/*
<:copyright-BRCM:2016:DUAL/GPL:standard

   Broadcom Proprietary and Confidential.(c) 2016 Broadcom
   All Rights Reserved

Unless you and Broadcom execute a separate written software license
agreement governing use of this software, this software is licensed
to you under the terms of the GNU General Public License version 2
(the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
with the following added to such license:

   As a special exception, the copyright holders of this software give
   you permission to link this software with independent modules, and
   to copy and distribute the resulting executable under terms of your
   choice, provided that you also meet, for each linked independent
   module, the terms and conditions of the license of that module.
   An independent module is a module which is not derived from this
   software.  The special exception does not apply to any modifications
   of the software.

Not withstanding the above, under no circumstances may you combine
this software in any way with any other Broadcom software provided
under a license other than the GPL, without Broadcom's express prior
written consent.

:>
 */
#include "bcmtr_pcie.h"
#include "bcmolt_tr_pcie_specific.h"


/*
    Synchronization flow of DMA data base between Host and Maple
    The process takes place after Maple is loaded and run from DDR.
    ========================================================
    Host                                              Maple
    ========================================================

    write to SRAM its TX and RX queue size
    write to SRAM DDR_FINISH indication
    wait for PRM_BIT from Maple                      run from DDR
                                                     get from SRAM host tx and rx queue size
                                                     calls pre_connect
                                                     write to SRAM opaque data
                                                     write to SRAM PRM_BIT
    read from SRAM opaque data                       calls connect
    clear PRM_BIT from Maple                         wait for PRM_BIT from Host
    calls pre_connect
    calls connect
    write to SRAM PRM_BIT
    register rx interrupt handler                    register rx interrupt handler
    ========================================================
          Both ready to send/receive packets thru DMA:
    ========================================================
*/
/* misc local_bd info structure
 _____________________________________________________
|___31 - 25_____|   24  |____23 -16_____|____15-0_____|
|__reserved_____|__OWN__|___chanal ID___|____length___|

*/
#define BCM_PCIED_BD_OWNERSHIP_SHIFT        24
#define BCM_PCIED_BD_OWNERSHIP_MASK         (0x1UL << BCM_PCIED_BD_OWNERSHIP_SHIFT)

#define BCM_PCIED_BD_CHANNEL_ID_SHIFT       16
#define BCM_PCIED_BD_CHANNEL_ID_MASK        (0xffUL << BCM_PCIED_BD_CHANNEL_ID_SHIFT)

#define BCM_PCIED_BD_PKT_LENGTH_MASK        0xffff

/* length_and_isrenable */
#define BCM_PCIED_INTR_ENABLE_SHIFT         31
#define BCM_PCIED_INTR_ENABLE_MASK          (0x1UL << BCM_PCIED_INTR_ENABLE_SHIFT)

#define BCM_PCIED_TRANSFER_SIZE_MASK        0x01ffffffUL
#define BCM_PCIED_TRANSFER_SIZE_SHIFT       0

/* last_next_indicator */
#define BCM_PCIED_LAST_RECORD_SHIFT         31
#define BCM_PCIED_LAST_RECORD_MASK          (0x1UL << BCM_PCIED_LAST_RECORD_SHIFT)


#define BCM_PCIED_NEXT_CONTINOUS_SHIFT      2
#define BCM_PCIED_NEXT_CONTINOUS_MASK       (0x1UL << BCM_PCIED_NEXT_CONTINOUS_SHIFT)

#define BCM_PCIE_ALL_DMA_INTERRUPTS_MASK    (DMA_RX_DONE_MASK | DMA_RX_ERROR_MASK | DMA_TX_DONE_MASK | DMA_TX_ERROR_MASK)

/* packet descriptor - used by HW DMA mechanism , defined by HW do not change it */
typedef struct
{
    uint32_t    ddr_buff_address_low;   /* Maple address - word[0]*/
    uint32_t    pcie_pkt_address_low;   /* Host address  - word[1]*/
    uint32_t    pcie_pkt_address_high;  /*               - word[2]*/
    uint32_t    length_and_isrenable;   /* bit 31 - interrupt enable; bits 24:2 - transfer length */
    uint32_t    last_next_indicator;    /* bit 31 - last indicator; bit 30 - direction; bit 2 - next descriptor, if 1 -> continuous */
    uint32_t    next_pd_address_low;
    uint32_t    next_pd_address_high;
    uint32_t    ddr_buff_address_high;  /*               - word[7]*/
} bcm_pcied_pd;

/* transfer unit for TX/RX */
typedef struct
{
    bcm_pcied_pd    data_pd;            /* PD used to transfer data packet */
    bcm_pcied_pd    remote_to_local_pd; /* PD used to transfer shadow_rbd field from local CPU
                                            to local_bd field on peer CPU   */
} bcm_pcied_tu;

/* opaque data, in current implementation will be sent from the Maple to Host only.
   Provide offsets from the start of Maple DDR window for tx and rx TU rings (where tx and rx rings in term of Host)
*/
struct bcmtr_pcie_opaque_data
{
    uint32_t    tx_tu_ring_offset;
    uint32_t    rx_tu_ring_offset;
};

/* main structure of the driver */
typedef struct
{
    bcm_pcied_tu        *tx_tu_ring;        /* TX DMA ring */
    bcm_pcied_tu        *rx_tu_ring;        /* RX DMA ring */

    uint32_t            *local_bd;          /* used for receive, updated by peer in tx */
    uint32_t            *shadow_rbd;         /* used by local in tx as just buffer for update remote local_bd */

    uint32_t            *tx_owner;          /* used for local in tx for lookup that tu mine, updated by local and peer */
    uint32_t            *peer_tx_owner;     /* used in rx for update tx_owner of the remote*/

    bcmos_buf           **tx_nbuff_save;    /* array of network buffers pointers, used by TX, to store sent buffers */
    bcmos_buf           **rx_nbuff_save;    /* array of network buffers pointers, used by RX, to store allocated for rx buffers */

    uint32_t            current_tx;         /* index of current tx tu */
    uint32_t            conf_tx;            /* index of the last reclaimed tx tu */
    uint32_t            current_rx;         /* index of current rx tu */
    int32_t             prev_tx;

    uint32_t            max_tx_index;
    uint32_t            max_rx_index;

    uint32_t            max_mtu;

    unsigned long       ddr_win_base;
    bcm_pcied_isr_data  isrdata;            /* includes pcie register base, id and irq number */

    TX_LOCKDEF

    /* counters  */
    uint32_t            rx_counter;
    uint32_t            tx_counter;
    uint32_t            rx_pcie_empty_counter;
    uint32_t            tx_pcie_full_counter;

    /* saved meta-data */
    uint32_t            txq_length;
    uint32_t            rxq_length;
    uint32_t            *tx_tu_ring_orig;   /* TX DMA ring */
    uint32_t            *rx_tu_ring_orig;   /* RX DMA ring */

} bcm_pcied_comm_data;

f_bcmtr_int bcmtr_pcie_rx_irq_handler;
f_bcmtr_int bcmtr_pcie_tx_irq_handler;

static void default_tx_done_callback(uint8_t device, bcmos_buf *buf);

static f_bcmtr_done tx_done_handler = default_tx_done_callback;

/* used for error messages */
#if defined(__KERNEL__)
#define pcie_print(fmt, args...) printk("%s: %d: " fmt, __FUNCTION__ , __LINE__, ##args)
#else
#define pcie_print bcmos_printf
#endif

#define LOCAL_OWNER           0
#define REMOTE_OWNER          1

#define INCREMENT_RECEIVED(device)      bcmtr_pcie_data[device].rx_counter++
#define INCREMENT_TRANSMITED(device)    bcmtr_pcie_data[device].tx_counter++

/* set next index into a DMA ring */
#define NEXT_INDEX(maxindex, index) \
do{                                 \
    index++;                        \
    if (index > maxindex)           \
        index = 0;                  \
} while(0)

/* calculate register address according to registers'base and offset */
#define PCI_REG_ADDRESS(reg)               (uint32_t *)(bcmtr_pcie_data[device].isrdata.pcie_reg_base + reg)

/* Just for avoid of using this "BCM_ERR_OK"  stupid  define , i can not understand how "error" can be "ok" (D.B.) */
#define BCMTR_SUCCESS  BCM_ERR_OK

#define BCMTR_PARANOID_CHECK()                 \
    do {                                       \
        if (!bcmtr_pcie_data)                  \
            return BCM_ERR_NORES;              \
        if (device >= bcmtr_max_devices_number)\
            return BCM_ERR_RANGE;              \
    } while(0)

#define BCMTR_PARANOID_CHECK_TYPE(t)           \
    do {                                       \
        if (!bcmtr_pcie_data)                  \
            return (t)BCM_ERR_NORES;           \
        if (device >= bcmtr_max_devices_number)\
            return (t)BCM_ERR_RANGE;           \
    } while(0)

#define BCMTR_PARANOID_CHECK_EXT()             \
    do {                                       \
        if (!bcmtr_pcie_data)                  \
            return BCM_ERR_NORES;              \
        if (device >= bcmtr_max_devices_number)\
            return BCM_ERR_RANGE;              \
        if (!bcmtr_pcie_data[device].isrdata.pcie_reg_base)\
            return BCM_ERR_NORES;              \
    } while(0)

    /* device data array */
static bcm_pcied_comm_data *bcmtr_pcie_data;

static uint32_t bcmtr_max_devices_number;

/* stop one dma engine */
static inline void stop_dma(uint8_t device)
{
    volatile uint32_t value;

    value = bcm_pci_read32(PCI_REG_ADDRESS((uint32_t)DESCRIPTOR_CONTROL));
    value &= ~DMA_TX_SW_DESC_LIST_CTRL_STS_TX_DMA_RUN_STOP_MASK;
    bcm_pci_write32(PCI_REG_ADDRESS(DESCRIPTOR_CONTROL), value);
}

/* Default tx-done callback */
static void default_tx_done_callback(uint8_t device, bcmos_buf *buf)
{
    bcmos_free(buf);
}

/* free all allocated buffers */
static bcmos_errno free_buffers(uint8_t device, const char *error_string)
{
    uint32_t i;
    bcm_pcied_comm_data *current_device = &bcmtr_pcie_data[device];

    pcie_print("%s", error_string);

    if (current_device->rx_nbuff_save)
    {
        for (i = 0; i < current_device->rxq_length; i++)
        {
            if (current_device->rx_nbuff_save[i])
                bcmos_buf_free(current_device->rx_nbuff_save[i]);
        }
        bcmos_free(current_device->rx_nbuff_save);
    }

    if (current_device->tx_nbuff_save)
    {
        for (i = 0; i < current_device->txq_length; i++)
        {
            if (current_device->tx_nbuff_save[i])
                bcmos_buf_free(current_device->tx_nbuff_save[i]);
        }
        bcmos_free(current_device->tx_nbuff_save);
    }

    if (current_device->local_bd)
        bcmos_dma_free(device, current_device->local_bd);

    if (current_device->shadow_rbd)
        bcmos_dma_free(device, current_device->shadow_rbd);

    DESTROY_TXLOCK(device);

    bcmtr_pcie_free_rings(device, current_device->tx_tu_ring_orig, current_device->rx_tu_ring_orig);

    memset(&bcmtr_pcie_data[device], 0, sizeof(bcm_pcied_comm_data));

    return BCM_ERR_NOMEM;
}

bcmos_errno bcmtr_pcie_init(uint8_t max_devices)
{
    bcmtr_max_devices_number = max_devices;

    bcmtr_pcie_data = (bcm_pcied_comm_data *)bcmos_calloc(bcmtr_max_devices_number * sizeof(bcm_pcied_comm_data));
    if (!bcmtr_pcie_data)
    {
        pcie_print("Driver cannot be initialized\n");
        return BCM_ERR_NOMEM;
    }

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_pre_connect(uint8_t device, const bcmtr_pcie_pre_connect_cfg *cfg, bcmtr_pcie_opaque_data *opaque_data)
{
    bcm_pcied_comm_data *current_device;
    bcmos_errno         ret_code;
    uint32_t            i;

    BCMTR_PARANOID_CHECK();

    if (!cfg)
    {
        pcie_print("Second parameter(config) is NULL pointer\n");
        return BCM_ERR_NULL;
    }

    if (!opaque_data)
    {
        pcie_print("Return area pointer(Third parameter) is NULL\n");
        return BCM_ERR_NULL;
    }

    current_device = &bcmtr_pcie_data[device];

    CREATE_TXLOCK(device);

    /* copy user's data to internal data base */
    current_device->txq_length              = cfg->txq_size;
    current_device->rxq_length              = cfg->rxq_size;
    current_device->max_tx_index            = cfg->txq_size - 1;
    current_device->max_rx_index            = cfg->rxq_size - 1;
    current_device->max_mtu                 = cfg->max_mtu;
    current_device->isrdata.device          = device;
    current_device->isrdata.rx_irq          = cfg->rx_irq;
    current_device->isrdata.pcie_reg_base   = cfg->pcie_reg_base;
    current_device->ddr_win_base            = cfg->ddr_win_base;
    current_device->prev_tx                 = -1;

    /**********************/
    /* allocate data base */
    /**********************/

    bcmtr_pcie_specific_init(current_device->isrdata.pcie_reg_base);

    ret_code =  bcmtr_create_tu_rings(current_device->txq_length, current_device->rxq_length,
                                     (void **)&current_device->tx_tu_ring, (void **)&current_device->rx_tu_ring,
                                     (void **)&current_device->tx_tu_ring_orig, (void **)&current_device->rx_tu_ring_orig,
                                     current_device->isrdata.pcie_reg_base);
    if (ret_code != BCMTR_SUCCESS)
    {
        pcie_print("Failed to create transfer unit rings : (error=%d)\n",ret_code);
        return ret_code;
    }

    /* allocate array of local_bd for RX chain */
    current_device->local_bd = (uint32_t *)bcmos_dma_alloc(device, sizeof(*current_device->local_bd) * current_device->rxq_length);
    if (!current_device->local_bd)
        return free_buffers(device, "Failed to allocate local_bd for RX ring\n");

     /* set remote side as owner for all local_bd */
    for (i = 0; i < current_device->rxq_length; i++)
        *(uint32_t*)(&current_device->local_bd[i])=
            BCMOS_ENDIAN_CPU_TO_LITTLE_U32((uint32_t)(REMOTE_OWNER << BCM_PCIED_BD_OWNERSHIP_SHIFT));

    /* allocate array of local_bd for TX chain */
    current_device->shadow_rbd = (uint32_t *)bcmos_dma_alloc(device, sizeof(*current_device->shadow_rbd) * current_device->txq_length);
    if (!current_device->shadow_rbd )
       return  free_buffers(device, "Failed to allocate shadow_rbd for TX ring\n");
    /* clear all shadow_rbd , actualy no need but suatble for debugging */
    memset(current_device->shadow_rbd, 0, sizeof(*current_device->shadow_rbd) * current_device->txq_length);

    /* allocate netowrk buffer pointers arraies */
    current_device->tx_nbuff_save = (bcmos_buf**)bcmos_calloc(sizeof(bcmos_buf*) * current_device->txq_length);
    if (!current_device->tx_nbuff_save)
        return free_buffers(device,"Failed to allocate array for TX buffers pointers\n");

    current_device->rx_nbuff_save = (bcmos_buf**)bcmos_calloc(sizeof(bcmos_buf*) * current_device->rxq_length);
    if (!current_device->rx_nbuff_save)
        return free_buffers(device, "Failed to allocate array for RX buffers pointers\n");

    /* update return value, cross tx and rx for peer
        If we do not allocate the corresponded area just send zero to peer for indicate it
    */
    if (current_device->tx_tu_ring)
        opaque_data->rx_tu_ring_offset = (unsigned long)current_device->tx_tu_ring - current_device->ddr_win_base;

    if (current_device->rx_tu_ring)
        opaque_data->tx_tu_ring_offset = (unsigned long)current_device->rx_tu_ring - current_device->ddr_win_base;

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_connect(uint8_t device, const bcmtr_pcie_opaque_data *opaque_data)
{
    uint32_t            i;
    bcm_pcied_comm_data *current_device;
    bcm_pcied_tu        *tu_ptr = NULL;
    uint8_t             *pkt_ptr;

    BCMTR_PARANOID_CHECK();

    current_device = &bcmtr_pcie_data[device];

    /* update local tu_rings pointers , no need cross since we already do in pre-connect
        update only not zero pointers */
    if (!current_device->rx_tu_ring)
        current_device->rx_tu_ring = (bcm_pcied_tu*)(opaque_data->rx_tu_ring_offset + current_device->ddr_win_base);
    else
    {
        /* set next to point to the beginning of the ring */
        tu_ptr = &current_device->rx_tu_ring[current_device->max_rx_index];
        bcm_pci_write32(&(tu_ptr->remote_to_local_pd.next_pd_address_low), (uint32_t)bcmos_virt_to_phys(current_device->rx_tu_ring));
    }

    if (!current_device->tx_tu_ring)
        current_device->tx_tu_ring = (bcm_pcied_tu*)(opaque_data->tx_tu_ring_offset + current_device->ddr_win_base);
    else
    {
        /* set next to point to the beginning of the ring */
        tu_ptr = &current_device->tx_tu_ring[current_device->max_tx_index];
        bcm_pci_write32(&(tu_ptr->remote_to_local_pd.next_pd_address_low), (uint32_t)bcmos_virt_to_phys(current_device->tx_tu_ring));
    }

    /* now all tu_rings allocated and synchronize  , time to set the tx_owner and peer_tx_owner */
    current_device->tx_owner      = (uint32_t*)((unsigned long)current_device->tx_tu_ring + sizeof(bcm_pcied_tu) * current_device->txq_length);
    current_device->peer_tx_owner = (uint32_t*)((unsigned long)current_device->rx_tu_ring + sizeof(bcm_pcied_tu) * current_device->rxq_length);

    /* preallocate rx net buffers */
    for (i = 0; i < current_device->rxq_length; i++)
    {
        current_device->rx_nbuff_save[i] = bcmos_buf_alloc(current_device->max_mtu);
        if (!current_device->rx_nbuff_save[i])
            return free_buffers(device, "Failed to allocate buffer for RX\n");
    }
    /**********************************************
    OK , now we are ready to initialize tu_rings
    NOTE: all stuff related to create rings (last_next_indicator,next_pd_address_lowr/high already
    done by bcmtr_create_tu_rings
    ***********************************************/

    /*Fill TX ring, fill only fields which I "know",
     all peer related pointers will be updated by peer */
    for (i = 0, tu_ptr = current_device->tx_tu_ring; i < current_device->txq_length; i++, tu_ptr++)
    {
        /* fill the remote_to_local_pd - only last indicator */
        if (i == current_device->max_tx_index)
            bcm_pci_write32(&(tu_ptr->remote_to_local_pd.last_next_indicator), BCM_PCIED_LAST_RECORD_MASK);
        else
            bcm_pci_write32(&(tu_ptr->remote_to_local_pd.last_next_indicator), (BCM_PCIED_LAST_RECORD_MASK | BCM_PCIED_NEXT_CONTINOUS_MASK));

        /************************
         fill data_pd
         - leave length_and_isrenable in zero , will be set during tx
         - leave source data buffer  pointers in zero, will be set in during tx
         - dest. data buffer will be set by peer
        *************************/

        /************************
         fill remote_to_local_pd
             dest. data buffer will be set by peer
        *************************/
        bcmtr_set_source_buffer_address((uint32_t *)&tu_ptr->remote_to_local_pd, &current_device->shadow_rbd[i]);

        /* set last indicator for the current tu */
        bcm_pci_write32(&tu_ptr->data_pd.last_next_indicator, BCM_PCIED_NEXT_CONTINOUS_MASK);
        bcm_pci_write32(&(tu_ptr->remote_to_local_pd.last_next_indicator), BCM_PCIED_NEXT_CONTINOUS_MASK);

        /* set the length and interrupt indicator  */
        bcm_pci_write32(&tu_ptr->remote_to_local_pd.length_and_isrenable, (BCM_PCIED_INTR_ENABLE_MASK | (sizeof(uint32_t) << BCM_PCIED_TRANSFER_SIZE_SHIFT)));
    }

    /*Fill RX ring, fill only fields which I "know",
     all peer related pointers will be updated by peer */
    for (i = 0, tu_ptr = current_device->rx_tu_ring; i < current_device->rxq_length; i++, tu_ptr++)
    {
        /* fill the remote_to_local_pd - only last indicator */
        if (i == current_device->max_rx_index)
            bcm_pci_write32(&(tu_ptr->remote_to_local_pd.last_next_indicator), BCM_PCIED_LAST_RECORD_MASK);
        else
            bcm_pci_write32(&(tu_ptr->remote_to_local_pd.last_next_indicator), (BCM_PCIED_LAST_RECORD_MASK | BCM_PCIED_NEXT_CONTINOUS_MASK));

        /************************
        fill data_pd
        - leave length_and_isrenable in zero , will be set  by peer during tx
        - leave source data buffer  pointers in zero, will be set by peer during tx
        *************************/

        /* take data pointer  from nbuf saved in rx_nbuff_save*/
        pkt_ptr = bcmos_buf_data(current_device->rx_nbuff_save[i]);

        /* invalidate cache for the data buffers */
        bcmos_prepare_for_dma_read(pkt_ptr, current_device->max_mtu);

        /* set destination data buffer */
        bcmtr_set_dest_buffer_address((uint32_t *)&tu_ptr->data_pd, pkt_ptr);

        /************************
            fill remote_to_local_pd
            - remote_to_local_pd.length_and_isrenable already set by peer
            - last_next_indicator will be set by peer during tx
        ************************/

        /* set destination for the BD */
        bcmtr_set_dest_buffer_address((uint32_t *)&tu_ptr->remote_to_local_pd, &current_device->local_bd[i]);

        /* set next PD next pd indicator for both parts of the transfer unit */
        bcm_pci_write32(&tu_ptr->data_pd.last_next_indicator,            BCM_PCIED_NEXT_CONTINOUS_MASK);
        bcm_pci_write32(&tu_ptr->remote_to_local_pd.last_next_indicator, BCM_PCIED_NEXT_CONTINOUS_MASK);

        /* set the length and interrupt indicator  */
        bcm_pci_write32(&tu_ptr->remote_to_local_pd.length_and_isrenable, (BCM_PCIED_INTR_ENABLE_MASK | (sizeof(uint32_t) << BCM_PCIED_TRANSFER_SIZE_SHIFT)));

    }
#ifndef SIMULATION_BUILD
    bcmtr_connect_isr(&current_device->isrdata);
#endif

    /* Clear and disable all interrupts at L2 */
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_MASK_SET), BCM_PCIE_ALL_DMA_INTERRUPTS_MASK);
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_CLEAR), BCM_PCIE_ALL_DMA_INTERRUPTS_MASK);

    /* Enable L2 interrupts at L1 */
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR1_MASK_CLEAR), PCIE_L2_INTR_MASK);

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_send(uint8_t device, uint8_t channel, bcmos_buf *net_buff)
{
    bcm_pcied_comm_data *current_device;
    bcm_pcied_tu        *current_tu;
    uint32_t            current_tx;
    uint32_t            next_tx;
    uint32_t            length;
    uint8_t             *pkt_ptr;
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK();

    if(!net_buff)
    {
        pcie_print("Network buffer is null\n");
        return BCM_ERR_NULL;
    }
#endif

    current_device = &bcmtr_pcie_data[device];

    length = bcmos_buf_length(net_buff);
    if((length > current_device->max_mtu) || (length == 0))
    {
        pcie_print("Packet length %d error (MTU=%d)\n", length, current_device->max_mtu);
        return BCM_ERR_RANGE;
    }

    LOCK_TX();

    current_tx = current_device->current_tx;

    /* check owner in tx_owner list*/
    if(bcm_pci_read32(&current_device->tx_owner[current_tx]) != LOCAL_OWNER)
    {
        UNLOCK_TX();
        bcmtr_pcie_data[device].tx_pcie_full_counter++;
        return BCM_ERR_QUEUE_FULL;
    }

    /* Do not forget change owner */
    bcm_pci_write32(&current_device->tx_owner[current_tx], REMOTE_OWNER);

    /* Prepare shadow_rbd */
    *(uint32_t*)(&current_device->shadow_rbd[current_tx])=
        BCMOS_ENDIAN_CPU_TO_LITTLE_U32((uint32_t)(length | channel << BCM_PCIED_BD_CHANNEL_ID_SHIFT | LOCAL_OWNER << BCM_PCIED_BD_OWNERSHIP_SHIFT));

    current_tu = &current_device->tx_tu_ring[current_tx];

    /* take data buffer from nbuffer */
    pkt_ptr = bcmos_buf_data(net_buff);

    /* set data_pd destination data buffer*/
    bcmtr_set_source_buffer_address((uint32_t *)&current_tu->data_pd, pkt_ptr);

#ifndef HARDWARE_TEST1
    /* flush the cashe for the data buffer */
    bcmos_prepare_for_dma_write(pkt_ptr, length);
#endif

    /* set data_pd length_and_isrenable (no need enable interrupt for data_pd */
    bcm_pci_write32(&current_tu->data_pd.length_and_isrenable, length << BCM_PCIED_TRANSFER_SIZE_SHIFT);

    /* set 'last_indicator' bit into current TU, takes care of wrapping */
    if(current_tx == current_device->max_tx_index)
        bcm_pci_write32(&current_tu->remote_to_local_pd.last_next_indicator, BCM_PCIED_LAST_RECORD_MASK);
    else
        bcm_pci_write32(&current_tu->remote_to_local_pd.last_next_indicator, BCM_PCIED_LAST_RECORD_MASK | BCM_PCIED_NEXT_CONTINOUS_MASK);

    bcmos_barrier();

    /* clear 'last_indicator' bit into previous_TU, takes care of wrapping */
    if (current_device->prev_tx != current_device->max_tx_index)
        bcm_pci_write32(&(current_device->tx_tu_ring[current_device->prev_tx].remote_to_local_pd.last_next_indicator), BCM_PCIED_NEXT_CONTINOUS_MASK);
    else
        bcm_pci_write32(&(current_device->tx_tu_ring[current_device->prev_tx].remote_to_local_pd.last_next_indicator), 0);

    bcmos_barrier();

    /* set WAKE bit in DMA registers */
    bcm_pci_write32(PCI_REG_ADDRESS(WAKEUP_DMA), DMA_TX_WAKE_CTRL_WAKE_MASK);

    INCREMENT_TRANSMITED(device);

    next_tx = current_tx + 1;
    if (next_tx > current_device->max_tx_index)
        next_tx = 0;

#ifndef HARDWARE_TEST1
    /* release previous network buffer */
    if (current_device->tx_nbuff_save[current_tx])
    {
        tx_done_handler(device, current_device->tx_nbuff_save[current_tx]);
        current_device->conf_tx = next_tx;
    }

    /* store network buffer pointer */
    current_device->tx_nbuff_save[current_device->current_tx] = net_buff;
#endif
    /* move current_tx index */
    current_device->prev_tx = (int32_t)current_device->current_tx;
    current_device->current_tx = next_tx;

    UNLOCK_TX();
    return BCMTR_SUCCESS;
}

/** Reclaim buffers that have already been transmitted
 * \param[in]   device    Maple device index
 * \returns: number of reclaimed TX buffers >= 0 or bcmos_errno error code <0
 */
int bcmtr_pcie_tx_collect(uint8_t device)
{
    bcm_pcied_comm_data *current_device;
    uint32_t            conf_tx;
    int n = 0;

#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_TYPE(int);
#endif

    current_device = &bcmtr_pcie_data[device];

    LOCK_TX();

    conf_tx = current_device->conf_tx;
    while (bcm_pci_read32(&current_device->tx_owner[conf_tx]) == LOCAL_OWNER &&
           current_device->tx_nbuff_save[conf_tx])
    {
        ++n;

        /* release previous network buffer */
        tx_done_handler(device, current_device->tx_nbuff_save[conf_tx]);
        current_device->tx_nbuff_save[conf_tx] = NULL;

        conf_tx++;
        if (conf_tx > current_device->max_tx_index)
            conf_tx = 0;
    }
    current_device->conf_tx = conf_tx;

    UNLOCK_TX();

    return n;
}

/*
    Receive a data packet
    returns channel and pointer to network buffer containing the data
*/
bcmos_errno bcmtr_pcie_receive(uint8_t device, uint8_t *channel, bcmos_buf **buf)
{
    bcm_pcied_comm_data *current_device;
    bcm_pcied_tu        *current_tu;
    uint32_t            bd_info;
    uint32_t            length;
    uint32_t            current_rx;

#ifndef HARDWARE_TEST1
    bcmos_buf           *net_ptr = NULL;
    uint8_t             *pkt_ptr = NULL;
#endif

#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
    if (!channel || !buf)
        return BCM_ERR_NULL;
#endif
    *buf = NULL;

    current_device = &bcmtr_pcie_data[device];

    current_rx = current_device->current_rx;
    current_tu = &current_device->rx_tu_ring[current_rx];

    /* Read local_bd to local variable */
    bd_info = BCMOS_ENDIAN_LITTLE_TO_CPU_U32(*(uint32_t*)(&current_device->local_bd[current_rx]));

    /* check owner in local_bd, it is updated by the peer */
    if ((bd_info & BCM_PCIED_BD_OWNERSHIP_MASK) >> BCM_PCIED_BD_OWNERSHIP_SHIFT != LOCAL_OWNER)
    {
        bcmtr_pcie_data[device].rx_pcie_empty_counter++;
        return BCM_ERR_QUEUE_EMPTY;
    }

    /* change the owner in local_bd to the remote side */
    *(uint32_t*)(&current_device->local_bd[current_rx])=
        BCMOS_ENDIAN_CPU_TO_LITTLE_U32((uint32_t)((REMOTE_OWNER << BCM_PCIED_BD_OWNERSHIP_SHIFT) | bd_info));

    /* take the  packet length from local_bd */
    length = bd_info & BCM_PCIED_BD_PKT_LENGTH_MASK;

    if ((length == 0) || (length > current_device->max_mtu))
    {
        pcie_print("Packet length error : %d\n", length);

        /* update remote side */
        bcm_pci_write32(&current_device->peer_tx_owner[current_rx], LOCAL_OWNER);

        /* move current rx */
        NEXT_INDEX(current_device->max_rx_index, current_device->current_rx);

        return BCM_ERR_MSG_ERROR;
    }

    /* update packet channel id */
    *channel = (bd_info & BCM_PCIED_BD_CHANNEL_ID_MASK) >> BCM_PCIED_BD_CHANNEL_ID_SHIFT;

#ifndef HARDWARE_TEST1
    /* allocate new buffer to receive packet */
    net_ptr = bcmos_buf_alloc(current_device->max_mtu);

    /* If not successes do clean-up */
    if (!net_ptr)
    {
        /* update remote side */
        bcm_pci_write32(&current_device->peer_tx_owner[current_rx], LOCAL_OWNER);

        /* move current rx */
        NEXT_INDEX(current_device->max_rx_index, current_device->current_rx);

        return BCM_ERR_NOMEM;
    }
#endif
    /* take the data pointer */
    *buf = current_device->rx_nbuff_save[current_rx];

    /* invalidate received network buffer for cache */
    bcmos_prepare_for_dma_read(bcmos_buf_data(*buf), length);

    /* fill network buffer */
    bcmos_buf_length_set(*buf, length);

    /* update statistics */
    INCREMENT_RECEIVED(device);

#ifndef HARDWARE_TEST1
    pkt_ptr = bcmos_buf_data(net_ptr);

    /* invalidate network buffer for cache */
    bcmos_prepare_for_dma_read(pkt_ptr, current_device->max_mtu);

    /* update rx network buffer with the new packet */
    current_device->rx_nbuff_save[current_rx] = net_ptr;

    /* set data_pd destination data buffer*/
    bcmtr_set_dest_buffer_address((uint32_t *)&current_tu->data_pd, pkt_ptr);
#endif
    /* update remote side */
    bcm_pci_write32(&current_device->peer_tx_owner[current_rx], LOCAL_OWNER);

    /* move current rx */
    NEXT_INDEX(current_device->max_rx_index, current_device->current_rx);

    return BCMTR_SUCCESS;
}

/* enable level 2 RX interrupts */
bcmos_errno bcmtr_pcie_rxint_enable(uint8_t device)
{
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
#endif
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_MASK_CLEAR), DMA_RX_ERROR_MASK | DMA_RX_DONE_MASK);

    return BCMTR_SUCCESS;
}

/* disable level 2 RX interrupts */
bcmos_errno bcmtr_pcie_rxint_disable(uint8_t device)
{
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
#endif
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_MASK_SET), DMA_RX_ERROR_MASK | DMA_RX_DONE_MASK);

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_rxint_clear(uint8_t device)
{
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
#endif
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_CLEAR), DMA_RX_ERROR_MASK | DMA_RX_DONE_MASK);

    return BCMTR_SUCCESS;
}

/* Enable Level 2 "TX handled" interrupt */
bcmos_errno bcmtr_pcie_txint_enable(uint8_t device)
{
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
#endif
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_MASK_CLEAR), DMA_TX_ERROR_MASK | DMA_TX_DONE_MASK);

    return BCMTR_SUCCESS;
}

/* Disable level 2 "TX handled" interrupt */
bcmos_errno bcmtr_pcie_txint_disable(uint8_t device)
{
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
#endif
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_MASK_SET), DMA_TX_ERROR_MASK | DMA_TX_DONE_MASK);

    return BCMTR_SUCCESS;
}

/* Clear level 2 "TX handled" interrupt */
bcmos_errno bcmtr_pcie_txint_clear(uint8_t device)
{
#ifdef CHECK_PARAM
    BCMTR_PARANOID_CHECK_EXT();
#endif
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR_CLEAR), DMA_TX_ERROR_MASK | DMA_TX_DONE_MASK);

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_disconnect(uint8_t device)
{
    BCMTR_PARANOID_CHECK_EXT();

    stop_dma(device);

    /* disable interrupts */
    bcmtr_pcie_rxint_disable(device);
    bcmtr_pcie_txint_disable(device);

    /* clear DMA interrupts */
    bcmtr_pcie_rxint_clear(device);
    bcmtr_pcie_txint_clear(device);

    /* Disable in L1 controller */
    bcm_pci_write32(PCI_REG_ADDRESS(DMA_INTR1_MASK_SET), PCIE_L2_INTR_MASK);

    /* free irq - on host (if it is shared) must not free it */
    bcmtr_pcie_free_irq(bcmtr_pcie_data[device].isrdata.rx_irq, &bcmtr_pcie_data[device].isrdata);

    free_buffers(device, "PCIE disconnected\n");

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_rx_irq_cblk_register(f_bcmtr_int rx_isr_clbk)
{
    bcmtr_pcie_rx_irq_handler = rx_isr_clbk;

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_rx_irq_cblk_unregister(void)
{
    bcmtr_pcie_rx_irq_handler = NULL;

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_tx_irq_cblk_register(f_bcmtr_int rx_isr_clbk)
{
    bcmtr_pcie_tx_irq_handler = rx_isr_clbk;

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_tx_irq_cblk_unregister(void)
{
    bcmtr_pcie_tx_irq_handler = NULL;

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_tx_done_cblk_register(f_bcmtr_done tx_done_cb)
{
    tx_done_handler = tx_done_cb;

    return BCMTR_SUCCESS;
}

bcmos_errno bcmtr_pcie_tx_done_cblk_unregister(void)
{
    tx_done_handler = default_tx_done_callback;

    return BCMTR_SUCCESS;
}

void bcmtr_pcie_exit(void)
{
    uint32_t i;

    if (bcmtr_pcie_data)
    {
        for (i = 0; i < bcmtr_max_devices_number; i ++)
        {
            bcmtr_pcie_disconnect(i);
        }
        bcmos_free(bcmtr_pcie_data);
    }
    bcmtr_pcie_data = NULL;
}

bcmos_errno bcmtr_pcie_get_statistics(uint8_t device, uint32_t clear, bcm_pcied_stat *stat)
{
    bcm_pcied_comm_data *current_device = &bcmtr_pcie_data[device];

    BCMTR_PARANOID_CHECK();

   if (!stat)
       return BCM_ERR_NULL;

    stat->rx_counter    = current_device->rx_counter;
    stat->tx_counter    = current_device->tx_counter;
    stat->rx_done_isr_counter   = current_device->isrdata.rx_done_num;
    stat->rx_err_isr_counter   = current_device->isrdata.rx_err_num;
    stat->tx_done_isr_counter   = current_device->isrdata.tx_done_num;
    stat->tx_err_isr_counter   = current_device->isrdata.tx_err_num;
    stat->rx_pcie_empty_counter  = current_device->rx_pcie_empty_counter;
    stat->tx_pcie_full_counter  = current_device->tx_pcie_full_counter;
    if (clear)
    {
        current_device->rx_counter       = 0;
        current_device->tx_counter       = 0;
        current_device->isrdata.rx_done_num = 0;
        current_device->isrdata.rx_err_num  = 0;
        current_device->isrdata.tx_done_num = 0;
        current_device->isrdata.tx_err_num  = 0;
        current_device->rx_pcie_empty_counter = 0;
        current_device->tx_pcie_full_counter = 0;
    }

    return BCMTR_SUCCESS;
}

/*=============================================*/

/* used by dump procedures - may write to std output or user buffer */
#define pcie_bprint(buffer, fmt, args...)  \
    {\
      if (!buffer)\
        pcie_print(fmt, ##args);\
      else\
        sprintf(buffer, fmt, ##args);\
    }

static inline void dump_bd(char *output, char *title, uint32_t bd)
{
    uint32_t owner, chn, length;

    owner = (bd & BCM_PCIED_BD_OWNERSHIP_MASK) >> BCM_PCIED_BD_OWNERSHIP_SHIFT;
    chn = (bd & BCM_PCIED_BD_CHANNEL_ID_MASK) >> BCM_PCIED_BD_CHANNEL_ID_SHIFT;
    length = bd & BCM_PCIED_BD_PKT_LENGTH_MASK;

    pcie_bprint(output, "\t%s: (0x%08x) owner = %s channel = 0x%x(%d) length = 0x%x(%d)\n",
        title, (unsigned int)bd, owner == 0 ? "local" : "peer", (unsigned int)chn, chn, (unsigned int)length, length);
}

static inline void dump_owner(char *output, char *title, uint32_t *current_entry)
{
    uint32_t owner, entry;

    entry = bcm_pci_read32(current_entry);
    owner = (entry & BCM_PCIED_BD_OWNERSHIP_MASK) >> BCM_PCIED_BD_OWNERSHIP_SHIFT;
    pcie_bprint(output, "\t%s: owner = %s\n", title, owner == 0 ? "local" : "peer");
}

static inline void dump_pd(char *output, bcm_pcied_pd *current_pd)
{
    uint32_t ddrl,ddrh,pktl,pkth,len,last,nextl,nexth;

    ddrl  = bcm_pci_read32((uint32_t *)&current_pd->ddr_buff_address_low);
    pktl  = bcm_pci_read32((uint32_t *)&current_pd->pcie_pkt_address_low);
    pkth  = bcm_pci_read32((uint32_t *)&current_pd->pcie_pkt_address_high);
    len   = bcm_pci_read32((uint32_t *)&current_pd->length_and_isrenable);
    last  = bcm_pci_read32((uint32_t *)&current_pd->last_next_indicator);
    nextl = bcm_pci_read32((uint32_t *)&current_pd->next_pd_address_low);
    nexth = bcm_pci_read32((uint32_t *)&current_pd->next_pd_address_high);
    ddrh  = bcm_pci_read32((uint32_t *)&current_pd->ddr_buff_address_high);

    pcie_bprint(output,
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n"
                "\t\t%-20s = 0x%08x\n",
                "ddr_low", ddrl,
                "pkt_low", pktl,
                "pkt_high", pkth,
                "length_and_isrenable", len,
                "last_next_indicator", last,
                "next_low", nextl,
                "next_high", nexth,
                "ddr_high", ddrh);
}


static int32_t dump_one_tx(char *output, uint8_t device, uint32_t current_index)
{
    bcm_pcied_tu        *current_tu;
    bcm_pcied_comm_data *current_device;
    char                *buffer = output;

    current_device = &bcmtr_pcie_data[device];
    current_tu = &current_device->tx_tu_ring[current_index];
    dump_bd(buffer, "SBD", BCMOS_ENDIAN_LITTLE_TO_CPU_U32(*(uint32_t*)&current_device->shadow_rbd[current_index]));
    if (buffer)
        buffer += strlen(buffer);

    dump_owner(buffer, "tx_owner", &current_device->tx_owner[current_index]);
    if (buffer)
        buffer += strlen(buffer);

    pcie_bprint(buffer, "\tPD data = 0x%lx\n", (unsigned long)&current_tu->data_pd);
    if (buffer)
        buffer += strlen(buffer);

    dump_pd(buffer, &current_tu->data_pd);
    if (buffer)
        buffer += strlen(buffer);

    pcie_bprint(buffer, "\tPD shadow_rbd = 0x%lx\n", (unsigned long)&current_tu->remote_to_local_pd);
    if (buffer)
        buffer += strlen(buffer);

    dump_pd(buffer, &current_tu->remote_to_local_pd);
    if (buffer)
        buffer += strlen(buffer);

    pcie_bprint(buffer, "\tTX netbuff = 0x%lx\n",(unsigned long)current_device->tx_nbuff_save[current_index]);

    if (output)
        return strlen(output);

    return 0;
}

static int32_t dump_one_rx(char *output, uint8_t device, uint32_t current_index)
{
    bcm_pcied_tu        *current_tu;
    bcm_pcied_comm_data *current_device;
    char                *buffer = output;

    current_device = &bcmtr_pcie_data[device];
    current_tu = &current_device->rx_tu_ring[current_index];

    dump_bd(buffer, "BD", BCMOS_ENDIAN_LITTLE_TO_CPU_U32(*(uint32_t*)&current_device->local_bd[current_index]));
    if (buffer)
        buffer += strlen(buffer);

    dump_owner(buffer, "peer_tx_owner", &current_device->peer_tx_owner[current_index]);
    if (buffer)
        buffer += strlen(buffer);

    pcie_bprint(buffer, "\tPD data = 0x%lx\n", (unsigned long)&current_tu->data_pd);
    if (buffer)
        buffer += strlen(buffer);

    dump_pd(buffer, &current_tu->data_pd);
    if (buffer)
        buffer += strlen(buffer);

    pcie_bprint(buffer, "\tPD shadow_rbd = 0x%lx\n", (unsigned long)&current_tu->remote_to_local_pd);
    if (buffer)
        buffer += strlen(buffer);

    dump_pd(buffer, &current_tu->remote_to_local_pd);
    if (buffer)
        buffer += strlen(buffer);

    pcie_bprint(buffer, "\tRX netbuff = 0x%lx\n",(unsigned long)current_device->rx_nbuff_save[current_index]);

    if (output)
        return strlen(output);
    return 0;
}

bcmos_errno bcmtr_pcie_tx_dump(char *output, uint8_t device, int32_t start, int32_t number_of_entries)
{
    int32_t i;
    int32_t len = 0;
    char *buffer = output;
    int32_t from = start;
    int32_t to;

    pcie_bprint(buffer, "Dump Tx ring\n");
    if (!bcmtr_pcie_data)
    {
        pcie_print("Driver is not initialized\n");
        return BCM_ERR_NORES;
    }

    if (device >= bcmtr_max_devices_number)
    {
        pcie_print("Device parameter is greater than maximum devices(%d)\n", bcmtr_max_devices_number);
        return BCM_ERR_RANGE;
    }

    if (device != bcmtr_pcie_data[device].isrdata.device)
    {
        pcie_print("*** Data Corrupted ***\n");
        return BCM_ERR_RANGE;
    }

    if (start == -1) /* from current, number of entries */
        from = bcmtr_pcie_data[device].current_tx;

    to = from + number_of_entries;

    if (to == from)
        to++;

    if (to > bcmtr_pcie_data[device].txq_length)
        to = bcmtr_pcie_data[device].txq_length;

    if (buffer)
        len = strlen(buffer);

    for (i = from; i < to; i++)
    {
        if (buffer)
            buffer = output + len; /* move buffer to the next space */

        if (i == bcmtr_pcie_data[device].current_tx)
        {
            pcie_bprint(buffer, "Current = %d\n", i);
        }
        else
        {
            pcie_bprint(buffer, "Index = %d\n", i);
        }

        if (buffer)
        {
            /* add to len the next line - buffer contains only the last line */
            len += strlen(buffer);
            buffer = output + len;
        }
        /* returns the length of the last lines */
        len += dump_one_tx(buffer, device, i);
    }

    return BCM_ERR_OK;
}

bcmos_errno bcmtr_pcie_rx_dump(char *output, uint8_t device, int32_t start, int32_t number_of_entries)
{
    int32_t i;
    int32_t len = 0;
    char *buffer = output;
    int32_t from = start;
    int32_t to;

    pcie_bprint(buffer, "Dump Rx ring\n");
    if (!bcmtr_pcie_data)
    {
        pcie_print("Driver is not initialized\n");
        return BCM_ERR_NORES;
    }

    if (device >= bcmtr_max_devices_number)
    {
        pcie_print("Device parameter is greater than maximum devices(%d)\n", bcmtr_max_devices_number);
        return BCM_ERR_RANGE;
    }

    if (device != bcmtr_pcie_data[device].isrdata.device)
    {
        pcie_print("*** Data Corrupted ***\n");
        return BCM_ERR_RANGE;
    }

    if (start == -1) /* from current number of entries */
        from = bcmtr_pcie_data[device].current_rx;
    to = from + number_of_entries;
    if (to == from)
        to++;
    if (to > bcmtr_pcie_data[device].rxq_length)
        to = bcmtr_pcie_data[device].rxq_length;

    if (buffer)
        len = strlen(buffer);
    for (i = from; i < to; i++)
    {
        if (buffer)
            buffer = output + len;
        if (i == bcmtr_pcie_data[device].current_rx)
        {
            pcie_bprint(buffer, "Current = %d\n", i);
        }
        else
        {
            pcie_bprint(buffer, "Index = %d\n", i);
        }
        if (buffer)
        {
            /* add to len the next line - buffer contains only the last line */
            len += strlen(buffer);
            buffer = output + len;
        }
        /* returns the length of the last lines */
        len += dump_one_rx(buffer, device, i);
    }

    return BCM_ERR_OK;
}

#ifdef __KERNEL__
EXPORT_SYMBOL(bcmtr_pcie_receive);
EXPORT_SYMBOL(bcmtr_pcie_init);
EXPORT_SYMBOL(bcmtr_pcie_exit);
EXPORT_SYMBOL(bcmtr_pcie_pre_connect);
EXPORT_SYMBOL(bcmtr_pcie_connect);
EXPORT_SYMBOL(bcmtr_pcie_disconnect);
EXPORT_SYMBOL(bcmtr_pcie_rx_irq_cblk_register);
EXPORT_SYMBOL(bcmtr_pcie_rx_irq_cblk_unregister);
EXPORT_SYMBOL(bcmtr_pcie_tx_irq_cblk_register);
EXPORT_SYMBOL(bcmtr_pcie_tx_irq_cblk_unregister);
EXPORT_SYMBOL(bcmtr_pcie_send);
EXPORT_SYMBOL(bcmtr_pcie_tx_dump);
EXPORT_SYMBOL(bcmtr_pcie_rx_dump);
EXPORT_SYMBOL(bcmtr_pcie_rxint_enable);
EXPORT_SYMBOL(bcmtr_pcie_rxint_disable);
EXPORT_SYMBOL(bcmtr_pcie_rxint_clear);
EXPORT_SYMBOL(bcmtr_pcie_rx_irq_handler);
EXPORT_SYMBOL(bcmtr_pcie_tx_irq_handler);
EXPORT_SYMBOL(bcmtr_pcie_get_statistics);
#endif