[VOL-1349] EPON OLT adapter (package B)
Change-Id: I634ef62c53813dcf4456f54948f13e06358e263c
diff --git a/vendor/github.com/uber/jaeger-client-go/reporter.go b/vendor/github.com/uber/jaeger-client-go/reporter.go
new file mode 100644
index 0000000..a71a92c
--- /dev/null
+++ b/vendor/github.com/uber/jaeger-client-go/reporter.go
@@ -0,0 +1,322 @@
+// Copyright (c) 2017 Uber Technologies, Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package jaeger
+
+import (
+ "fmt"
+ "sync"
+ "sync/atomic"
+ "time"
+
+ "github.com/opentracing/opentracing-go"
+
+ "github.com/uber/jaeger-client-go/internal/reporterstats"
+ "github.com/uber/jaeger-client-go/log"
+)
+
+// Reporter is called by the tracer when a span is completed to report the span to the tracing collector.
+type Reporter interface {
+ // Report submits a new span to collectors, possibly asynchronously and/or with buffering.
+ // If the reporter is processing Span asynchronously then it needs to Retain() the span,
+ // and then Release() it when no longer needed, to avoid span data corruption.
+ Report(span *Span)
+
+ // Close does a clean shutdown of the reporter, flushing any traces that may be buffered in memory.
+ Close()
+}
+
+// ------------------------------
+
+type nullReporter struct{}
+
+// NewNullReporter creates a no-op reporter that ignores all reported spans.
+func NewNullReporter() Reporter {
+ return &nullReporter{}
+}
+
+// Report implements Report() method of Reporter by doing nothing.
+func (r *nullReporter) Report(span *Span) {
+ // no-op
+}
+
+// Close implements Close() method of Reporter by doing nothing.
+func (r *nullReporter) Close() {
+ // no-op
+}
+
+// ------------------------------
+
+type loggingReporter struct {
+ logger Logger
+}
+
+// NewLoggingReporter creates a reporter that logs all reported spans to provided logger.
+func NewLoggingReporter(logger Logger) Reporter {
+ return &loggingReporter{logger}
+}
+
+// Report implements Report() method of Reporter by logging the span to the logger.
+func (r *loggingReporter) Report(span *Span) {
+ r.logger.Infof("Reporting span %+v", span)
+}
+
+// Close implements Close() method of Reporter by doing nothing.
+func (r *loggingReporter) Close() {
+ // no-op
+}
+
+// ------------------------------
+
+// InMemoryReporter is used for testing, and simply collects spans in memory.
+type InMemoryReporter struct {
+ spans []opentracing.Span
+ lock sync.Mutex
+}
+
+// NewInMemoryReporter creates a reporter that stores spans in memory.
+// NOTE: the Tracer should be created with options.PoolSpans = false.
+func NewInMemoryReporter() *InMemoryReporter {
+ return &InMemoryReporter{
+ spans: make([]opentracing.Span, 0, 10),
+ }
+}
+
+// Report implements Report() method of Reporter by storing the span in the buffer.
+func (r *InMemoryReporter) Report(span *Span) {
+ r.lock.Lock()
+ // Need to retain the span otherwise it will be released
+ r.spans = append(r.spans, span.Retain())
+ r.lock.Unlock()
+}
+
+// Close implements Close() method of Reporter
+func (r *InMemoryReporter) Close() {
+ r.Reset()
+}
+
+// SpansSubmitted returns the number of spans accumulated in the buffer.
+func (r *InMemoryReporter) SpansSubmitted() int {
+ r.lock.Lock()
+ defer r.lock.Unlock()
+ return len(r.spans)
+}
+
+// GetSpans returns accumulated spans as a copy of the buffer.
+func (r *InMemoryReporter) GetSpans() []opentracing.Span {
+ r.lock.Lock()
+ defer r.lock.Unlock()
+ copied := make([]opentracing.Span, len(r.spans))
+ copy(copied, r.spans)
+ return copied
+}
+
+// Reset clears all accumulated spans.
+func (r *InMemoryReporter) Reset() {
+ r.lock.Lock()
+ defer r.lock.Unlock()
+
+ // Before reset the collection need to release Span memory
+ for _, span := range r.spans {
+ span.(*Span).Release()
+ }
+ r.spans = r.spans[:0]
+}
+
+// ------------------------------
+
+type compositeReporter struct {
+ reporters []Reporter
+}
+
+// NewCompositeReporter creates a reporter that ignores all reported spans.
+func NewCompositeReporter(reporters ...Reporter) Reporter {
+ return &compositeReporter{reporters: reporters}
+}
+
+// Report implements Report() method of Reporter by delegating to each underlying reporter.
+func (r *compositeReporter) Report(span *Span) {
+ for _, reporter := range r.reporters {
+ reporter.Report(span)
+ }
+}
+
+// Close implements Close() method of Reporter by closing each underlying reporter.
+func (r *compositeReporter) Close() {
+ for _, reporter := range r.reporters {
+ reporter.Close()
+ }
+}
+
+// ------------- REMOTE REPORTER -----------------
+
+type reporterQueueItemType int
+
+const (
+ defaultQueueSize = 100
+ defaultBufferFlushInterval = 1 * time.Second
+
+ reporterQueueItemSpan reporterQueueItemType = iota
+ reporterQueueItemClose
+)
+
+type reporterQueueItem struct {
+ itemType reporterQueueItemType
+ span *Span
+ close *sync.WaitGroup
+}
+
+// reporterStats implements reporterstats.ReporterStats.
+type reporterStats struct {
+ droppedCount int64 // provided to Transports to report data loss to the backend
+}
+
+// SpansDroppedFromQueue implements reporterstats.ReporterStats.
+func (r *reporterStats) SpansDroppedFromQueue() int64 {
+ return atomic.LoadInt64(&r.droppedCount)
+}
+
+func (r *reporterStats) incDroppedCount() {
+ atomic.AddInt64(&r.droppedCount, 1)
+}
+
+type remoteReporter struct {
+ // These fields must be first in the struct because `sync/atomic` expects 64-bit alignment.
+ // Cf. https://github.com/uber/jaeger-client-go/issues/155, https://goo.gl/zW7dgq
+ queueLength int64 // used to update metrics.Gauge
+ closed int64 // 0 - not closed, 1 - closed
+
+ reporterOptions
+
+ sender Transport
+ queue chan reporterQueueItem
+ reporterStats *reporterStats
+}
+
+// NewRemoteReporter creates a new reporter that sends spans out of process by means of Sender.
+// Calls to Report(Span) return immediately (side effect: if internal buffer is full the span is dropped).
+// Periodically the transport buffer is flushed even if it hasn't reached max packet size.
+// Calls to Close() block until all spans reported prior to the call to Close are flushed.
+func NewRemoteReporter(sender Transport, opts ...ReporterOption) Reporter {
+ options := reporterOptions{}
+ for _, option := range opts {
+ option(&options)
+ }
+ if options.bufferFlushInterval <= 0 {
+ options.bufferFlushInterval = defaultBufferFlushInterval
+ }
+ if options.logger == nil {
+ options.logger = log.NullLogger
+ }
+ if options.metrics == nil {
+ options.metrics = NewNullMetrics()
+ }
+ if options.queueSize <= 0 {
+ options.queueSize = defaultQueueSize
+ }
+ reporter := &remoteReporter{
+ reporterOptions: options,
+ sender: sender,
+ queue: make(chan reporterQueueItem, options.queueSize),
+ reporterStats: new(reporterStats),
+ }
+ if receiver, ok := sender.(reporterstats.Receiver); ok {
+ receiver.SetReporterStats(reporter.reporterStats)
+ }
+ go reporter.processQueue()
+ return reporter
+}
+
+// Report implements Report() method of Reporter.
+// It passes the span to a background go-routine for submission to Jaeger backend.
+// If the internal queue is full, the span is dropped and metrics.ReporterDropped counter is incremented.
+// If Report() is called after the reporter has been Close()-ed, the additional spans will not be
+// sent to the backend, but the metrics.ReporterDropped counter may not reflect them correctly,
+// because some of them may still be successfully added to the queue.
+func (r *remoteReporter) Report(span *Span) {
+ select {
+ // Need to retain the span otherwise it will be released
+ case r.queue <- reporterQueueItem{itemType: reporterQueueItemSpan, span: span.Retain()}:
+ atomic.AddInt64(&r.queueLength, 1)
+ default:
+ r.metrics.ReporterDropped.Inc(1)
+ r.reporterStats.incDroppedCount()
+ }
+}
+
+// Close implements Close() method of Reporter by waiting for the queue to be drained.
+func (r *remoteReporter) Close() {
+ r.logger.Debugf("closing reporter")
+ if swapped := atomic.CompareAndSwapInt64(&r.closed, 0, 1); !swapped {
+ r.logger.Error("Repeated attempt to close the reporter is ignored")
+ return
+ }
+ r.sendCloseEvent()
+ _ = r.sender.Close()
+}
+
+func (r *remoteReporter) sendCloseEvent() {
+ wg := &sync.WaitGroup{}
+ wg.Add(1)
+ item := reporterQueueItem{itemType: reporterQueueItemClose, close: wg}
+
+ r.queue <- item // if the queue is full we will block until there is space
+ atomic.AddInt64(&r.queueLength, 1)
+ wg.Wait()
+}
+
+// processQueue reads spans from the queue, converts them to Thrift, and stores them in an internal buffer.
+// When the buffer length reaches batchSize, it is flushed by submitting the accumulated spans to Jaeger.
+// Buffer also gets flushed automatically every batchFlushInterval seconds, just in case the tracer stopped
+// reporting new spans.
+func (r *remoteReporter) processQueue() {
+ // flush causes the Sender to flush its accumulated spans and clear the buffer
+ flush := func() {
+ if flushed, err := r.sender.Flush(); err != nil {
+ r.metrics.ReporterFailure.Inc(int64(flushed))
+ r.logger.Error(fmt.Sprintf("failed to flush Jaeger spans to server: %s", err.Error()))
+ } else if flushed > 0 {
+ r.metrics.ReporterSuccess.Inc(int64(flushed))
+ }
+ }
+
+ timer := time.NewTicker(r.bufferFlushInterval)
+ for {
+ select {
+ case <-timer.C:
+ flush()
+ case item := <-r.queue:
+ atomic.AddInt64(&r.queueLength, -1)
+ switch item.itemType {
+ case reporterQueueItemSpan:
+ span := item.span
+ if flushed, err := r.sender.Append(span); err != nil {
+ r.metrics.ReporterFailure.Inc(int64(flushed))
+ r.logger.Error(fmt.Sprintf("error reporting Jaeger span %q: %s", span.OperationName(), err.Error()))
+ } else if flushed > 0 {
+ r.metrics.ReporterSuccess.Inc(int64(flushed))
+ // to reduce the number of gauge stats, we only emit queue length on flush
+ r.metrics.ReporterQueueLength.Update(atomic.LoadInt64(&r.queueLength))
+ r.logger.Debugf("flushed %d spans", flushed)
+ }
+ span.Release()
+ case reporterQueueItemClose:
+ timer.Stop()
+ flush()
+ item.close.Done()
+ return
+ }
+ }
+ }
+}