diff --git a/vendor/github.com/opencord/omci-lib-go/generated/xdslchannelconfigurationprofile.go b/vendor/github.com/opencord/omci-lib-go/generated/xdslchannelconfigurationprofile.go
new file mode 100644
index 0000000..e5ae2a4
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/xdslchannelconfigurationprofile.go
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslChannelConfigurationProfileClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL channel configuration profile
+const XdslChannelConfigurationProfileClassID ClassID = ClassID(107)
+
+var xdslchannelconfigurationprofileBME *ManagedEntityDefinition
+
+// XdslChannelConfigurationProfile (class ID #107)
+//	This ME contains the channel configuration profile for an xDSL UNI. An instance of this ME is
+//	created and deleted by the OLT.
+//
+//	NOTE - If [ITUT G.997.1] compatibility is required, bit rates should only be set to integer
+//	multiples of 1000-bits/s. The ONU may reject attempts to set other values for bit rate
+//	attributes.
+//
+//	Relationships
+//		An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part
+//		1.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. The value 0 is
+//			reserved. (R, setbycreate) (mandatory) (2-bytes)
+//
+//		Minimum Data Rate
+//			Minimum data rate: This parameter specifies the minimum desired net data rate for the bearer
+//			channel. It is coded in bits per second. (R,-W, setbycreate) (mandatory) (4-bytes)
+//
+//		Maximum Data Rate
+//			Maximum data rate: This parameter specifies the maximum desired net data rate for the bearer
+//			channel. It is coded in bits per second. (R,-W, setbycreate) (mandatory) (4-bytes)
+//
+//		Rate Adaptation Ratio
+//			Rate adaptation ratio: This attribute specifies the weight that should be taken into account
+//			when performing rate adaptation in the direction of the bearer channel. The attribute is defined
+//			as a percentage. The value 20, for example, means that 20% of the available data rate (in excess
+//			of the minimum data rate summed over all bearer channels) is assigned to this bearer channel and
+//			80% to the other bearer channels. The OLT must ensure that the sum of rate adaptation ratios
+//			over all bearers in one direction is 100%. (R,-W, setbycreate) (optional) (1-byte)
+//
+//		Maximum Interleaving Delay
+//			The delay is coded in milliseconds, varying from 2 to 63, with special meaning assigned to
+//			values 0, 1 and 255. The value 0 indicates that no delay bound is imposed. The value 1 indicates
+//			the fast latency path is to be used in the ITUT G.992.1 operating mode and S and D are to be
+//			selected such that S- 1 and D-= 1 in ITU-T G.992.2, ITUT G.992.3, ITUT G.992.4, ITUT G.992.5 and
+//			ITUT G.993.2 operating modes. The value 255 indicates a delay bound of 1-ms in ITUT-G.993.2
+//			operation. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+//		Data Rate Threshold Upshift
+//			Data rate threshold upshift: This attribute is a threshold on the cumulative data rate upshift
+//			achieved over one or more bearer channel data rate adaptations. An upshift rate change (DRT up)
+//			notification is issued by the PPTP xDSL UNI part 1 when the actual data rate exceeds the data
+//			rate at the last entry into showtime by more than the threshold. The data rate threshold is
+//			coded in bits per second. (R,-W, setbycreate) (mandatory for xDSL standards that use this
+//			attribute) (4-bytes)
+//
+//		Data Rate Threshold Downshift
+//			Data rate threshold downshift: This attribute is a threshold on the cumulative data rate
+//			downshift achieved over one or more bearer channel data rate adaptations. A downshift rate
+//			change (DRT down) notification is issued by the PPTP xDSL UNI part 1 when the actual data rate
+//			is below the data rate at the last entry into showtime by more than the threshold. The data rate
+//			threshold is coded in bits per second. (R,-W, setbycreate) (mandatory for xDSL standards that
+//			use this attribute) (4-bytes)
+//
+//		Minimum Reserved Data Rate
+//			Minimum reserved data rate: This attribute specifies the desired minimum reserved net data rate
+//			for the bearer channel. The rate is coded in bits per second. This attribute is needed only if
+//			the rate adaptation mode is set to dynamic in the xDSL line configuration profile part 1. (R,-W,
+//			setbycreate) (optional) (4-bytes)
+//
+//		Minimum Data Rate In Low _ Power State
+//			Minimum data rate in low-power state: This parameter specifies the minimum desired net data rate
+//			for the bearer channel during the low-power state (L1/L2). The power management low-power states
+//			L1 and L2 are defined in [ITUT-G.992.2] and [ITUT G.992.3], respectively. The data rate is coded
+//			in bits per second. (R,-W, setbycreate) (mandatory) (4-byte)
+//
+//		Minimum Impulse Noise Protection
+//			(R,-W, setbycreate) (optional for [ITU-T G.992.1], mandatory for other xDSL standards that use
+//			this attribute) (1-byte)
+//
+//		Maximum Bit Error Ratio
+//			(R,-W, setbycreate) (mandatory for standards that use this attribute) (1-byte)
+//
+//		Minimum Impulse Noise Protection 8_Khz
+//			Minimum impulse noise protection 8-kHz: The INPmin8 attribute specifies the minimum INP for the
+//			bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625-kHz. It
+//			is only valid for [ITUT-G.993.2]. INP is expressed in DMT symbols with a subcarrier spacing of
+//			8.625-kHz. It can take any integer value from 0 (default) to 16, inclusive. (R, W) (mandatory
+//			for [ITUT-G.993.2]) (1 byte)
+//
+//		Maximum Delay Variation
+//			Maximum delay variation: The DVMAX attribute specifies the maximum value for delay variation
+//			allowed in an OLR procedure. Its value ranges from 1 (0.1-ms) to 254 (25.4-ms). The special
+//			value 255 specifies that no delay variation bound is imposed. (R, W) (optional: used by
+//			[ITUT-G.993.2]) (1 byte)
+//
+//		Channel Initialization Policy Selection
+//			Channel initialization policy selection: The CIPOLICY attribute specifies the policy to
+//			determine transceiver configuration at initialization. Valid values are 0..1, as defined in the
+//			Recommendations that use this attribute. (R,-W) (optional) (1-byte)
+//
+//		Minimum Sos Bit Rate Downstream
+//			Minimum SOS bit rate downstream: The MIN-SOS-BR-ds attribute specifies the minimum net data rate
+//			required for a valid SOS request in the downstream direction. The value is coded as an unsigned
+//			integer representing the data rate as a multiple of 8-kbit/s. (R,-W) (optional) (4-bytes)
+//
+//		Minimum Sos Bit Rate Upstream
+//			Minimum SOS bit rate upstream: The MIN-SOS-BR-us attribute specifies the minimum net data rate
+//			required for a valid SOS request in the upstream direction. The value is coded as an unsigned
+//			integer representing the data rate as a multiple of 8-kbit/s. (R,-W) (optional) (4-bytes)
+//
+type XdslChannelConfigurationProfile struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	xdslchannelconfigurationprofileBME = &ManagedEntityDefinition{
+		Name:    "XdslChannelConfigurationProfile",
+		ClassID: 107,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xfffe,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1:  Uint32Field("MinimumDataRate", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+			2:  Uint32Field("MaximumDataRate", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+			3:  ByteField("RateAdaptationRatio", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+			4:  ByteField("MaximumInterleavingDelay", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+			5:  Uint32Field("DataRateThresholdUpshift", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+			6:  Uint32Field("DataRateThresholdDownshift", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+			7:  Uint32Field("MinimumReservedDataRate", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+			8:  Uint32Field("MinimumDataRateInLowPowerState", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+			9:  ByteField("MinimumImpulseNoiseProtection", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+			10: ByteField("MaximumBitErrorRatio", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+			11: ByteField("MinimumImpulseNoiseProtection8Khz", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
+			12: ByteField("MaximumDelayVariation", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
+			13: ByteField("ChannelInitializationPolicySelection", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+			14: Uint32Field("MinimumSosBitRateDownstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
+			15: Uint32Field("MinimumSosBitRateUpstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+	}
+}
+
+// NewXdslChannelConfigurationProfile (class ID 107) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslChannelConfigurationProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*xdslchannelconfigurationprofileBME, params...)
+}