[VOL-1349] EPON ONU adapter (package B)
Change-Id: I609ba349c429bc7e87c74b66bb1121841f9caef6
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointcesuni.go b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointcesuni.go
new file mode 100644
index 0000000..68f4887
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointcesuni.go
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointCesUniClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point CES UNI
+const PhysicalPathTerminationPointCesUniClassID ClassID = ClassID(12)
+
+var physicalpathterminationpointcesuniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointCesUni (class ID #12)
+// This ME represents the point at a CES UNI in the ONU where the physical path terminates and
+// physical level functions are performed.
+//
+// The ONU automatically creates an instance of this ME per port:
+//
+// o when the ONU has CES ports built into its factory configuration;
+//
+// o when a cardholder is provisioned to expect a circuit pack of a CES type;
+//
+// o when a cardholder provisioned for plug-and-play is equipped with a circuit pack of a CES type.
+// Note that the installation of a plug-and-play card may indicate the presence of CES ports via
+// equipment ID as well as its type and indeed may cause the ONU to instantiate a port-mapping
+// package that specifies CES ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect a CES circuit pack, nor is it equipped with a CES circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with each real or pre-provisioned CES port. It can be
+// linked from a GEM IW TP, a pseudowire TP or a logical N * 64 kbit/s CTP.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte
+// number indicates the physical position of the UNI. The first byte is the slot ID (defined in
+// clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+// Expected Type
+// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+// Sensed Type
+// Sensed type: If the value of expected type is not 0, then the value of sensed type equals the
+// value of expected type. If expected type-= 0, then the value of sensed type is one of the
+// compatible values from Table-9.1.5-1. Upon ME instantiation, the ONU sets this attribute to 0 or
+// to the value that reflects the physically present equipment. (R) (mandatory if the ONU supports
+// circuit packs with configurable interface types, e.g., C1.5/2/6.3) (1-byte)
+//
+// Ces Loopback Configuration
+// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+// Administrative State
+// Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+// ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Framing
+// Upon ME instantiation, the ONU sets this attribute to a value that reflects the vendor's
+// default. (R,-W) (optional) (1-byte)
+//
+// Encoding
+// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory for DS1 and DS3
+// interfaces) (1-byte)
+//
+// Line Length
+// Line length: This attribute specifies the length of the twisted pair cable from a DS1 physical
+// UNI to the DSX-1 cross-connect point or the length of coaxial cable from a DS3 physical UNI to
+// the DSX-3 cross-connect point. Valid values are given in Table 9.8.1-1. Upon ME instantiation
+// for a DS1 interface, the ONU assigns the value 0 for non-power feed type DS1 and the value 6 for
+// power feed type DS1. Upon ME instantiation for a DS3 interface, the ONU sets this attribute to
+// 0x0F. (R,-W) (optional) (1-byte)
+//
+// Ds1 Mode
+// In the event of conflicting values between this attribute and the (also optional) line length
+// attribute, the line length attribute is taken to be valid. This permits the separation of line
+// build-out (LBO) and power settings from smart jack and FDL behaviour. Upon ME instantiation, the
+// ONU sets this attribute to 0. (R,-W) (optional) (1-byte)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Line Type
+// (R,-W) (mandatory for DS3, E3 and multi-configuration interfaces, not applicable to other
+// interfaces) (1-byte)
+//
+type PhysicalPathTerminationPointCesUni struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointcesuniBME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointCesUni",
+ ClassID: 12,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfff0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("ExpectedType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("SensedType", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, false, false, 2),
+ 3: ByteField("CesLoopbackConfiguration", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, false, false, 3),
+ 4: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), true, true, false, 5),
+ 6: ByteField("Framing", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
+ 7: ByteField("Encoding", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+ 8: ByteField("LineLength", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+ 9: ByteField("Ds1Mode", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+ 10: ByteField("Arc", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), true, true, false, 10),
+ 11: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+ 12: ByteField("LineType", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewPhysicalPathTerminationPointCesUni (class ID 12) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointCesUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*physicalpathterminationpointcesuniBME, params...)
+}