0x00000004,0x00000001,
+combo28_tune_dq_ren_fifo_config_ci2.0=0x00000090,0x00000090,0x00000090,0x00000090,
+combo28_tune_dq_rd_min_vdl_byte3_ci0.0=0x00000019,0x00000017,0x0000001a,0x0000001c,0x00000017,0x00000018,0x00000014,0x00000014,
+combo28_tune_aq_u_macro_reserved_reg_ci2.0=0x00000000,
+combo28_tune_control_regs_ren_fifo_central_initializer_ci1.0=0x0000000f,
+combo28_tune_aq_l_max_vdl_ctrl_ci0.0=0x00000201,
+combo28_tune_control_regs_input_shift_ctrl_ci0.0=0x00000070,
+combo28_tune_dq_wr_min_vdl_byte0_ci1.0=0x00000005,0x00000001,0x00000000,0x00000000,0x00000001,0x00000000,0x00000000,0x00000003,
+combo28_tune_dq_rd_min_vdl_byte3_ci1.0=0x00000018,0x00000017,0x0000001c,0x0000001d,0x00000014,0x00000017,0x0000001e,0x0000001d,
+combo28_tune_control_regs_ren_fifo_central_initializer_ci2.0=0x0000000f,
+combo28_tune_dq_rd_max_vdl_dqsp_ci0.0=0x00000018,0x00000019,0x00000025,0x0000002b,
+combo28_tune_aq_l_max_vdl_ctrl_ci1.0=0x00000214,
+combo28_tune_control_regs_input_shift_ctrl_ci1.0=0x00000070,
+combo28_tune_dq_wr_min_vdl_byte0_ci2.0=0x00000000,0x00000005,0x00000003,0x00000003,0x00000003,0x00000003,0x00000003,0x00000002,
+combo28_tune_dq_wr_min_vdl_edc_ci0.0=0x00000000,0x00000000,0x00000000,0x00000000,
+combo28_tune_dq_rd_min_vdl_byte3_ci2.0=0x00000015,0x00000017,0x00000014,0x00000015,0x00000016,0x00000018,0x00000018,0x00000019,
+combo28_tune_dq_wr_min_vdl_byte1_ci0.0=0x00000002,0x00000002,0x00000002,0x00000003,0x00000002,0x00000001,0x00000002,0x00000000,
+combo28_tune_control_regs_edcen_fifo_central_init_ci0.0=0x00000000,
+combo28_tune_dq_macro_reserved_reg_ci0.0=0x00000026,0x00000026,0x00000025,0x00000026,
+combo28_tune_dq_rd_max_vdl_dqsp_ci1.0=0x00000017,0x00000019,0x0000002d,0x0000002d,
+combo28_tune_aq_l_max_vdl_ctrl_ci2.0=0x00000048,
+combo28_tune_control_regs_input_shift_ctrl_ci2.0=0x00000070,
+combo28_tune_dq_rd_min_vdl_dbi_ci0.0=0x00000016,0x00000017,0x00000017,0x00000018,
+combo28_tune_dq_wr_min_vdl_edc_ci1.0=0x00000000,0x00000000,0x00000000,0x00000000,
+combo28_tune_dq_wr_min_vdl_byte1_ci1.0=0x00000006,0x00000007,0x00000005,0x00000005,0x00000000,0x00000001,0x00000007,0x00000005,
+combo28_tune_dq_edcen_fifo_config_ci0.0=0x00000080,0x00000080,0x00000080,0x00000080,
+combo28_tune_control_regs_edcen_fifo_central_init_ci1.0=0x00000000,
+combo28_tune_dq_vref_dac_config_ci0.0=0x00760000,0x00740000,0x00800000,0x007c0000,
+combo28_tune_dq_macro_reserved_reg_ci1.0=0x00000026,0x0000002a,0x00000028,0x00000029,
+combo28_tune_dq_rd_max_vdl_dqsp_ci2.0=0x00000023,0x00000022,0x0000002c,0x00000020,
+combo28_tune_dq_rd_min_vdl_byte0_ci0.0=0x00000016,0x00000014,0x00000014,0x00000016,0x00000015,0x00000015,0x00000016,0x00000016,
+combo28_tune_dq_rd_min_vdl_dbi_ci1.0=0x00000016,0x00000016,0x00000017,0x0000001a,
+combo28_tune_aq_u_max_vdl_addr_ci0.0=0x00000201,
+combo28_tune_dq_wr_max_vdl_dqs_ci0.0=0x00000440,0x0000044a,0x00000422,0x00000430,
+combo28_tune_dq_wr_min_vdl_edc_ci2.0=0x00000000,0x00000000,0x00000000,0x00000000,
+combo28_tune_dq_wr_min_vdl_byte1_ci2.0=0x00000003,0x00000000,0x00000002,0x00000001,0x00000002,0x00000001,0x00000004,0x00000001,
+combo28_tune_dq_edcen_fifo_config_ci1.0=0x00000080,0x00000080,0x00000080,0x00000080,
+combo28_tune_control_regs_edcen_fifo_central_init_ci2.0=0x00000000,
+combo28_tune_dq_vref_dac_config_ci1.0=0x007e0000,0x007a0000,0x00820000,0x00820000,
+combo28_tune_dq_macro_reserved_reg_ci2.0=0x00000028,0x00000028,0x0000002a,0x0000002b,
+combo28_tune_dq_wr_min_vdl_byte2_ci0.0=0x00000001,0x00000000,0x00000003,0x00000002,0x00000005,0x00000005,0x00000003,0x00000005,
+combo28_tune_dq_rd_min_vdl_byte0_ci1.0=0x00000015,0x00000017,0x00000017,0x00000017,0x00000017,0x00000015,0x00000014,0x00000015,
+combo28_tune_dq_rd_min_vdl_dbi_ci2.0=0x00000016,0x00000017,0x00000016,0x00000017,
+combo28_tune_control_regs_shared_vref_dac_config_ci0.0=0x00920000,
+combo28_tune_aq_u_max_vdl_addr_ci1.0=0x00000214,
+combo28_tune_dq_wr_max_vdl_dqs_ci1.0=0x00000440,0x00000446,0x0000042d,0x00000434,
+combo28_tune_dq_edcen_fifo_config_ci2.0=0x00000080,0x00000080,0x00000080,0x00000080,
+combo28_tune_aq_l_macro_reserved_reg_ci0.0=0x00000000,
+combo28_tune_dq_vref_dac_config_ci2.0=0x00840000,0x007e0000,0x008a0000,0x00820000,
+combo28_tune_dq_wr_min_vdl_byte2_ci1.0=0x00000000,0x00000001,0x00000002,0x00000004,0x00000003,0x00000000,0x00000004,0x00000007,
+combo28_tune_dq_rd_min_vdl_byte0_ci2.0=0x00000014,0x00000015,0x00000015,0x00000014,0x00000016,0x00000017,0x00000015,0x00000016,
+combo28_tune_control_regs_shared_vref_dac_config_ci1.0=0x00920000,
+combo28_tune_aq_u_max_vdl_addr_ci2.0=0x00000048,
+combo28_tune_dq_wr_max_vdl_dqs_ci2.0=0x00000424,0x00000435,0x0000043c,0x00000444,
+combo28_tune_dq_rd_min_vdl_byte1_ci0.0=0x00000017,0x00000017,0x00000018,0x00000018,0x00000014,0x00000015,0x00000015,0x00000015,
+combo28_tune_aq_l_macro_reserved_reg_ci1.0=0x00000000,
+combo28_tune_dq_wr_min_vdl_byte2_ci2.0=0x00000004,0x00000000,0x00000004,0x00000005,0x00000002,0x00000003,0x00000004,0x00000004,
+combo28_tune_dq_wr_max_vdl_data_ci0.0=0x00000416,0x00000428,0x00000232,0x00000241,
+combo28_tune_control_regs_shared_vref_dac_config_ci2.0=0x00920000,
+combo28_tune_dq_wr_min_vdl_byte3_ci0.0=0x00000005,0x00000005,0x00000005,0x00000004,0x00000003,0x00000003,0x00000003,0x00000000,
+combo28_tune_dq_rd_min_vdl_byte1_ci1.0=0x00000018,0x00000018,0x00000018,0x00000014,0x00000014,0x00000014,0x00000018,0x00000014,
+combo28_tune_aq_l_macro_reserved_reg_ci2.0=0x00000000,
+combo28_tune_control_regs_reserved_reg_ci0.0=0x00000003,
+combo28_tune_dq_read_max_vdl_fsm_ci0.0=0x0000004b,0x0000004b,0x0000004b,0x0000004b,
+combo28_tune_aq_u_max_vdl_ctrl_ci0.0=0x00000201,
+combo28_tune_dq_rd_max_vdl_dqsn_ci0.0=0x00000018,0x00000019,0x00000025,0x0000002b,
+combo28_tune_dq_wr_min_vdl_dbi_ci0.0=0x00000001,0x00000001,0x00000003,0x00000003,
+combo28_tune_dq_rd_min_vdl_edc_ci0.0=0x00000016,0x00000017,0x00000017,0x00000018,
+combo28_tune_aq_l_max_vdl_addr_ci0.0=0x00000201,
+combo28_tune_dq_wr_max_vdl_data_ci1.0=0x00000414,0x0000041e,0x00000234,0x00000245,
+
+### Enable BIST
+# Run Dram BIST on initialization, if BIST fail the initialization will fail. Defult: 1.
+# bist_enable_dram.BCM88650=1
+bist_enable_dram.BCM88270=1
+bist_enable_dram.BCM88470=1
+
+### Example for Dram Saved config Parameters.
+## This example is for ci=14 (Dram=7).
+#ddr3_tune_addrc_ci14=0x000000ae
+#ddr3_tune_wr_dq_wl1_ci14=0x92929292,0x92929292,0x92929292,0x92929292
+#ddr3_tune_wr_dq_wl0_ci14=0x93939393,0x93939393,0x92929292,0x92929292
+#ddr3_tune_wr_dq_ci14=0x80808080
+#ddr3_tune_vref_ci14=0x000007df
+#ddr3_tune_rd_dqs_ci14=0x96969191,0x90909191
+#ddr3_tune_rd_dq_wl1_rn_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rn_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_dq_wl1_rp_ci14=0x82828282,0x82828282,0x82828282,0x82828282
+#ddr3_tune_rd_dq_wl0_rp_ci14=0x82828282,0x82828282,0x89898989,0x89898989
+#ddr3_tune_rd_en_ci14=0x009d9e9d,0x00a2a3a1
+#ddr3_tune_rd_data_dly_ci14=0x00000505
+
+
+### Dram type: Select ONLY ONE of the following DRAM types, to configure all dram related parameteres per type.
+
+# Dram Type for Arad:
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_933=1
+#dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_800=1
+#dram_type_DDR3_MICRON_MT41J256M16_4GBIT_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_1066=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_933=1
+#dram_type_DDR3_MICRON_MT41J128M16HA_125_800=1
+#dram_type_DDR3_MICRON_MT42J64M16LA_15E_667=1
+#dram_type_DDR3_SAMSUNG_K4B4G1646B_4GBIT_1066=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_933=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646G_800=1
+
+# Dram Type for Jericho:
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#dram_type_DDR4_MICRON_Y4016AABG_JD_F_4GBIT=1
+dram_type_DDR4_MICRON_MT40A256M16HA_083EA_4GBIT=1
+#dram_type_DDR4_HYNIX_H5AN4G6NMFR_VJC_4GBIT=1
+#dram_type_GDDR5_SAMSUNG_K4G20325FD_2GBIT=1
+#dram_type_GDDR5_SAMSUNG_K4G41325FC_4GBIT=1
+#dram_type_GDDR5_MICRON_EDW4032CABG_4GBIT=1
+#dram_type_GDDR5_HYNIX_H5GC4H24MFR_T2C_4GBIT=1
+
+# Dram Type for Ardon:
+#dram_type_DDR4_MICRON_EDY4016AABG_DRFR_4GBIT=1
+
+# DRAM frequency
+ext_ram_freq.BCM88675=1600
+
+### Setting dram_type_DDR3_HYNIX_H5TQ2G63BFR_TEC_1066 Parameters as Default:
+## All other dram types parameter resides in arad.soc. choosing another Dram Type will override the following parameters.
+ext_ram_t_rrd=6000
+ext_ram_columns=1024
+ext_ram_banks=8
+ext_ram_ap_bit_pos=10
+ext_ram_burst_size=32
+ext_ram_t_ref=3900000
+ext_ram_t_wr=15000
+ext_ram_t_wtr=7500
+ext_ram_t_rtp=7500
+ext_ram_freq=1066
+ext_ram_rows=16384
+ext_ram_jedec=29
+ext_ram_t_rc=46090
+ext_ram_t_rcd_rd=13090
+ext_ram_t_rcd_wr=13090
+ext_ram_t_rp=13090
+ext_ram_t_rfc=160000
+ext_ram_t_ras=33000
+ext_ram_c_wr_latency=10
+ext_ram_t_faw=35000
+ext_ram_c_cas_latency=14
+ddr3_mem_grade=0x141414
+
+## address or bank address swap example
+#swaps are found in bcm88xxx_board.soc
+#ext_ram_addr_bank_swap_dramX_bitY=M
+
+## dq swap example
+#swaps are found in bcm88xxx_board.soc
+#bit swap example:
+#ext_ram_dq_swap_dramX_byteY_bitZ=M
+#byte swap example:
+#ext_ram_dq_swap_dramX_byteY=M
+
+## Dram Gear down mode. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+ext_ram_gear_down_mode.BCM88675=0
+
+## Alert_n de-assertion period above which error is considered parity error
+#ext_ram_alert_n_period_thrs.BCM88675=20
+
+## Dram Address bus inversion. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_abi.BCM88675=0
+
+## Data bus inversion on write/read direction. Valid values: 0 - Disable, 1 - Enable. Default: 0x0.
+## those socs are configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_write_dbi.BCM88675=0
+#ext_ram_read_dbi.BCM88675=0
+
+## Enable write/read CRC (DDR4 does not support read CRC). Default: 0x0.
+## those socs are configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_write_crc.BCM88675=1
+#ext_ram_read_crc.BCM88675=0
+
+## Command parity latency. Valid values: 0 - Disable, 4,5 or 6 - Valid values. Default: 0x0.
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_cmd_par_latency.BCM88675=6
+
+# DRAM pre-configurations according to config variables which defines
+# Dram Type. BCM88650 supports only DDR3.
+# Dram Type. BCM88675 supports DDR4 and GDDR5.
+ext_ram_type.BCM88650=DDR3
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_type.BCM88675=DDR4
+
+# Total Dram Size (MBytes)
+# For 8 drams interfaces, 2 channel each, Each channel 2Gbit Dram. the total DRAM size is 32GBits=4000MBytes.
+ext_ram_total_size.BCM88650=4000
+## this soc is configured in per board soc file (bcm88x7x_board.soc)
+#ext_ram_total_size.BCM88675=8000
+
+# Total buffer size allocated for User buffer. Units: Mbytes. Default: '0x0'.
+# Supported suffix:
+#       dram - the buffer size will be subtracted from the DRAM size available for packet memory.
+#user_buffer_size=0
+#user_buffer_size_dram=50
+
+# DRAM ClamShell (interface swap its HW PIN pairs during init.)
+# Note: Only one of DRAMs can have its PIN swapped
+# Valid values: 0/1
+#dram0_clamshell_enable.BCM88650=1
+#dram1_clamshell_enable.BCM88650=1
+
+# DRAM maximum number of crc error per buffer, buffer deleted by interrupt application.
+#dram_crc_del_buffer_max_reclaims=0
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+## If set, always configures synthesizers, even if the configured rate is equal to
+## their nominal rate. Can be disabled to speedup bringup time (keep in mind that if
+## disabled, changing a synt to a non-nominal freq and than back to nominal will not
+## work
+#synt_over.BCM88650=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88650=100000000
+synt_ddr.BCM88650=125000000
+synt_phy.BCM88650=156250000
+# in Jericho, this freq is used only for the core synth
+synth_dram_freq.BCM88650=25
+
+#Configure the reference clock frequencies for NIF and Fabric SerDes
+# Options:  0 - 125MHz, 1 - 156.25MHz, -1 - Disable
+serdes_nif_clk_freq.BCM88650=1
+serdes_fabric_clk_freq.BCM88650=1
+#serdes_nif_clk_freq.BCM88270=-1
+#serdes_fabric_clk_freq.BCM88270=-1
+serdes_nif_clk_freq.BCM8206=-1
+serdes_fabric_clk_freq.BCM8206=-1
+#serdes_nif_clk_freq_out0.BCM88675=1
+#serdes_nif_clk_freq_out1.BCM88675=1
+#serdes_nif_clk_freq_out2.BCM88675=1
+#serdes_nif_clk_freq_in0.BCM88675=1
+#serdes_nif_clk_freq_in1.BCM88675=1
+#serdes_nif_clk_freq_in2.BCM88675=1
+#serdes_fabric_clk_freq_out0.BCM88675=1
+#serdes_fabric_clk_freq_out1.BCM88675=1
+#serdes_fabric_clk_freq_in0.BCM88675=1
+#serdes_fabric_clk_freq_in1.BCM88675=1
+
+
+# IEEE 1588 / Broadsync -
+# configure clock :
+#  DPLL mode/lock: 0 - eci ts pll clk disabled, 1 - configure eci ts pll clk
+#  DPLL phase/freq. Default initial: lo = 0x40000000, hi = 0x10000000.
+#phy_1588_dpll_frequency_lock.BCM88650=1
+#phy_1588_dpll_phase_initial_lo.BCM88650=0x40000000
+#phy_1588_dpll_phase_initial_hi.BCM88650=0x10000000
+# IEEE 1588 -
+# port external MAC
+#  indication whether external MAC exists or not.
+#  0: 1588 external MAC does not exist
+#  1: 1588 external MAC exists
+#  the external MAC substracts the RX time from the correction field
+#  and adds the TX time to the correction field.
+#ext_1588_mac_enable_14.BCM88650=1
+#  If set, 48 bits stamping is used for 1588 packets. otherwise 32 bit stamping is used
+#  0: 1588 32b stamping (Default)
+#  1: 1588 48b stamping
+#bcm88660_1588_48b_stamping_enable.BCM88660=1
+
+## Trill configurations
+# Trill mode: 0 (disabled) / 1 (coarse-grained) / 2 (fine-grained)
+#trill_mode.BCM88650=1
+
+# Trill multicast prunning mode:
+# 0: no prunning - vsi is not part of the key
+# 1: VSI prunning: Key is dist-tree,esadit-bit,VSI.
+trill_mc_prune_mode.BCM88650=0
+
+# Enable SA authentication
+#sa_auth_enabled=1
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88650=0
+logical_port_drop.BCM88650=1
+
+#logical_port_mim_in.BCM88650=2
+#logical_port_mim_out.BCM88650=4096
+
+# Enable EVB application
+#evb_enable=1
+
+# Enable Flexible QinQ application
+#vlan_translation_match_ipv4=1
+
+# Enable presel mgmt advance mode
+#field_presel_mgmt_advanced_mode=1
+
+# Enable ITMH programmable mode
+# ITMH processing fully programmable (not fixed) by using the FP APIs. 
+# In this mode ITMH processing uses the TCAM/direct table for TM programs lookup, in same manner as Ethernet frames.
+itmh_programmable_mode_enable.BCM88675=1
+itmh_programmable_mode_enable.BCM88470=1
+itmh_programmable_mode_enable.BCM88270=1
+itmh_programmable_mode_enable.BCM88680=1
+
+
+
+# Prepend tag to be 4 bytes or 8 bytes. Default: 4B.
+# Applicable only from ARAD+
+#prepend_tag_bytes=4B
+
+# The Prepend Tag is located at (12 + 2*offset) bytes from the start of the packet.
+# Range: 0-7. Default: 0
+#prepend_tag_offset=0
+
+# Enable ARP (next hop mac extension) feature
+bcm886xx_next_hop_mac_extension_enable.BCM88650=1
+
+# Set VLAN translate mode.
+# 0: normal
+# 1: advanced mode. Enable vlan edit settings with enhanced user control
+#bcm886xx_vlan_translate_mode=0
+
+# Set MPLS termination database mode
+# Set MPLS databases location for each MPLS namespace (L1,L2,L3)
+#bcm886xx_mpls_termination_database_mode=0
+
+# Enable , Disable MPLS indexed.
+# MPLS termination with known label stack location.
+# Must be enabled in case device supports more than 2 MPLS label terminations (L1,L2,L3)
+#mpls_termination_label_index_enable=1
+
+# Enable FastReRoute labels in device.
+#fast_reroute_labels_enable=0
+
+# Enable MPLS Context specific. Upstream label assignment in device.
+#mpls_context_specific_label_enable=0
+
+# MPLS context.
+# Can be global, per port , per interface or per port,interface.
+#mpls_context=global
+
+# MPLS TP MC reserved mac address (01-00-5E-90-00-00).
+# If set device will support My-MAC termination of reserved MC Ethernet
+#mpls_tp_mymac_reserved_address=0
+
+# MPLS ELI enable disable
+mpls_entropy_label_indicator_enable=0
+
+#########################################
+##cfg for BCM88202 - Ardon
+#########################################
+
+#Core clock and system reference clock (KHz)
+core_clock_speed_khz.BCM88202=450000
+system_ref_core_clock_khz.BCM88202=1200000
+
+## Set TM as device mode
+fap_device_mode.BCM88202=TM
+
+## Set CPU ports header type
+tm_port_header_type_in_0.BCM88202=TM
+tm_port_header_type_out_0.BCM88202=TM
+tm_port_header_type_in_200.BCM88202=TM
+tm_port_header_type_out_200.BCM88202=TM
+tm_port_header_type_in_201.BCM88202=TM
+tm_port_header_type_out_201.BCM88202=TM
+tm_port_header_type_in_202.BCM88202=TM
+tm_port_header_type_out_202.BCM88202=TM
+tm_port_header_type_in_203.BCM88202=TM
+tm_port_header_type_out_203.BCM88202=TM
+
+##### Application configuration
+### Default SDK Application
+ucode_port_1.BCM88202=TM_INTERNAL_PKT.0
+ucode_port_13.BCM88202=TM_INTERNAL_PKT.1
+ucode_port_14.BCM88202=TM_INTERNAL_PKT.2
+ucode_port_15.BCM88202=TM_INTERNAL_PKT.3
+ucode_port_16.BCM88202=TM_INTERNAL_PKT.4
+ucode_port_17.BCM88202=TM_INTERNAL_PKT.5
+
+### PortOpriority (additonal ports can be added)
+#diag_cosq_disable.BCM88202=1
+#ucode_port_1.BCM88202=IGNORE
+#ucode_port_13.BCM88202=IGNORE
+#ucode_port_14.BCM88202=IGNORE
+#ucode_port_15.BCM88202=IGNORE
+#ucode_port_16.BCM88202=IGNORE
+#ucode_port_17.BCM88202=IGNORE
+#ucode_port_1.BCM88202=TM_INTERNAL_PKT.0
+#ucode_port_2.BCM88202=TM_INTERNAL_PKT.1
+#ucode_port_3.BCM88202=TM_INTERNAL_PKT.2
+#ucode_port_4.BCM88202=TM_INTERNAL_PKT.3
+#ucode_port_5.BCM88202=TM_INTERNAL_PKT.4
+#ucode_port_6.BCM88202=TM_INTERNAL_PKT.5
+#ucode_port_7.BCM88202=TM_INTERNAL_PKT.6
+#ucode_port_8.BCM88202=TM_INTERNAL_PKT.7
+#ucode_port_9.BCM88202=TM_INTERNAL_PKT.8
+#ucode_port_10.BCM88202=TM_INTERNAL_PKT.9
+#ucode_port_11.BCM88202=TM_INTERNAL_PKT.10
+#ucode_port_12.BCM88202=TM_INTERNAL_PKT.11
+#ucode_port_13.BCM88202=TM_INTERNAL_PKT.12
+#ucode_port_14.BCM88202=TM_INTERNAL_PKT.13
+#ucode_port_15.BCM88202=TM_INTERNAL_PKT.14
+#ucode_port_16.BCM88202=TM_INTERNAL_PKT.15
+#ucode_port_17.BCM88202=TM_INTERNAL_PKT.16
+#ucode_port_18.BCM88202=TM_INTERNAL_PKT.17
+#ucode_port_19.BCM88202=TM_INTERNAL_PKT.18
+#ucode_port_20.BCM88202=TM_INTERNAL_PKT.19
+#ucode_port_21.BCM88202=TM_INTERNAL_PKT.20
+#ucode_port_22.BCM88202=TM_INTERNAL_PKT.21
+#ucode_port_23.BCM88202=TM_INTERNAL_PKT.22
+#ucode_port_24.BCM88202=TM_INTERNAL_PKT.23
+#ucode_port_25.BCM88202=TM_INTERNAL_PKT.24
+
+#dtm_flow_nof_remote_cores_region_1.BCM88202=1
+#dtm_flow_nof_remote_cores_region_2.BCM88202=1
+#dtm_flow_nof_remote_cores_region_3.BCM88202=1
+#dtm_flow_nof_remote_cores_region_4.BCM88202=1
+#dtm_flow_nof_remote_cores_region_5.BCM88202=1
+#dtm_flow_nof_remote_cores_region_6.BCM88202=1
+#dtm_flow_nof_remote_cores_region_7.BCM88202=1
+#dtm_flow_nof_remote_cores_region_8.BCM88202=1
+#dtm_flow_nof_remote_cores_region_9.BCM88202=1
+#dtm_flow_nof_remote_cores_region_10.BCM88202=1
+
+### PriorityOPort
+#diag_cosq_disable.BCM88202=1
+#stack_enable.BCM88202=0
+#ucode_port_17.BCM88202=IGNORE
+#ucode_port_16.BCM88202=IGNORE
+#ucode_port_15.BCM88202=IGNORE
+#ucode_port_14.BCM88202=IGNORE
+#ucode_port_13.BCM88202=IGNORE
+#ucode_port_1.BCM88202=TM_INTERNAL_PKT.0
+
+## Credit worth resolution (Fix the Interface rate)
+credit_worth_resolution.BCM88202=medium
+
+### Interrupts
+polled_irq_mode.BCM88202=1
+
+## To use MC-ID in the range of < 255
+egress_multicast_direct_bitmap_max.BCM88202=255
+
+### Flow Control
+## Enable Flow Control to CL SCH. Relevant only to Priority Over Port application
+## Valid values: 1 - Enable, 0 - Disable. Default: 0x0.
+custom_feature_cl_scheduler_fc.BCM88202=1
+
+## Valid values: 1 - Enable, 0 - Disable. Default: 0x0.
+#custom_feature_high_vsi_fp.BCM88660=0
+
+## Use lower CL. Ardon FC is mapped to CL 0-255.
+dtm_flow_mapping_mode_region_65.BCM88202=1
+dtm_flow_mapping_mode_region_66.BCM88202=1
+
+### Statistic-Report Properties
+stat_if_enable.BCM88202=1
+stat_if_rate.BCM88202=10000
+stat_if_pkt_size.BCM88202=126B
+## Set the Statistic-Report mode
+stat_if_report_mode.BCM88202=QSIZE
+## Enable statistics reports on EnQueue. Valid valued: 0/1. Default: '1'.
+stat_if_report_enqueue_enable.BCM88202=1
+## Enable statistics reports on DeQueue. Valid valued: 0/1. Default: '1'.
+stat_if_report_dequeue_enable.BCM88202=1
+
+## Disable removed features
+phy_1588_dpll_frequency_lock.BCM88202=0
+low_power_nif_mac.BCM88202=0
+low_power_fabric_mac.BCM88202=0
+custom_feature_nif_recovery_enable.BCM88202=0
+phy_null.BCM88202=0
+
+## Disable counter thread
+bcm_stat_interval.BCM88202=0
+#bcm_stat_sync_timeout.BCM88202=0xfffffff
+
+### EMUL changes
+#diag_emulator_partial_init.BCM88202=1
+#schan_timeout_usec.BCM88202=0x7fffffff
+#tdma_timeout_usec.BCM88202=0x7fffffff
+#tslam_timeout_usec.BCM88202=0x7fffffff
+#phy_null.BCM88202=0
+
+### Disable DMA
+#tdma_timeout_usec.BCM88202=0
+#tslam_timeout_usec.BCM88202=0
+#table_dma_enable.BCM88202=0
+#tslam_dma_enable.BCM88202=0
+
+### Dram setup
+# Number of external DRAMs.
+# Allowed values for 88202: 0 / 1 (Dram D) / 2 (Dram's C, D) / 3 (Dram's B, C, D) / 4 (Dram's A, B, C, D) /
+ext_ram_present.BCM88202=0
+
+### Total size of ram
+ext_ram_total_size.BCM88202=2000
+
+### OCB
+bcm886xx_ocb_databuffer_size.BCM88202=1024
+
+# DRAM frequency (DQ/2)
+ext_ram_freq.BCM88202=1200
+
+# Dram Type. Ardon supports only DDR4.
+ext_ram_type.BCM88202=DDR4
+
+### Dram Features
+
+## Dram Gear down mode. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+#ext_ram_gear_down_mode.BCM88202=1
+
+## Alert_n de-assertion period above which error is considered parity error
+#ext_ram_alert_n_period_thrs.BCM88202=0
+
+## Dram Address bus inversion. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+ext_ram_abi.BCM88202=0
+
+## Data bus inversion on write/read direction. Valid values: 0 - Disable, 1 - Enable. Default: 0x0.
+ext_ram_write_dbi.BCM88202=0
+ext_ram_read_dbi.BCM88202=0
+
+## Enable write/read CRC (DDR4 does not support read CRC). Default: 0x0.
+#ext_ram_write_crc=.BCM882021
+#ext_ram_read_crc=.BCM882021
+
+## Command parity latency. Valid values: 0 - Enable, 1 - Disable. Default: 0x0.
+ext_ram_cmd_par_latency.BCM88202=6
+
+## DRAM ClamShell (interface swap its HW PIN pairs during init.)
+# Note: Only one of DRAMs can have its PIN swapped). Valid values: 0/1.
+dram1_clamshell_enable_0.BCM88202=1
+dram1_clamshell_enable_1.BCM88202=1
+dram1_clamshell_enable_2.BCM88202=1
+dram1_clamshell_enable_3.BCM88202=1
+
+## Dram DQ Swap.
+## Format: ext_ram_dq_swap_dramX_byteY_bitZ=M. Means, In dram X, Byte Y swap DQ Z and M. Default: No swapping.
+#ext_ram_dq_swap_dram1_byte2_bit3.BCM88202=4
+#ext_ram_dq_swap_dram4_byte3_bit2.BCM88202=1
+
+### Dram Tuning (Shmoo)
+ddr3_auto_tune.BCM88202=2
+
+### Enable BIST
+# Run Dram BIST on initialization, if BIST fail the initialization will fail. Default: 1.
+bist_enable_dram.BCM88202=1
+
+### Fabric
+## Enable fabric links
+serdes_qrtt_active_0.BCM88202=1
+serdes_qrtt_active_1.BCM88202=1
+serdes_qrtt_active_2.BCM88202=1
+serdes_qrtt_active_3.BCM88202=1
+
+## Firmware Load Method
+load_firmware.BCM88202=2
+
+#SFI speed rate
+port_init_speed_sfi.BCM88202=11500
+
+#LC PLL in. Default: 156.25MHz.
+#xgxs_lcpll_xtal_refclk=125
+
+#########################################
+##cfg for BCM88640_A0 - Petra
+#########################################
+
+force_clk_m_n_divisors_zero_nif0.BCM88640_A0=0
+force_clk_m_n_divisors_zero_fabric0.BCM88640_A0=1
+force_clk_m_n_divisors_zero_comb0.BCM88640_A0=0
+
+combo_ref_clock.BCM88640=312500
+
+nif_ref_clock.BCM88640_A0=312500
+
+# Use variable cell size
+system_cell_format.BCM88640_A0=VCS128
+
+# Core clock speed (MHz)
+core_clock_speed.BCM88640_A0=300
+
+# Map bcm local port to CPU/NIF interfaces
+ucode_port_0.BCM88640_A0=CPU.0
+ucode_port_73.BCM88640_A0=CPU.1
+ucode_port_74.BCM88640_A0=CPU.2
+ucode_port_75.BCM88640_A0=CPU.3
+ucode_port_76.BCM88640_A0=CPU.4
+ucode_port_77.BCM88640_A0=CPU.5
+ucode_port_78.BCM88640_A0=CPU.6
+
+# Interlaken ports basic configuration (temporary).
+# This configuration replaces the above XAUI/RXAUI ports config
+# The following PB design constraint is not enforced in SW, so must be taken
+# care of here, when mapping ports to interfaces:
+#   If using ilkn0, port 1 (if used) must be mapped to ilkn0
+#   If using ilkn1, port 2 (if used) must be mapped to ilkn1
+#   Note that in our default mapping, port 2 is mapped to RXAUI 6, thus won't
+#   work. If one wants to use front panel port 2 with ilkn1, he should be map
+#   RAXUI6 to a port != 2.
+#ilkn_num_lanes_0.BCM88640_A0=12
+#ucode_port_1.BCM88640_A0=ILKN0.0
+#ucode_port_2.BCM88640_A0=ILKN0.1
+#ucode_port_3.BCM88640_A0=ILKN0.2
+#ilkn_num_lanes_1.BCM88640_A0=12
+#ucode_port_4.BCM88640_A0=RXAUI6
+#ucode_port_5.BCM88640_A0=ILKN1.0
+#ucode_port_6.BCM88640_A0=ILKN1.1
+#ucode_port_7.BCM88640_A0=ILKN1.2
+
+# Default header type is derived from fap_device_mode: If fap_device_mode is
+# PP, default header type is ETH. Otherwise, defualt header type is TM.
+# Header type per port can be overriden.
+# All options: ETH/RAW/TM/PROG/CPU/STACKING/TDM/TDM_RAW/INJECTED
+
+# Set CPU to work with TM header (ITMH)
+#tm_port_header_type_0.BCM88640_A0=TM
+tm_port_header_type_in_0.BCM88640_A0=TM
+tm_port_header_type_out_0.BCM88640_A0=CPU
+tm_port_header_type_73.BCM88640_A0=TM
+tm_port_header_type_74.BCM88640_A0=TM
+tm_port_header_type_75.BCM88640_A0=TM
+tm_port_header_type_76.BCM88640_A0=TM
+tm_port_header_type_77.BCM88640_A0=TM
+tm_port_header_type_78.BCM88640_A0=TM
+# recycling port
+tm_port_header_type_40.BCM88640_A0=RAW
+ucode_port_40.BCM88640_A0=RCY.0
+
+# Enable ERP and OLP ports
+num_erp_tm_ports.BCM88640_A0=1
+num_olp_tm_ports.BCM88640_A0=1
+num_recycle_tm_ports.BCM88640_A0=1
+
+# Dram configuration
+# 600 Mhz
+ext_ram_pll_r.BCM88640_A0=4
+ext_ram_pll_f.BCM88640_A0=47
+ext_ram_pll_q.BCM88640_A0=1
+ext_ram_freq.BCM88640_A0=600
+
+# Dbuff size
+# Allowed values: 256/512/1024/2048.
+ext_ram_dbuff_size.BCM88640_A0=1024
+
+# Number of external DRAMs.
+# Allowed values for 88x4x: 0/2/3/4/6.
+# Allowed values for 88650: 0/2/3/4/6/8.
+# ext_ram_total_size below assumed this value is 6 for 88x4x and 8 for
+ext_ram_present.BCM88640_A0=6
+
+# Dram type: Select ONLY ONE of the following DRAM types, to configure all dram
+# related parameteres per type.
+# Dram Type for Pb:
+#dram_type_DDR3_MICRON_MT41J64M16_15E.BCM88640_A0=1
+#dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333.BCM88640_A0=1
+#dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600.BCM88640_A0=1
+#dram_type_GDDR3_SAMSUNG_K4J52324QE.BCM88640_A0=1
+dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G.BCM88640_A0=1
+
+# QDR configuration
+# Parity. Allowed values: PARITY/ECC.
+ext_qdr_protection_type.BCM88640_A0=PARITY
+ext_qdr_size_mbit.BCM88640_A0=72
+#QDR type: QDR/QDR2P/QDR3/NONE.
+ext_qdr_type.BCM88640_A0=QDR
+
+# QDR can use the core clock, or using it's own pll. Current example is for 250MHz pll (if used).
+# QDR using own pll configuration
+#ext_qdr_use_core_clock_freq.BCM88640_A0=0
+#ext_qdr_pll_m.BCM88640_A0=4
+#ext_qdr_pll_n.BCM88640_A0=4
+#ext_qdr_pll_p.BCM88640_A0=0
+
+# QDR using core clock
+ext_qdr_use_core_clock_freq.BCM88640_A0=1
+
+#Configure MDIO. If parameter is not defined, MDIO is disabled.
+mdio_clock_freq_khz.BCM88640_A0=1000
+
+# Streaming interface configuration
+streaming_if_enable_timeoutcnt.BCM88640_A0=1
+streaming_if_timeout_prd.BCM88640_A0=70
+streaming_if_quiet_mode.BCM88640_A0=0
+streaming_if_discard_bad_parity.BCM88640_A0=0
+
+# maximum packet size for WRED tests. 0 - means ignore max packet size.
+discard_mtu_size.BCM88640_A0=0
+
+# multicast egress vlan membership range. By default: 0-4095.
+egress_multicast_direct_bitmap_max.BCM88640_A0=4095
+
+# configure flow mapping base to 0
+flow_mapping_queue_base.BCM88640_A0=0
+
+dtm_flow_mapping_mode_region_25.BCM88640_A0=0
+dtm_flow_mapping_mode_region_26.BCM88640_A0=0
+dtm_flow_mapping_mode_region_27.BCM88640_A0=0
+dtm_flow_mapping_mode_region_28.BCM88640_A0=0
+dtm_flow_mapping_mode_region_29.BCM88640_A0=0
+dtm_flow_mapping_mode_region_30.BCM88640_A0=0
+dtm_flow_mapping_mode_region_31.BCM88640_A0=0
+dtm_flow_mapping_mode_region_32.BCM88640_A0=0
+dtm_flow_mapping_mode_region_33.BCM88640_A0=1
+dtm_flow_mapping_mode_region_34.BCM88640_A0=1
+dtm_flow_mapping_mode_region_35.BCM88640_A0=1
+dtm_flow_mapping_mode_region_36.BCM88640_A0=1
+dtm_flow_mapping_mode_region_37.BCM88640_A0=1
+dtm_flow_mapping_mode_region_38.BCM88640_A0=1
+dtm_flow_mapping_mode_region_39.BCM88640_A0=1
+dtm_flow_mapping_mode_region_40.BCM88640_A0=1
+dtm_flow_mapping_mode_region_41.BCM88640_A0=1
+dtm_flow_mapping_mode_region_42.BCM88640_A0=2
+dtm_flow_mapping_mode_region_43.BCM88640_A0=2
+dtm_flow_mapping_mode_region_44.BCM88640_A0=2
+dtm_flow_mapping_mode_region_45.BCM88640_A0=2
+dtm_flow_mapping_mode_region_46.BCM88640_A0=2
+dtm_flow_mapping_mode_region_47.BCM88640_A0=2
+dtm_flow_mapping_mode_region_48.BCM88640_A0=2
+dtm_flow_mapping_mode_region_49.BCM88640_A0=2
+dtm_flow_mapping_mode_region_50.BCM88640_A0=2
+dtm_flow_mapping_mode_region_51.BCM88640_A0=2
+dtm_flow_mapping_mode_region_52.BCM88640_A0=2
+dtm_flow_mapping_mode_region_53.BCM88640_A0=2
+dtm_flow_mapping_mode_region_54.BCM88640_A0=2
+dtm_flow_mapping_mode_region_55.BCM88640_A0=2
+
+# Power up state (DOWN/UP/UP_AND_RELOCK). Can be configured per lane.
+pb_serdes_lane_power_state.BCM88640_A0=UP_AND_RELOCK
+
+# SeDes media type: Pre-configuration for tx params, according to
+# media type.
+# Allowed values: SHORT_BACKPLANE/LONG_BACKPLANE/CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type.BCM88640_A0=SHORT_BACKPLANE
+pb_serdes_lane_tx_phys_media_type_28.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_29.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_30.BCM88640_A0=CHIP2CHIP
+pb_serdes_lane_tx_phys_media_type_31.BCM88640_A0=CHIP2CHIP
+
+system_is_fe1600_in_system.BCM88640_A0=0
+
+# Counter engine configuration
+counter_engine_source_1.BCM88640_A0=0
+counter_engine_statistics_1.BCM88640_A0=4
+counter_engine_source_2.BCM88640_A0=1
+counter_engine_statistics_2.BCM88640_A0=4
+
+# Statistic Reporting
+stat_if_enable=0
+
+# Clock Phases: 0/90/180/270
+stat_if_phase=0
+
+# Rate in nm
+stat_if_sync_rate=0
+
+# TRUE/FALSE
+stat_if_parity_enable=FALSE
+
+# BILLING/FAP20V
+stat_if_report_mode=BILLING
+
+# Billing Mode
+# EGR_Q_NB/CUD/VSI_VLAN/BOTH_LIFS
+stat_if_report_billing_mode=VSI_VLAN
+
+# Fap20V Mode
+# QUEUE/PACKET
+stat_if_report_fap20v_mode=QUEUE
+
+# QUEUE_NUM/MC_ID (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_fabric_mc=QUEUE_NUM
+stat_if_report_fap20v_ing_mc=QUEUE_NUM
+
+# TRUE/FALSE (only valid in Fap20V PACKET mode)
+stat_if_report_fap20v_cnm_report=FALSE
+
+# TRUE/FALSE
+stat_if_report_fap20v_count_snoop=FALSE
+stat_if_report_original_pkt_size=FALSE
+stat_if_report_fap20v_single_copy_reported=FALSE
+
+schan_timeout_usec.BCM88640_A0=300000
+
+
+polled_irq_mode.BCM88640_A0=0
+polled_irq_delay.BCM88640_A0=1000
+
+# Set the FTMH Load-Balancing Key extension mode
+# Options for 88650: ENABLED
+# Options for 88640 compatible:
+# DISABLED / 8B_LB_KEY_8B_STACKING_ROUTE_HISTORY / 16B_STACKING_ROUTE_HISTORY
+# Default: DISABLED
+system_ftmh_load_balancing_ext_mode.BCM88640=DISABLED
+
+#########################################
+##cfg for BCM88750 (FE1600)
+#########################################
+
+fabric_device_mode.BCM88750=SINGLE_STAGE_FE2
+
+is_dual_mode.BCM88750=0
+system_is_vcs_128_in_system.BCM88750=0
+
+system_is_dual_mode_in_system.BCM88750=0
+system_is_single_mode_in_system.BCM88750=1
+
+system_is_fe600_in_system.BCM88750=0
+
+system_ref_core_clock_khz.BCM88750=1200000
+
+fabric_merge_cells.BCM88750=0
+fabric_multicast_mode.BCM88750=DIRECT
+fabric_load_balancing_mode.BCM88750=NORMAL_LOAD_BALANCE
+fabric_tdm_fragment.BCM88750=0x180
+##Allows single pipe device to send TDM traffic over the fabric primary pipe - available for Fe1600_B0 only
+#change  vcs128_unicast_priority to be lower than 2 - when enabling
+fabric_tdm_over_primary_pipe.BCM88750=0
+fabric_optimize_partial_links.BCM88750=0
+vcs128_unicast_priority.BCM88750=2
+
+polled_irq_mode.BCM88750=0
+polled_irq_delay.BCM88750=1000
+
+#Selects if to run MBIST (Memory Built In Self Test) of internal memory (tables) during startup.
+#Supported values: 0=don't run, 1=run, 2=run with extra logs
+#bist_enable.BCM88650=1
+bist_enable.BCM88750=1
+bist_enable.BCM88470=0
+#High voltage driver strap. If 0, connected to 1.4V supply; if 1, connected to 1V mode.
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88750=0
+load_firmware.BCM88750=2
+
+#0-LFEC 1-8b\10b 2-FEC 3-BEC
+backplane_serdes_encoding.BCM88750=2
+
+#enable\disable CL72
+port_init_cl72.BCM88750=1
+#Avaliable speeds for BCM88750: 5750, 6250, 10312, 11500, 12500
+port_init_speed.BCM88750=10312
+#LC PLL in\out 0=125MHz 1=156.25MHz
+serdes_fabric_clk_freq_in.BCM88750=1
+serdes_fabric_clk_freq_out.BCM88750=1
+serdes_mixed_rate_enable.BCM88750_B0=0
+
+# VSC128 or VSC256
+fabric_cell_format.BCM88750=VSC256
+
+# Core clock speed (MHz)
+core_clock_speed_khz.BCM88750=533333
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling,
+# SCHAN:
+schan_intr_enable.BCM88750=0
+schan_timeout_usec.BCM88750=300000
+# TDMA
+tdma_intr_enable.BCM88750=0
+tdma_timeout_usec.BCM88750=5000000
+# TSLAM
+tslam_intr_enable.BCM88750=0
+tslam_timeout_usec.BCM88750=5000000
+# MIIM
+miim_intr_enable.BCM88750=0
+miim_timeout_usec.BCM88750=300000
+
+#########################################
+##cfg for BCM88950 (FE3200)
+#########################################
+#Device  operation
+fabric_device_mode.BCM88950=SINGLE_STAGE_FE2
+fabric_load_balancing_mode.BCM88950=NORMAL_LOAD_BALANCE
+
+#Cell format
+system_is_vcs_128_in_system.BCM88950=0
+
+#Fabric pipe configuration
+
+fabric_num_pipes.BCM88950=1
+fabric_pipe_map.BCM88950=0
+system_contains_multiple_pipe_device.BCM88950=0
+
+#multicast table mode
+fabric_multicast_mode.BCM88950=DIRECT
+fe_mc_id_range.BCM88950=128K_HALF
+
+#Core clock and system reference clock (KHz)
+system_ref_core_clock_khz.BCM88950=1200000
+core_clock_speed_khz.BCM88950=720000
+
+#LC PLL in\out 0=125MHz 1=156.25MHz
+serdes_fabric_clk_freq_in.BCM88950=0
+serdes_fabric_clk_freq_out.BCM88950=1
+
+#TODO
+polled_irq_mode.BCM88950=1
+polled_irq_delay.BCM88950=1000
+
+#Memory Bist
+bist_enable.BCM88950=0
+
+#High voltage driver strap. If 0, connected to 1.25V supply; 
+#if 1, connected to 1V mode (For unused Falcon Quads that are connected to 1.0V).
+#for specific quad use srd_tx_drv_hv_disable_quad_X where X is (FSRD num * 4 + internal quad)
+srd_tx_drv_hv_disable.BCM88950=0
+load_firmware.BCM88950=0x102
+
+
+##Per port properties
+#Possible values - KR_FEC, 64_66, RS_FEC, LL_RS_FEC
+backplane_serdes_encoding.BCM88950=RS_FEC
+
+#enable\disable CL72
+port_init_cl72.BCM88950=1
+
+#link speed
+port_init_speed.BCM88950=25000
+
+#Link connected to a reapter
+#Values: 0/1. Default: 0
+#repeater_link_enable_<port>.BCM88950=0
+
+##Fabric cell FIFO DMA
+fabric_cell_fifo_dma_enable.BCM88950=1
+
+## CMIC interrupts:
+# Enable: Use interrupts completion instead of polling completion for the following operations.
+#         Options: 1 - Enable, 0 - Disable. Default: 0.
+# Timeout: delay in Microsecond between the polling,
+# SCHAN:
+schan_intr_enable.BCM88950=0
+schan_timeout_usec.BCM88950=300000
+# TDMA
+tdma_intr_enable.BCM88950=0
+tdma_timeout_usec.BCM88950=5000000
+# TSLAM
+tslam_intr_enable.BCM88950=0
+tslam_timeout_usec.BCM88950=5000000
+# MIIM
+miim_intr_enable.BCM88950=0
+miim_timeout_usec.BCM88950=300000
+
+##############################
+# Configuration for devices run in emulation
+##############################
+#diag_emulator_partial_init.BCM88470=2
+#phy_simul.BCM88470=1
+#system_ref_core_clock_khz.BCM88470=250000
+#system_ref_core_clock_khz.BCM88470=600000
+#phy_simul.BCM88270=1
+
+polled_irq_mode.BCM88470=1
+polled_irq_mode.BCM88270=1
+
+schan_intr_enable.BCM88470=0
+schan_intr_enable.BCM88270=0
+
+# For emulation use:
+#schan_timeout_usec.BCM88470=600000000
+schan_timeout_usec.BCM88470=300000
+schan_timeout_usec.BCM88270=200000
+
+# TDMA
+tdma_intr_enable.BCM88470=0
+#tdma_intr_enable.BCM88270=0
+
+# For emulation use:
+#tdma_timeout_usec.BCM88470=600000000
+tdma_timeout_usec.BCM88470=60000000
+tdma_timeout_usec.BCM88270=500000
+
+# TSLAM
+tslam_intr_enable.BCM88470=0
+tslam_intr_enable.BCM88270=0
+
+# For emulation use:
+#tslam_timeout_usec.BCM88470=600000000
+tslam_timeout_usec.BCM88470=60000000
+tslam_timeout_usec.BCM88270=500000
+
+#otm_base_q_pair.BCM88470=2
+
+##############################
+# Config variable below are only accessed from dune.soc, and are used to
+# configure BSP / example application / group of formal config variables.
+##############################
+
+# Support (and configure on init) packet processing features.
+# If not defined - only traffic management capabilities are enabled.
+packet_processing=1
+
+## PCP (Petra Co-Processor) features
+#pcp_elk.BCM88640_A0=1
+#pcp_oam.BCM88640_A0=1
+#pcp_dma.BCM88640_A0=1
+
+## Set/Override TDM related config variables
+#tdm.BCM88640_A0=1
+
+# If set, always configures synthesizers, even if the configured rate is
+# equal to
+# their nominal rate. Can be disabled to speedup bringup time
+# (keep in mind that if disabled, changing a synt to a non-nominal freq and
+# than back to nominal will not work
+#synt_over.BCM88640_A0=1
+
+# Local variables for board synthesizers freq. Fabric, combo and nif also configure
+# the *_ref_clock soc properties for these frequencies. core, ddr and phy only
+# configures the synthesizer
+synt_core.BCM88640_A0=100000000
+synt_ddr.BCM88640_A0=125000000
+synt_phy.BCM88640_A0=156250000
+
+
+############################
+### Warmboot & SW State ####
+############################
+#
+#HW journal working mode. Allowed values: 0-2.
+#   0 : Disabled
+#   1 : Commit After Each Api
+#   2 : Commit Upon User Request
+ha_hw_journal_mode=0
+
+ha_hw_journal_size=15728640
+ha_sw_journal_size=15728640
+ha_crash_recovery=1
+
+
+# stable_size - a strict bound on the application's external storage size
+stable_size.BCM88950=200000
+stable_size.BCM88750=200000
+stable_size.BCM88650=281000000
+stable_size.BCM88675=500000000
+stable_size.BCM88680=500000000
+stable_size.BCM88690=500000000
+stable_size.BCM88470=350000000
+stable_size.BCM88270=650000000
+stable_size=420000000
+
+# determine the memory size pre-allocated for the SDK's SW State
+sw_state_max_size.BCM88650=210000000
+sw_state_max_size.BCM88675=350000000
+sw_state_max_size.BCM88680=350000000
+sw_state_max_size.BCM88470=300000000
+sw_state_max_size.BCM88270=210000000
+sw_state_max_size=350000000
+
+# stable location
+## part of scache initialization for warmboot persistent storage.
+## values: 1-2:Not Valid for dnx 3: Store in a file  4: Use Shared Mem.
+# 4 is the preffered option, using 3 for Arad and FE in order to regress both modes.
+stable_location.BCM88950=3
+stable_location.BCM88750=3
+stable_location.BCM88650=3
+stable_location.BCM88660=3
+stable_location.BCM88675=3
+stable_location=3
+
+# stable_filename - the warmboot file name (if stored on a file) 
+stable_filename=/tmp/warmboot_data
+
+# emulation file name
+stable_filename.BCM88470=/tmp/warmboot_data
+
+
+# create the file in memory for a faster warmboot debug
+#stable_filename=/dev/shm/warmboot_data
+
+# stable_flags - not in use
+stable_flags=0
+
+############################
+############################
+
+
+# Bridge default logical interfaces allocation IDS
+logical_port_l2_bridge.BCM88640=1
+logical_port_drop.BCM88640=-1
+
+#logical_port_mim_in.BCM88640=2
+#logical_port_mim_out.BCM88640=3
+
+## IPV6 tunnel
+bcm886xx_ipv6_tunnel_enable=1
+
+## Inlif Profile Management Mode - QoS L3 L2 marking mode
+#
+# BCM88660 ONLY
+#
+# QoS L3 L2 marking allows changing the DSCP and/or EXP values
+# of IP and/or MPLS packets according to the incoming port
+# (or inlif), and the Traffic Class/Drop Precedence.
+#
+# The inlif profile is used to control the DSCP/EXP marking.
+# This SOC property controls which mode is used for the inlif profile:
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the DSCP/EXP marking).
+# 0: Advanced mode (the user controls which inlif profile values perform DSCP/EXP marking directly).
+#bcm886xx_qos_l3_l2_marking=1
+
+## Unicast RPF mode per RIF
+#
+# This SOC property allows the user to set the unicast RPF mode - loose, strict or disabled - per RIF.
+# If disabled, the unicast RPF mode of a RIF is set globally.
+# Options: 0 / 1
+
+##Jericho only, number of inrif mac termination combinations. Legal values 0 - 16, default value 16 */
+#Note: Two sets of identical mac termination combinations with different RPF modes (loose and strict) 
+#will consume two termination combinations resources.
+#Two sets of identical mac termination combinations with and without loose RPF will consume only one resource.
+number_of_inrif_mac_termination_combinations=8
+
+##Jericho only, ipmc_l3mcastl2_mode SOC allows a per RIF program selection in the case of ipv4 MC with IPMC disable 
+#instead of the global bcmSwitchL3McastL2 switch control selection.
+#Legal values:
+#0: bcmSwitchL3McastL2 switch control.
+#1: PER In-RIF selection.
+#Note that enabling this SOC will reduce the number of In-RIF mac termination combinations bits by one to a maximum of 3 bits 
+#so it can't be enabled with number_of_inrif_mac_termination_combinations larger than 8.
+ipmc_l3mcastl2_mode = 1
+
+# The bcm_ipmc_add adds bridge or route entries according to the BCM_IPMC_L2 flag.
+# Setting custom_feature_ipmc_set_entry_type_by_rif=1 will use the related IN-RIF IPMC state (enable/disable) 
+# to select the bcm_ipmc_add entry type (bridge/route).
+#custom_feature_ipmc_set_entry_type_by_rif=0
+
+# bcm886xx_l3_ingress_urpf_enable=1
+
+## BOS handling mode
+# BCM8866X ONLY
+#
+# There are two ways to handle BOS, controlled by bcm886xx_mpls_termination_mode:
+# 0 - Use BOS as key in lookup.
+# 1 - Don't use it (except for reserved labels).
+#
+#bcm886xx_mpls_termination_key_mode=0
+
+# Color resolution mode allows the user to have more detailed metering color information.
+# BCM88660 ONLY
+#
+# Options: 0-2
+# 0: A red result from both Ethernet policer and meter implies DP=3.
+# 1: A red result from meter implies that DP=2, while a red result from rate (Ethernet policer) implies DP=3.
+#policer_color_resolution_mode=1
+
+## Inlif Profile Management Mode - Disable Same Interface Filter
+# BCM8866X ONLY
+#
+# Controls which mode is used for the inlif profile management.
+# 1: Basic mode (1 bit of the inlif profile is reserved and is used for the same-interface filter).
+# 0: Advanced mode (the user controls which inlif profile values have the same-interface filter disabled for them).
+#bcm886xx_logical_interface_bridge_filter_enable=1
+
+## Default Block Forwarding Strength
+#
+# Configure the default forwarding strength of blocks.
+#
+# SOC Properties:
+#block_trap_strength_vtt - VTT block forwarding strength
+#block_trap_strength_flp - FLP block forwarding strength
+#block_trap_strength_hash - SLB block forwarding strength (BCM8866X ONLY)
+#block_trap_strength_pmf_0 - PMF 1st lookup forwarding strength
+#block_trap_strength_pmf_1 - PMF 2nd lookup forwarding strength
+#
+# Options: 0-7
+
+## Stateful Load Balancing
+# BCM8866X ONLY
+#
+# Stateful Load Balancing (SLB) allows the load balancing of ECMP and LAG
+# groups to become stateful.
+# In standard load balancing, removing a member from the ECMP/LAG
+# group may affect the selected member, since the formula
+# depends on group size.
+# In stateful load balancing the member is selected once and saved.
+# Later, the member is always retrieved, and does not depend on
+# the size of the LAG/ECMP group.
+#
+# resilient_hash_enable - Enable/disable SLB. Values:
+# 1 - Enable SLB.
+# 0 - Disable SLB.
+#resilient_hash_enable=1
+
+# When this flag is set (and speculative parsing is used) it is possible for a packet of L4oIPv4/6oMPLS(1-3 labels)oETH
+# with MPLS forwarding to use the L4 header, otherwise the IPv4/6 is the last known header.
+#Note: setting this flag can cause unexpected behavior when BOS is used in the scenario above.
+#custom_feature_speculative_L4_support=0
+
+#Make Arad SOC properties work for Arad+, by mapping the BCM88660 suffix to BCM88650
+soc_family.BCM88660=BCM88650
+#Make Arad SOC properties work for Jericho, by mapping the BCM88675 suffix to BCM88650
+soc_family.BCM88675=BCM88650
+#Make Arad SOC properties work for QMX, by mapping the BCM88375 suffix to BCM88650
+soc_family.BCM88375=BCM88650
+#Make Arad SOC properties work for Ardon, by mapping the BCM88202 suffix to BCM88650
+soc_family.BCM88202=BCM88650
+#Make FE3200 SOC properties work for FE3200 SKU 8952, by mapping the BCM88952 suffix to BCM88950
+soc_family.BCM88952=BCM88950
+#Make FE1600 SOC properties work for FE1600 SKU 8753, by mapping the BCM88753 suffix to BCM88750
+soc_family.BCM88753=BCM88750
+#Make FE1600 SOC properties work for FE1600 SKU 8752, by mapping the BCM88752 suffix to BCM88750
+soc_family.BCM88752=BCM88750
+#Make Arad SOC properties work for QAX, by mapping the BCM88470 suffix to BCM88650
+soc_family.BCM88470=BCM88650
+
+#Make Arad SOC properties work for QUX, by mapping the BCM88270 suffix to BCM88650
+soc_family.BCM88270=BCM88650
+#Make Arad SOC properties work for FLAIR, by mapping the BCM8206 suffix to BCM88650
+soc_family.BCM8206=BCM88650
+#Make Arad SOC properties work for JERICHO_PLUS, by mapping the BCM88470 suffix to BCM88650
+soc_family.BCM88680=BCM88650
+
+# Use different mymac addresses for ipv4 and ipv6 when using vrrp for mymac termination.
+#l3_vrrp_ipv6_distinct=1
+
+# Enable multiple mymac termination mode.
+# In order to enable it, also set l3_vrrp_ipv6_distinct=0 and l3_vrrp_max_vid=0 since vrrp and
+# multiple mymac mode can't co exist.
+#l3_multiple_mymac_termination_enable=1
+
+# Distinguish between ipv4 and all other l3 protocols when multiple mymac terminating
+#l3_multiple_mymac_termination_mode=1
+
+# Usually the final DP given by the meter (or the In-DP) is unchanged, and can be from 0-3.
+# When this SOC property is set to 1, when the final INGRESS DP is 2,
+# it is mapped to 1 instead, and thus only the values 0-1 and 3 can be output.
+# This has no effect when policer_color_resolution_mode=1.
+#custom_feature_always_map_result_dp_2_to_1=1
+
+# Dynamic port feature
+#custom_feature_dynamic_port=1
+
+# low power nif mac
+#low_power_nif_mac=0
+
+# allow modifications during traffic
+#custom_feature_allow_modifications_during_traffic=1
+
+# mem_cache_enable property
+# Cache memory mode - enable memory caching during init.
+# Note: The user MUST add the property name with suffix '_specific' before providing the list of the cached memories.
+# Possible options (suffixes):
+# _all        - enable all tables (excluding read-only/write-only/dynamic/signal)
+# _predefined - enable predefined list of tables
+# _parity     - enable tables protected by parity field
+# _ecc        - enable tables protected by ecc field
+# _specific   - enable specific tables - MUST add this suffix if specific tables should be cached
+# _specific_X - enable caching for memory X, where X is memory name. Note: will not work without the previous suffix
+# Example: (this example will enable caching of the IHP_RECYCLE_COMMAND table)
+# mem_cache_enable_specific.BCM88650=1 #(MUST be added in case specific tables should be cached)
+# mem_cache_enable_specific_IHP_RECYCLE_COMMAND.BCM88650=1
+# mem_cache_enable_specific.BCM88675=1
+# mem_cache_enable_specific_IPS_QUEUE_PRIORITY_TABLE.BCM88675=1
+
+mem_cache_enable_parity.BCM88650=1
+mem_cache_enable_parity.BCM88675=1
+mem_cache_enable_parity.BCM88202=1
+mem_cache_enable_parity.BCM88750=1
+mem_cache_enable_parity.BCM88950=1
+mem_cache_enable_ecc=0
+
+# mem_nocache property
+# Cache memory mode - disable memory caching for specific table during init.
+# Note: the user MUST add the default property name before providing the list of the uncached memories.
+# Possible options (suffixes):
+# specific_X - disable caching for memory X, where X is memory name. Note: will not work without the previous suffix
+# Example: (this example will enable caching of the IHP_TERMINATION_PROFILE_TABLE table)
+# mem_nocache.BCM88660=1 #(MUST be added in case there are uncached memories)
+# mem_nocache_IHP_TERMINATION_PROFILE_TABLE.BCM88660=1
+#mem_nocache.BCM88680=1
+#mem_nocache_PPDB_B_LIF_TABLE_LABEL_PROTOCOL_OR_LSP.BCM88680=1
+#mem_nocache_PPDB_B_LIF_TABLE.BCM88680=1
+
+
+custom_feature_no_backdoor=1
+
+# Jericho split horizon mode
+# 0 - Use 0-1 range for lif orientation.
+# 1 (default) - Use 0-1 range for lif orientation in AC lifs and 0-3 range for orientation in other lif types.
+split_horizon_forwarding_groups_mode.BCM88675=1
+split_horizon_forwarding_groups_mode.BCM88470=1
+split_horizon_forwarding_groups_mode.BCM88680=1
+
+
+# Entries capacities for public and private IP forwarding tables
+private_ip_frwrd_table_size=500000
+public_ip_frwrd_table_size=500000
+
+
+#Enable KAPS ARM and Descriptor-DMA
+dma_desc_aggregator_chain_length_max=500
+dma_desc_aggregator_buff_size_kb=100
+dma_desc_aggregator_timeout_usec=1000
+dma_desc_aggregator_enable_specific_KAPS=1
+
+#In Jericho the KAPS ARM DMA already consumes 64KB of buffer memory
+dma_desc_aggregator_buff_size_kb.BCM88675=40
+
+# Entries capacities for direct access tables in KAPS (8K granularity)
+#pmf_kaps_large_db_size=8096
+
+#enable expose of HW id instead of SW id in Traps.
+bcm886xx_rx_use_hw_trap_id.BCM88650=1
+bcm886xx_rx_use_hw_trap_id.BCM88675=1
+
+# Jericho - maximum RIF Id ( valid range is 0 to 32*1024-1)
+#rif_id_max=20000
+
+#If set, never add the PPH learn extension (unless explictly required in FP action).
+#bcm886xx_pph_learn_extension_disable.BCM88650=0
+#bcm886xx_pph_learn_extension_disable.BCM88660=0
+#bcm886xx_pph_learn_extension_disable.BCM88675=0
+
+# Jericho - field_ip_first_fragment_parsed
+#field_ip_first_fragment_parsed=0
+
+# learning_fifo_dma_buffer_size in bytes (host memory size). Valid range is 20-327680
+learning_fifo_dma_buffer_size=200000
+# learning_fifo_dma_timeout in microseconds. Valid range is 0-65535. 0 means no timeout.
+learning_fifo_dma_timeout=32767
+# learning_fifo_dma_threshold valid range is 1-16384 (0x4000)
+learning_fifo_dma_threshold=4
+
+###################################
+########### OAM and BFD ###########
+###################################
+
+# OAM / BFD initialization
+# To enable OAM set oam_enable to 1
+# To enable BFD set bfd_enable to 1
+# Be aware that OAM requires more settings (Configuring OAMP and Recycle port)
+
+# oam_enable=1
+# bfd_enable=1
+
+# Set OAMP port
+num_oamp_ports.BCM88650=0
+
+# If BFD is used, runtime_performance_optimize_enable_sched_allocation should be set to 0
+# to prevent high memory consumption
+
+# Disable the following:
+# bcm886xx_next_hop_mac_extension_enable
+# bcm886xx_ipv6_tunnel_enable
+
+# To use IEEE 1588, configure DPLL clock
+
+# Configure recycle port (assuming ucode_port_40=RCY.0)
+
+#oam_rcy_port.BCM88650=40
+#tm_port_header_type_in_40.BCM88650=TM
+#tm_port_header_type_out_40.BCM88650=ETH
+#ucode_port_40.0=RCY.0:core_0.40
+
+# MPLS-TP channel types for OAM/BFD - If MPLS-TP used, channel should be specified
+# Available types: mplstp_bfd_control_channel_type
+#               mplstp_pw_ach_channel_type
+#               mplstp_dlm_channel_type
+#               mplstp_ilm_channel_type
+#               mplstp_dm_channel_type
+#               mplstp_ipv4_channel_type
+#               mplstp_cc_channel_type
+#               mplstp_cv_channel_type
+#               mplstp_on_demand_cv_channel_type
+#               mplstp_pwe_oam_channel_type
+#               mplstp_ipv6_channel_type
+#               mplstp_fault_oam_channel_type
+#               mplstp_g8113_channel_type
+#mplstp_g8113_channel_type=0x8902
+#mplstp_fault_oam_channel_type=0x5678
+
+# Use BFD MPLS TP
+#bfd_encapsulation_mode=1
+
+# Use 1711 protocol
+#custom_feature_y1711_enabled=1
+
+# OAM DMA threshold
+#oamp_fifo_dma_event_interface_enable=1
+#oamp_fifo_dma_event_interface_timeout=0
+#oamp_fifo_dma_event_interface_buffer_size=0x1000
+#oamp_fifo_dma_event_interface_threshold=10
+
+# PORT BASED PWE TERMINATION
+#pwe_termination_port_mode_enable =1
+
+# Walk around for Inlif data Errata, for GAL packets, lookup mpls table with valid mpls label
+# it's not offical solution, just for some dedicated customer.
+# offical solution will be PMF. please refer the relevant doc.
+#custom_feature_gal_lookup_exactly=1
+
+custom_feature_cmodel_loopback=1
+
+#for IPv6UC: use Tcam instead of KAPS
+#custom_feature_l3_ipv6_uc_use_tcam=0
+# ipv6_mc need KPB library
+custom_feature_ipv6_mc_forwarding_disable = 1
+vlan_match_criteria_mode=PON_PCP_ETHERTYPE
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/dnx.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/dnx.soc
new file mode 100644
index 0000000..eb90675
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/dnx.soc
@@ -0,0 +1,192 @@
+#
+# $Id: jer.soc,v 1.90 2013/08/14 08:32:00 ninash Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+#
+
+debug info
+debug appl rcload warn
+debug appl symtab warn
+debug bcm rx,tx,link,attach warn
+debug soc tests warn
+debug soc rx,phy,schan,reg,socmem,dma,mem,miim,mii,intr,counter,ddr warn
+debug soc common err
+debug sys verinet warn
+debug soc physim warn
+
+if $?QMX_A0 || $?BCM88370_A0 || $?BCM88371_A0 || $?BCM88371M_A0 || $?BCM88375_A0 || $?BCM88376_A0 || $?BCM88376M_A0 || $?BCM88377_A0 || $?BCM88378_A0 || $?BCM88379_A0 || \
+   $?QMX_A1 || $?BCM88370_A1 || $?BCM88371_A1 || $?BCM88371M_A1 || $?BCM88375_A1 || $?BCM88376_A1 || $?BCM88376M_A1 || $?BCM88377_A1 || $?BCM88378_A1 || $?BCM88379_A1 ||\
+   $?QMX_B0 || $?BCM88370_B0 || $?BCM88371_B0 || $?BCM88371M_B0 || $?BCM88375_B0 || $?BCM88376_B0 || $?BCM88376M_B0 || $?BCM88377_B0 || $?BCM88378_B0 || $?BCM88379_B0  \
+   'local QMX 1'
+if $?JERICHO_A0 || $?BCM88670_A0 || $?BCM88671_A0 || $?BCM88671M_A0 || $?BCM88672_A0 || $?BCM88673_A0 || $?BCM88674_A0 || $?BCM88675_A0 || $?BCM88675M_A0 || $?BCM88676_A0 || $?BCM88676M_A0 || $?BCM88678_A0 || $?BCM88679_A0 || \
+   $?JERICHO_A1 || $?BCM88670_A1 || $?BCM88671_A1 || $?BCM88671M_A1 || $?BCM88672_A1 || $?BCM88673_A1 || $?BCM88674_A1 || $?BCM88675_A1 || $?BCM88675M_A1 || $?BCM88676_A1 || $?BCM88676M_A1 || $?BCM88678_A1 || $?BCM88679_A1 || \
+   $?JERICHO_B0 || $?BCM88670_B0 || $?BCM88671_B0 || $?BCM88671M_B0 || $?BCM88672_B0 || $?BCM88673_B0 || $?BCM88674_B0 || $?BCM88675_B0 || $?BCM88675M_B0 || $?BCM88676_B0 || $?BCM88676M_B0 || $?BCM88678_B0 || $?BCM88679_B0 \
+   'local JERICHO 1'
+if $?BCM88680_A0 ||  $?BCM88681_A0 ||  $?BCM88682_A0 || $?BCM88683_A0 ||  $?BCM88380_A0 ||  $?BCM88381_A0 \
+   'local JERPLUS 1'
+
+if $?BCM88690_A0 \
+   'local JERTWO 1'
+
+if $?QMX \
+    'rcload bcm88375_board.soc'
+if $?JERICHO \
+    'rcload bcm88675_board.soc'
+
+if $?JERPLUS \
+    'rcload bcm88680_board.soc'
+
+#
+# For Jericho-2:
+# This will have to change when we have bcm88690_board.soc
+#
+if $?JERTWO \
+    'rcload bcm88680_board.soc'
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+set RCError=off
+debug appl shell warn
+if $?QMX \
+    'rcload /home/negev/bcm88375_dram_tune.soc'
+
+if $?JERICHO \
+    'rcload /home/negev/bcm88675_dram_tune.soc'
+
+debug appl shell =
+set RCError=on
+
+set RCError=off
+rcload combo28_dram.soc
+set RCError=on
+
+#Set fabric connect mode as FE for multi FAP system
+if $?diag_chassis " \
+   config add fabric_connect_mode.BCM88675=FE"
+
+# Set modid:
+# If diag_chassis is enabled (two line cards), and 'slot' is defined (slot is defined only when
+# working without a management card - set modid to be 'slot'
+# Otherwise (single line card, or management card), set modid to be 0 for unit 0, and 1 for unit != 0
+if $?diag_chassis && $?slot "\
+  local modid $slot" \
+else "\
+  local modid $unit"
+expr $modid==1; if $? "local modid 2"
+
+if $?module_id " \
+  local modid $module_id"
+
+echo "$unit: modid=$modid"
+
+# Set base_modid:
+# Id base_module_id is set, then set base_modid to have base_module_id value.
+# Otherwise, set base_modid to be 0.
+if $?base_module_id " \
+  local base_modid $base_module_id" \
+else " \
+  local base_modid 0"
+
+expr $base_modid > 0
+if $? " \
+  echo '$unit: base_modid=$base_modid'"
+
+if $?diag_chassis " \
+  local nof_devices 2" \
+else "\
+  local nof_devices 1"
+
+if $?n_devices " \
+  local nof_devices $n_devices"
+
+expr $nof_devices > 1
+if $? " \
+  echo '$unit: nof_devices=$nof_devices'"
+
+if $?mng_cpu " \
+  echo '$unit:management card - polling is set on'; \
+  config add polled_irq_mode.BCM88675=1; \
+  config add schan_intr_enable.BCM88675=0; \
+  config add tdma_intr_enable.BCM88675=0; \
+  config add tslam_intr_enable.BCM88675=0; \
+  config add miim_intr_enable.BCM88675=0; "
+
+#Counters unavailable in cmodel
+if $?cmodel " \
+  config add counter_engine_sampling_interval=0;"
+
+#default values in a case which these parameters are not exist
+if !$?diag_cosq_disable "\
+  local diag_cosq_disable 0"
+if !$?warmboot "\
+  local warmboot 0"
+if !$?diag_disable "\
+  local diag_disable 0"
+if !$?diag_no_itmh_prog_mode "\
+  local diag_no_itmh_prog_mode 0"
+if !$?l2_mode "\
+  local l2_mode 0"
+
+if $?JERPLUS "\
+  local diag_disable 0"
+local init_others NoLinkscan=0
+if $?JERPLUS "\
+  local init_others 'NoIntr=1 NoLinkscan=1 NoApplStk=0'"
+
+#Disable interrupts in cmodel
+if $?cmodel "\
+  local no_intr 1" \
+else "\
+  local no_intr 0"
+
+#
+# For Jericho-2, we TEMPORARILY disable some components to quickly enable
+# a working PCID version.
+# 
+if $?JERTWO "\
+  local no_soc 0"
+
+if $?JERTWO "\
+  local no_intr 1"
+
+
+#INIT_DNX ModID=$modid NofDevices=$nof_devices CosqDisable=$diag_cosq_disable NoAppl=$diag_disable Warmboot=$warmboot NoRxLos=1 $init_others NoItmhProgMode=$diag_no_itmh_prog_mode L2Mode=$l2_mode NoIntr=$no_intr NoSoc=$no_soc
+
+INIT_DNX
+
+#LED support section start
+#Program of LED0
+local ledcode_0 '02 05 67 2D 02 01 67 2D 02 11 67 2D 02 09 67 2D\
+ 02 15 67 2D 02 0D 67 2D 86 E0 3A 06 28 32 00 32\
+ 01 B7 97 75 3E 16 E0 CA 06 70 3E 77 3A 67 33 75\
+ 3A 77 1C 12 A0 F8 15 1A 00 57 32 0E 87 57 32 0F\
+ 87 57' #sdk88670.hex
+
+#Program of LED1
+local ledcode_1 '02 1D 67 2D 02 2D 67 2D 02 05 67 2D 02 0D 67 2D\
+ 02 09 67 2D 02 01 67 2D 86 E0 3A 06 28 32 00 32\
+ 01 B7 97 75 3E 16 E0 CA 06 70 3E 77 3A 67 33 75\
+ 3A 77 1C 12 A0 F8 15 1A 00 57 32 0E 87 57 32 0F\
+ 87 57' #sdk88670.hex
+
+
+#Program of LED2
+local ledcode_2 '02 01 67 2D 02 09 67 2D 02 0D 67 2D 02 05 67 2D\
+ 02 2D 67 2D 02 1D 67 2D 86 E0 3A 06 28 32 00 32\
+ 01 B7 97 75 3E 16 E0 CA 06 70 3E 77 3A 67 33 75\
+ 3A 77 1C 12 A0 F8 15 1A 00 57 32 0E 87 57 32 0F\
+ 87 57' #sdk88670.hex
+
+# Download LED code into LED processors and enable (if applicable).
+if $?feature_led_proc && !$?simulator \
+    "led 0 prog $ledcode_0; \
+     led 1 prog $ledcode_1; \
+     led 2 prog $ledcode_2; \
+     led auto on; \
+     led 0 start; \
+     led 1 start; \
+     led 2 start"
+
+
+echo "dnx.soc: Done............................."
+
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/dune.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/dune.soc
new file mode 100644
index 0000000..57f24ea
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/dune.soc
@@ -0,0 +1,1080 @@
+#
+# $Id: dune.soc,v 1.5 2011/12/20 10:53:28 yaronm Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+#
+# Configure fap device mode (TM/PP/TDM_OPTIMIZED/TDM_STANDARD)
+# and ftmh outlif extension depending on config variables 'packet_processing' and 'tdm' variables
+if $?tdm "\
+  echo '*** TDM MODE ***'; \
+  config add diag_cosq_disable=1; \
+  if !$?fap_device_mode 'config add fap_device_mode=TDM_STANDARD'; \
+  config add fabric_ftmh_outlif_extension=ALWAYS; \
+  config ext_qdr_type=NONE; \
+  config ext_ram_present=0"
+if !$?tdm && $?packet_processing "\
+  echo '*** PACKET PROCESSING MODE ***'; \
+  config add fabric_ftmh_outlif_extension=ALWAYS; \
+  config add fap_device_mode=PP; \
+  config add egress_encap_ip_tunnel_range_min=4095; \
+  config add egress_encap_ip_tunnel_range_max=4095; \
+  config add mpls_tunnel_term_label_range_min_0=1000; \
+  config add mpls_tunnel_term_label_range_max_0=1001; \
+  config add mpls_tunnel_term_label_range_min_1=1002; \
+  config add mpls_tunnel_term_label_range_max_1=1003; \
+  config add mpls_tunnel_term_label_range_min_2=1004; \
+  config add mpls_tunnel_term_label_range_max_2=1005; \
+  if !$?diag_cosq_disable 'config add diag_cosq_disable=0';"
+if !$?tdm && !$?packet_processing "\
+  echo '*** TM ONLY MODE ***'; \
+  config add fap_device_mode=TM; \
+  config add fabric_ftmh_outlif_extension=IF_MC; \
+  if !$?diag_cosq_disable 'config add diag_cosq_disable=0'"
+
+# When more than a single device, set connect mode to FE and modid
+# to the slot id. For a single device, set connect mode to SINGLE_FAP
+# and modid to 0. Note that when using single_fap, all fabric-facing serdes
+# lanes are set in loopback, for fabric multicast to work.
+# All options for fabric_connect_mode are FE/BACK2BACK/MESH/MULTI_STAGE_FE/SINGLE_FAP
+
+if !$?diag_cosq_disable "config add diag_cosq_disable=0"
+if !$?slot || !$?diag_chassis "local slot 0"
+if !$?board_type_GFA_BI "local board_type_GFA_BI 1"
+if !$?board_type_GFA_BI_2 "local board_type_GFA_BI_2 0"
+
+if $?diag_chassis " \
+  local nof_devices 2; \
+  config add fabric_connect_mode=FE" \
+else "\
+  local nof_devices 1; \
+  if !$?fabric_connect_mode 'config add fabric_connect_mode=SINGLE_FAP'"
+   
+#Enable all quartets. Can be done per quartet using _N suffix
+config add pb_serdes_qrtt_active=1
+
+local lane_rate_nif 6250000
+local lane_rate_com_a 6250000
+if $board_type_GFA_BI "\
+    local lane_rate_fbr 5000000; \
+    local lane_rate_com_b 3125000; \
+    config add fabric_ref_clock=250000; \
+    config add combo_nif_0=1; \
+    config add combo_nif_1=1" \
+else '\
+    local lane_rate_fbr 6250000; \
+    local lane_rate_com_b 6250000; \
+    config add fabric_ref_clock=312500; \
+    config add combo_nif_0=0; \
+    config add combo_nif_1=0; \
+    for i=32,59 \'config add pb_serdes_lane_tx_phys_media_type_$i=CHIP2CHIP\''
+
+# Nif serdes quartets
+for i=0,2 'config add pb_serdes_qrtt_max_expected_rate_$i=$lane_rate_nif'
+for i=4,6 'config add pb_serdes_qrtt_max_expected_rate_$i=$lane_rate_nif'
+
+# Nif serdes quartet (combo-a)
+config add pb_serdes_qrtt_max_expected_rate_3=$lane_rate_com_a
+
+# Nif serdes quartet (combo-b)
+config add pb_serdes_qrtt_max_expected_rate_7=$lane_rate_com_b
+
+# Fabric serdes quartets
+for i=8,14 'config add pb_serdes_qrtt_max_expected_rate_$i=$lane_rate_fbr'
+
+# set default rate to nif rate. Override fabric lanes.
+config add pb_serdes_lane_rate=$lane_rate_nif
+for i=12,15 'config add pb_serdes_lane_rate_$i=$lane_rate_com_a'
+for i=28,31 'config add pb_serdes_lane_rate_$i=$lane_rate_com_b'
+for i=32,59 'config add pb_serdes_lane_rate_$i=$lane_rate_fbr'
+
+# Board Type configuration.
+
+if $board_type_GFA_BI "\
+    echo Configure GFA_BI Port/Interfcae/Nif/SerDes parameters; \
+    config add ucode_port_1=RXAUI7; \
+    config add ucode_port_2=RXAUI6; \
+    config add ucode_port_3=XAUI7; \
+    config add ucode_port_4=RXAUI0; \
+    config add ucode_port_5=RXAUI2; \
+    config add ucode_port_6=RXAUI4; \
+    config add ucode_port_7=RXAUI12; \
+    config add ucode_port_8=RXAUI10; \
+    config add ucode_port_9=RXAUI8; \
+    config add pb_serdes_lane_swap_polarity_tx_9=1; \
+    config add pb_serdes_lane_swap_polarity_tx_29=1; \
+    config add pb_serdes_lane_swap_polarity_rx_13=1; \
+    config add pb_serdes_lane_swap_polarity_rx_18=1; \
+    config add pb_serdes_lane_swap_polarity_rx_22=1; \
+    config add pb_serdes_lane_swap_polarity_rx_30=1; \
+    config add pb_serdes_lane_swap_polarity_rx_31=1; \
+    config add pb_serdes_lane_rx_phys_zcnt=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt=1; \
+    config add pb_serdes_lane_rx_phys_dfelth=20; \
+    config add pb_serdes_lane_rx_phys_tlth=20; \
+    config add pb_serdes_lane_rx_phys_g1cnt=1; \
+    config add pb_serdes_lane_tx_phys_amp_12=30; \
+    config add pb_serdes_lane_tx_phys_main_12=18; \
+    config add pb_serdes_lane_tx_phys_pre_12=3; \
+    config add pb_serdes_lane_tx_phys_post_12=13; \
+    config add pb_serdes_lane_tx_phys_amp_13=30; \
+    config add pb_serdes_lane_tx_phys_main_13=18; \
+    config add pb_serdes_lane_tx_phys_pre_13=3; \
+    config add pb_serdes_lane_tx_phys_post_13=13; \
+    config add pb_serdes_lane_tx_phys_amp_14=30; \
+    config add pb_serdes_lane_tx_phys_main_14=18; \
+    config add pb_serdes_lane_tx_phys_pre_14=3; \
+    config add pb_serdes_lane_tx_phys_post_14=13; \
+    config add pb_serdes_lane_tx_phys_amp_15=30; \
+    config add pb_serdes_lane_tx_phys_main_15=18; \
+    config add pb_serdes_lane_tx_phys_pre_15=3; \
+    config add pb_serdes_lane_tx_phys_post_15=13;"
+    
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_3=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_3=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_3=15;  \
+    config add pb_serdes_lane_rx_phys_tlth_3=18;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_3=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_12=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_12=1;  \
+    config add pb_serdes_lane_rx_phys_tlth_12=8;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_13=18;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_13=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_13=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_13=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_13=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_14=17;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_14=2;  \
+    config add pb_serdes_lane_rx_phys_tlth_14=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_15=19;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_15=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_15=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_28=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_28=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_28=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_28=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_28=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_29=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_29=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_29=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_29=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_30=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_30=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_30=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_30=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_30=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_31=12;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_31=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_31=0;  \
+    config add pb_serdes_lane_rx_phys_tlth_31=0;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_31=1;"
+    
+# TX params for fabric rate of 5000 mbps (Negev system).
+# Overrides media type configuration.
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_tx_phys_amp_32=31; \
+    config add pb_serdes_lane_tx_phys_main_32=24; \
+    config add pb_serdes_lane_tx_phys_pre_32=0; \
+    config add pb_serdes_lane_tx_phys_post_32=0; \
+    config add pb_serdes_lane_tx_phys_amp_33=31; \
+    config add pb_serdes_lane_tx_phys_main_33=24; \
+    config add pb_serdes_lane_tx_phys_pre_33=0; \
+    config add pb_serdes_lane_tx_phys_post_33=0; \
+    config add pb_serdes_lane_tx_phys_amp_34=31; \
+    config add pb_serdes_lane_tx_phys_main_34=24; \
+    config add pb_serdes_lane_tx_phys_pre_34=0; \
+    config add pb_serdes_lane_tx_phys_post_34=0; \
+    config add pb_serdes_lane_tx_phys_amp_35=31; \
+    config add pb_serdes_lane_tx_phys_main_35=24; \
+    config add pb_serdes_lane_tx_phys_pre_35=0; \
+    config add pb_serdes_lane_tx_phys_post_35=0; \
+    config add pb_serdes_lane_tx_phys_amp_36=31; \
+    config add pb_serdes_lane_tx_phys_main_36=24; \
+    config add pb_serdes_lane_tx_phys_pre_36=0; \
+    config add pb_serdes_lane_tx_phys_post_36=0; \
+    config add pb_serdes_lane_tx_phys_amp_37=31; \
+    config add pb_serdes_lane_tx_phys_main_37=24; \
+    config add pb_serdes_lane_tx_phys_pre_37=0; \
+    config add pb_serdes_lane_tx_phys_post_37=0; \
+    config add pb_serdes_lane_tx_phys_amp_38=31; \
+    config add pb_serdes_lane_tx_phys_main_38=24; \
+    config add pb_serdes_lane_tx_phys_pre_38=0; \
+    config add pb_serdes_lane_tx_phys_post_38=0; \
+    config add pb_serdes_lane_tx_phys_amp_39=31; \
+    config add pb_serdes_lane_tx_phys_main_39=24; \
+    config add pb_serdes_lane_tx_phys_pre_39=0; \
+    config add pb_serdes_lane_tx_phys_post_39=0; \
+    config add pb_serdes_lane_tx_phys_amp_40=31; \
+    config add pb_serdes_lane_tx_phys_main_40=24; \
+    config add pb_serdes_lane_tx_phys_pre_40=0; \
+    config add pb_serdes_lane_tx_phys_post_40=0; \
+    config add pb_serdes_lane_tx_phys_amp_41=31; \
+    config add pb_serdes_lane_tx_phys_main_41=24; \
+    config add pb_serdes_lane_tx_phys_pre_41=0; \
+    config add pb_serdes_lane_tx_phys_post_41=0; \
+    config add pb_serdes_lane_tx_phys_amp_42=31; \
+    config add pb_serdes_lane_tx_phys_main_42=24; \
+    config add pb_serdes_lane_tx_phys_pre_42=0; \
+    config add pb_serdes_lane_tx_phys_post_42=0"
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_tx_phys_amp_43=31; \
+    config add pb_serdes_lane_tx_phys_main_43=24; \
+    config add pb_serdes_lane_tx_phys_pre_43=0; \
+    config add pb_serdes_lane_tx_phys_post_43=0; \
+    config add pb_serdes_lane_tx_phys_amp_44=31; \
+    config add pb_serdes_lane_tx_phys_main_44=24; \
+    config add pb_serdes_lane_tx_phys_pre_44=0; \
+    config add pb_serdes_lane_tx_phys_post_44=0; \
+    config add pb_serdes_lane_tx_phys_amp_45=31; \
+    config add pb_serdes_lane_tx_phys_main_45=24; \
+    config add pb_serdes_lane_tx_phys_pre_45=0; \
+    config add pb_serdes_lane_tx_phys_post_45=0; \
+    config add pb_serdes_lane_tx_phys_amp_46=31; \
+    config add pb_serdes_lane_tx_phys_main_46=24; \
+    config add pb_serdes_lane_tx_phys_pre_46=0; \
+    config add pb_serdes_lane_tx_phys_post_46=0; \
+    config add pb_serdes_lane_tx_phys_amp_47=31; \
+    config add pb_serdes_lane_tx_phys_main_47=24; \
+    config add pb_serdes_lane_tx_phys_pre_47=0; \
+    config add pb_serdes_lane_tx_phys_post_47=0; \
+    config add pb_serdes_lane_tx_phys_amp_48=31; \
+    config add pb_serdes_lane_tx_phys_main_48=24; \
+    config add pb_serdes_lane_tx_phys_pre_48=0; \
+    config add pb_serdes_lane_tx_phys_post_48=0; \
+    config add pb_serdes_lane_tx_phys_amp_49=31; \
+    config add pb_serdes_lane_tx_phys_main_49=24; \
+    config add pb_serdes_lane_tx_phys_pre_49=0; \
+    config add pb_serdes_lane_tx_phys_post_49=0; \
+    config add pb_serdes_lane_tx_phys_amp_50=31; \
+    config add pb_serdes_lane_tx_phys_main_50=24; \
+    config add pb_serdes_lane_tx_phys_pre_50=0; \
+    config add pb_serdes_lane_tx_phys_post_50=0; \
+    config add pb_serdes_lane_tx_phys_amp_51=31; \
+    config add pb_serdes_lane_tx_phys_main_51=24; \
+    config add pb_serdes_lane_tx_phys_pre_51=0; \
+    config add pb_serdes_lane_tx_phys_post_51=0; \
+    config add pb_serdes_lane_tx_phys_amp_52=31; \
+    config add pb_serdes_lane_tx_phys_main_52=24; \
+    config add pb_serdes_lane_tx_phys_pre_52=0; \
+    config add pb_serdes_lane_tx_phys_post_52=0; \
+    config add pb_serdes_lane_tx_phys_amp_53=31; \
+    config add pb_serdes_lane_tx_phys_main_53=24; \
+    config add pb_serdes_lane_tx_phys_pre_53=0; \
+    config add pb_serdes_lane_tx_phys_post_53=0; \
+    config add pb_serdes_lane_tx_phys_amp_54=31; \
+    config add pb_serdes_lane_tx_phys_main_54=24; \
+    config add pb_serdes_lane_tx_phys_pre_54=0; \
+    config add pb_serdes_lane_tx_phys_post_54=0; \
+    config add pb_serdes_lane_tx_phys_amp_55=31; \
+    config add pb_serdes_lane_tx_phys_main_55=24; \
+    config add pb_serdes_lane_tx_phys_pre_55=0; \
+    config add pb_serdes_lane_tx_phys_post_55=0; \
+    config add pb_serdes_lane_tx_phys_amp_56=31; \
+    config add pb_serdes_lane_tx_phys_main_56=24; \
+    config add pb_serdes_lane_tx_phys_pre_56=0; \
+    config add pb_serdes_lane_tx_phys_post_56=0; \
+    config add pb_serdes_lane_tx_phys_amp_57=31; \
+    config add pb_serdes_lane_tx_phys_main_57=24; \
+    config add pb_serdes_lane_tx_phys_pre_57=0; \
+    config add pb_serdes_lane_tx_phys_post_57=0; \
+    config add pb_serdes_lane_tx_phys_amp_58=31; \
+    config add pb_serdes_lane_tx_phys_main_58=24; \
+    config add pb_serdes_lane_tx_phys_pre_58=0; \
+    config add pb_serdes_lane_tx_phys_post_58=0; \
+    config add pb_serdes_lane_tx_phys_amp_59=31; \
+    config add pb_serdes_lane_tx_phys_main_59=24; \
+    config add pb_serdes_lane_tx_phys_pre_59=0; \
+    config add pb_serdes_lane_tx_phys_post_59=0;"
+
+# RX params for fabric rate of 5000 mbps (Negev system)
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_32=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_32=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_32=21; \
+    config add pb_serdes_lane_rx_phys_tlth_32=35; \
+    config add pb_serdes_lane_rx_phys_g1cnt_32=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_33=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_33=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_33=28; \
+    config add pb_serdes_lane_rx_phys_tlth_33=16; \
+    config add pb_serdes_lane_rx_phys_g1cnt_33=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_34=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_34=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_34=18; \
+    config add pb_serdes_lane_rx_phys_tlth_34=26; \
+    config add pb_serdes_lane_rx_phys_g1cnt_34=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_35=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_35=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_35=23; \
+    config add pb_serdes_lane_rx_phys_tlth_35=14; \
+    config add pb_serdes_lane_rx_phys_g1cnt_35=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_36=22; \
+    config add pb_serdes_lane_rx_phys_z1cnt_36=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_36=22; \
+    config add pb_serdes_lane_rx_phys_tlth_36=30; \
+    config add pb_serdes_lane_rx_phys_g1cnt_36=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_37=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_37=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_37=20; \
+    config add pb_serdes_lane_rx_phys_tlth_37=14; \
+    config add pb_serdes_lane_rx_phys_g1cnt_37=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_38=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_38=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_38=23; \
+    config add pb_serdes_lane_rx_phys_tlth_38=29; \
+    config add pb_serdes_lane_rx_phys_g1cnt_38=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_39=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_39=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_39=24; \
+    config add pb_serdes_lane_rx_phys_tlth_39=30; \
+    config add pb_serdes_lane_rx_phys_g1cnt_39=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_40=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_40=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_40=21; \
+    config add pb_serdes_lane_rx_phys_tlth_40=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_40=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_41=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_41=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_41=20; \
+    config add pb_serdes_lane_rx_phys_tlth_41=6; \
+    config add pb_serdes_lane_rx_phys_g1cnt_41=1;"
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_42=20; \
+    config add pb_serdes_lane_rx_phys_z1cnt_42=3; \
+    config add pb_serdes_lane_rx_phys_dfelth_42=18; \
+    config add pb_serdes_lane_rx_phys_tlth_42=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_42=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_43=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_43=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_43=26; \
+    config add pb_serdes_lane_rx_phys_tlth_43=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_43=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_44=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_44=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_44=22; \
+    config add pb_serdes_lane_rx_phys_tlth_44=34; \
+    config add pb_serdes_lane_rx_phys_g1cnt_44=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_45=22; \
+    config add pb_serdes_lane_rx_phys_z1cnt_45=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_45=18; \
+    config add pb_serdes_lane_rx_phys_tlth_45=16; \
+    config add pb_serdes_lane_rx_phys_g1cnt_45=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_46=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_46=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_46=21; \
+    config add pb_serdes_lane_rx_phys_tlth_46=28; \
+    config add pb_serdes_lane_rx_phys_g1cnt_46=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_47=20; \
+    config add pb_serdes_lane_rx_phys_z1cnt_47=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_47=16; \
+    config add pb_serdes_lane_rx_phys_tlth_47=9; \
+    config add pb_serdes_lane_rx_phys_g1cnt_47=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_48=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_48=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_48=23; \
+    config add pb_serdes_lane_rx_phys_tlth_48=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_48=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_49=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_49=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_49=28; \
+    config add pb_serdes_lane_rx_phys_tlth_49=12; \
+    config add pb_serdes_lane_rx_phys_g1cnt_49=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_50=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_50=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_50=24;"
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_tlth_50=19; \
+    config add pb_serdes_lane_rx_phys_g1cnt_50=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_51=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_51=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_51=22; \
+    config add pb_serdes_lane_rx_phys_tlth_51=20; \
+    config add pb_serdes_lane_rx_phys_g1cnt_51=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_52=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_52=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_52=24; \
+    config add pb_serdes_lane_rx_phys_tlth_52=33; \
+    config add pb_serdes_lane_rx_phys_g1cnt_52=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_53=20; \
+    config add pb_serdes_lane_rx_phys_z1cnt_53=4; \
+    config add pb_serdes_lane_rx_phys_dfelth_53=10; \
+    config add pb_serdes_lane_rx_phys_tlth_53=5; \
+    config add pb_serdes_lane_rx_phys_g1cnt_53=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_54=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_54=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_54=29; \
+    config add pb_serdes_lane_rx_phys_tlth_54=25; \
+    config add pb_serdes_lane_rx_phys_g1cnt_54=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_55=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_55=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_55=24; \
+    config add pb_serdes_lane_rx_phys_tlth_55=22; \
+    config add pb_serdes_lane_rx_phys_g1cnt_55=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_56=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_56=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_56=22; \
+    config add pb_serdes_lane_rx_phys_tlth_56=31; \
+    config add pb_serdes_lane_rx_phys_g1cnt_56=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_57=24; \
+    config add pb_serdes_lane_rx_phys_z1cnt_57=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_57=22; \
+    config add pb_serdes_lane_rx_phys_tlth_57=25; \
+    config add pb_serdes_lane_rx_phys_g1cnt_57=1;"
+
+if $board_type_GFA_BI "\
+    config add pb_serdes_lane_rx_phys_zcnt_58=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_58=1; \
+    config add pb_serdes_lane_rx_phys_dfelth_58=23; \
+    config add pb_serdes_lane_rx_phys_tlth_58=26; \
+    config add pb_serdes_lane_rx_phys_g1cnt_58=1; \
+    config add pb_serdes_lane_rx_phys_zcnt_59=23; \
+    config add pb_serdes_lane_rx_phys_z1cnt_59=2; \
+    config add pb_serdes_lane_rx_phys_dfelth_59=21; \
+    config add pb_serdes_lane_rx_phys_tlth_59=25; \
+    config add pb_serdes_lane_rx_phys_g1cnt_59=1;"
+
+if $board_type_GFA_BI_2 "\
+    echo Configure GFA_BI_2 Port/Interfcae/Nif/SerDes parameters; \
+    config add ucode_port_1=RXAUI3; \
+    config add ucode_port_2=RXAUI2; \
+    config add ucode_port_3=RXAUI1; \
+    config add ucode_port_4=RXAUI0; \
+    config add ucode_port_5=RXAUI8; \
+    config add ucode_port_6=RXAUI9; \
+    config add ucode_port_7=RXAUI5; \
+    config add ucode_port_8=RXAUI4; \
+    config add ucode_port_9=RXAUI12; \
+    config add ucode_port_10=RXAUI13; \
+    config add ucode_port_11=RXAUI10; \
+    config add ucode_port_12=RXAUI11; \
+    config add lanes_swap_6=1; \
+    config add lanes_swap_10=1; \
+    config add lanes_swap_11=1; \
+    config add lanes_swap_12=1; \
+    config add pb_serdes_lane_swap_polarity_tx_12=1; \
+    config add pb_serdes_lane_swap_polarity_tx_14=1; \
+    config add pb_serdes_lane_swap_polarity_tx_28=1; \
+    config add pb_serdes_lane_swap_polarity_tx_31=1; \
+    config add pb_serdes_lane_swap_polarity_tx_32=1; \
+    config add pb_serdes_lane_swap_polarity_tx_34=1; \
+    config add pb_serdes_lane_swap_polarity_tx_41=1; \
+    config add pb_serdes_lane_swap_polarity_rx_48=1; \
+    config add pb_serdes_lane_swap_polarity_rx_50=1; \
+    config add pb_serdes_lane_swap_polarity_rx_52=1; \
+    config add pb_serdes_lane_swap_polarity_rx_55=1; \
+    config add pb_serdes_lane_swap_polarity_rx_56=1; \
+    config add pb_serdes_lane_swap_polarity_rx_58=1;"
+    
+if $board_type_GFA_BI_2 && !$system_is_fe600_in_system "\
+    config add pb_serdes_lane_rx_phys_zcnt=21; \
+    config add pb_serdes_lane_rx_phys_z1cnt=1; \
+    config add pb_serdes_lane_rx_phys_dfelth=1; \
+    config add pb_serdes_lane_rx_phys_tlth=8; \
+    config add pb_serdes_lane_rx_phys_g1cnt=1; \
+    config add pb_serdes_lane_tx_phys_amp=30;  \
+    config add pb_serdes_lane_tx_phys_main=18;  \
+    config add pb_serdes_lane_tx_phys_pre=3;  \
+    config add pb_serdes_lane_tx_phys_post=13;"
+
+#GFA-BI2, with fe600, slot 0
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_12=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_12=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_12=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_13=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_13=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_13=17;  \
+    config add pb_serdes_lane_rx_phys_tlth_13=7;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_13=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_14=18;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_14=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_14=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_14=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_15=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_15=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_15=21;  \
+    config add pb_serdes_lane_rx_phys_tlth_15=21;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_28=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_28=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_28=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_28=8;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_28=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_29=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_29=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_29=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_30=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_30=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_30=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_30=12;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_30=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_31=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_31=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_31=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_31=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_31=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_32=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_32=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_32=22;  \
+    config add pb_serdes_lane_rx_phys_tlth_32=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_32=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_33=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_33=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_33=13;  \
+    config add pb_serdes_lane_rx_phys_tlth_33=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_33=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_34=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_34=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_34=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_34=30;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_34=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_35=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_35=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_35=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_35=5;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_35=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_36=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_36=0;  \
+    config add pb_serdes_lane_rx_phys_dfelth_36=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_36=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_36=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_37=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_37=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_37=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_38=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_38=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_38=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_38=11;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_38=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_39=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_39=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_39=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_39=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_39=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_40=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_40=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_40=24;  \
+    config add pb_serdes_lane_rx_phys_tlth_40=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_40=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_41=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_41=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_41=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_41=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_41=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_42=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_42=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_42=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_42=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_42=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_43=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_43=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_43=25;  \
+    config add pb_serdes_lane_rx_phys_tlth_43=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_43=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_44=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_44=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_44=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_44=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_44=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_45=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_45=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_45=16;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_46=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_46=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_46=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_46=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_46=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_47=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_47=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_47=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_47=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_47=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_48=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_48=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_48=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_48=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_48=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_49=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_49=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_49=15;  \
+    config add pb_serdes_lane_rx_phys_tlth_49=13;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_49=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_50=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_50=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_50=17;  \
+    config add pb_serdes_lane_rx_phys_tlth_50=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_50=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && !$slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_51=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_51=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_51=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_51=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_51=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_52=17;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_52=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_52=6;  \
+    config add pb_serdes_lane_rx_phys_tlth_52=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_52=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_53=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_53=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_53=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_53=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_53=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_54=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_54=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_54=5;  \
+    config add pb_serdes_lane_rx_phys_tlth_54=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_54=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_55=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_55=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_55=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_55=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_55=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_56=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_56=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_56=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_56=21;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_56=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_57=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_57=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_57=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_57=7;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_57=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_58=19;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_58=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_58=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_58=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_58=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_59=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_59=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_59=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_59=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_59=1"
+
+#GFA-BI2, with fe600, slot 1
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_12=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_12=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_12=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_12=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_12=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_13=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_13=4;  \
+    config add pb_serdes_lane_rx_phys_dfelth_13=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_13=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_13=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_14=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_14=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_14=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_14=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_14=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_15=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_15=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_15=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_15=9;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_15=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_28=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_28=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_28=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_28=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_28=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_29=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_29=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_29=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_29=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_29=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_30=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_30=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_30=6;  \
+    config add pb_serdes_lane_rx_phys_tlth_30=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_30=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_31=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_31=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_31=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_31=8;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_31=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_32=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_32=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_32=19;  \
+    config add pb_serdes_lane_rx_phys_tlth_32=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_32=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_33=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_33=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_33=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_33=10;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_33=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_34=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_34=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_34=17;  \
+    config add pb_serdes_lane_rx_phys_tlth_34=20;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_34=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_35=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_35=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_35=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_35=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_35=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_36=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_36=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_36=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_36=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_36=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_37=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_37=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_37=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_37=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_38=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_38=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_38=20;  \
+    config add pb_serdes_lane_rx_phys_tlth_38=14;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_38=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_39=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_39=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_39=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_39=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_39=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_40=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_40=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_40=24;  \
+    config add pb_serdes_lane_rx_phys_tlth_40=18;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_40=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_41=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_41=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_41=11;  \
+    config add pb_serdes_lane_rx_phys_tlth_41=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_41=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_42=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_42=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_42=10;  \
+    config add pb_serdes_lane_rx_phys_tlth_42=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_42=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_43=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_43=4;  \
+    config add pb_serdes_lane_rx_phys_dfelth_43=22;  \
+    config add pb_serdes_lane_rx_phys_tlth_43=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_43=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_44=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_44=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_44=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_44=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_44=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_45=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_45=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_45=16;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_45=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_46=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_46=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_46=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_46=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_46=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_47=22;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_47=1;  \
+    config add pb_serdes_lane_rx_phys_dfelth_47=9;  \
+    config add pb_serdes_lane_rx_phys_tlth_47=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_47=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_48=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_48=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_48=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_48=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_48=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_49=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_49=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_49=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_49=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_49=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_50=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_50=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_50=18;  \
+    config add pb_serdes_lane_rx_phys_tlth_50=11;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_50=1"
+if $board_type_GFA_BI_2 && $system_is_fe600_in_system && $slot "\
+    config add pb_serdes_lane_rx_phys_zcnt_51=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_51=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_51=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_51=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_51=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_52=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_52=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_52=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_52=2;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_52=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_53=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_53=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_53=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_53=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_53=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_54=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_54=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_54=7;  \
+    config add pb_serdes_lane_rx_phys_tlth_54=3;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_54=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_55=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_55=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_55=12;  \
+    config add pb_serdes_lane_rx_phys_tlth_55=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_55=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_56=24;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_56=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_56=21;  \
+    config add pb_serdes_lane_rx_phys_tlth_56=16;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_56=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_57=23;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_57=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_57=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_57=4;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_57=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_58=17;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_58=3;  \
+    config add pb_serdes_lane_rx_phys_dfelth_58=8;  \
+    config add pb_serdes_lane_rx_phys_tlth_58=1;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_58=1;  \
+    config add pb_serdes_lane_rx_phys_zcnt_59=21;  \
+    config add pb_serdes_lane_rx_phys_z1cnt_59=2;  \
+    config add pb_serdes_lane_rx_phys_dfelth_59=14;  \
+    config add pb_serdes_lane_rx_phys_tlth_59=12;  \
+    config add pb_serdes_lane_rx_phys_g1cnt_59=1"
+ 
+# DRAM pre-configurations according to config variables which defines
+# the dram type.
+
+#DDR3
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333 || \
+   $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600 || \
+   $?dram_type_DDR3_MICRON_MT41J64M16_15E || \
+   $?dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G "\
+    config add ext_ram_type=DDR3; \
+    config add ext_ram_columns=1024; \
+    config add ext_ram_banks=8" 
+if $?dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G "\
+  config add ext_ram_total_size=3072"
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333 || \
+   $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600 || \
+   $?dram_type_DDR3_MICRON_MT41J64M16_15E "\
+    config add ext_ram_total_size=1536"
+
+#GDDR3
+if $?dram_type_GDDR3_SAMSUNG_K4J52324QE \
+  "config add ext_ram_type=GDDR3" \
+  "config add ext_ram_columns=512" \
+  "config add ext_ram_banks=8" \
+  "config add ext_ram_total_size=384"
+
+#DDR2
+if $?dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7 \
+  "config add ext_ram_type=DDR2" \
+  "config add ext_ram_columns=1024" \
+  "config add ext_ram_banks=4" \
+  "config add ext_ram_total_size=768"
+   
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1600 \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=32" \
+  "config add ext_ram_c_cas_latency=11" \
+  "config add ext_ram_c_wr_latency=8" \
+  "config add ext_ram_t_rc=48750" \
+  "config add ext_ram_t_rfc=110000" \
+  "config add ext_ram_t_ras=35000" \
+  "config add ext_ram_t_faw=40000" \
+  "config add ext_ram_t_rcd_rd=13750" \
+  "config add ext_ram_t_rcd_wr=13750" \
+  "config add ext_ram_t_rrd=7500" \
+  "config add ext_ram_t_ref=3900" \
+  "config add ext_ram_t_rp=13750" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=7500" \
+  "config add ext_ram_t_rtp=7500"
+
+if $?dram_type_DDR3_SAMSUNG_K4B1G1646E_HCK0_1333 \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=32" \
+  "config add ext_ram_c_cas_latency=9" \
+  "config add ext_ram_c_wr_latency=8" \
+  "config add ext_ram_t_rc=50000" \
+  "config add ext_ram_t_rfc=110000" \
+  "config add ext_ram_t_ras=36666" \
+  "config add ext_ram_t_faw=45000" \
+  "config add ext_ram_t_rcd_rd=15000" \
+  "config add ext_ram_t_rcd_wr=15000" \
+  "config add ext_ram_t_rrd=8333" \
+  "config add ext_ram_t_ref=3900" \
+  "config add ext_ram_t_rp=15000" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=8333" \
+  "config add ext_ram_t_rtp=6666"
+
+if $?dram_type_DDR3_MICRON_MT41J64M16_15E || $?dram_type_DDR3_MICRON_MT41J128M16HA_15E_2G \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=32" \
+  "config add ext_ram_c_cas_latency=9" \
+  "config add ext_ram_c_wr_latency=7" \
+  "config add ext_ram_t_rc=49500" \
+  "config add ext_ram_t_rfc=110000" \
+  "config add ext_ram_t_ras=36000" \
+  "config add ext_ram_t_faw=50000" \
+  "config add ext_ram_t_rcd_rd=13500" \
+  "config add ext_ram_t_rcd_wr=13500" \
+  "config add ext_ram_t_rrd=7500" \
+  "config add ext_ram_t_ref=3900c" \
+  "config add ext_ram_t_rp=13500" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=7500" \
+  "config add ext_ram_t_rtp=7500"
+
+# Samsung (K4J52324QE)
+# The following parameters correspond to BC-16 dash, and were tested in
+# dune's lab with BC-14 dash dram working in frequency of 533MHz.
+if $?dram_type_GDDR3_SAMSUNG_K4J52324QE \
+  "config add ext_ram_ap_bit_pos=8" \
+  "config add ext_ram_burst_size=16" \
+  "config add ext_ram_gddr3_mrs0_wr1=0x00000312" \
+  "config add ext_ram_gddr3_emr0_wr1=0x0000109d" \
+  "config add ext_ram_c_cas_latency=9" \
+  "config add ext_ram_c_wr_latency=1" \
+  "config add ext_ram_t_rc_clk=24" \
+  "config add ext_ram_t_rfc_clk=29" \
+  "config add ext_ram_t_ras_clk=16" \
+  "config add ext_ram_t_faw_clk=5" \
+  "config add ext_ram_t_rcd_rd_clk=9" \
+  "config add ext_ram_t_rcd_wr_clk=6" \
+  "config add ext_ram_t_rrd_clk=7" \
+  "config add ext_ram_t_ref=1450" \
+  "config add ext_ram_t_rp_clk=8" \
+  "config add ext_ram_t_wr_clk=8" \
+  "config add ext_ram_t_wtr_clk=4" \
+  "config add ext_ram_t_rtp_clk=4"
+
+if $?dram_type_DDR2_MICRON_K4T51163QE_ZC_LF7 \
+  "config add ext_ram_ap_bit_pos=10" \
+  "config add ext_ram_burst_size=16" \
+  "config add ext_ram_auto_mode=TRUE" \
+  "config add ext_ram_c_cas_latency=6" \
+  "config add ext_ram_c_wr_latency=5" \
+  "config add ext_ram_t_rc=60000" \
+  "config add ext_ram_t_rfc=105000" \
+  "config add ext_ram_t_ras=45000" \
+  "config add ext_ram_t_faw=45000" \
+  "config add ext_ram_t_rcd_rd=15000" \
+  "config add ext_ram_t_rcd_wr=15000" \
+  "config add ext_ram_t_rrd=10000" \
+  "config add ext_ram_t_ref=3900)" \
+  "config add ext_ram_t_rp=15000" \
+  "config add ext_ram_t_wr=15000" \
+  "config add ext_ram_t_wtr=7500" \
+  "config add ext_ram_t_rtp=7500"
+
+
+# If using elk, override relevant parameters:
+if $?pcp_elk "\
+  echo *** OVERRIDING DEFAULT CONFIG WITH ELK CONFIG ***; \
+  config combo_ref_clock=125000; \
+  config pb_serdes_qrtt_max_expected_rate_7=3750000; \
+  config pb_serdes_lane_rate_28=3750000; \
+  config pb_serdes_lane_rate_29=3750000; \
+  config pb_serdes_lane_rate_30=3750000; \
+  config pb_serdes_lane_rate_31=3750000; \
+  config add external_lookup_mal=14; \
+  config add spaui_ipg_dic_mode=MIN; \
+  config add spaui_ipg_size=1; \
+  config add spaui_crc_mode=32b; \
+  config add spaui_preamble_size=0; \
+  config add spaui_preamble_skip_sop=1; \
+  config add spaui_is_double_size_sop_even_only=1; \
+  config add spaui_link_partner_double_size_bus=1"
+
+if $?pcp_elk || $?pcp_oam || $?pcp_dma "\
+  config add streaming_if_multi_port_mode=1; \
+  config add streaming_if_discard_pkt_streaming=0; \
+  config add fabric_ftmh_outlif_extension=IF_MC" \
+else "\
+  config add streaming_if_multi_port_mode=0; \
+  config add streaming_if_discard_pkt_streaming=1;"
+
+# Run sweep pcp on real HW
+if !$?plisim && !$?warmboot "   \
+  sweep pcp"
+  
+# Set synts according to reference clocks
+expr $nif_ref_clock*1000; local synt_nif $?
+expr $combo_ref_clock*1000; local synt_combo $?
+expr $fabric_ref_clock*1000; local synt_fabric $?
+
+# Real HW: Take petra out of reset
+if !$?plisim && !$?warmboot " \
+  gfa_bi utils petra_reset 1; \
+  echo Configure synthesizers:; \
+  echo Fabric: $synt_fabric; gfa_bi utils synt_set 1 $synt_fabric $synt_over; \
+  echo Combo:  $synt_combo;  gfa_bi utils synt_set 2 $synt_combo $synt_over; \
+  echo Nif:    $synt_nif;    gfa_bi utils synt_set 3 $synt_nif $synt_over; \
+  echo Core:   $synt_core;   gfa_bi utils synt_set 4 $synt_core $synt_over; \
+  echo DDR:    $synt_ddr;    gfa_bi utils synt_set 5 $synt_ddr $synt_over; \
+  echo Phy:    $synt_phy;    gfa_bi utils synt_set 10 $synt_phy $synt_over; \
+  gfa_bi utils petra_reset 0"
+  
+dbm soc error
+dbm bcm error
+
+echo "$unit:init soc"
+init soc
+echo "$unit:init soc - Done"
+
+echo "$unit:init bcm"
+init bcm
+
+echo "$unit:init bcm - Done"
+
+if $?warmboot "\
+  echo 'Warmboot: init done'; \
+  echo 'dune.soc: Done.'; \
+  exit"
+
+# Real HW + non using sweep: Init phys
+if !$?plisim " \
+  gfa_bi utils phys"
+
+if !$?no_bcm && !$?diag_disable "\
+  init appl_dpp $slot $nof_devices $diag_cosq_disable;" \
+else "\
+  echo 'Skipping diag_init. In order to run traffic, extra configuration must be performed.'"
+
+# If running BCM library:
+# Start linkscan task and set port linkscan mode.
+if !$?no_bcm && !$?pcp_elk "\
+  linkscan 250000; \
+  linkscan spbm=xe"
+     
+# If using elk, configure  bsp:
+if $?pcp_elk "\
+  echo *** BSP ELK CONFIGURATIONS ***; \
+  gfa_bi elk_init;"
+  
+# If using pcp dma then init dma
+if !$?plisim && $?pcp_dma " \
+  echo *** PCP DMA CONFIGURATIONS ***; \
+  gfa_bi dma_init"
+
+#if $?diag_chassis && !$slot "rcload rc/negev_rpc_master.soc.assi" # Master on slot 0
+#if $?diag_chassis && $slot "rcload rc/negev_rpc_slave.soc.assi"   # Slave on slot 1
+
+echo "dune.soc: Done."
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/mk_bcm_node.sh b/bal_release/3rdparty/bcm-sdk/rc/svk4/mk_bcm_node.sh
new file mode 100755
index 0000000..80ce413
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/mk_bcm_node.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+mknod /dev/linux-user-bde c 126 0
+mknod /dev/linux-kernel-bde c 127 0
+mknod /dev/linux-uk-proxy c 125 0
+  
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/qax.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/qax.soc
new file mode 100644
index 0000000..895ae81
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/qax.soc
@@ -0,0 +1,128 @@
+#
+# $Id: qax.soc,v 1.90 2013/08/14 08:32:00 ninash Exp $
+#
+# $Copyright: (c) 2011 Broadcom Corporation
+# All Rights Reserved.$
+#
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+#der 0x40 4
+#exit
+
+debug info
+debug appl rcload warn
+debug appl symtab warn
+debug bcm rx,tx,link,attach warn
+debug soc tests warn
+debug soc rx,phy,schan,reg,socmem,dma,mem,miim,mii,intr,counter,ddr warn
+debug soc common err
+debug sys verinet warn
+debug soc physim warn
+
+if $?QAX \
+    'rcload bcm88470_board.soc'
+
+if $?QUX \
+    'rcload bcm88270_board.soc'
+
+# Load DRAM tuning properties from local File. RcLoad will not fail if file not found, and will not show errors of missing file.
+set RCError=off
+debug appl shell warn
+if $?QAX \
+    'rcload /home/negev/bcm88470_dram_tune.soc'
+if $?QUX \
+    'rcload /home/negev/bcm88270_dram_tune.soc'
+
+debug appl shell =
+set RCError=on
+
+set RCError=off
+rcload combo28_dram.soc
+set RCError=on
+
+#Set fabric connect mode as FE for multi FAP system
+if $?diag_chassis " \
+   config add fabric_connect_mode.BCM88470=FE"
+
+# Set modid:
+# If diag_chassis is enabled (two line cards), and 'slot' is defined (slot is defined only when
+# working without a management card - set modid to be 'slot'
+# Otherwise (single line card, or management card), set modid to be 0 for unit 0, and 1 for unit != 0
+if $?diag_chassis && $?slot "\
+  local modid $slot" \
+else "\
+  local modid $unit"
+expr $modid==1; if $? "local modid 2"
+
+if $?module_id " \
+  local modid $module_id"
+
+echo "$unit: modid=$modid"
+
+# Set base_modid:
+# Id base_module_id is set, then set base_modid to have base_module_id value.
+# Otherwise, set base_modid to be 0.
+if $?base_module_id " \
+  local base_modid $base_module_id" \
+else " \
+  local base_modid 0"
+
+expr $base_modid > 0
+if $? " \
+  echo '$unit: base_modid=$base_modid'"
+
+if $?diag_chassis " \
+  local nof_devices 2" \
+else "\
+  local nof_devices 1"
+
+if $?n_devices " \
+  local nof_devices $n_devices"
+
+expr $nof_devices > 1
+if $? " \
+  echo '$unit: nof_devices=$nof_devices'"
+
+if $?mng_cpu " \
+  echo '$unit:management card - polling is set on'; \
+  config add polled_irq_mode.BCM88675=1; \
+  config add schan_intr_enable.BCM88675=0; \
+  config add tdma_intr_enable.BCM88675=0; \
+  config add tslam_intr_enable.BCM88675=0; \
+  config add miim_intr_enable.BCM88675=0; "
+
+#Counters unavailable in cmodel
+if $?cmodel " \
+  config add counter_engine_sampling_interval=0;"
+
+#default values in a case which these parameters are not exist
+if !$?diag_cosq_disable "\
+  local diag_cosq_disable 0"
+if !$?warmboot "\
+  local warmboot 0"
+if !$?diag_disable "\
+  local diag_disable 0"
+if !$?diag_no_itmh_prog_mode "\
+  local diag_no_itmh_prog_mode 0"
+if !$?l2_mode "\
+  local l2_mode 0"
+
+#Disable interrupts in cmodel
+if $?cmodel "\
+  local no_intr 1" \
+else "\
+  local no_intr 0"
+
+if $?QUX "\
+    local no_elk 1" \
+else "\
+    local no_elk 0"
+
+INIT_DNX ModID=$modid NofDevices=$nof_devices CosqDisable=$diag_cosq_disable NoAppl=$diag_disable Warmboot=$warmboot NoRxLos=1 NoLinkscan=0 NoElkDevice=$no_elk NoElkAppl=0 NoItmhProgMode=$diag_no_itmh_prog_mode L2Mode=$l2_mode NoIntr=$no_intr
+
+#echo "performing force forward to sysport 1"
+#mod IHP_PINFO_LLR 0 256 DEFAULT_CPU_TRAP_CODE=200 DEFAULT_ACTION_PROFILE_FWD=7
+#mod IHB_FWD_ACT_PROFILE 200 1 FWD_ACT_DESTINATION=0x10001 FWD_ACT_DESTINATION_OVERWRITE=1
+#echo "performing credit flush from NIF to EGQ"
+#m NBIH_TX_EGRESS_CREDITS_DEBUG_PM TX_FLUSH_EGRESS_PORT_0_MLF_0_QMLF_N=1 TX_FLUSH_EGRESS_PORT_0_MLF_1_QMLF_N=1 TX_FLUSH_EGRESS_PORT_0_MLF_2_QMLF_N=1 TX_FLUSH_EGRESS_PORT_0_MLF_3_QMLF_N=1
+echo "qax.soc: Done."
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/rc.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/rc.soc
new file mode 100644
index 0000000..b38ed6f
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/rc.soc
@@ -0,0 +1,1790 @@
+# $Id: rc.soc,v 1.192 2013/07/17 22:13:43 dkelley Exp $
+# $Copyright: (c) 1998-2001 Broadcom Corp.
+# All Rights Reserved.$
+#
+# Initialization RC (run commands) file
+#
+#       These are default commands that are read and executed by default
+#       when BCM boots up.  Typically this file is called rc.soc and resides
+#       in the flash filesystem, NVRAM, or disk.
+#
+# Board Configuration Setting
+#
+#       This file uses configuration properties to know on which board
+#       it is running.  Currently one of following settings must be made:
+#
+#       BCM95670K8          config add herc8=1
+#       BCM95690K24         config add draco_b2b=1
+#       BCM95690K24S        config add draco_stk=1
+#       BCM95690R24         config add galahad=1
+#       BCM95690R24S        config add merlin=1
+#       BCM95690R48S        config add lancelot=1
+#       BCM95691K12         config add draco_k12=1
+#       White Knight        config add white_knight=1 (not shipping)
+#       Black Knight        config add black_knight=1 (not shipping)
+#       BCM95673K2S         config add twolynx=1
+#       BCM95673R8          config add herculynx=1
+#       BCM95673R24S        config add lynxalittle=1
+#       BCM95673R48S        config add lynxalot=1
+#       BCM95695P24SX_10    config add guenevere=1
+#       BCM95650K24         config add magnum=1 (automatic for 5650L)
+#       BCM95675            config add herc8_15=1
+#       BCM95650R24         config add tuc24_ref=1
+#       BCM95695P48LM       config add lm48p=1
+#       BCM95695P48LM-10    config add lm48p_B=1
+#       BCM956504P48LM-10   config add lm48p_C=1
+#       BCM956504P48LM-20   config add lm48p_C=1
+#       BCM956504P48LM-50   config add lm48p_D=1
+#       BCM956504P48POEREF  config add fbpoe=1
+#       BCM956504P24REF P0  config add fb24=1
+#       BCM956504P24    P0  config add fb24=1
+#       BCM956102P48        config add felix48=1
+#       BCM953300P24REF     config add mirage24=1
+#       BCM956800K20C       config add bradley_1g=1
+#       BCM956700K16        config add humv=1
+#       BCM956800K20        config add bradley=1
+#       BCM956580K16        config add goldwing=1
+#       BCM956314P24REF     config add bcm56314p24ref=1
+#       BCM956024P48REF     config add BCM956024P48REF=1
+#       BCM956224P48REF     config add BCM956224P48REF=1
+#       BCM956224R50T       config add BCM956224R50T=1
+#       BCM956024R50T       config add BCM956024R50T=1
+#       BCM56820K24XG       config add BCM56820K24XG=1
+#       BCM953314R24GS      config add BCM953314R24GS=1
+#       BCM953314K24        config add BCM953314K24=1
+#       BCM956820R24XG      config add BCM956820R24XG=1
+#       BCM956160R          config add bcm956160r=1
+
+if $?BCM56146_A0 \
+    'local BCM56146 1'
+
+if $?BCM56147_A0 \
+    'local BCM56147 1'
+
+
+if $?1 "echo rc: arguments not supported; exit"
+if !$?unit "echo rc: no current unit; exit"
+
+echo "rc: unit $unit device $devname"
+local quiet no
+local echo echo
+local rcdone \$rc$unit
+if !"expr $rcdone + 0" "local echo noecho; local quiet yes"
+
+# Set convenience local variables
+
+# simulation related
+#if $?plisim \
+#       "local no_bcm 1"
+if $?quickturn || $?plisim \
+	"local simulator 1"
+
+if $?simulator \
+    'echo -n "Chip init starts at: ";date'
+
+# board related
+if $?galahad \
+	"local draco_b2b 1"
+if $?black_knight || $?white_knight || $?merlin \
+	"local draco_herc4 1"
+
+#if $?QUX_A0 \
+#    'echo blablabla;der 0x40 4 ; exit'
+
+if $?FLAIR_A0 \
+    'echo blablabla;der 0x40 4 ; exit'
+
+if $?BCM88750_A0 || $?BCM88750_B0 || $?BCM88753_A0 || $?BCM88753_B0 || $?BCM88752_A0 || $?BCM88752_B0 ||  $?BCM88755_B0 || $?BCM88754_A0 || $?BCM88770_A1 || $?BCM88773_A1 || $?BCM88774_A1 || $?BCM88775_A1 || $?BCM88776_A1 || $?BCM88777_A1 || $?BCM88950_A0 || $?BCM88950_A1 || $?BCM88953_A1 || $?BCM88954_A1 || $?BCM88955_A1 || $?BCM88956_A1 || $?BCM88952_A0 || $?BCM88952_A1 || $?BCM88772_A1 \
+    'rcload dfe.soc ; exit'
+
+if $?BCM88790_A0 \
+    'rcload dnxf.soc ; exit'
+
+if $?ARAD_A0 || $?ARAD_B0 || $?ARAD_B1 || $?ARADPLUS_A0 || $?BCM88650_A0 || $?BCM88650_B0 || $?BCM88650_B1 || $?BCM88652_A0 || $?BCM88652_B0 || $?BCM88350_B1 || $?BCM88351_B1 || \
+   $?BCM88450_B1 || $?BCM88451_B1 || $?BCM88550_B1 || $?BCM88551_B1 || $?BCM88552_B1 || $?BCM88651_B1 || $?BCM88654_B1 || $?BCM88660_A0 || $?BCM88360_A0 || $?BCM88361_A0 || $?BCM88363_A0 ||\
+   $?BCM88460_A0 || $?BCM88461_A0 || $?BCM88560_A0 || $?BCM88561_A0 || $?BCM88562_A0 || $?BCM88661_A0 || $?BCM88664_A0  \
+    'rcload arad.soc ; exit'
+
+if $?BCM83207_A0 \
+    'rcload samar.soc ; exit'
+if $?BCM83208_A0 \
+    'rcload sinai.soc ; exit'
+
+if $?QAX_A0 || $?BCM88470_A0 || $?BCM88471_A0 || $?BCM88473_A0 || $?BCM88474_A0 || $?BCM88474H_A0 || $?BCM88476_A0 || $?BCM88477_A0 || \
+   $?QAX_B0 || $?BCM88470_B0 || $?BCM88471_B0 || $?BCM88473_B0 || $?BCM88474_B0 || $?BCM88474H_B0 || $?BCM88476_B0 || $?BCM88477_B0 \
+    'setenv QAX 1'
+    
+if $?QUX_A0 || $?BCM88270_A0 \
+    'setenv QUX 1'
+
+if $?JERICHO_A0 ||  $?BCM88670_A0 || $?BCM88671_A0 || $?BCM88671M_A0 || $?BCM88672_A0 || $?BCM88673_A0 || $?BCM88674_A0 || $?BCM88675_A0 || $?BCM88675M_A0 || $?BCM88676_A0 || $?BCM88676M_A0 || $?BCM88677_A0 || $?BCM88678_A0 || $?BCM88679_A0 || \
+   $?JERICHO_A1 ||  $?BCM88670_A1 || $?BCM88671_A1 || $?BCM88671M_A1 || $?BCM88672_A1 || $?BCM88673_A1 || $?BCM88674_A1 || $?BCM88675_A1 || $?BCM88675M_A1 || $?BCM88676_A1 || $?BCM88676M_A1 || $?BCM88677_A1 || $?BCM88678_A1 || $?BCM88679_A1 || \
+   $?QMX_A0     ||  $?BCM88370_A0 || $?BCM88371_A0 || $?BCM88371M_A0 || $?BCM88375_A0 || $?BCM88376_A0 || $?BCM88376M_A0 || $?BCM88377_A0 || $?BCM88378_A0 || $?BCM88379_A0 || \
+   $?QMX_A1     ||  $?BCM88370_A1 || $?BCM88371_A1 || $?BCM88371M_A1 || $?BCM88375_A1 || $?BCM88376_A1 || $?BCM88376M_A1 || $?BCM88377_A1 || $?BCM88378_A1 || $?BCM88379_A1 || \
+   $?JERICHO_B0 ||  $?BCM88670_B0 || $?BCM88671_B0 || $?BCM88671M_B0 || $?BCM88672_B0 || $?BCM88673_B0 || $?BCM88674_B0 || $?BCM88675_B0 || $?BCM88675M_B0 || $?BCM88676_B0 || $?BCM88676M_B0 || $?BCM88677_B0 || $?BCM88678_B0 || $?BCM88679_B0 || $?BCM88680_A0 || \
+   $?QMX_B0     ||  $?BCM88370_B0 || $?BCM88371_B0 || $?BCM88371M_B0 || $?BCM88375_B0 || $?BCM88376_B0 || $?BCM88376M_B0 || $?BCM88377_B0 || $?BCM88378_B0 || $?BCM88379_B0 || $?BCM88379_A1 || \
+   $?JERPLUS    ||  $?BCM88680_A0 ||  $?BCM88681_A0 ||  $?BCM88682_A0 || $?BCM88683_A0 ||  $?BCM88380_A0 ||  $?BCM88381_A0 \
+    'rcload jer.soc ; exit'
+
+if $?BCM88690_A0  \
+    'rcload dnx.soc ; exit'
+
+if $?QAX || $?QUX\
+    'rcload qax.soc ;  exit'
+
+
+if $?BCM88202_A0 || $?ARDON_A0 || $?BCM88202_A1 || $?ARDON_A1 || $?BCM88202_A2 || $?ARDON_A2\
+    'rcload atmf.soc ; exit'
+
+if $?ACP \
+    'exit'
+
+if $?BCM88690_A0\
+    'exit'
+      
+if !"expr $pcidev + 0 == 0x5650" \
+	"local magnum 1"
+if $?drac || $?drac15 \
+	"local drac_any 1"
+if $?lynx || $?lynx15 \
+	"local lynx_any 1"
+if $?tucana || $?magnum \
+	"local tucana_any 1"
+if $?herc || $?herc15 \
+	"local herc_any 1"
+if $?firebolt || $?firebolt2 || $?helix || \
+   $?felix || $?helix15 || $?felix15 || $?raptor || $?raven || $?hawkeye\
+	"local firebolt_any 1"
+if !"expr $pcidev + 0 == 0xb501" \
+	"local firebolt_10x4 1"
+if $?easyrider \
+	"local easyrider_any 1"
+if !"expr $pcidev + 0 == 0xb602" \
+	"local easyrider_1x1 1"
+if $?bradley || $?humv || $?goldwing \
+	"local bradley_any 1"
+if $?drac_any || $?lynx_any || $?tucana_any \
+	"local xgs12_switch 1"
+if $?firebolt_any || $?easyrider_any || $?bradley_any \
+	"local xgs3_switch 1"
+if $?xgs12_switch || $?xgs3_switch \
+	"local xgs_switch 1"
+if $?herc_any \
+	"local xgs_fabric 1"
+if $?xgs_fabric || $?xgs_switch \
+	"local xgs 1"
+if !$?xgs \
+	"local strata 1"
+if $?strata && !$?gsl \
+	"local PBMP_ALL 0x0bffffff"
+if $?strata && $?gsl \
+	"local PBMP_ALL 0x080000ff"
+if $?BCM56214_A0 || $?BCM56014_A0 || $?BCM56215_A0 || \
+   $?BCM56214_A1 || $?BCM56014_A1 || $?BCM56215_A1 && \
+   !$?BCM956024P48REF \
+	"local rap24_ref 1"
+
+if $?BCM5655_A0 || $?BCM5655_B0 \
+        "local tucana_nohg 1"
+
+if $?BCM956024P48REF || $?BCM956224P48REF || $?BCM956024R50T || \
+   $?BCM956224R50T \
+        "local raven_eb_48p 1"
+
+if $?BCM953314R24GS \
+        "local hawkeye_p24 1"
+
+if $?BCM953314K24 \
+        "local hawkeye_k24 1"
+
+if $?firebolt_any && $?lm48p || $?lm48p_D \
+        "config add lmfb48=1"
+
+# Set software's wait for S-Channel response to 3 seconds for QuickTurn
+# (Recommend at least 10 seconds if the ARL is 100% busy with inserts.)
+if $?quickturn	"stimeout 3000000"
+if $?plisim	"stimeout 60000000"
+
+# Direct phy led programming: 5464 activity led becomes link/activity
+if $?drac_any && $?lancelot || $?lynxalot || $?guenevere \
+	"config add phy_led_ctrl=0x18"
+
+# Shutdown threads if system is already running
+if $?triumph3 \
+	"ibodSync off"
+counter off
+linkscan off
+if $?feature_arl_hashed && !$?simulator \
+        "l2mode off"
+if $?feature_ces && $?BCM56440_A0 \
+        "ces off"
+
+# Test on-chip memory before initializing
+#if !$?simulator "init soc; bist l3 arl cbp"
+init soc
+
+# Initialize miscellaneous chip registers
+init misc
+
+# Initialize external TCAM if necessary
+# NOTE : tcam is initialized during "init misc" unless 
+#        tcam_reset_toggle = 1 is configured
+if "expr $rcdone + 0" && !"expr $tcam_reset_toggle + 0" \
+        "dispatch attach 0 esw 0"
+if !"expr $tcam_reset_toggle + 0" "muxsel 0; muxsel 0x80"
+if !"expr $tcam_reset_toggle + 0" "init tcam; $echo rc: TCAM initialized"
+
+# Initialize the StrataSwitch MMU registers
+init mmu
+if $?katana2 \
+   kt2config.soc
+
+
+# Uncomment to turn off Single-Bit Error reporting on 5670
+#if $?herc "m mmu_intcntl pp_sbe_en=0"
+
+# Initialize Cell Free Address Pool
+# NOTE: this should NOT be done unless chip is known to have bad CFAP
+# memory entries that need to be mapped out.
+if $?cfap_tests "$echo rc: Initializing CFAP; cfapinit"
+
+$echo rc: MMU initialized
+
+#
+# Load uKernel
+#
+
+# Pick default FW names if not set already by config
+if !$?fw_core_0 \
+    'local fw_core_0 ${fw_prefix}_0_bfd_bhh.srec; \
+     if $?greyhound || $?hurricane2 || $?hurricane3 "local fw_core_0 ${fw_prefix}_0_ptpfull.srec"; \
+     if $?caladan3 "local fw_core_0 ${fw_prefix}_0.srec"; \
+     if $?helix4 && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?helix4 && $?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd_bhh.srec"; \
+     if $?tomahawk && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?tomahawk_plus && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+     if $?trident2plus && !$?feature_bhh "local fw_core_0 ${fw_prefix}_0_bfd.srec"; \
+    '
+
+if !$?fw_core_1 \
+   'local fw_core_1 ${fw_prefix}_1_ptpfull.srec; \
+    if $?caladan3 "local fw_core_1 ${fw_prefix}_1_bs.srec"; \
+   '
+
+if !$?fw_core_2 \
+   "local fw_core_2 ${fw_prefix}_2_eth_lmdm.srec"
+
+# Load the firmwares
+if $?feature_cmicm && !$?rcpu_only && !$ihost_mode && !$?feature_iproc \
+    "mcsload 0 ${fw_core_0} InitMCS=true; \
+     mcsload 1 ${fw_core_1};"
+
+if $?hurricane2 \
+   "mcsload 0 ${fw_core_0} InitMCS=true;"
+
+if $?feature_iproc && !$?hurricane2 && !$?hurricane3 && !$?rcpu_only && !$?feature_uc_mhost && !$ihost_mode\
+    "mcsload 0 ${fw_core_0} InitMCS=true TwoStage=true TwoStageAddr=0x60000000;\
+     mcsload 1 ${fw_core_1} TwoStage=true TwoStageAddr=0x6002c000;"
+
+if $?feature_iproc && !$?rcpu_only && $?feature_uc_mhost && $?num_ucs\
+    'if !"expr $num_ucs > 0" "mcsload 0 ${fw_core_0} InitMCS=true"; \
+     if !"expr $num_ucs > 1" "mcsload 1 ${fw_core_1}"; \
+     if !"expr $num_ucs > 2" "mcsload 2 ${fw_core_2}";'
+
+#
+# Init CLI and BCM API
+#
+# This must be done after the raw register writes to avoid having state
+# clobbered.  NOTE: Tables are cleared by "init bcm" below.  If
+# table modifications are required, put them after "init bcm".  Some
+# registers might also be affected.
+#
+
+if !$?no_bcm \
+	"init bcm; \
+	 $echo rc: BCM driver initialized"
+
+if $?no_bcm \
+	"$echo rc: *** NOT initializing BCM driver ***"
+
+if $?no_bcm && $?strata \
+    'write vtable 0 1 VLAN_TAG=0,PORT_BITMAP=0,UT_PORT_BITMAP=0; \
+     insert vtable VLAN_TAG=1,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+     local pv \
+         VLAN_TAG=1,SP_ST=3,PORT_BITMAP=$PBMP_ALL,UT_PORT_BITMAP=$PBMP_ALL; \
+	 write ptable 0 32 PTYPE=0; \
+	 if !$?gsl "write ptable 0 24 $pv,PTYPE=1"; \
+	 if !$?gsl "write ptable 24 2 $pv,PTYPE=2"; \
+	 if $?gsl  "write ptable 0 8 $pv,PTYPE=2"; \
+	 write ptable 27 1 $pv,PTYPE=3; \
+     local pv'
+
+# Turn on mirroring of hardware ARL operations into software ARL table.
+if $?feature_arl_sorted \
+	"arlmode intr_dma; \
+	 $echo rc: ARL DMA shadowing enabled"
+
+if $?feature_arl_hashed && !$?simulator && !$?rcpu_only \
+	"l2mode interval=3000000; \
+	 $echo rc: L2 Table shadowing enabled"
+
+# If running BCM library, start linkscan task and set port modes
+
+if !$?no_bcm && !$?rcpu_only \
+	"linkscan 250000; \
+	 port fe,ge linkscan=on autoneg=on \
+		speed=0 fullduplex=true txpause=true rxpause=true; \
+	 port st linkscan=on txpause=false rxpause=false; \
+         port xe,ce linkscan=on autoneg=off \
+                speed=0 fullduplex=true txpause=true rxpause=true; \
+         port hg linkscan=on fullduplex=true txpause=false rxpause=false; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?rcpu_only \
+	"linkscan 250000; \
+	 port e linkscan=on; \
+	 port st linkscan=on; \
+     port xe linkscan=on; \
+	 $echo rc: Port modes initialized"
+
+if !$?no_bcm && $?shadow \
+     "port il linkscan=on; \
+	  $echo rc: Interlaken Port mode initialized"
+
+# Selectively re-enable Auto Negotiation based on config port_force_an_list.
+#if $?port_force_an_list \
+#    "port $port_force_an_list autoneg=on"
+
+# No spanning tree is running, so put ports all in the forwarding state
+# stp support not available for shadow device.
+
+if !$?no_bcm && !$?shadow \
+	"stg stp 1 all forward"
+
+# Start counter task unless already started by "init bcm" above.
+if $?plisim "local dma false"
+if !$?plisim "local dma true"
+if $?device_eb_vli "local dma false"
+if $?no_bcm && !$?rcpu_only\
+	"counter Interval=1000 Pbm=all Dma=$dma; \
+	 $echo rc: Counter collection enabled"
+if $?rcpu_only \
+	"counter Interval=2000000 Pbm=all Dma=false; \
+	 $echo rc: Counter collection enabled"
+
+# Resynchronize the saved values kept by the 'show counter' command.
+if !$?simulator \
+    "counter sync"
+
+# By default, dump data of packets that go to CPU.
+if !$?testinit \
+	"pw report +raw"
+
+# Default LED processor program for various SDKs and reference designs.
+# Source code can be found in $SDK/led/examples.
+
+if !$?p48 "local ledcode '\
+ E0 28 60 7F 67 2F 67 6B 06 7F 80 D2 1A 74 01 12 \
+ 7E 85 05 D2 0F 71 19 52 00 12 7D 85 05 D2 1F 71 \
+ 23 52 00 12 7C 85 05 D2 05 71 2D 52 00 3A 68 32 \
+ 00 97 75 3B 12 A0 FE 7F 02 0A 50 32 01 97 75 47 \
+ 12 BA FE 7F 02 0A 50 12 BA FE 7F 95 75 59 85 12 \
+ A0 FE 7F 95 75 A8 85 77 9A 12 A0 FE 7F 95 75 63 \
+ 85 77 A1 16 7C DA 02 71 A1 77 A8 32 05 97 71 76 \
+ 06 7D D2 01 71 9A 06 7F 67 93 75 9A 32 02 97 71 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 7E D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5605.hex
+
+if $?p48 "local ledcode '\
+ E0 28 60 7F 67 43 67 3C 67 35 67 2F 06 7F 80 D2 \
+ 18 74 01 28 60 7F 67 9B 67 89 67 BF 67 83 67 3C \
+ 67 73 67 68 67 5D 06 7F 80 D2 1A 74 13 3A 70 67 \
+ AD 71 C3 77 BF 32 03 97 71 C3 77 BF 32 05 97 71 \
+ C3 77 BF 12 BA FE 7F 32 01 97 75 4F 02 06 50 32 \
+ 00 97 75 57 02 06 50 95 75 C3 85 77 BF 67 AD 75 \
+ BF 32 04 97 71 C3 77 BF 67 AD 75 BF 32 03 97 71 \
+ C3 77 BF 67 AD 75 BF 32 03 97 71 BF 32 04 97 71 \
+ BF 77 C3 67 B6 71 C3 77 BF 12 A0 FE 7F 32 00 97 \
+ 75 95 02 06 50 95 75 C3 85 77 BF 12 BA FE 7F 32 \
+ 01 97 75 A7 02 06 50 95 75 C3 85 77 BF 06 7F 12 \
+ 80 F8 15 1A 00 57 06 7F 12 80 F8 15 1A 07 57 32 \
+ 0F 87 57 32 0E 87 57'"					# p48.hex
+
+if $?herc && !$?black_knight "local ledcode '\
+ 02 01 67 36 29 32 08 D7 87 32 07 D7 87 32 01 D7 \
+ 87 32 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 \
+ 74 24 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 \
+ 87 91 74 2D 3A 28 10 DA 07 75 3E FA 02 57 EA 06 \
+ 57'"							# sdk5670.hex
+
+if $?herc && $?black_knight "local ledcode '\
+ 2A 03 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 00 \
+ D7 87 2A 06 32 08 D7 87 32 07 D7 87 32 01 D7 87 \
+ 32 00 D7 87 3A 08'"					# knigget.hex
+
+if $?drac_any "local ledcode '\
+ E0 28 60 C3 67 4E 67 8A 06 C3 80 D2 0C 74 01 28 \
+ 60 C3 32 00 D7 87 32 01 D7 87 32 07 D7 87 32 08 \
+ D7 87 32 0F 87 32 0F 87 32 0F 87 32 0F 87 12 C2 \
+ 85 05 D2 0F 71 38 52 00 12 C1 85 05 D2 1F 71 42 \
+ 52 00 12 C0 85 05 D2 05 71 4C 52 00 3A 38 32 00 \
+ 97 75 5A 12 A0 FE C3 02 0A 50 32 01 97 75 66 12 \
+ AD FE C3 02 0A 50 12 AD FE C3 95 75 78 85 12 A0 \
+ FE C3 95 75 C0 85 77 B9 12 A0 FE C3 95 75 82 85 \
+ 77 C7 16 C0 DA 02 71 C7 77 C0 32 05 97 71 9A 32 \
+ 02 97 71 B9 06 C1 D2 01 71 B9 06 C3 67 B2 75 B9 \
+ 32 03 97 71 C0 32 04 97 75 C7 06 C2 D2 07 71 C7 \
+ 77 C0 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# sdk5690.hex
+
+if $?draco_k12 "local ledcode '\
+ 02 0B A2 01 28 A2 01 60 C3 67 32 67 6E 06 C3 90 \
+ 75 02 12 C2 85 05 D2 0F 71 1C 52 00 12 C1 85 05 \
+ D2 1F 71 26 52 00 12 C0 85 05 D2 05 71 30 52 00 \
+ 3A 30 32 00 97 75 3E 12 A0 FE C3 02 0A 50 32 01 \
+ 97 75 4A 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 \
+ 5C 85 12 A0 FE C3 95 75 A6 85 77 9F 12 A0 FE C3 \
+ 95 75 66 85 77 AD 16 C0 DA 02 71 AD 77 A6 32 05 \
+ 97 71 7E 32 02 97 71 9F 06 C1 D2 01 71 9F 06 C3 \
+ 67 96 75 9F 32 03 97 71 A6 32 04 97 75 AD 06 C2 \
+ D2 07 71 AD 77 A6 12 80 A2 01 F8 15 1A 00 57 32 \
+ 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 \
+ 32 0E 87 57'"						# k12-5690.hex
+
+if $?herc && $?white_knight "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 07 \
+ D7 87 32 01 D7 87 32 00 D7 87 57'"			# wk5670.hex
+
+if $?herc && $?merlin "local ledcode '\
+ 2A 03 67 0A 2A 06 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"			# merlin5670.hex
+
+if $?herc && $?lancelot "local ledcode '\
+ 2A 05 67 12 2A 06 67 12 2A 03 67 12 2A 04 67 12 \
+ 3A 10 32 08 D7 87 32 00 D7 87 32 01 D7 87 32 07 \
+ D7 87 57'"						# lancelot.hex
+
+if $?xgs_fabric && $?guenevere "local ledcode '\
+ 2A 04 67 0A 2A 05 67 0A 3A 04 32 07 D7 87 32 00 \
+ 32 01 B7 D7 87 57'"                                    # guenevere5670.hex
+
+if $?drac_any && $?white_knight "local ledcode '\
+ E0 28 60 C3 67 2f 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"		# wk5690.hex
+
+if $?drac_any && $?merlin "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# merlin5690.hex
+
+if $?drac_any && $?galahad "local ledcode '\
+ E0 28 60 C3 67 2F 67 6B 06 C3 80 D2 0C 74 01 12 \
+ C2 85 05 D2 0F 71 19 52 00 12 C1 85 05 D2 1F 71 \
+ 23 52 00 12 C0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE C3 02 0A 50 32 01 97 75 47 \
+ 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 59 85 12 \
+ A0 FE C3 95 75 A8 85 77 9A 12 A0 FE C3 95 75 63 \
+ 85 77 A1 16 C0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 C1 D2 01 71 9A 06 C3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 C2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0F 87 32 0E 87 57 32 0E 87 32 0F 87 57'"		# galahad.hex
+
+if $?drac_any && $?lm "local ledcode '\
+E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+32 0F 87 57 32 0F 87 32 0E 87 57'"      # lm5690.hex
+
+if $?twolynx "local ledcode '\
+ 2A 01 67 0A 2A 00 67 0A 3A 08 32 08 D7 87 32 00 \
+ D7 87 32 01 D7 87 32 07 D7 87 57'"                 # twolynx.hex
+
+if $?lynx_any && $?herculynx || $?lynxalot || $?lm || $?guenevere \
+	"local ledcode '\
+12 C0 85 05 D2 03 71 0A 52 00 2A 00 67 10 3A 04 \
+32 08 D7 87 06 C0 D2 01 71 22 32 0F 87 32 0F 87 \
+77 2A 32 00 D7 87 32 01 D7 87 32 07 D7 87 57'"      # herculynx.hex
+
+if $?tucana && !$?magnum "local ledcode '\
+ E0 67 23 D2 18 74 01 02 20 67 23 D2 38 74 09 02 \
+ 18 67 23 D2 1C 74 11 E9 02 80 45 80 81 DA 0D 74 \
+ 1A 3A 68 28 60 E3 67 4A 67 36 06 E4 30 87 06 E5 \
+ 30 87 06 E3 80 57 32 00 97 71 45 32 01 97 71 45 \
+ 02 0F 60 E5 57 02 0E 60 E5 57 06 E3 12 A0 F8 15 \
+ 1A 00 75 59 02 0E 60 E4 57 02 0F 60 E4 57'"        # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC 67 5A 67 9C 06 FA 67 DA 06 FB 67 DA \
+ 06 FC 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0E 74 51 3A 70 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 D7 85 77 D1 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 D4 16 FF DA 02 02 FA 71 D4 77 D7 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 D1 06 FC 67 CA 02 FB 75 \
+ D1 32 02 97 71 D1 32 03 97 71 D7 32 04 97 75 D4 \
+ 06 FD D2 07 02 FB 71 D4 77 D7 12 A0 F8 15 1A 00 \
+ 57 42 00 57 42 01 57 42 02 57 D2 02 74 E3 32 0F \
+ 87 77 E6 32 0E 87 D2 01 74 EE 32 0F 87 57 32 0E \
+ 87 57'"                                            # sdk5665.hex
+
+if $?magnum && !$?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 75 09 A2 01 60 FC 28 67 37 67 73 \
+ 06 FB 80 D2 1C 74 01 12 FD 85 05 D2 0F 71 21 52 \
+ 00 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 3A 70 32 00 97 75 43 12 C0 FE FC \
+ 02 0A 50 32 01 97 75 4F 12 DC FE FC 02 0A 50 12 \
+ DC FE FC 95 75 61 85 12 C0 FE FC 95 75 B0 85 77 \
+ A2 12 C0 FE FC 95 75 6B 85 77 A9 16 FF DA 02 71 \
+ A9 77 B0 32 05 97 71 7E 06 FE D2 01 71 A2 06 FC \
+ 67 9B 75 A2 32 02 97 71 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 FD D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0F 87 32 0F 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57'"                            # magnum_sdk.hex
+
+if $?tuc24_ref && $?BCM5650_C0 "local ledcode '\
+ E0 60 FB D2 18 71 10 60 FC 28 67 D0 67 C0 77 19 \
+ A2 01 60 FC 28 67 40 67 7C 06 FB 80 D2 1C 74 01 \
+ 12 FD 85 05 D2 0F 71 2A 52 00 12 FE 85 05 D2 1F \
+ 71 34 52 00 12 FF 85 05 D2 05 71 3E 52 00 3A 68 \
+ 32 00 97 75 4C 12 C0 FE FC 02 0A 50 32 01 97 75 \
+ 58 12 DC FE FC 02 0A 50 12 DC FE FC 95 75 6A 85 \
+ 12 C0 FE FC 95 75 B9 85 77 AB 12 C0 FE FC 95 75 \
+ 74 85 77 B2 16 FF DA 02 71 B2 77 B9 32 05 97 71 \
+ 87 06 FE D2 01 71 AB 06 FC 67 A4 75 AB 32 02 97 \
+ 71 AB 32 03 97 71 B9 32 04 97 75 B2 06 FD D2 07 \
+ 71 B2 77 B9 12 A0 F8 15 1A 00 57 32 0F 87 32 0F \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 \
+ 02 0E 32 00 97 71 CD 32 01 97 71 CD 80 30 87 57 \
+ 06 FC 12 A0 F8 15 1A 00 02 0F 75 DD 90 30 87 57'"  # magnum.hex
+
+if $?tuc24_ref && !$?BCM5650_C0 "local ledcode '\
+ E0 28 60 FC D2 18 71 0E 67 E9 67 D9 77 1A 67 5A \
+ 67 9C 06 FA 67 D0 06 FB 67 D0 06 FC 80 D2 1C 74 \
+ 01 12 FE 85 05 D2 1F 71 2B 52 00 12 FF 85 05 D2 \
+ 05 71 35 52 00 E9 05 98 98 98 98 C2 0F 60 F9 05 \
+ 88 88 88 88 C2 F0 B6 F9 50 81 DA 0C 74 36 E9 02 \
+ 80 45 80 81 DA 0D 74 51 3A 68 32 00 97 75 66 12 \
+ C0 FE FC 02 0A 50 32 01 97 75 72 12 DC FE FC 02 \
+ 0A 50 12 DC FE FC 95 75 86 85 12 C0 FE FC 95 02 \
+ FA 75 CD 85 77 C7 12 C0 FE FC 95 75 92 85 02 FA \
+ 77 CA 16 FF DA 02 02 FA 71 CA 77 CD 32 05 97 71 \
+ A9 06 FE D2 01 02 FB 71 C7 06 FC 67 C0 02 FB 75 \
+ C7 32 02 97 71 C7 32 03 97 71 CD 32 04 97 75 CA \
+ 12 A0 F8 15 1A 00 57 42 FF 57 42 FE 57 42 EF 57 \
+ 30 87 98 98 98 98 30 87 57 02 0E 32 00 97 71 E6 \
+ 32 01 97 71 E6 80 30 87 57 06 FC 12 A0 F8 15 1A \
+ 00 02 0F 75 F6 90 30 87 57'"                       # tuc24_ref.hex
+
+if $?herc8_15 "local ledcode '\
+ 02 01 28 32 08 D7 87 32 07 D7 87 32 01 D7 87 32 \
+ 00 D7 87 80 D2 09 74 02 86 7F 06 7F C2 07 74 22 \
+ 86 7E 16 7E CA 07 E0 17 0D 12 08 98 27 D7 87 91 \
+ 74 2B 3A 28'"                                      # sdk5675.hex
+
+if $?drac_any && $?lm "local ledcode '\
+ E0 28 60 C3 67 2D 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 17 52 00 12 C1 85 05 D2 1F 71 21 52 \
+ 00 12 C0 85 05 D2 05 71 2B 52 00 3A 18 32 00 97 \
+ 75 39 12 A0 FE C3 02 0A 50 32 01 97 75 45 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 5F 85 12 A0 FE \
+ C3 95 71 5C 16 C0 DA 02 71 A6 77 B4 85 77 77 12 \
+ A0 FE C3 95 75 6F 85 16 C0 DA 02 71 A6 77 AD 16 \
+ C0 DA 02 71 AD 77 B4 32 05 97 71 82 06 C1 D2 01 \
+ 71 A6 06 C3 67 9F 75 A6 32 02 97 71 A6 32 03 97 \
+ 71 B4 32 04 97 75 AD 06 C2 D2 07 71 AD 77 B4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57 00 00 00 00 00'"  # lm5690.hex
+
+if $?drac_any && $?lm48p "local ledcode '\
+ E0 28 60 C3 67 7C 06 C3 80 28 60 C3 67 7C 67 40 \
+ 06 C3 90 28 60 C3 67 40 06 C3 80 80 D2 0C 74 01 \
+ 12 C2 85 05 D2 0F 71 2A 52 00 12 C1 85 05 D2 1F \
+ 71 34 52 00 12 C0 85 05 D2 05 71 3E 52 00 3A 30 \
+ 32 00 97 75 4C 12 A0 FE C3 02 0A 50 32 01 97 75 \
+ 58 12 AC FE C3 02 0A 50 12 AC FE C3 95 75 6A 85 \
+ 12 A0 FE C3 95 75 B9 85 77 AB 12 A0 FE C3 95 75 \
+ 74 85 77 B2 16 C0 DA 02 71 B2 77 B9 32 05 97 71 \
+ 8C 32 02 97 71 AB 06 C1 D2 01 71 AB 06 C3 67 A4 \
+ 75 AB 32 03 97 71 B9 32 04 97 75 B2 06 C2 D2 07 \
+ 71 B2 77 B9 12 80 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695.hex
+
+if $?drac_any && $?lm48p_B "local ledcode '\
+ E0 28 60 C3 67 79 06 C3 67 3D 06 C3 80 28 60 C3 \
+ 67 3D 06 C3 67 79 06 C3 80 D2 0C 74 01 12 C2 85 \
+ 05 D2 0F 71 27 52 00 12 C1 85 05 D2 1F 71 31 52 \
+ 00 12 C0 85 05 D2 05 71 3B 52 00 3A 30 32 00 97 \
+ 75 49 12 A0 FE C3 02 0A 50 32 01 97 75 55 12 AC \
+ FE C3 02 0A 50 12 AC FE C3 95 75 67 85 12 A0 FE \
+ C3 95 75 B6 85 77 A8 12 A0 FE C3 95 75 71 85 77 \
+ AF 16 C0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 C1 D2 01 71 A8 06 C3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 C2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'"  # lm48p5695_10.hex
+
+if $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 55 67 91 06 E3 80 28 60 E3 67 91 \
+ 67 55 06 E3 80 D2 18 74 01 28 60 E3 67 B9 75 26 \
+ 67 CE 67 55 77 2E 32 0E 87 32 08 87 67 C0 06 E3 \
+ 80 D2 1C 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 3A 70 32 00 97 75 61 12 A0 FE E3 02 0A \
+ 50 32 01 97 75 6D 12 BC FE E3 02 0A 50 12 BC FE \
+ E3 95 75 7F 85 12 A0 FE E3 95 75 CE 85 77 C0 12 \
+ A0 FE E3 95 75 89 85 77 C7 16 E0 DA 02 71 C7 77 \
+ CE 32 05 97 71 A1 32 02 97 71 C0 06 E1 D2 01 71 \
+ C0 06 E3 67 B9 75 C0 32 03 97 71 CE 32 04 97 75 \
+ C7 06 E2 D2 07 71 C7 77 CE 12 80 F8 15 1A 00 57 \
+ 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 32 0F \
+ 87 32 0E 87 57'"  # sdk56504.hex
+
+#Led program for new rev of FB SDK and Ref design
+if $?firebolt_any && !$?fb24 "local ledcode '\
+ E0 28 60 E3 67 4B 67 87 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AF 75 1C 67 C4 67 4B 77 24 32 0E 87 32 \
+ 08 87 67 B6 06 E3 80 D2 1C 74 0F 12 E2 85 05 D2 \
+ 0F 71 35 52 00 12 E1 85 05 D2 1F 71 3F 52 00 12 \
+ E0 85 05 D2 05 71 49 52 00 3A 70 32 00 97 75 57 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 63 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 75 85 12 A0 FE E3 95 \
+ 75 C4 85 77 B6 12 A0 FE E3 95 75 7F 85 77 BD 16 \
+ E0 DA 02 71 BD 77 C4 32 05 97 71 97 32 02 97 71 \
+ B6 06 E1 D2 01 71 B6 06 E3 67 AF 75 B6 32 03 97 \
+ 71 C4 32 04 97 75 BD 06 E2 D2 07 71 BD 77 C4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56504ref.hex
+
+#Override Default Firebolt LED program for Line Module
+if $?lm && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 79 06 E3 67 3D 06 E3 80 28 60 E3 \
+ 67 3D 06 E3 67 79 06 E3 80 D2 18 74 01 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 60 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B6 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AF 16 E0 DA 02 71 AF 77 B6 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B6 32 04 97 75 AF 06 E2 D2 07 71 AF 77 \
+ B6 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 \
+ 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # lm48p56504.hex
+
+#Override Default Firebolt LED program for Line Module -50 version
+if $?lm && $?lm48p_D && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 6D 06 E3 67 31 06 E3 80 D2 18 74 \
+ 01 12 E2 85 05 D2 0F 71 1B 52 00 12 E1 85 05 D2 \
+ 1F 71 25 52 00 12 E0 85 05 D2 05 71 2F 52 00 3A \
+ 60 32 00 97 75 3D 12 A0 FE E3 02 0A 50 32 01 97 \
+ 75 49 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 5B \
+ 85 12 A0 FE E3 95 75 AA 85 77 9C 12 A0 FE E3 95 \
+ 75 65 85 77 A3 16 E0 DA 02 71 A3 77 AA 32 05 97 \
+ 71 7D 32 02 97 71 9C 06 E1 D2 01 71 9C 06 E3 67 \
+ 95 75 9C 32 03 97 71 AA 32 04 97 75 A3 06 E2 D2 \
+ 07 71 A3 77 AA 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'" # lm48p56504_50.hex
+
+if $?lm && $?firebolt_10x4 "local ledcode '\
+ 02 18 28 32 07 67 1E 75 0A D7 87 32 01 D7 87 32 \
+ 00 D7 87 32 08 D7 87 80 D2 1C 74 02 3A 0C 12 80 \
+ F8 15 1A 00 57 '" # lm12pcx456501.hex
+
+if $?fbpoe && $?firebolt_any "local ledcode '\
+ E0 28 60 E3 67 85 67 49 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 AD 75 1A 67 C2 77 20 32 0E 87 32 08 87 \
+ 67 49 06 E3 80 D2 1A 74 0F 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 32 00 97 75 55 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 61 12 BA FE E3 02 0A \
+ 50 12 BA FE E3 95 75 73 85 12 A0 FE E3 95 75 C2 \
+ 85 77 B4 12 A0 FE E3 95 75 7D 85 77 BB 16 E0 DA \
+ 02 71 BB 77 C2 32 05 97 71 95 32 02 97 71 B4 06 \
+ E1 D2 01 71 B4 06 E3 67 AD 75 B4 32 03 97 71 C2 \
+ 32 04 97 75 BB 06 E2 D2 07 71 BB 77 C2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'" # poe48p56504.hex
+
+#Override Default Firebolt LED program for felix
+if $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0E 87 32 0F 87 57'"  # sdk56102.hex
+
+#Override Default Felix LED program for felix48
+if $?felix48 && $?felix || $?felix15 "local ledcode '\
+ E0 28 60 E3 67 6B 67 A7 06 E3 80 D2 18 74 01 02 \
+ 18 28 60 E3 67 49 02 19 28 60 E3 67 49 32 0E 87 \
+ 32 0E 87 32 0E 87 32 0E 87 12 E2 85 05 D2 0F 71 \
+ 33 52 00 12 E1 85 05 D2 1F 71 3D 52 00 12 E0 85 \
+ 05 D2 05 71 47 52 00 3A 68 67 CF 75 52 32 0E 87 \
+ 77 55 32 0F 87 32 00 97 75 5E 32 0E 87 57 32 01 \
+ 97 75 67 32 0E 87 57 32 0F 87 57 32 00 97 75 77 \
+ 12 A0 FE E3 02 0A 50 32 01 97 75 83 12 BC FE E3 \
+ 02 0A 50 12 BC FE E3 95 75 95 85 12 A0 FE E3 95 \
+ 75 E4 85 77 D6 12 A0 FE E3 95 75 9F 85 77 DD 16 \
+ E0 DA 02 71 DD 77 E4 32 05 97 71 B7 32 02 97 71 \
+ D6 06 E1 D2 01 71 D6 06 E3 67 CF 75 D6 32 03 97 \
+ 71 E4 32 04 97 75 DD 06 E2 D2 07 71 DD 77 E4 12 \
+ 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 \
+ 32 0F 87 57 32 0F 87 32 0E 87 57'"  # felix48.hex
+
+if $?easyrider_any "local ledcode '\
+ E0 28 60 E3 67 59 67 95 06 E3 80 28 60 E3 67 95 \
+ 67 59 06 E3 80 D2 0C 74 01 28 60 E3 67 BD 75 26 \
+ 67 D2 67 59 77 2E 32 0E 87 32 08 87 67 C4 06 E3 \
+ 80 D2 0D 74 19 12 E2 85 05 D2 0F 71 3F 52 00 12 \
+ E1 85 05 D2 1F 71 49 52 00 12 E0 85 05 D2 05 71 \
+ 53 52 00 67 C4 67 C4 3A 38 32 00 97 75 65 12 A0 \
+ FE E3 02 0A 50 32 01 97 75 71 12 AD FE E3 02 0A \
+ 50 12 AD FE E3 95 75 83 85 12 A0 FE E3 95 75 D2 \
+ 85 77 C4 12 A0 FE E3 95 75 8D 85 77 CB 16 E0 DA \
+ 02 71 CB 77 D2 32 05 97 71 A5 32 02 97 71 C4 06 \
+ E1 D2 01 71 C4 06 E3 67 BD 75 C4 32 03 97 71 D2 \
+ 32 04 97 75 CB 06 E2 D2 07 71 CB 77 D2 12 80 F8 \
+ 15 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F \
+ 87 57 32 0F 87 32 0E 87 57'"   # sdk56601.hex
+
+#Override Default Easyrider LED program for 56602
+if $?easyrider_1x1 "local ledcode '\
+ E0 60 E1 67 7C 67 7C 06 E1 80 D2 0C 74 01 02 0C \
+ 28 60 E1 67 75 75 1D 67 8A 67 39 77 25 32 0E 87 \
+ 32 08 87 67 7C 06 E1 D2 00 02 00 74 10 12 E0 85 \
+ 05 D2 05 71 37 52 00 3A 38 32 00 97 75 45 12 A0 \
+ FE E1 02 0A 50 32 01 97 75 51 12 AD FE E1 02 0A \
+ 50 12 AD FE E1 95 75 63 85 12 A0 FE E1 95 75 8A \
+ 85 77 7C 12 A0 FE E1 95 75 6D 85 77 83 16 E0 DA \
+ 02 71 83 77 8A 12 80 F8 15 1A 00 57 32 0E 87 32 \
+ 0E 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 \
+ 57'"   # sdk56602.hex
+
+#Override Default  LED program for 53300
+if $?mirage24 "local ledcode '\
+ E0 28 60 E3 67 6B 67 2F 06 E3 80 D2 18 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 30 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 BC FE E3 02 0A 50 12 BC FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A2 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 9E 16 E0 DA 02 71 9E 77 A2 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A2 32 04 97 75 9E 06 E2 D2 07 71 \
+ 9E 77 A2 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E \
+ 87 57 32 0E 87 57'"  # sdk53300.hex
+
+#Override Default LED program for 56314
+if $?bcm56314p24ref "local ledcode '\
+ E0 28 60 E3 67 79 67 3D 06 E3 80 D2 18 74 01 28 \
+ 60 E3 67 79 67 A8 06 E3 80 D2 1C 74 0F 12 E2 85 \
+ 05 D2 0F 71 27 52 00 12 E1 85 05 D2 1F 71 31 52 \
+ 00 12 E0 85 05 D2 05 71 3B 52 00 3A 38 32 00 97 \
+ 75 49 12 A0 FE E3 02 0A 50 32 01 97 75 55 12 BC \
+ FE E3 02 0A 50 12 BC FE E3 95 75 67 85 12 A0 FE \
+ E3 95 75 B0 85 77 A8 12 A0 FE E3 95 75 71 85 77 \
+ AC 16 E0 DA 02 71 AC 77 B0 32 05 97 71 89 32 02 \
+ 97 71 A8 06 E1 D2 01 71 A8 06 E3 67 A1 75 A8 32 \
+ 03 97 71 B0 32 04 97 75 AC 06 E2 D2 07 71 AC 77 \
+ B0 12 80 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ 32 0E 87 57'"  # bcm956314p24ref.hex
+
+if $?bradley "local ledcode '\
+ E0 28 60 F2 67 1B 06 F2 80 D2 14 74 01 86 F3 12 \
+ F0 85 05 D2 05 71 19 52 00 3A 28 32 00 97 75 27 \
+ 12 A8 FE F2 02 0A 50 32 01 97 75 33 12 BC FE F2 \
+ 02 0A 50 12 BC FE F2 95 75 45 85 12 A8 FE F2 95 \
+ 75 91 85 77 57 12 A8 FE F2 95 75 4F 85 77 8A 16 \
+ F0 DA 02 71 8A 77 91 06 F2 12 94 F8 15 02 02 C1 \
+ 74 6E 02 04 C1 74 6E 02 08 C1 74 6E 77 74 C6 F3 \
+ 74 91 77 8A 06 F2 67 7C 75 83 77 91 12 80 F8 15 \
+ 1A 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 \
+ 57 32 0F 87 32 0E 87 57'"     # sdk56800.hex
+
+if $?humv "local ledcode '\
+ E0 28 60 F2 67 21 06 F2 80 D2 08 74 0F F2 02 D2 \
+ 12 74 01 86 F3 12 F0 85 05 D2 05 71 1F 52 00 3A \
+ 20 32 00 97 75 2D 12 A8 FE F2 02 0A 50 32 01 97 \
+ 75 39 12 BA FE F2 02 0A 50 12 BA FE F2 95 75 4B \
+ 85 12 A8 FE F2 95 75 97 85 77 5D 12 A8 FE F2 95 \
+ 75 55 85 77 90 16 F0 DA 02 71 90 77 97 06 F2 12 \
+ 94 F8 15 02 02 C1 74 74 02 04 C1 74 74 02 08 C1 \
+ 74 74 77 7A C6 F3 74 97 77 90 06 F2 67 82 75 89 \
+ 77 97 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" # sdk56700.hex
+
+if $?bradley_1g "local ledcode '\
+ E0 28 60 E3 67 2F 67 6B 06 E3 80 D2 14 74 01 12 \
+ E2 85 05 D2 0F 71 19 52 00 12 E1 85 05 D2 1F 71 \
+ 23 52 00 12 E0 85 05 D2 05 71 2D 52 00 3A 50 32 \
+ 00 97 75 3B 12 A0 FE E3 02 0A 50 32 01 97 75 47 \
+ 12 B4 FE E3 02 0A 50 12 B4 FE E3 95 75 59 85 12 \
+ A0 FE E3 95 75 A8 85 77 9A 12 A0 FE E3 95 75 63 \
+ 85 77 A1 16 E0 DA 02 71 A1 77 A8 32 05 97 71 7B \
+ 32 02 97 71 9A 06 E1 D2 01 71 9A 06 E3 67 93 75 \
+ 9A 32 03 97 71 A8 32 04 97 75 A1 06 E2 D2 07 71 \
+ A1 77 A8 12 80 F8 15 1A 00 57 32 0E 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57 '"  # sdk56800c.hex
+
+if $?goldwing "local ledcode '\
+ E0 28 60 F3 D2 10 75 0E 67 3B 67 94 77 12 67 94 \
+ 67 3B 06 F3 80 D2 14 74 01 86 F4 12 F2 85 05 D2 \
+ 0F 71 25 52 00 12 F1 85 05 D2 1F 71 2F 52 00 12 \
+ F0 85 05 D2 05 71 39 52 00 3A 50 32 00 97 75 47 \
+ 12 A8 FE F3 02 0A 50 32 01 97 75 53 12 BC FE F3 \
+ 02 0A 50 12 BC FE F3 95 75 65 85 12 A8 FE F3 95 \
+ 75 C0 85 77 77 12 A8 FE F3 95 75 6F 85 77 B9 16 \
+ F0 DA 02 71 B9 77 C0 06 F3 12 94 F8 15 02 02 C1 \
+ 74 8E 02 04 C1 74 8E 02 08 C1 74 8E 77 B2 C6 F4 \
+ 74 C0 77 B9 06 F3 67 AB 75 B2 32 04 75 B2 32 03 \
+ 97 71 C0 06 F2 D2 07 71 B9 77 C0 12 80 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 '"                          # sdk56580.hex
+
+if $?humv && $?lm "local ledcode '\
+ 02 04 28 D2 08 74 0A F2 02 28 32 07 67 29 75 11 \
+ D7 87 60 E4 67 30 06 E4 60 E4 67 4C 06 E4 32 08 \
+ D7 87 80 D2 12 74 02 3A 30 12 80 F8 15 1A 00 57 \
+ 06 E4 12 94 F8 15 02 10 C1 70 42 12 D2 FE E4 02 \
+ 0A 50 12 D2 FE E4 95 75 6D 85 77 68 06 E4 12 94 \
+ F8 15 02 20 C1 70 5E 12 C0 FE E4 02 0A 50 12 C0 \
+ FE E4 95 75 6D 85 77 68 32 0E D7 87 57 32 0F D7 \
+ 87 57 '"                                         # lm12p56802.hex
+
+
+if $?raptor "local ledcode '\
+ 02 06 28 60 FF 67 64 67 93 06 FF 80 D2 36 74 02 \
+ 02 04 28 60 FF 67 BB 75 1E 32 0E 87 77 21 32 0F \
+ 87 67 7D 06 FF 80 D2 06 74 12 02 01 28 60 FF 67 \
+ BB 75 38 32 0E 87 77 3B 32 0F 87 67 7D 06 FF 80 \
+ D2 03 74 2C 12 FE 85 05 D2 0F 71 4E 52 00 12 FD \
+ 85 05 D2 1F 71 58 52 00 12 FC 85 05 D2 05 71 62 \
+ 52 00 3A C8 32 01 97 75 76 32 00 97 75 C9 16 FC \
+ DA 02 71 C9 77 D0 32 00 97 75 C2 77 D0 32 00 97 \
+ 75 86 32 0E 87 57 32 01 97 75 8F 32 0E 87 57 32 \
+ 0F 87 57 32 05 97 71 A3 32 02 97 71 C2 06 FD D2 \
+ 01 71 C2 06 FF 67 BB 75 C2 32 03 97 71 D0 32 04 \
+ 97 75 C9 06 FE D2 07 71 C9 77 D0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" # sdk56018.hex
+
+if $?raptor && $?rap24_ref "local ledcode '\
+ 02 06 60 E1 67 48 67 31 06 E1 80 D2 1E 71 02 02 \
+ 05 60 E1 67 48 67 31 06 E1 90 D2 03 74 11 02 02 \
+ 60 E1 67 48 67 31 06 E1 90 D2 00 74 20 86 E0 3A \
+ 38 06 E1 67 50 75 57 28 32 00 32 01 B7 97 75 57 \
+ 16 E0 CA 05 74 5B 77 57 06 E1 67 50 75 57 77 5B \
+ 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00'" # sdk56214.hex
+
+if $?raven_eb_48p "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 71 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024p48ref.hex
+
+if $?BCM956024R50T "local ledcode '\
+ 02 06 28 60 C3 67 30 67 6C 06 C3 80 D2 1E 74 02 \
+ 12 C2 85 05 D2 0F 71 1A 52 00 12 C1 85 05 D2 1F \
+ 71 24 52 00 12 C0 85 05 D2 05 71 2E 52 00 3A 60 \
+ 32 00 97 75 3C 12 C0 FE C3 02 0A 50 32 01 97 75 \
+ 48 12 E0 FE C3 02 0A 50 12 E0 FE C3 95 75 5A 85 \
+ 12 C0 FE C3 95 75 A9 85 77 9B 12 C0 FE C3 95 75 \
+ 64 85 77 A2 16 C0 DA 02 71 A2 77 A9 32 05 97 75 \
+ 7C 32 02 97 71 9B 06 C1 D2 01 71 9B 06 C3 67 94 \
+ 75 9B 32 03 97 71 A9 32 04 97 75 A2 06 C2 D2 07 \
+ 71 A2 77 A9 12 A0 F8 15 1A 00 57 32 0E 87 32 0E \
+ 87 57 32 0E 87 32 0F 87 57 32 0F 87 32 0E 87 57'" #bcm956024r50t.hex
+
+if $?scorpion || $?conqueror "local ledcode '\
+ 02 18 28 60 E1 67 12 06 E1 90 D2 00 74 02 86 E0 \
+ 3A 18 67 2D 75 34 28 32 00 32 01 B7 97 75 38 16 \
+ E0 CA 05 74 38 77 34 67 2D 75 34 77 38 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 \
+ 00 00 00'" #sdk56820.hex
+
+if $?scorpion && $?BCM956820R24XG "local ledcode '\
+ 02 01 28 67 D0 02 02 28 67 D6 67 D0 02 01 28 67 \
+ D6 02 04 28 67 D0 02 03 28 67 D6 67 D0 02 04 28 \
+ 67 D6 02 05 28 67 D0 02 06 28 67 D6 67 D0 02 05 \
+ 28 67 D6 02 07 28 67 D0 02 08 28 67 D6 67 D0 02 \
+ 07 28 67 D6 02 09 28 67 D0 02 0A 28 67 D6 67 D0 \
+ 02 09 28 67 D6 02 0C 28 67 D0 02 0B 28 67 D6 67 \
+ D0 02 0C 28 67 D6 02 0D 28 67 D0 02 0E 28 67 D6 \
+ 67 D0 02 0D 28 67 D6 02 0F 28 67 D0 02 10 28 67 \
+ D6 67 D0 02 0F 28 67 D6 02 11 28 67 D0 02 12 28 \
+ 67 D6 67 D0 02 11 28 67 D6 02 14 28 67 D0 02 13 \
+ 28 67 D6 67 D0 02 14 28 67 D6 02 15 28 67 D0 02 \
+ 16 28 67 D6 67 D0 02 15 28 67 D6 02 17 28 67 D0 \
+ 02 18 28 67 D6 67 D0 02 17 28 67 D6 86 E0 3A 30 \
+ 67 F1 75 F8 77 FC 67 F1 75 F8 28 32 00 32 01 B7 \
+ 97 75 F8 16 E0 CA 05 74 FC 77 F8 67 F1 75 F8 77 \
+ FC 12 A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 \
+ '" #bcm956820r24xg.hex
+
+if $?valkyrie "local ledcode '\
+ 02 02 67 A9 67 94 02 03 67 A9 67 94 02 05 67 A9 \
+ 67 94 02 04 67 A9 67 94 02 06 67 A9 67 94 02 07 \
+ 67 A9 67 94 02 12 67 A9 67 94 02 13 67 A9 67 94 \
+ 02 0E 67 A9 67 94 02 0F 67 A9 67 94 02 11 67 A9 \
+ 67 94 02 10 67 A9 67 94 02 1A 67 A9 67 94 02 20 \
+ 67 A9 67 94 02 21 67 A9 67 94 02 22 67 A9 67 94 \
+ 02 23 67 A9 67 94 02 24 67 A9 67 94 02 2F 67 A9 \
+ 67 94 02 2E 67 A9 67 94 02 1B 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56680.hex
+
+if $?valkyrie2 "local ledcode '\
+ 02 1E 67 A9 67 94 02 1F 67 A9 67 94 02 21 67 A9 \
+ 67 94 02 20 67 A9 67 94 02 22 67 A9 67 94 02 23 \
+ 67 A9 67 94 02 24 67 A9 67 94 02 25 67 A9 67 94 \
+ 02 26 67 A9 67 94 02 27 67 A9 67 94 02 29 67 A9 \
+ 67 94 02 28 67 A9 67 94 02 2A 67 A9 67 94 02 2B \
+ 67 A9 67 94 02 2C 67 A9 67 94 02 2D 67 A9 67 94 \
+ 02 2E 67 A9 67 94 02 2F 67 A9 67 94 02 31 67 A9 \
+ 67 94 02 30 67 A9 67 94 02 32 67 A9 67 94 02 33 \
+ 67 A9 67 94 02 34 67 A9 67 94 02 35 67 A9 67 94 \
+ 86 E0 3A 30 67 AF 75 B6 28 32 00 32 01 B7 97 75 \
+ B6 16 E0 CA 05 74 BA 77 B6 67 AF 75 B6 77 BA 12 \
+ A0 F8 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 \
+ 00'" #sdk56685.hex
+
+if $?hawkeye_p24 "local ledcode '\
+ 02 01 28 60 E3 67 43 67 1C 06 E3 80 D2 19 74 02 \
+ 12 E0 85 05 D2 03 71 1A 52 00 3A 60 32 00 32 01 \
+ B7 97 75 2B 12 E4 FE E3 02 01 50 12 E4 FE E3 95 \
+ 75 3B 85 06 E3 67 55 75 6A 77 5C 16 E0 DA 01 71 \
+ 6A 77 5C 06 E3 67 55 75 6A 32 03 97 71 5C 32 04 \
+ 97 75 6A 77 63 12 A0 F8 15 1A 00 57 32 0E 87 32 \
+ 0F 87 57 32 0F 87 32 0E 87 57 32 0F 87 32 0F 87 \
+ 57'"  #bcm953314p24ref.hex
+
+if $?hawkeye_k24 "local ledcode '\
+ 02 01 28 60 E1 67 3D 67 1C 06 E1 80 D2 19 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 30 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 50 16 E0 DA 02 71 4C 77 50 06 E1 67 \
+ 45 75 50 77 4C 12 A0 F8 15 1A 00 57 32 0E 87 57 \
+ 32 0F 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #bcm953314k24.hex
+
+if !"expr $pcidev + 0 == 0xb624" "local ledcode '\
+ 02 1C 28 67 18 02 1D 28 67 18 02 1E 28 67 18 02 \
+ 1F 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56624.hex
+
+if !"expr $pcidev + 0 == 0xb626" "local ledcode '\
+ 02 1A 28 67 22 02 1B 28 67 22 02 1C 28 67 22 02 \
+ 1D 28 67 22 02 1E 28 67 22 02 1F 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56626.hex
+
+if !"expr $pcidev + 0 == 0xb628" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56628.hex
+
+if !"expr $pcidev + 0 == 0xb629" "local ledcode '\
+ 02 02 28 67 2C 02 0E 28 67 2C 02 1A 28 67 2C 02 \
+ 1B 28 67 2C 02 1C 28 67 2C 02 1D 28 67 2C 02 1E \
+ 28 67 2C 02 1F 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56629.hex
+
+if !"expr $pcidev + 0 == 0xb634" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb630" "local ledcode '\
+ 02 1A 28 67 18 02 1B 28 67 18 02 1C 28 67 18 02 \
+ 1D 28 67 18 86 E0 3A 08 67 3B 75 20 67 46 77 24 \
+ 67 42 77 42 28 32 00 32 01 B7 97 75 42 16 E0 CA \
+ 05 74 46 77 42 67 3B 75 42 77 46 12 A0 F8 15 1A \
+ 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00 00 00'" #sdk56634.hex
+
+if !"expr $pcidev + 0 == 0xb636" "local ledcode '\
+ 02 2A 28 67 22 02 32 28 67 22 02 1A 28 67 22 02 \
+ 1B 28 67 22 02 1C 28 67 22 02 1D 28 67 22 86 E0 \
+ 3A 08 67 3D 75 44 28 32 00 32 01 B7 97 75 48 16 \
+ E0 CA 05 74 48 77 44 67 3D 75 44 77 48 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 00 00 00 00'" #sdk56636.hex
+
+if !"expr $pcidev + 0 == 0xb638" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56638.hex
+
+if !"expr $pcidev + 0 == 0xb639" "local ledcode '\
+ 02 1E 28 67 2C 02 26 28 67 2C 02 2A 28 67 2C 02 \
+ 32 28 67 2C 02 1A 28 67 2C 02 1B 28 67 2C 02 1C \
+ 28 67 2C 02 1D 28 67 2C 86 E0 3A 08 67 47 75 4E \
+ 28 32 00 32 01 B7 97 75 52 16 E0 CA 05 74 52 77 \
+ 4E 67 47 75 4E 77 52 12 A0 F8 15 1A 00 57 32 0F \
+ 87 57 32 0E 87 57 00 00 00 00 00 00 00 00 00 00'" #sdk56639.hex
+
+if !"expr $pcidev + 0 == 0xb334" "local ledcode '\
+ 02 02 28 60 E1 67 3D 67 1C 06 E1 80 D2 1E 74 02 \
+ 12 E0 85 05 D2 05 71 1A 52 00 3A 38 32 00 32 01 \
+ B7 97 75 2B 12 E2 FE E1 02 0A 50 12 E2 FE E1 95 \
+ 75 35 85 77 4C 16 E0 DA 02 71 50 77 4C 06 E1 67 \
+ 45 75 4C 77 50 12 A0 F8 15 1A 00 57 32 0F 87 57 \
+ 32 0E 87 57 00 00 00 00 00 00 00 00 00 00 00 00'" #sdk56334.hex
+
+if $?apollo "local ledcode '\
+ 02 1E 28 60 E0 67 58 67 73 06 E0 80 28 60 E0 67 \
+ 73 67 58 06 E0 80 D2 36 74 02 02 1A 28 60 E0 67 \
+ 9B 75 29 67 B0 67 58 77 31 32 0E 87 32 08 87 67 \
+ A2 06 E0 80 D2 1E 74 1C 12 E2 85 05 D2 0F 71 42 \
+ 52 00 12 E1 85 05 D2 1F 71 4C 52 00 12 E3 85 05 \
+ D2 05 71 56 52 00 3A 70 32 00 97 75 64 32 01 97 \
+ 71 6B 77 B0 32 01 97 71 A9 77 A2 16 E3 DA 02 71 \
+ A9 77 B0 32 05 97 75 83 32 02 97 71 A2 06 E1 D2 \
+ 01 71 A2 06 E0 67 9B 75 A2 32 03 97 71 B0 32 04 \
+ 97 75 A9 06 E2 D2 07 71 A9 77 B0 12 A0 F8 15 1A \
+ 00 57 32 0E 87 32 0E 87 57 32 0E 87 32 0F 87 57 \
+ 32 0F 87 32 0E 87 57 00 00 00 00 00 00 00 00 00'" #sdk56524.hex
+
+if $?tomahawk || $?tomahawk_plus "local ledcode '\
+ 02 00 28 60 E1 67 25 67 14 06 E1 80 D2 40 74 02 \
+ 86 E0 3A FC 28 32 00 32 01 B7 97 75 37 16 E0 CA \
+ 05 74 3E 77 37 67 2B 75 37 77 45 12 A0 F8 15 1A \
+ 00 57 28 32 07 97 57 32 0E 87 32 0E 87 57 32 0F \
+ 87 32 0E 87 57 32 0E 87 32 0F 87 57 00 00 00 00'" #sdk56960.hex
+
+if $?trident2plus "local ledcode '\
+ 02 01 28 60 E1 67 31 67 20 06 E1 80 D2 31 74 02 \
+ 86 E0 3A C0 67 37 75 1C 67 51 77 20 67 43 77 43 \
+ 28 32 00 32 01 B7 97 75 43 16 E0 CA 05 74 4A 77 \
+ 43 67 37 75 43 77 51 12 A0 F8 15 1A 00 57 28 32 \
+ 07 97 57 32 0E 87 32 0E 87 57 32 0F 87 32 0E 87 \
+ 57 32 0E 87 32 0F 87 57 00 00 00 00 00 00 00 00'" #sdk56860.hex
+
+if $?apache "local ledcode '\
+ 02 00 67 24 67 0F 80 D2 24 74 02 86 E0 3A F8 67 \
+ 34 75 16 77 1D 57 67 3C 75 62 77 44 57 67 3C 75 \
+ 4E 77 58 57 67 2C 75 62 77 70 07 57 07 12 A0 F8 \
+ 15 1A 00 57 07 12 A0 F8 15 1A 04 57 07 12 A0 F8 \
+ 15 1A 05 57 16 E0 CA 1E 74 69 77 62 07 57 16 E0 \
+ CA 1E 74 70 77 62 07 57 16 E0 CA 1E 74 69 77 70 \
+ 07 57 32 0E 87 32 0E 87 57 32 0F 87 32 0E 87 57 \
+ 32 0E 87 32 0F 87 57 00 00 00 00 00 00 00 00 00'" #sdk56560.hex
+
+if $?generic8led "local ledcode '\
+ 06 E1 D2 40 71 11 E0 60 E1 16 E3 DA 01 71 15 60 \
+ E3 67 5D 75 2B 12 01 61 E3 67 71 28 67 32 86 E0 \
+ 16 E2 81 61 E2 DA 1E 75 2B 3A 08 E9 61 E2 86 E1 \
+ 77 00 67 5D 75 38 77 3C 67 64 77 64 67 41 67 4F \
+ 57 28 32 01 97 75 64 16 E0 CA 05 74 68 77 64 28 \
+ 32 00 97 75 64 16 E0 CA 05 74 68 77 64 12 A0 F8 \
+ 15 1A 00 57 32 0F 87 57 32 0E 87 57 09 75 64 77 \
+ 68 12 05 67 6C 12 04 67 6C 12 03 67 6C 12 02 67 \
+ 6C 12 01 67 6C 12 00 67 6C 57 00 00 00 00 00 00'" #generic8led.hex
+
+# Download LED code into LED processor and enable (if applicable).
+
+if $?feature_led_proc && $?ledcode && !$?simulator \
+	"led prog $ledcode; \
+	 led auto on; led start"
+
+# Setup Greyhound LED processor
+if $?greyhound \
+    "rcload gh_ledup.soc"
+
+# Setup Hurricane3 LED processor
+if $?hurricane3 \
+    "rcload hr3_led.soc"
+
+# Setup Tomahawk LED processor
+if $?tomahawk && !$?simulator \
+    "led 1 prog $ledcode; \
+     led 1 auto on; led 1 start; \
+     led 2 prog $ledcode; \
+     led 2 auto on; led 2 start"
+
+# Setup Tomahawk+ LED processor
+if $?tomahawk_plus && !$?simulator \
+    "led 1 prog $ledcode; \
+     led 1 auto on; led 1 start; \
+     led 2 prog $ledcode; \
+     led 2 auto on; led 2 start"
+
+# If loading multiple rc.soc, upon loading the last unit, restart
+# all LED processors so any common blinking is in sync.
+
+if !"expr $?feature_led_proc && !$?simulator && $unit == $units - 1" \
+	"*:led stop; *:led start"
+
+# Run counter DMA task 4 times per second to achieve better
+# ctr_xaui_activity.
+if $?bradley_any \
+        "ctr interval=250000"
+
+# Initialize Hercules UC modid 0 entry to point to the CPU
+if $?herc_any \
+	"w uc 0 1 1"
+
+# Additional configuration for 48-port in Stacking mode.
+# On the 48-port platform, rc.soc is run twice; once on unit 0 and
+# then once on unit 1.  The turbo port on unit N is geN.
+# All turbo port traffic must be tagged; see vlan add below.
+# See $SDK/doc/48-port.txt for more information including how
+# to configure IPG values for line rate operation.
+
+if $?p48 && $?unit0 \
+	"local turbo_port 0; local my_modid 1;"
+
+if $?p48 && $?unit1 \
+	"local turbo_port 1; local my_modid 2;"
+
+if $?p48 \
+	"m config st_is_mirr=0 st_module=1 st_mcnt=1 st_simplex=0 st_link=0; \
+	 m config.g$turbo_port st_link=1; \
+	 m gmacc2.ge$turbo_port ipgt=8 mclkfq=1; \
+	 m fe_maxf maxfr=1560; \
+	 m maxfr maxfr=1568; \
+	 m config2 my_modid=$my_modid; \
+	 port ge$turbo_port speed=2500; \
+	 vlan add 1 pbm=ge$turbo_port ubm=none"
+
+if !$?no_bcm && $?drac_any \
+   "m modport_7_0 port_for_mod1=0xc"
+if !$?no_bcm && $?lynx_any \
+   "m modport_7_0 port_for_mod1=0x1"
+if !$?no_bcm && $?tucana \
+   "stkmode modid=0;"
+if !$?no_bcm && $?tucana && !$?magnum && !$?tucana_nohg \
+   "m modport_7_0 port_for_mod2=0x38; \
+    m imodport_7_0 port_for_mod0=0 port_for_mod1=0 port_for_mod2=0x38; \
+    stkmode modid=0"
+if !$?no_bcm && $?xgs_switch && !$?rcpu_only\
+   "stkmode modid=0; \
+    s CMIC_COS_CTRL_RX CH0_COS_BMP=0,CH1_COS_BMP=0xff, \
+        CH2_COS_BMP=0,CH3_COS_BMP=0"
+
+# Back-to-back Draco setup.
+
+# Draco chips must run at 127MHz. Some older versions
+# are not set to this frequency.
+
+if $?draco_stk && $?unit0 \
+    "i2c probe quiet; bb clock Ref125 127"
+
+# Applies to SDK Baseboard with either internal or external Higigs,
+# as well as the Galahad reference design.
+
+if $?draco_b2b && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if !$?simulator && $?draco_b2b && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_b2b && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Merlin, White Knight, Black Knight setup.
+#	Draco unit 1 is on Herc port 8
+#	Draco unit 2 is on Herc port 1
+
+if $?draco_herc4 && $?unit0 \
+    "w uc.hpic7 0 1 0x0; \
+     w uc.hpic7 1 1 0x2; \
+     w uc.hpic0 0 1 0x100; \
+     w uc.hpic0 1 1 0x0"
+
+if !$?simulator && $?draco_herc4 && $?unit0 \
+     "i2c probe quiet; bb clock Ref125 127"
+
+if $?draco_herc4 && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12"
+
+if $?draco_herc4 && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0"
+
+# Lancelot setup
+# (enabled by adding the property "lancelot=1")
+# Notes:
+#	Draco unit 1 is on Herc port 7
+#	Draco unit 2 is on Herc port 8
+#	Draco unit 3 is on Herc port 1
+#	Draco unit 4 is on Herc port 2
+
+if $?lancelot && $?unit0 \
+    "w uc.hpic6 0 1 0x0; \
+     w uc.hpic6 1 1 0x100; \
+     w uc.hpic6 2 1 0x2; \
+     w uc.hpic6 3 1 0x4; \
+     w uc.hpic7 0 1 0x80; \
+     w uc.hpic7 1 1 0x0; \
+     w uc.hpic7 2 1 0x2; \
+     w uc.hpic7 3 1 0x4; \
+     w uc.hpic0 0 1 0x80; \
+     w uc.hpic0 1 1 0x100; \
+     w uc.hpic0 2 1 0x0; \
+     w uc.hpic0 3 1 0x4; \
+     w uc.hpic1 0 1 0x80; \
+     w uc.hpic1 1 1 0x100; \
+     w uc.hpic1 2 1 0x2; \
+     w uc.hpic1 3 1 0x0"
+
+if !$?simulator && $?lancelot && $?unit0 \
+     "i2c probe quiet; bb clock Draco_Core 127"
+
+if $?lancelot && $?unit1 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit2 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=0 \
+     port_for_mod2=12 port_for_mod3=12"
+
+if $?lancelot && $?unit3 \
+    "stkmode modid=2; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=0 port_for_mod3=12"
+
+if $?lancelot && $?unit4 \
+    "stkmode modid=3; \
+     m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=0"
+
+# Lynx SDK (TwoLynx) setup
+# (enabled by adding the property "twolynx=1")
+
+if $?twolynx && $?unit0 \
+    "stkmode modid=0; \
+     m modport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     m imodport_7_0 port_for_mod0=0 port_for_mod1=1; \
+     "
+
+if $?twolynx && $?unit1 \
+    "stkmode modid=1; \
+     m modport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     m imodport_7_0 port_for_mod0=1 port_for_mod1=0; \
+     "
+# HercuLynx setup
+# (enabled by adding the property "herculynx=1")
+# Notes:
+#	Lynx unit 1 is on Herc port 1
+#	Lynx unit 2 is on Herc port 2
+#	Lynx unit 3 is on Herc port 3
+#	Lynx unit 4 is on Herc port 4
+#	Lynx unit 5 is on Herc port 5
+#	Lynx unit 6 is on Herc port 6
+#	Lynx unit 7 is on Herc port 7
+#	Lynx unit 8 is on Herc port 8
+
+if $?herculynx && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x008; \
+     w uc.hpic0 3 1 0x010; \
+     w uc.hpic0 4 1 0x020; \
+     w uc.hpic0 5 1 0x040; \
+     w uc.hpic0 6 1 0x080; \
+     w uc.hpic0 7 1 0x100; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x008; \
+     w uc.hpic1 3 1 0x010; \
+     w uc.hpic1 4 1 0x020; \
+     w uc.hpic1 5 1 0x040; \
+     w uc.hpic1 6 1 0x080; \
+     w uc.hpic1 7 1 0x100; \
+                         ; \
+     w uc.hpic2 0 1 0x002; \
+     w uc.hpic2 1 1 0x004; \
+     w uc.hpic2 2 1 0x008; \
+     w uc.hpic2 3 1 0x010; \
+     w uc.hpic2 4 1 0x020; \
+     w uc.hpic2 5 1 0x040; \
+     w uc.hpic2 6 1 0x080; \
+     w uc.hpic2 7 1 0x100; \
+                         ; \
+     w uc.hpic3 0 1 0x002; \
+     w uc.hpic3 1 1 0x004; \
+     w uc.hpic3 2 1 0x008; \
+     w uc.hpic3 3 1 0x010; \
+     w uc.hpic3 4 1 0x020; \
+     w uc.hpic3 5 1 0x040; \
+     w uc.hpic3 6 1 0x080; \
+     w uc.hpic3 7 1 0x100; \
+                         ; \
+     w uc.hpic4 0 1 0x002; \
+     w uc.hpic4 1 1 0x004; \
+     w uc.hpic4 2 1 0x008; \
+     w uc.hpic4 3 1 0x010; \
+     w uc.hpic4 4 1 0x020; \
+     w uc.hpic4 5 1 0x040; \
+     w uc.hpic4 6 1 0x080; \
+     w uc.hpic4 7 1 0x100; \
+                         ; \
+     w uc.hpic5 0 1 0x002; \
+     w uc.hpic5 1 1 0x004; \
+     w uc.hpic5 2 1 0x008; \
+     w uc.hpic5 3 1 0x010; \
+     w uc.hpic5 4 1 0x020; \
+     w uc.hpic5 5 1 0x040; \
+     w uc.hpic5 6 1 0x080; \
+     w uc.hpic5 7 1 0x100; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x008; \
+     w uc.hpic6 3 1 0x010; \
+     w uc.hpic6 4 1 0x020; \
+     w uc.hpic6 5 1 0x040; \
+     w uc.hpic6 6 1 0x080; \
+     w uc.hpic6 7 1 0x100; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x008; \
+     w uc.hpic7 3 1 0x010; \
+     w uc.hpic7 4 1 0x020; \
+     w uc.hpic7 5 1 0x040; \
+     w uc.hpic7 6 1 0x080; \
+     w uc.hpic7 7 1 0x100; \
+                         ; \
+     "
+
+if $?herculynx && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?herculynx && $?unit1 \
+    "stkmode modid=0"
+
+if $?herculynx && $?unit2 \
+    "stkmode modid=1"
+
+if $?herculynx && $?unit3 \
+    "stkmode modid=2"
+
+if $?herculynx && $?unit4 \
+    "stkmode modid=3"
+
+if $?herculynx && $?unit5 \
+    "stkmode modid=4"
+
+if $?herculynx && $?unit6 \
+    "stkmode modid=5"
+
+if $?herculynx && $?unit7 \
+    "stkmode modid=6"
+
+if $?herculynx && $?unit8 \
+    "stkmode modid=7"
+
+# LynxaLot setup
+# (enabled by adding the property "lynxalot=1")
+# Notes:
+#	Lynx unit 0 is on Herc port 3 (hg2/hpic2) (mod 0)
+#	Lynx unit 1 is on Herc port 4 (hg3/hpic3) (mod 1)
+#	Higig conn 0 is on Herc port 5 (hg4/hpic4)
+#	Higig conn 1 is on Herc port 6 (hg5/hpic5)
+#	Draco unit 3 is on Herc port 7 (hg6/hpic6) (mod 2)
+#	Draco unit 4 is on Herc port 8 (hg7/hpic7) (mod 3)
+#	Draco unit 5 is on Herc port 1 (hg0/hpic0) (mod 4)
+#	Draco unit 6 is on Herc port 2 (hg1/hpic1) (mod 5)
+
+if $?lynxalot && $?unit2 \
+    " \
+     w uc.hpic0 0 1 0x008; \
+     w uc.hpic0 1 1 0x010; \
+     w uc.hpic0 2 1 0x080; \
+     w uc.hpic0 3 1 0x100; \
+     w uc.hpic0 4 1 0x002; \
+     w uc.hpic0 5 1 0x004; \
+                         ; \
+     w uc.hpic1 0 1 0x008; \
+     w uc.hpic1 1 1 0x010; \
+     w uc.hpic1 2 1 0x080; \
+     w uc.hpic1 3 1 0x100; \
+     w uc.hpic1 4 1 0x002; \
+     w uc.hpic1 5 1 0x004; \
+                         ; \
+     w uc.hpic2 0 1 0x008; \
+     w uc.hpic2 1 1 0x010; \
+     w uc.hpic2 2 1 0x080; \
+     w uc.hpic2 3 1 0x100; \
+     w uc.hpic2 4 1 0x002; \
+     w uc.hpic2 5 1 0x004; \
+                         ; \
+     w uc.hpic3 0 1 0x008; \
+     w uc.hpic3 1 1 0x010; \
+     w uc.hpic3 2 1 0x080; \
+     w uc.hpic3 3 1 0x100; \
+     w uc.hpic3 4 1 0x002; \
+     w uc.hpic3 5 1 0x004; \
+                         ; \
+     w uc.hpic6 0 1 0x008; \
+     w uc.hpic6 1 1 0x010; \
+     w uc.hpic6 2 1 0x080; \
+     w uc.hpic6 3 1 0x100; \
+     w uc.hpic6 4 1 0x002; \
+     w uc.hpic6 5 1 0x004; \
+                         ; \
+     w uc.hpic7 0 1 0x008; \
+     w uc.hpic7 1 1 0x010; \
+     w uc.hpic7 2 1 0x080; \
+     w uc.hpic7 3 1 0x100; \
+     w uc.hpic7 4 1 0x002; \
+     w uc.hpic7 5 1 0x004; \
+                         ; \
+     "
+
+if $?lynxalot && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?lynxalot && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?lynxalot && $?unit0 \
+    "stkmode modid=0"
+     
+if $?lynxalot && $?unit1 \
+    "stkmode modid=1"
+
+if $?lynxalot && $?unit3 \
+    "stkmode modid=2"
+
+if $?lynxalot && $?unit4 \
+    "stkmode modid=3"
+
+if $?lynxalot && $?unit5 \
+    "stkmode modid=4"
+
+if $?lynxalot && $?unit6 \
+    "stkmode modid=5"
+
+# guenevere setup
+# (enabled by adding the property "guenevere=1")
+# Notes:
+#       hgX mapping based on pbmp_valid.0=0x1b7
+#	Draco unit 1 is on Herc port 1 (hg0/hpic0) (mod 0)
+#	Draco unit 2 is on Herc port 2 (hg1/hpic1) (mod 1)
+#	Lynx unit 3 is on Herc port 8 (hg5/hpic7) (mod 2)
+#	Lynx unit 4 is on Herc port 7 (hg4/hpic6) (mod 3)
+#	Higig conn 0 is on Herc port 4 (hg2/hpic3)
+#	Higig conn 1 is on Herc port 5 (hg3/hpic4)
+#       Herc port 3 - Unused (hpic2)
+#       Herc port 6 - Unused (hpic5)
+if $?guenevere && $?unit0 \
+    " \
+     w uc.hpic0 0 1 0x002; \
+     w uc.hpic0 1 1 0x004; \
+     w uc.hpic0 2 1 0x100; \
+     w uc.hpic0 3 1 0x080; \
+                         ; \
+     w uc.hpic1 0 1 0x002; \
+     w uc.hpic1 1 1 0x004; \
+     w uc.hpic1 2 1 0x100; \
+     w uc.hpic1 3 1 0x080; \
+                         ; \
+     w uc.hpic7 0 1 0x002; \
+     w uc.hpic7 1 1 0x004; \
+     w uc.hpic7 2 1 0x100; \
+     w uc.hpic7 3 1 0x080; \
+                         ; \
+     w uc.hpic6 0 1 0x002; \
+     w uc.hpic6 1 1 0x004; \
+     w uc.hpic6 2 1 0x100; \
+     w uc.hpic6 3 1 0x080; \
+                         ; \
+     "
+
+if $?guenevere && $?lynx_any \
+     "m modport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     m imodport_7_0 \
+     port_for_mod0=1 port_for_mod1=1 \
+     port_for_mod2=1 port_for_mod3=1 \
+     port_for_mod4=1 port_for_mod5=1 \
+     port_for_mod6=1 port_for_mod7=1; \
+     "
+
+if $?guenevere && $?drac_any \
+    "m modport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     m imodport_7_0 port_for_mod0=12 port_for_mod1=12 \
+     port_for_mod2=12 port_for_mod3=12 \
+     port_for_mod4=12 port_for_mod5=12 \
+     port_for_mod6=12 port_for_mod7=12; \
+     "
+
+if $?guenevere && $?unit1 \
+    "stkmode modid=0"
+     
+if $?guenevere && $?unit2 \
+    "stkmode modid=1"
+
+if $?guenevere && $?unit3 \
+    "stkmode modid=2"
+
+if $?guenevere && $?unit4 \
+    "stkmode modid=3"
+     
+# felix48 setup
+# (enabled by adding the property "felix48=1")
+# Notes:
+#       BCM56102 unit-0 higig port (port 26) is connected
+#       to BCM56102 Unit-1 higig port (port 26)
+#
+
+if $?felix48 && $?unit0 \
+    "stkmode modid=0 ; \
+     m IEGR_PORT MY_MODID=0; \
+     m XPORT_CONFIG MY_MODID=0; \
+     w MODPORT_MAP 1 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+
+if $?felix48 && $?unit1 \
+    "stkmode modid=1 ; \
+     m IEGR_PORT MY_MODID=1; \
+     m XPORT_CONFIG MY_MODID=1; \
+     w MODPORT_MAP 0 1 HIGIG_PORT_BITMAP=0x4 ; \
+     "
+# fbpoe setup
+# (enabled by adding the property "fbpoe=1")
+# Notes:
+#       BCM56504 unit-0 higig port (port 27,28) is connected
+#       to BCM56504 Unit-1 higig port (port 27,28)
+#
+
+if $?unit0 && $?firebolt_any && $?fbpoe     \
+  "stkmode modid=0;           \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+if $?unit1 && $?firebolt_any && $?fbpoe \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0x4; \
+   m HIGIG_TRUNK_GROUP HIGIG_TRUNK_RTAG1=3 \
+                       HIGIG_TRUNK_ID1_PORT0=2 \
+                       HIGIG_TRUNK_ID1_PORT1=3 \
+                       HIGIG_TRUNK_ID1_PORT2=2 \
+                       HIGIG_TRUNK_ID1_PORT3=3; \
+   m HIGIG_TRUNK_CONTROL HIGIG_TRUNK_ID2=1 \
+                         HIGIG_TRUNK2=1 \
+                         HIGIG_TRUNK_ID3=1 \
+                         HIGIG_TRUNK3=1 \
+                         HIGIG_TRUNK_BITMAP1=0xc \
+                         ACTIVE_PORT_BITMAP=0xf"
+
+# Dual Raptor/Raven boards
+if $?raven_eb_48p || $?rap24_ref \
+    "local rcpu_system 1"
+if $?unit0 && $?rcpu_system \
+   "stkmode modid=0"
+if $?unit1 && $?rcpu_system \
+   "stkmode modid=1"
+
+# LM fb48 platform setup
+# (enabled by adding the property "lm48p=1")
+#
+if $?unit0 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=0"
+
+if $?unit1 && $?firebolt_any && $?lm48p || $?lm48p_D \
+   "stkmode modid=1"
+
+# Set Firebolt POE power level 170(total) - 110(switch) = 60
+if $?fbpoe \
+        "local poepower 60"
+
+# Set Draco15 POE power level 170(total) - 80(switch) = 90
+if $?drac15\
+        "local poepower 90"
+
+# Hurricane3 BCM956160R setup
+# Notes:
+#       BCM56160 unit-0 higig port (port 29,30) is connected
+#       to BCM56160 Unit-1 higig port (port 26,27)
+#
+
+if $?bcm956160r && $?unit0  \
+  "stkmode modid=0; \
+   w modport_map 1 1 HIGIG_PORT_BITMAP=0x60000000; \
+   trunk add id=128 r=3 pbm=hg0-hg1"
+
+if $?bcm956160r && $?unit1  \
+  "stkmode modid=1; \
+   w modport_map 0 1 HIGIG_PORT_BITMAP=0xc000000; \
+   trunk add id=128 r=3 pbm=hg0-hg1"
+
+# if enable_poe is set, then enable the POE processor for
+# either Firebolt or Draco15 platform
+if $?unit0 && $?enable_poe && $?fbpoe || $?drac15 \
+        "$echo rc: Enabling POE ...; \
+         poesel reset; \
+         i2c probe quiet; \
+         xpoe verbose off; \
+         xpoe power $poepower; \
+         xpoe verbose on; \
+         poesel enable"
+
+# mark this unit so that subsequent rc runs are quiet
+setenv rc$unit 1
+
+if $?macsec '\
+    macsec sync; \
+    $echo "rc: MACSEC CLI Enabled"'
+
+# cache a copy of rc.soc in memory
+rccache addq rc.soc
+
+# setup chassis if requested
+if !"expr $?autochassis2 && $unit == $units - 1" \
+    "setenv chassis2_no_rc 1; \
+     rcload c2switch.soc; \
+     setenv chassis2_no_rc; \
+    "
+
+# start stacking if requested
+if !"expr $?autostack && $unit == $units - 1" \
+	"rcload stk.soc"
+
+if !"expr $?aedev + 0" && !"expr $unit == $units - 1" \
+       "aedev init"
+
+# hurricane 48p FE platform LED setup for 56146_A0 and 56147_A0 board
+# (enabled by adding the property "fe_hu_48p=1")
+#
+if $?fe_hu_48p && $?BCM56146 || $?BCM56147 \
+    "phy fe0 0x1f 0x008b; \
+     phy fe0 0x1a 0x3f09;\
+     phy fe8 0x1f 0x008b; \
+     phy fe8 0x1a 0x3f09; \
+     phy fe16 0x1f 0x008b; \
+     phy fe16 0x1a 0x3f09"
+
+# enable LED matrix mode for PHY54292 on BCM953411K/R
+if $?bcm953411 \
+    "rcload gh_bcm953411x.soc"
+
+if $?simulator \
+    'echo -n "Chip init finishes at: ";date'
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/reload.soc b/bal_release/3rdparty/bcm-sdk/rc/svk4/reload.soc
new file mode 100644
index 0000000..f48a50e
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/reload.soc
@@ -0,0 +1,8 @@
+#
+# $Id: reload-dune.soc,v 1.1 2011/12/13 15:37:13 assaf Exp $
+#
+# $Copyright: (c) 2006 Broadcom Corp.
+# All Rights Reserved.$
+
+setenv warmboot 1
+rcload rc.soc
diff --git a/bal_release/3rdparty/bcm-sdk/rc/svk4/start_ing.sh b/bal_release/3rdparty/bcm-sdk/rc/svk4/start_ing.sh
new file mode 100755
index 0000000..6f79fb3
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/rc/svk4/start_ing.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+/broadcom/mk_bcm_node.sh
+/broadcom/bcm.user
+
diff --git a/bal_release/3rdparty/bcm-sdk/sdk-bal-6.5.7.patch b/bal_release/3rdparty/bcm-sdk/sdk-bal-6.5.7.patch
new file mode 100644
index 0000000..43f8f01
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/sdk-bal-6.5.7.patch
@@ -0,0 +1,1394 @@
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/include/appl/diag/bal_cmd.h sdk-all-6.5.7/include/appl/diag/bal_cmd.h
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/include/appl/diag/bal_cmd.h	1970-01-01 02:00:00.000000000 +0200
++++ sdk-all-6.5.7/include/appl/diag/bal_cmd.h	2017-01-26 11:24:18.251278489 +0200
+@@ -0,0 +1,22 @@
++/******************************************************************************
++ *  
++ *  Copyright 2016 - Broadcom Corporation
++ *    
++ ******************************************************************************/  
++
++#ifndef BAL_CMD_H
++#define BAL_CMD_H
++
++#include <appl/diag/shell.h>
++ 
++static char cmd_bal_usage[] = 
++    "bal [cmd]\n\t"
++    "Commands:\n\t"
++    "  trap_target <target_ip:port>  - Set a remote ip and port to receive local cpu trapped packets\n\t"
++    "  trap_receive <sender_ip:port> - Set a local port to receive remote sender_ip messages \n\t"
++    "\n\t"
++    "When called with no parameters, initialize the BAL BCM Api and enter the bal sub-shell.\n";
++
++cmd_result_t cmd_bal(int unit, args_t *args);
++
++#endif    
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/include/bcm/rx.h sdk-all-6.5.7/include/bcm/rx.h
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/include/bcm/rx.h	2016-12-01 05:15:05.000000000 +0200
++++ sdk-all-6.5.7/include/bcm/rx.h	2017-01-26 11:30:12.960122166 +0200
+@@ -1789,5 +1789,18 @@
+     bcm_rx_cosq_mapping_t *rx_cosq_mapping);
+ 
+ #endif /* BCM_HIDE_DISPATCHABLE */
++ 
++/*
++ * BAL patch to allow RPC register packet receive callback
++ */
++typedef void (*dpp_rx_cb_f) (
++        int unit,
++        int port,
++        int reason,
++        unsigned char *pkt,
++        int pkt_len);
++
++extern
++void dpp_dft_tx_cb(int unit, int port, int reason, unsigned char *payload, int payload_len);
+ 
+ #endif /* __BCM_RX_H__ */
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Make.config sdk-all-6.5.7/make/Make.config
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Make.config	2016-12-01 05:16:16.000000000 +0200
++++ sdk-all-6.5.7/make/Make.config	2017-01-26 11:34:39.553494599 +0200
+@@ -32,6 +32,13 @@
+ # }
+ endif
+ 
++ifeq (${BUILD_ING_AS_LIB},1)
++CFGFLAGS += -DBUILD_ING_AS_LIB -DNO_CTRL_C
++endif
++ifeq (${CONFIG_SWITCH_RPC},y)
++CFGFLAGS += -DCONFIG_SWITCH_RPC
++endif
++
+ #
+ # Set a default target if one is not set. If override-target is set,
+ # then the target will become override-target and a warning is printed
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Make.local.bal sdk-all-6.5.7/make/Make.local.bal
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Make.local.bal	1970-01-01 02:00:00.000000000 +0200
++++ sdk-all-6.5.7/make/Make.local.bal	2017-01-26 11:36:43.722735752 +0200
+@@ -0,0 +1,30 @@
++#FEATURE_LIST := CINT L3 I2C MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CUSTOMER CHASSIS RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP KBP
++FEATURE_LIST := CINT L3 I2C MEM_SCAN EDITLINE TEST BCM_SAL_PROFILE CHASSIS RCPU ATPTRANS_SOCKET DUNE_UI INTR APIMODE PTP 
++
++DEBUG_CFLAGS=-Wdeclaration-after-statement
++
++BCM_PTL_SPT=1
++
++ALL_DPP_CHIPS = 1
++ALL_DFE_CHIPS = 1
++
++# Includes XML library and enables use of "diag pp dump" utility for PP import/export facilities 
++DATAIO_SUPPORT = 1
++KERN_VER=3.7.10
++
++CFGFLAGS += -DSTATIC=static
++CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT
++CFGFLAGS += -DBCM_WARM_BOOT_SUPPORT_SW_DUMP
++CFGFLAGS += -DBCM_EASY_RELOAD_WB_COMPAT_SUPPORT
++CFGFLAGS += -DBCM_CONTROL_API_TRACKING
++CFGFLAGS += -D__DUNE_LINUX_BCM_CPU_PCIE__
++CFGFLAGS += -DPHYS_ADDRS_ARE_64BITS -DSAL_BDE_32BIT_USER_64BIT_KERNEL
++CFGFLAGS += -D_SIMPLE_MEMORY_ALLOCATION_=0 -DUSE_LINUX_BDE_MMAP=1
++CFGFLAGS += -DSCACHE_CRC_CHECK
++
++CFGFLAGS += -DBROADCOM_SVK
++
++#KBP_DEVICE := KBP_ALG
++
++VENDOR_LIST=CUSTOMER78 BROADCOM DNX
++
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-linux sdk-all-6.5.7/make/Makefile.unix-linux
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-linux	2016-12-01 05:16:17.000000000 +0200
++++ sdk-all-6.5.7/make/Makefile.unix-linux	2017-01-26 13:16:35.035828648 +0200
+@@ -47,7 +47,7 @@
+ 
+ 
+ # Linux
+-LIBS= -lnsl -lpthread -lm -lrt
++LIBS= -lnsl -pthread -lm -lrt
+ CFGFLAGS += -DBCM_PLATFORM_STRING=\"unix-linux\"
+ 
+ # For GCC 4.2.x, add -Wno-address
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-linux-64 sdk-all-6.5.7/make/Makefile.unix-linux-64
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-linux-64	2016-12-01 05:16:17.000000000 +0200
++++ sdk-all-6.5.7/make/Makefile.unix-linux-64	2017-01-26 13:17:35.959446054 +0200
+@@ -48,7 +48,7 @@
+ FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST))
+ 
+ # Linux
+-LIBS= -lnsl -lpthread -lm -lrt
++LIBS= -lnsl -pthread -lm -lrt
+ 
+ CFGFLAGS += -DBCM_PLATFORM_STRING=\"unix-linux-64\"
+ 
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-linux~ sdk-all-6.5.7/make/Makefile.unix-linux~
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-linux~	1970-01-01 02:00:00.000000000 +0200
++++ sdk-all-6.5.7/make/Makefile.unix-linux~	2017-01-26 13:16:34.973829038 +0200
+@@ -0,0 +1,60 @@
++# $Id: Makefile.unix-linux,v 1.11 Broadcom SDK $
++# $Copyright: (c) 2016 Broadcom.
++# Broadcom Proprietary and Confidential. All rights reserved.$
++#
++# Build rules for Linux/x86 (Little Endian) with PLI support
++
++include ${SDK}/make/Makefile.unix-common
++
++# When using GDB on Linux, you may want to use "setenv GDB 1" to disable
++# editline.  For best results put "set environment GDB 1" in your .gdbinit.
++
++# Linux-specific Configuration Flags
++
++ENDIAN_DEF = -DLE_HOST=1
++
++# Notes on AMD Athlon 64-bit
++#
++# Compiles on x86_64 default to 32-bit emulation unless 64-bit mode
++# is specifically requested in Make.local by uncommenting the two defines
++# for PTRS_ARE_64BITS and LONGS_ARE_64BITS.
++#
++# Note that the code base will compile in 64-bit mode, but will not run
++# correctly because malloc() can return values >32 bits and the PLISIM
++# protocol only supports 32-bit addresses.
++
++ifeq ($(shell uname -m),x86_64)
++ ifeq (,$(findstring -DPTRS_ARE_64BITS,$(CFGFLAGS)))
++  CC = ${HCC} -m32
++  CXX = g++ -m32
++ else
++  CC = ${HCC}
++  CXX = g++
++ endif
++endif
++
++LD	= ld
++AR	= ar
++ARFLAGS	= -rc
++STRIP	= strip
++RANLIB  = ranlib
++
++# Filter out features that cannot or should not be supported in Linux
++ifdef ESW_CHIPS
++_FEATURE_EXCLUDE_LIST += OOB_RCPU
++endif
++FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST))
++
++
++# Linux
++LIBS= -lnsl -lpthread -lm -lrt
++CFGFLAGS += -DBCM_PLATFORM_STRING=\"unix-linux\"
++
++# For GCC 4.2.x, add -Wno-address
++GCC_MAJOR_VER  = $(shell echo |$(CC) -dM -E -| grep __GNUC__ | cut -d' ' -f3)
++GCC_MINOR_VER  = $(shell echo |$(CC) -dM -E -| grep __GNUC_MINOR__ | cut -d' ' -f3)
++ifeq (${GCC_MAJOR_VER}, 4)
++ifeq (${GCC_MINOR_VER}, 2)
++BCM_EXTRA_CC_CFLAGS   = -Wno-address
++endif
++endif
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-netbsd sdk-all-6.5.7/make/Makefile.unix-netbsd
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-netbsd	2016-12-01 05:16:17.000000000 +0200
++++ sdk-all-6.5.7/make/Makefile.unix-netbsd	2017-01-26 13:13:03.884156251 +0200
+@@ -27,7 +27,7 @@
+ FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST))
+ 
+ # NetBSD
+-LIBS= -lpthread -lm -lsem
+++LIBS= -pthread -lm -lsem
+ 
+ CFGFLAGS += -DBCM_PLATFORM_STRING=\"unix-netbsd\"
+ 
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-user sdk-all-6.5.7/make/Makefile.unix-user
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/make/Makefile.unix-user	2016-12-01 05:16:17.000000000 +0200
++++ sdk-all-6.5.7/make/Makefile.unix-user	2017-01-26 13:14:29.289618967 +0200
+@@ -42,7 +42,7 @@
+ OSTYPE = LINUX
+ 
+ # Linux
+-LIBS= -lnsl -lpthread -lm -lrt
++LIBS= -lnsl -pthread -lm -lrt
+ 
+ #
+ # ORIGIN is used to Optionally select different CFLAGS. It is used to import
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/bal_cmd.c sdk-all-6.5.7/src/appl/diag/bal_cmd.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/bal_cmd.c	1970-01-01 02:00:00.000000000 +0200
++++ sdk-all-6.5.7/src/appl/diag/bal_cmd.c	2017-01-26 11:38:20.574144410 +0200
+@@ -0,0 +1,837 @@
++/******************************************************************************
++ * 
++ * Copyright 2015- Broadcom Corporation
++ * This program is the proprietary software of Broadcom Corporation
++ * and/or its licensors, and may only be used, duplicated, modified or
++ * distributed pursuant to the terms and conditions of a separate,
++ * written license agreement executed between you and Broadcom (an
++ * "Authorized License").  Except as set forth in an Authorized License,
++ * Broadcom grants no license (express or implied), right to use, or
++ * waiver of any kind with respect to the Software, and Broadcom
++ * expressly reserves all rights in and to the Software and all
++ * intellectual property rights therein.  IF YOU HAVE NO AUTHORIZED
++ * LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE IN ANY WAY, AND
++ * SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE ALL USE OF THE
++ * SOFTWARE.
++ *   
++ * Except as expressly set forth in the Authorized License,
++ *   
++ * 1.  This program, including its structure, sequence and organization,
++ * constitutes the valuable trade secrets of Broadcom, and you shall use
++ * all reasonable efforts to protect the confidentiality thereof, and to
++ * use this information only in connection with your use of Broadcom
++ * integrated circuit products.
++ *    
++ * 2.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED
++ * "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
++ * REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR
++ * OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
++ * DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
++ * NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
++ * ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
++ * CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING OUT
++ * OF USE OR PERFORMANCE OF THE SOFTWARE.
++ *   
++ * 3.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM
++ * OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL,
++ * INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY
++ * RELATING TO YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF
++ * BROADCOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR (ii)
++ * ANY AMOUNT IN EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE
++ * ITSELF OR U.S. $1, WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY
++ * NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED
++ * REMEDY.
++ *   
++ ******************************************************************************/
++ 
++/**
++ * @file bal_cmd.c_
++ * @brief BAL ING CLI commands support SDK access that is not supported by regular CLI
++ * The BAL CLI command line interface is implemented by the CLI
++ * module. The CLI module can be used as the configuration and management
++ * interface for the BAL Switch Util. BAL Switch Util configuration can be specified
++ * using a series of BAL CLI commands. The main purpose of the CLI is to provide
++ * ING API access that are not normally available through public API, such as RPC
++ * access to ING features that are deep in SDK stack.
++ * 
++ **/
++
++ /*@{*/
++ 
++/* --- system includes --- */
++
++#include <unistd.h>
++#include <stdio.h>
++#include <string.h>
++#include <ctype.h>
++#include <stdlib.h>
++#include <appl/diag/shell.h>
++#include <appl/diag/parse.h>
++#include <sal/appl/sal.h>
++#include <sal/appl/editline/editline.h>
++#include <errno.h>
++#include <sys/types.h>
++#include <sys/socket.h>
++#include <netinet/in.h>
++#include <arpa/inet.h>
++#include <bcm/rx.h>
++#include <bcm/error.h>
++#include <bcm/stack.h>
++
++#define BAL_CLI_VERSION  "1.0"
++
++/* --- project includes --- */
++extern int start_trap_service(char *ip_port);
++extern int start_host_listener(char *ip_port);
++
++/* --- local static constants ---*/
++#define BAL_SWITCH_CLI_IP_LEN 128
++typedef struct bal_switch_cli_cfg_t
++{
++   char trap_target[BAL_SWITCH_CLI_IP_LEN];           /* remote ip:port address where the trapped packet sent */
++   char trap_receive[BAL_SWITCH_CLI_IP_LEN];          /* remote ip where the local port receive message  */
++}bal_switch_cli_cfg_t;
++
++static bal_switch_cli_cfg_t g_cur_ctx;
++
++static bal_switch_cli_cfg_t *gp_cur_ctx = &g_cur_ctx;
++
++enum
++{
++    BAL_REASON_SEND_TO_NNI = 1,
++    BAL_REASON_SEND_TO_PON
++};
++      
++/**
++ *  * @brief Maximum number of arguments supported by the 'bal' CLI command
++ *   */
++#define MAX_ARGS 10
++
++/**
++ ** @brief BAL CLI help text
++ **/
++#define HELP                                                           \
++"exit          - Exit the BAL sub-shell\n"                             \
++"show          - Show current settings\n"                              \
++"trap_target   - register callback and send CPU trapped packets to remote IP:PORT\n"              \
++"trap_receive  - Start a receiving thread to listen on PORT for messages from remote IP \n"       \
++
++
++/**
++ ** @brief BAL Switch App help text specific to 'show' commands
++ **/
++#define SHOW_HELP                                               \
++"show config   - Display the BAL CLI configuration\n"           \
++"show version  - Display the BAL BCM SDK version\n"             \
++
++
++/**
++ *  @brief CLI prompt string
++ * */
++static char g_bal_cli_prompt[8];
++
++
++/*
++ * @brief BAL Switch App help text
++ *
++ * @return char*  A string containing the prompt to display
++ **/
++static char *bal_set_prompt()
++{
++    sprintf(g_bal_cli_prompt, "bal>");
++    return g_bal_cli_prompt;
++}
++
++/**
++ *  @brief Parse a line of input into a POSIX-like argument list
++ * 
++ ** @param parsed_input  Unparsed line of CLI input
++ ** @param argc         Pointer to the number of arguments in the list
++ ** @param argv         Pointer to the argument list
++ ** @return int         Number of argument that has been successfully parsed
++ **/
++int bal_parse_input (char *parsed_input, int *argc, char **argv)
++{
++    char *s;
++    int largc;
++
++    largc = 0;
++    s = parsed_input;
++    while ((largc < MAX_ARGS) && (s != NULL) && (*s != 0))
++    {
++        /* Skip leading whitespace */
++        s += strspn (s, " \t");
++
++        /* Non-whitespace found */
++        if (*s != 0)
++        { 
++            /* Add the string to the argument list */
++            argv[largc++] = s;
++
++            /* Find the trailing whitespace (if any...) */
++            s = strpbrk (s, " \t");
++            if (s != NULL)
++            { 
++                /* Found some white space, null out the first white
++                   space character. */ 
++                if (largc < MAX_ARGS)
++                {
++                    *s++ = 0;
++                }
++
++                /* Otherwise, don't null the last param, to pass it on
++                 * command to parse themselves 
++                 */
++            }
++        }
++    }
++
++    *argc = largc;
++
++    return largc;
++}
++
++ /* BAL packet_in function and definitions */
++ typedef struct
++  {
++      int socket;
++      struct sockaddr_in addr;
++  }trap_target_t;
++  static trap_target_t s_target_device;
++  static int target_init = 0;
++  #define DEFAULT_SOP_ADJ    2 
++  #define DEFAULT_REASON_ADJ 4 
++
++  bcm_rx_t trap_service_cb(int unit, bcm_pkt_t *pkt, void *cookie)
++  {
++
++    uint8 *p_payload;
++    int dpp_hdr_len, payload_len, n_sent;
++    trap_target_t *p_target_device = (trap_target_t *)cookie;
++    uint16 *p_src_port, def_sop;
++    uint32 *p_reason, def_reason;
++    /* skip the dpp header - 19 bytes */
++    p_payload = pkt->_pkt_data.data;
++    dpp_hdr_len = pkt->tot_len - pkt->pkt_len + 0;
++    payload_len = pkt->tot_len - dpp_hdr_len;
++    p_payload += dpp_hdr_len;
++
++    /*
++     * replace SOP_ADJ bytes with source port info before send
++     * assuming DEFAULT_SOP_ADJ is always 2 bytes
++     * replace SOP_REASON bytes with trap reason - TBD
++     */
++     p_src_port = (uint16 *)(p_payload - DEFAULT_SOP_ADJ);
++     /* save the original info */
++     def_sop = *(p_src_port);
++     /* replace 2 bytes with ingress port info */
++     *p_src_port = htons(pkt->src_port & 0xff); /* pkt->src_port is 1 byte long */
++
++     p_reason = (uint32 *)(p_payload - DEFAULT_SOP_ADJ - DEFAULT_REASON_ADJ);
++     /* save the original info */
++     def_reason = *(p_reason);
++     /* replace 4 bytes with reason code */
++     *p_reason = htonl(pkt->rx_trap_data);
++
++     n_sent = sendto(p_target_device->socket,
++                     p_payload-DEFAULT_SOP_ADJ-DEFAULT_REASON_ADJ,
++                     payload_len+DEFAULT_SOP_ADJ+DEFAULT_REASON_ADJ, 0,
++                     (struct sockaddr *) &(p_target_device->addr),
++                     sizeof(struct sockaddr_in));
++
++     /* put back the original values */
++     *p_src_port = def_sop;
++     *p_reason   = def_reason;
++
++     if (n_sent > 0)
++         return BCM_RX_HANDLED;
++     else
++         return BCM_RX_NOT_HANDLED;
++  }
++
++ int start_trap_service( char *ip_port) 
++  {
++      int ret, port;
++      char ip[80], *col;
++
++      if(target_init == 0)
++      {
++          if((s_target_device.socket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0)
++          {
++              return -1;
++          }
++          target_init = 1;
++      }
++      /* fill in traget device info - ip_port has the format of ip:port, so look for ":" for separation */
++      col = strstr(ip_port, ":");
++      port = atoi(col+1);
++      /* terminate the string at the end of IP address */
++      *col = 0;
++      strcpy(ip, ip_port);
++
++      s_target_device.addr.sin_family = AF_INET;
++      s_target_device.addr.sin_port = htons(port);
++      s_target_device.addr.sin_addr.s_addr = inet_addr(ip);
++
++      ret = bcm_rx_register(0, "Cpu Traps", trap_service_cb, 50, (void *)&s_target_device, BCM_RCO_F_ALL_COS);
++      return ret;
++  }
++
++/**
++ ** @brief CLI parser and handler for 'trap_target' commands
++ **
++ ** This routine handles the 'bal trap_target [args]' CLI app configuration
++ ** commands.
++ **
++ ** @param argc  Pointer to the number of arguments in the list
++ ** @param argv  Pointer to the argument list
++ * */
++void bal_bcm_cli_trap_target(int argc, char **argv)
++{
++
++    if (argc != 1)
++    {
++        printf("Invalid arguments\n");
++        return;
++    }
++
++    {
++        strcpy(gp_cur_ctx->trap_target, argv[0]);
++        /* Configure the trap target with the specified setting. */
++        if (start_trap_service(argv[0]) != 0)
++        {
++            printf("Error, failed to start trap service on '%s'\n", 
++                   argv[0]);
++        }
++    }
++}
++
++typedef struct
++{
++      int udp_port;
++      sal_thread_t threadid;
++      dpp_rx_cb_f callback;
++}trap_context_t;
++
++  static trap_context_t trap_ctx = {0};
++  static int listener_init = 0;
++
++#define MAX_RX_PACKET_SIZE (2000)
++
++static void host_receive(void *p_user_data)
++{
++    int rc;
++    int sUDPSocket;
++    unsigned char cBuffer[MAX_RX_PACKET_SIZE];
++    int nBytesRecv = 0;
++    int nBufSize = MAX_RX_PACKET_SIZE;
++    socklen_t nReceiveAddrSize = 0;
++    int maxfd;
++    fd_set read_fds;
++    struct timeval tv;
++    uint16 *p_dst_port, dst_port;
++    trap_context_t *p_trap_ctx = (trap_context_t *)p_user_data;
++    uint32 *p_reason, reason;
++    struct sockaddr_in sReceiveFromAddr;
++
++    /* Create a connectionless socket */
++    sUDPSocket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
++    /* Check to see if we have a valid socket */
++    if(sUDPSocket < 0)
++    {
++        printf(" host_receive:create socket failed\n");
++        return;
++    }
++
++    /* Setup a bind on the socket, telling us what port and
++     * adapter to receive datagrams on.
++     * NOTE: we accept UDP packets from any sender as long
++     * as they arrive on the specified port.
++     */
++     memset(&sReceiveFromAddr, 0, sizeof(struct sockaddr_in));
++
++     sReceiveFromAddr.sin_family = AF_INET;
++     sReceiveFromAddr.sin_port = htons(p_trap_ctx->udp_port);
++     sReceiveFromAddr.sin_addr.s_addr = htonl(INADDR_ANY);
++
++     rc = bind(sUDPSocket, (struct sockaddr *)&sReceiveFromAddr,
++                            sizeof(struct sockaddr_in));
++     if (rc < 0)
++     {
++          printf("host_receive:bind failed\n");
++          return;
++     }
++
++     // Receive a datagram from another device
++     while(1)
++     {
++         FD_ZERO(&read_fds);
++         FD_SET(sUDPSocket, &read_fds);
++         maxfd = sUDPSocket;
++         /* Set the timeout */
++         tv.tv_sec  = 1;
++         tv.tv_usec = 0;  /*  1 seconds */
++         rc = select(maxfd + 1, &read_fds, NULL, NULL, &tv);
++
++         if (rc < 0)
++         {
++             printf(" host_receive:select failed err = %d\n", rc);
++             break;
++         }
++         if (rc == 0)
++         {
++             fflush(stdout);
++             continue;
++         }
++         // Get the datagram
++                                                                                                                                          nBytesRecv = recvfrom(sUDPSocket, cBuffer, nBufSize, 0,
++                               (struct sockaddr *) &sReceiveFromAddr,
++                               &nReceiveAddrSize);
++                                                                                                                                          printf("Got %d bytes message \n", nBytesRecv);
++                                                                                                                                          /* the first 4 bytes are reason */
++         p_reason = (uint32 *)(cBuffer);
++         reason = ntohl(*p_reason);
++
++         /* the next 2 bytes are destination port */
++         p_dst_port = (uint16 *)(cBuffer + DEFAULT_REASON_ADJ);
++         dst_port = ntohs(*p_dst_port);
++
++         /* call the register callback here - set unit to 0 as it is don't care */
++         if(p_trap_ctx->callback)
++         {
++             p_trap_ctx->callback(0,
++                                  dst_port,
++                                  reason,
++                                  cBuffer+DEFAULT_SOP_ADJ+DEFAULT_REASON_ADJ,
++                                  nBytesRecv-DEFAULT_SOP_ADJ-DEFAULT_REASON_ADJ);
++         }
++       }
++       close(sUDPSocket);
++
++       return;
++}
++
++
++void dpp_dft_tx_cb(int unit, int dst_port, int reason, unsigned char *payload, int payload_len)
++{
++
++    int i;
++    bcm_pkt_t *tx_pkt;
++    uint8_t tx_pkt_dune_header[6];
++    uint32_t tx_pkt_offset = 0;
++    bcm_gport_t sys_gport;
++    bcm_gport_t local_gport;
++    bcm_port_t sysport = 0;
++    bcm_gport_t local_cpu_port = 0;
++    int sdk_rc;
++
++    printf("Msg from core:\n");
++    printf(" dst port:%d, rcv reason: 0x%x, ", dst_port, reason);
++
++    /* dump out first  32 bytes */
++    printf("payload (first 12 bytes): ");
++    for(i=0; i<12; i++)
++    {
++      if(i%6 == 0 && i) printf(" ");
++      printf("%02x", payload[i]);
++    }
++    printf("\n");
++
++
++    /* Map the local port number to a CPU "system" port. */
++    local_gport = dst_port;
++    sdk_rc = bcm_stk_gport_sysport_get(unit, local_gport, &sys_gport);
++    if (sdk_rc != BCM_E_NONE)
++    {
++      /* Error */
++      printf("%s(): [PacketOut] bcm_stk_gport_sysport_get returned with failure code '%s'\n",
++             __FUNCTION__, bcm_errmsg(sdk_rc));
++      return;
++    }
++
++    sysport = sys_gport & 0xff;
++
++       /* Get the local CPU port */
++    sdk_rc = bcm_port_local_get(unit, BCM_GPORT_LOCAL_CPU, &local_cpu_port);
++    if (sdk_rc != BCM_E_NONE)
++    {
++      /* Error */
++      printf("%s(): [PacketOut] bcm_port_local_get returned with failure code '%s'\n",
++             __FUNCTION__, bcm_errmsg(sdk_rc));
++      return;
++    }
++
++    /* Allocate a packet structure */
++    sdk_rc = bcm_pkt_alloc(unit, payload_len+sizeof(tx_pkt_dune_header), 0, &tx_pkt);
++
++    if (sdk_rc != BCM_E_NONE)
++    {
++      /* Error */
++      printf("%s(): [PacketOut] bcm_pkt_alloc returned with failure code '%s'\n",
++             __FUNCTION__, bcm_errmsg(sdk_rc));
++      return;
++    }
++
++    /* Set up the packet for a single block */
++    tx_pkt->call_back = 0;
++    tx_pkt->blk_count = 1;
++    tx_pkt->unit = unit;
++
++    /* Dune TM header */
++    tx_pkt->_dpp_hdr[3] = 0x00; /* channel num */
++    tx_pkt->_dpp_hdr[2] = 0x00;
++    tx_pkt->_dpp_hdr[1] = 0x00;
++    tx_pkt->_dpp_hdr[0] = 0x00;
++
++    tx_pkt->_dpp_hdr_type = 1;  /* DPP_HDR_itmh_base */
++
++    /* PTCH */
++    tx_pkt_dune_header[0] = 0x50;
++    tx_pkt_dune_header[1] = local_cpu_port;
++
++    /* ITMH */
++    tx_pkt_dune_header[2] = 0x01;
++    tx_pkt_dune_header[3] = 0x00;
++    tx_pkt_dune_header[4] = (sysport & 0xff); /* Destination port */
++    tx_pkt_dune_header[5] = 0x00;
++
++   /* Insert the DUNE header into the packet */
++    bcm_pkt_memcpy (tx_pkt, tx_pkt_offset, tx_pkt_dune_header, sizeof(tx_pkt_dune_header));
++    tx_pkt_offset += sizeof(tx_pkt_dune_header);
++
++    /* Insert the payload into the packet */
++    bcm_pkt_memcpy (tx_pkt, tx_pkt_offset, payload, payload_len);
++    tx_pkt_offset += payload_len;
++
++    printf("%s(): [PacketOut] transmitting a %d length packet, "
++           "sys_gport:0x%X, sysport: %d\n",
++           __FUNCTION__,
++           payload_len,
++           sys_gport,
++           sysport);
++
++    /* Transmit the packet */
++    sdk_rc = bcm_tx(unit, tx_pkt, NULL);
++    if (sdk_rc != BCM_E_NONE)
++    {
++      /* Error */
++      printf( "%s():  bcm_tx returned with failure code '%s'\n",
++              __FUNCTION__, bcm_errmsg(sdk_rc));
++    }
++
++    /* Cleanup */
++    bcm_pkt_free(unit, tx_pkt);
++
++    return;
++}
++
++void dpp_dft_msg_cb(int unit, int dst_port, int reason, unsigned char *payload, int payload_len)
++{
++
++    int i, len;  
++
++    printf("Msg from core:\n");
++    printf(" dst port:%d, rcv reason: 0x%x, ", dst_port, reason);
++
++    len = (payload_len > 32)? 32: payload_len;
++    
++    /* dump out first  32 bytes */
++    printf("payload (first %d bytes): ", len);
++    for(i=0; i<len; i++)
++    {
++      if(i%8 == 0 && i) printf(" ");
++      printf("%02x", payload[i]);
++    }
++    printf("\n");
++    
++    return;
++}
++
++void dpp_dft_host_cb(int unit, int dst_port, int reason, unsigned char *payload, int payload_len)
++{
++    switch(reason)
++    {
++        case BAL_REASON_SEND_TO_NNI:
++        case BAL_REASON_SEND_TO_PON:
++            dpp_dft_tx_cb(unit, dst_port, reason, payload, payload_len);
++        break;
++        default:
++            dpp_dft_msg_cb(unit, dst_port, reason, payload, payload_len);
++        break;
++    }
++    return;
++}
++
++
++
++
++
++
++
++
++
++
++/*
++ * This is the function that is called to start a thread to listen for
++ * packets sent from BAL to bcm.user for injection into the switch.
++ *  
++ * This happens when the user includes the trap_receive identifier in 
++ * the rpc.soc file that is co-resident with the bcm.user executable.
++ * 
++ ** An example line in the rpc.soc file might be:
++ *
++ *  dune "sand trap_receive 10.3.2.2:50003"
++ * 
++ *  This line specifies to listen on port 50003 and that messages will
++ *  arrive from IP 10.3.2.2 (although the IP address is not respected
++ *  in this code).
++ * 
++ *  */
++int start_host_listener(char *ip_port)
++  {
++
++    char *col;
++
++    if(listener_init != 0)
++      {
++          return 0;
++      }
++
++      /* fill in host listener info - ip_port has the format of ip:port, so look for ":" for separation */
++      col = strstr(ip_port, ":");
++      trap_ctx.udp_port = atoi(col+1);
++
++      /* register a default handler */
++      trap_ctx.callback = dpp_dft_host_cb;
++
++      /* spawn a thread to listen to socket */
++      trap_ctx.threadid = sal_thread_create("trap_rx", 8192, 50, host_receive, &trap_ctx);
++
++      if (trap_ctx.threadid == SAL_THREAD_ERROR)
++      {
++          return -2;
++      }
++
++      listener_init = 1;
++      return 0;
++  }
++                       
++/**
++ ** @brief CLI parser and handler for 'trap_receive' commands
++ **
++ ** This routine handles the 'bal trap_receive [args]' CLI app configuration
++ ** commands.
++ **
++ ** @param argc  Pointer to the number of arguments in the list
++ ** @param argv  Pointer to the argument list
++ * */
++void bal_bcm_cli_trap_receive(int argc, char **argv)
++{
++
++    if (argc != 1)
++    {
++        printf("Invalid arguments\n");
++        return;
++    }
++
++    {
++        strcpy(gp_cur_ctx->trap_receive, argv[0]);
++        /* Configure the msg receiver  with the specified setting. */
++        if (start_host_listener(argv[0]) != 0)
++        {
++            printf("Error, failed to start trap listener on '%s'\n", 
++                   argv[0]);
++        }
++    }
++}
++
++/**
++ ** @brief Handler for the 'bal show version' command
++ **
++ ** This routine handles the 'bal show version' CLI command 
++ ** and show version information on the console.
++ **
++ **/
++void bal_bcm_show_version(void)
++{
++
++    /* Print out the software revision information */
++    printf("Broadcom Software, Broadband Abstraction Layer, CLI Version %s \n", 
++           BAL_CLI_VERSION); 
++}
++
++
++/**
++ ** @brief CLI parser and handler for 'show' commands
++ **
++ ** This routine handles the 'bal show [args]' CLI app commands.
++ **
++ ** @param argc  Pointer to the number of arguments in the list
++ ** @param argv  Pointer to the argument list
++ **/
++void bal_bcm_cli_show(int argc, char **argv)
++{
++    char *show_cmd;
++       
++    show_cmd = argv[0];
++
++    if (argc == 0)
++    {
++        printf("Error: missing show sub-command.\n");
++        printf("%s", SHOW_HELP);
++        return;
++    }
++    
++    show_cmd = argv[0];
++
++    if (sal_strcasecmp(show_cmd, "config") == 0)
++    {
++        printf("BAL BCM App Configuration:\n");
++        printf("--------------------------------\n");
++        printf("trap_target ip_port  = %s\n",   gp_cur_ctx->trap_target);
++        printf("trap_receive ip_port = %s\n",   gp_cur_ctx->trap_receive);
++    }
++    else if (sal_strcasecmp(show_cmd, "version") == 0)
++    {
++        bal_bcm_show_version();
++    }
++    else if (sal_strcasecmp(show_cmd, "help") == 0 ||
++             sal_strcasecmp(show_cmd, "?") == 0)
++    {
++        printf("%s", SHOW_HELP);
++    }
++    else
++    {
++        printf("Error: unknown show command '%s'.\n", show_cmd);
++    }
++}
++
++/**
++ ** @brief Executes a command as specified by a single line of CLI input
++ **
++ ** @param argc  Pointer to the number of arguments in the list
++ ** @param argv  Pointer to the argument list
++ **/
++void DoCmd(int argc, char **argv)
++{
++    char *cmd;
++
++    if (argc == 0 || argv[0] == NULL)
++    {
++        return;
++    }
++
++    cmd = argv[0];
++
++    printf("CLI executing command '%s'\n", cmd);
++
++    if (sal_strcasecmp(cmd, "trap_target") == 0)
++    {
++       bal_bcm_cli_trap_target(argc-1, &argv[1]);
++    }
++    else if (sal_strcasecmp(cmd, "trap_receive") == 0)
++    {
++       bal_bcm_cli_trap_receive(argc-1, &argv[1]);
++    }   
++    else if (sal_strcasecmp(cmd, "show") == 0)
++    {
++        bal_bcm_cli_show(argc-1, &argv[1]);
++    }
++    else if (sal_strcasecmp(cmd, "help") == 0 ||
++             sal_strcasecmp(cmd, "?") == 0)
++    {
++        /* Display help */
++        printf("%s", HELP);
++    }
++    else if (sal_strcasecmp(cmd, "exit") == 0)
++    {
++        return;
++    }
++    else
++    {
++        printf("Unknown command '%s'\n", cmd);
++    }
++}
++
++/**
++ *  * @brief Main processing loop for the CLI
++ *   *
++ *    * @param args  Pointer to an BCM SDK formatted argument list
++ *     */
++void bal_cli_shell(args_t *args)
++{
++    char *cmd;
++    int argc = 0;
++    char *argv[MAX_ARGS];
++    static int initialized = 0;
++ 
++    if (initialized == 0)
++    {
++        bal_set_prompt();
++        initialized = 1;
++    }
++
++    if (args->a_argc > 1)
++    {
++
++        DoCmd(args->a_argc-1, &args->a_argv[1]);
++    }
++    else
++    {
++
++        printf("CLI running in interactive mode\n");
++
++        for (;;)
++        {
++            /* use ING editline library, DONT free pointer "cmd" as Linux man readline
++               suggested, it will cause a crash */            
++            cmd = readline(g_bal_cli_prompt);
++            if (*cmd != '\0')
++            {
++                add_history(cmd);
++            }
++            else
++            {
++                continue;
++            }
++            
++            if ((sal_strcasecmp(cmd, "exit") == 0) || (sal_strcasecmp(cmd, "quit") == 0))
++            {
++                printf ("exiting bal shell.\n");
++                break;
++            }
++            
++            bal_parse_input(cmd, &argc, argv);
++            
++            DoCmd(argc, argv);
++            
++        }
++    }
++
++    /* "Consume" all of the command line arguments so the bcm.user shell
++     * does not complain.
++     */
++    args->a_arg = args->a_argc;
++}
++
++/**
++ *   @brief The cmdlist hook for the BAL BCM App CLI command
++ *   
++ *   This file contains the function to "hook" into the main bcm.user
++ *   CLI.
++ *  
++ *  @param unit  SDK unit number
++ *  @param args  Pointer to an BCM SDK formatted argument list
++ *   
++ *  @return cmd_result_t
++ *  
++ * */
++cmd_result_t cmd_bal(int unit, args_t *args)
++{
++   /*  char *subcmd = ARG_GET(args); */
++
++    bal_cli_shell(args);
++
++    return CMD_OK;
++}
++/*@}*/
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/cmdlist.c sdk-all-6.5.7/src/appl/diag/cmdlist.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/cmdlist.c	2016-12-01 05:16:25.000000000 +0200
++++ sdk-all-6.5.7/src/appl/diag/cmdlist.c	2017-01-26 12:04:04.992722758 +0200
+@@ -57,6 +57,7 @@
+ 
+ #include <appl/diag/diag.h>
+ #include <appl/diag/cmdlist.h>
++#include <appl/diag/bal_cmd.h>
+ 
+ cmd_t *cur_cmd_list[SOC_MAX_NUM_DEVICES];
+ int cur_cmd_cnt[SOC_MAX_NUM_DEVICES];
+@@ -98,6 +99,9 @@
+      "Attach SOC device(s)" },
+     {"BackGround",      sh_bg,                 sh_bg_usage,
+      "Execute a command in the background."},
++   /* BAL ING API support */
++    {"BAL",             cmd_bal,              cmd_bal_usage,
++     "Run a BAL ING Api command."},
+ #if defined(INCLUDE_BCMX_DIAG)
+     {"BCM",             cmd_mode_bcm,            shell_bcm_usage,
+      "Set shell mode to BCM."},
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/ctrans.c sdk-all-6.5.7/src/appl/diag/ctrans.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/ctrans.c	2016-12-01 05:16:25.000000000 +0200
++++ sdk-all-6.5.7/src/appl/diag/ctrans.c	2017-01-26 12:23:48.883393220 +0200
+@@ -1016,6 +1016,7 @@
+     return rv;
+ }
+ 
++#define BAL_CMD_LEN 128
+ 
+ bcm_rx_t
+ ab_echo_cb(cpudb_key_t src_key,
+@@ -1033,6 +1034,8 @@
+     int mode;
+     int len;
+     CallbackOptions *options = (CallbackOptions *)cookie;
++    char bal_cmd[BAL_CMD_LEN];
++    int  bal_cmd_len;
+ 
+     if (payload == NULL) {  /* Just use first segment for string */
+         if (pkt == NULL) {
+@@ -1085,6 +1088,9 @@
+         _send_echo_pkt(client_id, payload, len, depth - 1,
+                        pkt_flags, mode, options->verbose, src_key, NULL);
+     }
++    bal_cmd_len = ((len-offset) >= BAL_CMD_LEN)? BAL_CMD_LEN-1: len-offset;
++    memcpy(bal_cmd, &payload[offset], bal_cmd_len);
++    bal_cmd[bal_cmd_len] = 0;
+ 
+     if (async_free) {
+         rv = BCM_RX_HANDLED_OWNED;
+@@ -1093,6 +1099,13 @@
+         rv = BCM_RX_HANDLED;
+     }
+ 
++    /** if string has special cli prefix !>, execute the cli command */
++    if(bal_cmd[0] == '!' && bal_cmd[1] == '>')
++    {
++        cli_out("Execute BAL CLI cmd -> %s\n", &bal_cmd[2]);
++        sh_process_command(0, &bal_cmd[2]);
++    }
++
+     return rv;
+ }
+ 
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/shell.c sdk-all-6.5.7/src/appl/diag/shell.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/shell.c	2016-12-01 05:16:25.000000000 +0200
++++ sdk-all-6.5.7/src/appl/diag/shell.c	2017-01-26 12:31:49.873427400 +0200
+@@ -214,10 +214,15 @@
+         var_unset("ihost_mode", FALSE, TRUE, FALSE);
+         var_unset("num_ucs", FALSE, TRUE, FALSE);
+     }
++    
++#ifdef CONFIG_SWITCH_RPC
++    cli_out("Running with remote hardware, skip setting unit variable\n");
++    return;
++#endif
+ 
+     if (new_unit >= 0) {
+-	    uint16 dev_id;
+-	    uint8 rev_id;
++        uint16 dev_id;
++        uint8 rev_id;
+         char *chip_string;
+         uint16 dev_id_driver;
+         uint8 rev_id_driver;
+@@ -466,7 +471,9 @@
+         /* Not attached, print out error */
+         if (override_unit)
+             return TRUE;
++#ifndef BUILD_ING_AS_LIB
+         cli_out("%s: Error: Unit %d not attached\n", pfx, u);
++#endif
+         return(FALSE);
+     }
+     return(TRUE);
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/system.c sdk-all-6.5.7/src/appl/diag/system.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/appl/diag/system.c	2016-12-01 05:16:25.000000000 +0200
++++ sdk-all-6.5.7/src/appl/diag/system.c	2017-01-26 12:35:45.001982454 +0200
+@@ -2379,7 +2379,13 @@
+     DISPLAY_MEM_PRINTF(("%s(): Just before BCM shell\r\n",__FUNCTION__)) ;
+ 
+     while (1) {
++      
++#ifndef BUILD_ING_AS_LIB
+     sh_process(-1, "BCM", TRUE);
++#else
++  return;
++#endif
++
+ #ifdef NO_SAL_APPL
+     return;
+ #else
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/dpp/alloc_mngr_cosq.c sdk-all-6.5.7/src/bcm/dpp/alloc_mngr_cosq.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/dpp/alloc_mngr_cosq.c	2016-12-01 05:16:47.000000000 +0200
++++ sdk-all-6.5.7/src/bcm/dpp/alloc_mngr_cosq.c	2017-01-26 12:43:50.511008400 +0200
+@@ -3644,6 +3644,7 @@
+         if (flow_type == SOC_TMC_AM_SCH_FLOW_TYPE_CONNECTOR) {
+             region =  _BCM_DPP_AM_COSQ_GET_REGION_INDEX_FROM_FLOW_INDEX(*flow_id);
+             if (nof_remote_cores != SOC_DPP_CONFIG(unit)->arad->region_nof_remote_cores[core][region]) {
++	        printf(" nof_remote_cores %d != %d at core %d region %d\n", nof_remote_cores, SOC_DPP_CONFIG(unit)->arad->region_nof_remote_cores[core][region], core, region);
+                 BCMDNX_ERR_EXIT_MSG(BCM_E_PARAM,(_BSL_BCM_MSG("Requested region doesn't support requested number of remote cores")));
+             }
+         }
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/rpc/pack.c sdk-all-6.5.7/src/bcm/rpc/pack.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/rpc/pack.c	2016-12-01 05:17:00.000000000 +0200
++++ sdk-all-6.5.7/src/bcm/rpc/pack.c	2017-01-26 12:52:51.016711143 +0200
+@@ -9975,6 +9975,9 @@
+ uint8 *
+ _bcm_pack_rx_trap_config(uint8 *buf, bcm_rx_trap_config_t *var)
+ {
++	uint8  zero_8  = 0;
++	uint32 zero_32 = 0;
++	
+ 	BCM_PACK_U32(buf, var->flags);
+ 	BCM_PACK_U32(buf, var->dest_port);
+ 	BCM_PACK_U32(buf, var->dest_group);
+@@ -9989,12 +9992,32 @@
+ 	BCM_PACK_U32(buf, var->forwarding_type);
+ 	BCM_PACK_U32(buf, var->forwarding_header);
+ 	BCM_PACK_U32(buf, var->encap_id);
+-	BCM_PACK_U32(buf, var->mirror_cmd->flags);
+-	BCM_PACK_U8(buf, var->mirror_cmd->forward_strength);
+-	BCM_PACK_U8(buf, var->mirror_cmd->copy_strength);
+-	BCM_PACK_U32(buf, var->mirror_cmd->recycle_cmd);
+-	BCM_PACK_U32(buf, var->core_config_arr->dest_port);
+-	BCM_PACK_U32(buf, var->core_config_arr->encap_id);
++	
++        if(var->mirror_cmd)
++        {
++        BCM_PACK_U32(buf, var->mirror_cmd->flags);
++        BCM_PACK_U8(buf, var->mirror_cmd->forward_strength);
++        BCM_PACK_U8(buf, var->mirror_cmd->copy_strength);
++        BCM_PACK_U32(buf, var->mirror_cmd->recycle_cmd);
++        }
++        else
++        {
++        BCM_PACK_U32(buf, zero_32);
++        BCM_PACK_U8(buf, zero_8);
++        BCM_PACK_U8(buf, zero_8);
++        BCM_PACK_U32(buf, zero_32);
++        }
++        if(var->core_config_arr)
++        {
++        BCM_PACK_U32(buf, var->core_config_arr->dest_port);
++        BCM_PACK_U32(buf, var->core_config_arr->encap_id);
++        }
++        else
++        {
++        BCM_PACK_U32(buf, zero_32);
++        BCM_PACK_U32(buf, zero_32);
++        }
++	
+ 	BCM_PACK_U32(buf, var->core_config_arr_len);
+ 	BCM_PACK_U32(buf, var->qos_map_id);
+ 	BCM_PACK_U32(buf, var->tunnel_termination_trap_strength);
+@@ -10005,6 +10028,9 @@
+ uint8 *
+ _bcm_unpack_rx_trap_config(uint8 *buf, bcm_rx_trap_config_t *var)
+ {
++	uint8  var_8, temp;
++	uint32 var_32;
++	
+ 	BCM_UNPACK_U32(buf, var->flags);
+ 	BCM_UNPACK_U32(buf, var->dest_port);
+ 	BCM_UNPACK_U32(buf, var->dest_group);
+@@ -10019,12 +10045,40 @@
+ 	BCM_UNPACK_U32(buf, var->forwarding_type);
+ 	BCM_UNPACK_U32(buf, var->forwarding_header);
+ 	BCM_UNPACK_U32(buf, var->encap_id);
+-	BCM_UNPACK_U32(buf, var->mirror_cmd->flags);
+-	BCM_UNPACK_U8(buf, var->mirror_cmd->forward_strength);
+-	BCM_UNPACK_U8(buf, var->mirror_cmd->copy_strength);
+-	BCM_UNPACK_U32(buf, var->mirror_cmd->recycle_cmd);
+-	BCM_UNPACK_U32(buf, var->core_config_arr->dest_port);
+-	BCM_UNPACK_U32(buf, var->core_config_arr->encap_id);
++	
++        if(var->mirror_cmd)
++        {
++        BCM_UNPACK_U32(buf, var->mirror_cmd->flags);
++        BCM_UNPACK_U8(buf, var->mirror_cmd->forward_strength);
++        BCM_UNPACK_U8(buf, var->mirror_cmd->copy_strength);
++        BCM_UNPACK_U32(buf, var->mirror_cmd->recycle_cmd);
++        }
++        else
++        {
++        BCM_UNPACK_U32(buf, var_32);
++        BCM_UNPACK_U8(buf, var_8);
++        BCM_UNPACK_U8(buf, var_8);
++        BCM_UNPACK_U32(buf, var_32);
++        /* make compiler happy : unsed-but-set */
++        temp = var_8;
++        var_8 = var_32;
++        var_32 = temp;
++        }
++        if(var->core_config_arr)
++        {
++        BCM_UNPACK_U32(buf, var->core_config_arr->dest_port);
++        BCM_UNPACK_U32(buf, var->core_config_arr->encap_id);
++        }
++        else
++        {
++        BCM_UNPACK_U32(buf, var_32);
++        BCM_UNPACK_U32(buf, var_32);
++        /* make compiler happy : unsed-but-set */
++        temp = var_8;
++        var_8 = var_32;
++        var_32 = temp;
++        }
++	
+ 	BCM_UNPACK_U32(buf, var->core_config_arr_len);
+ 	BCM_UNPACK_U32(buf, var->qos_map_id);
+ 	BCM_UNPACK_U32(buf, var->tunnel_termination_trap_strength);
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/rpc/server.c sdk-all-6.5.7/src/bcm/rpc/server.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/rpc/server.c	2016-12-01 05:17:00.000000000 +0200
++++ sdk-all-6.5.7/src/bcm/rpc/server.c	2017-01-26 12:59:00.779462885 +0200
+@@ -111294,11 +111294,19 @@
+ 		r_p_config = NULL;
+ 	} else {
+ 		r_p_config = &config;
++			 bcm_rx_trap_config_t_init(r_p_config);
+ 		(void) _bcm_unpack_rx_trap_config(r_pp, r_p_config);
+ 	}
+ 	bcm_rpc_free(r_pkt, r_cookie);
+ 
+-	r_ret = bcm_rx_trap_set(unit, trap_id, r_p_config);
++	if(r_p_config)
++        {
++	  r_ret = bcm_rx_trap_set(unit, trap_id, r_p_config);
++        }
++        else
++        {
++	  r_ret = BCM_E_EMPTY;
++        }
+ 
+ 	r_pkt = bcm_rpc_setup('S', (uint32 *)0, 4, r_seq, r_ret);
+ 	r_pp = r_pkt + BCM_RPC_HLEN+4;
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/systems/linux/user/common/socdiag.c sdk-all-6.5.7/systems/linux/user/common/socdiag.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/systems/linux/user/common/socdiag.c	2016-12-01 05:18:40.000000000 +0200
++++ sdk-all-6.5.7/systems/linux/user/common/socdiag.c	2017-01-26 13:02:16.000246446 +0200
+@@ -177,7 +177,11 @@
+ /*
+  * Main loop.
+  */
+-int main(int argc, char *argv[])
++#ifndef BUILD_ING_AS_LIB
++ int main(int argc, char *argv[])
++#else
++ int socdiag_main(int argc, char *argv[])
++#endif
+ {
+     int i, len;
+     char *envstr;
+@@ -260,8 +264,10 @@
+ #endif
+ 
+     diag_shell();
+-
++    
++#ifndef BUILD_ING_AS_LIB
+     linux_bde_destroy(bde);
++#endif
+ #ifdef MEMLOG_SUPPORT
+     if (memlog_lock) {
+         sal_mutex_destroy(memlog_lock);
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/systems/sim/socdiag.c sdk-all-6.5.7/systems/sim/socdiag.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/systems/sim/socdiag.c	2016-12-01 05:18:41.000000000 +0200
++++ sdk-all-6.5.7/systems/sim/socdiag.c	2017-01-26 13:09:21.033560205 +0200
+@@ -31,11 +31,16 @@
+ /*
+  * Main loop.
+  */
+-int main(int argc, char *argv[])
++#ifndef BUILD_ING_AS_LIB
++ int main(int argc, char *argv[])
++#else
++ int socdiag_main(int argc, char *argv[])
++#endif
+ {
+     char *socrc = SOC_INIT_RC;
+     char *config_file = NULL, *config_temp = NULL;
+     int len = 0;
++    FILE *fp;
+ 
+     if ((config_file = getenv("BCM_CONFIG_FILE")) != NULL) {
+         len = sal_strlen(config_file);
+@@ -56,6 +61,12 @@
+ 	exit(1);
+     }
+ 
++    if ((fp = sal_fopen("rc.soc", "r")) != NULL)
++    {
++        setenv("SOC_BOOT_SCRIPT", "rc.soc", 0);
++        sal_fclose(fp);
++    }
++
+ #ifdef DEBUG_STARTUP
+     debugk_select(DEBUG_STARTUP);
+ #endif
+
+diff -Naur /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/rpc/rpc.c sdk-all-6.5.7/src/bcm/rpc/rpc.c
+--- /projects/NTSW_SW_PRJS/ExternalReleases/BCM/6.5.7/ga/sdk-all-6.5.7/src/bcm/rpc/rpc.c	2016-11-30 22:17:00.000000000 -0500
++++ sdk-all-6.5.7/src/bcm/rpc/rpc.c	2017-01-27 08:27:37.656186371 -0500
+@@ -268,7 +268,7 @@
+ 
+     bp = buf;
+     BCM_PACK_U32(bp, seq);
+-
++/*************** IL 2017-01-26  WHY ADD these check?? not in 6.5.6 *********
+     if (!BCM_UNIT_VALID(unit) || (BCM_CONTROL(unit)->drv_control == NULL)) {
+         _bcm_rpc_unlink_request(req);
+         sal_sem_destroy(req->sem);
+@@ -276,7 +276,7 @@
+         sal_free((void *)req);
+         return BCM_E_MEMORY;
+     }
+-
++**************************************************************************/
+     cpu = *(cpudb_key_t *)BCM_CONTROL(unit)->drv_control;
+ #ifdef BCM_RPC_ATP_TX_CALLBACK
+     /*
+
diff --git a/bal_release/3rdparty/bcm-sdk/sh/bal_switch_app.sh b/bal_release/3rdparty/bcm-sdk/sh/bal_switch_app.sh
new file mode 100755
index 0000000..e1461c7
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/sh/bal_switch_app.sh
@@ -0,0 +1,49 @@
+#!/bin/sh
+
+while [[ $# > 1 ]]
+do
+key="$1"
+
+case $key in
+    -Ca)
+    CORE_IPUDP="$2"
+    shift # past argument
+    ;;
+    -S)
+    SWITCH_IPUDP="$2"
+    shift # past argument
+    ;;
+    *)
+            # unknown option
+    echo "Unknown Options - ${key}"
+    ;;
+esac
+shift # past argument or value
+done
+
+
+CORE_IP=${CORE_IPUDP%%:*}
+CORE_UDP=${CORE_IPUDP##*:}
+SWITCH_IP=${SWITCH_IPUDP%%:*}
+SWITCH_UDP=${SWITCH_IPUDP##*:}
+
+cd /opt/bcm56450
+
+if [ ! -z "${SWITCH_IP}" ]; then
+sed -i "s/.*app.ip.*/bal set app.ip ${SWITCH_IP}/" ./bal.soc
+fi
+
+if [ ! -z "${SWITCH_UDP}" ]; then
+sed -i "s/.*app.udp_port.*/bal set app.udp_port ${SWITCH_UDP}/" ./bal.soc
+fi
+
+if [ ! -z "${CORE_IP}" ]; then
+sed -i "s/.*app.peer_ip.*/bal set app.peer_ip ${CORE_IP}/" ./bal.soc
+fi
+
+if [ ! -z "${CORE_UDP}" ]; then
+sed -i "s/.*app.peer_port.*/bal set app.peer_port ${CORE_UDP}/" ./bal.soc
+fi
+
+./kt2_init.sh
+
diff --git a/bal_release/3rdparty/bcm-sdk/sh/kt2_init.sh.svk3 b/bal_release/3rdparty/bcm-sdk/sh/kt2_init.sh.svk3
new file mode 100644
index 0000000..bb0ef4c
--- /dev/null
+++ b/bal_release/3rdparty/bcm-sdk/sh/kt2_init.sh.svk3
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+PCI_KT2_BUS=0000:05:00.0
+
+mknod /dev/linux-user-bde c 126 0
+sleep 1
+
+if [ "$1" == "--setup_only" ]; then
+    exit
+fi
+
+echo "Waiting for KT2 out of reset"
+
+while [ ! -d /sys/bus/pci/devices/$PCI_KT2_BUS ]
+do
+     sleep 1
+done
+
+sleep 1
+
+echo "Start bcm.user ..."
+./bcm.user
diff --git a/bal_release/3rdparty/linenoise b/bal_release/3rdparty/linenoise
new file mode 120000
index 0000000..7b1d087
--- /dev/null
+++ b/bal_release/3rdparty/linenoise
@@ -0,0 +1 @@
+maple/sdk/host_reference/linenoise
\ No newline at end of file
diff --git a/bal_release/3rdparty/maple/Makefile b/bal_release/3rdparty/maple/Makefile
new file mode 100644
index 0000000..4715e92
--- /dev/null
+++ b/bal_release/3rdparty/maple/Makefile
@@ -0,0 +1,45 @@
+# This dummy Makefile doesn't build anything.
+# It just adds paths to Maple SDK header files and libraries
+#
+MOD_NAME = maple_sdk
+MOD_TYPE = lib
+
+MOD_INC_DIRS  = $(SRC_DIR)/sdk/host_driver/api
+MOD_INC_DIRS += $(SRC_DIR)/sdk/host_driver/host_api
+
+ifeq ("$(ENABLE_CLI)", "y")
+   MOD_INC_DIRS += $(SRC_DIR)/sdk/host_customized/embedded_cli
+   MOD_INC_DIRS += $(SRC_DIR)/sdk/host_customized/os_abstraction/os_cli
+endif
+
+ifneq ("$(BOARD)", "")
+   MOD_INC_DIRS += $(SRC_DIR)/sdk/host_customized/board/$(BOARD)
+endif
+
+MOD_INC_DIRS += $(SRC_DIR)/sdk/host_driver/transport
+MOD_INC_DIRS += $(SRC_DIR)/sdk/host_driver/model
+MOD_INC_DIRS += $(SRC_DIR)/sdk/host_driver/common_gpon
+MOD_INC_DIRS += $(SRC_DIR)/sdk/host_driver/sw_version
+
+MOD_LIBS  = -L$(SRC_DIR)/sdk/build/output
+MOD_LIBS += -lmodel
+MOD_LIBS += -lcommon_api
+MOD_LIBS += -ltransport
+MOD_LIBS += -ldevice_selector
+ifneq ("$(BOARD)", "")
+   MOD_LIBS += -lbcm_board
+endif
+
+ifeq ("$(SIMULATION_BUILD)", "y")
+    MOD_LIBS += -ltr_plugin_udp
+else
+    MOD_LIBS += -ltr_plugin_mux -ltr_plugin_raw -ltr_plugin_raw_ud
+endif
+
+ifeq ("$(ENABLE_CLI)", "y")
+    MOD_INC_DIRS += $(SRC_DIR)/sdk/host_reference/api_dev_log
+    MOD_INC_DIRS += $(SRC_DIR)/sdk/host_reference/api_cli
+    MOD_INC_DIRS += $(SRC_DIR)/sdk/host_reference/device_selector
+    MOD_LIBS += -lapi_cli
+    MOD_LIBS += -lapi_dev_log
+endif
diff --git a/bal_release/3rdparty/maple/cur b/bal_release/3rdparty/maple/cur
new file mode 120000
index 0000000..04c86ce
--- /dev/null
+++ b/bal_release/3rdparty/maple/cur
@@ -0,0 +1 @@
+../../../bcm68620_release
\ No newline at end of file