[VOL-1349] EPON ONU adapter (package B)
Change-Id: I609ba349c429bc7e87c74b66bb1121841f9caef6
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/redownstreamamplifier.go b/vendor/github.com/opencord/omci-lib-go/generated/redownstreamamplifier.go
new file mode 100644
index 0000000..59d758b
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/redownstreamamplifier.go
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// ReDownstreamAmplifierClassID is the 16-bit ID for the OMCI
+// Managed entity RE downstream amplifier
+const ReDownstreamAmplifierClassID ClassID = ClassID(316)
+
+var redownstreamamplifierBME *ManagedEntityDefinition
+
+// ReDownstreamAmplifier (class ID #316)
+// This ME organizes data associated with each OA for downstream data supported by the RE. The
+// management ONU automatically creates one instance of this ME for each downstream OA as follows.
+//
+// o When the RE has mid-span PON RE downstream OA ports built into its factory configuration.
+//
+// o When a cardholder is provisioned to expect a circuit pack of the mid-span PON RE downstream OA
+// type.
+//
+// o When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the midspan
+// PON RE downstream OA type. Note that the installation of a plug-and-play card may indicate the
+// presence of a mid-span PON RE downstream OA via equipment ID as well as its type attribute, and
+// indeed may cause the management ONU to instantiate a port-mapping package to specify the ports
+// precisely.
+//
+// The management ONU automatically deletes instances of this ME when a cardholder is neither
+// provisioned to expect a mid-span PON RE downstream OA circuit pack, nor is it equipped with a
+// mid-span PON RE downstream OA circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with a downstream OA and with an instance of a circuit
+// pack. If the RE includes OEO regeneration in either direction, the RE downstream amplifier is
+// also associated with an RE ANI-G. Refer to clause-9.14.1 for further discussion.
+//
+// Attributes
+// Managed Entity Id
+// NOTE 1 - This ME ID may be identical to that of an RE ANI-G if it shares the same physical slot-
+// port.
+//
+// Administrative State
+// NOTE 2- When an RE supports multiple PONs, or protected access to a single PON, its primary
+// ANI-G cannot be completely shut down, due to a loss of the management communications capability.
+// Complete blocking of service and removal of power may nevertheless be appropriate for secondary
+// RE ANI-Gs. Administrative lock suppresses alarms and notifications for both primary and
+// secondary RE ANI-Gs. Administrative lock suppresses alarms and notifications for an RE
+// downstream amplifier, be it either primary or secondary.
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Operational Mode
+// (R,W) (mandatory) (1-byte)
+//
+// Input Optical Signal Level
+// Input optical signal level: This attribute reports the current measurement of the input optical
+// signal power of the downstream OA. Its value is a 2s-complement integer referred to 1-mW (i.e.,
+// dBm), with 0.002-dB granularity. (R) (optional) (2-bytes)
+//
+// Lower Input Optical Threshold
+// Lower input optical threshold: This attribute specifies the optical level the RE uses to declare
+// the low received optical power alarm. Valid values are -127-dBm (coded as 254) to 0-dBm (coded
+// as 0) in 0.5-dB increments. The default value 0xFF selects the RE's internal policy. (R,-W)
+// (optional) (1-byte)
+//
+// Upper Input Optical Threshold
+// Upper input optical threshold: This attribute specifies the optical level the RE uses to declare
+// the high received optical power alarm. Valid values are -127-dBm (coded as 254) to 0-dBm (coded
+// as 0) in 0.5-dB increments. The default value 0xFF selects the RE's internal policy. (R,-W)
+// (optional) (1-byte)
+//
+// Output Optical Signal Level
+// Output optical signal level: This attribute reports the current measurement of the mean optical
+// launch power of the downstream OA. Its value is a 2s-complement integer referred to 1-mW (i.e.,
+// dBm), with 0.002-dB granularity. (R) (optional) (2-bytes)
+//
+// Lower Output Optical Threshold
+// Lower output optical threshold: This attribute specifies the minimum mean optical launch power
+// that the RE uses to declare the low transmit optical power alarm. Its value is a 2s complement
+// integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value 0x7F selects
+// the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+// Upper Output Optical Threshold
+// Upper output optical threshold: This attribute specifies the maximum mean optical launch power
+// that the RE uses to declare the high transmit optical power alarm. Its value is a 2s complement
+// integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value 0x7F selects
+// the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+// R'S' Splitter Coupling Ratio
+// R'S' splitter coupling ratio: This attribute reports the coupling ratio of the splitter at the
+// R'/S' interface that connects the embedded management ONU and the amplifiers to the OTL. Valid
+// values are 99:1 (coded as 99-decimal) to 1:99 (coded as 1 decimal), where the first value is the
+// value encoded and is the percentage of the optical signal connected to the amplifier. The
+// default value 0xFF indicates that there is no splitter connected to this upstream/downstream
+// amplifier pair. (R) (optional) (1-byte)
+//
+type ReDownstreamAmplifier struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ redownstreamamplifierBME = &ManagedEntityDefinition{
+ Name: "ReDownstreamAmplifier",
+ ClassID: 316,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ Test,
+ ),
+ AllowedAttributeMask: 0xfff0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
+ 3: ByteField("Arc", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
+ 4: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+ 5: ByteField("OperationalMode", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+ 6: Uint16Field("InputOpticalSignalLevel", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, true, false, 6),
+ 7: ByteField("LowerInputOpticalThreshold", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
+ 8: ByteField("UpperInputOpticalThreshold", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+ 9: Uint16Field("OutputOpticalSignalLevel", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9),
+ 10: ByteField("LowerOutputOpticalThreshold", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+ 11: ByteField("UpperOutputOpticalThreshold", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+ 12: ByteField("R'S'SplitterCouplingRatio", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewReDownstreamAmplifier (class ID 316) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewReDownstreamAmplifier(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*redownstreamamplifierBME, params...)
+}