# -*- coding: utf-8 -*-
# -----------------------------------------------------------------------
# Copyright 2019-2024 Open Networking Foundation Contributors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http:#www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -----------------------------------------------------------------------
# SPDX-FileCopyrightText: 2019-2024 Open Networking Foundation Contributors
# SPDX-License-Identifier: Apache-2.0
# -----------------------------------------------------------------------
# Intent:
# -----------------------------------------------------------------------

# Configuration file for the Sphinx documentation builder.
#
# This file does only contain a selection of the most common options. For a
# full list see the documentation:
# http://www.sphinx-doc.org/en/master/config

# -- Path setup --------------------------------------------------------------

# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.

##-------------------##
##---]  IMPORTS  [---##
##-------------------##
import os
import sys
from pathlib import Path

# --------------------------------------------------------------
# Large exclusion list(s) extracted from conf.py => .sphinx/*.py
if True:  # Set searchpath early
    abs_path = Path(".").resolve().as_posix()
    sys.path.insert(0, abs_path)

# -- Options for linkcheck ----------------------------------------------
from sphinx_conf.exclude_patterns import exclude_patterns
from sphinx_conf.linkcheck_ignore import linkcheck_ignore

# -----------------------------------------------------------------------
# -----------------------------------------------------------------------
def get_version():
    with open("VERSION") as f:
        return f.read().strip()


# -- Project information -----------------------------------------------------

project = "VOLTHA Docs"
copyright = (
    "Copyright 2019-2024 Open Networking Foundation Contributors"
)
author = "VOLTHA Contributors"

# The short X.Y version
version = get_version()
# The full version, including alpha/beta/rc tags
release = version

# -- General configuration ---------------------------------------------------

# If your documentation needs a minimal Sphinx version, state it here.
#
# needs_sphinx = '1.0'

# make all warnings errors
warning_is_error = True

# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = [
    "recommonmark",
    "sphinx.ext.coverage",
    "sphinx.ext.extlinks",
    "sphinx.ext.graphviz",
    "sphinx.ext.ifconfig",
    #    'sphinx.ext.intersphinx',    # :doc:`my document <../my_doc{.rst}>`
    "sphinx.ext.mathjax",
    "sphinx.ext.todo",
    "sphinxcontrib.spelling",
    "sphinx_multiversion",
    "sphinx.ext.intersphinx",
    "sphinxcontrib.openapi",
]

# API documentation
# https://github.com/rtfd/sphinx-autoapi
# https://sphinx-autoapi.readthedocs.io
#   autoapi_type = 'go'
#   autoapi_dirs = [
#       'voltha-go/cli/util',
#       'voltha-go/rw_core/config',
#       'voltha-go/rw_core/core',
#       'voltha-go/rw_core/graph',
#       'voltha-go/rw_core/utils',
#   ]

# Text files with lists of words that shouldn't fail the spellchecker:
spelling_word_list_filename = [
    "dict.txt",
]

# sphinx-multiversion prep, run in each versioned source directory
prep_commands = [
    "ln -sf _root_/repos _target_/repos",
    "make prep",
]

# don't include tags
# smv_tag_whitelist = None
# smv_tag_whitelist = disabled^ # Was = None
smv_tag_whitelist = "disabled_a^"  # Was = None

# inlcude only the branches matching master and voltha-*
smv_branch_whitelist = r"^(master|voltha-.*)$"

# include all remote branches
smv_remote_whitelist = r"^.*$"

# Add any paths that contain templates here, relative to this directory.
templates_path = ["_templates"]

# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
#
# source_suffix = ['.rst', '.md']
source_suffix = [".rst", ".md"]

# The master toctree document.
master_doc = "index"

# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None

# The name of the Pygments (syntax highlighting) style to use.
pygments_style = None

# -- Options for HTML output -------------------------------------------------

# The theme to use for HTML and HTML Help pages.  See the documentation for
# a list of builtin themes.
#
html_theme = "sphinx_rtd_theme"

html_logo = "_static/voltha.svg"

html_favicon = "_static/voltha-favicon-128.png"

# Theme options are theme-specific and customize the look and feel of a theme
# further.  For a list of options available for each theme, see the
# documentation.
#
html_theme_options = {"logo_only": True}

# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ["_static"]

# Custom sidebar templates, must be a dictionary that maps document names
# to template names.
#
# The default sidebars (for documents that don't match any pattern) are
# defined by theme itself.  Builtin themes are using these templates by
# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
# 'searchbox.html']``.
#
# html_sidebars = {}


# -- Options for HTMLHelp output ---------------------------------------------

# Output file base name for HTML help builder.
htmlhelp_basename = "VOLTHADocs"


# -- Options for LaTeX output ------------------------------------------------

latex_elements = {
    # The paper size ('letterpaper' or 'a4paper').
    #
    # 'papersize': 'letterpaper',
    # The font size ('10pt', '11pt' or '12pt').
    #
    # 'pointsize': '10pt',
    # Additional stuff for the LaTeX preamble.
    #
    # 'preamble': '',
    # Latex figure (float) alignment
    #
    # 'figure_align': 'htbp',
}

# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
#  author, documentclass [howto, manual, or own class]).
latex_documents = [
    (master_doc, "VOLTHADocs.tex", "VOLTHA Docs", "VOLTHA Team", "manual"),
]


# -- Options for manual page output ------------------------------------------

# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [(master_doc, "VOLTHA Docs", "VOLTHA Docs", [author], 1)]


# -- Options for Texinfo output ----------------------------------------------

# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
#  dir menu entry, description, category)
texinfo_documents = [
    (
        master_doc,
        "VOLTHA Docs",
        "VOLTHA Docs",
        author,
        "VOLTHADocs",
        "One line description of project.",
        "Miscellaneous",
    ),
]


# -- Options for Epub output -------------------------------------------------

# Bibliographic Dublin Core info.
epub_title = project

# The unique identifier of the text. This can be a ISBN number
# or the project homepage.
#
# epub_identifier = ''

# A unique identification for the text.
#
# epub_uid = ''

# A list of files that should not be packed into the epub file.
epub_exclude_files = ["search.html"]


# -- Extension configuration -------------------------------------------------

# blockdiag/etc. config

rackdiag_antialias = True
rackdiag_html_image_format = "SVG"
rackdiag_fontpath = [
    "_static/fonts/Inconsolata-Regular.ttf",
    "_static/fonts/Inconsolata-Bold.ttf",
]

nwdiag_antialias = True
nwdiag_html_image_format = "SVG"
nwdiag_fontpath = [
    "_static/fonts/Inconsolata-Regular.ttf",
    "_static/fonts/Inconsolata-Bold.ttf",
]

# -- Options for extlinks extension ------------------------------------------
# ..seealso: https://www.sphinx-doc.org/en/master/usage/extensions/todo.html
#        'vhc' : 'https://gerrit.opencord.org/plugins/gitiles/voltha-helm-charts',

extlinks = {
    "vol-jira": ("https://jira.opencord.org/projects/VOL/issues/%s", "jira::%s"),
    "jira-browse": ("https://jira.opencord.org/browse/%s", "jira::%s"),
    # macros for gerrit or github URL construction
    "repo": ("https://github.com/opencord/%s", "repo::%s"),
    "vol-ger": ("https://gerrit.opencord.org/plugins/gitiles/%s", "gerrit::%s"),
    "vol-git": ("https://github.com/opencord/%s", "git::%s"),
    # https://mvnrepository
    "mvn-cord": ("http://mvnrepository.com/artifact/org.opencord/%s", "mvn::%s"),
}

# -- Options for inlining a constant value -----------------------------------
# NOTE: rst_prolog will affect every file in the repository.
# Use per-file substitution to limit scope:
#   https://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html
# rst_prolog = """
# .. |voltha-latest| replace:: voltha-2.11
# """

# -- Options for todo extension ----------------------------------------------
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = True

# -- Configure recommonmark to use AutoStructify -----------------------------
# Docs: https://recommonmark.readthedocs.io/en/latest/auto_structify.html

import recommonmark
from recommonmark.transform import AutoStructify

github_doc_root = "https://github.com/opencord/voltha-docs"


def setup(app):

    app.add_css_file("css/rtd_theme_mods.css")

    app.add_config_value(
        "recommonmark_config",
        {
            "url_resolver": lambda url: github_doc_root + url,
            "auto_toc_tree_section": "Contents",
        },
        True,
    )

    app.add_transform(AutoStructify)