diff --git a/vendor/golang.org/x/net/http2/.gitignore b/vendor/golang.org/x/net/http2/.gitignore
new file mode 100644
index 0000000..190f122
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/.gitignore
@@ -0,0 +1,2 @@
+*~
+h2i/h2i
diff --git a/vendor/golang.org/x/net/http2/Dockerfile b/vendor/golang.org/x/net/http2/Dockerfile
new file mode 100644
index 0000000..53fc525
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/Dockerfile
@@ -0,0 +1,51 @@
+#
+# This Dockerfile builds a recent curl with HTTP/2 client support, using
+# a recent nghttp2 build.
+#
+# See the Makefile for how to tag it. If Docker and that image is found, the
+# Go tests use this curl binary for integration tests.
+#
+
+FROM ubuntu:trusty
+
+RUN apt-get update && \
+    apt-get upgrade -y && \
+    apt-get install -y git-core build-essential wget
+
+RUN apt-get install -y --no-install-recommends \
+       autotools-dev libtool pkg-config zlib1g-dev \
+       libcunit1-dev libssl-dev libxml2-dev libevent-dev \
+       automake autoconf
+
+# The list of packages nghttp2 recommends for h2load:
+RUN apt-get install -y --no-install-recommends make binutils \
+        autoconf automake autotools-dev \
+        libtool pkg-config zlib1g-dev libcunit1-dev libssl-dev libxml2-dev \
+        libev-dev libevent-dev libjansson-dev libjemalloc-dev \
+        cython python3.4-dev python-setuptools
+
+# Note: setting NGHTTP2_VER before the git clone, so an old git clone isn't cached:
+ENV NGHTTP2_VER 895da9a
+RUN cd /root && git clone https://github.com/tatsuhiro-t/nghttp2.git
+
+WORKDIR /root/nghttp2
+RUN git reset --hard $NGHTTP2_VER
+RUN autoreconf -i
+RUN automake
+RUN autoconf
+RUN ./configure
+RUN make
+RUN make install
+
+WORKDIR /root
+RUN wget http://curl.haxx.se/download/curl-7.45.0.tar.gz
+RUN tar -zxvf curl-7.45.0.tar.gz
+WORKDIR /root/curl-7.45.0
+RUN ./configure --with-ssl --with-nghttp2=/usr/local
+RUN make
+RUN make install
+RUN ldconfig
+
+CMD ["-h"]
+ENTRYPOINT ["/usr/local/bin/curl"]
+
diff --git a/vendor/golang.org/x/net/http2/Makefile b/vendor/golang.org/x/net/http2/Makefile
new file mode 100644
index 0000000..55fd826
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/Makefile
@@ -0,0 +1,3 @@
+curlimage:
+	docker build -t gohttp2/curl .
+
diff --git a/vendor/golang.org/x/net/http2/README b/vendor/golang.org/x/net/http2/README
new file mode 100644
index 0000000..360d5aa
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/README
@@ -0,0 +1,20 @@
+This is a work-in-progress HTTP/2 implementation for Go.
+
+It will eventually live in the Go standard library and won't require
+any changes to your code to use.  It will just be automatic.
+
+Status:
+
+* The server support is pretty good. A few things are missing
+  but are being worked on.
+* The client work has just started but shares a lot of code
+  is coming along much quicker.
+
+Docs are at https://godoc.org/golang.org/x/net/http2
+
+Demo test server at https://http2.golang.org/
+
+Help & bug reports welcome!
+
+Contributing: https://golang.org/doc/contribute.html
+Bugs:         https://golang.org/issue/new?title=x/net/http2:+
diff --git a/vendor/golang.org/x/net/http2/ciphers.go b/vendor/golang.org/x/net/http2/ciphers.go
new file mode 100644
index 0000000..c9a0cf3
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/ciphers.go
@@ -0,0 +1,641 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+// A list of the possible cipher suite ids. Taken from
+// https://www.iana.org/assignments/tls-parameters/tls-parameters.txt
+
+const (
+	cipher_TLS_NULL_WITH_NULL_NULL               uint16 = 0x0000
+	cipher_TLS_RSA_WITH_NULL_MD5                 uint16 = 0x0001
+	cipher_TLS_RSA_WITH_NULL_SHA                 uint16 = 0x0002
+	cipher_TLS_RSA_EXPORT_WITH_RC4_40_MD5        uint16 = 0x0003
+	cipher_TLS_RSA_WITH_RC4_128_MD5              uint16 = 0x0004
+	cipher_TLS_RSA_WITH_RC4_128_SHA              uint16 = 0x0005
+	cipher_TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5    uint16 = 0x0006
+	cipher_TLS_RSA_WITH_IDEA_CBC_SHA             uint16 = 0x0007
+	cipher_TLS_RSA_EXPORT_WITH_DES40_CBC_SHA     uint16 = 0x0008
+	cipher_TLS_RSA_WITH_DES_CBC_SHA              uint16 = 0x0009
+	cipher_TLS_RSA_WITH_3DES_EDE_CBC_SHA         uint16 = 0x000A
+	cipher_TLS_DH_DSS_EXPORT_WITH_DES40_CBC_SHA  uint16 = 0x000B
+	cipher_TLS_DH_DSS_WITH_DES_CBC_SHA           uint16 = 0x000C
+	cipher_TLS_DH_DSS_WITH_3DES_EDE_CBC_SHA      uint16 = 0x000D
+	cipher_TLS_DH_RSA_EXPORT_WITH_DES40_CBC_SHA  uint16 = 0x000E
+	cipher_TLS_DH_RSA_WITH_DES_CBC_SHA           uint16 = 0x000F
+	cipher_TLS_DH_RSA_WITH_3DES_EDE_CBC_SHA      uint16 = 0x0010
+	cipher_TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0011
+	cipher_TLS_DHE_DSS_WITH_DES_CBC_SHA          uint16 = 0x0012
+	cipher_TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA     uint16 = 0x0013
+	cipher_TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0014
+	cipher_TLS_DHE_RSA_WITH_DES_CBC_SHA          uint16 = 0x0015
+	cipher_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA     uint16 = 0x0016
+	cipher_TLS_DH_anon_EXPORT_WITH_RC4_40_MD5    uint16 = 0x0017
+	cipher_TLS_DH_anon_WITH_RC4_128_MD5          uint16 = 0x0018
+	cipher_TLS_DH_anon_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0019
+	cipher_TLS_DH_anon_WITH_DES_CBC_SHA          uint16 = 0x001A
+	cipher_TLS_DH_anon_WITH_3DES_EDE_CBC_SHA     uint16 = 0x001B
+	// Reserved uint16 =  0x001C-1D
+	cipher_TLS_KRB5_WITH_DES_CBC_SHA             uint16 = 0x001E
+	cipher_TLS_KRB5_WITH_3DES_EDE_CBC_SHA        uint16 = 0x001F
+	cipher_TLS_KRB5_WITH_RC4_128_SHA             uint16 = 0x0020
+	cipher_TLS_KRB5_WITH_IDEA_CBC_SHA            uint16 = 0x0021
+	cipher_TLS_KRB5_WITH_DES_CBC_MD5             uint16 = 0x0022
+	cipher_TLS_KRB5_WITH_3DES_EDE_CBC_MD5        uint16 = 0x0023
+	cipher_TLS_KRB5_WITH_RC4_128_MD5             uint16 = 0x0024
+	cipher_TLS_KRB5_WITH_IDEA_CBC_MD5            uint16 = 0x0025
+	cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA   uint16 = 0x0026
+	cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_SHA   uint16 = 0x0027
+	cipher_TLS_KRB5_EXPORT_WITH_RC4_40_SHA       uint16 = 0x0028
+	cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5   uint16 = 0x0029
+	cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_MD5   uint16 = 0x002A
+	cipher_TLS_KRB5_EXPORT_WITH_RC4_40_MD5       uint16 = 0x002B
+	cipher_TLS_PSK_WITH_NULL_SHA                 uint16 = 0x002C
+	cipher_TLS_DHE_PSK_WITH_NULL_SHA             uint16 = 0x002D
+	cipher_TLS_RSA_PSK_WITH_NULL_SHA             uint16 = 0x002E
+	cipher_TLS_RSA_WITH_AES_128_CBC_SHA          uint16 = 0x002F
+	cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA       uint16 = 0x0030
+	cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA       uint16 = 0x0031
+	cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA      uint16 = 0x0032
+	cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA      uint16 = 0x0033
+	cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA      uint16 = 0x0034
+	cipher_TLS_RSA_WITH_AES_256_CBC_SHA          uint16 = 0x0035
+	cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA       uint16 = 0x0036
+	cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA       uint16 = 0x0037
+	cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA      uint16 = 0x0038
+	cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA      uint16 = 0x0039
+	cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA      uint16 = 0x003A
+	cipher_TLS_RSA_WITH_NULL_SHA256              uint16 = 0x003B
+	cipher_TLS_RSA_WITH_AES_128_CBC_SHA256       uint16 = 0x003C
+	cipher_TLS_RSA_WITH_AES_256_CBC_SHA256       uint16 = 0x003D
+	cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA256    uint16 = 0x003E
+	cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA256    uint16 = 0x003F
+	cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA256   uint16 = 0x0040
+	cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA     uint16 = 0x0041
+	cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA  uint16 = 0x0042
+	cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA  uint16 = 0x0043
+	cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0044
+	cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0045
+	cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0046
+	// Reserved uint16 =  0x0047-4F
+	// Reserved uint16 =  0x0050-58
+	// Reserved uint16 =  0x0059-5C
+	// Unassigned uint16 =  0x005D-5F
+	// Reserved uint16 =  0x0060-66
+	cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0x0067
+	cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA256  uint16 = 0x0068
+	cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA256  uint16 = 0x0069
+	cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA256 uint16 = 0x006A
+	cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 uint16 = 0x006B
+	cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA256 uint16 = 0x006C
+	cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA256 uint16 = 0x006D
+	// Unassigned uint16 =  0x006E-83
+	cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA        uint16 = 0x0084
+	cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA     uint16 = 0x0085
+	cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA     uint16 = 0x0086
+	cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA    uint16 = 0x0087
+	cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA    uint16 = 0x0088
+	cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA    uint16 = 0x0089
+	cipher_TLS_PSK_WITH_RC4_128_SHA                 uint16 = 0x008A
+	cipher_TLS_PSK_WITH_3DES_EDE_CBC_SHA            uint16 = 0x008B
+	cipher_TLS_PSK_WITH_AES_128_CBC_SHA             uint16 = 0x008C
+	cipher_TLS_PSK_WITH_AES_256_CBC_SHA             uint16 = 0x008D
+	cipher_TLS_DHE_PSK_WITH_RC4_128_SHA             uint16 = 0x008E
+	cipher_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA        uint16 = 0x008F
+	cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA         uint16 = 0x0090
+	cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA         uint16 = 0x0091
+	cipher_TLS_RSA_PSK_WITH_RC4_128_SHA             uint16 = 0x0092
+	cipher_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA        uint16 = 0x0093
+	cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA         uint16 = 0x0094
+	cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA         uint16 = 0x0095
+	cipher_TLS_RSA_WITH_SEED_CBC_SHA                uint16 = 0x0096
+	cipher_TLS_DH_DSS_WITH_SEED_CBC_SHA             uint16 = 0x0097
+	cipher_TLS_DH_RSA_WITH_SEED_CBC_SHA             uint16 = 0x0098
+	cipher_TLS_DHE_DSS_WITH_SEED_CBC_SHA            uint16 = 0x0099
+	cipher_TLS_DHE_RSA_WITH_SEED_CBC_SHA            uint16 = 0x009A
+	cipher_TLS_DH_anon_WITH_SEED_CBC_SHA            uint16 = 0x009B
+	cipher_TLS_RSA_WITH_AES_128_GCM_SHA256          uint16 = 0x009C
+	cipher_TLS_RSA_WITH_AES_256_GCM_SHA384          uint16 = 0x009D
+	cipher_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256      uint16 = 0x009E
+	cipher_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384      uint16 = 0x009F
+	cipher_TLS_DH_RSA_WITH_AES_128_GCM_SHA256       uint16 = 0x00A0
+	cipher_TLS_DH_RSA_WITH_AES_256_GCM_SHA384       uint16 = 0x00A1
+	cipher_TLS_DHE_DSS_WITH_AES_128_GCM_SHA256      uint16 = 0x00A2
+	cipher_TLS_DHE_DSS_WITH_AES_256_GCM_SHA384      uint16 = 0x00A3
+	cipher_TLS_DH_DSS_WITH_AES_128_GCM_SHA256       uint16 = 0x00A4
+	cipher_TLS_DH_DSS_WITH_AES_256_GCM_SHA384       uint16 = 0x00A5
+	cipher_TLS_DH_anon_WITH_AES_128_GCM_SHA256      uint16 = 0x00A6
+	cipher_TLS_DH_anon_WITH_AES_256_GCM_SHA384      uint16 = 0x00A7
+	cipher_TLS_PSK_WITH_AES_128_GCM_SHA256          uint16 = 0x00A8
+	cipher_TLS_PSK_WITH_AES_256_GCM_SHA384          uint16 = 0x00A9
+	cipher_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256      uint16 = 0x00AA
+	cipher_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384      uint16 = 0x00AB
+	cipher_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256      uint16 = 0x00AC
+	cipher_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384      uint16 = 0x00AD
+	cipher_TLS_PSK_WITH_AES_128_CBC_SHA256          uint16 = 0x00AE
+	cipher_TLS_PSK_WITH_AES_256_CBC_SHA384          uint16 = 0x00AF
+	cipher_TLS_PSK_WITH_NULL_SHA256                 uint16 = 0x00B0
+	cipher_TLS_PSK_WITH_NULL_SHA384                 uint16 = 0x00B1
+	cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256      uint16 = 0x00B2
+	cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384      uint16 = 0x00B3
+	cipher_TLS_DHE_PSK_WITH_NULL_SHA256             uint16 = 0x00B4
+	cipher_TLS_DHE_PSK_WITH_NULL_SHA384             uint16 = 0x00B5
+	cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256      uint16 = 0x00B6
+	cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384      uint16 = 0x00B7
+	cipher_TLS_RSA_PSK_WITH_NULL_SHA256             uint16 = 0x00B8
+	cipher_TLS_RSA_PSK_WITH_NULL_SHA384             uint16 = 0x00B9
+	cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256     uint16 = 0x00BA
+	cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA256  uint16 = 0x00BB
+	cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA256  uint16 = 0x00BC
+	cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BD
+	cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BE
+	cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BF
+	cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256     uint16 = 0x00C0
+	cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA256  uint16 = 0x00C1
+	cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA256  uint16 = 0x00C2
+	cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C3
+	cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C4
+	cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C5
+	// Unassigned uint16 =  0x00C6-FE
+	cipher_TLS_EMPTY_RENEGOTIATION_INFO_SCSV uint16 = 0x00FF
+	// Unassigned uint16 =  0x01-55,*
+	cipher_TLS_FALLBACK_SCSV uint16 = 0x5600
+	// Unassigned                                   uint16 = 0x5601 - 0xC000
+	cipher_TLS_ECDH_ECDSA_WITH_NULL_SHA                 uint16 = 0xC001
+	cipher_TLS_ECDH_ECDSA_WITH_RC4_128_SHA              uint16 = 0xC002
+	cipher_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA         uint16 = 0xC003
+	cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA          uint16 = 0xC004
+	cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA          uint16 = 0xC005
+	cipher_TLS_ECDHE_ECDSA_WITH_NULL_SHA                uint16 = 0xC006
+	cipher_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA             uint16 = 0xC007
+	cipher_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA        uint16 = 0xC008
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA         uint16 = 0xC009
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA         uint16 = 0xC00A
+	cipher_TLS_ECDH_RSA_WITH_NULL_SHA                   uint16 = 0xC00B
+	cipher_TLS_ECDH_RSA_WITH_RC4_128_SHA                uint16 = 0xC00C
+	cipher_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA           uint16 = 0xC00D
+	cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA            uint16 = 0xC00E
+	cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA            uint16 = 0xC00F
+	cipher_TLS_ECDHE_RSA_WITH_NULL_SHA                  uint16 = 0xC010
+	cipher_TLS_ECDHE_RSA_WITH_RC4_128_SHA               uint16 = 0xC011
+	cipher_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA          uint16 = 0xC012
+	cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA           uint16 = 0xC013
+	cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA           uint16 = 0xC014
+	cipher_TLS_ECDH_anon_WITH_NULL_SHA                  uint16 = 0xC015
+	cipher_TLS_ECDH_anon_WITH_RC4_128_SHA               uint16 = 0xC016
+	cipher_TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA          uint16 = 0xC017
+	cipher_TLS_ECDH_anon_WITH_AES_128_CBC_SHA           uint16 = 0xC018
+	cipher_TLS_ECDH_anon_WITH_AES_256_CBC_SHA           uint16 = 0xC019
+	cipher_TLS_SRP_SHA_WITH_3DES_EDE_CBC_SHA            uint16 = 0xC01A
+	cipher_TLS_SRP_SHA_RSA_WITH_3DES_EDE_CBC_SHA        uint16 = 0xC01B
+	cipher_TLS_SRP_SHA_DSS_WITH_3DES_EDE_CBC_SHA        uint16 = 0xC01C
+	cipher_TLS_SRP_SHA_WITH_AES_128_CBC_SHA             uint16 = 0xC01D
+	cipher_TLS_SRP_SHA_RSA_WITH_AES_128_CBC_SHA         uint16 = 0xC01E
+	cipher_TLS_SRP_SHA_DSS_WITH_AES_128_CBC_SHA         uint16 = 0xC01F
+	cipher_TLS_SRP_SHA_WITH_AES_256_CBC_SHA             uint16 = 0xC020
+	cipher_TLS_SRP_SHA_RSA_WITH_AES_256_CBC_SHA         uint16 = 0xC021
+	cipher_TLS_SRP_SHA_DSS_WITH_AES_256_CBC_SHA         uint16 = 0xC022
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256      uint16 = 0xC023
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384      uint16 = 0xC024
+	cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256       uint16 = 0xC025
+	cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384       uint16 = 0xC026
+	cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256        uint16 = 0xC027
+	cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384        uint16 = 0xC028
+	cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256         uint16 = 0xC029
+	cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384         uint16 = 0xC02A
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256      uint16 = 0xC02B
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384      uint16 = 0xC02C
+	cipher_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256       uint16 = 0xC02D
+	cipher_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384       uint16 = 0xC02E
+	cipher_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256        uint16 = 0xC02F
+	cipher_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384        uint16 = 0xC030
+	cipher_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256         uint16 = 0xC031
+	cipher_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384         uint16 = 0xC032
+	cipher_TLS_ECDHE_PSK_WITH_RC4_128_SHA               uint16 = 0xC033
+	cipher_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA          uint16 = 0xC034
+	cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA           uint16 = 0xC035
+	cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA           uint16 = 0xC036
+	cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256        uint16 = 0xC037
+	cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384        uint16 = 0xC038
+	cipher_TLS_ECDHE_PSK_WITH_NULL_SHA                  uint16 = 0xC039
+	cipher_TLS_ECDHE_PSK_WITH_NULL_SHA256               uint16 = 0xC03A
+	cipher_TLS_ECDHE_PSK_WITH_NULL_SHA384               uint16 = 0xC03B
+	cipher_TLS_RSA_WITH_ARIA_128_CBC_SHA256             uint16 = 0xC03C
+	cipher_TLS_RSA_WITH_ARIA_256_CBC_SHA384             uint16 = 0xC03D
+	cipher_TLS_DH_DSS_WITH_ARIA_128_CBC_SHA256          uint16 = 0xC03E
+	cipher_TLS_DH_DSS_WITH_ARIA_256_CBC_SHA384          uint16 = 0xC03F
+	cipher_TLS_DH_RSA_WITH_ARIA_128_CBC_SHA256          uint16 = 0xC040
+	cipher_TLS_DH_RSA_WITH_ARIA_256_CBC_SHA384          uint16 = 0xC041
+	cipher_TLS_DHE_DSS_WITH_ARIA_128_CBC_SHA256         uint16 = 0xC042
+	cipher_TLS_DHE_DSS_WITH_ARIA_256_CBC_SHA384         uint16 = 0xC043
+	cipher_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256         uint16 = 0xC044
+	cipher_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384         uint16 = 0xC045
+	cipher_TLS_DH_anon_WITH_ARIA_128_CBC_SHA256         uint16 = 0xC046
+	cipher_TLS_DH_anon_WITH_ARIA_256_CBC_SHA384         uint16 = 0xC047
+	cipher_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256     uint16 = 0xC048
+	cipher_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384     uint16 = 0xC049
+	cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256      uint16 = 0xC04A
+	cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384      uint16 = 0xC04B
+	cipher_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256       uint16 = 0xC04C
+	cipher_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384       uint16 = 0xC04D
+	cipher_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256        uint16 = 0xC04E
+	cipher_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384        uint16 = 0xC04F
+	cipher_TLS_RSA_WITH_ARIA_128_GCM_SHA256             uint16 = 0xC050
+	cipher_TLS_RSA_WITH_ARIA_256_GCM_SHA384             uint16 = 0xC051
+	cipher_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256         uint16 = 0xC052
+	cipher_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384         uint16 = 0xC053
+	cipher_TLS_DH_RSA_WITH_ARIA_128_GCM_SHA256          uint16 = 0xC054
+	cipher_TLS_DH_RSA_WITH_ARIA_256_GCM_SHA384          uint16 = 0xC055
+	cipher_TLS_DHE_DSS_WITH_ARIA_128_GCM_SHA256         uint16 = 0xC056
+	cipher_TLS_DHE_DSS_WITH_ARIA_256_GCM_SHA384         uint16 = 0xC057
+	cipher_TLS_DH_DSS_WITH_ARIA_128_GCM_SHA256          uint16 = 0xC058
+	cipher_TLS_DH_DSS_WITH_ARIA_256_GCM_SHA384          uint16 = 0xC059
+	cipher_TLS_DH_anon_WITH_ARIA_128_GCM_SHA256         uint16 = 0xC05A
+	cipher_TLS_DH_anon_WITH_ARIA_256_GCM_SHA384         uint16 = 0xC05B
+	cipher_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256     uint16 = 0xC05C
+	cipher_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384     uint16 = 0xC05D
+	cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256      uint16 = 0xC05E
+	cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384      uint16 = 0xC05F
+	cipher_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256       uint16 = 0xC060
+	cipher_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384       uint16 = 0xC061
+	cipher_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256        uint16 = 0xC062
+	cipher_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384        uint16 = 0xC063
+	cipher_TLS_PSK_WITH_ARIA_128_CBC_SHA256             uint16 = 0xC064
+	cipher_TLS_PSK_WITH_ARIA_256_CBC_SHA384             uint16 = 0xC065
+	cipher_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256         uint16 = 0xC066
+	cipher_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384         uint16 = 0xC067
+	cipher_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256         uint16 = 0xC068
+	cipher_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384         uint16 = 0xC069
+	cipher_TLS_PSK_WITH_ARIA_128_GCM_SHA256             uint16 = 0xC06A
+	cipher_TLS_PSK_WITH_ARIA_256_GCM_SHA384             uint16 = 0xC06B
+	cipher_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256         uint16 = 0xC06C
+	cipher_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384         uint16 = 0xC06D
+	cipher_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256         uint16 = 0xC06E
+	cipher_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384         uint16 = 0xC06F
+	cipher_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256       uint16 = 0xC070
+	cipher_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384       uint16 = 0xC071
+	cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC072
+	cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC073
+	cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256  uint16 = 0xC074
+	cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384  uint16 = 0xC075
+	cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256   uint16 = 0xC076
+	cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384   uint16 = 0xC077
+	cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256    uint16 = 0xC078
+	cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384    uint16 = 0xC079
+	cipher_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256         uint16 = 0xC07A
+	cipher_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384         uint16 = 0xC07B
+	cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256     uint16 = 0xC07C
+	cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384     uint16 = 0xC07D
+	cipher_TLS_DH_RSA_WITH_CAMELLIA_128_GCM_SHA256      uint16 = 0xC07E
+	cipher_TLS_DH_RSA_WITH_CAMELLIA_256_GCM_SHA384      uint16 = 0xC07F
+	cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_GCM_SHA256     uint16 = 0xC080
+	cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_GCM_SHA384     uint16 = 0xC081
+	cipher_TLS_DH_DSS_WITH_CAMELLIA_128_GCM_SHA256      uint16 = 0xC082
+	cipher_TLS_DH_DSS_WITH_CAMELLIA_256_GCM_SHA384      uint16 = 0xC083
+	cipher_TLS_DH_anon_WITH_CAMELLIA_128_GCM_SHA256     uint16 = 0xC084
+	cipher_TLS_DH_anon_WITH_CAMELLIA_256_GCM_SHA384     uint16 = 0xC085
+	cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC086
+	cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC087
+	cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256  uint16 = 0xC088
+	cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384  uint16 = 0xC089
+	cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256   uint16 = 0xC08A
+	cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384   uint16 = 0xC08B
+	cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256    uint16 = 0xC08C
+	cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384    uint16 = 0xC08D
+	cipher_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256         uint16 = 0xC08E
+	cipher_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384         uint16 = 0xC08F
+	cipher_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256     uint16 = 0xC090
+	cipher_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384     uint16 = 0xC091
+	cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256     uint16 = 0xC092
+	cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384     uint16 = 0xC093
+	cipher_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256         uint16 = 0xC094
+	cipher_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384         uint16 = 0xC095
+	cipher_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256     uint16 = 0xC096
+	cipher_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384     uint16 = 0xC097
+	cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256     uint16 = 0xC098
+	cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384     uint16 = 0xC099
+	cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256   uint16 = 0xC09A
+	cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384   uint16 = 0xC09B
+	cipher_TLS_RSA_WITH_AES_128_CCM                     uint16 = 0xC09C
+	cipher_TLS_RSA_WITH_AES_256_CCM                     uint16 = 0xC09D
+	cipher_TLS_DHE_RSA_WITH_AES_128_CCM                 uint16 = 0xC09E
+	cipher_TLS_DHE_RSA_WITH_AES_256_CCM                 uint16 = 0xC09F
+	cipher_TLS_RSA_WITH_AES_128_CCM_8                   uint16 = 0xC0A0
+	cipher_TLS_RSA_WITH_AES_256_CCM_8                   uint16 = 0xC0A1
+	cipher_TLS_DHE_RSA_WITH_AES_128_CCM_8               uint16 = 0xC0A2
+	cipher_TLS_DHE_RSA_WITH_AES_256_CCM_8               uint16 = 0xC0A3
+	cipher_TLS_PSK_WITH_AES_128_CCM                     uint16 = 0xC0A4
+	cipher_TLS_PSK_WITH_AES_256_CCM                     uint16 = 0xC0A5
+	cipher_TLS_DHE_PSK_WITH_AES_128_CCM                 uint16 = 0xC0A6
+	cipher_TLS_DHE_PSK_WITH_AES_256_CCM                 uint16 = 0xC0A7
+	cipher_TLS_PSK_WITH_AES_128_CCM_8                   uint16 = 0xC0A8
+	cipher_TLS_PSK_WITH_AES_256_CCM_8                   uint16 = 0xC0A9
+	cipher_TLS_PSK_DHE_WITH_AES_128_CCM_8               uint16 = 0xC0AA
+	cipher_TLS_PSK_DHE_WITH_AES_256_CCM_8               uint16 = 0xC0AB
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CCM             uint16 = 0xC0AC
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CCM             uint16 = 0xC0AD
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8           uint16 = 0xC0AE
+	cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8           uint16 = 0xC0AF
+	// Unassigned uint16 =  0xC0B0-FF
+	// Unassigned uint16 =  0xC1-CB,*
+	// Unassigned uint16 =  0xCC00-A7
+	cipher_TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256   uint16 = 0xCCA8
+	cipher_TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCA9
+	cipher_TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256     uint16 = 0xCCAA
+	cipher_TLS_PSK_WITH_CHACHA20_POLY1305_SHA256         uint16 = 0xCCAB
+	cipher_TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256   uint16 = 0xCCAC
+	cipher_TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256     uint16 = 0xCCAD
+	cipher_TLS_RSA_PSK_WITH_CHACHA20_POLY1305_SHA256     uint16 = 0xCCAE
+)
+
+// isBadCipher reports whether the cipher is blacklisted by the HTTP/2 spec.
+// References:
+// https://tools.ietf.org/html/rfc7540#appendix-A
+// Reject cipher suites from Appendix A.
+// "This list includes those cipher suites that do not
+// offer an ephemeral key exchange and those that are
+// based on the TLS null, stream or block cipher type"
+func isBadCipher(cipher uint16) bool {
+	switch cipher {
+	case cipher_TLS_NULL_WITH_NULL_NULL,
+		cipher_TLS_RSA_WITH_NULL_MD5,
+		cipher_TLS_RSA_WITH_NULL_SHA,
+		cipher_TLS_RSA_EXPORT_WITH_RC4_40_MD5,
+		cipher_TLS_RSA_WITH_RC4_128_MD5,
+		cipher_TLS_RSA_WITH_RC4_128_SHA,
+		cipher_TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5,
+		cipher_TLS_RSA_WITH_IDEA_CBC_SHA,
+		cipher_TLS_RSA_EXPORT_WITH_DES40_CBC_SHA,
+		cipher_TLS_RSA_WITH_DES_CBC_SHA,
+		cipher_TLS_RSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_DH_DSS_EXPORT_WITH_DES40_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_DES_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_DH_RSA_EXPORT_WITH_DES40_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_DES_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_DES_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_DES_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_DH_anon_EXPORT_WITH_RC4_40_MD5,
+		cipher_TLS_DH_anon_WITH_RC4_128_MD5,
+		cipher_TLS_DH_anon_EXPORT_WITH_DES40_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_DES_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_KRB5_WITH_DES_CBC_SHA,
+		cipher_TLS_KRB5_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_KRB5_WITH_RC4_128_SHA,
+		cipher_TLS_KRB5_WITH_IDEA_CBC_SHA,
+		cipher_TLS_KRB5_WITH_DES_CBC_MD5,
+		cipher_TLS_KRB5_WITH_3DES_EDE_CBC_MD5,
+		cipher_TLS_KRB5_WITH_RC4_128_MD5,
+		cipher_TLS_KRB5_WITH_IDEA_CBC_MD5,
+		cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA,
+		cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_SHA,
+		cipher_TLS_KRB5_EXPORT_WITH_RC4_40_SHA,
+		cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5,
+		cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_MD5,
+		cipher_TLS_KRB5_EXPORT_WITH_RC4_40_MD5,
+		cipher_TLS_PSK_WITH_NULL_SHA,
+		cipher_TLS_DHE_PSK_WITH_NULL_SHA,
+		cipher_TLS_RSA_PSK_WITH_NULL_SHA,
+		cipher_TLS_RSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA,
+		cipher_TLS_RSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA,
+		cipher_TLS_RSA_WITH_NULL_SHA256,
+		cipher_TLS_RSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_RSA_WITH_AES_256_CBC_SHA256,
+		cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA256,
+		cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA256,
+		cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA256,
+		cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256,
+		cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA256,
+		cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA,
+		cipher_TLS_PSK_WITH_RC4_128_SHA,
+		cipher_TLS_PSK_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_PSK_WITH_AES_128_CBC_SHA,
+		cipher_TLS_PSK_WITH_AES_256_CBC_SHA,
+		cipher_TLS_DHE_PSK_WITH_RC4_128_SHA,
+		cipher_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA,
+		cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA,
+		cipher_TLS_RSA_PSK_WITH_RC4_128_SHA,
+		cipher_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA,
+		cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA,
+		cipher_TLS_RSA_WITH_SEED_CBC_SHA,
+		cipher_TLS_DH_DSS_WITH_SEED_CBC_SHA,
+		cipher_TLS_DH_RSA_WITH_SEED_CBC_SHA,
+		cipher_TLS_DHE_DSS_WITH_SEED_CBC_SHA,
+		cipher_TLS_DHE_RSA_WITH_SEED_CBC_SHA,
+		cipher_TLS_DH_anon_WITH_SEED_CBC_SHA,
+		cipher_TLS_RSA_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_RSA_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_DH_RSA_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_DH_RSA_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_DH_DSS_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_DH_DSS_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_DH_anon_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_DH_anon_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_PSK_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_PSK_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_PSK_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_PSK_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_PSK_WITH_NULL_SHA256,
+		cipher_TLS_PSK_WITH_NULL_SHA384,
+		cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_DHE_PSK_WITH_NULL_SHA256,
+		cipher_TLS_DHE_PSK_WITH_NULL_SHA384,
+		cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_RSA_PSK_WITH_NULL_SHA256,
+		cipher_TLS_RSA_PSK_WITH_NULL_SHA384,
+		cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256,
+		cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA256,
+		cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA256,
+		cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA256,
+		cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256,
+		cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA256,
+		cipher_TLS_EMPTY_RENEGOTIATION_INFO_SCSV,
+		cipher_TLS_ECDH_ECDSA_WITH_NULL_SHA,
+		cipher_TLS_ECDH_ECDSA_WITH_RC4_128_SHA,
+		cipher_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_ECDHE_ECDSA_WITH_NULL_SHA,
+		cipher_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,
+		cipher_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_ECDH_RSA_WITH_NULL_SHA,
+		cipher_TLS_ECDH_RSA_WITH_RC4_128_SHA,
+		cipher_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_ECDHE_RSA_WITH_NULL_SHA,
+		cipher_TLS_ECDHE_RSA_WITH_RC4_128_SHA,
+		cipher_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_ECDH_anon_WITH_NULL_SHA,
+		cipher_TLS_ECDH_anon_WITH_RC4_128_SHA,
+		cipher_TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_ECDH_anon_WITH_AES_128_CBC_SHA,
+		cipher_TLS_ECDH_anon_WITH_AES_256_CBC_SHA,
+		cipher_TLS_SRP_SHA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_SRP_SHA_RSA_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_SRP_SHA_DSS_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_SRP_SHA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_SRP_SHA_RSA_WITH_AES_128_CBC_SHA,
+		cipher_TLS_SRP_SHA_DSS_WITH_AES_128_CBC_SHA,
+		cipher_TLS_SRP_SHA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_SRP_SHA_RSA_WITH_AES_256_CBC_SHA,
+		cipher_TLS_SRP_SHA_DSS_WITH_AES_256_CBC_SHA,
+		cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256,
+		cipher_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384,
+		cipher_TLS_ECDHE_PSK_WITH_RC4_128_SHA,
+		cipher_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA,
+		cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA,
+		cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA,
+		cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256,
+		cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384,
+		cipher_TLS_ECDHE_PSK_WITH_NULL_SHA,
+		cipher_TLS_ECDHE_PSK_WITH_NULL_SHA256,
+		cipher_TLS_ECDHE_PSK_WITH_NULL_SHA384,
+		cipher_TLS_RSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_RSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_DH_DSS_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_DH_DSS_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_DH_RSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_DH_RSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_DHE_DSS_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_DHE_DSS_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_DH_anon_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_DH_anon_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_RSA_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_RSA_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_DH_RSA_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_DH_RSA_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_DH_DSS_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_DH_DSS_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_DH_anon_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_DH_anon_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_PSK_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_PSK_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_PSK_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_PSK_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256,
+		cipher_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384,
+		cipher_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256,
+		cipher_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384,
+		cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_DH_RSA_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_DH_RSA_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_DH_DSS_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_DH_DSS_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_DH_anon_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_DH_anon_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256,
+		cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384,
+		cipher_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+		cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+		cipher_TLS_RSA_WITH_AES_128_CCM,
+		cipher_TLS_RSA_WITH_AES_256_CCM,
+		cipher_TLS_RSA_WITH_AES_128_CCM_8,
+		cipher_TLS_RSA_WITH_AES_256_CCM_8,
+		cipher_TLS_PSK_WITH_AES_128_CCM,
+		cipher_TLS_PSK_WITH_AES_256_CCM,
+		cipher_TLS_PSK_WITH_AES_128_CCM_8,
+		cipher_TLS_PSK_WITH_AES_256_CCM_8:
+		return true
+	default:
+		return false
+	}
+}
diff --git a/vendor/golang.org/x/net/http2/client_conn_pool.go b/vendor/golang.org/x/net/http2/client_conn_pool.go
new file mode 100644
index 0000000..f4d9b5e
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/client_conn_pool.go
@@ -0,0 +1,282 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Transport code's client connection pooling.
+
+package http2
+
+import (
+	"crypto/tls"
+	"net/http"
+	"sync"
+)
+
+// ClientConnPool manages a pool of HTTP/2 client connections.
+type ClientConnPool interface {
+	GetClientConn(req *http.Request, addr string) (*ClientConn, error)
+	MarkDead(*ClientConn)
+}
+
+// clientConnPoolIdleCloser is the interface implemented by ClientConnPool
+// implementations which can close their idle connections.
+type clientConnPoolIdleCloser interface {
+	ClientConnPool
+	closeIdleConnections()
+}
+
+var (
+	_ clientConnPoolIdleCloser = (*clientConnPool)(nil)
+	_ clientConnPoolIdleCloser = noDialClientConnPool{}
+)
+
+// TODO: use singleflight for dialing and addConnCalls?
+type clientConnPool struct {
+	t *Transport
+
+	mu sync.Mutex // TODO: maybe switch to RWMutex
+	// TODO: add support for sharing conns based on cert names
+	// (e.g. share conn for googleapis.com and appspot.com)
+	conns        map[string][]*ClientConn // key is host:port
+	dialing      map[string]*dialCall     // currently in-flight dials
+	keys         map[*ClientConn][]string
+	addConnCalls map[string]*addConnCall // in-flight addConnIfNeede calls
+}
+
+func (p *clientConnPool) GetClientConn(req *http.Request, addr string) (*ClientConn, error) {
+	return p.getClientConn(req, addr, dialOnMiss)
+}
+
+const (
+	dialOnMiss   = true
+	noDialOnMiss = false
+)
+
+// shouldTraceGetConn reports whether getClientConn should call any
+// ClientTrace.GetConn hook associated with the http.Request.
+//
+// This complexity is needed to avoid double calls of the GetConn hook
+// during the back-and-forth between net/http and x/net/http2 (when the
+// net/http.Transport is upgraded to also speak http2), as well as support
+// the case where x/net/http2 is being used directly.
+func (p *clientConnPool) shouldTraceGetConn(st clientConnIdleState) bool {
+	// If our Transport wasn't made via ConfigureTransport, always
+	// trace the GetConn hook if provided, because that means the
+	// http2 package is being used directly and it's the one
+	// dialing, as opposed to net/http.
+	if _, ok := p.t.ConnPool.(noDialClientConnPool); !ok {
+		return true
+	}
+	// Otherwise, only use the GetConn hook if this connection has
+	// been used previously for other requests. For fresh
+	// connections, the net/http package does the dialing.
+	return !st.freshConn
+}
+
+func (p *clientConnPool) getClientConn(req *http.Request, addr string, dialOnMiss bool) (*ClientConn, error) {
+	if isConnectionCloseRequest(req) && dialOnMiss {
+		// It gets its own connection.
+		traceGetConn(req, addr)
+		const singleUse = true
+		cc, err := p.t.dialClientConn(addr, singleUse)
+		if err != nil {
+			return nil, err
+		}
+		return cc, nil
+	}
+	p.mu.Lock()
+	for _, cc := range p.conns[addr] {
+		if st := cc.idleState(); st.canTakeNewRequest {
+			if p.shouldTraceGetConn(st) {
+				traceGetConn(req, addr)
+			}
+			p.mu.Unlock()
+			return cc, nil
+		}
+	}
+	if !dialOnMiss {
+		p.mu.Unlock()
+		return nil, ErrNoCachedConn
+	}
+	traceGetConn(req, addr)
+	call := p.getStartDialLocked(addr)
+	p.mu.Unlock()
+	<-call.done
+	return call.res, call.err
+}
+
+// dialCall is an in-flight Transport dial call to a host.
+type dialCall struct {
+	p    *clientConnPool
+	done chan struct{} // closed when done
+	res  *ClientConn   // valid after done is closed
+	err  error         // valid after done is closed
+}
+
+// requires p.mu is held.
+func (p *clientConnPool) getStartDialLocked(addr string) *dialCall {
+	if call, ok := p.dialing[addr]; ok {
+		// A dial is already in-flight. Don't start another.
+		return call
+	}
+	call := &dialCall{p: p, done: make(chan struct{})}
+	if p.dialing == nil {
+		p.dialing = make(map[string]*dialCall)
+	}
+	p.dialing[addr] = call
+	go call.dial(addr)
+	return call
+}
+
+// run in its own goroutine.
+func (c *dialCall) dial(addr string) {
+	const singleUse = false // shared conn
+	c.res, c.err = c.p.t.dialClientConn(addr, singleUse)
+	close(c.done)
+
+	c.p.mu.Lock()
+	delete(c.p.dialing, addr)
+	if c.err == nil {
+		c.p.addConnLocked(addr, c.res)
+	}
+	c.p.mu.Unlock()
+}
+
+// addConnIfNeeded makes a NewClientConn out of c if a connection for key doesn't
+// already exist. It coalesces concurrent calls with the same key.
+// This is used by the http1 Transport code when it creates a new connection. Because
+// the http1 Transport doesn't de-dup TCP dials to outbound hosts (because it doesn't know
+// the protocol), it can get into a situation where it has multiple TLS connections.
+// This code decides which ones live or die.
+// The return value used is whether c was used.
+// c is never closed.
+func (p *clientConnPool) addConnIfNeeded(key string, t *Transport, c *tls.Conn) (used bool, err error) {
+	p.mu.Lock()
+	for _, cc := range p.conns[key] {
+		if cc.CanTakeNewRequest() {
+			p.mu.Unlock()
+			return false, nil
+		}
+	}
+	call, dup := p.addConnCalls[key]
+	if !dup {
+		if p.addConnCalls == nil {
+			p.addConnCalls = make(map[string]*addConnCall)
+		}
+		call = &addConnCall{
+			p:    p,
+			done: make(chan struct{}),
+		}
+		p.addConnCalls[key] = call
+		go call.run(t, key, c)
+	}
+	p.mu.Unlock()
+
+	<-call.done
+	if call.err != nil {
+		return false, call.err
+	}
+	return !dup, nil
+}
+
+type addConnCall struct {
+	p    *clientConnPool
+	done chan struct{} // closed when done
+	err  error
+}
+
+func (c *addConnCall) run(t *Transport, key string, tc *tls.Conn) {
+	cc, err := t.NewClientConn(tc)
+
+	p := c.p
+	p.mu.Lock()
+	if err != nil {
+		c.err = err
+	} else {
+		p.addConnLocked(key, cc)
+	}
+	delete(p.addConnCalls, key)
+	p.mu.Unlock()
+	close(c.done)
+}
+
+func (p *clientConnPool) addConn(key string, cc *ClientConn) {
+	p.mu.Lock()
+	p.addConnLocked(key, cc)
+	p.mu.Unlock()
+}
+
+// p.mu must be held
+func (p *clientConnPool) addConnLocked(key string, cc *ClientConn) {
+	for _, v := range p.conns[key] {
+		if v == cc {
+			return
+		}
+	}
+	if p.conns == nil {
+		p.conns = make(map[string][]*ClientConn)
+	}
+	if p.keys == nil {
+		p.keys = make(map[*ClientConn][]string)
+	}
+	p.conns[key] = append(p.conns[key], cc)
+	p.keys[cc] = append(p.keys[cc], key)
+}
+
+func (p *clientConnPool) MarkDead(cc *ClientConn) {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	for _, key := range p.keys[cc] {
+		vv, ok := p.conns[key]
+		if !ok {
+			continue
+		}
+		newList := filterOutClientConn(vv, cc)
+		if len(newList) > 0 {
+			p.conns[key] = newList
+		} else {
+			delete(p.conns, key)
+		}
+	}
+	delete(p.keys, cc)
+}
+
+func (p *clientConnPool) closeIdleConnections() {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	// TODO: don't close a cc if it was just added to the pool
+	// milliseconds ago and has never been used. There's currently
+	// a small race window with the HTTP/1 Transport's integration
+	// where it can add an idle conn just before using it, and
+	// somebody else can concurrently call CloseIdleConns and
+	// break some caller's RoundTrip.
+	for _, vv := range p.conns {
+		for _, cc := range vv {
+			cc.closeIfIdle()
+		}
+	}
+}
+
+func filterOutClientConn(in []*ClientConn, exclude *ClientConn) []*ClientConn {
+	out := in[:0]
+	for _, v := range in {
+		if v != exclude {
+			out = append(out, v)
+		}
+	}
+	// If we filtered it out, zero out the last item to prevent
+	// the GC from seeing it.
+	if len(in) != len(out) {
+		in[len(in)-1] = nil
+	}
+	return out
+}
+
+// noDialClientConnPool is an implementation of http2.ClientConnPool
+// which never dials. We let the HTTP/1.1 client dial and use its TLS
+// connection instead.
+type noDialClientConnPool struct{ *clientConnPool }
+
+func (p noDialClientConnPool) GetClientConn(req *http.Request, addr string) (*ClientConn, error) {
+	return p.getClientConn(req, addr, noDialOnMiss)
+}
diff --git a/vendor/golang.org/x/net/http2/databuffer.go b/vendor/golang.org/x/net/http2/databuffer.go
new file mode 100644
index 0000000..a3067f8
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/databuffer.go
@@ -0,0 +1,146 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"errors"
+	"fmt"
+	"sync"
+)
+
+// Buffer chunks are allocated from a pool to reduce pressure on GC.
+// The maximum wasted space per dataBuffer is 2x the largest size class,
+// which happens when the dataBuffer has multiple chunks and there is
+// one unread byte in both the first and last chunks. We use a few size
+// classes to minimize overheads for servers that typically receive very
+// small request bodies.
+//
+// TODO: Benchmark to determine if the pools are necessary. The GC may have
+// improved enough that we can instead allocate chunks like this:
+// make([]byte, max(16<<10, expectedBytesRemaining))
+var (
+	dataChunkSizeClasses = []int{
+		1 << 10,
+		2 << 10,
+		4 << 10,
+		8 << 10,
+		16 << 10,
+	}
+	dataChunkPools = [...]sync.Pool{
+		{New: func() interface{} { return make([]byte, 1<<10) }},
+		{New: func() interface{} { return make([]byte, 2<<10) }},
+		{New: func() interface{} { return make([]byte, 4<<10) }},
+		{New: func() interface{} { return make([]byte, 8<<10) }},
+		{New: func() interface{} { return make([]byte, 16<<10) }},
+	}
+)
+
+func getDataBufferChunk(size int64) []byte {
+	i := 0
+	for ; i < len(dataChunkSizeClasses)-1; i++ {
+		if size <= int64(dataChunkSizeClasses[i]) {
+			break
+		}
+	}
+	return dataChunkPools[i].Get().([]byte)
+}
+
+func putDataBufferChunk(p []byte) {
+	for i, n := range dataChunkSizeClasses {
+		if len(p) == n {
+			dataChunkPools[i].Put(p)
+			return
+		}
+	}
+	panic(fmt.Sprintf("unexpected buffer len=%v", len(p)))
+}
+
+// dataBuffer is an io.ReadWriter backed by a list of data chunks.
+// Each dataBuffer is used to read DATA frames on a single stream.
+// The buffer is divided into chunks so the server can limit the
+// total memory used by a single connection without limiting the
+// request body size on any single stream.
+type dataBuffer struct {
+	chunks   [][]byte
+	r        int   // next byte to read is chunks[0][r]
+	w        int   // next byte to write is chunks[len(chunks)-1][w]
+	size     int   // total buffered bytes
+	expected int64 // we expect at least this many bytes in future Write calls (ignored if <= 0)
+}
+
+var errReadEmpty = errors.New("read from empty dataBuffer")
+
+// Read copies bytes from the buffer into p.
+// It is an error to read when no data is available.
+func (b *dataBuffer) Read(p []byte) (int, error) {
+	if b.size == 0 {
+		return 0, errReadEmpty
+	}
+	var ntotal int
+	for len(p) > 0 && b.size > 0 {
+		readFrom := b.bytesFromFirstChunk()
+		n := copy(p, readFrom)
+		p = p[n:]
+		ntotal += n
+		b.r += n
+		b.size -= n
+		// If the first chunk has been consumed, advance to the next chunk.
+		if b.r == len(b.chunks[0]) {
+			putDataBufferChunk(b.chunks[0])
+			end := len(b.chunks) - 1
+			copy(b.chunks[:end], b.chunks[1:])
+			b.chunks[end] = nil
+			b.chunks = b.chunks[:end]
+			b.r = 0
+		}
+	}
+	return ntotal, nil
+}
+
+func (b *dataBuffer) bytesFromFirstChunk() []byte {
+	if len(b.chunks) == 1 {
+		return b.chunks[0][b.r:b.w]
+	}
+	return b.chunks[0][b.r:]
+}
+
+// Len returns the number of bytes of the unread portion of the buffer.
+func (b *dataBuffer) Len() int {
+	return b.size
+}
+
+// Write appends p to the buffer.
+func (b *dataBuffer) Write(p []byte) (int, error) {
+	ntotal := len(p)
+	for len(p) > 0 {
+		// If the last chunk is empty, allocate a new chunk. Try to allocate
+		// enough to fully copy p plus any additional bytes we expect to
+		// receive. However, this may allocate less than len(p).
+		want := int64(len(p))
+		if b.expected > want {
+			want = b.expected
+		}
+		chunk := b.lastChunkOrAlloc(want)
+		n := copy(chunk[b.w:], p)
+		p = p[n:]
+		b.w += n
+		b.size += n
+		b.expected -= int64(n)
+	}
+	return ntotal, nil
+}
+
+func (b *dataBuffer) lastChunkOrAlloc(want int64) []byte {
+	if len(b.chunks) != 0 {
+		last := b.chunks[len(b.chunks)-1]
+		if b.w < len(last) {
+			return last
+		}
+	}
+	chunk := getDataBufferChunk(want)
+	b.chunks = append(b.chunks, chunk)
+	b.w = 0
+	return chunk
+}
diff --git a/vendor/golang.org/x/net/http2/errors.go b/vendor/golang.org/x/net/http2/errors.go
new file mode 100644
index 0000000..71f2c46
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/errors.go
@@ -0,0 +1,133 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"errors"
+	"fmt"
+)
+
+// An ErrCode is an unsigned 32-bit error code as defined in the HTTP/2 spec.
+type ErrCode uint32
+
+const (
+	ErrCodeNo                 ErrCode = 0x0
+	ErrCodeProtocol           ErrCode = 0x1
+	ErrCodeInternal           ErrCode = 0x2
+	ErrCodeFlowControl        ErrCode = 0x3
+	ErrCodeSettingsTimeout    ErrCode = 0x4
+	ErrCodeStreamClosed       ErrCode = 0x5
+	ErrCodeFrameSize          ErrCode = 0x6
+	ErrCodeRefusedStream      ErrCode = 0x7
+	ErrCodeCancel             ErrCode = 0x8
+	ErrCodeCompression        ErrCode = 0x9
+	ErrCodeConnect            ErrCode = 0xa
+	ErrCodeEnhanceYourCalm    ErrCode = 0xb
+	ErrCodeInadequateSecurity ErrCode = 0xc
+	ErrCodeHTTP11Required     ErrCode = 0xd
+)
+
+var errCodeName = map[ErrCode]string{
+	ErrCodeNo:                 "NO_ERROR",
+	ErrCodeProtocol:           "PROTOCOL_ERROR",
+	ErrCodeInternal:           "INTERNAL_ERROR",
+	ErrCodeFlowControl:        "FLOW_CONTROL_ERROR",
+	ErrCodeSettingsTimeout:    "SETTINGS_TIMEOUT",
+	ErrCodeStreamClosed:       "STREAM_CLOSED",
+	ErrCodeFrameSize:          "FRAME_SIZE_ERROR",
+	ErrCodeRefusedStream:      "REFUSED_STREAM",
+	ErrCodeCancel:             "CANCEL",
+	ErrCodeCompression:        "COMPRESSION_ERROR",
+	ErrCodeConnect:            "CONNECT_ERROR",
+	ErrCodeEnhanceYourCalm:    "ENHANCE_YOUR_CALM",
+	ErrCodeInadequateSecurity: "INADEQUATE_SECURITY",
+	ErrCodeHTTP11Required:     "HTTP_1_1_REQUIRED",
+}
+
+func (e ErrCode) String() string {
+	if s, ok := errCodeName[e]; ok {
+		return s
+	}
+	return fmt.Sprintf("unknown error code 0x%x", uint32(e))
+}
+
+// ConnectionError is an error that results in the termination of the
+// entire connection.
+type ConnectionError ErrCode
+
+func (e ConnectionError) Error() string { return fmt.Sprintf("connection error: %s", ErrCode(e)) }
+
+// StreamError is an error that only affects one stream within an
+// HTTP/2 connection.
+type StreamError struct {
+	StreamID uint32
+	Code     ErrCode
+	Cause    error // optional additional detail
+}
+
+func streamError(id uint32, code ErrCode) StreamError {
+	return StreamError{StreamID: id, Code: code}
+}
+
+func (e StreamError) Error() string {
+	if e.Cause != nil {
+		return fmt.Sprintf("stream error: stream ID %d; %v; %v", e.StreamID, e.Code, e.Cause)
+	}
+	return fmt.Sprintf("stream error: stream ID %d; %v", e.StreamID, e.Code)
+}
+
+// 6.9.1 The Flow Control Window
+// "If a sender receives a WINDOW_UPDATE that causes a flow control
+// window to exceed this maximum it MUST terminate either the stream
+// or the connection, as appropriate. For streams, [...]; for the
+// connection, a GOAWAY frame with a FLOW_CONTROL_ERROR code."
+type goAwayFlowError struct{}
+
+func (goAwayFlowError) Error() string { return "connection exceeded flow control window size" }
+
+// connError represents an HTTP/2 ConnectionError error code, along
+// with a string (for debugging) explaining why.
+//
+// Errors of this type are only returned by the frame parser functions
+// and converted into ConnectionError(Code), after stashing away
+// the Reason into the Framer's errDetail field, accessible via
+// the (*Framer).ErrorDetail method.
+type connError struct {
+	Code   ErrCode // the ConnectionError error code
+	Reason string  // additional reason
+}
+
+func (e connError) Error() string {
+	return fmt.Sprintf("http2: connection error: %v: %v", e.Code, e.Reason)
+}
+
+type pseudoHeaderError string
+
+func (e pseudoHeaderError) Error() string {
+	return fmt.Sprintf("invalid pseudo-header %q", string(e))
+}
+
+type duplicatePseudoHeaderError string
+
+func (e duplicatePseudoHeaderError) Error() string {
+	return fmt.Sprintf("duplicate pseudo-header %q", string(e))
+}
+
+type headerFieldNameError string
+
+func (e headerFieldNameError) Error() string {
+	return fmt.Sprintf("invalid header field name %q", string(e))
+}
+
+type headerFieldValueError string
+
+func (e headerFieldValueError) Error() string {
+	return fmt.Sprintf("invalid header field value %q", string(e))
+}
+
+var (
+	errMixPseudoHeaderTypes = errors.New("mix of request and response pseudo headers")
+	errPseudoAfterRegular   = errors.New("pseudo header field after regular")
+)
diff --git a/vendor/golang.org/x/net/http2/flow.go b/vendor/golang.org/x/net/http2/flow.go
new file mode 100644
index 0000000..cea601f
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/flow.go
@@ -0,0 +1,50 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Flow control
+
+package http2
+
+// flow is the flow control window's size.
+type flow struct {
+	// n is the number of DATA bytes we're allowed to send.
+	// A flow is kept both on a conn and a per-stream.
+	n int32
+
+	// conn points to the shared connection-level flow that is
+	// shared by all streams on that conn. It is nil for the flow
+	// that's on the conn directly.
+	conn *flow
+}
+
+func (f *flow) setConnFlow(cf *flow) { f.conn = cf }
+
+func (f *flow) available() int32 {
+	n := f.n
+	if f.conn != nil && f.conn.n < n {
+		n = f.conn.n
+	}
+	return n
+}
+
+func (f *flow) take(n int32) {
+	if n > f.available() {
+		panic("internal error: took too much")
+	}
+	f.n -= n
+	if f.conn != nil {
+		f.conn.n -= n
+	}
+}
+
+// add adds n bytes (positive or negative) to the flow control window.
+// It returns false if the sum would exceed 2^31-1.
+func (f *flow) add(n int32) bool {
+	sum := f.n + n
+	if (sum > n) == (f.n > 0) {
+		f.n = sum
+		return true
+	}
+	return false
+}
diff --git a/vendor/golang.org/x/net/http2/frame.go b/vendor/golang.org/x/net/http2/frame.go
new file mode 100644
index 0000000..514c126
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/frame.go
@@ -0,0 +1,1614 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"bytes"
+	"encoding/binary"
+	"errors"
+	"fmt"
+	"io"
+	"log"
+	"strings"
+	"sync"
+
+	"golang.org/x/net/http/httpguts"
+	"golang.org/x/net/http2/hpack"
+)
+
+const frameHeaderLen = 9
+
+var padZeros = make([]byte, 255) // zeros for padding
+
+// A FrameType is a registered frame type as defined in
+// http://http2.github.io/http2-spec/#rfc.section.11.2
+type FrameType uint8
+
+const (
+	FrameData         FrameType = 0x0
+	FrameHeaders      FrameType = 0x1
+	FramePriority     FrameType = 0x2
+	FrameRSTStream    FrameType = 0x3
+	FrameSettings     FrameType = 0x4
+	FramePushPromise  FrameType = 0x5
+	FramePing         FrameType = 0x6
+	FrameGoAway       FrameType = 0x7
+	FrameWindowUpdate FrameType = 0x8
+	FrameContinuation FrameType = 0x9
+)
+
+var frameName = map[FrameType]string{
+	FrameData:         "DATA",
+	FrameHeaders:      "HEADERS",
+	FramePriority:     "PRIORITY",
+	FrameRSTStream:    "RST_STREAM",
+	FrameSettings:     "SETTINGS",
+	FramePushPromise:  "PUSH_PROMISE",
+	FramePing:         "PING",
+	FrameGoAway:       "GOAWAY",
+	FrameWindowUpdate: "WINDOW_UPDATE",
+	FrameContinuation: "CONTINUATION",
+}
+
+func (t FrameType) String() string {
+	if s, ok := frameName[t]; ok {
+		return s
+	}
+	return fmt.Sprintf("UNKNOWN_FRAME_TYPE_%d", uint8(t))
+}
+
+// Flags is a bitmask of HTTP/2 flags.
+// The meaning of flags varies depending on the frame type.
+type Flags uint8
+
+// Has reports whether f contains all (0 or more) flags in v.
+func (f Flags) Has(v Flags) bool {
+	return (f & v) == v
+}
+
+// Frame-specific FrameHeader flag bits.
+const (
+	// Data Frame
+	FlagDataEndStream Flags = 0x1
+	FlagDataPadded    Flags = 0x8
+
+	// Headers Frame
+	FlagHeadersEndStream  Flags = 0x1
+	FlagHeadersEndHeaders Flags = 0x4
+	FlagHeadersPadded     Flags = 0x8
+	FlagHeadersPriority   Flags = 0x20
+
+	// Settings Frame
+	FlagSettingsAck Flags = 0x1
+
+	// Ping Frame
+	FlagPingAck Flags = 0x1
+
+	// Continuation Frame
+	FlagContinuationEndHeaders Flags = 0x4
+
+	FlagPushPromiseEndHeaders Flags = 0x4
+	FlagPushPromisePadded     Flags = 0x8
+)
+
+var flagName = map[FrameType]map[Flags]string{
+	FrameData: {
+		FlagDataEndStream: "END_STREAM",
+		FlagDataPadded:    "PADDED",
+	},
+	FrameHeaders: {
+		FlagHeadersEndStream:  "END_STREAM",
+		FlagHeadersEndHeaders: "END_HEADERS",
+		FlagHeadersPadded:     "PADDED",
+		FlagHeadersPriority:   "PRIORITY",
+	},
+	FrameSettings: {
+		FlagSettingsAck: "ACK",
+	},
+	FramePing: {
+		FlagPingAck: "ACK",
+	},
+	FrameContinuation: {
+		FlagContinuationEndHeaders: "END_HEADERS",
+	},
+	FramePushPromise: {
+		FlagPushPromiseEndHeaders: "END_HEADERS",
+		FlagPushPromisePadded:     "PADDED",
+	},
+}
+
+// a frameParser parses a frame given its FrameHeader and payload
+// bytes. The length of payload will always equal fh.Length (which
+// might be 0).
+type frameParser func(fc *frameCache, fh FrameHeader, payload []byte) (Frame, error)
+
+var frameParsers = map[FrameType]frameParser{
+	FrameData:         parseDataFrame,
+	FrameHeaders:      parseHeadersFrame,
+	FramePriority:     parsePriorityFrame,
+	FrameRSTStream:    parseRSTStreamFrame,
+	FrameSettings:     parseSettingsFrame,
+	FramePushPromise:  parsePushPromise,
+	FramePing:         parsePingFrame,
+	FrameGoAway:       parseGoAwayFrame,
+	FrameWindowUpdate: parseWindowUpdateFrame,
+	FrameContinuation: parseContinuationFrame,
+}
+
+func typeFrameParser(t FrameType) frameParser {
+	if f := frameParsers[t]; f != nil {
+		return f
+	}
+	return parseUnknownFrame
+}
+
+// A FrameHeader is the 9 byte header of all HTTP/2 frames.
+//
+// See http://http2.github.io/http2-spec/#FrameHeader
+type FrameHeader struct {
+	valid bool // caller can access []byte fields in the Frame
+
+	// Type is the 1 byte frame type. There are ten standard frame
+	// types, but extension frame types may be written by WriteRawFrame
+	// and will be returned by ReadFrame (as UnknownFrame).
+	Type FrameType
+
+	// Flags are the 1 byte of 8 potential bit flags per frame.
+	// They are specific to the frame type.
+	Flags Flags
+
+	// Length is the length of the frame, not including the 9 byte header.
+	// The maximum size is one byte less than 16MB (uint24), but only
+	// frames up to 16KB are allowed without peer agreement.
+	Length uint32
+
+	// StreamID is which stream this frame is for. Certain frames
+	// are not stream-specific, in which case this field is 0.
+	StreamID uint32
+}
+
+// Header returns h. It exists so FrameHeaders can be embedded in other
+// specific frame types and implement the Frame interface.
+func (h FrameHeader) Header() FrameHeader { return h }
+
+func (h FrameHeader) String() string {
+	var buf bytes.Buffer
+	buf.WriteString("[FrameHeader ")
+	h.writeDebug(&buf)
+	buf.WriteByte(']')
+	return buf.String()
+}
+
+func (h FrameHeader) writeDebug(buf *bytes.Buffer) {
+	buf.WriteString(h.Type.String())
+	if h.Flags != 0 {
+		buf.WriteString(" flags=")
+		set := 0
+		for i := uint8(0); i < 8; i++ {
+			if h.Flags&(1<<i) == 0 {
+				continue
+			}
+			set++
+			if set > 1 {
+				buf.WriteByte('|')
+			}
+			name := flagName[h.Type][Flags(1<<i)]
+			if name != "" {
+				buf.WriteString(name)
+			} else {
+				fmt.Fprintf(buf, "0x%x", 1<<i)
+			}
+		}
+	}
+	if h.StreamID != 0 {
+		fmt.Fprintf(buf, " stream=%d", h.StreamID)
+	}
+	fmt.Fprintf(buf, " len=%d", h.Length)
+}
+
+func (h *FrameHeader) checkValid() {
+	if !h.valid {
+		panic("Frame accessor called on non-owned Frame")
+	}
+}
+
+func (h *FrameHeader) invalidate() { h.valid = false }
+
+// frame header bytes.
+// Used only by ReadFrameHeader.
+var fhBytes = sync.Pool{
+	New: func() interface{} {
+		buf := make([]byte, frameHeaderLen)
+		return &buf
+	},
+}
+
+// ReadFrameHeader reads 9 bytes from r and returns a FrameHeader.
+// Most users should use Framer.ReadFrame instead.
+func ReadFrameHeader(r io.Reader) (FrameHeader, error) {
+	bufp := fhBytes.Get().(*[]byte)
+	defer fhBytes.Put(bufp)
+	return readFrameHeader(*bufp, r)
+}
+
+func readFrameHeader(buf []byte, r io.Reader) (FrameHeader, error) {
+	_, err := io.ReadFull(r, buf[:frameHeaderLen])
+	if err != nil {
+		return FrameHeader{}, err
+	}
+	return FrameHeader{
+		Length:   (uint32(buf[0])<<16 | uint32(buf[1])<<8 | uint32(buf[2])),
+		Type:     FrameType(buf[3]),
+		Flags:    Flags(buf[4]),
+		StreamID: binary.BigEndian.Uint32(buf[5:]) & (1<<31 - 1),
+		valid:    true,
+	}, nil
+}
+
+// A Frame is the base interface implemented by all frame types.
+// Callers will generally type-assert the specific frame type:
+// *HeadersFrame, *SettingsFrame, *WindowUpdateFrame, etc.
+//
+// Frames are only valid until the next call to Framer.ReadFrame.
+type Frame interface {
+	Header() FrameHeader
+
+	// invalidate is called by Framer.ReadFrame to make this
+	// frame's buffers as being invalid, since the subsequent
+	// frame will reuse them.
+	invalidate()
+}
+
+// A Framer reads and writes Frames.
+type Framer struct {
+	r         io.Reader
+	lastFrame Frame
+	errDetail error
+
+	// lastHeaderStream is non-zero if the last frame was an
+	// unfinished HEADERS/CONTINUATION.
+	lastHeaderStream uint32
+
+	maxReadSize uint32
+	headerBuf   [frameHeaderLen]byte
+
+	// TODO: let getReadBuf be configurable, and use a less memory-pinning
+	// allocator in server.go to minimize memory pinned for many idle conns.
+	// Will probably also need to make frame invalidation have a hook too.
+	getReadBuf func(size uint32) []byte
+	readBuf    []byte // cache for default getReadBuf
+
+	maxWriteSize uint32 // zero means unlimited; TODO: implement
+
+	w    io.Writer
+	wbuf []byte
+
+	// AllowIllegalWrites permits the Framer's Write methods to
+	// write frames that do not conform to the HTTP/2 spec. This
+	// permits using the Framer to test other HTTP/2
+	// implementations' conformance to the spec.
+	// If false, the Write methods will prefer to return an error
+	// rather than comply.
+	AllowIllegalWrites bool
+
+	// AllowIllegalReads permits the Framer's ReadFrame method
+	// to return non-compliant frames or frame orders.
+	// This is for testing and permits using the Framer to test
+	// other HTTP/2 implementations' conformance to the spec.
+	// It is not compatible with ReadMetaHeaders.
+	AllowIllegalReads bool
+
+	// ReadMetaHeaders if non-nil causes ReadFrame to merge
+	// HEADERS and CONTINUATION frames together and return
+	// MetaHeadersFrame instead.
+	ReadMetaHeaders *hpack.Decoder
+
+	// MaxHeaderListSize is the http2 MAX_HEADER_LIST_SIZE.
+	// It's used only if ReadMetaHeaders is set; 0 means a sane default
+	// (currently 16MB)
+	// If the limit is hit, MetaHeadersFrame.Truncated is set true.
+	MaxHeaderListSize uint32
+
+	// TODO: track which type of frame & with which flags was sent
+	// last. Then return an error (unless AllowIllegalWrites) if
+	// we're in the middle of a header block and a
+	// non-Continuation or Continuation on a different stream is
+	// attempted to be written.
+
+	logReads, logWrites bool
+
+	debugFramer       *Framer // only use for logging written writes
+	debugFramerBuf    *bytes.Buffer
+	debugReadLoggerf  func(string, ...interface{})
+	debugWriteLoggerf func(string, ...interface{})
+
+	frameCache *frameCache // nil if frames aren't reused (default)
+}
+
+func (fr *Framer) maxHeaderListSize() uint32 {
+	if fr.MaxHeaderListSize == 0 {
+		return 16 << 20 // sane default, per docs
+	}
+	return fr.MaxHeaderListSize
+}
+
+func (f *Framer) startWrite(ftype FrameType, flags Flags, streamID uint32) {
+	// Write the FrameHeader.
+	f.wbuf = append(f.wbuf[:0],
+		0, // 3 bytes of length, filled in in endWrite
+		0,
+		0,
+		byte(ftype),
+		byte(flags),
+		byte(streamID>>24),
+		byte(streamID>>16),
+		byte(streamID>>8),
+		byte(streamID))
+}
+
+func (f *Framer) endWrite() error {
+	// Now that we know the final size, fill in the FrameHeader in
+	// the space previously reserved for it. Abuse append.
+	length := len(f.wbuf) - frameHeaderLen
+	if length >= (1 << 24) {
+		return ErrFrameTooLarge
+	}
+	_ = append(f.wbuf[:0],
+		byte(length>>16),
+		byte(length>>8),
+		byte(length))
+	if f.logWrites {
+		f.logWrite()
+	}
+
+	n, err := f.w.Write(f.wbuf)
+	if err == nil && n != len(f.wbuf) {
+		err = io.ErrShortWrite
+	}
+	return err
+}
+
+func (f *Framer) logWrite() {
+	if f.debugFramer == nil {
+		f.debugFramerBuf = new(bytes.Buffer)
+		f.debugFramer = NewFramer(nil, f.debugFramerBuf)
+		f.debugFramer.logReads = false // we log it ourselves, saying "wrote" below
+		// Let us read anything, even if we accidentally wrote it
+		// in the wrong order:
+		f.debugFramer.AllowIllegalReads = true
+	}
+	f.debugFramerBuf.Write(f.wbuf)
+	fr, err := f.debugFramer.ReadFrame()
+	if err != nil {
+		f.debugWriteLoggerf("http2: Framer %p: failed to decode just-written frame", f)
+		return
+	}
+	f.debugWriteLoggerf("http2: Framer %p: wrote %v", f, summarizeFrame(fr))
+}
+
+func (f *Framer) writeByte(v byte)     { f.wbuf = append(f.wbuf, v) }
+func (f *Framer) writeBytes(v []byte)  { f.wbuf = append(f.wbuf, v...) }
+func (f *Framer) writeUint16(v uint16) { f.wbuf = append(f.wbuf, byte(v>>8), byte(v)) }
+func (f *Framer) writeUint32(v uint32) {
+	f.wbuf = append(f.wbuf, byte(v>>24), byte(v>>16), byte(v>>8), byte(v))
+}
+
+const (
+	minMaxFrameSize = 1 << 14
+	maxFrameSize    = 1<<24 - 1
+)
+
+// SetReuseFrames allows the Framer to reuse Frames.
+// If called on a Framer, Frames returned by calls to ReadFrame are only
+// valid until the next call to ReadFrame.
+func (fr *Framer) SetReuseFrames() {
+	if fr.frameCache != nil {
+		return
+	}
+	fr.frameCache = &frameCache{}
+}
+
+type frameCache struct {
+	dataFrame DataFrame
+}
+
+func (fc *frameCache) getDataFrame() *DataFrame {
+	if fc == nil {
+		return &DataFrame{}
+	}
+	return &fc.dataFrame
+}
+
+// NewFramer returns a Framer that writes frames to w and reads them from r.
+func NewFramer(w io.Writer, r io.Reader) *Framer {
+	fr := &Framer{
+		w:                 w,
+		r:                 r,
+		logReads:          logFrameReads,
+		logWrites:         logFrameWrites,
+		debugReadLoggerf:  log.Printf,
+		debugWriteLoggerf: log.Printf,
+	}
+	fr.getReadBuf = func(size uint32) []byte {
+		if cap(fr.readBuf) >= int(size) {
+			return fr.readBuf[:size]
+		}
+		fr.readBuf = make([]byte, size)
+		return fr.readBuf
+	}
+	fr.SetMaxReadFrameSize(maxFrameSize)
+	return fr
+}
+
+// SetMaxReadFrameSize sets the maximum size of a frame
+// that will be read by a subsequent call to ReadFrame.
+// It is the caller's responsibility to advertise this
+// limit with a SETTINGS frame.
+func (fr *Framer) SetMaxReadFrameSize(v uint32) {
+	if v > maxFrameSize {
+		v = maxFrameSize
+	}
+	fr.maxReadSize = v
+}
+
+// ErrorDetail returns a more detailed error of the last error
+// returned by Framer.ReadFrame. For instance, if ReadFrame
+// returns a StreamError with code PROTOCOL_ERROR, ErrorDetail
+// will say exactly what was invalid. ErrorDetail is not guaranteed
+// to return a non-nil value and like the rest of the http2 package,
+// its return value is not protected by an API compatibility promise.
+// ErrorDetail is reset after the next call to ReadFrame.
+func (fr *Framer) ErrorDetail() error {
+	return fr.errDetail
+}
+
+// ErrFrameTooLarge is returned from Framer.ReadFrame when the peer
+// sends a frame that is larger than declared with SetMaxReadFrameSize.
+var ErrFrameTooLarge = errors.New("http2: frame too large")
+
+// terminalReadFrameError reports whether err is an unrecoverable
+// error from ReadFrame and no other frames should be read.
+func terminalReadFrameError(err error) bool {
+	if _, ok := err.(StreamError); ok {
+		return false
+	}
+	return err != nil
+}
+
+// ReadFrame reads a single frame. The returned Frame is only valid
+// until the next call to ReadFrame.
+//
+// If the frame is larger than previously set with SetMaxReadFrameSize, the
+// returned error is ErrFrameTooLarge. Other errors may be of type
+// ConnectionError, StreamError, or anything else from the underlying
+// reader.
+func (fr *Framer) ReadFrame() (Frame, error) {
+	fr.errDetail = nil
+	if fr.lastFrame != nil {
+		fr.lastFrame.invalidate()
+	}
+	fh, err := readFrameHeader(fr.headerBuf[:], fr.r)
+	if err != nil {
+		return nil, err
+	}
+	if fh.Length > fr.maxReadSize {
+		return nil, ErrFrameTooLarge
+	}
+	payload := fr.getReadBuf(fh.Length)
+	if _, err := io.ReadFull(fr.r, payload); err != nil {
+		return nil, err
+	}
+	f, err := typeFrameParser(fh.Type)(fr.frameCache, fh, payload)
+	if err != nil {
+		if ce, ok := err.(connError); ok {
+			return nil, fr.connError(ce.Code, ce.Reason)
+		}
+		return nil, err
+	}
+	if err := fr.checkFrameOrder(f); err != nil {
+		return nil, err
+	}
+	if fr.logReads {
+		fr.debugReadLoggerf("http2: Framer %p: read %v", fr, summarizeFrame(f))
+	}
+	if fh.Type == FrameHeaders && fr.ReadMetaHeaders != nil {
+		return fr.readMetaFrame(f.(*HeadersFrame))
+	}
+	return f, nil
+}
+
+// connError returns ConnectionError(code) but first
+// stashes away a public reason to the caller can optionally relay it
+// to the peer before hanging up on them. This might help others debug
+// their implementations.
+func (fr *Framer) connError(code ErrCode, reason string) error {
+	fr.errDetail = errors.New(reason)
+	return ConnectionError(code)
+}
+
+// checkFrameOrder reports an error if f is an invalid frame to return
+// next from ReadFrame. Mostly it checks whether HEADERS and
+// CONTINUATION frames are contiguous.
+func (fr *Framer) checkFrameOrder(f Frame) error {
+	last := fr.lastFrame
+	fr.lastFrame = f
+	if fr.AllowIllegalReads {
+		return nil
+	}
+
+	fh := f.Header()
+	if fr.lastHeaderStream != 0 {
+		if fh.Type != FrameContinuation {
+			return fr.connError(ErrCodeProtocol,
+				fmt.Sprintf("got %s for stream %d; expected CONTINUATION following %s for stream %d",
+					fh.Type, fh.StreamID,
+					last.Header().Type, fr.lastHeaderStream))
+		}
+		if fh.StreamID != fr.lastHeaderStream {
+			return fr.connError(ErrCodeProtocol,
+				fmt.Sprintf("got CONTINUATION for stream %d; expected stream %d",
+					fh.StreamID, fr.lastHeaderStream))
+		}
+	} else if fh.Type == FrameContinuation {
+		return fr.connError(ErrCodeProtocol, fmt.Sprintf("unexpected CONTINUATION for stream %d", fh.StreamID))
+	}
+
+	switch fh.Type {
+	case FrameHeaders, FrameContinuation:
+		if fh.Flags.Has(FlagHeadersEndHeaders) {
+			fr.lastHeaderStream = 0
+		} else {
+			fr.lastHeaderStream = fh.StreamID
+		}
+	}
+
+	return nil
+}
+
+// A DataFrame conveys arbitrary, variable-length sequences of octets
+// associated with a stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.1
+type DataFrame struct {
+	FrameHeader
+	data []byte
+}
+
+func (f *DataFrame) StreamEnded() bool {
+	return f.FrameHeader.Flags.Has(FlagDataEndStream)
+}
+
+// Data returns the frame's data octets, not including any padding
+// size byte or padding suffix bytes.
+// The caller must not retain the returned memory past the next
+// call to ReadFrame.
+func (f *DataFrame) Data() []byte {
+	f.checkValid()
+	return f.data
+}
+
+func parseDataFrame(fc *frameCache, fh FrameHeader, payload []byte) (Frame, error) {
+	if fh.StreamID == 0 {
+		// DATA frames MUST be associated with a stream. If a
+		// DATA frame is received whose stream identifier
+		// field is 0x0, the recipient MUST respond with a
+		// connection error (Section 5.4.1) of type
+		// PROTOCOL_ERROR.
+		return nil, connError{ErrCodeProtocol, "DATA frame with stream ID 0"}
+	}
+	f := fc.getDataFrame()
+	f.FrameHeader = fh
+
+	var padSize byte
+	if fh.Flags.Has(FlagDataPadded) {
+		var err error
+		payload, padSize, err = readByte(payload)
+		if err != nil {
+			return nil, err
+		}
+	}
+	if int(padSize) > len(payload) {
+		// If the length of the padding is greater than the
+		// length of the frame payload, the recipient MUST
+		// treat this as a connection error.
+		// Filed: https://github.com/http2/http2-spec/issues/610
+		return nil, connError{ErrCodeProtocol, "pad size larger than data payload"}
+	}
+	f.data = payload[:len(payload)-int(padSize)]
+	return f, nil
+}
+
+var (
+	errStreamID    = errors.New("invalid stream ID")
+	errDepStreamID = errors.New("invalid dependent stream ID")
+	errPadLength   = errors.New("pad length too large")
+	errPadBytes    = errors.New("padding bytes must all be zeros unless AllowIllegalWrites is enabled")
+)
+
+func validStreamIDOrZero(streamID uint32) bool {
+	return streamID&(1<<31) == 0
+}
+
+func validStreamID(streamID uint32) bool {
+	return streamID != 0 && streamID&(1<<31) == 0
+}
+
+// WriteData writes a DATA frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility not to violate the maximum frame size
+// and to not call other Write methods concurrently.
+func (f *Framer) WriteData(streamID uint32, endStream bool, data []byte) error {
+	return f.WriteDataPadded(streamID, endStream, data, nil)
+}
+
+// WriteDataPadded writes a DATA frame with optional padding.
+//
+// If pad is nil, the padding bit is not sent.
+// The length of pad must not exceed 255 bytes.
+// The bytes of pad must all be zero, unless f.AllowIllegalWrites is set.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility not to violate the maximum frame size
+// and to not call other Write methods concurrently.
+func (f *Framer) WriteDataPadded(streamID uint32, endStream bool, data, pad []byte) error {
+	if !validStreamID(streamID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	if len(pad) > 0 {
+		if len(pad) > 255 {
+			return errPadLength
+		}
+		if !f.AllowIllegalWrites {
+			for _, b := range pad {
+				if b != 0 {
+					// "Padding octets MUST be set to zero when sending."
+					return errPadBytes
+				}
+			}
+		}
+	}
+	var flags Flags
+	if endStream {
+		flags |= FlagDataEndStream
+	}
+	if pad != nil {
+		flags |= FlagDataPadded
+	}
+	f.startWrite(FrameData, flags, streamID)
+	if pad != nil {
+		f.wbuf = append(f.wbuf, byte(len(pad)))
+	}
+	f.wbuf = append(f.wbuf, data...)
+	f.wbuf = append(f.wbuf, pad...)
+	return f.endWrite()
+}
+
+// A SettingsFrame conveys configuration parameters that affect how
+// endpoints communicate, such as preferences and constraints on peer
+// behavior.
+//
+// See http://http2.github.io/http2-spec/#SETTINGS
+type SettingsFrame struct {
+	FrameHeader
+	p []byte
+}
+
+func parseSettingsFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+	if fh.Flags.Has(FlagSettingsAck) && fh.Length > 0 {
+		// When this (ACK 0x1) bit is set, the payload of the
+		// SETTINGS frame MUST be empty. Receipt of a
+		// SETTINGS frame with the ACK flag set and a length
+		// field value other than 0 MUST be treated as a
+		// connection error (Section 5.4.1) of type
+		// FRAME_SIZE_ERROR.
+		return nil, ConnectionError(ErrCodeFrameSize)
+	}
+	if fh.StreamID != 0 {
+		// SETTINGS frames always apply to a connection,
+		// never a single stream. The stream identifier for a
+		// SETTINGS frame MUST be zero (0x0).  If an endpoint
+		// receives a SETTINGS frame whose stream identifier
+		// field is anything other than 0x0, the endpoint MUST
+		// respond with a connection error (Section 5.4.1) of
+		// type PROTOCOL_ERROR.
+		return nil, ConnectionError(ErrCodeProtocol)
+	}
+	if len(p)%6 != 0 {
+		// Expecting even number of 6 byte settings.
+		return nil, ConnectionError(ErrCodeFrameSize)
+	}
+	f := &SettingsFrame{FrameHeader: fh, p: p}
+	if v, ok := f.Value(SettingInitialWindowSize); ok && v > (1<<31)-1 {
+		// Values above the maximum flow control window size of 2^31 - 1 MUST
+		// be treated as a connection error (Section 5.4.1) of type
+		// FLOW_CONTROL_ERROR.
+		return nil, ConnectionError(ErrCodeFlowControl)
+	}
+	return f, nil
+}
+
+func (f *SettingsFrame) IsAck() bool {
+	return f.FrameHeader.Flags.Has(FlagSettingsAck)
+}
+
+func (f *SettingsFrame) Value(id SettingID) (v uint32, ok bool) {
+	f.checkValid()
+	for i := 0; i < f.NumSettings(); i++ {
+		if s := f.Setting(i); s.ID == id {
+			return s.Val, true
+		}
+	}
+	return 0, false
+}
+
+// Setting returns the setting from the frame at the given 0-based index.
+// The index must be >= 0 and less than f.NumSettings().
+func (f *SettingsFrame) Setting(i int) Setting {
+	buf := f.p
+	return Setting{
+		ID:  SettingID(binary.BigEndian.Uint16(buf[i*6 : i*6+2])),
+		Val: binary.BigEndian.Uint32(buf[i*6+2 : i*6+6]),
+	}
+}
+
+func (f *SettingsFrame) NumSettings() int { return len(f.p) / 6 }
+
+// HasDuplicates reports whether f contains any duplicate setting IDs.
+func (f *SettingsFrame) HasDuplicates() bool {
+	num := f.NumSettings()
+	if num == 0 {
+		return false
+	}
+	// If it's small enough (the common case), just do the n^2
+	// thing and avoid a map allocation.
+	if num < 10 {
+		for i := 0; i < num; i++ {
+			idi := f.Setting(i).ID
+			for j := i + 1; j < num; j++ {
+				idj := f.Setting(j).ID
+				if idi == idj {
+					return true
+				}
+			}
+		}
+		return false
+	}
+	seen := map[SettingID]bool{}
+	for i := 0; i < num; i++ {
+		id := f.Setting(i).ID
+		if seen[id] {
+			return true
+		}
+		seen[id] = true
+	}
+	return false
+}
+
+// ForeachSetting runs fn for each setting.
+// It stops and returns the first error.
+func (f *SettingsFrame) ForeachSetting(fn func(Setting) error) error {
+	f.checkValid()
+	for i := 0; i < f.NumSettings(); i++ {
+		if err := fn(f.Setting(i)); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// WriteSettings writes a SETTINGS frame with zero or more settings
+// specified and the ACK bit not set.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteSettings(settings ...Setting) error {
+	f.startWrite(FrameSettings, 0, 0)
+	for _, s := range settings {
+		f.writeUint16(uint16(s.ID))
+		f.writeUint32(s.Val)
+	}
+	return f.endWrite()
+}
+
+// WriteSettingsAck writes an empty SETTINGS frame with the ACK bit set.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteSettingsAck() error {
+	f.startWrite(FrameSettings, FlagSettingsAck, 0)
+	return f.endWrite()
+}
+
+// A PingFrame is a mechanism for measuring a minimal round trip time
+// from the sender, as well as determining whether an idle connection
+// is still functional.
+// See http://http2.github.io/http2-spec/#rfc.section.6.7
+type PingFrame struct {
+	FrameHeader
+	Data [8]byte
+}
+
+func (f *PingFrame) IsAck() bool { return f.Flags.Has(FlagPingAck) }
+
+func parsePingFrame(_ *frameCache, fh FrameHeader, payload []byte) (Frame, error) {
+	if len(payload) != 8 {
+		return nil, ConnectionError(ErrCodeFrameSize)
+	}
+	if fh.StreamID != 0 {
+		return nil, ConnectionError(ErrCodeProtocol)
+	}
+	f := &PingFrame{FrameHeader: fh}
+	copy(f.Data[:], payload)
+	return f, nil
+}
+
+func (f *Framer) WritePing(ack bool, data [8]byte) error {
+	var flags Flags
+	if ack {
+		flags = FlagPingAck
+	}
+	f.startWrite(FramePing, flags, 0)
+	f.writeBytes(data[:])
+	return f.endWrite()
+}
+
+// A GoAwayFrame informs the remote peer to stop creating streams on this connection.
+// See http://http2.github.io/http2-spec/#rfc.section.6.8
+type GoAwayFrame struct {
+	FrameHeader
+	LastStreamID uint32
+	ErrCode      ErrCode
+	debugData    []byte
+}
+
+// DebugData returns any debug data in the GOAWAY frame. Its contents
+// are not defined.
+// The caller must not retain the returned memory past the next
+// call to ReadFrame.
+func (f *GoAwayFrame) DebugData() []byte {
+	f.checkValid()
+	return f.debugData
+}
+
+func parseGoAwayFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+	if fh.StreamID != 0 {
+		return nil, ConnectionError(ErrCodeProtocol)
+	}
+	if len(p) < 8 {
+		return nil, ConnectionError(ErrCodeFrameSize)
+	}
+	return &GoAwayFrame{
+		FrameHeader:  fh,
+		LastStreamID: binary.BigEndian.Uint32(p[:4]) & (1<<31 - 1),
+		ErrCode:      ErrCode(binary.BigEndian.Uint32(p[4:8])),
+		debugData:    p[8:],
+	}, nil
+}
+
+func (f *Framer) WriteGoAway(maxStreamID uint32, code ErrCode, debugData []byte) error {
+	f.startWrite(FrameGoAway, 0, 0)
+	f.writeUint32(maxStreamID & (1<<31 - 1))
+	f.writeUint32(uint32(code))
+	f.writeBytes(debugData)
+	return f.endWrite()
+}
+
+// An UnknownFrame is the frame type returned when the frame type is unknown
+// or no specific frame type parser exists.
+type UnknownFrame struct {
+	FrameHeader
+	p []byte
+}
+
+// Payload returns the frame's payload (after the header).  It is not
+// valid to call this method after a subsequent call to
+// Framer.ReadFrame, nor is it valid to retain the returned slice.
+// The memory is owned by the Framer and is invalidated when the next
+// frame is read.
+func (f *UnknownFrame) Payload() []byte {
+	f.checkValid()
+	return f.p
+}
+
+func parseUnknownFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+	return &UnknownFrame{fh, p}, nil
+}
+
+// A WindowUpdateFrame is used to implement flow control.
+// See http://http2.github.io/http2-spec/#rfc.section.6.9
+type WindowUpdateFrame struct {
+	FrameHeader
+	Increment uint32 // never read with high bit set
+}
+
+func parseWindowUpdateFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+	if len(p) != 4 {
+		return nil, ConnectionError(ErrCodeFrameSize)
+	}
+	inc := binary.BigEndian.Uint32(p[:4]) & 0x7fffffff // mask off high reserved bit
+	if inc == 0 {
+		// A receiver MUST treat the receipt of a
+		// WINDOW_UPDATE frame with an flow control window
+		// increment of 0 as a stream error (Section 5.4.2) of
+		// type PROTOCOL_ERROR; errors on the connection flow
+		// control window MUST be treated as a connection
+		// error (Section 5.4.1).
+		if fh.StreamID == 0 {
+			return nil, ConnectionError(ErrCodeProtocol)
+		}
+		return nil, streamError(fh.StreamID, ErrCodeProtocol)
+	}
+	return &WindowUpdateFrame{
+		FrameHeader: fh,
+		Increment:   inc,
+	}, nil
+}
+
+// WriteWindowUpdate writes a WINDOW_UPDATE frame.
+// The increment value must be between 1 and 2,147,483,647, inclusive.
+// If the Stream ID is zero, the window update applies to the
+// connection as a whole.
+func (f *Framer) WriteWindowUpdate(streamID, incr uint32) error {
+	// "The legal range for the increment to the flow control window is 1 to 2^31-1 (2,147,483,647) octets."
+	if (incr < 1 || incr > 2147483647) && !f.AllowIllegalWrites {
+		return errors.New("illegal window increment value")
+	}
+	f.startWrite(FrameWindowUpdate, 0, streamID)
+	f.writeUint32(incr)
+	return f.endWrite()
+}
+
+// A HeadersFrame is used to open a stream and additionally carries a
+// header block fragment.
+type HeadersFrame struct {
+	FrameHeader
+
+	// Priority is set if FlagHeadersPriority is set in the FrameHeader.
+	Priority PriorityParam
+
+	headerFragBuf []byte // not owned
+}
+
+func (f *HeadersFrame) HeaderBlockFragment() []byte {
+	f.checkValid()
+	return f.headerFragBuf
+}
+
+func (f *HeadersFrame) HeadersEnded() bool {
+	return f.FrameHeader.Flags.Has(FlagHeadersEndHeaders)
+}
+
+func (f *HeadersFrame) StreamEnded() bool {
+	return f.FrameHeader.Flags.Has(FlagHeadersEndStream)
+}
+
+func (f *HeadersFrame) HasPriority() bool {
+	return f.FrameHeader.Flags.Has(FlagHeadersPriority)
+}
+
+func parseHeadersFrame(_ *frameCache, fh FrameHeader, p []byte) (_ Frame, err error) {
+	hf := &HeadersFrame{
+		FrameHeader: fh,
+	}
+	if fh.StreamID == 0 {
+		// HEADERS frames MUST be associated with a stream. If a HEADERS frame
+		// is received whose stream identifier field is 0x0, the recipient MUST
+		// respond with a connection error (Section 5.4.1) of type
+		// PROTOCOL_ERROR.
+		return nil, connError{ErrCodeProtocol, "HEADERS frame with stream ID 0"}
+	}
+	var padLength uint8
+	if fh.Flags.Has(FlagHeadersPadded) {
+		if p, padLength, err = readByte(p); err != nil {
+			return
+		}
+	}
+	if fh.Flags.Has(FlagHeadersPriority) {
+		var v uint32
+		p, v, err = readUint32(p)
+		if err != nil {
+			return nil, err
+		}
+		hf.Priority.StreamDep = v & 0x7fffffff
+		hf.Priority.Exclusive = (v != hf.Priority.StreamDep) // high bit was set
+		p, hf.Priority.Weight, err = readByte(p)
+		if err != nil {
+			return nil, err
+		}
+	}
+	if len(p)-int(padLength) <= 0 {
+		return nil, streamError(fh.StreamID, ErrCodeProtocol)
+	}
+	hf.headerFragBuf = p[:len(p)-int(padLength)]
+	return hf, nil
+}
+
+// HeadersFrameParam are the parameters for writing a HEADERS frame.
+type HeadersFrameParam struct {
+	// StreamID is the required Stream ID to initiate.
+	StreamID uint32
+	// BlockFragment is part (or all) of a Header Block.
+	BlockFragment []byte
+
+	// EndStream indicates that the header block is the last that
+	// the endpoint will send for the identified stream. Setting
+	// this flag causes the stream to enter one of "half closed"
+	// states.
+	EndStream bool
+
+	// EndHeaders indicates that this frame contains an entire
+	// header block and is not followed by any
+	// CONTINUATION frames.
+	EndHeaders bool
+
+	// PadLength is the optional number of bytes of zeros to add
+	// to this frame.
+	PadLength uint8
+
+	// Priority, if non-zero, includes stream priority information
+	// in the HEADER frame.
+	Priority PriorityParam
+}
+
+// WriteHeaders writes a single HEADERS frame.
+//
+// This is a low-level header writing method. Encoding headers and
+// splitting them into any necessary CONTINUATION frames is handled
+// elsewhere.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteHeaders(p HeadersFrameParam) error {
+	if !validStreamID(p.StreamID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	var flags Flags
+	if p.PadLength != 0 {
+		flags |= FlagHeadersPadded
+	}
+	if p.EndStream {
+		flags |= FlagHeadersEndStream
+	}
+	if p.EndHeaders {
+		flags |= FlagHeadersEndHeaders
+	}
+	if !p.Priority.IsZero() {
+		flags |= FlagHeadersPriority
+	}
+	f.startWrite(FrameHeaders, flags, p.StreamID)
+	if p.PadLength != 0 {
+		f.writeByte(p.PadLength)
+	}
+	if !p.Priority.IsZero() {
+		v := p.Priority.StreamDep
+		if !validStreamIDOrZero(v) && !f.AllowIllegalWrites {
+			return errDepStreamID
+		}
+		if p.Priority.Exclusive {
+			v |= 1 << 31
+		}
+		f.writeUint32(v)
+		f.writeByte(p.Priority.Weight)
+	}
+	f.wbuf = append(f.wbuf, p.BlockFragment...)
+	f.wbuf = append(f.wbuf, padZeros[:p.PadLength]...)
+	return f.endWrite()
+}
+
+// A PriorityFrame specifies the sender-advised priority of a stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.3
+type PriorityFrame struct {
+	FrameHeader
+	PriorityParam
+}
+
+// PriorityParam are the stream prioritzation parameters.
+type PriorityParam struct {
+	// StreamDep is a 31-bit stream identifier for the
+	// stream that this stream depends on. Zero means no
+	// dependency.
+	StreamDep uint32
+
+	// Exclusive is whether the dependency is exclusive.
+	Exclusive bool
+
+	// Weight is the stream's zero-indexed weight. It should be
+	// set together with StreamDep, or neither should be set. Per
+	// the spec, "Add one to the value to obtain a weight between
+	// 1 and 256."
+	Weight uint8
+}
+
+func (p PriorityParam) IsZero() bool {
+	return p == PriorityParam{}
+}
+
+func parsePriorityFrame(_ *frameCache, fh FrameHeader, payload []byte) (Frame, error) {
+	if fh.StreamID == 0 {
+		return nil, connError{ErrCodeProtocol, "PRIORITY frame with stream ID 0"}
+	}
+	if len(payload) != 5 {
+		return nil, connError{ErrCodeFrameSize, fmt.Sprintf("PRIORITY frame payload size was %d; want 5", len(payload))}
+	}
+	v := binary.BigEndian.Uint32(payload[:4])
+	streamID := v & 0x7fffffff // mask off high bit
+	return &PriorityFrame{
+		FrameHeader: fh,
+		PriorityParam: PriorityParam{
+			Weight:    payload[4],
+			StreamDep: streamID,
+			Exclusive: streamID != v, // was high bit set?
+		},
+	}, nil
+}
+
+// WritePriority writes a PRIORITY frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WritePriority(streamID uint32, p PriorityParam) error {
+	if !validStreamID(streamID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	if !validStreamIDOrZero(p.StreamDep) {
+		return errDepStreamID
+	}
+	f.startWrite(FramePriority, 0, streamID)
+	v := p.StreamDep
+	if p.Exclusive {
+		v |= 1 << 31
+	}
+	f.writeUint32(v)
+	f.writeByte(p.Weight)
+	return f.endWrite()
+}
+
+// A RSTStreamFrame allows for abnormal termination of a stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.4
+type RSTStreamFrame struct {
+	FrameHeader
+	ErrCode ErrCode
+}
+
+func parseRSTStreamFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+	if len(p) != 4 {
+		return nil, ConnectionError(ErrCodeFrameSize)
+	}
+	if fh.StreamID == 0 {
+		return nil, ConnectionError(ErrCodeProtocol)
+	}
+	return &RSTStreamFrame{fh, ErrCode(binary.BigEndian.Uint32(p[:4]))}, nil
+}
+
+// WriteRSTStream writes a RST_STREAM frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteRSTStream(streamID uint32, code ErrCode) error {
+	if !validStreamID(streamID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	f.startWrite(FrameRSTStream, 0, streamID)
+	f.writeUint32(uint32(code))
+	return f.endWrite()
+}
+
+// A ContinuationFrame is used to continue a sequence of header block fragments.
+// See http://http2.github.io/http2-spec/#rfc.section.6.10
+type ContinuationFrame struct {
+	FrameHeader
+	headerFragBuf []byte
+}
+
+func parseContinuationFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+	if fh.StreamID == 0 {
+		return nil, connError{ErrCodeProtocol, "CONTINUATION frame with stream ID 0"}
+	}
+	return &ContinuationFrame{fh, p}, nil
+}
+
+func (f *ContinuationFrame) HeaderBlockFragment() []byte {
+	f.checkValid()
+	return f.headerFragBuf
+}
+
+func (f *ContinuationFrame) HeadersEnded() bool {
+	return f.FrameHeader.Flags.Has(FlagContinuationEndHeaders)
+}
+
+// WriteContinuation writes a CONTINUATION frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteContinuation(streamID uint32, endHeaders bool, headerBlockFragment []byte) error {
+	if !validStreamID(streamID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	var flags Flags
+	if endHeaders {
+		flags |= FlagContinuationEndHeaders
+	}
+	f.startWrite(FrameContinuation, flags, streamID)
+	f.wbuf = append(f.wbuf, headerBlockFragment...)
+	return f.endWrite()
+}
+
+// A PushPromiseFrame is used to initiate a server stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.6
+type PushPromiseFrame struct {
+	FrameHeader
+	PromiseID     uint32
+	headerFragBuf []byte // not owned
+}
+
+func (f *PushPromiseFrame) HeaderBlockFragment() []byte {
+	f.checkValid()
+	return f.headerFragBuf
+}
+
+func (f *PushPromiseFrame) HeadersEnded() bool {
+	return f.FrameHeader.Flags.Has(FlagPushPromiseEndHeaders)
+}
+
+func parsePushPromise(_ *frameCache, fh FrameHeader, p []byte) (_ Frame, err error) {
+	pp := &PushPromiseFrame{
+		FrameHeader: fh,
+	}
+	if pp.StreamID == 0 {
+		// PUSH_PROMISE frames MUST be associated with an existing,
+		// peer-initiated stream. The stream identifier of a
+		// PUSH_PROMISE frame indicates the stream it is associated
+		// with. If the stream identifier field specifies the value
+		// 0x0, a recipient MUST respond with a connection error
+		// (Section 5.4.1) of type PROTOCOL_ERROR.
+		return nil, ConnectionError(ErrCodeProtocol)
+	}
+	// The PUSH_PROMISE frame includes optional padding.
+	// Padding fields and flags are identical to those defined for DATA frames
+	var padLength uint8
+	if fh.Flags.Has(FlagPushPromisePadded) {
+		if p, padLength, err = readByte(p); err != nil {
+			return
+		}
+	}
+
+	p, pp.PromiseID, err = readUint32(p)
+	if err != nil {
+		return
+	}
+	pp.PromiseID = pp.PromiseID & (1<<31 - 1)
+
+	if int(padLength) > len(p) {
+		// like the DATA frame, error out if padding is longer than the body.
+		return nil, ConnectionError(ErrCodeProtocol)
+	}
+	pp.headerFragBuf = p[:len(p)-int(padLength)]
+	return pp, nil
+}
+
+// PushPromiseParam are the parameters for writing a PUSH_PROMISE frame.
+type PushPromiseParam struct {
+	// StreamID is the required Stream ID to initiate.
+	StreamID uint32
+
+	// PromiseID is the required Stream ID which this
+	// Push Promises
+	PromiseID uint32
+
+	// BlockFragment is part (or all) of a Header Block.
+	BlockFragment []byte
+
+	// EndHeaders indicates that this frame contains an entire
+	// header block and is not followed by any
+	// CONTINUATION frames.
+	EndHeaders bool
+
+	// PadLength is the optional number of bytes of zeros to add
+	// to this frame.
+	PadLength uint8
+}
+
+// WritePushPromise writes a single PushPromise Frame.
+//
+// As with Header Frames, This is the low level call for writing
+// individual frames. Continuation frames are handled elsewhere.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WritePushPromise(p PushPromiseParam) error {
+	if !validStreamID(p.StreamID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	var flags Flags
+	if p.PadLength != 0 {
+		flags |= FlagPushPromisePadded
+	}
+	if p.EndHeaders {
+		flags |= FlagPushPromiseEndHeaders
+	}
+	f.startWrite(FramePushPromise, flags, p.StreamID)
+	if p.PadLength != 0 {
+		f.writeByte(p.PadLength)
+	}
+	if !validStreamID(p.PromiseID) && !f.AllowIllegalWrites {
+		return errStreamID
+	}
+	f.writeUint32(p.PromiseID)
+	f.wbuf = append(f.wbuf, p.BlockFragment...)
+	f.wbuf = append(f.wbuf, padZeros[:p.PadLength]...)
+	return f.endWrite()
+}
+
+// WriteRawFrame writes a raw frame. This can be used to write
+// extension frames unknown to this package.
+func (f *Framer) WriteRawFrame(t FrameType, flags Flags, streamID uint32, payload []byte) error {
+	f.startWrite(t, flags, streamID)
+	f.writeBytes(payload)
+	return f.endWrite()
+}
+
+func readByte(p []byte) (remain []byte, b byte, err error) {
+	if len(p) == 0 {
+		return nil, 0, io.ErrUnexpectedEOF
+	}
+	return p[1:], p[0], nil
+}
+
+func readUint32(p []byte) (remain []byte, v uint32, err error) {
+	if len(p) < 4 {
+		return nil, 0, io.ErrUnexpectedEOF
+	}
+	return p[4:], binary.BigEndian.Uint32(p[:4]), nil
+}
+
+type streamEnder interface {
+	StreamEnded() bool
+}
+
+type headersEnder interface {
+	HeadersEnded() bool
+}
+
+type headersOrContinuation interface {
+	headersEnder
+	HeaderBlockFragment() []byte
+}
+
+// A MetaHeadersFrame is the representation of one HEADERS frame and
+// zero or more contiguous CONTINUATION frames and the decoding of
+// their HPACK-encoded contents.
+//
+// This type of frame does not appear on the wire and is only returned
+// by the Framer when Framer.ReadMetaHeaders is set.
+type MetaHeadersFrame struct {
+	*HeadersFrame
+
+	// Fields are the fields contained in the HEADERS and
+	// CONTINUATION frames. The underlying slice is owned by the
+	// Framer and must not be retained after the next call to
+	// ReadFrame.
+	//
+	// Fields are guaranteed to be in the correct http2 order and
+	// not have unknown pseudo header fields or invalid header
+	// field names or values. Required pseudo header fields may be
+	// missing, however. Use the MetaHeadersFrame.Pseudo accessor
+	// method access pseudo headers.
+	Fields []hpack.HeaderField
+
+	// Truncated is whether the max header list size limit was hit
+	// and Fields is incomplete. The hpack decoder state is still
+	// valid, however.
+	Truncated bool
+}
+
+// PseudoValue returns the given pseudo header field's value.
+// The provided pseudo field should not contain the leading colon.
+func (mh *MetaHeadersFrame) PseudoValue(pseudo string) string {
+	for _, hf := range mh.Fields {
+		if !hf.IsPseudo() {
+			return ""
+		}
+		if hf.Name[1:] == pseudo {
+			return hf.Value
+		}
+	}
+	return ""
+}
+
+// RegularFields returns the regular (non-pseudo) header fields of mh.
+// The caller does not own the returned slice.
+func (mh *MetaHeadersFrame) RegularFields() []hpack.HeaderField {
+	for i, hf := range mh.Fields {
+		if !hf.IsPseudo() {
+			return mh.Fields[i:]
+		}
+	}
+	return nil
+}
+
+// PseudoFields returns the pseudo header fields of mh.
+// The caller does not own the returned slice.
+func (mh *MetaHeadersFrame) PseudoFields() []hpack.HeaderField {
+	for i, hf := range mh.Fields {
+		if !hf.IsPseudo() {
+			return mh.Fields[:i]
+		}
+	}
+	return mh.Fields
+}
+
+func (mh *MetaHeadersFrame) checkPseudos() error {
+	var isRequest, isResponse bool
+	pf := mh.PseudoFields()
+	for i, hf := range pf {
+		switch hf.Name {
+		case ":method", ":path", ":scheme", ":authority":
+			isRequest = true
+		case ":status":
+			isResponse = true
+		default:
+			return pseudoHeaderError(hf.Name)
+		}
+		// Check for duplicates.
+		// This would be a bad algorithm, but N is 4.
+		// And this doesn't allocate.
+		for _, hf2 := range pf[:i] {
+			if hf.Name == hf2.Name {
+				return duplicatePseudoHeaderError(hf.Name)
+			}
+		}
+	}
+	if isRequest && isResponse {
+		return errMixPseudoHeaderTypes
+	}
+	return nil
+}
+
+func (fr *Framer) maxHeaderStringLen() int {
+	v := fr.maxHeaderListSize()
+	if uint32(int(v)) == v {
+		return int(v)
+	}
+	// They had a crazy big number for MaxHeaderBytes anyway,
+	// so give them unlimited header lengths:
+	return 0
+}
+
+// readMetaFrame returns 0 or more CONTINUATION frames from fr and
+// merge them into the provided hf and returns a MetaHeadersFrame
+// with the decoded hpack values.
+func (fr *Framer) readMetaFrame(hf *HeadersFrame) (*MetaHeadersFrame, error) {
+	if fr.AllowIllegalReads {
+		return nil, errors.New("illegal use of AllowIllegalReads with ReadMetaHeaders")
+	}
+	mh := &MetaHeadersFrame{
+		HeadersFrame: hf,
+	}
+	var remainSize = fr.maxHeaderListSize()
+	var sawRegular bool
+
+	var invalid error // pseudo header field errors
+	hdec := fr.ReadMetaHeaders
+	hdec.SetEmitEnabled(true)
+	hdec.SetMaxStringLength(fr.maxHeaderStringLen())
+	hdec.SetEmitFunc(func(hf hpack.HeaderField) {
+		if VerboseLogs && fr.logReads {
+			fr.debugReadLoggerf("http2: decoded hpack field %+v", hf)
+		}
+		if !httpguts.ValidHeaderFieldValue(hf.Value) {
+			invalid = headerFieldValueError(hf.Value)
+		}
+		isPseudo := strings.HasPrefix(hf.Name, ":")
+		if isPseudo {
+			if sawRegular {
+				invalid = errPseudoAfterRegular
+			}
+		} else {
+			sawRegular = true
+			if !validWireHeaderFieldName(hf.Name) {
+				invalid = headerFieldNameError(hf.Name)
+			}
+		}
+
+		if invalid != nil {
+			hdec.SetEmitEnabled(false)
+			return
+		}
+
+		size := hf.Size()
+		if size > remainSize {
+			hdec.SetEmitEnabled(false)
+			mh.Truncated = true
+			return
+		}
+		remainSize -= size
+
+		mh.Fields = append(mh.Fields, hf)
+	})
+	// Lose reference to MetaHeadersFrame:
+	defer hdec.SetEmitFunc(func(hf hpack.HeaderField) {})
+
+	var hc headersOrContinuation = hf
+	for {
+		frag := hc.HeaderBlockFragment()
+		if _, err := hdec.Write(frag); err != nil {
+			return nil, ConnectionError(ErrCodeCompression)
+		}
+
+		if hc.HeadersEnded() {
+			break
+		}
+		if f, err := fr.ReadFrame(); err != nil {
+			return nil, err
+		} else {
+			hc = f.(*ContinuationFrame) // guaranteed by checkFrameOrder
+		}
+	}
+
+	mh.HeadersFrame.headerFragBuf = nil
+	mh.HeadersFrame.invalidate()
+
+	if err := hdec.Close(); err != nil {
+		return nil, ConnectionError(ErrCodeCompression)
+	}
+	if invalid != nil {
+		fr.errDetail = invalid
+		if VerboseLogs {
+			log.Printf("http2: invalid header: %v", invalid)
+		}
+		return nil, StreamError{mh.StreamID, ErrCodeProtocol, invalid}
+	}
+	if err := mh.checkPseudos(); err != nil {
+		fr.errDetail = err
+		if VerboseLogs {
+			log.Printf("http2: invalid pseudo headers: %v", err)
+		}
+		return nil, StreamError{mh.StreamID, ErrCodeProtocol, err}
+	}
+	return mh, nil
+}
+
+func summarizeFrame(f Frame) string {
+	var buf bytes.Buffer
+	f.Header().writeDebug(&buf)
+	switch f := f.(type) {
+	case *SettingsFrame:
+		n := 0
+		f.ForeachSetting(func(s Setting) error {
+			n++
+			if n == 1 {
+				buf.WriteString(", settings:")
+			}
+			fmt.Fprintf(&buf, " %v=%v,", s.ID, s.Val)
+			return nil
+		})
+		if n > 0 {
+			buf.Truncate(buf.Len() - 1) // remove trailing comma
+		}
+	case *DataFrame:
+		data := f.Data()
+		const max = 256
+		if len(data) > max {
+			data = data[:max]
+		}
+		fmt.Fprintf(&buf, " data=%q", data)
+		if len(f.Data()) > max {
+			fmt.Fprintf(&buf, " (%d bytes omitted)", len(f.Data())-max)
+		}
+	case *WindowUpdateFrame:
+		if f.StreamID == 0 {
+			buf.WriteString(" (conn)")
+		}
+		fmt.Fprintf(&buf, " incr=%v", f.Increment)
+	case *PingFrame:
+		fmt.Fprintf(&buf, " ping=%q", f.Data[:])
+	case *GoAwayFrame:
+		fmt.Fprintf(&buf, " LastStreamID=%v ErrCode=%v Debug=%q",
+			f.LastStreamID, f.ErrCode, f.debugData)
+	case *RSTStreamFrame:
+		fmt.Fprintf(&buf, " ErrCode=%v", f.ErrCode)
+	}
+	return buf.String()
+}
diff --git a/vendor/golang.org/x/net/http2/go111.go b/vendor/golang.org/x/net/http2/go111.go
new file mode 100644
index 0000000..3a13101
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/go111.go
@@ -0,0 +1,29 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build go1.11
+
+package http2
+
+import (
+	"net/http/httptrace"
+	"net/textproto"
+)
+
+func traceHasWroteHeaderField(trace *httptrace.ClientTrace) bool {
+	return trace != nil && trace.WroteHeaderField != nil
+}
+
+func traceWroteHeaderField(trace *httptrace.ClientTrace, k, v string) {
+	if trace != nil && trace.WroteHeaderField != nil {
+		trace.WroteHeaderField(k, []string{v})
+	}
+}
+
+func traceGot1xxResponseFunc(trace *httptrace.ClientTrace) func(int, textproto.MIMEHeader) error {
+	if trace != nil {
+		return trace.Got1xxResponse
+	}
+	return nil
+}
diff --git a/vendor/golang.org/x/net/http2/gotrack.go b/vendor/golang.org/x/net/http2/gotrack.go
new file mode 100644
index 0000000..9933c9f
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/gotrack.go
@@ -0,0 +1,170 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Defensive debug-only utility to track that functions run on the
+// goroutine that they're supposed to.
+
+package http2
+
+import (
+	"bytes"
+	"errors"
+	"fmt"
+	"os"
+	"runtime"
+	"strconv"
+	"sync"
+)
+
+var DebugGoroutines = os.Getenv("DEBUG_HTTP2_GOROUTINES") == "1"
+
+type goroutineLock uint64
+
+func newGoroutineLock() goroutineLock {
+	if !DebugGoroutines {
+		return 0
+	}
+	return goroutineLock(curGoroutineID())
+}
+
+func (g goroutineLock) check() {
+	if !DebugGoroutines {
+		return
+	}
+	if curGoroutineID() != uint64(g) {
+		panic("running on the wrong goroutine")
+	}
+}
+
+func (g goroutineLock) checkNotOn() {
+	if !DebugGoroutines {
+		return
+	}
+	if curGoroutineID() == uint64(g) {
+		panic("running on the wrong goroutine")
+	}
+}
+
+var goroutineSpace = []byte("goroutine ")
+
+func curGoroutineID() uint64 {
+	bp := littleBuf.Get().(*[]byte)
+	defer littleBuf.Put(bp)
+	b := *bp
+	b = b[:runtime.Stack(b, false)]
+	// Parse the 4707 out of "goroutine 4707 ["
+	b = bytes.TrimPrefix(b, goroutineSpace)
+	i := bytes.IndexByte(b, ' ')
+	if i < 0 {
+		panic(fmt.Sprintf("No space found in %q", b))
+	}
+	b = b[:i]
+	n, err := parseUintBytes(b, 10, 64)
+	if err != nil {
+		panic(fmt.Sprintf("Failed to parse goroutine ID out of %q: %v", b, err))
+	}
+	return n
+}
+
+var littleBuf = sync.Pool{
+	New: func() interface{} {
+		buf := make([]byte, 64)
+		return &buf
+	},
+}
+
+// parseUintBytes is like strconv.ParseUint, but using a []byte.
+func parseUintBytes(s []byte, base int, bitSize int) (n uint64, err error) {
+	var cutoff, maxVal uint64
+
+	if bitSize == 0 {
+		bitSize = int(strconv.IntSize)
+	}
+
+	s0 := s
+	switch {
+	case len(s) < 1:
+		err = strconv.ErrSyntax
+		goto Error
+
+	case 2 <= base && base <= 36:
+		// valid base; nothing to do
+
+	case base == 0:
+		// Look for octal, hex prefix.
+		switch {
+		case s[0] == '0' && len(s) > 1 && (s[1] == 'x' || s[1] == 'X'):
+			base = 16
+			s = s[2:]
+			if len(s) < 1 {
+				err = strconv.ErrSyntax
+				goto Error
+			}
+		case s[0] == '0':
+			base = 8
+		default:
+			base = 10
+		}
+
+	default:
+		err = errors.New("invalid base " + strconv.Itoa(base))
+		goto Error
+	}
+
+	n = 0
+	cutoff = cutoff64(base)
+	maxVal = 1<<uint(bitSize) - 1
+
+	for i := 0; i < len(s); i++ {
+		var v byte
+		d := s[i]
+		switch {
+		case '0' <= d && d <= '9':
+			v = d - '0'
+		case 'a' <= d && d <= 'z':
+			v = d - 'a' + 10
+		case 'A' <= d && d <= 'Z':
+			v = d - 'A' + 10
+		default:
+			n = 0
+			err = strconv.ErrSyntax
+			goto Error
+		}
+		if int(v) >= base {
+			n = 0
+			err = strconv.ErrSyntax
+			goto Error
+		}
+
+		if n >= cutoff {
+			// n*base overflows
+			n = 1<<64 - 1
+			err = strconv.ErrRange
+			goto Error
+		}
+		n *= uint64(base)
+
+		n1 := n + uint64(v)
+		if n1 < n || n1 > maxVal {
+			// n+v overflows
+			n = 1<<64 - 1
+			err = strconv.ErrRange
+			goto Error
+		}
+		n = n1
+	}
+
+	return n, nil
+
+Error:
+	return n, &strconv.NumError{Func: "ParseUint", Num: string(s0), Err: err}
+}
+
+// Return the first number n such that n*base >= 1<<64.
+func cutoff64(base int) uint64 {
+	if base < 2 {
+		return 0
+	}
+	return (1<<64-1)/uint64(base) + 1
+}
diff --git a/vendor/golang.org/x/net/http2/headermap.go b/vendor/golang.org/x/net/http2/headermap.go
new file mode 100644
index 0000000..c3ff3fa
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/headermap.go
@@ -0,0 +1,88 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"net/http"
+	"strings"
+	"sync"
+)
+
+var (
+	commonBuildOnce   sync.Once
+	commonLowerHeader map[string]string // Go-Canonical-Case -> lower-case
+	commonCanonHeader map[string]string // lower-case -> Go-Canonical-Case
+)
+
+func buildCommonHeaderMapsOnce() {
+	commonBuildOnce.Do(buildCommonHeaderMaps)
+}
+
+func buildCommonHeaderMaps() {
+	common := []string{
+		"accept",
+		"accept-charset",
+		"accept-encoding",
+		"accept-language",
+		"accept-ranges",
+		"age",
+		"access-control-allow-origin",
+		"allow",
+		"authorization",
+		"cache-control",
+		"content-disposition",
+		"content-encoding",
+		"content-language",
+		"content-length",
+		"content-location",
+		"content-range",
+		"content-type",
+		"cookie",
+		"date",
+		"etag",
+		"expect",
+		"expires",
+		"from",
+		"host",
+		"if-match",
+		"if-modified-since",
+		"if-none-match",
+		"if-unmodified-since",
+		"last-modified",
+		"link",
+		"location",
+		"max-forwards",
+		"proxy-authenticate",
+		"proxy-authorization",
+		"range",
+		"referer",
+		"refresh",
+		"retry-after",
+		"server",
+		"set-cookie",
+		"strict-transport-security",
+		"trailer",
+		"transfer-encoding",
+		"user-agent",
+		"vary",
+		"via",
+		"www-authenticate",
+	}
+	commonLowerHeader = make(map[string]string, len(common))
+	commonCanonHeader = make(map[string]string, len(common))
+	for _, v := range common {
+		chk := http.CanonicalHeaderKey(v)
+		commonLowerHeader[chk] = v
+		commonCanonHeader[v] = chk
+	}
+}
+
+func lowerHeader(v string) string {
+	buildCommonHeaderMapsOnce()
+	if s, ok := commonLowerHeader[v]; ok {
+		return s
+	}
+	return strings.ToLower(v)
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/encode.go b/vendor/golang.org/x/net/http2/hpack/encode.go
new file mode 100644
index 0000000..97f1783
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/encode.go
@@ -0,0 +1,240 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+	"io"
+)
+
+const (
+	uint32Max              = ^uint32(0)
+	initialHeaderTableSize = 4096
+)
+
+type Encoder struct {
+	dynTab dynamicTable
+	// minSize is the minimum table size set by
+	// SetMaxDynamicTableSize after the previous Header Table Size
+	// Update.
+	minSize uint32
+	// maxSizeLimit is the maximum table size this encoder
+	// supports. This will protect the encoder from too large
+	// size.
+	maxSizeLimit uint32
+	// tableSizeUpdate indicates whether "Header Table Size
+	// Update" is required.
+	tableSizeUpdate bool
+	w               io.Writer
+	buf             []byte
+}
+
+// NewEncoder returns a new Encoder which performs HPACK encoding. An
+// encoded data is written to w.
+func NewEncoder(w io.Writer) *Encoder {
+	e := &Encoder{
+		minSize:         uint32Max,
+		maxSizeLimit:    initialHeaderTableSize,
+		tableSizeUpdate: false,
+		w:               w,
+	}
+	e.dynTab.table.init()
+	e.dynTab.setMaxSize(initialHeaderTableSize)
+	return e
+}
+
+// WriteField encodes f into a single Write to e's underlying Writer.
+// This function may also produce bytes for "Header Table Size Update"
+// if necessary. If produced, it is done before encoding f.
+func (e *Encoder) WriteField(f HeaderField) error {
+	e.buf = e.buf[:0]
+
+	if e.tableSizeUpdate {
+		e.tableSizeUpdate = false
+		if e.minSize < e.dynTab.maxSize {
+			e.buf = appendTableSize(e.buf, e.minSize)
+		}
+		e.minSize = uint32Max
+		e.buf = appendTableSize(e.buf, e.dynTab.maxSize)
+	}
+
+	idx, nameValueMatch := e.searchTable(f)
+	if nameValueMatch {
+		e.buf = appendIndexed(e.buf, idx)
+	} else {
+		indexing := e.shouldIndex(f)
+		if indexing {
+			e.dynTab.add(f)
+		}
+
+		if idx == 0 {
+			e.buf = appendNewName(e.buf, f, indexing)
+		} else {
+			e.buf = appendIndexedName(e.buf, f, idx, indexing)
+		}
+	}
+	n, err := e.w.Write(e.buf)
+	if err == nil && n != len(e.buf) {
+		err = io.ErrShortWrite
+	}
+	return err
+}
+
+// searchTable searches f in both stable and dynamic header tables.
+// The static header table is searched first. Only when there is no
+// exact match for both name and value, the dynamic header table is
+// then searched. If there is no match, i is 0. If both name and value
+// match, i is the matched index and nameValueMatch becomes true. If
+// only name matches, i points to that index and nameValueMatch
+// becomes false.
+func (e *Encoder) searchTable(f HeaderField) (i uint64, nameValueMatch bool) {
+	i, nameValueMatch = staticTable.search(f)
+	if nameValueMatch {
+		return i, true
+	}
+
+	j, nameValueMatch := e.dynTab.table.search(f)
+	if nameValueMatch || (i == 0 && j != 0) {
+		return j + uint64(staticTable.len()), nameValueMatch
+	}
+
+	return i, false
+}
+
+// SetMaxDynamicTableSize changes the dynamic header table size to v.
+// The actual size is bounded by the value passed to
+// SetMaxDynamicTableSizeLimit.
+func (e *Encoder) SetMaxDynamicTableSize(v uint32) {
+	if v > e.maxSizeLimit {
+		v = e.maxSizeLimit
+	}
+	if v < e.minSize {
+		e.minSize = v
+	}
+	e.tableSizeUpdate = true
+	e.dynTab.setMaxSize(v)
+}
+
+// SetMaxDynamicTableSizeLimit changes the maximum value that can be
+// specified in SetMaxDynamicTableSize to v. By default, it is set to
+// 4096, which is the same size of the default dynamic header table
+// size described in HPACK specification. If the current maximum
+// dynamic header table size is strictly greater than v, "Header Table
+// Size Update" will be done in the next WriteField call and the
+// maximum dynamic header table size is truncated to v.
+func (e *Encoder) SetMaxDynamicTableSizeLimit(v uint32) {
+	e.maxSizeLimit = v
+	if e.dynTab.maxSize > v {
+		e.tableSizeUpdate = true
+		e.dynTab.setMaxSize(v)
+	}
+}
+
+// shouldIndex reports whether f should be indexed.
+func (e *Encoder) shouldIndex(f HeaderField) bool {
+	return !f.Sensitive && f.Size() <= e.dynTab.maxSize
+}
+
+// appendIndexed appends index i, as encoded in "Indexed Header Field"
+// representation, to dst and returns the extended buffer.
+func appendIndexed(dst []byte, i uint64) []byte {
+	first := len(dst)
+	dst = appendVarInt(dst, 7, i)
+	dst[first] |= 0x80
+	return dst
+}
+
+// appendNewName appends f, as encoded in one of "Literal Header field
+// - New Name" representation variants, to dst and returns the
+// extended buffer.
+//
+// If f.Sensitive is true, "Never Indexed" representation is used. If
+// f.Sensitive is false and indexing is true, "Incremental Indexing"
+// representation is used.
+func appendNewName(dst []byte, f HeaderField, indexing bool) []byte {
+	dst = append(dst, encodeTypeByte(indexing, f.Sensitive))
+	dst = appendHpackString(dst, f.Name)
+	return appendHpackString(dst, f.Value)
+}
+
+// appendIndexedName appends f and index i referring indexed name
+// entry, as encoded in one of "Literal Header field - Indexed Name"
+// representation variants, to dst and returns the extended buffer.
+//
+// If f.Sensitive is true, "Never Indexed" representation is used. If
+// f.Sensitive is false and indexing is true, "Incremental Indexing"
+// representation is used.
+func appendIndexedName(dst []byte, f HeaderField, i uint64, indexing bool) []byte {
+	first := len(dst)
+	var n byte
+	if indexing {
+		n = 6
+	} else {
+		n = 4
+	}
+	dst = appendVarInt(dst, n, i)
+	dst[first] |= encodeTypeByte(indexing, f.Sensitive)
+	return appendHpackString(dst, f.Value)
+}
+
+// appendTableSize appends v, as encoded in "Header Table Size Update"
+// representation, to dst and returns the extended buffer.
+func appendTableSize(dst []byte, v uint32) []byte {
+	first := len(dst)
+	dst = appendVarInt(dst, 5, uint64(v))
+	dst[first] |= 0x20
+	return dst
+}
+
+// appendVarInt appends i, as encoded in variable integer form using n
+// bit prefix, to dst and returns the extended buffer.
+//
+// See
+// http://http2.github.io/http2-spec/compression.html#integer.representation
+func appendVarInt(dst []byte, n byte, i uint64) []byte {
+	k := uint64((1 << n) - 1)
+	if i < k {
+		return append(dst, byte(i))
+	}
+	dst = append(dst, byte(k))
+	i -= k
+	for ; i >= 128; i >>= 7 {
+		dst = append(dst, byte(0x80|(i&0x7f)))
+	}
+	return append(dst, byte(i))
+}
+
+// appendHpackString appends s, as encoded in "String Literal"
+// representation, to dst and returns the extended buffer.
+//
+// s will be encoded in Huffman codes only when it produces strictly
+// shorter byte string.
+func appendHpackString(dst []byte, s string) []byte {
+	huffmanLength := HuffmanEncodeLength(s)
+	if huffmanLength < uint64(len(s)) {
+		first := len(dst)
+		dst = appendVarInt(dst, 7, huffmanLength)
+		dst = AppendHuffmanString(dst, s)
+		dst[first] |= 0x80
+	} else {
+		dst = appendVarInt(dst, 7, uint64(len(s)))
+		dst = append(dst, s...)
+	}
+	return dst
+}
+
+// encodeTypeByte returns type byte. If sensitive is true, type byte
+// for "Never Indexed" representation is returned. If sensitive is
+// false and indexing is true, type byte for "Incremental Indexing"
+// representation is returned. Otherwise, type byte for "Without
+// Indexing" is returned.
+func encodeTypeByte(indexing, sensitive bool) byte {
+	if sensitive {
+		return 0x10
+	}
+	if indexing {
+		return 0x40
+	}
+	return 0
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/hpack.go b/vendor/golang.org/x/net/http2/hpack/hpack.go
new file mode 100644
index 0000000..85f18a2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/hpack.go
@@ -0,0 +1,504 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package hpack implements HPACK, a compression format for
+// efficiently representing HTTP header fields in the context of HTTP/2.
+//
+// See http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-09
+package hpack
+
+import (
+	"bytes"
+	"errors"
+	"fmt"
+)
+
+// A DecodingError is something the spec defines as a decoding error.
+type DecodingError struct {
+	Err error
+}
+
+func (de DecodingError) Error() string {
+	return fmt.Sprintf("decoding error: %v", de.Err)
+}
+
+// An InvalidIndexError is returned when an encoder references a table
+// entry before the static table or after the end of the dynamic table.
+type InvalidIndexError int
+
+func (e InvalidIndexError) Error() string {
+	return fmt.Sprintf("invalid indexed representation index %d", int(e))
+}
+
+// A HeaderField is a name-value pair. Both the name and value are
+// treated as opaque sequences of octets.
+type HeaderField struct {
+	Name, Value string
+
+	// Sensitive means that this header field should never be
+	// indexed.
+	Sensitive bool
+}
+
+// IsPseudo reports whether the header field is an http2 pseudo header.
+// That is, it reports whether it starts with a colon.
+// It is not otherwise guaranteed to be a valid pseudo header field,
+// though.
+func (hf HeaderField) IsPseudo() bool {
+	return len(hf.Name) != 0 && hf.Name[0] == ':'
+}
+
+func (hf HeaderField) String() string {
+	var suffix string
+	if hf.Sensitive {
+		suffix = " (sensitive)"
+	}
+	return fmt.Sprintf("header field %q = %q%s", hf.Name, hf.Value, suffix)
+}
+
+// Size returns the size of an entry per RFC 7541 section 4.1.
+func (hf HeaderField) Size() uint32 {
+	// http://http2.github.io/http2-spec/compression.html#rfc.section.4.1
+	// "The size of the dynamic table is the sum of the size of
+	// its entries. The size of an entry is the sum of its name's
+	// length in octets (as defined in Section 5.2), its value's
+	// length in octets (see Section 5.2), plus 32.  The size of
+	// an entry is calculated using the length of the name and
+	// value without any Huffman encoding applied."
+
+	// This can overflow if somebody makes a large HeaderField
+	// Name and/or Value by hand, but we don't care, because that
+	// won't happen on the wire because the encoding doesn't allow
+	// it.
+	return uint32(len(hf.Name) + len(hf.Value) + 32)
+}
+
+// A Decoder is the decoding context for incremental processing of
+// header blocks.
+type Decoder struct {
+	dynTab dynamicTable
+	emit   func(f HeaderField)
+
+	emitEnabled bool // whether calls to emit are enabled
+	maxStrLen   int  // 0 means unlimited
+
+	// buf is the unparsed buffer. It's only written to
+	// saveBuf if it was truncated in the middle of a header
+	// block. Because it's usually not owned, we can only
+	// process it under Write.
+	buf []byte // not owned; only valid during Write
+
+	// saveBuf is previous data passed to Write which we weren't able
+	// to fully parse before. Unlike buf, we own this data.
+	saveBuf bytes.Buffer
+
+	firstField bool // processing the first field of the header block
+}
+
+// NewDecoder returns a new decoder with the provided maximum dynamic
+// table size. The emitFunc will be called for each valid field
+// parsed, in the same goroutine as calls to Write, before Write returns.
+func NewDecoder(maxDynamicTableSize uint32, emitFunc func(f HeaderField)) *Decoder {
+	d := &Decoder{
+		emit:        emitFunc,
+		emitEnabled: true,
+		firstField:  true,
+	}
+	d.dynTab.table.init()
+	d.dynTab.allowedMaxSize = maxDynamicTableSize
+	d.dynTab.setMaxSize(maxDynamicTableSize)
+	return d
+}
+
+// ErrStringLength is returned by Decoder.Write when the max string length
+// (as configured by Decoder.SetMaxStringLength) would be violated.
+var ErrStringLength = errors.New("hpack: string too long")
+
+// SetMaxStringLength sets the maximum size of a HeaderField name or
+// value string. If a string exceeds this length (even after any
+// decompression), Write will return ErrStringLength.
+// A value of 0 means unlimited and is the default from NewDecoder.
+func (d *Decoder) SetMaxStringLength(n int) {
+	d.maxStrLen = n
+}
+
+// SetEmitFunc changes the callback used when new header fields
+// are decoded.
+// It must be non-nil. It does not affect EmitEnabled.
+func (d *Decoder) SetEmitFunc(emitFunc func(f HeaderField)) {
+	d.emit = emitFunc
+}
+
+// SetEmitEnabled controls whether the emitFunc provided to NewDecoder
+// should be called. The default is true.
+//
+// This facility exists to let servers enforce MAX_HEADER_LIST_SIZE
+// while still decoding and keeping in-sync with decoder state, but
+// without doing unnecessary decompression or generating unnecessary
+// garbage for header fields past the limit.
+func (d *Decoder) SetEmitEnabled(v bool) { d.emitEnabled = v }
+
+// EmitEnabled reports whether calls to the emitFunc provided to NewDecoder
+// are currently enabled. The default is true.
+func (d *Decoder) EmitEnabled() bool { return d.emitEnabled }
+
+// TODO: add method *Decoder.Reset(maxSize, emitFunc) to let callers re-use Decoders and their
+// underlying buffers for garbage reasons.
+
+func (d *Decoder) SetMaxDynamicTableSize(v uint32) {
+	d.dynTab.setMaxSize(v)
+}
+
+// SetAllowedMaxDynamicTableSize sets the upper bound that the encoded
+// stream (via dynamic table size updates) may set the maximum size
+// to.
+func (d *Decoder) SetAllowedMaxDynamicTableSize(v uint32) {
+	d.dynTab.allowedMaxSize = v
+}
+
+type dynamicTable struct {
+	// http://http2.github.io/http2-spec/compression.html#rfc.section.2.3.2
+	table          headerFieldTable
+	size           uint32 // in bytes
+	maxSize        uint32 // current maxSize
+	allowedMaxSize uint32 // maxSize may go up to this, inclusive
+}
+
+func (dt *dynamicTable) setMaxSize(v uint32) {
+	dt.maxSize = v
+	dt.evict()
+}
+
+func (dt *dynamicTable) add(f HeaderField) {
+	dt.table.addEntry(f)
+	dt.size += f.Size()
+	dt.evict()
+}
+
+// If we're too big, evict old stuff.
+func (dt *dynamicTable) evict() {
+	var n int
+	for dt.size > dt.maxSize && n < dt.table.len() {
+		dt.size -= dt.table.ents[n].Size()
+		n++
+	}
+	dt.table.evictOldest(n)
+}
+
+func (d *Decoder) maxTableIndex() int {
+	// This should never overflow. RFC 7540 Section 6.5.2 limits the size of
+	// the dynamic table to 2^32 bytes, where each entry will occupy more than
+	// one byte. Further, the staticTable has a fixed, small length.
+	return d.dynTab.table.len() + staticTable.len()
+}
+
+func (d *Decoder) at(i uint64) (hf HeaderField, ok bool) {
+	// See Section 2.3.3.
+	if i == 0 {
+		return
+	}
+	if i <= uint64(staticTable.len()) {
+		return staticTable.ents[i-1], true
+	}
+	if i > uint64(d.maxTableIndex()) {
+		return
+	}
+	// In the dynamic table, newer entries have lower indices.
+	// However, dt.ents[0] is the oldest entry. Hence, dt.ents is
+	// the reversed dynamic table.
+	dt := d.dynTab.table
+	return dt.ents[dt.len()-(int(i)-staticTable.len())], true
+}
+
+// Decode decodes an entire block.
+//
+// TODO: remove this method and make it incremental later? This is
+// easier for debugging now.
+func (d *Decoder) DecodeFull(p []byte) ([]HeaderField, error) {
+	var hf []HeaderField
+	saveFunc := d.emit
+	defer func() { d.emit = saveFunc }()
+	d.emit = func(f HeaderField) { hf = append(hf, f) }
+	if _, err := d.Write(p); err != nil {
+		return nil, err
+	}
+	if err := d.Close(); err != nil {
+		return nil, err
+	}
+	return hf, nil
+}
+
+// Close declares that the decoding is complete and resets the Decoder
+// to be reused again for a new header block. If there is any remaining
+// data in the decoder's buffer, Close returns an error.
+func (d *Decoder) Close() error {
+	if d.saveBuf.Len() > 0 {
+		d.saveBuf.Reset()
+		return DecodingError{errors.New("truncated headers")}
+	}
+	d.firstField = true
+	return nil
+}
+
+func (d *Decoder) Write(p []byte) (n int, err error) {
+	if len(p) == 0 {
+		// Prevent state machine CPU attacks (making us redo
+		// work up to the point of finding out we don't have
+		// enough data)
+		return
+	}
+	// Only copy the data if we have to. Optimistically assume
+	// that p will contain a complete header block.
+	if d.saveBuf.Len() == 0 {
+		d.buf = p
+	} else {
+		d.saveBuf.Write(p)
+		d.buf = d.saveBuf.Bytes()
+		d.saveBuf.Reset()
+	}
+
+	for len(d.buf) > 0 {
+		err = d.parseHeaderFieldRepr()
+		if err == errNeedMore {
+			// Extra paranoia, making sure saveBuf won't
+			// get too large. All the varint and string
+			// reading code earlier should already catch
+			// overlong things and return ErrStringLength,
+			// but keep this as a last resort.
+			const varIntOverhead = 8 // conservative
+			if d.maxStrLen != 0 && int64(len(d.buf)) > 2*(int64(d.maxStrLen)+varIntOverhead) {
+				return 0, ErrStringLength
+			}
+			d.saveBuf.Write(d.buf)
+			return len(p), nil
+		}
+		d.firstField = false
+		if err != nil {
+			break
+		}
+	}
+	return len(p), err
+}
+
+// errNeedMore is an internal sentinel error value that means the
+// buffer is truncated and we need to read more data before we can
+// continue parsing.
+var errNeedMore = errors.New("need more data")
+
+type indexType int
+
+const (
+	indexedTrue indexType = iota
+	indexedFalse
+	indexedNever
+)
+
+func (v indexType) indexed() bool   { return v == indexedTrue }
+func (v indexType) sensitive() bool { return v == indexedNever }
+
+// returns errNeedMore if there isn't enough data available.
+// any other error is fatal.
+// consumes d.buf iff it returns nil.
+// precondition: must be called with len(d.buf) > 0
+func (d *Decoder) parseHeaderFieldRepr() error {
+	b := d.buf[0]
+	switch {
+	case b&128 != 0:
+		// Indexed representation.
+		// High bit set?
+		// http://http2.github.io/http2-spec/compression.html#rfc.section.6.1
+		return d.parseFieldIndexed()
+	case b&192 == 64:
+		// 6.2.1 Literal Header Field with Incremental Indexing
+		// 0b10xxxxxx: top two bits are 10
+		// http://http2.github.io/http2-spec/compression.html#rfc.section.6.2.1
+		return d.parseFieldLiteral(6, indexedTrue)
+	case b&240 == 0:
+		// 6.2.2 Literal Header Field without Indexing
+		// 0b0000xxxx: top four bits are 0000
+		// http://http2.github.io/http2-spec/compression.html#rfc.section.6.2.2
+		return d.parseFieldLiteral(4, indexedFalse)
+	case b&240 == 16:
+		// 6.2.3 Literal Header Field never Indexed
+		// 0b0001xxxx: top four bits are 0001
+		// http://http2.github.io/http2-spec/compression.html#rfc.section.6.2.3
+		return d.parseFieldLiteral(4, indexedNever)
+	case b&224 == 32:
+		// 6.3 Dynamic Table Size Update
+		// Top three bits are '001'.
+		// http://http2.github.io/http2-spec/compression.html#rfc.section.6.3
+		return d.parseDynamicTableSizeUpdate()
+	}
+
+	return DecodingError{errors.New("invalid encoding")}
+}
+
+// (same invariants and behavior as parseHeaderFieldRepr)
+func (d *Decoder) parseFieldIndexed() error {
+	buf := d.buf
+	idx, buf, err := readVarInt(7, buf)
+	if err != nil {
+		return err
+	}
+	hf, ok := d.at(idx)
+	if !ok {
+		return DecodingError{InvalidIndexError(idx)}
+	}
+	d.buf = buf
+	return d.callEmit(HeaderField{Name: hf.Name, Value: hf.Value})
+}
+
+// (same invariants and behavior as parseHeaderFieldRepr)
+func (d *Decoder) parseFieldLiteral(n uint8, it indexType) error {
+	buf := d.buf
+	nameIdx, buf, err := readVarInt(n, buf)
+	if err != nil {
+		return err
+	}
+
+	var hf HeaderField
+	wantStr := d.emitEnabled || it.indexed()
+	if nameIdx > 0 {
+		ihf, ok := d.at(nameIdx)
+		if !ok {
+			return DecodingError{InvalidIndexError(nameIdx)}
+		}
+		hf.Name = ihf.Name
+	} else {
+		hf.Name, buf, err = d.readString(buf, wantStr)
+		if err != nil {
+			return err
+		}
+	}
+	hf.Value, buf, err = d.readString(buf, wantStr)
+	if err != nil {
+		return err
+	}
+	d.buf = buf
+	if it.indexed() {
+		d.dynTab.add(hf)
+	}
+	hf.Sensitive = it.sensitive()
+	return d.callEmit(hf)
+}
+
+func (d *Decoder) callEmit(hf HeaderField) error {
+	if d.maxStrLen != 0 {
+		if len(hf.Name) > d.maxStrLen || len(hf.Value) > d.maxStrLen {
+			return ErrStringLength
+		}
+	}
+	if d.emitEnabled {
+		d.emit(hf)
+	}
+	return nil
+}
+
+// (same invariants and behavior as parseHeaderFieldRepr)
+func (d *Decoder) parseDynamicTableSizeUpdate() error {
+	// RFC 7541, sec 4.2: This dynamic table size update MUST occur at the
+	// beginning of the first header block following the change to the dynamic table size.
+	if !d.firstField && d.dynTab.size > 0 {
+		return DecodingError{errors.New("dynamic table size update MUST occur at the beginning of a header block")}
+	}
+
+	buf := d.buf
+	size, buf, err := readVarInt(5, buf)
+	if err != nil {
+		return err
+	}
+	if size > uint64(d.dynTab.allowedMaxSize) {
+		return DecodingError{errors.New("dynamic table size update too large")}
+	}
+	d.dynTab.setMaxSize(uint32(size))
+	d.buf = buf
+	return nil
+}
+
+var errVarintOverflow = DecodingError{errors.New("varint integer overflow")}
+
+// readVarInt reads an unsigned variable length integer off the
+// beginning of p. n is the parameter as described in
+// http://http2.github.io/http2-spec/compression.html#rfc.section.5.1.
+//
+// n must always be between 1 and 8.
+//
+// The returned remain buffer is either a smaller suffix of p, or err != nil.
+// The error is errNeedMore if p doesn't contain a complete integer.
+func readVarInt(n byte, p []byte) (i uint64, remain []byte, err error) {
+	if n < 1 || n > 8 {
+		panic("bad n")
+	}
+	if len(p) == 0 {
+		return 0, p, errNeedMore
+	}
+	i = uint64(p[0])
+	if n < 8 {
+		i &= (1 << uint64(n)) - 1
+	}
+	if i < (1<<uint64(n))-1 {
+		return i, p[1:], nil
+	}
+
+	origP := p
+	p = p[1:]
+	var m uint64
+	for len(p) > 0 {
+		b := p[0]
+		p = p[1:]
+		i += uint64(b&127) << m
+		if b&128 == 0 {
+			return i, p, nil
+		}
+		m += 7
+		if m >= 63 { // TODO: proper overflow check. making this up.
+			return 0, origP, errVarintOverflow
+		}
+	}
+	return 0, origP, errNeedMore
+}
+
+// readString decodes an hpack string from p.
+//
+// wantStr is whether s will be used. If false, decompression and
+// []byte->string garbage are skipped if s will be ignored
+// anyway. This does mean that huffman decoding errors for non-indexed
+// strings past the MAX_HEADER_LIST_SIZE are ignored, but the server
+// is returning an error anyway, and because they're not indexed, the error
+// won't affect the decoding state.
+func (d *Decoder) readString(p []byte, wantStr bool) (s string, remain []byte, err error) {
+	if len(p) == 0 {
+		return "", p, errNeedMore
+	}
+	isHuff := p[0]&128 != 0
+	strLen, p, err := readVarInt(7, p)
+	if err != nil {
+		return "", p, err
+	}
+	if d.maxStrLen != 0 && strLen > uint64(d.maxStrLen) {
+		return "", nil, ErrStringLength
+	}
+	if uint64(len(p)) < strLen {
+		return "", p, errNeedMore
+	}
+	if !isHuff {
+		if wantStr {
+			s = string(p[:strLen])
+		}
+		return s, p[strLen:], nil
+	}
+
+	if wantStr {
+		buf := bufPool.Get().(*bytes.Buffer)
+		buf.Reset() // don't trust others
+		defer bufPool.Put(buf)
+		if err := huffmanDecode(buf, d.maxStrLen, p[:strLen]); err != nil {
+			buf.Reset()
+			return "", nil, err
+		}
+		s = buf.String()
+		buf.Reset() // be nice to GC
+	}
+	return s, p[strLen:], nil
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/huffman.go b/vendor/golang.org/x/net/http2/hpack/huffman.go
new file mode 100644
index 0000000..b412a96
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/huffman.go
@@ -0,0 +1,222 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+	"bytes"
+	"errors"
+	"io"
+	"sync"
+)
+
+var bufPool = sync.Pool{
+	New: func() interface{} { return new(bytes.Buffer) },
+}
+
+// HuffmanDecode decodes the string in v and writes the expanded
+// result to w, returning the number of bytes written to w and the
+// Write call's return value. At most one Write call is made.
+func HuffmanDecode(w io.Writer, v []byte) (int, error) {
+	buf := bufPool.Get().(*bytes.Buffer)
+	buf.Reset()
+	defer bufPool.Put(buf)
+	if err := huffmanDecode(buf, 0, v); err != nil {
+		return 0, err
+	}
+	return w.Write(buf.Bytes())
+}
+
+// HuffmanDecodeToString decodes the string in v.
+func HuffmanDecodeToString(v []byte) (string, error) {
+	buf := bufPool.Get().(*bytes.Buffer)
+	buf.Reset()
+	defer bufPool.Put(buf)
+	if err := huffmanDecode(buf, 0, v); err != nil {
+		return "", err
+	}
+	return buf.String(), nil
+}
+
+// ErrInvalidHuffman is returned for errors found decoding
+// Huffman-encoded strings.
+var ErrInvalidHuffman = errors.New("hpack: invalid Huffman-encoded data")
+
+// huffmanDecode decodes v to buf.
+// If maxLen is greater than 0, attempts to write more to buf than
+// maxLen bytes will return ErrStringLength.
+func huffmanDecode(buf *bytes.Buffer, maxLen int, v []byte) error {
+	rootHuffmanNode := getRootHuffmanNode()
+	n := rootHuffmanNode
+	// cur is the bit buffer that has not been fed into n.
+	// cbits is the number of low order bits in cur that are valid.
+	// sbits is the number of bits of the symbol prefix being decoded.
+	cur, cbits, sbits := uint(0), uint8(0), uint8(0)
+	for _, b := range v {
+		cur = cur<<8 | uint(b)
+		cbits += 8
+		sbits += 8
+		for cbits >= 8 {
+			idx := byte(cur >> (cbits - 8))
+			n = n.children[idx]
+			if n == nil {
+				return ErrInvalidHuffman
+			}
+			if n.children == nil {
+				if maxLen != 0 && buf.Len() == maxLen {
+					return ErrStringLength
+				}
+				buf.WriteByte(n.sym)
+				cbits -= n.codeLen
+				n = rootHuffmanNode
+				sbits = cbits
+			} else {
+				cbits -= 8
+			}
+		}
+	}
+	for cbits > 0 {
+		n = n.children[byte(cur<<(8-cbits))]
+		if n == nil {
+			return ErrInvalidHuffman
+		}
+		if n.children != nil || n.codeLen > cbits {
+			break
+		}
+		if maxLen != 0 && buf.Len() == maxLen {
+			return ErrStringLength
+		}
+		buf.WriteByte(n.sym)
+		cbits -= n.codeLen
+		n = rootHuffmanNode
+		sbits = cbits
+	}
+	if sbits > 7 {
+		// Either there was an incomplete symbol, or overlong padding.
+		// Both are decoding errors per RFC 7541 section 5.2.
+		return ErrInvalidHuffman
+	}
+	if mask := uint(1<<cbits - 1); cur&mask != mask {
+		// Trailing bits must be a prefix of EOS per RFC 7541 section 5.2.
+		return ErrInvalidHuffman
+	}
+
+	return nil
+}
+
+type node struct {
+	// children is non-nil for internal nodes
+	children *[256]*node
+
+	// The following are only valid if children is nil:
+	codeLen uint8 // number of bits that led to the output of sym
+	sym     byte  // output symbol
+}
+
+func newInternalNode() *node {
+	return &node{children: new([256]*node)}
+}
+
+var (
+	buildRootOnce       sync.Once
+	lazyRootHuffmanNode *node
+)
+
+func getRootHuffmanNode() *node {
+	buildRootOnce.Do(buildRootHuffmanNode)
+	return lazyRootHuffmanNode
+}
+
+func buildRootHuffmanNode() {
+	if len(huffmanCodes) != 256 {
+		panic("unexpected size")
+	}
+	lazyRootHuffmanNode = newInternalNode()
+	for i, code := range huffmanCodes {
+		addDecoderNode(byte(i), code, huffmanCodeLen[i])
+	}
+}
+
+func addDecoderNode(sym byte, code uint32, codeLen uint8) {
+	cur := lazyRootHuffmanNode
+	for codeLen > 8 {
+		codeLen -= 8
+		i := uint8(code >> codeLen)
+		if cur.children[i] == nil {
+			cur.children[i] = newInternalNode()
+		}
+		cur = cur.children[i]
+	}
+	shift := 8 - codeLen
+	start, end := int(uint8(code<<shift)), int(1<<shift)
+	for i := start; i < start+end; i++ {
+		cur.children[i] = &node{sym: sym, codeLen: codeLen}
+	}
+}
+
+// AppendHuffmanString appends s, as encoded in Huffman codes, to dst
+// and returns the extended buffer.
+func AppendHuffmanString(dst []byte, s string) []byte {
+	rembits := uint8(8)
+
+	for i := 0; i < len(s); i++ {
+		if rembits == 8 {
+			dst = append(dst, 0)
+		}
+		dst, rembits = appendByteToHuffmanCode(dst, rembits, s[i])
+	}
+
+	if rembits < 8 {
+		// special EOS symbol
+		code := uint32(0x3fffffff)
+		nbits := uint8(30)
+
+		t := uint8(code >> (nbits - rembits))
+		dst[len(dst)-1] |= t
+	}
+
+	return dst
+}
+
+// HuffmanEncodeLength returns the number of bytes required to encode
+// s in Huffman codes. The result is round up to byte boundary.
+func HuffmanEncodeLength(s string) uint64 {
+	n := uint64(0)
+	for i := 0; i < len(s); i++ {
+		n += uint64(huffmanCodeLen[s[i]])
+	}
+	return (n + 7) / 8
+}
+
+// appendByteToHuffmanCode appends Huffman code for c to dst and
+// returns the extended buffer and the remaining bits in the last
+// element. The appending is not byte aligned and the remaining bits
+// in the last element of dst is given in rembits.
+func appendByteToHuffmanCode(dst []byte, rembits uint8, c byte) ([]byte, uint8) {
+	code := huffmanCodes[c]
+	nbits := huffmanCodeLen[c]
+
+	for {
+		if rembits > nbits {
+			t := uint8(code << (rembits - nbits))
+			dst[len(dst)-1] |= t
+			rembits -= nbits
+			break
+		}
+
+		t := uint8(code >> (nbits - rembits))
+		dst[len(dst)-1] |= t
+
+		nbits -= rembits
+		rembits = 8
+
+		if nbits == 0 {
+			break
+		}
+
+		dst = append(dst, 0)
+	}
+
+	return dst, rembits
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/tables.go b/vendor/golang.org/x/net/http2/hpack/tables.go
new file mode 100644
index 0000000..a66cfbe
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/tables.go
@@ -0,0 +1,479 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+	"fmt"
+)
+
+// headerFieldTable implements a list of HeaderFields.
+// This is used to implement the static and dynamic tables.
+type headerFieldTable struct {
+	// For static tables, entries are never evicted.
+	//
+	// For dynamic tables, entries are evicted from ents[0] and added to the end.
+	// Each entry has a unique id that starts at one and increments for each
+	// entry that is added. This unique id is stable across evictions, meaning
+	// it can be used as a pointer to a specific entry. As in hpack, unique ids
+	// are 1-based. The unique id for ents[k] is k + evictCount + 1.
+	//
+	// Zero is not a valid unique id.
+	//
+	// evictCount should not overflow in any remotely practical situation. In
+	// practice, we will have one dynamic table per HTTP/2 connection. If we
+	// assume a very powerful server that handles 1M QPS per connection and each
+	// request adds (then evicts) 100 entries from the table, it would still take
+	// 2M years for evictCount to overflow.
+	ents       []HeaderField
+	evictCount uint64
+
+	// byName maps a HeaderField name to the unique id of the newest entry with
+	// the same name. See above for a definition of "unique id".
+	byName map[string]uint64
+
+	// byNameValue maps a HeaderField name/value pair to the unique id of the newest
+	// entry with the same name and value. See above for a definition of "unique id".
+	byNameValue map[pairNameValue]uint64
+}
+
+type pairNameValue struct {
+	name, value string
+}
+
+func (t *headerFieldTable) init() {
+	t.byName = make(map[string]uint64)
+	t.byNameValue = make(map[pairNameValue]uint64)
+}
+
+// len reports the number of entries in the table.
+func (t *headerFieldTable) len() int {
+	return len(t.ents)
+}
+
+// addEntry adds a new entry.
+func (t *headerFieldTable) addEntry(f HeaderField) {
+	id := uint64(t.len()) + t.evictCount + 1
+	t.byName[f.Name] = id
+	t.byNameValue[pairNameValue{f.Name, f.Value}] = id
+	t.ents = append(t.ents, f)
+}
+
+// evictOldest evicts the n oldest entries in the table.
+func (t *headerFieldTable) evictOldest(n int) {
+	if n > t.len() {
+		panic(fmt.Sprintf("evictOldest(%v) on table with %v entries", n, t.len()))
+	}
+	for k := 0; k < n; k++ {
+		f := t.ents[k]
+		id := t.evictCount + uint64(k) + 1
+		if t.byName[f.Name] == id {
+			delete(t.byName, f.Name)
+		}
+		if p := (pairNameValue{f.Name, f.Value}); t.byNameValue[p] == id {
+			delete(t.byNameValue, p)
+		}
+	}
+	copy(t.ents, t.ents[n:])
+	for k := t.len() - n; k < t.len(); k++ {
+		t.ents[k] = HeaderField{} // so strings can be garbage collected
+	}
+	t.ents = t.ents[:t.len()-n]
+	if t.evictCount+uint64(n) < t.evictCount {
+		panic("evictCount overflow")
+	}
+	t.evictCount += uint64(n)
+}
+
+// search finds f in the table. If there is no match, i is 0.
+// If both name and value match, i is the matched index and nameValueMatch
+// becomes true. If only name matches, i points to that index and
+// nameValueMatch becomes false.
+//
+// The returned index is a 1-based HPACK index. For dynamic tables, HPACK says
+// that index 1 should be the newest entry, but t.ents[0] is the oldest entry,
+// meaning t.ents is reversed for dynamic tables. Hence, when t is a dynamic
+// table, the return value i actually refers to the entry t.ents[t.len()-i].
+//
+// All tables are assumed to be a dynamic tables except for the global
+// staticTable pointer.
+//
+// See Section 2.3.3.
+func (t *headerFieldTable) search(f HeaderField) (i uint64, nameValueMatch bool) {
+	if !f.Sensitive {
+		if id := t.byNameValue[pairNameValue{f.Name, f.Value}]; id != 0 {
+			return t.idToIndex(id), true
+		}
+	}
+	if id := t.byName[f.Name]; id != 0 {
+		return t.idToIndex(id), false
+	}
+	return 0, false
+}
+
+// idToIndex converts a unique id to an HPACK index.
+// See Section 2.3.3.
+func (t *headerFieldTable) idToIndex(id uint64) uint64 {
+	if id <= t.evictCount {
+		panic(fmt.Sprintf("id (%v) <= evictCount (%v)", id, t.evictCount))
+	}
+	k := id - t.evictCount - 1 // convert id to an index t.ents[k]
+	if t != staticTable {
+		return uint64(t.len()) - k // dynamic table
+	}
+	return k + 1
+}
+
+// http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-07#appendix-B
+var staticTable = newStaticTable()
+var staticTableEntries = [...]HeaderField{
+	{Name: ":authority"},
+	{Name: ":method", Value: "GET"},
+	{Name: ":method", Value: "POST"},
+	{Name: ":path", Value: "/"},
+	{Name: ":path", Value: "/index.html"},
+	{Name: ":scheme", Value: "http"},
+	{Name: ":scheme", Value: "https"},
+	{Name: ":status", Value: "200"},
+	{Name: ":status", Value: "204"},
+	{Name: ":status", Value: "206"},
+	{Name: ":status", Value: "304"},
+	{Name: ":status", Value: "400"},
+	{Name: ":status", Value: "404"},
+	{Name: ":status", Value: "500"},
+	{Name: "accept-charset"},
+	{Name: "accept-encoding", Value: "gzip, deflate"},
+	{Name: "accept-language"},
+	{Name: "accept-ranges"},
+	{Name: "accept"},
+	{Name: "access-control-allow-origin"},
+	{Name: "age"},
+	{Name: "allow"},
+	{Name: "authorization"},
+	{Name: "cache-control"},
+	{Name: "content-disposition"},
+	{Name: "content-encoding"},
+	{Name: "content-language"},
+	{Name: "content-length"},
+	{Name: "content-location"},
+	{Name: "content-range"},
+	{Name: "content-type"},
+	{Name: "cookie"},
+	{Name: "date"},
+	{Name: "etag"},
+	{Name: "expect"},
+	{Name: "expires"},
+	{Name: "from"},
+	{Name: "host"},
+	{Name: "if-match"},
+	{Name: "if-modified-since"},
+	{Name: "if-none-match"},
+	{Name: "if-range"},
+	{Name: "if-unmodified-since"},
+	{Name: "last-modified"},
+	{Name: "link"},
+	{Name: "location"},
+	{Name: "max-forwards"},
+	{Name: "proxy-authenticate"},
+	{Name: "proxy-authorization"},
+	{Name: "range"},
+	{Name: "referer"},
+	{Name: "refresh"},
+	{Name: "retry-after"},
+	{Name: "server"},
+	{Name: "set-cookie"},
+	{Name: "strict-transport-security"},
+	{Name: "transfer-encoding"},
+	{Name: "user-agent"},
+	{Name: "vary"},
+	{Name: "via"},
+	{Name: "www-authenticate"},
+}
+
+func newStaticTable() *headerFieldTable {
+	t := &headerFieldTable{}
+	t.init()
+	for _, e := range staticTableEntries[:] {
+		t.addEntry(e)
+	}
+	return t
+}
+
+var huffmanCodes = [256]uint32{
+	0x1ff8,
+	0x7fffd8,
+	0xfffffe2,
+	0xfffffe3,
+	0xfffffe4,
+	0xfffffe5,
+	0xfffffe6,
+	0xfffffe7,
+	0xfffffe8,
+	0xffffea,
+	0x3ffffffc,
+	0xfffffe9,
+	0xfffffea,
+	0x3ffffffd,
+	0xfffffeb,
+	0xfffffec,
+	0xfffffed,
+	0xfffffee,
+	0xfffffef,
+	0xffffff0,
+	0xffffff1,
+	0xffffff2,
+	0x3ffffffe,
+	0xffffff3,
+	0xffffff4,
+	0xffffff5,
+	0xffffff6,
+	0xffffff7,
+	0xffffff8,
+	0xffffff9,
+	0xffffffa,
+	0xffffffb,
+	0x14,
+	0x3f8,
+	0x3f9,
+	0xffa,
+	0x1ff9,
+	0x15,
+	0xf8,
+	0x7fa,
+	0x3fa,
+	0x3fb,
+	0xf9,
+	0x7fb,
+	0xfa,
+	0x16,
+	0x17,
+	0x18,
+	0x0,
+	0x1,
+	0x2,
+	0x19,
+	0x1a,
+	0x1b,
+	0x1c,
+	0x1d,
+	0x1e,
+	0x1f,
+	0x5c,
+	0xfb,
+	0x7ffc,
+	0x20,
+	0xffb,
+	0x3fc,
+	0x1ffa,
+	0x21,
+	0x5d,
+	0x5e,
+	0x5f,
+	0x60,
+	0x61,
+	0x62,
+	0x63,
+	0x64,
+	0x65,
+	0x66,
+	0x67,
+	0x68,
+	0x69,
+	0x6a,
+	0x6b,
+	0x6c,
+	0x6d,
+	0x6e,
+	0x6f,
+	0x70,
+	0x71,
+	0x72,
+	0xfc,
+	0x73,
+	0xfd,
+	0x1ffb,
+	0x7fff0,
+	0x1ffc,
+	0x3ffc,
+	0x22,
+	0x7ffd,
+	0x3,
+	0x23,
+	0x4,
+	0x24,
+	0x5,
+	0x25,
+	0x26,
+	0x27,
+	0x6,
+	0x74,
+	0x75,
+	0x28,
+	0x29,
+	0x2a,
+	0x7,
+	0x2b,
+	0x76,
+	0x2c,
+	0x8,
+	0x9,
+	0x2d,
+	0x77,
+	0x78,
+	0x79,
+	0x7a,
+	0x7b,
+	0x7ffe,
+	0x7fc,
+	0x3ffd,
+	0x1ffd,
+	0xffffffc,
+	0xfffe6,
+	0x3fffd2,
+	0xfffe7,
+	0xfffe8,
+	0x3fffd3,
+	0x3fffd4,
+	0x3fffd5,
+	0x7fffd9,
+	0x3fffd6,
+	0x7fffda,
+	0x7fffdb,
+	0x7fffdc,
+	0x7fffdd,
+	0x7fffde,
+	0xffffeb,
+	0x7fffdf,
+	0xffffec,
+	0xffffed,
+	0x3fffd7,
+	0x7fffe0,
+	0xffffee,
+	0x7fffe1,
+	0x7fffe2,
+	0x7fffe3,
+	0x7fffe4,
+	0x1fffdc,
+	0x3fffd8,
+	0x7fffe5,
+	0x3fffd9,
+	0x7fffe6,
+	0x7fffe7,
+	0xffffef,
+	0x3fffda,
+	0x1fffdd,
+	0xfffe9,
+	0x3fffdb,
+	0x3fffdc,
+	0x7fffe8,
+	0x7fffe9,
+	0x1fffde,
+	0x7fffea,
+	0x3fffdd,
+	0x3fffde,
+	0xfffff0,
+	0x1fffdf,
+	0x3fffdf,
+	0x7fffeb,
+	0x7fffec,
+	0x1fffe0,
+	0x1fffe1,
+	0x3fffe0,
+	0x1fffe2,
+	0x7fffed,
+	0x3fffe1,
+	0x7fffee,
+	0x7fffef,
+	0xfffea,
+	0x3fffe2,
+	0x3fffe3,
+	0x3fffe4,
+	0x7ffff0,
+	0x3fffe5,
+	0x3fffe6,
+	0x7ffff1,
+	0x3ffffe0,
+	0x3ffffe1,
+	0xfffeb,
+	0x7fff1,
+	0x3fffe7,
+	0x7ffff2,
+	0x3fffe8,
+	0x1ffffec,
+	0x3ffffe2,
+	0x3ffffe3,
+	0x3ffffe4,
+	0x7ffffde,
+	0x7ffffdf,
+	0x3ffffe5,
+	0xfffff1,
+	0x1ffffed,
+	0x7fff2,
+	0x1fffe3,
+	0x3ffffe6,
+	0x7ffffe0,
+	0x7ffffe1,
+	0x3ffffe7,
+	0x7ffffe2,
+	0xfffff2,
+	0x1fffe4,
+	0x1fffe5,
+	0x3ffffe8,
+	0x3ffffe9,
+	0xffffffd,
+	0x7ffffe3,
+	0x7ffffe4,
+	0x7ffffe5,
+	0xfffec,
+	0xfffff3,
+	0xfffed,
+	0x1fffe6,
+	0x3fffe9,
+	0x1fffe7,
+	0x1fffe8,
+	0x7ffff3,
+	0x3fffea,
+	0x3fffeb,
+	0x1ffffee,
+	0x1ffffef,
+	0xfffff4,
+	0xfffff5,
+	0x3ffffea,
+	0x7ffff4,
+	0x3ffffeb,
+	0x7ffffe6,
+	0x3ffffec,
+	0x3ffffed,
+	0x7ffffe7,
+	0x7ffffe8,
+	0x7ffffe9,
+	0x7ffffea,
+	0x7ffffeb,
+	0xffffffe,
+	0x7ffffec,
+	0x7ffffed,
+	0x7ffffee,
+	0x7ffffef,
+	0x7fffff0,
+	0x3ffffee,
+}
+
+var huffmanCodeLen = [256]uint8{
+	13, 23, 28, 28, 28, 28, 28, 28, 28, 24, 30, 28, 28, 30, 28, 28,
+	28, 28, 28, 28, 28, 28, 30, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+	6, 10, 10, 12, 13, 6, 8, 11, 10, 10, 8, 11, 8, 6, 6, 6,
+	5, 5, 5, 6, 6, 6, 6, 6, 6, 6, 7, 8, 15, 6, 12, 10,
+	13, 6, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	7, 7, 7, 7, 7, 7, 7, 7, 8, 7, 8, 13, 19, 13, 14, 6,
+	15, 5, 6, 5, 6, 5, 6, 6, 6, 5, 7, 7, 6, 6, 6, 5,
+	6, 7, 6, 5, 5, 6, 7, 7, 7, 7, 7, 15, 11, 14, 13, 28,
+	20, 22, 20, 20, 22, 22, 22, 23, 22, 23, 23, 23, 23, 23, 24, 23,
+	24, 24, 22, 23, 24, 23, 23, 23, 23, 21, 22, 23, 22, 23, 23, 24,
+	22, 21, 20, 22, 22, 23, 23, 21, 23, 22, 22, 24, 21, 22, 23, 23,
+	21, 21, 22, 21, 23, 22, 23, 23, 20, 22, 22, 22, 23, 22, 22, 23,
+	26, 26, 20, 19, 22, 23, 22, 25, 26, 26, 26, 27, 27, 26, 24, 25,
+	19, 21, 26, 27, 27, 26, 27, 24, 21, 21, 26, 26, 28, 27, 27, 27,
+	20, 24, 20, 21, 22, 21, 21, 23, 22, 22, 25, 25, 24, 24, 26, 23,
+	26, 27, 26, 26, 27, 27, 27, 27, 27, 28, 27, 27, 27, 27, 27, 26,
+}
diff --git a/vendor/golang.org/x/net/http2/http2.go b/vendor/golang.org/x/net/http2/http2.go
new file mode 100644
index 0000000..27cc893
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/http2.go
@@ -0,0 +1,378 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package http2 implements the HTTP/2 protocol.
+//
+// This package is low-level and intended to be used directly by very
+// few people. Most users will use it indirectly through the automatic
+// use by the net/http package (from Go 1.6 and later).
+// For use in earlier Go versions see ConfigureServer. (Transport support
+// requires Go 1.6 or later)
+//
+// See https://http2.github.io/ for more information on HTTP/2.
+//
+// See https://http2.golang.org/ for a test server running this code.
+//
+package http2 // import "golang.org/x/net/http2"
+
+import (
+	"bufio"
+	"crypto/tls"
+	"fmt"
+	"io"
+	"net/http"
+	"os"
+	"sort"
+	"strconv"
+	"strings"
+	"sync"
+
+	"golang.org/x/net/http/httpguts"
+)
+
+var (
+	VerboseLogs    bool
+	logFrameWrites bool
+	logFrameReads  bool
+	inTests        bool
+)
+
+func init() {
+	e := os.Getenv("GODEBUG")
+	if strings.Contains(e, "http2debug=1") {
+		VerboseLogs = true
+	}
+	if strings.Contains(e, "http2debug=2") {
+		VerboseLogs = true
+		logFrameWrites = true
+		logFrameReads = true
+	}
+}
+
+const (
+	// ClientPreface is the string that must be sent by new
+	// connections from clients.
+	ClientPreface = "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n"
+
+	// SETTINGS_MAX_FRAME_SIZE default
+	// http://http2.github.io/http2-spec/#rfc.section.6.5.2
+	initialMaxFrameSize = 16384
+
+	// NextProtoTLS is the NPN/ALPN protocol negotiated during
+	// HTTP/2's TLS setup.
+	NextProtoTLS = "h2"
+
+	// http://http2.github.io/http2-spec/#SettingValues
+	initialHeaderTableSize = 4096
+
+	initialWindowSize = 65535 // 6.9.2 Initial Flow Control Window Size
+
+	defaultMaxReadFrameSize = 1 << 20
+)
+
+var (
+	clientPreface = []byte(ClientPreface)
+)
+
+type streamState int
+
+// HTTP/2 stream states.
+//
+// See http://tools.ietf.org/html/rfc7540#section-5.1.
+//
+// For simplicity, the server code merges "reserved (local)" into
+// "half-closed (remote)". This is one less state transition to track.
+// The only downside is that we send PUSH_PROMISEs slightly less
+// liberally than allowable. More discussion here:
+// https://lists.w3.org/Archives/Public/ietf-http-wg/2016JulSep/0599.html
+//
+// "reserved (remote)" is omitted since the client code does not
+// support server push.
+const (
+	stateIdle streamState = iota
+	stateOpen
+	stateHalfClosedLocal
+	stateHalfClosedRemote
+	stateClosed
+)
+
+var stateName = [...]string{
+	stateIdle:             "Idle",
+	stateOpen:             "Open",
+	stateHalfClosedLocal:  "HalfClosedLocal",
+	stateHalfClosedRemote: "HalfClosedRemote",
+	stateClosed:           "Closed",
+}
+
+func (st streamState) String() string {
+	return stateName[st]
+}
+
+// Setting is a setting parameter: which setting it is, and its value.
+type Setting struct {
+	// ID is which setting is being set.
+	// See http://http2.github.io/http2-spec/#SettingValues
+	ID SettingID
+
+	// Val is the value.
+	Val uint32
+}
+
+func (s Setting) String() string {
+	return fmt.Sprintf("[%v = %d]", s.ID, s.Val)
+}
+
+// Valid reports whether the setting is valid.
+func (s Setting) Valid() error {
+	// Limits and error codes from 6.5.2 Defined SETTINGS Parameters
+	switch s.ID {
+	case SettingEnablePush:
+		if s.Val != 1 && s.Val != 0 {
+			return ConnectionError(ErrCodeProtocol)
+		}
+	case SettingInitialWindowSize:
+		if s.Val > 1<<31-1 {
+			return ConnectionError(ErrCodeFlowControl)
+		}
+	case SettingMaxFrameSize:
+		if s.Val < 16384 || s.Val > 1<<24-1 {
+			return ConnectionError(ErrCodeProtocol)
+		}
+	}
+	return nil
+}
+
+// A SettingID is an HTTP/2 setting as defined in
+// http://http2.github.io/http2-spec/#iana-settings
+type SettingID uint16
+
+const (
+	SettingHeaderTableSize      SettingID = 0x1
+	SettingEnablePush           SettingID = 0x2
+	SettingMaxConcurrentStreams SettingID = 0x3
+	SettingInitialWindowSize    SettingID = 0x4
+	SettingMaxFrameSize         SettingID = 0x5
+	SettingMaxHeaderListSize    SettingID = 0x6
+)
+
+var settingName = map[SettingID]string{
+	SettingHeaderTableSize:      "HEADER_TABLE_SIZE",
+	SettingEnablePush:           "ENABLE_PUSH",
+	SettingMaxConcurrentStreams: "MAX_CONCURRENT_STREAMS",
+	SettingInitialWindowSize:    "INITIAL_WINDOW_SIZE",
+	SettingMaxFrameSize:         "MAX_FRAME_SIZE",
+	SettingMaxHeaderListSize:    "MAX_HEADER_LIST_SIZE",
+}
+
+func (s SettingID) String() string {
+	if v, ok := settingName[s]; ok {
+		return v
+	}
+	return fmt.Sprintf("UNKNOWN_SETTING_%d", uint16(s))
+}
+
+// validWireHeaderFieldName reports whether v is a valid header field
+// name (key). See httpguts.ValidHeaderName for the base rules.
+//
+// Further, http2 says:
+//   "Just as in HTTP/1.x, header field names are strings of ASCII
+//   characters that are compared in a case-insensitive
+//   fashion. However, header field names MUST be converted to
+//   lowercase prior to their encoding in HTTP/2. "
+func validWireHeaderFieldName(v string) bool {
+	if len(v) == 0 {
+		return false
+	}
+	for _, r := range v {
+		if !httpguts.IsTokenRune(r) {
+			return false
+		}
+		if 'A' <= r && r <= 'Z' {
+			return false
+		}
+	}
+	return true
+}
+
+func httpCodeString(code int) string {
+	switch code {
+	case 200:
+		return "200"
+	case 404:
+		return "404"
+	}
+	return strconv.Itoa(code)
+}
+
+// from pkg io
+type stringWriter interface {
+	WriteString(s string) (n int, err error)
+}
+
+// A gate lets two goroutines coordinate their activities.
+type gate chan struct{}
+
+func (g gate) Done() { g <- struct{}{} }
+func (g gate) Wait() { <-g }
+
+// A closeWaiter is like a sync.WaitGroup but only goes 1 to 0 (open to closed).
+type closeWaiter chan struct{}
+
+// Init makes a closeWaiter usable.
+// It exists because so a closeWaiter value can be placed inside a
+// larger struct and have the Mutex and Cond's memory in the same
+// allocation.
+func (cw *closeWaiter) Init() {
+	*cw = make(chan struct{})
+}
+
+// Close marks the closeWaiter as closed and unblocks any waiters.
+func (cw closeWaiter) Close() {
+	close(cw)
+}
+
+// Wait waits for the closeWaiter to become closed.
+func (cw closeWaiter) Wait() {
+	<-cw
+}
+
+// bufferedWriter is a buffered writer that writes to w.
+// Its buffered writer is lazily allocated as needed, to minimize
+// idle memory usage with many connections.
+type bufferedWriter struct {
+	w  io.Writer     // immutable
+	bw *bufio.Writer // non-nil when data is buffered
+}
+
+func newBufferedWriter(w io.Writer) *bufferedWriter {
+	return &bufferedWriter{w: w}
+}
+
+// bufWriterPoolBufferSize is the size of bufio.Writer's
+// buffers created using bufWriterPool.
+//
+// TODO: pick a less arbitrary value? this is a bit under
+// (3 x typical 1500 byte MTU) at least. Other than that,
+// not much thought went into it.
+const bufWriterPoolBufferSize = 4 << 10
+
+var bufWriterPool = sync.Pool{
+	New: func() interface{} {
+		return bufio.NewWriterSize(nil, bufWriterPoolBufferSize)
+	},
+}
+
+func (w *bufferedWriter) Available() int {
+	if w.bw == nil {
+		return bufWriterPoolBufferSize
+	}
+	return w.bw.Available()
+}
+
+func (w *bufferedWriter) Write(p []byte) (n int, err error) {
+	if w.bw == nil {
+		bw := bufWriterPool.Get().(*bufio.Writer)
+		bw.Reset(w.w)
+		w.bw = bw
+	}
+	return w.bw.Write(p)
+}
+
+func (w *bufferedWriter) Flush() error {
+	bw := w.bw
+	if bw == nil {
+		return nil
+	}
+	err := bw.Flush()
+	bw.Reset(nil)
+	bufWriterPool.Put(bw)
+	w.bw = nil
+	return err
+}
+
+func mustUint31(v int32) uint32 {
+	if v < 0 || v > 2147483647 {
+		panic("out of range")
+	}
+	return uint32(v)
+}
+
+// bodyAllowedForStatus reports whether a given response status code
+// permits a body. See RFC 7230, section 3.3.
+func bodyAllowedForStatus(status int) bool {
+	switch {
+	case status >= 100 && status <= 199:
+		return false
+	case status == 204:
+		return false
+	case status == 304:
+		return false
+	}
+	return true
+}
+
+type httpError struct {
+	msg     string
+	timeout bool
+}
+
+func (e *httpError) Error() string   { return e.msg }
+func (e *httpError) Timeout() bool   { return e.timeout }
+func (e *httpError) Temporary() bool { return true }
+
+var errTimeout error = &httpError{msg: "http2: timeout awaiting response headers", timeout: true}
+
+type connectionStater interface {
+	ConnectionState() tls.ConnectionState
+}
+
+var sorterPool = sync.Pool{New: func() interface{} { return new(sorter) }}
+
+type sorter struct {
+	v []string // owned by sorter
+}
+
+func (s *sorter) Len() int           { return len(s.v) }
+func (s *sorter) Swap(i, j int)      { s.v[i], s.v[j] = s.v[j], s.v[i] }
+func (s *sorter) Less(i, j int) bool { return s.v[i] < s.v[j] }
+
+// Keys returns the sorted keys of h.
+//
+// The returned slice is only valid until s used again or returned to
+// its pool.
+func (s *sorter) Keys(h http.Header) []string {
+	keys := s.v[:0]
+	for k := range h {
+		keys = append(keys, k)
+	}
+	s.v = keys
+	sort.Sort(s)
+	return keys
+}
+
+func (s *sorter) SortStrings(ss []string) {
+	// Our sorter works on s.v, which sorter owns, so
+	// stash it away while we sort the user's buffer.
+	save := s.v
+	s.v = ss
+	sort.Sort(s)
+	s.v = save
+}
+
+// validPseudoPath reports whether v is a valid :path pseudo-header
+// value. It must be either:
+//
+//     *) a non-empty string starting with '/'
+//     *) the string '*', for OPTIONS requests.
+//
+// For now this is only used a quick check for deciding when to clean
+// up Opaque URLs before sending requests from the Transport.
+// See golang.org/issue/16847
+//
+// We used to enforce that the path also didn't start with "//", but
+// Google's GFE accepts such paths and Chrome sends them, so ignore
+// that part of the spec. See golang.org/issue/19103.
+func validPseudoPath(v string) bool {
+	return (len(v) > 0 && v[0] == '/') || v == "*"
+}
diff --git a/vendor/golang.org/x/net/http2/not_go111.go b/vendor/golang.org/x/net/http2/not_go111.go
new file mode 100644
index 0000000..161bca7
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/not_go111.go
@@ -0,0 +1,20 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !go1.11
+
+package http2
+
+import (
+	"net/http/httptrace"
+	"net/textproto"
+)
+
+func traceHasWroteHeaderField(trace *httptrace.ClientTrace) bool { return false }
+
+func traceWroteHeaderField(trace *httptrace.ClientTrace, k, v string) {}
+
+func traceGot1xxResponseFunc(trace *httptrace.ClientTrace) func(int, textproto.MIMEHeader) error {
+	return nil
+}
diff --git a/vendor/golang.org/x/net/http2/pipe.go b/vendor/golang.org/x/net/http2/pipe.go
new file mode 100644
index 0000000..2a5399e
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/pipe.go
@@ -0,0 +1,168 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"errors"
+	"io"
+	"sync"
+)
+
+// pipe is a goroutine-safe io.Reader/io.Writer pair. It's like
+// io.Pipe except there are no PipeReader/PipeWriter halves, and the
+// underlying buffer is an interface. (io.Pipe is always unbuffered)
+type pipe struct {
+	mu       sync.Mutex
+	c        sync.Cond     // c.L lazily initialized to &p.mu
+	b        pipeBuffer    // nil when done reading
+	unread   int           // bytes unread when done
+	err      error         // read error once empty. non-nil means closed.
+	breakErr error         // immediate read error (caller doesn't see rest of b)
+	donec    chan struct{} // closed on error
+	readFn   func()        // optional code to run in Read before error
+}
+
+type pipeBuffer interface {
+	Len() int
+	io.Writer
+	io.Reader
+}
+
+func (p *pipe) Len() int {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.b == nil {
+		return p.unread
+	}
+	return p.b.Len()
+}
+
+// Read waits until data is available and copies bytes
+// from the buffer into p.
+func (p *pipe) Read(d []byte) (n int, err error) {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.c.L == nil {
+		p.c.L = &p.mu
+	}
+	for {
+		if p.breakErr != nil {
+			return 0, p.breakErr
+		}
+		if p.b != nil && p.b.Len() > 0 {
+			return p.b.Read(d)
+		}
+		if p.err != nil {
+			if p.readFn != nil {
+				p.readFn()     // e.g. copy trailers
+				p.readFn = nil // not sticky like p.err
+			}
+			p.b = nil
+			return 0, p.err
+		}
+		p.c.Wait()
+	}
+}
+
+var errClosedPipeWrite = errors.New("write on closed buffer")
+
+// Write copies bytes from p into the buffer and wakes a reader.
+// It is an error to write more data than the buffer can hold.
+func (p *pipe) Write(d []byte) (n int, err error) {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.c.L == nil {
+		p.c.L = &p.mu
+	}
+	defer p.c.Signal()
+	if p.err != nil {
+		return 0, errClosedPipeWrite
+	}
+	if p.breakErr != nil {
+		p.unread += len(d)
+		return len(d), nil // discard when there is no reader
+	}
+	return p.b.Write(d)
+}
+
+// CloseWithError causes the next Read (waking up a current blocked
+// Read if needed) to return the provided err after all data has been
+// read.
+//
+// The error must be non-nil.
+func (p *pipe) CloseWithError(err error) { p.closeWithError(&p.err, err, nil) }
+
+// BreakWithError causes the next Read (waking up a current blocked
+// Read if needed) to return the provided err immediately, without
+// waiting for unread data.
+func (p *pipe) BreakWithError(err error) { p.closeWithError(&p.breakErr, err, nil) }
+
+// closeWithErrorAndCode is like CloseWithError but also sets some code to run
+// in the caller's goroutine before returning the error.
+func (p *pipe) closeWithErrorAndCode(err error, fn func()) { p.closeWithError(&p.err, err, fn) }
+
+func (p *pipe) closeWithError(dst *error, err error, fn func()) {
+	if err == nil {
+		panic("err must be non-nil")
+	}
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.c.L == nil {
+		p.c.L = &p.mu
+	}
+	defer p.c.Signal()
+	if *dst != nil {
+		// Already been done.
+		return
+	}
+	p.readFn = fn
+	if dst == &p.breakErr {
+		if p.b != nil {
+			p.unread += p.b.Len()
+		}
+		p.b = nil
+	}
+	*dst = err
+	p.closeDoneLocked()
+}
+
+// requires p.mu be held.
+func (p *pipe) closeDoneLocked() {
+	if p.donec == nil {
+		return
+	}
+	// Close if unclosed. This isn't racy since we always
+	// hold p.mu while closing.
+	select {
+	case <-p.donec:
+	default:
+		close(p.donec)
+	}
+}
+
+// Err returns the error (if any) first set by BreakWithError or CloseWithError.
+func (p *pipe) Err() error {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.breakErr != nil {
+		return p.breakErr
+	}
+	return p.err
+}
+
+// Done returns a channel which is closed if and when this pipe is closed
+// with CloseWithError.
+func (p *pipe) Done() <-chan struct{} {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.donec == nil {
+		p.donec = make(chan struct{})
+		if p.err != nil || p.breakErr != nil {
+			// Already hit an error.
+			p.closeDoneLocked()
+		}
+	}
+	return p.donec
+}
diff --git a/vendor/golang.org/x/net/http2/server.go b/vendor/golang.org/x/net/http2/server.go
new file mode 100644
index 0000000..bc9e41a
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/server.go
@@ -0,0 +1,2962 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// TODO: turn off the serve goroutine when idle, so
+// an idle conn only has the readFrames goroutine active. (which could
+// also be optimized probably to pin less memory in crypto/tls). This
+// would involve tracking when the serve goroutine is active (atomic
+// int32 read/CAS probably?) and starting it up when frames arrive,
+// and shutting it down when all handlers exit. the occasional PING
+// packets could use time.AfterFunc to call sc.wakeStartServeLoop()
+// (which is a no-op if already running) and then queue the PING write
+// as normal. The serve loop would then exit in most cases (if no
+// Handlers running) and not be woken up again until the PING packet
+// returns.
+
+// TODO (maybe): add a mechanism for Handlers to going into
+// half-closed-local mode (rw.(io.Closer) test?) but not exit their
+// handler, and continue to be able to read from the
+// Request.Body. This would be a somewhat semantic change from HTTP/1
+// (or at least what we expose in net/http), so I'd probably want to
+// add it there too. For now, this package says that returning from
+// the Handler ServeHTTP function means you're both done reading and
+// done writing, without a way to stop just one or the other.
+
+package http2
+
+import (
+	"bufio"
+	"bytes"
+	"context"
+	"crypto/tls"
+	"errors"
+	"fmt"
+	"io"
+	"log"
+	"math"
+	"net"
+	"net/http"
+	"net/textproto"
+	"net/url"
+	"os"
+	"reflect"
+	"runtime"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"golang.org/x/net/http/httpguts"
+	"golang.org/x/net/http2/hpack"
+)
+
+const (
+	prefaceTimeout         = 10 * time.Second
+	firstSettingsTimeout   = 2 * time.Second // should be in-flight with preface anyway
+	handlerChunkWriteSize  = 4 << 10
+	defaultMaxStreams      = 250 // TODO: make this 100 as the GFE seems to?
+	maxQueuedControlFrames = 10000
+)
+
+var (
+	errClientDisconnected = errors.New("client disconnected")
+	errClosedBody         = errors.New("body closed by handler")
+	errHandlerComplete    = errors.New("http2: request body closed due to handler exiting")
+	errStreamClosed       = errors.New("http2: stream closed")
+)
+
+var responseWriterStatePool = sync.Pool{
+	New: func() interface{} {
+		rws := &responseWriterState{}
+		rws.bw = bufio.NewWriterSize(chunkWriter{rws}, handlerChunkWriteSize)
+		return rws
+	},
+}
+
+// Test hooks.
+var (
+	testHookOnConn        func()
+	testHookGetServerConn func(*serverConn)
+	testHookOnPanicMu     *sync.Mutex // nil except in tests
+	testHookOnPanic       func(sc *serverConn, panicVal interface{}) (rePanic bool)
+)
+
+// Server is an HTTP/2 server.
+type Server struct {
+	// MaxHandlers limits the number of http.Handler ServeHTTP goroutines
+	// which may run at a time over all connections.
+	// Negative or zero no limit.
+	// TODO: implement
+	MaxHandlers int
+
+	// MaxConcurrentStreams optionally specifies the number of
+	// concurrent streams that each client may have open at a
+	// time. This is unrelated to the number of http.Handler goroutines
+	// which may be active globally, which is MaxHandlers.
+	// If zero, MaxConcurrentStreams defaults to at least 100, per
+	// the HTTP/2 spec's recommendations.
+	MaxConcurrentStreams uint32
+
+	// MaxReadFrameSize optionally specifies the largest frame
+	// this server is willing to read. A valid value is between
+	// 16k and 16M, inclusive. If zero or otherwise invalid, a
+	// default value is used.
+	MaxReadFrameSize uint32
+
+	// PermitProhibitedCipherSuites, if true, permits the use of
+	// cipher suites prohibited by the HTTP/2 spec.
+	PermitProhibitedCipherSuites bool
+
+	// IdleTimeout specifies how long until idle clients should be
+	// closed with a GOAWAY frame. PING frames are not considered
+	// activity for the purposes of IdleTimeout.
+	IdleTimeout time.Duration
+
+	// MaxUploadBufferPerConnection is the size of the initial flow
+	// control window for each connections. The HTTP/2 spec does not
+	// allow this to be smaller than 65535 or larger than 2^32-1.
+	// If the value is outside this range, a default value will be
+	// used instead.
+	MaxUploadBufferPerConnection int32
+
+	// MaxUploadBufferPerStream is the size of the initial flow control
+	// window for each stream. The HTTP/2 spec does not allow this to
+	// be larger than 2^32-1. If the value is zero or larger than the
+	// maximum, a default value will be used instead.
+	MaxUploadBufferPerStream int32
+
+	// NewWriteScheduler constructs a write scheduler for a connection.
+	// If nil, a default scheduler is chosen.
+	NewWriteScheduler func() WriteScheduler
+
+	// Internal state. This is a pointer (rather than embedded directly)
+	// so that we don't embed a Mutex in this struct, which will make the
+	// struct non-copyable, which might break some callers.
+	state *serverInternalState
+}
+
+func (s *Server) initialConnRecvWindowSize() int32 {
+	if s.MaxUploadBufferPerConnection > initialWindowSize {
+		return s.MaxUploadBufferPerConnection
+	}
+	return 1 << 20
+}
+
+func (s *Server) initialStreamRecvWindowSize() int32 {
+	if s.MaxUploadBufferPerStream > 0 {
+		return s.MaxUploadBufferPerStream
+	}
+	return 1 << 20
+}
+
+func (s *Server) maxReadFrameSize() uint32 {
+	if v := s.MaxReadFrameSize; v >= minMaxFrameSize && v <= maxFrameSize {
+		return v
+	}
+	return defaultMaxReadFrameSize
+}
+
+func (s *Server) maxConcurrentStreams() uint32 {
+	if v := s.MaxConcurrentStreams; v > 0 {
+		return v
+	}
+	return defaultMaxStreams
+}
+
+// maxQueuedControlFrames is the maximum number of control frames like
+// SETTINGS, PING and RST_STREAM that will be queued for writing before
+// the connection is closed to prevent memory exhaustion attacks.
+func (s *Server) maxQueuedControlFrames() int {
+	// TODO: if anybody asks, add a Server field, and remember to define the
+	// behavior of negative values.
+	return maxQueuedControlFrames
+}
+
+type serverInternalState struct {
+	mu          sync.Mutex
+	activeConns map[*serverConn]struct{}
+}
+
+func (s *serverInternalState) registerConn(sc *serverConn) {
+	if s == nil {
+		return // if the Server was used without calling ConfigureServer
+	}
+	s.mu.Lock()
+	s.activeConns[sc] = struct{}{}
+	s.mu.Unlock()
+}
+
+func (s *serverInternalState) unregisterConn(sc *serverConn) {
+	if s == nil {
+		return // if the Server was used without calling ConfigureServer
+	}
+	s.mu.Lock()
+	delete(s.activeConns, sc)
+	s.mu.Unlock()
+}
+
+func (s *serverInternalState) startGracefulShutdown() {
+	if s == nil {
+		return // if the Server was used without calling ConfigureServer
+	}
+	s.mu.Lock()
+	for sc := range s.activeConns {
+		sc.startGracefulShutdown()
+	}
+	s.mu.Unlock()
+}
+
+// ConfigureServer adds HTTP/2 support to a net/http Server.
+//
+// The configuration conf may be nil.
+//
+// ConfigureServer must be called before s begins serving.
+func ConfigureServer(s *http.Server, conf *Server) error {
+	if s == nil {
+		panic("nil *http.Server")
+	}
+	if conf == nil {
+		conf = new(Server)
+	}
+	conf.state = &serverInternalState{activeConns: make(map[*serverConn]struct{})}
+	if h1, h2 := s, conf; h2.IdleTimeout == 0 {
+		if h1.IdleTimeout != 0 {
+			h2.IdleTimeout = h1.IdleTimeout
+		} else {
+			h2.IdleTimeout = h1.ReadTimeout
+		}
+	}
+	s.RegisterOnShutdown(conf.state.startGracefulShutdown)
+
+	if s.TLSConfig == nil {
+		s.TLSConfig = new(tls.Config)
+	} else if s.TLSConfig.CipherSuites != nil {
+		// If they already provided a CipherSuite list, return
+		// an error if it has a bad order or is missing
+		// ECDHE_RSA_WITH_AES_128_GCM_SHA256 or ECDHE_ECDSA_WITH_AES_128_GCM_SHA256.
+		haveRequired := false
+		sawBad := false
+		for i, cs := range s.TLSConfig.CipherSuites {
+			switch cs {
+			case tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
+				// Alternative MTI cipher to not discourage ECDSA-only servers.
+				// See http://golang.org/cl/30721 for further information.
+				tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256:
+				haveRequired = true
+			}
+			if isBadCipher(cs) {
+				sawBad = true
+			} else if sawBad {
+				return fmt.Errorf("http2: TLSConfig.CipherSuites index %d contains an HTTP/2-approved cipher suite (%#04x), but it comes after unapproved cipher suites. With this configuration, clients that don't support previous, approved cipher suites may be given an unapproved one and reject the connection.", i, cs)
+			}
+		}
+		if !haveRequired {
+			return fmt.Errorf("http2: TLSConfig.CipherSuites is missing an HTTP/2-required AES_128_GCM_SHA256 cipher (need at least one of TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 or TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256).")
+		}
+	}
+
+	// Note: not setting MinVersion to tls.VersionTLS12,
+	// as we don't want to interfere with HTTP/1.1 traffic
+	// on the user's server. We enforce TLS 1.2 later once
+	// we accept a connection. Ideally this should be done
+	// during next-proto selection, but using TLS <1.2 with
+	// HTTP/2 is still the client's bug.
+
+	s.TLSConfig.PreferServerCipherSuites = true
+
+	haveNPN := false
+	for _, p := range s.TLSConfig.NextProtos {
+		if p == NextProtoTLS {
+			haveNPN = true
+			break
+		}
+	}
+	if !haveNPN {
+		s.TLSConfig.NextProtos = append(s.TLSConfig.NextProtos, NextProtoTLS)
+	}
+
+	if s.TLSNextProto == nil {
+		s.TLSNextProto = map[string]func(*http.Server, *tls.Conn, http.Handler){}
+	}
+	protoHandler := func(hs *http.Server, c *tls.Conn, h http.Handler) {
+		if testHookOnConn != nil {
+			testHookOnConn()
+		}
+		// The TLSNextProto interface predates contexts, so
+		// the net/http package passes down its per-connection
+		// base context via an exported but unadvertised
+		// method on the Handler. This is for internal
+		// net/http<=>http2 use only.
+		var ctx context.Context
+		type baseContexter interface {
+			BaseContext() context.Context
+		}
+		if bc, ok := h.(baseContexter); ok {
+			ctx = bc.BaseContext()
+		}
+		conf.ServeConn(c, &ServeConnOpts{
+			Context:    ctx,
+			Handler:    h,
+			BaseConfig: hs,
+		})
+	}
+	s.TLSNextProto[NextProtoTLS] = protoHandler
+	return nil
+}
+
+// ServeConnOpts are options for the Server.ServeConn method.
+type ServeConnOpts struct {
+	// Context is the base context to use.
+	// If nil, context.Background is used.
+	Context context.Context
+
+	// BaseConfig optionally sets the base configuration
+	// for values. If nil, defaults are used.
+	BaseConfig *http.Server
+
+	// Handler specifies which handler to use for processing
+	// requests. If nil, BaseConfig.Handler is used. If BaseConfig
+	// or BaseConfig.Handler is nil, http.DefaultServeMux is used.
+	Handler http.Handler
+}
+
+func (o *ServeConnOpts) context() context.Context {
+	if o != nil && o.Context != nil {
+		return o.Context
+	}
+	return context.Background()
+}
+
+func (o *ServeConnOpts) baseConfig() *http.Server {
+	if o != nil && o.BaseConfig != nil {
+		return o.BaseConfig
+	}
+	return new(http.Server)
+}
+
+func (o *ServeConnOpts) handler() http.Handler {
+	if o != nil {
+		if o.Handler != nil {
+			return o.Handler
+		}
+		if o.BaseConfig != nil && o.BaseConfig.Handler != nil {
+			return o.BaseConfig.Handler
+		}
+	}
+	return http.DefaultServeMux
+}
+
+// ServeConn serves HTTP/2 requests on the provided connection and
+// blocks until the connection is no longer readable.
+//
+// ServeConn starts speaking HTTP/2 assuming that c has not had any
+// reads or writes. It writes its initial settings frame and expects
+// to be able to read the preface and settings frame from the
+// client. If c has a ConnectionState method like a *tls.Conn, the
+// ConnectionState is used to verify the TLS ciphersuite and to set
+// the Request.TLS field in Handlers.
+//
+// ServeConn does not support h2c by itself. Any h2c support must be
+// implemented in terms of providing a suitably-behaving net.Conn.
+//
+// The opts parameter is optional. If nil, default values are used.
+func (s *Server) ServeConn(c net.Conn, opts *ServeConnOpts) {
+	baseCtx, cancel := serverConnBaseContext(c, opts)
+	defer cancel()
+
+	sc := &serverConn{
+		srv:                         s,
+		hs:                          opts.baseConfig(),
+		conn:                        c,
+		baseCtx:                     baseCtx,
+		remoteAddrStr:               c.RemoteAddr().String(),
+		bw:                          newBufferedWriter(c),
+		handler:                     opts.handler(),
+		streams:                     make(map[uint32]*stream),
+		readFrameCh:                 make(chan readFrameResult),
+		wantWriteFrameCh:            make(chan FrameWriteRequest, 8),
+		serveMsgCh:                  make(chan interface{}, 8),
+		wroteFrameCh:                make(chan frameWriteResult, 1), // buffered; one send in writeFrameAsync
+		bodyReadCh:                  make(chan bodyReadMsg),         // buffering doesn't matter either way
+		doneServing:                 make(chan struct{}),
+		clientMaxStreams:            math.MaxUint32, // Section 6.5.2: "Initially, there is no limit to this value"
+		advMaxStreams:               s.maxConcurrentStreams(),
+		initialStreamSendWindowSize: initialWindowSize,
+		maxFrameSize:                initialMaxFrameSize,
+		headerTableSize:             initialHeaderTableSize,
+		serveG:                      newGoroutineLock(),
+		pushEnabled:                 true,
+	}
+
+	s.state.registerConn(sc)
+	defer s.state.unregisterConn(sc)
+
+	// The net/http package sets the write deadline from the
+	// http.Server.WriteTimeout during the TLS handshake, but then
+	// passes the connection off to us with the deadline already set.
+	// Write deadlines are set per stream in serverConn.newStream.
+	// Disarm the net.Conn write deadline here.
+	if sc.hs.WriteTimeout != 0 {
+		sc.conn.SetWriteDeadline(time.Time{})
+	}
+
+	if s.NewWriteScheduler != nil {
+		sc.writeSched = s.NewWriteScheduler()
+	} else {
+		sc.writeSched = NewRandomWriteScheduler()
+	}
+
+	// These start at the RFC-specified defaults. If there is a higher
+	// configured value for inflow, that will be updated when we send a
+	// WINDOW_UPDATE shortly after sending SETTINGS.
+	sc.flow.add(initialWindowSize)
+	sc.inflow.add(initialWindowSize)
+	sc.hpackEncoder = hpack.NewEncoder(&sc.headerWriteBuf)
+
+	fr := NewFramer(sc.bw, c)
+	fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
+	fr.MaxHeaderListSize = sc.maxHeaderListSize()
+	fr.SetMaxReadFrameSize(s.maxReadFrameSize())
+	sc.framer = fr
+
+	if tc, ok := c.(connectionStater); ok {
+		sc.tlsState = new(tls.ConnectionState)
+		*sc.tlsState = tc.ConnectionState()
+		// 9.2 Use of TLS Features
+		// An implementation of HTTP/2 over TLS MUST use TLS
+		// 1.2 or higher with the restrictions on feature set
+		// and cipher suite described in this section. Due to
+		// implementation limitations, it might not be
+		// possible to fail TLS negotiation. An endpoint MUST
+		// immediately terminate an HTTP/2 connection that
+		// does not meet the TLS requirements described in
+		// this section with a connection error (Section
+		// 5.4.1) of type INADEQUATE_SECURITY.
+		if sc.tlsState.Version < tls.VersionTLS12 {
+			sc.rejectConn(ErrCodeInadequateSecurity, "TLS version too low")
+			return
+		}
+
+		if sc.tlsState.ServerName == "" {
+			// Client must use SNI, but we don't enforce that anymore,
+			// since it was causing problems when connecting to bare IP
+			// addresses during development.
+			//
+			// TODO: optionally enforce? Or enforce at the time we receive
+			// a new request, and verify the ServerName matches the :authority?
+			// But that precludes proxy situations, perhaps.
+			//
+			// So for now, do nothing here again.
+		}
+
+		if !s.PermitProhibitedCipherSuites && isBadCipher(sc.tlsState.CipherSuite) {
+			// "Endpoints MAY choose to generate a connection error
+			// (Section 5.4.1) of type INADEQUATE_SECURITY if one of
+			// the prohibited cipher suites are negotiated."
+			//
+			// We choose that. In my opinion, the spec is weak
+			// here. It also says both parties must support at least
+			// TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 so there's no
+			// excuses here. If we really must, we could allow an
+			// "AllowInsecureWeakCiphers" option on the server later.
+			// Let's see how it plays out first.
+			sc.rejectConn(ErrCodeInadequateSecurity, fmt.Sprintf("Prohibited TLS 1.2 Cipher Suite: %x", sc.tlsState.CipherSuite))
+			return
+		}
+	}
+
+	if hook := testHookGetServerConn; hook != nil {
+		hook(sc)
+	}
+	sc.serve()
+}
+
+func serverConnBaseContext(c net.Conn, opts *ServeConnOpts) (ctx context.Context, cancel func()) {
+	ctx, cancel = context.WithCancel(opts.context())
+	ctx = context.WithValue(ctx, http.LocalAddrContextKey, c.LocalAddr())
+	if hs := opts.baseConfig(); hs != nil {
+		ctx = context.WithValue(ctx, http.ServerContextKey, hs)
+	}
+	return
+}
+
+func (sc *serverConn) rejectConn(err ErrCode, debug string) {
+	sc.vlogf("http2: server rejecting conn: %v, %s", err, debug)
+	// ignoring errors. hanging up anyway.
+	sc.framer.WriteGoAway(0, err, []byte(debug))
+	sc.bw.Flush()
+	sc.conn.Close()
+}
+
+type serverConn struct {
+	// Immutable:
+	srv              *Server
+	hs               *http.Server
+	conn             net.Conn
+	bw               *bufferedWriter // writing to conn
+	handler          http.Handler
+	baseCtx          context.Context
+	framer           *Framer
+	doneServing      chan struct{}          // closed when serverConn.serve ends
+	readFrameCh      chan readFrameResult   // written by serverConn.readFrames
+	wantWriteFrameCh chan FrameWriteRequest // from handlers -> serve
+	wroteFrameCh     chan frameWriteResult  // from writeFrameAsync -> serve, tickles more frame writes
+	bodyReadCh       chan bodyReadMsg       // from handlers -> serve
+	serveMsgCh       chan interface{}       // misc messages & code to send to / run on the serve loop
+	flow             flow                   // conn-wide (not stream-specific) outbound flow control
+	inflow           flow                   // conn-wide inbound flow control
+	tlsState         *tls.ConnectionState   // shared by all handlers, like net/http
+	remoteAddrStr    string
+	writeSched       WriteScheduler
+
+	// Everything following is owned by the serve loop; use serveG.check():
+	serveG                      goroutineLock // used to verify funcs are on serve()
+	pushEnabled                 bool
+	sawFirstSettings            bool // got the initial SETTINGS frame after the preface
+	needToSendSettingsAck       bool
+	unackedSettings             int    // how many SETTINGS have we sent without ACKs?
+	queuedControlFrames         int    // control frames in the writeSched queue
+	clientMaxStreams            uint32 // SETTINGS_MAX_CONCURRENT_STREAMS from client (our PUSH_PROMISE limit)
+	advMaxStreams               uint32 // our SETTINGS_MAX_CONCURRENT_STREAMS advertised the client
+	curClientStreams            uint32 // number of open streams initiated by the client
+	curPushedStreams            uint32 // number of open streams initiated by server push
+	maxClientStreamID           uint32 // max ever seen from client (odd), or 0 if there have been no client requests
+	maxPushPromiseID            uint32 // ID of the last push promise (even), or 0 if there have been no pushes
+	streams                     map[uint32]*stream
+	initialStreamSendWindowSize int32
+	maxFrameSize                int32
+	headerTableSize             uint32
+	peerMaxHeaderListSize       uint32            // zero means unknown (default)
+	canonHeader                 map[string]string // http2-lower-case -> Go-Canonical-Case
+	writingFrame                bool              // started writing a frame (on serve goroutine or separate)
+	writingFrameAsync           bool              // started a frame on its own goroutine but haven't heard back on wroteFrameCh
+	needsFrameFlush             bool              // last frame write wasn't a flush
+	inGoAway                    bool              // we've started to or sent GOAWAY
+	inFrameScheduleLoop         bool              // whether we're in the scheduleFrameWrite loop
+	needToSendGoAway            bool              // we need to schedule a GOAWAY frame write
+	goAwayCode                  ErrCode
+	shutdownTimer               *time.Timer // nil until used
+	idleTimer                   *time.Timer // nil if unused
+
+	// Owned by the writeFrameAsync goroutine:
+	headerWriteBuf bytes.Buffer
+	hpackEncoder   *hpack.Encoder
+
+	// Used by startGracefulShutdown.
+	shutdownOnce sync.Once
+}
+
+func (sc *serverConn) maxHeaderListSize() uint32 {
+	n := sc.hs.MaxHeaderBytes
+	if n <= 0 {
+		n = http.DefaultMaxHeaderBytes
+	}
+	// http2's count is in a slightly different unit and includes 32 bytes per pair.
+	// So, take the net/http.Server value and pad it up a bit, assuming 10 headers.
+	const perFieldOverhead = 32 // per http2 spec
+	const typicalHeaders = 10   // conservative
+	return uint32(n + typicalHeaders*perFieldOverhead)
+}
+
+func (sc *serverConn) curOpenStreams() uint32 {
+	sc.serveG.check()
+	return sc.curClientStreams + sc.curPushedStreams
+}
+
+// stream represents a stream. This is the minimal metadata needed by
+// the serve goroutine. Most of the actual stream state is owned by
+// the http.Handler's goroutine in the responseWriter. Because the
+// responseWriter's responseWriterState is recycled at the end of a
+// handler, this struct intentionally has no pointer to the
+// *responseWriter{,State} itself, as the Handler ending nils out the
+// responseWriter's state field.
+type stream struct {
+	// immutable:
+	sc        *serverConn
+	id        uint32
+	body      *pipe       // non-nil if expecting DATA frames
+	cw        closeWaiter // closed wait stream transitions to closed state
+	ctx       context.Context
+	cancelCtx func()
+
+	// owned by serverConn's serve loop:
+	bodyBytes        int64 // body bytes seen so far
+	declBodyBytes    int64 // or -1 if undeclared
+	flow             flow  // limits writing from Handler to client
+	inflow           flow  // what the client is allowed to POST/etc to us
+	state            streamState
+	resetQueued      bool        // RST_STREAM queued for write; set by sc.resetStream
+	gotTrailerHeader bool        // HEADER frame for trailers was seen
+	wroteHeaders     bool        // whether we wrote headers (not status 100)
+	writeDeadline    *time.Timer // nil if unused
+
+	trailer    http.Header // accumulated trailers
+	reqTrailer http.Header // handler's Request.Trailer
+}
+
+func (sc *serverConn) Framer() *Framer  { return sc.framer }
+func (sc *serverConn) CloseConn() error { return sc.conn.Close() }
+func (sc *serverConn) Flush() error     { return sc.bw.Flush() }
+func (sc *serverConn) HeaderEncoder() (*hpack.Encoder, *bytes.Buffer) {
+	return sc.hpackEncoder, &sc.headerWriteBuf
+}
+
+func (sc *serverConn) state(streamID uint32) (streamState, *stream) {
+	sc.serveG.check()
+	// http://tools.ietf.org/html/rfc7540#section-5.1
+	if st, ok := sc.streams[streamID]; ok {
+		return st.state, st
+	}
+	// "The first use of a new stream identifier implicitly closes all
+	// streams in the "idle" state that might have been initiated by
+	// that peer with a lower-valued stream identifier. For example, if
+	// a client sends a HEADERS frame on stream 7 without ever sending a
+	// frame on stream 5, then stream 5 transitions to the "closed"
+	// state when the first frame for stream 7 is sent or received."
+	if streamID%2 == 1 {
+		if streamID <= sc.maxClientStreamID {
+			return stateClosed, nil
+		}
+	} else {
+		if streamID <= sc.maxPushPromiseID {
+			return stateClosed, nil
+		}
+	}
+	return stateIdle, nil
+}
+
+// setConnState calls the net/http ConnState hook for this connection, if configured.
+// Note that the net/http package does StateNew and StateClosed for us.
+// There is currently no plan for StateHijacked or hijacking HTTP/2 connections.
+func (sc *serverConn) setConnState(state http.ConnState) {
+	if sc.hs.ConnState != nil {
+		sc.hs.ConnState(sc.conn, state)
+	}
+}
+
+func (sc *serverConn) vlogf(format string, args ...interface{}) {
+	if VerboseLogs {
+		sc.logf(format, args...)
+	}
+}
+
+func (sc *serverConn) logf(format string, args ...interface{}) {
+	if lg := sc.hs.ErrorLog; lg != nil {
+		lg.Printf(format, args...)
+	} else {
+		log.Printf(format, args...)
+	}
+}
+
+// errno returns v's underlying uintptr, else 0.
+//
+// TODO: remove this helper function once http2 can use build
+// tags. See comment in isClosedConnError.
+func errno(v error) uintptr {
+	if rv := reflect.ValueOf(v); rv.Kind() == reflect.Uintptr {
+		return uintptr(rv.Uint())
+	}
+	return 0
+}
+
+// isClosedConnError reports whether err is an error from use of a closed
+// network connection.
+func isClosedConnError(err error) bool {
+	if err == nil {
+		return false
+	}
+
+	// TODO: remove this string search and be more like the Windows
+	// case below. That might involve modifying the standard library
+	// to return better error types.
+	str := err.Error()
+	if strings.Contains(str, "use of closed network connection") {
+		return true
+	}
+
+	// TODO(bradfitz): x/tools/cmd/bundle doesn't really support
+	// build tags, so I can't make an http2_windows.go file with
+	// Windows-specific stuff. Fix that and move this, once we
+	// have a way to bundle this into std's net/http somehow.
+	if runtime.GOOS == "windows" {
+		if oe, ok := err.(*net.OpError); ok && oe.Op == "read" {
+			if se, ok := oe.Err.(*os.SyscallError); ok && se.Syscall == "wsarecv" {
+				const WSAECONNABORTED = 10053
+				const WSAECONNRESET = 10054
+				if n := errno(se.Err); n == WSAECONNRESET || n == WSAECONNABORTED {
+					return true
+				}
+			}
+		}
+	}
+	return false
+}
+
+func (sc *serverConn) condlogf(err error, format string, args ...interface{}) {
+	if err == nil {
+		return
+	}
+	if err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err) || err == errPrefaceTimeout {
+		// Boring, expected errors.
+		sc.vlogf(format, args...)
+	} else {
+		sc.logf(format, args...)
+	}
+}
+
+func (sc *serverConn) canonicalHeader(v string) string {
+	sc.serveG.check()
+	buildCommonHeaderMapsOnce()
+	cv, ok := commonCanonHeader[v]
+	if ok {
+		return cv
+	}
+	cv, ok = sc.canonHeader[v]
+	if ok {
+		return cv
+	}
+	if sc.canonHeader == nil {
+		sc.canonHeader = make(map[string]string)
+	}
+	cv = http.CanonicalHeaderKey(v)
+	sc.canonHeader[v] = cv
+	return cv
+}
+
+type readFrameResult struct {
+	f   Frame // valid until readMore is called
+	err error
+
+	// readMore should be called once the consumer no longer needs or
+	// retains f. After readMore, f is invalid and more frames can be
+	// read.
+	readMore func()
+}
+
+// readFrames is the loop that reads incoming frames.
+// It takes care to only read one frame at a time, blocking until the
+// consumer is done with the frame.
+// It's run on its own goroutine.
+func (sc *serverConn) readFrames() {
+	gate := make(gate)
+	gateDone := gate.Done
+	for {
+		f, err := sc.framer.ReadFrame()
+		select {
+		case sc.readFrameCh <- readFrameResult{f, err, gateDone}:
+		case <-sc.doneServing:
+			return
+		}
+		select {
+		case <-gate:
+		case <-sc.doneServing:
+			return
+		}
+		if terminalReadFrameError(err) {
+			return
+		}
+	}
+}
+
+// frameWriteResult is the message passed from writeFrameAsync to the serve goroutine.
+type frameWriteResult struct {
+	wr  FrameWriteRequest // what was written (or attempted)
+	err error             // result of the writeFrame call
+}
+
+// writeFrameAsync runs in its own goroutine and writes a single frame
+// and then reports when it's done.
+// At most one goroutine can be running writeFrameAsync at a time per
+// serverConn.
+func (sc *serverConn) writeFrameAsync(wr FrameWriteRequest) {
+	err := wr.write.writeFrame(sc)
+	sc.wroteFrameCh <- frameWriteResult{wr, err}
+}
+
+func (sc *serverConn) closeAllStreamsOnConnClose() {
+	sc.serveG.check()
+	for _, st := range sc.streams {
+		sc.closeStream(st, errClientDisconnected)
+	}
+}
+
+func (sc *serverConn) stopShutdownTimer() {
+	sc.serveG.check()
+	if t := sc.shutdownTimer; t != nil {
+		t.Stop()
+	}
+}
+
+func (sc *serverConn) notePanic() {
+	// Note: this is for serverConn.serve panicking, not http.Handler code.
+	if testHookOnPanicMu != nil {
+		testHookOnPanicMu.Lock()
+		defer testHookOnPanicMu.Unlock()
+	}
+	if testHookOnPanic != nil {
+		if e := recover(); e != nil {
+			if testHookOnPanic(sc, e) {
+				panic(e)
+			}
+		}
+	}
+}
+
+func (sc *serverConn) serve() {
+	sc.serveG.check()
+	defer sc.notePanic()
+	defer sc.conn.Close()
+	defer sc.closeAllStreamsOnConnClose()
+	defer sc.stopShutdownTimer()
+	defer close(sc.doneServing) // unblocks handlers trying to send
+
+	if VerboseLogs {
+		sc.vlogf("http2: server connection from %v on %p", sc.conn.RemoteAddr(), sc.hs)
+	}
+
+	sc.writeFrame(FrameWriteRequest{
+		write: writeSettings{
+			{SettingMaxFrameSize, sc.srv.maxReadFrameSize()},
+			{SettingMaxConcurrentStreams, sc.advMaxStreams},
+			{SettingMaxHeaderListSize, sc.maxHeaderListSize()},
+			{SettingInitialWindowSize, uint32(sc.srv.initialStreamRecvWindowSize())},
+		},
+	})
+	sc.unackedSettings++
+
+	// Each connection starts with intialWindowSize inflow tokens.
+	// If a higher value is configured, we add more tokens.
+	if diff := sc.srv.initialConnRecvWindowSize() - initialWindowSize; diff > 0 {
+		sc.sendWindowUpdate(nil, int(diff))
+	}
+
+	if err := sc.readPreface(); err != nil {
+		sc.condlogf(err, "http2: server: error reading preface from client %v: %v", sc.conn.RemoteAddr(), err)
+		return
+	}
+	// Now that we've got the preface, get us out of the
+	// "StateNew" state. We can't go directly to idle, though.
+	// Active means we read some data and anticipate a request. We'll
+	// do another Active when we get a HEADERS frame.
+	sc.setConnState(http.StateActive)
+	sc.setConnState(http.StateIdle)
+
+	if sc.srv.IdleTimeout != 0 {
+		sc.idleTimer = time.AfterFunc(sc.srv.IdleTimeout, sc.onIdleTimer)
+		defer sc.idleTimer.Stop()
+	}
+
+	go sc.readFrames() // closed by defer sc.conn.Close above
+
+	settingsTimer := time.AfterFunc(firstSettingsTimeout, sc.onSettingsTimer)
+	defer settingsTimer.Stop()
+
+	loopNum := 0
+	for {
+		loopNum++
+		select {
+		case wr := <-sc.wantWriteFrameCh:
+			if se, ok := wr.write.(StreamError); ok {
+				sc.resetStream(se)
+				break
+			}
+			sc.writeFrame(wr)
+		case res := <-sc.wroteFrameCh:
+			sc.wroteFrame(res)
+		case res := <-sc.readFrameCh:
+			if !sc.processFrameFromReader(res) {
+				return
+			}
+			res.readMore()
+			if settingsTimer != nil {
+				settingsTimer.Stop()
+				settingsTimer = nil
+			}
+		case m := <-sc.bodyReadCh:
+			sc.noteBodyRead(m.st, m.n)
+		case msg := <-sc.serveMsgCh:
+			switch v := msg.(type) {
+			case func(int):
+				v(loopNum) // for testing
+			case *serverMessage:
+				switch v {
+				case settingsTimerMsg:
+					sc.logf("timeout waiting for SETTINGS frames from %v", sc.conn.RemoteAddr())
+					return
+				case idleTimerMsg:
+					sc.vlogf("connection is idle")
+					sc.goAway(ErrCodeNo)
+				case shutdownTimerMsg:
+					sc.vlogf("GOAWAY close timer fired; closing conn from %v", sc.conn.RemoteAddr())
+					return
+				case gracefulShutdownMsg:
+					sc.startGracefulShutdownInternal()
+				default:
+					panic("unknown timer")
+				}
+			case *startPushRequest:
+				sc.startPush(v)
+			default:
+				panic(fmt.Sprintf("unexpected type %T", v))
+			}
+		}
+
+		// If the peer is causing us to generate a lot of control frames,
+		// but not reading them from us, assume they are trying to make us
+		// run out of memory.
+		if sc.queuedControlFrames > sc.srv.maxQueuedControlFrames() {
+			sc.vlogf("http2: too many control frames in send queue, closing connection")
+			return
+		}
+
+		// Start the shutdown timer after sending a GOAWAY. When sending GOAWAY
+		// with no error code (graceful shutdown), don't start the timer until
+		// all open streams have been completed.
+		sentGoAway := sc.inGoAway && !sc.needToSendGoAway && !sc.writingFrame
+		gracefulShutdownComplete := sc.goAwayCode == ErrCodeNo && sc.curOpenStreams() == 0
+		if sentGoAway && sc.shutdownTimer == nil && (sc.goAwayCode != ErrCodeNo || gracefulShutdownComplete) {
+			sc.shutDownIn(goAwayTimeout)
+		}
+	}
+}
+
+func (sc *serverConn) awaitGracefulShutdown(sharedCh <-chan struct{}, privateCh chan struct{}) {
+	select {
+	case <-sc.doneServing:
+	case <-sharedCh:
+		close(privateCh)
+	}
+}
+
+type serverMessage int
+
+// Message values sent to serveMsgCh.
+var (
+	settingsTimerMsg    = new(serverMessage)
+	idleTimerMsg        = new(serverMessage)
+	shutdownTimerMsg    = new(serverMessage)
+	gracefulShutdownMsg = new(serverMessage)
+)
+
+func (sc *serverConn) onSettingsTimer() { sc.sendServeMsg(settingsTimerMsg) }
+func (sc *serverConn) onIdleTimer()     { sc.sendServeMsg(idleTimerMsg) }
+func (sc *serverConn) onShutdownTimer() { sc.sendServeMsg(shutdownTimerMsg) }
+
+func (sc *serverConn) sendServeMsg(msg interface{}) {
+	sc.serveG.checkNotOn() // NOT
+	select {
+	case sc.serveMsgCh <- msg:
+	case <-sc.doneServing:
+	}
+}
+
+var errPrefaceTimeout = errors.New("timeout waiting for client preface")
+
+// readPreface reads the ClientPreface greeting from the peer or
+// returns errPrefaceTimeout on timeout, or an error if the greeting
+// is invalid.
+func (sc *serverConn) readPreface() error {
+	errc := make(chan error, 1)
+	go func() {
+		// Read the client preface
+		buf := make([]byte, len(ClientPreface))
+		if _, err := io.ReadFull(sc.conn, buf); err != nil {
+			errc <- err
+		} else if !bytes.Equal(buf, clientPreface) {
+			errc <- fmt.Errorf("bogus greeting %q", buf)
+		} else {
+			errc <- nil
+		}
+	}()
+	timer := time.NewTimer(prefaceTimeout) // TODO: configurable on *Server?
+	defer timer.Stop()
+	select {
+	case <-timer.C:
+		return errPrefaceTimeout
+	case err := <-errc:
+		if err == nil {
+			if VerboseLogs {
+				sc.vlogf("http2: server: client %v said hello", sc.conn.RemoteAddr())
+			}
+		}
+		return err
+	}
+}
+
+var errChanPool = sync.Pool{
+	New: func() interface{} { return make(chan error, 1) },
+}
+
+var writeDataPool = sync.Pool{
+	New: func() interface{} { return new(writeData) },
+}
+
+// writeDataFromHandler writes DATA response frames from a handler on
+// the given stream.
+func (sc *serverConn) writeDataFromHandler(stream *stream, data []byte, endStream bool) error {
+	ch := errChanPool.Get().(chan error)
+	writeArg := writeDataPool.Get().(*writeData)
+	*writeArg = writeData{stream.id, data, endStream}
+	err := sc.writeFrameFromHandler(FrameWriteRequest{
+		write:  writeArg,
+		stream: stream,
+		done:   ch,
+	})
+	if err != nil {
+		return err
+	}
+	var frameWriteDone bool // the frame write is done (successfully or not)
+	select {
+	case err = <-ch:
+		frameWriteDone = true
+	case <-sc.doneServing:
+		return errClientDisconnected
+	case <-stream.cw:
+		// If both ch and stream.cw were ready (as might
+		// happen on the final Write after an http.Handler
+		// ends), prefer the write result. Otherwise this
+		// might just be us successfully closing the stream.
+		// The writeFrameAsync and serve goroutines guarantee
+		// that the ch send will happen before the stream.cw
+		// close.
+		select {
+		case err = <-ch:
+			frameWriteDone = true
+		default:
+			return errStreamClosed
+		}
+	}
+	errChanPool.Put(ch)
+	if frameWriteDone {
+		writeDataPool.Put(writeArg)
+	}
+	return err
+}
+
+// writeFrameFromHandler sends wr to sc.wantWriteFrameCh, but aborts
+// if the connection has gone away.
+//
+// This must not be run from the serve goroutine itself, else it might
+// deadlock writing to sc.wantWriteFrameCh (which is only mildly
+// buffered and is read by serve itself). If you're on the serve
+// goroutine, call writeFrame instead.
+func (sc *serverConn) writeFrameFromHandler(wr FrameWriteRequest) error {
+	sc.serveG.checkNotOn() // NOT
+	select {
+	case sc.wantWriteFrameCh <- wr:
+		return nil
+	case <-sc.doneServing:
+		// Serve loop is gone.
+		// Client has closed their connection to the server.
+		return errClientDisconnected
+	}
+}
+
+// writeFrame schedules a frame to write and sends it if there's nothing
+// already being written.
+//
+// There is no pushback here (the serve goroutine never blocks). It's
+// the http.Handlers that block, waiting for their previous frames to
+// make it onto the wire
+//
+// If you're not on the serve goroutine, use writeFrameFromHandler instead.
+func (sc *serverConn) writeFrame(wr FrameWriteRequest) {
+	sc.serveG.check()
+
+	// If true, wr will not be written and wr.done will not be signaled.
+	var ignoreWrite bool
+
+	// We are not allowed to write frames on closed streams. RFC 7540 Section
+	// 5.1.1 says: "An endpoint MUST NOT send frames other than PRIORITY on
+	// a closed stream." Our server never sends PRIORITY, so that exception
+	// does not apply.
+	//
+	// The serverConn might close an open stream while the stream's handler
+	// is still running. For example, the server might close a stream when it
+	// receives bad data from the client. If this happens, the handler might
+	// attempt to write a frame after the stream has been closed (since the
+	// handler hasn't yet been notified of the close). In this case, we simply
+	// ignore the frame. The handler will notice that the stream is closed when
+	// it waits for the frame to be written.
+	//
+	// As an exception to this rule, we allow sending RST_STREAM after close.
+	// This allows us to immediately reject new streams without tracking any
+	// state for those streams (except for the queued RST_STREAM frame). This
+	// may result in duplicate RST_STREAMs in some cases, but the client should
+	// ignore those.
+	if wr.StreamID() != 0 {
+		_, isReset := wr.write.(StreamError)
+		if state, _ := sc.state(wr.StreamID()); state == stateClosed && !isReset {
+			ignoreWrite = true
+		}
+	}
+
+	// Don't send a 100-continue response if we've already sent headers.
+	// See golang.org/issue/14030.
+	switch wr.write.(type) {
+	case *writeResHeaders:
+		wr.stream.wroteHeaders = true
+	case write100ContinueHeadersFrame:
+		if wr.stream.wroteHeaders {
+			// We do not need to notify wr.done because this frame is
+			// never written with wr.done != nil.
+			if wr.done != nil {
+				panic("wr.done != nil for write100ContinueHeadersFrame")
+			}
+			ignoreWrite = true
+		}
+	}
+
+	if !ignoreWrite {
+		if wr.isControl() {
+			sc.queuedControlFrames++
+			// For extra safety, detect wraparounds, which should not happen,
+			// and pull the plug.
+			if sc.queuedControlFrames < 0 {
+				sc.conn.Close()
+			}
+		}
+		sc.writeSched.Push(wr)
+	}
+	sc.scheduleFrameWrite()
+}
+
+// startFrameWrite starts a goroutine to write wr (in a separate
+// goroutine since that might block on the network), and updates the
+// serve goroutine's state about the world, updated from info in wr.
+func (sc *serverConn) startFrameWrite(wr FrameWriteRequest) {
+	sc.serveG.check()
+	if sc.writingFrame {
+		panic("internal error: can only be writing one frame at a time")
+	}
+
+	st := wr.stream
+	if st != nil {
+		switch st.state {
+		case stateHalfClosedLocal:
+			switch wr.write.(type) {
+			case StreamError, handlerPanicRST, writeWindowUpdate:
+				// RFC 7540 Section 5.1 allows sending RST_STREAM, PRIORITY, and WINDOW_UPDATE
+				// in this state. (We never send PRIORITY from the server, so that is not checked.)
+			default:
+				panic(fmt.Sprintf("internal error: attempt to send frame on a half-closed-local stream: %v", wr))
+			}
+		case stateClosed:
+			panic(fmt.Sprintf("internal error: attempt to send frame on a closed stream: %v", wr))
+		}
+	}
+	if wpp, ok := wr.write.(*writePushPromise); ok {
+		var err error
+		wpp.promisedID, err = wpp.allocatePromisedID()
+		if err != nil {
+			sc.writingFrameAsync = false
+			wr.replyToWriter(err)
+			return
+		}
+	}
+
+	sc.writingFrame = true
+	sc.needsFrameFlush = true
+	if wr.write.staysWithinBuffer(sc.bw.Available()) {
+		sc.writingFrameAsync = false
+		err := wr.write.writeFrame(sc)
+		sc.wroteFrame(frameWriteResult{wr, err})
+	} else {
+		sc.writingFrameAsync = true
+		go sc.writeFrameAsync(wr)
+	}
+}
+
+// errHandlerPanicked is the error given to any callers blocked in a read from
+// Request.Body when the main goroutine panics. Since most handlers read in the
+// main ServeHTTP goroutine, this will show up rarely.
+var errHandlerPanicked = errors.New("http2: handler panicked")
+
+// wroteFrame is called on the serve goroutine with the result of
+// whatever happened on writeFrameAsync.
+func (sc *serverConn) wroteFrame(res frameWriteResult) {
+	sc.serveG.check()
+	if !sc.writingFrame {
+		panic("internal error: expected to be already writing a frame")
+	}
+	sc.writingFrame = false
+	sc.writingFrameAsync = false
+
+	wr := res.wr
+
+	if writeEndsStream(wr.write) {
+		st := wr.stream
+		if st == nil {
+			panic("internal error: expecting non-nil stream")
+		}
+		switch st.state {
+		case stateOpen:
+			// Here we would go to stateHalfClosedLocal in
+			// theory, but since our handler is done and
+			// the net/http package provides no mechanism
+			// for closing a ResponseWriter while still
+			// reading data (see possible TODO at top of
+			// this file), we go into closed state here
+			// anyway, after telling the peer we're
+			// hanging up on them. We'll transition to
+			// stateClosed after the RST_STREAM frame is
+			// written.
+			st.state = stateHalfClosedLocal
+			// Section 8.1: a server MAY request that the client abort
+			// transmission of a request without error by sending a
+			// RST_STREAM with an error code of NO_ERROR after sending
+			// a complete response.
+			sc.resetStream(streamError(st.id, ErrCodeNo))
+		case stateHalfClosedRemote:
+			sc.closeStream(st, errHandlerComplete)
+		}
+	} else {
+		switch v := wr.write.(type) {
+		case StreamError:
+			// st may be unknown if the RST_STREAM was generated to reject bad input.
+			if st, ok := sc.streams[v.StreamID]; ok {
+				sc.closeStream(st, v)
+			}
+		case handlerPanicRST:
+			sc.closeStream(wr.stream, errHandlerPanicked)
+		}
+	}
+
+	// Reply (if requested) to unblock the ServeHTTP goroutine.
+	wr.replyToWriter(res.err)
+
+	sc.scheduleFrameWrite()
+}
+
+// scheduleFrameWrite tickles the frame writing scheduler.
+//
+// If a frame is already being written, nothing happens. This will be called again
+// when the frame is done being written.
+//
+// If a frame isn't being written and we need to send one, the best frame
+// to send is selected by writeSched.
+//
+// If a frame isn't being written and there's nothing else to send, we
+// flush the write buffer.
+func (sc *serverConn) scheduleFrameWrite() {
+	sc.serveG.check()
+	if sc.writingFrame || sc.inFrameScheduleLoop {
+		return
+	}
+	sc.inFrameScheduleLoop = true
+	for !sc.writingFrameAsync {
+		if sc.needToSendGoAway {
+			sc.needToSendGoAway = false
+			sc.startFrameWrite(FrameWriteRequest{
+				write: &writeGoAway{
+					maxStreamID: sc.maxClientStreamID,
+					code:        sc.goAwayCode,
+				},
+			})
+			continue
+		}
+		if sc.needToSendSettingsAck {
+			sc.needToSendSettingsAck = false
+			sc.startFrameWrite(FrameWriteRequest{write: writeSettingsAck{}})
+			continue
+		}
+		if !sc.inGoAway || sc.goAwayCode == ErrCodeNo {
+			if wr, ok := sc.writeSched.Pop(); ok {
+				if wr.isControl() {
+					sc.queuedControlFrames--
+				}
+				sc.startFrameWrite(wr)
+				continue
+			}
+		}
+		if sc.needsFrameFlush {
+			sc.startFrameWrite(FrameWriteRequest{write: flushFrameWriter{}})
+			sc.needsFrameFlush = false // after startFrameWrite, since it sets this true
+			continue
+		}
+		break
+	}
+	sc.inFrameScheduleLoop = false
+}
+
+// startGracefulShutdown gracefully shuts down a connection. This
+// sends GOAWAY with ErrCodeNo to tell the client we're gracefully
+// shutting down. The connection isn't closed until all current
+// streams are done.
+//
+// startGracefulShutdown returns immediately; it does not wait until
+// the connection has shut down.
+func (sc *serverConn) startGracefulShutdown() {
+	sc.serveG.checkNotOn() // NOT
+	sc.shutdownOnce.Do(func() { sc.sendServeMsg(gracefulShutdownMsg) })
+}
+
+// After sending GOAWAY, the connection will close after goAwayTimeout.
+// If we close the connection immediately after sending GOAWAY, there may
+// be unsent data in our kernel receive buffer, which will cause the kernel
+// to send a TCP RST on close() instead of a FIN. This RST will abort the
+// connection immediately, whether or not the client had received the GOAWAY.
+//
+// Ideally we should delay for at least 1 RTT + epsilon so the client has
+// a chance to read the GOAWAY and stop sending messages. Measuring RTT
+// is hard, so we approximate with 1 second. See golang.org/issue/18701.
+//
+// This is a var so it can be shorter in tests, where all requests uses the
+// loopback interface making the expected RTT very small.
+//
+// TODO: configurable?
+var goAwayTimeout = 1 * time.Second
+
+func (sc *serverConn) startGracefulShutdownInternal() {
+	sc.goAway(ErrCodeNo)
+}
+
+func (sc *serverConn) goAway(code ErrCode) {
+	sc.serveG.check()
+	if sc.inGoAway {
+		return
+	}
+	sc.inGoAway = true
+	sc.needToSendGoAway = true
+	sc.goAwayCode = code
+	sc.scheduleFrameWrite()
+}
+
+func (sc *serverConn) shutDownIn(d time.Duration) {
+	sc.serveG.check()
+	sc.shutdownTimer = time.AfterFunc(d, sc.onShutdownTimer)
+}
+
+func (sc *serverConn) resetStream(se StreamError) {
+	sc.serveG.check()
+	sc.writeFrame(FrameWriteRequest{write: se})
+	if st, ok := sc.streams[se.StreamID]; ok {
+		st.resetQueued = true
+	}
+}
+
+// processFrameFromReader processes the serve loop's read from readFrameCh from the
+// frame-reading goroutine.
+// processFrameFromReader returns whether the connection should be kept open.
+func (sc *serverConn) processFrameFromReader(res readFrameResult) bool {
+	sc.serveG.check()
+	err := res.err
+	if err != nil {
+		if err == ErrFrameTooLarge {
+			sc.goAway(ErrCodeFrameSize)
+			return true // goAway will close the loop
+		}
+		clientGone := err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err)
+		if clientGone {
+			// TODO: could we also get into this state if
+			// the peer does a half close
+			// (e.g. CloseWrite) because they're done
+			// sending frames but they're still wanting
+			// our open replies?  Investigate.
+			// TODO: add CloseWrite to crypto/tls.Conn first
+			// so we have a way to test this? I suppose
+			// just for testing we could have a non-TLS mode.
+			return false
+		}
+	} else {
+		f := res.f
+		if VerboseLogs {
+			sc.vlogf("http2: server read frame %v", summarizeFrame(f))
+		}
+		err = sc.processFrame(f)
+		if err == nil {
+			return true
+		}
+	}
+
+	switch ev := err.(type) {
+	case StreamError:
+		sc.resetStream(ev)
+		return true
+	case goAwayFlowError:
+		sc.goAway(ErrCodeFlowControl)
+		return true
+	case ConnectionError:
+		sc.logf("http2: server connection error from %v: %v", sc.conn.RemoteAddr(), ev)
+		sc.goAway(ErrCode(ev))
+		return true // goAway will handle shutdown
+	default:
+		if res.err != nil {
+			sc.vlogf("http2: server closing client connection; error reading frame from client %s: %v", sc.conn.RemoteAddr(), err)
+		} else {
+			sc.logf("http2: server closing client connection: %v", err)
+		}
+		return false
+	}
+}
+
+func (sc *serverConn) processFrame(f Frame) error {
+	sc.serveG.check()
+
+	// First frame received must be SETTINGS.
+	if !sc.sawFirstSettings {
+		if _, ok := f.(*SettingsFrame); !ok {
+			return ConnectionError(ErrCodeProtocol)
+		}
+		sc.sawFirstSettings = true
+	}
+
+	switch f := f.(type) {
+	case *SettingsFrame:
+		return sc.processSettings(f)
+	case *MetaHeadersFrame:
+		return sc.processHeaders(f)
+	case *WindowUpdateFrame:
+		return sc.processWindowUpdate(f)
+	case *PingFrame:
+		return sc.processPing(f)
+	case *DataFrame:
+		return sc.processData(f)
+	case *RSTStreamFrame:
+		return sc.processResetStream(f)
+	case *PriorityFrame:
+		return sc.processPriority(f)
+	case *GoAwayFrame:
+		return sc.processGoAway(f)
+	case *PushPromiseFrame:
+		// A client cannot push. Thus, servers MUST treat the receipt of a PUSH_PROMISE
+		// frame as a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+		return ConnectionError(ErrCodeProtocol)
+	default:
+		sc.vlogf("http2: server ignoring frame: %v", f.Header())
+		return nil
+	}
+}
+
+func (sc *serverConn) processPing(f *PingFrame) error {
+	sc.serveG.check()
+	if f.IsAck() {
+		// 6.7 PING: " An endpoint MUST NOT respond to PING frames
+		// containing this flag."
+		return nil
+	}
+	if f.StreamID != 0 {
+		// "PING frames are not associated with any individual
+		// stream. If a PING frame is received with a stream
+		// identifier field value other than 0x0, the recipient MUST
+		// respond with a connection error (Section 5.4.1) of type
+		// PROTOCOL_ERROR."
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+		return nil
+	}
+	sc.writeFrame(FrameWriteRequest{write: writePingAck{f}})
+	return nil
+}
+
+func (sc *serverConn) processWindowUpdate(f *WindowUpdateFrame) error {
+	sc.serveG.check()
+	switch {
+	case f.StreamID != 0: // stream-level flow control
+		state, st := sc.state(f.StreamID)
+		if state == stateIdle {
+			// Section 5.1: "Receiving any frame other than HEADERS
+			// or PRIORITY on a stream in this state MUST be
+			// treated as a connection error (Section 5.4.1) of
+			// type PROTOCOL_ERROR."
+			return ConnectionError(ErrCodeProtocol)
+		}
+		if st == nil {
+			// "WINDOW_UPDATE can be sent by a peer that has sent a
+			// frame bearing the END_STREAM flag. This means that a
+			// receiver could receive a WINDOW_UPDATE frame on a "half
+			// closed (remote)" or "closed" stream. A receiver MUST
+			// NOT treat this as an error, see Section 5.1."
+			return nil
+		}
+		if !st.flow.add(int32(f.Increment)) {
+			return streamError(f.StreamID, ErrCodeFlowControl)
+		}
+	default: // connection-level flow control
+		if !sc.flow.add(int32(f.Increment)) {
+			return goAwayFlowError{}
+		}
+	}
+	sc.scheduleFrameWrite()
+	return nil
+}
+
+func (sc *serverConn) processResetStream(f *RSTStreamFrame) error {
+	sc.serveG.check()
+
+	state, st := sc.state(f.StreamID)
+	if state == stateIdle {
+		// 6.4 "RST_STREAM frames MUST NOT be sent for a
+		// stream in the "idle" state. If a RST_STREAM frame
+		// identifying an idle stream is received, the
+		// recipient MUST treat this as a connection error
+		// (Section 5.4.1) of type PROTOCOL_ERROR.
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if st != nil {
+		st.cancelCtx()
+		sc.closeStream(st, streamError(f.StreamID, f.ErrCode))
+	}
+	return nil
+}
+
+func (sc *serverConn) closeStream(st *stream, err error) {
+	sc.serveG.check()
+	if st.state == stateIdle || st.state == stateClosed {
+		panic(fmt.Sprintf("invariant; can't close stream in state %v", st.state))
+	}
+	st.state = stateClosed
+	if st.writeDeadline != nil {
+		st.writeDeadline.Stop()
+	}
+	if st.isPushed() {
+		sc.curPushedStreams--
+	} else {
+		sc.curClientStreams--
+	}
+	delete(sc.streams, st.id)
+	if len(sc.streams) == 0 {
+		sc.setConnState(http.StateIdle)
+		if sc.srv.IdleTimeout != 0 {
+			sc.idleTimer.Reset(sc.srv.IdleTimeout)
+		}
+		if h1ServerKeepAlivesDisabled(sc.hs) {
+			sc.startGracefulShutdownInternal()
+		}
+	}
+	if p := st.body; p != nil {
+		// Return any buffered unread bytes worth of conn-level flow control.
+		// See golang.org/issue/16481
+		sc.sendWindowUpdate(nil, p.Len())
+
+		p.CloseWithError(err)
+	}
+	st.cw.Close() // signals Handler's CloseNotifier, unblocks writes, etc
+	sc.writeSched.CloseStream(st.id)
+}
+
+func (sc *serverConn) processSettings(f *SettingsFrame) error {
+	sc.serveG.check()
+	if f.IsAck() {
+		sc.unackedSettings--
+		if sc.unackedSettings < 0 {
+			// Why is the peer ACKing settings we never sent?
+			// The spec doesn't mention this case, but
+			// hang up on them anyway.
+			return ConnectionError(ErrCodeProtocol)
+		}
+		return nil
+	}
+	if f.NumSettings() > 100 || f.HasDuplicates() {
+		// This isn't actually in the spec, but hang up on
+		// suspiciously large settings frames or those with
+		// duplicate entries.
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if err := f.ForeachSetting(sc.processSetting); err != nil {
+		return err
+	}
+	// TODO: judging by RFC 7540, Section 6.5.3 each SETTINGS frame should be
+	// acknowledged individually, even if multiple are received before the ACK.
+	sc.needToSendSettingsAck = true
+	sc.scheduleFrameWrite()
+	return nil
+}
+
+func (sc *serverConn) processSetting(s Setting) error {
+	sc.serveG.check()
+	if err := s.Valid(); err != nil {
+		return err
+	}
+	if VerboseLogs {
+		sc.vlogf("http2: server processing setting %v", s)
+	}
+	switch s.ID {
+	case SettingHeaderTableSize:
+		sc.headerTableSize = s.Val
+		sc.hpackEncoder.SetMaxDynamicTableSize(s.Val)
+	case SettingEnablePush:
+		sc.pushEnabled = s.Val != 0
+	case SettingMaxConcurrentStreams:
+		sc.clientMaxStreams = s.Val
+	case SettingInitialWindowSize:
+		return sc.processSettingInitialWindowSize(s.Val)
+	case SettingMaxFrameSize:
+		sc.maxFrameSize = int32(s.Val) // the maximum valid s.Val is < 2^31
+	case SettingMaxHeaderListSize:
+		sc.peerMaxHeaderListSize = s.Val
+	default:
+		// Unknown setting: "An endpoint that receives a SETTINGS
+		// frame with any unknown or unsupported identifier MUST
+		// ignore that setting."
+		if VerboseLogs {
+			sc.vlogf("http2: server ignoring unknown setting %v", s)
+		}
+	}
+	return nil
+}
+
+func (sc *serverConn) processSettingInitialWindowSize(val uint32) error {
+	sc.serveG.check()
+	// Note: val already validated to be within range by
+	// processSetting's Valid call.
+
+	// "A SETTINGS frame can alter the initial flow control window
+	// size for all current streams. When the value of
+	// SETTINGS_INITIAL_WINDOW_SIZE changes, a receiver MUST
+	// adjust the size of all stream flow control windows that it
+	// maintains by the difference between the new value and the
+	// old value."
+	old := sc.initialStreamSendWindowSize
+	sc.initialStreamSendWindowSize = int32(val)
+	growth := int32(val) - old // may be negative
+	for _, st := range sc.streams {
+		if !st.flow.add(growth) {
+			// 6.9.2 Initial Flow Control Window Size
+			// "An endpoint MUST treat a change to
+			// SETTINGS_INITIAL_WINDOW_SIZE that causes any flow
+			// control window to exceed the maximum size as a
+			// connection error (Section 5.4.1) of type
+			// FLOW_CONTROL_ERROR."
+			return ConnectionError(ErrCodeFlowControl)
+		}
+	}
+	return nil
+}
+
+func (sc *serverConn) processData(f *DataFrame) error {
+	sc.serveG.check()
+	if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+		return nil
+	}
+	data := f.Data()
+
+	// "If a DATA frame is received whose stream is not in "open"
+	// or "half closed (local)" state, the recipient MUST respond
+	// with a stream error (Section 5.4.2) of type STREAM_CLOSED."
+	id := f.Header().StreamID
+	state, st := sc.state(id)
+	if id == 0 || state == stateIdle {
+		// Section 5.1: "Receiving any frame other than HEADERS
+		// or PRIORITY on a stream in this state MUST be
+		// treated as a connection error (Section 5.4.1) of
+		// type PROTOCOL_ERROR."
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if st == nil || state != stateOpen || st.gotTrailerHeader || st.resetQueued {
+		// This includes sending a RST_STREAM if the stream is
+		// in stateHalfClosedLocal (which currently means that
+		// the http.Handler returned, so it's done reading &
+		// done writing). Try to stop the client from sending
+		// more DATA.
+
+		// But still enforce their connection-level flow control,
+		// and return any flow control bytes since we're not going
+		// to consume them.
+		if sc.inflow.available() < int32(f.Length) {
+			return streamError(id, ErrCodeFlowControl)
+		}
+		// Deduct the flow control from inflow, since we're
+		// going to immediately add it back in
+		// sendWindowUpdate, which also schedules sending the
+		// frames.
+		sc.inflow.take(int32(f.Length))
+		sc.sendWindowUpdate(nil, int(f.Length)) // conn-level
+
+		if st != nil && st.resetQueued {
+			// Already have a stream error in flight. Don't send another.
+			return nil
+		}
+		return streamError(id, ErrCodeStreamClosed)
+	}
+	if st.body == nil {
+		panic("internal error: should have a body in this state")
+	}
+
+	// Sender sending more than they'd declared?
+	if st.declBodyBytes != -1 && st.bodyBytes+int64(len(data)) > st.declBodyBytes {
+		st.body.CloseWithError(fmt.Errorf("sender tried to send more than declared Content-Length of %d bytes", st.declBodyBytes))
+		// RFC 7540, sec 8.1.2.6: A request or response is also malformed if the
+		// value of a content-length header field does not equal the sum of the
+		// DATA frame payload lengths that form the body.
+		return streamError(id, ErrCodeProtocol)
+	}
+	if f.Length > 0 {
+		// Check whether the client has flow control quota.
+		if st.inflow.available() < int32(f.Length) {
+			return streamError(id, ErrCodeFlowControl)
+		}
+		st.inflow.take(int32(f.Length))
+
+		if len(data) > 0 {
+			wrote, err := st.body.Write(data)
+			if err != nil {
+				return streamError(id, ErrCodeStreamClosed)
+			}
+			if wrote != len(data) {
+				panic("internal error: bad Writer")
+			}
+			st.bodyBytes += int64(len(data))
+		}
+
+		// Return any padded flow control now, since we won't
+		// refund it later on body reads.
+		if pad := int32(f.Length) - int32(len(data)); pad > 0 {
+			sc.sendWindowUpdate32(nil, pad)
+			sc.sendWindowUpdate32(st, pad)
+		}
+	}
+	if f.StreamEnded() {
+		st.endStream()
+	}
+	return nil
+}
+
+func (sc *serverConn) processGoAway(f *GoAwayFrame) error {
+	sc.serveG.check()
+	if f.ErrCode != ErrCodeNo {
+		sc.logf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+	} else {
+		sc.vlogf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+	}
+	sc.startGracefulShutdownInternal()
+	// http://tools.ietf.org/html/rfc7540#section-6.8
+	// We should not create any new streams, which means we should disable push.
+	sc.pushEnabled = false
+	return nil
+}
+
+// isPushed reports whether the stream is server-initiated.
+func (st *stream) isPushed() bool {
+	return st.id%2 == 0
+}
+
+// endStream closes a Request.Body's pipe. It is called when a DATA
+// frame says a request body is over (or after trailers).
+func (st *stream) endStream() {
+	sc := st.sc
+	sc.serveG.check()
+
+	if st.declBodyBytes != -1 && st.declBodyBytes != st.bodyBytes {
+		st.body.CloseWithError(fmt.Errorf("request declared a Content-Length of %d but only wrote %d bytes",
+			st.declBodyBytes, st.bodyBytes))
+	} else {
+		st.body.closeWithErrorAndCode(io.EOF, st.copyTrailersToHandlerRequest)
+		st.body.CloseWithError(io.EOF)
+	}
+	st.state = stateHalfClosedRemote
+}
+
+// copyTrailersToHandlerRequest is run in the Handler's goroutine in
+// its Request.Body.Read just before it gets io.EOF.
+func (st *stream) copyTrailersToHandlerRequest() {
+	for k, vv := range st.trailer {
+		if _, ok := st.reqTrailer[k]; ok {
+			// Only copy it over it was pre-declared.
+			st.reqTrailer[k] = vv
+		}
+	}
+}
+
+// onWriteTimeout is run on its own goroutine (from time.AfterFunc)
+// when the stream's WriteTimeout has fired.
+func (st *stream) onWriteTimeout() {
+	st.sc.writeFrameFromHandler(FrameWriteRequest{write: streamError(st.id, ErrCodeInternal)})
+}
+
+func (sc *serverConn) processHeaders(f *MetaHeadersFrame) error {
+	sc.serveG.check()
+	id := f.StreamID
+	if sc.inGoAway {
+		// Ignore.
+		return nil
+	}
+	// http://tools.ietf.org/html/rfc7540#section-5.1.1
+	// Streams initiated by a client MUST use odd-numbered stream
+	// identifiers. [...] An endpoint that receives an unexpected
+	// stream identifier MUST respond with a connection error
+	// (Section 5.4.1) of type PROTOCOL_ERROR.
+	if id%2 != 1 {
+		return ConnectionError(ErrCodeProtocol)
+	}
+	// A HEADERS frame can be used to create a new stream or
+	// send a trailer for an open one. If we already have a stream
+	// open, let it process its own HEADERS frame (trailers at this
+	// point, if it's valid).
+	if st := sc.streams[f.StreamID]; st != nil {
+		if st.resetQueued {
+			// We're sending RST_STREAM to close the stream, so don't bother
+			// processing this frame.
+			return nil
+		}
+		// RFC 7540, sec 5.1: If an endpoint receives additional frames, other than
+		// WINDOW_UPDATE, PRIORITY, or RST_STREAM, for a stream that is in
+		// this state, it MUST respond with a stream error (Section 5.4.2) of
+		// type STREAM_CLOSED.
+		if st.state == stateHalfClosedRemote {
+			return streamError(id, ErrCodeStreamClosed)
+		}
+		return st.processTrailerHeaders(f)
+	}
+
+	// [...] The identifier of a newly established stream MUST be
+	// numerically greater than all streams that the initiating
+	// endpoint has opened or reserved. [...]  An endpoint that
+	// receives an unexpected stream identifier MUST respond with
+	// a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+	if id <= sc.maxClientStreamID {
+		return ConnectionError(ErrCodeProtocol)
+	}
+	sc.maxClientStreamID = id
+
+	if sc.idleTimer != nil {
+		sc.idleTimer.Stop()
+	}
+
+	// http://tools.ietf.org/html/rfc7540#section-5.1.2
+	// [...] Endpoints MUST NOT exceed the limit set by their peer. An
+	// endpoint that receives a HEADERS frame that causes their
+	// advertised concurrent stream limit to be exceeded MUST treat
+	// this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR
+	// or REFUSED_STREAM.
+	if sc.curClientStreams+1 > sc.advMaxStreams {
+		if sc.unackedSettings == 0 {
+			// They should know better.
+			return streamError(id, ErrCodeProtocol)
+		}
+		// Assume it's a network race, where they just haven't
+		// received our last SETTINGS update. But actually
+		// this can't happen yet, because we don't yet provide
+		// a way for users to adjust server parameters at
+		// runtime.
+		return streamError(id, ErrCodeRefusedStream)
+	}
+
+	initialState := stateOpen
+	if f.StreamEnded() {
+		initialState = stateHalfClosedRemote
+	}
+	st := sc.newStream(id, 0, initialState)
+
+	if f.HasPriority() {
+		if err := checkPriority(f.StreamID, f.Priority); err != nil {
+			return err
+		}
+		sc.writeSched.AdjustStream(st.id, f.Priority)
+	}
+
+	rw, req, err := sc.newWriterAndRequest(st, f)
+	if err != nil {
+		return err
+	}
+	st.reqTrailer = req.Trailer
+	if st.reqTrailer != nil {
+		st.trailer = make(http.Header)
+	}
+	st.body = req.Body.(*requestBody).pipe // may be nil
+	st.declBodyBytes = req.ContentLength
+
+	handler := sc.handler.ServeHTTP
+	if f.Truncated {
+		// Their header list was too long. Send a 431 error.
+		handler = handleHeaderListTooLong
+	} else if err := checkValidHTTP2RequestHeaders(req.Header); err != nil {
+		handler = new400Handler(err)
+	}
+
+	// The net/http package sets the read deadline from the
+	// http.Server.ReadTimeout during the TLS handshake, but then
+	// passes the connection off to us with the deadline already
+	// set. Disarm it here after the request headers are read,
+	// similar to how the http1 server works. Here it's
+	// technically more like the http1 Server's ReadHeaderTimeout
+	// (in Go 1.8), though. That's a more sane option anyway.
+	if sc.hs.ReadTimeout != 0 {
+		sc.conn.SetReadDeadline(time.Time{})
+	}
+
+	go sc.runHandler(rw, req, handler)
+	return nil
+}
+
+func (st *stream) processTrailerHeaders(f *MetaHeadersFrame) error {
+	sc := st.sc
+	sc.serveG.check()
+	if st.gotTrailerHeader {
+		return ConnectionError(ErrCodeProtocol)
+	}
+	st.gotTrailerHeader = true
+	if !f.StreamEnded() {
+		return streamError(st.id, ErrCodeProtocol)
+	}
+
+	if len(f.PseudoFields()) > 0 {
+		return streamError(st.id, ErrCodeProtocol)
+	}
+	if st.trailer != nil {
+		for _, hf := range f.RegularFields() {
+			key := sc.canonicalHeader(hf.Name)
+			if !httpguts.ValidTrailerHeader(key) {
+				// TODO: send more details to the peer somehow. But http2 has
+				// no way to send debug data at a stream level. Discuss with
+				// HTTP folk.
+				return streamError(st.id, ErrCodeProtocol)
+			}
+			st.trailer[key] = append(st.trailer[key], hf.Value)
+		}
+	}
+	st.endStream()
+	return nil
+}
+
+func checkPriority(streamID uint32, p PriorityParam) error {
+	if streamID == p.StreamDep {
+		// Section 5.3.1: "A stream cannot depend on itself. An endpoint MUST treat
+		// this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR."
+		// Section 5.3.3 says that a stream can depend on one of its dependencies,
+		// so it's only self-dependencies that are forbidden.
+		return streamError(streamID, ErrCodeProtocol)
+	}
+	return nil
+}
+
+func (sc *serverConn) processPriority(f *PriorityFrame) error {
+	if sc.inGoAway {
+		return nil
+	}
+	if err := checkPriority(f.StreamID, f.PriorityParam); err != nil {
+		return err
+	}
+	sc.writeSched.AdjustStream(f.StreamID, f.PriorityParam)
+	return nil
+}
+
+func (sc *serverConn) newStream(id, pusherID uint32, state streamState) *stream {
+	sc.serveG.check()
+	if id == 0 {
+		panic("internal error: cannot create stream with id 0")
+	}
+
+	ctx, cancelCtx := context.WithCancel(sc.baseCtx)
+	st := &stream{
+		sc:        sc,
+		id:        id,
+		state:     state,
+		ctx:       ctx,
+		cancelCtx: cancelCtx,
+	}
+	st.cw.Init()
+	st.flow.conn = &sc.flow // link to conn-level counter
+	st.flow.add(sc.initialStreamSendWindowSize)
+	st.inflow.conn = &sc.inflow // link to conn-level counter
+	st.inflow.add(sc.srv.initialStreamRecvWindowSize())
+	if sc.hs.WriteTimeout != 0 {
+		st.writeDeadline = time.AfterFunc(sc.hs.WriteTimeout, st.onWriteTimeout)
+	}
+
+	sc.streams[id] = st
+	sc.writeSched.OpenStream(st.id, OpenStreamOptions{PusherID: pusherID})
+	if st.isPushed() {
+		sc.curPushedStreams++
+	} else {
+		sc.curClientStreams++
+	}
+	if sc.curOpenStreams() == 1 {
+		sc.setConnState(http.StateActive)
+	}
+
+	return st
+}
+
+func (sc *serverConn) newWriterAndRequest(st *stream, f *MetaHeadersFrame) (*responseWriter, *http.Request, error) {
+	sc.serveG.check()
+
+	rp := requestParam{
+		method:    f.PseudoValue("method"),
+		scheme:    f.PseudoValue("scheme"),
+		authority: f.PseudoValue("authority"),
+		path:      f.PseudoValue("path"),
+	}
+
+	isConnect := rp.method == "CONNECT"
+	if isConnect {
+		if rp.path != "" || rp.scheme != "" || rp.authority == "" {
+			return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+		}
+	} else if rp.method == "" || rp.path == "" || (rp.scheme != "https" && rp.scheme != "http") {
+		// See 8.1.2.6 Malformed Requests and Responses:
+		//
+		// Malformed requests or responses that are detected
+		// MUST be treated as a stream error (Section 5.4.2)
+		// of type PROTOCOL_ERROR."
+		//
+		// 8.1.2.3 Request Pseudo-Header Fields
+		// "All HTTP/2 requests MUST include exactly one valid
+		// value for the :method, :scheme, and :path
+		// pseudo-header fields"
+		return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+	}
+
+	bodyOpen := !f.StreamEnded()
+	if rp.method == "HEAD" && bodyOpen {
+		// HEAD requests can't have bodies
+		return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+	}
+
+	rp.header = make(http.Header)
+	for _, hf := range f.RegularFields() {
+		rp.header.Add(sc.canonicalHeader(hf.Name), hf.Value)
+	}
+	if rp.authority == "" {
+		rp.authority = rp.header.Get("Host")
+	}
+
+	rw, req, err := sc.newWriterAndRequestNoBody(st, rp)
+	if err != nil {
+		return nil, nil, err
+	}
+	if bodyOpen {
+		if vv, ok := rp.header["Content-Length"]; ok {
+			req.ContentLength, _ = strconv.ParseInt(vv[0], 10, 64)
+		} else {
+			req.ContentLength = -1
+		}
+		req.Body.(*requestBody).pipe = &pipe{
+			b: &dataBuffer{expected: req.ContentLength},
+		}
+	}
+	return rw, req, nil
+}
+
+type requestParam struct {
+	method                  string
+	scheme, authority, path string
+	header                  http.Header
+}
+
+func (sc *serverConn) newWriterAndRequestNoBody(st *stream, rp requestParam) (*responseWriter, *http.Request, error) {
+	sc.serveG.check()
+
+	var tlsState *tls.ConnectionState // nil if not scheme https
+	if rp.scheme == "https" {
+		tlsState = sc.tlsState
+	}
+
+	needsContinue := rp.header.Get("Expect") == "100-continue"
+	if needsContinue {
+		rp.header.Del("Expect")
+	}
+	// Merge Cookie headers into one "; "-delimited value.
+	if cookies := rp.header["Cookie"]; len(cookies) > 1 {
+		rp.header.Set("Cookie", strings.Join(cookies, "; "))
+	}
+
+	// Setup Trailers
+	var trailer http.Header
+	for _, v := range rp.header["Trailer"] {
+		for _, key := range strings.Split(v, ",") {
+			key = http.CanonicalHeaderKey(strings.TrimSpace(key))
+			switch key {
+			case "Transfer-Encoding", "Trailer", "Content-Length":
+				// Bogus. (copy of http1 rules)
+				// Ignore.
+			default:
+				if trailer == nil {
+					trailer = make(http.Header)
+				}
+				trailer[key] = nil
+			}
+		}
+	}
+	delete(rp.header, "Trailer")
+
+	var url_ *url.URL
+	var requestURI string
+	if rp.method == "CONNECT" {
+		url_ = &url.URL{Host: rp.authority}
+		requestURI = rp.authority // mimic HTTP/1 server behavior
+	} else {
+		var err error
+		url_, err = url.ParseRequestURI(rp.path)
+		if err != nil {
+			return nil, nil, streamError(st.id, ErrCodeProtocol)
+		}
+		requestURI = rp.path
+	}
+
+	body := &requestBody{
+		conn:          sc,
+		stream:        st,
+		needsContinue: needsContinue,
+	}
+	req := &http.Request{
+		Method:     rp.method,
+		URL:        url_,
+		RemoteAddr: sc.remoteAddrStr,
+		Header:     rp.header,
+		RequestURI: requestURI,
+		Proto:      "HTTP/2.0",
+		ProtoMajor: 2,
+		ProtoMinor: 0,
+		TLS:        tlsState,
+		Host:       rp.authority,
+		Body:       body,
+		Trailer:    trailer,
+	}
+	req = req.WithContext(st.ctx)
+
+	rws := responseWriterStatePool.Get().(*responseWriterState)
+	bwSave := rws.bw
+	*rws = responseWriterState{} // zero all the fields
+	rws.conn = sc
+	rws.bw = bwSave
+	rws.bw.Reset(chunkWriter{rws})
+	rws.stream = st
+	rws.req = req
+	rws.body = body
+
+	rw := &responseWriter{rws: rws}
+	return rw, req, nil
+}
+
+// Run on its own goroutine.
+func (sc *serverConn) runHandler(rw *responseWriter, req *http.Request, handler func(http.ResponseWriter, *http.Request)) {
+	didPanic := true
+	defer func() {
+		rw.rws.stream.cancelCtx()
+		if didPanic {
+			e := recover()
+			sc.writeFrameFromHandler(FrameWriteRequest{
+				write:  handlerPanicRST{rw.rws.stream.id},
+				stream: rw.rws.stream,
+			})
+			// Same as net/http:
+			if e != nil && e != http.ErrAbortHandler {
+				const size = 64 << 10
+				buf := make([]byte, size)
+				buf = buf[:runtime.Stack(buf, false)]
+				sc.logf("http2: panic serving %v: %v\n%s", sc.conn.RemoteAddr(), e, buf)
+			}
+			return
+		}
+		rw.handlerDone()
+	}()
+	handler(rw, req)
+	didPanic = false
+}
+
+func handleHeaderListTooLong(w http.ResponseWriter, r *http.Request) {
+	// 10.5.1 Limits on Header Block Size:
+	// .. "A server that receives a larger header block than it is
+	// willing to handle can send an HTTP 431 (Request Header Fields Too
+	// Large) status code"
+	const statusRequestHeaderFieldsTooLarge = 431 // only in Go 1.6+
+	w.WriteHeader(statusRequestHeaderFieldsTooLarge)
+	io.WriteString(w, "<h1>HTTP Error 431</h1><p>Request Header Field(s) Too Large</p>")
+}
+
+// called from handler goroutines.
+// h may be nil.
+func (sc *serverConn) writeHeaders(st *stream, headerData *writeResHeaders) error {
+	sc.serveG.checkNotOn() // NOT on
+	var errc chan error
+	if headerData.h != nil {
+		// If there's a header map (which we don't own), so we have to block on
+		// waiting for this frame to be written, so an http.Flush mid-handler
+		// writes out the correct value of keys, before a handler later potentially
+		// mutates it.
+		errc = errChanPool.Get().(chan error)
+	}
+	if err := sc.writeFrameFromHandler(FrameWriteRequest{
+		write:  headerData,
+		stream: st,
+		done:   errc,
+	}); err != nil {
+		return err
+	}
+	if errc != nil {
+		select {
+		case err := <-errc:
+			errChanPool.Put(errc)
+			return err
+		case <-sc.doneServing:
+			return errClientDisconnected
+		case <-st.cw:
+			return errStreamClosed
+		}
+	}
+	return nil
+}
+
+// called from handler goroutines.
+func (sc *serverConn) write100ContinueHeaders(st *stream) {
+	sc.writeFrameFromHandler(FrameWriteRequest{
+		write:  write100ContinueHeadersFrame{st.id},
+		stream: st,
+	})
+}
+
+// A bodyReadMsg tells the server loop that the http.Handler read n
+// bytes of the DATA from the client on the given stream.
+type bodyReadMsg struct {
+	st *stream
+	n  int
+}
+
+// called from handler goroutines.
+// Notes that the handler for the given stream ID read n bytes of its body
+// and schedules flow control tokens to be sent.
+func (sc *serverConn) noteBodyReadFromHandler(st *stream, n int, err error) {
+	sc.serveG.checkNotOn() // NOT on
+	if n > 0 {
+		select {
+		case sc.bodyReadCh <- bodyReadMsg{st, n}:
+		case <-sc.doneServing:
+		}
+	}
+}
+
+func (sc *serverConn) noteBodyRead(st *stream, n int) {
+	sc.serveG.check()
+	sc.sendWindowUpdate(nil, n) // conn-level
+	if st.state != stateHalfClosedRemote && st.state != stateClosed {
+		// Don't send this WINDOW_UPDATE if the stream is closed
+		// remotely.
+		sc.sendWindowUpdate(st, n)
+	}
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate(st *stream, n int) {
+	sc.serveG.check()
+	// "The legal range for the increment to the flow control
+	// window is 1 to 2^31-1 (2,147,483,647) octets."
+	// A Go Read call on 64-bit machines could in theory read
+	// a larger Read than this. Very unlikely, but we handle it here
+	// rather than elsewhere for now.
+	const maxUint31 = 1<<31 - 1
+	for n >= maxUint31 {
+		sc.sendWindowUpdate32(st, maxUint31)
+		n -= maxUint31
+	}
+	sc.sendWindowUpdate32(st, int32(n))
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate32(st *stream, n int32) {
+	sc.serveG.check()
+	if n == 0 {
+		return
+	}
+	if n < 0 {
+		panic("negative update")
+	}
+	var streamID uint32
+	if st != nil {
+		streamID = st.id
+	}
+	sc.writeFrame(FrameWriteRequest{
+		write:  writeWindowUpdate{streamID: streamID, n: uint32(n)},
+		stream: st,
+	})
+	var ok bool
+	if st == nil {
+		ok = sc.inflow.add(n)
+	} else {
+		ok = st.inflow.add(n)
+	}
+	if !ok {
+		panic("internal error; sent too many window updates without decrements?")
+	}
+}
+
+// requestBody is the Handler's Request.Body type.
+// Read and Close may be called concurrently.
+type requestBody struct {
+	stream        *stream
+	conn          *serverConn
+	closed        bool  // for use by Close only
+	sawEOF        bool  // for use by Read only
+	pipe          *pipe // non-nil if we have a HTTP entity message body
+	needsContinue bool  // need to send a 100-continue
+}
+
+func (b *requestBody) Close() error {
+	if b.pipe != nil && !b.closed {
+		b.pipe.BreakWithError(errClosedBody)
+	}
+	b.closed = true
+	return nil
+}
+
+func (b *requestBody) Read(p []byte) (n int, err error) {
+	if b.needsContinue {
+		b.needsContinue = false
+		b.conn.write100ContinueHeaders(b.stream)
+	}
+	if b.pipe == nil || b.sawEOF {
+		return 0, io.EOF
+	}
+	n, err = b.pipe.Read(p)
+	if err == io.EOF {
+		b.sawEOF = true
+	}
+	if b.conn == nil && inTests {
+		return
+	}
+	b.conn.noteBodyReadFromHandler(b.stream, n, err)
+	return
+}
+
+// responseWriter is the http.ResponseWriter implementation. It's
+// intentionally small (1 pointer wide) to minimize garbage. The
+// responseWriterState pointer inside is zeroed at the end of a
+// request (in handlerDone) and calls on the responseWriter thereafter
+// simply crash (caller's mistake), but the much larger responseWriterState
+// and buffers are reused between multiple requests.
+type responseWriter struct {
+	rws *responseWriterState
+}
+
+// Optional http.ResponseWriter interfaces implemented.
+var (
+	_ http.CloseNotifier = (*responseWriter)(nil)
+	_ http.Flusher       = (*responseWriter)(nil)
+	_ stringWriter       = (*responseWriter)(nil)
+)
+
+type responseWriterState struct {
+	// immutable within a request:
+	stream *stream
+	req    *http.Request
+	body   *requestBody // to close at end of request, if DATA frames didn't
+	conn   *serverConn
+
+	// TODO: adjust buffer writing sizes based on server config, frame size updates from peer, etc
+	bw *bufio.Writer // writing to a chunkWriter{this *responseWriterState}
+
+	// mutated by http.Handler goroutine:
+	handlerHeader http.Header // nil until called
+	snapHeader    http.Header // snapshot of handlerHeader at WriteHeader time
+	trailers      []string    // set in writeChunk
+	status        int         // status code passed to WriteHeader
+	wroteHeader   bool        // WriteHeader called (explicitly or implicitly). Not necessarily sent to user yet.
+	sentHeader    bool        // have we sent the header frame?
+	handlerDone   bool        // handler has finished
+	dirty         bool        // a Write failed; don't reuse this responseWriterState
+
+	sentContentLen int64 // non-zero if handler set a Content-Length header
+	wroteBytes     int64
+
+	closeNotifierMu sync.Mutex // guards closeNotifierCh
+	closeNotifierCh chan bool  // nil until first used
+}
+
+type chunkWriter struct{ rws *responseWriterState }
+
+func (cw chunkWriter) Write(p []byte) (n int, err error) { return cw.rws.writeChunk(p) }
+
+func (rws *responseWriterState) hasTrailers() bool { return len(rws.trailers) > 0 }
+
+func (rws *responseWriterState) hasNonemptyTrailers() bool {
+	for _, trailer := range rws.trailers {
+		if _, ok := rws.handlerHeader[trailer]; ok {
+			return true
+		}
+	}
+	return false
+}
+
+// declareTrailer is called for each Trailer header when the
+// response header is written. It notes that a header will need to be
+// written in the trailers at the end of the response.
+func (rws *responseWriterState) declareTrailer(k string) {
+	k = http.CanonicalHeaderKey(k)
+	if !httpguts.ValidTrailerHeader(k) {
+		// Forbidden by RFC 7230, section 4.1.2.
+		rws.conn.logf("ignoring invalid trailer %q", k)
+		return
+	}
+	if !strSliceContains(rws.trailers, k) {
+		rws.trailers = append(rws.trailers, k)
+	}
+}
+
+// writeChunk writes chunks from the bufio.Writer. But because
+// bufio.Writer may bypass its chunking, sometimes p may be
+// arbitrarily large.
+//
+// writeChunk is also responsible (on the first chunk) for sending the
+// HEADER response.
+func (rws *responseWriterState) writeChunk(p []byte) (n int, err error) {
+	if !rws.wroteHeader {
+		rws.writeHeader(200)
+	}
+
+	isHeadResp := rws.req.Method == "HEAD"
+	if !rws.sentHeader {
+		rws.sentHeader = true
+		var ctype, clen string
+		if clen = rws.snapHeader.Get("Content-Length"); clen != "" {
+			rws.snapHeader.Del("Content-Length")
+			clen64, err := strconv.ParseInt(clen, 10, 64)
+			if err == nil && clen64 >= 0 {
+				rws.sentContentLen = clen64
+			} else {
+				clen = ""
+			}
+		}
+		if clen == "" && rws.handlerDone && bodyAllowedForStatus(rws.status) && (len(p) > 0 || !isHeadResp) {
+			clen = strconv.Itoa(len(p))
+		}
+		_, hasContentType := rws.snapHeader["Content-Type"]
+		// If the Content-Encoding is non-blank, we shouldn't
+		// sniff the body. See Issue golang.org/issue/31753.
+		ce := rws.snapHeader.Get("Content-Encoding")
+		hasCE := len(ce) > 0
+		if !hasCE && !hasContentType && bodyAllowedForStatus(rws.status) && len(p) > 0 {
+			ctype = http.DetectContentType(p)
+		}
+		var date string
+		if _, ok := rws.snapHeader["Date"]; !ok {
+			// TODO(bradfitz): be faster here, like net/http? measure.
+			date = time.Now().UTC().Format(http.TimeFormat)
+		}
+
+		for _, v := range rws.snapHeader["Trailer"] {
+			foreachHeaderElement(v, rws.declareTrailer)
+		}
+
+		// "Connection" headers aren't allowed in HTTP/2 (RFC 7540, 8.1.2.2),
+		// but respect "Connection" == "close" to mean sending a GOAWAY and tearing
+		// down the TCP connection when idle, like we do for HTTP/1.
+		// TODO: remove more Connection-specific header fields here, in addition
+		// to "Connection".
+		if _, ok := rws.snapHeader["Connection"]; ok {
+			v := rws.snapHeader.Get("Connection")
+			delete(rws.snapHeader, "Connection")
+			if v == "close" {
+				rws.conn.startGracefulShutdown()
+			}
+		}
+
+		endStream := (rws.handlerDone && !rws.hasTrailers() && len(p) == 0) || isHeadResp
+		err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+			streamID:      rws.stream.id,
+			httpResCode:   rws.status,
+			h:             rws.snapHeader,
+			endStream:     endStream,
+			contentType:   ctype,
+			contentLength: clen,
+			date:          date,
+		})
+		if err != nil {
+			rws.dirty = true
+			return 0, err
+		}
+		if endStream {
+			return 0, nil
+		}
+	}
+	if isHeadResp {
+		return len(p), nil
+	}
+	if len(p) == 0 && !rws.handlerDone {
+		return 0, nil
+	}
+
+	if rws.handlerDone {
+		rws.promoteUndeclaredTrailers()
+	}
+
+	// only send trailers if they have actually been defined by the
+	// server handler.
+	hasNonemptyTrailers := rws.hasNonemptyTrailers()
+	endStream := rws.handlerDone && !hasNonemptyTrailers
+	if len(p) > 0 || endStream {
+		// only send a 0 byte DATA frame if we're ending the stream.
+		if err := rws.conn.writeDataFromHandler(rws.stream, p, endStream); err != nil {
+			rws.dirty = true
+			return 0, err
+		}
+	}
+
+	if rws.handlerDone && hasNonemptyTrailers {
+		err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+			streamID:  rws.stream.id,
+			h:         rws.handlerHeader,
+			trailers:  rws.trailers,
+			endStream: true,
+		})
+		if err != nil {
+			rws.dirty = true
+		}
+		return len(p), err
+	}
+	return len(p), nil
+}
+
+// TrailerPrefix is a magic prefix for ResponseWriter.Header map keys
+// that, if present, signals that the map entry is actually for
+// the response trailers, and not the response headers. The prefix
+// is stripped after the ServeHTTP call finishes and the values are
+// sent in the trailers.
+//
+// This mechanism is intended only for trailers that are not known
+// prior to the headers being written. If the set of trailers is fixed
+// or known before the header is written, the normal Go trailers mechanism
+// is preferred:
+//    https://golang.org/pkg/net/http/#ResponseWriter
+//    https://golang.org/pkg/net/http/#example_ResponseWriter_trailers
+const TrailerPrefix = "Trailer:"
+
+// promoteUndeclaredTrailers permits http.Handlers to set trailers
+// after the header has already been flushed. Because the Go
+// ResponseWriter interface has no way to set Trailers (only the
+// Header), and because we didn't want to expand the ResponseWriter
+// interface, and because nobody used trailers, and because RFC 7230
+// says you SHOULD (but not must) predeclare any trailers in the
+// header, the official ResponseWriter rules said trailers in Go must
+// be predeclared, and then we reuse the same ResponseWriter.Header()
+// map to mean both Headers and Trailers. When it's time to write the
+// Trailers, we pick out the fields of Headers that were declared as
+// trailers. That worked for a while, until we found the first major
+// user of Trailers in the wild: gRPC (using them only over http2),
+// and gRPC libraries permit setting trailers mid-stream without
+// predeclaring them. So: change of plans. We still permit the old
+// way, but we also permit this hack: if a Header() key begins with
+// "Trailer:", the suffix of that key is a Trailer. Because ':' is an
+// invalid token byte anyway, there is no ambiguity. (And it's already
+// filtered out) It's mildly hacky, but not terrible.
+//
+// This method runs after the Handler is done and promotes any Header
+// fields to be trailers.
+func (rws *responseWriterState) promoteUndeclaredTrailers() {
+	for k, vv := range rws.handlerHeader {
+		if !strings.HasPrefix(k, TrailerPrefix) {
+			continue
+		}
+		trailerKey := strings.TrimPrefix(k, TrailerPrefix)
+		rws.declareTrailer(trailerKey)
+		rws.handlerHeader[http.CanonicalHeaderKey(trailerKey)] = vv
+	}
+
+	if len(rws.trailers) > 1 {
+		sorter := sorterPool.Get().(*sorter)
+		sorter.SortStrings(rws.trailers)
+		sorterPool.Put(sorter)
+	}
+}
+
+func (w *responseWriter) Flush() {
+	rws := w.rws
+	if rws == nil {
+		panic("Header called after Handler finished")
+	}
+	if rws.bw.Buffered() > 0 {
+		if err := rws.bw.Flush(); err != nil {
+			// Ignore the error. The frame writer already knows.
+			return
+		}
+	} else {
+		// The bufio.Writer won't call chunkWriter.Write
+		// (writeChunk with zero bytes, so we have to do it
+		// ourselves to force the HTTP response header and/or
+		// final DATA frame (with END_STREAM) to be sent.
+		rws.writeChunk(nil)
+	}
+}
+
+func (w *responseWriter) CloseNotify() <-chan bool {
+	rws := w.rws
+	if rws == nil {
+		panic("CloseNotify called after Handler finished")
+	}
+	rws.closeNotifierMu.Lock()
+	ch := rws.closeNotifierCh
+	if ch == nil {
+		ch = make(chan bool, 1)
+		rws.closeNotifierCh = ch
+		cw := rws.stream.cw
+		go func() {
+			cw.Wait() // wait for close
+			ch <- true
+		}()
+	}
+	rws.closeNotifierMu.Unlock()
+	return ch
+}
+
+func (w *responseWriter) Header() http.Header {
+	rws := w.rws
+	if rws == nil {
+		panic("Header called after Handler finished")
+	}
+	if rws.handlerHeader == nil {
+		rws.handlerHeader = make(http.Header)
+	}
+	return rws.handlerHeader
+}
+
+// checkWriteHeaderCode is a copy of net/http's checkWriteHeaderCode.
+func checkWriteHeaderCode(code int) {
+	// Issue 22880: require valid WriteHeader status codes.
+	// For now we only enforce that it's three digits.
+	// In the future we might block things over 599 (600 and above aren't defined
+	// at http://httpwg.org/specs/rfc7231.html#status.codes)
+	// and we might block under 200 (once we have more mature 1xx support).
+	// But for now any three digits.
+	//
+	// We used to send "HTTP/1.1 000 0" on the wire in responses but there's
+	// no equivalent bogus thing we can realistically send in HTTP/2,
+	// so we'll consistently panic instead and help people find their bugs
+	// early. (We can't return an error from WriteHeader even if we wanted to.)
+	if code < 100 || code > 999 {
+		panic(fmt.Sprintf("invalid WriteHeader code %v", code))
+	}
+}
+
+func (w *responseWriter) WriteHeader(code int) {
+	rws := w.rws
+	if rws == nil {
+		panic("WriteHeader called after Handler finished")
+	}
+	rws.writeHeader(code)
+}
+
+func (rws *responseWriterState) writeHeader(code int) {
+	if !rws.wroteHeader {
+		checkWriteHeaderCode(code)
+		rws.wroteHeader = true
+		rws.status = code
+		if len(rws.handlerHeader) > 0 {
+			rws.snapHeader = cloneHeader(rws.handlerHeader)
+		}
+	}
+}
+
+func cloneHeader(h http.Header) http.Header {
+	h2 := make(http.Header, len(h))
+	for k, vv := range h {
+		vv2 := make([]string, len(vv))
+		copy(vv2, vv)
+		h2[k] = vv2
+	}
+	return h2
+}
+
+// The Life Of A Write is like this:
+//
+// * Handler calls w.Write or w.WriteString ->
+// * -> rws.bw (*bufio.Writer) ->
+// * (Handler might call Flush)
+// * -> chunkWriter{rws}
+// * -> responseWriterState.writeChunk(p []byte)
+// * -> responseWriterState.writeChunk (most of the magic; see comment there)
+func (w *responseWriter) Write(p []byte) (n int, err error) {
+	return w.write(len(p), p, "")
+}
+
+func (w *responseWriter) WriteString(s string) (n int, err error) {
+	return w.write(len(s), nil, s)
+}
+
+// either dataB or dataS is non-zero.
+func (w *responseWriter) write(lenData int, dataB []byte, dataS string) (n int, err error) {
+	rws := w.rws
+	if rws == nil {
+		panic("Write called after Handler finished")
+	}
+	if !rws.wroteHeader {
+		w.WriteHeader(200)
+	}
+	if !bodyAllowedForStatus(rws.status) {
+		return 0, http.ErrBodyNotAllowed
+	}
+	rws.wroteBytes += int64(len(dataB)) + int64(len(dataS)) // only one can be set
+	if rws.sentContentLen != 0 && rws.wroteBytes > rws.sentContentLen {
+		// TODO: send a RST_STREAM
+		return 0, errors.New("http2: handler wrote more than declared Content-Length")
+	}
+
+	if dataB != nil {
+		return rws.bw.Write(dataB)
+	} else {
+		return rws.bw.WriteString(dataS)
+	}
+}
+
+func (w *responseWriter) handlerDone() {
+	rws := w.rws
+	dirty := rws.dirty
+	rws.handlerDone = true
+	w.Flush()
+	w.rws = nil
+	if !dirty {
+		// Only recycle the pool if all prior Write calls to
+		// the serverConn goroutine completed successfully. If
+		// they returned earlier due to resets from the peer
+		// there might still be write goroutines outstanding
+		// from the serverConn referencing the rws memory. See
+		// issue 20704.
+		responseWriterStatePool.Put(rws)
+	}
+}
+
+// Push errors.
+var (
+	ErrRecursivePush    = errors.New("http2: recursive push not allowed")
+	ErrPushLimitReached = errors.New("http2: push would exceed peer's SETTINGS_MAX_CONCURRENT_STREAMS")
+)
+
+var _ http.Pusher = (*responseWriter)(nil)
+
+func (w *responseWriter) Push(target string, opts *http.PushOptions) error {
+	st := w.rws.stream
+	sc := st.sc
+	sc.serveG.checkNotOn()
+
+	// No recursive pushes: "PUSH_PROMISE frames MUST only be sent on a peer-initiated stream."
+	// http://tools.ietf.org/html/rfc7540#section-6.6
+	if st.isPushed() {
+		return ErrRecursivePush
+	}
+
+	if opts == nil {
+		opts = new(http.PushOptions)
+	}
+
+	// Default options.
+	if opts.Method == "" {
+		opts.Method = "GET"
+	}
+	if opts.Header == nil {
+		opts.Header = http.Header{}
+	}
+	wantScheme := "http"
+	if w.rws.req.TLS != nil {
+		wantScheme = "https"
+	}
+
+	// Validate the request.
+	u, err := url.Parse(target)
+	if err != nil {
+		return err
+	}
+	if u.Scheme == "" {
+		if !strings.HasPrefix(target, "/") {
+			return fmt.Errorf("target must be an absolute URL or an absolute path: %q", target)
+		}
+		u.Scheme = wantScheme
+		u.Host = w.rws.req.Host
+	} else {
+		if u.Scheme != wantScheme {
+			return fmt.Errorf("cannot push URL with scheme %q from request with scheme %q", u.Scheme, wantScheme)
+		}
+		if u.Host == "" {
+			return errors.New("URL must have a host")
+		}
+	}
+	for k := range opts.Header {
+		if strings.HasPrefix(k, ":") {
+			return fmt.Errorf("promised request headers cannot include pseudo header %q", k)
+		}
+		// These headers are meaningful only if the request has a body,
+		// but PUSH_PROMISE requests cannot have a body.
+		// http://tools.ietf.org/html/rfc7540#section-8.2
+		// Also disallow Host, since the promised URL must be absolute.
+		switch strings.ToLower(k) {
+		case "content-length", "content-encoding", "trailer", "te", "expect", "host":
+			return fmt.Errorf("promised request headers cannot include %q", k)
+		}
+	}
+	if err := checkValidHTTP2RequestHeaders(opts.Header); err != nil {
+		return err
+	}
+
+	// The RFC effectively limits promised requests to GET and HEAD:
+	// "Promised requests MUST be cacheable [GET, HEAD, or POST], and MUST be safe [GET or HEAD]"
+	// http://tools.ietf.org/html/rfc7540#section-8.2
+	if opts.Method != "GET" && opts.Method != "HEAD" {
+		return fmt.Errorf("method %q must be GET or HEAD", opts.Method)
+	}
+
+	msg := &startPushRequest{
+		parent: st,
+		method: opts.Method,
+		url:    u,
+		header: cloneHeader(opts.Header),
+		done:   errChanPool.Get().(chan error),
+	}
+
+	select {
+	case <-sc.doneServing:
+		return errClientDisconnected
+	case <-st.cw:
+		return errStreamClosed
+	case sc.serveMsgCh <- msg:
+	}
+
+	select {
+	case <-sc.doneServing:
+		return errClientDisconnected
+	case <-st.cw:
+		return errStreamClosed
+	case err := <-msg.done:
+		errChanPool.Put(msg.done)
+		return err
+	}
+}
+
+type startPushRequest struct {
+	parent *stream
+	method string
+	url    *url.URL
+	header http.Header
+	done   chan error
+}
+
+func (sc *serverConn) startPush(msg *startPushRequest) {
+	sc.serveG.check()
+
+	// http://tools.ietf.org/html/rfc7540#section-6.6.
+	// PUSH_PROMISE frames MUST only be sent on a peer-initiated stream that
+	// is in either the "open" or "half-closed (remote)" state.
+	if msg.parent.state != stateOpen && msg.parent.state != stateHalfClosedRemote {
+		// responseWriter.Push checks that the stream is peer-initiated.
+		msg.done <- errStreamClosed
+		return
+	}
+
+	// http://tools.ietf.org/html/rfc7540#section-6.6.
+	if !sc.pushEnabled {
+		msg.done <- http.ErrNotSupported
+		return
+	}
+
+	// PUSH_PROMISE frames must be sent in increasing order by stream ID, so
+	// we allocate an ID for the promised stream lazily, when the PUSH_PROMISE
+	// is written. Once the ID is allocated, we start the request handler.
+	allocatePromisedID := func() (uint32, error) {
+		sc.serveG.check()
+
+		// Check this again, just in case. Technically, we might have received
+		// an updated SETTINGS by the time we got around to writing this frame.
+		if !sc.pushEnabled {
+			return 0, http.ErrNotSupported
+		}
+		// http://tools.ietf.org/html/rfc7540#section-6.5.2.
+		if sc.curPushedStreams+1 > sc.clientMaxStreams {
+			return 0, ErrPushLimitReached
+		}
+
+		// http://tools.ietf.org/html/rfc7540#section-5.1.1.
+		// Streams initiated by the server MUST use even-numbered identifiers.
+		// A server that is unable to establish a new stream identifier can send a GOAWAY
+		// frame so that the client is forced to open a new connection for new streams.
+		if sc.maxPushPromiseID+2 >= 1<<31 {
+			sc.startGracefulShutdownInternal()
+			return 0, ErrPushLimitReached
+		}
+		sc.maxPushPromiseID += 2
+		promisedID := sc.maxPushPromiseID
+
+		// http://tools.ietf.org/html/rfc7540#section-8.2.
+		// Strictly speaking, the new stream should start in "reserved (local)", then
+		// transition to "half closed (remote)" after sending the initial HEADERS, but
+		// we start in "half closed (remote)" for simplicity.
+		// See further comments at the definition of stateHalfClosedRemote.
+		promised := sc.newStream(promisedID, msg.parent.id, stateHalfClosedRemote)
+		rw, req, err := sc.newWriterAndRequestNoBody(promised, requestParam{
+			method:    msg.method,
+			scheme:    msg.url.Scheme,
+			authority: msg.url.Host,
+			path:      msg.url.RequestURI(),
+			header:    cloneHeader(msg.header), // clone since handler runs concurrently with writing the PUSH_PROMISE
+		})
+		if err != nil {
+			// Should not happen, since we've already validated msg.url.
+			panic(fmt.Sprintf("newWriterAndRequestNoBody(%+v): %v", msg.url, err))
+		}
+
+		go sc.runHandler(rw, req, sc.handler.ServeHTTP)
+		return promisedID, nil
+	}
+
+	sc.writeFrame(FrameWriteRequest{
+		write: &writePushPromise{
+			streamID:           msg.parent.id,
+			method:             msg.method,
+			url:                msg.url,
+			h:                  msg.header,
+			allocatePromisedID: allocatePromisedID,
+		},
+		stream: msg.parent,
+		done:   msg.done,
+	})
+}
+
+// foreachHeaderElement splits v according to the "#rule" construction
+// in RFC 7230 section 7 and calls fn for each non-empty element.
+func foreachHeaderElement(v string, fn func(string)) {
+	v = textproto.TrimString(v)
+	if v == "" {
+		return
+	}
+	if !strings.Contains(v, ",") {
+		fn(v)
+		return
+	}
+	for _, f := range strings.Split(v, ",") {
+		if f = textproto.TrimString(f); f != "" {
+			fn(f)
+		}
+	}
+}
+
+// From http://httpwg.org/specs/rfc7540.html#rfc.section.8.1.2.2
+var connHeaders = []string{
+	"Connection",
+	"Keep-Alive",
+	"Proxy-Connection",
+	"Transfer-Encoding",
+	"Upgrade",
+}
+
+// checkValidHTTP2RequestHeaders checks whether h is a valid HTTP/2 request,
+// per RFC 7540 Section 8.1.2.2.
+// The returned error is reported to users.
+func checkValidHTTP2RequestHeaders(h http.Header) error {
+	for _, k := range connHeaders {
+		if _, ok := h[k]; ok {
+			return fmt.Errorf("request header %q is not valid in HTTP/2", k)
+		}
+	}
+	te := h["Te"]
+	if len(te) > 0 && (len(te) > 1 || (te[0] != "trailers" && te[0] != "")) {
+		return errors.New(`request header "TE" may only be "trailers" in HTTP/2`)
+	}
+	return nil
+}
+
+func new400Handler(err error) http.HandlerFunc {
+	return func(w http.ResponseWriter, r *http.Request) {
+		http.Error(w, err.Error(), http.StatusBadRequest)
+	}
+}
+
+// h1ServerKeepAlivesDisabled reports whether hs has its keep-alives
+// disabled. See comments on h1ServerShutdownChan above for why
+// the code is written this way.
+func h1ServerKeepAlivesDisabled(hs *http.Server) bool {
+	var x interface{} = hs
+	type I interface {
+		doKeepAlives() bool
+	}
+	if hs, ok := x.(I); ok {
+		return !hs.doKeepAlives()
+	}
+	return false
+}
diff --git a/vendor/golang.org/x/net/http2/transport.go b/vendor/golang.org/x/net/http2/transport.go
new file mode 100644
index 0000000..81778be
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/transport.go
@@ -0,0 +1,2667 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Transport code.
+
+package http2
+
+import (
+	"bufio"
+	"bytes"
+	"compress/gzip"
+	"context"
+	"crypto/rand"
+	"crypto/tls"
+	"errors"
+	"fmt"
+	"io"
+	"io/ioutil"
+	"log"
+	"math"
+	mathrand "math/rand"
+	"net"
+	"net/http"
+	"net/http/httptrace"
+	"net/textproto"
+	"sort"
+	"strconv"
+	"strings"
+	"sync"
+	"sync/atomic"
+	"time"
+
+	"golang.org/x/net/http/httpguts"
+	"golang.org/x/net/http2/hpack"
+	"golang.org/x/net/idna"
+)
+
+const (
+	// transportDefaultConnFlow is how many connection-level flow control
+	// tokens we give the server at start-up, past the default 64k.
+	transportDefaultConnFlow = 1 << 30
+
+	// transportDefaultStreamFlow is how many stream-level flow
+	// control tokens we announce to the peer, and how many bytes
+	// we buffer per stream.
+	transportDefaultStreamFlow = 4 << 20
+
+	// transportDefaultStreamMinRefresh is the minimum number of bytes we'll send
+	// a stream-level WINDOW_UPDATE for at a time.
+	transportDefaultStreamMinRefresh = 4 << 10
+
+	defaultUserAgent = "Go-http-client/2.0"
+)
+
+// Transport is an HTTP/2 Transport.
+//
+// A Transport internally caches connections to servers. It is safe
+// for concurrent use by multiple goroutines.
+type Transport struct {
+	// DialTLS specifies an optional dial function for creating
+	// TLS connections for requests.
+	//
+	// If DialTLS is nil, tls.Dial is used.
+	//
+	// If the returned net.Conn has a ConnectionState method like tls.Conn,
+	// it will be used to set http.Response.TLS.
+	DialTLS func(network, addr string, cfg *tls.Config) (net.Conn, error)
+
+	// TLSClientConfig specifies the TLS configuration to use with
+	// tls.Client. If nil, the default configuration is used.
+	TLSClientConfig *tls.Config
+
+	// ConnPool optionally specifies an alternate connection pool to use.
+	// If nil, the default is used.
+	ConnPool ClientConnPool
+
+	// DisableCompression, if true, prevents the Transport from
+	// requesting compression with an "Accept-Encoding: gzip"
+	// request header when the Request contains no existing
+	// Accept-Encoding value. If the Transport requests gzip on
+	// its own and gets a gzipped response, it's transparently
+	// decoded in the Response.Body. However, if the user
+	// explicitly requested gzip it is not automatically
+	// uncompressed.
+	DisableCompression bool
+
+	// AllowHTTP, if true, permits HTTP/2 requests using the insecure,
+	// plain-text "http" scheme. Note that this does not enable h2c support.
+	AllowHTTP bool
+
+	// MaxHeaderListSize is the http2 SETTINGS_MAX_HEADER_LIST_SIZE to
+	// send in the initial settings frame. It is how many bytes
+	// of response headers are allowed. Unlike the http2 spec, zero here
+	// means to use a default limit (currently 10MB). If you actually
+	// want to advertise an unlimited value to the peer, Transport
+	// interprets the highest possible value here (0xffffffff or 1<<32-1)
+	// to mean no limit.
+	MaxHeaderListSize uint32
+
+	// StrictMaxConcurrentStreams controls whether the server's
+	// SETTINGS_MAX_CONCURRENT_STREAMS should be respected
+	// globally. If false, new TCP connections are created to the
+	// server as needed to keep each under the per-connection
+	// SETTINGS_MAX_CONCURRENT_STREAMS limit. If true, the
+	// server's SETTINGS_MAX_CONCURRENT_STREAMS is interpreted as
+	// a global limit and callers of RoundTrip block when needed,
+	// waiting for their turn.
+	StrictMaxConcurrentStreams bool
+
+	// t1, if non-nil, is the standard library Transport using
+	// this transport. Its settings are used (but not its
+	// RoundTrip method, etc).
+	t1 *http.Transport
+
+	connPoolOnce  sync.Once
+	connPoolOrDef ClientConnPool // non-nil version of ConnPool
+}
+
+func (t *Transport) maxHeaderListSize() uint32 {
+	if t.MaxHeaderListSize == 0 {
+		return 10 << 20
+	}
+	if t.MaxHeaderListSize == 0xffffffff {
+		return 0
+	}
+	return t.MaxHeaderListSize
+}
+
+func (t *Transport) disableCompression() bool {
+	return t.DisableCompression || (t.t1 != nil && t.t1.DisableCompression)
+}
+
+// ConfigureTransport configures a net/http HTTP/1 Transport to use HTTP/2.
+// It returns an error if t1 has already been HTTP/2-enabled.
+func ConfigureTransport(t1 *http.Transport) error {
+	_, err := configureTransport(t1)
+	return err
+}
+
+func configureTransport(t1 *http.Transport) (*Transport, error) {
+	connPool := new(clientConnPool)
+	t2 := &Transport{
+		ConnPool: noDialClientConnPool{connPool},
+		t1:       t1,
+	}
+	connPool.t = t2
+	if err := registerHTTPSProtocol(t1, noDialH2RoundTripper{t2}); err != nil {
+		return nil, err
+	}
+	if t1.TLSClientConfig == nil {
+		t1.TLSClientConfig = new(tls.Config)
+	}
+	if !strSliceContains(t1.TLSClientConfig.NextProtos, "h2") {
+		t1.TLSClientConfig.NextProtos = append([]string{"h2"}, t1.TLSClientConfig.NextProtos...)
+	}
+	if !strSliceContains(t1.TLSClientConfig.NextProtos, "http/1.1") {
+		t1.TLSClientConfig.NextProtos = append(t1.TLSClientConfig.NextProtos, "http/1.1")
+	}
+	upgradeFn := func(authority string, c *tls.Conn) http.RoundTripper {
+		addr := authorityAddr("https", authority)
+		if used, err := connPool.addConnIfNeeded(addr, t2, c); err != nil {
+			go c.Close()
+			return erringRoundTripper{err}
+		} else if !used {
+			// Turns out we don't need this c.
+			// For example, two goroutines made requests to the same host
+			// at the same time, both kicking off TCP dials. (since protocol
+			// was unknown)
+			go c.Close()
+		}
+		return t2
+	}
+	if m := t1.TLSNextProto; len(m) == 0 {
+		t1.TLSNextProto = map[string]func(string, *tls.Conn) http.RoundTripper{
+			"h2": upgradeFn,
+		}
+	} else {
+		m["h2"] = upgradeFn
+	}
+	return t2, nil
+}
+
+func (t *Transport) connPool() ClientConnPool {
+	t.connPoolOnce.Do(t.initConnPool)
+	return t.connPoolOrDef
+}
+
+func (t *Transport) initConnPool() {
+	if t.ConnPool != nil {
+		t.connPoolOrDef = t.ConnPool
+	} else {
+		t.connPoolOrDef = &clientConnPool{t: t}
+	}
+}
+
+// ClientConn is the state of a single HTTP/2 client connection to an
+// HTTP/2 server.
+type ClientConn struct {
+	t         *Transport
+	tconn     net.Conn             // usually *tls.Conn, except specialized impls
+	tlsState  *tls.ConnectionState // nil only for specialized impls
+	reused    uint32               // whether conn is being reused; atomic
+	singleUse bool                 // whether being used for a single http.Request
+
+	// readLoop goroutine fields:
+	readerDone chan struct{} // closed on error
+	readerErr  error         // set before readerDone is closed
+
+	idleTimeout time.Duration // or 0 for never
+	idleTimer   *time.Timer
+
+	mu              sync.Mutex // guards following
+	cond            *sync.Cond // hold mu; broadcast on flow/closed changes
+	flow            flow       // our conn-level flow control quota (cs.flow is per stream)
+	inflow          flow       // peer's conn-level flow control
+	closing         bool
+	closed          bool
+	wantSettingsAck bool                     // we sent a SETTINGS frame and haven't heard back
+	goAway          *GoAwayFrame             // if non-nil, the GoAwayFrame we received
+	goAwayDebug     string                   // goAway frame's debug data, retained as a string
+	streams         map[uint32]*clientStream // client-initiated
+	nextStreamID    uint32
+	pendingRequests int                       // requests blocked and waiting to be sent because len(streams) == maxConcurrentStreams
+	pings           map[[8]byte]chan struct{} // in flight ping data to notification channel
+	bw              *bufio.Writer
+	br              *bufio.Reader
+	fr              *Framer
+	lastActive      time.Time
+	lastIdle        time.Time // time last idle
+	// Settings from peer: (also guarded by mu)
+	maxFrameSize          uint32
+	maxConcurrentStreams  uint32
+	peerMaxHeaderListSize uint64
+	initialWindowSize     uint32
+
+	hbuf    bytes.Buffer // HPACK encoder writes into this
+	henc    *hpack.Encoder
+	freeBuf [][]byte
+
+	wmu  sync.Mutex // held while writing; acquire AFTER mu if holding both
+	werr error      // first write error that has occurred
+}
+
+// clientStream is the state for a single HTTP/2 stream. One of these
+// is created for each Transport.RoundTrip call.
+type clientStream struct {
+	cc            *ClientConn
+	req           *http.Request
+	trace         *httptrace.ClientTrace // or nil
+	ID            uint32
+	resc          chan resAndError
+	bufPipe       pipe // buffered pipe with the flow-controlled response payload
+	startedWrite  bool // started request body write; guarded by cc.mu
+	requestedGzip bool
+	on100         func() // optional code to run if get a 100 continue response
+
+	flow        flow  // guarded by cc.mu
+	inflow      flow  // guarded by cc.mu
+	bytesRemain int64 // -1 means unknown; owned by transportResponseBody.Read
+	readErr     error // sticky read error; owned by transportResponseBody.Read
+	stopReqBody error // if non-nil, stop writing req body; guarded by cc.mu
+	didReset    bool  // whether we sent a RST_STREAM to the server; guarded by cc.mu
+
+	peerReset chan struct{} // closed on peer reset
+	resetErr  error         // populated before peerReset is closed
+
+	done chan struct{} // closed when stream remove from cc.streams map; close calls guarded by cc.mu
+
+	// owned by clientConnReadLoop:
+	firstByte    bool  // got the first response byte
+	pastHeaders  bool  // got first MetaHeadersFrame (actual headers)
+	pastTrailers bool  // got optional second MetaHeadersFrame (trailers)
+	num1xx       uint8 // number of 1xx responses seen
+
+	trailer    http.Header  // accumulated trailers
+	resTrailer *http.Header // client's Response.Trailer
+}
+
+// awaitRequestCancel waits for the user to cancel a request or for the done
+// channel to be signaled. A non-nil error is returned only if the request was
+// canceled.
+func awaitRequestCancel(req *http.Request, done <-chan struct{}) error {
+	ctx := req.Context()
+	if req.Cancel == nil && ctx.Done() == nil {
+		return nil
+	}
+	select {
+	case <-req.Cancel:
+		return errRequestCanceled
+	case <-ctx.Done():
+		return ctx.Err()
+	case <-done:
+		return nil
+	}
+}
+
+var got1xxFuncForTests func(int, textproto.MIMEHeader) error
+
+// get1xxTraceFunc returns the value of request's httptrace.ClientTrace.Got1xxResponse func,
+// if any. It returns nil if not set or if the Go version is too old.
+func (cs *clientStream) get1xxTraceFunc() func(int, textproto.MIMEHeader) error {
+	if fn := got1xxFuncForTests; fn != nil {
+		return fn
+	}
+	return traceGot1xxResponseFunc(cs.trace)
+}
+
+// awaitRequestCancel waits for the user to cancel a request, its context to
+// expire, or for the request to be done (any way it might be removed from the
+// cc.streams map: peer reset, successful completion, TCP connection breakage,
+// etc). If the request is canceled, then cs will be canceled and closed.
+func (cs *clientStream) awaitRequestCancel(req *http.Request) {
+	if err := awaitRequestCancel(req, cs.done); err != nil {
+		cs.cancelStream()
+		cs.bufPipe.CloseWithError(err)
+	}
+}
+
+func (cs *clientStream) cancelStream() {
+	cc := cs.cc
+	cc.mu.Lock()
+	didReset := cs.didReset
+	cs.didReset = true
+	cc.mu.Unlock()
+
+	if !didReset {
+		cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+		cc.forgetStreamID(cs.ID)
+	}
+}
+
+// checkResetOrDone reports any error sent in a RST_STREAM frame by the
+// server, or errStreamClosed if the stream is complete.
+func (cs *clientStream) checkResetOrDone() error {
+	select {
+	case <-cs.peerReset:
+		return cs.resetErr
+	case <-cs.done:
+		return errStreamClosed
+	default:
+		return nil
+	}
+}
+
+func (cs *clientStream) getStartedWrite() bool {
+	cc := cs.cc
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	return cs.startedWrite
+}
+
+func (cs *clientStream) abortRequestBodyWrite(err error) {
+	if err == nil {
+		panic("nil error")
+	}
+	cc := cs.cc
+	cc.mu.Lock()
+	cs.stopReqBody = err
+	cc.cond.Broadcast()
+	cc.mu.Unlock()
+}
+
+type stickyErrWriter struct {
+	w   io.Writer
+	err *error
+}
+
+func (sew stickyErrWriter) Write(p []byte) (n int, err error) {
+	if *sew.err != nil {
+		return 0, *sew.err
+	}
+	n, err = sew.w.Write(p)
+	*sew.err = err
+	return
+}
+
+// noCachedConnError is the concrete type of ErrNoCachedConn, which
+// needs to be detected by net/http regardless of whether it's its
+// bundled version (in h2_bundle.go with a rewritten type name) or
+// from a user's x/net/http2. As such, as it has a unique method name
+// (IsHTTP2NoCachedConnError) that net/http sniffs for via func
+// isNoCachedConnError.
+type noCachedConnError struct{}
+
+func (noCachedConnError) IsHTTP2NoCachedConnError() {}
+func (noCachedConnError) Error() string             { return "http2: no cached connection was available" }
+
+// isNoCachedConnError reports whether err is of type noCachedConnError
+// or its equivalent renamed type in net/http2's h2_bundle.go. Both types
+// may coexist in the same running program.
+func isNoCachedConnError(err error) bool {
+	_, ok := err.(interface{ IsHTTP2NoCachedConnError() })
+	return ok
+}
+
+var ErrNoCachedConn error = noCachedConnError{}
+
+// RoundTripOpt are options for the Transport.RoundTripOpt method.
+type RoundTripOpt struct {
+	// OnlyCachedConn controls whether RoundTripOpt may
+	// create a new TCP connection. If set true and
+	// no cached connection is available, RoundTripOpt
+	// will return ErrNoCachedConn.
+	OnlyCachedConn bool
+}
+
+func (t *Transport) RoundTrip(req *http.Request) (*http.Response, error) {
+	return t.RoundTripOpt(req, RoundTripOpt{})
+}
+
+// authorityAddr returns a given authority (a host/IP, or host:port / ip:port)
+// and returns a host:port. The port 443 is added if needed.
+func authorityAddr(scheme string, authority string) (addr string) {
+	host, port, err := net.SplitHostPort(authority)
+	if err != nil { // authority didn't have a port
+		port = "443"
+		if scheme == "http" {
+			port = "80"
+		}
+		host = authority
+	}
+	if a, err := idna.ToASCII(host); err == nil {
+		host = a
+	}
+	// IPv6 address literal, without a port:
+	if strings.HasPrefix(host, "[") && strings.HasSuffix(host, "]") {
+		return host + ":" + port
+	}
+	return net.JoinHostPort(host, port)
+}
+
+// RoundTripOpt is like RoundTrip, but takes options.
+func (t *Transport) RoundTripOpt(req *http.Request, opt RoundTripOpt) (*http.Response, error) {
+	if !(req.URL.Scheme == "https" || (req.URL.Scheme == "http" && t.AllowHTTP)) {
+		return nil, errors.New("http2: unsupported scheme")
+	}
+
+	addr := authorityAddr(req.URL.Scheme, req.URL.Host)
+	for retry := 0; ; retry++ {
+		cc, err := t.connPool().GetClientConn(req, addr)
+		if err != nil {
+			t.vlogf("http2: Transport failed to get client conn for %s: %v", addr, err)
+			return nil, err
+		}
+		reused := !atomic.CompareAndSwapUint32(&cc.reused, 0, 1)
+		traceGotConn(req, cc, reused)
+		res, gotErrAfterReqBodyWrite, err := cc.roundTrip(req)
+		if err != nil && retry <= 6 {
+			if req, err = shouldRetryRequest(req, err, gotErrAfterReqBodyWrite); err == nil {
+				// After the first retry, do exponential backoff with 10% jitter.
+				if retry == 0 {
+					continue
+				}
+				backoff := float64(uint(1) << (uint(retry) - 1))
+				backoff += backoff * (0.1 * mathrand.Float64())
+				select {
+				case <-time.After(time.Second * time.Duration(backoff)):
+					continue
+				case <-req.Context().Done():
+					return nil, req.Context().Err()
+				}
+			}
+		}
+		if err != nil {
+			t.vlogf("RoundTrip failure: %v", err)
+			return nil, err
+		}
+		return res, nil
+	}
+}
+
+// CloseIdleConnections closes any connections which were previously
+// connected from previous requests but are now sitting idle.
+// It does not interrupt any connections currently in use.
+func (t *Transport) CloseIdleConnections() {
+	if cp, ok := t.connPool().(clientConnPoolIdleCloser); ok {
+		cp.closeIdleConnections()
+	}
+}
+
+var (
+	errClientConnClosed    = errors.New("http2: client conn is closed")
+	errClientConnUnusable  = errors.New("http2: client conn not usable")
+	errClientConnGotGoAway = errors.New("http2: Transport received Server's graceful shutdown GOAWAY")
+)
+
+// shouldRetryRequest is called by RoundTrip when a request fails to get
+// response headers. It is always called with a non-nil error.
+// It returns either a request to retry (either the same request, or a
+// modified clone), or an error if the request can't be replayed.
+func shouldRetryRequest(req *http.Request, err error, afterBodyWrite bool) (*http.Request, error) {
+	if !canRetryError(err) {
+		return nil, err
+	}
+	// If the Body is nil (or http.NoBody), it's safe to reuse
+	// this request and its Body.
+	if req.Body == nil || req.Body == http.NoBody {
+		return req, nil
+	}
+
+	// If the request body can be reset back to its original
+	// state via the optional req.GetBody, do that.
+	if req.GetBody != nil {
+		// TODO: consider a req.Body.Close here? or audit that all caller paths do?
+		body, err := req.GetBody()
+		if err != nil {
+			return nil, err
+		}
+		newReq := *req
+		newReq.Body = body
+		return &newReq, nil
+	}
+
+	// The Request.Body can't reset back to the beginning, but we
+	// don't seem to have started to read from it yet, so reuse
+	// the request directly. The "afterBodyWrite" means the
+	// bodyWrite process has started, which becomes true before
+	// the first Read.
+	if !afterBodyWrite {
+		return req, nil
+	}
+
+	return nil, fmt.Errorf("http2: Transport: cannot retry err [%v] after Request.Body was written; define Request.GetBody to avoid this error", err)
+}
+
+func canRetryError(err error) bool {
+	if err == errClientConnUnusable || err == errClientConnGotGoAway {
+		return true
+	}
+	if se, ok := err.(StreamError); ok {
+		return se.Code == ErrCodeRefusedStream
+	}
+	return false
+}
+
+func (t *Transport) dialClientConn(addr string, singleUse bool) (*ClientConn, error) {
+	host, _, err := net.SplitHostPort(addr)
+	if err != nil {
+		return nil, err
+	}
+	tconn, err := t.dialTLS()("tcp", addr, t.newTLSConfig(host))
+	if err != nil {
+		return nil, err
+	}
+	return t.newClientConn(tconn, singleUse)
+}
+
+func (t *Transport) newTLSConfig(host string) *tls.Config {
+	cfg := new(tls.Config)
+	if t.TLSClientConfig != nil {
+		*cfg = *t.TLSClientConfig.Clone()
+	}
+	if !strSliceContains(cfg.NextProtos, NextProtoTLS) {
+		cfg.NextProtos = append([]string{NextProtoTLS}, cfg.NextProtos...)
+	}
+	if cfg.ServerName == "" {
+		cfg.ServerName = host
+	}
+	return cfg
+}
+
+func (t *Transport) dialTLS() func(string, string, *tls.Config) (net.Conn, error) {
+	if t.DialTLS != nil {
+		return t.DialTLS
+	}
+	return t.dialTLSDefault
+}
+
+func (t *Transport) dialTLSDefault(network, addr string, cfg *tls.Config) (net.Conn, error) {
+	cn, err := tls.Dial(network, addr, cfg)
+	if err != nil {
+		return nil, err
+	}
+	if err := cn.Handshake(); err != nil {
+		return nil, err
+	}
+	if !cfg.InsecureSkipVerify {
+		if err := cn.VerifyHostname(cfg.ServerName); err != nil {
+			return nil, err
+		}
+	}
+	state := cn.ConnectionState()
+	if p := state.NegotiatedProtocol; p != NextProtoTLS {
+		return nil, fmt.Errorf("http2: unexpected ALPN protocol %q; want %q", p, NextProtoTLS)
+	}
+	if !state.NegotiatedProtocolIsMutual {
+		return nil, errors.New("http2: could not negotiate protocol mutually")
+	}
+	return cn, nil
+}
+
+// disableKeepAlives reports whether connections should be closed as
+// soon as possible after handling the first request.
+func (t *Transport) disableKeepAlives() bool {
+	return t.t1 != nil && t.t1.DisableKeepAlives
+}
+
+func (t *Transport) expectContinueTimeout() time.Duration {
+	if t.t1 == nil {
+		return 0
+	}
+	return t.t1.ExpectContinueTimeout
+}
+
+func (t *Transport) NewClientConn(c net.Conn) (*ClientConn, error) {
+	return t.newClientConn(c, t.disableKeepAlives())
+}
+
+func (t *Transport) newClientConn(c net.Conn, singleUse bool) (*ClientConn, error) {
+	cc := &ClientConn{
+		t:                     t,
+		tconn:                 c,
+		readerDone:            make(chan struct{}),
+		nextStreamID:          1,
+		maxFrameSize:          16 << 10,           // spec default
+		initialWindowSize:     65535,              // spec default
+		maxConcurrentStreams:  1000,               // "infinite", per spec. 1000 seems good enough.
+		peerMaxHeaderListSize: 0xffffffffffffffff, // "infinite", per spec. Use 2^64-1 instead.
+		streams:               make(map[uint32]*clientStream),
+		singleUse:             singleUse,
+		wantSettingsAck:       true,
+		pings:                 make(map[[8]byte]chan struct{}),
+	}
+	if d := t.idleConnTimeout(); d != 0 {
+		cc.idleTimeout = d
+		cc.idleTimer = time.AfterFunc(d, cc.onIdleTimeout)
+	}
+	if VerboseLogs {
+		t.vlogf("http2: Transport creating client conn %p to %v", cc, c.RemoteAddr())
+	}
+
+	cc.cond = sync.NewCond(&cc.mu)
+	cc.flow.add(int32(initialWindowSize))
+
+	// TODO: adjust this writer size to account for frame size +
+	// MTU + crypto/tls record padding.
+	cc.bw = bufio.NewWriter(stickyErrWriter{c, &cc.werr})
+	cc.br = bufio.NewReader(c)
+	cc.fr = NewFramer(cc.bw, cc.br)
+	cc.fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
+	cc.fr.MaxHeaderListSize = t.maxHeaderListSize()
+
+	// TODO: SetMaxDynamicTableSize, SetMaxDynamicTableSizeLimit on
+	// henc in response to SETTINGS frames?
+	cc.henc = hpack.NewEncoder(&cc.hbuf)
+
+	if t.AllowHTTP {
+		cc.nextStreamID = 3
+	}
+
+	if cs, ok := c.(connectionStater); ok {
+		state := cs.ConnectionState()
+		cc.tlsState = &state
+	}
+
+	initialSettings := []Setting{
+		{ID: SettingEnablePush, Val: 0},
+		{ID: SettingInitialWindowSize, Val: transportDefaultStreamFlow},
+	}
+	if max := t.maxHeaderListSize(); max != 0 {
+		initialSettings = append(initialSettings, Setting{ID: SettingMaxHeaderListSize, Val: max})
+	}
+
+	cc.bw.Write(clientPreface)
+	cc.fr.WriteSettings(initialSettings...)
+	cc.fr.WriteWindowUpdate(0, transportDefaultConnFlow)
+	cc.inflow.add(transportDefaultConnFlow + initialWindowSize)
+	cc.bw.Flush()
+	if cc.werr != nil {
+		return nil, cc.werr
+	}
+
+	go cc.readLoop()
+	return cc, nil
+}
+
+func (cc *ClientConn) setGoAway(f *GoAwayFrame) {
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+
+	old := cc.goAway
+	cc.goAway = f
+
+	// Merge the previous and current GoAway error frames.
+	if cc.goAwayDebug == "" {
+		cc.goAwayDebug = string(f.DebugData())
+	}
+	if old != nil && old.ErrCode != ErrCodeNo {
+		cc.goAway.ErrCode = old.ErrCode
+	}
+	last := f.LastStreamID
+	for streamID, cs := range cc.streams {
+		if streamID > last {
+			select {
+			case cs.resc <- resAndError{err: errClientConnGotGoAway}:
+			default:
+			}
+		}
+	}
+}
+
+// CanTakeNewRequest reports whether the connection can take a new request,
+// meaning it has not been closed or received or sent a GOAWAY.
+func (cc *ClientConn) CanTakeNewRequest() bool {
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	return cc.canTakeNewRequestLocked()
+}
+
+// clientConnIdleState describes the suitability of a client
+// connection to initiate a new RoundTrip request.
+type clientConnIdleState struct {
+	canTakeNewRequest bool
+	freshConn         bool // whether it's unused by any previous request
+}
+
+func (cc *ClientConn) idleState() clientConnIdleState {
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	return cc.idleStateLocked()
+}
+
+func (cc *ClientConn) idleStateLocked() (st clientConnIdleState) {
+	if cc.singleUse && cc.nextStreamID > 1 {
+		return
+	}
+	var maxConcurrentOkay bool
+	if cc.t.StrictMaxConcurrentStreams {
+		// We'll tell the caller we can take a new request to
+		// prevent the caller from dialing a new TCP
+		// connection, but then we'll block later before
+		// writing it.
+		maxConcurrentOkay = true
+	} else {
+		maxConcurrentOkay = int64(len(cc.streams)+1) < int64(cc.maxConcurrentStreams)
+	}
+
+	st.canTakeNewRequest = cc.goAway == nil && !cc.closed && !cc.closing && maxConcurrentOkay &&
+		int64(cc.nextStreamID)+2*int64(cc.pendingRequests) < math.MaxInt32 &&
+		!cc.tooIdleLocked()
+	st.freshConn = cc.nextStreamID == 1 && st.canTakeNewRequest
+	return
+}
+
+func (cc *ClientConn) canTakeNewRequestLocked() bool {
+	st := cc.idleStateLocked()
+	return st.canTakeNewRequest
+}
+
+// tooIdleLocked reports whether this connection has been been sitting idle
+// for too much wall time.
+func (cc *ClientConn) tooIdleLocked() bool {
+	// The Round(0) strips the monontonic clock reading so the
+	// times are compared based on their wall time. We don't want
+	// to reuse a connection that's been sitting idle during
+	// VM/laptop suspend if monotonic time was also frozen.
+	return cc.idleTimeout != 0 && !cc.lastIdle.IsZero() && time.Since(cc.lastIdle.Round(0)) > cc.idleTimeout
+}
+
+// onIdleTimeout is called from a time.AfterFunc goroutine. It will
+// only be called when we're idle, but because we're coming from a new
+// goroutine, there could be a new request coming in at the same time,
+// so this simply calls the synchronized closeIfIdle to shut down this
+// connection. The timer could just call closeIfIdle, but this is more
+// clear.
+func (cc *ClientConn) onIdleTimeout() {
+	cc.closeIfIdle()
+}
+
+func (cc *ClientConn) closeIfIdle() {
+	cc.mu.Lock()
+	if len(cc.streams) > 0 {
+		cc.mu.Unlock()
+		return
+	}
+	cc.closed = true
+	nextID := cc.nextStreamID
+	// TODO: do clients send GOAWAY too? maybe? Just Close:
+	cc.mu.Unlock()
+
+	if VerboseLogs {
+		cc.vlogf("http2: Transport closing idle conn %p (forSingleUse=%v, maxStream=%v)", cc, cc.singleUse, nextID-2)
+	}
+	cc.tconn.Close()
+}
+
+var shutdownEnterWaitStateHook = func() {}
+
+// Shutdown gracefully close the client connection, waiting for running streams to complete.
+func (cc *ClientConn) Shutdown(ctx context.Context) error {
+	if err := cc.sendGoAway(); err != nil {
+		return err
+	}
+	// Wait for all in-flight streams to complete or connection to close
+	done := make(chan error, 1)
+	cancelled := false // guarded by cc.mu
+	go func() {
+		cc.mu.Lock()
+		defer cc.mu.Unlock()
+		for {
+			if len(cc.streams) == 0 || cc.closed {
+				cc.closed = true
+				done <- cc.tconn.Close()
+				break
+			}
+			if cancelled {
+				break
+			}
+			cc.cond.Wait()
+		}
+	}()
+	shutdownEnterWaitStateHook()
+	select {
+	case err := <-done:
+		return err
+	case <-ctx.Done():
+		cc.mu.Lock()
+		// Free the goroutine above
+		cancelled = true
+		cc.cond.Broadcast()
+		cc.mu.Unlock()
+		return ctx.Err()
+	}
+}
+
+func (cc *ClientConn) sendGoAway() error {
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	cc.wmu.Lock()
+	defer cc.wmu.Unlock()
+	if cc.closing {
+		// GOAWAY sent already
+		return nil
+	}
+	// Send a graceful shutdown frame to server
+	maxStreamID := cc.nextStreamID
+	if err := cc.fr.WriteGoAway(maxStreamID, ErrCodeNo, nil); err != nil {
+		return err
+	}
+	if err := cc.bw.Flush(); err != nil {
+		return err
+	}
+	// Prevent new requests
+	cc.closing = true
+	return nil
+}
+
+// Close closes the client connection immediately.
+//
+// In-flight requests are interrupted. For a graceful shutdown, use Shutdown instead.
+func (cc *ClientConn) Close() error {
+	cc.mu.Lock()
+	defer cc.cond.Broadcast()
+	defer cc.mu.Unlock()
+	err := errors.New("http2: client connection force closed via ClientConn.Close")
+	for id, cs := range cc.streams {
+		select {
+		case cs.resc <- resAndError{err: err}:
+		default:
+		}
+		cs.bufPipe.CloseWithError(err)
+		delete(cc.streams, id)
+	}
+	cc.closed = true
+	return cc.tconn.Close()
+}
+
+const maxAllocFrameSize = 512 << 10
+
+// frameBuffer returns a scratch buffer suitable for writing DATA frames.
+// They're capped at the min of the peer's max frame size or 512KB
+// (kinda arbitrarily), but definitely capped so we don't allocate 4GB
+// bufers.
+func (cc *ClientConn) frameScratchBuffer() []byte {
+	cc.mu.Lock()
+	size := cc.maxFrameSize
+	if size > maxAllocFrameSize {
+		size = maxAllocFrameSize
+	}
+	for i, buf := range cc.freeBuf {
+		if len(buf) >= int(size) {
+			cc.freeBuf[i] = nil
+			cc.mu.Unlock()
+			return buf[:size]
+		}
+	}
+	cc.mu.Unlock()
+	return make([]byte, size)
+}
+
+func (cc *ClientConn) putFrameScratchBuffer(buf []byte) {
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	const maxBufs = 4 // arbitrary; 4 concurrent requests per conn? investigate.
+	if len(cc.freeBuf) < maxBufs {
+		cc.freeBuf = append(cc.freeBuf, buf)
+		return
+	}
+	for i, old := range cc.freeBuf {
+		if old == nil {
+			cc.freeBuf[i] = buf
+			return
+		}
+	}
+	// forget about it.
+}
+
+// errRequestCanceled is a copy of net/http's errRequestCanceled because it's not
+// exported. At least they'll be DeepEqual for h1-vs-h2 comparisons tests.
+var errRequestCanceled = errors.New("net/http: request canceled")
+
+func commaSeparatedTrailers(req *http.Request) (string, error) {
+	keys := make([]string, 0, len(req.Trailer))
+	for k := range req.Trailer {
+		k = http.CanonicalHeaderKey(k)
+		switch k {
+		case "Transfer-Encoding", "Trailer", "Content-Length":
+			return "", &badStringError{"invalid Trailer key", k}
+		}
+		keys = append(keys, k)
+	}
+	if len(keys) > 0 {
+		sort.Strings(keys)
+		return strings.Join(keys, ","), nil
+	}
+	return "", nil
+}
+
+func (cc *ClientConn) responseHeaderTimeout() time.Duration {
+	if cc.t.t1 != nil {
+		return cc.t.t1.ResponseHeaderTimeout
+	}
+	// No way to do this (yet?) with just an http2.Transport. Probably
+	// no need. Request.Cancel this is the new way. We only need to support
+	// this for compatibility with the old http.Transport fields when
+	// we're doing transparent http2.
+	return 0
+}
+
+// checkConnHeaders checks whether req has any invalid connection-level headers.
+// per RFC 7540 section 8.1.2.2: Connection-Specific Header Fields.
+// Certain headers are special-cased as okay but not transmitted later.
+func checkConnHeaders(req *http.Request) error {
+	if v := req.Header.Get("Upgrade"); v != "" {
+		return fmt.Errorf("http2: invalid Upgrade request header: %q", req.Header["Upgrade"])
+	}
+	if vv := req.Header["Transfer-Encoding"]; len(vv) > 0 && (len(vv) > 1 || vv[0] != "" && vv[0] != "chunked") {
+		return fmt.Errorf("http2: invalid Transfer-Encoding request header: %q", vv)
+	}
+	if vv := req.Header["Connection"]; len(vv) > 0 && (len(vv) > 1 || vv[0] != "" && !strings.EqualFold(vv[0], "close") && !strings.EqualFold(vv[0], "keep-alive")) {
+		return fmt.Errorf("http2: invalid Connection request header: %q", vv)
+	}
+	return nil
+}
+
+// actualContentLength returns a sanitized version of
+// req.ContentLength, where 0 actually means zero (not unknown) and -1
+// means unknown.
+func actualContentLength(req *http.Request) int64 {
+	if req.Body == nil || req.Body == http.NoBody {
+		return 0
+	}
+	if req.ContentLength != 0 {
+		return req.ContentLength
+	}
+	return -1
+}
+
+func (cc *ClientConn) RoundTrip(req *http.Request) (*http.Response, error) {
+	resp, _, err := cc.roundTrip(req)
+	return resp, err
+}
+
+func (cc *ClientConn) roundTrip(req *http.Request) (res *http.Response, gotErrAfterReqBodyWrite bool, err error) {
+	if err := checkConnHeaders(req); err != nil {
+		return nil, false, err
+	}
+	if cc.idleTimer != nil {
+		cc.idleTimer.Stop()
+	}
+
+	trailers, err := commaSeparatedTrailers(req)
+	if err != nil {
+		return nil, false, err
+	}
+	hasTrailers := trailers != ""
+
+	cc.mu.Lock()
+	if err := cc.awaitOpenSlotForRequest(req); err != nil {
+		cc.mu.Unlock()
+		return nil, false, err
+	}
+
+	body := req.Body
+	contentLen := actualContentLength(req)
+	hasBody := contentLen != 0
+
+	// TODO(bradfitz): this is a copy of the logic in net/http. Unify somewhere?
+	var requestedGzip bool
+	if !cc.t.disableCompression() &&
+		req.Header.Get("Accept-Encoding") == "" &&
+		req.Header.Get("Range") == "" &&
+		req.Method != "HEAD" {
+		// Request gzip only, not deflate. Deflate is ambiguous and
+		// not as universally supported anyway.
+		// See: https://zlib.net/zlib_faq.html#faq39
+		//
+		// Note that we don't request this for HEAD requests,
+		// due to a bug in nginx:
+		//   http://trac.nginx.org/nginx/ticket/358
+		//   https://golang.org/issue/5522
+		//
+		// We don't request gzip if the request is for a range, since
+		// auto-decoding a portion of a gzipped document will just fail
+		// anyway. See https://golang.org/issue/8923
+		requestedGzip = true
+	}
+
+	// we send: HEADERS{1}, CONTINUATION{0,} + DATA{0,} (DATA is
+	// sent by writeRequestBody below, along with any Trailers,
+	// again in form HEADERS{1}, CONTINUATION{0,})
+	hdrs, err := cc.encodeHeaders(req, requestedGzip, trailers, contentLen)
+	if err != nil {
+		cc.mu.Unlock()
+		return nil, false, err
+	}
+
+	cs := cc.newStream()
+	cs.req = req
+	cs.trace = httptrace.ContextClientTrace(req.Context())
+	cs.requestedGzip = requestedGzip
+	bodyWriter := cc.t.getBodyWriterState(cs, body)
+	cs.on100 = bodyWriter.on100
+
+	cc.wmu.Lock()
+	endStream := !hasBody && !hasTrailers
+	werr := cc.writeHeaders(cs.ID, endStream, int(cc.maxFrameSize), hdrs)
+	cc.wmu.Unlock()
+	traceWroteHeaders(cs.trace)
+	cc.mu.Unlock()
+
+	if werr != nil {
+		if hasBody {
+			req.Body.Close() // per RoundTripper contract
+			bodyWriter.cancel()
+		}
+		cc.forgetStreamID(cs.ID)
+		// Don't bother sending a RST_STREAM (our write already failed;
+		// no need to keep writing)
+		traceWroteRequest(cs.trace, werr)
+		return nil, false, werr
+	}
+
+	var respHeaderTimer <-chan time.Time
+	if hasBody {
+		bodyWriter.scheduleBodyWrite()
+	} else {
+		traceWroteRequest(cs.trace, nil)
+		if d := cc.responseHeaderTimeout(); d != 0 {
+			timer := time.NewTimer(d)
+			defer timer.Stop()
+			respHeaderTimer = timer.C
+		}
+	}
+
+	readLoopResCh := cs.resc
+	bodyWritten := false
+	ctx := req.Context()
+
+	handleReadLoopResponse := func(re resAndError) (*http.Response, bool, error) {
+		res := re.res
+		if re.err != nil || res.StatusCode > 299 {
+			// On error or status code 3xx, 4xx, 5xx, etc abort any
+			// ongoing write, assuming that the server doesn't care
+			// about our request body. If the server replied with 1xx or
+			// 2xx, however, then assume the server DOES potentially
+			// want our body (e.g. full-duplex streaming:
+			// golang.org/issue/13444). If it turns out the server
+			// doesn't, they'll RST_STREAM us soon enough. This is a
+			// heuristic to avoid adding knobs to Transport. Hopefully
+			// we can keep it.
+			bodyWriter.cancel()
+			cs.abortRequestBodyWrite(errStopReqBodyWrite)
+		}
+		if re.err != nil {
+			cc.forgetStreamID(cs.ID)
+			return nil, cs.getStartedWrite(), re.err
+		}
+		res.Request = req
+		res.TLS = cc.tlsState
+		return res, false, nil
+	}
+
+	for {
+		select {
+		case re := <-readLoopResCh:
+			return handleReadLoopResponse(re)
+		case <-respHeaderTimer:
+			if !hasBody || bodyWritten {
+				cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+			} else {
+				bodyWriter.cancel()
+				cs.abortRequestBodyWrite(errStopReqBodyWriteAndCancel)
+			}
+			cc.forgetStreamID(cs.ID)
+			return nil, cs.getStartedWrite(), errTimeout
+		case <-ctx.Done():
+			if !hasBody || bodyWritten {
+				cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+			} else {
+				bodyWriter.cancel()
+				cs.abortRequestBodyWrite(errStopReqBodyWriteAndCancel)
+			}
+			cc.forgetStreamID(cs.ID)
+			return nil, cs.getStartedWrite(), ctx.Err()
+		case <-req.Cancel:
+			if !hasBody || bodyWritten {
+				cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+			} else {
+				bodyWriter.cancel()
+				cs.abortRequestBodyWrite(errStopReqBodyWriteAndCancel)
+			}
+			cc.forgetStreamID(cs.ID)
+			return nil, cs.getStartedWrite(), errRequestCanceled
+		case <-cs.peerReset:
+			// processResetStream already removed the
+			// stream from the streams map; no need for
+			// forgetStreamID.
+			return nil, cs.getStartedWrite(), cs.resetErr
+		case err := <-bodyWriter.resc:
+			// Prefer the read loop's response, if available. Issue 16102.
+			select {
+			case re := <-readLoopResCh:
+				return handleReadLoopResponse(re)
+			default:
+			}
+			if err != nil {
+				cc.forgetStreamID(cs.ID)
+				return nil, cs.getStartedWrite(), err
+			}
+			bodyWritten = true
+			if d := cc.responseHeaderTimeout(); d != 0 {
+				timer := time.NewTimer(d)
+				defer timer.Stop()
+				respHeaderTimer = timer.C
+			}
+		}
+	}
+}
+
+// awaitOpenSlotForRequest waits until len(streams) < maxConcurrentStreams.
+// Must hold cc.mu.
+func (cc *ClientConn) awaitOpenSlotForRequest(req *http.Request) error {
+	var waitingForConn chan struct{}
+	var waitingForConnErr error // guarded by cc.mu
+	for {
+		cc.lastActive = time.Now()
+		if cc.closed || !cc.canTakeNewRequestLocked() {
+			if waitingForConn != nil {
+				close(waitingForConn)
+			}
+			return errClientConnUnusable
+		}
+		cc.lastIdle = time.Time{}
+		if int64(len(cc.streams))+1 <= int64(cc.maxConcurrentStreams) {
+			if waitingForConn != nil {
+				close(waitingForConn)
+			}
+			return nil
+		}
+		// Unfortunately, we cannot wait on a condition variable and channel at
+		// the same time, so instead, we spin up a goroutine to check if the
+		// request is canceled while we wait for a slot to open in the connection.
+		if waitingForConn == nil {
+			waitingForConn = make(chan struct{})
+			go func() {
+				if err := awaitRequestCancel(req, waitingForConn); err != nil {
+					cc.mu.Lock()
+					waitingForConnErr = err
+					cc.cond.Broadcast()
+					cc.mu.Unlock()
+				}
+			}()
+		}
+		cc.pendingRequests++
+		cc.cond.Wait()
+		cc.pendingRequests--
+		if waitingForConnErr != nil {
+			return waitingForConnErr
+		}
+	}
+}
+
+// requires cc.wmu be held
+func (cc *ClientConn) writeHeaders(streamID uint32, endStream bool, maxFrameSize int, hdrs []byte) error {
+	first := true // first frame written (HEADERS is first, then CONTINUATION)
+	for len(hdrs) > 0 && cc.werr == nil {
+		chunk := hdrs
+		if len(chunk) > maxFrameSize {
+			chunk = chunk[:maxFrameSize]
+		}
+		hdrs = hdrs[len(chunk):]
+		endHeaders := len(hdrs) == 0
+		if first {
+			cc.fr.WriteHeaders(HeadersFrameParam{
+				StreamID:      streamID,
+				BlockFragment: chunk,
+				EndStream:     endStream,
+				EndHeaders:    endHeaders,
+			})
+			first = false
+		} else {
+			cc.fr.WriteContinuation(streamID, endHeaders, chunk)
+		}
+	}
+	// TODO(bradfitz): this Flush could potentially block (as
+	// could the WriteHeaders call(s) above), which means they
+	// wouldn't respond to Request.Cancel being readable. That's
+	// rare, but this should probably be in a goroutine.
+	cc.bw.Flush()
+	return cc.werr
+}
+
+// internal error values; they don't escape to callers
+var (
+	// abort request body write; don't send cancel
+	errStopReqBodyWrite = errors.New("http2: aborting request body write")
+
+	// abort request body write, but send stream reset of cancel.
+	errStopReqBodyWriteAndCancel = errors.New("http2: canceling request")
+
+	errReqBodyTooLong = errors.New("http2: request body larger than specified content length")
+)
+
+func (cs *clientStream) writeRequestBody(body io.Reader, bodyCloser io.Closer) (err error) {
+	cc := cs.cc
+	sentEnd := false // whether we sent the final DATA frame w/ END_STREAM
+	buf := cc.frameScratchBuffer()
+	defer cc.putFrameScratchBuffer(buf)
+
+	defer func() {
+		traceWroteRequest(cs.trace, err)
+		// TODO: write h12Compare test showing whether
+		// Request.Body is closed by the Transport,
+		// and in multiple cases: server replies <=299 and >299
+		// while still writing request body
+		cerr := bodyCloser.Close()
+		if err == nil {
+			err = cerr
+		}
+	}()
+
+	req := cs.req
+	hasTrailers := req.Trailer != nil
+	remainLen := actualContentLength(req)
+	hasContentLen := remainLen != -1
+
+	var sawEOF bool
+	for !sawEOF {
+		n, err := body.Read(buf[:len(buf)-1])
+		if hasContentLen {
+			remainLen -= int64(n)
+			if remainLen == 0 && err == nil {
+				// The request body's Content-Length was predeclared and
+				// we just finished reading it all, but the underlying io.Reader
+				// returned the final chunk with a nil error (which is one of
+				// the two valid things a Reader can do at EOF). Because we'd prefer
+				// to send the END_STREAM bit early, double-check that we're actually
+				// at EOF. Subsequent reads should return (0, EOF) at this point.
+				// If either value is different, we return an error in one of two ways below.
+				var n1 int
+				n1, err = body.Read(buf[n:])
+				remainLen -= int64(n1)
+			}
+			if remainLen < 0 {
+				err = errReqBodyTooLong
+				cc.writeStreamReset(cs.ID, ErrCodeCancel, err)
+				return err
+			}
+		}
+		if err == io.EOF {
+			sawEOF = true
+			err = nil
+		} else if err != nil {
+			cc.writeStreamReset(cs.ID, ErrCodeCancel, err)
+			return err
+		}
+
+		remain := buf[:n]
+		for len(remain) > 0 && err == nil {
+			var allowed int32
+			allowed, err = cs.awaitFlowControl(len(remain))
+			switch {
+			case err == errStopReqBodyWrite:
+				return err
+			case err == errStopReqBodyWriteAndCancel:
+				cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+				return err
+			case err != nil:
+				return err
+			}
+			cc.wmu.Lock()
+			data := remain[:allowed]
+			remain = remain[allowed:]
+			sentEnd = sawEOF && len(remain) == 0 && !hasTrailers
+			err = cc.fr.WriteData(cs.ID, sentEnd, data)
+			if err == nil {
+				// TODO(bradfitz): this flush is for latency, not bandwidth.
+				// Most requests won't need this. Make this opt-in or
+				// opt-out?  Use some heuristic on the body type? Nagel-like
+				// timers?  Based on 'n'? Only last chunk of this for loop,
+				// unless flow control tokens are low? For now, always.
+				// If we change this, see comment below.
+				err = cc.bw.Flush()
+			}
+			cc.wmu.Unlock()
+		}
+		if err != nil {
+			return err
+		}
+	}
+
+	if sentEnd {
+		// Already sent END_STREAM (which implies we have no
+		// trailers) and flushed, because currently all
+		// WriteData frames above get a flush. So we're done.
+		return nil
+	}
+
+	var trls []byte
+	if hasTrailers {
+		cc.mu.Lock()
+		trls, err = cc.encodeTrailers(req)
+		cc.mu.Unlock()
+		if err != nil {
+			cc.writeStreamReset(cs.ID, ErrCodeInternal, err)
+			cc.forgetStreamID(cs.ID)
+			return err
+		}
+	}
+
+	cc.mu.Lock()
+	maxFrameSize := int(cc.maxFrameSize)
+	cc.mu.Unlock()
+
+	cc.wmu.Lock()
+	defer cc.wmu.Unlock()
+
+	// Two ways to send END_STREAM: either with trailers, or
+	// with an empty DATA frame.
+	if len(trls) > 0 {
+		err = cc.writeHeaders(cs.ID, true, maxFrameSize, trls)
+	} else {
+		err = cc.fr.WriteData(cs.ID, true, nil)
+	}
+	if ferr := cc.bw.Flush(); ferr != nil && err == nil {
+		err = ferr
+	}
+	return err
+}
+
+// awaitFlowControl waits for [1, min(maxBytes, cc.cs.maxFrameSize)] flow
+// control tokens from the server.
+// It returns either the non-zero number of tokens taken or an error
+// if the stream is dead.
+func (cs *clientStream) awaitFlowControl(maxBytes int) (taken int32, err error) {
+	cc := cs.cc
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	for {
+		if cc.closed {
+			return 0, errClientConnClosed
+		}
+		if cs.stopReqBody != nil {
+			return 0, cs.stopReqBody
+		}
+		if err := cs.checkResetOrDone(); err != nil {
+			return 0, err
+		}
+		if a := cs.flow.available(); a > 0 {
+			take := a
+			if int(take) > maxBytes {
+
+				take = int32(maxBytes) // can't truncate int; take is int32
+			}
+			if take > int32(cc.maxFrameSize) {
+				take = int32(cc.maxFrameSize)
+			}
+			cs.flow.take(take)
+			return take, nil
+		}
+		cc.cond.Wait()
+	}
+}
+
+type badStringError struct {
+	what string
+	str  string
+}
+
+func (e *badStringError) Error() string { return fmt.Sprintf("%s %q", e.what, e.str) }
+
+// requires cc.mu be held.
+func (cc *ClientConn) encodeHeaders(req *http.Request, addGzipHeader bool, trailers string, contentLength int64) ([]byte, error) {
+	cc.hbuf.Reset()
+
+	host := req.Host
+	if host == "" {
+		host = req.URL.Host
+	}
+	host, err := httpguts.PunycodeHostPort(host)
+	if err != nil {
+		return nil, err
+	}
+
+	var path string
+	if req.Method != "CONNECT" {
+		path = req.URL.RequestURI()
+		if !validPseudoPath(path) {
+			orig := path
+			path = strings.TrimPrefix(path, req.URL.Scheme+"://"+host)
+			if !validPseudoPath(path) {
+				if req.URL.Opaque != "" {
+					return nil, fmt.Errorf("invalid request :path %q from URL.Opaque = %q", orig, req.URL.Opaque)
+				} else {
+					return nil, fmt.Errorf("invalid request :path %q", orig)
+				}
+			}
+		}
+	}
+
+	// Check for any invalid headers and return an error before we
+	// potentially pollute our hpack state. (We want to be able to
+	// continue to reuse the hpack encoder for future requests)
+	for k, vv := range req.Header {
+		if !httpguts.ValidHeaderFieldName(k) {
+			return nil, fmt.Errorf("invalid HTTP header name %q", k)
+		}
+		for _, v := range vv {
+			if !httpguts.ValidHeaderFieldValue(v) {
+				return nil, fmt.Errorf("invalid HTTP header value %q for header %q", v, k)
+			}
+		}
+	}
+
+	enumerateHeaders := func(f func(name, value string)) {
+		// 8.1.2.3 Request Pseudo-Header Fields
+		// The :path pseudo-header field includes the path and query parts of the
+		// target URI (the path-absolute production and optionally a '?' character
+		// followed by the query production (see Sections 3.3 and 3.4 of
+		// [RFC3986]).
+		f(":authority", host)
+		m := req.Method
+		if m == "" {
+			m = http.MethodGet
+		}
+		f(":method", m)
+		if req.Method != "CONNECT" {
+			f(":path", path)
+			f(":scheme", req.URL.Scheme)
+		}
+		if trailers != "" {
+			f("trailer", trailers)
+		}
+
+		var didUA bool
+		for k, vv := range req.Header {
+			if strings.EqualFold(k, "host") || strings.EqualFold(k, "content-length") {
+				// Host is :authority, already sent.
+				// Content-Length is automatic, set below.
+				continue
+			} else if strings.EqualFold(k, "connection") || strings.EqualFold(k, "proxy-connection") ||
+				strings.EqualFold(k, "transfer-encoding") || strings.EqualFold(k, "upgrade") ||
+				strings.EqualFold(k, "keep-alive") {
+				// Per 8.1.2.2 Connection-Specific Header
+				// Fields, don't send connection-specific
+				// fields. We have already checked if any
+				// are error-worthy so just ignore the rest.
+				continue
+			} else if strings.EqualFold(k, "user-agent") {
+				// Match Go's http1 behavior: at most one
+				// User-Agent. If set to nil or empty string,
+				// then omit it. Otherwise if not mentioned,
+				// include the default (below).
+				didUA = true
+				if len(vv) < 1 {
+					continue
+				}
+				vv = vv[:1]
+				if vv[0] == "" {
+					continue
+				}
+			} else if strings.EqualFold(k, "cookie") {
+				// Per 8.1.2.5 To allow for better compression efficiency, the
+				// Cookie header field MAY be split into separate header fields,
+				// each with one or more cookie-pairs.
+				for _, v := range vv {
+					for {
+						p := strings.IndexByte(v, ';')
+						if p < 0 {
+							break
+						}
+						f("cookie", v[:p])
+						p++
+						// strip space after semicolon if any.
+						for p+1 <= len(v) && v[p] == ' ' {
+							p++
+						}
+						v = v[p:]
+					}
+					if len(v) > 0 {
+						f("cookie", v)
+					}
+				}
+				continue
+			}
+
+			for _, v := range vv {
+				f(k, v)
+			}
+		}
+		if shouldSendReqContentLength(req.Method, contentLength) {
+			f("content-length", strconv.FormatInt(contentLength, 10))
+		}
+		if addGzipHeader {
+			f("accept-encoding", "gzip")
+		}
+		if !didUA {
+			f("user-agent", defaultUserAgent)
+		}
+	}
+
+	// Do a first pass over the headers counting bytes to ensure
+	// we don't exceed cc.peerMaxHeaderListSize. This is done as a
+	// separate pass before encoding the headers to prevent
+	// modifying the hpack state.
+	hlSize := uint64(0)
+	enumerateHeaders(func(name, value string) {
+		hf := hpack.HeaderField{Name: name, Value: value}
+		hlSize += uint64(hf.Size())
+	})
+
+	if hlSize > cc.peerMaxHeaderListSize {
+		return nil, errRequestHeaderListSize
+	}
+
+	trace := httptrace.ContextClientTrace(req.Context())
+	traceHeaders := traceHasWroteHeaderField(trace)
+
+	// Header list size is ok. Write the headers.
+	enumerateHeaders(func(name, value string) {
+		name = strings.ToLower(name)
+		cc.writeHeader(name, value)
+		if traceHeaders {
+			traceWroteHeaderField(trace, name, value)
+		}
+	})
+
+	return cc.hbuf.Bytes(), nil
+}
+
+// shouldSendReqContentLength reports whether the http2.Transport should send
+// a "content-length" request header. This logic is basically a copy of the net/http
+// transferWriter.shouldSendContentLength.
+// The contentLength is the corrected contentLength (so 0 means actually 0, not unknown).
+// -1 means unknown.
+func shouldSendReqContentLength(method string, contentLength int64) bool {
+	if contentLength > 0 {
+		return true
+	}
+	if contentLength < 0 {
+		return false
+	}
+	// For zero bodies, whether we send a content-length depends on the method.
+	// It also kinda doesn't matter for http2 either way, with END_STREAM.
+	switch method {
+	case "POST", "PUT", "PATCH":
+		return true
+	default:
+		return false
+	}
+}
+
+// requires cc.mu be held.
+func (cc *ClientConn) encodeTrailers(req *http.Request) ([]byte, error) {
+	cc.hbuf.Reset()
+
+	hlSize := uint64(0)
+	for k, vv := range req.Trailer {
+		for _, v := range vv {
+			hf := hpack.HeaderField{Name: k, Value: v}
+			hlSize += uint64(hf.Size())
+		}
+	}
+	if hlSize > cc.peerMaxHeaderListSize {
+		return nil, errRequestHeaderListSize
+	}
+
+	for k, vv := range req.Trailer {
+		// Transfer-Encoding, etc.. have already been filtered at the
+		// start of RoundTrip
+		lowKey := strings.ToLower(k)
+		for _, v := range vv {
+			cc.writeHeader(lowKey, v)
+		}
+	}
+	return cc.hbuf.Bytes(), nil
+}
+
+func (cc *ClientConn) writeHeader(name, value string) {
+	if VerboseLogs {
+		log.Printf("http2: Transport encoding header %q = %q", name, value)
+	}
+	cc.henc.WriteField(hpack.HeaderField{Name: name, Value: value})
+}
+
+type resAndError struct {
+	res *http.Response
+	err error
+}
+
+// requires cc.mu be held.
+func (cc *ClientConn) newStream() *clientStream {
+	cs := &clientStream{
+		cc:        cc,
+		ID:        cc.nextStreamID,
+		resc:      make(chan resAndError, 1),
+		peerReset: make(chan struct{}),
+		done:      make(chan struct{}),
+	}
+	cs.flow.add(int32(cc.initialWindowSize))
+	cs.flow.setConnFlow(&cc.flow)
+	cs.inflow.add(transportDefaultStreamFlow)
+	cs.inflow.setConnFlow(&cc.inflow)
+	cc.nextStreamID += 2
+	cc.streams[cs.ID] = cs
+	return cs
+}
+
+func (cc *ClientConn) forgetStreamID(id uint32) {
+	cc.streamByID(id, true)
+}
+
+func (cc *ClientConn) streamByID(id uint32, andRemove bool) *clientStream {
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+	cs := cc.streams[id]
+	if andRemove && cs != nil && !cc.closed {
+		cc.lastActive = time.Now()
+		delete(cc.streams, id)
+		if len(cc.streams) == 0 && cc.idleTimer != nil {
+			cc.idleTimer.Reset(cc.idleTimeout)
+			cc.lastIdle = time.Now()
+		}
+		close(cs.done)
+		// Wake up checkResetOrDone via clientStream.awaitFlowControl and
+		// wake up RoundTrip if there is a pending request.
+		cc.cond.Broadcast()
+	}
+	return cs
+}
+
+// clientConnReadLoop is the state owned by the clientConn's frame-reading readLoop.
+type clientConnReadLoop struct {
+	cc            *ClientConn
+	closeWhenIdle bool
+}
+
+// readLoop runs in its own goroutine and reads and dispatches frames.
+func (cc *ClientConn) readLoop() {
+	rl := &clientConnReadLoop{cc: cc}
+	defer rl.cleanup()
+	cc.readerErr = rl.run()
+	if ce, ok := cc.readerErr.(ConnectionError); ok {
+		cc.wmu.Lock()
+		cc.fr.WriteGoAway(0, ErrCode(ce), nil)
+		cc.wmu.Unlock()
+	}
+}
+
+// GoAwayError is returned by the Transport when the server closes the
+// TCP connection after sending a GOAWAY frame.
+type GoAwayError struct {
+	LastStreamID uint32
+	ErrCode      ErrCode
+	DebugData    string
+}
+
+func (e GoAwayError) Error() string {
+	return fmt.Sprintf("http2: server sent GOAWAY and closed the connection; LastStreamID=%v, ErrCode=%v, debug=%q",
+		e.LastStreamID, e.ErrCode, e.DebugData)
+}
+
+func isEOFOrNetReadError(err error) bool {
+	if err == io.EOF {
+		return true
+	}
+	ne, ok := err.(*net.OpError)
+	return ok && ne.Op == "read"
+}
+
+func (rl *clientConnReadLoop) cleanup() {
+	cc := rl.cc
+	defer cc.tconn.Close()
+	defer cc.t.connPool().MarkDead(cc)
+	defer close(cc.readerDone)
+
+	if cc.idleTimer != nil {
+		cc.idleTimer.Stop()
+	}
+
+	// Close any response bodies if the server closes prematurely.
+	// TODO: also do this if we've written the headers but not
+	// gotten a response yet.
+	err := cc.readerErr
+	cc.mu.Lock()
+	if cc.goAway != nil && isEOFOrNetReadError(err) {
+		err = GoAwayError{
+			LastStreamID: cc.goAway.LastStreamID,
+			ErrCode:      cc.goAway.ErrCode,
+			DebugData:    cc.goAwayDebug,
+		}
+	} else if err == io.EOF {
+		err = io.ErrUnexpectedEOF
+	}
+	for _, cs := range cc.streams {
+		cs.bufPipe.CloseWithError(err) // no-op if already closed
+		select {
+		case cs.resc <- resAndError{err: err}:
+		default:
+		}
+		close(cs.done)
+	}
+	cc.closed = true
+	cc.cond.Broadcast()
+	cc.mu.Unlock()
+}
+
+func (rl *clientConnReadLoop) run() error {
+	cc := rl.cc
+	rl.closeWhenIdle = cc.t.disableKeepAlives() || cc.singleUse
+	gotReply := false // ever saw a HEADERS reply
+	gotSettings := false
+	for {
+		f, err := cc.fr.ReadFrame()
+		if err != nil {
+			cc.vlogf("http2: Transport readFrame error on conn %p: (%T) %v", cc, err, err)
+		}
+		if se, ok := err.(StreamError); ok {
+			if cs := cc.streamByID(se.StreamID, false); cs != nil {
+				cs.cc.writeStreamReset(cs.ID, se.Code, err)
+				cs.cc.forgetStreamID(cs.ID)
+				if se.Cause == nil {
+					se.Cause = cc.fr.errDetail
+				}
+				rl.endStreamError(cs, se)
+			}
+			continue
+		} else if err != nil {
+			return err
+		}
+		if VerboseLogs {
+			cc.vlogf("http2: Transport received %s", summarizeFrame(f))
+		}
+		if !gotSettings {
+			if _, ok := f.(*SettingsFrame); !ok {
+				cc.logf("protocol error: received %T before a SETTINGS frame", f)
+				return ConnectionError(ErrCodeProtocol)
+			}
+			gotSettings = true
+		}
+		maybeIdle := false // whether frame might transition us to idle
+
+		switch f := f.(type) {
+		case *MetaHeadersFrame:
+			err = rl.processHeaders(f)
+			maybeIdle = true
+			gotReply = true
+		case *DataFrame:
+			err = rl.processData(f)
+			maybeIdle = true
+		case *GoAwayFrame:
+			err = rl.processGoAway(f)
+			maybeIdle = true
+		case *RSTStreamFrame:
+			err = rl.processResetStream(f)
+			maybeIdle = true
+		case *SettingsFrame:
+			err = rl.processSettings(f)
+		case *PushPromiseFrame:
+			err = rl.processPushPromise(f)
+		case *WindowUpdateFrame:
+			err = rl.processWindowUpdate(f)
+		case *PingFrame:
+			err = rl.processPing(f)
+		default:
+			cc.logf("Transport: unhandled response frame type %T", f)
+		}
+		if err != nil {
+			if VerboseLogs {
+				cc.vlogf("http2: Transport conn %p received error from processing frame %v: %v", cc, summarizeFrame(f), err)
+			}
+			return err
+		}
+		if rl.closeWhenIdle && gotReply && maybeIdle {
+			cc.closeIfIdle()
+		}
+	}
+}
+
+func (rl *clientConnReadLoop) processHeaders(f *MetaHeadersFrame) error {
+	cc := rl.cc
+	cs := cc.streamByID(f.StreamID, false)
+	if cs == nil {
+		// We'd get here if we canceled a request while the
+		// server had its response still in flight. So if this
+		// was just something we canceled, ignore it.
+		return nil
+	}
+	if f.StreamEnded() {
+		// Issue 20521: If the stream has ended, streamByID() causes
+		// clientStream.done to be closed, which causes the request's bodyWriter
+		// to be closed with an errStreamClosed, which may be received by
+		// clientConn.RoundTrip before the result of processing these headers.
+		// Deferring stream closure allows the header processing to occur first.
+		// clientConn.RoundTrip may still receive the bodyWriter error first, but
+		// the fix for issue 16102 prioritises any response.
+		//
+		// Issue 22413: If there is no request body, we should close the
+		// stream before writing to cs.resc so that the stream is closed
+		// immediately once RoundTrip returns.
+		if cs.req.Body != nil {
+			defer cc.forgetStreamID(f.StreamID)
+		} else {
+			cc.forgetStreamID(f.StreamID)
+		}
+	}
+	if !cs.firstByte {
+		if cs.trace != nil {
+			// TODO(bradfitz): move first response byte earlier,
+			// when we first read the 9 byte header, not waiting
+			// until all the HEADERS+CONTINUATION frames have been
+			// merged. This works for now.
+			traceFirstResponseByte(cs.trace)
+		}
+		cs.firstByte = true
+	}
+	if !cs.pastHeaders {
+		cs.pastHeaders = true
+	} else {
+		return rl.processTrailers(cs, f)
+	}
+
+	res, err := rl.handleResponse(cs, f)
+	if err != nil {
+		if _, ok := err.(ConnectionError); ok {
+			return err
+		}
+		// Any other error type is a stream error.
+		cs.cc.writeStreamReset(f.StreamID, ErrCodeProtocol, err)
+		cc.forgetStreamID(cs.ID)
+		cs.resc <- resAndError{err: err}
+		return nil // return nil from process* funcs to keep conn alive
+	}
+	if res == nil {
+		// (nil, nil) special case. See handleResponse docs.
+		return nil
+	}
+	cs.resTrailer = &res.Trailer
+	cs.resc <- resAndError{res: res}
+	return nil
+}
+
+// may return error types nil, or ConnectionError. Any other error value
+// is a StreamError of type ErrCodeProtocol. The returned error in that case
+// is the detail.
+//
+// As a special case, handleResponse may return (nil, nil) to skip the
+// frame (currently only used for 1xx responses).
+func (rl *clientConnReadLoop) handleResponse(cs *clientStream, f *MetaHeadersFrame) (*http.Response, error) {
+	if f.Truncated {
+		return nil, errResponseHeaderListSize
+	}
+
+	status := f.PseudoValue("status")
+	if status == "" {
+		return nil, errors.New("malformed response from server: missing status pseudo header")
+	}
+	statusCode, err := strconv.Atoi(status)
+	if err != nil {
+		return nil, errors.New("malformed response from server: malformed non-numeric status pseudo header")
+	}
+
+	header := make(http.Header)
+	res := &http.Response{
+		Proto:      "HTTP/2.0",
+		ProtoMajor: 2,
+		Header:     header,
+		StatusCode: statusCode,
+		Status:     status + " " + http.StatusText(statusCode),
+	}
+	for _, hf := range f.RegularFields() {
+		key := http.CanonicalHeaderKey(hf.Name)
+		if key == "Trailer" {
+			t := res.Trailer
+			if t == nil {
+				t = make(http.Header)
+				res.Trailer = t
+			}
+			foreachHeaderElement(hf.Value, func(v string) {
+				t[http.CanonicalHeaderKey(v)] = nil
+			})
+		} else {
+			header[key] = append(header[key], hf.Value)
+		}
+	}
+
+	if statusCode >= 100 && statusCode <= 199 {
+		cs.num1xx++
+		const max1xxResponses = 5 // arbitrary bound on number of informational responses, same as net/http
+		if cs.num1xx > max1xxResponses {
+			return nil, errors.New("http2: too many 1xx informational responses")
+		}
+		if fn := cs.get1xxTraceFunc(); fn != nil {
+			if err := fn(statusCode, textproto.MIMEHeader(header)); err != nil {
+				return nil, err
+			}
+		}
+		if statusCode == 100 {
+			traceGot100Continue(cs.trace)
+			if cs.on100 != nil {
+				cs.on100() // forces any write delay timer to fire
+			}
+		}
+		cs.pastHeaders = false // do it all again
+		return nil, nil
+	}
+
+	streamEnded := f.StreamEnded()
+	isHead := cs.req.Method == "HEAD"
+	if !streamEnded || isHead {
+		res.ContentLength = -1
+		if clens := res.Header["Content-Length"]; len(clens) == 1 {
+			if clen64, err := strconv.ParseInt(clens[0], 10, 64); err == nil {
+				res.ContentLength = clen64
+			} else {
+				// TODO: care? unlike http/1, it won't mess up our framing, so it's
+				// more safe smuggling-wise to ignore.
+			}
+		} else if len(clens) > 1 {
+			// TODO: care? unlike http/1, it won't mess up our framing, so it's
+			// more safe smuggling-wise to ignore.
+		}
+	}
+
+	if streamEnded || isHead {
+		res.Body = noBody
+		return res, nil
+	}
+
+	cs.bufPipe = pipe{b: &dataBuffer{expected: res.ContentLength}}
+	cs.bytesRemain = res.ContentLength
+	res.Body = transportResponseBody{cs}
+	go cs.awaitRequestCancel(cs.req)
+
+	if cs.requestedGzip && res.Header.Get("Content-Encoding") == "gzip" {
+		res.Header.Del("Content-Encoding")
+		res.Header.Del("Content-Length")
+		res.ContentLength = -1
+		res.Body = &gzipReader{body: res.Body}
+		res.Uncompressed = true
+	}
+	return res, nil
+}
+
+func (rl *clientConnReadLoop) processTrailers(cs *clientStream, f *MetaHeadersFrame) error {
+	if cs.pastTrailers {
+		// Too many HEADERS frames for this stream.
+		return ConnectionError(ErrCodeProtocol)
+	}
+	cs.pastTrailers = true
+	if !f.StreamEnded() {
+		// We expect that any headers for trailers also
+		// has END_STREAM.
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if len(f.PseudoFields()) > 0 {
+		// No pseudo header fields are defined for trailers.
+		// TODO: ConnectionError might be overly harsh? Check.
+		return ConnectionError(ErrCodeProtocol)
+	}
+
+	trailer := make(http.Header)
+	for _, hf := range f.RegularFields() {
+		key := http.CanonicalHeaderKey(hf.Name)
+		trailer[key] = append(trailer[key], hf.Value)
+	}
+	cs.trailer = trailer
+
+	rl.endStream(cs)
+	return nil
+}
+
+// transportResponseBody is the concrete type of Transport.RoundTrip's
+// Response.Body. It is an io.ReadCloser. On Read, it reads from cs.body.
+// On Close it sends RST_STREAM if EOF wasn't already seen.
+type transportResponseBody struct {
+	cs *clientStream
+}
+
+func (b transportResponseBody) Read(p []byte) (n int, err error) {
+	cs := b.cs
+	cc := cs.cc
+
+	if cs.readErr != nil {
+		return 0, cs.readErr
+	}
+	n, err = b.cs.bufPipe.Read(p)
+	if cs.bytesRemain != -1 {
+		if int64(n) > cs.bytesRemain {
+			n = int(cs.bytesRemain)
+			if err == nil {
+				err = errors.New("net/http: server replied with more than declared Content-Length; truncated")
+				cc.writeStreamReset(cs.ID, ErrCodeProtocol, err)
+			}
+			cs.readErr = err
+			return int(cs.bytesRemain), err
+		}
+		cs.bytesRemain -= int64(n)
+		if err == io.EOF && cs.bytesRemain > 0 {
+			err = io.ErrUnexpectedEOF
+			cs.readErr = err
+			return n, err
+		}
+	}
+	if n == 0 {
+		// No flow control tokens to send back.
+		return
+	}
+
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+
+	var connAdd, streamAdd int32
+	// Check the conn-level first, before the stream-level.
+	if v := cc.inflow.available(); v < transportDefaultConnFlow/2 {
+		connAdd = transportDefaultConnFlow - v
+		cc.inflow.add(connAdd)
+	}
+	if err == nil { // No need to refresh if the stream is over or failed.
+		// Consider any buffered body data (read from the conn but not
+		// consumed by the client) when computing flow control for this
+		// stream.
+		v := int(cs.inflow.available()) + cs.bufPipe.Len()
+		if v < transportDefaultStreamFlow-transportDefaultStreamMinRefresh {
+			streamAdd = int32(transportDefaultStreamFlow - v)
+			cs.inflow.add(streamAdd)
+		}
+	}
+	if connAdd != 0 || streamAdd != 0 {
+		cc.wmu.Lock()
+		defer cc.wmu.Unlock()
+		if connAdd != 0 {
+			cc.fr.WriteWindowUpdate(0, mustUint31(connAdd))
+		}
+		if streamAdd != 0 {
+			cc.fr.WriteWindowUpdate(cs.ID, mustUint31(streamAdd))
+		}
+		cc.bw.Flush()
+	}
+	return
+}
+
+var errClosedResponseBody = errors.New("http2: response body closed")
+
+func (b transportResponseBody) Close() error {
+	cs := b.cs
+	cc := cs.cc
+
+	serverSentStreamEnd := cs.bufPipe.Err() == io.EOF
+	unread := cs.bufPipe.Len()
+
+	if unread > 0 || !serverSentStreamEnd {
+		cc.mu.Lock()
+		cc.wmu.Lock()
+		if !serverSentStreamEnd {
+			cc.fr.WriteRSTStream(cs.ID, ErrCodeCancel)
+			cs.didReset = true
+		}
+		// Return connection-level flow control.
+		if unread > 0 {
+			cc.inflow.add(int32(unread))
+			cc.fr.WriteWindowUpdate(0, uint32(unread))
+		}
+		cc.bw.Flush()
+		cc.wmu.Unlock()
+		cc.mu.Unlock()
+	}
+
+	cs.bufPipe.BreakWithError(errClosedResponseBody)
+	cc.forgetStreamID(cs.ID)
+	return nil
+}
+
+func (rl *clientConnReadLoop) processData(f *DataFrame) error {
+	cc := rl.cc
+	cs := cc.streamByID(f.StreamID, f.StreamEnded())
+	data := f.Data()
+	if cs == nil {
+		cc.mu.Lock()
+		neverSent := cc.nextStreamID
+		cc.mu.Unlock()
+		if f.StreamID >= neverSent {
+			// We never asked for this.
+			cc.logf("http2: Transport received unsolicited DATA frame; closing connection")
+			return ConnectionError(ErrCodeProtocol)
+		}
+		// We probably did ask for this, but canceled. Just ignore it.
+		// TODO: be stricter here? only silently ignore things which
+		// we canceled, but not things which were closed normally
+		// by the peer? Tough without accumulating too much state.
+
+		// But at least return their flow control:
+		if f.Length > 0 {
+			cc.mu.Lock()
+			cc.inflow.add(int32(f.Length))
+			cc.mu.Unlock()
+
+			cc.wmu.Lock()
+			cc.fr.WriteWindowUpdate(0, uint32(f.Length))
+			cc.bw.Flush()
+			cc.wmu.Unlock()
+		}
+		return nil
+	}
+	if !cs.firstByte {
+		cc.logf("protocol error: received DATA before a HEADERS frame")
+		rl.endStreamError(cs, StreamError{
+			StreamID: f.StreamID,
+			Code:     ErrCodeProtocol,
+		})
+		return nil
+	}
+	if f.Length > 0 {
+		if cs.req.Method == "HEAD" && len(data) > 0 {
+			cc.logf("protocol error: received DATA on a HEAD request")
+			rl.endStreamError(cs, StreamError{
+				StreamID: f.StreamID,
+				Code:     ErrCodeProtocol,
+			})
+			return nil
+		}
+		// Check connection-level flow control.
+		cc.mu.Lock()
+		if cs.inflow.available() >= int32(f.Length) {
+			cs.inflow.take(int32(f.Length))
+		} else {
+			cc.mu.Unlock()
+			return ConnectionError(ErrCodeFlowControl)
+		}
+		// Return any padded flow control now, since we won't
+		// refund it later on body reads.
+		var refund int
+		if pad := int(f.Length) - len(data); pad > 0 {
+			refund += pad
+		}
+		// Return len(data) now if the stream is already closed,
+		// since data will never be read.
+		didReset := cs.didReset
+		if didReset {
+			refund += len(data)
+		}
+		if refund > 0 {
+			cc.inflow.add(int32(refund))
+			cc.wmu.Lock()
+			cc.fr.WriteWindowUpdate(0, uint32(refund))
+			if !didReset {
+				cs.inflow.add(int32(refund))
+				cc.fr.WriteWindowUpdate(cs.ID, uint32(refund))
+			}
+			cc.bw.Flush()
+			cc.wmu.Unlock()
+		}
+		cc.mu.Unlock()
+
+		if len(data) > 0 && !didReset {
+			if _, err := cs.bufPipe.Write(data); err != nil {
+				rl.endStreamError(cs, err)
+				return err
+			}
+		}
+	}
+
+	if f.StreamEnded() {
+		rl.endStream(cs)
+	}
+	return nil
+}
+
+func (rl *clientConnReadLoop) endStream(cs *clientStream) {
+	// TODO: check that any declared content-length matches, like
+	// server.go's (*stream).endStream method.
+	rl.endStreamError(cs, nil)
+}
+
+func (rl *clientConnReadLoop) endStreamError(cs *clientStream, err error) {
+	var code func()
+	if err == nil {
+		err = io.EOF
+		code = cs.copyTrailers
+	}
+	if isConnectionCloseRequest(cs.req) {
+		rl.closeWhenIdle = true
+	}
+	cs.bufPipe.closeWithErrorAndCode(err, code)
+
+	select {
+	case cs.resc <- resAndError{err: err}:
+	default:
+	}
+}
+
+func (cs *clientStream) copyTrailers() {
+	for k, vv := range cs.trailer {
+		t := cs.resTrailer
+		if *t == nil {
+			*t = make(http.Header)
+		}
+		(*t)[k] = vv
+	}
+}
+
+func (rl *clientConnReadLoop) processGoAway(f *GoAwayFrame) error {
+	cc := rl.cc
+	cc.t.connPool().MarkDead(cc)
+	if f.ErrCode != 0 {
+		// TODO: deal with GOAWAY more. particularly the error code
+		cc.vlogf("transport got GOAWAY with error code = %v", f.ErrCode)
+	}
+	cc.setGoAway(f)
+	return nil
+}
+
+func (rl *clientConnReadLoop) processSettings(f *SettingsFrame) error {
+	cc := rl.cc
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+
+	if f.IsAck() {
+		if cc.wantSettingsAck {
+			cc.wantSettingsAck = false
+			return nil
+		}
+		return ConnectionError(ErrCodeProtocol)
+	}
+
+	err := f.ForeachSetting(func(s Setting) error {
+		switch s.ID {
+		case SettingMaxFrameSize:
+			cc.maxFrameSize = s.Val
+		case SettingMaxConcurrentStreams:
+			cc.maxConcurrentStreams = s.Val
+		case SettingMaxHeaderListSize:
+			cc.peerMaxHeaderListSize = uint64(s.Val)
+		case SettingInitialWindowSize:
+			// Values above the maximum flow-control
+			// window size of 2^31-1 MUST be treated as a
+			// connection error (Section 5.4.1) of type
+			// FLOW_CONTROL_ERROR.
+			if s.Val > math.MaxInt32 {
+				return ConnectionError(ErrCodeFlowControl)
+			}
+
+			// Adjust flow control of currently-open
+			// frames by the difference of the old initial
+			// window size and this one.
+			delta := int32(s.Val) - int32(cc.initialWindowSize)
+			for _, cs := range cc.streams {
+				cs.flow.add(delta)
+			}
+			cc.cond.Broadcast()
+
+			cc.initialWindowSize = s.Val
+		default:
+			// TODO(bradfitz): handle more settings? SETTINGS_HEADER_TABLE_SIZE probably.
+			cc.vlogf("Unhandled Setting: %v", s)
+		}
+		return nil
+	})
+	if err != nil {
+		return err
+	}
+
+	cc.wmu.Lock()
+	defer cc.wmu.Unlock()
+
+	cc.fr.WriteSettingsAck()
+	cc.bw.Flush()
+	return cc.werr
+}
+
+func (rl *clientConnReadLoop) processWindowUpdate(f *WindowUpdateFrame) error {
+	cc := rl.cc
+	cs := cc.streamByID(f.StreamID, false)
+	if f.StreamID != 0 && cs == nil {
+		return nil
+	}
+
+	cc.mu.Lock()
+	defer cc.mu.Unlock()
+
+	fl := &cc.flow
+	if cs != nil {
+		fl = &cs.flow
+	}
+	if !fl.add(int32(f.Increment)) {
+		return ConnectionError(ErrCodeFlowControl)
+	}
+	cc.cond.Broadcast()
+	return nil
+}
+
+func (rl *clientConnReadLoop) processResetStream(f *RSTStreamFrame) error {
+	cs := rl.cc.streamByID(f.StreamID, true)
+	if cs == nil {
+		// TODO: return error if server tries to RST_STEAM an idle stream
+		return nil
+	}
+	select {
+	case <-cs.peerReset:
+		// Already reset.
+		// This is the only goroutine
+		// which closes this, so there
+		// isn't a race.
+	default:
+		err := streamError(cs.ID, f.ErrCode)
+		cs.resetErr = err
+		close(cs.peerReset)
+		cs.bufPipe.CloseWithError(err)
+		cs.cc.cond.Broadcast() // wake up checkResetOrDone via clientStream.awaitFlowControl
+	}
+	return nil
+}
+
+// Ping sends a PING frame to the server and waits for the ack.
+func (cc *ClientConn) Ping(ctx context.Context) error {
+	c := make(chan struct{})
+	// Generate a random payload
+	var p [8]byte
+	for {
+		if _, err := rand.Read(p[:]); err != nil {
+			return err
+		}
+		cc.mu.Lock()
+		// check for dup before insert
+		if _, found := cc.pings[p]; !found {
+			cc.pings[p] = c
+			cc.mu.Unlock()
+			break
+		}
+		cc.mu.Unlock()
+	}
+	cc.wmu.Lock()
+	if err := cc.fr.WritePing(false, p); err != nil {
+		cc.wmu.Unlock()
+		return err
+	}
+	if err := cc.bw.Flush(); err != nil {
+		cc.wmu.Unlock()
+		return err
+	}
+	cc.wmu.Unlock()
+	select {
+	case <-c:
+		return nil
+	case <-ctx.Done():
+		return ctx.Err()
+	case <-cc.readerDone:
+		// connection closed
+		return cc.readerErr
+	}
+}
+
+func (rl *clientConnReadLoop) processPing(f *PingFrame) error {
+	if f.IsAck() {
+		cc := rl.cc
+		cc.mu.Lock()
+		defer cc.mu.Unlock()
+		// If ack, notify listener if any
+		if c, ok := cc.pings[f.Data]; ok {
+			close(c)
+			delete(cc.pings, f.Data)
+		}
+		return nil
+	}
+	cc := rl.cc
+	cc.wmu.Lock()
+	defer cc.wmu.Unlock()
+	if err := cc.fr.WritePing(true, f.Data); err != nil {
+		return err
+	}
+	return cc.bw.Flush()
+}
+
+func (rl *clientConnReadLoop) processPushPromise(f *PushPromiseFrame) error {
+	// We told the peer we don't want them.
+	// Spec says:
+	// "PUSH_PROMISE MUST NOT be sent if the SETTINGS_ENABLE_PUSH
+	// setting of the peer endpoint is set to 0. An endpoint that
+	// has set this setting and has received acknowledgement MUST
+	// treat the receipt of a PUSH_PROMISE frame as a connection
+	// error (Section 5.4.1) of type PROTOCOL_ERROR."
+	return ConnectionError(ErrCodeProtocol)
+}
+
+func (cc *ClientConn) writeStreamReset(streamID uint32, code ErrCode, err error) {
+	// TODO: map err to more interesting error codes, once the
+	// HTTP community comes up with some. But currently for
+	// RST_STREAM there's no equivalent to GOAWAY frame's debug
+	// data, and the error codes are all pretty vague ("cancel").
+	cc.wmu.Lock()
+	cc.fr.WriteRSTStream(streamID, code)
+	cc.bw.Flush()
+	cc.wmu.Unlock()
+}
+
+var (
+	errResponseHeaderListSize = errors.New("http2: response header list larger than advertised limit")
+	errRequestHeaderListSize  = errors.New("http2: request header list larger than peer's advertised limit")
+)
+
+func (cc *ClientConn) logf(format string, args ...interface{}) {
+	cc.t.logf(format, args...)
+}
+
+func (cc *ClientConn) vlogf(format string, args ...interface{}) {
+	cc.t.vlogf(format, args...)
+}
+
+func (t *Transport) vlogf(format string, args ...interface{}) {
+	if VerboseLogs {
+		t.logf(format, args...)
+	}
+}
+
+func (t *Transport) logf(format string, args ...interface{}) {
+	log.Printf(format, args...)
+}
+
+var noBody io.ReadCloser = ioutil.NopCloser(bytes.NewReader(nil))
+
+func strSliceContains(ss []string, s string) bool {
+	for _, v := range ss {
+		if v == s {
+			return true
+		}
+	}
+	return false
+}
+
+type erringRoundTripper struct{ err error }
+
+func (rt erringRoundTripper) RoundTrip(*http.Request) (*http.Response, error) { return nil, rt.err }
+
+// gzipReader wraps a response body so it can lazily
+// call gzip.NewReader on the first call to Read
+type gzipReader struct {
+	body io.ReadCloser // underlying Response.Body
+	zr   *gzip.Reader  // lazily-initialized gzip reader
+	zerr error         // sticky error
+}
+
+func (gz *gzipReader) Read(p []byte) (n int, err error) {
+	if gz.zerr != nil {
+		return 0, gz.zerr
+	}
+	if gz.zr == nil {
+		gz.zr, err = gzip.NewReader(gz.body)
+		if err != nil {
+			gz.zerr = err
+			return 0, err
+		}
+	}
+	return gz.zr.Read(p)
+}
+
+func (gz *gzipReader) Close() error {
+	return gz.body.Close()
+}
+
+type errorReader struct{ err error }
+
+func (r errorReader) Read(p []byte) (int, error) { return 0, r.err }
+
+// bodyWriterState encapsulates various state around the Transport's writing
+// of the request body, particularly regarding doing delayed writes of the body
+// when the request contains "Expect: 100-continue".
+type bodyWriterState struct {
+	cs     *clientStream
+	timer  *time.Timer   // if non-nil, we're doing a delayed write
+	fnonce *sync.Once    // to call fn with
+	fn     func()        // the code to run in the goroutine, writing the body
+	resc   chan error    // result of fn's execution
+	delay  time.Duration // how long we should delay a delayed write for
+}
+
+func (t *Transport) getBodyWriterState(cs *clientStream, body io.Reader) (s bodyWriterState) {
+	s.cs = cs
+	if body == nil {
+		return
+	}
+	resc := make(chan error, 1)
+	s.resc = resc
+	s.fn = func() {
+		cs.cc.mu.Lock()
+		cs.startedWrite = true
+		cs.cc.mu.Unlock()
+		resc <- cs.writeRequestBody(body, cs.req.Body)
+	}
+	s.delay = t.expectContinueTimeout()
+	if s.delay == 0 ||
+		!httpguts.HeaderValuesContainsToken(
+			cs.req.Header["Expect"],
+			"100-continue") {
+		return
+	}
+	s.fnonce = new(sync.Once)
+
+	// Arm the timer with a very large duration, which we'll
+	// intentionally lower later. It has to be large now because
+	// we need a handle to it before writing the headers, but the
+	// s.delay value is defined to not start until after the
+	// request headers were written.
+	const hugeDuration = 365 * 24 * time.Hour
+	s.timer = time.AfterFunc(hugeDuration, func() {
+		s.fnonce.Do(s.fn)
+	})
+	return
+}
+
+func (s bodyWriterState) cancel() {
+	if s.timer != nil {
+		s.timer.Stop()
+	}
+}
+
+func (s bodyWriterState) on100() {
+	if s.timer == nil {
+		// If we didn't do a delayed write, ignore the server's
+		// bogus 100 continue response.
+		return
+	}
+	s.timer.Stop()
+	go func() { s.fnonce.Do(s.fn) }()
+}
+
+// scheduleBodyWrite starts writing the body, either immediately (in
+// the common case) or after the delay timeout. It should not be
+// called until after the headers have been written.
+func (s bodyWriterState) scheduleBodyWrite() {
+	if s.timer == nil {
+		// We're not doing a delayed write (see
+		// getBodyWriterState), so just start the writing
+		// goroutine immediately.
+		go s.fn()
+		return
+	}
+	traceWait100Continue(s.cs.trace)
+	if s.timer.Stop() {
+		s.timer.Reset(s.delay)
+	}
+}
+
+// isConnectionCloseRequest reports whether req should use its own
+// connection for a single request and then close the connection.
+func isConnectionCloseRequest(req *http.Request) bool {
+	return req.Close || httpguts.HeaderValuesContainsToken(req.Header["Connection"], "close")
+}
+
+// registerHTTPSProtocol calls Transport.RegisterProtocol but
+// converting panics into errors.
+func registerHTTPSProtocol(t *http.Transport, rt noDialH2RoundTripper) (err error) {
+	defer func() {
+		if e := recover(); e != nil {
+			err = fmt.Errorf("%v", e)
+		}
+	}()
+	t.RegisterProtocol("https", rt)
+	return nil
+}
+
+// noDialH2RoundTripper is a RoundTripper which only tries to complete the request
+// if there's already has a cached connection to the host.
+// (The field is exported so it can be accessed via reflect from net/http; tested
+// by TestNoDialH2RoundTripperType)
+type noDialH2RoundTripper struct{ *Transport }
+
+func (rt noDialH2RoundTripper) RoundTrip(req *http.Request) (*http.Response, error) {
+	res, err := rt.Transport.RoundTrip(req)
+	if isNoCachedConnError(err) {
+		return nil, http.ErrSkipAltProtocol
+	}
+	return res, err
+}
+
+func (t *Transport) idleConnTimeout() time.Duration {
+	if t.t1 != nil {
+		return t.t1.IdleConnTimeout
+	}
+	return 0
+}
+
+func traceGetConn(req *http.Request, hostPort string) {
+	trace := httptrace.ContextClientTrace(req.Context())
+	if trace == nil || trace.GetConn == nil {
+		return
+	}
+	trace.GetConn(hostPort)
+}
+
+func traceGotConn(req *http.Request, cc *ClientConn, reused bool) {
+	trace := httptrace.ContextClientTrace(req.Context())
+	if trace == nil || trace.GotConn == nil {
+		return
+	}
+	ci := httptrace.GotConnInfo{Conn: cc.tconn}
+	ci.Reused = reused
+	cc.mu.Lock()
+	ci.WasIdle = len(cc.streams) == 0 && reused
+	if ci.WasIdle && !cc.lastActive.IsZero() {
+		ci.IdleTime = time.Now().Sub(cc.lastActive)
+	}
+	cc.mu.Unlock()
+
+	trace.GotConn(ci)
+}
+
+func traceWroteHeaders(trace *httptrace.ClientTrace) {
+	if trace != nil && trace.WroteHeaders != nil {
+		trace.WroteHeaders()
+	}
+}
+
+func traceGot100Continue(trace *httptrace.ClientTrace) {
+	if trace != nil && trace.Got100Continue != nil {
+		trace.Got100Continue()
+	}
+}
+
+func traceWait100Continue(trace *httptrace.ClientTrace) {
+	if trace != nil && trace.Wait100Continue != nil {
+		trace.Wait100Continue()
+	}
+}
+
+func traceWroteRequest(trace *httptrace.ClientTrace, err error) {
+	if trace != nil && trace.WroteRequest != nil {
+		trace.WroteRequest(httptrace.WroteRequestInfo{Err: err})
+	}
+}
+
+func traceFirstResponseByte(trace *httptrace.ClientTrace) {
+	if trace != nil && trace.GotFirstResponseByte != nil {
+		trace.GotFirstResponseByte()
+	}
+}
diff --git a/vendor/golang.org/x/net/http2/write.go b/vendor/golang.org/x/net/http2/write.go
new file mode 100644
index 0000000..3849bc2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/write.go
@@ -0,0 +1,365 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"bytes"
+	"fmt"
+	"log"
+	"net/http"
+	"net/url"
+
+	"golang.org/x/net/http/httpguts"
+	"golang.org/x/net/http2/hpack"
+)
+
+// writeFramer is implemented by any type that is used to write frames.
+type writeFramer interface {
+	writeFrame(writeContext) error
+
+	// staysWithinBuffer reports whether this writer promises that
+	// it will only write less than or equal to size bytes, and it
+	// won't Flush the write context.
+	staysWithinBuffer(size int) bool
+}
+
+// writeContext is the interface needed by the various frame writer
+// types below. All the writeFrame methods below are scheduled via the
+// frame writing scheduler (see writeScheduler in writesched.go).
+//
+// This interface is implemented by *serverConn.
+//
+// TODO: decide whether to a) use this in the client code (which didn't
+// end up using this yet, because it has a simpler design, not
+// currently implementing priorities), or b) delete this and
+// make the server code a bit more concrete.
+type writeContext interface {
+	Framer() *Framer
+	Flush() error
+	CloseConn() error
+	// HeaderEncoder returns an HPACK encoder that writes to the
+	// returned buffer.
+	HeaderEncoder() (*hpack.Encoder, *bytes.Buffer)
+}
+
+// writeEndsStream reports whether w writes a frame that will transition
+// the stream to a half-closed local state. This returns false for RST_STREAM,
+// which closes the entire stream (not just the local half).
+func writeEndsStream(w writeFramer) bool {
+	switch v := w.(type) {
+	case *writeData:
+		return v.endStream
+	case *writeResHeaders:
+		return v.endStream
+	case nil:
+		// This can only happen if the caller reuses w after it's
+		// been intentionally nil'ed out to prevent use. Keep this
+		// here to catch future refactoring breaking it.
+		panic("writeEndsStream called on nil writeFramer")
+	}
+	return false
+}
+
+type flushFrameWriter struct{}
+
+func (flushFrameWriter) writeFrame(ctx writeContext) error {
+	return ctx.Flush()
+}
+
+func (flushFrameWriter) staysWithinBuffer(max int) bool { return false }
+
+type writeSettings []Setting
+
+func (s writeSettings) staysWithinBuffer(max int) bool {
+	const settingSize = 6 // uint16 + uint32
+	return frameHeaderLen+settingSize*len(s) <= max
+
+}
+
+func (s writeSettings) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteSettings([]Setting(s)...)
+}
+
+type writeGoAway struct {
+	maxStreamID uint32
+	code        ErrCode
+}
+
+func (p *writeGoAway) writeFrame(ctx writeContext) error {
+	err := ctx.Framer().WriteGoAway(p.maxStreamID, p.code, nil)
+	ctx.Flush() // ignore error: we're hanging up on them anyway
+	return err
+}
+
+func (*writeGoAway) staysWithinBuffer(max int) bool { return false } // flushes
+
+type writeData struct {
+	streamID  uint32
+	p         []byte
+	endStream bool
+}
+
+func (w *writeData) String() string {
+	return fmt.Sprintf("writeData(stream=%d, p=%d, endStream=%v)", w.streamID, len(w.p), w.endStream)
+}
+
+func (w *writeData) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteData(w.streamID, w.endStream, w.p)
+}
+
+func (w *writeData) staysWithinBuffer(max int) bool {
+	return frameHeaderLen+len(w.p) <= max
+}
+
+// handlerPanicRST is the message sent from handler goroutines when
+// the handler panics.
+type handlerPanicRST struct {
+	StreamID uint32
+}
+
+func (hp handlerPanicRST) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteRSTStream(hp.StreamID, ErrCodeInternal)
+}
+
+func (hp handlerPanicRST) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+func (se StreamError) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteRSTStream(se.StreamID, se.Code)
+}
+
+func (se StreamError) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+type writePingAck struct{ pf *PingFrame }
+
+func (w writePingAck) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WritePing(true, w.pf.Data)
+}
+
+func (w writePingAck) staysWithinBuffer(max int) bool { return frameHeaderLen+len(w.pf.Data) <= max }
+
+type writeSettingsAck struct{}
+
+func (writeSettingsAck) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteSettingsAck()
+}
+
+func (writeSettingsAck) staysWithinBuffer(max int) bool { return frameHeaderLen <= max }
+
+// splitHeaderBlock splits headerBlock into fragments so that each fragment fits
+// in a single frame, then calls fn for each fragment. firstFrag/lastFrag are true
+// for the first/last fragment, respectively.
+func splitHeaderBlock(ctx writeContext, headerBlock []byte, fn func(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error) error {
+	// For now we're lazy and just pick the minimum MAX_FRAME_SIZE
+	// that all peers must support (16KB). Later we could care
+	// more and send larger frames if the peer advertised it, but
+	// there's little point. Most headers are small anyway (so we
+	// generally won't have CONTINUATION frames), and extra frames
+	// only waste 9 bytes anyway.
+	const maxFrameSize = 16384
+
+	first := true
+	for len(headerBlock) > 0 {
+		frag := headerBlock
+		if len(frag) > maxFrameSize {
+			frag = frag[:maxFrameSize]
+		}
+		headerBlock = headerBlock[len(frag):]
+		if err := fn(ctx, frag, first, len(headerBlock) == 0); err != nil {
+			return err
+		}
+		first = false
+	}
+	return nil
+}
+
+// writeResHeaders is a request to write a HEADERS and 0+ CONTINUATION frames
+// for HTTP response headers or trailers from a server handler.
+type writeResHeaders struct {
+	streamID    uint32
+	httpResCode int         // 0 means no ":status" line
+	h           http.Header // may be nil
+	trailers    []string    // if non-nil, which keys of h to write. nil means all.
+	endStream   bool
+
+	date          string
+	contentType   string
+	contentLength string
+}
+
+func encKV(enc *hpack.Encoder, k, v string) {
+	if VerboseLogs {
+		log.Printf("http2: server encoding header %q = %q", k, v)
+	}
+	enc.WriteField(hpack.HeaderField{Name: k, Value: v})
+}
+
+func (w *writeResHeaders) staysWithinBuffer(max int) bool {
+	// TODO: this is a common one. It'd be nice to return true
+	// here and get into the fast path if we could be clever and
+	// calculate the size fast enough, or at least a conservative
+	// upper bound that usually fires. (Maybe if w.h and
+	// w.trailers are nil, so we don't need to enumerate it.)
+	// Otherwise I'm afraid that just calculating the length to
+	// answer this question would be slower than the ~2µs benefit.
+	return false
+}
+
+func (w *writeResHeaders) writeFrame(ctx writeContext) error {
+	enc, buf := ctx.HeaderEncoder()
+	buf.Reset()
+
+	if w.httpResCode != 0 {
+		encKV(enc, ":status", httpCodeString(w.httpResCode))
+	}
+
+	encodeHeaders(enc, w.h, w.trailers)
+
+	if w.contentType != "" {
+		encKV(enc, "content-type", w.contentType)
+	}
+	if w.contentLength != "" {
+		encKV(enc, "content-length", w.contentLength)
+	}
+	if w.date != "" {
+		encKV(enc, "date", w.date)
+	}
+
+	headerBlock := buf.Bytes()
+	if len(headerBlock) == 0 && w.trailers == nil {
+		panic("unexpected empty hpack")
+	}
+
+	return splitHeaderBlock(ctx, headerBlock, w.writeHeaderBlock)
+}
+
+func (w *writeResHeaders) writeHeaderBlock(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error {
+	if firstFrag {
+		return ctx.Framer().WriteHeaders(HeadersFrameParam{
+			StreamID:      w.streamID,
+			BlockFragment: frag,
+			EndStream:     w.endStream,
+			EndHeaders:    lastFrag,
+		})
+	} else {
+		return ctx.Framer().WriteContinuation(w.streamID, lastFrag, frag)
+	}
+}
+
+// writePushPromise is a request to write a PUSH_PROMISE and 0+ CONTINUATION frames.
+type writePushPromise struct {
+	streamID uint32   // pusher stream
+	method   string   // for :method
+	url      *url.URL // for :scheme, :authority, :path
+	h        http.Header
+
+	// Creates an ID for a pushed stream. This runs on serveG just before
+	// the frame is written. The returned ID is copied to promisedID.
+	allocatePromisedID func() (uint32, error)
+	promisedID         uint32
+}
+
+func (w *writePushPromise) staysWithinBuffer(max int) bool {
+	// TODO: see writeResHeaders.staysWithinBuffer
+	return false
+}
+
+func (w *writePushPromise) writeFrame(ctx writeContext) error {
+	enc, buf := ctx.HeaderEncoder()
+	buf.Reset()
+
+	encKV(enc, ":method", w.method)
+	encKV(enc, ":scheme", w.url.Scheme)
+	encKV(enc, ":authority", w.url.Host)
+	encKV(enc, ":path", w.url.RequestURI())
+	encodeHeaders(enc, w.h, nil)
+
+	headerBlock := buf.Bytes()
+	if len(headerBlock) == 0 {
+		panic("unexpected empty hpack")
+	}
+
+	return splitHeaderBlock(ctx, headerBlock, w.writeHeaderBlock)
+}
+
+func (w *writePushPromise) writeHeaderBlock(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error {
+	if firstFrag {
+		return ctx.Framer().WritePushPromise(PushPromiseParam{
+			StreamID:      w.streamID,
+			PromiseID:     w.promisedID,
+			BlockFragment: frag,
+			EndHeaders:    lastFrag,
+		})
+	} else {
+		return ctx.Framer().WriteContinuation(w.streamID, lastFrag, frag)
+	}
+}
+
+type write100ContinueHeadersFrame struct {
+	streamID uint32
+}
+
+func (w write100ContinueHeadersFrame) writeFrame(ctx writeContext) error {
+	enc, buf := ctx.HeaderEncoder()
+	buf.Reset()
+	encKV(enc, ":status", "100")
+	return ctx.Framer().WriteHeaders(HeadersFrameParam{
+		StreamID:      w.streamID,
+		BlockFragment: buf.Bytes(),
+		EndStream:     false,
+		EndHeaders:    true,
+	})
+}
+
+func (w write100ContinueHeadersFrame) staysWithinBuffer(max int) bool {
+	// Sloppy but conservative:
+	return 9+2*(len(":status")+len("100")) <= max
+}
+
+type writeWindowUpdate struct {
+	streamID uint32 // or 0 for conn-level
+	n        uint32
+}
+
+func (wu writeWindowUpdate) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+func (wu writeWindowUpdate) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteWindowUpdate(wu.streamID, wu.n)
+}
+
+// encodeHeaders encodes an http.Header. If keys is not nil, then (k, h[k])
+// is encoded only if k is in keys.
+func encodeHeaders(enc *hpack.Encoder, h http.Header, keys []string) {
+	if keys == nil {
+		sorter := sorterPool.Get().(*sorter)
+		// Using defer here, since the returned keys from the
+		// sorter.Keys method is only valid until the sorter
+		// is returned:
+		defer sorterPool.Put(sorter)
+		keys = sorter.Keys(h)
+	}
+	for _, k := range keys {
+		vv := h[k]
+		k = lowerHeader(k)
+		if !validWireHeaderFieldName(k) {
+			// Skip it as backup paranoia. Per
+			// golang.org/issue/14048, these should
+			// already be rejected at a higher level.
+			continue
+		}
+		isTE := k == "transfer-encoding"
+		for _, v := range vv {
+			if !httpguts.ValidHeaderFieldValue(v) {
+				// TODO: return an error? golang.org/issue/14048
+				// For now just omit it.
+				continue
+			}
+			// TODO: more of "8.1.2.2 Connection-Specific Header Fields"
+			if isTE && v != "trailers" {
+				continue
+			}
+			encKV(enc, k, v)
+		}
+	}
+}
diff --git a/vendor/golang.org/x/net/http2/writesched.go b/vendor/golang.org/x/net/http2/writesched.go
new file mode 100644
index 0000000..f24d2b1
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched.go
@@ -0,0 +1,248 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import "fmt"
+
+// WriteScheduler is the interface implemented by HTTP/2 write schedulers.
+// Methods are never called concurrently.
+type WriteScheduler interface {
+	// OpenStream opens a new stream in the write scheduler.
+	// It is illegal to call this with streamID=0 or with a streamID that is
+	// already open -- the call may panic.
+	OpenStream(streamID uint32, options OpenStreamOptions)
+
+	// CloseStream closes a stream in the write scheduler. Any frames queued on
+	// this stream should be discarded. It is illegal to call this on a stream
+	// that is not open -- the call may panic.
+	CloseStream(streamID uint32)
+
+	// AdjustStream adjusts the priority of the given stream. This may be called
+	// on a stream that has not yet been opened or has been closed. Note that
+	// RFC 7540 allows PRIORITY frames to be sent on streams in any state. See:
+	// https://tools.ietf.org/html/rfc7540#section-5.1
+	AdjustStream(streamID uint32, priority PriorityParam)
+
+	// Push queues a frame in the scheduler. In most cases, this will not be
+	// called with wr.StreamID()!=0 unless that stream is currently open. The one
+	// exception is RST_STREAM frames, which may be sent on idle or closed streams.
+	Push(wr FrameWriteRequest)
+
+	// Pop dequeues the next frame to write. Returns false if no frames can
+	// be written. Frames with a given wr.StreamID() are Pop'd in the same
+	// order they are Push'd. No frames should be discarded except by CloseStream.
+	Pop() (wr FrameWriteRequest, ok bool)
+}
+
+// OpenStreamOptions specifies extra options for WriteScheduler.OpenStream.
+type OpenStreamOptions struct {
+	// PusherID is zero if the stream was initiated by the client. Otherwise,
+	// PusherID names the stream that pushed the newly opened stream.
+	PusherID uint32
+}
+
+// FrameWriteRequest is a request to write a frame.
+type FrameWriteRequest struct {
+	// write is the interface value that does the writing, once the
+	// WriteScheduler has selected this frame to write. The write
+	// functions are all defined in write.go.
+	write writeFramer
+
+	// stream is the stream on which this frame will be written.
+	// nil for non-stream frames like PING and SETTINGS.
+	stream *stream
+
+	// done, if non-nil, must be a buffered channel with space for
+	// 1 message and is sent the return value from write (or an
+	// earlier error) when the frame has been written.
+	done chan error
+}
+
+// StreamID returns the id of the stream this frame will be written to.
+// 0 is used for non-stream frames such as PING and SETTINGS.
+func (wr FrameWriteRequest) StreamID() uint32 {
+	if wr.stream == nil {
+		if se, ok := wr.write.(StreamError); ok {
+			// (*serverConn).resetStream doesn't set
+			// stream because it doesn't necessarily have
+			// one. So special case this type of write
+			// message.
+			return se.StreamID
+		}
+		return 0
+	}
+	return wr.stream.id
+}
+
+// isControl reports whether wr is a control frame for MaxQueuedControlFrames
+// purposes. That includes non-stream frames and RST_STREAM frames.
+func (wr FrameWriteRequest) isControl() bool {
+	return wr.stream == nil
+}
+
+// DataSize returns the number of flow control bytes that must be consumed
+// to write this entire frame. This is 0 for non-DATA frames.
+func (wr FrameWriteRequest) DataSize() int {
+	if wd, ok := wr.write.(*writeData); ok {
+		return len(wd.p)
+	}
+	return 0
+}
+
+// Consume consumes min(n, available) bytes from this frame, where available
+// is the number of flow control bytes available on the stream. Consume returns
+// 0, 1, or 2 frames, where the integer return value gives the number of frames
+// returned.
+//
+// If flow control prevents consuming any bytes, this returns (_, _, 0). If
+// the entire frame was consumed, this returns (wr, _, 1). Otherwise, this
+// returns (consumed, rest, 2), where 'consumed' contains the consumed bytes and
+// 'rest' contains the remaining bytes. The consumed bytes are deducted from the
+// underlying stream's flow control budget.
+func (wr FrameWriteRequest) Consume(n int32) (FrameWriteRequest, FrameWriteRequest, int) {
+	var empty FrameWriteRequest
+
+	// Non-DATA frames are always consumed whole.
+	wd, ok := wr.write.(*writeData)
+	if !ok || len(wd.p) == 0 {
+		return wr, empty, 1
+	}
+
+	// Might need to split after applying limits.
+	allowed := wr.stream.flow.available()
+	if n < allowed {
+		allowed = n
+	}
+	if wr.stream.sc.maxFrameSize < allowed {
+		allowed = wr.stream.sc.maxFrameSize
+	}
+	if allowed <= 0 {
+		return empty, empty, 0
+	}
+	if len(wd.p) > int(allowed) {
+		wr.stream.flow.take(allowed)
+		consumed := FrameWriteRequest{
+			stream: wr.stream,
+			write: &writeData{
+				streamID: wd.streamID,
+				p:        wd.p[:allowed],
+				// Even if the original had endStream set, there
+				// are bytes remaining because len(wd.p) > allowed,
+				// so we know endStream is false.
+				endStream: false,
+			},
+			// Our caller is blocking on the final DATA frame, not
+			// this intermediate frame, so no need to wait.
+			done: nil,
+		}
+		rest := FrameWriteRequest{
+			stream: wr.stream,
+			write: &writeData{
+				streamID:  wd.streamID,
+				p:         wd.p[allowed:],
+				endStream: wd.endStream,
+			},
+			done: wr.done,
+		}
+		return consumed, rest, 2
+	}
+
+	// The frame is consumed whole.
+	// NB: This cast cannot overflow because allowed is <= math.MaxInt32.
+	wr.stream.flow.take(int32(len(wd.p)))
+	return wr, empty, 1
+}
+
+// String is for debugging only.
+func (wr FrameWriteRequest) String() string {
+	var des string
+	if s, ok := wr.write.(fmt.Stringer); ok {
+		des = s.String()
+	} else {
+		des = fmt.Sprintf("%T", wr.write)
+	}
+	return fmt.Sprintf("[FrameWriteRequest stream=%d, ch=%v, writer=%v]", wr.StreamID(), wr.done != nil, des)
+}
+
+// replyToWriter sends err to wr.done and panics if the send must block
+// This does nothing if wr.done is nil.
+func (wr *FrameWriteRequest) replyToWriter(err error) {
+	if wr.done == nil {
+		return
+	}
+	select {
+	case wr.done <- err:
+	default:
+		panic(fmt.Sprintf("unbuffered done channel passed in for type %T", wr.write))
+	}
+	wr.write = nil // prevent use (assume it's tainted after wr.done send)
+}
+
+// writeQueue is used by implementations of WriteScheduler.
+type writeQueue struct {
+	s []FrameWriteRequest
+}
+
+func (q *writeQueue) empty() bool { return len(q.s) == 0 }
+
+func (q *writeQueue) push(wr FrameWriteRequest) {
+	q.s = append(q.s, wr)
+}
+
+func (q *writeQueue) shift() FrameWriteRequest {
+	if len(q.s) == 0 {
+		panic("invalid use of queue")
+	}
+	wr := q.s[0]
+	// TODO: less copy-happy queue.
+	copy(q.s, q.s[1:])
+	q.s[len(q.s)-1] = FrameWriteRequest{}
+	q.s = q.s[:len(q.s)-1]
+	return wr
+}
+
+// consume consumes up to n bytes from q.s[0]. If the frame is
+// entirely consumed, it is removed from the queue. If the frame
+// is partially consumed, the frame is kept with the consumed
+// bytes removed. Returns true iff any bytes were consumed.
+func (q *writeQueue) consume(n int32) (FrameWriteRequest, bool) {
+	if len(q.s) == 0 {
+		return FrameWriteRequest{}, false
+	}
+	consumed, rest, numresult := q.s[0].Consume(n)
+	switch numresult {
+	case 0:
+		return FrameWriteRequest{}, false
+	case 1:
+		q.shift()
+	case 2:
+		q.s[0] = rest
+	}
+	return consumed, true
+}
+
+type writeQueuePool []*writeQueue
+
+// put inserts an unused writeQueue into the pool.
+func (p *writeQueuePool) put(q *writeQueue) {
+	for i := range q.s {
+		q.s[i] = FrameWriteRequest{}
+	}
+	q.s = q.s[:0]
+	*p = append(*p, q)
+}
+
+// get returns an empty writeQueue.
+func (p *writeQueuePool) get() *writeQueue {
+	ln := len(*p)
+	if ln == 0 {
+		return new(writeQueue)
+	}
+	x := ln - 1
+	q := (*p)[x]
+	(*p)[x] = nil
+	*p = (*p)[:x]
+	return q
+}
diff --git a/vendor/golang.org/x/net/http2/writesched_priority.go b/vendor/golang.org/x/net/http2/writesched_priority.go
new file mode 100644
index 0000000..2618b2c
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched_priority.go
@@ -0,0 +1,452 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"fmt"
+	"math"
+	"sort"
+)
+
+// RFC 7540, Section 5.3.5: the default weight is 16.
+const priorityDefaultWeight = 15 // 16 = 15 + 1
+
+// PriorityWriteSchedulerConfig configures a priorityWriteScheduler.
+type PriorityWriteSchedulerConfig struct {
+	// MaxClosedNodesInTree controls the maximum number of closed streams to
+	// retain in the priority tree. Setting this to zero saves a small amount
+	// of memory at the cost of performance.
+	//
+	// See RFC 7540, Section 5.3.4:
+	//   "It is possible for a stream to become closed while prioritization
+	//   information ... is in transit. ... This potentially creates suboptimal
+	//   prioritization, since the stream could be given a priority that is
+	//   different from what is intended. To avoid these problems, an endpoint
+	//   SHOULD retain stream prioritization state for a period after streams
+	//   become closed. The longer state is retained, the lower the chance that
+	//   streams are assigned incorrect or default priority values."
+	MaxClosedNodesInTree int
+
+	// MaxIdleNodesInTree controls the maximum number of idle streams to
+	// retain in the priority tree. Setting this to zero saves a small amount
+	// of memory at the cost of performance.
+	//
+	// See RFC 7540, Section 5.3.4:
+	//   Similarly, streams that are in the "idle" state can be assigned
+	//   priority or become a parent of other streams. This allows for the
+	//   creation of a grouping node in the dependency tree, which enables
+	//   more flexible expressions of priority. Idle streams begin with a
+	//   default priority (Section 5.3.5).
+	MaxIdleNodesInTree int
+
+	// ThrottleOutOfOrderWrites enables write throttling to help ensure that
+	// data is delivered in priority order. This works around a race where
+	// stream B depends on stream A and both streams are about to call Write
+	// to queue DATA frames. If B wins the race, a naive scheduler would eagerly
+	// write as much data from B as possible, but this is suboptimal because A
+	// is a higher-priority stream. With throttling enabled, we write a small
+	// amount of data from B to minimize the amount of bandwidth that B can
+	// steal from A.
+	ThrottleOutOfOrderWrites bool
+}
+
+// NewPriorityWriteScheduler constructs a WriteScheduler that schedules
+// frames by following HTTP/2 priorities as described in RFC 7540 Section 5.3.
+// If cfg is nil, default options are used.
+func NewPriorityWriteScheduler(cfg *PriorityWriteSchedulerConfig) WriteScheduler {
+	if cfg == nil {
+		// For justification of these defaults, see:
+		// https://docs.google.com/document/d/1oLhNg1skaWD4_DtaoCxdSRN5erEXrH-KnLrMwEpOtFY
+		cfg = &PriorityWriteSchedulerConfig{
+			MaxClosedNodesInTree:     10,
+			MaxIdleNodesInTree:       10,
+			ThrottleOutOfOrderWrites: false,
+		}
+	}
+
+	ws := &priorityWriteScheduler{
+		nodes:                make(map[uint32]*priorityNode),
+		maxClosedNodesInTree: cfg.MaxClosedNodesInTree,
+		maxIdleNodesInTree:   cfg.MaxIdleNodesInTree,
+		enableWriteThrottle:  cfg.ThrottleOutOfOrderWrites,
+	}
+	ws.nodes[0] = &ws.root
+	if cfg.ThrottleOutOfOrderWrites {
+		ws.writeThrottleLimit = 1024
+	} else {
+		ws.writeThrottleLimit = math.MaxInt32
+	}
+	return ws
+}
+
+type priorityNodeState int
+
+const (
+	priorityNodeOpen priorityNodeState = iota
+	priorityNodeClosed
+	priorityNodeIdle
+)
+
+// priorityNode is a node in an HTTP/2 priority tree.
+// Each node is associated with a single stream ID.
+// See RFC 7540, Section 5.3.
+type priorityNode struct {
+	q            writeQueue        // queue of pending frames to write
+	id           uint32            // id of the stream, or 0 for the root of the tree
+	weight       uint8             // the actual weight is weight+1, so the value is in [1,256]
+	state        priorityNodeState // open | closed | idle
+	bytes        int64             // number of bytes written by this node, or 0 if closed
+	subtreeBytes int64             // sum(node.bytes) of all nodes in this subtree
+
+	// These links form the priority tree.
+	parent     *priorityNode
+	kids       *priorityNode // start of the kids list
+	prev, next *priorityNode // doubly-linked list of siblings
+}
+
+func (n *priorityNode) setParent(parent *priorityNode) {
+	if n == parent {
+		panic("setParent to self")
+	}
+	if n.parent == parent {
+		return
+	}
+	// Unlink from current parent.
+	if parent := n.parent; parent != nil {
+		if n.prev == nil {
+			parent.kids = n.next
+		} else {
+			n.prev.next = n.next
+		}
+		if n.next != nil {
+			n.next.prev = n.prev
+		}
+	}
+	// Link to new parent.
+	// If parent=nil, remove n from the tree.
+	// Always insert at the head of parent.kids (this is assumed by walkReadyInOrder).
+	n.parent = parent
+	if parent == nil {
+		n.next = nil
+		n.prev = nil
+	} else {
+		n.next = parent.kids
+		n.prev = nil
+		if n.next != nil {
+			n.next.prev = n
+		}
+		parent.kids = n
+	}
+}
+
+func (n *priorityNode) addBytes(b int64) {
+	n.bytes += b
+	for ; n != nil; n = n.parent {
+		n.subtreeBytes += b
+	}
+}
+
+// walkReadyInOrder iterates over the tree in priority order, calling f for each node
+// with a non-empty write queue. When f returns true, this function returns true and the
+// walk halts. tmp is used as scratch space for sorting.
+//
+// f(n, openParent) takes two arguments: the node to visit, n, and a bool that is true
+// if any ancestor p of n is still open (ignoring the root node).
+func (n *priorityNode) walkReadyInOrder(openParent bool, tmp *[]*priorityNode, f func(*priorityNode, bool) bool) bool {
+	if !n.q.empty() && f(n, openParent) {
+		return true
+	}
+	if n.kids == nil {
+		return false
+	}
+
+	// Don't consider the root "open" when updating openParent since
+	// we can't send data frames on the root stream (only control frames).
+	if n.id != 0 {
+		openParent = openParent || (n.state == priorityNodeOpen)
+	}
+
+	// Common case: only one kid or all kids have the same weight.
+	// Some clients don't use weights; other clients (like web browsers)
+	// use mostly-linear priority trees.
+	w := n.kids.weight
+	needSort := false
+	for k := n.kids.next; k != nil; k = k.next {
+		if k.weight != w {
+			needSort = true
+			break
+		}
+	}
+	if !needSort {
+		for k := n.kids; k != nil; k = k.next {
+			if k.walkReadyInOrder(openParent, tmp, f) {
+				return true
+			}
+		}
+		return false
+	}
+
+	// Uncommon case: sort the child nodes. We remove the kids from the parent,
+	// then re-insert after sorting so we can reuse tmp for future sort calls.
+	*tmp = (*tmp)[:0]
+	for n.kids != nil {
+		*tmp = append(*tmp, n.kids)
+		n.kids.setParent(nil)
+	}
+	sort.Sort(sortPriorityNodeSiblings(*tmp))
+	for i := len(*tmp) - 1; i >= 0; i-- {
+		(*tmp)[i].setParent(n) // setParent inserts at the head of n.kids
+	}
+	for k := n.kids; k != nil; k = k.next {
+		if k.walkReadyInOrder(openParent, tmp, f) {
+			return true
+		}
+	}
+	return false
+}
+
+type sortPriorityNodeSiblings []*priorityNode
+
+func (z sortPriorityNodeSiblings) Len() int      { return len(z) }
+func (z sortPriorityNodeSiblings) Swap(i, k int) { z[i], z[k] = z[k], z[i] }
+func (z sortPriorityNodeSiblings) Less(i, k int) bool {
+	// Prefer the subtree that has sent fewer bytes relative to its weight.
+	// See sections 5.3.2 and 5.3.4.
+	wi, bi := float64(z[i].weight+1), float64(z[i].subtreeBytes)
+	wk, bk := float64(z[k].weight+1), float64(z[k].subtreeBytes)
+	if bi == 0 && bk == 0 {
+		return wi >= wk
+	}
+	if bk == 0 {
+		return false
+	}
+	return bi/bk <= wi/wk
+}
+
+type priorityWriteScheduler struct {
+	// root is the root of the priority tree, where root.id = 0.
+	// The root queues control frames that are not associated with any stream.
+	root priorityNode
+
+	// nodes maps stream ids to priority tree nodes.
+	nodes map[uint32]*priorityNode
+
+	// maxID is the maximum stream id in nodes.
+	maxID uint32
+
+	// lists of nodes that have been closed or are idle, but are kept in
+	// the tree for improved prioritization. When the lengths exceed either
+	// maxClosedNodesInTree or maxIdleNodesInTree, old nodes are discarded.
+	closedNodes, idleNodes []*priorityNode
+
+	// From the config.
+	maxClosedNodesInTree int
+	maxIdleNodesInTree   int
+	writeThrottleLimit   int32
+	enableWriteThrottle  bool
+
+	// tmp is scratch space for priorityNode.walkReadyInOrder to reduce allocations.
+	tmp []*priorityNode
+
+	// pool of empty queues for reuse.
+	queuePool writeQueuePool
+}
+
+func (ws *priorityWriteScheduler) OpenStream(streamID uint32, options OpenStreamOptions) {
+	// The stream may be currently idle but cannot be opened or closed.
+	if curr := ws.nodes[streamID]; curr != nil {
+		if curr.state != priorityNodeIdle {
+			panic(fmt.Sprintf("stream %d already opened", streamID))
+		}
+		curr.state = priorityNodeOpen
+		return
+	}
+
+	// RFC 7540, Section 5.3.5:
+	//  "All streams are initially assigned a non-exclusive dependency on stream 0x0.
+	//  Pushed streams initially depend on their associated stream. In both cases,
+	//  streams are assigned a default weight of 16."
+	parent := ws.nodes[options.PusherID]
+	if parent == nil {
+		parent = &ws.root
+	}
+	n := &priorityNode{
+		q:      *ws.queuePool.get(),
+		id:     streamID,
+		weight: priorityDefaultWeight,
+		state:  priorityNodeOpen,
+	}
+	n.setParent(parent)
+	ws.nodes[streamID] = n
+	if streamID > ws.maxID {
+		ws.maxID = streamID
+	}
+}
+
+func (ws *priorityWriteScheduler) CloseStream(streamID uint32) {
+	if streamID == 0 {
+		panic("violation of WriteScheduler interface: cannot close stream 0")
+	}
+	if ws.nodes[streamID] == nil {
+		panic(fmt.Sprintf("violation of WriteScheduler interface: unknown stream %d", streamID))
+	}
+	if ws.nodes[streamID].state != priorityNodeOpen {
+		panic(fmt.Sprintf("violation of WriteScheduler interface: stream %d already closed", streamID))
+	}
+
+	n := ws.nodes[streamID]
+	n.state = priorityNodeClosed
+	n.addBytes(-n.bytes)
+
+	q := n.q
+	ws.queuePool.put(&q)
+	n.q.s = nil
+	if ws.maxClosedNodesInTree > 0 {
+		ws.addClosedOrIdleNode(&ws.closedNodes, ws.maxClosedNodesInTree, n)
+	} else {
+		ws.removeNode(n)
+	}
+}
+
+func (ws *priorityWriteScheduler) AdjustStream(streamID uint32, priority PriorityParam) {
+	if streamID == 0 {
+		panic("adjustPriority on root")
+	}
+
+	// If streamID does not exist, there are two cases:
+	// - A closed stream that has been removed (this will have ID <= maxID)
+	// - An idle stream that is being used for "grouping" (this will have ID > maxID)
+	n := ws.nodes[streamID]
+	if n == nil {
+		if streamID <= ws.maxID || ws.maxIdleNodesInTree == 0 {
+			return
+		}
+		ws.maxID = streamID
+		n = &priorityNode{
+			q:      *ws.queuePool.get(),
+			id:     streamID,
+			weight: priorityDefaultWeight,
+			state:  priorityNodeIdle,
+		}
+		n.setParent(&ws.root)
+		ws.nodes[streamID] = n
+		ws.addClosedOrIdleNode(&ws.idleNodes, ws.maxIdleNodesInTree, n)
+	}
+
+	// Section 5.3.1: A dependency on a stream that is not currently in the tree
+	// results in that stream being given a default priority (Section 5.3.5).
+	parent := ws.nodes[priority.StreamDep]
+	if parent == nil {
+		n.setParent(&ws.root)
+		n.weight = priorityDefaultWeight
+		return
+	}
+
+	// Ignore if the client tries to make a node its own parent.
+	if n == parent {
+		return
+	}
+
+	// Section 5.3.3:
+	//   "If a stream is made dependent on one of its own dependencies, the
+	//   formerly dependent stream is first moved to be dependent on the
+	//   reprioritized stream's previous parent. The moved dependency retains
+	//   its weight."
+	//
+	// That is: if parent depends on n, move parent to depend on n.parent.
+	for x := parent.parent; x != nil; x = x.parent {
+		if x == n {
+			parent.setParent(n.parent)
+			break
+		}
+	}
+
+	// Section 5.3.3: The exclusive flag causes the stream to become the sole
+	// dependency of its parent stream, causing other dependencies to become
+	// dependent on the exclusive stream.
+	if priority.Exclusive {
+		k := parent.kids
+		for k != nil {
+			next := k.next
+			if k != n {
+				k.setParent(n)
+			}
+			k = next
+		}
+	}
+
+	n.setParent(parent)
+	n.weight = priority.Weight
+}
+
+func (ws *priorityWriteScheduler) Push(wr FrameWriteRequest) {
+	var n *priorityNode
+	if id := wr.StreamID(); id == 0 {
+		n = &ws.root
+	} else {
+		n = ws.nodes[id]
+		if n == nil {
+			// id is an idle or closed stream. wr should not be a HEADERS or
+			// DATA frame. However, wr can be a RST_STREAM. In this case, we
+			// push wr onto the root, rather than creating a new priorityNode,
+			// since RST_STREAM is tiny and the stream's priority is unknown
+			// anyway. See issue #17919.
+			if wr.DataSize() > 0 {
+				panic("add DATA on non-open stream")
+			}
+			n = &ws.root
+		}
+	}
+	n.q.push(wr)
+}
+
+func (ws *priorityWriteScheduler) Pop() (wr FrameWriteRequest, ok bool) {
+	ws.root.walkReadyInOrder(false, &ws.tmp, func(n *priorityNode, openParent bool) bool {
+		limit := int32(math.MaxInt32)
+		if openParent {
+			limit = ws.writeThrottleLimit
+		}
+		wr, ok = n.q.consume(limit)
+		if !ok {
+			return false
+		}
+		n.addBytes(int64(wr.DataSize()))
+		// If B depends on A and B continuously has data available but A
+		// does not, gradually increase the throttling limit to allow B to
+		// steal more and more bandwidth from A.
+		if openParent {
+			ws.writeThrottleLimit += 1024
+			if ws.writeThrottleLimit < 0 {
+				ws.writeThrottleLimit = math.MaxInt32
+			}
+		} else if ws.enableWriteThrottle {
+			ws.writeThrottleLimit = 1024
+		}
+		return true
+	})
+	return wr, ok
+}
+
+func (ws *priorityWriteScheduler) addClosedOrIdleNode(list *[]*priorityNode, maxSize int, n *priorityNode) {
+	if maxSize == 0 {
+		return
+	}
+	if len(*list) == maxSize {
+		// Remove the oldest node, then shift left.
+		ws.removeNode((*list)[0])
+		x := (*list)[1:]
+		copy(*list, x)
+		*list = (*list)[:len(x)]
+	}
+	*list = append(*list, n)
+}
+
+func (ws *priorityWriteScheduler) removeNode(n *priorityNode) {
+	for k := n.kids; k != nil; k = k.next {
+		k.setParent(n.parent)
+	}
+	n.setParent(nil)
+	delete(ws.nodes, n.id)
+}
diff --git a/vendor/golang.org/x/net/http2/writesched_random.go b/vendor/golang.org/x/net/http2/writesched_random.go
new file mode 100644
index 0000000..9a7b9e5
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched_random.go
@@ -0,0 +1,77 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import "math"
+
+// NewRandomWriteScheduler constructs a WriteScheduler that ignores HTTP/2
+// priorities. Control frames like SETTINGS and PING are written before DATA
+// frames, but if no control frames are queued and multiple streams have queued
+// HEADERS or DATA frames, Pop selects a ready stream arbitrarily.
+func NewRandomWriteScheduler() WriteScheduler {
+	return &randomWriteScheduler{sq: make(map[uint32]*writeQueue)}
+}
+
+type randomWriteScheduler struct {
+	// zero are frames not associated with a specific stream.
+	zero writeQueue
+
+	// sq contains the stream-specific queues, keyed by stream ID.
+	// When a stream is idle, closed, or emptied, it's deleted
+	// from the map.
+	sq map[uint32]*writeQueue
+
+	// pool of empty queues for reuse.
+	queuePool writeQueuePool
+}
+
+func (ws *randomWriteScheduler) OpenStream(streamID uint32, options OpenStreamOptions) {
+	// no-op: idle streams are not tracked
+}
+
+func (ws *randomWriteScheduler) CloseStream(streamID uint32) {
+	q, ok := ws.sq[streamID]
+	if !ok {
+		return
+	}
+	delete(ws.sq, streamID)
+	ws.queuePool.put(q)
+}
+
+func (ws *randomWriteScheduler) AdjustStream(streamID uint32, priority PriorityParam) {
+	// no-op: priorities are ignored
+}
+
+func (ws *randomWriteScheduler) Push(wr FrameWriteRequest) {
+	id := wr.StreamID()
+	if id == 0 {
+		ws.zero.push(wr)
+		return
+	}
+	q, ok := ws.sq[id]
+	if !ok {
+		q = ws.queuePool.get()
+		ws.sq[id] = q
+	}
+	q.push(wr)
+}
+
+func (ws *randomWriteScheduler) Pop() (FrameWriteRequest, bool) {
+	// Control frames first.
+	if !ws.zero.empty() {
+		return ws.zero.shift(), true
+	}
+	// Iterate over all non-idle streams until finding one that can be consumed.
+	for streamID, q := range ws.sq {
+		if wr, ok := q.consume(math.MaxInt32); ok {
+			if q.empty() {
+				delete(ws.sq, streamID)
+				ws.queuePool.put(q)
+			}
+			return wr, true
+		}
+	}
+	return FrameWriteRequest{}, false
+}