diff --git a/vendor/github.com/prometheus/client_golang/prometheus/promhttp/http.go b/vendor/github.com/prometheus/client_golang/prometheus/promhttp/http.go
new file mode 100644
index 0000000..cea5a90
--- /dev/null
+++ b/vendor/github.com/prometheus/client_golang/prometheus/promhttp/http.go
@@ -0,0 +1,349 @@
+// Copyright 2016 The Prometheus Authors
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// Package promhttp provides tooling around HTTP servers and clients.
+//
+// First, the package allows the creation of http.Handler instances to expose
+// Prometheus metrics via HTTP. promhttp.Handler acts on the
+// prometheus.DefaultGatherer. With HandlerFor, you can create a handler for a
+// custom registry or anything that implements the Gatherer interface. It also
+// allows the creation of handlers that act differently on errors or allow to
+// log errors.
+//
+// Second, the package provides tooling to instrument instances of http.Handler
+// via middleware. Middleware wrappers follow the naming scheme
+// InstrumentHandlerX, where X describes the intended use of the middleware.
+// See each function's doc comment for specific details.
+//
+// Finally, the package allows for an http.RoundTripper to be instrumented via
+// middleware. Middleware wrappers follow the naming scheme
+// InstrumentRoundTripperX, where X describes the intended use of the
+// middleware. See each function's doc comment for specific details.
+package promhttp
+
+import (
+	"compress/gzip"
+	"fmt"
+	"io"
+	"net/http"
+	"strings"
+	"sync"
+	"time"
+
+	"github.com/prometheus/common/expfmt"
+
+	"github.com/prometheus/client_golang/prometheus"
+)
+
+const (
+	contentTypeHeader     = "Content-Type"
+	contentEncodingHeader = "Content-Encoding"
+	acceptEncodingHeader  = "Accept-Encoding"
+)
+
+var gzipPool = sync.Pool{
+	New: func() interface{} {
+		return gzip.NewWriter(nil)
+	},
+}
+
+// Handler returns an http.Handler for the prometheus.DefaultGatherer, using
+// default HandlerOpts, i.e. it reports the first error as an HTTP error, it has
+// no error logging, and it applies compression if requested by the client.
+//
+// The returned http.Handler is already instrumented using the
+// InstrumentMetricHandler function and the prometheus.DefaultRegisterer. If you
+// create multiple http.Handlers by separate calls of the Handler function, the
+// metrics used for instrumentation will be shared between them, providing
+// global scrape counts.
+//
+// This function is meant to cover the bulk of basic use cases. If you are doing
+// anything that requires more customization (including using a non-default
+// Gatherer, different instrumentation, and non-default HandlerOpts), use the
+// HandlerFor function. See there for details.
+func Handler() http.Handler {
+	return InstrumentMetricHandler(
+		prometheus.DefaultRegisterer, HandlerFor(prometheus.DefaultGatherer, HandlerOpts{}),
+	)
+}
+
+// HandlerFor returns an uninstrumented http.Handler for the provided
+// Gatherer. The behavior of the Handler is defined by the provided
+// HandlerOpts. Thus, HandlerFor is useful to create http.Handlers for custom
+// Gatherers, with non-default HandlerOpts, and/or with custom (or no)
+// instrumentation. Use the InstrumentMetricHandler function to apply the same
+// kind of instrumentation as it is used by the Handler function.
+func HandlerFor(reg prometheus.Gatherer, opts HandlerOpts) http.Handler {
+	var (
+		inFlightSem chan struct{}
+		errCnt      = prometheus.NewCounterVec(
+			prometheus.CounterOpts{
+				Name: "promhttp_metric_handler_errors_total",
+				Help: "Total number of internal errors encountered by the promhttp metric handler.",
+			},
+			[]string{"cause"},
+		)
+	)
+
+	if opts.MaxRequestsInFlight > 0 {
+		inFlightSem = make(chan struct{}, opts.MaxRequestsInFlight)
+	}
+	if opts.Registry != nil {
+		// Initialize all possibilites that can occur below.
+		errCnt.WithLabelValues("gathering")
+		errCnt.WithLabelValues("encoding")
+		if err := opts.Registry.Register(errCnt); err != nil {
+			if are, ok := err.(prometheus.AlreadyRegisteredError); ok {
+				errCnt = are.ExistingCollector.(*prometheus.CounterVec)
+			} else {
+				panic(err)
+			}
+		}
+	}
+
+	h := http.HandlerFunc(func(rsp http.ResponseWriter, req *http.Request) {
+		if inFlightSem != nil {
+			select {
+			case inFlightSem <- struct{}{}: // All good, carry on.
+				defer func() { <-inFlightSem }()
+			default:
+				http.Error(rsp, fmt.Sprintf(
+					"Limit of concurrent requests reached (%d), try again later.", opts.MaxRequestsInFlight,
+				), http.StatusServiceUnavailable)
+				return
+			}
+		}
+		mfs, err := reg.Gather()
+		if err != nil {
+			if opts.ErrorLog != nil {
+				opts.ErrorLog.Println("error gathering metrics:", err)
+			}
+			errCnt.WithLabelValues("gathering").Inc()
+			switch opts.ErrorHandling {
+			case PanicOnError:
+				panic(err)
+			case ContinueOnError:
+				if len(mfs) == 0 {
+					// Still report the error if no metrics have been gathered.
+					httpError(rsp, err)
+					return
+				}
+			case HTTPErrorOnError:
+				httpError(rsp, err)
+				return
+			}
+		}
+
+		contentType := expfmt.Negotiate(req.Header)
+		header := rsp.Header()
+		header.Set(contentTypeHeader, string(contentType))
+
+		w := io.Writer(rsp)
+		if !opts.DisableCompression && gzipAccepted(req.Header) {
+			header.Set(contentEncodingHeader, "gzip")
+			gz := gzipPool.Get().(*gzip.Writer)
+			defer gzipPool.Put(gz)
+
+			gz.Reset(w)
+			defer gz.Close()
+
+			w = gz
+		}
+
+		enc := expfmt.NewEncoder(w, contentType)
+
+		var lastErr error
+		for _, mf := range mfs {
+			if err := enc.Encode(mf); err != nil {
+				lastErr = err
+				if opts.ErrorLog != nil {
+					opts.ErrorLog.Println("error encoding and sending metric family:", err)
+				}
+				errCnt.WithLabelValues("encoding").Inc()
+				switch opts.ErrorHandling {
+				case PanicOnError:
+					panic(err)
+				case ContinueOnError:
+					// Handled later.
+				case HTTPErrorOnError:
+					httpError(rsp, err)
+					return
+				}
+			}
+		}
+
+		if lastErr != nil {
+			httpError(rsp, lastErr)
+		}
+	})
+
+	if opts.Timeout <= 0 {
+		return h
+	}
+	return http.TimeoutHandler(h, opts.Timeout, fmt.Sprintf(
+		"Exceeded configured timeout of %v.\n",
+		opts.Timeout,
+	))
+}
+
+// InstrumentMetricHandler is usually used with an http.Handler returned by the
+// HandlerFor function. It instruments the provided http.Handler with two
+// metrics: A counter vector "promhttp_metric_handler_requests_total" to count
+// scrapes partitioned by HTTP status code, and a gauge
+// "promhttp_metric_handler_requests_in_flight" to track the number of
+// simultaneous scrapes. This function idempotently registers collectors for
+// both metrics with the provided Registerer. It panics if the registration
+// fails. The provided metrics are useful to see how many scrapes hit the
+// monitored target (which could be from different Prometheus servers or other
+// scrapers), and how often they overlap (which would result in more than one
+// scrape in flight at the same time). Note that the scrapes-in-flight gauge
+// will contain the scrape by which it is exposed, while the scrape counter will
+// only get incremented after the scrape is complete (as only then the status
+// code is known). For tracking scrape durations, use the
+// "scrape_duration_seconds" gauge created by the Prometheus server upon each
+// scrape.
+func InstrumentMetricHandler(reg prometheus.Registerer, handler http.Handler) http.Handler {
+	cnt := prometheus.NewCounterVec(
+		prometheus.CounterOpts{
+			Name: "promhttp_metric_handler_requests_total",
+			Help: "Total number of scrapes by HTTP status code.",
+		},
+		[]string{"code"},
+	)
+	// Initialize the most likely HTTP status codes.
+	cnt.WithLabelValues("200")
+	cnt.WithLabelValues("500")
+	cnt.WithLabelValues("503")
+	if err := reg.Register(cnt); err != nil {
+		if are, ok := err.(prometheus.AlreadyRegisteredError); ok {
+			cnt = are.ExistingCollector.(*prometheus.CounterVec)
+		} else {
+			panic(err)
+		}
+	}
+
+	gge := prometheus.NewGauge(prometheus.GaugeOpts{
+		Name: "promhttp_metric_handler_requests_in_flight",
+		Help: "Current number of scrapes being served.",
+	})
+	if err := reg.Register(gge); err != nil {
+		if are, ok := err.(prometheus.AlreadyRegisteredError); ok {
+			gge = are.ExistingCollector.(prometheus.Gauge)
+		} else {
+			panic(err)
+		}
+	}
+
+	return InstrumentHandlerCounter(cnt, InstrumentHandlerInFlight(gge, handler))
+}
+
+// HandlerErrorHandling defines how a Handler serving metrics will handle
+// errors.
+type HandlerErrorHandling int
+
+// These constants cause handlers serving metrics to behave as described if
+// errors are encountered.
+const (
+	// Serve an HTTP status code 500 upon the first error
+	// encountered. Report the error message in the body.
+	HTTPErrorOnError HandlerErrorHandling = iota
+	// Ignore errors and try to serve as many metrics as possible.  However,
+	// if no metrics can be served, serve an HTTP status code 500 and the
+	// last error message in the body. Only use this in deliberate "best
+	// effort" metrics collection scenarios. In this case, it is highly
+	// recommended to provide other means of detecting errors: By setting an
+	// ErrorLog in HandlerOpts, the errors are logged. By providing a
+	// Registry in HandlerOpts, the exposed metrics include an error counter
+	// "promhttp_metric_handler_errors_total", which can be used for
+	// alerts.
+	ContinueOnError
+	// Panic upon the first error encountered (useful for "crash only" apps).
+	PanicOnError
+)
+
+// Logger is the minimal interface HandlerOpts needs for logging. Note that
+// log.Logger from the standard library implements this interface, and it is
+// easy to implement by custom loggers, if they don't do so already anyway.
+type Logger interface {
+	Println(v ...interface{})
+}
+
+// HandlerOpts specifies options how to serve metrics via an http.Handler. The
+// zero value of HandlerOpts is a reasonable default.
+type HandlerOpts struct {
+	// ErrorLog specifies an optional logger for errors collecting and
+	// serving metrics. If nil, errors are not logged at all.
+	ErrorLog Logger
+	// ErrorHandling defines how errors are handled. Note that errors are
+	// logged regardless of the configured ErrorHandling provided ErrorLog
+	// is not nil.
+	ErrorHandling HandlerErrorHandling
+	// If Registry is not nil, it is used to register a metric
+	// "promhttp_metric_handler_errors_total", partitioned by "cause". A
+	// failed registration causes a panic. Note that this error counter is
+	// different from the instrumentation you get from the various
+	// InstrumentHandler... helpers. It counts errors that don't necessarily
+	// result in a non-2xx HTTP status code. There are two typical cases:
+	// (1) Encoding errors that only happen after streaming of the HTTP body
+	// has already started (and the status code 200 has been sent). This
+	// should only happen with custom collectors. (2) Collection errors with
+	// no effect on the HTTP status code because ErrorHandling is set to
+	// ContinueOnError.
+	Registry prometheus.Registerer
+	// If DisableCompression is true, the handler will never compress the
+	// response, even if requested by the client.
+	DisableCompression bool
+	// The number of concurrent HTTP requests is limited to
+	// MaxRequestsInFlight. Additional requests are responded to with 503
+	// Service Unavailable and a suitable message in the body. If
+	// MaxRequestsInFlight is 0 or negative, no limit is applied.
+	MaxRequestsInFlight int
+	// If handling a request takes longer than Timeout, it is responded to
+	// with 503 ServiceUnavailable and a suitable Message. No timeout is
+	// applied if Timeout is 0 or negative. Note that with the current
+	// implementation, reaching the timeout simply ends the HTTP requests as
+	// described above (and even that only if sending of the body hasn't
+	// started yet), while the bulk work of gathering all the metrics keeps
+	// running in the background (with the eventual result to be thrown
+	// away). Until the implementation is improved, it is recommended to
+	// implement a separate timeout in potentially slow Collectors.
+	Timeout time.Duration
+}
+
+// gzipAccepted returns whether the client will accept gzip-encoded content.
+func gzipAccepted(header http.Header) bool {
+	a := header.Get(acceptEncodingHeader)
+	parts := strings.Split(a, ",")
+	for _, part := range parts {
+		part = strings.TrimSpace(part)
+		if part == "gzip" || strings.HasPrefix(part, "gzip;") {
+			return true
+		}
+	}
+	return false
+}
+
+// httpError removes any content-encoding header and then calls http.Error with
+// the provided error and http.StatusInternalServerErrer. Error contents is
+// supposed to be uncompressed plain text. However, same as with a plain
+// http.Error, any header settings will be void if the header has already been
+// sent. The error message will still be written to the writer, but it will
+// probably be of limited use.
+func httpError(rsp http.ResponseWriter, err error) {
+	rsp.Header().Del(contentEncodingHeader)
+	http.Error(
+		rsp,
+		"An error has occurred while serving metrics:\n\n"+err.Error(),
+		http.StatusInternalServerError,
+	)
+}