[VOL-1386] This commit add "dep" as the package management tool
for voltha-go.
Change-Id: I52bc4911dd00a441756ec7c30f46d45091f3f90e
diff --git a/vendor/golang.org/x/net/http2/.gitignore b/vendor/golang.org/x/net/http2/.gitignore
new file mode 100644
index 0000000..190f122
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/.gitignore
@@ -0,0 +1,2 @@
+*~
+h2i/h2i
diff --git a/vendor/golang.org/x/net/http2/Dockerfile b/vendor/golang.org/x/net/http2/Dockerfile
new file mode 100644
index 0000000..53fc525
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/Dockerfile
@@ -0,0 +1,51 @@
+#
+# This Dockerfile builds a recent curl with HTTP/2 client support, using
+# a recent nghttp2 build.
+#
+# See the Makefile for how to tag it. If Docker and that image is found, the
+# Go tests use this curl binary for integration tests.
+#
+
+FROM ubuntu:trusty
+
+RUN apt-get update && \
+ apt-get upgrade -y && \
+ apt-get install -y git-core build-essential wget
+
+RUN apt-get install -y --no-install-recommends \
+ autotools-dev libtool pkg-config zlib1g-dev \
+ libcunit1-dev libssl-dev libxml2-dev libevent-dev \
+ automake autoconf
+
+# The list of packages nghttp2 recommends for h2load:
+RUN apt-get install -y --no-install-recommends make binutils \
+ autoconf automake autotools-dev \
+ libtool pkg-config zlib1g-dev libcunit1-dev libssl-dev libxml2-dev \
+ libev-dev libevent-dev libjansson-dev libjemalloc-dev \
+ cython python3.4-dev python-setuptools
+
+# Note: setting NGHTTP2_VER before the git clone, so an old git clone isn't cached:
+ENV NGHTTP2_VER 895da9a
+RUN cd /root && git clone https://github.com/tatsuhiro-t/nghttp2.git
+
+WORKDIR /root/nghttp2
+RUN git reset --hard $NGHTTP2_VER
+RUN autoreconf -i
+RUN automake
+RUN autoconf
+RUN ./configure
+RUN make
+RUN make install
+
+WORKDIR /root
+RUN wget http://curl.haxx.se/download/curl-7.45.0.tar.gz
+RUN tar -zxvf curl-7.45.0.tar.gz
+WORKDIR /root/curl-7.45.0
+RUN ./configure --with-ssl --with-nghttp2=/usr/local
+RUN make
+RUN make install
+RUN ldconfig
+
+CMD ["-h"]
+ENTRYPOINT ["/usr/local/bin/curl"]
+
diff --git a/vendor/golang.org/x/net/http2/Makefile b/vendor/golang.org/x/net/http2/Makefile
new file mode 100644
index 0000000..55fd826
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/Makefile
@@ -0,0 +1,3 @@
+curlimage:
+ docker build -t gohttp2/curl .
+
diff --git a/vendor/golang.org/x/net/http2/README b/vendor/golang.org/x/net/http2/README
new file mode 100644
index 0000000..360d5aa
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/README
@@ -0,0 +1,20 @@
+This is a work-in-progress HTTP/2 implementation for Go.
+
+It will eventually live in the Go standard library and won't require
+any changes to your code to use. It will just be automatic.
+
+Status:
+
+* The server support is pretty good. A few things are missing
+ but are being worked on.
+* The client work has just started but shares a lot of code
+ is coming along much quicker.
+
+Docs are at https://godoc.org/golang.org/x/net/http2
+
+Demo test server at https://http2.golang.org/
+
+Help & bug reports welcome!
+
+Contributing: https://golang.org/doc/contribute.html
+Bugs: https://golang.org/issue/new?title=x/net/http2:+
diff --git a/vendor/golang.org/x/net/http2/ciphers.go b/vendor/golang.org/x/net/http2/ciphers.go
new file mode 100644
index 0000000..c9a0cf3
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/ciphers.go
@@ -0,0 +1,641 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+// A list of the possible cipher suite ids. Taken from
+// https://www.iana.org/assignments/tls-parameters/tls-parameters.txt
+
+const (
+ cipher_TLS_NULL_WITH_NULL_NULL uint16 = 0x0000
+ cipher_TLS_RSA_WITH_NULL_MD5 uint16 = 0x0001
+ cipher_TLS_RSA_WITH_NULL_SHA uint16 = 0x0002
+ cipher_TLS_RSA_EXPORT_WITH_RC4_40_MD5 uint16 = 0x0003
+ cipher_TLS_RSA_WITH_RC4_128_MD5 uint16 = 0x0004
+ cipher_TLS_RSA_WITH_RC4_128_SHA uint16 = 0x0005
+ cipher_TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 uint16 = 0x0006
+ cipher_TLS_RSA_WITH_IDEA_CBC_SHA uint16 = 0x0007
+ cipher_TLS_RSA_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0008
+ cipher_TLS_RSA_WITH_DES_CBC_SHA uint16 = 0x0009
+ cipher_TLS_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0x000A
+ cipher_TLS_DH_DSS_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x000B
+ cipher_TLS_DH_DSS_WITH_DES_CBC_SHA uint16 = 0x000C
+ cipher_TLS_DH_DSS_WITH_3DES_EDE_CBC_SHA uint16 = 0x000D
+ cipher_TLS_DH_RSA_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x000E
+ cipher_TLS_DH_RSA_WITH_DES_CBC_SHA uint16 = 0x000F
+ cipher_TLS_DH_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0x0010
+ cipher_TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0011
+ cipher_TLS_DHE_DSS_WITH_DES_CBC_SHA uint16 = 0x0012
+ cipher_TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA uint16 = 0x0013
+ cipher_TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0014
+ cipher_TLS_DHE_RSA_WITH_DES_CBC_SHA uint16 = 0x0015
+ cipher_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0x0016
+ cipher_TLS_DH_anon_EXPORT_WITH_RC4_40_MD5 uint16 = 0x0017
+ cipher_TLS_DH_anon_WITH_RC4_128_MD5 uint16 = 0x0018
+ cipher_TLS_DH_anon_EXPORT_WITH_DES40_CBC_SHA uint16 = 0x0019
+ cipher_TLS_DH_anon_WITH_DES_CBC_SHA uint16 = 0x001A
+ cipher_TLS_DH_anon_WITH_3DES_EDE_CBC_SHA uint16 = 0x001B
+ // Reserved uint16 = 0x001C-1D
+ cipher_TLS_KRB5_WITH_DES_CBC_SHA uint16 = 0x001E
+ cipher_TLS_KRB5_WITH_3DES_EDE_CBC_SHA uint16 = 0x001F
+ cipher_TLS_KRB5_WITH_RC4_128_SHA uint16 = 0x0020
+ cipher_TLS_KRB5_WITH_IDEA_CBC_SHA uint16 = 0x0021
+ cipher_TLS_KRB5_WITH_DES_CBC_MD5 uint16 = 0x0022
+ cipher_TLS_KRB5_WITH_3DES_EDE_CBC_MD5 uint16 = 0x0023
+ cipher_TLS_KRB5_WITH_RC4_128_MD5 uint16 = 0x0024
+ cipher_TLS_KRB5_WITH_IDEA_CBC_MD5 uint16 = 0x0025
+ cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA uint16 = 0x0026
+ cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_SHA uint16 = 0x0027
+ cipher_TLS_KRB5_EXPORT_WITH_RC4_40_SHA uint16 = 0x0028
+ cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5 uint16 = 0x0029
+ cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_MD5 uint16 = 0x002A
+ cipher_TLS_KRB5_EXPORT_WITH_RC4_40_MD5 uint16 = 0x002B
+ cipher_TLS_PSK_WITH_NULL_SHA uint16 = 0x002C
+ cipher_TLS_DHE_PSK_WITH_NULL_SHA uint16 = 0x002D
+ cipher_TLS_RSA_PSK_WITH_NULL_SHA uint16 = 0x002E
+ cipher_TLS_RSA_WITH_AES_128_CBC_SHA uint16 = 0x002F
+ cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA uint16 = 0x0030
+ cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA uint16 = 0x0031
+ cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA uint16 = 0x0032
+ cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA uint16 = 0x0033
+ cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA uint16 = 0x0034
+ cipher_TLS_RSA_WITH_AES_256_CBC_SHA uint16 = 0x0035
+ cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA uint16 = 0x0036
+ cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA uint16 = 0x0037
+ cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA uint16 = 0x0038
+ cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA uint16 = 0x0039
+ cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA uint16 = 0x003A
+ cipher_TLS_RSA_WITH_NULL_SHA256 uint16 = 0x003B
+ cipher_TLS_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0x003C
+ cipher_TLS_RSA_WITH_AES_256_CBC_SHA256 uint16 = 0x003D
+ cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA256 uint16 = 0x003E
+ cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0x003F
+ cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA256 uint16 = 0x0040
+ cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0041
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0042
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0043
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0044
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0045
+ cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA uint16 = 0x0046
+ // Reserved uint16 = 0x0047-4F
+ // Reserved uint16 = 0x0050-58
+ // Reserved uint16 = 0x0059-5C
+ // Unassigned uint16 = 0x005D-5F
+ // Reserved uint16 = 0x0060-66
+ cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0x0067
+ cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA256 uint16 = 0x0068
+ cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA256 uint16 = 0x0069
+ cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA256 uint16 = 0x006A
+ cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 uint16 = 0x006B
+ cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA256 uint16 = 0x006C
+ cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA256 uint16 = 0x006D
+ // Unassigned uint16 = 0x006E-83
+ cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA uint16 = 0x0084
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA uint16 = 0x0085
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA uint16 = 0x0086
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA uint16 = 0x0087
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA uint16 = 0x0088
+ cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA uint16 = 0x0089
+ cipher_TLS_PSK_WITH_RC4_128_SHA uint16 = 0x008A
+ cipher_TLS_PSK_WITH_3DES_EDE_CBC_SHA uint16 = 0x008B
+ cipher_TLS_PSK_WITH_AES_128_CBC_SHA uint16 = 0x008C
+ cipher_TLS_PSK_WITH_AES_256_CBC_SHA uint16 = 0x008D
+ cipher_TLS_DHE_PSK_WITH_RC4_128_SHA uint16 = 0x008E
+ cipher_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA uint16 = 0x008F
+ cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA uint16 = 0x0090
+ cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA uint16 = 0x0091
+ cipher_TLS_RSA_PSK_WITH_RC4_128_SHA uint16 = 0x0092
+ cipher_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA uint16 = 0x0093
+ cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA uint16 = 0x0094
+ cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA uint16 = 0x0095
+ cipher_TLS_RSA_WITH_SEED_CBC_SHA uint16 = 0x0096
+ cipher_TLS_DH_DSS_WITH_SEED_CBC_SHA uint16 = 0x0097
+ cipher_TLS_DH_RSA_WITH_SEED_CBC_SHA uint16 = 0x0098
+ cipher_TLS_DHE_DSS_WITH_SEED_CBC_SHA uint16 = 0x0099
+ cipher_TLS_DHE_RSA_WITH_SEED_CBC_SHA uint16 = 0x009A
+ cipher_TLS_DH_anon_WITH_SEED_CBC_SHA uint16 = 0x009B
+ cipher_TLS_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0x009C
+ cipher_TLS_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0x009D
+ cipher_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0x009E
+ cipher_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0x009F
+ cipher_TLS_DH_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0x00A0
+ cipher_TLS_DH_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0x00A1
+ cipher_TLS_DHE_DSS_WITH_AES_128_GCM_SHA256 uint16 = 0x00A2
+ cipher_TLS_DHE_DSS_WITH_AES_256_GCM_SHA384 uint16 = 0x00A3
+ cipher_TLS_DH_DSS_WITH_AES_128_GCM_SHA256 uint16 = 0x00A4
+ cipher_TLS_DH_DSS_WITH_AES_256_GCM_SHA384 uint16 = 0x00A5
+ cipher_TLS_DH_anon_WITH_AES_128_GCM_SHA256 uint16 = 0x00A6
+ cipher_TLS_DH_anon_WITH_AES_256_GCM_SHA384 uint16 = 0x00A7
+ cipher_TLS_PSK_WITH_AES_128_GCM_SHA256 uint16 = 0x00A8
+ cipher_TLS_PSK_WITH_AES_256_GCM_SHA384 uint16 = 0x00A9
+ cipher_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 uint16 = 0x00AA
+ cipher_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 uint16 = 0x00AB
+ cipher_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 uint16 = 0x00AC
+ cipher_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 uint16 = 0x00AD
+ cipher_TLS_PSK_WITH_AES_128_CBC_SHA256 uint16 = 0x00AE
+ cipher_TLS_PSK_WITH_AES_256_CBC_SHA384 uint16 = 0x00AF
+ cipher_TLS_PSK_WITH_NULL_SHA256 uint16 = 0x00B0
+ cipher_TLS_PSK_WITH_NULL_SHA384 uint16 = 0x00B1
+ cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 uint16 = 0x00B2
+ cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 uint16 = 0x00B3
+ cipher_TLS_DHE_PSK_WITH_NULL_SHA256 uint16 = 0x00B4
+ cipher_TLS_DHE_PSK_WITH_NULL_SHA384 uint16 = 0x00B5
+ cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 uint16 = 0x00B6
+ cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 uint16 = 0x00B7
+ cipher_TLS_RSA_PSK_WITH_NULL_SHA256 uint16 = 0x00B8
+ cipher_TLS_RSA_PSK_WITH_NULL_SHA384 uint16 = 0x00B9
+ cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BA
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BB
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BC
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BD
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BE
+ cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0x00BF
+ cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C0
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C1
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C2
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C3
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C4
+ cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA256 uint16 = 0x00C5
+ // Unassigned uint16 = 0x00C6-FE
+ cipher_TLS_EMPTY_RENEGOTIATION_INFO_SCSV uint16 = 0x00FF
+ // Unassigned uint16 = 0x01-55,*
+ cipher_TLS_FALLBACK_SCSV uint16 = 0x5600
+ // Unassigned uint16 = 0x5601 - 0xC000
+ cipher_TLS_ECDH_ECDSA_WITH_NULL_SHA uint16 = 0xC001
+ cipher_TLS_ECDH_ECDSA_WITH_RC4_128_SHA uint16 = 0xC002
+ cipher_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA uint16 = 0xC003
+ cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA uint16 = 0xC004
+ cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA uint16 = 0xC005
+ cipher_TLS_ECDHE_ECDSA_WITH_NULL_SHA uint16 = 0xC006
+ cipher_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA uint16 = 0xC007
+ cipher_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA uint16 = 0xC008
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA uint16 = 0xC009
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA uint16 = 0xC00A
+ cipher_TLS_ECDH_RSA_WITH_NULL_SHA uint16 = 0xC00B
+ cipher_TLS_ECDH_RSA_WITH_RC4_128_SHA uint16 = 0xC00C
+ cipher_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0xC00D
+ cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA uint16 = 0xC00E
+ cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA uint16 = 0xC00F
+ cipher_TLS_ECDHE_RSA_WITH_NULL_SHA uint16 = 0xC010
+ cipher_TLS_ECDHE_RSA_WITH_RC4_128_SHA uint16 = 0xC011
+ cipher_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0xC012
+ cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA uint16 = 0xC013
+ cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA uint16 = 0xC014
+ cipher_TLS_ECDH_anon_WITH_NULL_SHA uint16 = 0xC015
+ cipher_TLS_ECDH_anon_WITH_RC4_128_SHA uint16 = 0xC016
+ cipher_TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA uint16 = 0xC017
+ cipher_TLS_ECDH_anon_WITH_AES_128_CBC_SHA uint16 = 0xC018
+ cipher_TLS_ECDH_anon_WITH_AES_256_CBC_SHA uint16 = 0xC019
+ cipher_TLS_SRP_SHA_WITH_3DES_EDE_CBC_SHA uint16 = 0xC01A
+ cipher_TLS_SRP_SHA_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0xC01B
+ cipher_TLS_SRP_SHA_DSS_WITH_3DES_EDE_CBC_SHA uint16 = 0xC01C
+ cipher_TLS_SRP_SHA_WITH_AES_128_CBC_SHA uint16 = 0xC01D
+ cipher_TLS_SRP_SHA_RSA_WITH_AES_128_CBC_SHA uint16 = 0xC01E
+ cipher_TLS_SRP_SHA_DSS_WITH_AES_128_CBC_SHA uint16 = 0xC01F
+ cipher_TLS_SRP_SHA_WITH_AES_256_CBC_SHA uint16 = 0xC020
+ cipher_TLS_SRP_SHA_RSA_WITH_AES_256_CBC_SHA uint16 = 0xC021
+ cipher_TLS_SRP_SHA_DSS_WITH_AES_256_CBC_SHA uint16 = 0xC022
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 uint16 = 0xC023
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 uint16 = 0xC024
+ cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 uint16 = 0xC025
+ cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 uint16 = 0xC026
+ cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0xC027
+ cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 uint16 = 0xC028
+ cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0xC029
+ cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 uint16 = 0xC02A
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 uint16 = 0xC02B
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 uint16 = 0xC02C
+ cipher_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 uint16 = 0xC02D
+ cipher_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 uint16 = 0xC02E
+ cipher_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0xC02F
+ cipher_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0xC030
+ cipher_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0xC031
+ cipher_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0xC032
+ cipher_TLS_ECDHE_PSK_WITH_RC4_128_SHA uint16 = 0xC033
+ cipher_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA uint16 = 0xC034
+ cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA uint16 = 0xC035
+ cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA uint16 = 0xC036
+ cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 uint16 = 0xC037
+ cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 uint16 = 0xC038
+ cipher_TLS_ECDHE_PSK_WITH_NULL_SHA uint16 = 0xC039
+ cipher_TLS_ECDHE_PSK_WITH_NULL_SHA256 uint16 = 0xC03A
+ cipher_TLS_ECDHE_PSK_WITH_NULL_SHA384 uint16 = 0xC03B
+ cipher_TLS_RSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC03C
+ cipher_TLS_RSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC03D
+ cipher_TLS_DH_DSS_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC03E
+ cipher_TLS_DH_DSS_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC03F
+ cipher_TLS_DH_RSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC040
+ cipher_TLS_DH_RSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC041
+ cipher_TLS_DHE_DSS_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC042
+ cipher_TLS_DHE_DSS_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC043
+ cipher_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC044
+ cipher_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC045
+ cipher_TLS_DH_anon_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC046
+ cipher_TLS_DH_anon_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC047
+ cipher_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC048
+ cipher_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC049
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC04A
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC04B
+ cipher_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC04C
+ cipher_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC04D
+ cipher_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC04E
+ cipher_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC04F
+ cipher_TLS_RSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC050
+ cipher_TLS_RSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC051
+ cipher_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC052
+ cipher_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC053
+ cipher_TLS_DH_RSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC054
+ cipher_TLS_DH_RSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC055
+ cipher_TLS_DHE_DSS_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC056
+ cipher_TLS_DHE_DSS_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC057
+ cipher_TLS_DH_DSS_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC058
+ cipher_TLS_DH_DSS_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC059
+ cipher_TLS_DH_anon_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC05A
+ cipher_TLS_DH_anon_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC05B
+ cipher_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC05C
+ cipher_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC05D
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC05E
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC05F
+ cipher_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC060
+ cipher_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC061
+ cipher_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC062
+ cipher_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC063
+ cipher_TLS_PSK_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC064
+ cipher_TLS_PSK_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC065
+ cipher_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC066
+ cipher_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC067
+ cipher_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC068
+ cipher_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC069
+ cipher_TLS_PSK_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC06A
+ cipher_TLS_PSK_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC06B
+ cipher_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC06C
+ cipher_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC06D
+ cipher_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256 uint16 = 0xC06E
+ cipher_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384 uint16 = 0xC06F
+ cipher_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256 uint16 = 0xC070
+ cipher_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384 uint16 = 0xC071
+ cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC072
+ cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC073
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC074
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC075
+ cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC076
+ cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC077
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC078
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC079
+ cipher_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC07A
+ cipher_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC07B
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC07C
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC07D
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC07E
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC07F
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC080
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC081
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC082
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC083
+ cipher_TLS_DH_anon_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC084
+ cipher_TLS_DH_anon_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC085
+ cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC086
+ cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC087
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC088
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC089
+ cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC08A
+ cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC08B
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC08C
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC08D
+ cipher_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC08E
+ cipher_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC08F
+ cipher_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC090
+ cipher_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC091
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 uint16 = 0xC092
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 uint16 = 0xC093
+ cipher_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC094
+ cipher_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC095
+ cipher_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC096
+ cipher_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC097
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC098
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC099
+ cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 uint16 = 0xC09A
+ cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 uint16 = 0xC09B
+ cipher_TLS_RSA_WITH_AES_128_CCM uint16 = 0xC09C
+ cipher_TLS_RSA_WITH_AES_256_CCM uint16 = 0xC09D
+ cipher_TLS_DHE_RSA_WITH_AES_128_CCM uint16 = 0xC09E
+ cipher_TLS_DHE_RSA_WITH_AES_256_CCM uint16 = 0xC09F
+ cipher_TLS_RSA_WITH_AES_128_CCM_8 uint16 = 0xC0A0
+ cipher_TLS_RSA_WITH_AES_256_CCM_8 uint16 = 0xC0A1
+ cipher_TLS_DHE_RSA_WITH_AES_128_CCM_8 uint16 = 0xC0A2
+ cipher_TLS_DHE_RSA_WITH_AES_256_CCM_8 uint16 = 0xC0A3
+ cipher_TLS_PSK_WITH_AES_128_CCM uint16 = 0xC0A4
+ cipher_TLS_PSK_WITH_AES_256_CCM uint16 = 0xC0A5
+ cipher_TLS_DHE_PSK_WITH_AES_128_CCM uint16 = 0xC0A6
+ cipher_TLS_DHE_PSK_WITH_AES_256_CCM uint16 = 0xC0A7
+ cipher_TLS_PSK_WITH_AES_128_CCM_8 uint16 = 0xC0A8
+ cipher_TLS_PSK_WITH_AES_256_CCM_8 uint16 = 0xC0A9
+ cipher_TLS_PSK_DHE_WITH_AES_128_CCM_8 uint16 = 0xC0AA
+ cipher_TLS_PSK_DHE_WITH_AES_256_CCM_8 uint16 = 0xC0AB
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CCM uint16 = 0xC0AC
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CCM uint16 = 0xC0AD
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 uint16 = 0xC0AE
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8 uint16 = 0xC0AF
+ // Unassigned uint16 = 0xC0B0-FF
+ // Unassigned uint16 = 0xC1-CB,*
+ // Unassigned uint16 = 0xCC00-A7
+ cipher_TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCA8
+ cipher_TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCA9
+ cipher_TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCAA
+ cipher_TLS_PSK_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCAB
+ cipher_TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCAC
+ cipher_TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCAD
+ cipher_TLS_RSA_PSK_WITH_CHACHA20_POLY1305_SHA256 uint16 = 0xCCAE
+)
+
+// isBadCipher reports whether the cipher is blacklisted by the HTTP/2 spec.
+// References:
+// https://tools.ietf.org/html/rfc7540#appendix-A
+// Reject cipher suites from Appendix A.
+// "This list includes those cipher suites that do not
+// offer an ephemeral key exchange and those that are
+// based on the TLS null, stream or block cipher type"
+func isBadCipher(cipher uint16) bool {
+ switch cipher {
+ case cipher_TLS_NULL_WITH_NULL_NULL,
+ cipher_TLS_RSA_WITH_NULL_MD5,
+ cipher_TLS_RSA_WITH_NULL_SHA,
+ cipher_TLS_RSA_EXPORT_WITH_RC4_40_MD5,
+ cipher_TLS_RSA_WITH_RC4_128_MD5,
+ cipher_TLS_RSA_WITH_RC4_128_SHA,
+ cipher_TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5,
+ cipher_TLS_RSA_WITH_IDEA_CBC_SHA,
+ cipher_TLS_RSA_EXPORT_WITH_DES40_CBC_SHA,
+ cipher_TLS_RSA_WITH_DES_CBC_SHA,
+ cipher_TLS_RSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_DH_DSS_EXPORT_WITH_DES40_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_DES_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_DH_RSA_EXPORT_WITH_DES40_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_DES_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_DES_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_DES_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_DH_anon_EXPORT_WITH_RC4_40_MD5,
+ cipher_TLS_DH_anon_WITH_RC4_128_MD5,
+ cipher_TLS_DH_anon_EXPORT_WITH_DES40_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_DES_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_KRB5_WITH_DES_CBC_SHA,
+ cipher_TLS_KRB5_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_KRB5_WITH_RC4_128_SHA,
+ cipher_TLS_KRB5_WITH_IDEA_CBC_SHA,
+ cipher_TLS_KRB5_WITH_DES_CBC_MD5,
+ cipher_TLS_KRB5_WITH_3DES_EDE_CBC_MD5,
+ cipher_TLS_KRB5_WITH_RC4_128_MD5,
+ cipher_TLS_KRB5_WITH_IDEA_CBC_MD5,
+ cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA,
+ cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_SHA,
+ cipher_TLS_KRB5_EXPORT_WITH_RC4_40_SHA,
+ cipher_TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5,
+ cipher_TLS_KRB5_EXPORT_WITH_RC2_CBC_40_MD5,
+ cipher_TLS_KRB5_EXPORT_WITH_RC4_40_MD5,
+ cipher_TLS_PSK_WITH_NULL_SHA,
+ cipher_TLS_DHE_PSK_WITH_NULL_SHA,
+ cipher_TLS_RSA_PSK_WITH_NULL_SHA,
+ cipher_TLS_RSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA,
+ cipher_TLS_RSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA,
+ cipher_TLS_RSA_WITH_NULL_SHA256,
+ cipher_TLS_RSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_RSA_WITH_AES_256_CBC_SHA256,
+ cipher_TLS_DH_DSS_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_DH_RSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_DHE_DSS_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_DH_DSS_WITH_AES_256_CBC_SHA256,
+ cipher_TLS_DH_RSA_WITH_AES_256_CBC_SHA256,
+ cipher_TLS_DHE_DSS_WITH_AES_256_CBC_SHA256,
+ cipher_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256,
+ cipher_TLS_DH_anon_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_DH_anon_WITH_AES_256_CBC_SHA256,
+ cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA,
+ cipher_TLS_PSK_WITH_RC4_128_SHA,
+ cipher_TLS_PSK_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_PSK_WITH_AES_128_CBC_SHA,
+ cipher_TLS_PSK_WITH_AES_256_CBC_SHA,
+ cipher_TLS_DHE_PSK_WITH_RC4_128_SHA,
+ cipher_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA,
+ cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA,
+ cipher_TLS_RSA_PSK_WITH_RC4_128_SHA,
+ cipher_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA,
+ cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA,
+ cipher_TLS_RSA_WITH_SEED_CBC_SHA,
+ cipher_TLS_DH_DSS_WITH_SEED_CBC_SHA,
+ cipher_TLS_DH_RSA_WITH_SEED_CBC_SHA,
+ cipher_TLS_DHE_DSS_WITH_SEED_CBC_SHA,
+ cipher_TLS_DHE_RSA_WITH_SEED_CBC_SHA,
+ cipher_TLS_DH_anon_WITH_SEED_CBC_SHA,
+ cipher_TLS_RSA_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_RSA_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_DH_RSA_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_DH_RSA_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_DH_DSS_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_DH_DSS_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_DH_anon_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_DH_anon_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_PSK_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_PSK_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_PSK_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_PSK_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_PSK_WITH_NULL_SHA256,
+ cipher_TLS_PSK_WITH_NULL_SHA384,
+ cipher_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_DHE_PSK_WITH_NULL_SHA256,
+ cipher_TLS_DHE_PSK_WITH_NULL_SHA384,
+ cipher_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_RSA_PSK_WITH_NULL_SHA256,
+ cipher_TLS_RSA_PSK_WITH_NULL_SHA384,
+ cipher_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256,
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA256,
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA256,
+ cipher_TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA256,
+ cipher_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256,
+ cipher_TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA256,
+ cipher_TLS_EMPTY_RENEGOTIATION_INFO_SCSV,
+ cipher_TLS_ECDH_ECDSA_WITH_NULL_SHA,
+ cipher_TLS_ECDH_ECDSA_WITH_RC4_128_SHA,
+ cipher_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_ECDHE_ECDSA_WITH_NULL_SHA,
+ cipher_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,
+ cipher_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_ECDH_RSA_WITH_NULL_SHA,
+ cipher_TLS_ECDH_RSA_WITH_RC4_128_SHA,
+ cipher_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_ECDHE_RSA_WITH_NULL_SHA,
+ cipher_TLS_ECDHE_RSA_WITH_RC4_128_SHA,
+ cipher_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_ECDH_anon_WITH_NULL_SHA,
+ cipher_TLS_ECDH_anon_WITH_RC4_128_SHA,
+ cipher_TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_ECDH_anon_WITH_AES_128_CBC_SHA,
+ cipher_TLS_ECDH_anon_WITH_AES_256_CBC_SHA,
+ cipher_TLS_SRP_SHA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_SRP_SHA_RSA_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_SRP_SHA_DSS_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_SRP_SHA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_SRP_SHA_RSA_WITH_AES_128_CBC_SHA,
+ cipher_TLS_SRP_SHA_DSS_WITH_AES_128_CBC_SHA,
+ cipher_TLS_SRP_SHA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_SRP_SHA_RSA_WITH_AES_256_CBC_SHA,
+ cipher_TLS_SRP_SHA_DSS_WITH_AES_256_CBC_SHA,
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256,
+ cipher_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384,
+ cipher_TLS_ECDHE_PSK_WITH_RC4_128_SHA,
+ cipher_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA,
+ cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA,
+ cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA,
+ cipher_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256,
+ cipher_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384,
+ cipher_TLS_ECDHE_PSK_WITH_NULL_SHA,
+ cipher_TLS_ECDHE_PSK_WITH_NULL_SHA256,
+ cipher_TLS_ECDHE_PSK_WITH_NULL_SHA384,
+ cipher_TLS_RSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_RSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_DH_DSS_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_DH_DSS_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_DH_RSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_DH_RSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_DHE_DSS_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_DHE_DSS_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_DH_anon_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_DH_anon_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_RSA_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_RSA_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_DH_RSA_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_DH_RSA_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_DH_DSS_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_DH_DSS_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_DH_anon_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_DH_anon_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_PSK_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_PSK_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_PSK_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_PSK_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256,
+ cipher_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384,
+ cipher_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256,
+ cipher_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384,
+ cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_DH_RSA_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_DH_DSS_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_DH_anon_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_DH_anon_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256,
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384,
+ cipher_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256,
+ cipher_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384,
+ cipher_TLS_RSA_WITH_AES_128_CCM,
+ cipher_TLS_RSA_WITH_AES_256_CCM,
+ cipher_TLS_RSA_WITH_AES_128_CCM_8,
+ cipher_TLS_RSA_WITH_AES_256_CCM_8,
+ cipher_TLS_PSK_WITH_AES_128_CCM,
+ cipher_TLS_PSK_WITH_AES_256_CCM,
+ cipher_TLS_PSK_WITH_AES_128_CCM_8,
+ cipher_TLS_PSK_WITH_AES_256_CCM_8:
+ return true
+ default:
+ return false
+ }
+}
diff --git a/vendor/golang.org/x/net/http2/client_conn_pool.go b/vendor/golang.org/x/net/http2/client_conn_pool.go
new file mode 100644
index 0000000..f4d9b5e
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/client_conn_pool.go
@@ -0,0 +1,282 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Transport code's client connection pooling.
+
+package http2
+
+import (
+ "crypto/tls"
+ "net/http"
+ "sync"
+)
+
+// ClientConnPool manages a pool of HTTP/2 client connections.
+type ClientConnPool interface {
+ GetClientConn(req *http.Request, addr string) (*ClientConn, error)
+ MarkDead(*ClientConn)
+}
+
+// clientConnPoolIdleCloser is the interface implemented by ClientConnPool
+// implementations which can close their idle connections.
+type clientConnPoolIdleCloser interface {
+ ClientConnPool
+ closeIdleConnections()
+}
+
+var (
+ _ clientConnPoolIdleCloser = (*clientConnPool)(nil)
+ _ clientConnPoolIdleCloser = noDialClientConnPool{}
+)
+
+// TODO: use singleflight for dialing and addConnCalls?
+type clientConnPool struct {
+ t *Transport
+
+ mu sync.Mutex // TODO: maybe switch to RWMutex
+ // TODO: add support for sharing conns based on cert names
+ // (e.g. share conn for googleapis.com and appspot.com)
+ conns map[string][]*ClientConn // key is host:port
+ dialing map[string]*dialCall // currently in-flight dials
+ keys map[*ClientConn][]string
+ addConnCalls map[string]*addConnCall // in-flight addConnIfNeede calls
+}
+
+func (p *clientConnPool) GetClientConn(req *http.Request, addr string) (*ClientConn, error) {
+ return p.getClientConn(req, addr, dialOnMiss)
+}
+
+const (
+ dialOnMiss = true
+ noDialOnMiss = false
+)
+
+// shouldTraceGetConn reports whether getClientConn should call any
+// ClientTrace.GetConn hook associated with the http.Request.
+//
+// This complexity is needed to avoid double calls of the GetConn hook
+// during the back-and-forth between net/http and x/net/http2 (when the
+// net/http.Transport is upgraded to also speak http2), as well as support
+// the case where x/net/http2 is being used directly.
+func (p *clientConnPool) shouldTraceGetConn(st clientConnIdleState) bool {
+ // If our Transport wasn't made via ConfigureTransport, always
+ // trace the GetConn hook if provided, because that means the
+ // http2 package is being used directly and it's the one
+ // dialing, as opposed to net/http.
+ if _, ok := p.t.ConnPool.(noDialClientConnPool); !ok {
+ return true
+ }
+ // Otherwise, only use the GetConn hook if this connection has
+ // been used previously for other requests. For fresh
+ // connections, the net/http package does the dialing.
+ return !st.freshConn
+}
+
+func (p *clientConnPool) getClientConn(req *http.Request, addr string, dialOnMiss bool) (*ClientConn, error) {
+ if isConnectionCloseRequest(req) && dialOnMiss {
+ // It gets its own connection.
+ traceGetConn(req, addr)
+ const singleUse = true
+ cc, err := p.t.dialClientConn(addr, singleUse)
+ if err != nil {
+ return nil, err
+ }
+ return cc, nil
+ }
+ p.mu.Lock()
+ for _, cc := range p.conns[addr] {
+ if st := cc.idleState(); st.canTakeNewRequest {
+ if p.shouldTraceGetConn(st) {
+ traceGetConn(req, addr)
+ }
+ p.mu.Unlock()
+ return cc, nil
+ }
+ }
+ if !dialOnMiss {
+ p.mu.Unlock()
+ return nil, ErrNoCachedConn
+ }
+ traceGetConn(req, addr)
+ call := p.getStartDialLocked(addr)
+ p.mu.Unlock()
+ <-call.done
+ return call.res, call.err
+}
+
+// dialCall is an in-flight Transport dial call to a host.
+type dialCall struct {
+ p *clientConnPool
+ done chan struct{} // closed when done
+ res *ClientConn // valid after done is closed
+ err error // valid after done is closed
+}
+
+// requires p.mu is held.
+func (p *clientConnPool) getStartDialLocked(addr string) *dialCall {
+ if call, ok := p.dialing[addr]; ok {
+ // A dial is already in-flight. Don't start another.
+ return call
+ }
+ call := &dialCall{p: p, done: make(chan struct{})}
+ if p.dialing == nil {
+ p.dialing = make(map[string]*dialCall)
+ }
+ p.dialing[addr] = call
+ go call.dial(addr)
+ return call
+}
+
+// run in its own goroutine.
+func (c *dialCall) dial(addr string) {
+ const singleUse = false // shared conn
+ c.res, c.err = c.p.t.dialClientConn(addr, singleUse)
+ close(c.done)
+
+ c.p.mu.Lock()
+ delete(c.p.dialing, addr)
+ if c.err == nil {
+ c.p.addConnLocked(addr, c.res)
+ }
+ c.p.mu.Unlock()
+}
+
+// addConnIfNeeded makes a NewClientConn out of c if a connection for key doesn't
+// already exist. It coalesces concurrent calls with the same key.
+// This is used by the http1 Transport code when it creates a new connection. Because
+// the http1 Transport doesn't de-dup TCP dials to outbound hosts (because it doesn't know
+// the protocol), it can get into a situation where it has multiple TLS connections.
+// This code decides which ones live or die.
+// The return value used is whether c was used.
+// c is never closed.
+func (p *clientConnPool) addConnIfNeeded(key string, t *Transport, c *tls.Conn) (used bool, err error) {
+ p.mu.Lock()
+ for _, cc := range p.conns[key] {
+ if cc.CanTakeNewRequest() {
+ p.mu.Unlock()
+ return false, nil
+ }
+ }
+ call, dup := p.addConnCalls[key]
+ if !dup {
+ if p.addConnCalls == nil {
+ p.addConnCalls = make(map[string]*addConnCall)
+ }
+ call = &addConnCall{
+ p: p,
+ done: make(chan struct{}),
+ }
+ p.addConnCalls[key] = call
+ go call.run(t, key, c)
+ }
+ p.mu.Unlock()
+
+ <-call.done
+ if call.err != nil {
+ return false, call.err
+ }
+ return !dup, nil
+}
+
+type addConnCall struct {
+ p *clientConnPool
+ done chan struct{} // closed when done
+ err error
+}
+
+func (c *addConnCall) run(t *Transport, key string, tc *tls.Conn) {
+ cc, err := t.NewClientConn(tc)
+
+ p := c.p
+ p.mu.Lock()
+ if err != nil {
+ c.err = err
+ } else {
+ p.addConnLocked(key, cc)
+ }
+ delete(p.addConnCalls, key)
+ p.mu.Unlock()
+ close(c.done)
+}
+
+func (p *clientConnPool) addConn(key string, cc *ClientConn) {
+ p.mu.Lock()
+ p.addConnLocked(key, cc)
+ p.mu.Unlock()
+}
+
+// p.mu must be held
+func (p *clientConnPool) addConnLocked(key string, cc *ClientConn) {
+ for _, v := range p.conns[key] {
+ if v == cc {
+ return
+ }
+ }
+ if p.conns == nil {
+ p.conns = make(map[string][]*ClientConn)
+ }
+ if p.keys == nil {
+ p.keys = make(map[*ClientConn][]string)
+ }
+ p.conns[key] = append(p.conns[key], cc)
+ p.keys[cc] = append(p.keys[cc], key)
+}
+
+func (p *clientConnPool) MarkDead(cc *ClientConn) {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ for _, key := range p.keys[cc] {
+ vv, ok := p.conns[key]
+ if !ok {
+ continue
+ }
+ newList := filterOutClientConn(vv, cc)
+ if len(newList) > 0 {
+ p.conns[key] = newList
+ } else {
+ delete(p.conns, key)
+ }
+ }
+ delete(p.keys, cc)
+}
+
+func (p *clientConnPool) closeIdleConnections() {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ // TODO: don't close a cc if it was just added to the pool
+ // milliseconds ago and has never been used. There's currently
+ // a small race window with the HTTP/1 Transport's integration
+ // where it can add an idle conn just before using it, and
+ // somebody else can concurrently call CloseIdleConns and
+ // break some caller's RoundTrip.
+ for _, vv := range p.conns {
+ for _, cc := range vv {
+ cc.closeIfIdle()
+ }
+ }
+}
+
+func filterOutClientConn(in []*ClientConn, exclude *ClientConn) []*ClientConn {
+ out := in[:0]
+ for _, v := range in {
+ if v != exclude {
+ out = append(out, v)
+ }
+ }
+ // If we filtered it out, zero out the last item to prevent
+ // the GC from seeing it.
+ if len(in) != len(out) {
+ in[len(in)-1] = nil
+ }
+ return out
+}
+
+// noDialClientConnPool is an implementation of http2.ClientConnPool
+// which never dials. We let the HTTP/1.1 client dial and use its TLS
+// connection instead.
+type noDialClientConnPool struct{ *clientConnPool }
+
+func (p noDialClientConnPool) GetClientConn(req *http.Request, addr string) (*ClientConn, error) {
+ return p.getClientConn(req, addr, noDialOnMiss)
+}
diff --git a/vendor/golang.org/x/net/http2/databuffer.go b/vendor/golang.org/x/net/http2/databuffer.go
new file mode 100644
index 0000000..a3067f8
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/databuffer.go
@@ -0,0 +1,146 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "errors"
+ "fmt"
+ "sync"
+)
+
+// Buffer chunks are allocated from a pool to reduce pressure on GC.
+// The maximum wasted space per dataBuffer is 2x the largest size class,
+// which happens when the dataBuffer has multiple chunks and there is
+// one unread byte in both the first and last chunks. We use a few size
+// classes to minimize overheads for servers that typically receive very
+// small request bodies.
+//
+// TODO: Benchmark to determine if the pools are necessary. The GC may have
+// improved enough that we can instead allocate chunks like this:
+// make([]byte, max(16<<10, expectedBytesRemaining))
+var (
+ dataChunkSizeClasses = []int{
+ 1 << 10,
+ 2 << 10,
+ 4 << 10,
+ 8 << 10,
+ 16 << 10,
+ }
+ dataChunkPools = [...]sync.Pool{
+ {New: func() interface{} { return make([]byte, 1<<10) }},
+ {New: func() interface{} { return make([]byte, 2<<10) }},
+ {New: func() interface{} { return make([]byte, 4<<10) }},
+ {New: func() interface{} { return make([]byte, 8<<10) }},
+ {New: func() interface{} { return make([]byte, 16<<10) }},
+ }
+)
+
+func getDataBufferChunk(size int64) []byte {
+ i := 0
+ for ; i < len(dataChunkSizeClasses)-1; i++ {
+ if size <= int64(dataChunkSizeClasses[i]) {
+ break
+ }
+ }
+ return dataChunkPools[i].Get().([]byte)
+}
+
+func putDataBufferChunk(p []byte) {
+ for i, n := range dataChunkSizeClasses {
+ if len(p) == n {
+ dataChunkPools[i].Put(p)
+ return
+ }
+ }
+ panic(fmt.Sprintf("unexpected buffer len=%v", len(p)))
+}
+
+// dataBuffer is an io.ReadWriter backed by a list of data chunks.
+// Each dataBuffer is used to read DATA frames on a single stream.
+// The buffer is divided into chunks so the server can limit the
+// total memory used by a single connection without limiting the
+// request body size on any single stream.
+type dataBuffer struct {
+ chunks [][]byte
+ r int // next byte to read is chunks[0][r]
+ w int // next byte to write is chunks[len(chunks)-1][w]
+ size int // total buffered bytes
+ expected int64 // we expect at least this many bytes in future Write calls (ignored if <= 0)
+}
+
+var errReadEmpty = errors.New("read from empty dataBuffer")
+
+// Read copies bytes from the buffer into p.
+// It is an error to read when no data is available.
+func (b *dataBuffer) Read(p []byte) (int, error) {
+ if b.size == 0 {
+ return 0, errReadEmpty
+ }
+ var ntotal int
+ for len(p) > 0 && b.size > 0 {
+ readFrom := b.bytesFromFirstChunk()
+ n := copy(p, readFrom)
+ p = p[n:]
+ ntotal += n
+ b.r += n
+ b.size -= n
+ // If the first chunk has been consumed, advance to the next chunk.
+ if b.r == len(b.chunks[0]) {
+ putDataBufferChunk(b.chunks[0])
+ end := len(b.chunks) - 1
+ copy(b.chunks[:end], b.chunks[1:])
+ b.chunks[end] = nil
+ b.chunks = b.chunks[:end]
+ b.r = 0
+ }
+ }
+ return ntotal, nil
+}
+
+func (b *dataBuffer) bytesFromFirstChunk() []byte {
+ if len(b.chunks) == 1 {
+ return b.chunks[0][b.r:b.w]
+ }
+ return b.chunks[0][b.r:]
+}
+
+// Len returns the number of bytes of the unread portion of the buffer.
+func (b *dataBuffer) Len() int {
+ return b.size
+}
+
+// Write appends p to the buffer.
+func (b *dataBuffer) Write(p []byte) (int, error) {
+ ntotal := len(p)
+ for len(p) > 0 {
+ // If the last chunk is empty, allocate a new chunk. Try to allocate
+ // enough to fully copy p plus any additional bytes we expect to
+ // receive. However, this may allocate less than len(p).
+ want := int64(len(p))
+ if b.expected > want {
+ want = b.expected
+ }
+ chunk := b.lastChunkOrAlloc(want)
+ n := copy(chunk[b.w:], p)
+ p = p[n:]
+ b.w += n
+ b.size += n
+ b.expected -= int64(n)
+ }
+ return ntotal, nil
+}
+
+func (b *dataBuffer) lastChunkOrAlloc(want int64) []byte {
+ if len(b.chunks) != 0 {
+ last := b.chunks[len(b.chunks)-1]
+ if b.w < len(last) {
+ return last
+ }
+ }
+ chunk := getDataBufferChunk(want)
+ b.chunks = append(b.chunks, chunk)
+ b.w = 0
+ return chunk
+}
diff --git a/vendor/golang.org/x/net/http2/errors.go b/vendor/golang.org/x/net/http2/errors.go
new file mode 100644
index 0000000..71f2c46
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/errors.go
@@ -0,0 +1,133 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "errors"
+ "fmt"
+)
+
+// An ErrCode is an unsigned 32-bit error code as defined in the HTTP/2 spec.
+type ErrCode uint32
+
+const (
+ ErrCodeNo ErrCode = 0x0
+ ErrCodeProtocol ErrCode = 0x1
+ ErrCodeInternal ErrCode = 0x2
+ ErrCodeFlowControl ErrCode = 0x3
+ ErrCodeSettingsTimeout ErrCode = 0x4
+ ErrCodeStreamClosed ErrCode = 0x5
+ ErrCodeFrameSize ErrCode = 0x6
+ ErrCodeRefusedStream ErrCode = 0x7
+ ErrCodeCancel ErrCode = 0x8
+ ErrCodeCompression ErrCode = 0x9
+ ErrCodeConnect ErrCode = 0xa
+ ErrCodeEnhanceYourCalm ErrCode = 0xb
+ ErrCodeInadequateSecurity ErrCode = 0xc
+ ErrCodeHTTP11Required ErrCode = 0xd
+)
+
+var errCodeName = map[ErrCode]string{
+ ErrCodeNo: "NO_ERROR",
+ ErrCodeProtocol: "PROTOCOL_ERROR",
+ ErrCodeInternal: "INTERNAL_ERROR",
+ ErrCodeFlowControl: "FLOW_CONTROL_ERROR",
+ ErrCodeSettingsTimeout: "SETTINGS_TIMEOUT",
+ ErrCodeStreamClosed: "STREAM_CLOSED",
+ ErrCodeFrameSize: "FRAME_SIZE_ERROR",
+ ErrCodeRefusedStream: "REFUSED_STREAM",
+ ErrCodeCancel: "CANCEL",
+ ErrCodeCompression: "COMPRESSION_ERROR",
+ ErrCodeConnect: "CONNECT_ERROR",
+ ErrCodeEnhanceYourCalm: "ENHANCE_YOUR_CALM",
+ ErrCodeInadequateSecurity: "INADEQUATE_SECURITY",
+ ErrCodeHTTP11Required: "HTTP_1_1_REQUIRED",
+}
+
+func (e ErrCode) String() string {
+ if s, ok := errCodeName[e]; ok {
+ return s
+ }
+ return fmt.Sprintf("unknown error code 0x%x", uint32(e))
+}
+
+// ConnectionError is an error that results in the termination of the
+// entire connection.
+type ConnectionError ErrCode
+
+func (e ConnectionError) Error() string { return fmt.Sprintf("connection error: %s", ErrCode(e)) }
+
+// StreamError is an error that only affects one stream within an
+// HTTP/2 connection.
+type StreamError struct {
+ StreamID uint32
+ Code ErrCode
+ Cause error // optional additional detail
+}
+
+func streamError(id uint32, code ErrCode) StreamError {
+ return StreamError{StreamID: id, Code: code}
+}
+
+func (e StreamError) Error() string {
+ if e.Cause != nil {
+ return fmt.Sprintf("stream error: stream ID %d; %v; %v", e.StreamID, e.Code, e.Cause)
+ }
+ return fmt.Sprintf("stream error: stream ID %d; %v", e.StreamID, e.Code)
+}
+
+// 6.9.1 The Flow Control Window
+// "If a sender receives a WINDOW_UPDATE that causes a flow control
+// window to exceed this maximum it MUST terminate either the stream
+// or the connection, as appropriate. For streams, [...]; for the
+// connection, a GOAWAY frame with a FLOW_CONTROL_ERROR code."
+type goAwayFlowError struct{}
+
+func (goAwayFlowError) Error() string { return "connection exceeded flow control window size" }
+
+// connError represents an HTTP/2 ConnectionError error code, along
+// with a string (for debugging) explaining why.
+//
+// Errors of this type are only returned by the frame parser functions
+// and converted into ConnectionError(Code), after stashing away
+// the Reason into the Framer's errDetail field, accessible via
+// the (*Framer).ErrorDetail method.
+type connError struct {
+ Code ErrCode // the ConnectionError error code
+ Reason string // additional reason
+}
+
+func (e connError) Error() string {
+ return fmt.Sprintf("http2: connection error: %v: %v", e.Code, e.Reason)
+}
+
+type pseudoHeaderError string
+
+func (e pseudoHeaderError) Error() string {
+ return fmt.Sprintf("invalid pseudo-header %q", string(e))
+}
+
+type duplicatePseudoHeaderError string
+
+func (e duplicatePseudoHeaderError) Error() string {
+ return fmt.Sprintf("duplicate pseudo-header %q", string(e))
+}
+
+type headerFieldNameError string
+
+func (e headerFieldNameError) Error() string {
+ return fmt.Sprintf("invalid header field name %q", string(e))
+}
+
+type headerFieldValueError string
+
+func (e headerFieldValueError) Error() string {
+ return fmt.Sprintf("invalid header field value %q", string(e))
+}
+
+var (
+ errMixPseudoHeaderTypes = errors.New("mix of request and response pseudo headers")
+ errPseudoAfterRegular = errors.New("pseudo header field after regular")
+)
diff --git a/vendor/golang.org/x/net/http2/flow.go b/vendor/golang.org/x/net/http2/flow.go
new file mode 100644
index 0000000..cea601f
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/flow.go
@@ -0,0 +1,50 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Flow control
+
+package http2
+
+// flow is the flow control window's size.
+type flow struct {
+ // n is the number of DATA bytes we're allowed to send.
+ // A flow is kept both on a conn and a per-stream.
+ n int32
+
+ // conn points to the shared connection-level flow that is
+ // shared by all streams on that conn. It is nil for the flow
+ // that's on the conn directly.
+ conn *flow
+}
+
+func (f *flow) setConnFlow(cf *flow) { f.conn = cf }
+
+func (f *flow) available() int32 {
+ n := f.n
+ if f.conn != nil && f.conn.n < n {
+ n = f.conn.n
+ }
+ return n
+}
+
+func (f *flow) take(n int32) {
+ if n > f.available() {
+ panic("internal error: took too much")
+ }
+ f.n -= n
+ if f.conn != nil {
+ f.conn.n -= n
+ }
+}
+
+// add adds n bytes (positive or negative) to the flow control window.
+// It returns false if the sum would exceed 2^31-1.
+func (f *flow) add(n int32) bool {
+ sum := f.n + n
+ if (sum > n) == (f.n > 0) {
+ f.n = sum
+ return true
+ }
+ return false
+}
diff --git a/vendor/golang.org/x/net/http2/frame.go b/vendor/golang.org/x/net/http2/frame.go
new file mode 100644
index 0000000..b46791d
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/frame.go
@@ -0,0 +1,1614 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "bytes"
+ "encoding/binary"
+ "errors"
+ "fmt"
+ "io"
+ "log"
+ "strings"
+ "sync"
+
+ "golang.org/x/net/http/httpguts"
+ "golang.org/x/net/http2/hpack"
+)
+
+const frameHeaderLen = 9
+
+var padZeros = make([]byte, 255) // zeros for padding
+
+// A FrameType is a registered frame type as defined in
+// http://http2.github.io/http2-spec/#rfc.section.11.2
+type FrameType uint8
+
+const (
+ FrameData FrameType = 0x0
+ FrameHeaders FrameType = 0x1
+ FramePriority FrameType = 0x2
+ FrameRSTStream FrameType = 0x3
+ FrameSettings FrameType = 0x4
+ FramePushPromise FrameType = 0x5
+ FramePing FrameType = 0x6
+ FrameGoAway FrameType = 0x7
+ FrameWindowUpdate FrameType = 0x8
+ FrameContinuation FrameType = 0x9
+)
+
+var frameName = map[FrameType]string{
+ FrameData: "DATA",
+ FrameHeaders: "HEADERS",
+ FramePriority: "PRIORITY",
+ FrameRSTStream: "RST_STREAM",
+ FrameSettings: "SETTINGS",
+ FramePushPromise: "PUSH_PROMISE",
+ FramePing: "PING",
+ FrameGoAway: "GOAWAY",
+ FrameWindowUpdate: "WINDOW_UPDATE",
+ FrameContinuation: "CONTINUATION",
+}
+
+func (t FrameType) String() string {
+ if s, ok := frameName[t]; ok {
+ return s
+ }
+ return fmt.Sprintf("UNKNOWN_FRAME_TYPE_%d", uint8(t))
+}
+
+// Flags is a bitmask of HTTP/2 flags.
+// The meaning of flags varies depending on the frame type.
+type Flags uint8
+
+// Has reports whether f contains all (0 or more) flags in v.
+func (f Flags) Has(v Flags) bool {
+ return (f & v) == v
+}
+
+// Frame-specific FrameHeader flag bits.
+const (
+ // Data Frame
+ FlagDataEndStream Flags = 0x1
+ FlagDataPadded Flags = 0x8
+
+ // Headers Frame
+ FlagHeadersEndStream Flags = 0x1
+ FlagHeadersEndHeaders Flags = 0x4
+ FlagHeadersPadded Flags = 0x8
+ FlagHeadersPriority Flags = 0x20
+
+ // Settings Frame
+ FlagSettingsAck Flags = 0x1
+
+ // Ping Frame
+ FlagPingAck Flags = 0x1
+
+ // Continuation Frame
+ FlagContinuationEndHeaders Flags = 0x4
+
+ FlagPushPromiseEndHeaders Flags = 0x4
+ FlagPushPromisePadded Flags = 0x8
+)
+
+var flagName = map[FrameType]map[Flags]string{
+ FrameData: {
+ FlagDataEndStream: "END_STREAM",
+ FlagDataPadded: "PADDED",
+ },
+ FrameHeaders: {
+ FlagHeadersEndStream: "END_STREAM",
+ FlagHeadersEndHeaders: "END_HEADERS",
+ FlagHeadersPadded: "PADDED",
+ FlagHeadersPriority: "PRIORITY",
+ },
+ FrameSettings: {
+ FlagSettingsAck: "ACK",
+ },
+ FramePing: {
+ FlagPingAck: "ACK",
+ },
+ FrameContinuation: {
+ FlagContinuationEndHeaders: "END_HEADERS",
+ },
+ FramePushPromise: {
+ FlagPushPromiseEndHeaders: "END_HEADERS",
+ FlagPushPromisePadded: "PADDED",
+ },
+}
+
+// a frameParser parses a frame given its FrameHeader and payload
+// bytes. The length of payload will always equal fh.Length (which
+// might be 0).
+type frameParser func(fc *frameCache, fh FrameHeader, payload []byte) (Frame, error)
+
+var frameParsers = map[FrameType]frameParser{
+ FrameData: parseDataFrame,
+ FrameHeaders: parseHeadersFrame,
+ FramePriority: parsePriorityFrame,
+ FrameRSTStream: parseRSTStreamFrame,
+ FrameSettings: parseSettingsFrame,
+ FramePushPromise: parsePushPromise,
+ FramePing: parsePingFrame,
+ FrameGoAway: parseGoAwayFrame,
+ FrameWindowUpdate: parseWindowUpdateFrame,
+ FrameContinuation: parseContinuationFrame,
+}
+
+func typeFrameParser(t FrameType) frameParser {
+ if f := frameParsers[t]; f != nil {
+ return f
+ }
+ return parseUnknownFrame
+}
+
+// A FrameHeader is the 9 byte header of all HTTP/2 frames.
+//
+// See http://http2.github.io/http2-spec/#FrameHeader
+type FrameHeader struct {
+ valid bool // caller can access []byte fields in the Frame
+
+ // Type is the 1 byte frame type. There are ten standard frame
+ // types, but extension frame types may be written by WriteRawFrame
+ // and will be returned by ReadFrame (as UnknownFrame).
+ Type FrameType
+
+ // Flags are the 1 byte of 8 potential bit flags per frame.
+ // They are specific to the frame type.
+ Flags Flags
+
+ // Length is the length of the frame, not including the 9 byte header.
+ // The maximum size is one byte less than 16MB (uint24), but only
+ // frames up to 16KB are allowed without peer agreement.
+ Length uint32
+
+ // StreamID is which stream this frame is for. Certain frames
+ // are not stream-specific, in which case this field is 0.
+ StreamID uint32
+}
+
+// Header returns h. It exists so FrameHeaders can be embedded in other
+// specific frame types and implement the Frame interface.
+func (h FrameHeader) Header() FrameHeader { return h }
+
+func (h FrameHeader) String() string {
+ var buf bytes.Buffer
+ buf.WriteString("[FrameHeader ")
+ h.writeDebug(&buf)
+ buf.WriteByte(']')
+ return buf.String()
+}
+
+func (h FrameHeader) writeDebug(buf *bytes.Buffer) {
+ buf.WriteString(h.Type.String())
+ if h.Flags != 0 {
+ buf.WriteString(" flags=")
+ set := 0
+ for i := uint8(0); i < 8; i++ {
+ if h.Flags&(1<<i) == 0 {
+ continue
+ }
+ set++
+ if set > 1 {
+ buf.WriteByte('|')
+ }
+ name := flagName[h.Type][Flags(1<<i)]
+ if name != "" {
+ buf.WriteString(name)
+ } else {
+ fmt.Fprintf(buf, "0x%x", 1<<i)
+ }
+ }
+ }
+ if h.StreamID != 0 {
+ fmt.Fprintf(buf, " stream=%d", h.StreamID)
+ }
+ fmt.Fprintf(buf, " len=%d", h.Length)
+}
+
+func (h *FrameHeader) checkValid() {
+ if !h.valid {
+ panic("Frame accessor called on non-owned Frame")
+ }
+}
+
+func (h *FrameHeader) invalidate() { h.valid = false }
+
+// frame header bytes.
+// Used only by ReadFrameHeader.
+var fhBytes = sync.Pool{
+ New: func() interface{} {
+ buf := make([]byte, frameHeaderLen)
+ return &buf
+ },
+}
+
+// ReadFrameHeader reads 9 bytes from r and returns a FrameHeader.
+// Most users should use Framer.ReadFrame instead.
+func ReadFrameHeader(r io.Reader) (FrameHeader, error) {
+ bufp := fhBytes.Get().(*[]byte)
+ defer fhBytes.Put(bufp)
+ return readFrameHeader(*bufp, r)
+}
+
+func readFrameHeader(buf []byte, r io.Reader) (FrameHeader, error) {
+ _, err := io.ReadFull(r, buf[:frameHeaderLen])
+ if err != nil {
+ return FrameHeader{}, err
+ }
+ return FrameHeader{
+ Length: (uint32(buf[0])<<16 | uint32(buf[1])<<8 | uint32(buf[2])),
+ Type: FrameType(buf[3]),
+ Flags: Flags(buf[4]),
+ StreamID: binary.BigEndian.Uint32(buf[5:]) & (1<<31 - 1),
+ valid: true,
+ }, nil
+}
+
+// A Frame is the base interface implemented by all frame types.
+// Callers will generally type-assert the specific frame type:
+// *HeadersFrame, *SettingsFrame, *WindowUpdateFrame, etc.
+//
+// Frames are only valid until the next call to Framer.ReadFrame.
+type Frame interface {
+ Header() FrameHeader
+
+ // invalidate is called by Framer.ReadFrame to make this
+ // frame's buffers as being invalid, since the subsequent
+ // frame will reuse them.
+ invalidate()
+}
+
+// A Framer reads and writes Frames.
+type Framer struct {
+ r io.Reader
+ lastFrame Frame
+ errDetail error
+
+ // lastHeaderStream is non-zero if the last frame was an
+ // unfinished HEADERS/CONTINUATION.
+ lastHeaderStream uint32
+
+ maxReadSize uint32
+ headerBuf [frameHeaderLen]byte
+
+ // TODO: let getReadBuf be configurable, and use a less memory-pinning
+ // allocator in server.go to minimize memory pinned for many idle conns.
+ // Will probably also need to make frame invalidation have a hook too.
+ getReadBuf func(size uint32) []byte
+ readBuf []byte // cache for default getReadBuf
+
+ maxWriteSize uint32 // zero means unlimited; TODO: implement
+
+ w io.Writer
+ wbuf []byte
+
+ // AllowIllegalWrites permits the Framer's Write methods to
+ // write frames that do not conform to the HTTP/2 spec. This
+ // permits using the Framer to test other HTTP/2
+ // implementations' conformance to the spec.
+ // If false, the Write methods will prefer to return an error
+ // rather than comply.
+ AllowIllegalWrites bool
+
+ // AllowIllegalReads permits the Framer's ReadFrame method
+ // to return non-compliant frames or frame orders.
+ // This is for testing and permits using the Framer to test
+ // other HTTP/2 implementations' conformance to the spec.
+ // It is not compatible with ReadMetaHeaders.
+ AllowIllegalReads bool
+
+ // ReadMetaHeaders if non-nil causes ReadFrame to merge
+ // HEADERS and CONTINUATION frames together and return
+ // MetaHeadersFrame instead.
+ ReadMetaHeaders *hpack.Decoder
+
+ // MaxHeaderListSize is the http2 MAX_HEADER_LIST_SIZE.
+ // It's used only if ReadMetaHeaders is set; 0 means a sane default
+ // (currently 16MB)
+ // If the limit is hit, MetaHeadersFrame.Truncated is set true.
+ MaxHeaderListSize uint32
+
+ // TODO: track which type of frame & with which flags was sent
+ // last. Then return an error (unless AllowIllegalWrites) if
+ // we're in the middle of a header block and a
+ // non-Continuation or Continuation on a different stream is
+ // attempted to be written.
+
+ logReads, logWrites bool
+
+ debugFramer *Framer // only use for logging written writes
+ debugFramerBuf *bytes.Buffer
+ debugReadLoggerf func(string, ...interface{})
+ debugWriteLoggerf func(string, ...interface{})
+
+ frameCache *frameCache // nil if frames aren't reused (default)
+}
+
+func (fr *Framer) maxHeaderListSize() uint32 {
+ if fr.MaxHeaderListSize == 0 {
+ return 16 << 20 // sane default, per docs
+ }
+ return fr.MaxHeaderListSize
+}
+
+func (f *Framer) startWrite(ftype FrameType, flags Flags, streamID uint32) {
+ // Write the FrameHeader.
+ f.wbuf = append(f.wbuf[:0],
+ 0, // 3 bytes of length, filled in in endWrite
+ 0,
+ 0,
+ byte(ftype),
+ byte(flags),
+ byte(streamID>>24),
+ byte(streamID>>16),
+ byte(streamID>>8),
+ byte(streamID))
+}
+
+func (f *Framer) endWrite() error {
+ // Now that we know the final size, fill in the FrameHeader in
+ // the space previously reserved for it. Abuse append.
+ length := len(f.wbuf) - frameHeaderLen
+ if length >= (1 << 24) {
+ return ErrFrameTooLarge
+ }
+ _ = append(f.wbuf[:0],
+ byte(length>>16),
+ byte(length>>8),
+ byte(length))
+ if f.logWrites {
+ f.logWrite()
+ }
+
+ n, err := f.w.Write(f.wbuf)
+ if err == nil && n != len(f.wbuf) {
+ err = io.ErrShortWrite
+ }
+ return err
+}
+
+func (f *Framer) logWrite() {
+ if f.debugFramer == nil {
+ f.debugFramerBuf = new(bytes.Buffer)
+ f.debugFramer = NewFramer(nil, f.debugFramerBuf)
+ f.debugFramer.logReads = false // we log it ourselves, saying "wrote" below
+ // Let us read anything, even if we accidentally wrote it
+ // in the wrong order:
+ f.debugFramer.AllowIllegalReads = true
+ }
+ f.debugFramerBuf.Write(f.wbuf)
+ fr, err := f.debugFramer.ReadFrame()
+ if err != nil {
+ f.debugWriteLoggerf("http2: Framer %p: failed to decode just-written frame", f)
+ return
+ }
+ f.debugWriteLoggerf("http2: Framer %p: wrote %v", f, summarizeFrame(fr))
+}
+
+func (f *Framer) writeByte(v byte) { f.wbuf = append(f.wbuf, v) }
+func (f *Framer) writeBytes(v []byte) { f.wbuf = append(f.wbuf, v...) }
+func (f *Framer) writeUint16(v uint16) { f.wbuf = append(f.wbuf, byte(v>>8), byte(v)) }
+func (f *Framer) writeUint32(v uint32) {
+ f.wbuf = append(f.wbuf, byte(v>>24), byte(v>>16), byte(v>>8), byte(v))
+}
+
+const (
+ minMaxFrameSize = 1 << 14
+ maxFrameSize = 1<<24 - 1
+)
+
+// SetReuseFrames allows the Framer to reuse Frames.
+// If called on a Framer, Frames returned by calls to ReadFrame are only
+// valid until the next call to ReadFrame.
+func (fr *Framer) SetReuseFrames() {
+ if fr.frameCache != nil {
+ return
+ }
+ fr.frameCache = &frameCache{}
+}
+
+type frameCache struct {
+ dataFrame DataFrame
+}
+
+func (fc *frameCache) getDataFrame() *DataFrame {
+ if fc == nil {
+ return &DataFrame{}
+ }
+ return &fc.dataFrame
+}
+
+// NewFramer returns a Framer that writes frames to w and reads them from r.
+func NewFramer(w io.Writer, r io.Reader) *Framer {
+ fr := &Framer{
+ w: w,
+ r: r,
+ logReads: logFrameReads,
+ logWrites: logFrameWrites,
+ debugReadLoggerf: log.Printf,
+ debugWriteLoggerf: log.Printf,
+ }
+ fr.getReadBuf = func(size uint32) []byte {
+ if cap(fr.readBuf) >= int(size) {
+ return fr.readBuf[:size]
+ }
+ fr.readBuf = make([]byte, size)
+ return fr.readBuf
+ }
+ fr.SetMaxReadFrameSize(maxFrameSize)
+ return fr
+}
+
+// SetMaxReadFrameSize sets the maximum size of a frame
+// that will be read by a subsequent call to ReadFrame.
+// It is the caller's responsibility to advertise this
+// limit with a SETTINGS frame.
+func (fr *Framer) SetMaxReadFrameSize(v uint32) {
+ if v > maxFrameSize {
+ v = maxFrameSize
+ }
+ fr.maxReadSize = v
+}
+
+// ErrorDetail returns a more detailed error of the last error
+// returned by Framer.ReadFrame. For instance, if ReadFrame
+// returns a StreamError with code PROTOCOL_ERROR, ErrorDetail
+// will say exactly what was invalid. ErrorDetail is not guaranteed
+// to return a non-nil value and like the rest of the http2 package,
+// its return value is not protected by an API compatibility promise.
+// ErrorDetail is reset after the next call to ReadFrame.
+func (fr *Framer) ErrorDetail() error {
+ return fr.errDetail
+}
+
+// ErrFrameTooLarge is returned from Framer.ReadFrame when the peer
+// sends a frame that is larger than declared with SetMaxReadFrameSize.
+var ErrFrameTooLarge = errors.New("http2: frame too large")
+
+// terminalReadFrameError reports whether err is an unrecoverable
+// error from ReadFrame and no other frames should be read.
+func terminalReadFrameError(err error) bool {
+ if _, ok := err.(StreamError); ok {
+ return false
+ }
+ return err != nil
+}
+
+// ReadFrame reads a single frame. The returned Frame is only valid
+// until the next call to ReadFrame.
+//
+// If the frame is larger than previously set with SetMaxReadFrameSize, the
+// returned error is ErrFrameTooLarge. Other errors may be of type
+// ConnectionError, StreamError, or anything else from the underlying
+// reader.
+func (fr *Framer) ReadFrame() (Frame, error) {
+ fr.errDetail = nil
+ if fr.lastFrame != nil {
+ fr.lastFrame.invalidate()
+ }
+ fh, err := readFrameHeader(fr.headerBuf[:], fr.r)
+ if err != nil {
+ return nil, err
+ }
+ if fh.Length > fr.maxReadSize {
+ return nil, ErrFrameTooLarge
+ }
+ payload := fr.getReadBuf(fh.Length)
+ if _, err := io.ReadFull(fr.r, payload); err != nil {
+ return nil, err
+ }
+ f, err := typeFrameParser(fh.Type)(fr.frameCache, fh, payload)
+ if err != nil {
+ if ce, ok := err.(connError); ok {
+ return nil, fr.connError(ce.Code, ce.Reason)
+ }
+ return nil, err
+ }
+ if err := fr.checkFrameOrder(f); err != nil {
+ return nil, err
+ }
+ if fr.logReads {
+ fr.debugReadLoggerf("http2: Framer %p: read %v", fr, summarizeFrame(f))
+ }
+ if fh.Type == FrameHeaders && fr.ReadMetaHeaders != nil {
+ return fr.readMetaFrame(f.(*HeadersFrame))
+ }
+ return f, nil
+}
+
+// connError returns ConnectionError(code) but first
+// stashes away a public reason to the caller can optionally relay it
+// to the peer before hanging up on them. This might help others debug
+// their implementations.
+func (fr *Framer) connError(code ErrCode, reason string) error {
+ fr.errDetail = errors.New(reason)
+ return ConnectionError(code)
+}
+
+// checkFrameOrder reports an error if f is an invalid frame to return
+// next from ReadFrame. Mostly it checks whether HEADERS and
+// CONTINUATION frames are contiguous.
+func (fr *Framer) checkFrameOrder(f Frame) error {
+ last := fr.lastFrame
+ fr.lastFrame = f
+ if fr.AllowIllegalReads {
+ return nil
+ }
+
+ fh := f.Header()
+ if fr.lastHeaderStream != 0 {
+ if fh.Type != FrameContinuation {
+ return fr.connError(ErrCodeProtocol,
+ fmt.Sprintf("got %s for stream %d; expected CONTINUATION following %s for stream %d",
+ fh.Type, fh.StreamID,
+ last.Header().Type, fr.lastHeaderStream))
+ }
+ if fh.StreamID != fr.lastHeaderStream {
+ return fr.connError(ErrCodeProtocol,
+ fmt.Sprintf("got CONTINUATION for stream %d; expected stream %d",
+ fh.StreamID, fr.lastHeaderStream))
+ }
+ } else if fh.Type == FrameContinuation {
+ return fr.connError(ErrCodeProtocol, fmt.Sprintf("unexpected CONTINUATION for stream %d", fh.StreamID))
+ }
+
+ switch fh.Type {
+ case FrameHeaders, FrameContinuation:
+ if fh.Flags.Has(FlagHeadersEndHeaders) {
+ fr.lastHeaderStream = 0
+ } else {
+ fr.lastHeaderStream = fh.StreamID
+ }
+ }
+
+ return nil
+}
+
+// A DataFrame conveys arbitrary, variable-length sequences of octets
+// associated with a stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.1
+type DataFrame struct {
+ FrameHeader
+ data []byte
+}
+
+func (f *DataFrame) StreamEnded() bool {
+ return f.FrameHeader.Flags.Has(FlagDataEndStream)
+}
+
+// Data returns the frame's data octets, not including any padding
+// size byte or padding suffix bytes.
+// The caller must not retain the returned memory past the next
+// call to ReadFrame.
+func (f *DataFrame) Data() []byte {
+ f.checkValid()
+ return f.data
+}
+
+func parseDataFrame(fc *frameCache, fh FrameHeader, payload []byte) (Frame, error) {
+ if fh.StreamID == 0 {
+ // DATA frames MUST be associated with a stream. If a
+ // DATA frame is received whose stream identifier
+ // field is 0x0, the recipient MUST respond with a
+ // connection error (Section 5.4.1) of type
+ // PROTOCOL_ERROR.
+ return nil, connError{ErrCodeProtocol, "DATA frame with stream ID 0"}
+ }
+ f := fc.getDataFrame()
+ f.FrameHeader = fh
+
+ var padSize byte
+ if fh.Flags.Has(FlagDataPadded) {
+ var err error
+ payload, padSize, err = readByte(payload)
+ if err != nil {
+ return nil, err
+ }
+ }
+ if int(padSize) > len(payload) {
+ // If the length of the padding is greater than the
+ // length of the frame payload, the recipient MUST
+ // treat this as a connection error.
+ // Filed: https://github.com/http2/http2-spec/issues/610
+ return nil, connError{ErrCodeProtocol, "pad size larger than data payload"}
+ }
+ f.data = payload[:len(payload)-int(padSize)]
+ return f, nil
+}
+
+var (
+ errStreamID = errors.New("invalid stream ID")
+ errDepStreamID = errors.New("invalid dependent stream ID")
+ errPadLength = errors.New("pad length too large")
+ errPadBytes = errors.New("padding bytes must all be zeros unless AllowIllegalWrites is enabled")
+)
+
+func validStreamIDOrZero(streamID uint32) bool {
+ return streamID&(1<<31) == 0
+}
+
+func validStreamID(streamID uint32) bool {
+ return streamID != 0 && streamID&(1<<31) == 0
+}
+
+// WriteData writes a DATA frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility not to violate the maximum frame size
+// and to not call other Write methods concurrently.
+func (f *Framer) WriteData(streamID uint32, endStream bool, data []byte) error {
+ return f.WriteDataPadded(streamID, endStream, data, nil)
+}
+
+// WriteData writes a DATA frame with optional padding.
+//
+// If pad is nil, the padding bit is not sent.
+// The length of pad must not exceed 255 bytes.
+// The bytes of pad must all be zero, unless f.AllowIllegalWrites is set.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility not to violate the maximum frame size
+// and to not call other Write methods concurrently.
+func (f *Framer) WriteDataPadded(streamID uint32, endStream bool, data, pad []byte) error {
+ if !validStreamID(streamID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ if len(pad) > 0 {
+ if len(pad) > 255 {
+ return errPadLength
+ }
+ if !f.AllowIllegalWrites {
+ for _, b := range pad {
+ if b != 0 {
+ // "Padding octets MUST be set to zero when sending."
+ return errPadBytes
+ }
+ }
+ }
+ }
+ var flags Flags
+ if endStream {
+ flags |= FlagDataEndStream
+ }
+ if pad != nil {
+ flags |= FlagDataPadded
+ }
+ f.startWrite(FrameData, flags, streamID)
+ if pad != nil {
+ f.wbuf = append(f.wbuf, byte(len(pad)))
+ }
+ f.wbuf = append(f.wbuf, data...)
+ f.wbuf = append(f.wbuf, pad...)
+ return f.endWrite()
+}
+
+// A SettingsFrame conveys configuration parameters that affect how
+// endpoints communicate, such as preferences and constraints on peer
+// behavior.
+//
+// See http://http2.github.io/http2-spec/#SETTINGS
+type SettingsFrame struct {
+ FrameHeader
+ p []byte
+}
+
+func parseSettingsFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+ if fh.Flags.Has(FlagSettingsAck) && fh.Length > 0 {
+ // When this (ACK 0x1) bit is set, the payload of the
+ // SETTINGS frame MUST be empty. Receipt of a
+ // SETTINGS frame with the ACK flag set and a length
+ // field value other than 0 MUST be treated as a
+ // connection error (Section 5.4.1) of type
+ // FRAME_SIZE_ERROR.
+ return nil, ConnectionError(ErrCodeFrameSize)
+ }
+ if fh.StreamID != 0 {
+ // SETTINGS frames always apply to a connection,
+ // never a single stream. The stream identifier for a
+ // SETTINGS frame MUST be zero (0x0). If an endpoint
+ // receives a SETTINGS frame whose stream identifier
+ // field is anything other than 0x0, the endpoint MUST
+ // respond with a connection error (Section 5.4.1) of
+ // type PROTOCOL_ERROR.
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ if len(p)%6 != 0 {
+ // Expecting even number of 6 byte settings.
+ return nil, ConnectionError(ErrCodeFrameSize)
+ }
+ f := &SettingsFrame{FrameHeader: fh, p: p}
+ if v, ok := f.Value(SettingInitialWindowSize); ok && v > (1<<31)-1 {
+ // Values above the maximum flow control window size of 2^31 - 1 MUST
+ // be treated as a connection error (Section 5.4.1) of type
+ // FLOW_CONTROL_ERROR.
+ return nil, ConnectionError(ErrCodeFlowControl)
+ }
+ return f, nil
+}
+
+func (f *SettingsFrame) IsAck() bool {
+ return f.FrameHeader.Flags.Has(FlagSettingsAck)
+}
+
+func (f *SettingsFrame) Value(id SettingID) (v uint32, ok bool) {
+ f.checkValid()
+ for i := 0; i < f.NumSettings(); i++ {
+ if s := f.Setting(i); s.ID == id {
+ return s.Val, true
+ }
+ }
+ return 0, false
+}
+
+// Setting returns the setting from the frame at the given 0-based index.
+// The index must be >= 0 and less than f.NumSettings().
+func (f *SettingsFrame) Setting(i int) Setting {
+ buf := f.p
+ return Setting{
+ ID: SettingID(binary.BigEndian.Uint16(buf[i*6 : i*6+2])),
+ Val: binary.BigEndian.Uint32(buf[i*6+2 : i*6+6]),
+ }
+}
+
+func (f *SettingsFrame) NumSettings() int { return len(f.p) / 6 }
+
+// HasDuplicates reports whether f contains any duplicate setting IDs.
+func (f *SettingsFrame) HasDuplicates() bool {
+ num := f.NumSettings()
+ if num == 0 {
+ return false
+ }
+ // If it's small enough (the common case), just do the n^2
+ // thing and avoid a map allocation.
+ if num < 10 {
+ for i := 0; i < num; i++ {
+ idi := f.Setting(i).ID
+ for j := i + 1; j < num; j++ {
+ idj := f.Setting(j).ID
+ if idi == idj {
+ return true
+ }
+ }
+ }
+ return false
+ }
+ seen := map[SettingID]bool{}
+ for i := 0; i < num; i++ {
+ id := f.Setting(i).ID
+ if seen[id] {
+ return true
+ }
+ seen[id] = true
+ }
+ return false
+}
+
+// ForeachSetting runs fn for each setting.
+// It stops and returns the first error.
+func (f *SettingsFrame) ForeachSetting(fn func(Setting) error) error {
+ f.checkValid()
+ for i := 0; i < f.NumSettings(); i++ {
+ if err := fn(f.Setting(i)); err != nil {
+ return err
+ }
+ }
+ return nil
+}
+
+// WriteSettings writes a SETTINGS frame with zero or more settings
+// specified and the ACK bit not set.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteSettings(settings ...Setting) error {
+ f.startWrite(FrameSettings, 0, 0)
+ for _, s := range settings {
+ f.writeUint16(uint16(s.ID))
+ f.writeUint32(s.Val)
+ }
+ return f.endWrite()
+}
+
+// WriteSettingsAck writes an empty SETTINGS frame with the ACK bit set.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteSettingsAck() error {
+ f.startWrite(FrameSettings, FlagSettingsAck, 0)
+ return f.endWrite()
+}
+
+// A PingFrame is a mechanism for measuring a minimal round trip time
+// from the sender, as well as determining whether an idle connection
+// is still functional.
+// See http://http2.github.io/http2-spec/#rfc.section.6.7
+type PingFrame struct {
+ FrameHeader
+ Data [8]byte
+}
+
+func (f *PingFrame) IsAck() bool { return f.Flags.Has(FlagPingAck) }
+
+func parsePingFrame(_ *frameCache, fh FrameHeader, payload []byte) (Frame, error) {
+ if len(payload) != 8 {
+ return nil, ConnectionError(ErrCodeFrameSize)
+ }
+ if fh.StreamID != 0 {
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ f := &PingFrame{FrameHeader: fh}
+ copy(f.Data[:], payload)
+ return f, nil
+}
+
+func (f *Framer) WritePing(ack bool, data [8]byte) error {
+ var flags Flags
+ if ack {
+ flags = FlagPingAck
+ }
+ f.startWrite(FramePing, flags, 0)
+ f.writeBytes(data[:])
+ return f.endWrite()
+}
+
+// A GoAwayFrame informs the remote peer to stop creating streams on this connection.
+// See http://http2.github.io/http2-spec/#rfc.section.6.8
+type GoAwayFrame struct {
+ FrameHeader
+ LastStreamID uint32
+ ErrCode ErrCode
+ debugData []byte
+}
+
+// DebugData returns any debug data in the GOAWAY frame. Its contents
+// are not defined.
+// The caller must not retain the returned memory past the next
+// call to ReadFrame.
+func (f *GoAwayFrame) DebugData() []byte {
+ f.checkValid()
+ return f.debugData
+}
+
+func parseGoAwayFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+ if fh.StreamID != 0 {
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ if len(p) < 8 {
+ return nil, ConnectionError(ErrCodeFrameSize)
+ }
+ return &GoAwayFrame{
+ FrameHeader: fh,
+ LastStreamID: binary.BigEndian.Uint32(p[:4]) & (1<<31 - 1),
+ ErrCode: ErrCode(binary.BigEndian.Uint32(p[4:8])),
+ debugData: p[8:],
+ }, nil
+}
+
+func (f *Framer) WriteGoAway(maxStreamID uint32, code ErrCode, debugData []byte) error {
+ f.startWrite(FrameGoAway, 0, 0)
+ f.writeUint32(maxStreamID & (1<<31 - 1))
+ f.writeUint32(uint32(code))
+ f.writeBytes(debugData)
+ return f.endWrite()
+}
+
+// An UnknownFrame is the frame type returned when the frame type is unknown
+// or no specific frame type parser exists.
+type UnknownFrame struct {
+ FrameHeader
+ p []byte
+}
+
+// Payload returns the frame's payload (after the header). It is not
+// valid to call this method after a subsequent call to
+// Framer.ReadFrame, nor is it valid to retain the returned slice.
+// The memory is owned by the Framer and is invalidated when the next
+// frame is read.
+func (f *UnknownFrame) Payload() []byte {
+ f.checkValid()
+ return f.p
+}
+
+func parseUnknownFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+ return &UnknownFrame{fh, p}, nil
+}
+
+// A WindowUpdateFrame is used to implement flow control.
+// See http://http2.github.io/http2-spec/#rfc.section.6.9
+type WindowUpdateFrame struct {
+ FrameHeader
+ Increment uint32 // never read with high bit set
+}
+
+func parseWindowUpdateFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+ if len(p) != 4 {
+ return nil, ConnectionError(ErrCodeFrameSize)
+ }
+ inc := binary.BigEndian.Uint32(p[:4]) & 0x7fffffff // mask off high reserved bit
+ if inc == 0 {
+ // A receiver MUST treat the receipt of a
+ // WINDOW_UPDATE frame with an flow control window
+ // increment of 0 as a stream error (Section 5.4.2) of
+ // type PROTOCOL_ERROR; errors on the connection flow
+ // control window MUST be treated as a connection
+ // error (Section 5.4.1).
+ if fh.StreamID == 0 {
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ return nil, streamError(fh.StreamID, ErrCodeProtocol)
+ }
+ return &WindowUpdateFrame{
+ FrameHeader: fh,
+ Increment: inc,
+ }, nil
+}
+
+// WriteWindowUpdate writes a WINDOW_UPDATE frame.
+// The increment value must be between 1 and 2,147,483,647, inclusive.
+// If the Stream ID is zero, the window update applies to the
+// connection as a whole.
+func (f *Framer) WriteWindowUpdate(streamID, incr uint32) error {
+ // "The legal range for the increment to the flow control window is 1 to 2^31-1 (2,147,483,647) octets."
+ if (incr < 1 || incr > 2147483647) && !f.AllowIllegalWrites {
+ return errors.New("illegal window increment value")
+ }
+ f.startWrite(FrameWindowUpdate, 0, streamID)
+ f.writeUint32(incr)
+ return f.endWrite()
+}
+
+// A HeadersFrame is used to open a stream and additionally carries a
+// header block fragment.
+type HeadersFrame struct {
+ FrameHeader
+
+ // Priority is set if FlagHeadersPriority is set in the FrameHeader.
+ Priority PriorityParam
+
+ headerFragBuf []byte // not owned
+}
+
+func (f *HeadersFrame) HeaderBlockFragment() []byte {
+ f.checkValid()
+ return f.headerFragBuf
+}
+
+func (f *HeadersFrame) HeadersEnded() bool {
+ return f.FrameHeader.Flags.Has(FlagHeadersEndHeaders)
+}
+
+func (f *HeadersFrame) StreamEnded() bool {
+ return f.FrameHeader.Flags.Has(FlagHeadersEndStream)
+}
+
+func (f *HeadersFrame) HasPriority() bool {
+ return f.FrameHeader.Flags.Has(FlagHeadersPriority)
+}
+
+func parseHeadersFrame(_ *frameCache, fh FrameHeader, p []byte) (_ Frame, err error) {
+ hf := &HeadersFrame{
+ FrameHeader: fh,
+ }
+ if fh.StreamID == 0 {
+ // HEADERS frames MUST be associated with a stream. If a HEADERS frame
+ // is received whose stream identifier field is 0x0, the recipient MUST
+ // respond with a connection error (Section 5.4.1) of type
+ // PROTOCOL_ERROR.
+ return nil, connError{ErrCodeProtocol, "HEADERS frame with stream ID 0"}
+ }
+ var padLength uint8
+ if fh.Flags.Has(FlagHeadersPadded) {
+ if p, padLength, err = readByte(p); err != nil {
+ return
+ }
+ }
+ if fh.Flags.Has(FlagHeadersPriority) {
+ var v uint32
+ p, v, err = readUint32(p)
+ if err != nil {
+ return nil, err
+ }
+ hf.Priority.StreamDep = v & 0x7fffffff
+ hf.Priority.Exclusive = (v != hf.Priority.StreamDep) // high bit was set
+ p, hf.Priority.Weight, err = readByte(p)
+ if err != nil {
+ return nil, err
+ }
+ }
+ if len(p)-int(padLength) <= 0 {
+ return nil, streamError(fh.StreamID, ErrCodeProtocol)
+ }
+ hf.headerFragBuf = p[:len(p)-int(padLength)]
+ return hf, nil
+}
+
+// HeadersFrameParam are the parameters for writing a HEADERS frame.
+type HeadersFrameParam struct {
+ // StreamID is the required Stream ID to initiate.
+ StreamID uint32
+ // BlockFragment is part (or all) of a Header Block.
+ BlockFragment []byte
+
+ // EndStream indicates that the header block is the last that
+ // the endpoint will send for the identified stream. Setting
+ // this flag causes the stream to enter one of "half closed"
+ // states.
+ EndStream bool
+
+ // EndHeaders indicates that this frame contains an entire
+ // header block and is not followed by any
+ // CONTINUATION frames.
+ EndHeaders bool
+
+ // PadLength is the optional number of bytes of zeros to add
+ // to this frame.
+ PadLength uint8
+
+ // Priority, if non-zero, includes stream priority information
+ // in the HEADER frame.
+ Priority PriorityParam
+}
+
+// WriteHeaders writes a single HEADERS frame.
+//
+// This is a low-level header writing method. Encoding headers and
+// splitting them into any necessary CONTINUATION frames is handled
+// elsewhere.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteHeaders(p HeadersFrameParam) error {
+ if !validStreamID(p.StreamID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ var flags Flags
+ if p.PadLength != 0 {
+ flags |= FlagHeadersPadded
+ }
+ if p.EndStream {
+ flags |= FlagHeadersEndStream
+ }
+ if p.EndHeaders {
+ flags |= FlagHeadersEndHeaders
+ }
+ if !p.Priority.IsZero() {
+ flags |= FlagHeadersPriority
+ }
+ f.startWrite(FrameHeaders, flags, p.StreamID)
+ if p.PadLength != 0 {
+ f.writeByte(p.PadLength)
+ }
+ if !p.Priority.IsZero() {
+ v := p.Priority.StreamDep
+ if !validStreamIDOrZero(v) && !f.AllowIllegalWrites {
+ return errDepStreamID
+ }
+ if p.Priority.Exclusive {
+ v |= 1 << 31
+ }
+ f.writeUint32(v)
+ f.writeByte(p.Priority.Weight)
+ }
+ f.wbuf = append(f.wbuf, p.BlockFragment...)
+ f.wbuf = append(f.wbuf, padZeros[:p.PadLength]...)
+ return f.endWrite()
+}
+
+// A PriorityFrame specifies the sender-advised priority of a stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.3
+type PriorityFrame struct {
+ FrameHeader
+ PriorityParam
+}
+
+// PriorityParam are the stream prioritzation parameters.
+type PriorityParam struct {
+ // StreamDep is a 31-bit stream identifier for the
+ // stream that this stream depends on. Zero means no
+ // dependency.
+ StreamDep uint32
+
+ // Exclusive is whether the dependency is exclusive.
+ Exclusive bool
+
+ // Weight is the stream's zero-indexed weight. It should be
+ // set together with StreamDep, or neither should be set. Per
+ // the spec, "Add one to the value to obtain a weight between
+ // 1 and 256."
+ Weight uint8
+}
+
+func (p PriorityParam) IsZero() bool {
+ return p == PriorityParam{}
+}
+
+func parsePriorityFrame(_ *frameCache, fh FrameHeader, payload []byte) (Frame, error) {
+ if fh.StreamID == 0 {
+ return nil, connError{ErrCodeProtocol, "PRIORITY frame with stream ID 0"}
+ }
+ if len(payload) != 5 {
+ return nil, connError{ErrCodeFrameSize, fmt.Sprintf("PRIORITY frame payload size was %d; want 5", len(payload))}
+ }
+ v := binary.BigEndian.Uint32(payload[:4])
+ streamID := v & 0x7fffffff // mask off high bit
+ return &PriorityFrame{
+ FrameHeader: fh,
+ PriorityParam: PriorityParam{
+ Weight: payload[4],
+ StreamDep: streamID,
+ Exclusive: streamID != v, // was high bit set?
+ },
+ }, nil
+}
+
+// WritePriority writes a PRIORITY frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WritePriority(streamID uint32, p PriorityParam) error {
+ if !validStreamID(streamID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ if !validStreamIDOrZero(p.StreamDep) {
+ return errDepStreamID
+ }
+ f.startWrite(FramePriority, 0, streamID)
+ v := p.StreamDep
+ if p.Exclusive {
+ v |= 1 << 31
+ }
+ f.writeUint32(v)
+ f.writeByte(p.Weight)
+ return f.endWrite()
+}
+
+// A RSTStreamFrame allows for abnormal termination of a stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.4
+type RSTStreamFrame struct {
+ FrameHeader
+ ErrCode ErrCode
+}
+
+func parseRSTStreamFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+ if len(p) != 4 {
+ return nil, ConnectionError(ErrCodeFrameSize)
+ }
+ if fh.StreamID == 0 {
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ return &RSTStreamFrame{fh, ErrCode(binary.BigEndian.Uint32(p[:4]))}, nil
+}
+
+// WriteRSTStream writes a RST_STREAM frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteRSTStream(streamID uint32, code ErrCode) error {
+ if !validStreamID(streamID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ f.startWrite(FrameRSTStream, 0, streamID)
+ f.writeUint32(uint32(code))
+ return f.endWrite()
+}
+
+// A ContinuationFrame is used to continue a sequence of header block fragments.
+// See http://http2.github.io/http2-spec/#rfc.section.6.10
+type ContinuationFrame struct {
+ FrameHeader
+ headerFragBuf []byte
+}
+
+func parseContinuationFrame(_ *frameCache, fh FrameHeader, p []byte) (Frame, error) {
+ if fh.StreamID == 0 {
+ return nil, connError{ErrCodeProtocol, "CONTINUATION frame with stream ID 0"}
+ }
+ return &ContinuationFrame{fh, p}, nil
+}
+
+func (f *ContinuationFrame) HeaderBlockFragment() []byte {
+ f.checkValid()
+ return f.headerFragBuf
+}
+
+func (f *ContinuationFrame) HeadersEnded() bool {
+ return f.FrameHeader.Flags.Has(FlagContinuationEndHeaders)
+}
+
+// WriteContinuation writes a CONTINUATION frame.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WriteContinuation(streamID uint32, endHeaders bool, headerBlockFragment []byte) error {
+ if !validStreamID(streamID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ var flags Flags
+ if endHeaders {
+ flags |= FlagContinuationEndHeaders
+ }
+ f.startWrite(FrameContinuation, flags, streamID)
+ f.wbuf = append(f.wbuf, headerBlockFragment...)
+ return f.endWrite()
+}
+
+// A PushPromiseFrame is used to initiate a server stream.
+// See http://http2.github.io/http2-spec/#rfc.section.6.6
+type PushPromiseFrame struct {
+ FrameHeader
+ PromiseID uint32
+ headerFragBuf []byte // not owned
+}
+
+func (f *PushPromiseFrame) HeaderBlockFragment() []byte {
+ f.checkValid()
+ return f.headerFragBuf
+}
+
+func (f *PushPromiseFrame) HeadersEnded() bool {
+ return f.FrameHeader.Flags.Has(FlagPushPromiseEndHeaders)
+}
+
+func parsePushPromise(_ *frameCache, fh FrameHeader, p []byte) (_ Frame, err error) {
+ pp := &PushPromiseFrame{
+ FrameHeader: fh,
+ }
+ if pp.StreamID == 0 {
+ // PUSH_PROMISE frames MUST be associated with an existing,
+ // peer-initiated stream. The stream identifier of a
+ // PUSH_PROMISE frame indicates the stream it is associated
+ // with. If the stream identifier field specifies the value
+ // 0x0, a recipient MUST respond with a connection error
+ // (Section 5.4.1) of type PROTOCOL_ERROR.
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ // The PUSH_PROMISE frame includes optional padding.
+ // Padding fields and flags are identical to those defined for DATA frames
+ var padLength uint8
+ if fh.Flags.Has(FlagPushPromisePadded) {
+ if p, padLength, err = readByte(p); err != nil {
+ return
+ }
+ }
+
+ p, pp.PromiseID, err = readUint32(p)
+ if err != nil {
+ return
+ }
+ pp.PromiseID = pp.PromiseID & (1<<31 - 1)
+
+ if int(padLength) > len(p) {
+ // like the DATA frame, error out if padding is longer than the body.
+ return nil, ConnectionError(ErrCodeProtocol)
+ }
+ pp.headerFragBuf = p[:len(p)-int(padLength)]
+ return pp, nil
+}
+
+// PushPromiseParam are the parameters for writing a PUSH_PROMISE frame.
+type PushPromiseParam struct {
+ // StreamID is the required Stream ID to initiate.
+ StreamID uint32
+
+ // PromiseID is the required Stream ID which this
+ // Push Promises
+ PromiseID uint32
+
+ // BlockFragment is part (or all) of a Header Block.
+ BlockFragment []byte
+
+ // EndHeaders indicates that this frame contains an entire
+ // header block and is not followed by any
+ // CONTINUATION frames.
+ EndHeaders bool
+
+ // PadLength is the optional number of bytes of zeros to add
+ // to this frame.
+ PadLength uint8
+}
+
+// WritePushPromise writes a single PushPromise Frame.
+//
+// As with Header Frames, This is the low level call for writing
+// individual frames. Continuation frames are handled elsewhere.
+//
+// It will perform exactly one Write to the underlying Writer.
+// It is the caller's responsibility to not call other Write methods concurrently.
+func (f *Framer) WritePushPromise(p PushPromiseParam) error {
+ if !validStreamID(p.StreamID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ var flags Flags
+ if p.PadLength != 0 {
+ flags |= FlagPushPromisePadded
+ }
+ if p.EndHeaders {
+ flags |= FlagPushPromiseEndHeaders
+ }
+ f.startWrite(FramePushPromise, flags, p.StreamID)
+ if p.PadLength != 0 {
+ f.writeByte(p.PadLength)
+ }
+ if !validStreamID(p.PromiseID) && !f.AllowIllegalWrites {
+ return errStreamID
+ }
+ f.writeUint32(p.PromiseID)
+ f.wbuf = append(f.wbuf, p.BlockFragment...)
+ f.wbuf = append(f.wbuf, padZeros[:p.PadLength]...)
+ return f.endWrite()
+}
+
+// WriteRawFrame writes a raw frame. This can be used to write
+// extension frames unknown to this package.
+func (f *Framer) WriteRawFrame(t FrameType, flags Flags, streamID uint32, payload []byte) error {
+ f.startWrite(t, flags, streamID)
+ f.writeBytes(payload)
+ return f.endWrite()
+}
+
+func readByte(p []byte) (remain []byte, b byte, err error) {
+ if len(p) == 0 {
+ return nil, 0, io.ErrUnexpectedEOF
+ }
+ return p[1:], p[0], nil
+}
+
+func readUint32(p []byte) (remain []byte, v uint32, err error) {
+ if len(p) < 4 {
+ return nil, 0, io.ErrUnexpectedEOF
+ }
+ return p[4:], binary.BigEndian.Uint32(p[:4]), nil
+}
+
+type streamEnder interface {
+ StreamEnded() bool
+}
+
+type headersEnder interface {
+ HeadersEnded() bool
+}
+
+type headersOrContinuation interface {
+ headersEnder
+ HeaderBlockFragment() []byte
+}
+
+// A MetaHeadersFrame is the representation of one HEADERS frame and
+// zero or more contiguous CONTINUATION frames and the decoding of
+// their HPACK-encoded contents.
+//
+// This type of frame does not appear on the wire and is only returned
+// by the Framer when Framer.ReadMetaHeaders is set.
+type MetaHeadersFrame struct {
+ *HeadersFrame
+
+ // Fields are the fields contained in the HEADERS and
+ // CONTINUATION frames. The underlying slice is owned by the
+ // Framer and must not be retained after the next call to
+ // ReadFrame.
+ //
+ // Fields are guaranteed to be in the correct http2 order and
+ // not have unknown pseudo header fields or invalid header
+ // field names or values. Required pseudo header fields may be
+ // missing, however. Use the MetaHeadersFrame.Pseudo accessor
+ // method access pseudo headers.
+ Fields []hpack.HeaderField
+
+ // Truncated is whether the max header list size limit was hit
+ // and Fields is incomplete. The hpack decoder state is still
+ // valid, however.
+ Truncated bool
+}
+
+// PseudoValue returns the given pseudo header field's value.
+// The provided pseudo field should not contain the leading colon.
+func (mh *MetaHeadersFrame) PseudoValue(pseudo string) string {
+ for _, hf := range mh.Fields {
+ if !hf.IsPseudo() {
+ return ""
+ }
+ if hf.Name[1:] == pseudo {
+ return hf.Value
+ }
+ }
+ return ""
+}
+
+// RegularFields returns the regular (non-pseudo) header fields of mh.
+// The caller does not own the returned slice.
+func (mh *MetaHeadersFrame) RegularFields() []hpack.HeaderField {
+ for i, hf := range mh.Fields {
+ if !hf.IsPseudo() {
+ return mh.Fields[i:]
+ }
+ }
+ return nil
+}
+
+// PseudoFields returns the pseudo header fields of mh.
+// The caller does not own the returned slice.
+func (mh *MetaHeadersFrame) PseudoFields() []hpack.HeaderField {
+ for i, hf := range mh.Fields {
+ if !hf.IsPseudo() {
+ return mh.Fields[:i]
+ }
+ }
+ return mh.Fields
+}
+
+func (mh *MetaHeadersFrame) checkPseudos() error {
+ var isRequest, isResponse bool
+ pf := mh.PseudoFields()
+ for i, hf := range pf {
+ switch hf.Name {
+ case ":method", ":path", ":scheme", ":authority":
+ isRequest = true
+ case ":status":
+ isResponse = true
+ default:
+ return pseudoHeaderError(hf.Name)
+ }
+ // Check for duplicates.
+ // This would be a bad algorithm, but N is 4.
+ // And this doesn't allocate.
+ for _, hf2 := range pf[:i] {
+ if hf.Name == hf2.Name {
+ return duplicatePseudoHeaderError(hf.Name)
+ }
+ }
+ }
+ if isRequest && isResponse {
+ return errMixPseudoHeaderTypes
+ }
+ return nil
+}
+
+func (fr *Framer) maxHeaderStringLen() int {
+ v := fr.maxHeaderListSize()
+ if uint32(int(v)) == v {
+ return int(v)
+ }
+ // They had a crazy big number for MaxHeaderBytes anyway,
+ // so give them unlimited header lengths:
+ return 0
+}
+
+// readMetaFrame returns 0 or more CONTINUATION frames from fr and
+// merge them into the provided hf and returns a MetaHeadersFrame
+// with the decoded hpack values.
+func (fr *Framer) readMetaFrame(hf *HeadersFrame) (*MetaHeadersFrame, error) {
+ if fr.AllowIllegalReads {
+ return nil, errors.New("illegal use of AllowIllegalReads with ReadMetaHeaders")
+ }
+ mh := &MetaHeadersFrame{
+ HeadersFrame: hf,
+ }
+ var remainSize = fr.maxHeaderListSize()
+ var sawRegular bool
+
+ var invalid error // pseudo header field errors
+ hdec := fr.ReadMetaHeaders
+ hdec.SetEmitEnabled(true)
+ hdec.SetMaxStringLength(fr.maxHeaderStringLen())
+ hdec.SetEmitFunc(func(hf hpack.HeaderField) {
+ if VerboseLogs && fr.logReads {
+ fr.debugReadLoggerf("http2: decoded hpack field %+v", hf)
+ }
+ if !httpguts.ValidHeaderFieldValue(hf.Value) {
+ invalid = headerFieldValueError(hf.Value)
+ }
+ isPseudo := strings.HasPrefix(hf.Name, ":")
+ if isPseudo {
+ if sawRegular {
+ invalid = errPseudoAfterRegular
+ }
+ } else {
+ sawRegular = true
+ if !validWireHeaderFieldName(hf.Name) {
+ invalid = headerFieldNameError(hf.Name)
+ }
+ }
+
+ if invalid != nil {
+ hdec.SetEmitEnabled(false)
+ return
+ }
+
+ size := hf.Size()
+ if size > remainSize {
+ hdec.SetEmitEnabled(false)
+ mh.Truncated = true
+ return
+ }
+ remainSize -= size
+
+ mh.Fields = append(mh.Fields, hf)
+ })
+ // Lose reference to MetaHeadersFrame:
+ defer hdec.SetEmitFunc(func(hf hpack.HeaderField) {})
+
+ var hc headersOrContinuation = hf
+ for {
+ frag := hc.HeaderBlockFragment()
+ if _, err := hdec.Write(frag); err != nil {
+ return nil, ConnectionError(ErrCodeCompression)
+ }
+
+ if hc.HeadersEnded() {
+ break
+ }
+ if f, err := fr.ReadFrame(); err != nil {
+ return nil, err
+ } else {
+ hc = f.(*ContinuationFrame) // guaranteed by checkFrameOrder
+ }
+ }
+
+ mh.HeadersFrame.headerFragBuf = nil
+ mh.HeadersFrame.invalidate()
+
+ if err := hdec.Close(); err != nil {
+ return nil, ConnectionError(ErrCodeCompression)
+ }
+ if invalid != nil {
+ fr.errDetail = invalid
+ if VerboseLogs {
+ log.Printf("http2: invalid header: %v", invalid)
+ }
+ return nil, StreamError{mh.StreamID, ErrCodeProtocol, invalid}
+ }
+ if err := mh.checkPseudos(); err != nil {
+ fr.errDetail = err
+ if VerboseLogs {
+ log.Printf("http2: invalid pseudo headers: %v", err)
+ }
+ return nil, StreamError{mh.StreamID, ErrCodeProtocol, err}
+ }
+ return mh, nil
+}
+
+func summarizeFrame(f Frame) string {
+ var buf bytes.Buffer
+ f.Header().writeDebug(&buf)
+ switch f := f.(type) {
+ case *SettingsFrame:
+ n := 0
+ f.ForeachSetting(func(s Setting) error {
+ n++
+ if n == 1 {
+ buf.WriteString(", settings:")
+ }
+ fmt.Fprintf(&buf, " %v=%v,", s.ID, s.Val)
+ return nil
+ })
+ if n > 0 {
+ buf.Truncate(buf.Len() - 1) // remove trailing comma
+ }
+ case *DataFrame:
+ data := f.Data()
+ const max = 256
+ if len(data) > max {
+ data = data[:max]
+ }
+ fmt.Fprintf(&buf, " data=%q", data)
+ if len(f.Data()) > max {
+ fmt.Fprintf(&buf, " (%d bytes omitted)", len(f.Data())-max)
+ }
+ case *WindowUpdateFrame:
+ if f.StreamID == 0 {
+ buf.WriteString(" (conn)")
+ }
+ fmt.Fprintf(&buf, " incr=%v", f.Increment)
+ case *PingFrame:
+ fmt.Fprintf(&buf, " ping=%q", f.Data[:])
+ case *GoAwayFrame:
+ fmt.Fprintf(&buf, " LastStreamID=%v ErrCode=%v Debug=%q",
+ f.LastStreamID, f.ErrCode, f.debugData)
+ case *RSTStreamFrame:
+ fmt.Fprintf(&buf, " ErrCode=%v", f.ErrCode)
+ }
+ return buf.String()
+}
diff --git a/vendor/golang.org/x/net/http2/go111.go b/vendor/golang.org/x/net/http2/go111.go
new file mode 100644
index 0000000..3a13101
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/go111.go
@@ -0,0 +1,29 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build go1.11
+
+package http2
+
+import (
+ "net/http/httptrace"
+ "net/textproto"
+)
+
+func traceHasWroteHeaderField(trace *httptrace.ClientTrace) bool {
+ return trace != nil && trace.WroteHeaderField != nil
+}
+
+func traceWroteHeaderField(trace *httptrace.ClientTrace, k, v string) {
+ if trace != nil && trace.WroteHeaderField != nil {
+ trace.WroteHeaderField(k, []string{v})
+ }
+}
+
+func traceGot1xxResponseFunc(trace *httptrace.ClientTrace) func(int, textproto.MIMEHeader) error {
+ if trace != nil {
+ return trace.Got1xxResponse
+ }
+ return nil
+}
diff --git a/vendor/golang.org/x/net/http2/gotrack.go b/vendor/golang.org/x/net/http2/gotrack.go
new file mode 100644
index 0000000..9933c9f
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/gotrack.go
@@ -0,0 +1,170 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Defensive debug-only utility to track that functions run on the
+// goroutine that they're supposed to.
+
+package http2
+
+import (
+ "bytes"
+ "errors"
+ "fmt"
+ "os"
+ "runtime"
+ "strconv"
+ "sync"
+)
+
+var DebugGoroutines = os.Getenv("DEBUG_HTTP2_GOROUTINES") == "1"
+
+type goroutineLock uint64
+
+func newGoroutineLock() goroutineLock {
+ if !DebugGoroutines {
+ return 0
+ }
+ return goroutineLock(curGoroutineID())
+}
+
+func (g goroutineLock) check() {
+ if !DebugGoroutines {
+ return
+ }
+ if curGoroutineID() != uint64(g) {
+ panic("running on the wrong goroutine")
+ }
+}
+
+func (g goroutineLock) checkNotOn() {
+ if !DebugGoroutines {
+ return
+ }
+ if curGoroutineID() == uint64(g) {
+ panic("running on the wrong goroutine")
+ }
+}
+
+var goroutineSpace = []byte("goroutine ")
+
+func curGoroutineID() uint64 {
+ bp := littleBuf.Get().(*[]byte)
+ defer littleBuf.Put(bp)
+ b := *bp
+ b = b[:runtime.Stack(b, false)]
+ // Parse the 4707 out of "goroutine 4707 ["
+ b = bytes.TrimPrefix(b, goroutineSpace)
+ i := bytes.IndexByte(b, ' ')
+ if i < 0 {
+ panic(fmt.Sprintf("No space found in %q", b))
+ }
+ b = b[:i]
+ n, err := parseUintBytes(b, 10, 64)
+ if err != nil {
+ panic(fmt.Sprintf("Failed to parse goroutine ID out of %q: %v", b, err))
+ }
+ return n
+}
+
+var littleBuf = sync.Pool{
+ New: func() interface{} {
+ buf := make([]byte, 64)
+ return &buf
+ },
+}
+
+// parseUintBytes is like strconv.ParseUint, but using a []byte.
+func parseUintBytes(s []byte, base int, bitSize int) (n uint64, err error) {
+ var cutoff, maxVal uint64
+
+ if bitSize == 0 {
+ bitSize = int(strconv.IntSize)
+ }
+
+ s0 := s
+ switch {
+ case len(s) < 1:
+ err = strconv.ErrSyntax
+ goto Error
+
+ case 2 <= base && base <= 36:
+ // valid base; nothing to do
+
+ case base == 0:
+ // Look for octal, hex prefix.
+ switch {
+ case s[0] == '0' && len(s) > 1 && (s[1] == 'x' || s[1] == 'X'):
+ base = 16
+ s = s[2:]
+ if len(s) < 1 {
+ err = strconv.ErrSyntax
+ goto Error
+ }
+ case s[0] == '0':
+ base = 8
+ default:
+ base = 10
+ }
+
+ default:
+ err = errors.New("invalid base " + strconv.Itoa(base))
+ goto Error
+ }
+
+ n = 0
+ cutoff = cutoff64(base)
+ maxVal = 1<<uint(bitSize) - 1
+
+ for i := 0; i < len(s); i++ {
+ var v byte
+ d := s[i]
+ switch {
+ case '0' <= d && d <= '9':
+ v = d - '0'
+ case 'a' <= d && d <= 'z':
+ v = d - 'a' + 10
+ case 'A' <= d && d <= 'Z':
+ v = d - 'A' + 10
+ default:
+ n = 0
+ err = strconv.ErrSyntax
+ goto Error
+ }
+ if int(v) >= base {
+ n = 0
+ err = strconv.ErrSyntax
+ goto Error
+ }
+
+ if n >= cutoff {
+ // n*base overflows
+ n = 1<<64 - 1
+ err = strconv.ErrRange
+ goto Error
+ }
+ n *= uint64(base)
+
+ n1 := n + uint64(v)
+ if n1 < n || n1 > maxVal {
+ // n+v overflows
+ n = 1<<64 - 1
+ err = strconv.ErrRange
+ goto Error
+ }
+ n = n1
+ }
+
+ return n, nil
+
+Error:
+ return n, &strconv.NumError{Func: "ParseUint", Num: string(s0), Err: err}
+}
+
+// Return the first number n such that n*base >= 1<<64.
+func cutoff64(base int) uint64 {
+ if base < 2 {
+ return 0
+ }
+ return (1<<64-1)/uint64(base) + 1
+}
diff --git a/vendor/golang.org/x/net/http2/headermap.go b/vendor/golang.org/x/net/http2/headermap.go
new file mode 100644
index 0000000..c3ff3fa
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/headermap.go
@@ -0,0 +1,88 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "net/http"
+ "strings"
+ "sync"
+)
+
+var (
+ commonBuildOnce sync.Once
+ commonLowerHeader map[string]string // Go-Canonical-Case -> lower-case
+ commonCanonHeader map[string]string // lower-case -> Go-Canonical-Case
+)
+
+func buildCommonHeaderMapsOnce() {
+ commonBuildOnce.Do(buildCommonHeaderMaps)
+}
+
+func buildCommonHeaderMaps() {
+ common := []string{
+ "accept",
+ "accept-charset",
+ "accept-encoding",
+ "accept-language",
+ "accept-ranges",
+ "age",
+ "access-control-allow-origin",
+ "allow",
+ "authorization",
+ "cache-control",
+ "content-disposition",
+ "content-encoding",
+ "content-language",
+ "content-length",
+ "content-location",
+ "content-range",
+ "content-type",
+ "cookie",
+ "date",
+ "etag",
+ "expect",
+ "expires",
+ "from",
+ "host",
+ "if-match",
+ "if-modified-since",
+ "if-none-match",
+ "if-unmodified-since",
+ "last-modified",
+ "link",
+ "location",
+ "max-forwards",
+ "proxy-authenticate",
+ "proxy-authorization",
+ "range",
+ "referer",
+ "refresh",
+ "retry-after",
+ "server",
+ "set-cookie",
+ "strict-transport-security",
+ "trailer",
+ "transfer-encoding",
+ "user-agent",
+ "vary",
+ "via",
+ "www-authenticate",
+ }
+ commonLowerHeader = make(map[string]string, len(common))
+ commonCanonHeader = make(map[string]string, len(common))
+ for _, v := range common {
+ chk := http.CanonicalHeaderKey(v)
+ commonLowerHeader[chk] = v
+ commonCanonHeader[v] = chk
+ }
+}
+
+func lowerHeader(v string) string {
+ buildCommonHeaderMapsOnce()
+ if s, ok := commonLowerHeader[v]; ok {
+ return s
+ }
+ return strings.ToLower(v)
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/encode.go b/vendor/golang.org/x/net/http2/hpack/encode.go
new file mode 100644
index 0000000..1565cf2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/encode.go
@@ -0,0 +1,240 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+ "io"
+)
+
+const (
+ uint32Max = ^uint32(0)
+ initialHeaderTableSize = 4096
+)
+
+type Encoder struct {
+ dynTab dynamicTable
+ // minSize is the minimum table size set by
+ // SetMaxDynamicTableSize after the previous Header Table Size
+ // Update.
+ minSize uint32
+ // maxSizeLimit is the maximum table size this encoder
+ // supports. This will protect the encoder from too large
+ // size.
+ maxSizeLimit uint32
+ // tableSizeUpdate indicates whether "Header Table Size
+ // Update" is required.
+ tableSizeUpdate bool
+ w io.Writer
+ buf []byte
+}
+
+// NewEncoder returns a new Encoder which performs HPACK encoding. An
+// encoded data is written to w.
+func NewEncoder(w io.Writer) *Encoder {
+ e := &Encoder{
+ minSize: uint32Max,
+ maxSizeLimit: initialHeaderTableSize,
+ tableSizeUpdate: false,
+ w: w,
+ }
+ e.dynTab.table.init()
+ e.dynTab.setMaxSize(initialHeaderTableSize)
+ return e
+}
+
+// WriteField encodes f into a single Write to e's underlying Writer.
+// This function may also produce bytes for "Header Table Size Update"
+// if necessary. If produced, it is done before encoding f.
+func (e *Encoder) WriteField(f HeaderField) error {
+ e.buf = e.buf[:0]
+
+ if e.tableSizeUpdate {
+ e.tableSizeUpdate = false
+ if e.minSize < e.dynTab.maxSize {
+ e.buf = appendTableSize(e.buf, e.minSize)
+ }
+ e.minSize = uint32Max
+ e.buf = appendTableSize(e.buf, e.dynTab.maxSize)
+ }
+
+ idx, nameValueMatch := e.searchTable(f)
+ if nameValueMatch {
+ e.buf = appendIndexed(e.buf, idx)
+ } else {
+ indexing := e.shouldIndex(f)
+ if indexing {
+ e.dynTab.add(f)
+ }
+
+ if idx == 0 {
+ e.buf = appendNewName(e.buf, f, indexing)
+ } else {
+ e.buf = appendIndexedName(e.buf, f, idx, indexing)
+ }
+ }
+ n, err := e.w.Write(e.buf)
+ if err == nil && n != len(e.buf) {
+ err = io.ErrShortWrite
+ }
+ return err
+}
+
+// searchTable searches f in both stable and dynamic header tables.
+// The static header table is searched first. Only when there is no
+// exact match for both name and value, the dynamic header table is
+// then searched. If there is no match, i is 0. If both name and value
+// match, i is the matched index and nameValueMatch becomes true. If
+// only name matches, i points to that index and nameValueMatch
+// becomes false.
+func (e *Encoder) searchTable(f HeaderField) (i uint64, nameValueMatch bool) {
+ i, nameValueMatch = staticTable.search(f)
+ if nameValueMatch {
+ return i, true
+ }
+
+ j, nameValueMatch := e.dynTab.table.search(f)
+ if nameValueMatch || (i == 0 && j != 0) {
+ return j + uint64(staticTable.len()), nameValueMatch
+ }
+
+ return i, false
+}
+
+// SetMaxDynamicTableSize changes the dynamic header table size to v.
+// The actual size is bounded by the value passed to
+// SetMaxDynamicTableSizeLimit.
+func (e *Encoder) SetMaxDynamicTableSize(v uint32) {
+ if v > e.maxSizeLimit {
+ v = e.maxSizeLimit
+ }
+ if v < e.minSize {
+ e.minSize = v
+ }
+ e.tableSizeUpdate = true
+ e.dynTab.setMaxSize(v)
+}
+
+// SetMaxDynamicTableSizeLimit changes the maximum value that can be
+// specified in SetMaxDynamicTableSize to v. By default, it is set to
+// 4096, which is the same size of the default dynamic header table
+// size described in HPACK specification. If the current maximum
+// dynamic header table size is strictly greater than v, "Header Table
+// Size Update" will be done in the next WriteField call and the
+// maximum dynamic header table size is truncated to v.
+func (e *Encoder) SetMaxDynamicTableSizeLimit(v uint32) {
+ e.maxSizeLimit = v
+ if e.dynTab.maxSize > v {
+ e.tableSizeUpdate = true
+ e.dynTab.setMaxSize(v)
+ }
+}
+
+// shouldIndex reports whether f should be indexed.
+func (e *Encoder) shouldIndex(f HeaderField) bool {
+ return !f.Sensitive && f.Size() <= e.dynTab.maxSize
+}
+
+// appendIndexed appends index i, as encoded in "Indexed Header Field"
+// representation, to dst and returns the extended buffer.
+func appendIndexed(dst []byte, i uint64) []byte {
+ first := len(dst)
+ dst = appendVarInt(dst, 7, i)
+ dst[first] |= 0x80
+ return dst
+}
+
+// appendNewName appends f, as encoded in one of "Literal Header field
+// - New Name" representation variants, to dst and returns the
+// extended buffer.
+//
+// If f.Sensitive is true, "Never Indexed" representation is used. If
+// f.Sensitive is false and indexing is true, "Inremental Indexing"
+// representation is used.
+func appendNewName(dst []byte, f HeaderField, indexing bool) []byte {
+ dst = append(dst, encodeTypeByte(indexing, f.Sensitive))
+ dst = appendHpackString(dst, f.Name)
+ return appendHpackString(dst, f.Value)
+}
+
+// appendIndexedName appends f and index i referring indexed name
+// entry, as encoded in one of "Literal Header field - Indexed Name"
+// representation variants, to dst and returns the extended buffer.
+//
+// If f.Sensitive is true, "Never Indexed" representation is used. If
+// f.Sensitive is false and indexing is true, "Incremental Indexing"
+// representation is used.
+func appendIndexedName(dst []byte, f HeaderField, i uint64, indexing bool) []byte {
+ first := len(dst)
+ var n byte
+ if indexing {
+ n = 6
+ } else {
+ n = 4
+ }
+ dst = appendVarInt(dst, n, i)
+ dst[first] |= encodeTypeByte(indexing, f.Sensitive)
+ return appendHpackString(dst, f.Value)
+}
+
+// appendTableSize appends v, as encoded in "Header Table Size Update"
+// representation, to dst and returns the extended buffer.
+func appendTableSize(dst []byte, v uint32) []byte {
+ first := len(dst)
+ dst = appendVarInt(dst, 5, uint64(v))
+ dst[first] |= 0x20
+ return dst
+}
+
+// appendVarInt appends i, as encoded in variable integer form using n
+// bit prefix, to dst and returns the extended buffer.
+//
+// See
+// http://http2.github.io/http2-spec/compression.html#integer.representation
+func appendVarInt(dst []byte, n byte, i uint64) []byte {
+ k := uint64((1 << n) - 1)
+ if i < k {
+ return append(dst, byte(i))
+ }
+ dst = append(dst, byte(k))
+ i -= k
+ for ; i >= 128; i >>= 7 {
+ dst = append(dst, byte(0x80|(i&0x7f)))
+ }
+ return append(dst, byte(i))
+}
+
+// appendHpackString appends s, as encoded in "String Literal"
+// representation, to dst and returns the extended buffer.
+//
+// s will be encoded in Huffman codes only when it produces strictly
+// shorter byte string.
+func appendHpackString(dst []byte, s string) []byte {
+ huffmanLength := HuffmanEncodeLength(s)
+ if huffmanLength < uint64(len(s)) {
+ first := len(dst)
+ dst = appendVarInt(dst, 7, huffmanLength)
+ dst = AppendHuffmanString(dst, s)
+ dst[first] |= 0x80
+ } else {
+ dst = appendVarInt(dst, 7, uint64(len(s)))
+ dst = append(dst, s...)
+ }
+ return dst
+}
+
+// encodeTypeByte returns type byte. If sensitive is true, type byte
+// for "Never Indexed" representation is returned. If sensitive is
+// false and indexing is true, type byte for "Incremental Indexing"
+// representation is returned. Otherwise, type byte for "Without
+// Indexing" is returned.
+func encodeTypeByte(indexing, sensitive bool) byte {
+ if sensitive {
+ return 0x10
+ }
+ if indexing {
+ return 0x40
+ }
+ return 0
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/hpack.go b/vendor/golang.org/x/net/http2/hpack/hpack.go
new file mode 100644
index 0000000..85f18a2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/hpack.go
@@ -0,0 +1,504 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package hpack implements HPACK, a compression format for
+// efficiently representing HTTP header fields in the context of HTTP/2.
+//
+// See http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-09
+package hpack
+
+import (
+ "bytes"
+ "errors"
+ "fmt"
+)
+
+// A DecodingError is something the spec defines as a decoding error.
+type DecodingError struct {
+ Err error
+}
+
+func (de DecodingError) Error() string {
+ return fmt.Sprintf("decoding error: %v", de.Err)
+}
+
+// An InvalidIndexError is returned when an encoder references a table
+// entry before the static table or after the end of the dynamic table.
+type InvalidIndexError int
+
+func (e InvalidIndexError) Error() string {
+ return fmt.Sprintf("invalid indexed representation index %d", int(e))
+}
+
+// A HeaderField is a name-value pair. Both the name and value are
+// treated as opaque sequences of octets.
+type HeaderField struct {
+ Name, Value string
+
+ // Sensitive means that this header field should never be
+ // indexed.
+ Sensitive bool
+}
+
+// IsPseudo reports whether the header field is an http2 pseudo header.
+// That is, it reports whether it starts with a colon.
+// It is not otherwise guaranteed to be a valid pseudo header field,
+// though.
+func (hf HeaderField) IsPseudo() bool {
+ return len(hf.Name) != 0 && hf.Name[0] == ':'
+}
+
+func (hf HeaderField) String() string {
+ var suffix string
+ if hf.Sensitive {
+ suffix = " (sensitive)"
+ }
+ return fmt.Sprintf("header field %q = %q%s", hf.Name, hf.Value, suffix)
+}
+
+// Size returns the size of an entry per RFC 7541 section 4.1.
+func (hf HeaderField) Size() uint32 {
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.4.1
+ // "The size of the dynamic table is the sum of the size of
+ // its entries. The size of an entry is the sum of its name's
+ // length in octets (as defined in Section 5.2), its value's
+ // length in octets (see Section 5.2), plus 32. The size of
+ // an entry is calculated using the length of the name and
+ // value without any Huffman encoding applied."
+
+ // This can overflow if somebody makes a large HeaderField
+ // Name and/or Value by hand, but we don't care, because that
+ // won't happen on the wire because the encoding doesn't allow
+ // it.
+ return uint32(len(hf.Name) + len(hf.Value) + 32)
+}
+
+// A Decoder is the decoding context for incremental processing of
+// header blocks.
+type Decoder struct {
+ dynTab dynamicTable
+ emit func(f HeaderField)
+
+ emitEnabled bool // whether calls to emit are enabled
+ maxStrLen int // 0 means unlimited
+
+ // buf is the unparsed buffer. It's only written to
+ // saveBuf if it was truncated in the middle of a header
+ // block. Because it's usually not owned, we can only
+ // process it under Write.
+ buf []byte // not owned; only valid during Write
+
+ // saveBuf is previous data passed to Write which we weren't able
+ // to fully parse before. Unlike buf, we own this data.
+ saveBuf bytes.Buffer
+
+ firstField bool // processing the first field of the header block
+}
+
+// NewDecoder returns a new decoder with the provided maximum dynamic
+// table size. The emitFunc will be called for each valid field
+// parsed, in the same goroutine as calls to Write, before Write returns.
+func NewDecoder(maxDynamicTableSize uint32, emitFunc func(f HeaderField)) *Decoder {
+ d := &Decoder{
+ emit: emitFunc,
+ emitEnabled: true,
+ firstField: true,
+ }
+ d.dynTab.table.init()
+ d.dynTab.allowedMaxSize = maxDynamicTableSize
+ d.dynTab.setMaxSize(maxDynamicTableSize)
+ return d
+}
+
+// ErrStringLength is returned by Decoder.Write when the max string length
+// (as configured by Decoder.SetMaxStringLength) would be violated.
+var ErrStringLength = errors.New("hpack: string too long")
+
+// SetMaxStringLength sets the maximum size of a HeaderField name or
+// value string. If a string exceeds this length (even after any
+// decompression), Write will return ErrStringLength.
+// A value of 0 means unlimited and is the default from NewDecoder.
+func (d *Decoder) SetMaxStringLength(n int) {
+ d.maxStrLen = n
+}
+
+// SetEmitFunc changes the callback used when new header fields
+// are decoded.
+// It must be non-nil. It does not affect EmitEnabled.
+func (d *Decoder) SetEmitFunc(emitFunc func(f HeaderField)) {
+ d.emit = emitFunc
+}
+
+// SetEmitEnabled controls whether the emitFunc provided to NewDecoder
+// should be called. The default is true.
+//
+// This facility exists to let servers enforce MAX_HEADER_LIST_SIZE
+// while still decoding and keeping in-sync with decoder state, but
+// without doing unnecessary decompression or generating unnecessary
+// garbage for header fields past the limit.
+func (d *Decoder) SetEmitEnabled(v bool) { d.emitEnabled = v }
+
+// EmitEnabled reports whether calls to the emitFunc provided to NewDecoder
+// are currently enabled. The default is true.
+func (d *Decoder) EmitEnabled() bool { return d.emitEnabled }
+
+// TODO: add method *Decoder.Reset(maxSize, emitFunc) to let callers re-use Decoders and their
+// underlying buffers for garbage reasons.
+
+func (d *Decoder) SetMaxDynamicTableSize(v uint32) {
+ d.dynTab.setMaxSize(v)
+}
+
+// SetAllowedMaxDynamicTableSize sets the upper bound that the encoded
+// stream (via dynamic table size updates) may set the maximum size
+// to.
+func (d *Decoder) SetAllowedMaxDynamicTableSize(v uint32) {
+ d.dynTab.allowedMaxSize = v
+}
+
+type dynamicTable struct {
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.2.3.2
+ table headerFieldTable
+ size uint32 // in bytes
+ maxSize uint32 // current maxSize
+ allowedMaxSize uint32 // maxSize may go up to this, inclusive
+}
+
+func (dt *dynamicTable) setMaxSize(v uint32) {
+ dt.maxSize = v
+ dt.evict()
+}
+
+func (dt *dynamicTable) add(f HeaderField) {
+ dt.table.addEntry(f)
+ dt.size += f.Size()
+ dt.evict()
+}
+
+// If we're too big, evict old stuff.
+func (dt *dynamicTable) evict() {
+ var n int
+ for dt.size > dt.maxSize && n < dt.table.len() {
+ dt.size -= dt.table.ents[n].Size()
+ n++
+ }
+ dt.table.evictOldest(n)
+}
+
+func (d *Decoder) maxTableIndex() int {
+ // This should never overflow. RFC 7540 Section 6.5.2 limits the size of
+ // the dynamic table to 2^32 bytes, where each entry will occupy more than
+ // one byte. Further, the staticTable has a fixed, small length.
+ return d.dynTab.table.len() + staticTable.len()
+}
+
+func (d *Decoder) at(i uint64) (hf HeaderField, ok bool) {
+ // See Section 2.3.3.
+ if i == 0 {
+ return
+ }
+ if i <= uint64(staticTable.len()) {
+ return staticTable.ents[i-1], true
+ }
+ if i > uint64(d.maxTableIndex()) {
+ return
+ }
+ // In the dynamic table, newer entries have lower indices.
+ // However, dt.ents[0] is the oldest entry. Hence, dt.ents is
+ // the reversed dynamic table.
+ dt := d.dynTab.table
+ return dt.ents[dt.len()-(int(i)-staticTable.len())], true
+}
+
+// Decode decodes an entire block.
+//
+// TODO: remove this method and make it incremental later? This is
+// easier for debugging now.
+func (d *Decoder) DecodeFull(p []byte) ([]HeaderField, error) {
+ var hf []HeaderField
+ saveFunc := d.emit
+ defer func() { d.emit = saveFunc }()
+ d.emit = func(f HeaderField) { hf = append(hf, f) }
+ if _, err := d.Write(p); err != nil {
+ return nil, err
+ }
+ if err := d.Close(); err != nil {
+ return nil, err
+ }
+ return hf, nil
+}
+
+// Close declares that the decoding is complete and resets the Decoder
+// to be reused again for a new header block. If there is any remaining
+// data in the decoder's buffer, Close returns an error.
+func (d *Decoder) Close() error {
+ if d.saveBuf.Len() > 0 {
+ d.saveBuf.Reset()
+ return DecodingError{errors.New("truncated headers")}
+ }
+ d.firstField = true
+ return nil
+}
+
+func (d *Decoder) Write(p []byte) (n int, err error) {
+ if len(p) == 0 {
+ // Prevent state machine CPU attacks (making us redo
+ // work up to the point of finding out we don't have
+ // enough data)
+ return
+ }
+ // Only copy the data if we have to. Optimistically assume
+ // that p will contain a complete header block.
+ if d.saveBuf.Len() == 0 {
+ d.buf = p
+ } else {
+ d.saveBuf.Write(p)
+ d.buf = d.saveBuf.Bytes()
+ d.saveBuf.Reset()
+ }
+
+ for len(d.buf) > 0 {
+ err = d.parseHeaderFieldRepr()
+ if err == errNeedMore {
+ // Extra paranoia, making sure saveBuf won't
+ // get too large. All the varint and string
+ // reading code earlier should already catch
+ // overlong things and return ErrStringLength,
+ // but keep this as a last resort.
+ const varIntOverhead = 8 // conservative
+ if d.maxStrLen != 0 && int64(len(d.buf)) > 2*(int64(d.maxStrLen)+varIntOverhead) {
+ return 0, ErrStringLength
+ }
+ d.saveBuf.Write(d.buf)
+ return len(p), nil
+ }
+ d.firstField = false
+ if err != nil {
+ break
+ }
+ }
+ return len(p), err
+}
+
+// errNeedMore is an internal sentinel error value that means the
+// buffer is truncated and we need to read more data before we can
+// continue parsing.
+var errNeedMore = errors.New("need more data")
+
+type indexType int
+
+const (
+ indexedTrue indexType = iota
+ indexedFalse
+ indexedNever
+)
+
+func (v indexType) indexed() bool { return v == indexedTrue }
+func (v indexType) sensitive() bool { return v == indexedNever }
+
+// returns errNeedMore if there isn't enough data available.
+// any other error is fatal.
+// consumes d.buf iff it returns nil.
+// precondition: must be called with len(d.buf) > 0
+func (d *Decoder) parseHeaderFieldRepr() error {
+ b := d.buf[0]
+ switch {
+ case b&128 != 0:
+ // Indexed representation.
+ // High bit set?
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.6.1
+ return d.parseFieldIndexed()
+ case b&192 == 64:
+ // 6.2.1 Literal Header Field with Incremental Indexing
+ // 0b10xxxxxx: top two bits are 10
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.6.2.1
+ return d.parseFieldLiteral(6, indexedTrue)
+ case b&240 == 0:
+ // 6.2.2 Literal Header Field without Indexing
+ // 0b0000xxxx: top four bits are 0000
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.6.2.2
+ return d.parseFieldLiteral(4, indexedFalse)
+ case b&240 == 16:
+ // 6.2.3 Literal Header Field never Indexed
+ // 0b0001xxxx: top four bits are 0001
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.6.2.3
+ return d.parseFieldLiteral(4, indexedNever)
+ case b&224 == 32:
+ // 6.3 Dynamic Table Size Update
+ // Top three bits are '001'.
+ // http://http2.github.io/http2-spec/compression.html#rfc.section.6.3
+ return d.parseDynamicTableSizeUpdate()
+ }
+
+ return DecodingError{errors.New("invalid encoding")}
+}
+
+// (same invariants and behavior as parseHeaderFieldRepr)
+func (d *Decoder) parseFieldIndexed() error {
+ buf := d.buf
+ idx, buf, err := readVarInt(7, buf)
+ if err != nil {
+ return err
+ }
+ hf, ok := d.at(idx)
+ if !ok {
+ return DecodingError{InvalidIndexError(idx)}
+ }
+ d.buf = buf
+ return d.callEmit(HeaderField{Name: hf.Name, Value: hf.Value})
+}
+
+// (same invariants and behavior as parseHeaderFieldRepr)
+func (d *Decoder) parseFieldLiteral(n uint8, it indexType) error {
+ buf := d.buf
+ nameIdx, buf, err := readVarInt(n, buf)
+ if err != nil {
+ return err
+ }
+
+ var hf HeaderField
+ wantStr := d.emitEnabled || it.indexed()
+ if nameIdx > 0 {
+ ihf, ok := d.at(nameIdx)
+ if !ok {
+ return DecodingError{InvalidIndexError(nameIdx)}
+ }
+ hf.Name = ihf.Name
+ } else {
+ hf.Name, buf, err = d.readString(buf, wantStr)
+ if err != nil {
+ return err
+ }
+ }
+ hf.Value, buf, err = d.readString(buf, wantStr)
+ if err != nil {
+ return err
+ }
+ d.buf = buf
+ if it.indexed() {
+ d.dynTab.add(hf)
+ }
+ hf.Sensitive = it.sensitive()
+ return d.callEmit(hf)
+}
+
+func (d *Decoder) callEmit(hf HeaderField) error {
+ if d.maxStrLen != 0 {
+ if len(hf.Name) > d.maxStrLen || len(hf.Value) > d.maxStrLen {
+ return ErrStringLength
+ }
+ }
+ if d.emitEnabled {
+ d.emit(hf)
+ }
+ return nil
+}
+
+// (same invariants and behavior as parseHeaderFieldRepr)
+func (d *Decoder) parseDynamicTableSizeUpdate() error {
+ // RFC 7541, sec 4.2: This dynamic table size update MUST occur at the
+ // beginning of the first header block following the change to the dynamic table size.
+ if !d.firstField && d.dynTab.size > 0 {
+ return DecodingError{errors.New("dynamic table size update MUST occur at the beginning of a header block")}
+ }
+
+ buf := d.buf
+ size, buf, err := readVarInt(5, buf)
+ if err != nil {
+ return err
+ }
+ if size > uint64(d.dynTab.allowedMaxSize) {
+ return DecodingError{errors.New("dynamic table size update too large")}
+ }
+ d.dynTab.setMaxSize(uint32(size))
+ d.buf = buf
+ return nil
+}
+
+var errVarintOverflow = DecodingError{errors.New("varint integer overflow")}
+
+// readVarInt reads an unsigned variable length integer off the
+// beginning of p. n is the parameter as described in
+// http://http2.github.io/http2-spec/compression.html#rfc.section.5.1.
+//
+// n must always be between 1 and 8.
+//
+// The returned remain buffer is either a smaller suffix of p, or err != nil.
+// The error is errNeedMore if p doesn't contain a complete integer.
+func readVarInt(n byte, p []byte) (i uint64, remain []byte, err error) {
+ if n < 1 || n > 8 {
+ panic("bad n")
+ }
+ if len(p) == 0 {
+ return 0, p, errNeedMore
+ }
+ i = uint64(p[0])
+ if n < 8 {
+ i &= (1 << uint64(n)) - 1
+ }
+ if i < (1<<uint64(n))-1 {
+ return i, p[1:], nil
+ }
+
+ origP := p
+ p = p[1:]
+ var m uint64
+ for len(p) > 0 {
+ b := p[0]
+ p = p[1:]
+ i += uint64(b&127) << m
+ if b&128 == 0 {
+ return i, p, nil
+ }
+ m += 7
+ if m >= 63 { // TODO: proper overflow check. making this up.
+ return 0, origP, errVarintOverflow
+ }
+ }
+ return 0, origP, errNeedMore
+}
+
+// readString decodes an hpack string from p.
+//
+// wantStr is whether s will be used. If false, decompression and
+// []byte->string garbage are skipped if s will be ignored
+// anyway. This does mean that huffman decoding errors for non-indexed
+// strings past the MAX_HEADER_LIST_SIZE are ignored, but the server
+// is returning an error anyway, and because they're not indexed, the error
+// won't affect the decoding state.
+func (d *Decoder) readString(p []byte, wantStr bool) (s string, remain []byte, err error) {
+ if len(p) == 0 {
+ return "", p, errNeedMore
+ }
+ isHuff := p[0]&128 != 0
+ strLen, p, err := readVarInt(7, p)
+ if err != nil {
+ return "", p, err
+ }
+ if d.maxStrLen != 0 && strLen > uint64(d.maxStrLen) {
+ return "", nil, ErrStringLength
+ }
+ if uint64(len(p)) < strLen {
+ return "", p, errNeedMore
+ }
+ if !isHuff {
+ if wantStr {
+ s = string(p[:strLen])
+ }
+ return s, p[strLen:], nil
+ }
+
+ if wantStr {
+ buf := bufPool.Get().(*bytes.Buffer)
+ buf.Reset() // don't trust others
+ defer bufPool.Put(buf)
+ if err := huffmanDecode(buf, d.maxStrLen, p[:strLen]); err != nil {
+ buf.Reset()
+ return "", nil, err
+ }
+ s = buf.String()
+ buf.Reset() // be nice to GC
+ }
+ return s, p[strLen:], nil
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/huffman.go b/vendor/golang.org/x/net/http2/hpack/huffman.go
new file mode 100644
index 0000000..b412a96
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/huffman.go
@@ -0,0 +1,222 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+ "bytes"
+ "errors"
+ "io"
+ "sync"
+)
+
+var bufPool = sync.Pool{
+ New: func() interface{} { return new(bytes.Buffer) },
+}
+
+// HuffmanDecode decodes the string in v and writes the expanded
+// result to w, returning the number of bytes written to w and the
+// Write call's return value. At most one Write call is made.
+func HuffmanDecode(w io.Writer, v []byte) (int, error) {
+ buf := bufPool.Get().(*bytes.Buffer)
+ buf.Reset()
+ defer bufPool.Put(buf)
+ if err := huffmanDecode(buf, 0, v); err != nil {
+ return 0, err
+ }
+ return w.Write(buf.Bytes())
+}
+
+// HuffmanDecodeToString decodes the string in v.
+func HuffmanDecodeToString(v []byte) (string, error) {
+ buf := bufPool.Get().(*bytes.Buffer)
+ buf.Reset()
+ defer bufPool.Put(buf)
+ if err := huffmanDecode(buf, 0, v); err != nil {
+ return "", err
+ }
+ return buf.String(), nil
+}
+
+// ErrInvalidHuffman is returned for errors found decoding
+// Huffman-encoded strings.
+var ErrInvalidHuffman = errors.New("hpack: invalid Huffman-encoded data")
+
+// huffmanDecode decodes v to buf.
+// If maxLen is greater than 0, attempts to write more to buf than
+// maxLen bytes will return ErrStringLength.
+func huffmanDecode(buf *bytes.Buffer, maxLen int, v []byte) error {
+ rootHuffmanNode := getRootHuffmanNode()
+ n := rootHuffmanNode
+ // cur is the bit buffer that has not been fed into n.
+ // cbits is the number of low order bits in cur that are valid.
+ // sbits is the number of bits of the symbol prefix being decoded.
+ cur, cbits, sbits := uint(0), uint8(0), uint8(0)
+ for _, b := range v {
+ cur = cur<<8 | uint(b)
+ cbits += 8
+ sbits += 8
+ for cbits >= 8 {
+ idx := byte(cur >> (cbits - 8))
+ n = n.children[idx]
+ if n == nil {
+ return ErrInvalidHuffman
+ }
+ if n.children == nil {
+ if maxLen != 0 && buf.Len() == maxLen {
+ return ErrStringLength
+ }
+ buf.WriteByte(n.sym)
+ cbits -= n.codeLen
+ n = rootHuffmanNode
+ sbits = cbits
+ } else {
+ cbits -= 8
+ }
+ }
+ }
+ for cbits > 0 {
+ n = n.children[byte(cur<<(8-cbits))]
+ if n == nil {
+ return ErrInvalidHuffman
+ }
+ if n.children != nil || n.codeLen > cbits {
+ break
+ }
+ if maxLen != 0 && buf.Len() == maxLen {
+ return ErrStringLength
+ }
+ buf.WriteByte(n.sym)
+ cbits -= n.codeLen
+ n = rootHuffmanNode
+ sbits = cbits
+ }
+ if sbits > 7 {
+ // Either there was an incomplete symbol, or overlong padding.
+ // Both are decoding errors per RFC 7541 section 5.2.
+ return ErrInvalidHuffman
+ }
+ if mask := uint(1<<cbits - 1); cur&mask != mask {
+ // Trailing bits must be a prefix of EOS per RFC 7541 section 5.2.
+ return ErrInvalidHuffman
+ }
+
+ return nil
+}
+
+type node struct {
+ // children is non-nil for internal nodes
+ children *[256]*node
+
+ // The following are only valid if children is nil:
+ codeLen uint8 // number of bits that led to the output of sym
+ sym byte // output symbol
+}
+
+func newInternalNode() *node {
+ return &node{children: new([256]*node)}
+}
+
+var (
+ buildRootOnce sync.Once
+ lazyRootHuffmanNode *node
+)
+
+func getRootHuffmanNode() *node {
+ buildRootOnce.Do(buildRootHuffmanNode)
+ return lazyRootHuffmanNode
+}
+
+func buildRootHuffmanNode() {
+ if len(huffmanCodes) != 256 {
+ panic("unexpected size")
+ }
+ lazyRootHuffmanNode = newInternalNode()
+ for i, code := range huffmanCodes {
+ addDecoderNode(byte(i), code, huffmanCodeLen[i])
+ }
+}
+
+func addDecoderNode(sym byte, code uint32, codeLen uint8) {
+ cur := lazyRootHuffmanNode
+ for codeLen > 8 {
+ codeLen -= 8
+ i := uint8(code >> codeLen)
+ if cur.children[i] == nil {
+ cur.children[i] = newInternalNode()
+ }
+ cur = cur.children[i]
+ }
+ shift := 8 - codeLen
+ start, end := int(uint8(code<<shift)), int(1<<shift)
+ for i := start; i < start+end; i++ {
+ cur.children[i] = &node{sym: sym, codeLen: codeLen}
+ }
+}
+
+// AppendHuffmanString appends s, as encoded in Huffman codes, to dst
+// and returns the extended buffer.
+func AppendHuffmanString(dst []byte, s string) []byte {
+ rembits := uint8(8)
+
+ for i := 0; i < len(s); i++ {
+ if rembits == 8 {
+ dst = append(dst, 0)
+ }
+ dst, rembits = appendByteToHuffmanCode(dst, rembits, s[i])
+ }
+
+ if rembits < 8 {
+ // special EOS symbol
+ code := uint32(0x3fffffff)
+ nbits := uint8(30)
+
+ t := uint8(code >> (nbits - rembits))
+ dst[len(dst)-1] |= t
+ }
+
+ return dst
+}
+
+// HuffmanEncodeLength returns the number of bytes required to encode
+// s in Huffman codes. The result is round up to byte boundary.
+func HuffmanEncodeLength(s string) uint64 {
+ n := uint64(0)
+ for i := 0; i < len(s); i++ {
+ n += uint64(huffmanCodeLen[s[i]])
+ }
+ return (n + 7) / 8
+}
+
+// appendByteToHuffmanCode appends Huffman code for c to dst and
+// returns the extended buffer and the remaining bits in the last
+// element. The appending is not byte aligned and the remaining bits
+// in the last element of dst is given in rembits.
+func appendByteToHuffmanCode(dst []byte, rembits uint8, c byte) ([]byte, uint8) {
+ code := huffmanCodes[c]
+ nbits := huffmanCodeLen[c]
+
+ for {
+ if rembits > nbits {
+ t := uint8(code << (rembits - nbits))
+ dst[len(dst)-1] |= t
+ rembits -= nbits
+ break
+ }
+
+ t := uint8(code >> (nbits - rembits))
+ dst[len(dst)-1] |= t
+
+ nbits -= rembits
+ rembits = 8
+
+ if nbits == 0 {
+ break
+ }
+
+ dst = append(dst, 0)
+ }
+
+ return dst, rembits
+}
diff --git a/vendor/golang.org/x/net/http2/hpack/tables.go b/vendor/golang.org/x/net/http2/hpack/tables.go
new file mode 100644
index 0000000..a66cfbe
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/hpack/tables.go
@@ -0,0 +1,479 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package hpack
+
+import (
+ "fmt"
+)
+
+// headerFieldTable implements a list of HeaderFields.
+// This is used to implement the static and dynamic tables.
+type headerFieldTable struct {
+ // For static tables, entries are never evicted.
+ //
+ // For dynamic tables, entries are evicted from ents[0] and added to the end.
+ // Each entry has a unique id that starts at one and increments for each
+ // entry that is added. This unique id is stable across evictions, meaning
+ // it can be used as a pointer to a specific entry. As in hpack, unique ids
+ // are 1-based. The unique id for ents[k] is k + evictCount + 1.
+ //
+ // Zero is not a valid unique id.
+ //
+ // evictCount should not overflow in any remotely practical situation. In
+ // practice, we will have one dynamic table per HTTP/2 connection. If we
+ // assume a very powerful server that handles 1M QPS per connection and each
+ // request adds (then evicts) 100 entries from the table, it would still take
+ // 2M years for evictCount to overflow.
+ ents []HeaderField
+ evictCount uint64
+
+ // byName maps a HeaderField name to the unique id of the newest entry with
+ // the same name. See above for a definition of "unique id".
+ byName map[string]uint64
+
+ // byNameValue maps a HeaderField name/value pair to the unique id of the newest
+ // entry with the same name and value. See above for a definition of "unique id".
+ byNameValue map[pairNameValue]uint64
+}
+
+type pairNameValue struct {
+ name, value string
+}
+
+func (t *headerFieldTable) init() {
+ t.byName = make(map[string]uint64)
+ t.byNameValue = make(map[pairNameValue]uint64)
+}
+
+// len reports the number of entries in the table.
+func (t *headerFieldTable) len() int {
+ return len(t.ents)
+}
+
+// addEntry adds a new entry.
+func (t *headerFieldTable) addEntry(f HeaderField) {
+ id := uint64(t.len()) + t.evictCount + 1
+ t.byName[f.Name] = id
+ t.byNameValue[pairNameValue{f.Name, f.Value}] = id
+ t.ents = append(t.ents, f)
+}
+
+// evictOldest evicts the n oldest entries in the table.
+func (t *headerFieldTable) evictOldest(n int) {
+ if n > t.len() {
+ panic(fmt.Sprintf("evictOldest(%v) on table with %v entries", n, t.len()))
+ }
+ for k := 0; k < n; k++ {
+ f := t.ents[k]
+ id := t.evictCount + uint64(k) + 1
+ if t.byName[f.Name] == id {
+ delete(t.byName, f.Name)
+ }
+ if p := (pairNameValue{f.Name, f.Value}); t.byNameValue[p] == id {
+ delete(t.byNameValue, p)
+ }
+ }
+ copy(t.ents, t.ents[n:])
+ for k := t.len() - n; k < t.len(); k++ {
+ t.ents[k] = HeaderField{} // so strings can be garbage collected
+ }
+ t.ents = t.ents[:t.len()-n]
+ if t.evictCount+uint64(n) < t.evictCount {
+ panic("evictCount overflow")
+ }
+ t.evictCount += uint64(n)
+}
+
+// search finds f in the table. If there is no match, i is 0.
+// If both name and value match, i is the matched index and nameValueMatch
+// becomes true. If only name matches, i points to that index and
+// nameValueMatch becomes false.
+//
+// The returned index is a 1-based HPACK index. For dynamic tables, HPACK says
+// that index 1 should be the newest entry, but t.ents[0] is the oldest entry,
+// meaning t.ents is reversed for dynamic tables. Hence, when t is a dynamic
+// table, the return value i actually refers to the entry t.ents[t.len()-i].
+//
+// All tables are assumed to be a dynamic tables except for the global
+// staticTable pointer.
+//
+// See Section 2.3.3.
+func (t *headerFieldTable) search(f HeaderField) (i uint64, nameValueMatch bool) {
+ if !f.Sensitive {
+ if id := t.byNameValue[pairNameValue{f.Name, f.Value}]; id != 0 {
+ return t.idToIndex(id), true
+ }
+ }
+ if id := t.byName[f.Name]; id != 0 {
+ return t.idToIndex(id), false
+ }
+ return 0, false
+}
+
+// idToIndex converts a unique id to an HPACK index.
+// See Section 2.3.3.
+func (t *headerFieldTable) idToIndex(id uint64) uint64 {
+ if id <= t.evictCount {
+ panic(fmt.Sprintf("id (%v) <= evictCount (%v)", id, t.evictCount))
+ }
+ k := id - t.evictCount - 1 // convert id to an index t.ents[k]
+ if t != staticTable {
+ return uint64(t.len()) - k // dynamic table
+ }
+ return k + 1
+}
+
+// http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-07#appendix-B
+var staticTable = newStaticTable()
+var staticTableEntries = [...]HeaderField{
+ {Name: ":authority"},
+ {Name: ":method", Value: "GET"},
+ {Name: ":method", Value: "POST"},
+ {Name: ":path", Value: "/"},
+ {Name: ":path", Value: "/index.html"},
+ {Name: ":scheme", Value: "http"},
+ {Name: ":scheme", Value: "https"},
+ {Name: ":status", Value: "200"},
+ {Name: ":status", Value: "204"},
+ {Name: ":status", Value: "206"},
+ {Name: ":status", Value: "304"},
+ {Name: ":status", Value: "400"},
+ {Name: ":status", Value: "404"},
+ {Name: ":status", Value: "500"},
+ {Name: "accept-charset"},
+ {Name: "accept-encoding", Value: "gzip, deflate"},
+ {Name: "accept-language"},
+ {Name: "accept-ranges"},
+ {Name: "accept"},
+ {Name: "access-control-allow-origin"},
+ {Name: "age"},
+ {Name: "allow"},
+ {Name: "authorization"},
+ {Name: "cache-control"},
+ {Name: "content-disposition"},
+ {Name: "content-encoding"},
+ {Name: "content-language"},
+ {Name: "content-length"},
+ {Name: "content-location"},
+ {Name: "content-range"},
+ {Name: "content-type"},
+ {Name: "cookie"},
+ {Name: "date"},
+ {Name: "etag"},
+ {Name: "expect"},
+ {Name: "expires"},
+ {Name: "from"},
+ {Name: "host"},
+ {Name: "if-match"},
+ {Name: "if-modified-since"},
+ {Name: "if-none-match"},
+ {Name: "if-range"},
+ {Name: "if-unmodified-since"},
+ {Name: "last-modified"},
+ {Name: "link"},
+ {Name: "location"},
+ {Name: "max-forwards"},
+ {Name: "proxy-authenticate"},
+ {Name: "proxy-authorization"},
+ {Name: "range"},
+ {Name: "referer"},
+ {Name: "refresh"},
+ {Name: "retry-after"},
+ {Name: "server"},
+ {Name: "set-cookie"},
+ {Name: "strict-transport-security"},
+ {Name: "transfer-encoding"},
+ {Name: "user-agent"},
+ {Name: "vary"},
+ {Name: "via"},
+ {Name: "www-authenticate"},
+}
+
+func newStaticTable() *headerFieldTable {
+ t := &headerFieldTable{}
+ t.init()
+ for _, e := range staticTableEntries[:] {
+ t.addEntry(e)
+ }
+ return t
+}
+
+var huffmanCodes = [256]uint32{
+ 0x1ff8,
+ 0x7fffd8,
+ 0xfffffe2,
+ 0xfffffe3,
+ 0xfffffe4,
+ 0xfffffe5,
+ 0xfffffe6,
+ 0xfffffe7,
+ 0xfffffe8,
+ 0xffffea,
+ 0x3ffffffc,
+ 0xfffffe9,
+ 0xfffffea,
+ 0x3ffffffd,
+ 0xfffffeb,
+ 0xfffffec,
+ 0xfffffed,
+ 0xfffffee,
+ 0xfffffef,
+ 0xffffff0,
+ 0xffffff1,
+ 0xffffff2,
+ 0x3ffffffe,
+ 0xffffff3,
+ 0xffffff4,
+ 0xffffff5,
+ 0xffffff6,
+ 0xffffff7,
+ 0xffffff8,
+ 0xffffff9,
+ 0xffffffa,
+ 0xffffffb,
+ 0x14,
+ 0x3f8,
+ 0x3f9,
+ 0xffa,
+ 0x1ff9,
+ 0x15,
+ 0xf8,
+ 0x7fa,
+ 0x3fa,
+ 0x3fb,
+ 0xf9,
+ 0x7fb,
+ 0xfa,
+ 0x16,
+ 0x17,
+ 0x18,
+ 0x0,
+ 0x1,
+ 0x2,
+ 0x19,
+ 0x1a,
+ 0x1b,
+ 0x1c,
+ 0x1d,
+ 0x1e,
+ 0x1f,
+ 0x5c,
+ 0xfb,
+ 0x7ffc,
+ 0x20,
+ 0xffb,
+ 0x3fc,
+ 0x1ffa,
+ 0x21,
+ 0x5d,
+ 0x5e,
+ 0x5f,
+ 0x60,
+ 0x61,
+ 0x62,
+ 0x63,
+ 0x64,
+ 0x65,
+ 0x66,
+ 0x67,
+ 0x68,
+ 0x69,
+ 0x6a,
+ 0x6b,
+ 0x6c,
+ 0x6d,
+ 0x6e,
+ 0x6f,
+ 0x70,
+ 0x71,
+ 0x72,
+ 0xfc,
+ 0x73,
+ 0xfd,
+ 0x1ffb,
+ 0x7fff0,
+ 0x1ffc,
+ 0x3ffc,
+ 0x22,
+ 0x7ffd,
+ 0x3,
+ 0x23,
+ 0x4,
+ 0x24,
+ 0x5,
+ 0x25,
+ 0x26,
+ 0x27,
+ 0x6,
+ 0x74,
+ 0x75,
+ 0x28,
+ 0x29,
+ 0x2a,
+ 0x7,
+ 0x2b,
+ 0x76,
+ 0x2c,
+ 0x8,
+ 0x9,
+ 0x2d,
+ 0x77,
+ 0x78,
+ 0x79,
+ 0x7a,
+ 0x7b,
+ 0x7ffe,
+ 0x7fc,
+ 0x3ffd,
+ 0x1ffd,
+ 0xffffffc,
+ 0xfffe6,
+ 0x3fffd2,
+ 0xfffe7,
+ 0xfffe8,
+ 0x3fffd3,
+ 0x3fffd4,
+ 0x3fffd5,
+ 0x7fffd9,
+ 0x3fffd6,
+ 0x7fffda,
+ 0x7fffdb,
+ 0x7fffdc,
+ 0x7fffdd,
+ 0x7fffde,
+ 0xffffeb,
+ 0x7fffdf,
+ 0xffffec,
+ 0xffffed,
+ 0x3fffd7,
+ 0x7fffe0,
+ 0xffffee,
+ 0x7fffe1,
+ 0x7fffe2,
+ 0x7fffe3,
+ 0x7fffe4,
+ 0x1fffdc,
+ 0x3fffd8,
+ 0x7fffe5,
+ 0x3fffd9,
+ 0x7fffe6,
+ 0x7fffe7,
+ 0xffffef,
+ 0x3fffda,
+ 0x1fffdd,
+ 0xfffe9,
+ 0x3fffdb,
+ 0x3fffdc,
+ 0x7fffe8,
+ 0x7fffe9,
+ 0x1fffde,
+ 0x7fffea,
+ 0x3fffdd,
+ 0x3fffde,
+ 0xfffff0,
+ 0x1fffdf,
+ 0x3fffdf,
+ 0x7fffeb,
+ 0x7fffec,
+ 0x1fffe0,
+ 0x1fffe1,
+ 0x3fffe0,
+ 0x1fffe2,
+ 0x7fffed,
+ 0x3fffe1,
+ 0x7fffee,
+ 0x7fffef,
+ 0xfffea,
+ 0x3fffe2,
+ 0x3fffe3,
+ 0x3fffe4,
+ 0x7ffff0,
+ 0x3fffe5,
+ 0x3fffe6,
+ 0x7ffff1,
+ 0x3ffffe0,
+ 0x3ffffe1,
+ 0xfffeb,
+ 0x7fff1,
+ 0x3fffe7,
+ 0x7ffff2,
+ 0x3fffe8,
+ 0x1ffffec,
+ 0x3ffffe2,
+ 0x3ffffe3,
+ 0x3ffffe4,
+ 0x7ffffde,
+ 0x7ffffdf,
+ 0x3ffffe5,
+ 0xfffff1,
+ 0x1ffffed,
+ 0x7fff2,
+ 0x1fffe3,
+ 0x3ffffe6,
+ 0x7ffffe0,
+ 0x7ffffe1,
+ 0x3ffffe7,
+ 0x7ffffe2,
+ 0xfffff2,
+ 0x1fffe4,
+ 0x1fffe5,
+ 0x3ffffe8,
+ 0x3ffffe9,
+ 0xffffffd,
+ 0x7ffffe3,
+ 0x7ffffe4,
+ 0x7ffffe5,
+ 0xfffec,
+ 0xfffff3,
+ 0xfffed,
+ 0x1fffe6,
+ 0x3fffe9,
+ 0x1fffe7,
+ 0x1fffe8,
+ 0x7ffff3,
+ 0x3fffea,
+ 0x3fffeb,
+ 0x1ffffee,
+ 0x1ffffef,
+ 0xfffff4,
+ 0xfffff5,
+ 0x3ffffea,
+ 0x7ffff4,
+ 0x3ffffeb,
+ 0x7ffffe6,
+ 0x3ffffec,
+ 0x3ffffed,
+ 0x7ffffe7,
+ 0x7ffffe8,
+ 0x7ffffe9,
+ 0x7ffffea,
+ 0x7ffffeb,
+ 0xffffffe,
+ 0x7ffffec,
+ 0x7ffffed,
+ 0x7ffffee,
+ 0x7ffffef,
+ 0x7fffff0,
+ 0x3ffffee,
+}
+
+var huffmanCodeLen = [256]uint8{
+ 13, 23, 28, 28, 28, 28, 28, 28, 28, 24, 30, 28, 28, 30, 28, 28,
+ 28, 28, 28, 28, 28, 28, 30, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+ 6, 10, 10, 12, 13, 6, 8, 11, 10, 10, 8, 11, 8, 6, 6, 6,
+ 5, 5, 5, 6, 6, 6, 6, 6, 6, 6, 7, 8, 15, 6, 12, 10,
+ 13, 6, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 8, 7, 8, 13, 19, 13, 14, 6,
+ 15, 5, 6, 5, 6, 5, 6, 6, 6, 5, 7, 7, 6, 6, 6, 5,
+ 6, 7, 6, 5, 5, 6, 7, 7, 7, 7, 7, 15, 11, 14, 13, 28,
+ 20, 22, 20, 20, 22, 22, 22, 23, 22, 23, 23, 23, 23, 23, 24, 23,
+ 24, 24, 22, 23, 24, 23, 23, 23, 23, 21, 22, 23, 22, 23, 23, 24,
+ 22, 21, 20, 22, 22, 23, 23, 21, 23, 22, 22, 24, 21, 22, 23, 23,
+ 21, 21, 22, 21, 23, 22, 23, 23, 20, 22, 22, 22, 23, 22, 22, 23,
+ 26, 26, 20, 19, 22, 23, 22, 25, 26, 26, 26, 27, 27, 26, 24, 25,
+ 19, 21, 26, 27, 27, 26, 27, 24, 21, 21, 26, 26, 28, 27, 27, 27,
+ 20, 24, 20, 21, 22, 21, 21, 23, 22, 22, 25, 25, 24, 24, 26, 23,
+ 26, 27, 26, 26, 27, 27, 27, 27, 27, 28, 27, 27, 27, 27, 27, 26,
+}
diff --git a/vendor/golang.org/x/net/http2/http2.go b/vendor/golang.org/x/net/http2/http2.go
new file mode 100644
index 0000000..bdaba1d
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/http2.go
@@ -0,0 +1,384 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package http2 implements the HTTP/2 protocol.
+//
+// This package is low-level and intended to be used directly by very
+// few people. Most users will use it indirectly through the automatic
+// use by the net/http package (from Go 1.6 and later).
+// For use in earlier Go versions see ConfigureServer. (Transport support
+// requires Go 1.6 or later)
+//
+// See https://http2.github.io/ for more information on HTTP/2.
+//
+// See https://http2.golang.org/ for a test server running this code.
+//
+package http2 // import "golang.org/x/net/http2"
+
+import (
+ "bufio"
+ "crypto/tls"
+ "errors"
+ "fmt"
+ "io"
+ "net/http"
+ "os"
+ "sort"
+ "strconv"
+ "strings"
+ "sync"
+
+ "golang.org/x/net/http/httpguts"
+)
+
+var (
+ VerboseLogs bool
+ logFrameWrites bool
+ logFrameReads bool
+ inTests bool
+)
+
+func init() {
+ e := os.Getenv("GODEBUG")
+ if strings.Contains(e, "http2debug=1") {
+ VerboseLogs = true
+ }
+ if strings.Contains(e, "http2debug=2") {
+ VerboseLogs = true
+ logFrameWrites = true
+ logFrameReads = true
+ }
+}
+
+const (
+ // ClientPreface is the string that must be sent by new
+ // connections from clients.
+ ClientPreface = "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n"
+
+ // SETTINGS_MAX_FRAME_SIZE default
+ // http://http2.github.io/http2-spec/#rfc.section.6.5.2
+ initialMaxFrameSize = 16384
+
+ // NextProtoTLS is the NPN/ALPN protocol negotiated during
+ // HTTP/2's TLS setup.
+ NextProtoTLS = "h2"
+
+ // http://http2.github.io/http2-spec/#SettingValues
+ initialHeaderTableSize = 4096
+
+ initialWindowSize = 65535 // 6.9.2 Initial Flow Control Window Size
+
+ defaultMaxReadFrameSize = 1 << 20
+)
+
+var (
+ clientPreface = []byte(ClientPreface)
+)
+
+type streamState int
+
+// HTTP/2 stream states.
+//
+// See http://tools.ietf.org/html/rfc7540#section-5.1.
+//
+// For simplicity, the server code merges "reserved (local)" into
+// "half-closed (remote)". This is one less state transition to track.
+// The only downside is that we send PUSH_PROMISEs slightly less
+// liberally than allowable. More discussion here:
+// https://lists.w3.org/Archives/Public/ietf-http-wg/2016JulSep/0599.html
+//
+// "reserved (remote)" is omitted since the client code does not
+// support server push.
+const (
+ stateIdle streamState = iota
+ stateOpen
+ stateHalfClosedLocal
+ stateHalfClosedRemote
+ stateClosed
+)
+
+var stateName = [...]string{
+ stateIdle: "Idle",
+ stateOpen: "Open",
+ stateHalfClosedLocal: "HalfClosedLocal",
+ stateHalfClosedRemote: "HalfClosedRemote",
+ stateClosed: "Closed",
+}
+
+func (st streamState) String() string {
+ return stateName[st]
+}
+
+// Setting is a setting parameter: which setting it is, and its value.
+type Setting struct {
+ // ID is which setting is being set.
+ // See http://http2.github.io/http2-spec/#SettingValues
+ ID SettingID
+
+ // Val is the value.
+ Val uint32
+}
+
+func (s Setting) String() string {
+ return fmt.Sprintf("[%v = %d]", s.ID, s.Val)
+}
+
+// Valid reports whether the setting is valid.
+func (s Setting) Valid() error {
+ // Limits and error codes from 6.5.2 Defined SETTINGS Parameters
+ switch s.ID {
+ case SettingEnablePush:
+ if s.Val != 1 && s.Val != 0 {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ case SettingInitialWindowSize:
+ if s.Val > 1<<31-1 {
+ return ConnectionError(ErrCodeFlowControl)
+ }
+ case SettingMaxFrameSize:
+ if s.Val < 16384 || s.Val > 1<<24-1 {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ }
+ return nil
+}
+
+// A SettingID is an HTTP/2 setting as defined in
+// http://http2.github.io/http2-spec/#iana-settings
+type SettingID uint16
+
+const (
+ SettingHeaderTableSize SettingID = 0x1
+ SettingEnablePush SettingID = 0x2
+ SettingMaxConcurrentStreams SettingID = 0x3
+ SettingInitialWindowSize SettingID = 0x4
+ SettingMaxFrameSize SettingID = 0x5
+ SettingMaxHeaderListSize SettingID = 0x6
+)
+
+var settingName = map[SettingID]string{
+ SettingHeaderTableSize: "HEADER_TABLE_SIZE",
+ SettingEnablePush: "ENABLE_PUSH",
+ SettingMaxConcurrentStreams: "MAX_CONCURRENT_STREAMS",
+ SettingInitialWindowSize: "INITIAL_WINDOW_SIZE",
+ SettingMaxFrameSize: "MAX_FRAME_SIZE",
+ SettingMaxHeaderListSize: "MAX_HEADER_LIST_SIZE",
+}
+
+func (s SettingID) String() string {
+ if v, ok := settingName[s]; ok {
+ return v
+ }
+ return fmt.Sprintf("UNKNOWN_SETTING_%d", uint16(s))
+}
+
+var (
+ errInvalidHeaderFieldName = errors.New("http2: invalid header field name")
+ errInvalidHeaderFieldValue = errors.New("http2: invalid header field value")
+)
+
+// validWireHeaderFieldName reports whether v is a valid header field
+// name (key). See httpguts.ValidHeaderName for the base rules.
+//
+// Further, http2 says:
+// "Just as in HTTP/1.x, header field names are strings of ASCII
+// characters that are compared in a case-insensitive
+// fashion. However, header field names MUST be converted to
+// lowercase prior to their encoding in HTTP/2. "
+func validWireHeaderFieldName(v string) bool {
+ if len(v) == 0 {
+ return false
+ }
+ for _, r := range v {
+ if !httpguts.IsTokenRune(r) {
+ return false
+ }
+ if 'A' <= r && r <= 'Z' {
+ return false
+ }
+ }
+ return true
+}
+
+func httpCodeString(code int) string {
+ switch code {
+ case 200:
+ return "200"
+ case 404:
+ return "404"
+ }
+ return strconv.Itoa(code)
+}
+
+// from pkg io
+type stringWriter interface {
+ WriteString(s string) (n int, err error)
+}
+
+// A gate lets two goroutines coordinate their activities.
+type gate chan struct{}
+
+func (g gate) Done() { g <- struct{}{} }
+func (g gate) Wait() { <-g }
+
+// A closeWaiter is like a sync.WaitGroup but only goes 1 to 0 (open to closed).
+type closeWaiter chan struct{}
+
+// Init makes a closeWaiter usable.
+// It exists because so a closeWaiter value can be placed inside a
+// larger struct and have the Mutex and Cond's memory in the same
+// allocation.
+func (cw *closeWaiter) Init() {
+ *cw = make(chan struct{})
+}
+
+// Close marks the closeWaiter as closed and unblocks any waiters.
+func (cw closeWaiter) Close() {
+ close(cw)
+}
+
+// Wait waits for the closeWaiter to become closed.
+func (cw closeWaiter) Wait() {
+ <-cw
+}
+
+// bufferedWriter is a buffered writer that writes to w.
+// Its buffered writer is lazily allocated as needed, to minimize
+// idle memory usage with many connections.
+type bufferedWriter struct {
+ w io.Writer // immutable
+ bw *bufio.Writer // non-nil when data is buffered
+}
+
+func newBufferedWriter(w io.Writer) *bufferedWriter {
+ return &bufferedWriter{w: w}
+}
+
+// bufWriterPoolBufferSize is the size of bufio.Writer's
+// buffers created using bufWriterPool.
+//
+// TODO: pick a less arbitrary value? this is a bit under
+// (3 x typical 1500 byte MTU) at least. Other than that,
+// not much thought went into it.
+const bufWriterPoolBufferSize = 4 << 10
+
+var bufWriterPool = sync.Pool{
+ New: func() interface{} {
+ return bufio.NewWriterSize(nil, bufWriterPoolBufferSize)
+ },
+}
+
+func (w *bufferedWriter) Available() int {
+ if w.bw == nil {
+ return bufWriterPoolBufferSize
+ }
+ return w.bw.Available()
+}
+
+func (w *bufferedWriter) Write(p []byte) (n int, err error) {
+ if w.bw == nil {
+ bw := bufWriterPool.Get().(*bufio.Writer)
+ bw.Reset(w.w)
+ w.bw = bw
+ }
+ return w.bw.Write(p)
+}
+
+func (w *bufferedWriter) Flush() error {
+ bw := w.bw
+ if bw == nil {
+ return nil
+ }
+ err := bw.Flush()
+ bw.Reset(nil)
+ bufWriterPool.Put(bw)
+ w.bw = nil
+ return err
+}
+
+func mustUint31(v int32) uint32 {
+ if v < 0 || v > 2147483647 {
+ panic("out of range")
+ }
+ return uint32(v)
+}
+
+// bodyAllowedForStatus reports whether a given response status code
+// permits a body. See RFC 7230, section 3.3.
+func bodyAllowedForStatus(status int) bool {
+ switch {
+ case status >= 100 && status <= 199:
+ return false
+ case status == 204:
+ return false
+ case status == 304:
+ return false
+ }
+ return true
+}
+
+type httpError struct {
+ msg string
+ timeout bool
+}
+
+func (e *httpError) Error() string { return e.msg }
+func (e *httpError) Timeout() bool { return e.timeout }
+func (e *httpError) Temporary() bool { return true }
+
+var errTimeout error = &httpError{msg: "http2: timeout awaiting response headers", timeout: true}
+
+type connectionStater interface {
+ ConnectionState() tls.ConnectionState
+}
+
+var sorterPool = sync.Pool{New: func() interface{} { return new(sorter) }}
+
+type sorter struct {
+ v []string // owned by sorter
+}
+
+func (s *sorter) Len() int { return len(s.v) }
+func (s *sorter) Swap(i, j int) { s.v[i], s.v[j] = s.v[j], s.v[i] }
+func (s *sorter) Less(i, j int) bool { return s.v[i] < s.v[j] }
+
+// Keys returns the sorted keys of h.
+//
+// The returned slice is only valid until s used again or returned to
+// its pool.
+func (s *sorter) Keys(h http.Header) []string {
+ keys := s.v[:0]
+ for k := range h {
+ keys = append(keys, k)
+ }
+ s.v = keys
+ sort.Sort(s)
+ return keys
+}
+
+func (s *sorter) SortStrings(ss []string) {
+ // Our sorter works on s.v, which sorter owns, so
+ // stash it away while we sort the user's buffer.
+ save := s.v
+ s.v = ss
+ sort.Sort(s)
+ s.v = save
+}
+
+// validPseudoPath reports whether v is a valid :path pseudo-header
+// value. It must be either:
+//
+// *) a non-empty string starting with '/'
+// *) the string '*', for OPTIONS requests.
+//
+// For now this is only used a quick check for deciding when to clean
+// up Opaque URLs before sending requests from the Transport.
+// See golang.org/issue/16847
+//
+// We used to enforce that the path also didn't start with "//", but
+// Google's GFE accepts such paths and Chrome sends them, so ignore
+// that part of the spec. See golang.org/issue/19103.
+func validPseudoPath(v string) bool {
+ return (len(v) > 0 && v[0] == '/') || v == "*"
+}
diff --git a/vendor/golang.org/x/net/http2/not_go111.go b/vendor/golang.org/x/net/http2/not_go111.go
new file mode 100644
index 0000000..161bca7
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/not_go111.go
@@ -0,0 +1,20 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !go1.11
+
+package http2
+
+import (
+ "net/http/httptrace"
+ "net/textproto"
+)
+
+func traceHasWroteHeaderField(trace *httptrace.ClientTrace) bool { return false }
+
+func traceWroteHeaderField(trace *httptrace.ClientTrace, k, v string) {}
+
+func traceGot1xxResponseFunc(trace *httptrace.ClientTrace) func(int, textproto.MIMEHeader) error {
+ return nil
+}
diff --git a/vendor/golang.org/x/net/http2/pipe.go b/vendor/golang.org/x/net/http2/pipe.go
new file mode 100644
index 0000000..a614009
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/pipe.go
@@ -0,0 +1,163 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "errors"
+ "io"
+ "sync"
+)
+
+// pipe is a goroutine-safe io.Reader/io.Writer pair. It's like
+// io.Pipe except there are no PipeReader/PipeWriter halves, and the
+// underlying buffer is an interface. (io.Pipe is always unbuffered)
+type pipe struct {
+ mu sync.Mutex
+ c sync.Cond // c.L lazily initialized to &p.mu
+ b pipeBuffer // nil when done reading
+ err error // read error once empty. non-nil means closed.
+ breakErr error // immediate read error (caller doesn't see rest of b)
+ donec chan struct{} // closed on error
+ readFn func() // optional code to run in Read before error
+}
+
+type pipeBuffer interface {
+ Len() int
+ io.Writer
+ io.Reader
+}
+
+func (p *pipe) Len() int {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ if p.b == nil {
+ return 0
+ }
+ return p.b.Len()
+}
+
+// Read waits until data is available and copies bytes
+// from the buffer into p.
+func (p *pipe) Read(d []byte) (n int, err error) {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ if p.c.L == nil {
+ p.c.L = &p.mu
+ }
+ for {
+ if p.breakErr != nil {
+ return 0, p.breakErr
+ }
+ if p.b != nil && p.b.Len() > 0 {
+ return p.b.Read(d)
+ }
+ if p.err != nil {
+ if p.readFn != nil {
+ p.readFn() // e.g. copy trailers
+ p.readFn = nil // not sticky like p.err
+ }
+ p.b = nil
+ return 0, p.err
+ }
+ p.c.Wait()
+ }
+}
+
+var errClosedPipeWrite = errors.New("write on closed buffer")
+
+// Write copies bytes from p into the buffer and wakes a reader.
+// It is an error to write more data than the buffer can hold.
+func (p *pipe) Write(d []byte) (n int, err error) {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ if p.c.L == nil {
+ p.c.L = &p.mu
+ }
+ defer p.c.Signal()
+ if p.err != nil {
+ return 0, errClosedPipeWrite
+ }
+ if p.breakErr != nil {
+ return len(d), nil // discard when there is no reader
+ }
+ return p.b.Write(d)
+}
+
+// CloseWithError causes the next Read (waking up a current blocked
+// Read if needed) to return the provided err after all data has been
+// read.
+//
+// The error must be non-nil.
+func (p *pipe) CloseWithError(err error) { p.closeWithError(&p.err, err, nil) }
+
+// BreakWithError causes the next Read (waking up a current blocked
+// Read if needed) to return the provided err immediately, without
+// waiting for unread data.
+func (p *pipe) BreakWithError(err error) { p.closeWithError(&p.breakErr, err, nil) }
+
+// closeWithErrorAndCode is like CloseWithError but also sets some code to run
+// in the caller's goroutine before returning the error.
+func (p *pipe) closeWithErrorAndCode(err error, fn func()) { p.closeWithError(&p.err, err, fn) }
+
+func (p *pipe) closeWithError(dst *error, err error, fn func()) {
+ if err == nil {
+ panic("err must be non-nil")
+ }
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ if p.c.L == nil {
+ p.c.L = &p.mu
+ }
+ defer p.c.Signal()
+ if *dst != nil {
+ // Already been done.
+ return
+ }
+ p.readFn = fn
+ if dst == &p.breakErr {
+ p.b = nil
+ }
+ *dst = err
+ p.closeDoneLocked()
+}
+
+// requires p.mu be held.
+func (p *pipe) closeDoneLocked() {
+ if p.donec == nil {
+ return
+ }
+ // Close if unclosed. This isn't racy since we always
+ // hold p.mu while closing.
+ select {
+ case <-p.donec:
+ default:
+ close(p.donec)
+ }
+}
+
+// Err returns the error (if any) first set by BreakWithError or CloseWithError.
+func (p *pipe) Err() error {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ if p.breakErr != nil {
+ return p.breakErr
+ }
+ return p.err
+}
+
+// Done returns a channel which is closed if and when this pipe is closed
+// with CloseWithError.
+func (p *pipe) Done() <-chan struct{} {
+ p.mu.Lock()
+ defer p.mu.Unlock()
+ if p.donec == nil {
+ p.donec = make(chan struct{})
+ if p.err != nil || p.breakErr != nil {
+ // Already hit an error.
+ p.closeDoneLocked()
+ }
+ }
+ return p.donec
+}
diff --git a/vendor/golang.org/x/net/http2/server.go b/vendor/golang.org/x/net/http2/server.go
new file mode 100644
index 0000000..b57b6e2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/server.go
@@ -0,0 +1,2901 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// TODO: turn off the serve goroutine when idle, so
+// an idle conn only has the readFrames goroutine active. (which could
+// also be optimized probably to pin less memory in crypto/tls). This
+// would involve tracking when the serve goroutine is active (atomic
+// int32 read/CAS probably?) and starting it up when frames arrive,
+// and shutting it down when all handlers exit. the occasional PING
+// packets could use time.AfterFunc to call sc.wakeStartServeLoop()
+// (which is a no-op if already running) and then queue the PING write
+// as normal. The serve loop would then exit in most cases (if no
+// Handlers running) and not be woken up again until the PING packet
+// returns.
+
+// TODO (maybe): add a mechanism for Handlers to going into
+// half-closed-local mode (rw.(io.Closer) test?) but not exit their
+// handler, and continue to be able to read from the
+// Request.Body. This would be a somewhat semantic change from HTTP/1
+// (or at least what we expose in net/http), so I'd probably want to
+// add it there too. For now, this package says that returning from
+// the Handler ServeHTTP function means you're both done reading and
+// done writing, without a way to stop just one or the other.
+
+package http2
+
+import (
+ "bufio"
+ "bytes"
+ "context"
+ "crypto/tls"
+ "errors"
+ "fmt"
+ "io"
+ "log"
+ "math"
+ "net"
+ "net/http"
+ "net/textproto"
+ "net/url"
+ "os"
+ "reflect"
+ "runtime"
+ "strconv"
+ "strings"
+ "sync"
+ "time"
+
+ "golang.org/x/net/http/httpguts"
+ "golang.org/x/net/http2/hpack"
+)
+
+const (
+ prefaceTimeout = 10 * time.Second
+ firstSettingsTimeout = 2 * time.Second // should be in-flight with preface anyway
+ handlerChunkWriteSize = 4 << 10
+ defaultMaxStreams = 250 // TODO: make this 100 as the GFE seems to?
+)
+
+var (
+ errClientDisconnected = errors.New("client disconnected")
+ errClosedBody = errors.New("body closed by handler")
+ errHandlerComplete = errors.New("http2: request body closed due to handler exiting")
+ errStreamClosed = errors.New("http2: stream closed")
+)
+
+var responseWriterStatePool = sync.Pool{
+ New: func() interface{} {
+ rws := &responseWriterState{}
+ rws.bw = bufio.NewWriterSize(chunkWriter{rws}, handlerChunkWriteSize)
+ return rws
+ },
+}
+
+// Test hooks.
+var (
+ testHookOnConn func()
+ testHookGetServerConn func(*serverConn)
+ testHookOnPanicMu *sync.Mutex // nil except in tests
+ testHookOnPanic func(sc *serverConn, panicVal interface{}) (rePanic bool)
+)
+
+// Server is an HTTP/2 server.
+type Server struct {
+ // MaxHandlers limits the number of http.Handler ServeHTTP goroutines
+ // which may run at a time over all connections.
+ // Negative or zero no limit.
+ // TODO: implement
+ MaxHandlers int
+
+ // MaxConcurrentStreams optionally specifies the number of
+ // concurrent streams that each client may have open at a
+ // time. This is unrelated to the number of http.Handler goroutines
+ // which may be active globally, which is MaxHandlers.
+ // If zero, MaxConcurrentStreams defaults to at least 100, per
+ // the HTTP/2 spec's recommendations.
+ MaxConcurrentStreams uint32
+
+ // MaxReadFrameSize optionally specifies the largest frame
+ // this server is willing to read. A valid value is between
+ // 16k and 16M, inclusive. If zero or otherwise invalid, a
+ // default value is used.
+ MaxReadFrameSize uint32
+
+ // PermitProhibitedCipherSuites, if true, permits the use of
+ // cipher suites prohibited by the HTTP/2 spec.
+ PermitProhibitedCipherSuites bool
+
+ // IdleTimeout specifies how long until idle clients should be
+ // closed with a GOAWAY frame. PING frames are not considered
+ // activity for the purposes of IdleTimeout.
+ IdleTimeout time.Duration
+
+ // MaxUploadBufferPerConnection is the size of the initial flow
+ // control window for each connections. The HTTP/2 spec does not
+ // allow this to be smaller than 65535 or larger than 2^32-1.
+ // If the value is outside this range, a default value will be
+ // used instead.
+ MaxUploadBufferPerConnection int32
+
+ // MaxUploadBufferPerStream is the size of the initial flow control
+ // window for each stream. The HTTP/2 spec does not allow this to
+ // be larger than 2^32-1. If the value is zero or larger than the
+ // maximum, a default value will be used instead.
+ MaxUploadBufferPerStream int32
+
+ // NewWriteScheduler constructs a write scheduler for a connection.
+ // If nil, a default scheduler is chosen.
+ NewWriteScheduler func() WriteScheduler
+
+ // Internal state. This is a pointer (rather than embedded directly)
+ // so that we don't embed a Mutex in this struct, which will make the
+ // struct non-copyable, which might break some callers.
+ state *serverInternalState
+}
+
+func (s *Server) initialConnRecvWindowSize() int32 {
+ if s.MaxUploadBufferPerConnection > initialWindowSize {
+ return s.MaxUploadBufferPerConnection
+ }
+ return 1 << 20
+}
+
+func (s *Server) initialStreamRecvWindowSize() int32 {
+ if s.MaxUploadBufferPerStream > 0 {
+ return s.MaxUploadBufferPerStream
+ }
+ return 1 << 20
+}
+
+func (s *Server) maxReadFrameSize() uint32 {
+ if v := s.MaxReadFrameSize; v >= minMaxFrameSize && v <= maxFrameSize {
+ return v
+ }
+ return defaultMaxReadFrameSize
+}
+
+func (s *Server) maxConcurrentStreams() uint32 {
+ if v := s.MaxConcurrentStreams; v > 0 {
+ return v
+ }
+ return defaultMaxStreams
+}
+
+type serverInternalState struct {
+ mu sync.Mutex
+ activeConns map[*serverConn]struct{}
+}
+
+func (s *serverInternalState) registerConn(sc *serverConn) {
+ if s == nil {
+ return // if the Server was used without calling ConfigureServer
+ }
+ s.mu.Lock()
+ s.activeConns[sc] = struct{}{}
+ s.mu.Unlock()
+}
+
+func (s *serverInternalState) unregisterConn(sc *serverConn) {
+ if s == nil {
+ return // if the Server was used without calling ConfigureServer
+ }
+ s.mu.Lock()
+ delete(s.activeConns, sc)
+ s.mu.Unlock()
+}
+
+func (s *serverInternalState) startGracefulShutdown() {
+ if s == nil {
+ return // if the Server was used without calling ConfigureServer
+ }
+ s.mu.Lock()
+ for sc := range s.activeConns {
+ sc.startGracefulShutdown()
+ }
+ s.mu.Unlock()
+}
+
+// ConfigureServer adds HTTP/2 support to a net/http Server.
+//
+// The configuration conf may be nil.
+//
+// ConfigureServer must be called before s begins serving.
+func ConfigureServer(s *http.Server, conf *Server) error {
+ if s == nil {
+ panic("nil *http.Server")
+ }
+ if conf == nil {
+ conf = new(Server)
+ }
+ conf.state = &serverInternalState{activeConns: make(map[*serverConn]struct{})}
+ if h1, h2 := s, conf; h2.IdleTimeout == 0 {
+ if h1.IdleTimeout != 0 {
+ h2.IdleTimeout = h1.IdleTimeout
+ } else {
+ h2.IdleTimeout = h1.ReadTimeout
+ }
+ }
+ s.RegisterOnShutdown(conf.state.startGracefulShutdown)
+
+ if s.TLSConfig == nil {
+ s.TLSConfig = new(tls.Config)
+ } else if s.TLSConfig.CipherSuites != nil {
+ // If they already provided a CipherSuite list, return
+ // an error if it has a bad order or is missing
+ // ECDHE_RSA_WITH_AES_128_GCM_SHA256 or ECDHE_ECDSA_WITH_AES_128_GCM_SHA256.
+ haveRequired := false
+ sawBad := false
+ for i, cs := range s.TLSConfig.CipherSuites {
+ switch cs {
+ case tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
+ // Alternative MTI cipher to not discourage ECDSA-only servers.
+ // See http://golang.org/cl/30721 for further information.
+ tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256:
+ haveRequired = true
+ }
+ if isBadCipher(cs) {
+ sawBad = true
+ } else if sawBad {
+ return fmt.Errorf("http2: TLSConfig.CipherSuites index %d contains an HTTP/2-approved cipher suite (%#04x), but it comes after unapproved cipher suites. With this configuration, clients that don't support previous, approved cipher suites may be given an unapproved one and reject the connection.", i, cs)
+ }
+ }
+ if !haveRequired {
+ return fmt.Errorf("http2: TLSConfig.CipherSuites is missing an HTTP/2-required AES_128_GCM_SHA256 cipher.")
+ }
+ }
+
+ // Note: not setting MinVersion to tls.VersionTLS12,
+ // as we don't want to interfere with HTTP/1.1 traffic
+ // on the user's server. We enforce TLS 1.2 later once
+ // we accept a connection. Ideally this should be done
+ // during next-proto selection, but using TLS <1.2 with
+ // HTTP/2 is still the client's bug.
+
+ s.TLSConfig.PreferServerCipherSuites = true
+
+ haveNPN := false
+ for _, p := range s.TLSConfig.NextProtos {
+ if p == NextProtoTLS {
+ haveNPN = true
+ break
+ }
+ }
+ if !haveNPN {
+ s.TLSConfig.NextProtos = append(s.TLSConfig.NextProtos, NextProtoTLS)
+ }
+
+ if s.TLSNextProto == nil {
+ s.TLSNextProto = map[string]func(*http.Server, *tls.Conn, http.Handler){}
+ }
+ protoHandler := func(hs *http.Server, c *tls.Conn, h http.Handler) {
+ if testHookOnConn != nil {
+ testHookOnConn()
+ }
+ conf.ServeConn(c, &ServeConnOpts{
+ Handler: h,
+ BaseConfig: hs,
+ })
+ }
+ s.TLSNextProto[NextProtoTLS] = protoHandler
+ return nil
+}
+
+// ServeConnOpts are options for the Server.ServeConn method.
+type ServeConnOpts struct {
+ // BaseConfig optionally sets the base configuration
+ // for values. If nil, defaults are used.
+ BaseConfig *http.Server
+
+ // Handler specifies which handler to use for processing
+ // requests. If nil, BaseConfig.Handler is used. If BaseConfig
+ // or BaseConfig.Handler is nil, http.DefaultServeMux is used.
+ Handler http.Handler
+}
+
+func (o *ServeConnOpts) baseConfig() *http.Server {
+ if o != nil && o.BaseConfig != nil {
+ return o.BaseConfig
+ }
+ return new(http.Server)
+}
+
+func (o *ServeConnOpts) handler() http.Handler {
+ if o != nil {
+ if o.Handler != nil {
+ return o.Handler
+ }
+ if o.BaseConfig != nil && o.BaseConfig.Handler != nil {
+ return o.BaseConfig.Handler
+ }
+ }
+ return http.DefaultServeMux
+}
+
+// ServeConn serves HTTP/2 requests on the provided connection and
+// blocks until the connection is no longer readable.
+//
+// ServeConn starts speaking HTTP/2 assuming that c has not had any
+// reads or writes. It writes its initial settings frame and expects
+// to be able to read the preface and settings frame from the
+// client. If c has a ConnectionState method like a *tls.Conn, the
+// ConnectionState is used to verify the TLS ciphersuite and to set
+// the Request.TLS field in Handlers.
+//
+// ServeConn does not support h2c by itself. Any h2c support must be
+// implemented in terms of providing a suitably-behaving net.Conn.
+//
+// The opts parameter is optional. If nil, default values are used.
+func (s *Server) ServeConn(c net.Conn, opts *ServeConnOpts) {
+ baseCtx, cancel := serverConnBaseContext(c, opts)
+ defer cancel()
+
+ sc := &serverConn{
+ srv: s,
+ hs: opts.baseConfig(),
+ conn: c,
+ baseCtx: baseCtx,
+ remoteAddrStr: c.RemoteAddr().String(),
+ bw: newBufferedWriter(c),
+ handler: opts.handler(),
+ streams: make(map[uint32]*stream),
+ readFrameCh: make(chan readFrameResult),
+ wantWriteFrameCh: make(chan FrameWriteRequest, 8),
+ serveMsgCh: make(chan interface{}, 8),
+ wroteFrameCh: make(chan frameWriteResult, 1), // buffered; one send in writeFrameAsync
+ bodyReadCh: make(chan bodyReadMsg), // buffering doesn't matter either way
+ doneServing: make(chan struct{}),
+ clientMaxStreams: math.MaxUint32, // Section 6.5.2: "Initially, there is no limit to this value"
+ advMaxStreams: s.maxConcurrentStreams(),
+ initialStreamSendWindowSize: initialWindowSize,
+ maxFrameSize: initialMaxFrameSize,
+ headerTableSize: initialHeaderTableSize,
+ serveG: newGoroutineLock(),
+ pushEnabled: true,
+ }
+
+ s.state.registerConn(sc)
+ defer s.state.unregisterConn(sc)
+
+ // The net/http package sets the write deadline from the
+ // http.Server.WriteTimeout during the TLS handshake, but then
+ // passes the connection off to us with the deadline already set.
+ // Write deadlines are set per stream in serverConn.newStream.
+ // Disarm the net.Conn write deadline here.
+ if sc.hs.WriteTimeout != 0 {
+ sc.conn.SetWriteDeadline(time.Time{})
+ }
+
+ if s.NewWriteScheduler != nil {
+ sc.writeSched = s.NewWriteScheduler()
+ } else {
+ sc.writeSched = NewRandomWriteScheduler()
+ }
+
+ // These start at the RFC-specified defaults. If there is a higher
+ // configured value for inflow, that will be updated when we send a
+ // WINDOW_UPDATE shortly after sending SETTINGS.
+ sc.flow.add(initialWindowSize)
+ sc.inflow.add(initialWindowSize)
+ sc.hpackEncoder = hpack.NewEncoder(&sc.headerWriteBuf)
+
+ fr := NewFramer(sc.bw, c)
+ fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
+ fr.MaxHeaderListSize = sc.maxHeaderListSize()
+ fr.SetMaxReadFrameSize(s.maxReadFrameSize())
+ sc.framer = fr
+
+ if tc, ok := c.(connectionStater); ok {
+ sc.tlsState = new(tls.ConnectionState)
+ *sc.tlsState = tc.ConnectionState()
+ // 9.2 Use of TLS Features
+ // An implementation of HTTP/2 over TLS MUST use TLS
+ // 1.2 or higher with the restrictions on feature set
+ // and cipher suite described in this section. Due to
+ // implementation limitations, it might not be
+ // possible to fail TLS negotiation. An endpoint MUST
+ // immediately terminate an HTTP/2 connection that
+ // does not meet the TLS requirements described in
+ // this section with a connection error (Section
+ // 5.4.1) of type INADEQUATE_SECURITY.
+ if sc.tlsState.Version < tls.VersionTLS12 {
+ sc.rejectConn(ErrCodeInadequateSecurity, "TLS version too low")
+ return
+ }
+
+ if sc.tlsState.ServerName == "" {
+ // Client must use SNI, but we don't enforce that anymore,
+ // since it was causing problems when connecting to bare IP
+ // addresses during development.
+ //
+ // TODO: optionally enforce? Or enforce at the time we receive
+ // a new request, and verify the ServerName matches the :authority?
+ // But that precludes proxy situations, perhaps.
+ //
+ // So for now, do nothing here again.
+ }
+
+ if !s.PermitProhibitedCipherSuites && isBadCipher(sc.tlsState.CipherSuite) {
+ // "Endpoints MAY choose to generate a connection error
+ // (Section 5.4.1) of type INADEQUATE_SECURITY if one of
+ // the prohibited cipher suites are negotiated."
+ //
+ // We choose that. In my opinion, the spec is weak
+ // here. It also says both parties must support at least
+ // TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 so there's no
+ // excuses here. If we really must, we could allow an
+ // "AllowInsecureWeakCiphers" option on the server later.
+ // Let's see how it plays out first.
+ sc.rejectConn(ErrCodeInadequateSecurity, fmt.Sprintf("Prohibited TLS 1.2 Cipher Suite: %x", sc.tlsState.CipherSuite))
+ return
+ }
+ }
+
+ if hook := testHookGetServerConn; hook != nil {
+ hook(sc)
+ }
+ sc.serve()
+}
+
+func serverConnBaseContext(c net.Conn, opts *ServeConnOpts) (ctx context.Context, cancel func()) {
+ ctx, cancel = context.WithCancel(context.Background())
+ ctx = context.WithValue(ctx, http.LocalAddrContextKey, c.LocalAddr())
+ if hs := opts.baseConfig(); hs != nil {
+ ctx = context.WithValue(ctx, http.ServerContextKey, hs)
+ }
+ return
+}
+
+func (sc *serverConn) rejectConn(err ErrCode, debug string) {
+ sc.vlogf("http2: server rejecting conn: %v, %s", err, debug)
+ // ignoring errors. hanging up anyway.
+ sc.framer.WriteGoAway(0, err, []byte(debug))
+ sc.bw.Flush()
+ sc.conn.Close()
+}
+
+type serverConn struct {
+ // Immutable:
+ srv *Server
+ hs *http.Server
+ conn net.Conn
+ bw *bufferedWriter // writing to conn
+ handler http.Handler
+ baseCtx context.Context
+ framer *Framer
+ doneServing chan struct{} // closed when serverConn.serve ends
+ readFrameCh chan readFrameResult // written by serverConn.readFrames
+ wantWriteFrameCh chan FrameWriteRequest // from handlers -> serve
+ wroteFrameCh chan frameWriteResult // from writeFrameAsync -> serve, tickles more frame writes
+ bodyReadCh chan bodyReadMsg // from handlers -> serve
+ serveMsgCh chan interface{} // misc messages & code to send to / run on the serve loop
+ flow flow // conn-wide (not stream-specific) outbound flow control
+ inflow flow // conn-wide inbound flow control
+ tlsState *tls.ConnectionState // shared by all handlers, like net/http
+ remoteAddrStr string
+ writeSched WriteScheduler
+
+ // Everything following is owned by the serve loop; use serveG.check():
+ serveG goroutineLock // used to verify funcs are on serve()
+ pushEnabled bool
+ sawFirstSettings bool // got the initial SETTINGS frame after the preface
+ needToSendSettingsAck bool
+ unackedSettings int // how many SETTINGS have we sent without ACKs?
+ clientMaxStreams uint32 // SETTINGS_MAX_CONCURRENT_STREAMS from client (our PUSH_PROMISE limit)
+ advMaxStreams uint32 // our SETTINGS_MAX_CONCURRENT_STREAMS advertised the client
+ curClientStreams uint32 // number of open streams initiated by the client
+ curPushedStreams uint32 // number of open streams initiated by server push
+ maxClientStreamID uint32 // max ever seen from client (odd), or 0 if there have been no client requests
+ maxPushPromiseID uint32 // ID of the last push promise (even), or 0 if there have been no pushes
+ streams map[uint32]*stream
+ initialStreamSendWindowSize int32
+ maxFrameSize int32
+ headerTableSize uint32
+ peerMaxHeaderListSize uint32 // zero means unknown (default)
+ canonHeader map[string]string // http2-lower-case -> Go-Canonical-Case
+ writingFrame bool // started writing a frame (on serve goroutine or separate)
+ writingFrameAsync bool // started a frame on its own goroutine but haven't heard back on wroteFrameCh
+ needsFrameFlush bool // last frame write wasn't a flush
+ inGoAway bool // we've started to or sent GOAWAY
+ inFrameScheduleLoop bool // whether we're in the scheduleFrameWrite loop
+ needToSendGoAway bool // we need to schedule a GOAWAY frame write
+ goAwayCode ErrCode
+ shutdownTimer *time.Timer // nil until used
+ idleTimer *time.Timer // nil if unused
+
+ // Owned by the writeFrameAsync goroutine:
+ headerWriteBuf bytes.Buffer
+ hpackEncoder *hpack.Encoder
+
+ // Used by startGracefulShutdown.
+ shutdownOnce sync.Once
+}
+
+func (sc *serverConn) maxHeaderListSize() uint32 {
+ n := sc.hs.MaxHeaderBytes
+ if n <= 0 {
+ n = http.DefaultMaxHeaderBytes
+ }
+ // http2's count is in a slightly different unit and includes 32 bytes per pair.
+ // So, take the net/http.Server value and pad it up a bit, assuming 10 headers.
+ const perFieldOverhead = 32 // per http2 spec
+ const typicalHeaders = 10 // conservative
+ return uint32(n + typicalHeaders*perFieldOverhead)
+}
+
+func (sc *serverConn) curOpenStreams() uint32 {
+ sc.serveG.check()
+ return sc.curClientStreams + sc.curPushedStreams
+}
+
+// stream represents a stream. This is the minimal metadata needed by
+// the serve goroutine. Most of the actual stream state is owned by
+// the http.Handler's goroutine in the responseWriter. Because the
+// responseWriter's responseWriterState is recycled at the end of a
+// handler, this struct intentionally has no pointer to the
+// *responseWriter{,State} itself, as the Handler ending nils out the
+// responseWriter's state field.
+type stream struct {
+ // immutable:
+ sc *serverConn
+ id uint32
+ body *pipe // non-nil if expecting DATA frames
+ cw closeWaiter // closed wait stream transitions to closed state
+ ctx context.Context
+ cancelCtx func()
+
+ // owned by serverConn's serve loop:
+ bodyBytes int64 // body bytes seen so far
+ declBodyBytes int64 // or -1 if undeclared
+ flow flow // limits writing from Handler to client
+ inflow flow // what the client is allowed to POST/etc to us
+ parent *stream // or nil
+ numTrailerValues int64
+ weight uint8
+ state streamState
+ resetQueued bool // RST_STREAM queued for write; set by sc.resetStream
+ gotTrailerHeader bool // HEADER frame for trailers was seen
+ wroteHeaders bool // whether we wrote headers (not status 100)
+ writeDeadline *time.Timer // nil if unused
+
+ trailer http.Header // accumulated trailers
+ reqTrailer http.Header // handler's Request.Trailer
+}
+
+func (sc *serverConn) Framer() *Framer { return sc.framer }
+func (sc *serverConn) CloseConn() error { return sc.conn.Close() }
+func (sc *serverConn) Flush() error { return sc.bw.Flush() }
+func (sc *serverConn) HeaderEncoder() (*hpack.Encoder, *bytes.Buffer) {
+ return sc.hpackEncoder, &sc.headerWriteBuf
+}
+
+func (sc *serverConn) state(streamID uint32) (streamState, *stream) {
+ sc.serveG.check()
+ // http://tools.ietf.org/html/rfc7540#section-5.1
+ if st, ok := sc.streams[streamID]; ok {
+ return st.state, st
+ }
+ // "The first use of a new stream identifier implicitly closes all
+ // streams in the "idle" state that might have been initiated by
+ // that peer with a lower-valued stream identifier. For example, if
+ // a client sends a HEADERS frame on stream 7 without ever sending a
+ // frame on stream 5, then stream 5 transitions to the "closed"
+ // state when the first frame for stream 7 is sent or received."
+ if streamID%2 == 1 {
+ if streamID <= sc.maxClientStreamID {
+ return stateClosed, nil
+ }
+ } else {
+ if streamID <= sc.maxPushPromiseID {
+ return stateClosed, nil
+ }
+ }
+ return stateIdle, nil
+}
+
+// setConnState calls the net/http ConnState hook for this connection, if configured.
+// Note that the net/http package does StateNew and StateClosed for us.
+// There is currently no plan for StateHijacked or hijacking HTTP/2 connections.
+func (sc *serverConn) setConnState(state http.ConnState) {
+ if sc.hs.ConnState != nil {
+ sc.hs.ConnState(sc.conn, state)
+ }
+}
+
+func (sc *serverConn) vlogf(format string, args ...interface{}) {
+ if VerboseLogs {
+ sc.logf(format, args...)
+ }
+}
+
+func (sc *serverConn) logf(format string, args ...interface{}) {
+ if lg := sc.hs.ErrorLog; lg != nil {
+ lg.Printf(format, args...)
+ } else {
+ log.Printf(format, args...)
+ }
+}
+
+// errno returns v's underlying uintptr, else 0.
+//
+// TODO: remove this helper function once http2 can use build
+// tags. See comment in isClosedConnError.
+func errno(v error) uintptr {
+ if rv := reflect.ValueOf(v); rv.Kind() == reflect.Uintptr {
+ return uintptr(rv.Uint())
+ }
+ return 0
+}
+
+// isClosedConnError reports whether err is an error from use of a closed
+// network connection.
+func isClosedConnError(err error) bool {
+ if err == nil {
+ return false
+ }
+
+ // TODO: remove this string search and be more like the Windows
+ // case below. That might involve modifying the standard library
+ // to return better error types.
+ str := err.Error()
+ if strings.Contains(str, "use of closed network connection") {
+ return true
+ }
+
+ // TODO(bradfitz): x/tools/cmd/bundle doesn't really support
+ // build tags, so I can't make an http2_windows.go file with
+ // Windows-specific stuff. Fix that and move this, once we
+ // have a way to bundle this into std's net/http somehow.
+ if runtime.GOOS == "windows" {
+ if oe, ok := err.(*net.OpError); ok && oe.Op == "read" {
+ if se, ok := oe.Err.(*os.SyscallError); ok && se.Syscall == "wsarecv" {
+ const WSAECONNABORTED = 10053
+ const WSAECONNRESET = 10054
+ if n := errno(se.Err); n == WSAECONNRESET || n == WSAECONNABORTED {
+ return true
+ }
+ }
+ }
+ }
+ return false
+}
+
+func (sc *serverConn) condlogf(err error, format string, args ...interface{}) {
+ if err == nil {
+ return
+ }
+ if err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err) || err == errPrefaceTimeout {
+ // Boring, expected errors.
+ sc.vlogf(format, args...)
+ } else {
+ sc.logf(format, args...)
+ }
+}
+
+func (sc *serverConn) canonicalHeader(v string) string {
+ sc.serveG.check()
+ buildCommonHeaderMapsOnce()
+ cv, ok := commonCanonHeader[v]
+ if ok {
+ return cv
+ }
+ cv, ok = sc.canonHeader[v]
+ if ok {
+ return cv
+ }
+ if sc.canonHeader == nil {
+ sc.canonHeader = make(map[string]string)
+ }
+ cv = http.CanonicalHeaderKey(v)
+ sc.canonHeader[v] = cv
+ return cv
+}
+
+type readFrameResult struct {
+ f Frame // valid until readMore is called
+ err error
+
+ // readMore should be called once the consumer no longer needs or
+ // retains f. After readMore, f is invalid and more frames can be
+ // read.
+ readMore func()
+}
+
+// readFrames is the loop that reads incoming frames.
+// It takes care to only read one frame at a time, blocking until the
+// consumer is done with the frame.
+// It's run on its own goroutine.
+func (sc *serverConn) readFrames() {
+ gate := make(gate)
+ gateDone := gate.Done
+ for {
+ f, err := sc.framer.ReadFrame()
+ select {
+ case sc.readFrameCh <- readFrameResult{f, err, gateDone}:
+ case <-sc.doneServing:
+ return
+ }
+ select {
+ case <-gate:
+ case <-sc.doneServing:
+ return
+ }
+ if terminalReadFrameError(err) {
+ return
+ }
+ }
+}
+
+// frameWriteResult is the message passed from writeFrameAsync to the serve goroutine.
+type frameWriteResult struct {
+ wr FrameWriteRequest // what was written (or attempted)
+ err error // result of the writeFrame call
+}
+
+// writeFrameAsync runs in its own goroutine and writes a single frame
+// and then reports when it's done.
+// At most one goroutine can be running writeFrameAsync at a time per
+// serverConn.
+func (sc *serverConn) writeFrameAsync(wr FrameWriteRequest) {
+ err := wr.write.writeFrame(sc)
+ sc.wroteFrameCh <- frameWriteResult{wr, err}
+}
+
+func (sc *serverConn) closeAllStreamsOnConnClose() {
+ sc.serveG.check()
+ for _, st := range sc.streams {
+ sc.closeStream(st, errClientDisconnected)
+ }
+}
+
+func (sc *serverConn) stopShutdownTimer() {
+ sc.serveG.check()
+ if t := sc.shutdownTimer; t != nil {
+ t.Stop()
+ }
+}
+
+func (sc *serverConn) notePanic() {
+ // Note: this is for serverConn.serve panicking, not http.Handler code.
+ if testHookOnPanicMu != nil {
+ testHookOnPanicMu.Lock()
+ defer testHookOnPanicMu.Unlock()
+ }
+ if testHookOnPanic != nil {
+ if e := recover(); e != nil {
+ if testHookOnPanic(sc, e) {
+ panic(e)
+ }
+ }
+ }
+}
+
+func (sc *serverConn) serve() {
+ sc.serveG.check()
+ defer sc.notePanic()
+ defer sc.conn.Close()
+ defer sc.closeAllStreamsOnConnClose()
+ defer sc.stopShutdownTimer()
+ defer close(sc.doneServing) // unblocks handlers trying to send
+
+ if VerboseLogs {
+ sc.vlogf("http2: server connection from %v on %p", sc.conn.RemoteAddr(), sc.hs)
+ }
+
+ sc.writeFrame(FrameWriteRequest{
+ write: writeSettings{
+ {SettingMaxFrameSize, sc.srv.maxReadFrameSize()},
+ {SettingMaxConcurrentStreams, sc.advMaxStreams},
+ {SettingMaxHeaderListSize, sc.maxHeaderListSize()},
+ {SettingInitialWindowSize, uint32(sc.srv.initialStreamRecvWindowSize())},
+ },
+ })
+ sc.unackedSettings++
+
+ // Each connection starts with intialWindowSize inflow tokens.
+ // If a higher value is configured, we add more tokens.
+ if diff := sc.srv.initialConnRecvWindowSize() - initialWindowSize; diff > 0 {
+ sc.sendWindowUpdate(nil, int(diff))
+ }
+
+ if err := sc.readPreface(); err != nil {
+ sc.condlogf(err, "http2: server: error reading preface from client %v: %v", sc.conn.RemoteAddr(), err)
+ return
+ }
+ // Now that we've got the preface, get us out of the
+ // "StateNew" state. We can't go directly to idle, though.
+ // Active means we read some data and anticipate a request. We'll
+ // do another Active when we get a HEADERS frame.
+ sc.setConnState(http.StateActive)
+ sc.setConnState(http.StateIdle)
+
+ if sc.srv.IdleTimeout != 0 {
+ sc.idleTimer = time.AfterFunc(sc.srv.IdleTimeout, sc.onIdleTimer)
+ defer sc.idleTimer.Stop()
+ }
+
+ go sc.readFrames() // closed by defer sc.conn.Close above
+
+ settingsTimer := time.AfterFunc(firstSettingsTimeout, sc.onSettingsTimer)
+ defer settingsTimer.Stop()
+
+ loopNum := 0
+ for {
+ loopNum++
+ select {
+ case wr := <-sc.wantWriteFrameCh:
+ if se, ok := wr.write.(StreamError); ok {
+ sc.resetStream(se)
+ break
+ }
+ sc.writeFrame(wr)
+ case res := <-sc.wroteFrameCh:
+ sc.wroteFrame(res)
+ case res := <-sc.readFrameCh:
+ if !sc.processFrameFromReader(res) {
+ return
+ }
+ res.readMore()
+ if settingsTimer != nil {
+ settingsTimer.Stop()
+ settingsTimer = nil
+ }
+ case m := <-sc.bodyReadCh:
+ sc.noteBodyRead(m.st, m.n)
+ case msg := <-sc.serveMsgCh:
+ switch v := msg.(type) {
+ case func(int):
+ v(loopNum) // for testing
+ case *serverMessage:
+ switch v {
+ case settingsTimerMsg:
+ sc.logf("timeout waiting for SETTINGS frames from %v", sc.conn.RemoteAddr())
+ return
+ case idleTimerMsg:
+ sc.vlogf("connection is idle")
+ sc.goAway(ErrCodeNo)
+ case shutdownTimerMsg:
+ sc.vlogf("GOAWAY close timer fired; closing conn from %v", sc.conn.RemoteAddr())
+ return
+ case gracefulShutdownMsg:
+ sc.startGracefulShutdownInternal()
+ default:
+ panic("unknown timer")
+ }
+ case *startPushRequest:
+ sc.startPush(v)
+ default:
+ panic(fmt.Sprintf("unexpected type %T", v))
+ }
+ }
+
+ // Start the shutdown timer after sending a GOAWAY. When sending GOAWAY
+ // with no error code (graceful shutdown), don't start the timer until
+ // all open streams have been completed.
+ sentGoAway := sc.inGoAway && !sc.needToSendGoAway && !sc.writingFrame
+ gracefulShutdownComplete := sc.goAwayCode == ErrCodeNo && sc.curOpenStreams() == 0
+ if sentGoAway && sc.shutdownTimer == nil && (sc.goAwayCode != ErrCodeNo || gracefulShutdownComplete) {
+ sc.shutDownIn(goAwayTimeout)
+ }
+ }
+}
+
+func (sc *serverConn) awaitGracefulShutdown(sharedCh <-chan struct{}, privateCh chan struct{}) {
+ select {
+ case <-sc.doneServing:
+ case <-sharedCh:
+ close(privateCh)
+ }
+}
+
+type serverMessage int
+
+// Message values sent to serveMsgCh.
+var (
+ settingsTimerMsg = new(serverMessage)
+ idleTimerMsg = new(serverMessage)
+ shutdownTimerMsg = new(serverMessage)
+ gracefulShutdownMsg = new(serverMessage)
+)
+
+func (sc *serverConn) onSettingsTimer() { sc.sendServeMsg(settingsTimerMsg) }
+func (sc *serverConn) onIdleTimer() { sc.sendServeMsg(idleTimerMsg) }
+func (sc *serverConn) onShutdownTimer() { sc.sendServeMsg(shutdownTimerMsg) }
+
+func (sc *serverConn) sendServeMsg(msg interface{}) {
+ sc.serveG.checkNotOn() // NOT
+ select {
+ case sc.serveMsgCh <- msg:
+ case <-sc.doneServing:
+ }
+}
+
+var errPrefaceTimeout = errors.New("timeout waiting for client preface")
+
+// readPreface reads the ClientPreface greeting from the peer or
+// returns errPrefaceTimeout on timeout, or an error if the greeting
+// is invalid.
+func (sc *serverConn) readPreface() error {
+ errc := make(chan error, 1)
+ go func() {
+ // Read the client preface
+ buf := make([]byte, len(ClientPreface))
+ if _, err := io.ReadFull(sc.conn, buf); err != nil {
+ errc <- err
+ } else if !bytes.Equal(buf, clientPreface) {
+ errc <- fmt.Errorf("bogus greeting %q", buf)
+ } else {
+ errc <- nil
+ }
+ }()
+ timer := time.NewTimer(prefaceTimeout) // TODO: configurable on *Server?
+ defer timer.Stop()
+ select {
+ case <-timer.C:
+ return errPrefaceTimeout
+ case err := <-errc:
+ if err == nil {
+ if VerboseLogs {
+ sc.vlogf("http2: server: client %v said hello", sc.conn.RemoteAddr())
+ }
+ }
+ return err
+ }
+}
+
+var errChanPool = sync.Pool{
+ New: func() interface{} { return make(chan error, 1) },
+}
+
+var writeDataPool = sync.Pool{
+ New: func() interface{} { return new(writeData) },
+}
+
+// writeDataFromHandler writes DATA response frames from a handler on
+// the given stream.
+func (sc *serverConn) writeDataFromHandler(stream *stream, data []byte, endStream bool) error {
+ ch := errChanPool.Get().(chan error)
+ writeArg := writeDataPool.Get().(*writeData)
+ *writeArg = writeData{stream.id, data, endStream}
+ err := sc.writeFrameFromHandler(FrameWriteRequest{
+ write: writeArg,
+ stream: stream,
+ done: ch,
+ })
+ if err != nil {
+ return err
+ }
+ var frameWriteDone bool // the frame write is done (successfully or not)
+ select {
+ case err = <-ch:
+ frameWriteDone = true
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-stream.cw:
+ // If both ch and stream.cw were ready (as might
+ // happen on the final Write after an http.Handler
+ // ends), prefer the write result. Otherwise this
+ // might just be us successfully closing the stream.
+ // The writeFrameAsync and serve goroutines guarantee
+ // that the ch send will happen before the stream.cw
+ // close.
+ select {
+ case err = <-ch:
+ frameWriteDone = true
+ default:
+ return errStreamClosed
+ }
+ }
+ errChanPool.Put(ch)
+ if frameWriteDone {
+ writeDataPool.Put(writeArg)
+ }
+ return err
+}
+
+// writeFrameFromHandler sends wr to sc.wantWriteFrameCh, but aborts
+// if the connection has gone away.
+//
+// This must not be run from the serve goroutine itself, else it might
+// deadlock writing to sc.wantWriteFrameCh (which is only mildly
+// buffered and is read by serve itself). If you're on the serve
+// goroutine, call writeFrame instead.
+func (sc *serverConn) writeFrameFromHandler(wr FrameWriteRequest) error {
+ sc.serveG.checkNotOn() // NOT
+ select {
+ case sc.wantWriteFrameCh <- wr:
+ return nil
+ case <-sc.doneServing:
+ // Serve loop is gone.
+ // Client has closed their connection to the server.
+ return errClientDisconnected
+ }
+}
+
+// writeFrame schedules a frame to write and sends it if there's nothing
+// already being written.
+//
+// There is no pushback here (the serve goroutine never blocks). It's
+// the http.Handlers that block, waiting for their previous frames to
+// make it onto the wire
+//
+// If you're not on the serve goroutine, use writeFrameFromHandler instead.
+func (sc *serverConn) writeFrame(wr FrameWriteRequest) {
+ sc.serveG.check()
+
+ // If true, wr will not be written and wr.done will not be signaled.
+ var ignoreWrite bool
+
+ // We are not allowed to write frames on closed streams. RFC 7540 Section
+ // 5.1.1 says: "An endpoint MUST NOT send frames other than PRIORITY on
+ // a closed stream." Our server never sends PRIORITY, so that exception
+ // does not apply.
+ //
+ // The serverConn might close an open stream while the stream's handler
+ // is still running. For example, the server might close a stream when it
+ // receives bad data from the client. If this happens, the handler might
+ // attempt to write a frame after the stream has been closed (since the
+ // handler hasn't yet been notified of the close). In this case, we simply
+ // ignore the frame. The handler will notice that the stream is closed when
+ // it waits for the frame to be written.
+ //
+ // As an exception to this rule, we allow sending RST_STREAM after close.
+ // This allows us to immediately reject new streams without tracking any
+ // state for those streams (except for the queued RST_STREAM frame). This
+ // may result in duplicate RST_STREAMs in some cases, but the client should
+ // ignore those.
+ if wr.StreamID() != 0 {
+ _, isReset := wr.write.(StreamError)
+ if state, _ := sc.state(wr.StreamID()); state == stateClosed && !isReset {
+ ignoreWrite = true
+ }
+ }
+
+ // Don't send a 100-continue response if we've already sent headers.
+ // See golang.org/issue/14030.
+ switch wr.write.(type) {
+ case *writeResHeaders:
+ wr.stream.wroteHeaders = true
+ case write100ContinueHeadersFrame:
+ if wr.stream.wroteHeaders {
+ // We do not need to notify wr.done because this frame is
+ // never written with wr.done != nil.
+ if wr.done != nil {
+ panic("wr.done != nil for write100ContinueHeadersFrame")
+ }
+ ignoreWrite = true
+ }
+ }
+
+ if !ignoreWrite {
+ sc.writeSched.Push(wr)
+ }
+ sc.scheduleFrameWrite()
+}
+
+// startFrameWrite starts a goroutine to write wr (in a separate
+// goroutine since that might block on the network), and updates the
+// serve goroutine's state about the world, updated from info in wr.
+func (sc *serverConn) startFrameWrite(wr FrameWriteRequest) {
+ sc.serveG.check()
+ if sc.writingFrame {
+ panic("internal error: can only be writing one frame at a time")
+ }
+
+ st := wr.stream
+ if st != nil {
+ switch st.state {
+ case stateHalfClosedLocal:
+ switch wr.write.(type) {
+ case StreamError, handlerPanicRST, writeWindowUpdate:
+ // RFC 7540 Section 5.1 allows sending RST_STREAM, PRIORITY, and WINDOW_UPDATE
+ // in this state. (We never send PRIORITY from the server, so that is not checked.)
+ default:
+ panic(fmt.Sprintf("internal error: attempt to send frame on a half-closed-local stream: %v", wr))
+ }
+ case stateClosed:
+ panic(fmt.Sprintf("internal error: attempt to send frame on a closed stream: %v", wr))
+ }
+ }
+ if wpp, ok := wr.write.(*writePushPromise); ok {
+ var err error
+ wpp.promisedID, err = wpp.allocatePromisedID()
+ if err != nil {
+ sc.writingFrameAsync = false
+ wr.replyToWriter(err)
+ return
+ }
+ }
+
+ sc.writingFrame = true
+ sc.needsFrameFlush = true
+ if wr.write.staysWithinBuffer(sc.bw.Available()) {
+ sc.writingFrameAsync = false
+ err := wr.write.writeFrame(sc)
+ sc.wroteFrame(frameWriteResult{wr, err})
+ } else {
+ sc.writingFrameAsync = true
+ go sc.writeFrameAsync(wr)
+ }
+}
+
+// errHandlerPanicked is the error given to any callers blocked in a read from
+// Request.Body when the main goroutine panics. Since most handlers read in the
+// main ServeHTTP goroutine, this will show up rarely.
+var errHandlerPanicked = errors.New("http2: handler panicked")
+
+// wroteFrame is called on the serve goroutine with the result of
+// whatever happened on writeFrameAsync.
+func (sc *serverConn) wroteFrame(res frameWriteResult) {
+ sc.serveG.check()
+ if !sc.writingFrame {
+ panic("internal error: expected to be already writing a frame")
+ }
+ sc.writingFrame = false
+ sc.writingFrameAsync = false
+
+ wr := res.wr
+
+ if writeEndsStream(wr.write) {
+ st := wr.stream
+ if st == nil {
+ panic("internal error: expecting non-nil stream")
+ }
+ switch st.state {
+ case stateOpen:
+ // Here we would go to stateHalfClosedLocal in
+ // theory, but since our handler is done and
+ // the net/http package provides no mechanism
+ // for closing a ResponseWriter while still
+ // reading data (see possible TODO at top of
+ // this file), we go into closed state here
+ // anyway, after telling the peer we're
+ // hanging up on them. We'll transition to
+ // stateClosed after the RST_STREAM frame is
+ // written.
+ st.state = stateHalfClosedLocal
+ // Section 8.1: a server MAY request that the client abort
+ // transmission of a request without error by sending a
+ // RST_STREAM with an error code of NO_ERROR after sending
+ // a complete response.
+ sc.resetStream(streamError(st.id, ErrCodeNo))
+ case stateHalfClosedRemote:
+ sc.closeStream(st, errHandlerComplete)
+ }
+ } else {
+ switch v := wr.write.(type) {
+ case StreamError:
+ // st may be unknown if the RST_STREAM was generated to reject bad input.
+ if st, ok := sc.streams[v.StreamID]; ok {
+ sc.closeStream(st, v)
+ }
+ case handlerPanicRST:
+ sc.closeStream(wr.stream, errHandlerPanicked)
+ }
+ }
+
+ // Reply (if requested) to unblock the ServeHTTP goroutine.
+ wr.replyToWriter(res.err)
+
+ sc.scheduleFrameWrite()
+}
+
+// scheduleFrameWrite tickles the frame writing scheduler.
+//
+// If a frame is already being written, nothing happens. This will be called again
+// when the frame is done being written.
+//
+// If a frame isn't being written we need to send one, the best frame
+// to send is selected, preferring first things that aren't
+// stream-specific (e.g. ACKing settings), and then finding the
+// highest priority stream.
+//
+// If a frame isn't being written and there's nothing else to send, we
+// flush the write buffer.
+func (sc *serverConn) scheduleFrameWrite() {
+ sc.serveG.check()
+ if sc.writingFrame || sc.inFrameScheduleLoop {
+ return
+ }
+ sc.inFrameScheduleLoop = true
+ for !sc.writingFrameAsync {
+ if sc.needToSendGoAway {
+ sc.needToSendGoAway = false
+ sc.startFrameWrite(FrameWriteRequest{
+ write: &writeGoAway{
+ maxStreamID: sc.maxClientStreamID,
+ code: sc.goAwayCode,
+ },
+ })
+ continue
+ }
+ if sc.needToSendSettingsAck {
+ sc.needToSendSettingsAck = false
+ sc.startFrameWrite(FrameWriteRequest{write: writeSettingsAck{}})
+ continue
+ }
+ if !sc.inGoAway || sc.goAwayCode == ErrCodeNo {
+ if wr, ok := sc.writeSched.Pop(); ok {
+ sc.startFrameWrite(wr)
+ continue
+ }
+ }
+ if sc.needsFrameFlush {
+ sc.startFrameWrite(FrameWriteRequest{write: flushFrameWriter{}})
+ sc.needsFrameFlush = false // after startFrameWrite, since it sets this true
+ continue
+ }
+ break
+ }
+ sc.inFrameScheduleLoop = false
+}
+
+// startGracefulShutdown gracefully shuts down a connection. This
+// sends GOAWAY with ErrCodeNo to tell the client we're gracefully
+// shutting down. The connection isn't closed until all current
+// streams are done.
+//
+// startGracefulShutdown returns immediately; it does not wait until
+// the connection has shut down.
+func (sc *serverConn) startGracefulShutdown() {
+ sc.serveG.checkNotOn() // NOT
+ sc.shutdownOnce.Do(func() { sc.sendServeMsg(gracefulShutdownMsg) })
+}
+
+// After sending GOAWAY, the connection will close after goAwayTimeout.
+// If we close the connection immediately after sending GOAWAY, there may
+// be unsent data in our kernel receive buffer, which will cause the kernel
+// to send a TCP RST on close() instead of a FIN. This RST will abort the
+// connection immediately, whether or not the client had received the GOAWAY.
+//
+// Ideally we should delay for at least 1 RTT + epsilon so the client has
+// a chance to read the GOAWAY and stop sending messages. Measuring RTT
+// is hard, so we approximate with 1 second. See golang.org/issue/18701.
+//
+// This is a var so it can be shorter in tests, where all requests uses the
+// loopback interface making the expected RTT very small.
+//
+// TODO: configurable?
+var goAwayTimeout = 1 * time.Second
+
+func (sc *serverConn) startGracefulShutdownInternal() {
+ sc.goAway(ErrCodeNo)
+}
+
+func (sc *serverConn) goAway(code ErrCode) {
+ sc.serveG.check()
+ if sc.inGoAway {
+ return
+ }
+ sc.inGoAway = true
+ sc.needToSendGoAway = true
+ sc.goAwayCode = code
+ sc.scheduleFrameWrite()
+}
+
+func (sc *serverConn) shutDownIn(d time.Duration) {
+ sc.serveG.check()
+ sc.shutdownTimer = time.AfterFunc(d, sc.onShutdownTimer)
+}
+
+func (sc *serverConn) resetStream(se StreamError) {
+ sc.serveG.check()
+ sc.writeFrame(FrameWriteRequest{write: se})
+ if st, ok := sc.streams[se.StreamID]; ok {
+ st.resetQueued = true
+ }
+}
+
+// processFrameFromReader processes the serve loop's read from readFrameCh from the
+// frame-reading goroutine.
+// processFrameFromReader returns whether the connection should be kept open.
+func (sc *serverConn) processFrameFromReader(res readFrameResult) bool {
+ sc.serveG.check()
+ err := res.err
+ if err != nil {
+ if err == ErrFrameTooLarge {
+ sc.goAway(ErrCodeFrameSize)
+ return true // goAway will close the loop
+ }
+ clientGone := err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err)
+ if clientGone {
+ // TODO: could we also get into this state if
+ // the peer does a half close
+ // (e.g. CloseWrite) because they're done
+ // sending frames but they're still wanting
+ // our open replies? Investigate.
+ // TODO: add CloseWrite to crypto/tls.Conn first
+ // so we have a way to test this? I suppose
+ // just for testing we could have a non-TLS mode.
+ return false
+ }
+ } else {
+ f := res.f
+ if VerboseLogs {
+ sc.vlogf("http2: server read frame %v", summarizeFrame(f))
+ }
+ err = sc.processFrame(f)
+ if err == nil {
+ return true
+ }
+ }
+
+ switch ev := err.(type) {
+ case StreamError:
+ sc.resetStream(ev)
+ return true
+ case goAwayFlowError:
+ sc.goAway(ErrCodeFlowControl)
+ return true
+ case ConnectionError:
+ sc.logf("http2: server connection error from %v: %v", sc.conn.RemoteAddr(), ev)
+ sc.goAway(ErrCode(ev))
+ return true // goAway will handle shutdown
+ default:
+ if res.err != nil {
+ sc.vlogf("http2: server closing client connection; error reading frame from client %s: %v", sc.conn.RemoteAddr(), err)
+ } else {
+ sc.logf("http2: server closing client connection: %v", err)
+ }
+ return false
+ }
+}
+
+func (sc *serverConn) processFrame(f Frame) error {
+ sc.serveG.check()
+
+ // First frame received must be SETTINGS.
+ if !sc.sawFirstSettings {
+ if _, ok := f.(*SettingsFrame); !ok {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ sc.sawFirstSettings = true
+ }
+
+ switch f := f.(type) {
+ case *SettingsFrame:
+ return sc.processSettings(f)
+ case *MetaHeadersFrame:
+ return sc.processHeaders(f)
+ case *WindowUpdateFrame:
+ return sc.processWindowUpdate(f)
+ case *PingFrame:
+ return sc.processPing(f)
+ case *DataFrame:
+ return sc.processData(f)
+ case *RSTStreamFrame:
+ return sc.processResetStream(f)
+ case *PriorityFrame:
+ return sc.processPriority(f)
+ case *GoAwayFrame:
+ return sc.processGoAway(f)
+ case *PushPromiseFrame:
+ // A client cannot push. Thus, servers MUST treat the receipt of a PUSH_PROMISE
+ // frame as a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+ return ConnectionError(ErrCodeProtocol)
+ default:
+ sc.vlogf("http2: server ignoring frame: %v", f.Header())
+ return nil
+ }
+}
+
+func (sc *serverConn) processPing(f *PingFrame) error {
+ sc.serveG.check()
+ if f.IsAck() {
+ // 6.7 PING: " An endpoint MUST NOT respond to PING frames
+ // containing this flag."
+ return nil
+ }
+ if f.StreamID != 0 {
+ // "PING frames are not associated with any individual
+ // stream. If a PING frame is received with a stream
+ // identifier field value other than 0x0, the recipient MUST
+ // respond with a connection error (Section 5.4.1) of type
+ // PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+ return nil
+ }
+ sc.writeFrame(FrameWriteRequest{write: writePingAck{f}})
+ return nil
+}
+
+func (sc *serverConn) processWindowUpdate(f *WindowUpdateFrame) error {
+ sc.serveG.check()
+ switch {
+ case f.StreamID != 0: // stream-level flow control
+ state, st := sc.state(f.StreamID)
+ if state == stateIdle {
+ // Section 5.1: "Receiving any frame other than HEADERS
+ // or PRIORITY on a stream in this state MUST be
+ // treated as a connection error (Section 5.4.1) of
+ // type PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if st == nil {
+ // "WINDOW_UPDATE can be sent by a peer that has sent a
+ // frame bearing the END_STREAM flag. This means that a
+ // receiver could receive a WINDOW_UPDATE frame on a "half
+ // closed (remote)" or "closed" stream. A receiver MUST
+ // NOT treat this as an error, see Section 5.1."
+ return nil
+ }
+ if !st.flow.add(int32(f.Increment)) {
+ return streamError(f.StreamID, ErrCodeFlowControl)
+ }
+ default: // connection-level flow control
+ if !sc.flow.add(int32(f.Increment)) {
+ return goAwayFlowError{}
+ }
+ }
+ sc.scheduleFrameWrite()
+ return nil
+}
+
+func (sc *serverConn) processResetStream(f *RSTStreamFrame) error {
+ sc.serveG.check()
+
+ state, st := sc.state(f.StreamID)
+ if state == stateIdle {
+ // 6.4 "RST_STREAM frames MUST NOT be sent for a
+ // stream in the "idle" state. If a RST_STREAM frame
+ // identifying an idle stream is received, the
+ // recipient MUST treat this as a connection error
+ // (Section 5.4.1) of type PROTOCOL_ERROR.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if st != nil {
+ st.cancelCtx()
+ sc.closeStream(st, streamError(f.StreamID, f.ErrCode))
+ }
+ return nil
+}
+
+func (sc *serverConn) closeStream(st *stream, err error) {
+ sc.serveG.check()
+ if st.state == stateIdle || st.state == stateClosed {
+ panic(fmt.Sprintf("invariant; can't close stream in state %v", st.state))
+ }
+ st.state = stateClosed
+ if st.writeDeadline != nil {
+ st.writeDeadline.Stop()
+ }
+ if st.isPushed() {
+ sc.curPushedStreams--
+ } else {
+ sc.curClientStreams--
+ }
+ delete(sc.streams, st.id)
+ if len(sc.streams) == 0 {
+ sc.setConnState(http.StateIdle)
+ if sc.srv.IdleTimeout != 0 {
+ sc.idleTimer.Reset(sc.srv.IdleTimeout)
+ }
+ if h1ServerKeepAlivesDisabled(sc.hs) {
+ sc.startGracefulShutdownInternal()
+ }
+ }
+ if p := st.body; p != nil {
+ // Return any buffered unread bytes worth of conn-level flow control.
+ // See golang.org/issue/16481
+ sc.sendWindowUpdate(nil, p.Len())
+
+ p.CloseWithError(err)
+ }
+ st.cw.Close() // signals Handler's CloseNotifier, unblocks writes, etc
+ sc.writeSched.CloseStream(st.id)
+}
+
+func (sc *serverConn) processSettings(f *SettingsFrame) error {
+ sc.serveG.check()
+ if f.IsAck() {
+ sc.unackedSettings--
+ if sc.unackedSettings < 0 {
+ // Why is the peer ACKing settings we never sent?
+ // The spec doesn't mention this case, but
+ // hang up on them anyway.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ return nil
+ }
+ if f.NumSettings() > 100 || f.HasDuplicates() {
+ // This isn't actually in the spec, but hang up on
+ // suspiciously large settings frames or those with
+ // duplicate entries.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if err := f.ForeachSetting(sc.processSetting); err != nil {
+ return err
+ }
+ sc.needToSendSettingsAck = true
+ sc.scheduleFrameWrite()
+ return nil
+}
+
+func (sc *serverConn) processSetting(s Setting) error {
+ sc.serveG.check()
+ if err := s.Valid(); err != nil {
+ return err
+ }
+ if VerboseLogs {
+ sc.vlogf("http2: server processing setting %v", s)
+ }
+ switch s.ID {
+ case SettingHeaderTableSize:
+ sc.headerTableSize = s.Val
+ sc.hpackEncoder.SetMaxDynamicTableSize(s.Val)
+ case SettingEnablePush:
+ sc.pushEnabled = s.Val != 0
+ case SettingMaxConcurrentStreams:
+ sc.clientMaxStreams = s.Val
+ case SettingInitialWindowSize:
+ return sc.processSettingInitialWindowSize(s.Val)
+ case SettingMaxFrameSize:
+ sc.maxFrameSize = int32(s.Val) // the maximum valid s.Val is < 2^31
+ case SettingMaxHeaderListSize:
+ sc.peerMaxHeaderListSize = s.Val
+ default:
+ // Unknown setting: "An endpoint that receives a SETTINGS
+ // frame with any unknown or unsupported identifier MUST
+ // ignore that setting."
+ if VerboseLogs {
+ sc.vlogf("http2: server ignoring unknown setting %v", s)
+ }
+ }
+ return nil
+}
+
+func (sc *serverConn) processSettingInitialWindowSize(val uint32) error {
+ sc.serveG.check()
+ // Note: val already validated to be within range by
+ // processSetting's Valid call.
+
+ // "A SETTINGS frame can alter the initial flow control window
+ // size for all current streams. When the value of
+ // SETTINGS_INITIAL_WINDOW_SIZE changes, a receiver MUST
+ // adjust the size of all stream flow control windows that it
+ // maintains by the difference between the new value and the
+ // old value."
+ old := sc.initialStreamSendWindowSize
+ sc.initialStreamSendWindowSize = int32(val)
+ growth := int32(val) - old // may be negative
+ for _, st := range sc.streams {
+ if !st.flow.add(growth) {
+ // 6.9.2 Initial Flow Control Window Size
+ // "An endpoint MUST treat a change to
+ // SETTINGS_INITIAL_WINDOW_SIZE that causes any flow
+ // control window to exceed the maximum size as a
+ // connection error (Section 5.4.1) of type
+ // FLOW_CONTROL_ERROR."
+ return ConnectionError(ErrCodeFlowControl)
+ }
+ }
+ return nil
+}
+
+func (sc *serverConn) processData(f *DataFrame) error {
+ sc.serveG.check()
+ if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+ return nil
+ }
+ data := f.Data()
+
+ // "If a DATA frame is received whose stream is not in "open"
+ // or "half closed (local)" state, the recipient MUST respond
+ // with a stream error (Section 5.4.2) of type STREAM_CLOSED."
+ id := f.Header().StreamID
+ state, st := sc.state(id)
+ if id == 0 || state == stateIdle {
+ // Section 5.1: "Receiving any frame other than HEADERS
+ // or PRIORITY on a stream in this state MUST be
+ // treated as a connection error (Section 5.4.1) of
+ // type PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+ }
+ // RFC 7540, sec 6.1: If a DATA frame is received whose stream is not in
+ // "open" or "half-closed (local)" state, the recipient MUST respond with a
+ // stream error (Section 5.4.2) of type STREAM_CLOSED.
+ if state == stateClosed {
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ if st == nil || state != stateOpen || st.gotTrailerHeader || st.resetQueued {
+ // This includes sending a RST_STREAM if the stream is
+ // in stateHalfClosedLocal (which currently means that
+ // the http.Handler returned, so it's done reading &
+ // done writing). Try to stop the client from sending
+ // more DATA.
+
+ // But still enforce their connection-level flow control,
+ // and return any flow control bytes since we're not going
+ // to consume them.
+ if sc.inflow.available() < int32(f.Length) {
+ return streamError(id, ErrCodeFlowControl)
+ }
+ // Deduct the flow control from inflow, since we're
+ // going to immediately add it back in
+ // sendWindowUpdate, which also schedules sending the
+ // frames.
+ sc.inflow.take(int32(f.Length))
+ sc.sendWindowUpdate(nil, int(f.Length)) // conn-level
+
+ if st != nil && st.resetQueued {
+ // Already have a stream error in flight. Don't send another.
+ return nil
+ }
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ if st.body == nil {
+ panic("internal error: should have a body in this state")
+ }
+
+ // Sender sending more than they'd declared?
+ if st.declBodyBytes != -1 && st.bodyBytes+int64(len(data)) > st.declBodyBytes {
+ st.body.CloseWithError(fmt.Errorf("sender tried to send more than declared Content-Length of %d bytes", st.declBodyBytes))
+ // RFC 7540, sec 8.1.2.6: A request or response is also malformed if the
+ // value of a content-length header field does not equal the sum of the
+ // DATA frame payload lengths that form the body.
+ return streamError(id, ErrCodeProtocol)
+ }
+ if f.Length > 0 {
+ // Check whether the client has flow control quota.
+ if st.inflow.available() < int32(f.Length) {
+ return streamError(id, ErrCodeFlowControl)
+ }
+ st.inflow.take(int32(f.Length))
+
+ if len(data) > 0 {
+ wrote, err := st.body.Write(data)
+ if err != nil {
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ if wrote != len(data) {
+ panic("internal error: bad Writer")
+ }
+ st.bodyBytes += int64(len(data))
+ }
+
+ // Return any padded flow control now, since we won't
+ // refund it later on body reads.
+ if pad := int32(f.Length) - int32(len(data)); pad > 0 {
+ sc.sendWindowUpdate32(nil, pad)
+ sc.sendWindowUpdate32(st, pad)
+ }
+ }
+ if f.StreamEnded() {
+ st.endStream()
+ }
+ return nil
+}
+
+func (sc *serverConn) processGoAway(f *GoAwayFrame) error {
+ sc.serveG.check()
+ if f.ErrCode != ErrCodeNo {
+ sc.logf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+ } else {
+ sc.vlogf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+ }
+ sc.startGracefulShutdownInternal()
+ // http://tools.ietf.org/html/rfc7540#section-6.8
+ // We should not create any new streams, which means we should disable push.
+ sc.pushEnabled = false
+ return nil
+}
+
+// isPushed reports whether the stream is server-initiated.
+func (st *stream) isPushed() bool {
+ return st.id%2 == 0
+}
+
+// endStream closes a Request.Body's pipe. It is called when a DATA
+// frame says a request body is over (or after trailers).
+func (st *stream) endStream() {
+ sc := st.sc
+ sc.serveG.check()
+
+ if st.declBodyBytes != -1 && st.declBodyBytes != st.bodyBytes {
+ st.body.CloseWithError(fmt.Errorf("request declared a Content-Length of %d but only wrote %d bytes",
+ st.declBodyBytes, st.bodyBytes))
+ } else {
+ st.body.closeWithErrorAndCode(io.EOF, st.copyTrailersToHandlerRequest)
+ st.body.CloseWithError(io.EOF)
+ }
+ st.state = stateHalfClosedRemote
+}
+
+// copyTrailersToHandlerRequest is run in the Handler's goroutine in
+// its Request.Body.Read just before it gets io.EOF.
+func (st *stream) copyTrailersToHandlerRequest() {
+ for k, vv := range st.trailer {
+ if _, ok := st.reqTrailer[k]; ok {
+ // Only copy it over it was pre-declared.
+ st.reqTrailer[k] = vv
+ }
+ }
+}
+
+// onWriteTimeout is run on its own goroutine (from time.AfterFunc)
+// when the stream's WriteTimeout has fired.
+func (st *stream) onWriteTimeout() {
+ st.sc.writeFrameFromHandler(FrameWriteRequest{write: streamError(st.id, ErrCodeInternal)})
+}
+
+func (sc *serverConn) processHeaders(f *MetaHeadersFrame) error {
+ sc.serveG.check()
+ id := f.StreamID
+ if sc.inGoAway {
+ // Ignore.
+ return nil
+ }
+ // http://tools.ietf.org/html/rfc7540#section-5.1.1
+ // Streams initiated by a client MUST use odd-numbered stream
+ // identifiers. [...] An endpoint that receives an unexpected
+ // stream identifier MUST respond with a connection error
+ // (Section 5.4.1) of type PROTOCOL_ERROR.
+ if id%2 != 1 {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ // A HEADERS frame can be used to create a new stream or
+ // send a trailer for an open one. If we already have a stream
+ // open, let it process its own HEADERS frame (trailers at this
+ // point, if it's valid).
+ if st := sc.streams[f.StreamID]; st != nil {
+ if st.resetQueued {
+ // We're sending RST_STREAM to close the stream, so don't bother
+ // processing this frame.
+ return nil
+ }
+ // RFC 7540, sec 5.1: If an endpoint receives additional frames, other than
+ // WINDOW_UPDATE, PRIORITY, or RST_STREAM, for a stream that is in
+ // this state, it MUST respond with a stream error (Section 5.4.2) of
+ // type STREAM_CLOSED.
+ if st.state == stateHalfClosedRemote {
+ return streamError(id, ErrCodeStreamClosed)
+ }
+ return st.processTrailerHeaders(f)
+ }
+
+ // [...] The identifier of a newly established stream MUST be
+ // numerically greater than all streams that the initiating
+ // endpoint has opened or reserved. [...] An endpoint that
+ // receives an unexpected stream identifier MUST respond with
+ // a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+ if id <= sc.maxClientStreamID {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ sc.maxClientStreamID = id
+
+ if sc.idleTimer != nil {
+ sc.idleTimer.Stop()
+ }
+
+ // http://tools.ietf.org/html/rfc7540#section-5.1.2
+ // [...] Endpoints MUST NOT exceed the limit set by their peer. An
+ // endpoint that receives a HEADERS frame that causes their
+ // advertised concurrent stream limit to be exceeded MUST treat
+ // this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR
+ // or REFUSED_STREAM.
+ if sc.curClientStreams+1 > sc.advMaxStreams {
+ if sc.unackedSettings == 0 {
+ // They should know better.
+ return streamError(id, ErrCodeProtocol)
+ }
+ // Assume it's a network race, where they just haven't
+ // received our last SETTINGS update. But actually
+ // this can't happen yet, because we don't yet provide
+ // a way for users to adjust server parameters at
+ // runtime.
+ return streamError(id, ErrCodeRefusedStream)
+ }
+
+ initialState := stateOpen
+ if f.StreamEnded() {
+ initialState = stateHalfClosedRemote
+ }
+ st := sc.newStream(id, 0, initialState)
+
+ if f.HasPriority() {
+ if err := checkPriority(f.StreamID, f.Priority); err != nil {
+ return err
+ }
+ sc.writeSched.AdjustStream(st.id, f.Priority)
+ }
+
+ rw, req, err := sc.newWriterAndRequest(st, f)
+ if err != nil {
+ return err
+ }
+ st.reqTrailer = req.Trailer
+ if st.reqTrailer != nil {
+ st.trailer = make(http.Header)
+ }
+ st.body = req.Body.(*requestBody).pipe // may be nil
+ st.declBodyBytes = req.ContentLength
+
+ handler := sc.handler.ServeHTTP
+ if f.Truncated {
+ // Their header list was too long. Send a 431 error.
+ handler = handleHeaderListTooLong
+ } else if err := checkValidHTTP2RequestHeaders(req.Header); err != nil {
+ handler = new400Handler(err)
+ }
+
+ // The net/http package sets the read deadline from the
+ // http.Server.ReadTimeout during the TLS handshake, but then
+ // passes the connection off to us with the deadline already
+ // set. Disarm it here after the request headers are read,
+ // similar to how the http1 server works. Here it's
+ // technically more like the http1 Server's ReadHeaderTimeout
+ // (in Go 1.8), though. That's a more sane option anyway.
+ if sc.hs.ReadTimeout != 0 {
+ sc.conn.SetReadDeadline(time.Time{})
+ }
+
+ go sc.runHandler(rw, req, handler)
+ return nil
+}
+
+func (st *stream) processTrailerHeaders(f *MetaHeadersFrame) error {
+ sc := st.sc
+ sc.serveG.check()
+ if st.gotTrailerHeader {
+ return ConnectionError(ErrCodeProtocol)
+ }
+ st.gotTrailerHeader = true
+ if !f.StreamEnded() {
+ return streamError(st.id, ErrCodeProtocol)
+ }
+
+ if len(f.PseudoFields()) > 0 {
+ return streamError(st.id, ErrCodeProtocol)
+ }
+ if st.trailer != nil {
+ for _, hf := range f.RegularFields() {
+ key := sc.canonicalHeader(hf.Name)
+ if !httpguts.ValidTrailerHeader(key) {
+ // TODO: send more details to the peer somehow. But http2 has
+ // no way to send debug data at a stream level. Discuss with
+ // HTTP folk.
+ return streamError(st.id, ErrCodeProtocol)
+ }
+ st.trailer[key] = append(st.trailer[key], hf.Value)
+ }
+ }
+ st.endStream()
+ return nil
+}
+
+func checkPriority(streamID uint32, p PriorityParam) error {
+ if streamID == p.StreamDep {
+ // Section 5.3.1: "A stream cannot depend on itself. An endpoint MUST treat
+ // this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR."
+ // Section 5.3.3 says that a stream can depend on one of its dependencies,
+ // so it's only self-dependencies that are forbidden.
+ return streamError(streamID, ErrCodeProtocol)
+ }
+ return nil
+}
+
+func (sc *serverConn) processPriority(f *PriorityFrame) error {
+ if sc.inGoAway {
+ return nil
+ }
+ if err := checkPriority(f.StreamID, f.PriorityParam); err != nil {
+ return err
+ }
+ sc.writeSched.AdjustStream(f.StreamID, f.PriorityParam)
+ return nil
+}
+
+func (sc *serverConn) newStream(id, pusherID uint32, state streamState) *stream {
+ sc.serveG.check()
+ if id == 0 {
+ panic("internal error: cannot create stream with id 0")
+ }
+
+ ctx, cancelCtx := context.WithCancel(sc.baseCtx)
+ st := &stream{
+ sc: sc,
+ id: id,
+ state: state,
+ ctx: ctx,
+ cancelCtx: cancelCtx,
+ }
+ st.cw.Init()
+ st.flow.conn = &sc.flow // link to conn-level counter
+ st.flow.add(sc.initialStreamSendWindowSize)
+ st.inflow.conn = &sc.inflow // link to conn-level counter
+ st.inflow.add(sc.srv.initialStreamRecvWindowSize())
+ if sc.hs.WriteTimeout != 0 {
+ st.writeDeadline = time.AfterFunc(sc.hs.WriteTimeout, st.onWriteTimeout)
+ }
+
+ sc.streams[id] = st
+ sc.writeSched.OpenStream(st.id, OpenStreamOptions{PusherID: pusherID})
+ if st.isPushed() {
+ sc.curPushedStreams++
+ } else {
+ sc.curClientStreams++
+ }
+ if sc.curOpenStreams() == 1 {
+ sc.setConnState(http.StateActive)
+ }
+
+ return st
+}
+
+func (sc *serverConn) newWriterAndRequest(st *stream, f *MetaHeadersFrame) (*responseWriter, *http.Request, error) {
+ sc.serveG.check()
+
+ rp := requestParam{
+ method: f.PseudoValue("method"),
+ scheme: f.PseudoValue("scheme"),
+ authority: f.PseudoValue("authority"),
+ path: f.PseudoValue("path"),
+ }
+
+ isConnect := rp.method == "CONNECT"
+ if isConnect {
+ if rp.path != "" || rp.scheme != "" || rp.authority == "" {
+ return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+ }
+ } else if rp.method == "" || rp.path == "" || (rp.scheme != "https" && rp.scheme != "http") {
+ // See 8.1.2.6 Malformed Requests and Responses:
+ //
+ // Malformed requests or responses that are detected
+ // MUST be treated as a stream error (Section 5.4.2)
+ // of type PROTOCOL_ERROR."
+ //
+ // 8.1.2.3 Request Pseudo-Header Fields
+ // "All HTTP/2 requests MUST include exactly one valid
+ // value for the :method, :scheme, and :path
+ // pseudo-header fields"
+ return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+ }
+
+ bodyOpen := !f.StreamEnded()
+ if rp.method == "HEAD" && bodyOpen {
+ // HEAD requests can't have bodies
+ return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+ }
+
+ rp.header = make(http.Header)
+ for _, hf := range f.RegularFields() {
+ rp.header.Add(sc.canonicalHeader(hf.Name), hf.Value)
+ }
+ if rp.authority == "" {
+ rp.authority = rp.header.Get("Host")
+ }
+
+ rw, req, err := sc.newWriterAndRequestNoBody(st, rp)
+ if err != nil {
+ return nil, nil, err
+ }
+ if bodyOpen {
+ if vv, ok := rp.header["Content-Length"]; ok {
+ req.ContentLength, _ = strconv.ParseInt(vv[0], 10, 64)
+ } else {
+ req.ContentLength = -1
+ }
+ req.Body.(*requestBody).pipe = &pipe{
+ b: &dataBuffer{expected: req.ContentLength},
+ }
+ }
+ return rw, req, nil
+}
+
+type requestParam struct {
+ method string
+ scheme, authority, path string
+ header http.Header
+}
+
+func (sc *serverConn) newWriterAndRequestNoBody(st *stream, rp requestParam) (*responseWriter, *http.Request, error) {
+ sc.serveG.check()
+
+ var tlsState *tls.ConnectionState // nil if not scheme https
+ if rp.scheme == "https" {
+ tlsState = sc.tlsState
+ }
+
+ needsContinue := rp.header.Get("Expect") == "100-continue"
+ if needsContinue {
+ rp.header.Del("Expect")
+ }
+ // Merge Cookie headers into one "; "-delimited value.
+ if cookies := rp.header["Cookie"]; len(cookies) > 1 {
+ rp.header.Set("Cookie", strings.Join(cookies, "; "))
+ }
+
+ // Setup Trailers
+ var trailer http.Header
+ for _, v := range rp.header["Trailer"] {
+ for _, key := range strings.Split(v, ",") {
+ key = http.CanonicalHeaderKey(strings.TrimSpace(key))
+ switch key {
+ case "Transfer-Encoding", "Trailer", "Content-Length":
+ // Bogus. (copy of http1 rules)
+ // Ignore.
+ default:
+ if trailer == nil {
+ trailer = make(http.Header)
+ }
+ trailer[key] = nil
+ }
+ }
+ }
+ delete(rp.header, "Trailer")
+
+ var url_ *url.URL
+ var requestURI string
+ if rp.method == "CONNECT" {
+ url_ = &url.URL{Host: rp.authority}
+ requestURI = rp.authority // mimic HTTP/1 server behavior
+ } else {
+ var err error
+ url_, err = url.ParseRequestURI(rp.path)
+ if err != nil {
+ return nil, nil, streamError(st.id, ErrCodeProtocol)
+ }
+ requestURI = rp.path
+ }
+
+ body := &requestBody{
+ conn: sc,
+ stream: st,
+ needsContinue: needsContinue,
+ }
+ req := &http.Request{
+ Method: rp.method,
+ URL: url_,
+ RemoteAddr: sc.remoteAddrStr,
+ Header: rp.header,
+ RequestURI: requestURI,
+ Proto: "HTTP/2.0",
+ ProtoMajor: 2,
+ ProtoMinor: 0,
+ TLS: tlsState,
+ Host: rp.authority,
+ Body: body,
+ Trailer: trailer,
+ }
+ req = req.WithContext(st.ctx)
+
+ rws := responseWriterStatePool.Get().(*responseWriterState)
+ bwSave := rws.bw
+ *rws = responseWriterState{} // zero all the fields
+ rws.conn = sc
+ rws.bw = bwSave
+ rws.bw.Reset(chunkWriter{rws})
+ rws.stream = st
+ rws.req = req
+ rws.body = body
+
+ rw := &responseWriter{rws: rws}
+ return rw, req, nil
+}
+
+// Run on its own goroutine.
+func (sc *serverConn) runHandler(rw *responseWriter, req *http.Request, handler func(http.ResponseWriter, *http.Request)) {
+ didPanic := true
+ defer func() {
+ rw.rws.stream.cancelCtx()
+ if didPanic {
+ e := recover()
+ sc.writeFrameFromHandler(FrameWriteRequest{
+ write: handlerPanicRST{rw.rws.stream.id},
+ stream: rw.rws.stream,
+ })
+ // Same as net/http:
+ if e != nil && e != http.ErrAbortHandler {
+ const size = 64 << 10
+ buf := make([]byte, size)
+ buf = buf[:runtime.Stack(buf, false)]
+ sc.logf("http2: panic serving %v: %v\n%s", sc.conn.RemoteAddr(), e, buf)
+ }
+ return
+ }
+ rw.handlerDone()
+ }()
+ handler(rw, req)
+ didPanic = false
+}
+
+func handleHeaderListTooLong(w http.ResponseWriter, r *http.Request) {
+ // 10.5.1 Limits on Header Block Size:
+ // .. "A server that receives a larger header block than it is
+ // willing to handle can send an HTTP 431 (Request Header Fields Too
+ // Large) status code"
+ const statusRequestHeaderFieldsTooLarge = 431 // only in Go 1.6+
+ w.WriteHeader(statusRequestHeaderFieldsTooLarge)
+ io.WriteString(w, "<h1>HTTP Error 431</h1><p>Request Header Field(s) Too Large</p>")
+}
+
+// called from handler goroutines.
+// h may be nil.
+func (sc *serverConn) writeHeaders(st *stream, headerData *writeResHeaders) error {
+ sc.serveG.checkNotOn() // NOT on
+ var errc chan error
+ if headerData.h != nil {
+ // If there's a header map (which we don't own), so we have to block on
+ // waiting for this frame to be written, so an http.Flush mid-handler
+ // writes out the correct value of keys, before a handler later potentially
+ // mutates it.
+ errc = errChanPool.Get().(chan error)
+ }
+ if err := sc.writeFrameFromHandler(FrameWriteRequest{
+ write: headerData,
+ stream: st,
+ done: errc,
+ }); err != nil {
+ return err
+ }
+ if errc != nil {
+ select {
+ case err := <-errc:
+ errChanPool.Put(errc)
+ return err
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-st.cw:
+ return errStreamClosed
+ }
+ }
+ return nil
+}
+
+// called from handler goroutines.
+func (sc *serverConn) write100ContinueHeaders(st *stream) {
+ sc.writeFrameFromHandler(FrameWriteRequest{
+ write: write100ContinueHeadersFrame{st.id},
+ stream: st,
+ })
+}
+
+// A bodyReadMsg tells the server loop that the http.Handler read n
+// bytes of the DATA from the client on the given stream.
+type bodyReadMsg struct {
+ st *stream
+ n int
+}
+
+// called from handler goroutines.
+// Notes that the handler for the given stream ID read n bytes of its body
+// and schedules flow control tokens to be sent.
+func (sc *serverConn) noteBodyReadFromHandler(st *stream, n int, err error) {
+ sc.serveG.checkNotOn() // NOT on
+ if n > 0 {
+ select {
+ case sc.bodyReadCh <- bodyReadMsg{st, n}:
+ case <-sc.doneServing:
+ }
+ }
+}
+
+func (sc *serverConn) noteBodyRead(st *stream, n int) {
+ sc.serveG.check()
+ sc.sendWindowUpdate(nil, n) // conn-level
+ if st.state != stateHalfClosedRemote && st.state != stateClosed {
+ // Don't send this WINDOW_UPDATE if the stream is closed
+ // remotely.
+ sc.sendWindowUpdate(st, n)
+ }
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate(st *stream, n int) {
+ sc.serveG.check()
+ // "The legal range for the increment to the flow control
+ // window is 1 to 2^31-1 (2,147,483,647) octets."
+ // A Go Read call on 64-bit machines could in theory read
+ // a larger Read than this. Very unlikely, but we handle it here
+ // rather than elsewhere for now.
+ const maxUint31 = 1<<31 - 1
+ for n >= maxUint31 {
+ sc.sendWindowUpdate32(st, maxUint31)
+ n -= maxUint31
+ }
+ sc.sendWindowUpdate32(st, int32(n))
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate32(st *stream, n int32) {
+ sc.serveG.check()
+ if n == 0 {
+ return
+ }
+ if n < 0 {
+ panic("negative update")
+ }
+ var streamID uint32
+ if st != nil {
+ streamID = st.id
+ }
+ sc.writeFrame(FrameWriteRequest{
+ write: writeWindowUpdate{streamID: streamID, n: uint32(n)},
+ stream: st,
+ })
+ var ok bool
+ if st == nil {
+ ok = sc.inflow.add(n)
+ } else {
+ ok = st.inflow.add(n)
+ }
+ if !ok {
+ panic("internal error; sent too many window updates without decrements?")
+ }
+}
+
+// requestBody is the Handler's Request.Body type.
+// Read and Close may be called concurrently.
+type requestBody struct {
+ stream *stream
+ conn *serverConn
+ closed bool // for use by Close only
+ sawEOF bool // for use by Read only
+ pipe *pipe // non-nil if we have a HTTP entity message body
+ needsContinue bool // need to send a 100-continue
+}
+
+func (b *requestBody) Close() error {
+ if b.pipe != nil && !b.closed {
+ b.pipe.BreakWithError(errClosedBody)
+ }
+ b.closed = true
+ return nil
+}
+
+func (b *requestBody) Read(p []byte) (n int, err error) {
+ if b.needsContinue {
+ b.needsContinue = false
+ b.conn.write100ContinueHeaders(b.stream)
+ }
+ if b.pipe == nil || b.sawEOF {
+ return 0, io.EOF
+ }
+ n, err = b.pipe.Read(p)
+ if err == io.EOF {
+ b.sawEOF = true
+ }
+ if b.conn == nil && inTests {
+ return
+ }
+ b.conn.noteBodyReadFromHandler(b.stream, n, err)
+ return
+}
+
+// responseWriter is the http.ResponseWriter implementation. It's
+// intentionally small (1 pointer wide) to minimize garbage. The
+// responseWriterState pointer inside is zeroed at the end of a
+// request (in handlerDone) and calls on the responseWriter thereafter
+// simply crash (caller's mistake), but the much larger responseWriterState
+// and buffers are reused between multiple requests.
+type responseWriter struct {
+ rws *responseWriterState
+}
+
+// Optional http.ResponseWriter interfaces implemented.
+var (
+ _ http.CloseNotifier = (*responseWriter)(nil)
+ _ http.Flusher = (*responseWriter)(nil)
+ _ stringWriter = (*responseWriter)(nil)
+)
+
+type responseWriterState struct {
+ // immutable within a request:
+ stream *stream
+ req *http.Request
+ body *requestBody // to close at end of request, if DATA frames didn't
+ conn *serverConn
+
+ // TODO: adjust buffer writing sizes based on server config, frame size updates from peer, etc
+ bw *bufio.Writer // writing to a chunkWriter{this *responseWriterState}
+
+ // mutated by http.Handler goroutine:
+ handlerHeader http.Header // nil until called
+ snapHeader http.Header // snapshot of handlerHeader at WriteHeader time
+ trailers []string // set in writeChunk
+ status int // status code passed to WriteHeader
+ wroteHeader bool // WriteHeader called (explicitly or implicitly). Not necessarily sent to user yet.
+ sentHeader bool // have we sent the header frame?
+ handlerDone bool // handler has finished
+ dirty bool // a Write failed; don't reuse this responseWriterState
+
+ sentContentLen int64 // non-zero if handler set a Content-Length header
+ wroteBytes int64
+
+ closeNotifierMu sync.Mutex // guards closeNotifierCh
+ closeNotifierCh chan bool // nil until first used
+}
+
+type chunkWriter struct{ rws *responseWriterState }
+
+func (cw chunkWriter) Write(p []byte) (n int, err error) { return cw.rws.writeChunk(p) }
+
+func (rws *responseWriterState) hasTrailers() bool { return len(rws.trailers) != 0 }
+
+// declareTrailer is called for each Trailer header when the
+// response header is written. It notes that a header will need to be
+// written in the trailers at the end of the response.
+func (rws *responseWriterState) declareTrailer(k string) {
+ k = http.CanonicalHeaderKey(k)
+ if !httpguts.ValidTrailerHeader(k) {
+ // Forbidden by RFC 7230, section 4.1.2.
+ rws.conn.logf("ignoring invalid trailer %q", k)
+ return
+ }
+ if !strSliceContains(rws.trailers, k) {
+ rws.trailers = append(rws.trailers, k)
+ }
+}
+
+// writeChunk writes chunks from the bufio.Writer. But because
+// bufio.Writer may bypass its chunking, sometimes p may be
+// arbitrarily large.
+//
+// writeChunk is also responsible (on the first chunk) for sending the
+// HEADER response.
+func (rws *responseWriterState) writeChunk(p []byte) (n int, err error) {
+ if !rws.wroteHeader {
+ rws.writeHeader(200)
+ }
+
+ isHeadResp := rws.req.Method == "HEAD"
+ if !rws.sentHeader {
+ rws.sentHeader = true
+ var ctype, clen string
+ if clen = rws.snapHeader.Get("Content-Length"); clen != "" {
+ rws.snapHeader.Del("Content-Length")
+ clen64, err := strconv.ParseInt(clen, 10, 64)
+ if err == nil && clen64 >= 0 {
+ rws.sentContentLen = clen64
+ } else {
+ clen = ""
+ }
+ }
+ if clen == "" && rws.handlerDone && bodyAllowedForStatus(rws.status) && (len(p) > 0 || !isHeadResp) {
+ clen = strconv.Itoa(len(p))
+ }
+ _, hasContentType := rws.snapHeader["Content-Type"]
+ if !hasContentType && bodyAllowedForStatus(rws.status) && len(p) > 0 {
+ ctype = http.DetectContentType(p)
+ }
+ var date string
+ if _, ok := rws.snapHeader["Date"]; !ok {
+ // TODO(bradfitz): be faster here, like net/http? measure.
+ date = time.Now().UTC().Format(http.TimeFormat)
+ }
+
+ for _, v := range rws.snapHeader["Trailer"] {
+ foreachHeaderElement(v, rws.declareTrailer)
+ }
+
+ // "Connection" headers aren't allowed in HTTP/2 (RFC 7540, 8.1.2.2),
+ // but respect "Connection" == "close" to mean sending a GOAWAY and tearing
+ // down the TCP connection when idle, like we do for HTTP/1.
+ // TODO: remove more Connection-specific header fields here, in addition
+ // to "Connection".
+ if _, ok := rws.snapHeader["Connection"]; ok {
+ v := rws.snapHeader.Get("Connection")
+ delete(rws.snapHeader, "Connection")
+ if v == "close" {
+ rws.conn.startGracefulShutdown()
+ }
+ }
+
+ endStream := (rws.handlerDone && !rws.hasTrailers() && len(p) == 0) || isHeadResp
+ err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+ streamID: rws.stream.id,
+ httpResCode: rws.status,
+ h: rws.snapHeader,
+ endStream: endStream,
+ contentType: ctype,
+ contentLength: clen,
+ date: date,
+ })
+ if err != nil {
+ rws.dirty = true
+ return 0, err
+ }
+ if endStream {
+ return 0, nil
+ }
+ }
+ if isHeadResp {
+ return len(p), nil
+ }
+ if len(p) == 0 && !rws.handlerDone {
+ return 0, nil
+ }
+
+ if rws.handlerDone {
+ rws.promoteUndeclaredTrailers()
+ }
+
+ endStream := rws.handlerDone && !rws.hasTrailers()
+ if len(p) > 0 || endStream {
+ // only send a 0 byte DATA frame if we're ending the stream.
+ if err := rws.conn.writeDataFromHandler(rws.stream, p, endStream); err != nil {
+ rws.dirty = true
+ return 0, err
+ }
+ }
+
+ if rws.handlerDone && rws.hasTrailers() {
+ err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+ streamID: rws.stream.id,
+ h: rws.handlerHeader,
+ trailers: rws.trailers,
+ endStream: true,
+ })
+ if err != nil {
+ rws.dirty = true
+ }
+ return len(p), err
+ }
+ return len(p), nil
+}
+
+// TrailerPrefix is a magic prefix for ResponseWriter.Header map keys
+// that, if present, signals that the map entry is actually for
+// the response trailers, and not the response headers. The prefix
+// is stripped after the ServeHTTP call finishes and the values are
+// sent in the trailers.
+//
+// This mechanism is intended only for trailers that are not known
+// prior to the headers being written. If the set of trailers is fixed
+// or known before the header is written, the normal Go trailers mechanism
+// is preferred:
+// https://golang.org/pkg/net/http/#ResponseWriter
+// https://golang.org/pkg/net/http/#example_ResponseWriter_trailers
+const TrailerPrefix = "Trailer:"
+
+// promoteUndeclaredTrailers permits http.Handlers to set trailers
+// after the header has already been flushed. Because the Go
+// ResponseWriter interface has no way to set Trailers (only the
+// Header), and because we didn't want to expand the ResponseWriter
+// interface, and because nobody used trailers, and because RFC 7230
+// says you SHOULD (but not must) predeclare any trailers in the
+// header, the official ResponseWriter rules said trailers in Go must
+// be predeclared, and then we reuse the same ResponseWriter.Header()
+// map to mean both Headers and Trailers. When it's time to write the
+// Trailers, we pick out the fields of Headers that were declared as
+// trailers. That worked for a while, until we found the first major
+// user of Trailers in the wild: gRPC (using them only over http2),
+// and gRPC libraries permit setting trailers mid-stream without
+// predeclarnig them. So: change of plans. We still permit the old
+// way, but we also permit this hack: if a Header() key begins with
+// "Trailer:", the suffix of that key is a Trailer. Because ':' is an
+// invalid token byte anyway, there is no ambiguity. (And it's already
+// filtered out) It's mildly hacky, but not terrible.
+//
+// This method runs after the Handler is done and promotes any Header
+// fields to be trailers.
+func (rws *responseWriterState) promoteUndeclaredTrailers() {
+ for k, vv := range rws.handlerHeader {
+ if !strings.HasPrefix(k, TrailerPrefix) {
+ continue
+ }
+ trailerKey := strings.TrimPrefix(k, TrailerPrefix)
+ rws.declareTrailer(trailerKey)
+ rws.handlerHeader[http.CanonicalHeaderKey(trailerKey)] = vv
+ }
+
+ if len(rws.trailers) > 1 {
+ sorter := sorterPool.Get().(*sorter)
+ sorter.SortStrings(rws.trailers)
+ sorterPool.Put(sorter)
+ }
+}
+
+func (w *responseWriter) Flush() {
+ rws := w.rws
+ if rws == nil {
+ panic("Header called after Handler finished")
+ }
+ if rws.bw.Buffered() > 0 {
+ if err := rws.bw.Flush(); err != nil {
+ // Ignore the error. The frame writer already knows.
+ return
+ }
+ } else {
+ // The bufio.Writer won't call chunkWriter.Write
+ // (writeChunk with zero bytes, so we have to do it
+ // ourselves to force the HTTP response header and/or
+ // final DATA frame (with END_STREAM) to be sent.
+ rws.writeChunk(nil)
+ }
+}
+
+func (w *responseWriter) CloseNotify() <-chan bool {
+ rws := w.rws
+ if rws == nil {
+ panic("CloseNotify called after Handler finished")
+ }
+ rws.closeNotifierMu.Lock()
+ ch := rws.closeNotifierCh
+ if ch == nil {
+ ch = make(chan bool, 1)
+ rws.closeNotifierCh = ch
+ cw := rws.stream.cw
+ go func() {
+ cw.Wait() // wait for close
+ ch <- true
+ }()
+ }
+ rws.closeNotifierMu.Unlock()
+ return ch
+}
+
+func (w *responseWriter) Header() http.Header {
+ rws := w.rws
+ if rws == nil {
+ panic("Header called after Handler finished")
+ }
+ if rws.handlerHeader == nil {
+ rws.handlerHeader = make(http.Header)
+ }
+ return rws.handlerHeader
+}
+
+// checkWriteHeaderCode is a copy of net/http's checkWriteHeaderCode.
+func checkWriteHeaderCode(code int) {
+ // Issue 22880: require valid WriteHeader status codes.
+ // For now we only enforce that it's three digits.
+ // In the future we might block things over 599 (600 and above aren't defined
+ // at http://httpwg.org/specs/rfc7231.html#status.codes)
+ // and we might block under 200 (once we have more mature 1xx support).
+ // But for now any three digits.
+ //
+ // We used to send "HTTP/1.1 000 0" on the wire in responses but there's
+ // no equivalent bogus thing we can realistically send in HTTP/2,
+ // so we'll consistently panic instead and help people find their bugs
+ // early. (We can't return an error from WriteHeader even if we wanted to.)
+ if code < 100 || code > 999 {
+ panic(fmt.Sprintf("invalid WriteHeader code %v", code))
+ }
+}
+
+func (w *responseWriter) WriteHeader(code int) {
+ rws := w.rws
+ if rws == nil {
+ panic("WriteHeader called after Handler finished")
+ }
+ rws.writeHeader(code)
+}
+
+func (rws *responseWriterState) writeHeader(code int) {
+ if !rws.wroteHeader {
+ checkWriteHeaderCode(code)
+ rws.wroteHeader = true
+ rws.status = code
+ if len(rws.handlerHeader) > 0 {
+ rws.snapHeader = cloneHeader(rws.handlerHeader)
+ }
+ }
+}
+
+func cloneHeader(h http.Header) http.Header {
+ h2 := make(http.Header, len(h))
+ for k, vv := range h {
+ vv2 := make([]string, len(vv))
+ copy(vv2, vv)
+ h2[k] = vv2
+ }
+ return h2
+}
+
+// The Life Of A Write is like this:
+//
+// * Handler calls w.Write or w.WriteString ->
+// * -> rws.bw (*bufio.Writer) ->
+// * (Handler might call Flush)
+// * -> chunkWriter{rws}
+// * -> responseWriterState.writeChunk(p []byte)
+// * -> responseWriterState.writeChunk (most of the magic; see comment there)
+func (w *responseWriter) Write(p []byte) (n int, err error) {
+ return w.write(len(p), p, "")
+}
+
+func (w *responseWriter) WriteString(s string) (n int, err error) {
+ return w.write(len(s), nil, s)
+}
+
+// either dataB or dataS is non-zero.
+func (w *responseWriter) write(lenData int, dataB []byte, dataS string) (n int, err error) {
+ rws := w.rws
+ if rws == nil {
+ panic("Write called after Handler finished")
+ }
+ if !rws.wroteHeader {
+ w.WriteHeader(200)
+ }
+ if !bodyAllowedForStatus(rws.status) {
+ return 0, http.ErrBodyNotAllowed
+ }
+ rws.wroteBytes += int64(len(dataB)) + int64(len(dataS)) // only one can be set
+ if rws.sentContentLen != 0 && rws.wroteBytes > rws.sentContentLen {
+ // TODO: send a RST_STREAM
+ return 0, errors.New("http2: handler wrote more than declared Content-Length")
+ }
+
+ if dataB != nil {
+ return rws.bw.Write(dataB)
+ } else {
+ return rws.bw.WriteString(dataS)
+ }
+}
+
+func (w *responseWriter) handlerDone() {
+ rws := w.rws
+ dirty := rws.dirty
+ rws.handlerDone = true
+ w.Flush()
+ w.rws = nil
+ if !dirty {
+ // Only recycle the pool if all prior Write calls to
+ // the serverConn goroutine completed successfully. If
+ // they returned earlier due to resets from the peer
+ // there might still be write goroutines outstanding
+ // from the serverConn referencing the rws memory. See
+ // issue 20704.
+ responseWriterStatePool.Put(rws)
+ }
+}
+
+// Push errors.
+var (
+ ErrRecursivePush = errors.New("http2: recursive push not allowed")
+ ErrPushLimitReached = errors.New("http2: push would exceed peer's SETTINGS_MAX_CONCURRENT_STREAMS")
+)
+
+var _ http.Pusher = (*responseWriter)(nil)
+
+func (w *responseWriter) Push(target string, opts *http.PushOptions) error {
+ st := w.rws.stream
+ sc := st.sc
+ sc.serveG.checkNotOn()
+
+ // No recursive pushes: "PUSH_PROMISE frames MUST only be sent on a peer-initiated stream."
+ // http://tools.ietf.org/html/rfc7540#section-6.6
+ if st.isPushed() {
+ return ErrRecursivePush
+ }
+
+ if opts == nil {
+ opts = new(http.PushOptions)
+ }
+
+ // Default options.
+ if opts.Method == "" {
+ opts.Method = "GET"
+ }
+ if opts.Header == nil {
+ opts.Header = http.Header{}
+ }
+ wantScheme := "http"
+ if w.rws.req.TLS != nil {
+ wantScheme = "https"
+ }
+
+ // Validate the request.
+ u, err := url.Parse(target)
+ if err != nil {
+ return err
+ }
+ if u.Scheme == "" {
+ if !strings.HasPrefix(target, "/") {
+ return fmt.Errorf("target must be an absolute URL or an absolute path: %q", target)
+ }
+ u.Scheme = wantScheme
+ u.Host = w.rws.req.Host
+ } else {
+ if u.Scheme != wantScheme {
+ return fmt.Errorf("cannot push URL with scheme %q from request with scheme %q", u.Scheme, wantScheme)
+ }
+ if u.Host == "" {
+ return errors.New("URL must have a host")
+ }
+ }
+ for k := range opts.Header {
+ if strings.HasPrefix(k, ":") {
+ return fmt.Errorf("promised request headers cannot include pseudo header %q", k)
+ }
+ // These headers are meaningful only if the request has a body,
+ // but PUSH_PROMISE requests cannot have a body.
+ // http://tools.ietf.org/html/rfc7540#section-8.2
+ // Also disallow Host, since the promised URL must be absolute.
+ switch strings.ToLower(k) {
+ case "content-length", "content-encoding", "trailer", "te", "expect", "host":
+ return fmt.Errorf("promised request headers cannot include %q", k)
+ }
+ }
+ if err := checkValidHTTP2RequestHeaders(opts.Header); err != nil {
+ return err
+ }
+
+ // The RFC effectively limits promised requests to GET and HEAD:
+ // "Promised requests MUST be cacheable [GET, HEAD, or POST], and MUST be safe [GET or HEAD]"
+ // http://tools.ietf.org/html/rfc7540#section-8.2
+ if opts.Method != "GET" && opts.Method != "HEAD" {
+ return fmt.Errorf("method %q must be GET or HEAD", opts.Method)
+ }
+
+ msg := &startPushRequest{
+ parent: st,
+ method: opts.Method,
+ url: u,
+ header: cloneHeader(opts.Header),
+ done: errChanPool.Get().(chan error),
+ }
+
+ select {
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-st.cw:
+ return errStreamClosed
+ case sc.serveMsgCh <- msg:
+ }
+
+ select {
+ case <-sc.doneServing:
+ return errClientDisconnected
+ case <-st.cw:
+ return errStreamClosed
+ case err := <-msg.done:
+ errChanPool.Put(msg.done)
+ return err
+ }
+}
+
+type startPushRequest struct {
+ parent *stream
+ method string
+ url *url.URL
+ header http.Header
+ done chan error
+}
+
+func (sc *serverConn) startPush(msg *startPushRequest) {
+ sc.serveG.check()
+
+ // http://tools.ietf.org/html/rfc7540#section-6.6.
+ // PUSH_PROMISE frames MUST only be sent on a peer-initiated stream that
+ // is in either the "open" or "half-closed (remote)" state.
+ if msg.parent.state != stateOpen && msg.parent.state != stateHalfClosedRemote {
+ // responseWriter.Push checks that the stream is peer-initiaed.
+ msg.done <- errStreamClosed
+ return
+ }
+
+ // http://tools.ietf.org/html/rfc7540#section-6.6.
+ if !sc.pushEnabled {
+ msg.done <- http.ErrNotSupported
+ return
+ }
+
+ // PUSH_PROMISE frames must be sent in increasing order by stream ID, so
+ // we allocate an ID for the promised stream lazily, when the PUSH_PROMISE
+ // is written. Once the ID is allocated, we start the request handler.
+ allocatePromisedID := func() (uint32, error) {
+ sc.serveG.check()
+
+ // Check this again, just in case. Technically, we might have received
+ // an updated SETTINGS by the time we got around to writing this frame.
+ if !sc.pushEnabled {
+ return 0, http.ErrNotSupported
+ }
+ // http://tools.ietf.org/html/rfc7540#section-6.5.2.
+ if sc.curPushedStreams+1 > sc.clientMaxStreams {
+ return 0, ErrPushLimitReached
+ }
+
+ // http://tools.ietf.org/html/rfc7540#section-5.1.1.
+ // Streams initiated by the server MUST use even-numbered identifiers.
+ // A server that is unable to establish a new stream identifier can send a GOAWAY
+ // frame so that the client is forced to open a new connection for new streams.
+ if sc.maxPushPromiseID+2 >= 1<<31 {
+ sc.startGracefulShutdownInternal()
+ return 0, ErrPushLimitReached
+ }
+ sc.maxPushPromiseID += 2
+ promisedID := sc.maxPushPromiseID
+
+ // http://tools.ietf.org/html/rfc7540#section-8.2.
+ // Strictly speaking, the new stream should start in "reserved (local)", then
+ // transition to "half closed (remote)" after sending the initial HEADERS, but
+ // we start in "half closed (remote)" for simplicity.
+ // See further comments at the definition of stateHalfClosedRemote.
+ promised := sc.newStream(promisedID, msg.parent.id, stateHalfClosedRemote)
+ rw, req, err := sc.newWriterAndRequestNoBody(promised, requestParam{
+ method: msg.method,
+ scheme: msg.url.Scheme,
+ authority: msg.url.Host,
+ path: msg.url.RequestURI(),
+ header: cloneHeader(msg.header), // clone since handler runs concurrently with writing the PUSH_PROMISE
+ })
+ if err != nil {
+ // Should not happen, since we've already validated msg.url.
+ panic(fmt.Sprintf("newWriterAndRequestNoBody(%+v): %v", msg.url, err))
+ }
+
+ go sc.runHandler(rw, req, sc.handler.ServeHTTP)
+ return promisedID, nil
+ }
+
+ sc.writeFrame(FrameWriteRequest{
+ write: &writePushPromise{
+ streamID: msg.parent.id,
+ method: msg.method,
+ url: msg.url,
+ h: msg.header,
+ allocatePromisedID: allocatePromisedID,
+ },
+ stream: msg.parent,
+ done: msg.done,
+ })
+}
+
+// foreachHeaderElement splits v according to the "#rule" construction
+// in RFC 7230 section 7 and calls fn for each non-empty element.
+func foreachHeaderElement(v string, fn func(string)) {
+ v = textproto.TrimString(v)
+ if v == "" {
+ return
+ }
+ if !strings.Contains(v, ",") {
+ fn(v)
+ return
+ }
+ for _, f := range strings.Split(v, ",") {
+ if f = textproto.TrimString(f); f != "" {
+ fn(f)
+ }
+ }
+}
+
+// From http://httpwg.org/specs/rfc7540.html#rfc.section.8.1.2.2
+var connHeaders = []string{
+ "Connection",
+ "Keep-Alive",
+ "Proxy-Connection",
+ "Transfer-Encoding",
+ "Upgrade",
+}
+
+// checkValidHTTP2RequestHeaders checks whether h is a valid HTTP/2 request,
+// per RFC 7540 Section 8.1.2.2.
+// The returned error is reported to users.
+func checkValidHTTP2RequestHeaders(h http.Header) error {
+ for _, k := range connHeaders {
+ if _, ok := h[k]; ok {
+ return fmt.Errorf("request header %q is not valid in HTTP/2", k)
+ }
+ }
+ te := h["Te"]
+ if len(te) > 0 && (len(te) > 1 || (te[0] != "trailers" && te[0] != "")) {
+ return errors.New(`request header "TE" may only be "trailers" in HTTP/2`)
+ }
+ return nil
+}
+
+func new400Handler(err error) http.HandlerFunc {
+ return func(w http.ResponseWriter, r *http.Request) {
+ http.Error(w, err.Error(), http.StatusBadRequest)
+ }
+}
+
+// h1ServerKeepAlivesDisabled reports whether hs has its keep-alives
+// disabled. See comments on h1ServerShutdownChan above for why
+// the code is written this way.
+func h1ServerKeepAlivesDisabled(hs *http.Server) bool {
+ var x interface{} = hs
+ type I interface {
+ doKeepAlives() bool
+ }
+ if hs, ok := x.(I); ok {
+ return !hs.doKeepAlives()
+ }
+ return false
+}
diff --git a/vendor/golang.org/x/net/http2/transport.go b/vendor/golang.org/x/net/http2/transport.go
new file mode 100644
index 0000000..f272e8f
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/transport.go
@@ -0,0 +1,2603 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Transport code.
+
+package http2
+
+import (
+ "bufio"
+ "bytes"
+ "compress/gzip"
+ "context"
+ "crypto/rand"
+ "crypto/tls"
+ "errors"
+ "fmt"
+ "io"
+ "io/ioutil"
+ "log"
+ "math"
+ mathrand "math/rand"
+ "net"
+ "net/http"
+ "net/http/httptrace"
+ "net/textproto"
+ "sort"
+ "strconv"
+ "strings"
+ "sync"
+ "time"
+
+ "golang.org/x/net/http/httpguts"
+ "golang.org/x/net/http2/hpack"
+ "golang.org/x/net/idna"
+)
+
+const (
+ // transportDefaultConnFlow is how many connection-level flow control
+ // tokens we give the server at start-up, past the default 64k.
+ transportDefaultConnFlow = 1 << 30
+
+ // transportDefaultStreamFlow is how many stream-level flow
+ // control tokens we announce to the peer, and how many bytes
+ // we buffer per stream.
+ transportDefaultStreamFlow = 4 << 20
+
+ // transportDefaultStreamMinRefresh is the minimum number of bytes we'll send
+ // a stream-level WINDOW_UPDATE for at a time.
+ transportDefaultStreamMinRefresh = 4 << 10
+
+ defaultUserAgent = "Go-http-client/2.0"
+)
+
+// Transport is an HTTP/2 Transport.
+//
+// A Transport internally caches connections to servers. It is safe
+// for concurrent use by multiple goroutines.
+type Transport struct {
+ // DialTLS specifies an optional dial function for creating
+ // TLS connections for requests.
+ //
+ // If DialTLS is nil, tls.Dial is used.
+ //
+ // If the returned net.Conn has a ConnectionState method like tls.Conn,
+ // it will be used to set http.Response.TLS.
+ DialTLS func(network, addr string, cfg *tls.Config) (net.Conn, error)
+
+ // TLSClientConfig specifies the TLS configuration to use with
+ // tls.Client. If nil, the default configuration is used.
+ TLSClientConfig *tls.Config
+
+ // ConnPool optionally specifies an alternate connection pool to use.
+ // If nil, the default is used.
+ ConnPool ClientConnPool
+
+ // DisableCompression, if true, prevents the Transport from
+ // requesting compression with an "Accept-Encoding: gzip"
+ // request header when the Request contains no existing
+ // Accept-Encoding value. If the Transport requests gzip on
+ // its own and gets a gzipped response, it's transparently
+ // decoded in the Response.Body. However, if the user
+ // explicitly requested gzip it is not automatically
+ // uncompressed.
+ DisableCompression bool
+
+ // AllowHTTP, if true, permits HTTP/2 requests using the insecure,
+ // plain-text "http" scheme. Note that this does not enable h2c support.
+ AllowHTTP bool
+
+ // MaxHeaderListSize is the http2 SETTINGS_MAX_HEADER_LIST_SIZE to
+ // send in the initial settings frame. It is how many bytes
+ // of response headers are allowed. Unlike the http2 spec, zero here
+ // means to use a default limit (currently 10MB). If you actually
+ // want to advertise an ulimited value to the peer, Transport
+ // interprets the highest possible value here (0xffffffff or 1<<32-1)
+ // to mean no limit.
+ MaxHeaderListSize uint32
+
+ // StrictMaxConcurrentStreams controls whether the server's
+ // SETTINGS_MAX_CONCURRENT_STREAMS should be respected
+ // globally. If false, new TCP connections are created to the
+ // server as needed to keep each under the per-connection
+ // SETTINGS_MAX_CONCURRENT_STREAMS limit. If true, the
+ // server's SETTINGS_MAX_CONCURRENT_STREAMS is interpreted as
+ // a global limit and callers of RoundTrip block when needed,
+ // waiting for their turn.
+ StrictMaxConcurrentStreams bool
+
+ // t1, if non-nil, is the standard library Transport using
+ // this transport. Its settings are used (but not its
+ // RoundTrip method, etc).
+ t1 *http.Transport
+
+ connPoolOnce sync.Once
+ connPoolOrDef ClientConnPool // non-nil version of ConnPool
+}
+
+func (t *Transport) maxHeaderListSize() uint32 {
+ if t.MaxHeaderListSize == 0 {
+ return 10 << 20
+ }
+ if t.MaxHeaderListSize == 0xffffffff {
+ return 0
+ }
+ return t.MaxHeaderListSize
+}
+
+func (t *Transport) disableCompression() bool {
+ return t.DisableCompression || (t.t1 != nil && t.t1.DisableCompression)
+}
+
+// ConfigureTransport configures a net/http HTTP/1 Transport to use HTTP/2.
+// It returns an error if t1 has already been HTTP/2-enabled.
+func ConfigureTransport(t1 *http.Transport) error {
+ _, err := configureTransport(t1)
+ return err
+}
+
+func configureTransport(t1 *http.Transport) (*Transport, error) {
+ connPool := new(clientConnPool)
+ t2 := &Transport{
+ ConnPool: noDialClientConnPool{connPool},
+ t1: t1,
+ }
+ connPool.t = t2
+ if err := registerHTTPSProtocol(t1, noDialH2RoundTripper{t2}); err != nil {
+ return nil, err
+ }
+ if t1.TLSClientConfig == nil {
+ t1.TLSClientConfig = new(tls.Config)
+ }
+ if !strSliceContains(t1.TLSClientConfig.NextProtos, "h2") {
+ t1.TLSClientConfig.NextProtos = append([]string{"h2"}, t1.TLSClientConfig.NextProtos...)
+ }
+ if !strSliceContains(t1.TLSClientConfig.NextProtos, "http/1.1") {
+ t1.TLSClientConfig.NextProtos = append(t1.TLSClientConfig.NextProtos, "http/1.1")
+ }
+ upgradeFn := func(authority string, c *tls.Conn) http.RoundTripper {
+ addr := authorityAddr("https", authority)
+ if used, err := connPool.addConnIfNeeded(addr, t2, c); err != nil {
+ go c.Close()
+ return erringRoundTripper{err}
+ } else if !used {
+ // Turns out we don't need this c.
+ // For example, two goroutines made requests to the same host
+ // at the same time, both kicking off TCP dials. (since protocol
+ // was unknown)
+ go c.Close()
+ }
+ return t2
+ }
+ if m := t1.TLSNextProto; len(m) == 0 {
+ t1.TLSNextProto = map[string]func(string, *tls.Conn) http.RoundTripper{
+ "h2": upgradeFn,
+ }
+ } else {
+ m["h2"] = upgradeFn
+ }
+ return t2, nil
+}
+
+func (t *Transport) connPool() ClientConnPool {
+ t.connPoolOnce.Do(t.initConnPool)
+ return t.connPoolOrDef
+}
+
+func (t *Transport) initConnPool() {
+ if t.ConnPool != nil {
+ t.connPoolOrDef = t.ConnPool
+ } else {
+ t.connPoolOrDef = &clientConnPool{t: t}
+ }
+}
+
+// ClientConn is the state of a single HTTP/2 client connection to an
+// HTTP/2 server.
+type ClientConn struct {
+ t *Transport
+ tconn net.Conn // usually *tls.Conn, except specialized impls
+ tlsState *tls.ConnectionState // nil only for specialized impls
+ singleUse bool // whether being used for a single http.Request
+
+ // readLoop goroutine fields:
+ readerDone chan struct{} // closed on error
+ readerErr error // set before readerDone is closed
+
+ idleTimeout time.Duration // or 0 for never
+ idleTimer *time.Timer
+
+ mu sync.Mutex // guards following
+ cond *sync.Cond // hold mu; broadcast on flow/closed changes
+ flow flow // our conn-level flow control quota (cs.flow is per stream)
+ inflow flow // peer's conn-level flow control
+ closing bool
+ closed bool
+ wantSettingsAck bool // we sent a SETTINGS frame and haven't heard back
+ goAway *GoAwayFrame // if non-nil, the GoAwayFrame we received
+ goAwayDebug string // goAway frame's debug data, retained as a string
+ streams map[uint32]*clientStream // client-initiated
+ nextStreamID uint32
+ pendingRequests int // requests blocked and waiting to be sent because len(streams) == maxConcurrentStreams
+ pings map[[8]byte]chan struct{} // in flight ping data to notification channel
+ bw *bufio.Writer
+ br *bufio.Reader
+ fr *Framer
+ lastActive time.Time
+ // Settings from peer: (also guarded by mu)
+ maxFrameSize uint32
+ maxConcurrentStreams uint32
+ peerMaxHeaderListSize uint64
+ initialWindowSize uint32
+
+ hbuf bytes.Buffer // HPACK encoder writes into this
+ henc *hpack.Encoder
+ freeBuf [][]byte
+
+ wmu sync.Mutex // held while writing; acquire AFTER mu if holding both
+ werr error // first write error that has occurred
+}
+
+// clientStream is the state for a single HTTP/2 stream. One of these
+// is created for each Transport.RoundTrip call.
+type clientStream struct {
+ cc *ClientConn
+ req *http.Request
+ trace *httptrace.ClientTrace // or nil
+ ID uint32
+ resc chan resAndError
+ bufPipe pipe // buffered pipe with the flow-controlled response payload
+ startedWrite bool // started request body write; guarded by cc.mu
+ requestedGzip bool
+ on100 func() // optional code to run if get a 100 continue response
+
+ flow flow // guarded by cc.mu
+ inflow flow // guarded by cc.mu
+ bytesRemain int64 // -1 means unknown; owned by transportResponseBody.Read
+ readErr error // sticky read error; owned by transportResponseBody.Read
+ stopReqBody error // if non-nil, stop writing req body; guarded by cc.mu
+ didReset bool // whether we sent a RST_STREAM to the server; guarded by cc.mu
+
+ peerReset chan struct{} // closed on peer reset
+ resetErr error // populated before peerReset is closed
+
+ done chan struct{} // closed when stream remove from cc.streams map; close calls guarded by cc.mu
+
+ // owned by clientConnReadLoop:
+ firstByte bool // got the first response byte
+ pastHeaders bool // got first MetaHeadersFrame (actual headers)
+ pastTrailers bool // got optional second MetaHeadersFrame (trailers)
+ num1xx uint8 // number of 1xx responses seen
+
+ trailer http.Header // accumulated trailers
+ resTrailer *http.Header // client's Response.Trailer
+}
+
+// awaitRequestCancel waits for the user to cancel a request or for the done
+// channel to be signaled. A non-nil error is returned only if the request was
+// canceled.
+func awaitRequestCancel(req *http.Request, done <-chan struct{}) error {
+ ctx := req.Context()
+ if req.Cancel == nil && ctx.Done() == nil {
+ return nil
+ }
+ select {
+ case <-req.Cancel:
+ return errRequestCanceled
+ case <-ctx.Done():
+ return ctx.Err()
+ case <-done:
+ return nil
+ }
+}
+
+var got1xxFuncForTests func(int, textproto.MIMEHeader) error
+
+// get1xxTraceFunc returns the value of request's httptrace.ClientTrace.Got1xxResponse func,
+// if any. It returns nil if not set or if the Go version is too old.
+func (cs *clientStream) get1xxTraceFunc() func(int, textproto.MIMEHeader) error {
+ if fn := got1xxFuncForTests; fn != nil {
+ return fn
+ }
+ return traceGot1xxResponseFunc(cs.trace)
+}
+
+// awaitRequestCancel waits for the user to cancel a request, its context to
+// expire, or for the request to be done (any way it might be removed from the
+// cc.streams map: peer reset, successful completion, TCP connection breakage,
+// etc). If the request is canceled, then cs will be canceled and closed.
+func (cs *clientStream) awaitRequestCancel(req *http.Request) {
+ if err := awaitRequestCancel(req, cs.done); err != nil {
+ cs.cancelStream()
+ cs.bufPipe.CloseWithError(err)
+ }
+}
+
+func (cs *clientStream) cancelStream() {
+ cc := cs.cc
+ cc.mu.Lock()
+ didReset := cs.didReset
+ cs.didReset = true
+ cc.mu.Unlock()
+
+ if !didReset {
+ cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+ cc.forgetStreamID(cs.ID)
+ }
+}
+
+// checkResetOrDone reports any error sent in a RST_STREAM frame by the
+// server, or errStreamClosed if the stream is complete.
+func (cs *clientStream) checkResetOrDone() error {
+ select {
+ case <-cs.peerReset:
+ return cs.resetErr
+ case <-cs.done:
+ return errStreamClosed
+ default:
+ return nil
+ }
+}
+
+func (cs *clientStream) getStartedWrite() bool {
+ cc := cs.cc
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ return cs.startedWrite
+}
+
+func (cs *clientStream) abortRequestBodyWrite(err error) {
+ if err == nil {
+ panic("nil error")
+ }
+ cc := cs.cc
+ cc.mu.Lock()
+ cs.stopReqBody = err
+ cc.cond.Broadcast()
+ cc.mu.Unlock()
+}
+
+type stickyErrWriter struct {
+ w io.Writer
+ err *error
+}
+
+func (sew stickyErrWriter) Write(p []byte) (n int, err error) {
+ if *sew.err != nil {
+ return 0, *sew.err
+ }
+ n, err = sew.w.Write(p)
+ *sew.err = err
+ return
+}
+
+// noCachedConnError is the concrete type of ErrNoCachedConn, which
+// needs to be detected by net/http regardless of whether it's its
+// bundled version (in h2_bundle.go with a rewritten type name) or
+// from a user's x/net/http2. As such, as it has a unique method name
+// (IsHTTP2NoCachedConnError) that net/http sniffs for via func
+// isNoCachedConnError.
+type noCachedConnError struct{}
+
+func (noCachedConnError) IsHTTP2NoCachedConnError() {}
+func (noCachedConnError) Error() string { return "http2: no cached connection was available" }
+
+// isNoCachedConnError reports whether err is of type noCachedConnError
+// or its equivalent renamed type in net/http2's h2_bundle.go. Both types
+// may coexist in the same running program.
+func isNoCachedConnError(err error) bool {
+ _, ok := err.(interface{ IsHTTP2NoCachedConnError() })
+ return ok
+}
+
+var ErrNoCachedConn error = noCachedConnError{}
+
+// RoundTripOpt are options for the Transport.RoundTripOpt method.
+type RoundTripOpt struct {
+ // OnlyCachedConn controls whether RoundTripOpt may
+ // create a new TCP connection. If set true and
+ // no cached connection is available, RoundTripOpt
+ // will return ErrNoCachedConn.
+ OnlyCachedConn bool
+}
+
+func (t *Transport) RoundTrip(req *http.Request) (*http.Response, error) {
+ return t.RoundTripOpt(req, RoundTripOpt{})
+}
+
+// authorityAddr returns a given authority (a host/IP, or host:port / ip:port)
+// and returns a host:port. The port 443 is added if needed.
+func authorityAddr(scheme string, authority string) (addr string) {
+ host, port, err := net.SplitHostPort(authority)
+ if err != nil { // authority didn't have a port
+ port = "443"
+ if scheme == "http" {
+ port = "80"
+ }
+ host = authority
+ }
+ if a, err := idna.ToASCII(host); err == nil {
+ host = a
+ }
+ // IPv6 address literal, without a port:
+ if strings.HasPrefix(host, "[") && strings.HasSuffix(host, "]") {
+ return host + ":" + port
+ }
+ return net.JoinHostPort(host, port)
+}
+
+// RoundTripOpt is like RoundTrip, but takes options.
+func (t *Transport) RoundTripOpt(req *http.Request, opt RoundTripOpt) (*http.Response, error) {
+ if !(req.URL.Scheme == "https" || (req.URL.Scheme == "http" && t.AllowHTTP)) {
+ return nil, errors.New("http2: unsupported scheme")
+ }
+
+ addr := authorityAddr(req.URL.Scheme, req.URL.Host)
+ for retry := 0; ; retry++ {
+ cc, err := t.connPool().GetClientConn(req, addr)
+ if err != nil {
+ t.vlogf("http2: Transport failed to get client conn for %s: %v", addr, err)
+ return nil, err
+ }
+ traceGotConn(req, cc)
+ res, gotErrAfterReqBodyWrite, err := cc.roundTrip(req)
+ if err != nil && retry <= 6 {
+ if req, err = shouldRetryRequest(req, err, gotErrAfterReqBodyWrite); err == nil {
+ // After the first retry, do exponential backoff with 10% jitter.
+ if retry == 0 {
+ continue
+ }
+ backoff := float64(uint(1) << (uint(retry) - 1))
+ backoff += backoff * (0.1 * mathrand.Float64())
+ select {
+ case <-time.After(time.Second * time.Duration(backoff)):
+ continue
+ case <-req.Context().Done():
+ return nil, req.Context().Err()
+ }
+ }
+ }
+ if err != nil {
+ t.vlogf("RoundTrip failure: %v", err)
+ return nil, err
+ }
+ return res, nil
+ }
+}
+
+// CloseIdleConnections closes any connections which were previously
+// connected from previous requests but are now sitting idle.
+// It does not interrupt any connections currently in use.
+func (t *Transport) CloseIdleConnections() {
+ if cp, ok := t.connPool().(clientConnPoolIdleCloser); ok {
+ cp.closeIdleConnections()
+ }
+}
+
+var (
+ errClientConnClosed = errors.New("http2: client conn is closed")
+ errClientConnUnusable = errors.New("http2: client conn not usable")
+ errClientConnGotGoAway = errors.New("http2: Transport received Server's graceful shutdown GOAWAY")
+)
+
+// shouldRetryRequest is called by RoundTrip when a request fails to get
+// response headers. It is always called with a non-nil error.
+// It returns either a request to retry (either the same request, or a
+// modified clone), or an error if the request can't be replayed.
+func shouldRetryRequest(req *http.Request, err error, afterBodyWrite bool) (*http.Request, error) {
+ if !canRetryError(err) {
+ return nil, err
+ }
+ // If the Body is nil (or http.NoBody), it's safe to reuse
+ // this request and its Body.
+ if req.Body == nil || req.Body == http.NoBody {
+ return req, nil
+ }
+
+ // If the request body can be reset back to its original
+ // state via the optional req.GetBody, do that.
+ if req.GetBody != nil {
+ // TODO: consider a req.Body.Close here? or audit that all caller paths do?
+ body, err := req.GetBody()
+ if err != nil {
+ return nil, err
+ }
+ newReq := *req
+ newReq.Body = body
+ return &newReq, nil
+ }
+
+ // The Request.Body can't reset back to the beginning, but we
+ // don't seem to have started to read from it yet, so reuse
+ // the request directly. The "afterBodyWrite" means the
+ // bodyWrite process has started, which becomes true before
+ // the first Read.
+ if !afterBodyWrite {
+ return req, nil
+ }
+
+ return nil, fmt.Errorf("http2: Transport: cannot retry err [%v] after Request.Body was written; define Request.GetBody to avoid this error", err)
+}
+
+func canRetryError(err error) bool {
+ if err == errClientConnUnusable || err == errClientConnGotGoAway {
+ return true
+ }
+ if se, ok := err.(StreamError); ok {
+ return se.Code == ErrCodeRefusedStream
+ }
+ return false
+}
+
+func (t *Transport) dialClientConn(addr string, singleUse bool) (*ClientConn, error) {
+ host, _, err := net.SplitHostPort(addr)
+ if err != nil {
+ return nil, err
+ }
+ tconn, err := t.dialTLS()("tcp", addr, t.newTLSConfig(host))
+ if err != nil {
+ return nil, err
+ }
+ return t.newClientConn(tconn, singleUse)
+}
+
+func (t *Transport) newTLSConfig(host string) *tls.Config {
+ cfg := new(tls.Config)
+ if t.TLSClientConfig != nil {
+ *cfg = *t.TLSClientConfig.Clone()
+ }
+ if !strSliceContains(cfg.NextProtos, NextProtoTLS) {
+ cfg.NextProtos = append([]string{NextProtoTLS}, cfg.NextProtos...)
+ }
+ if cfg.ServerName == "" {
+ cfg.ServerName = host
+ }
+ return cfg
+}
+
+func (t *Transport) dialTLS() func(string, string, *tls.Config) (net.Conn, error) {
+ if t.DialTLS != nil {
+ return t.DialTLS
+ }
+ return t.dialTLSDefault
+}
+
+func (t *Transport) dialTLSDefault(network, addr string, cfg *tls.Config) (net.Conn, error) {
+ cn, err := tls.Dial(network, addr, cfg)
+ if err != nil {
+ return nil, err
+ }
+ if err := cn.Handshake(); err != nil {
+ return nil, err
+ }
+ if !cfg.InsecureSkipVerify {
+ if err := cn.VerifyHostname(cfg.ServerName); err != nil {
+ return nil, err
+ }
+ }
+ state := cn.ConnectionState()
+ if p := state.NegotiatedProtocol; p != NextProtoTLS {
+ return nil, fmt.Errorf("http2: unexpected ALPN protocol %q; want %q", p, NextProtoTLS)
+ }
+ if !state.NegotiatedProtocolIsMutual {
+ return nil, errors.New("http2: could not negotiate protocol mutually")
+ }
+ return cn, nil
+}
+
+// disableKeepAlives reports whether connections should be closed as
+// soon as possible after handling the first request.
+func (t *Transport) disableKeepAlives() bool {
+ return t.t1 != nil && t.t1.DisableKeepAlives
+}
+
+func (t *Transport) expectContinueTimeout() time.Duration {
+ if t.t1 == nil {
+ return 0
+ }
+ return t.t1.ExpectContinueTimeout
+}
+
+func (t *Transport) NewClientConn(c net.Conn) (*ClientConn, error) {
+ return t.newClientConn(c, false)
+}
+
+func (t *Transport) newClientConn(c net.Conn, singleUse bool) (*ClientConn, error) {
+ cc := &ClientConn{
+ t: t,
+ tconn: c,
+ readerDone: make(chan struct{}),
+ nextStreamID: 1,
+ maxFrameSize: 16 << 10, // spec default
+ initialWindowSize: 65535, // spec default
+ maxConcurrentStreams: 1000, // "infinite", per spec. 1000 seems good enough.
+ peerMaxHeaderListSize: 0xffffffffffffffff, // "infinite", per spec. Use 2^64-1 instead.
+ streams: make(map[uint32]*clientStream),
+ singleUse: singleUse,
+ wantSettingsAck: true,
+ pings: make(map[[8]byte]chan struct{}),
+ }
+ if d := t.idleConnTimeout(); d != 0 {
+ cc.idleTimeout = d
+ cc.idleTimer = time.AfterFunc(d, cc.onIdleTimeout)
+ }
+ if VerboseLogs {
+ t.vlogf("http2: Transport creating client conn %p to %v", cc, c.RemoteAddr())
+ }
+
+ cc.cond = sync.NewCond(&cc.mu)
+ cc.flow.add(int32(initialWindowSize))
+
+ // TODO: adjust this writer size to account for frame size +
+ // MTU + crypto/tls record padding.
+ cc.bw = bufio.NewWriter(stickyErrWriter{c, &cc.werr})
+ cc.br = bufio.NewReader(c)
+ cc.fr = NewFramer(cc.bw, cc.br)
+ cc.fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
+ cc.fr.MaxHeaderListSize = t.maxHeaderListSize()
+
+ // TODO: SetMaxDynamicTableSize, SetMaxDynamicTableSizeLimit on
+ // henc in response to SETTINGS frames?
+ cc.henc = hpack.NewEncoder(&cc.hbuf)
+
+ if t.AllowHTTP {
+ cc.nextStreamID = 3
+ }
+
+ if cs, ok := c.(connectionStater); ok {
+ state := cs.ConnectionState()
+ cc.tlsState = &state
+ }
+
+ initialSettings := []Setting{
+ {ID: SettingEnablePush, Val: 0},
+ {ID: SettingInitialWindowSize, Val: transportDefaultStreamFlow},
+ }
+ if max := t.maxHeaderListSize(); max != 0 {
+ initialSettings = append(initialSettings, Setting{ID: SettingMaxHeaderListSize, Val: max})
+ }
+
+ cc.bw.Write(clientPreface)
+ cc.fr.WriteSettings(initialSettings...)
+ cc.fr.WriteWindowUpdate(0, transportDefaultConnFlow)
+ cc.inflow.add(transportDefaultConnFlow + initialWindowSize)
+ cc.bw.Flush()
+ if cc.werr != nil {
+ return nil, cc.werr
+ }
+
+ go cc.readLoop()
+ return cc, nil
+}
+
+func (cc *ClientConn) setGoAway(f *GoAwayFrame) {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+
+ old := cc.goAway
+ cc.goAway = f
+
+ // Merge the previous and current GoAway error frames.
+ if cc.goAwayDebug == "" {
+ cc.goAwayDebug = string(f.DebugData())
+ }
+ if old != nil && old.ErrCode != ErrCodeNo {
+ cc.goAway.ErrCode = old.ErrCode
+ }
+ last := f.LastStreamID
+ for streamID, cs := range cc.streams {
+ if streamID > last {
+ select {
+ case cs.resc <- resAndError{err: errClientConnGotGoAway}:
+ default:
+ }
+ }
+ }
+}
+
+// CanTakeNewRequest reports whether the connection can take a new request,
+// meaning it has not been closed or received or sent a GOAWAY.
+func (cc *ClientConn) CanTakeNewRequest() bool {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ return cc.canTakeNewRequestLocked()
+}
+
+// clientConnIdleState describes the suitability of a client
+// connection to initiate a new RoundTrip request.
+type clientConnIdleState struct {
+ canTakeNewRequest bool
+ freshConn bool // whether it's unused by any previous request
+}
+
+func (cc *ClientConn) idleState() clientConnIdleState {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ return cc.idleStateLocked()
+}
+
+func (cc *ClientConn) idleStateLocked() (st clientConnIdleState) {
+ if cc.singleUse && cc.nextStreamID > 1 {
+ return
+ }
+ var maxConcurrentOkay bool
+ if cc.t.StrictMaxConcurrentStreams {
+ // We'll tell the caller we can take a new request to
+ // prevent the caller from dialing a new TCP
+ // connection, but then we'll block later before
+ // writing it.
+ maxConcurrentOkay = true
+ } else {
+ maxConcurrentOkay = int64(len(cc.streams)+1) < int64(cc.maxConcurrentStreams)
+ }
+
+ st.canTakeNewRequest = cc.goAway == nil && !cc.closed && !cc.closing && maxConcurrentOkay &&
+ int64(cc.nextStreamID)+2*int64(cc.pendingRequests) < math.MaxInt32
+ st.freshConn = cc.nextStreamID == 1 && st.canTakeNewRequest
+ return
+}
+
+func (cc *ClientConn) canTakeNewRequestLocked() bool {
+ st := cc.idleStateLocked()
+ return st.canTakeNewRequest
+}
+
+// onIdleTimeout is called from a time.AfterFunc goroutine. It will
+// only be called when we're idle, but because we're coming from a new
+// goroutine, there could be a new request coming in at the same time,
+// so this simply calls the synchronized closeIfIdle to shut down this
+// connection. The timer could just call closeIfIdle, but this is more
+// clear.
+func (cc *ClientConn) onIdleTimeout() {
+ cc.closeIfIdle()
+}
+
+func (cc *ClientConn) closeIfIdle() {
+ cc.mu.Lock()
+ if len(cc.streams) > 0 {
+ cc.mu.Unlock()
+ return
+ }
+ cc.closed = true
+ nextID := cc.nextStreamID
+ // TODO: do clients send GOAWAY too? maybe? Just Close:
+ cc.mu.Unlock()
+
+ if VerboseLogs {
+ cc.vlogf("http2: Transport closing idle conn %p (forSingleUse=%v, maxStream=%v)", cc, cc.singleUse, nextID-2)
+ }
+ cc.tconn.Close()
+}
+
+var shutdownEnterWaitStateHook = func() {}
+
+// Shutdown gracefully close the client connection, waiting for running streams to complete.
+func (cc *ClientConn) Shutdown(ctx context.Context) error {
+ if err := cc.sendGoAway(); err != nil {
+ return err
+ }
+ // Wait for all in-flight streams to complete or connection to close
+ done := make(chan error, 1)
+ cancelled := false // guarded by cc.mu
+ go func() {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ for {
+ if len(cc.streams) == 0 || cc.closed {
+ cc.closed = true
+ done <- cc.tconn.Close()
+ break
+ }
+ if cancelled {
+ break
+ }
+ cc.cond.Wait()
+ }
+ }()
+ shutdownEnterWaitStateHook()
+ select {
+ case err := <-done:
+ return err
+ case <-ctx.Done():
+ cc.mu.Lock()
+ // Free the goroutine above
+ cancelled = true
+ cc.cond.Broadcast()
+ cc.mu.Unlock()
+ return ctx.Err()
+ }
+}
+
+func (cc *ClientConn) sendGoAway() error {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ cc.wmu.Lock()
+ defer cc.wmu.Unlock()
+ if cc.closing {
+ // GOAWAY sent already
+ return nil
+ }
+ // Send a graceful shutdown frame to server
+ maxStreamID := cc.nextStreamID
+ if err := cc.fr.WriteGoAway(maxStreamID, ErrCodeNo, nil); err != nil {
+ return err
+ }
+ if err := cc.bw.Flush(); err != nil {
+ return err
+ }
+ // Prevent new requests
+ cc.closing = true
+ return nil
+}
+
+// Close closes the client connection immediately.
+//
+// In-flight requests are interrupted. For a graceful shutdown, use Shutdown instead.
+func (cc *ClientConn) Close() error {
+ cc.mu.Lock()
+ defer cc.cond.Broadcast()
+ defer cc.mu.Unlock()
+ err := errors.New("http2: client connection force closed via ClientConn.Close")
+ for id, cs := range cc.streams {
+ select {
+ case cs.resc <- resAndError{err: err}:
+ default:
+ }
+ cs.bufPipe.CloseWithError(err)
+ delete(cc.streams, id)
+ }
+ cc.closed = true
+ return cc.tconn.Close()
+}
+
+const maxAllocFrameSize = 512 << 10
+
+// frameBuffer returns a scratch buffer suitable for writing DATA frames.
+// They're capped at the min of the peer's max frame size or 512KB
+// (kinda arbitrarily), but definitely capped so we don't allocate 4GB
+// bufers.
+func (cc *ClientConn) frameScratchBuffer() []byte {
+ cc.mu.Lock()
+ size := cc.maxFrameSize
+ if size > maxAllocFrameSize {
+ size = maxAllocFrameSize
+ }
+ for i, buf := range cc.freeBuf {
+ if len(buf) >= int(size) {
+ cc.freeBuf[i] = nil
+ cc.mu.Unlock()
+ return buf[:size]
+ }
+ }
+ cc.mu.Unlock()
+ return make([]byte, size)
+}
+
+func (cc *ClientConn) putFrameScratchBuffer(buf []byte) {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ const maxBufs = 4 // arbitrary; 4 concurrent requests per conn? investigate.
+ if len(cc.freeBuf) < maxBufs {
+ cc.freeBuf = append(cc.freeBuf, buf)
+ return
+ }
+ for i, old := range cc.freeBuf {
+ if old == nil {
+ cc.freeBuf[i] = buf
+ return
+ }
+ }
+ // forget about it.
+}
+
+// errRequestCanceled is a copy of net/http's errRequestCanceled because it's not
+// exported. At least they'll be DeepEqual for h1-vs-h2 comparisons tests.
+var errRequestCanceled = errors.New("net/http: request canceled")
+
+func commaSeparatedTrailers(req *http.Request) (string, error) {
+ keys := make([]string, 0, len(req.Trailer))
+ for k := range req.Trailer {
+ k = http.CanonicalHeaderKey(k)
+ switch k {
+ case "Transfer-Encoding", "Trailer", "Content-Length":
+ return "", &badStringError{"invalid Trailer key", k}
+ }
+ keys = append(keys, k)
+ }
+ if len(keys) > 0 {
+ sort.Strings(keys)
+ return strings.Join(keys, ","), nil
+ }
+ return "", nil
+}
+
+func (cc *ClientConn) responseHeaderTimeout() time.Duration {
+ if cc.t.t1 != nil {
+ return cc.t.t1.ResponseHeaderTimeout
+ }
+ // No way to do this (yet?) with just an http2.Transport. Probably
+ // no need. Request.Cancel this is the new way. We only need to support
+ // this for compatibility with the old http.Transport fields when
+ // we're doing transparent http2.
+ return 0
+}
+
+// checkConnHeaders checks whether req has any invalid connection-level headers.
+// per RFC 7540 section 8.1.2.2: Connection-Specific Header Fields.
+// Certain headers are special-cased as okay but not transmitted later.
+func checkConnHeaders(req *http.Request) error {
+ if v := req.Header.Get("Upgrade"); v != "" {
+ return fmt.Errorf("http2: invalid Upgrade request header: %q", req.Header["Upgrade"])
+ }
+ if vv := req.Header["Transfer-Encoding"]; len(vv) > 0 && (len(vv) > 1 || vv[0] != "" && vv[0] != "chunked") {
+ return fmt.Errorf("http2: invalid Transfer-Encoding request header: %q", vv)
+ }
+ if vv := req.Header["Connection"]; len(vv) > 0 && (len(vv) > 1 || vv[0] != "" && !strings.EqualFold(vv[0], "close") && !strings.EqualFold(vv[0], "keep-alive")) {
+ return fmt.Errorf("http2: invalid Connection request header: %q", vv)
+ }
+ return nil
+}
+
+// actualContentLength returns a sanitized version of
+// req.ContentLength, where 0 actually means zero (not unknown) and -1
+// means unknown.
+func actualContentLength(req *http.Request) int64 {
+ if req.Body == nil || req.Body == http.NoBody {
+ return 0
+ }
+ if req.ContentLength != 0 {
+ return req.ContentLength
+ }
+ return -1
+}
+
+func (cc *ClientConn) RoundTrip(req *http.Request) (*http.Response, error) {
+ resp, _, err := cc.roundTrip(req)
+ return resp, err
+}
+
+func (cc *ClientConn) roundTrip(req *http.Request) (res *http.Response, gotErrAfterReqBodyWrite bool, err error) {
+ if err := checkConnHeaders(req); err != nil {
+ return nil, false, err
+ }
+ if cc.idleTimer != nil {
+ cc.idleTimer.Stop()
+ }
+
+ trailers, err := commaSeparatedTrailers(req)
+ if err != nil {
+ return nil, false, err
+ }
+ hasTrailers := trailers != ""
+
+ cc.mu.Lock()
+ if err := cc.awaitOpenSlotForRequest(req); err != nil {
+ cc.mu.Unlock()
+ return nil, false, err
+ }
+
+ body := req.Body
+ contentLen := actualContentLength(req)
+ hasBody := contentLen != 0
+
+ // TODO(bradfitz): this is a copy of the logic in net/http. Unify somewhere?
+ var requestedGzip bool
+ if !cc.t.disableCompression() &&
+ req.Header.Get("Accept-Encoding") == "" &&
+ req.Header.Get("Range") == "" &&
+ req.Method != "HEAD" {
+ // Request gzip only, not deflate. Deflate is ambiguous and
+ // not as universally supported anyway.
+ // See: http://www.gzip.org/zlib/zlib_faq.html#faq38
+ //
+ // Note that we don't request this for HEAD requests,
+ // due to a bug in nginx:
+ // http://trac.nginx.org/nginx/ticket/358
+ // https://golang.org/issue/5522
+ //
+ // We don't request gzip if the request is for a range, since
+ // auto-decoding a portion of a gzipped document will just fail
+ // anyway. See https://golang.org/issue/8923
+ requestedGzip = true
+ }
+
+ // we send: HEADERS{1}, CONTINUATION{0,} + DATA{0,} (DATA is
+ // sent by writeRequestBody below, along with any Trailers,
+ // again in form HEADERS{1}, CONTINUATION{0,})
+ hdrs, err := cc.encodeHeaders(req, requestedGzip, trailers, contentLen)
+ if err != nil {
+ cc.mu.Unlock()
+ return nil, false, err
+ }
+
+ cs := cc.newStream()
+ cs.req = req
+ cs.trace = httptrace.ContextClientTrace(req.Context())
+ cs.requestedGzip = requestedGzip
+ bodyWriter := cc.t.getBodyWriterState(cs, body)
+ cs.on100 = bodyWriter.on100
+
+ cc.wmu.Lock()
+ endStream := !hasBody && !hasTrailers
+ werr := cc.writeHeaders(cs.ID, endStream, int(cc.maxFrameSize), hdrs)
+ cc.wmu.Unlock()
+ traceWroteHeaders(cs.trace)
+ cc.mu.Unlock()
+
+ if werr != nil {
+ if hasBody {
+ req.Body.Close() // per RoundTripper contract
+ bodyWriter.cancel()
+ }
+ cc.forgetStreamID(cs.ID)
+ // Don't bother sending a RST_STREAM (our write already failed;
+ // no need to keep writing)
+ traceWroteRequest(cs.trace, werr)
+ return nil, false, werr
+ }
+
+ var respHeaderTimer <-chan time.Time
+ if hasBody {
+ bodyWriter.scheduleBodyWrite()
+ } else {
+ traceWroteRequest(cs.trace, nil)
+ if d := cc.responseHeaderTimeout(); d != 0 {
+ timer := time.NewTimer(d)
+ defer timer.Stop()
+ respHeaderTimer = timer.C
+ }
+ }
+
+ readLoopResCh := cs.resc
+ bodyWritten := false
+ ctx := req.Context()
+
+ handleReadLoopResponse := func(re resAndError) (*http.Response, bool, error) {
+ res := re.res
+ if re.err != nil || res.StatusCode > 299 {
+ // On error or status code 3xx, 4xx, 5xx, etc abort any
+ // ongoing write, assuming that the server doesn't care
+ // about our request body. If the server replied with 1xx or
+ // 2xx, however, then assume the server DOES potentially
+ // want our body (e.g. full-duplex streaming:
+ // golang.org/issue/13444). If it turns out the server
+ // doesn't, they'll RST_STREAM us soon enough. This is a
+ // heuristic to avoid adding knobs to Transport. Hopefully
+ // we can keep it.
+ bodyWriter.cancel()
+ cs.abortRequestBodyWrite(errStopReqBodyWrite)
+ }
+ if re.err != nil {
+ cc.forgetStreamID(cs.ID)
+ return nil, cs.getStartedWrite(), re.err
+ }
+ res.Request = req
+ res.TLS = cc.tlsState
+ return res, false, nil
+ }
+
+ for {
+ select {
+ case re := <-readLoopResCh:
+ return handleReadLoopResponse(re)
+ case <-respHeaderTimer:
+ if !hasBody || bodyWritten {
+ cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+ } else {
+ bodyWriter.cancel()
+ cs.abortRequestBodyWrite(errStopReqBodyWriteAndCancel)
+ }
+ cc.forgetStreamID(cs.ID)
+ return nil, cs.getStartedWrite(), errTimeout
+ case <-ctx.Done():
+ if !hasBody || bodyWritten {
+ cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+ } else {
+ bodyWriter.cancel()
+ cs.abortRequestBodyWrite(errStopReqBodyWriteAndCancel)
+ }
+ cc.forgetStreamID(cs.ID)
+ return nil, cs.getStartedWrite(), ctx.Err()
+ case <-req.Cancel:
+ if !hasBody || bodyWritten {
+ cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+ } else {
+ bodyWriter.cancel()
+ cs.abortRequestBodyWrite(errStopReqBodyWriteAndCancel)
+ }
+ cc.forgetStreamID(cs.ID)
+ return nil, cs.getStartedWrite(), errRequestCanceled
+ case <-cs.peerReset:
+ // processResetStream already removed the
+ // stream from the streams map; no need for
+ // forgetStreamID.
+ return nil, cs.getStartedWrite(), cs.resetErr
+ case err := <-bodyWriter.resc:
+ // Prefer the read loop's response, if available. Issue 16102.
+ select {
+ case re := <-readLoopResCh:
+ return handleReadLoopResponse(re)
+ default:
+ }
+ if err != nil {
+ cc.forgetStreamID(cs.ID)
+ return nil, cs.getStartedWrite(), err
+ }
+ bodyWritten = true
+ if d := cc.responseHeaderTimeout(); d != 0 {
+ timer := time.NewTimer(d)
+ defer timer.Stop()
+ respHeaderTimer = timer.C
+ }
+ }
+ }
+}
+
+// awaitOpenSlotForRequest waits until len(streams) < maxConcurrentStreams.
+// Must hold cc.mu.
+func (cc *ClientConn) awaitOpenSlotForRequest(req *http.Request) error {
+ var waitingForConn chan struct{}
+ var waitingForConnErr error // guarded by cc.mu
+ for {
+ cc.lastActive = time.Now()
+ if cc.closed || !cc.canTakeNewRequestLocked() {
+ if waitingForConn != nil {
+ close(waitingForConn)
+ }
+ return errClientConnUnusable
+ }
+ if int64(len(cc.streams))+1 <= int64(cc.maxConcurrentStreams) {
+ if waitingForConn != nil {
+ close(waitingForConn)
+ }
+ return nil
+ }
+ // Unfortunately, we cannot wait on a condition variable and channel at
+ // the same time, so instead, we spin up a goroutine to check if the
+ // request is canceled while we wait for a slot to open in the connection.
+ if waitingForConn == nil {
+ waitingForConn = make(chan struct{})
+ go func() {
+ if err := awaitRequestCancel(req, waitingForConn); err != nil {
+ cc.mu.Lock()
+ waitingForConnErr = err
+ cc.cond.Broadcast()
+ cc.mu.Unlock()
+ }
+ }()
+ }
+ cc.pendingRequests++
+ cc.cond.Wait()
+ cc.pendingRequests--
+ if waitingForConnErr != nil {
+ return waitingForConnErr
+ }
+ }
+}
+
+// requires cc.wmu be held
+func (cc *ClientConn) writeHeaders(streamID uint32, endStream bool, maxFrameSize int, hdrs []byte) error {
+ first := true // first frame written (HEADERS is first, then CONTINUATION)
+ for len(hdrs) > 0 && cc.werr == nil {
+ chunk := hdrs
+ if len(chunk) > maxFrameSize {
+ chunk = chunk[:maxFrameSize]
+ }
+ hdrs = hdrs[len(chunk):]
+ endHeaders := len(hdrs) == 0
+ if first {
+ cc.fr.WriteHeaders(HeadersFrameParam{
+ StreamID: streamID,
+ BlockFragment: chunk,
+ EndStream: endStream,
+ EndHeaders: endHeaders,
+ })
+ first = false
+ } else {
+ cc.fr.WriteContinuation(streamID, endHeaders, chunk)
+ }
+ }
+ // TODO(bradfitz): this Flush could potentially block (as
+ // could the WriteHeaders call(s) above), which means they
+ // wouldn't respond to Request.Cancel being readable. That's
+ // rare, but this should probably be in a goroutine.
+ cc.bw.Flush()
+ return cc.werr
+}
+
+// internal error values; they don't escape to callers
+var (
+ // abort request body write; don't send cancel
+ errStopReqBodyWrite = errors.New("http2: aborting request body write")
+
+ // abort request body write, but send stream reset of cancel.
+ errStopReqBodyWriteAndCancel = errors.New("http2: canceling request")
+)
+
+func (cs *clientStream) writeRequestBody(body io.Reader, bodyCloser io.Closer) (err error) {
+ cc := cs.cc
+ sentEnd := false // whether we sent the final DATA frame w/ END_STREAM
+ buf := cc.frameScratchBuffer()
+ defer cc.putFrameScratchBuffer(buf)
+
+ defer func() {
+ traceWroteRequest(cs.trace, err)
+ // TODO: write h12Compare test showing whether
+ // Request.Body is closed by the Transport,
+ // and in multiple cases: server replies <=299 and >299
+ // while still writing request body
+ cerr := bodyCloser.Close()
+ if err == nil {
+ err = cerr
+ }
+ }()
+
+ req := cs.req
+ hasTrailers := req.Trailer != nil
+
+ var sawEOF bool
+ for !sawEOF {
+ n, err := body.Read(buf)
+ if err == io.EOF {
+ sawEOF = true
+ err = nil
+ } else if err != nil {
+ cc.writeStreamReset(cs.ID, ErrCodeCancel, err)
+ return err
+ }
+
+ remain := buf[:n]
+ for len(remain) > 0 && err == nil {
+ var allowed int32
+ allowed, err = cs.awaitFlowControl(len(remain))
+ switch {
+ case err == errStopReqBodyWrite:
+ return err
+ case err == errStopReqBodyWriteAndCancel:
+ cc.writeStreamReset(cs.ID, ErrCodeCancel, nil)
+ return err
+ case err != nil:
+ return err
+ }
+ cc.wmu.Lock()
+ data := remain[:allowed]
+ remain = remain[allowed:]
+ sentEnd = sawEOF && len(remain) == 0 && !hasTrailers
+ err = cc.fr.WriteData(cs.ID, sentEnd, data)
+ if err == nil {
+ // TODO(bradfitz): this flush is for latency, not bandwidth.
+ // Most requests won't need this. Make this opt-in or
+ // opt-out? Use some heuristic on the body type? Nagel-like
+ // timers? Based on 'n'? Only last chunk of this for loop,
+ // unless flow control tokens are low? For now, always.
+ // If we change this, see comment below.
+ err = cc.bw.Flush()
+ }
+ cc.wmu.Unlock()
+ }
+ if err != nil {
+ return err
+ }
+ }
+
+ if sentEnd {
+ // Already sent END_STREAM (which implies we have no
+ // trailers) and flushed, because currently all
+ // WriteData frames above get a flush. So we're done.
+ return nil
+ }
+
+ var trls []byte
+ if hasTrailers {
+ cc.mu.Lock()
+ trls, err = cc.encodeTrailers(req)
+ cc.mu.Unlock()
+ if err != nil {
+ cc.writeStreamReset(cs.ID, ErrCodeInternal, err)
+ cc.forgetStreamID(cs.ID)
+ return err
+ }
+ }
+
+ cc.mu.Lock()
+ maxFrameSize := int(cc.maxFrameSize)
+ cc.mu.Unlock()
+
+ cc.wmu.Lock()
+ defer cc.wmu.Unlock()
+
+ // Two ways to send END_STREAM: either with trailers, or
+ // with an empty DATA frame.
+ if len(trls) > 0 {
+ err = cc.writeHeaders(cs.ID, true, maxFrameSize, trls)
+ } else {
+ err = cc.fr.WriteData(cs.ID, true, nil)
+ }
+ if ferr := cc.bw.Flush(); ferr != nil && err == nil {
+ err = ferr
+ }
+ return err
+}
+
+// awaitFlowControl waits for [1, min(maxBytes, cc.cs.maxFrameSize)] flow
+// control tokens from the server.
+// It returns either the non-zero number of tokens taken or an error
+// if the stream is dead.
+func (cs *clientStream) awaitFlowControl(maxBytes int) (taken int32, err error) {
+ cc := cs.cc
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ for {
+ if cc.closed {
+ return 0, errClientConnClosed
+ }
+ if cs.stopReqBody != nil {
+ return 0, cs.stopReqBody
+ }
+ if err := cs.checkResetOrDone(); err != nil {
+ return 0, err
+ }
+ if a := cs.flow.available(); a > 0 {
+ take := a
+ if int(take) > maxBytes {
+
+ take = int32(maxBytes) // can't truncate int; take is int32
+ }
+ if take > int32(cc.maxFrameSize) {
+ take = int32(cc.maxFrameSize)
+ }
+ cs.flow.take(take)
+ return take, nil
+ }
+ cc.cond.Wait()
+ }
+}
+
+type badStringError struct {
+ what string
+ str string
+}
+
+func (e *badStringError) Error() string { return fmt.Sprintf("%s %q", e.what, e.str) }
+
+// requires cc.mu be held.
+func (cc *ClientConn) encodeHeaders(req *http.Request, addGzipHeader bool, trailers string, contentLength int64) ([]byte, error) {
+ cc.hbuf.Reset()
+
+ host := req.Host
+ if host == "" {
+ host = req.URL.Host
+ }
+ host, err := httpguts.PunycodeHostPort(host)
+ if err != nil {
+ return nil, err
+ }
+
+ var path string
+ if req.Method != "CONNECT" {
+ path = req.URL.RequestURI()
+ if !validPseudoPath(path) {
+ orig := path
+ path = strings.TrimPrefix(path, req.URL.Scheme+"://"+host)
+ if !validPseudoPath(path) {
+ if req.URL.Opaque != "" {
+ return nil, fmt.Errorf("invalid request :path %q from URL.Opaque = %q", orig, req.URL.Opaque)
+ } else {
+ return nil, fmt.Errorf("invalid request :path %q", orig)
+ }
+ }
+ }
+ }
+
+ // Check for any invalid headers and return an error before we
+ // potentially pollute our hpack state. (We want to be able to
+ // continue to reuse the hpack encoder for future requests)
+ for k, vv := range req.Header {
+ if !httpguts.ValidHeaderFieldName(k) {
+ return nil, fmt.Errorf("invalid HTTP header name %q", k)
+ }
+ for _, v := range vv {
+ if !httpguts.ValidHeaderFieldValue(v) {
+ return nil, fmt.Errorf("invalid HTTP header value %q for header %q", v, k)
+ }
+ }
+ }
+
+ enumerateHeaders := func(f func(name, value string)) {
+ // 8.1.2.3 Request Pseudo-Header Fields
+ // The :path pseudo-header field includes the path and query parts of the
+ // target URI (the path-absolute production and optionally a '?' character
+ // followed by the query production (see Sections 3.3 and 3.4 of
+ // [RFC3986]).
+ f(":authority", host)
+ f(":method", req.Method)
+ if req.Method != "CONNECT" {
+ f(":path", path)
+ f(":scheme", req.URL.Scheme)
+ }
+ if trailers != "" {
+ f("trailer", trailers)
+ }
+
+ var didUA bool
+ for k, vv := range req.Header {
+ if strings.EqualFold(k, "host") || strings.EqualFold(k, "content-length") {
+ // Host is :authority, already sent.
+ // Content-Length is automatic, set below.
+ continue
+ } else if strings.EqualFold(k, "connection") || strings.EqualFold(k, "proxy-connection") ||
+ strings.EqualFold(k, "transfer-encoding") || strings.EqualFold(k, "upgrade") ||
+ strings.EqualFold(k, "keep-alive") {
+ // Per 8.1.2.2 Connection-Specific Header
+ // Fields, don't send connection-specific
+ // fields. We have already checked if any
+ // are error-worthy so just ignore the rest.
+ continue
+ } else if strings.EqualFold(k, "user-agent") {
+ // Match Go's http1 behavior: at most one
+ // User-Agent. If set to nil or empty string,
+ // then omit it. Otherwise if not mentioned,
+ // include the default (below).
+ didUA = true
+ if len(vv) < 1 {
+ continue
+ }
+ vv = vv[:1]
+ if vv[0] == "" {
+ continue
+ }
+
+ }
+
+ for _, v := range vv {
+ f(k, v)
+ }
+ }
+ if shouldSendReqContentLength(req.Method, contentLength) {
+ f("content-length", strconv.FormatInt(contentLength, 10))
+ }
+ if addGzipHeader {
+ f("accept-encoding", "gzip")
+ }
+ if !didUA {
+ f("user-agent", defaultUserAgent)
+ }
+ }
+
+ // Do a first pass over the headers counting bytes to ensure
+ // we don't exceed cc.peerMaxHeaderListSize. This is done as a
+ // separate pass before encoding the headers to prevent
+ // modifying the hpack state.
+ hlSize := uint64(0)
+ enumerateHeaders(func(name, value string) {
+ hf := hpack.HeaderField{Name: name, Value: value}
+ hlSize += uint64(hf.Size())
+ })
+
+ if hlSize > cc.peerMaxHeaderListSize {
+ return nil, errRequestHeaderListSize
+ }
+
+ trace := httptrace.ContextClientTrace(req.Context())
+ traceHeaders := traceHasWroteHeaderField(trace)
+
+ // Header list size is ok. Write the headers.
+ enumerateHeaders(func(name, value string) {
+ name = strings.ToLower(name)
+ cc.writeHeader(name, value)
+ if traceHeaders {
+ traceWroteHeaderField(trace, name, value)
+ }
+ })
+
+ return cc.hbuf.Bytes(), nil
+}
+
+// shouldSendReqContentLength reports whether the http2.Transport should send
+// a "content-length" request header. This logic is basically a copy of the net/http
+// transferWriter.shouldSendContentLength.
+// The contentLength is the corrected contentLength (so 0 means actually 0, not unknown).
+// -1 means unknown.
+func shouldSendReqContentLength(method string, contentLength int64) bool {
+ if contentLength > 0 {
+ return true
+ }
+ if contentLength < 0 {
+ return false
+ }
+ // For zero bodies, whether we send a content-length depends on the method.
+ // It also kinda doesn't matter for http2 either way, with END_STREAM.
+ switch method {
+ case "POST", "PUT", "PATCH":
+ return true
+ default:
+ return false
+ }
+}
+
+// requires cc.mu be held.
+func (cc *ClientConn) encodeTrailers(req *http.Request) ([]byte, error) {
+ cc.hbuf.Reset()
+
+ hlSize := uint64(0)
+ for k, vv := range req.Trailer {
+ for _, v := range vv {
+ hf := hpack.HeaderField{Name: k, Value: v}
+ hlSize += uint64(hf.Size())
+ }
+ }
+ if hlSize > cc.peerMaxHeaderListSize {
+ return nil, errRequestHeaderListSize
+ }
+
+ for k, vv := range req.Trailer {
+ // Transfer-Encoding, etc.. have already been filtered at the
+ // start of RoundTrip
+ lowKey := strings.ToLower(k)
+ for _, v := range vv {
+ cc.writeHeader(lowKey, v)
+ }
+ }
+ return cc.hbuf.Bytes(), nil
+}
+
+func (cc *ClientConn) writeHeader(name, value string) {
+ if VerboseLogs {
+ log.Printf("http2: Transport encoding header %q = %q", name, value)
+ }
+ cc.henc.WriteField(hpack.HeaderField{Name: name, Value: value})
+}
+
+type resAndError struct {
+ res *http.Response
+ err error
+}
+
+// requires cc.mu be held.
+func (cc *ClientConn) newStream() *clientStream {
+ cs := &clientStream{
+ cc: cc,
+ ID: cc.nextStreamID,
+ resc: make(chan resAndError, 1),
+ peerReset: make(chan struct{}),
+ done: make(chan struct{}),
+ }
+ cs.flow.add(int32(cc.initialWindowSize))
+ cs.flow.setConnFlow(&cc.flow)
+ cs.inflow.add(transportDefaultStreamFlow)
+ cs.inflow.setConnFlow(&cc.inflow)
+ cc.nextStreamID += 2
+ cc.streams[cs.ID] = cs
+ return cs
+}
+
+func (cc *ClientConn) forgetStreamID(id uint32) {
+ cc.streamByID(id, true)
+}
+
+func (cc *ClientConn) streamByID(id uint32, andRemove bool) *clientStream {
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ cs := cc.streams[id]
+ if andRemove && cs != nil && !cc.closed {
+ cc.lastActive = time.Now()
+ delete(cc.streams, id)
+ if len(cc.streams) == 0 && cc.idleTimer != nil {
+ cc.idleTimer.Reset(cc.idleTimeout)
+ }
+ close(cs.done)
+ // Wake up checkResetOrDone via clientStream.awaitFlowControl and
+ // wake up RoundTrip if there is a pending request.
+ cc.cond.Broadcast()
+ }
+ return cs
+}
+
+// clientConnReadLoop is the state owned by the clientConn's frame-reading readLoop.
+type clientConnReadLoop struct {
+ cc *ClientConn
+ closeWhenIdle bool
+}
+
+// readLoop runs in its own goroutine and reads and dispatches frames.
+func (cc *ClientConn) readLoop() {
+ rl := &clientConnReadLoop{cc: cc}
+ defer rl.cleanup()
+ cc.readerErr = rl.run()
+ if ce, ok := cc.readerErr.(ConnectionError); ok {
+ cc.wmu.Lock()
+ cc.fr.WriteGoAway(0, ErrCode(ce), nil)
+ cc.wmu.Unlock()
+ }
+}
+
+// GoAwayError is returned by the Transport when the server closes the
+// TCP connection after sending a GOAWAY frame.
+type GoAwayError struct {
+ LastStreamID uint32
+ ErrCode ErrCode
+ DebugData string
+}
+
+func (e GoAwayError) Error() string {
+ return fmt.Sprintf("http2: server sent GOAWAY and closed the connection; LastStreamID=%v, ErrCode=%v, debug=%q",
+ e.LastStreamID, e.ErrCode, e.DebugData)
+}
+
+func isEOFOrNetReadError(err error) bool {
+ if err == io.EOF {
+ return true
+ }
+ ne, ok := err.(*net.OpError)
+ return ok && ne.Op == "read"
+}
+
+func (rl *clientConnReadLoop) cleanup() {
+ cc := rl.cc
+ defer cc.tconn.Close()
+ defer cc.t.connPool().MarkDead(cc)
+ defer close(cc.readerDone)
+
+ if cc.idleTimer != nil {
+ cc.idleTimer.Stop()
+ }
+
+ // Close any response bodies if the server closes prematurely.
+ // TODO: also do this if we've written the headers but not
+ // gotten a response yet.
+ err := cc.readerErr
+ cc.mu.Lock()
+ if cc.goAway != nil && isEOFOrNetReadError(err) {
+ err = GoAwayError{
+ LastStreamID: cc.goAway.LastStreamID,
+ ErrCode: cc.goAway.ErrCode,
+ DebugData: cc.goAwayDebug,
+ }
+ } else if err == io.EOF {
+ err = io.ErrUnexpectedEOF
+ }
+ for _, cs := range cc.streams {
+ cs.bufPipe.CloseWithError(err) // no-op if already closed
+ select {
+ case cs.resc <- resAndError{err: err}:
+ default:
+ }
+ close(cs.done)
+ }
+ cc.closed = true
+ cc.cond.Broadcast()
+ cc.mu.Unlock()
+}
+
+func (rl *clientConnReadLoop) run() error {
+ cc := rl.cc
+ rl.closeWhenIdle = cc.t.disableKeepAlives() || cc.singleUse
+ gotReply := false // ever saw a HEADERS reply
+ gotSettings := false
+ for {
+ f, err := cc.fr.ReadFrame()
+ if err != nil {
+ cc.vlogf("http2: Transport readFrame error on conn %p: (%T) %v", cc, err, err)
+ }
+ if se, ok := err.(StreamError); ok {
+ if cs := cc.streamByID(se.StreamID, false); cs != nil {
+ cs.cc.writeStreamReset(cs.ID, se.Code, err)
+ cs.cc.forgetStreamID(cs.ID)
+ if se.Cause == nil {
+ se.Cause = cc.fr.errDetail
+ }
+ rl.endStreamError(cs, se)
+ }
+ continue
+ } else if err != nil {
+ return err
+ }
+ if VerboseLogs {
+ cc.vlogf("http2: Transport received %s", summarizeFrame(f))
+ }
+ if !gotSettings {
+ if _, ok := f.(*SettingsFrame); !ok {
+ cc.logf("protocol error: received %T before a SETTINGS frame", f)
+ return ConnectionError(ErrCodeProtocol)
+ }
+ gotSettings = true
+ }
+ maybeIdle := false // whether frame might transition us to idle
+
+ switch f := f.(type) {
+ case *MetaHeadersFrame:
+ err = rl.processHeaders(f)
+ maybeIdle = true
+ gotReply = true
+ case *DataFrame:
+ err = rl.processData(f)
+ maybeIdle = true
+ case *GoAwayFrame:
+ err = rl.processGoAway(f)
+ maybeIdle = true
+ case *RSTStreamFrame:
+ err = rl.processResetStream(f)
+ maybeIdle = true
+ case *SettingsFrame:
+ err = rl.processSettings(f)
+ case *PushPromiseFrame:
+ err = rl.processPushPromise(f)
+ case *WindowUpdateFrame:
+ err = rl.processWindowUpdate(f)
+ case *PingFrame:
+ err = rl.processPing(f)
+ default:
+ cc.logf("Transport: unhandled response frame type %T", f)
+ }
+ if err != nil {
+ if VerboseLogs {
+ cc.vlogf("http2: Transport conn %p received error from processing frame %v: %v", cc, summarizeFrame(f), err)
+ }
+ return err
+ }
+ if rl.closeWhenIdle && gotReply && maybeIdle {
+ cc.closeIfIdle()
+ }
+ }
+}
+
+func (rl *clientConnReadLoop) processHeaders(f *MetaHeadersFrame) error {
+ cc := rl.cc
+ cs := cc.streamByID(f.StreamID, false)
+ if cs == nil {
+ // We'd get here if we canceled a request while the
+ // server had its response still in flight. So if this
+ // was just something we canceled, ignore it.
+ return nil
+ }
+ if f.StreamEnded() {
+ // Issue 20521: If the stream has ended, streamByID() causes
+ // clientStream.done to be closed, which causes the request's bodyWriter
+ // to be closed with an errStreamClosed, which may be received by
+ // clientConn.RoundTrip before the result of processing these headers.
+ // Deferring stream closure allows the header processing to occur first.
+ // clientConn.RoundTrip may still receive the bodyWriter error first, but
+ // the fix for issue 16102 prioritises any response.
+ //
+ // Issue 22413: If there is no request body, we should close the
+ // stream before writing to cs.resc so that the stream is closed
+ // immediately once RoundTrip returns.
+ if cs.req.Body != nil {
+ defer cc.forgetStreamID(f.StreamID)
+ } else {
+ cc.forgetStreamID(f.StreamID)
+ }
+ }
+ if !cs.firstByte {
+ if cs.trace != nil {
+ // TODO(bradfitz): move first response byte earlier,
+ // when we first read the 9 byte header, not waiting
+ // until all the HEADERS+CONTINUATION frames have been
+ // merged. This works for now.
+ traceFirstResponseByte(cs.trace)
+ }
+ cs.firstByte = true
+ }
+ if !cs.pastHeaders {
+ cs.pastHeaders = true
+ } else {
+ return rl.processTrailers(cs, f)
+ }
+
+ res, err := rl.handleResponse(cs, f)
+ if err != nil {
+ if _, ok := err.(ConnectionError); ok {
+ return err
+ }
+ // Any other error type is a stream error.
+ cs.cc.writeStreamReset(f.StreamID, ErrCodeProtocol, err)
+ cc.forgetStreamID(cs.ID)
+ cs.resc <- resAndError{err: err}
+ return nil // return nil from process* funcs to keep conn alive
+ }
+ if res == nil {
+ // (nil, nil) special case. See handleResponse docs.
+ return nil
+ }
+ cs.resTrailer = &res.Trailer
+ cs.resc <- resAndError{res: res}
+ return nil
+}
+
+// may return error types nil, or ConnectionError. Any other error value
+// is a StreamError of type ErrCodeProtocol. The returned error in that case
+// is the detail.
+//
+// As a special case, handleResponse may return (nil, nil) to skip the
+// frame (currently only used for 1xx responses).
+func (rl *clientConnReadLoop) handleResponse(cs *clientStream, f *MetaHeadersFrame) (*http.Response, error) {
+ if f.Truncated {
+ return nil, errResponseHeaderListSize
+ }
+
+ status := f.PseudoValue("status")
+ if status == "" {
+ return nil, errors.New("malformed response from server: missing status pseudo header")
+ }
+ statusCode, err := strconv.Atoi(status)
+ if err != nil {
+ return nil, errors.New("malformed response from server: malformed non-numeric status pseudo header")
+ }
+
+ header := make(http.Header)
+ res := &http.Response{
+ Proto: "HTTP/2.0",
+ ProtoMajor: 2,
+ Header: header,
+ StatusCode: statusCode,
+ Status: status + " " + http.StatusText(statusCode),
+ }
+ for _, hf := range f.RegularFields() {
+ key := http.CanonicalHeaderKey(hf.Name)
+ if key == "Trailer" {
+ t := res.Trailer
+ if t == nil {
+ t = make(http.Header)
+ res.Trailer = t
+ }
+ foreachHeaderElement(hf.Value, func(v string) {
+ t[http.CanonicalHeaderKey(v)] = nil
+ })
+ } else {
+ header[key] = append(header[key], hf.Value)
+ }
+ }
+
+ if statusCode >= 100 && statusCode <= 199 {
+ cs.num1xx++
+ const max1xxResponses = 5 // arbitrary bound on number of informational responses, same as net/http
+ if cs.num1xx > max1xxResponses {
+ return nil, errors.New("http2: too many 1xx informational responses")
+ }
+ if fn := cs.get1xxTraceFunc(); fn != nil {
+ if err := fn(statusCode, textproto.MIMEHeader(header)); err != nil {
+ return nil, err
+ }
+ }
+ if statusCode == 100 {
+ traceGot100Continue(cs.trace)
+ if cs.on100 != nil {
+ cs.on100() // forces any write delay timer to fire
+ }
+ }
+ cs.pastHeaders = false // do it all again
+ return nil, nil
+ }
+
+ streamEnded := f.StreamEnded()
+ isHead := cs.req.Method == "HEAD"
+ if !streamEnded || isHead {
+ res.ContentLength = -1
+ if clens := res.Header["Content-Length"]; len(clens) == 1 {
+ if clen64, err := strconv.ParseInt(clens[0], 10, 64); err == nil {
+ res.ContentLength = clen64
+ } else {
+ // TODO: care? unlike http/1, it won't mess up our framing, so it's
+ // more safe smuggling-wise to ignore.
+ }
+ } else if len(clens) > 1 {
+ // TODO: care? unlike http/1, it won't mess up our framing, so it's
+ // more safe smuggling-wise to ignore.
+ }
+ }
+
+ if streamEnded || isHead {
+ res.Body = noBody
+ return res, nil
+ }
+
+ cs.bufPipe = pipe{b: &dataBuffer{expected: res.ContentLength}}
+ cs.bytesRemain = res.ContentLength
+ res.Body = transportResponseBody{cs}
+ go cs.awaitRequestCancel(cs.req)
+
+ if cs.requestedGzip && res.Header.Get("Content-Encoding") == "gzip" {
+ res.Header.Del("Content-Encoding")
+ res.Header.Del("Content-Length")
+ res.ContentLength = -1
+ res.Body = &gzipReader{body: res.Body}
+ res.Uncompressed = true
+ }
+ return res, nil
+}
+
+func (rl *clientConnReadLoop) processTrailers(cs *clientStream, f *MetaHeadersFrame) error {
+ if cs.pastTrailers {
+ // Too many HEADERS frames for this stream.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ cs.pastTrailers = true
+ if !f.StreamEnded() {
+ // We expect that any headers for trailers also
+ // has END_STREAM.
+ return ConnectionError(ErrCodeProtocol)
+ }
+ if len(f.PseudoFields()) > 0 {
+ // No pseudo header fields are defined for trailers.
+ // TODO: ConnectionError might be overly harsh? Check.
+ return ConnectionError(ErrCodeProtocol)
+ }
+
+ trailer := make(http.Header)
+ for _, hf := range f.RegularFields() {
+ key := http.CanonicalHeaderKey(hf.Name)
+ trailer[key] = append(trailer[key], hf.Value)
+ }
+ cs.trailer = trailer
+
+ rl.endStream(cs)
+ return nil
+}
+
+// transportResponseBody is the concrete type of Transport.RoundTrip's
+// Response.Body. It is an io.ReadCloser. On Read, it reads from cs.body.
+// On Close it sends RST_STREAM if EOF wasn't already seen.
+type transportResponseBody struct {
+ cs *clientStream
+}
+
+func (b transportResponseBody) Read(p []byte) (n int, err error) {
+ cs := b.cs
+ cc := cs.cc
+
+ if cs.readErr != nil {
+ return 0, cs.readErr
+ }
+ n, err = b.cs.bufPipe.Read(p)
+ if cs.bytesRemain != -1 {
+ if int64(n) > cs.bytesRemain {
+ n = int(cs.bytesRemain)
+ if err == nil {
+ err = errors.New("net/http: server replied with more than declared Content-Length; truncated")
+ cc.writeStreamReset(cs.ID, ErrCodeProtocol, err)
+ }
+ cs.readErr = err
+ return int(cs.bytesRemain), err
+ }
+ cs.bytesRemain -= int64(n)
+ if err == io.EOF && cs.bytesRemain > 0 {
+ err = io.ErrUnexpectedEOF
+ cs.readErr = err
+ return n, err
+ }
+ }
+ if n == 0 {
+ // No flow control tokens to send back.
+ return
+ }
+
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+
+ var connAdd, streamAdd int32
+ // Check the conn-level first, before the stream-level.
+ if v := cc.inflow.available(); v < transportDefaultConnFlow/2 {
+ connAdd = transportDefaultConnFlow - v
+ cc.inflow.add(connAdd)
+ }
+ if err == nil { // No need to refresh if the stream is over or failed.
+ // Consider any buffered body data (read from the conn but not
+ // consumed by the client) when computing flow control for this
+ // stream.
+ v := int(cs.inflow.available()) + cs.bufPipe.Len()
+ if v < transportDefaultStreamFlow-transportDefaultStreamMinRefresh {
+ streamAdd = int32(transportDefaultStreamFlow - v)
+ cs.inflow.add(streamAdd)
+ }
+ }
+ if connAdd != 0 || streamAdd != 0 {
+ cc.wmu.Lock()
+ defer cc.wmu.Unlock()
+ if connAdd != 0 {
+ cc.fr.WriteWindowUpdate(0, mustUint31(connAdd))
+ }
+ if streamAdd != 0 {
+ cc.fr.WriteWindowUpdate(cs.ID, mustUint31(streamAdd))
+ }
+ cc.bw.Flush()
+ }
+ return
+}
+
+var errClosedResponseBody = errors.New("http2: response body closed")
+
+func (b transportResponseBody) Close() error {
+ cs := b.cs
+ cc := cs.cc
+
+ serverSentStreamEnd := cs.bufPipe.Err() == io.EOF
+ unread := cs.bufPipe.Len()
+
+ if unread > 0 || !serverSentStreamEnd {
+ cc.mu.Lock()
+ cc.wmu.Lock()
+ if !serverSentStreamEnd {
+ cc.fr.WriteRSTStream(cs.ID, ErrCodeCancel)
+ cs.didReset = true
+ }
+ // Return connection-level flow control.
+ if unread > 0 {
+ cc.inflow.add(int32(unread))
+ cc.fr.WriteWindowUpdate(0, uint32(unread))
+ }
+ cc.bw.Flush()
+ cc.wmu.Unlock()
+ cc.mu.Unlock()
+ }
+
+ cs.bufPipe.BreakWithError(errClosedResponseBody)
+ cc.forgetStreamID(cs.ID)
+ return nil
+}
+
+func (rl *clientConnReadLoop) processData(f *DataFrame) error {
+ cc := rl.cc
+ cs := cc.streamByID(f.StreamID, f.StreamEnded())
+ data := f.Data()
+ if cs == nil {
+ cc.mu.Lock()
+ neverSent := cc.nextStreamID
+ cc.mu.Unlock()
+ if f.StreamID >= neverSent {
+ // We never asked for this.
+ cc.logf("http2: Transport received unsolicited DATA frame; closing connection")
+ return ConnectionError(ErrCodeProtocol)
+ }
+ // We probably did ask for this, but canceled. Just ignore it.
+ // TODO: be stricter here? only silently ignore things which
+ // we canceled, but not things which were closed normally
+ // by the peer? Tough without accumulating too much state.
+
+ // But at least return their flow control:
+ if f.Length > 0 {
+ cc.mu.Lock()
+ cc.inflow.add(int32(f.Length))
+ cc.mu.Unlock()
+
+ cc.wmu.Lock()
+ cc.fr.WriteWindowUpdate(0, uint32(f.Length))
+ cc.bw.Flush()
+ cc.wmu.Unlock()
+ }
+ return nil
+ }
+ if !cs.firstByte {
+ cc.logf("protocol error: received DATA before a HEADERS frame")
+ rl.endStreamError(cs, StreamError{
+ StreamID: f.StreamID,
+ Code: ErrCodeProtocol,
+ })
+ return nil
+ }
+ if f.Length > 0 {
+ if cs.req.Method == "HEAD" && len(data) > 0 {
+ cc.logf("protocol error: received DATA on a HEAD request")
+ rl.endStreamError(cs, StreamError{
+ StreamID: f.StreamID,
+ Code: ErrCodeProtocol,
+ })
+ return nil
+ }
+ // Check connection-level flow control.
+ cc.mu.Lock()
+ if cs.inflow.available() >= int32(f.Length) {
+ cs.inflow.take(int32(f.Length))
+ } else {
+ cc.mu.Unlock()
+ return ConnectionError(ErrCodeFlowControl)
+ }
+ // Return any padded flow control now, since we won't
+ // refund it later on body reads.
+ var refund int
+ if pad := int(f.Length) - len(data); pad > 0 {
+ refund += pad
+ }
+ // Return len(data) now if the stream is already closed,
+ // since data will never be read.
+ didReset := cs.didReset
+ if didReset {
+ refund += len(data)
+ }
+ if refund > 0 {
+ cc.inflow.add(int32(refund))
+ cc.wmu.Lock()
+ cc.fr.WriteWindowUpdate(0, uint32(refund))
+ if !didReset {
+ cs.inflow.add(int32(refund))
+ cc.fr.WriteWindowUpdate(cs.ID, uint32(refund))
+ }
+ cc.bw.Flush()
+ cc.wmu.Unlock()
+ }
+ cc.mu.Unlock()
+
+ if len(data) > 0 && !didReset {
+ if _, err := cs.bufPipe.Write(data); err != nil {
+ rl.endStreamError(cs, err)
+ return err
+ }
+ }
+ }
+
+ if f.StreamEnded() {
+ rl.endStream(cs)
+ }
+ return nil
+}
+
+var errInvalidTrailers = errors.New("http2: invalid trailers")
+
+func (rl *clientConnReadLoop) endStream(cs *clientStream) {
+ // TODO: check that any declared content-length matches, like
+ // server.go's (*stream).endStream method.
+ rl.endStreamError(cs, nil)
+}
+
+func (rl *clientConnReadLoop) endStreamError(cs *clientStream, err error) {
+ var code func()
+ if err == nil {
+ err = io.EOF
+ code = cs.copyTrailers
+ }
+ if isConnectionCloseRequest(cs.req) {
+ rl.closeWhenIdle = true
+ }
+ cs.bufPipe.closeWithErrorAndCode(err, code)
+
+ select {
+ case cs.resc <- resAndError{err: err}:
+ default:
+ }
+}
+
+func (cs *clientStream) copyTrailers() {
+ for k, vv := range cs.trailer {
+ t := cs.resTrailer
+ if *t == nil {
+ *t = make(http.Header)
+ }
+ (*t)[k] = vv
+ }
+}
+
+func (rl *clientConnReadLoop) processGoAway(f *GoAwayFrame) error {
+ cc := rl.cc
+ cc.t.connPool().MarkDead(cc)
+ if f.ErrCode != 0 {
+ // TODO: deal with GOAWAY more. particularly the error code
+ cc.vlogf("transport got GOAWAY with error code = %v", f.ErrCode)
+ }
+ cc.setGoAway(f)
+ return nil
+}
+
+func (rl *clientConnReadLoop) processSettings(f *SettingsFrame) error {
+ cc := rl.cc
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+
+ if f.IsAck() {
+ if cc.wantSettingsAck {
+ cc.wantSettingsAck = false
+ return nil
+ }
+ return ConnectionError(ErrCodeProtocol)
+ }
+
+ err := f.ForeachSetting(func(s Setting) error {
+ switch s.ID {
+ case SettingMaxFrameSize:
+ cc.maxFrameSize = s.Val
+ case SettingMaxConcurrentStreams:
+ cc.maxConcurrentStreams = s.Val
+ case SettingMaxHeaderListSize:
+ cc.peerMaxHeaderListSize = uint64(s.Val)
+ case SettingInitialWindowSize:
+ // Values above the maximum flow-control
+ // window size of 2^31-1 MUST be treated as a
+ // connection error (Section 5.4.1) of type
+ // FLOW_CONTROL_ERROR.
+ if s.Val > math.MaxInt32 {
+ return ConnectionError(ErrCodeFlowControl)
+ }
+
+ // Adjust flow control of currently-open
+ // frames by the difference of the old initial
+ // window size and this one.
+ delta := int32(s.Val) - int32(cc.initialWindowSize)
+ for _, cs := range cc.streams {
+ cs.flow.add(delta)
+ }
+ cc.cond.Broadcast()
+
+ cc.initialWindowSize = s.Val
+ default:
+ // TODO(bradfitz): handle more settings? SETTINGS_HEADER_TABLE_SIZE probably.
+ cc.vlogf("Unhandled Setting: %v", s)
+ }
+ return nil
+ })
+ if err != nil {
+ return err
+ }
+
+ cc.wmu.Lock()
+ defer cc.wmu.Unlock()
+
+ cc.fr.WriteSettingsAck()
+ cc.bw.Flush()
+ return cc.werr
+}
+
+func (rl *clientConnReadLoop) processWindowUpdate(f *WindowUpdateFrame) error {
+ cc := rl.cc
+ cs := cc.streamByID(f.StreamID, false)
+ if f.StreamID != 0 && cs == nil {
+ return nil
+ }
+
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+
+ fl := &cc.flow
+ if cs != nil {
+ fl = &cs.flow
+ }
+ if !fl.add(int32(f.Increment)) {
+ return ConnectionError(ErrCodeFlowControl)
+ }
+ cc.cond.Broadcast()
+ return nil
+}
+
+func (rl *clientConnReadLoop) processResetStream(f *RSTStreamFrame) error {
+ cs := rl.cc.streamByID(f.StreamID, true)
+ if cs == nil {
+ // TODO: return error if server tries to RST_STEAM an idle stream
+ return nil
+ }
+ select {
+ case <-cs.peerReset:
+ // Already reset.
+ // This is the only goroutine
+ // which closes this, so there
+ // isn't a race.
+ default:
+ err := streamError(cs.ID, f.ErrCode)
+ cs.resetErr = err
+ close(cs.peerReset)
+ cs.bufPipe.CloseWithError(err)
+ cs.cc.cond.Broadcast() // wake up checkResetOrDone via clientStream.awaitFlowControl
+ }
+ return nil
+}
+
+// Ping sends a PING frame to the server and waits for the ack.
+func (cc *ClientConn) Ping(ctx context.Context) error {
+ c := make(chan struct{})
+ // Generate a random payload
+ var p [8]byte
+ for {
+ if _, err := rand.Read(p[:]); err != nil {
+ return err
+ }
+ cc.mu.Lock()
+ // check for dup before insert
+ if _, found := cc.pings[p]; !found {
+ cc.pings[p] = c
+ cc.mu.Unlock()
+ break
+ }
+ cc.mu.Unlock()
+ }
+ cc.wmu.Lock()
+ if err := cc.fr.WritePing(false, p); err != nil {
+ cc.wmu.Unlock()
+ return err
+ }
+ if err := cc.bw.Flush(); err != nil {
+ cc.wmu.Unlock()
+ return err
+ }
+ cc.wmu.Unlock()
+ select {
+ case <-c:
+ return nil
+ case <-ctx.Done():
+ return ctx.Err()
+ case <-cc.readerDone:
+ // connection closed
+ return cc.readerErr
+ }
+}
+
+func (rl *clientConnReadLoop) processPing(f *PingFrame) error {
+ if f.IsAck() {
+ cc := rl.cc
+ cc.mu.Lock()
+ defer cc.mu.Unlock()
+ // If ack, notify listener if any
+ if c, ok := cc.pings[f.Data]; ok {
+ close(c)
+ delete(cc.pings, f.Data)
+ }
+ return nil
+ }
+ cc := rl.cc
+ cc.wmu.Lock()
+ defer cc.wmu.Unlock()
+ if err := cc.fr.WritePing(true, f.Data); err != nil {
+ return err
+ }
+ return cc.bw.Flush()
+}
+
+func (rl *clientConnReadLoop) processPushPromise(f *PushPromiseFrame) error {
+ // We told the peer we don't want them.
+ // Spec says:
+ // "PUSH_PROMISE MUST NOT be sent if the SETTINGS_ENABLE_PUSH
+ // setting of the peer endpoint is set to 0. An endpoint that
+ // has set this setting and has received acknowledgement MUST
+ // treat the receipt of a PUSH_PROMISE frame as a connection
+ // error (Section 5.4.1) of type PROTOCOL_ERROR."
+ return ConnectionError(ErrCodeProtocol)
+}
+
+func (cc *ClientConn) writeStreamReset(streamID uint32, code ErrCode, err error) {
+ // TODO: map err to more interesting error codes, once the
+ // HTTP community comes up with some. But currently for
+ // RST_STREAM there's no equivalent to GOAWAY frame's debug
+ // data, and the error codes are all pretty vague ("cancel").
+ cc.wmu.Lock()
+ cc.fr.WriteRSTStream(streamID, code)
+ cc.bw.Flush()
+ cc.wmu.Unlock()
+}
+
+var (
+ errResponseHeaderListSize = errors.New("http2: response header list larger than advertised limit")
+ errRequestHeaderListSize = errors.New("http2: request header list larger than peer's advertised limit")
+ errPseudoTrailers = errors.New("http2: invalid pseudo header in trailers")
+)
+
+func (cc *ClientConn) logf(format string, args ...interface{}) {
+ cc.t.logf(format, args...)
+}
+
+func (cc *ClientConn) vlogf(format string, args ...interface{}) {
+ cc.t.vlogf(format, args...)
+}
+
+func (t *Transport) vlogf(format string, args ...interface{}) {
+ if VerboseLogs {
+ t.logf(format, args...)
+ }
+}
+
+func (t *Transport) logf(format string, args ...interface{}) {
+ log.Printf(format, args...)
+}
+
+var noBody io.ReadCloser = ioutil.NopCloser(bytes.NewReader(nil))
+
+func strSliceContains(ss []string, s string) bool {
+ for _, v := range ss {
+ if v == s {
+ return true
+ }
+ }
+ return false
+}
+
+type erringRoundTripper struct{ err error }
+
+func (rt erringRoundTripper) RoundTrip(*http.Request) (*http.Response, error) { return nil, rt.err }
+
+// gzipReader wraps a response body so it can lazily
+// call gzip.NewReader on the first call to Read
+type gzipReader struct {
+ body io.ReadCloser // underlying Response.Body
+ zr *gzip.Reader // lazily-initialized gzip reader
+ zerr error // sticky error
+}
+
+func (gz *gzipReader) Read(p []byte) (n int, err error) {
+ if gz.zerr != nil {
+ return 0, gz.zerr
+ }
+ if gz.zr == nil {
+ gz.zr, err = gzip.NewReader(gz.body)
+ if err != nil {
+ gz.zerr = err
+ return 0, err
+ }
+ }
+ return gz.zr.Read(p)
+}
+
+func (gz *gzipReader) Close() error {
+ return gz.body.Close()
+}
+
+type errorReader struct{ err error }
+
+func (r errorReader) Read(p []byte) (int, error) { return 0, r.err }
+
+// bodyWriterState encapsulates various state around the Transport's writing
+// of the request body, particularly regarding doing delayed writes of the body
+// when the request contains "Expect: 100-continue".
+type bodyWriterState struct {
+ cs *clientStream
+ timer *time.Timer // if non-nil, we're doing a delayed write
+ fnonce *sync.Once // to call fn with
+ fn func() // the code to run in the goroutine, writing the body
+ resc chan error // result of fn's execution
+ delay time.Duration // how long we should delay a delayed write for
+}
+
+func (t *Transport) getBodyWriterState(cs *clientStream, body io.Reader) (s bodyWriterState) {
+ s.cs = cs
+ if body == nil {
+ return
+ }
+ resc := make(chan error, 1)
+ s.resc = resc
+ s.fn = func() {
+ cs.cc.mu.Lock()
+ cs.startedWrite = true
+ cs.cc.mu.Unlock()
+ resc <- cs.writeRequestBody(body, cs.req.Body)
+ }
+ s.delay = t.expectContinueTimeout()
+ if s.delay == 0 ||
+ !httpguts.HeaderValuesContainsToken(
+ cs.req.Header["Expect"],
+ "100-continue") {
+ return
+ }
+ s.fnonce = new(sync.Once)
+
+ // Arm the timer with a very large duration, which we'll
+ // intentionally lower later. It has to be large now because
+ // we need a handle to it before writing the headers, but the
+ // s.delay value is defined to not start until after the
+ // request headers were written.
+ const hugeDuration = 365 * 24 * time.Hour
+ s.timer = time.AfterFunc(hugeDuration, func() {
+ s.fnonce.Do(s.fn)
+ })
+ return
+}
+
+func (s bodyWriterState) cancel() {
+ if s.timer != nil {
+ s.timer.Stop()
+ }
+}
+
+func (s bodyWriterState) on100() {
+ if s.timer == nil {
+ // If we didn't do a delayed write, ignore the server's
+ // bogus 100 continue response.
+ return
+ }
+ s.timer.Stop()
+ go func() { s.fnonce.Do(s.fn) }()
+}
+
+// scheduleBodyWrite starts writing the body, either immediately (in
+// the common case) or after the delay timeout. It should not be
+// called until after the headers have been written.
+func (s bodyWriterState) scheduleBodyWrite() {
+ if s.timer == nil {
+ // We're not doing a delayed write (see
+ // getBodyWriterState), so just start the writing
+ // goroutine immediately.
+ go s.fn()
+ return
+ }
+ traceWait100Continue(s.cs.trace)
+ if s.timer.Stop() {
+ s.timer.Reset(s.delay)
+ }
+}
+
+// isConnectionCloseRequest reports whether req should use its own
+// connection for a single request and then close the connection.
+func isConnectionCloseRequest(req *http.Request) bool {
+ return req.Close || httpguts.HeaderValuesContainsToken(req.Header["Connection"], "close")
+}
+
+// registerHTTPSProtocol calls Transport.RegisterProtocol but
+// converting panics into errors.
+func registerHTTPSProtocol(t *http.Transport, rt noDialH2RoundTripper) (err error) {
+ defer func() {
+ if e := recover(); e != nil {
+ err = fmt.Errorf("%v", e)
+ }
+ }()
+ t.RegisterProtocol("https", rt)
+ return nil
+}
+
+// noDialH2RoundTripper is a RoundTripper which only tries to complete the request
+// if there's already has a cached connection to the host.
+// (The field is exported so it can be accessed via reflect from net/http; tested
+// by TestNoDialH2RoundTripperType)
+type noDialH2RoundTripper struct{ *Transport }
+
+func (rt noDialH2RoundTripper) RoundTrip(req *http.Request) (*http.Response, error) {
+ res, err := rt.Transport.RoundTrip(req)
+ if isNoCachedConnError(err) {
+ return nil, http.ErrSkipAltProtocol
+ }
+ return res, err
+}
+
+func (t *Transport) idleConnTimeout() time.Duration {
+ if t.t1 != nil {
+ return t.t1.IdleConnTimeout
+ }
+ return 0
+}
+
+func traceGetConn(req *http.Request, hostPort string) {
+ trace := httptrace.ContextClientTrace(req.Context())
+ if trace == nil || trace.GetConn == nil {
+ return
+ }
+ trace.GetConn(hostPort)
+}
+
+func traceGotConn(req *http.Request, cc *ClientConn) {
+ trace := httptrace.ContextClientTrace(req.Context())
+ if trace == nil || trace.GotConn == nil {
+ return
+ }
+ ci := httptrace.GotConnInfo{Conn: cc.tconn}
+ cc.mu.Lock()
+ ci.Reused = cc.nextStreamID > 1
+ ci.WasIdle = len(cc.streams) == 0 && ci.Reused
+ if ci.WasIdle && !cc.lastActive.IsZero() {
+ ci.IdleTime = time.Now().Sub(cc.lastActive)
+ }
+ cc.mu.Unlock()
+
+ trace.GotConn(ci)
+}
+
+func traceWroteHeaders(trace *httptrace.ClientTrace) {
+ if trace != nil && trace.WroteHeaders != nil {
+ trace.WroteHeaders()
+ }
+}
+
+func traceGot100Continue(trace *httptrace.ClientTrace) {
+ if trace != nil && trace.Got100Continue != nil {
+ trace.Got100Continue()
+ }
+}
+
+func traceWait100Continue(trace *httptrace.ClientTrace) {
+ if trace != nil && trace.Wait100Continue != nil {
+ trace.Wait100Continue()
+ }
+}
+
+func traceWroteRequest(trace *httptrace.ClientTrace, err error) {
+ if trace != nil && trace.WroteRequest != nil {
+ trace.WroteRequest(httptrace.WroteRequestInfo{Err: err})
+ }
+}
+
+func traceFirstResponseByte(trace *httptrace.ClientTrace) {
+ if trace != nil && trace.GotFirstResponseByte != nil {
+ trace.GotFirstResponseByte()
+ }
+}
diff --git a/vendor/golang.org/x/net/http2/write.go b/vendor/golang.org/x/net/http2/write.go
new file mode 100644
index 0000000..3849bc2
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/write.go
@@ -0,0 +1,365 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "bytes"
+ "fmt"
+ "log"
+ "net/http"
+ "net/url"
+
+ "golang.org/x/net/http/httpguts"
+ "golang.org/x/net/http2/hpack"
+)
+
+// writeFramer is implemented by any type that is used to write frames.
+type writeFramer interface {
+ writeFrame(writeContext) error
+
+ // staysWithinBuffer reports whether this writer promises that
+ // it will only write less than or equal to size bytes, and it
+ // won't Flush the write context.
+ staysWithinBuffer(size int) bool
+}
+
+// writeContext is the interface needed by the various frame writer
+// types below. All the writeFrame methods below are scheduled via the
+// frame writing scheduler (see writeScheduler in writesched.go).
+//
+// This interface is implemented by *serverConn.
+//
+// TODO: decide whether to a) use this in the client code (which didn't
+// end up using this yet, because it has a simpler design, not
+// currently implementing priorities), or b) delete this and
+// make the server code a bit more concrete.
+type writeContext interface {
+ Framer() *Framer
+ Flush() error
+ CloseConn() error
+ // HeaderEncoder returns an HPACK encoder that writes to the
+ // returned buffer.
+ HeaderEncoder() (*hpack.Encoder, *bytes.Buffer)
+}
+
+// writeEndsStream reports whether w writes a frame that will transition
+// the stream to a half-closed local state. This returns false for RST_STREAM,
+// which closes the entire stream (not just the local half).
+func writeEndsStream(w writeFramer) bool {
+ switch v := w.(type) {
+ case *writeData:
+ return v.endStream
+ case *writeResHeaders:
+ return v.endStream
+ case nil:
+ // This can only happen if the caller reuses w after it's
+ // been intentionally nil'ed out to prevent use. Keep this
+ // here to catch future refactoring breaking it.
+ panic("writeEndsStream called on nil writeFramer")
+ }
+ return false
+}
+
+type flushFrameWriter struct{}
+
+func (flushFrameWriter) writeFrame(ctx writeContext) error {
+ return ctx.Flush()
+}
+
+func (flushFrameWriter) staysWithinBuffer(max int) bool { return false }
+
+type writeSettings []Setting
+
+func (s writeSettings) staysWithinBuffer(max int) bool {
+ const settingSize = 6 // uint16 + uint32
+ return frameHeaderLen+settingSize*len(s) <= max
+
+}
+
+func (s writeSettings) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WriteSettings([]Setting(s)...)
+}
+
+type writeGoAway struct {
+ maxStreamID uint32
+ code ErrCode
+}
+
+func (p *writeGoAway) writeFrame(ctx writeContext) error {
+ err := ctx.Framer().WriteGoAway(p.maxStreamID, p.code, nil)
+ ctx.Flush() // ignore error: we're hanging up on them anyway
+ return err
+}
+
+func (*writeGoAway) staysWithinBuffer(max int) bool { return false } // flushes
+
+type writeData struct {
+ streamID uint32
+ p []byte
+ endStream bool
+}
+
+func (w *writeData) String() string {
+ return fmt.Sprintf("writeData(stream=%d, p=%d, endStream=%v)", w.streamID, len(w.p), w.endStream)
+}
+
+func (w *writeData) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WriteData(w.streamID, w.endStream, w.p)
+}
+
+func (w *writeData) staysWithinBuffer(max int) bool {
+ return frameHeaderLen+len(w.p) <= max
+}
+
+// handlerPanicRST is the message sent from handler goroutines when
+// the handler panics.
+type handlerPanicRST struct {
+ StreamID uint32
+}
+
+func (hp handlerPanicRST) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WriteRSTStream(hp.StreamID, ErrCodeInternal)
+}
+
+func (hp handlerPanicRST) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+func (se StreamError) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WriteRSTStream(se.StreamID, se.Code)
+}
+
+func (se StreamError) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+type writePingAck struct{ pf *PingFrame }
+
+func (w writePingAck) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WritePing(true, w.pf.Data)
+}
+
+func (w writePingAck) staysWithinBuffer(max int) bool { return frameHeaderLen+len(w.pf.Data) <= max }
+
+type writeSettingsAck struct{}
+
+func (writeSettingsAck) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WriteSettingsAck()
+}
+
+func (writeSettingsAck) staysWithinBuffer(max int) bool { return frameHeaderLen <= max }
+
+// splitHeaderBlock splits headerBlock into fragments so that each fragment fits
+// in a single frame, then calls fn for each fragment. firstFrag/lastFrag are true
+// for the first/last fragment, respectively.
+func splitHeaderBlock(ctx writeContext, headerBlock []byte, fn func(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error) error {
+ // For now we're lazy and just pick the minimum MAX_FRAME_SIZE
+ // that all peers must support (16KB). Later we could care
+ // more and send larger frames if the peer advertised it, but
+ // there's little point. Most headers are small anyway (so we
+ // generally won't have CONTINUATION frames), and extra frames
+ // only waste 9 bytes anyway.
+ const maxFrameSize = 16384
+
+ first := true
+ for len(headerBlock) > 0 {
+ frag := headerBlock
+ if len(frag) > maxFrameSize {
+ frag = frag[:maxFrameSize]
+ }
+ headerBlock = headerBlock[len(frag):]
+ if err := fn(ctx, frag, first, len(headerBlock) == 0); err != nil {
+ return err
+ }
+ first = false
+ }
+ return nil
+}
+
+// writeResHeaders is a request to write a HEADERS and 0+ CONTINUATION frames
+// for HTTP response headers or trailers from a server handler.
+type writeResHeaders struct {
+ streamID uint32
+ httpResCode int // 0 means no ":status" line
+ h http.Header // may be nil
+ trailers []string // if non-nil, which keys of h to write. nil means all.
+ endStream bool
+
+ date string
+ contentType string
+ contentLength string
+}
+
+func encKV(enc *hpack.Encoder, k, v string) {
+ if VerboseLogs {
+ log.Printf("http2: server encoding header %q = %q", k, v)
+ }
+ enc.WriteField(hpack.HeaderField{Name: k, Value: v})
+}
+
+func (w *writeResHeaders) staysWithinBuffer(max int) bool {
+ // TODO: this is a common one. It'd be nice to return true
+ // here and get into the fast path if we could be clever and
+ // calculate the size fast enough, or at least a conservative
+ // upper bound that usually fires. (Maybe if w.h and
+ // w.trailers are nil, so we don't need to enumerate it.)
+ // Otherwise I'm afraid that just calculating the length to
+ // answer this question would be slower than the ~2µs benefit.
+ return false
+}
+
+func (w *writeResHeaders) writeFrame(ctx writeContext) error {
+ enc, buf := ctx.HeaderEncoder()
+ buf.Reset()
+
+ if w.httpResCode != 0 {
+ encKV(enc, ":status", httpCodeString(w.httpResCode))
+ }
+
+ encodeHeaders(enc, w.h, w.trailers)
+
+ if w.contentType != "" {
+ encKV(enc, "content-type", w.contentType)
+ }
+ if w.contentLength != "" {
+ encKV(enc, "content-length", w.contentLength)
+ }
+ if w.date != "" {
+ encKV(enc, "date", w.date)
+ }
+
+ headerBlock := buf.Bytes()
+ if len(headerBlock) == 0 && w.trailers == nil {
+ panic("unexpected empty hpack")
+ }
+
+ return splitHeaderBlock(ctx, headerBlock, w.writeHeaderBlock)
+}
+
+func (w *writeResHeaders) writeHeaderBlock(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error {
+ if firstFrag {
+ return ctx.Framer().WriteHeaders(HeadersFrameParam{
+ StreamID: w.streamID,
+ BlockFragment: frag,
+ EndStream: w.endStream,
+ EndHeaders: lastFrag,
+ })
+ } else {
+ return ctx.Framer().WriteContinuation(w.streamID, lastFrag, frag)
+ }
+}
+
+// writePushPromise is a request to write a PUSH_PROMISE and 0+ CONTINUATION frames.
+type writePushPromise struct {
+ streamID uint32 // pusher stream
+ method string // for :method
+ url *url.URL // for :scheme, :authority, :path
+ h http.Header
+
+ // Creates an ID for a pushed stream. This runs on serveG just before
+ // the frame is written. The returned ID is copied to promisedID.
+ allocatePromisedID func() (uint32, error)
+ promisedID uint32
+}
+
+func (w *writePushPromise) staysWithinBuffer(max int) bool {
+ // TODO: see writeResHeaders.staysWithinBuffer
+ return false
+}
+
+func (w *writePushPromise) writeFrame(ctx writeContext) error {
+ enc, buf := ctx.HeaderEncoder()
+ buf.Reset()
+
+ encKV(enc, ":method", w.method)
+ encKV(enc, ":scheme", w.url.Scheme)
+ encKV(enc, ":authority", w.url.Host)
+ encKV(enc, ":path", w.url.RequestURI())
+ encodeHeaders(enc, w.h, nil)
+
+ headerBlock := buf.Bytes()
+ if len(headerBlock) == 0 {
+ panic("unexpected empty hpack")
+ }
+
+ return splitHeaderBlock(ctx, headerBlock, w.writeHeaderBlock)
+}
+
+func (w *writePushPromise) writeHeaderBlock(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error {
+ if firstFrag {
+ return ctx.Framer().WritePushPromise(PushPromiseParam{
+ StreamID: w.streamID,
+ PromiseID: w.promisedID,
+ BlockFragment: frag,
+ EndHeaders: lastFrag,
+ })
+ } else {
+ return ctx.Framer().WriteContinuation(w.streamID, lastFrag, frag)
+ }
+}
+
+type write100ContinueHeadersFrame struct {
+ streamID uint32
+}
+
+func (w write100ContinueHeadersFrame) writeFrame(ctx writeContext) error {
+ enc, buf := ctx.HeaderEncoder()
+ buf.Reset()
+ encKV(enc, ":status", "100")
+ return ctx.Framer().WriteHeaders(HeadersFrameParam{
+ StreamID: w.streamID,
+ BlockFragment: buf.Bytes(),
+ EndStream: false,
+ EndHeaders: true,
+ })
+}
+
+func (w write100ContinueHeadersFrame) staysWithinBuffer(max int) bool {
+ // Sloppy but conservative:
+ return 9+2*(len(":status")+len("100")) <= max
+}
+
+type writeWindowUpdate struct {
+ streamID uint32 // or 0 for conn-level
+ n uint32
+}
+
+func (wu writeWindowUpdate) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+func (wu writeWindowUpdate) writeFrame(ctx writeContext) error {
+ return ctx.Framer().WriteWindowUpdate(wu.streamID, wu.n)
+}
+
+// encodeHeaders encodes an http.Header. If keys is not nil, then (k, h[k])
+// is encoded only if k is in keys.
+func encodeHeaders(enc *hpack.Encoder, h http.Header, keys []string) {
+ if keys == nil {
+ sorter := sorterPool.Get().(*sorter)
+ // Using defer here, since the returned keys from the
+ // sorter.Keys method is only valid until the sorter
+ // is returned:
+ defer sorterPool.Put(sorter)
+ keys = sorter.Keys(h)
+ }
+ for _, k := range keys {
+ vv := h[k]
+ k = lowerHeader(k)
+ if !validWireHeaderFieldName(k) {
+ // Skip it as backup paranoia. Per
+ // golang.org/issue/14048, these should
+ // already be rejected at a higher level.
+ continue
+ }
+ isTE := k == "transfer-encoding"
+ for _, v := range vv {
+ if !httpguts.ValidHeaderFieldValue(v) {
+ // TODO: return an error? golang.org/issue/14048
+ // For now just omit it.
+ continue
+ }
+ // TODO: more of "8.1.2.2 Connection-Specific Header Fields"
+ if isTE && v != "trailers" {
+ continue
+ }
+ encKV(enc, k, v)
+ }
+ }
+}
diff --git a/vendor/golang.org/x/net/http2/writesched.go b/vendor/golang.org/x/net/http2/writesched.go
new file mode 100644
index 0000000..4fe3073
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched.go
@@ -0,0 +1,242 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import "fmt"
+
+// WriteScheduler is the interface implemented by HTTP/2 write schedulers.
+// Methods are never called concurrently.
+type WriteScheduler interface {
+ // OpenStream opens a new stream in the write scheduler.
+ // It is illegal to call this with streamID=0 or with a streamID that is
+ // already open -- the call may panic.
+ OpenStream(streamID uint32, options OpenStreamOptions)
+
+ // CloseStream closes a stream in the write scheduler. Any frames queued on
+ // this stream should be discarded. It is illegal to call this on a stream
+ // that is not open -- the call may panic.
+ CloseStream(streamID uint32)
+
+ // AdjustStream adjusts the priority of the given stream. This may be called
+ // on a stream that has not yet been opened or has been closed. Note that
+ // RFC 7540 allows PRIORITY frames to be sent on streams in any state. See:
+ // https://tools.ietf.org/html/rfc7540#section-5.1
+ AdjustStream(streamID uint32, priority PriorityParam)
+
+ // Push queues a frame in the scheduler. In most cases, this will not be
+ // called with wr.StreamID()!=0 unless that stream is currently open. The one
+ // exception is RST_STREAM frames, which may be sent on idle or closed streams.
+ Push(wr FrameWriteRequest)
+
+ // Pop dequeues the next frame to write. Returns false if no frames can
+ // be written. Frames with a given wr.StreamID() are Pop'd in the same
+ // order they are Push'd.
+ Pop() (wr FrameWriteRequest, ok bool)
+}
+
+// OpenStreamOptions specifies extra options for WriteScheduler.OpenStream.
+type OpenStreamOptions struct {
+ // PusherID is zero if the stream was initiated by the client. Otherwise,
+ // PusherID names the stream that pushed the newly opened stream.
+ PusherID uint32
+}
+
+// FrameWriteRequest is a request to write a frame.
+type FrameWriteRequest struct {
+ // write is the interface value that does the writing, once the
+ // WriteScheduler has selected this frame to write. The write
+ // functions are all defined in write.go.
+ write writeFramer
+
+ // stream is the stream on which this frame will be written.
+ // nil for non-stream frames like PING and SETTINGS.
+ stream *stream
+
+ // done, if non-nil, must be a buffered channel with space for
+ // 1 message and is sent the return value from write (or an
+ // earlier error) when the frame has been written.
+ done chan error
+}
+
+// StreamID returns the id of the stream this frame will be written to.
+// 0 is used for non-stream frames such as PING and SETTINGS.
+func (wr FrameWriteRequest) StreamID() uint32 {
+ if wr.stream == nil {
+ if se, ok := wr.write.(StreamError); ok {
+ // (*serverConn).resetStream doesn't set
+ // stream because it doesn't necessarily have
+ // one. So special case this type of write
+ // message.
+ return se.StreamID
+ }
+ return 0
+ }
+ return wr.stream.id
+}
+
+// DataSize returns the number of flow control bytes that must be consumed
+// to write this entire frame. This is 0 for non-DATA frames.
+func (wr FrameWriteRequest) DataSize() int {
+ if wd, ok := wr.write.(*writeData); ok {
+ return len(wd.p)
+ }
+ return 0
+}
+
+// Consume consumes min(n, available) bytes from this frame, where available
+// is the number of flow control bytes available on the stream. Consume returns
+// 0, 1, or 2 frames, where the integer return value gives the number of frames
+// returned.
+//
+// If flow control prevents consuming any bytes, this returns (_, _, 0). If
+// the entire frame was consumed, this returns (wr, _, 1). Otherwise, this
+// returns (consumed, rest, 2), where 'consumed' contains the consumed bytes and
+// 'rest' contains the remaining bytes. The consumed bytes are deducted from the
+// underlying stream's flow control budget.
+func (wr FrameWriteRequest) Consume(n int32) (FrameWriteRequest, FrameWriteRequest, int) {
+ var empty FrameWriteRequest
+
+ // Non-DATA frames are always consumed whole.
+ wd, ok := wr.write.(*writeData)
+ if !ok || len(wd.p) == 0 {
+ return wr, empty, 1
+ }
+
+ // Might need to split after applying limits.
+ allowed := wr.stream.flow.available()
+ if n < allowed {
+ allowed = n
+ }
+ if wr.stream.sc.maxFrameSize < allowed {
+ allowed = wr.stream.sc.maxFrameSize
+ }
+ if allowed <= 0 {
+ return empty, empty, 0
+ }
+ if len(wd.p) > int(allowed) {
+ wr.stream.flow.take(allowed)
+ consumed := FrameWriteRequest{
+ stream: wr.stream,
+ write: &writeData{
+ streamID: wd.streamID,
+ p: wd.p[:allowed],
+ // Even if the original had endStream set, there
+ // are bytes remaining because len(wd.p) > allowed,
+ // so we know endStream is false.
+ endStream: false,
+ },
+ // Our caller is blocking on the final DATA frame, not
+ // this intermediate frame, so no need to wait.
+ done: nil,
+ }
+ rest := FrameWriteRequest{
+ stream: wr.stream,
+ write: &writeData{
+ streamID: wd.streamID,
+ p: wd.p[allowed:],
+ endStream: wd.endStream,
+ },
+ done: wr.done,
+ }
+ return consumed, rest, 2
+ }
+
+ // The frame is consumed whole.
+ // NB: This cast cannot overflow because allowed is <= math.MaxInt32.
+ wr.stream.flow.take(int32(len(wd.p)))
+ return wr, empty, 1
+}
+
+// String is for debugging only.
+func (wr FrameWriteRequest) String() string {
+ var des string
+ if s, ok := wr.write.(fmt.Stringer); ok {
+ des = s.String()
+ } else {
+ des = fmt.Sprintf("%T", wr.write)
+ }
+ return fmt.Sprintf("[FrameWriteRequest stream=%d, ch=%v, writer=%v]", wr.StreamID(), wr.done != nil, des)
+}
+
+// replyToWriter sends err to wr.done and panics if the send must block
+// This does nothing if wr.done is nil.
+func (wr *FrameWriteRequest) replyToWriter(err error) {
+ if wr.done == nil {
+ return
+ }
+ select {
+ case wr.done <- err:
+ default:
+ panic(fmt.Sprintf("unbuffered done channel passed in for type %T", wr.write))
+ }
+ wr.write = nil // prevent use (assume it's tainted after wr.done send)
+}
+
+// writeQueue is used by implementations of WriteScheduler.
+type writeQueue struct {
+ s []FrameWriteRequest
+}
+
+func (q *writeQueue) empty() bool { return len(q.s) == 0 }
+
+func (q *writeQueue) push(wr FrameWriteRequest) {
+ q.s = append(q.s, wr)
+}
+
+func (q *writeQueue) shift() FrameWriteRequest {
+ if len(q.s) == 0 {
+ panic("invalid use of queue")
+ }
+ wr := q.s[0]
+ // TODO: less copy-happy queue.
+ copy(q.s, q.s[1:])
+ q.s[len(q.s)-1] = FrameWriteRequest{}
+ q.s = q.s[:len(q.s)-1]
+ return wr
+}
+
+// consume consumes up to n bytes from q.s[0]. If the frame is
+// entirely consumed, it is removed from the queue. If the frame
+// is partially consumed, the frame is kept with the consumed
+// bytes removed. Returns true iff any bytes were consumed.
+func (q *writeQueue) consume(n int32) (FrameWriteRequest, bool) {
+ if len(q.s) == 0 {
+ return FrameWriteRequest{}, false
+ }
+ consumed, rest, numresult := q.s[0].Consume(n)
+ switch numresult {
+ case 0:
+ return FrameWriteRequest{}, false
+ case 1:
+ q.shift()
+ case 2:
+ q.s[0] = rest
+ }
+ return consumed, true
+}
+
+type writeQueuePool []*writeQueue
+
+// put inserts an unused writeQueue into the pool.
+func (p *writeQueuePool) put(q *writeQueue) {
+ for i := range q.s {
+ q.s[i] = FrameWriteRequest{}
+ }
+ q.s = q.s[:0]
+ *p = append(*p, q)
+}
+
+// get returns an empty writeQueue.
+func (p *writeQueuePool) get() *writeQueue {
+ ln := len(*p)
+ if ln == 0 {
+ return new(writeQueue)
+ }
+ x := ln - 1
+ q := (*p)[x]
+ (*p)[x] = nil
+ *p = (*p)[:x]
+ return q
+}
diff --git a/vendor/golang.org/x/net/http2/writesched_priority.go b/vendor/golang.org/x/net/http2/writesched_priority.go
new file mode 100644
index 0000000..848fed6
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched_priority.go
@@ -0,0 +1,452 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+ "fmt"
+ "math"
+ "sort"
+)
+
+// RFC 7540, Section 5.3.5: the default weight is 16.
+const priorityDefaultWeight = 15 // 16 = 15 + 1
+
+// PriorityWriteSchedulerConfig configures a priorityWriteScheduler.
+type PriorityWriteSchedulerConfig struct {
+ // MaxClosedNodesInTree controls the maximum number of closed streams to
+ // retain in the priority tree. Setting this to zero saves a small amount
+ // of memory at the cost of performance.
+ //
+ // See RFC 7540, Section 5.3.4:
+ // "It is possible for a stream to become closed while prioritization
+ // information ... is in transit. ... This potentially creates suboptimal
+ // prioritization, since the stream could be given a priority that is
+ // different from what is intended. To avoid these problems, an endpoint
+ // SHOULD retain stream prioritization state for a period after streams
+ // become closed. The longer state is retained, the lower the chance that
+ // streams are assigned incorrect or default priority values."
+ MaxClosedNodesInTree int
+
+ // MaxIdleNodesInTree controls the maximum number of idle streams to
+ // retain in the priority tree. Setting this to zero saves a small amount
+ // of memory at the cost of performance.
+ //
+ // See RFC 7540, Section 5.3.4:
+ // Similarly, streams that are in the "idle" state can be assigned
+ // priority or become a parent of other streams. This allows for the
+ // creation of a grouping node in the dependency tree, which enables
+ // more flexible expressions of priority. Idle streams begin with a
+ // default priority (Section 5.3.5).
+ MaxIdleNodesInTree int
+
+ // ThrottleOutOfOrderWrites enables write throttling to help ensure that
+ // data is delivered in priority order. This works around a race where
+ // stream B depends on stream A and both streams are about to call Write
+ // to queue DATA frames. If B wins the race, a naive scheduler would eagerly
+ // write as much data from B as possible, but this is suboptimal because A
+ // is a higher-priority stream. With throttling enabled, we write a small
+ // amount of data from B to minimize the amount of bandwidth that B can
+ // steal from A.
+ ThrottleOutOfOrderWrites bool
+}
+
+// NewPriorityWriteScheduler constructs a WriteScheduler that schedules
+// frames by following HTTP/2 priorities as described in RFC 7540 Section 5.3.
+// If cfg is nil, default options are used.
+func NewPriorityWriteScheduler(cfg *PriorityWriteSchedulerConfig) WriteScheduler {
+ if cfg == nil {
+ // For justification of these defaults, see:
+ // https://docs.google.com/document/d/1oLhNg1skaWD4_DtaoCxdSRN5erEXrH-KnLrMwEpOtFY
+ cfg = &PriorityWriteSchedulerConfig{
+ MaxClosedNodesInTree: 10,
+ MaxIdleNodesInTree: 10,
+ ThrottleOutOfOrderWrites: false,
+ }
+ }
+
+ ws := &priorityWriteScheduler{
+ nodes: make(map[uint32]*priorityNode),
+ maxClosedNodesInTree: cfg.MaxClosedNodesInTree,
+ maxIdleNodesInTree: cfg.MaxIdleNodesInTree,
+ enableWriteThrottle: cfg.ThrottleOutOfOrderWrites,
+ }
+ ws.nodes[0] = &ws.root
+ if cfg.ThrottleOutOfOrderWrites {
+ ws.writeThrottleLimit = 1024
+ } else {
+ ws.writeThrottleLimit = math.MaxInt32
+ }
+ return ws
+}
+
+type priorityNodeState int
+
+const (
+ priorityNodeOpen priorityNodeState = iota
+ priorityNodeClosed
+ priorityNodeIdle
+)
+
+// priorityNode is a node in an HTTP/2 priority tree.
+// Each node is associated with a single stream ID.
+// See RFC 7540, Section 5.3.
+type priorityNode struct {
+ q writeQueue // queue of pending frames to write
+ id uint32 // id of the stream, or 0 for the root of the tree
+ weight uint8 // the actual weight is weight+1, so the value is in [1,256]
+ state priorityNodeState // open | closed | idle
+ bytes int64 // number of bytes written by this node, or 0 if closed
+ subtreeBytes int64 // sum(node.bytes) of all nodes in this subtree
+
+ // These links form the priority tree.
+ parent *priorityNode
+ kids *priorityNode // start of the kids list
+ prev, next *priorityNode // doubly-linked list of siblings
+}
+
+func (n *priorityNode) setParent(parent *priorityNode) {
+ if n == parent {
+ panic("setParent to self")
+ }
+ if n.parent == parent {
+ return
+ }
+ // Unlink from current parent.
+ if parent := n.parent; parent != nil {
+ if n.prev == nil {
+ parent.kids = n.next
+ } else {
+ n.prev.next = n.next
+ }
+ if n.next != nil {
+ n.next.prev = n.prev
+ }
+ }
+ // Link to new parent.
+ // If parent=nil, remove n from the tree.
+ // Always insert at the head of parent.kids (this is assumed by walkReadyInOrder).
+ n.parent = parent
+ if parent == nil {
+ n.next = nil
+ n.prev = nil
+ } else {
+ n.next = parent.kids
+ n.prev = nil
+ if n.next != nil {
+ n.next.prev = n
+ }
+ parent.kids = n
+ }
+}
+
+func (n *priorityNode) addBytes(b int64) {
+ n.bytes += b
+ for ; n != nil; n = n.parent {
+ n.subtreeBytes += b
+ }
+}
+
+// walkReadyInOrder iterates over the tree in priority order, calling f for each node
+// with a non-empty write queue. When f returns true, this funcion returns true and the
+// walk halts. tmp is used as scratch space for sorting.
+//
+// f(n, openParent) takes two arguments: the node to visit, n, and a bool that is true
+// if any ancestor p of n is still open (ignoring the root node).
+func (n *priorityNode) walkReadyInOrder(openParent bool, tmp *[]*priorityNode, f func(*priorityNode, bool) bool) bool {
+ if !n.q.empty() && f(n, openParent) {
+ return true
+ }
+ if n.kids == nil {
+ return false
+ }
+
+ // Don't consider the root "open" when updating openParent since
+ // we can't send data frames on the root stream (only control frames).
+ if n.id != 0 {
+ openParent = openParent || (n.state == priorityNodeOpen)
+ }
+
+ // Common case: only one kid or all kids have the same weight.
+ // Some clients don't use weights; other clients (like web browsers)
+ // use mostly-linear priority trees.
+ w := n.kids.weight
+ needSort := false
+ for k := n.kids.next; k != nil; k = k.next {
+ if k.weight != w {
+ needSort = true
+ break
+ }
+ }
+ if !needSort {
+ for k := n.kids; k != nil; k = k.next {
+ if k.walkReadyInOrder(openParent, tmp, f) {
+ return true
+ }
+ }
+ return false
+ }
+
+ // Uncommon case: sort the child nodes. We remove the kids from the parent,
+ // then re-insert after sorting so we can reuse tmp for future sort calls.
+ *tmp = (*tmp)[:0]
+ for n.kids != nil {
+ *tmp = append(*tmp, n.kids)
+ n.kids.setParent(nil)
+ }
+ sort.Sort(sortPriorityNodeSiblings(*tmp))
+ for i := len(*tmp) - 1; i >= 0; i-- {
+ (*tmp)[i].setParent(n) // setParent inserts at the head of n.kids
+ }
+ for k := n.kids; k != nil; k = k.next {
+ if k.walkReadyInOrder(openParent, tmp, f) {
+ return true
+ }
+ }
+ return false
+}
+
+type sortPriorityNodeSiblings []*priorityNode
+
+func (z sortPriorityNodeSiblings) Len() int { return len(z) }
+func (z sortPriorityNodeSiblings) Swap(i, k int) { z[i], z[k] = z[k], z[i] }
+func (z sortPriorityNodeSiblings) Less(i, k int) bool {
+ // Prefer the subtree that has sent fewer bytes relative to its weight.
+ // See sections 5.3.2 and 5.3.4.
+ wi, bi := float64(z[i].weight+1), float64(z[i].subtreeBytes)
+ wk, bk := float64(z[k].weight+1), float64(z[k].subtreeBytes)
+ if bi == 0 && bk == 0 {
+ return wi >= wk
+ }
+ if bk == 0 {
+ return false
+ }
+ return bi/bk <= wi/wk
+}
+
+type priorityWriteScheduler struct {
+ // root is the root of the priority tree, where root.id = 0.
+ // The root queues control frames that are not associated with any stream.
+ root priorityNode
+
+ // nodes maps stream ids to priority tree nodes.
+ nodes map[uint32]*priorityNode
+
+ // maxID is the maximum stream id in nodes.
+ maxID uint32
+
+ // lists of nodes that have been closed or are idle, but are kept in
+ // the tree for improved prioritization. When the lengths exceed either
+ // maxClosedNodesInTree or maxIdleNodesInTree, old nodes are discarded.
+ closedNodes, idleNodes []*priorityNode
+
+ // From the config.
+ maxClosedNodesInTree int
+ maxIdleNodesInTree int
+ writeThrottleLimit int32
+ enableWriteThrottle bool
+
+ // tmp is scratch space for priorityNode.walkReadyInOrder to reduce allocations.
+ tmp []*priorityNode
+
+ // pool of empty queues for reuse.
+ queuePool writeQueuePool
+}
+
+func (ws *priorityWriteScheduler) OpenStream(streamID uint32, options OpenStreamOptions) {
+ // The stream may be currently idle but cannot be opened or closed.
+ if curr := ws.nodes[streamID]; curr != nil {
+ if curr.state != priorityNodeIdle {
+ panic(fmt.Sprintf("stream %d already opened", streamID))
+ }
+ curr.state = priorityNodeOpen
+ return
+ }
+
+ // RFC 7540, Section 5.3.5:
+ // "All streams are initially assigned a non-exclusive dependency on stream 0x0.
+ // Pushed streams initially depend on their associated stream. In both cases,
+ // streams are assigned a default weight of 16."
+ parent := ws.nodes[options.PusherID]
+ if parent == nil {
+ parent = &ws.root
+ }
+ n := &priorityNode{
+ q: *ws.queuePool.get(),
+ id: streamID,
+ weight: priorityDefaultWeight,
+ state: priorityNodeOpen,
+ }
+ n.setParent(parent)
+ ws.nodes[streamID] = n
+ if streamID > ws.maxID {
+ ws.maxID = streamID
+ }
+}
+
+func (ws *priorityWriteScheduler) CloseStream(streamID uint32) {
+ if streamID == 0 {
+ panic("violation of WriteScheduler interface: cannot close stream 0")
+ }
+ if ws.nodes[streamID] == nil {
+ panic(fmt.Sprintf("violation of WriteScheduler interface: unknown stream %d", streamID))
+ }
+ if ws.nodes[streamID].state != priorityNodeOpen {
+ panic(fmt.Sprintf("violation of WriteScheduler interface: stream %d already closed", streamID))
+ }
+
+ n := ws.nodes[streamID]
+ n.state = priorityNodeClosed
+ n.addBytes(-n.bytes)
+
+ q := n.q
+ ws.queuePool.put(&q)
+ n.q.s = nil
+ if ws.maxClosedNodesInTree > 0 {
+ ws.addClosedOrIdleNode(&ws.closedNodes, ws.maxClosedNodesInTree, n)
+ } else {
+ ws.removeNode(n)
+ }
+}
+
+func (ws *priorityWriteScheduler) AdjustStream(streamID uint32, priority PriorityParam) {
+ if streamID == 0 {
+ panic("adjustPriority on root")
+ }
+
+ // If streamID does not exist, there are two cases:
+ // - A closed stream that has been removed (this will have ID <= maxID)
+ // - An idle stream that is being used for "grouping" (this will have ID > maxID)
+ n := ws.nodes[streamID]
+ if n == nil {
+ if streamID <= ws.maxID || ws.maxIdleNodesInTree == 0 {
+ return
+ }
+ ws.maxID = streamID
+ n = &priorityNode{
+ q: *ws.queuePool.get(),
+ id: streamID,
+ weight: priorityDefaultWeight,
+ state: priorityNodeIdle,
+ }
+ n.setParent(&ws.root)
+ ws.nodes[streamID] = n
+ ws.addClosedOrIdleNode(&ws.idleNodes, ws.maxIdleNodesInTree, n)
+ }
+
+ // Section 5.3.1: A dependency on a stream that is not currently in the tree
+ // results in that stream being given a default priority (Section 5.3.5).
+ parent := ws.nodes[priority.StreamDep]
+ if parent == nil {
+ n.setParent(&ws.root)
+ n.weight = priorityDefaultWeight
+ return
+ }
+
+ // Ignore if the client tries to make a node its own parent.
+ if n == parent {
+ return
+ }
+
+ // Section 5.3.3:
+ // "If a stream is made dependent on one of its own dependencies, the
+ // formerly dependent stream is first moved to be dependent on the
+ // reprioritized stream's previous parent. The moved dependency retains
+ // its weight."
+ //
+ // That is: if parent depends on n, move parent to depend on n.parent.
+ for x := parent.parent; x != nil; x = x.parent {
+ if x == n {
+ parent.setParent(n.parent)
+ break
+ }
+ }
+
+ // Section 5.3.3: The exclusive flag causes the stream to become the sole
+ // dependency of its parent stream, causing other dependencies to become
+ // dependent on the exclusive stream.
+ if priority.Exclusive {
+ k := parent.kids
+ for k != nil {
+ next := k.next
+ if k != n {
+ k.setParent(n)
+ }
+ k = next
+ }
+ }
+
+ n.setParent(parent)
+ n.weight = priority.Weight
+}
+
+func (ws *priorityWriteScheduler) Push(wr FrameWriteRequest) {
+ var n *priorityNode
+ if id := wr.StreamID(); id == 0 {
+ n = &ws.root
+ } else {
+ n = ws.nodes[id]
+ if n == nil {
+ // id is an idle or closed stream. wr should not be a HEADERS or
+ // DATA frame. However, wr can be a RST_STREAM. In this case, we
+ // push wr onto the root, rather than creating a new priorityNode,
+ // since RST_STREAM is tiny and the stream's priority is unknown
+ // anyway. See issue #17919.
+ if wr.DataSize() > 0 {
+ panic("add DATA on non-open stream")
+ }
+ n = &ws.root
+ }
+ }
+ n.q.push(wr)
+}
+
+func (ws *priorityWriteScheduler) Pop() (wr FrameWriteRequest, ok bool) {
+ ws.root.walkReadyInOrder(false, &ws.tmp, func(n *priorityNode, openParent bool) bool {
+ limit := int32(math.MaxInt32)
+ if openParent {
+ limit = ws.writeThrottleLimit
+ }
+ wr, ok = n.q.consume(limit)
+ if !ok {
+ return false
+ }
+ n.addBytes(int64(wr.DataSize()))
+ // If B depends on A and B continuously has data available but A
+ // does not, gradually increase the throttling limit to allow B to
+ // steal more and more bandwidth from A.
+ if openParent {
+ ws.writeThrottleLimit += 1024
+ if ws.writeThrottleLimit < 0 {
+ ws.writeThrottleLimit = math.MaxInt32
+ }
+ } else if ws.enableWriteThrottle {
+ ws.writeThrottleLimit = 1024
+ }
+ return true
+ })
+ return wr, ok
+}
+
+func (ws *priorityWriteScheduler) addClosedOrIdleNode(list *[]*priorityNode, maxSize int, n *priorityNode) {
+ if maxSize == 0 {
+ return
+ }
+ if len(*list) == maxSize {
+ // Remove the oldest node, then shift left.
+ ws.removeNode((*list)[0])
+ x := (*list)[1:]
+ copy(*list, x)
+ *list = (*list)[:len(x)]
+ }
+ *list = append(*list, n)
+}
+
+func (ws *priorityWriteScheduler) removeNode(n *priorityNode) {
+ for k := n.kids; k != nil; k = k.next {
+ k.setParent(n.parent)
+ }
+ n.setParent(nil)
+ delete(ws.nodes, n.id)
+}
diff --git a/vendor/golang.org/x/net/http2/writesched_random.go b/vendor/golang.org/x/net/http2/writesched_random.go
new file mode 100644
index 0000000..36d7919
--- /dev/null
+++ b/vendor/golang.org/x/net/http2/writesched_random.go
@@ -0,0 +1,72 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import "math"
+
+// NewRandomWriteScheduler constructs a WriteScheduler that ignores HTTP/2
+// priorities. Control frames like SETTINGS and PING are written before DATA
+// frames, but if no control frames are queued and multiple streams have queued
+// HEADERS or DATA frames, Pop selects a ready stream arbitrarily.
+func NewRandomWriteScheduler() WriteScheduler {
+ return &randomWriteScheduler{sq: make(map[uint32]*writeQueue)}
+}
+
+type randomWriteScheduler struct {
+ // zero are frames not associated with a specific stream.
+ zero writeQueue
+
+ // sq contains the stream-specific queues, keyed by stream ID.
+ // When a stream is idle or closed, it's deleted from the map.
+ sq map[uint32]*writeQueue
+
+ // pool of empty queues for reuse.
+ queuePool writeQueuePool
+}
+
+func (ws *randomWriteScheduler) OpenStream(streamID uint32, options OpenStreamOptions) {
+ // no-op: idle streams are not tracked
+}
+
+func (ws *randomWriteScheduler) CloseStream(streamID uint32) {
+ q, ok := ws.sq[streamID]
+ if !ok {
+ return
+ }
+ delete(ws.sq, streamID)
+ ws.queuePool.put(q)
+}
+
+func (ws *randomWriteScheduler) AdjustStream(streamID uint32, priority PriorityParam) {
+ // no-op: priorities are ignored
+}
+
+func (ws *randomWriteScheduler) Push(wr FrameWriteRequest) {
+ id := wr.StreamID()
+ if id == 0 {
+ ws.zero.push(wr)
+ return
+ }
+ q, ok := ws.sq[id]
+ if !ok {
+ q = ws.queuePool.get()
+ ws.sq[id] = q
+ }
+ q.push(wr)
+}
+
+func (ws *randomWriteScheduler) Pop() (FrameWriteRequest, bool) {
+ // Control frames first.
+ if !ws.zero.empty() {
+ return ws.zero.shift(), true
+ }
+ // Iterate over all non-idle streams until finding one that can be consumed.
+ for _, q := range ws.sq {
+ if wr, ok := q.consume(math.MaxInt32); ok {
+ return wr, true
+ }
+ }
+ return FrameWriteRequest{}, false
+}