[VOL-1349] EPON ONU adapter (package B)
Change-Id: I609ba349c429bc7e87c74b66bb1121841f9caef6
diff --git a/vendor/go.etcd.io/etcd/raft/rawnode.go b/vendor/go.etcd.io/etcd/raft/rawnode.go
new file mode 100644
index 0000000..90eb694
--- /dev/null
+++ b/vendor/go.etcd.io/etcd/raft/rawnode.go
@@ -0,0 +1,239 @@
+// Copyright 2015 The etcd Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package raft
+
+import (
+ "errors"
+
+ pb "go.etcd.io/etcd/raft/raftpb"
+ "go.etcd.io/etcd/raft/tracker"
+)
+
+// ErrStepLocalMsg is returned when try to step a local raft message
+var ErrStepLocalMsg = errors.New("raft: cannot step raft local message")
+
+// ErrStepPeerNotFound is returned when try to step a response message
+// but there is no peer found in raft.prs for that node.
+var ErrStepPeerNotFound = errors.New("raft: cannot step as peer not found")
+
+// RawNode is a thread-unsafe Node.
+// The methods of this struct correspond to the methods of Node and are described
+// more fully there.
+type RawNode struct {
+ raft *raft
+ prevSoftSt *SoftState
+ prevHardSt pb.HardState
+}
+
+// NewRawNode instantiates a RawNode from the given configuration.
+//
+// See Bootstrap() for bootstrapping an initial state; this replaces the former
+// 'peers' argument to this method (with identical behavior). However, It is
+// recommended that instead of calling Bootstrap, applications bootstrap their
+// state manually by setting up a Storage that has a first index > 1 and which
+// stores the desired ConfState as its InitialState.
+func NewRawNode(config *Config) (*RawNode, error) {
+ r := newRaft(config)
+ rn := &RawNode{
+ raft: r,
+ }
+ rn.prevSoftSt = r.softState()
+ rn.prevHardSt = r.hardState()
+ return rn, nil
+}
+
+// Tick advances the internal logical clock by a single tick.
+func (rn *RawNode) Tick() {
+ rn.raft.tick()
+}
+
+// TickQuiesced advances the internal logical clock by a single tick without
+// performing any other state machine processing. It allows the caller to avoid
+// periodic heartbeats and elections when all of the peers in a Raft group are
+// known to be at the same state. Expected usage is to periodically invoke Tick
+// or TickQuiesced depending on whether the group is "active" or "quiesced".
+//
+// WARNING: Be very careful about using this method as it subverts the Raft
+// state machine. You should probably be using Tick instead.
+func (rn *RawNode) TickQuiesced() {
+ rn.raft.electionElapsed++
+}
+
+// Campaign causes this RawNode to transition to candidate state.
+func (rn *RawNode) Campaign() error {
+ return rn.raft.Step(pb.Message{
+ Type: pb.MsgHup,
+ })
+}
+
+// Propose proposes data be appended to the raft log.
+func (rn *RawNode) Propose(data []byte) error {
+ return rn.raft.Step(pb.Message{
+ Type: pb.MsgProp,
+ From: rn.raft.id,
+ Entries: []pb.Entry{
+ {Data: data},
+ }})
+}
+
+// ProposeConfChange proposes a config change. See (Node).ProposeConfChange for
+// details.
+func (rn *RawNode) ProposeConfChange(cc pb.ConfChangeI) error {
+ m, err := confChangeToMsg(cc)
+ if err != nil {
+ return err
+ }
+ return rn.raft.Step(m)
+}
+
+// ApplyConfChange applies a config change to the local node.
+func (rn *RawNode) ApplyConfChange(cc pb.ConfChangeI) *pb.ConfState {
+ cs := rn.raft.applyConfChange(cc.AsV2())
+ return &cs
+}
+
+// Step advances the state machine using the given message.
+func (rn *RawNode) Step(m pb.Message) error {
+ // ignore unexpected local messages receiving over network
+ if IsLocalMsg(m.Type) {
+ return ErrStepLocalMsg
+ }
+ if pr := rn.raft.prs.Progress[m.From]; pr != nil || !IsResponseMsg(m.Type) {
+ return rn.raft.Step(m)
+ }
+ return ErrStepPeerNotFound
+}
+
+// Ready returns the outstanding work that the application needs to handle. This
+// includes appending and applying entries or a snapshot, updating the HardState,
+// and sending messages. The returned Ready() *must* be handled and subsequently
+// passed back via Advance().
+func (rn *RawNode) Ready() Ready {
+ rd := rn.readyWithoutAccept()
+ rn.acceptReady(rd)
+ return rd
+}
+
+// readyWithoutAccept returns a Ready. This is a read-only operation, i.e. there
+// is no obligation that the Ready must be handled.
+func (rn *RawNode) readyWithoutAccept() Ready {
+ return newReady(rn.raft, rn.prevSoftSt, rn.prevHardSt)
+}
+
+// acceptReady is called when the consumer of the RawNode has decided to go
+// ahead and handle a Ready. Nothing must alter the state of the RawNode between
+// this call and the prior call to Ready().
+func (rn *RawNode) acceptReady(rd Ready) {
+ if rd.SoftState != nil {
+ rn.prevSoftSt = rd.SoftState
+ }
+ if len(rd.ReadStates) != 0 {
+ rn.raft.readStates = nil
+ }
+ rn.raft.msgs = nil
+}
+
+// HasReady called when RawNode user need to check if any Ready pending.
+// Checking logic in this method should be consistent with Ready.containsUpdates().
+func (rn *RawNode) HasReady() bool {
+ r := rn.raft
+ if !r.softState().equal(rn.prevSoftSt) {
+ return true
+ }
+ if hardSt := r.hardState(); !IsEmptyHardState(hardSt) && !isHardStateEqual(hardSt, rn.prevHardSt) {
+ return true
+ }
+ if r.raftLog.unstable.snapshot != nil && !IsEmptySnap(*r.raftLog.unstable.snapshot) {
+ return true
+ }
+ if len(r.msgs) > 0 || len(r.raftLog.unstableEntries()) > 0 || r.raftLog.hasNextEnts() {
+ return true
+ }
+ if len(r.readStates) != 0 {
+ return true
+ }
+ return false
+}
+
+// Advance notifies the RawNode that the application has applied and saved progress in the
+// last Ready results.
+func (rn *RawNode) Advance(rd Ready) {
+ if !IsEmptyHardState(rd.HardState) {
+ rn.prevHardSt = rd.HardState
+ }
+ rn.raft.advance(rd)
+}
+
+// Status returns the current status of the given group. This allocates, see
+// BasicStatus and WithProgress for allocation-friendlier choices.
+func (rn *RawNode) Status() Status {
+ status := getStatus(rn.raft)
+ return status
+}
+
+// BasicStatus returns a BasicStatus. Notably this does not contain the
+// Progress map; see WithProgress for an allocation-free way to inspect it.
+func (rn *RawNode) BasicStatus() BasicStatus {
+ return getBasicStatus(rn.raft)
+}
+
+// ProgressType indicates the type of replica a Progress corresponds to.
+type ProgressType byte
+
+const (
+ // ProgressTypePeer accompanies a Progress for a regular peer replica.
+ ProgressTypePeer ProgressType = iota
+ // ProgressTypeLearner accompanies a Progress for a learner replica.
+ ProgressTypeLearner
+)
+
+// WithProgress is a helper to introspect the Progress for this node and its
+// peers.
+func (rn *RawNode) WithProgress(visitor func(id uint64, typ ProgressType, pr tracker.Progress)) {
+ rn.raft.prs.Visit(func(id uint64, pr *tracker.Progress) {
+ typ := ProgressTypePeer
+ if pr.IsLearner {
+ typ = ProgressTypeLearner
+ }
+ p := *pr
+ p.Inflights = nil
+ visitor(id, typ, p)
+ })
+}
+
+// ReportUnreachable reports the given node is not reachable for the last send.
+func (rn *RawNode) ReportUnreachable(id uint64) {
+ _ = rn.raft.Step(pb.Message{Type: pb.MsgUnreachable, From: id})
+}
+
+// ReportSnapshot reports the status of the sent snapshot.
+func (rn *RawNode) ReportSnapshot(id uint64, status SnapshotStatus) {
+ rej := status == SnapshotFailure
+
+ _ = rn.raft.Step(pb.Message{Type: pb.MsgSnapStatus, From: id, Reject: rej})
+}
+
+// TransferLeader tries to transfer leadership to the given transferee.
+func (rn *RawNode) TransferLeader(transferee uint64) {
+ _ = rn.raft.Step(pb.Message{Type: pb.MsgTransferLeader, From: transferee})
+}
+
+// ReadIndex requests a read state. The read state will be set in ready.
+// Read State has a read index. Once the application advances further than the read
+// index, any linearizable read requests issued before the read request can be
+// processed safely. The read state will have the same rctx attached.
+func (rn *RawNode) ReadIndex(rctx []byte) {
+ _ = rn.raft.Step(pb.Message{Type: pb.MsgReadIndex, Entries: []pb.Entry{{Data: rctx}}})
+}