diff --git a/index.rst b/index.rst
index 9656fd0..eba22b8 100644
--- a/index.rst
+++ b/index.rst
@@ -59,6 +59,7 @@
    Deploy VOLTHA <voltha-helm-charts/README.md>
    overview/workflows.rst
    overview/operate.rst
+   overview/lab_setup.rst
    overview/troubleshooting.rst
 
 .. toctree::
diff --git a/overview/lab_setup.rst b/overview/lab_setup.rst
index 8c11c70..3f2ea22 100644
--- a/overview/lab_setup.rst
+++ b/overview/lab_setup.rst
@@ -87,15 +87,32 @@
 
    # activate the interface
    ip link set eth1 up
-   # install the wpasupplicant tool
+   # install the required tools for testing
    apt update
-   apt install wpasupplicant
+   apt install -y wpasupplicant jq netsniff-ng build-essential tcpdump
 
 ..
 
-   NOTE: ``wpasupplicant`` is a Linux tool to perform 802.1X authentication.
-   `wpasupplicant documentation can be found here
-   <https://help.ubuntu.com/community/WifiDocs/WPAHowTo>`_.
+In the lxc container you also need to install iperf3. Iperf3 needs to be installed from source to have some
+options used in VOLTHA tests.
+
+.. code:: bash
+
+    git clone https://github.com/esnet/iperf.git -b 3.9
+    cd iperf
+    ./configure && make && sudo make install
+    ldconfig
+
+..
+
+   NOTE:
+
+   - ``wpasupplicant`` is a Linux tool to perform 802.1X authentication. `wpasupplicant documentation can be found here <https://help.ubuntu.com/community/WifiDocs/WPAHowTo>`_.
+   - ``jq`` is a linux tool to perform json parsing. `More information on jq <https://stedolan.github.io/jq/>`_
+   - ``netsniff-ng`` installs maushezan, a linux tool to perform traffic generations. `More informations on mz <https://man7.org/linux/man-pages/man8/mausezahn.8.html>`_
+   - ``iperf3`` is a linux tool to perform speed tests. `More information on iperf3 <https://iperf.fr/>`_
+
+
 
 Create a configuration file for ``wpasupplicant`` in
 ``/etc/wpa_supplicant/wpa_supplicant.conf`` with the content:
@@ -199,6 +216,73 @@
      option domain-name-servers 8.8.8.8;
    }
 
+Other BNG required tools
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Some tools are required to perform data plane tests present in voltha-system-tests.
+The following commands install them:
+
+.. code:: bash
+
+    sudo apt update
+    sudo apt-get install -y jq netsniff-ng build-essential tcpdump
+
+..
+
+In the BNG you also need to install ``iperf3``. ``Iperf3`` needs to be installed from source to have some
+options used in the tests.
+
+.. code:: bash
+
+    #remove existing installation if any
+    sudo service iperf3 stop
+    sudo apt-get remove --purge iperf3
+    #Clone and install from source
+    git clone https://github.com/esnet/iperf.git -b 3.9
+    cd iperf
+    ./configure && make && sudo make install
+    sudo ldconfig
+
+..
+
+After installing ``iperf3`` on the BNG node it needs to be configured.
+Create the ``iperf3.service`` file:
+
+.. code:: bash
+
+    sudo vi /etc/systemd/system/iperf3.service
+
+..
+
+Include this content in the newly created file:
+
+.. code:: text
+
+    [Unit]
+    Description=iperf3
+    [Service]
+    ExecStart=/usr/local/bin/iperf3 --server
+    [Install]
+    WantedBy=multi-user.target
+
+..
+
+Start the ``iperf3`` service
+
+.. code:: bash
+
+    sudo service iperf3 start
+
+..
+
+Finally, check the ``iperf3`` service
+
+.. code:: bash
+
+    sudo service iperf3 status
+
+..
+
 Configuration for in-band OLT control
 -------------------------------------
 
diff --git a/release_notes/voltha_2.7.rst b/release_notes/voltha_2.7.rst
index 3df4159..6d338a7 100644
--- a/release_notes/voltha_2.7.rst
+++ b/release_notes/voltha_2.7.rst
@@ -164,7 +164,7 @@
 - `ofagent-go <https://gerrit.opencord.org/gitweb?p=ofagent-go.git;a=tree;h=refs/heads/voltha-2.7>`_ - ``1.5.2``  with chart ``2.8.3``
 - `voltctl <https://gerrit.opencord.org/gitweb?p=voltctl.git;a=tree>`_ - ``1.4.4``
 - `voltha-openolt-adapter <https://gerrit.opencord.org/gitweb?p=voltha-openolt-adapter.git;a=tree;h=refs/heads/voltha-2.7>`_ - ``3.1.8`` with chart ``2.8.8``
-- `voltha-openonu-adapter-go <https://gerrit.opencord.org/gitweb?p=voltha-openonu-adapter-go.git;a=tree;h=refs/heads/voltha-2.7>`_ - ``1.2.11`` with chart ``2.7.16``
+- `voltha-openonu-adapter-go <https://gerrit.opencord.org/gitweb?p=voltha-openonu-adapter-go.git;a=tree;h=refs/heads/voltha-2.7>`_ - ``1.2.14`` with chart ``2.7.17``
 - `voltha-onos <https://gerrit.opencord.org/gitweb?p=voltha-onos.git;a=tree;h=refs/heads/voltha-2.7>`_ -  ``4.3.1`` with chart ``0.1.13``
 - `openolt agent <https://gerrit.opencord.org/gitweb?p=openolt.git;a=tree;h=refs/heads/voltha-2.7>`_ - ``3.3.3``
 - `voltha-protos <https://github.com/opencord/voltha-protos/releases/tag/v4.0.5>`_ - ``4.0.16``
@@ -176,7 +176,7 @@
 ++++++++++++++++++++
 This section refers to the macro charts to deploy the required infrastructure and a (or many) VOLTHA stacks:
 - Voltha-infra: ``0.1.13``
-- Voltha-stack: ``0.1.18``
+- Voltha-stack: ``0.1.19``
 
 
 **Available from EdgeCore site**
diff --git a/requirements.txt b/requirements.txt
index 3a3044c..2053e92 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -2,6 +2,7 @@
 actdiag~=2.0.0
 blockdiag~=1.5.4
 doc8~=0.8.0
+docutils==0.16
 nwdiag~=2.0.0
 recommonmark~=0.6.0
 seqdiag~=2.0.0