VOL-1967 move api-server to separate repository
Change-Id: I21b85be74205805be15f8a85e53a903d16785671
diff --git a/vendor/github.com/DataDog/zstd/zstd.h b/vendor/github.com/DataDog/zstd/zstd.h
index 6405da6..a1910ee 100644
--- a/vendor/github.com/DataDog/zstd/zstd.h
+++ b/vendor/github.com/DataDog/zstd/zstd.h
@@ -35,40 +35,73 @@
#endif
-/*******************************************************************************************************
+/*******************************************************************************
Introduction
- zstd, short for Zstandard, is a fast lossless compression algorithm,
- targeting real-time compression scenarios at zlib-level and better compression ratios.
- The zstd compression library provides in-memory compression and decompression functions.
- The library supports compression levels from 1 up to ZSTD_maxCLevel() which is currently 22.
- Levels >= 20, labeled `--ultra`, should be used with caution, as they require more memory.
+ zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+ real-time compression scenarios at zlib-level and better compression ratios.
+ The zstd compression library provides in-memory compression and decompression
+ functions.
+
+ The library supports regular compression levels from 1 up to ZSTD_maxCLevel(),
+ which is currently 22. Levels >= 20, labeled `--ultra`, should be used with
+ caution, as they require more memory. The library also offers negative
+ compression levels, which extend the range of speed vs. ratio preferences.
+ The lower the level, the faster the speed (at the cost of compression).
+
Compression can be done in:
- a single step (described as Simple API)
- a single step, reusing a context (described as Explicit context)
- unbounded multiple steps (described as Streaming compression)
- The compression ratio achievable on small data can be highly improved using a dictionary in:
- - a single step (described as Simple dictionary API)
- - a single step, reusing a dictionary (described as Bulk-processing dictionary API)
- Advanced experimental functions can be accessed using #define ZSTD_STATIC_LINKING_ONLY before including zstd.h.
- Advanced experimental APIs shall never be used with a dynamic library.
- They are not "stable", their definition may change in the future. Only static linking is allowed.
-*********************************************************************************************************/
+ The compression ratio achievable on small data can be highly improved using
+ a dictionary. Dictionary compression can be performed in:
+ - a single step (described as Simple dictionary API)
+ - a single step, reusing a dictionary (described as Bulk-processing
+ dictionary API)
+
+ Advanced experimental functions can be accessed using
+ `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h.
+
+ Advanced experimental APIs should never be used with a dynamically-linked
+ library. They are not "stable"; their definitions or signatures may change in
+ the future. Only static linking is allowed.
+*******************************************************************************/
/*------ Version ------*/
#define ZSTD_VERSION_MAJOR 1
-#define ZSTD_VERSION_MINOR 3
-#define ZSTD_VERSION_RELEASE 4
+#define ZSTD_VERSION_MINOR 4
+#define ZSTD_VERSION_RELEASE 1
#define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
-ZSTDLIB_API unsigned ZSTD_versionNumber(void); /**< useful to check dll version */
+ZSTDLIB_API unsigned ZSTD_versionNumber(void); /**< to check runtime library version */
#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE
#define ZSTD_QUOTE(str) #str
#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str)
#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION)
-ZSTDLIB_API const char* ZSTD_versionString(void); /* added in v1.3.0 */
+ZSTDLIB_API const char* ZSTD_versionString(void); /* requires v1.3.0+ */
+
+/* *************************************
+ * Default constant
+ ***************************************/
+#ifndef ZSTD_CLEVEL_DEFAULT
+# define ZSTD_CLEVEL_DEFAULT 3
+#endif
+
+/* *************************************
+ * Constants
+ ***************************************/
+
+/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */
+#define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */
+#define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */
+#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */
+#define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0
+
+#define ZSTD_BLOCKSIZELOG_MAX 17
+#define ZSTD_BLOCKSIZE_MAX (1<<ZSTD_BLOCKSIZELOG_MAX)
+
/***************************************
@@ -92,11 +125,11 @@
ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity,
const void* src, size_t compressedSize);
-/*! ZSTD_getFrameContentSize() : added in v1.3.0
+/*! ZSTD_getFrameContentSize() : requires v1.3.0+
* `src` should point to the start of a ZSTD encoded frame.
* `srcSize` must be at least as large as the frame header.
* hint : any size >= `ZSTD_frameHeaderSize_max` is large enough.
- * @return : - decompressed size of the frame in `src`, if known
+ * @return : - decompressed size of `src` frame content, if known
* - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined
* - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small)
* note 1 : a 0 return value means the frame is valid but "empty".
@@ -106,7 +139,8 @@
* Optionally, application can rely on some implicit limit,
* as ZSTD_decompress() only needs an upper bound of decompressed size.
* (For example, data could be necessarily cut into blocks <= 16 KB).
- * note 3 : decompressed size is always present when compression is done with ZSTD_compress()
+ * note 3 : decompressed size is always present when compression is completed using single-pass functions,
+ * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict().
* note 4 : decompressed size can be very large (64-bits value),
* potentially larger than what local system can handle as a single memory segment.
* In which case, it's necessary to use streaming mode to decompress data.
@@ -123,16 +157,24 @@
* Both functions work the same way, but ZSTD_getDecompressedSize() blends
* "empty", "unknown" and "error" results to the same return value (0),
* while ZSTD_getFrameContentSize() gives them separate return values.
- * `src` is the start of a zstd compressed frame.
- * @return : content size to be decompressed, as a 64-bits value _if known and not empty_, 0 otherwise. */
+ * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */
ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize);
+/*! ZSTD_findFrameCompressedSize() :
+ * `src` should point to the start of a ZSTD frame or skippable frame.
+ * `srcSize` must be >= first frame size
+ * @return : the compressed size of the first frame starting at `src`,
+ * suitable to pass as `srcSize` to `ZSTD_decompress` or similar,
+ * or an error code if input is invalid */
+ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
+
/*====== Helper functions ======*/
#define ZSTD_COMPRESSBOUND(srcSize) ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */
ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
ZSTDLIB_API unsigned ZSTD_isError(size_t code); /*!< tells if a `size_t` function result is an error code */
ZSTDLIB_API const char* ZSTD_getErrorName(size_t code); /*!< provides readable string from an error code */
+ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed */
ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */
@@ -141,16 +183,23 @@
***************************************/
/*= Compression context
* When compressing many times,
- * it is recommended to allocate a context just once, and re-use it for each successive compression operation.
+ * it is recommended to allocate a context just once,
+ * and re-use it for each successive compression operation.
* This will make workload friendlier for system's memory.
- * Use one context per thread for parallel execution in multi-threaded environments. */
+ * Note : re-using context is just a speed / resource optimization.
+ * It doesn't change the compression ratio, which remains identical.
+ * Note 2 : In multi-threaded environments,
+ * use one different context per thread for parallel execution.
+ */
typedef struct ZSTD_CCtx_s ZSTD_CCtx;
ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void);
ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx);
/*! ZSTD_compressCCtx() :
- * Same as ZSTD_compress(), requires an allocated ZSTD_CCtx (see ZSTD_createCCtx()). */
-ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* ctx,
+ * Same as ZSTD_compress(), using an explicit ZSTD_CCtx
+ * The function will compress at requested compression level,
+ * ignoring any other parameter */
+ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx,
void* dst, size_t dstCapacity,
const void* src, size_t srcSize,
int compressionLevel);
@@ -166,82 +215,328 @@
ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx);
/*! ZSTD_decompressDCtx() :
- * Same as ZSTD_decompress(), requires an allocated ZSTD_DCtx (see ZSTD_createDCtx()) */
-ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* ctx,
+ * Same as ZSTD_decompress(),
+ * requires an allocated ZSTD_DCtx.
+ * Compatible with sticky parameters.
+ */
+ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
void* dst, size_t dstCapacity,
const void* src, size_t srcSize);
-/**************************
-* Simple dictionary API
-***************************/
-/*! ZSTD_compress_usingDict() :
- * Compression using a predefined Dictionary (see dictBuilder/zdict.h).
- * Note : This function loads the dictionary, resulting in significant startup delay.
- * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
-ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const void* dict,size_t dictSize,
- int compressionLevel);
+/***************************************
+* Advanced compression API
+***************************************/
-/*! ZSTD_decompress_usingDict() :
- * Decompression using a predefined Dictionary (see dictBuilder/zdict.h).
- * Dictionary must be identical to the one used during compression.
- * Note : This function loads the dictionary, resulting in significant startup delay.
- * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
-ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const void* dict,size_t dictSize);
+/* API design :
+ * Parameters are pushed one by one into an existing context,
+ * using ZSTD_CCtx_set*() functions.
+ * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
+ * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
+ * They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()
+ *
+ * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
+ *
+ * This API supercedes all other "advanced" API entry points in the experimental section.
+ * In the future, we expect to remove from experimental API entry points which are redundant with this API.
+ */
-/**********************************
- * Bulk processing dictionary API
- *********************************/
-typedef struct ZSTD_CDict_s ZSTD_CDict;
-
-/*! ZSTD_createCDict() :
- * When compressing multiple messages / blocks with the same dictionary, it's recommended to load it just once.
- * ZSTD_createCDict() will create a digested dictionary, ready to start future compression operations without startup delay.
- * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
- * `dictBuffer` can be released after ZSTD_CDict creation, since its content is copied within CDict */
-ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
- int compressionLevel);
-
-/*! ZSTD_freeCDict() :
- * Function frees memory allocated by ZSTD_createCDict(). */
-ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict);
-
-/*! ZSTD_compress_usingCDict() :
- * Compression using a digested Dictionary.
- * Faster startup than ZSTD_compress_usingDict(), recommended when same dictionary is used multiple times.
- * Note that compression level is decided during dictionary creation.
- * Frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
-ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const ZSTD_CDict* cdict);
+/* Compression strategies, listed from fastest to strongest */
+typedef enum { ZSTD_fast=1,
+ ZSTD_dfast=2,
+ ZSTD_greedy=3,
+ ZSTD_lazy=4,
+ ZSTD_lazy2=5,
+ ZSTD_btlazy2=6,
+ ZSTD_btopt=7,
+ ZSTD_btultra=8,
+ ZSTD_btultra2=9
+ /* note : new strategies _might_ be added in the future.
+ Only the order (from fast to strong) is guaranteed */
+} ZSTD_strategy;
-typedef struct ZSTD_DDict_s ZSTD_DDict;
+typedef enum {
-/*! ZSTD_createDDict() :
- * Create a digested dictionary, ready to start decompression operation without startup delay.
- * dictBuffer can be released after DDict creation, as its content is copied inside DDict */
-ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
+ /* compression parameters
+ * Note: When compressing with a ZSTD_CDict these parameters are superseded
+ * by the parameters used to construct the ZSTD_CDict. See ZSTD_CCtx_refCDict()
+ * for more info (superseded-by-cdict). */
+ ZSTD_c_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
+ * Default level is ZSTD_CLEVEL_DEFAULT==3.
+ * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT.
+ * Note 1 : it's possible to pass a negative compression level.
+ * Note 2 : setting a level sets all default values of other compression parameters */
+ ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2.
+ * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
+ * Special: value 0 means "use default windowLog".
+ * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT
+ * requires explicitly allowing such window size at decompression stage if using streaming. */
+ ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2.
+ * Resulting memory usage is (1 << (hashLog+2)).
+ * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
+ * Larger tables improve compression ratio of strategies <= dFast,
+ * and improve speed of strategies > dFast.
+ * Special: value 0 means "use default hashLog". */
+ ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2.
+ * Resulting memory usage is (1 << (chainLog+2)).
+ * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX.
+ * Larger tables result in better and slower compression.
+ * This parameter is useless when using "fast" strategy.
+ * It's still useful when using "dfast" strategy,
+ * in which case it defines a secondary probe table.
+ * Special: value 0 means "use default chainLog". */
+ ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2.
+ * More attempts result in better and slower compression.
+ * This parameter is useless when using "fast" and "dFast" strategies.
+ * Special: value 0 means "use default searchLog". */
+ ZSTD_c_minMatch=105, /* Minimum size of searched matches.
+ * Note that Zstandard can still find matches of smaller size,
+ * it just tweaks its search algorithm to look for this size and larger.
+ * Larger values increase compression and decompression speed, but decrease ratio.
+ * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX.
+ * Note that currently, for all strategies < btopt, effective minimum is 4.
+ * , for all strategies > fast, effective maximum is 6.
+ * Special: value 0 means "use default minMatchLength". */
+ ZSTD_c_targetLength=106, /* Impact of this field depends on strategy.
+ * For strategies btopt, btultra & btultra2:
+ * Length of Match considered "good enough" to stop search.
+ * Larger values make compression stronger, and slower.
+ * For strategy fast:
+ * Distance between match sampling.
+ * Larger values make compression faster, and weaker.
+ * Special: value 0 means "use default targetLength". */
+ ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition.
+ * The higher the value of selected strategy, the more complex it is,
+ * resulting in stronger and slower compression.
+ * Special: value 0 means "use default strategy". */
-/*! ZSTD_freeDDict() :
- * Function frees memory allocated with ZSTD_createDDict() */
-ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict);
+ /* LDM mode parameters */
+ ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
+ * This parameter is designed to improve compression ratio
+ * for large inputs, by finding large matches at long distance.
+ * It increases memory usage and window size.
+ * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
+ * except when expressly set to a different value. */
+ ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2.
+ * Larger values increase memory usage and compression ratio,
+ * but decrease compression speed.
+ * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
+ * default: windowlog - 7.
+ * Special: value 0 means "automatically determine hashlog". */
+ ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher.
+ * Larger/too small values usually decrease compression ratio.
+ * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
+ * Special: value 0 means "use default value" (default: 64). */
+ ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution.
+ * Larger values improve collision resolution but decrease compression speed.
+ * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX.
+ * Special: value 0 means "use default value" (default: 3). */
+ ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table.
+ * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
+ * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
+ * Larger values improve compression speed.
+ * Deviating far from default value will likely result in a compression ratio decrease.
+ * Special: value 0 means "automatically determine hashRateLog". */
-/*! ZSTD_decompress_usingDDict() :
- * Decompression using a digested Dictionary.
- * Faster startup than ZSTD_decompress_usingDict(), recommended when same dictionary is used multiple times. */
-ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const ZSTD_DDict* ddict);
+ /* frame parameters */
+ ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
+ * Content size must be known at the beginning of compression.
+ * This is automatically the case when using ZSTD_compress2(),
+ * For streaming variants, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */
+ ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */
+ ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */
+
+ /* multi-threading parameters */
+ /* These parameters are only useful if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
+ * They return an error otherwise. */
+ ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel.
+ * When nbWorkers >= 1, triggers asynchronous mode when used with ZSTD_compressStream*() :
+ * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
+ * while compression work is performed in parallel, within worker threads.
+ * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
+ * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
+ * More workers improve speed, but also increase memory usage.
+ * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */
+ ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
+ * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
+ * 0 means default, which is dynamically determined based on compression parameters.
+ * Job size must be a minimum of overlap size, or 1 MB, whichever is largest.
+ * The minimum size is automatically and transparently enforced */
+ ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size.
+ * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
+ * It helps preserve compression ratio, while each job is compressed in parallel.
+ * This value is enforced only when nbWorkers >= 1.
+ * Larger values increase compression ratio, but decrease speed.
+ * Possible values range from 0 to 9 :
+ * - 0 means "default" : value will be determined by the library, depending on strategy
+ * - 1 means "no overlap"
+ * - 9 means "full overlap", using a full window size.
+ * Each intermediate rank increases/decreases load size by a factor 2 :
+ * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default
+ * default value varies between 6 and 9, depending on strategy */
+
+ /* note : additional experimental parameters are also available
+ * within the experimental section of the API.
+ * At the time of this writing, they include :
+ * ZSTD_c_rsyncable
+ * ZSTD_c_format
+ * ZSTD_c_forceMaxWindow
+ * ZSTD_c_forceAttachDict
+ * ZSTD_c_literalCompressionMode
+ * ZSTD_c_targetCBlockSize
+ * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+ * note : never ever use experimentalParam? names directly;
+ * also, the enums values themselves are unstable and can still change.
+ */
+ ZSTD_c_experimentalParam1=500,
+ ZSTD_c_experimentalParam2=10,
+ ZSTD_c_experimentalParam3=1000,
+ ZSTD_c_experimentalParam4=1001,
+ ZSTD_c_experimentalParam5=1002,
+ ZSTD_c_experimentalParam6=1003,
+} ZSTD_cParameter;
+
+typedef struct {
+ size_t error;
+ int lowerBound;
+ int upperBound;
+} ZSTD_bounds;
+
+/*! ZSTD_cParam_getBounds() :
+ * All parameters must belong to an interval with lower and upper bounds,
+ * otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ * - an error status field, which must be tested using ZSTD_isError()
+ * - lower and upper bounds, both inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam);
+
+/*! ZSTD_CCtx_setParameter() :
+ * Set one compression parameter, selected by enum ZSTD_cParameter.
+ * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds().
+ * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ * Setting a parameter is generally only possible during frame initialization (before starting compression).
+ * Exception : when using multi-threading mode (nbWorkers >= 1),
+ * the following parameters can be updated _during_ compression (within same frame):
+ * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
+ * new parameters will be active for next job only (after a flush()).
+ * @return : an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtx_setPledgedSrcSize() :
+ * Total input data size to be compressed as a single frame.
+ * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag.
+ * This value will also be controlled at end of frame, and trigger an error if not respected.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame.
+ * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
+ * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame.
+ * Note 2 : pledgedSrcSize is only valid once, for the next frame.
+ * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN.
+ * Note 3 : Whenever all input data is provided and consumed in a single round,
+ * for example with ZSTD_compress2(),
+ * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end),
+ * this value is automatically overridden by srcSize instead.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
+
+typedef enum {
+ ZSTD_reset_session_only = 1,
+ ZSTD_reset_parameters = 2,
+ ZSTD_reset_session_and_parameters = 3
+} ZSTD_ResetDirective;
+
+/*! ZSTD_CCtx_reset() :
+ * There are 2 different things that can be reset, independently or jointly :
+ * - The session : will stop compressing current frame, and make CCtx ready to start a new one.
+ * Useful after an error, or to interrupt any ongoing compression.
+ * Any internal data not yet flushed is cancelled.
+ * Compression parameters and dictionary remain unchanged.
+ * They will be used to compress next frame.
+ * Resetting session never fails.
+ * - The parameters : changes all parameters back to "default".
+ * This removes any reference to any dictionary too.
+ * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing)
+ * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError())
+ * - Both : similar to resetting the session, followed by resetting parameters.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
+
+/*! ZSTD_compress2() :
+ * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
+ * ZSTD_compress2() always starts a new frame.
+ * Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
+ * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ * - The function is always blocking, returns when compression is completed.
+ * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`.
+ * @return : compressed size written into `dst` (<= `dstCapacity),
+ * or an error code if it fails (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize);
+
+
+/***************************************
+* Advanced decompression API
+***************************************/
+
+/* The advanced API pushes parameters one by one into an existing DCtx context.
+ * Parameters are sticky, and remain valid for all following frames
+ * using the same DCtx context.
+ * It's possible to reset parameters to default values using ZSTD_DCtx_reset().
+ * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream().
+ * Therefore, no new decompression function is necessary.
+ */
+
+typedef enum {
+
+ ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which
+ * the streaming API will refuse to allocate memory buffer
+ * in order to protect the host from unreasonable memory requirements.
+ * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+ * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT).
+ * Special: value 0 means "use default maximum windowLog". */
+
+ /* note : additional experimental parameters are also available
+ * within the experimental section of the API.
+ * At the time of this writing, they include :
+ * ZSTD_c_format
+ * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+ * note : never ever use experimentalParam? names directly
+ */
+ ZSTD_d_experimentalParam1=1000
+
+} ZSTD_dParameter;
+
+/*! ZSTD_dParam_getBounds() :
+ * All parameters must belong to an interval with lower and upper bounds,
+ * otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ * - an error status field, which must be tested using ZSTD_isError()
+ * - both lower and upper bounds, inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam);
+
+/*! ZSTD_DCtx_setParameter() :
+ * Set one compression parameter, selected by enum ZSTD_dParameter.
+ * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds().
+ * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ * Setting a parameter is only possible during frame initialization (before starting decompression).
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value);
+
+/*! ZSTD_DCtx_reset() :
+ * Return a DCtx to clean state.
+ * Session and parameters can be reset jointly or separately.
+ * Parameters can only be reset when no active frame is being decompressed.
+ * @return : 0, or an error code, which can be tested with ZSTD_isError()
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
/****************************
@@ -268,57 +563,153 @@
* A ZSTD_CStream object is required to track streaming operation.
* Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources.
* ZSTD_CStream objects can be reused multiple times on consecutive compression operations.
-* It is recommended to re-use ZSTD_CStream in situations where many streaming operations will be achieved consecutively,
-* since it will play nicer with system's memory, by re-using already allocated memory.
-* Use one separate ZSTD_CStream per thread for parallel execution.
+* It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory.
*
-* Start a new compression by initializing ZSTD_CStream.
-* Use ZSTD_initCStream() to start a new compression operation.
-* Use ZSTD_initCStream_usingDict() or ZSTD_initCStream_usingCDict() for a compression which requires a dictionary (experimental section)
+* For parallel execution, use one separate ZSTD_CStream per thread.
*
-* Use ZSTD_compressStream() repetitively to consume input stream.
-* The function will automatically update both `pos` fields.
-* Note that it may not consume the entire input, in which case `pos < size`,
-* and it's up to the caller to present again remaining data.
-* @return : a size hint, preferred nb of bytes to use as input for next function call
-* or an error code, which can be tested using ZSTD_isError().
-* Note 1 : it's just a hint, to help latency a little, any other value will work fine.
-* Note 2 : size hint is guaranteed to be <= ZSTD_CStreamInSize()
+* note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing.
*
-* At any moment, it's possible to flush whatever data remains within internal buffer, using ZSTD_flushStream().
-* `output->pos` will be updated.
-* Note that some content might still be left within internal buffer if `output->size` is too small.
-* @return : nb of bytes still present within internal buffer (0 if it's empty)
+* Parameters are sticky : when starting a new compression on the same context,
+* it will re-use the same sticky parameters as previous compression session.
+* When in doubt, it's recommended to fully initialize the context before usage.
+* Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(),
+* ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to
+* set more specific parameters, the pledged source size, or load a dictionary.
+*
+* Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to
+* consume input stream. The function will automatically update both `pos`
+* fields within `input` and `output`.
+* Note that the function may not consume the entire input, for example, because
+* the output buffer is already full, in which case `input.pos < input.size`.
+* The caller must check if input has been entirely consumed.
+* If not, the caller must make some room to receive more compressed data,
+* and then present again remaining input data.
+* note: ZSTD_e_continue is guaranteed to make some forward progress when called,
+* but doesn't guarantee maximal forward progress. This is especially relevant
+* when compressing with multiple threads. The call won't block if it can
+* consume some input, but if it can't it will wait for some, but not all,
+* output to be flushed.
+* @return : provides a minimum amount of data remaining to be flushed from internal buffers
+* or an error code, which can be tested using ZSTD_isError().
+*
+* At any moment, it's possible to flush whatever data might remain stuck within internal buffer,
+* using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated.
+* Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0).
+* In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush.
+* You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the
+* operation.
+* note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will
+* block until the flush is complete or the output buffer is full.
+* @return : 0 if internal buffers are entirely flushed,
+* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
* or an error code, which can be tested using ZSTD_isError().
*
-* ZSTD_endStream() instructs to finish a frame.
+* Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame.
* It will perform a flush and write frame epilogue.
* The epilogue is required for decoders to consider a frame completed.
-* ZSTD_endStream() may not be able to flush full data if `output->size` is too small.
-* In which case, call again ZSTD_endStream() to complete the flush.
+* flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush.
+* You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to
+* start a new frame.
+* note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will
+* block until the flush is complete or the output buffer is full.
* @return : 0 if frame fully completed and fully flushed,
- or >0 if some data is still present within internal buffer
- (value is minimum size estimation for remaining data to flush, but it could be more)
+* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
* or an error code, which can be tested using ZSTD_isError().
*
* *******************************************************************/
typedef ZSTD_CCtx ZSTD_CStream; /**< CCtx and CStream are now effectively same object (>= v1.3.0) */
- /* Continue to distinguish them for compatibility with versions <= v1.2.0 */
+ /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */
/*===== ZSTD_CStream management functions =====*/
ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void);
ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);
/*===== Streaming compression functions =====*/
-ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
-ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
-ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
-ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+typedef enum {
+ ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
+ ZSTD_e_flush=1, /* flush any data provided so far,
+ * it creates (at least) one new block, that can be decoded immediately on reception;
+ * frame will continue: any future data can still reference previously compressed data, improving compression.
+ * note : multithreaded compression will block to flush as much output as possible. */
+ ZSTD_e_end=2 /* flush any remaining data _and_ close current frame.
+ * note that frame is only closed after compressed data is fully flushed (return value == 0).
+ * After that point, any additional data starts a new frame.
+ * note : each frame is independent (does not reference any content from previous frame).
+ : note : multithreaded compression will block to flush as much output as possible. */
+} ZSTD_EndDirective;
+/*! ZSTD_compressStream2() :
+ * Behaves about the same as ZSTD_compressStream, with additional control on end directive.
+ * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
+ * - output->pos must be <= dstCapacity, input->pos must be <= srcSize
+ * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
+ * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
+ * - When nbWorkers>=1, function is non-blocking : it just acquires a copy of input, and distributes jobs to internal worker threads, flush whatever is available,
+ * and then immediately returns, just indicating that there is some data remaining to be flushed.
+ * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
+ * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
+ * - @return provides a minimum amount of data remaining to be flushed from internal buffers
+ * or an error code, which can be tested using ZSTD_isError().
+ * if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
+ * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
+ * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
+ * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
+ * only ZSTD_e_end or ZSTD_e_flush operations are allowed.
+ * Before starting a new compression job, or changing compression parameters,
+ * it is required to fully flush internal buffers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
+ ZSTD_outBuffer* output,
+ ZSTD_inBuffer* input,
+ ZSTD_EndDirective endOp);
+
+
+/* These buffer sizes are softly recommended.
+ * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output.
+ * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(),
+ * reducing the amount of memory shuffling and buffering, resulting in minor performance savings.
+ *
+ * However, note that these recommendations are from the perspective of a C caller program.
+ * If the streaming interface is invoked from some other language,
+ * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo,
+ * a major performance rule is to reduce crossing such interface to an absolute minimum.
+ * It's not rare that performance ends being spent more into the interface, rather than compression itself.
+ * In which cases, prefer using large buffers, as large as practical,
+ * for both input and output, to reduce the nb of roundtrips.
+ */
ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /**< recommended size for input buffer */
-ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block in all circumstances. */
+ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */
+/* *****************************************************************************
+ * This following is a legacy streaming API.
+ * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2().
+ * It is redundant, but remains fully supported.
+ * Advanced parameters and dictionary compression can only be used through the
+ * new API.
+ ******************************************************************************/
+
+/*!
+ * Equivalent to:
+ *
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ */
+ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
+/*!
+ * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue).
+ * NOTE: The return value is different. ZSTD_compressStream() returns a hint for
+ * the next read size (if non-zero and not an error). ZSTD_compressStream2()
+ * returns the minimum nb of bytes left to flush (if non-zero and not an error).
+ */
+ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */
+ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */
+ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+
/*-***************************************************************************
* Streaming decompression - HowTo
@@ -327,101 +718,374 @@
* Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources.
* ZSTD_DStream objects can be re-used multiple times.
*
-* Use ZSTD_initDStream() to start a new decompression operation,
-* or ZSTD_initDStream_usingDict() if decompression requires a dictionary.
-* @return : recommended first input size
+* Use ZSTD_initDStream() to start a new decompression operation.
+* @return : recommended first input size
+* Alternatively, use advanced API to set specific properties.
*
* Use ZSTD_decompressStream() repetitively to consume your input.
* The function will update both `pos` fields.
* If `input.pos < input.size`, some input has not been consumed.
* It's up to the caller to present again remaining data.
+* The function tries to flush all data decoded immediately, respecting output buffer size.
* If `output.pos < output.size`, decoder has flushed everything it could.
-* @return : 0 when a frame is completely decoded and fully flushed,
-* an error code, which can be tested using ZSTD_isError(),
-* any other value > 0, which means there is still some decoding to do to complete current frame.
-* The return value is a suggested next input size (a hint to improve latency) that will never load more than the current frame.
+* But if `output.pos == output.size`, there might be some data left within internal buffers.,
+* In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer.
+* Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX.
+* @return : 0 when a frame is completely decoded and fully flushed,
+* or an error code, which can be tested using ZSTD_isError(),
+* or any other value > 0, which means there is still some decoding or flushing to do to complete current frame :
+* the return value is a suggested next input size (just a hint for better latency)
+* that will never request more than the remaining frame size.
* *******************************************************************************/
typedef ZSTD_DCtx ZSTD_DStream; /**< DCtx and DStream are now effectively same object (>= v1.3.0) */
- /* For compatibility with versions <= v1.2.0, continue to consider them separated. */
+ /* For compatibility with versions <= v1.2.0, prefer differentiating them. */
/*===== ZSTD_DStream management functions =====*/
ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void);
ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);
/*===== Streaming decompression functions =====*/
+
+/* This function is redundant with the advanced API and equivalent to:
+ *
+ * ZSTD_DCtx_reset(zds);
+ * ZSTD_DCtx_refDDict(zds, NULL);
+ */
ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds);
+
ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */
ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */
+
+/**************************
+* Simple dictionary API
+***************************/
+/*! ZSTD_compress_usingDict() :
+ * Compression at an explicit compression level using a Dictionary.
+ * A dictionary can be any arbitrary data segment (also called a prefix),
+ * or a buffer with specified information (see dictBuilder/zdict.h).
+ * Note : This function loads the dictionary, resulting in significant startup delay.
+ * It's intended for a dictionary used only once.
+ * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize,
+ const void* dict,size_t dictSize,
+ int compressionLevel);
+
+/*! ZSTD_decompress_usingDict() :
+ * Decompression using a known Dictionary.
+ * Dictionary must be identical to the one used during compression.
+ * Note : This function loads the dictionary, resulting in significant startup delay.
+ * It's intended for a dictionary used only once.
+ * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize,
+ const void* dict,size_t dictSize);
+
+
+/***********************************
+ * Bulk processing dictionary API
+ **********************************/
+typedef struct ZSTD_CDict_s ZSTD_CDict;
+
+/*! ZSTD_createCDict() :
+ * When compressing multiple messages / blocks using the same dictionary, it's recommended to load it only once.
+ * ZSTD_createCDict() will create a digested dictionary, ready to start future compression operations without startup cost.
+ * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
+ * `dictBuffer` can be released after ZSTD_CDict creation, because its content is copied within CDict.
+ * Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate `dictBuffer` content.
+ * Note : A ZSTD_CDict can be created from an empty dictBuffer, but it is inefficient when used to compress small data. */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
+ int compressionLevel);
+
+/*! ZSTD_freeCDict() :
+ * Function frees memory allocated by ZSTD_createCDict(). */
+ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict);
+
+/*! ZSTD_compress_usingCDict() :
+ * Compression using a digested Dictionary.
+ * Recommended when same dictionary is used multiple times.
+ * Note : compression level is _decided at dictionary creation time_,
+ * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize,
+ const ZSTD_CDict* cdict);
+
+
+typedef struct ZSTD_DDict_s ZSTD_DDict;
+
+/*! ZSTD_createDDict() :
+ * Create a digested dictionary, ready to start decompression operation without startup delay.
+ * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
+
+/*! ZSTD_freeDDict() :
+ * Function frees memory allocated with ZSTD_createDDict() */
+ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict);
+
+/*! ZSTD_decompress_usingDDict() :
+ * Decompression using a digested Dictionary.
+ * Recommended when same dictionary is used multiple times. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize,
+ const ZSTD_DDict* ddict);
+
+
+/********************************
+ * Dictionary helper functions
+ *******************************/
+
+/*! ZSTD_getDictID_fromDict() :
+ * Provides the dictID stored within dictionary.
+ * if @return == 0, the dictionary is not conformant with Zstandard specification.
+ * It can still be loaded, but as a content-only dictionary. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
+
+/*! ZSTD_getDictID_fromDDict() :
+ * Provides the dictID of the dictionary loaded into `ddict`.
+ * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
+
+/*! ZSTD_getDictID_fromFrame() :
+ * Provides the dictID required to decompressed the frame stored within `src`.
+ * If @return == 0, the dictID could not be decoded.
+ * This could for one of the following reasons :
+ * - The frame does not require a dictionary to be decoded (most common case).
+ * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
+ * Note : this use case also happens when using a non-conformant dictionary.
+ * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
+ * - This is not a Zstandard frame.
+ * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
+
+
+/*******************************************************************************
+ * Advanced dictionary and prefix API
+ *
+ * This API allows dictionaries to be used with ZSTD_compress2(),
+ * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and
+ * only reset with the context is reset with ZSTD_reset_parameters or
+ * ZSTD_reset_session_and_parameters. Prefixes are single-use.
+ ******************************************************************************/
+
+
+/*! ZSTD_CCtx_loadDictionary() :
+ * Create an internal CDict from `dict` buffer.
+ * Decompression will have to use same dictionary.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary,
+ * meaning "return to no-dictionary mode".
+ * Note 1 : Dictionary is sticky, it will be used for all future compressed frames.
+ * To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters).
+ * Note 2 : Loading a dictionary involves building tables.
+ * It's also a CPU consuming operation, with non-negligible impact on latency.
+ * Tables are dependent on compression parameters, and for this reason,
+ * compression parameters can no longer be changed after loading a dictionary.
+ * Note 3 :`dict` content will be copied internally.
+ * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead.
+ * In such a case, dictionary buffer must outlive its users.
+ * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced()
+ * to precisely select how dictionary content must be interpreted. */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_refCDict() :
+ * Reference a prepared dictionary, to be used for all next compressed frames.
+ * Note that compression parameters are enforced from within CDict,
+ * and supersede any compression parameter previously set within CCtx.
+ * The parameters ignored are labled as "superseded-by-cdict" in the ZSTD_cParameter enum docs.
+ * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode.
+ * The dictionary will remain valid for future compressed frames using same CCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Special : Referencing a NULL CDict means "return to no-dictionary mode".
+ * Note 1 : Currently, only one dictionary can be managed.
+ * Referencing a new dictionary effectively "discards" any previous one.
+ * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */
+ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
+
+/*! ZSTD_CCtx_refPrefix() :
+ * Reference a prefix (single-usage dictionary) for next compressed frame.
+ * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end).
+ * Decompression will need same prefix to properly regenerate data.
+ * Compressing with a prefix is similar in outcome as performing a diff and compressing it,
+ * but performs much faster, especially during decompression (compression speed is tunable with compression level).
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary
+ * Note 1 : Prefix buffer is referenced. It **must** outlive compression.
+ * Its content must remain unmodified during compression.
+ * Note 2 : If the intention is to diff some large src data blob with some prior version of itself,
+ * ensure that the window size is large enough to contain the entire source.
+ * See ZSTD_c_windowLog.
+ * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters.
+ * It's a CPU consuming operation, with non-negligible impact on latency.
+ * If there is a need to use the same prefix multiple times, consider loadDictionary instead.
+ * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dm_rawContent).
+ * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
+ const void* prefix, size_t prefixSize);
+
+/*! ZSTD_DCtx_loadDictionary() :
+ * Create an internal DDict from dict buffer,
+ * to be used to decompress next frames.
+ * The dictionary remains valid for all future frames, until explicitly invalidated.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
+ * meaning "return to no-dictionary mode".
+ * Note 1 : Loading a dictionary involves building tables,
+ * which has a non-negligible impact on CPU usage and latency.
+ * It's recommended to "load once, use many times", to amortize the cost
+ * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading.
+ * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead.
+ * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of
+ * how dictionary content is loaded and interpreted.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_refDDict() :
+ * Reference a prepared dictionary, to be used to decompress next frames.
+ * The dictionary remains active for decompression of future frames using same DCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Note 1 : Currently, only one dictionary can be managed.
+ * Referencing a new dictionary effectively "discards" any previous one.
+ * Special: referencing a NULL DDict means "return to no-dictionary mode".
+ * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+/*! ZSTD_DCtx_refPrefix() :
+ * Reference a prefix (single-usage dictionary) to decompress next frame.
+ * This is the reverse operation of ZSTD_CCtx_refPrefix(),
+ * and must use the same prefix as the one used during compression.
+ * Prefix is **only used once**. Reference is discarded at end of frame.
+ * End of frame is reached when ZSTD_decompressStream() returns 0.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
+ * Note 2 : Prefix buffer is referenced. It **must** outlive decompression.
+ * Prefix buffer must remain unmodified up to the end of frame,
+ * reached when ZSTD_decompressStream() returns 0.
+ * Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent).
+ * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section)
+ * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost.
+ * A full dictionary is more costly, as it requires building tables.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx,
+ const void* prefix, size_t prefixSize);
+
+/* === Memory management === */
+
+/*! ZSTD_sizeof_*() :
+ * These functions give the _current_ memory usage of selected object.
+ * Note that object memory usage can evolve (increase or decrease) over time. */
+ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
+ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
+ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
+
#endif /* ZSTD_H_235446 */
-
-/****************************************************************************************
- * START OF ADVANCED AND EXPERIMENTAL FUNCTIONS
- * The definitions in this section are considered experimental.
- * They should never be used with a dynamic library, as prototypes may change in the future.
+/* **************************************************************************************
+ * ADVANCED AND EXPERIMENTAL FUNCTIONS
+ ****************************************************************************************
+ * The definitions in the following section are considered experimental.
* They are provided for advanced scenarios.
+ * They should never be used with a dynamic library, as prototypes may change in the future.
* Use them only in association with static linking.
* ***************************************************************************************/
#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
-/* --- Constants ---*/
-#define ZSTD_MAGICNUMBER 0xFD2FB528 /* >= v0.8.0 */
-#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50U
-#define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* >= v0.7.0 */
+/****************************************************************************************
+ * experimental API (static linking only)
+ ****************************************************************************************
+ * The following symbols and constants
+ * are not planned to join "stable API" status in the near future.
+ * They can still change in future versions.
+ * Some of them are planned to remain in the static_only section indefinitely.
+ * Some of them might be removed in the future (especially when redundant with existing stable functions)
+ * ***************************************************************************************/
-#define ZSTD_WINDOWLOG_MAX_32 30
-#define ZSTD_WINDOWLOG_MAX_64 31
-#define ZSTD_WINDOWLOG_MAX ((unsigned)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64))
-#define ZSTD_WINDOWLOG_MIN 10
-#define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30)
-#define ZSTD_HASHLOG_MIN 6
-#define ZSTD_CHAINLOG_MAX_32 29
-#define ZSTD_CHAINLOG_MAX_64 30
-#define ZSTD_CHAINLOG_MAX ((unsigned)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64))
-#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN
-#define ZSTD_HASHLOG3_MAX 17
-#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1)
-#define ZSTD_SEARCHLOG_MIN 1
-#define ZSTD_SEARCHLENGTH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */
-#define ZSTD_SEARCHLENGTH_MIN 3 /* only for ZSTD_btopt, other strategies are limited to 4 */
-#define ZSTD_TARGETLENGTH_MIN 1 /* only used by btopt, btultra and btfast */
-#define ZSTD_LDM_MINMATCH_MIN 4
-#define ZSTD_LDM_MINMATCH_MAX 4096
-#define ZSTD_LDM_BUCKETSIZELOG_MAX 8
-
-#define ZSTD_FRAMEHEADERSIZE_PREFIX 5 /* minimum input size to know frame header size */
+#define ZSTD_FRAMEHEADERSIZE_PREFIX 5 /* minimum input size required to query frame header size */
#define ZSTD_FRAMEHEADERSIZE_MIN 6
-#define ZSTD_FRAMEHEADERSIZE_MAX 18 /* for static allocation */
-static const size_t ZSTD_frameHeaderSize_prefix = ZSTD_FRAMEHEADERSIZE_PREFIX;
-static const size_t ZSTD_frameHeaderSize_min = ZSTD_FRAMEHEADERSIZE_MIN;
-static const size_t ZSTD_frameHeaderSize_max = ZSTD_FRAMEHEADERSIZE_MAX;
-static const size_t ZSTD_skippableHeaderSize = 8; /* magic number + skippable frame length */
+#define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */
+#define ZSTD_SKIPPABLEHEADERSIZE 8
+
+/* compression parameter bounds */
+#define ZSTD_WINDOWLOG_MAX_32 30
+#define ZSTD_WINDOWLOG_MAX_64 31
+#define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64))
+#define ZSTD_WINDOWLOG_MIN 10
+#define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30)
+#define ZSTD_HASHLOG_MIN 6
+#define ZSTD_CHAINLOG_MAX_32 29
+#define ZSTD_CHAINLOG_MAX_64 30
+#define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64))
+#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN
+#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1)
+#define ZSTD_SEARCHLOG_MIN 1
+#define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */
+#define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */
+#define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX
+#define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */
+#define ZSTD_STRATEGY_MIN ZSTD_fast
+#define ZSTD_STRATEGY_MAX ZSTD_btultra2
-/*--- Advanced types ---*/
-typedef enum { ZSTD_fast=1, ZSTD_dfast, ZSTD_greedy, ZSTD_lazy, ZSTD_lazy2,
- ZSTD_btlazy2, ZSTD_btopt, ZSTD_btultra } ZSTD_strategy; /* from faster to stronger */
+#define ZSTD_OVERLAPLOG_MIN 0
+#define ZSTD_OVERLAPLOG_MAX 9
+
+#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame
+ * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size,
+ * to preserve host's memory from unreasonable requirements.
+ * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,).
+ * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */
+
+
+/* LDM parameter bounds */
+#define ZSTD_LDM_HASHLOG_MIN ZSTD_HASHLOG_MIN
+#define ZSTD_LDM_HASHLOG_MAX ZSTD_HASHLOG_MAX
+#define ZSTD_LDM_MINMATCH_MIN 4
+#define ZSTD_LDM_MINMATCH_MAX 4096
+#define ZSTD_LDM_BUCKETSIZELOG_MIN 1
+#define ZSTD_LDM_BUCKETSIZELOG_MAX 8
+#define ZSTD_LDM_HASHRATELOG_MIN 0
+#define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN)
+
+/* Advanced parameter bounds */
+#define ZSTD_TARGETCBLOCKSIZE_MIN 64
+#define ZSTD_TARGETCBLOCKSIZE_MAX ZSTD_BLOCKSIZE_MAX
+
+/* internal */
+#define ZSTD_HASHLOG3_MAX 17
+
+
+/* --- Advanced types --- */
+
+typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params;
typedef struct {
- unsigned windowLog; /**< largest match distance : larger == more compression, more memory needed during decompression */
- unsigned chainLog; /**< fully searched segment : larger == more compression, slower, more memory (useless for fast) */
- unsigned hashLog; /**< dispatch table : larger == faster, more memory */
- unsigned searchLog; /**< nb of searches : larger == more compression, slower */
- unsigned searchLength; /**< match length searched : larger == faster decompression, sometimes less compression */
- unsigned targetLength; /**< acceptable match size for optimal parser (only) : larger == more compression, slower */
- ZSTD_strategy strategy;
+ unsigned windowLog; /**< largest match distance : larger == more compression, more memory needed during decompression */
+ unsigned chainLog; /**< fully searched segment : larger == more compression, slower, more memory (useless for fast) */
+ unsigned hashLog; /**< dispatch table : larger == faster, more memory */
+ unsigned searchLog; /**< nb of searches : larger == more compression, slower */
+ unsigned minMatch; /**< match length searched : larger == faster decompression, sometimes less compression */
+ unsigned targetLength; /**< acceptable match size for optimal parser (only) : larger == more compression, slower */
+ ZSTD_strategy strategy; /**< see ZSTD_strategy definition above */
} ZSTD_compressionParameters;
typedef struct {
- unsigned contentSizeFlag; /**< 1: content size will be in frame header (when known) */
- unsigned checksumFlag; /**< 1: generate a 32-bits checksum at end of frame, for error detection */
- unsigned noDictIDFlag; /**< 1: no dictID will be saved into frame header (if dictionary compression) */
+ int contentSizeFlag; /**< 1: content size will be in frame header (when known) */
+ int checksumFlag; /**< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */
+ int noDictIDFlag; /**< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */
} ZSTD_frameParameters;
typedef struct {
@@ -429,37 +1093,83 @@
ZSTD_frameParameters fParams;
} ZSTD_parameters;
-typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params;
-
typedef enum {
- ZSTD_dct_auto=0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */
- ZSTD_dct_rawContent, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */
- ZSTD_dct_fullDict /* refuses to load a dictionary if it does not respect Zstandard's specification */
+ ZSTD_dct_auto = 0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */
+ ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */
+ ZSTD_dct_fullDict = 2 /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */
} ZSTD_dictContentType_e;
typedef enum {
- ZSTD_dlm_byCopy = 0, /**< Copy dictionary content internally */
- ZSTD_dlm_byRef, /**< Reference dictionary content -- the dictionary buffer must outlive its users. */
+ ZSTD_dlm_byCopy = 0, /**< Copy dictionary content internally */
+ ZSTD_dlm_byRef = 1, /**< Reference dictionary content -- the dictionary buffer must outlive its users. */
} ZSTD_dictLoadMethod_e;
+typedef enum {
+ /* Opened question : should we have a format ZSTD_f_auto ?
+ * Today, it would mean exactly the same as ZSTD_f_zstd1.
+ * But, in the future, should several formats become supported,
+ * on the compression side, it would mean "default format".
+ * On the decompression side, it would mean "automatic format detection",
+ * so that ZSTD_f_zstd1 would mean "accept *only* zstd frames".
+ * Since meaning is a little different, another option could be to define different enums for compression and decompression.
+ * This question could be kept for later, when there are actually multiple formats to support,
+ * but there is also the question of pinning enum values, and pinning value `0` is especially important */
+ ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */
+ ZSTD_f_zstd1_magicless = 1, /* Variant of zstd frame format, without initial 4-bytes magic number.
+ * Useful to save 4 bytes per generated frame.
+ * Decoder cannot recognise automatically this format, requiring this instruction. */
+} ZSTD_format_e;
+
+typedef enum {
+ /* Note: this enum and the behavior it controls are effectively internal
+ * implementation details of the compressor. They are expected to continue
+ * to evolve and should be considered only in the context of extremely
+ * advanced performance tuning.
+ *
+ * Zstd currently supports the use of a CDict in two ways:
+ *
+ * - The contents of the CDict can be copied into the working context. This
+ * means that the compression can search both the dictionary and input
+ * while operating on a single set of internal tables. This makes
+ * the compression faster per-byte of input. However, the initial copy of
+ * the CDict's tables incurs a fixed cost at the beginning of the
+ * compression. For small compressions (< 8 KB), that copy can dominate
+ * the cost of the compression.
+ *
+ * - The CDict's tables can be used in-place. In this model, compression is
+ * slower per input byte, because the compressor has to search two sets of
+ * tables. However, this model incurs no start-up cost (as long as the
+ * working context's tables can be reused). For small inputs, this can be
+ * faster than copying the CDict's tables.
+ *
+ * Zstd has a simple internal heuristic that selects which strategy to use
+ * at the beginning of a compression. However, if experimentation shows that
+ * Zstd is making poor choices, it is possible to override that choice with
+ * this enum.
+ */
+ ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */
+ ZSTD_dictForceAttach = 1, /* Never copy the dictionary. */
+ ZSTD_dictForceCopy = 2, /* Always copy the dictionary. */
+} ZSTD_dictAttachPref_e;
+
+typedef enum {
+ ZSTD_lcm_auto = 0, /**< Automatically determine the compression mode based on the compression level.
+ * Negative compression levels will be uncompressed, and positive compression
+ * levels will be compressed. */
+ ZSTD_lcm_huffman = 1, /**< Always attempt Huffman compression. Uncompressed literals will still be
+ * emitted if Huffman compression is not profitable. */
+ ZSTD_lcm_uncompressed = 2, /**< Always emit uncompressed literals. */
+} ZSTD_literalCompressionMode_e;
/***************************************
* Frame size functions
***************************************/
-/*! ZSTD_findFrameCompressedSize() :
- * `src` should point to the start of a ZSTD encoded frame or skippable frame
- * `srcSize` must be >= first frame size
- * @return : the compressed size of the first frame starting at `src`,
- * suitable to pass to `ZSTD_decompress` or similar,
- * or an error code if input is invalid */
-ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
-
/*! ZSTD_findDecompressedSize() :
- * `src` should point the start of a series of ZSTD encoded and/or skippable frames
+ * `src` should point to the start of a series of ZSTD encoded and/or skippable frames
* `srcSize` must be the _exact_ size of this series
- * (i.e. there should be a frame boundary exactly at `srcSize` bytes after `src`)
+ * (i.e. there should be a frame boundary at `src + srcSize`)
* @return : - decompressed size of all data in all successive frames
* - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN
* - if an error occurred: ZSTD_CONTENTSIZE_ERROR
@@ -479,10 +1189,25 @@
* however it does mean that all frame data must be present and valid. */
ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize);
+/*! ZSTD_decompressBound() :
+ * `src` should point to the start of a series of ZSTD encoded and/or skippable frames
+ * `srcSize` must be the _exact_ size of this series
+ * (i.e. there should be a frame boundary at `src + srcSize`)
+ * @return : - upper-bound for the decompressed size of all data in all successive frames
+ * - if an error occured: ZSTD_CONTENTSIZE_ERROR
+ *
+ * note 1 : an error can occur if `src` contains an invalid or incorrectly formatted frame.
+ * note 2 : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`.
+ * in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value.
+ * note 3 : when the decompressed size field isn't available, the upper-bound for that frame is calculated by:
+ * upper-bound = # blocks * min(128 KB, Window_Size)
+ */
+ZSTDLIB_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize);
+
/*! ZSTD_frameHeaderSize() :
-* `src` should point to the start of a ZSTD frame
-* `srcSize` must be >= ZSTD_frameHeaderSize_prefix.
-* @return : size of the Frame Header */
+ * srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX.
+ * @return : size of the Frame Header,
+ * or an error code (if srcSize is too small) */
ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
@@ -490,16 +1215,6 @@
* Memory management
***************************************/
-/*! ZSTD_sizeof_*() :
- * These functions give the current memory usage of selected object.
- * Object memory usage can evolve when re-used. */
-ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
-ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
-ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
-ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
-ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
-ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
-
/*! ZSTD_estimate*() :
* These functions make it possible to estimate memory usage
* of a future {D,C}Ctx, before its creation.
@@ -507,7 +1222,7 @@
* It will also consider src size to be arbitrarily "large", which is worst case.
* If srcSize is known to always be small, ZSTD_estimateCCtxSize_usingCParams() can provide a tighter estimation.
* ZSTD_estimateCCtxSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
- * ZSTD_estimateCCtxSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParam_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_p_nbWorkers is >= 1.
+ * ZSTD_estimateCCtxSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
* Note : CCtx size estimation is only correct for single-threaded compression. */
ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel);
ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams);
@@ -519,7 +1234,7 @@
* It will also consider src size to be arbitrarily "large", which is worst case.
* If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation.
* ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
- * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParam_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_p_nbWorkers is >= 1.
+ * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
* Note : CStream size estimation is only correct for single-threaded compression.
* ZSTD_DStream memory budget depends on window Size.
* This information can be passed manually, using ZSTD_estimateDStreamSize,
@@ -582,6 +1297,7 @@
ZSTD_dictLoadMethod_e dictLoadMethod,
ZSTD_dictContentType_e dictContentType);
+
/*! Custom memory allocation :
* These prototypes make it possible to pass your own allocation/free functions.
* ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below.
@@ -616,46 +1332,201 @@
/*! ZSTD_createCDict_byReference() :
* Create a digested dictionary for compression
- * Dictionary content is simply referenced, and therefore stays in dictBuffer.
- * It is important that dictBuffer outlives CDict, it must remain read accessible throughout the lifetime of CDict */
+ * Dictionary content is just referenced, not duplicated.
+ * As a consequence, `dictBuffer` **must** outlive CDict,
+ * and its content must remain unmodified throughout the lifetime of CDict. */
ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel);
/*! ZSTD_getCParams() :
-* @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
-* `estimatedSrcSize` value is optional, select 0 if not known */
+ * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
+ * `estimatedSrcSize` value is optional, select 0 if not known */
ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
/*! ZSTD_getParams() :
-* same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
-* All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
+ * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
+ * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
/*! ZSTD_checkCParams() :
-* Ensure param values remain within authorized range */
+ * Ensure param values remain within authorized range.
+ * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */
ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params);
/*! ZSTD_adjustCParams() :
* optimize params for a given `srcSize` and `dictSize`.
- * both values are optional, select `0` if unknown. */
+ * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN.
+ * `dictSize` must be `0` when there is no dictionary.
+ * cPar can be invalid : all parameters will be clamped within valid range in the @return struct.
+ * This function never fails (wide contract) */
ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize);
/*! ZSTD_compress_advanced() :
-* Same as ZSTD_compress_usingDict(), with fine-tune control over each compression parameter */
-ZSTDLIB_API size_t ZSTD_compress_advanced (ZSTD_CCtx* cctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const void* dict,size_t dictSize,
- ZSTD_parameters params);
+ * Same as ZSTD_compress_usingDict(), with fine-tune control over compression parameters (by structure) */
+ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx,
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize,
+ const void* dict,size_t dictSize,
+ ZSTD_parameters params);
/*! ZSTD_compress_usingCDict_advanced() :
-* Same as ZSTD_compress_usingCDict(), with fine-tune control over frame parameters */
+ * Same as ZSTD_compress_usingCDict(), with fine-tune control over frame parameters */
ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const ZSTD_CDict* cdict, ZSTD_frameParameters fParams);
+ void* dst, size_t dstCapacity,
+ const void* src, size_t srcSize,
+ const ZSTD_CDict* cdict,
+ ZSTD_frameParameters fParams);
-/*--- Advanced decompression functions ---*/
+/*! ZSTD_CCtx_loadDictionary_byReference() :
+ * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx.
+ * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_loadDictionary_advanced() :
+ * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over
+ * how to load the dictionary (by copy ? by reference ?)
+ * and how to interpret it (automatic ? force raw mode ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_CCtx_refPrefix_advanced() :
+ * Same as ZSTD_CCtx_refPrefix(), but gives finer control over
+ * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/* === experimental parameters === */
+/* these parameters can be used with ZSTD_setParameter()
+ * they are not guaranteed to remain supported in the future */
+
+ /* Enables rsyncable mode,
+ * which makes compressed files more rsync friendly
+ * by adding periodic synchronization points to the compressed data.
+ * The target average block size is ZSTD_c_jobSize / 2.
+ * It's possible to modify the job size to increase or decrease
+ * the granularity of the synchronization point.
+ * Once the jobSize is smaller than the window size,
+ * it will result in compression ratio degradation.
+ * NOTE 1: rsyncable mode only works when multithreading is enabled.
+ * NOTE 2: rsyncable performs poorly in combination with long range mode,
+ * since it will decrease the effectiveness of synchronization points,
+ * though mileage may vary.
+ * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s.
+ * If the selected compression level is already running significantly slower,
+ * the overall speed won't be significantly impacted.
+ */
+ #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1
+
+/* Select a compression format.
+ * The value must be of type ZSTD_format_e.
+ * See ZSTD_format_e enum definition for details */
+#define ZSTD_c_format ZSTD_c_experimentalParam2
+
+/* Force back-reference distances to remain < windowSize,
+ * even when referencing into Dictionary content (default:0) */
+#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3
+
+/* Controls whether the contents of a CDict
+ * are used in place, or copied into the working context.
+ * Accepts values from the ZSTD_dictAttachPref_e enum.
+ * See the comments on that enum for an explanation of the feature. */
+#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4
+
+/* Controls how the literals are compressed (default is auto).
+ * The value must be of type ZSTD_literalCompressionMode_e.
+ * See ZSTD_literalCompressionMode_t enum definition for details.
+ */
+#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5
+
+/* Tries to fit compressed block size to be around targetCBlockSize.
+ * No target when targetCBlockSize == 0.
+ * There is no guarantee on compressed block size (default:0) */
+#define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6
+
+/*! ZSTD_CCtx_getParameter() :
+ * Get the requested compression parameter value, selected by enum ZSTD_cParameter,
+ * and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value);
+
+
+/*! ZSTD_CCtx_params :
+ * Quick howto :
+ * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
+ * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into
+ * an existing ZSTD_CCtx_params structure.
+ * This is similar to
+ * ZSTD_CCtx_setParameter().
+ * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
+ * an existing CCtx.
+ * These parameters will be applied to
+ * all subsequent frames.
+ * - ZSTD_compressStream2() : Do compression using the CCtx.
+ * - ZSTD_freeCCtxParams() : Free the memory.
+ *
+ * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
+ * for static allocation of CCtx for single-threaded compression.
+ */
+ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
+ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);
+
+/*! ZSTD_CCtxParams_reset() :
+ * Reset params to default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params);
+
+/*! ZSTD_CCtxParams_init() :
+ * Initializes the compression parameters of cctxParams according to
+ * compression level. All other parameters are reset to their default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel);
+
+/*! ZSTD_CCtxParams_init_advanced() :
+ * Initializes the compression and frame parameters of cctxParams according to
+ * params. All other parameters are reset to their default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
+
+/*! ZSTD_CCtxParams_setParameter() :
+ * Similar to ZSTD_CCtx_setParameter.
+ * Set one compression parameter, selected by enum ZSTD_cParameter.
+ * Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtxParams_getParameter() :
+ * Similar to ZSTD_CCtx_getParameter.
+ * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
+
+/*! ZSTD_CCtx_setParametersUsingCCtxParams() :
+ * Apply a set of ZSTD_CCtx_params to the compression context.
+ * This can be done even after compression is started,
+ * if nbWorkers==0, this will have no impact until a new compression is started.
+ * if nbWorkers>=1, new parameters will be picked up at next job,
+ * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams(
+ ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
+
+/*! ZSTD_compressStream2_simpleArgs() :
+ * Same as ZSTD_compressStream2(),
+ * but using only integral types as arguments.
+ * This variant might be helpful for binders from dynamic languages
+ * which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2_simpleArgs (
+ ZSTD_CCtx* cctx,
+ void* dst, size_t dstCapacity, size_t* dstPos,
+ const void* src, size_t srcSize, size_t* srcPos,
+ ZSTD_EndDirective endOp);
+
+
+/***************************************
+* Advanced decompression functions
+***************************************/
/*! ZSTD_isFrame() :
* Tells if the content of `buffer` starts with a valid Frame Identifier.
@@ -671,78 +1542,201 @@
* it must remain read accessible throughout the lifetime of DDict */
ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize);
+/*! ZSTD_DCtx_loadDictionary_byReference() :
+ * Same as ZSTD_DCtx_loadDictionary(),
+ * but references `dict` content instead of copying it into `dctx`.
+ * This saves memory if `dict` remains around.,
+ * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
-/*! ZSTD_getDictID_fromDict() :
- * Provides the dictID stored within dictionary.
- * if @return == 0, the dictionary is not conformant with Zstandard specification.
- * It can still be loaded, but as a content-only dictionary. */
-ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
+/*! ZSTD_DCtx_loadDictionary_advanced() :
+ * Same as ZSTD_DCtx_loadDictionary(),
+ * but gives direct control over
+ * how to load the dictionary (by copy ? by reference ?)
+ * and how to interpret it (automatic ? force raw mode ? full mode only ?). */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
-/*! ZSTD_getDictID_fromDDict() :
- * Provides the dictID of the dictionary loaded into `ddict`.
- * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
- * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
-ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
+/*! ZSTD_DCtx_refPrefix_advanced() :
+ * Same as ZSTD_DCtx_refPrefix(), but gives finer control over
+ * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
-/*! ZSTD_getDictID_fromFrame() :
- * Provides the dictID required to decompressed the frame stored within `src`.
- * If @return == 0, the dictID could not be decoded.
- * This could for one of the following reasons :
- * - The frame does not require a dictionary to be decoded (most common case).
- * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
- * Note : this use case also happens when using a non-conformant dictionary.
- * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
- * - This is not a Zstandard frame.
- * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
-ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
+/*! ZSTD_DCtx_setMaxWindowSize() :
+ * Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
+ * This protects a decoder context from reserving too much memory for itself (potential attack scenario).
+ * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+ * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT)
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
+
+/* ZSTD_d_format
+ * experimental parameter,
+ * allowing selection between ZSTD_format_e input compression formats
+ */
+#define ZSTD_d_format ZSTD_d_experimentalParam1
+
+/*! ZSTD_DCtx_setFormat() :
+ * Instruct the decoder context about what kind of data to decode next.
+ * This instruction is mandatory to decode data without a fully-formed header,
+ * such ZSTD_f_zstd1_magicless for example.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+
+/*! ZSTD_decompressStream_simpleArgs() :
+ * Same as ZSTD_decompressStream(),
+ * but using only integral types as arguments.
+ * This can be helpful for binders from dynamic languages
+ * which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs (
+ ZSTD_DCtx* dctx,
+ void* dst, size_t dstCapacity, size_t* dstPos,
+ const void* src, size_t srcSize, size_t* srcPos);
/********************************************************************
* Advanced streaming functions
+* Warning : most of these functions are now redundant with the Advanced API.
+* Once Advanced API reaches "stable" status,
+* redundant functions will be deprecated, and then at some point removed.
********************************************************************/
/*===== Advanced Streaming compression functions =====*/
-ZSTDLIB_API size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, int compressionLevel, unsigned long long pledgedSrcSize); /**< pledgedSrcSize must be correct. If it is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, "0" also disables frame content size field. It may be enabled in the future. */
-ZSTDLIB_API size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, const void* dict, size_t dictSize, int compressionLevel); /**< creates of an internal CDict (incompatible with static CCtx), except if dict == NULL or dictSize < 8, in which case no dict is used. Note: dict is loaded with ZSTD_dm_auto (treated as a full zstd dictionary if it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.*/
+/**! ZSTD_initCStream_srcSize() :
+ * This function is deprecated, and equivalent to:
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
+ * pledgedSrcSize must be correct. If it is not known at init time, use
+ * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs,
+ * "0" also disables frame content size field. It may be enabled in the future.
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, int compressionLevel, unsigned long long pledgedSrcSize);
+/**! ZSTD_initCStream_usingDict() :
+ * This function is deprecated, and is equivalent to:
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * Creates of an internal CDict (incompatible with static CCtx), except if
+ * dict == NULL or dictSize < 8, in which case no dict is used.
+ * Note: dict is loaded with ZSTD_dm_auto (treated as a full zstd dictionary if
+ * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, const void* dict, size_t dictSize, int compressionLevel);
+/**! ZSTD_initCStream_advanced() :
+ * This function is deprecated, and is approximately equivalent to:
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_setZstdParams(zcs, params); // Set the zstd params and leave the rest as-is
+ * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * pledgedSrcSize must be correct. If srcSize is not known at init time, use
+ * value ZSTD_CONTENTSIZE_UNKNOWN. dict is loaded with ZSTD_dm_auto and ZSTD_dlm_byCopy.
+ */
ZSTDLIB_API size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, const void* dict, size_t dictSize,
- ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize must be correct. If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. dict is loaded with ZSTD_dm_auto and ZSTD_dlm_byCopy. */
-ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); /**< note : cdict will just be referenced, and must outlive compression session */
-ZSTDLIB_API size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict* cdict, ZSTD_frameParameters fParams, unsigned long long pledgedSrcSize); /**< same as ZSTD_initCStream_usingCDict(), with control over frame parameters. pledgedSrcSize must be correct. If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. */
+ ZSTD_parameters params, unsigned long long pledgedSrcSize);
+/**! ZSTD_initCStream_usingCDict() :
+ * This function is deprecated, and equivalent to:
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * note : cdict will just be referenced, and must outlive compression session
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);
+/**! ZSTD_initCStream_usingCDict_advanced() :
+ * This function is deprecated, and is approximately equivalent to:
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_setZstdFrameParams(zcs, fParams); // Set the zstd frame params and leave the rest as-is
+ * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ * ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * same as ZSTD_initCStream_usingCDict(), with control over frame parameters.
+ * pledgedSrcSize must be correct. If srcSize is not known at init time, use
+ * value ZSTD_CONTENTSIZE_UNKNOWN.
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict* cdict, ZSTD_frameParameters fParams, unsigned long long pledgedSrcSize);
/*! ZSTD_resetCStream() :
- * start a new compression job, using same parameters from previous job.
- * This is typically useful to skip dictionary loading stage, since it will re-use it in-place..
+ * This function is deprecated, and is equivalent to:
+ * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
+ * start a new frame, using same parameters from previous frame.
+ * This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
* Note that zcs must be init at least once before using ZSTD_resetCStream().
* If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN.
* If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end.
* For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs,
* but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead.
- * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
+ * @return : 0, or an error code (which can be tested using ZSTD_isError())
+ */
ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
typedef struct {
- unsigned long long ingested;
- unsigned long long consumed;
- unsigned long long produced;
+ unsigned long long ingested; /* nb input bytes read and buffered */
+ unsigned long long consumed; /* nb input bytes actually compressed */
+ unsigned long long produced; /* nb of compressed bytes generated and buffered */
+ unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */
+ unsigned currentJobID; /* MT only : latest started job nb */
+ unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */
} ZSTD_frameProgression;
-/* ZSTD_getFrameProgression():
+/* ZSTD_getFrameProgression() :
* tells how much data has been ingested (read from input)
* consumed (input actually compressed) and produced (output) for current frame.
- * Therefore, (ingested - consumed) is amount of input data buffered internally, not yet compressed.
- * Can report progression inside worker threads (multi-threading and non-blocking mode).
+ * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed.
+ * Aggregates progression inside active worker threads.
*/
-ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx);
+ZSTDLIB_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx);
+/*! ZSTD_toFlushNow() :
+ * Tell how many bytes are ready to be flushed immediately.
+ * Useful for multithreading scenarios (nbWorkers >= 1).
+ * Probe the oldest active job, defined as oldest job not yet entirely flushed,
+ * and check its output buffer.
+ * @return : amount of data stored in oldest job and ready to be flushed immediately.
+ * if @return == 0, it means either :
+ * + there is no active job (could be checked with ZSTD_frameProgression()), or
+ * + oldest job is still actively compressing data,
+ * but everything it has produced has also been flushed so far,
+ * therefore flush speed is limited by production speed of oldest job
+ * irrespective of the speed of concurrent (and newer) jobs.
+ */
+ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
/*===== Advanced Streaming decompression functions =====*/
-typedef enum { DStream_p_maxWindowSize } ZSTD_DStreamParameter_e;
-ZSTDLIB_API size_t ZSTD_setDStreamParameter(ZSTD_DStream* zds, ZSTD_DStreamParameter_e paramType, unsigned paramValue); /* obsolete : this API will be removed in a future version */
-ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: no dictionary will be used if dict == NULL or dictSize < 8 */
-ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); /**< note : ddict is referenced, it must outlive decompression session */
-ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); /**< re-use decompression parameters from previous init; saves dictionary loading */
+/**
+ * This function is deprecated, and is equivalent to:
+ *
+ * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ * ZSTD_DCtx_loadDictionary(zds, dict, dictSize);
+ *
+ * note: no dictionary will be used if dict == NULL or dictSize < 8
+ */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize);
+/**
+ * This function is deprecated, and is equivalent to:
+ *
+ * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ * ZSTD_DCtx_refDDict(zds, ddict);
+ *
+ * note : ddict is referenced, it must outlive decompression session
+ */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);
+/**
+ * This function is deprecated, and is equivalent to:
+ *
+ * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *
+ * re-use decompression parameters from previous init; saves dictionary loading
+ */
+ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
/*********************************************************************
@@ -880,7 +1874,17 @@
unsigned dictID;
unsigned checksumFlag;
} ZSTD_frameHeader;
+
+/*! ZSTD_getFrameHeader() :
+ * decode Frame Header, or requires larger `srcSize`.
+ * @return : 0, `zfhPtr` is correctly filled,
+ * >0, `srcSize` is too small, value is wanted `srcSize` amount,
+ * or an error code, which can be tested using ZSTD_isError() */
ZSTDLIB_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /**< doesn't consume input */
+/*! ZSTD_getFrameHeader_advanced() :
+ * same as ZSTD_getFrameHeader(),
+ * with added capability to select a format (like ZSTD_f_zstd1_magicless) */
+ZSTDLIB_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format);
ZSTDLIB_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */
ZSTDLIB_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx);
@@ -897,462 +1901,6 @@
-/* ============================================ */
-/** New advanced API (experimental) */
-/* ============================================ */
-
-/* notes on API design :
- * In this proposal, parameters are pushed one by one into an existing context,
- * and then applied on all subsequent compression jobs.
- * When no parameter is ever provided, CCtx is created with compression level ZSTD_CLEVEL_DEFAULT.
- *
- * This API is intended to replace all others advanced / experimental API entry points.
- * But it stands a reasonable chance to become "stable", after a reasonable testing period.
- */
-
-/* note on naming convention :
- * Initially, the API favored names like ZSTD_setCCtxParameter() .
- * In this proposal, convention is changed towards ZSTD_CCtx_setParameter() .
- * The main driver is that it identifies more clearly the target object type.
- * It feels clearer when considering multiple targets :
- * ZSTD_CDict_setParameter() (rather than ZSTD_setCDictParameter())
- * ZSTD_CCtxParams_setParameter() (rather than ZSTD_setCCtxParamsParameter() )
- * etc...
- */
-
-/* note on enum design :
- * All enum will be pinned to explicit values before reaching "stable API" status */
-
-typedef enum {
- /* Opened question : should we have a format ZSTD_f_auto ?
- * Today, it would mean exactly the same as ZSTD_f_zstd1.
- * But, in the future, should several formats become supported,
- * on the compression side, it would mean "default format".
- * On the decompression side, it would mean "automatic format detection",
- * so that ZSTD_f_zstd1 would mean "accept *only* zstd frames".
- * Since meaning is a little different, another option could be to define different enums for compression and decompression.
- * This question could be kept for later, when there are actually multiple formats to support,
- * but there is also the question of pinning enum values, and pinning value `0` is especially important */
- ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */
- ZSTD_f_zstd1_magicless, /* Variant of zstd frame format, without initial 4-bytes magic number.
- * Useful to save 4 bytes per generated frame.
- * Decoder cannot recognise automatically this format, requiring instructions. */
-} ZSTD_format_e;
-
-typedef enum {
- /* compression format */
- ZSTD_p_format = 10, /* See ZSTD_format_e enum definition.
- * Cast selected format as unsigned for ZSTD_CCtx_setParameter() compatibility. */
-
- /* compression parameters */
- ZSTD_p_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
- * Default level is ZSTD_CLEVEL_DEFAULT==3.
- * Special: value 0 means "do not change cLevel".
- * Note 1 : it's possible to pass a negative compression level by casting it to unsigned type.
- * Note 2 : setting a level sets all default values of other compression parameters.
- * Note 3 : setting compressionLevel automatically updates ZSTD_p_compressLiterals. */
- ZSTD_p_windowLog, /* Maximum allowed back-reference distance, expressed as power of 2.
- * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
- * Special: value 0 means "use default windowLog".
- * Note: Using a window size greater than ZSTD_MAXWINDOWSIZE_DEFAULT (default: 2^27)
- * requires explicitly allowing such window size during decompression stage. */
- ZSTD_p_hashLog, /* Size of the probe table, as a power of 2.
- * Resulting table size is (1 << (hashLog+2)).
- * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
- * Larger tables improve compression ratio of strategies <= dFast,
- * and improve speed of strategies > dFast.
- * Special: value 0 means "use default hashLog". */
- ZSTD_p_chainLog, /* Size of the full-search table, as a power of 2.
- * Resulting table size is (1 << (chainLog+2)).
- * Larger tables result in better and slower compression.
- * This parameter is useless when using "fast" strategy.
- * Special: value 0 means "use default chainLog". */
- ZSTD_p_searchLog, /* Number of search attempts, as a power of 2.
- * More attempts result in better and slower compression.
- * This parameter is useless when using "fast" and "dFast" strategies.
- * Special: value 0 means "use default searchLog". */
- ZSTD_p_minMatch, /* Minimum size of searched matches (note : repCode matches can be smaller).
- * Larger values make faster compression and decompression, but decrease ratio.
- * Must be clamped between ZSTD_SEARCHLENGTH_MIN and ZSTD_SEARCHLENGTH_MAX.
- * Note that currently, for all strategies < btopt, effective minimum is 4.
- * , for all strategies > fast, effective maximum is 6.
- * Special: value 0 means "use default minMatchLength". */
- ZSTD_p_targetLength, /* Impact of this field depends on strategy.
- * For strategies btopt & btultra:
- * Length of Match considered "good enough" to stop search.
- * Larger values make compression stronger, and slower.
- * For strategy fast:
- * Distance between match sampling.
- * Larger values make compression faster, and weaker.
- * Special: value 0 means "use default targetLength". */
- ZSTD_p_compressionStrategy, /* See ZSTD_strategy enum definition.
- * Cast selected strategy as unsigned for ZSTD_CCtx_setParameter() compatibility.
- * The higher the value of selected strategy, the more complex it is,
- * resulting in stronger and slower compression.
- * Special: value 0 means "use default strategy". */
-
- ZSTD_p_enableLongDistanceMatching=160, /* Enable long distance matching.
- * This parameter is designed to improve compression ratio
- * for large inputs, by finding large matches at long distance.
- * It increases memory usage and window size.
- * Note: enabling this parameter increases ZSTD_p_windowLog to 128 MB
- * except when expressly set to a different value. */
- ZSTD_p_ldmHashLog, /* Size of the table for long distance matching, as a power of 2.
- * Larger values increase memory usage and compression ratio,
- * but decrease compression speed.
- * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
- * default: windowlog - 7.
- * Special: value 0 means "automatically determine hashlog". */
- ZSTD_p_ldmMinMatch, /* Minimum match size for long distance matcher.
- * Larger/too small values usually decrease compression ratio.
- * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
- * Special: value 0 means "use default value" (default: 64). */
- ZSTD_p_ldmBucketSizeLog, /* Log size of each bucket in the LDM hash table for collision resolution.
- * Larger values improve collision resolution but decrease compression speed.
- * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX .
- * Special: value 0 means "use default value" (default: 3). */
- ZSTD_p_ldmHashEveryLog, /* Frequency of inserting/looking up entries in the LDM hash table.
- * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
- * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
- * Larger values improve compression speed.
- * Deviating far from default value will likely result in a compression ratio decrease.
- * Special: value 0 means "automatically determine hashEveryLog". */
-
- /* frame parameters */
- ZSTD_p_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
- * Content size must be known at the beginning of compression,
- * it is provided using ZSTD_CCtx_setPledgedSrcSize() */
- ZSTD_p_checksumFlag, /* A 32-bits checksum of content is written at end of frame (default:0) */
- ZSTD_p_dictIDFlag, /* When applicable, dictionary's ID is written into frame header (default:1) */
-
- /* multi-threading parameters */
- /* These parameters are only useful if multi-threading is enabled (ZSTD_MULTITHREAD).
- * They return an error otherwise. */
- ZSTD_p_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel.
- * When nbWorkers >= 1, triggers asynchronous mode :
- * ZSTD_compress_generic() consumes some input, flush some output if possible, and immediately gives back control to caller,
- * while compression work is performed in parallel, within worker threads.
- * (note : a strong exception to this rule is when first invocation sets ZSTD_e_end : it becomes a blocking call).
- * More workers improve speed, but also increase memory usage.
- * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */
- ZSTD_p_jobSize, /* Size of a compression job. This value is enforced only in non-blocking mode.
- * Each compression job is completed in parallel, so this value indirectly controls the nb of active threads.
- * 0 means default, which is dynamically determined based on compression parameters.
- * Job size must be a minimum of overlapSize, or 1 MB, whichever is largest.
- * The minimum size is automatically and transparently enforced */
- ZSTD_p_overlapSizeLog, /* Size of previous input reloaded at the beginning of each job.
- * 0 => no overlap, 6(default) => use 1/8th of windowSize, >=9 => use full windowSize */
-
- /* =================================================================== */
- /* experimental parameters - no stability guaranteed */
- /* =================================================================== */
-
- ZSTD_p_compressLiterals=1000, /* control huffman compression of literals (enabled) by default.
- * disabling it improves speed and decreases compression ratio by a large amount.
- * note : this setting is automatically updated when changing compression level.
- * positive compression levels set ZSTD_p_compressLiterals to 1.
- * negative compression levels set ZSTD_p_compressLiterals to 0. */
-
- ZSTD_p_forceMaxWindow=1100, /* Force back-reference distances to remain < windowSize,
- * even when referencing into Dictionary content (default:0) */
-
-} ZSTD_cParameter;
-
-
-/*! ZSTD_CCtx_setParameter() :
- * Set one compression parameter, selected by enum ZSTD_cParameter.
- * Setting a parameter is generally only possible during frame initialization (before starting compression),
- * except for a few exceptions which can be updated during compression: compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
- * Note : when `value` is an enum, cast it to unsigned for proper type checking.
- * @result : informational value (typically, value being set clamped correctly),
- * or an error code (which can be tested with ZSTD_isError()). */
-ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, unsigned value);
-
-/*! ZSTD_CCtx_setPledgedSrcSize() :
- * Total input data size to be compressed as a single frame.
- * This value will be controlled at the end, and result in error if not respected.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Note 1 : 0 means zero, empty.
- * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
- * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new compression job.
- * Note 2 : If all data is provided and consumed in a single round,
- * this value is overriden by srcSize instead. */
-ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
-
-/*! ZSTD_CCtx_loadDictionary() :
- * Create an internal CDict from `dict` buffer.
- * Decompression will have to use same dictionary.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Special: Adding a NULL (or 0-size) dictionary invalidates previous dictionary,
- * meaning "return to no-dictionary mode".
- * Note 1 : Dictionary will be used for all future compression jobs.
- * To return to "no-dictionary" situation, load a NULL dictionary
- * Note 2 : Loading a dictionary involves building tables, which are dependent on compression parameters.
- * For this reason, compression parameters cannot be changed anymore after loading a dictionary.
- * It's also a CPU consuming operation, with non-negligible impact on latency.
- * Note 3 :`dict` content will be copied internally.
- * Use ZSTD_CCtx_loadDictionary_byReference() to reference dictionary content instead.
- * In such a case, dictionary buffer must outlive its users.
- * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced()
- * to precisely select how dictionary content must be interpreted. */
-ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
-ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
-ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
-
-
-/*! ZSTD_CCtx_refCDict() :
- * Reference a prepared dictionary, to be used for all next compression jobs.
- * Note that compression parameters are enforced from within CDict,
- * and supercede any compression parameter previously set within CCtx.
- * The dictionary will remain valid for future compression jobs using same CCtx.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Special : adding a NULL CDict means "return to no-dictionary mode".
- * Note 1 : Currently, only one dictionary can be managed.
- * Adding a new dictionary effectively "discards" any previous one.
- * Note 2 : CDict is just referenced, its lifetime must outlive CCtx. */
-ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
-
-/*! ZSTD_CCtx_refPrefix() :
- * Reference a prefix (single-usage dictionary) for next compression job.
- * Decompression need same prefix to properly regenerate data.
- * Prefix is **only used once**. Tables are discarded at end of compression job.
- * Subsequent compression jobs will be done without prefix (if none is explicitly referenced).
- * If there is a need to use same prefix multiple times, consider embedding it into a ZSTD_CDict instead.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary
- * Note 1 : Prefix buffer is referenced. It must outlive compression job.
- * Note 2 : Referencing a prefix involves building tables, which are dependent on compression parameters.
- * It's a CPU consuming operation, with non-negligible impact on latency.
- * Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent).
- * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode. */
-ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize);
-ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
-
-/*! ZSTD_CCtx_reset() :
- * Return a CCtx to clean state.
- * Useful after an error, or to interrupt an ongoing compression job and start a new one.
- * Any internal data not yet flushed is cancelled.
- * Dictionary (if any) is dropped.
- * All parameters are back to default values.
- * It's possible to modify compression parameters after a reset.
- */
-ZSTDLIB_API void ZSTD_CCtx_reset(ZSTD_CCtx* cctx);
-
-
-
-typedef enum {
- ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal conditions */
- ZSTD_e_flush, /* flush any data provided so far - frame will continue, future data can still reference previous data for better compression */
- ZSTD_e_end /* flush any remaining data and close current frame. Any additional data starts a new frame. */
-} ZSTD_EndDirective;
-
-/*! ZSTD_compress_generic() :
- * Behave about the same as ZSTD_compressStream. To note :
- * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_setParameter()
- * - Compression parameters cannot be changed once compression is started.
- * - outpot->pos must be <= dstCapacity, input->pos must be <= srcSize
- * - outpot->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
- * - In single-thread mode (default), function is blocking : it completed its job before returning to caller.
- * - In multi-thread mode, function is non-blocking : it just acquires a copy of input, and distribute job to internal worker threads,
- * and then immediately returns, just indicating that there is some data remaining to be flushed.
- * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
- * - Exception : in multi-threading mode, if the first call requests a ZSTD_e_end directive, it is blocking : it will complete compression before giving back control to caller.
- * - @return provides a minimum amount of data remaining to be flushed from internal buffers
- * or an error code, which can be tested using ZSTD_isError().
- * if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
- * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
- * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
- * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
- * only ZSTD_e_end or ZSTD_e_flush operations are allowed.
- * Before starting a new compression job, or changing compression parameters,
- * it is required to fully flush internal buffers.
- */
-ZSTDLIB_API size_t ZSTD_compress_generic (ZSTD_CCtx* cctx,
- ZSTD_outBuffer* output,
- ZSTD_inBuffer* input,
- ZSTD_EndDirective endOp);
-
-
-/*! ZSTD_compress_generic_simpleArgs() :
- * Same as ZSTD_compress_generic(),
- * but using only integral types as arguments.
- * Argument list is larger than ZSTD_{in,out}Buffer,
- * but can be helpful for binders from dynamic languages
- * which have troubles handling structures containing memory pointers.
- */
-ZSTDLIB_API size_t ZSTD_compress_generic_simpleArgs (
- ZSTD_CCtx* cctx,
- void* dst, size_t dstCapacity, size_t* dstPos,
- const void* src, size_t srcSize, size_t* srcPos,
- ZSTD_EndDirective endOp);
-
-
-/*! ZSTD_CCtx_params :
- * Quick howto :
- * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
- * - ZSTD_CCtxParam_setParameter() : Push parameters one by one into
- * an existing ZSTD_CCtx_params structure.
- * This is similar to
- * ZSTD_CCtx_setParameter().
- * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
- * an existing CCtx.
- * These parameters will be applied to
- * all subsequent compression jobs.
- * - ZSTD_compress_generic() : Do compression using the CCtx.
- * - ZSTD_freeCCtxParams() : Free the memory.
- *
- * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
- * for static allocation for single-threaded compression.
- */
-ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
-ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);
-
-
-/*! ZSTD_CCtxParams_reset() :
- * Reset params to default values.
- */
-ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params);
-
-/*! ZSTD_CCtxParams_init() :
- * Initializes the compression parameters of cctxParams according to
- * compression level. All other parameters are reset to their default values.
- */
-ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel);
-
-/*! ZSTD_CCtxParams_init_advanced() :
- * Initializes the compression and frame parameters of cctxParams according to
- * params. All other parameters are reset to their default values.
- */
-ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
-
-
-/*! ZSTD_CCtxParam_setParameter() :
- * Similar to ZSTD_CCtx_setParameter.
- * Set one compression parameter, selected by enum ZSTD_cParameter.
- * Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
- * Note : when `value` is an enum, cast it to unsigned for proper type checking.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- */
-ZSTDLIB_API size_t ZSTD_CCtxParam_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, unsigned value);
-
-/*! ZSTD_CCtx_setParametersUsingCCtxParams() :
- * Apply a set of ZSTD_CCtx_params to the compression context.
- * This can be done even after compression is started,
- * if nbWorkers==0, this will have no impact until a new compression is started.
- * if nbWorkers>=1, new parameters will be picked up at next job,
- * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated).
- */
-ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams(
- ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
-
-
-/*=== Advanced parameters for decompression API ===*/
-
-/* The following parameters must be set after creating a ZSTD_DCtx* (or ZSTD_DStream*) object,
- * but before starting decompression of a frame.
- */
-
-/*! ZSTD_DCtx_loadDictionary() :
- * Create an internal DDict from dict buffer,
- * to be used to decompress next frames.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
- * meaning "return to no-dictionary mode".
- * Note 1 : `dict` content will be copied internally.
- * Use ZSTD_DCtx_loadDictionary_byReference()
- * to reference dictionary content instead.
- * In which case, the dictionary buffer must outlive its users.
- * Note 2 : Loading a dictionary involves building tables,
- * which has a non-negligible impact on CPU usage and latency.
- * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to select
- * how dictionary content will be interpreted and loaded.
- */
-ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
-ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
-ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
-
-
-/*! ZSTD_DCtx_refDDict() :
- * Reference a prepared dictionary, to be used to decompress next frames.
- * The dictionary remains active for decompression of future frames using same DCtx.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Note 1 : Currently, only one dictionary can be managed.
- * Referencing a new dictionary effectively "discards" any previous one.
- * Special : adding a NULL DDict means "return to no-dictionary mode".
- * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
- */
-ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
-
-
-/*! ZSTD_DCtx_refPrefix() :
- * Reference a prefix (single-usage dictionary) for next compression job.
- * Prefix is **only used once**. It must be explicitly referenced before each frame.
- * If there is a need to use same prefix multiple times, consider embedding it into a ZSTD_DDict instead.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
- * Note 2 : Prefix buffer is referenced. It must outlive compression job.
- * Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent).
- * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode.
- * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost.
- */
-ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize);
-ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
-
-
-/*! ZSTD_DCtx_setMaxWindowSize() :
- * Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
- * This is useful to prevent a decoder context from reserving too much memory for itself (potential attack scenario).
- * This parameter is only useful in streaming mode, since no internal buffer is allocated in direct mode.
- * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_MAX)
- * @return : 0, or an error code (which can be tested using ZSTD_isError()).
- */
-ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
-
-
-/*! ZSTD_DCtx_setFormat() :
- * Instruct the decoder context about what kind of data to decode next.
- * This instruction is mandatory to decode data without a fully-formed header,
- * such ZSTD_f_zstd1_magicless for example.
- * @return : 0, or an error code (which can be tested using ZSTD_isError()).
- */
-ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
-
-
-/*! ZSTD_decompress_generic() :
- * Behave the same as ZSTD_decompressStream.
- * Decompression parameters cannot be changed once decompression is started.
- * @return : an error code, which can be tested using ZSTD_isError()
- * if >0, a hint, nb of expected input bytes for next invocation.
- * `0` means : a frame has just been fully decoded and flushed.
- */
-ZSTDLIB_API size_t ZSTD_decompress_generic(ZSTD_DCtx* dctx,
- ZSTD_outBuffer* output,
- ZSTD_inBuffer* input);
-
-
-/*! ZSTD_decompress_generic_simpleArgs() :
- * Same as ZSTD_decompress_generic(),
- * but using only integral types as arguments.
- * Argument list is larger than ZSTD_{in,out}Buffer,
- * but can be helpful for binders from dynamic languages
- * which have troubles handling structures containing memory pointers.
- */
-ZSTDLIB_API size_t ZSTD_decompress_generic_simpleArgs (
- ZSTD_DCtx* dctx,
- void* dst, size_t dstCapacity, size_t* dstPos,
- const void* src, size_t srcSize, size_t* srcPos);
-
-
-/*! ZSTD_DCtx_reset() :
- * Return a DCtx to clean state.
- * If a decompression was ongoing, any internal data not yet flushed is cancelled.
- * All parameters are back to default values, including sticky ones.
- * Dictionary (if any) is dropped.
- * Parameters can be modified again after a reset.
- */
-ZSTDLIB_API void ZSTD_DCtx_reset(ZSTD_DCtx* dctx);
-
-
/* ============================ */
/** Block level API */
@@ -1372,10 +1920,10 @@
+ copyCCtx() and copyDCtx() can be used too
- Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB
+ If input is larger than a block size, it's necessary to split input data into multiple blocks
- + For inputs larger than a single block size, consider using the regular ZSTD_compress() instead.
+ + For inputs larger than a single block, really consider using regular ZSTD_compress() instead.
Frame metadata is not that costly, and quickly becomes negligible as source size grows larger.
- When a block is considered not compressible enough, ZSTD_compressBlock() result will be zero.
- In which case, nothing is produced into `dst`.
+ In which case, nothing is produced into `dst` !
+ User must test for such outcome and deal directly with uncompressed data
+ ZSTD_decompressBlock() doesn't accept uncompressed data as input !!!
+ In case of multiple successive blocks, should some of them be uncompressed,
@@ -1383,8 +1931,6 @@
Use ZSTD_insertBlock() for such a case.
*/
-#define ZSTD_BLOCKSIZELOG_MAX 17
-#define ZSTD_BLOCKSIZE_MAX (1<<ZSTD_BLOCKSIZELOG_MAX) /* define, for static allocation */
/*===== Raw zstd block functions =====*/
ZSTDLIB_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx);
ZSTDLIB_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);