diff --git a/vendor/go.etcd.io/etcd/raft/confchange/confchange.go b/vendor/go.etcd.io/etcd/raft/confchange/confchange.go
new file mode 100644
index 0000000..a0dc486
--- /dev/null
+++ b/vendor/go.etcd.io/etcd/raft/confchange/confchange.go
@@ -0,0 +1,425 @@
+// Copyright 2019 The etcd Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package confchange
+
+import (
+	"errors"
+	"fmt"
+	"strings"
+
+	"go.etcd.io/etcd/raft/quorum"
+	pb "go.etcd.io/etcd/raft/raftpb"
+	"go.etcd.io/etcd/raft/tracker"
+)
+
+// Changer facilitates configuration changes. It exposes methods to handle
+// simple and joint consensus while performing the proper validation that allows
+// refusing invalid configuration changes before they affect the active
+// configuration.
+type Changer struct {
+	Tracker   tracker.ProgressTracker
+	LastIndex uint64
+}
+
+// EnterJoint verifies that the outgoing (=right) majority config of the joint
+// config is empty and initializes it with a copy of the incoming (=left)
+// majority config. That is, it transitions from
+//
+//     (1 2 3)&&()
+// to
+//     (1 2 3)&&(1 2 3).
+//
+// The supplied changes are then applied to the incoming majority config,
+// resulting in a joint configuration that in terms of the Raft thesis[1]
+// (Section 4.3) corresponds to `C_{new,old}`.
+//
+// [1]: https://github.com/ongardie/dissertation/blob/master/online-trim.pdf
+func (c Changer) EnterJoint(autoLeave bool, ccs ...pb.ConfChangeSingle) (tracker.Config, tracker.ProgressMap, error) {
+	cfg, prs, err := c.checkAndCopy()
+	if err != nil {
+		return c.err(err)
+	}
+	if joint(cfg) {
+		err := errors.New("config is already joint")
+		return c.err(err)
+	}
+	if len(incoming(cfg.Voters)) == 0 {
+		// We allow adding nodes to an empty config for convenience (testing and
+		// bootstrap), but you can't enter a joint state.
+		err := errors.New("can't make a zero-voter config joint")
+		return c.err(err)
+	}
+	// Clear the outgoing config.
+	*outgoingPtr(&cfg.Voters) = quorum.MajorityConfig{}
+	// Copy incoming to outgoing.
+	for id := range incoming(cfg.Voters) {
+		outgoing(cfg.Voters)[id] = struct{}{}
+	}
+
+	if err := c.apply(&cfg, prs, ccs...); err != nil {
+		return c.err(err)
+	}
+	cfg.AutoLeave = autoLeave
+	return checkAndReturn(cfg, prs)
+}
+
+// LeaveJoint transitions out of a joint configuration. It is an error to call
+// this method if the configuration is not joint, i.e. if the outgoing majority
+// config Voters[1] is empty.
+//
+// The outgoing majority config of the joint configuration will be removed,
+// that is, the incoming config is promoted as the sole decision maker. In the
+// notation of the Raft thesis[1] (Section 4.3), this method transitions from
+// `C_{new,old}` into `C_new`.
+//
+// At the same time, any staged learners (LearnersNext) the addition of which
+// was held back by an overlapping voter in the former outgoing config will be
+// inserted into Learners.
+//
+// [1]: https://github.com/ongardie/dissertation/blob/master/online-trim.pdf
+func (c Changer) LeaveJoint() (tracker.Config, tracker.ProgressMap, error) {
+	cfg, prs, err := c.checkAndCopy()
+	if err != nil {
+		return c.err(err)
+	}
+	if !joint(cfg) {
+		err := errors.New("can't leave a non-joint config")
+		return c.err(err)
+	}
+	if len(outgoing(cfg.Voters)) == 0 {
+		err := fmt.Errorf("configuration is not joint: %v", cfg)
+		return c.err(err)
+	}
+	for id := range cfg.LearnersNext {
+		nilAwareAdd(&cfg.Learners, id)
+		prs[id].IsLearner = true
+	}
+	cfg.LearnersNext = nil
+
+	for id := range outgoing(cfg.Voters) {
+		_, isVoter := incoming(cfg.Voters)[id]
+		_, isLearner := cfg.Learners[id]
+
+		if !isVoter && !isLearner {
+			delete(prs, id)
+		}
+	}
+	*outgoingPtr(&cfg.Voters) = nil
+	cfg.AutoLeave = false
+
+	return checkAndReturn(cfg, prs)
+}
+
+// Simple carries out a series of configuration changes that (in aggregate)
+// mutates the incoming majority config Voters[0] by at most one. This method
+// will return an error if that is not the case, if the resulting quorum is
+// zero, or if the configuration is in a joint state (i.e. if there is an
+// outgoing configuration).
+func (c Changer) Simple(ccs ...pb.ConfChangeSingle) (tracker.Config, tracker.ProgressMap, error) {
+	cfg, prs, err := c.checkAndCopy()
+	if err != nil {
+		return c.err(err)
+	}
+	if joint(cfg) {
+		err := errors.New("can't apply simple config change in joint config")
+		return c.err(err)
+	}
+	if err := c.apply(&cfg, prs, ccs...); err != nil {
+		return c.err(err)
+	}
+	if n := symdiff(incoming(c.Tracker.Voters), incoming(cfg.Voters)); n > 1 {
+		return tracker.Config{}, nil, errors.New("more than one voter changed without entering joint config")
+	}
+	if err := checkInvariants(cfg, prs); err != nil {
+		return tracker.Config{}, tracker.ProgressMap{}, nil
+	}
+
+	return checkAndReturn(cfg, prs)
+}
+
+// apply a change to the configuration. By convention, changes to voters are
+// always made to the incoming majority config Voters[0]. Voters[1] is either
+// empty or preserves the outgoing majority configuration while in a joint state.
+func (c Changer) apply(cfg *tracker.Config, prs tracker.ProgressMap, ccs ...pb.ConfChangeSingle) error {
+	for _, cc := range ccs {
+		if cc.NodeID == 0 {
+			// etcd replaces the NodeID with zero if it decides (downstream of
+			// raft) to not apply a change, so we have to have explicit code
+			// here to ignore these.
+			continue
+		}
+		switch cc.Type {
+		case pb.ConfChangeAddNode:
+			c.makeVoter(cfg, prs, cc.NodeID)
+		case pb.ConfChangeAddLearnerNode:
+			c.makeLearner(cfg, prs, cc.NodeID)
+		case pb.ConfChangeRemoveNode:
+			c.remove(cfg, prs, cc.NodeID)
+		case pb.ConfChangeUpdateNode:
+		default:
+			return fmt.Errorf("unexpected conf type %d", cc.Type)
+		}
+	}
+	if len(incoming(cfg.Voters)) == 0 {
+		return errors.New("removed all voters")
+	}
+	return nil
+}
+
+// makeVoter adds or promotes the given ID to be a voter in the incoming
+// majority config.
+func (c Changer) makeVoter(cfg *tracker.Config, prs tracker.ProgressMap, id uint64) {
+	pr := prs[id]
+	if pr == nil {
+		c.initProgress(cfg, prs, id, false /* isLearner */)
+		return
+	}
+
+	pr.IsLearner = false
+	nilAwareDelete(&cfg.Learners, id)
+	nilAwareDelete(&cfg.LearnersNext, id)
+	incoming(cfg.Voters)[id] = struct{}{}
+	return
+}
+
+// makeLearner makes the given ID a learner or stages it to be a learner once
+// an active joint configuration is exited.
+//
+// The former happens when the peer is not a part of the outgoing config, in
+// which case we either add a new learner or demote a voter in the incoming
+// config.
+//
+// The latter case occurs when the configuration is joint and the peer is a
+// voter in the outgoing config. In that case, we do not want to add the peer
+// as a learner because then we'd have to track a peer as a voter and learner
+// simultaneously. Instead, we add the learner to LearnersNext, so that it will
+// be added to Learners the moment the outgoing config is removed by
+// LeaveJoint().
+func (c Changer) makeLearner(cfg *tracker.Config, prs tracker.ProgressMap, id uint64) {
+	pr := prs[id]
+	if pr == nil {
+		c.initProgress(cfg, prs, id, true /* isLearner */)
+		return
+	}
+	if pr.IsLearner {
+		return
+	}
+	// Remove any existing voter in the incoming config...
+	c.remove(cfg, prs, id)
+	// ... but save the Progress.
+	prs[id] = pr
+	// Use LearnersNext if we can't add the learner to Learners directly, i.e.
+	// if the peer is still tracked as a voter in the outgoing config. It will
+	// be turned into a learner in LeaveJoint().
+	//
+	// Otherwise, add a regular learner right away.
+	if _, onRight := outgoing(cfg.Voters)[id]; onRight {
+		nilAwareAdd(&cfg.LearnersNext, id)
+	} else {
+		pr.IsLearner = true
+		nilAwareAdd(&cfg.Learners, id)
+	}
+}
+
+// remove this peer as a voter or learner from the incoming config.
+func (c Changer) remove(cfg *tracker.Config, prs tracker.ProgressMap, id uint64) {
+	if _, ok := prs[id]; !ok {
+		return
+	}
+
+	delete(incoming(cfg.Voters), id)
+	nilAwareDelete(&cfg.Learners, id)
+	nilAwareDelete(&cfg.LearnersNext, id)
+
+	// If the peer is still a voter in the outgoing config, keep the Progress.
+	if _, onRight := outgoing(cfg.Voters)[id]; !onRight {
+		delete(prs, id)
+	}
+}
+
+// initProgress initializes a new progress for the given node or learner.
+func (c Changer) initProgress(cfg *tracker.Config, prs tracker.ProgressMap, id uint64, isLearner bool) {
+	if !isLearner {
+		incoming(cfg.Voters)[id] = struct{}{}
+	} else {
+		nilAwareAdd(&cfg.Learners, id)
+	}
+	prs[id] = &tracker.Progress{
+		// Initializing the Progress with the last index means that the follower
+		// can be probed (with the last index).
+		//
+		// TODO(tbg): seems awfully optimistic. Using the first index would be
+		// better. The general expectation here is that the follower has no log
+		// at all (and will thus likely need a snapshot), though the app may
+		// have applied a snapshot out of band before adding the replica (thus
+		// making the first index the better choice).
+		Next:      c.LastIndex,
+		Match:     0,
+		Inflights: tracker.NewInflights(c.Tracker.MaxInflight),
+		IsLearner: isLearner,
+		// When a node is first added, we should mark it as recently active.
+		// Otherwise, CheckQuorum may cause us to step down if it is invoked
+		// before the added node has had a chance to communicate with us.
+		RecentActive: true,
+	}
+}
+
+// checkInvariants makes sure that the config and progress are compatible with
+// each other. This is used to check both what the Changer is initialized with,
+// as well as what it returns.
+func checkInvariants(cfg tracker.Config, prs tracker.ProgressMap) error {
+	// NB: intentionally allow the empty config. In production we'll never see a
+	// non-empty config (we prevent it from being created) but we will need to
+	// be able to *create* an initial config, for example during bootstrap (or
+	// during tests). Instead of having to hand-code this, we allow
+	// transitioning from an empty config into any other legal and non-empty
+	// config.
+	for _, ids := range []map[uint64]struct{}{
+		cfg.Voters.IDs(),
+		cfg.Learners,
+		cfg.LearnersNext,
+	} {
+		for id := range ids {
+			if _, ok := prs[id]; !ok {
+				return fmt.Errorf("no progress for %d", id)
+			}
+		}
+	}
+
+	// Any staged learner was staged because it could not be directly added due
+	// to a conflicting voter in the outgoing config.
+	for id := range cfg.LearnersNext {
+		if _, ok := outgoing(cfg.Voters)[id]; !ok {
+			return fmt.Errorf("%d is in LearnersNext, but not Voters[1]", id)
+		}
+		if prs[id].IsLearner {
+			return fmt.Errorf("%d is in LearnersNext, but is already marked as learner", id)
+		}
+	}
+	// Conversely Learners and Voters doesn't intersect at all.
+	for id := range cfg.Learners {
+		if _, ok := outgoing(cfg.Voters)[id]; ok {
+			return fmt.Errorf("%d is in Learners and Voters[1]", id)
+		}
+		if _, ok := incoming(cfg.Voters)[id]; ok {
+			return fmt.Errorf("%d is in Learners and Voters[0]", id)
+		}
+		if !prs[id].IsLearner {
+			return fmt.Errorf("%d is in Learners, but is not marked as learner", id)
+		}
+	}
+
+	if !joint(cfg) {
+		// We enforce that empty maps are nil instead of zero.
+		if outgoing(cfg.Voters) != nil {
+			return fmt.Errorf("Voters[1] must be nil when not joint")
+		}
+		if cfg.LearnersNext != nil {
+			return fmt.Errorf("LearnersNext must be nil when not joint")
+		}
+		if cfg.AutoLeave {
+			return fmt.Errorf("AutoLeave must be false when not joint")
+		}
+	}
+
+	return nil
+}
+
+// checkAndCopy copies the tracker's config and progress map (deeply enough for
+// the purposes of the Changer) and returns those copies. It returns an error
+// if checkInvariants does.
+func (c Changer) checkAndCopy() (tracker.Config, tracker.ProgressMap, error) {
+	cfg := c.Tracker.Config.Clone()
+	prs := tracker.ProgressMap{}
+
+	for id, pr := range c.Tracker.Progress {
+		// A shallow copy is enough because we only mutate the Learner field.
+		ppr := *pr
+		prs[id] = &ppr
+	}
+	return checkAndReturn(cfg, prs)
+}
+
+// checkAndReturn calls checkInvariants on the input and returns either the
+// resulting error or the input.
+func checkAndReturn(cfg tracker.Config, prs tracker.ProgressMap) (tracker.Config, tracker.ProgressMap, error) {
+	if err := checkInvariants(cfg, prs); err != nil {
+		return tracker.Config{}, tracker.ProgressMap{}, err
+	}
+	return cfg, prs, nil
+}
+
+// err returns zero values and an error.
+func (c Changer) err(err error) (tracker.Config, tracker.ProgressMap, error) {
+	return tracker.Config{}, nil, err
+}
+
+// nilAwareAdd populates a map entry, creating the map if necessary.
+func nilAwareAdd(m *map[uint64]struct{}, id uint64) {
+	if *m == nil {
+		*m = map[uint64]struct{}{}
+	}
+	(*m)[id] = struct{}{}
+}
+
+// nilAwareDelete deletes from a map, nil'ing the map itself if it is empty after.
+func nilAwareDelete(m *map[uint64]struct{}, id uint64) {
+	if *m == nil {
+		return
+	}
+	delete(*m, id)
+	if len(*m) == 0 {
+		*m = nil
+	}
+}
+
+// symdiff returns the count of the symmetric difference between the sets of
+// uint64s, i.e. len( (l - r) \union (r - l)).
+func symdiff(l, r map[uint64]struct{}) int {
+	var n int
+	pairs := [][2]quorum.MajorityConfig{
+		{l, r}, // count elems in l but not in r
+		{r, l}, // count elems in r but not in l
+	}
+	for _, p := range pairs {
+		for id := range p[0] {
+			if _, ok := p[1][id]; !ok {
+				n++
+			}
+		}
+	}
+	return n
+}
+
+func joint(cfg tracker.Config) bool {
+	return len(outgoing(cfg.Voters)) > 0
+}
+
+func incoming(voters quorum.JointConfig) quorum.MajorityConfig      { return voters[0] }
+func outgoing(voters quorum.JointConfig) quorum.MajorityConfig      { return voters[1] }
+func outgoingPtr(voters *quorum.JointConfig) *quorum.MajorityConfig { return &voters[1] }
+
+// Describe prints the type and NodeID of the configuration changes as a
+// space-delimited string.
+func Describe(ccs ...pb.ConfChangeSingle) string {
+	var buf strings.Builder
+	for _, cc := range ccs {
+		if buf.Len() > 0 {
+			buf.WriteByte(' ')
+		}
+		fmt.Fprintf(&buf, "%s(%d)", cc.Type, cc.NodeID)
+	}
+	return buf.String()
+}