diff --git a/vendor/golang.org/x/crypto/bcrypt/base64.go b/vendor/golang.org/x/crypto/bcrypt/base64.go
new file mode 100644
index 0000000..fc31160
--- /dev/null
+++ b/vendor/golang.org/x/crypto/bcrypt/base64.go
@@ -0,0 +1,35 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package bcrypt
+
+import "encoding/base64"
+
+const alphabet = "./ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"
+
+var bcEncoding = base64.NewEncoding(alphabet)
+
+func base64Encode(src []byte) []byte {
+	n := bcEncoding.EncodedLen(len(src))
+	dst := make([]byte, n)
+	bcEncoding.Encode(dst, src)
+	for dst[n-1] == '=' {
+		n--
+	}
+	return dst[:n]
+}
+
+func base64Decode(src []byte) ([]byte, error) {
+	numOfEquals := 4 - (len(src) % 4)
+	for i := 0; i < numOfEquals; i++ {
+		src = append(src, '=')
+	}
+
+	dst := make([]byte, bcEncoding.DecodedLen(len(src)))
+	n, err := bcEncoding.Decode(dst, src)
+	if err != nil {
+		return nil, err
+	}
+	return dst[:n], nil
+}
diff --git a/vendor/golang.org/x/crypto/bcrypt/bcrypt.go b/vendor/golang.org/x/crypto/bcrypt/bcrypt.go
new file mode 100644
index 0000000..aeb73f8
--- /dev/null
+++ b/vendor/golang.org/x/crypto/bcrypt/bcrypt.go
@@ -0,0 +1,295 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package bcrypt implements Provos and Mazières's bcrypt adaptive hashing
+// algorithm. See http://www.usenix.org/event/usenix99/provos/provos.pdf
+package bcrypt // import "golang.org/x/crypto/bcrypt"
+
+// The code is a port of Provos and Mazières's C implementation.
+import (
+	"crypto/rand"
+	"crypto/subtle"
+	"errors"
+	"fmt"
+	"io"
+	"strconv"
+
+	"golang.org/x/crypto/blowfish"
+)
+
+const (
+	MinCost     int = 4  // the minimum allowable cost as passed in to GenerateFromPassword
+	MaxCost     int = 31 // the maximum allowable cost as passed in to GenerateFromPassword
+	DefaultCost int = 10 // the cost that will actually be set if a cost below MinCost is passed into GenerateFromPassword
+)
+
+// The error returned from CompareHashAndPassword when a password and hash do
+// not match.
+var ErrMismatchedHashAndPassword = errors.New("crypto/bcrypt: hashedPassword is not the hash of the given password")
+
+// The error returned from CompareHashAndPassword when a hash is too short to
+// be a bcrypt hash.
+var ErrHashTooShort = errors.New("crypto/bcrypt: hashedSecret too short to be a bcrypted password")
+
+// The error returned from CompareHashAndPassword when a hash was created with
+// a bcrypt algorithm newer than this implementation.
+type HashVersionTooNewError byte
+
+func (hv HashVersionTooNewError) Error() string {
+	return fmt.Sprintf("crypto/bcrypt: bcrypt algorithm version '%c' requested is newer than current version '%c'", byte(hv), majorVersion)
+}
+
+// The error returned from CompareHashAndPassword when a hash starts with something other than '$'
+type InvalidHashPrefixError byte
+
+func (ih InvalidHashPrefixError) Error() string {
+	return fmt.Sprintf("crypto/bcrypt: bcrypt hashes must start with '$', but hashedSecret started with '%c'", byte(ih))
+}
+
+type InvalidCostError int
+
+func (ic InvalidCostError) Error() string {
+	return fmt.Sprintf("crypto/bcrypt: cost %d is outside allowed range (%d,%d)", int(ic), int(MinCost), int(MaxCost))
+}
+
+const (
+	majorVersion       = '2'
+	minorVersion       = 'a'
+	maxSaltSize        = 16
+	maxCryptedHashSize = 23
+	encodedSaltSize    = 22
+	encodedHashSize    = 31
+	minHashSize        = 59
+)
+
+// magicCipherData is an IV for the 64 Blowfish encryption calls in
+// bcrypt(). It's the string "OrpheanBeholderScryDoubt" in big-endian bytes.
+var magicCipherData = []byte{
+	0x4f, 0x72, 0x70, 0x68,
+	0x65, 0x61, 0x6e, 0x42,
+	0x65, 0x68, 0x6f, 0x6c,
+	0x64, 0x65, 0x72, 0x53,
+	0x63, 0x72, 0x79, 0x44,
+	0x6f, 0x75, 0x62, 0x74,
+}
+
+type hashed struct {
+	hash  []byte
+	salt  []byte
+	cost  int // allowed range is MinCost to MaxCost
+	major byte
+	minor byte
+}
+
+// GenerateFromPassword returns the bcrypt hash of the password at the given
+// cost. If the cost given is less than MinCost, the cost will be set to
+// DefaultCost, instead. Use CompareHashAndPassword, as defined in this package,
+// to compare the returned hashed password with its cleartext version.
+func GenerateFromPassword(password []byte, cost int) ([]byte, error) {
+	p, err := newFromPassword(password, cost)
+	if err != nil {
+		return nil, err
+	}
+	return p.Hash(), nil
+}
+
+// CompareHashAndPassword compares a bcrypt hashed password with its possible
+// plaintext equivalent. Returns nil on success, or an error on failure.
+func CompareHashAndPassword(hashedPassword, password []byte) error {
+	p, err := newFromHash(hashedPassword)
+	if err != nil {
+		return err
+	}
+
+	otherHash, err := bcrypt(password, p.cost, p.salt)
+	if err != nil {
+		return err
+	}
+
+	otherP := &hashed{otherHash, p.salt, p.cost, p.major, p.minor}
+	if subtle.ConstantTimeCompare(p.Hash(), otherP.Hash()) == 1 {
+		return nil
+	}
+
+	return ErrMismatchedHashAndPassword
+}
+
+// Cost returns the hashing cost used to create the given hashed
+// password. When, in the future, the hashing cost of a password system needs
+// to be increased in order to adjust for greater computational power, this
+// function allows one to establish which passwords need to be updated.
+func Cost(hashedPassword []byte) (int, error) {
+	p, err := newFromHash(hashedPassword)
+	if err != nil {
+		return 0, err
+	}
+	return p.cost, nil
+}
+
+func newFromPassword(password []byte, cost int) (*hashed, error) {
+	if cost < MinCost {
+		cost = DefaultCost
+	}
+	p := new(hashed)
+	p.major = majorVersion
+	p.minor = minorVersion
+
+	err := checkCost(cost)
+	if err != nil {
+		return nil, err
+	}
+	p.cost = cost
+
+	unencodedSalt := make([]byte, maxSaltSize)
+	_, err = io.ReadFull(rand.Reader, unencodedSalt)
+	if err != nil {
+		return nil, err
+	}
+
+	p.salt = base64Encode(unencodedSalt)
+	hash, err := bcrypt(password, p.cost, p.salt)
+	if err != nil {
+		return nil, err
+	}
+	p.hash = hash
+	return p, err
+}
+
+func newFromHash(hashedSecret []byte) (*hashed, error) {
+	if len(hashedSecret) < minHashSize {
+		return nil, ErrHashTooShort
+	}
+	p := new(hashed)
+	n, err := p.decodeVersion(hashedSecret)
+	if err != nil {
+		return nil, err
+	}
+	hashedSecret = hashedSecret[n:]
+	n, err = p.decodeCost(hashedSecret)
+	if err != nil {
+		return nil, err
+	}
+	hashedSecret = hashedSecret[n:]
+
+	// The "+2" is here because we'll have to append at most 2 '=' to the salt
+	// when base64 decoding it in expensiveBlowfishSetup().
+	p.salt = make([]byte, encodedSaltSize, encodedSaltSize+2)
+	copy(p.salt, hashedSecret[:encodedSaltSize])
+
+	hashedSecret = hashedSecret[encodedSaltSize:]
+	p.hash = make([]byte, len(hashedSecret))
+	copy(p.hash, hashedSecret)
+
+	return p, nil
+}
+
+func bcrypt(password []byte, cost int, salt []byte) ([]byte, error) {
+	cipherData := make([]byte, len(magicCipherData))
+	copy(cipherData, magicCipherData)
+
+	c, err := expensiveBlowfishSetup(password, uint32(cost), salt)
+	if err != nil {
+		return nil, err
+	}
+
+	for i := 0; i < 24; i += 8 {
+		for j := 0; j < 64; j++ {
+			c.Encrypt(cipherData[i:i+8], cipherData[i:i+8])
+		}
+	}
+
+	// Bug compatibility with C bcrypt implementations. We only encode 23 of
+	// the 24 bytes encrypted.
+	hsh := base64Encode(cipherData[:maxCryptedHashSize])
+	return hsh, nil
+}
+
+func expensiveBlowfishSetup(key []byte, cost uint32, salt []byte) (*blowfish.Cipher, error) {
+	csalt, err := base64Decode(salt)
+	if err != nil {
+		return nil, err
+	}
+
+	// Bug compatibility with C bcrypt implementations. They use the trailing
+	// NULL in the key string during expansion.
+	// We copy the key to prevent changing the underlying array.
+	ckey := append(key[:len(key):len(key)], 0)
+
+	c, err := blowfish.NewSaltedCipher(ckey, csalt)
+	if err != nil {
+		return nil, err
+	}
+
+	var i, rounds uint64
+	rounds = 1 << cost
+	for i = 0; i < rounds; i++ {
+		blowfish.ExpandKey(ckey, c)
+		blowfish.ExpandKey(csalt, c)
+	}
+
+	return c, nil
+}
+
+func (p *hashed) Hash() []byte {
+	arr := make([]byte, 60)
+	arr[0] = '$'
+	arr[1] = p.major
+	n := 2
+	if p.minor != 0 {
+		arr[2] = p.minor
+		n = 3
+	}
+	arr[n] = '$'
+	n++
+	copy(arr[n:], []byte(fmt.Sprintf("%02d", p.cost)))
+	n += 2
+	arr[n] = '$'
+	n++
+	copy(arr[n:], p.salt)
+	n += encodedSaltSize
+	copy(arr[n:], p.hash)
+	n += encodedHashSize
+	return arr[:n]
+}
+
+func (p *hashed) decodeVersion(sbytes []byte) (int, error) {
+	if sbytes[0] != '$' {
+		return -1, InvalidHashPrefixError(sbytes[0])
+	}
+	if sbytes[1] > majorVersion {
+		return -1, HashVersionTooNewError(sbytes[1])
+	}
+	p.major = sbytes[1]
+	n := 3
+	if sbytes[2] != '$' {
+		p.minor = sbytes[2]
+		n++
+	}
+	return n, nil
+}
+
+// sbytes should begin where decodeVersion left off.
+func (p *hashed) decodeCost(sbytes []byte) (int, error) {
+	cost, err := strconv.Atoi(string(sbytes[0:2]))
+	if err != nil {
+		return -1, err
+	}
+	err = checkCost(cost)
+	if err != nil {
+		return -1, err
+	}
+	p.cost = cost
+	return 3, nil
+}
+
+func (p *hashed) String() string {
+	return fmt.Sprintf("&{hash: %#v, salt: %#v, cost: %d, major: %c, minor: %c}", string(p.hash), p.salt, p.cost, p.major, p.minor)
+}
+
+func checkCost(cost int) error {
+	if cost < MinCost || cost > MaxCost {
+		return InvalidCostError(cost)
+	}
+	return nil
+}
diff --git a/vendor/golang.org/x/crypto/blowfish/block.go b/vendor/golang.org/x/crypto/blowfish/block.go
new file mode 100644
index 0000000..9d80f19
--- /dev/null
+++ b/vendor/golang.org/x/crypto/blowfish/block.go
@@ -0,0 +1,159 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package blowfish
+
+// getNextWord returns the next big-endian uint32 value from the byte slice
+// at the given position in a circular manner, updating the position.
+func getNextWord(b []byte, pos *int) uint32 {
+	var w uint32
+	j := *pos
+	for i := 0; i < 4; i++ {
+		w = w<<8 | uint32(b[j])
+		j++
+		if j >= len(b) {
+			j = 0
+		}
+	}
+	*pos = j
+	return w
+}
+
+// ExpandKey performs a key expansion on the given *Cipher. Specifically, it
+// performs the Blowfish algorithm's key schedule which sets up the *Cipher's
+// pi and substitution tables for calls to Encrypt. This is used, primarily,
+// by the bcrypt package to reuse the Blowfish key schedule during its
+// set up. It's unlikely that you need to use this directly.
+func ExpandKey(key []byte, c *Cipher) {
+	j := 0
+	for i := 0; i < 18; i++ {
+		// Using inlined getNextWord for performance.
+		var d uint32
+		for k := 0; k < 4; k++ {
+			d = d<<8 | uint32(key[j])
+			j++
+			if j >= len(key) {
+				j = 0
+			}
+		}
+		c.p[i] ^= d
+	}
+
+	var l, r uint32
+	for i := 0; i < 18; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.p[i], c.p[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s0[i], c.s0[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s1[i], c.s1[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s2[i], c.s2[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s3[i], c.s3[i+1] = l, r
+	}
+}
+
+// This is similar to ExpandKey, but folds the salt during the key
+// schedule. While ExpandKey is essentially expandKeyWithSalt with an all-zero
+// salt passed in, reusing ExpandKey turns out to be a place of inefficiency
+// and specializing it here is useful.
+func expandKeyWithSalt(key []byte, salt []byte, c *Cipher) {
+	j := 0
+	for i := 0; i < 18; i++ {
+		c.p[i] ^= getNextWord(key, &j)
+	}
+
+	j = 0
+	var l, r uint32
+	for i := 0; i < 18; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.p[i], c.p[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s0[i], c.s0[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s1[i], c.s1[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s2[i], c.s2[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s3[i], c.s3[i+1] = l, r
+	}
+}
+
+func encryptBlock(l, r uint32, c *Cipher) (uint32, uint32) {
+	xl, xr := l, r
+	xl ^= c.p[0]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[1]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[2]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[3]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[4]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[5]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[6]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[7]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[8]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[9]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[10]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[11]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[12]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[13]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[14]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[15]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[16]
+	xr ^= c.p[17]
+	return xr, xl
+}
+
+func decryptBlock(l, r uint32, c *Cipher) (uint32, uint32) {
+	xl, xr := l, r
+	xl ^= c.p[17]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[16]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[15]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[14]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[13]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[12]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[11]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[10]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[9]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[8]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[7]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[6]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[5]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[4]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[3]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[2]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[1]
+	xr ^= c.p[0]
+	return xr, xl
+}
diff --git a/vendor/golang.org/x/crypto/blowfish/cipher.go b/vendor/golang.org/x/crypto/blowfish/cipher.go
new file mode 100644
index 0000000..213bf20
--- /dev/null
+++ b/vendor/golang.org/x/crypto/blowfish/cipher.go
@@ -0,0 +1,99 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package blowfish implements Bruce Schneier's Blowfish encryption algorithm.
+//
+// Blowfish is a legacy cipher and its short block size makes it vulnerable to
+// birthday bound attacks (see https://sweet32.info). It should only be used
+// where compatibility with legacy systems, not security, is the goal.
+//
+// Deprecated: any new system should use AES (from crypto/aes, if necessary in
+// an AEAD mode like crypto/cipher.NewGCM) or XChaCha20-Poly1305 (from
+// golang.org/x/crypto/chacha20poly1305).
+package blowfish // import "golang.org/x/crypto/blowfish"
+
+// The code is a port of Bruce Schneier's C implementation.
+// See https://www.schneier.com/blowfish.html.
+
+import "strconv"
+
+// The Blowfish block size in bytes.
+const BlockSize = 8
+
+// A Cipher is an instance of Blowfish encryption using a particular key.
+type Cipher struct {
+	p              [18]uint32
+	s0, s1, s2, s3 [256]uint32
+}
+
+type KeySizeError int
+
+func (k KeySizeError) Error() string {
+	return "crypto/blowfish: invalid key size " + strconv.Itoa(int(k))
+}
+
+// NewCipher creates and returns a Cipher.
+// The key argument should be the Blowfish key, from 1 to 56 bytes.
+func NewCipher(key []byte) (*Cipher, error) {
+	var result Cipher
+	if k := len(key); k < 1 || k > 56 {
+		return nil, KeySizeError(k)
+	}
+	initCipher(&result)
+	ExpandKey(key, &result)
+	return &result, nil
+}
+
+// NewSaltedCipher creates a returns a Cipher that folds a salt into its key
+// schedule. For most purposes, NewCipher, instead of NewSaltedCipher, is
+// sufficient and desirable. For bcrypt compatibility, the key can be over 56
+// bytes.
+func NewSaltedCipher(key, salt []byte) (*Cipher, error) {
+	if len(salt) == 0 {
+		return NewCipher(key)
+	}
+	var result Cipher
+	if k := len(key); k < 1 {
+		return nil, KeySizeError(k)
+	}
+	initCipher(&result)
+	expandKeyWithSalt(key, salt, &result)
+	return &result, nil
+}
+
+// BlockSize returns the Blowfish block size, 8 bytes.
+// It is necessary to satisfy the Block interface in the
+// package "crypto/cipher".
+func (c *Cipher) BlockSize() int { return BlockSize }
+
+// Encrypt encrypts the 8-byte buffer src using the key k
+// and stores the result in dst.
+// Note that for amounts of data larger than a block,
+// it is not safe to just call Encrypt on successive blocks;
+// instead, use an encryption mode like CBC (see crypto/cipher/cbc.go).
+func (c *Cipher) Encrypt(dst, src []byte) {
+	l := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
+	r := uint32(src[4])<<24 | uint32(src[5])<<16 | uint32(src[6])<<8 | uint32(src[7])
+	l, r = encryptBlock(l, r, c)
+	dst[0], dst[1], dst[2], dst[3] = byte(l>>24), byte(l>>16), byte(l>>8), byte(l)
+	dst[4], dst[5], dst[6], dst[7] = byte(r>>24), byte(r>>16), byte(r>>8), byte(r)
+}
+
+// Decrypt decrypts the 8-byte buffer src using the key k
+// and stores the result in dst.
+func (c *Cipher) Decrypt(dst, src []byte) {
+	l := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
+	r := uint32(src[4])<<24 | uint32(src[5])<<16 | uint32(src[6])<<8 | uint32(src[7])
+	l, r = decryptBlock(l, r, c)
+	dst[0], dst[1], dst[2], dst[3] = byte(l>>24), byte(l>>16), byte(l>>8), byte(l)
+	dst[4], dst[5], dst[6], dst[7] = byte(r>>24), byte(r>>16), byte(r>>8), byte(r)
+}
+
+func initCipher(c *Cipher) {
+	copy(c.p[0:], p[0:])
+	copy(c.s0[0:], s0[0:])
+	copy(c.s1[0:], s1[0:])
+	copy(c.s2[0:], s2[0:])
+	copy(c.s3[0:], s3[0:])
+}
diff --git a/vendor/golang.org/x/crypto/blowfish/const.go b/vendor/golang.org/x/crypto/blowfish/const.go
new file mode 100644
index 0000000..d040775
--- /dev/null
+++ b/vendor/golang.org/x/crypto/blowfish/const.go
@@ -0,0 +1,199 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// The startup permutation array and substitution boxes.
+// They are the hexadecimal digits of PI; see:
+// https://www.schneier.com/code/constants.txt.
+
+package blowfish
+
+var s0 = [256]uint32{
+	0xd1310ba6, 0x98dfb5ac, 0x2ffd72db, 0xd01adfb7, 0xb8e1afed, 0x6a267e96,
+	0xba7c9045, 0xf12c7f99, 0x24a19947, 0xb3916cf7, 0x0801f2e2, 0x858efc16,
+	0x636920d8, 0x71574e69, 0xa458fea3, 0xf4933d7e, 0x0d95748f, 0x728eb658,
+	0x718bcd58, 0x82154aee, 0x7b54a41d, 0xc25a59b5, 0x9c30d539, 0x2af26013,
+	0xc5d1b023, 0x286085f0, 0xca417918, 0xb8db38ef, 0x8e79dcb0, 0x603a180e,
+	0x6c9e0e8b, 0xb01e8a3e, 0xd71577c1, 0xbd314b27, 0x78af2fda, 0x55605c60,
+	0xe65525f3, 0xaa55ab94, 0x57489862, 0x63e81440, 0x55ca396a, 0x2aab10b6,
+	0xb4cc5c34, 0x1141e8ce, 0xa15486af, 0x7c72e993, 0xb3ee1411, 0x636fbc2a,
+	0x2ba9c55d, 0x741831f6, 0xce5c3e16, 0x9b87931e, 0xafd6ba33, 0x6c24cf5c,
+	0x7a325381, 0x28958677, 0x3b8f4898, 0x6b4bb9af, 0xc4bfe81b, 0x66282193,
+	0x61d809cc, 0xfb21a991, 0x487cac60, 0x5dec8032, 0xef845d5d, 0xe98575b1,
+	0xdc262302, 0xeb651b88, 0x23893e81, 0xd396acc5, 0x0f6d6ff3, 0x83f44239,
+	0x2e0b4482, 0xa4842004, 0x69c8f04a, 0x9e1f9b5e, 0x21c66842, 0xf6e96c9a,
+	0x670c9c61, 0xabd388f0, 0x6a51a0d2, 0xd8542f68, 0x960fa728, 0xab5133a3,
+	0x6eef0b6c, 0x137a3be4, 0xba3bf050, 0x7efb2a98, 0xa1f1651d, 0x39af0176,
+	0x66ca593e, 0x82430e88, 0x8cee8619, 0x456f9fb4, 0x7d84a5c3, 0x3b8b5ebe,
+	0xe06f75d8, 0x85c12073, 0x401a449f, 0x56c16aa6, 0x4ed3aa62, 0x363f7706,
+	0x1bfedf72, 0x429b023d, 0x37d0d724, 0xd00a1248, 0xdb0fead3, 0x49f1c09b,
+	0x075372c9, 0x80991b7b, 0x25d479d8, 0xf6e8def7, 0xe3fe501a, 0xb6794c3b,
+	0x976ce0bd, 0x04c006ba, 0xc1a94fb6, 0x409f60c4, 0x5e5c9ec2, 0x196a2463,
+	0x68fb6faf, 0x3e6c53b5, 0x1339b2eb, 0x3b52ec6f, 0x6dfc511f, 0x9b30952c,
+	0xcc814544, 0xaf5ebd09, 0xbee3d004, 0xde334afd, 0x660f2807, 0x192e4bb3,
+	0xc0cba857, 0x45c8740f, 0xd20b5f39, 0xb9d3fbdb, 0x5579c0bd, 0x1a60320a,
+	0xd6a100c6, 0x402c7279, 0x679f25fe, 0xfb1fa3cc, 0x8ea5e9f8, 0xdb3222f8,
+	0x3c7516df, 0xfd616b15, 0x2f501ec8, 0xad0552ab, 0x323db5fa, 0xfd238760,
+	0x53317b48, 0x3e00df82, 0x9e5c57bb, 0xca6f8ca0, 0x1a87562e, 0xdf1769db,
+	0xd542a8f6, 0x287effc3, 0xac6732c6, 0x8c4f5573, 0x695b27b0, 0xbbca58c8,
+	0xe1ffa35d, 0xb8f011a0, 0x10fa3d98, 0xfd2183b8, 0x4afcb56c, 0x2dd1d35b,
+	0x9a53e479, 0xb6f84565, 0xd28e49bc, 0x4bfb9790, 0xe1ddf2da, 0xa4cb7e33,
+	0x62fb1341, 0xcee4c6e8, 0xef20cada, 0x36774c01, 0xd07e9efe, 0x2bf11fb4,
+	0x95dbda4d, 0xae909198, 0xeaad8e71, 0x6b93d5a0, 0xd08ed1d0, 0xafc725e0,
+	0x8e3c5b2f, 0x8e7594b7, 0x8ff6e2fb, 0xf2122b64, 0x8888b812, 0x900df01c,
+	0x4fad5ea0, 0x688fc31c, 0xd1cff191, 0xb3a8c1ad, 0x2f2f2218, 0xbe0e1777,
+	0xea752dfe, 0x8b021fa1, 0xe5a0cc0f, 0xb56f74e8, 0x18acf3d6, 0xce89e299,
+	0xb4a84fe0, 0xfd13e0b7, 0x7cc43b81, 0xd2ada8d9, 0x165fa266, 0x80957705,
+	0x93cc7314, 0x211a1477, 0xe6ad2065, 0x77b5fa86, 0xc75442f5, 0xfb9d35cf,
+	0xebcdaf0c, 0x7b3e89a0, 0xd6411bd3, 0xae1e7e49, 0x00250e2d, 0x2071b35e,
+	0x226800bb, 0x57b8e0af, 0x2464369b, 0xf009b91e, 0x5563911d, 0x59dfa6aa,
+	0x78c14389, 0xd95a537f, 0x207d5ba2, 0x02e5b9c5, 0x83260376, 0x6295cfa9,
+	0x11c81968, 0x4e734a41, 0xb3472dca, 0x7b14a94a, 0x1b510052, 0x9a532915,
+	0xd60f573f, 0xbc9bc6e4, 0x2b60a476, 0x81e67400, 0x08ba6fb5, 0x571be91f,
+	0xf296ec6b, 0x2a0dd915, 0xb6636521, 0xe7b9f9b6, 0xff34052e, 0xc5855664,
+	0x53b02d5d, 0xa99f8fa1, 0x08ba4799, 0x6e85076a,
+}
+
+var s1 = [256]uint32{
+	0x4b7a70e9, 0xb5b32944, 0xdb75092e, 0xc4192623, 0xad6ea6b0, 0x49a7df7d,
+	0x9cee60b8, 0x8fedb266, 0xecaa8c71, 0x699a17ff, 0x5664526c, 0xc2b19ee1,
+	0x193602a5, 0x75094c29, 0xa0591340, 0xe4183a3e, 0x3f54989a, 0x5b429d65,
+	0x6b8fe4d6, 0x99f73fd6, 0xa1d29c07, 0xefe830f5, 0x4d2d38e6, 0xf0255dc1,
+	0x4cdd2086, 0x8470eb26, 0x6382e9c6, 0x021ecc5e, 0x09686b3f, 0x3ebaefc9,
+	0x3c971814, 0x6b6a70a1, 0x687f3584, 0x52a0e286, 0xb79c5305, 0xaa500737,
+	0x3e07841c, 0x7fdeae5c, 0x8e7d44ec, 0x5716f2b8, 0xb03ada37, 0xf0500c0d,
+	0xf01c1f04, 0x0200b3ff, 0xae0cf51a, 0x3cb574b2, 0x25837a58, 0xdc0921bd,
+	0xd19113f9, 0x7ca92ff6, 0x94324773, 0x22f54701, 0x3ae5e581, 0x37c2dadc,
+	0xc8b57634, 0x9af3dda7, 0xa9446146, 0x0fd0030e, 0xecc8c73e, 0xa4751e41,
+	0xe238cd99, 0x3bea0e2f, 0x3280bba1, 0x183eb331, 0x4e548b38, 0x4f6db908,
+	0x6f420d03, 0xf60a04bf, 0x2cb81290, 0x24977c79, 0x5679b072, 0xbcaf89af,
+	0xde9a771f, 0xd9930810, 0xb38bae12, 0xdccf3f2e, 0x5512721f, 0x2e6b7124,
+	0x501adde6, 0x9f84cd87, 0x7a584718, 0x7408da17, 0xbc9f9abc, 0xe94b7d8c,
+	0xec7aec3a, 0xdb851dfa, 0x63094366, 0xc464c3d2, 0xef1c1847, 0x3215d908,
+	0xdd433b37, 0x24c2ba16, 0x12a14d43, 0x2a65c451, 0x50940002, 0x133ae4dd,
+	0x71dff89e, 0x10314e55, 0x81ac77d6, 0x5f11199b, 0x043556f1, 0xd7a3c76b,
+	0x3c11183b, 0x5924a509, 0xf28fe6ed, 0x97f1fbfa, 0x9ebabf2c, 0x1e153c6e,
+	0x86e34570, 0xeae96fb1, 0x860e5e0a, 0x5a3e2ab3, 0x771fe71c, 0x4e3d06fa,
+	0x2965dcb9, 0x99e71d0f, 0x803e89d6, 0x5266c825, 0x2e4cc978, 0x9c10b36a,
+	0xc6150eba, 0x94e2ea78, 0xa5fc3c53, 0x1e0a2df4, 0xf2f74ea7, 0x361d2b3d,
+	0x1939260f, 0x19c27960, 0x5223a708, 0xf71312b6, 0xebadfe6e, 0xeac31f66,
+	0xe3bc4595, 0xa67bc883, 0xb17f37d1, 0x018cff28, 0xc332ddef, 0xbe6c5aa5,
+	0x65582185, 0x68ab9802, 0xeecea50f, 0xdb2f953b, 0x2aef7dad, 0x5b6e2f84,
+	0x1521b628, 0x29076170, 0xecdd4775, 0x619f1510, 0x13cca830, 0xeb61bd96,
+	0x0334fe1e, 0xaa0363cf, 0xb5735c90, 0x4c70a239, 0xd59e9e0b, 0xcbaade14,
+	0xeecc86bc, 0x60622ca7, 0x9cab5cab, 0xb2f3846e, 0x648b1eaf, 0x19bdf0ca,
+	0xa02369b9, 0x655abb50, 0x40685a32, 0x3c2ab4b3, 0x319ee9d5, 0xc021b8f7,
+	0x9b540b19, 0x875fa099, 0x95f7997e, 0x623d7da8, 0xf837889a, 0x97e32d77,
+	0x11ed935f, 0x16681281, 0x0e358829, 0xc7e61fd6, 0x96dedfa1, 0x7858ba99,
+	0x57f584a5, 0x1b227263, 0x9b83c3ff, 0x1ac24696, 0xcdb30aeb, 0x532e3054,
+	0x8fd948e4, 0x6dbc3128, 0x58ebf2ef, 0x34c6ffea, 0xfe28ed61, 0xee7c3c73,
+	0x5d4a14d9, 0xe864b7e3, 0x42105d14, 0x203e13e0, 0x45eee2b6, 0xa3aaabea,
+	0xdb6c4f15, 0xfacb4fd0, 0xc742f442, 0xef6abbb5, 0x654f3b1d, 0x41cd2105,
+	0xd81e799e, 0x86854dc7, 0xe44b476a, 0x3d816250, 0xcf62a1f2, 0x5b8d2646,
+	0xfc8883a0, 0xc1c7b6a3, 0x7f1524c3, 0x69cb7492, 0x47848a0b, 0x5692b285,
+	0x095bbf00, 0xad19489d, 0x1462b174, 0x23820e00, 0x58428d2a, 0x0c55f5ea,
+	0x1dadf43e, 0x233f7061, 0x3372f092, 0x8d937e41, 0xd65fecf1, 0x6c223bdb,
+	0x7cde3759, 0xcbee7460, 0x4085f2a7, 0xce77326e, 0xa6078084, 0x19f8509e,
+	0xe8efd855, 0x61d99735, 0xa969a7aa, 0xc50c06c2, 0x5a04abfc, 0x800bcadc,
+	0x9e447a2e, 0xc3453484, 0xfdd56705, 0x0e1e9ec9, 0xdb73dbd3, 0x105588cd,
+	0x675fda79, 0xe3674340, 0xc5c43465, 0x713e38d8, 0x3d28f89e, 0xf16dff20,
+	0x153e21e7, 0x8fb03d4a, 0xe6e39f2b, 0xdb83adf7,
+}
+
+var s2 = [256]uint32{
+	0xe93d5a68, 0x948140f7, 0xf64c261c, 0x94692934, 0x411520f7, 0x7602d4f7,
+	0xbcf46b2e, 0xd4a20068, 0xd4082471, 0x3320f46a, 0x43b7d4b7, 0x500061af,
+	0x1e39f62e, 0x97244546, 0x14214f74, 0xbf8b8840, 0x4d95fc1d, 0x96b591af,
+	0x70f4ddd3, 0x66a02f45, 0xbfbc09ec, 0x03bd9785, 0x7fac6dd0, 0x31cb8504,
+	0x96eb27b3, 0x55fd3941, 0xda2547e6, 0xabca0a9a, 0x28507825, 0x530429f4,
+	0x0a2c86da, 0xe9b66dfb, 0x68dc1462, 0xd7486900, 0x680ec0a4, 0x27a18dee,
+	0x4f3ffea2, 0xe887ad8c, 0xb58ce006, 0x7af4d6b6, 0xaace1e7c, 0xd3375fec,
+	0xce78a399, 0x406b2a42, 0x20fe9e35, 0xd9f385b9, 0xee39d7ab, 0x3b124e8b,
+	0x1dc9faf7, 0x4b6d1856, 0x26a36631, 0xeae397b2, 0x3a6efa74, 0xdd5b4332,
+	0x6841e7f7, 0xca7820fb, 0xfb0af54e, 0xd8feb397, 0x454056ac, 0xba489527,
+	0x55533a3a, 0x20838d87, 0xfe6ba9b7, 0xd096954b, 0x55a867bc, 0xa1159a58,
+	0xcca92963, 0x99e1db33, 0xa62a4a56, 0x3f3125f9, 0x5ef47e1c, 0x9029317c,
+	0xfdf8e802, 0x04272f70, 0x80bb155c, 0x05282ce3, 0x95c11548, 0xe4c66d22,
+	0x48c1133f, 0xc70f86dc, 0x07f9c9ee, 0x41041f0f, 0x404779a4, 0x5d886e17,
+	0x325f51eb, 0xd59bc0d1, 0xf2bcc18f, 0x41113564, 0x257b7834, 0x602a9c60,
+	0xdff8e8a3, 0x1f636c1b, 0x0e12b4c2, 0x02e1329e, 0xaf664fd1, 0xcad18115,
+	0x6b2395e0, 0x333e92e1, 0x3b240b62, 0xeebeb922, 0x85b2a20e, 0xe6ba0d99,
+	0xde720c8c, 0x2da2f728, 0xd0127845, 0x95b794fd, 0x647d0862, 0xe7ccf5f0,
+	0x5449a36f, 0x877d48fa, 0xc39dfd27, 0xf33e8d1e, 0x0a476341, 0x992eff74,
+	0x3a6f6eab, 0xf4f8fd37, 0xa812dc60, 0xa1ebddf8, 0x991be14c, 0xdb6e6b0d,
+	0xc67b5510, 0x6d672c37, 0x2765d43b, 0xdcd0e804, 0xf1290dc7, 0xcc00ffa3,
+	0xb5390f92, 0x690fed0b, 0x667b9ffb, 0xcedb7d9c, 0xa091cf0b, 0xd9155ea3,
+	0xbb132f88, 0x515bad24, 0x7b9479bf, 0x763bd6eb, 0x37392eb3, 0xcc115979,
+	0x8026e297, 0xf42e312d, 0x6842ada7, 0xc66a2b3b, 0x12754ccc, 0x782ef11c,
+	0x6a124237, 0xb79251e7, 0x06a1bbe6, 0x4bfb6350, 0x1a6b1018, 0x11caedfa,
+	0x3d25bdd8, 0xe2e1c3c9, 0x44421659, 0x0a121386, 0xd90cec6e, 0xd5abea2a,
+	0x64af674e, 0xda86a85f, 0xbebfe988, 0x64e4c3fe, 0x9dbc8057, 0xf0f7c086,
+	0x60787bf8, 0x6003604d, 0xd1fd8346, 0xf6381fb0, 0x7745ae04, 0xd736fccc,
+	0x83426b33, 0xf01eab71, 0xb0804187, 0x3c005e5f, 0x77a057be, 0xbde8ae24,
+	0x55464299, 0xbf582e61, 0x4e58f48f, 0xf2ddfda2, 0xf474ef38, 0x8789bdc2,
+	0x5366f9c3, 0xc8b38e74, 0xb475f255, 0x46fcd9b9, 0x7aeb2661, 0x8b1ddf84,
+	0x846a0e79, 0x915f95e2, 0x466e598e, 0x20b45770, 0x8cd55591, 0xc902de4c,
+	0xb90bace1, 0xbb8205d0, 0x11a86248, 0x7574a99e, 0xb77f19b6, 0xe0a9dc09,
+	0x662d09a1, 0xc4324633, 0xe85a1f02, 0x09f0be8c, 0x4a99a025, 0x1d6efe10,
+	0x1ab93d1d, 0x0ba5a4df, 0xa186f20f, 0x2868f169, 0xdcb7da83, 0x573906fe,
+	0xa1e2ce9b, 0x4fcd7f52, 0x50115e01, 0xa70683fa, 0xa002b5c4, 0x0de6d027,
+	0x9af88c27, 0x773f8641, 0xc3604c06, 0x61a806b5, 0xf0177a28, 0xc0f586e0,
+	0x006058aa, 0x30dc7d62, 0x11e69ed7, 0x2338ea63, 0x53c2dd94, 0xc2c21634,
+	0xbbcbee56, 0x90bcb6de, 0xebfc7da1, 0xce591d76, 0x6f05e409, 0x4b7c0188,
+	0x39720a3d, 0x7c927c24, 0x86e3725f, 0x724d9db9, 0x1ac15bb4, 0xd39eb8fc,
+	0xed545578, 0x08fca5b5, 0xd83d7cd3, 0x4dad0fc4, 0x1e50ef5e, 0xb161e6f8,
+	0xa28514d9, 0x6c51133c, 0x6fd5c7e7, 0x56e14ec4, 0x362abfce, 0xddc6c837,
+	0xd79a3234, 0x92638212, 0x670efa8e, 0x406000e0,
+}
+
+var s3 = [256]uint32{
+	0x3a39ce37, 0xd3faf5cf, 0xabc27737, 0x5ac52d1b, 0x5cb0679e, 0x4fa33742,
+	0xd3822740, 0x99bc9bbe, 0xd5118e9d, 0xbf0f7315, 0xd62d1c7e, 0xc700c47b,
+	0xb78c1b6b, 0x21a19045, 0xb26eb1be, 0x6a366eb4, 0x5748ab2f, 0xbc946e79,
+	0xc6a376d2, 0x6549c2c8, 0x530ff8ee, 0x468dde7d, 0xd5730a1d, 0x4cd04dc6,
+	0x2939bbdb, 0xa9ba4650, 0xac9526e8, 0xbe5ee304, 0xa1fad5f0, 0x6a2d519a,
+	0x63ef8ce2, 0x9a86ee22, 0xc089c2b8, 0x43242ef6, 0xa51e03aa, 0x9cf2d0a4,
+	0x83c061ba, 0x9be96a4d, 0x8fe51550, 0xba645bd6, 0x2826a2f9, 0xa73a3ae1,
+	0x4ba99586, 0xef5562e9, 0xc72fefd3, 0xf752f7da, 0x3f046f69, 0x77fa0a59,
+	0x80e4a915, 0x87b08601, 0x9b09e6ad, 0x3b3ee593, 0xe990fd5a, 0x9e34d797,
+	0x2cf0b7d9, 0x022b8b51, 0x96d5ac3a, 0x017da67d, 0xd1cf3ed6, 0x7c7d2d28,
+	0x1f9f25cf, 0xadf2b89b, 0x5ad6b472, 0x5a88f54c, 0xe029ac71, 0xe019a5e6,
+	0x47b0acfd, 0xed93fa9b, 0xe8d3c48d, 0x283b57cc, 0xf8d56629, 0x79132e28,
+	0x785f0191, 0xed756055, 0xf7960e44, 0xe3d35e8c, 0x15056dd4, 0x88f46dba,
+	0x03a16125, 0x0564f0bd, 0xc3eb9e15, 0x3c9057a2, 0x97271aec, 0xa93a072a,
+	0x1b3f6d9b, 0x1e6321f5, 0xf59c66fb, 0x26dcf319, 0x7533d928, 0xb155fdf5,
+	0x03563482, 0x8aba3cbb, 0x28517711, 0xc20ad9f8, 0xabcc5167, 0xccad925f,
+	0x4de81751, 0x3830dc8e, 0x379d5862, 0x9320f991, 0xea7a90c2, 0xfb3e7bce,
+	0x5121ce64, 0x774fbe32, 0xa8b6e37e, 0xc3293d46, 0x48de5369, 0x6413e680,
+	0xa2ae0810, 0xdd6db224, 0x69852dfd, 0x09072166, 0xb39a460a, 0x6445c0dd,
+	0x586cdecf, 0x1c20c8ae, 0x5bbef7dd, 0x1b588d40, 0xccd2017f, 0x6bb4e3bb,
+	0xdda26a7e, 0x3a59ff45, 0x3e350a44, 0xbcb4cdd5, 0x72eacea8, 0xfa6484bb,
+	0x8d6612ae, 0xbf3c6f47, 0xd29be463, 0x542f5d9e, 0xaec2771b, 0xf64e6370,
+	0x740e0d8d, 0xe75b1357, 0xf8721671, 0xaf537d5d, 0x4040cb08, 0x4eb4e2cc,
+	0x34d2466a, 0x0115af84, 0xe1b00428, 0x95983a1d, 0x06b89fb4, 0xce6ea048,
+	0x6f3f3b82, 0x3520ab82, 0x011a1d4b, 0x277227f8, 0x611560b1, 0xe7933fdc,
+	0xbb3a792b, 0x344525bd, 0xa08839e1, 0x51ce794b, 0x2f32c9b7, 0xa01fbac9,
+	0xe01cc87e, 0xbcc7d1f6, 0xcf0111c3, 0xa1e8aac7, 0x1a908749, 0xd44fbd9a,
+	0xd0dadecb, 0xd50ada38, 0x0339c32a, 0xc6913667, 0x8df9317c, 0xe0b12b4f,
+	0xf79e59b7, 0x43f5bb3a, 0xf2d519ff, 0x27d9459c, 0xbf97222c, 0x15e6fc2a,
+	0x0f91fc71, 0x9b941525, 0xfae59361, 0xceb69ceb, 0xc2a86459, 0x12baa8d1,
+	0xb6c1075e, 0xe3056a0c, 0x10d25065, 0xcb03a442, 0xe0ec6e0e, 0x1698db3b,
+	0x4c98a0be, 0x3278e964, 0x9f1f9532, 0xe0d392df, 0xd3a0342b, 0x8971f21e,
+	0x1b0a7441, 0x4ba3348c, 0xc5be7120, 0xc37632d8, 0xdf359f8d, 0x9b992f2e,
+	0xe60b6f47, 0x0fe3f11d, 0xe54cda54, 0x1edad891, 0xce6279cf, 0xcd3e7e6f,
+	0x1618b166, 0xfd2c1d05, 0x848fd2c5, 0xf6fb2299, 0xf523f357, 0xa6327623,
+	0x93a83531, 0x56cccd02, 0xacf08162, 0x5a75ebb5, 0x6e163697, 0x88d273cc,
+	0xde966292, 0x81b949d0, 0x4c50901b, 0x71c65614, 0xe6c6c7bd, 0x327a140a,
+	0x45e1d006, 0xc3f27b9a, 0xc9aa53fd, 0x62a80f00, 0xbb25bfe2, 0x35bdd2f6,
+	0x71126905, 0xb2040222, 0xb6cbcf7c, 0xcd769c2b, 0x53113ec0, 0x1640e3d3,
+	0x38abbd60, 0x2547adf0, 0xba38209c, 0xf746ce76, 0x77afa1c5, 0x20756060,
+	0x85cbfe4e, 0x8ae88dd8, 0x7aaaf9b0, 0x4cf9aa7e, 0x1948c25c, 0x02fb8a8c,
+	0x01c36ae4, 0xd6ebe1f9, 0x90d4f869, 0xa65cdea0, 0x3f09252d, 0xc208e69f,
+	0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
+}
+
+var p = [18]uint32{
+	0x243f6a88, 0x85a308d3, 0x13198a2e, 0x03707344, 0xa4093822, 0x299f31d0,
+	0x082efa98, 0xec4e6c89, 0x452821e6, 0x38d01377, 0xbe5466cf, 0x34e90c6c,
+	0xc0ac29b7, 0xc97c50dd, 0x3f84d5b5, 0xb5470917, 0x9216d5d9, 0x8979fb1b,
+}
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/terminal.go b/vendor/golang.org/x/crypto/ssh/terminal/terminal.go
new file mode 100644
index 0000000..2f04ee5
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/terminal.go
@@ -0,0 +1,966 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package terminal
+
+import (
+	"bytes"
+	"io"
+	"strconv"
+	"sync"
+	"unicode/utf8"
+)
+
+// EscapeCodes contains escape sequences that can be written to the terminal in
+// order to achieve different styles of text.
+type EscapeCodes struct {
+	// Foreground colors
+	Black, Red, Green, Yellow, Blue, Magenta, Cyan, White []byte
+
+	// Reset all attributes
+	Reset []byte
+}
+
+var vt100EscapeCodes = EscapeCodes{
+	Black:   []byte{keyEscape, '[', '3', '0', 'm'},
+	Red:     []byte{keyEscape, '[', '3', '1', 'm'},
+	Green:   []byte{keyEscape, '[', '3', '2', 'm'},
+	Yellow:  []byte{keyEscape, '[', '3', '3', 'm'},
+	Blue:    []byte{keyEscape, '[', '3', '4', 'm'},
+	Magenta: []byte{keyEscape, '[', '3', '5', 'm'},
+	Cyan:    []byte{keyEscape, '[', '3', '6', 'm'},
+	White:   []byte{keyEscape, '[', '3', '7', 'm'},
+
+	Reset: []byte{keyEscape, '[', '0', 'm'},
+}
+
+// Terminal contains the state for running a VT100 terminal that is capable of
+// reading lines of input.
+type Terminal struct {
+	// AutoCompleteCallback, if non-null, is called for each keypress with
+	// the full input line and the current position of the cursor (in
+	// bytes, as an index into |line|). If it returns ok=false, the key
+	// press is processed normally. Otherwise it returns a replacement line
+	// and the new cursor position.
+	AutoCompleteCallback func(line string, pos int, key rune) (newLine string, newPos int, ok bool)
+
+	// Escape contains a pointer to the escape codes for this terminal.
+	// It's always a valid pointer, although the escape codes themselves
+	// may be empty if the terminal doesn't support them.
+	Escape *EscapeCodes
+
+	// lock protects the terminal and the state in this object from
+	// concurrent processing of a key press and a Write() call.
+	lock sync.Mutex
+
+	c      io.ReadWriter
+	prompt []rune
+
+	// line is the current line being entered.
+	line []rune
+	// pos is the logical position of the cursor in line
+	pos int
+	// echo is true if local echo is enabled
+	echo bool
+	// pasteActive is true iff there is a bracketed paste operation in
+	// progress.
+	pasteActive bool
+
+	// cursorX contains the current X value of the cursor where the left
+	// edge is 0. cursorY contains the row number where the first row of
+	// the current line is 0.
+	cursorX, cursorY int
+	// maxLine is the greatest value of cursorY so far.
+	maxLine int
+
+	termWidth, termHeight int
+
+	// outBuf contains the terminal data to be sent.
+	outBuf []byte
+	// remainder contains the remainder of any partial key sequences after
+	// a read. It aliases into inBuf.
+	remainder []byte
+	inBuf     [256]byte
+
+	// history contains previously entered commands so that they can be
+	// accessed with the up and down keys.
+	history stRingBuffer
+	// historyIndex stores the currently accessed history entry, where zero
+	// means the immediately previous entry.
+	historyIndex int
+	// When navigating up and down the history it's possible to return to
+	// the incomplete, initial line. That value is stored in
+	// historyPending.
+	historyPending string
+}
+
+// NewTerminal runs a VT100 terminal on the given ReadWriter. If the ReadWriter is
+// a local terminal, that terminal must first have been put into raw mode.
+// prompt is a string that is written at the start of each input line (i.e.
+// "> ").
+func NewTerminal(c io.ReadWriter, prompt string) *Terminal {
+	return &Terminal{
+		Escape:       &vt100EscapeCodes,
+		c:            c,
+		prompt:       []rune(prompt),
+		termWidth:    80,
+		termHeight:   24,
+		echo:         true,
+		historyIndex: -1,
+	}
+}
+
+const (
+	keyCtrlD     = 4
+	keyCtrlU     = 21
+	keyEnter     = '\r'
+	keyEscape    = 27
+	keyBackspace = 127
+	keyUnknown   = 0xd800 /* UTF-16 surrogate area */ + iota
+	keyUp
+	keyDown
+	keyLeft
+	keyRight
+	keyAltLeft
+	keyAltRight
+	keyHome
+	keyEnd
+	keyDeleteWord
+	keyDeleteLine
+	keyClearScreen
+	keyPasteStart
+	keyPasteEnd
+)
+
+var (
+	crlf       = []byte{'\r', '\n'}
+	pasteStart = []byte{keyEscape, '[', '2', '0', '0', '~'}
+	pasteEnd   = []byte{keyEscape, '[', '2', '0', '1', '~'}
+)
+
+// bytesToKey tries to parse a key sequence from b. If successful, it returns
+// the key and the remainder of the input. Otherwise it returns utf8.RuneError.
+func bytesToKey(b []byte, pasteActive bool) (rune, []byte) {
+	if len(b) == 0 {
+		return utf8.RuneError, nil
+	}
+
+	if !pasteActive {
+		switch b[0] {
+		case 1: // ^A
+			return keyHome, b[1:]
+		case 5: // ^E
+			return keyEnd, b[1:]
+		case 8: // ^H
+			return keyBackspace, b[1:]
+		case 11: // ^K
+			return keyDeleteLine, b[1:]
+		case 12: // ^L
+			return keyClearScreen, b[1:]
+		case 23: // ^W
+			return keyDeleteWord, b[1:]
+		case 14: // ^N
+			return keyDown, b[1:]
+		case 16: // ^P
+			return keyUp, b[1:]
+		}
+	}
+
+	if b[0] != keyEscape {
+		if !utf8.FullRune(b) {
+			return utf8.RuneError, b
+		}
+		r, l := utf8.DecodeRune(b)
+		return r, b[l:]
+	}
+
+	if !pasteActive && len(b) >= 3 && b[0] == keyEscape && b[1] == '[' {
+		switch b[2] {
+		case 'A':
+			return keyUp, b[3:]
+		case 'B':
+			return keyDown, b[3:]
+		case 'C':
+			return keyRight, b[3:]
+		case 'D':
+			return keyLeft, b[3:]
+		case 'H':
+			return keyHome, b[3:]
+		case 'F':
+			return keyEnd, b[3:]
+		}
+	}
+
+	if !pasteActive && len(b) >= 6 && b[0] == keyEscape && b[1] == '[' && b[2] == '1' && b[3] == ';' && b[4] == '3' {
+		switch b[5] {
+		case 'C':
+			return keyAltRight, b[6:]
+		case 'D':
+			return keyAltLeft, b[6:]
+		}
+	}
+
+	if !pasteActive && len(b) >= 6 && bytes.Equal(b[:6], pasteStart) {
+		return keyPasteStart, b[6:]
+	}
+
+	if pasteActive && len(b) >= 6 && bytes.Equal(b[:6], pasteEnd) {
+		return keyPasteEnd, b[6:]
+	}
+
+	// If we get here then we have a key that we don't recognise, or a
+	// partial sequence. It's not clear how one should find the end of a
+	// sequence without knowing them all, but it seems that [a-zA-Z~] only
+	// appears at the end of a sequence.
+	for i, c := range b[0:] {
+		if c >= 'a' && c <= 'z' || c >= 'A' && c <= 'Z' || c == '~' {
+			return keyUnknown, b[i+1:]
+		}
+	}
+
+	return utf8.RuneError, b
+}
+
+// queue appends data to the end of t.outBuf
+func (t *Terminal) queue(data []rune) {
+	t.outBuf = append(t.outBuf, []byte(string(data))...)
+}
+
+var eraseUnderCursor = []rune{' ', keyEscape, '[', 'D'}
+var space = []rune{' '}
+
+func isPrintable(key rune) bool {
+	isInSurrogateArea := key >= 0xd800 && key <= 0xdbff
+	return key >= 32 && !isInSurrogateArea
+}
+
+// moveCursorToPos appends data to t.outBuf which will move the cursor to the
+// given, logical position in the text.
+func (t *Terminal) moveCursorToPos(pos int) {
+	if !t.echo {
+		return
+	}
+
+	x := visualLength(t.prompt) + pos
+	y := x / t.termWidth
+	x = x % t.termWidth
+
+	up := 0
+	if y < t.cursorY {
+		up = t.cursorY - y
+	}
+
+	down := 0
+	if y > t.cursorY {
+		down = y - t.cursorY
+	}
+
+	left := 0
+	if x < t.cursorX {
+		left = t.cursorX - x
+	}
+
+	right := 0
+	if x > t.cursorX {
+		right = x - t.cursorX
+	}
+
+	t.cursorX = x
+	t.cursorY = y
+	t.move(up, down, left, right)
+}
+
+func (t *Terminal) move(up, down, left, right int) {
+	m := []rune{}
+
+	// 1 unit up can be expressed as ^[[A or ^[A
+	// 5 units up can be expressed as ^[[5A
+
+	if up == 1 {
+		m = append(m, keyEscape, '[', 'A')
+	} else if up > 1 {
+		m = append(m, keyEscape, '[')
+		m = append(m, []rune(strconv.Itoa(up))...)
+		m = append(m, 'A')
+	}
+
+	if down == 1 {
+		m = append(m, keyEscape, '[', 'B')
+	} else if down > 1 {
+		m = append(m, keyEscape, '[')
+		m = append(m, []rune(strconv.Itoa(down))...)
+		m = append(m, 'B')
+	}
+
+	if right == 1 {
+		m = append(m, keyEscape, '[', 'C')
+	} else if right > 1 {
+		m = append(m, keyEscape, '[')
+		m = append(m, []rune(strconv.Itoa(right))...)
+		m = append(m, 'C')
+	}
+
+	if left == 1 {
+		m = append(m, keyEscape, '[', 'D')
+	} else if left > 1 {
+		m = append(m, keyEscape, '[')
+		m = append(m, []rune(strconv.Itoa(left))...)
+		m = append(m, 'D')
+	}
+
+	t.queue(m)
+}
+
+func (t *Terminal) clearLineToRight() {
+	op := []rune{keyEscape, '[', 'K'}
+	t.queue(op)
+}
+
+const maxLineLength = 4096
+
+func (t *Terminal) setLine(newLine []rune, newPos int) {
+	if t.echo {
+		t.moveCursorToPos(0)
+		t.writeLine(newLine)
+		for i := len(newLine); i < len(t.line); i++ {
+			t.writeLine(space)
+		}
+		t.moveCursorToPos(newPos)
+	}
+	t.line = newLine
+	t.pos = newPos
+}
+
+func (t *Terminal) advanceCursor(places int) {
+	t.cursorX += places
+	t.cursorY += t.cursorX / t.termWidth
+	if t.cursorY > t.maxLine {
+		t.maxLine = t.cursorY
+	}
+	t.cursorX = t.cursorX % t.termWidth
+
+	if places > 0 && t.cursorX == 0 {
+		// Normally terminals will advance the current position
+		// when writing a character. But that doesn't happen
+		// for the last character in a line. However, when
+		// writing a character (except a new line) that causes
+		// a line wrap, the position will be advanced two
+		// places.
+		//
+		// So, if we are stopping at the end of a line, we
+		// need to write a newline so that our cursor can be
+		// advanced to the next line.
+		t.outBuf = append(t.outBuf, '\r', '\n')
+	}
+}
+
+func (t *Terminal) eraseNPreviousChars(n int) {
+	if n == 0 {
+		return
+	}
+
+	if t.pos < n {
+		n = t.pos
+	}
+	t.pos -= n
+	t.moveCursorToPos(t.pos)
+
+	copy(t.line[t.pos:], t.line[n+t.pos:])
+	t.line = t.line[:len(t.line)-n]
+	if t.echo {
+		t.writeLine(t.line[t.pos:])
+		for i := 0; i < n; i++ {
+			t.queue(space)
+		}
+		t.advanceCursor(n)
+		t.moveCursorToPos(t.pos)
+	}
+}
+
+// countToLeftWord returns then number of characters from the cursor to the
+// start of the previous word.
+func (t *Terminal) countToLeftWord() int {
+	if t.pos == 0 {
+		return 0
+	}
+
+	pos := t.pos - 1
+	for pos > 0 {
+		if t.line[pos] != ' ' {
+			break
+		}
+		pos--
+	}
+	for pos > 0 {
+		if t.line[pos] == ' ' {
+			pos++
+			break
+		}
+		pos--
+	}
+
+	return t.pos - pos
+}
+
+// countToRightWord returns then number of characters from the cursor to the
+// start of the next word.
+func (t *Terminal) countToRightWord() int {
+	pos := t.pos
+	for pos < len(t.line) {
+		if t.line[pos] == ' ' {
+			break
+		}
+		pos++
+	}
+	for pos < len(t.line) {
+		if t.line[pos] != ' ' {
+			break
+		}
+		pos++
+	}
+	return pos - t.pos
+}
+
+// visualLength returns the number of visible glyphs in s.
+func visualLength(runes []rune) int {
+	inEscapeSeq := false
+	length := 0
+
+	for _, r := range runes {
+		switch {
+		case inEscapeSeq:
+			if (r >= 'a' && r <= 'z') || (r >= 'A' && r <= 'Z') {
+				inEscapeSeq = false
+			}
+		case r == '\x1b':
+			inEscapeSeq = true
+		default:
+			length++
+		}
+	}
+
+	return length
+}
+
+// handleKey processes the given key and, optionally, returns a line of text
+// that the user has entered.
+func (t *Terminal) handleKey(key rune) (line string, ok bool) {
+	if t.pasteActive && key != keyEnter {
+		t.addKeyToLine(key)
+		return
+	}
+
+	switch key {
+	case keyBackspace:
+		if t.pos == 0 {
+			return
+		}
+		t.eraseNPreviousChars(1)
+	case keyAltLeft:
+		// move left by a word.
+		t.pos -= t.countToLeftWord()
+		t.moveCursorToPos(t.pos)
+	case keyAltRight:
+		// move right by a word.
+		t.pos += t.countToRightWord()
+		t.moveCursorToPos(t.pos)
+	case keyLeft:
+		if t.pos == 0 {
+			return
+		}
+		t.pos--
+		t.moveCursorToPos(t.pos)
+	case keyRight:
+		if t.pos == len(t.line) {
+			return
+		}
+		t.pos++
+		t.moveCursorToPos(t.pos)
+	case keyHome:
+		if t.pos == 0 {
+			return
+		}
+		t.pos = 0
+		t.moveCursorToPos(t.pos)
+	case keyEnd:
+		if t.pos == len(t.line) {
+			return
+		}
+		t.pos = len(t.line)
+		t.moveCursorToPos(t.pos)
+	case keyUp:
+		entry, ok := t.history.NthPreviousEntry(t.historyIndex + 1)
+		if !ok {
+			return "", false
+		}
+		if t.historyIndex == -1 {
+			t.historyPending = string(t.line)
+		}
+		t.historyIndex++
+		runes := []rune(entry)
+		t.setLine(runes, len(runes))
+	case keyDown:
+		switch t.historyIndex {
+		case -1:
+			return
+		case 0:
+			runes := []rune(t.historyPending)
+			t.setLine(runes, len(runes))
+			t.historyIndex--
+		default:
+			entry, ok := t.history.NthPreviousEntry(t.historyIndex - 1)
+			if ok {
+				t.historyIndex--
+				runes := []rune(entry)
+				t.setLine(runes, len(runes))
+			}
+		}
+	case keyEnter:
+		t.moveCursorToPos(len(t.line))
+		t.queue([]rune("\r\n"))
+		line = string(t.line)
+		ok = true
+		t.line = t.line[:0]
+		t.pos = 0
+		t.cursorX = 0
+		t.cursorY = 0
+		t.maxLine = 0
+	case keyDeleteWord:
+		// Delete zero or more spaces and then one or more characters.
+		t.eraseNPreviousChars(t.countToLeftWord())
+	case keyDeleteLine:
+		// Delete everything from the current cursor position to the
+		// end of line.
+		for i := t.pos; i < len(t.line); i++ {
+			t.queue(space)
+			t.advanceCursor(1)
+		}
+		t.line = t.line[:t.pos]
+		t.moveCursorToPos(t.pos)
+	case keyCtrlD:
+		// Erase the character under the current position.
+		// The EOF case when the line is empty is handled in
+		// readLine().
+		if t.pos < len(t.line) {
+			t.pos++
+			t.eraseNPreviousChars(1)
+		}
+	case keyCtrlU:
+		t.eraseNPreviousChars(t.pos)
+	case keyClearScreen:
+		// Erases the screen and moves the cursor to the home position.
+		t.queue([]rune("\x1b[2J\x1b[H"))
+		t.queue(t.prompt)
+		t.cursorX, t.cursorY = 0, 0
+		t.advanceCursor(visualLength(t.prompt))
+		t.setLine(t.line, t.pos)
+	default:
+		if t.AutoCompleteCallback != nil {
+			prefix := string(t.line[:t.pos])
+			suffix := string(t.line[t.pos:])
+
+			t.lock.Unlock()
+			newLine, newPos, completeOk := t.AutoCompleteCallback(prefix+suffix, len(prefix), key)
+			t.lock.Lock()
+
+			if completeOk {
+				t.setLine([]rune(newLine), utf8.RuneCount([]byte(newLine)[:newPos]))
+				return
+			}
+		}
+		if !isPrintable(key) {
+			return
+		}
+		if len(t.line) == maxLineLength {
+			return
+		}
+		t.addKeyToLine(key)
+	}
+	return
+}
+
+// addKeyToLine inserts the given key at the current position in the current
+// line.
+func (t *Terminal) addKeyToLine(key rune) {
+	if len(t.line) == cap(t.line) {
+		newLine := make([]rune, len(t.line), 2*(1+len(t.line)))
+		copy(newLine, t.line)
+		t.line = newLine
+	}
+	t.line = t.line[:len(t.line)+1]
+	copy(t.line[t.pos+1:], t.line[t.pos:])
+	t.line[t.pos] = key
+	if t.echo {
+		t.writeLine(t.line[t.pos:])
+	}
+	t.pos++
+	t.moveCursorToPos(t.pos)
+}
+
+func (t *Terminal) writeLine(line []rune) {
+	for len(line) != 0 {
+		remainingOnLine := t.termWidth - t.cursorX
+		todo := len(line)
+		if todo > remainingOnLine {
+			todo = remainingOnLine
+		}
+		t.queue(line[:todo])
+		t.advanceCursor(visualLength(line[:todo]))
+		line = line[todo:]
+	}
+}
+
+// writeWithCRLF writes buf to w but replaces all occurrences of \n with \r\n.
+func writeWithCRLF(w io.Writer, buf []byte) (n int, err error) {
+	for len(buf) > 0 {
+		i := bytes.IndexByte(buf, '\n')
+		todo := len(buf)
+		if i >= 0 {
+			todo = i
+		}
+
+		var nn int
+		nn, err = w.Write(buf[:todo])
+		n += nn
+		if err != nil {
+			return n, err
+		}
+		buf = buf[todo:]
+
+		if i >= 0 {
+			if _, err = w.Write(crlf); err != nil {
+				return n, err
+			}
+			n++
+			buf = buf[1:]
+		}
+	}
+
+	return n, nil
+}
+
+func (t *Terminal) Write(buf []byte) (n int, err error) {
+	t.lock.Lock()
+	defer t.lock.Unlock()
+
+	if t.cursorX == 0 && t.cursorY == 0 {
+		// This is the easy case: there's nothing on the screen that we
+		// have to move out of the way.
+		return writeWithCRLF(t.c, buf)
+	}
+
+	// We have a prompt and possibly user input on the screen. We
+	// have to clear it first.
+	t.move(0 /* up */, 0 /* down */, t.cursorX /* left */, 0 /* right */)
+	t.cursorX = 0
+	t.clearLineToRight()
+
+	for t.cursorY > 0 {
+		t.move(1 /* up */, 0, 0, 0)
+		t.cursorY--
+		t.clearLineToRight()
+	}
+
+	if _, err = t.c.Write(t.outBuf); err != nil {
+		return
+	}
+	t.outBuf = t.outBuf[:0]
+
+	if n, err = writeWithCRLF(t.c, buf); err != nil {
+		return
+	}
+
+	t.writeLine(t.prompt)
+	if t.echo {
+		t.writeLine(t.line)
+	}
+
+	t.moveCursorToPos(t.pos)
+
+	if _, err = t.c.Write(t.outBuf); err != nil {
+		return
+	}
+	t.outBuf = t.outBuf[:0]
+	return
+}
+
+// ReadPassword temporarily changes the prompt and reads a password, without
+// echo, from the terminal.
+func (t *Terminal) ReadPassword(prompt string) (line string, err error) {
+	t.lock.Lock()
+	defer t.lock.Unlock()
+
+	oldPrompt := t.prompt
+	t.prompt = []rune(prompt)
+	t.echo = false
+
+	line, err = t.readLine()
+
+	t.prompt = oldPrompt
+	t.echo = true
+
+	return
+}
+
+// ReadLine returns a line of input from the terminal.
+func (t *Terminal) ReadLine() (line string, err error) {
+	t.lock.Lock()
+	defer t.lock.Unlock()
+
+	return t.readLine()
+}
+
+func (t *Terminal) readLine() (line string, err error) {
+	// t.lock must be held at this point
+
+	if t.cursorX == 0 && t.cursorY == 0 {
+		t.writeLine(t.prompt)
+		t.c.Write(t.outBuf)
+		t.outBuf = t.outBuf[:0]
+	}
+
+	lineIsPasted := t.pasteActive
+
+	for {
+		rest := t.remainder
+		lineOk := false
+		for !lineOk {
+			var key rune
+			key, rest = bytesToKey(rest, t.pasteActive)
+			if key == utf8.RuneError {
+				break
+			}
+			if !t.pasteActive {
+				if key == keyCtrlD {
+					if len(t.line) == 0 {
+						return "", io.EOF
+					}
+				}
+				if key == keyPasteStart {
+					t.pasteActive = true
+					if len(t.line) == 0 {
+						lineIsPasted = true
+					}
+					continue
+				}
+			} else if key == keyPasteEnd {
+				t.pasteActive = false
+				continue
+			}
+			if !t.pasteActive {
+				lineIsPasted = false
+			}
+			line, lineOk = t.handleKey(key)
+		}
+		if len(rest) > 0 {
+			n := copy(t.inBuf[:], rest)
+			t.remainder = t.inBuf[:n]
+		} else {
+			t.remainder = nil
+		}
+		t.c.Write(t.outBuf)
+		t.outBuf = t.outBuf[:0]
+		if lineOk {
+			if t.echo {
+				t.historyIndex = -1
+				t.history.Add(line)
+			}
+			if lineIsPasted {
+				err = ErrPasteIndicator
+			}
+			return
+		}
+
+		// t.remainder is a slice at the beginning of t.inBuf
+		// containing a partial key sequence
+		readBuf := t.inBuf[len(t.remainder):]
+		var n int
+
+		t.lock.Unlock()
+		n, err = t.c.Read(readBuf)
+		t.lock.Lock()
+
+		if err != nil {
+			return
+		}
+
+		t.remainder = t.inBuf[:n+len(t.remainder)]
+	}
+}
+
+// SetPrompt sets the prompt to be used when reading subsequent lines.
+func (t *Terminal) SetPrompt(prompt string) {
+	t.lock.Lock()
+	defer t.lock.Unlock()
+
+	t.prompt = []rune(prompt)
+}
+
+func (t *Terminal) clearAndRepaintLinePlusNPrevious(numPrevLines int) {
+	// Move cursor to column zero at the start of the line.
+	t.move(t.cursorY, 0, t.cursorX, 0)
+	t.cursorX, t.cursorY = 0, 0
+	t.clearLineToRight()
+	for t.cursorY < numPrevLines {
+		// Move down a line
+		t.move(0, 1, 0, 0)
+		t.cursorY++
+		t.clearLineToRight()
+	}
+	// Move back to beginning.
+	t.move(t.cursorY, 0, 0, 0)
+	t.cursorX, t.cursorY = 0, 0
+
+	t.queue(t.prompt)
+	t.advanceCursor(visualLength(t.prompt))
+	t.writeLine(t.line)
+	t.moveCursorToPos(t.pos)
+}
+
+func (t *Terminal) SetSize(width, height int) error {
+	t.lock.Lock()
+	defer t.lock.Unlock()
+
+	if width == 0 {
+		width = 1
+	}
+
+	oldWidth := t.termWidth
+	t.termWidth, t.termHeight = width, height
+
+	switch {
+	case width == oldWidth:
+		// If the width didn't change then nothing else needs to be
+		// done.
+		return nil
+	case len(t.line) == 0 && t.cursorX == 0 && t.cursorY == 0:
+		// If there is nothing on current line and no prompt printed,
+		// just do nothing
+		return nil
+	case width < oldWidth:
+		// Some terminals (e.g. xterm) will truncate lines that were
+		// too long when shinking. Others, (e.g. gnome-terminal) will
+		// attempt to wrap them. For the former, repainting t.maxLine
+		// works great, but that behaviour goes badly wrong in the case
+		// of the latter because they have doubled every full line.
+
+		// We assume that we are working on a terminal that wraps lines
+		// and adjust the cursor position based on every previous line
+		// wrapping and turning into two. This causes the prompt on
+		// xterms to move upwards, which isn't great, but it avoids a
+		// huge mess with gnome-terminal.
+		if t.cursorX >= t.termWidth {
+			t.cursorX = t.termWidth - 1
+		}
+		t.cursorY *= 2
+		t.clearAndRepaintLinePlusNPrevious(t.maxLine * 2)
+	case width > oldWidth:
+		// If the terminal expands then our position calculations will
+		// be wrong in the future because we think the cursor is
+		// |t.pos| chars into the string, but there will be a gap at
+		// the end of any wrapped line.
+		//
+		// But the position will actually be correct until we move, so
+		// we can move back to the beginning and repaint everything.
+		t.clearAndRepaintLinePlusNPrevious(t.maxLine)
+	}
+
+	_, err := t.c.Write(t.outBuf)
+	t.outBuf = t.outBuf[:0]
+	return err
+}
+
+type pasteIndicatorError struct{}
+
+func (pasteIndicatorError) Error() string {
+	return "terminal: ErrPasteIndicator not correctly handled"
+}
+
+// ErrPasteIndicator may be returned from ReadLine as the error, in addition
+// to valid line data. It indicates that bracketed paste mode is enabled and
+// that the returned line consists only of pasted data. Programs may wish to
+// interpret pasted data more literally than typed data.
+var ErrPasteIndicator = pasteIndicatorError{}
+
+// SetBracketedPasteMode requests that the terminal bracket paste operations
+// with markers. Not all terminals support this but, if it is supported, then
+// enabling this mode will stop any autocomplete callback from running due to
+// pastes. Additionally, any lines that are completely pasted will be returned
+// from ReadLine with the error set to ErrPasteIndicator.
+func (t *Terminal) SetBracketedPasteMode(on bool) {
+	if on {
+		io.WriteString(t.c, "\x1b[?2004h")
+	} else {
+		io.WriteString(t.c, "\x1b[?2004l")
+	}
+}
+
+// stRingBuffer is a ring buffer of strings.
+type stRingBuffer struct {
+	// entries contains max elements.
+	entries []string
+	max     int
+	// head contains the index of the element most recently added to the ring.
+	head int
+	// size contains the number of elements in the ring.
+	size int
+}
+
+func (s *stRingBuffer) Add(a string) {
+	if s.entries == nil {
+		const defaultNumEntries = 100
+		s.entries = make([]string, defaultNumEntries)
+		s.max = defaultNumEntries
+	}
+
+	s.head = (s.head + 1) % s.max
+	s.entries[s.head] = a
+	if s.size < s.max {
+		s.size++
+	}
+}
+
+// NthPreviousEntry returns the value passed to the nth previous call to Add.
+// If n is zero then the immediately prior value is returned, if one, then the
+// next most recent, and so on. If such an element doesn't exist then ok is
+// false.
+func (s *stRingBuffer) NthPreviousEntry(n int) (value string, ok bool) {
+	if n >= s.size {
+		return "", false
+	}
+	index := s.head - n
+	if index < 0 {
+		index += s.max
+	}
+	return s.entries[index], true
+}
+
+// readPasswordLine reads from reader until it finds \n or io.EOF.
+// The slice returned does not include the \n.
+// readPasswordLine also ignores any \r it finds.
+func readPasswordLine(reader io.Reader) ([]byte, error) {
+	var buf [1]byte
+	var ret []byte
+
+	for {
+		n, err := reader.Read(buf[:])
+		if n > 0 {
+			switch buf[0] {
+			case '\n':
+				return ret, nil
+			case '\r':
+				// remove \r from passwords on Windows
+			default:
+				ret = append(ret, buf[0])
+			}
+			continue
+		}
+		if err != nil {
+			if err == io.EOF && len(ret) > 0 {
+				return ret, nil
+			}
+			return ret, err
+		}
+	}
+}
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util.go b/vendor/golang.org/x/crypto/ssh/terminal/util.go
new file mode 100644
index 0000000..3911040
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util.go
@@ -0,0 +1,114 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix darwin dragonfly freebsd linux,!appengine netbsd openbsd
+
+// Package terminal provides support functions for dealing with terminals, as
+// commonly found on UNIX systems.
+//
+// Putting a terminal into raw mode is the most common requirement:
+//
+// 	oldState, err := terminal.MakeRaw(0)
+// 	if err != nil {
+// 	        panic(err)
+// 	}
+// 	defer terminal.Restore(0, oldState)
+package terminal // import "golang.org/x/crypto/ssh/terminal"
+
+import (
+	"golang.org/x/sys/unix"
+)
+
+// State contains the state of a terminal.
+type State struct {
+	termios unix.Termios
+}
+
+// IsTerminal returns whether the given file descriptor is a terminal.
+func IsTerminal(fd int) bool {
+	_, err := unix.IoctlGetTermios(fd, ioctlReadTermios)
+	return err == nil
+}
+
+// MakeRaw put the terminal connected to the given file descriptor into raw
+// mode and returns the previous state of the terminal so that it can be
+// restored.
+func MakeRaw(fd int) (*State, error) {
+	termios, err := unix.IoctlGetTermios(fd, ioctlReadTermios)
+	if err != nil {
+		return nil, err
+	}
+
+	oldState := State{termios: *termios}
+
+	// This attempts to replicate the behaviour documented for cfmakeraw in
+	// the termios(3) manpage.
+	termios.Iflag &^= unix.IGNBRK | unix.BRKINT | unix.PARMRK | unix.ISTRIP | unix.INLCR | unix.IGNCR | unix.ICRNL | unix.IXON
+	termios.Oflag &^= unix.OPOST
+	termios.Lflag &^= unix.ECHO | unix.ECHONL | unix.ICANON | unix.ISIG | unix.IEXTEN
+	termios.Cflag &^= unix.CSIZE | unix.PARENB
+	termios.Cflag |= unix.CS8
+	termios.Cc[unix.VMIN] = 1
+	termios.Cc[unix.VTIME] = 0
+	if err := unix.IoctlSetTermios(fd, ioctlWriteTermios, termios); err != nil {
+		return nil, err
+	}
+
+	return &oldState, nil
+}
+
+// GetState returns the current state of a terminal which may be useful to
+// restore the terminal after a signal.
+func GetState(fd int) (*State, error) {
+	termios, err := unix.IoctlGetTermios(fd, ioctlReadTermios)
+	if err != nil {
+		return nil, err
+	}
+
+	return &State{termios: *termios}, nil
+}
+
+// Restore restores the terminal connected to the given file descriptor to a
+// previous state.
+func Restore(fd int, state *State) error {
+	return unix.IoctlSetTermios(fd, ioctlWriteTermios, &state.termios)
+}
+
+// GetSize returns the dimensions of the given terminal.
+func GetSize(fd int) (width, height int, err error) {
+	ws, err := unix.IoctlGetWinsize(fd, unix.TIOCGWINSZ)
+	if err != nil {
+		return -1, -1, err
+	}
+	return int(ws.Col), int(ws.Row), nil
+}
+
+// passwordReader is an io.Reader that reads from a specific file descriptor.
+type passwordReader int
+
+func (r passwordReader) Read(buf []byte) (int, error) {
+	return unix.Read(int(r), buf)
+}
+
+// ReadPassword reads a line of input from a terminal without local echo.  This
+// is commonly used for inputting passwords and other sensitive data. The slice
+// returned does not include the \n.
+func ReadPassword(fd int) ([]byte, error) {
+	termios, err := unix.IoctlGetTermios(fd, ioctlReadTermios)
+	if err != nil {
+		return nil, err
+	}
+
+	newState := *termios
+	newState.Lflag &^= unix.ECHO
+	newState.Lflag |= unix.ICANON | unix.ISIG
+	newState.Iflag |= unix.ICRNL
+	if err := unix.IoctlSetTermios(fd, ioctlWriteTermios, &newState); err != nil {
+		return nil, err
+	}
+
+	defer unix.IoctlSetTermios(fd, ioctlWriteTermios, termios)
+
+	return readPasswordLine(passwordReader(fd))
+}
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util_aix.go b/vendor/golang.org/x/crypto/ssh/terminal/util_aix.go
new file mode 100644
index 0000000..dfcd627
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util_aix.go
@@ -0,0 +1,12 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix
+
+package terminal
+
+import "golang.org/x/sys/unix"
+
+const ioctlReadTermios = unix.TCGETS
+const ioctlWriteTermios = unix.TCSETS
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util_bsd.go b/vendor/golang.org/x/crypto/ssh/terminal/util_bsd.go
new file mode 100644
index 0000000..cb23a59
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util_bsd.go
@@ -0,0 +1,12 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build darwin dragonfly freebsd netbsd openbsd
+
+package terminal
+
+import "golang.org/x/sys/unix"
+
+const ioctlReadTermios = unix.TIOCGETA
+const ioctlWriteTermios = unix.TIOCSETA
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util_linux.go b/vendor/golang.org/x/crypto/ssh/terminal/util_linux.go
new file mode 100644
index 0000000..5fadfe8
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util_linux.go
@@ -0,0 +1,10 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package terminal
+
+import "golang.org/x/sys/unix"
+
+const ioctlReadTermios = unix.TCGETS
+const ioctlWriteTermios = unix.TCSETS
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util_plan9.go b/vendor/golang.org/x/crypto/ssh/terminal/util_plan9.go
new file mode 100644
index 0000000..9317ac7
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util_plan9.go
@@ -0,0 +1,58 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package terminal provides support functions for dealing with terminals, as
+// commonly found on UNIX systems.
+//
+// Putting a terminal into raw mode is the most common requirement:
+//
+// 	oldState, err := terminal.MakeRaw(0)
+// 	if err != nil {
+// 	        panic(err)
+// 	}
+// 	defer terminal.Restore(0, oldState)
+package terminal
+
+import (
+	"fmt"
+	"runtime"
+)
+
+type State struct{}
+
+// IsTerminal returns whether the given file descriptor is a terminal.
+func IsTerminal(fd int) bool {
+	return false
+}
+
+// MakeRaw put the terminal connected to the given file descriptor into raw
+// mode and returns the previous state of the terminal so that it can be
+// restored.
+func MakeRaw(fd int) (*State, error) {
+	return nil, fmt.Errorf("terminal: MakeRaw not implemented on %s/%s", runtime.GOOS, runtime.GOARCH)
+}
+
+// GetState returns the current state of a terminal which may be useful to
+// restore the terminal after a signal.
+func GetState(fd int) (*State, error) {
+	return nil, fmt.Errorf("terminal: GetState not implemented on %s/%s", runtime.GOOS, runtime.GOARCH)
+}
+
+// Restore restores the terminal connected to the given file descriptor to a
+// previous state.
+func Restore(fd int, state *State) error {
+	return fmt.Errorf("terminal: Restore not implemented on %s/%s", runtime.GOOS, runtime.GOARCH)
+}
+
+// GetSize returns the dimensions of the given terminal.
+func GetSize(fd int) (width, height int, err error) {
+	return 0, 0, fmt.Errorf("terminal: GetSize not implemented on %s/%s", runtime.GOOS, runtime.GOARCH)
+}
+
+// ReadPassword reads a line of input from a terminal without local echo.  This
+// is commonly used for inputting passwords and other sensitive data. The slice
+// returned does not include the \n.
+func ReadPassword(fd int) ([]byte, error) {
+	return nil, fmt.Errorf("terminal: ReadPassword not implemented on %s/%s", runtime.GOOS, runtime.GOARCH)
+}
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util_solaris.go b/vendor/golang.org/x/crypto/ssh/terminal/util_solaris.go
new file mode 100644
index 0000000..3d5f06a
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util_solaris.go
@@ -0,0 +1,124 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build solaris
+
+package terminal // import "golang.org/x/crypto/ssh/terminal"
+
+import (
+	"golang.org/x/sys/unix"
+	"io"
+	"syscall"
+)
+
+// State contains the state of a terminal.
+type State struct {
+	termios unix.Termios
+}
+
+// IsTerminal returns whether the given file descriptor is a terminal.
+func IsTerminal(fd int) bool {
+	_, err := unix.IoctlGetTermio(fd, unix.TCGETA)
+	return err == nil
+}
+
+// ReadPassword reads a line of input from a terminal without local echo.  This
+// is commonly used for inputting passwords and other sensitive data. The slice
+// returned does not include the \n.
+func ReadPassword(fd int) ([]byte, error) {
+	// see also: http://src.illumos.org/source/xref/illumos-gate/usr/src/lib/libast/common/uwin/getpass.c
+	val, err := unix.IoctlGetTermios(fd, unix.TCGETS)
+	if err != nil {
+		return nil, err
+	}
+	oldState := *val
+
+	newState := oldState
+	newState.Lflag &^= syscall.ECHO
+	newState.Lflag |= syscall.ICANON | syscall.ISIG
+	newState.Iflag |= syscall.ICRNL
+	err = unix.IoctlSetTermios(fd, unix.TCSETS, &newState)
+	if err != nil {
+		return nil, err
+	}
+
+	defer unix.IoctlSetTermios(fd, unix.TCSETS, &oldState)
+
+	var buf [16]byte
+	var ret []byte
+	for {
+		n, err := syscall.Read(fd, buf[:])
+		if err != nil {
+			return nil, err
+		}
+		if n == 0 {
+			if len(ret) == 0 {
+				return nil, io.EOF
+			}
+			break
+		}
+		if buf[n-1] == '\n' {
+			n--
+		}
+		ret = append(ret, buf[:n]...)
+		if n < len(buf) {
+			break
+		}
+	}
+
+	return ret, nil
+}
+
+// MakeRaw puts the terminal connected to the given file descriptor into raw
+// mode and returns the previous state of the terminal so that it can be
+// restored.
+// see http://cr.illumos.org/~webrev/andy_js/1060/
+func MakeRaw(fd int) (*State, error) {
+	termios, err := unix.IoctlGetTermios(fd, unix.TCGETS)
+	if err != nil {
+		return nil, err
+	}
+
+	oldState := State{termios: *termios}
+
+	termios.Iflag &^= unix.IGNBRK | unix.BRKINT | unix.PARMRK | unix.ISTRIP | unix.INLCR | unix.IGNCR | unix.ICRNL | unix.IXON
+	termios.Oflag &^= unix.OPOST
+	termios.Lflag &^= unix.ECHO | unix.ECHONL | unix.ICANON | unix.ISIG | unix.IEXTEN
+	termios.Cflag &^= unix.CSIZE | unix.PARENB
+	termios.Cflag |= unix.CS8
+	termios.Cc[unix.VMIN] = 1
+	termios.Cc[unix.VTIME] = 0
+
+	if err := unix.IoctlSetTermios(fd, unix.TCSETS, termios); err != nil {
+		return nil, err
+	}
+
+	return &oldState, nil
+}
+
+// Restore restores the terminal connected to the given file descriptor to a
+// previous state.
+func Restore(fd int, oldState *State) error {
+	return unix.IoctlSetTermios(fd, unix.TCSETS, &oldState.termios)
+}
+
+// GetState returns the current state of a terminal which may be useful to
+// restore the terminal after a signal.
+func GetState(fd int) (*State, error) {
+	termios, err := unix.IoctlGetTermios(fd, unix.TCGETS)
+	if err != nil {
+		return nil, err
+	}
+
+	return &State{termios: *termios}, nil
+}
+
+// GetSize returns the dimensions of the given terminal.
+func GetSize(fd int) (width, height int, err error) {
+	ws, err := unix.IoctlGetWinsize(fd, unix.TIOCGWINSZ)
+	if err != nil {
+		return 0, 0, err
+	}
+	return int(ws.Col), int(ws.Row), nil
+}
diff --git a/vendor/golang.org/x/crypto/ssh/terminal/util_windows.go b/vendor/golang.org/x/crypto/ssh/terminal/util_windows.go
new file mode 100644
index 0000000..5cfdf8f
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/terminal/util_windows.go
@@ -0,0 +1,105 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build windows
+
+// Package terminal provides support functions for dealing with terminals, as
+// commonly found on UNIX systems.
+//
+// Putting a terminal into raw mode is the most common requirement:
+//
+// 	oldState, err := terminal.MakeRaw(0)
+// 	if err != nil {
+// 	        panic(err)
+// 	}
+// 	defer terminal.Restore(0, oldState)
+package terminal
+
+import (
+	"os"
+
+	"golang.org/x/sys/windows"
+)
+
+type State struct {
+	mode uint32
+}
+
+// IsTerminal returns whether the given file descriptor is a terminal.
+func IsTerminal(fd int) bool {
+	var st uint32
+	err := windows.GetConsoleMode(windows.Handle(fd), &st)
+	return err == nil
+}
+
+// MakeRaw put the terminal connected to the given file descriptor into raw
+// mode and returns the previous state of the terminal so that it can be
+// restored.
+func MakeRaw(fd int) (*State, error) {
+	var st uint32
+	if err := windows.GetConsoleMode(windows.Handle(fd), &st); err != nil {
+		return nil, err
+	}
+	raw := st &^ (windows.ENABLE_ECHO_INPUT | windows.ENABLE_PROCESSED_INPUT | windows.ENABLE_LINE_INPUT | windows.ENABLE_PROCESSED_OUTPUT)
+	if err := windows.SetConsoleMode(windows.Handle(fd), raw); err != nil {
+		return nil, err
+	}
+	return &State{st}, nil
+}
+
+// GetState returns the current state of a terminal which may be useful to
+// restore the terminal after a signal.
+func GetState(fd int) (*State, error) {
+	var st uint32
+	if err := windows.GetConsoleMode(windows.Handle(fd), &st); err != nil {
+		return nil, err
+	}
+	return &State{st}, nil
+}
+
+// Restore restores the terminal connected to the given file descriptor to a
+// previous state.
+func Restore(fd int, state *State) error {
+	return windows.SetConsoleMode(windows.Handle(fd), state.mode)
+}
+
+// GetSize returns the visible dimensions of the given terminal.
+//
+// These dimensions don't include any scrollback buffer height.
+func GetSize(fd int) (width, height int, err error) {
+	var info windows.ConsoleScreenBufferInfo
+	if err := windows.GetConsoleScreenBufferInfo(windows.Handle(fd), &info); err != nil {
+		return 0, 0, err
+	}
+	return int(info.Window.Right - info.Window.Left + 1), int(info.Window.Bottom - info.Window.Top + 1), nil
+}
+
+// ReadPassword reads a line of input from a terminal without local echo.  This
+// is commonly used for inputting passwords and other sensitive data. The slice
+// returned does not include the \n.
+func ReadPassword(fd int) ([]byte, error) {
+	var st uint32
+	if err := windows.GetConsoleMode(windows.Handle(fd), &st); err != nil {
+		return nil, err
+	}
+	old := st
+
+	st &^= (windows.ENABLE_ECHO_INPUT)
+	st |= (windows.ENABLE_PROCESSED_INPUT | windows.ENABLE_LINE_INPUT | windows.ENABLE_PROCESSED_OUTPUT)
+	if err := windows.SetConsoleMode(windows.Handle(fd), st); err != nil {
+		return nil, err
+	}
+
+	defer windows.SetConsoleMode(windows.Handle(fd), old)
+
+	var h windows.Handle
+	p, _ := windows.GetCurrentProcess()
+	if err := windows.DuplicateHandle(p, windows.Handle(fd), p, &h, 0, false, windows.DUPLICATE_SAME_ACCESS); err != nil {
+		return nil, err
+	}
+
+	f := os.NewFile(uintptr(h), "stdin")
+	defer f.Close()
+	return readPasswordLine(f)
+}