diff --git a/logging/centralised_log_analysis.rst b/logging/centralised_log_analysis.rst
new file mode 100644
index 0000000..9d45dec
--- /dev/null
+++ b/logging/centralised_log_analysis.rst
@@ -0,0 +1,119 @@
+Centralized Log Analysis
+========================
+
+Objective
+---------
+
+Operators should be able to view logs from all the VOLTHA components as
+well as from whitebox OLT devices in a single stream.
+
+Solution Approach For Voltha Ecosystem
+--------------------------------------
+
+The solution we have chosen EFK (elasticsearch, kibana and
+fluentd-elasticsearch) setup for voltha enables the Operator to push
+logs from all VOLTHA components.
+
+Kind-Voltha script enables Operator to setup EFK with minimal
+configuration.The configuration set for EFK in minimal-values.yaml or
+full-values.yaml start efk stack with a single node elasticsearch and
+kibana instance will be deployed and a fluentd-elasticsearch pod will be
+deployed on each node that allows workloads to be scheduled.If you have
+the prerequisites installed, just execute
+
+.. code:: bash
+
+   $ DEPLOY\_K8S=y WITH\_BBSIM=y WITH\_EFK=y ./voltha up
+
+and the minimal cluster with efk should start.
+
+The number of deployed Pods will be dependent on the value of Deployment
+Type and SCHEDULE\_ON\_CONTROL\_NODES flag as shown in the below table.
+
+.. figure:: ../_static/fluentd-pods.png
+   :width: 6.50000in
+   :height: 1.50000in
+
+To remove voltha efk use DEPLOY\_K8S=y ./voltha down or, to avoid
+removing the k8s cluster DEPLOY\_K8S=n WITH\_EFK=y ./voltha down
+
+**To start using Kibana, In your browser ,navigate to
+http://<k8s\_node\_ip>:<exposed\_port>.** Then you can search for events
+in the *Discover* section.
+
+Solution Approach For Whitebox OLT Device
+-----------------------------------------
+
+The solution approach we have chosen is to install td-agent (fluentd
+variant) directly on OLT device for capturing and transmitting logs to
+elasticsearch pod running in voltha cluster.
+
+Created custom td-agent configuration file to handle the format of
+involved log files using right input plugins for openolt process, dev
+mgmt daemon, system logs and elasticsearch output plugin.You can find
+custom td-agent configuration file in
+`*https://github.com/opencord/openolt/tree/master/logConf* <https://github.com/opencord/openolt/tree/master/logConf>`__
+and find installation steps in
+`*https://github.com/opencord/openolt/tree/master* <https://github.com/opencord/openolt/tree/master/logConf>`__
+README.
+
+Log Collection from VOLTHA Ecosystem and Whitebox OLT Device
+------------------------------------------------------------
+
+Below diagram depicts the log collection from voltha components and
+whitebox OLT device through EFK.The fluentd pod running kind-voltha
+setup collects logs from all the voltha components and push to
+elasticsearch pod.The td-agent(fluentd variant) service running on
+whitebox OLT device capture the logs from openolt agent process, device
+mgmt daemon process and system logs and transmits the logs to the
+elasticsearch pod running in voltha cluster over tcp protocol.
+
+.. figure:: ../_static/centralize-logging.png
+   :width: 6.50000in
+   :height: 2.50000in
+
+Secure EFK setup and transport of Logs from OLT device
+------------------------------------------------------
+
+The Operator can enhance the setup by making configuration changes with
+the requirement.
+
+The Authentication, Authorization, and Security features for EFK can be
+enabled via X-Pack plugin and Role Based Access Control (RBAC) in
+Elasticsearch.The transmission of logs from the Whitebox OLT device can
+be secured by enabling tls/ssl encryption with EFK setup and
+td-agent.Refer following link for Security features.
+`*https://www.elastic.co/guide/en/elasticsearch/reference/current/elasticsearch-security.html* <https://www.elastic.co/guide/en/elasticsearch/reference/current/elasticsearch-security.html>`__
+
+To enable TLS/SSL encryption for elasticsearch pod refer the following
+link
+
+`*https://github.com/elastic/helm-charts/tree/master/elasticsearch/examples/security* <https://github.com/elastic/helm-charts/tree/master/elasticsearch/examples/security>`__
+
+To enable TLS/SSL encryption for kibana pod refer the following link
+
+`*https://github.com/elastic/helm-charts/tree/master/kibana/examples/security* <https://github.com/elastic/helm-charts/tree/master/kibana/examples/security>`__
+
+To enable TLS/SSL encryption for fluentd pod and td-agent service refer
+following link
+
+`*https://github.com/kiwigrid/helm-charts/tree/master/charts/fluentd-elasticsearch* <https://github.com/kiwigrid/helm-charts/tree/master/charts/fluentd-elasticsearch>`__
+
+Note: create certs directory in /etc/td-agent on the OLT device and copy
+the elastic-ca.pem certificate.
+
+Archive of Logs
+---------------
+
+There are various mechanisms available with EFK to save data.For example
+operators can use **reporting feature** to generate reports of saved
+search as CSV documents, that can be transferred to a support
+organization via email.You can save searches with time-boxed or with
+filtering the required fields then generate the report.To use reporting
+features refer the following link
+`*https://www.elastic.co/guide/en/kibana/current/reporting-getting-started.html* <https://www.elastic.co/guide/en/kibana/current/reporting-getting-started.html>`__
+
+Note: By default a 10mb of CSV file can be generated.To generate > 10mb
+of file enable x-pack plugin and rbac.To generate larger files need to
+have a bigger cluster configuration for the elasticsearch pod.The java
+heap space,cpu and memory need to be increased with the CSV file size.