diff --git a/adapters/ponsim_olt/ponsim_olt.py b/adapters/ponsim_olt/ponsim_olt.py
new file mode 100644
index 0000000..5e096b4
--- /dev/null
+++ b/adapters/ponsim_olt/ponsim_olt.py
@@ -0,0 +1,755 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""
+Fully simulated OLT adapter.
+"""
+from uuid import uuid4
+
+import arrow
+import adapters.common.openflow.utils as fd
+import grpc
+import structlog
+from scapy.layers.l2 import Ether, Dot1Q
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks
+from grpc._channel import _Rendezvous
+
+from adapters.common.frameio.frameio import BpfProgramFilter, hexify
+from adapters.common.utils.asleep import asleep
+from twisted.internet.task import LoopingCall
+from adapters.iadapter import OltAdapter
+from adapters.protos import third_party
+from adapters.protos import openflow_13_pb2 as ofp
+from adapters.protos import ponsim_pb2
+from adapters.protos.common_pb2 import OperStatus, ConnectStatus, AdminState
+from adapters.protos.device_pb2 import Port, PmConfig, PmConfigs
+from adapters.protos.events_pb2 import KpiEvent, KpiEventType, MetricValuePairs
+from google.protobuf.empty_pb2 import Empty
+from adapters.protos.logical_device_pb2 import LogicalPort, LogicalDevice
+from adapters.protos.openflow_13_pb2 import OFPPS_LIVE, OFPPF_FIBER, \
+    OFPPF_1GB_FD, \
+    OFPC_GROUP_STATS, OFPC_PORT_STATS, OFPC_TABLE_STATS, OFPC_FLOW_STATS, \
+    ofp_switch_features, ofp_desc
+from adapters.protos.openflow_13_pb2 import ofp_port
+from adapters.protos.ponsim_pb2 import FlowTable, PonSimFrame
+from adapters.protos.core_adapter_pb2 import SwitchCapability, PortCapability
+from adapters.common.utils.registry import registry
+
+_ = third_party
+log = structlog.get_logger()
+
+PACKET_IN_VLAN = 4000
+is_inband_frame = BpfProgramFilter('(ether[14:2] & 0xfff) = 0x{:03x}'.format(
+    PACKET_IN_VLAN))
+
+def mac_str_to_tuple(mac):
+    return tuple(int(d, 16) for d in mac.split(':'))
+
+class AdapterPmMetrics:
+    def __init__(self, device):
+        self.pm_names = {'tx_64_pkts', 'tx_65_127_pkts', 'tx_128_255_pkts',
+                         'tx_256_511_pkts', 'tx_512_1023_pkts',
+                         'tx_1024_1518_pkts', 'tx_1519_9k_pkts',
+                         'rx_64_pkts', 'rx_65_127_pkts',
+                         'rx_128_255_pkts', 'rx_256_511_pkts',
+                         'rx_512_1023_pkts', 'rx_1024_1518_pkts',
+                         'rx_1519_9k_pkts'}
+        self.device = device
+        self.id = device.id
+        self.name = 'ponsim_olt'
+        self.default_freq = 150
+        self.grouped = False
+        self.freq_override = False
+        self.pon_metrics_config = dict()
+        self.nni_metrics_config = dict()
+        self.lc = None
+        for m in self.pm_names:
+            self.pon_metrics_config[m] = PmConfig(name=m,
+                                                  type=PmConfig.COUNTER,
+                                                  enabled=True)
+            self.nni_metrics_config[m] = PmConfig(name=m,
+                                                  type=PmConfig.COUNTER,
+                                                  enabled=True)
+
+    def update(self, pm_config):
+        if self.default_freq != pm_config.default_freq:
+            # Update the callback to the new frequency.
+            self.default_freq = pm_config.default_freq
+            self.lc.stop()
+            self.lc.start(interval=self.default_freq / 10)
+        for m in pm_config.metrics:
+            self.pon_metrics_config[m.name].enabled = m.enabled
+            self.nni_metrics_config[m.name].enabled = m.enabled
+
+    def make_proto(self):
+        pm_config = PmConfigs(
+            id=self.id,
+            default_freq=self.default_freq,
+            grouped=False,
+            freq_override=False)
+        for m in sorted(self.pon_metrics_config):
+            pm = self.pon_metrics_config[m]  # Either will do they're the same
+            pm_config.metrics.extend([PmConfig(name=pm.name,
+                                               type=pm.type,
+                                               enabled=pm.enabled)])
+        return pm_config
+
+    def collect_port_metrics(self, channel):
+        rtrn_port_metrics = dict()
+        stub = ponsim_pb2.PonSimStub(channel)
+        stats = stub.GetStats(Empty())
+        rtrn_port_metrics['pon'] = self.extract_pon_metrics(stats)
+        rtrn_port_metrics['nni'] = self.extract_nni_metrics(stats)
+        return rtrn_port_metrics
+
+    def extract_pon_metrics(self, stats):
+        rtrn_pon_metrics = dict()
+        for m in stats.metrics:
+            if m.port_name == "pon":
+                for p in m.packets:
+                    if self.pon_metrics_config[p.name].enabled:
+                        rtrn_pon_metrics[p.name] = p.value
+                return rtrn_pon_metrics
+
+    def extract_nni_metrics(self, stats):
+        rtrn_pon_metrics = dict()
+        for m in stats.metrics:
+            if m.port_name == "nni":
+                for p in m.packets:
+                    if self.pon_metrics_config[p.name].enabled:
+                        rtrn_pon_metrics[p.name] = p.value
+                return rtrn_pon_metrics
+
+    def start_collector(self, callback):
+        log.info("starting-pm-collection", device_name=self.name,
+                 device_id=self.device.id)
+        prefix = 'voltha.{}.{}'.format(self.name, self.device.id)
+        self.lc = LoopingCall(callback, self.device.id, prefix)
+        self.lc.start(interval=self.default_freq / 10)
+
+    def stop_collector(self):
+        log.info("stopping-pm-collection", device_name=self.name,
+                 device_id=self.device.id)
+        self.lc.stop()
+
+
+class AdapterAlarms:
+    def __init__(self, adapter, device):
+        self.adapter = adapter
+        self.device = device
+        self.lc = None
+
+    def send_alarm(self, context_data, alarm_data):
+        try:
+            current_context = {}
+            for key, value in context_data.__dict__.items():
+                current_context[key] = str(value)
+
+            alarm_event = self.adapter.adapter_agent.create_alarm(
+                resource_id=self.device.id,
+                description="{}.{} - {}".format(self.adapter.name,
+                                                self.device.id,
+                                                alarm_data[
+                                                    'description']) if 'description' in alarm_data else None,
+                type=alarm_data['type'] if 'type' in alarm_data else None,
+                category=alarm_data[
+                    'category'] if 'category' in alarm_data else None,
+                severity=alarm_data[
+                    'severity'] if 'severity' in alarm_data else None,
+                state=alarm_data['state'] if 'state' in alarm_data else None,
+                raised_ts=alarm_data['ts'] if 'ts' in alarm_data else 0,
+                context=current_context
+            )
+
+            self.adapter.adapter_agent.submit_alarm(self.device.id,
+                                                    alarm_event)
+
+        except Exception as e:
+            log.exception('failed-to-send-alarm', e=e)
+
+
+class PonSimOltAdapter(OltAdapter):
+    def __init__(self, adapter_agent, config):
+        super(PonSimOltAdapter, self).__init__(adapter_agent=adapter_agent,
+                                               config=config,
+                                               device_handler_class=PonSimOltHandler,
+                                               name='ponsim_olt',
+                                               vendor='Voltha project',
+                                               version='0.4',
+                                               device_type='ponsim_olt',
+                                               accepts_bulk_flow_update=True,
+                                               accepts_add_remove_flow_updates=False)
+
+    def update_pm_config(self, device, pm_config):
+        log.info("adapter-update-pm-config", device=device,
+                 pm_config=pm_config)
+        handler = self.devices_handlers[device.id]
+        handler.update_pm_config(device, pm_config)
+
+
+
+class PonSimOltHandler(object):
+    def __init__(self, adapter, device_id):
+        self.adapter = adapter
+        self.adapter_agent = adapter.adapter_agent
+        self.device_id = device_id
+        self.log = structlog.get_logger(device_id=device_id)
+        self.channel = None
+        self.io_port = None
+        self.logical_device_id = None
+        self.nni_port = None
+        self.ofp_port_no = None
+        self.interface = registry('main').get_args().interface
+        self.pm_metrics = None
+        self.alarms = None
+        self.frames = None
+
+    @inlineCallbacks
+    def get_channel(self):
+        if self.channel is None:
+            try:
+                device = yield self.adapter_agent.get_device(self.device_id)
+                self.log.info('device-info', device=device, host_port=device.host_and_port)
+                self.channel = grpc.insecure_channel(device.host_and_port)
+            except Exception as e:
+                    log.exception("ponsim-connection-failure", e=e)
+
+        # returnValue(self.channel)
+
+    def close_channel(self):
+        if self.channel is None:
+            self.log.info('grpc-channel-already-closed')
+            return
+        else:
+            if self.frames is not None:
+                self.frames.cancel()
+                self.frames = None
+                self.log.info('cancelled-grpc-frame-stream')
+
+            self.channel.unsubscribe(lambda *args: None)
+            self.channel = None
+
+            self.log.info('grpc-channel-closed')
+
+    def _get_nni_port(self):
+        ports = self.adapter_agent.get_ports(self.device_id, Port.ETHERNET_NNI)
+        if ports:
+            # For now, we use on one NNI port
+            return ports[0]
+
+    @inlineCallbacks
+    def activate(self, device):
+        try:
+            self.log.info('activating')
+
+            if not device.host_and_port:
+                device.oper_status = OperStatus.FAILED
+                device.reason = 'No host_and_port field provided'
+                self.adapter_agent.device_update(device)
+                return
+
+            yield self.get_channel()
+            stub = ponsim_pb2.PonSimStub(self.channel)
+            info = stub.GetDeviceInfo(Empty())
+            log.info('got-info', info=info, device_id=device.id)
+            self.ofp_port_no = info.nni_port
+
+            device.root = True
+            device.vendor = 'ponsim'
+            device.model = 'n/a'
+            device.serial_number = device.host_and_port
+            device.connect_status = ConnectStatus.REACHABLE
+            yield self.adapter_agent.device_update(device)
+
+            # Now set the initial PM configuration for this device
+            self.pm_metrics = AdapterPmMetrics(device)
+            pm_config = self.pm_metrics.make_proto()
+            log.info("initial-pm-config", pm_config=pm_config)
+            self.adapter_agent.device_pm_config_update(pm_config, init=True)
+
+            # Setup alarm handler
+            self.alarms = AdapterAlarms(self.adapter, device)
+
+            nni_port = Port(
+                port_no=info.nni_port,
+                label='NNI facing Ethernet port',
+                type=Port.ETHERNET_NNI,
+                admin_state=AdminState.ENABLED,
+                oper_status=OperStatus.ACTIVE
+            )
+            self.nni_port = nni_port
+            yield self.adapter_agent.port_created(device.id, nni_port)
+            yield self.adapter_agent.port_created(device.id, Port(
+                port_no=1,
+                label='PON port',
+                type=Port.PON_OLT,
+                admin_state=AdminState.ENABLED,
+                oper_status=OperStatus.ACTIVE
+            ))
+            yield self.adapter_agent.device_state_update(device.id, oper_status=OperStatus.ACTIVE)
+
+            # register ONUS
+            self.log.info('onu-found', onus=info.onus, len=len(info.onus))
+            for onu in info.onus:
+                vlan_id = onu.uni_port
+                yield self.adapter_agent.child_device_detected(
+                    parent_device_id=device.id,
+                    parent_port_no=1,
+                    child_device_type='ponsim_onu',
+                    channel_id=vlan_id,
+                )
+
+            self.log.info('starting-frame-grpc-stream')
+            reactor.callInThread(self.rcv_grpc)
+            self.log.info('started-frame-grpc-stream')
+
+            # TODO
+            # Start collecting stats from the device after a brief pause
+            # self.start_kpi_collection(device.id)
+        except Exception as e:
+            log.exception("Exception-activating", e=e)
+
+
+    def get_ofp_device_info(self, device):
+        return SwitchCapability(
+            desc=ofp_desc(
+                hw_desc='ponsim pon',
+                sw_desc='ponsim pon',
+                serial_num=device.serial_number,
+                dp_desc='n/a'
+            ),
+            switch_features=ofp_switch_features(
+                n_buffers=256,  # TODO fake for now
+                n_tables=2,  # TODO ditto
+                capabilities=(  # TODO and ditto
+                    OFPC_FLOW_STATS
+                    | OFPC_TABLE_STATS
+                    | OFPC_PORT_STATS
+                    | OFPC_GROUP_STATS
+                )
+            )
+        )
+
+    def get_ofp_port_info(self, device, port_no):
+        # Since the adapter created the device port then it has the reference of the port to
+        # return the capability.   TODO:  Do a lookup on the NNI port number and return the
+        # appropriate attributes
+        self.log.info('get_ofp_port_info', port_no=port_no, info=self.ofp_port_no, device_id=device.id)
+        cap = OFPPF_1GB_FD | OFPPF_FIBER
+        return PortCapability(
+            port = LogicalPort (
+                id='nni',
+                ofp_port=ofp_port(
+                    port_no=port_no,
+                    hw_addr=mac_str_to_tuple(
+                    '00:00:00:00:00:%02x' % self.ofp_port_no),
+                    name='nni',
+                    config=0,
+                    state=OFPPS_LIVE,
+                    curr=cap,
+                    advertised=cap,
+                    peer=cap,
+                    curr_speed=OFPPF_1GB_FD,
+                    max_speed=OFPPF_1GB_FD
+                )
+            )
+        )
+
+    def reconcile(self, device):
+        self.log.info('reconciling-OLT-device-starts')
+
+        if not device.host_and_port:
+            device.oper_status = OperStatus.FAILED
+            device.reason = 'No host_and_port field provided'
+            self.adapter_agent.device_update(device)
+            return
+
+        try:
+            stub = ponsim_pb2.PonSimStub(self.get_channel())
+            info = stub.GetDeviceInfo(Empty())
+            log.info('got-info', info=info)
+            # TODO: Verify we are connected to the same device we are
+            # reconciling - not much data in ponsim to differentiate at the
+            # time
+            device.oper_status = OperStatus.ACTIVE
+            self.adapter_agent.device_update(device)
+            self.ofp_port_no = info.nni_port
+            self.nni_port = self._get_nni_port()
+        except Exception, e:
+            log.exception('device-unreachable', e=e)
+            device.connect_status = ConnectStatus.UNREACHABLE
+            device.oper_status = OperStatus.UNKNOWN
+            self.adapter_agent.device_update(device)
+            return
+
+        # Now set the initial PM configuration for this device
+        self.pm_metrics = AdapterPmMetrics(device)
+        pm_config = self.pm_metrics.make_proto()
+        log.info("initial-pm-config", pm_config=pm_config)
+        self.adapter_agent.device_update_pm_config(pm_config, init=True)
+
+        # Setup alarm handler
+        self.alarms = AdapterAlarms(self.adapter, device)
+
+        # TODO: Is there anything required to verify nni and PON ports
+
+        # Set the logical device id
+        device = self.adapter_agent.get_device(device.id)
+        if device.parent_id:
+            self.logical_device_id = device.parent_id
+            self.adapter_agent.reconcile_logical_device(device.parent_id)
+        else:
+            self.log.info('no-logical-device-set')
+
+        # Reconcile child devices
+        self.adapter_agent.reconcile_child_devices(device.id)
+
+        reactor.callInThread(self.rcv_grpc)
+
+        # Start collecting stats from the device after a brief pause
+        self.start_kpi_collection(device.id)
+
+        self.log.info('reconciling-OLT-device-ends')
+
+    @inlineCallbacks
+    def rcv_grpc(self):
+        """
+        This call establishes a GRPC stream to receive frames.
+        """
+        yield self.get_channel()
+        stub = ponsim_pb2.PonSimStub(self.channel)
+        # stub = ponsim_pb2.PonSimStub(self.get_channel())
+
+        # Attempt to establish a grpc stream with the remote ponsim service
+        self.frames = stub.ReceiveFrames(Empty())
+
+        self.log.info('start-receiving-grpc-frames')
+
+        try:
+            for frame in self.frames:
+                self.log.info('received-grpc-frame',
+                              frame_len=len(frame.payload))
+                self._rcv_frame(frame.payload)
+
+        except _Rendezvous, e:
+            log.warn('grpc-connection-lost', message=e.message)
+
+        self.log.info('stopped-receiving-grpc-frames')
+
+
+    # VOLTHA's flow decomposition removes the information about which flows
+    # are trap flows where traffic should be forwarded to the controller.
+    # We'll go through the flows and change the output port of flows that we
+    # know to be trap flows to the OF CONTROLLER port.
+    def update_flow_table(self, flows):
+        stub = ponsim_pb2.PonSimStub(self.get_channel())
+        self.log.info('pushing-olt-flow-table')
+        for flow in flows:
+            classifier_info = {}
+            for field in fd.get_ofb_fields(flow):
+                if field.type == fd.ETH_TYPE:
+                    classifier_info['eth_type'] = field.eth_type
+                    self.log.debug('field-type-eth-type',
+                                   eth_type=classifier_info['eth_type'])
+                elif field.type == fd.IP_PROTO:
+                    classifier_info['ip_proto'] = field.ip_proto
+                    self.log.debug('field-type-ip-proto',
+                                   ip_proto=classifier_info['ip_proto'])
+            if ('ip_proto' in classifier_info and (
+                    classifier_info['ip_proto'] == 17 or
+                    classifier_info['ip_proto'] == 2)) or (
+                    'eth_type' in classifier_info and
+                    classifier_info['eth_type'] == 0x888e):
+                for action in fd.get_actions(flow):
+                    if action.type == ofp.OFPAT_OUTPUT:
+                        action.output.port = ofp.OFPP_CONTROLLER
+            self.log.info('out_port', out_port=fd.get_out_port(flow))
+
+        stub.UpdateFlowTable(FlowTable(
+            port=0,
+            flows=flows
+        ))
+        self.log.info('success')
+
+    def remove_from_flow_table(self, flows):
+        self.log.debug('remove-from-flow-table', flows=flows)
+        # TODO: Update PONSIM code to accept incremental flow changes
+        # Once completed, the accepts_add_remove_flow_updates for this
+        # device type can be set to True
+
+    def add_to_flow_table(self, flows):
+        self.log.debug('add-to-flow-table', flows=flows)
+        # TODO: Update PONSIM code to accept incremental flow changes
+        # Once completed, the accepts_add_remove_flow_updates for this
+        # device type can be set to True
+
+    def update_pm_config(self, device, pm_config):
+        log.info("handler-update-pm-config", device=device,
+                 pm_config=pm_config)
+        self.pm_metrics.update(pm_config)
+
+    def send_proxied_message(self, proxy_address, msg):
+        self.log.info('sending-proxied-message')
+        if isinstance(msg, FlowTable):
+            stub = ponsim_pb2.PonSimStub(self.get_channel())
+            self.log.info('pushing-onu-flow-table', port=msg.port)
+            res = stub.UpdateFlowTable(msg)
+            self.adapter_agent.receive_proxied_message(proxy_address, res)
+
+    def packet_out(self, egress_port, msg):
+        self.log.info('sending-packet-out', egress_port=egress_port,
+                      msg=hexify(msg))
+        pkt = Ether(msg)
+        out_pkt = pkt
+        if egress_port != self.nni_port.port_no:
+            # don't do the vlan manipulation for the NNI port, vlans are already correct
+            out_pkt = (
+                    Ether(src=pkt.src, dst=pkt.dst) /
+                    Dot1Q(vlan=egress_port, type=pkt.type) /
+                    pkt.payload
+            )
+
+        # TODO need better way of mapping logical ports to PON ports
+        out_port = self.nni_port.port_no if egress_port == self.nni_port.port_no else 1
+
+        # send over grpc stream
+        stub = ponsim_pb2.PonSimStub(self.get_channel())
+        frame = PonSimFrame(id=self.device_id, payload=str(out_pkt), out_port=out_port)
+        stub.SendFrame(frame)
+
+
+    @inlineCallbacks
+    def reboot(self):
+        self.log.info('rebooting', device_id=self.device_id)
+
+        # Update the operational status to ACTIVATING and connect status to
+        # UNREACHABLE
+        device = self.adapter_agent.get_device(self.device_id)
+        previous_oper_status = device.oper_status
+        previous_conn_status = device.connect_status
+        device.oper_status = OperStatus.ACTIVATING
+        device.connect_status = ConnectStatus.UNREACHABLE
+        self.adapter_agent.device_update(device)
+
+        # Update the child devices connect state to UNREACHABLE
+        self.adapter_agent.update_child_devices_state(self.device_id,
+                                                      connect_status=ConnectStatus.UNREACHABLE)
+
+        # Sleep 10 secs, simulating a reboot
+        # TODO: send alert and clear alert after the reboot
+        yield asleep(10)
+
+        # Change the operational status back to its previous state.  With a
+        # real OLT the operational state should be the state the device is
+        # after a reboot.
+        # Get the latest device reference
+        device = self.adapter_agent.get_device(self.device_id)
+        device.oper_status = previous_oper_status
+        device.connect_status = previous_conn_status
+        self.adapter_agent.device_update(device)
+
+        # Update the child devices connect state to REACHABLE
+        self.adapter_agent.update_child_devices_state(self.device_id,
+                                                      connect_status=ConnectStatus.REACHABLE)
+
+        self.log.info('rebooted', device_id=self.device_id)
+
+    def self_test_device(self, device):
+        """
+        This is called to Self a device based on a NBI call.
+        :param device: A Voltha.Device object.
+        :return: Will return result of self test
+        """
+        log.info('self-test-device', device=device.id)
+        raise NotImplementedError()
+
+    def disable(self):
+        self.log.info('disabling', device_id=self.device_id)
+
+        self.stop_kpi_collection()
+
+        # Get the latest device reference
+        device = self.adapter_agent.get_device(self.device_id)
+
+        # Update the operational status to UNKNOWN
+        device.oper_status = OperStatus.UNKNOWN
+        device.connect_status = ConnectStatus.UNREACHABLE
+        self.adapter_agent.device_update(device)
+
+        # Remove the logical device
+        logical_device = self.adapter_agent.get_logical_device(
+            self.logical_device_id)
+        self.adapter_agent.delete_logical_device(logical_device)
+
+        # Disable all child devices first
+        self.adapter_agent.update_child_devices_state(self.device_id,
+                                                      admin_state=AdminState.DISABLED)
+
+        # Remove the peer references from this device
+        self.adapter_agent.delete_all_peer_references(self.device_id)
+
+        # Set all ports to disabled
+        self.adapter_agent.disable_all_ports(self.device_id)
+
+        self.close_channel()
+        self.log.info('disabled-grpc-channel')
+
+        #  Update the logice device mapping
+        if self.logical_device_id in \
+                self.adapter.logical_device_id_to_root_device_id:
+            del self.adapter.logical_device_id_to_root_device_id[
+                self.logical_device_id]
+
+        # TODO:
+        # 1) Remove all flows from the device
+        # 2) Remove the device from ponsim
+
+        self.log.info('disabled', device_id=device.id)
+
+    def reenable(self):
+        self.log.info('re-enabling', device_id=self.device_id)
+
+        # Get the latest device reference
+        device = self.adapter_agent.get_device(self.device_id)
+
+        # Set the ofp_port_no and nni_port in case we bypassed the reconcile
+        # process if the device was in DISABLED state on voltha restart
+        if not self.ofp_port_no and not self.nni_port:
+            stub = ponsim_pb2.PonSimStub(self.get_channel())
+            info = stub.GetDeviceInfo(Empty())
+            log.info('got-info', info=info)
+            self.ofp_port_no = info.nni_port
+            self.nni_port = self._get_nni_port()
+
+        # Update the connect status to REACHABLE
+        device.connect_status = ConnectStatus.REACHABLE
+        self.adapter_agent.device_update(device)
+
+        # Set all ports to enabled
+        self.adapter_agent.enable_all_ports(self.device_id)
+
+        ld = LogicalDevice(
+            # not setting id and datapth_id will let the adapter agent pick id
+            desc=ofp_desc(
+                hw_desc='simulated pon',
+                sw_desc='simulated pon',
+                serial_num=uuid4().hex,
+                dp_desc='n/a'
+            ),
+            switch_features=ofp_switch_features(
+                n_buffers=256,  # TODO fake for now
+                n_tables=2,  # TODO ditto
+                capabilities=(  # TODO and ditto
+                        OFPC_FLOW_STATS
+                        | OFPC_TABLE_STATS
+                        | OFPC_PORT_STATS
+                        | OFPC_GROUP_STATS
+                )
+            ),
+            root_device_id=device.id
+        )
+        mac_address = "AA:BB:CC:DD:EE:FF"
+        ld_initialized = self.adapter_agent.create_logical_device(ld,
+                                                                  dpid=mac_address)
+        cap = OFPPF_1GB_FD | OFPPF_FIBER
+        self.adapter_agent.add_logical_port(ld_initialized.id, LogicalPort(
+            id='nni',
+            ofp_port=ofp_port(
+                port_no=self.ofp_port_no,
+                hw_addr=mac_str_to_tuple(
+                    '00:00:00:00:00:%02x' % self.ofp_port_no),
+                name='nni',
+                config=0,
+                state=OFPPS_LIVE,
+                curr=cap,
+                advertised=cap,
+                peer=cap,
+                curr_speed=OFPPF_1GB_FD,
+                max_speed=OFPPF_1GB_FD
+            ),
+            device_id=device.id,
+            device_port_no=self.nni_port.port_no,
+            root_port=True
+        ))
+
+        device = self.adapter_agent.get_device(device.id)
+        device.parent_id = ld_initialized.id
+        device.oper_status = OperStatus.ACTIVE
+        self.adapter_agent.device_update(device)
+        self.logical_device_id = ld_initialized.id
+
+        # Reenable all child devices
+        self.adapter_agent.update_child_devices_state(device.id,
+                                                      admin_state=AdminState.ENABLED)
+
+        # establish frame grpc-stream
+        reactor.callInThread(self.rcv_grpc)
+
+        self.start_kpi_collection(device.id)
+
+        self.log.info('re-enabled', device_id=device.id)
+
+    def delete(self):
+        self.log.info('deleting', device_id=self.device_id)
+
+        # Remove all child devices
+        self.adapter_agent.delete_all_child_devices(self.device_id)
+
+        self.close_channel()
+        self.log.info('disabled-grpc-channel')
+
+        # TODO:
+        # 1) Remove all flows from the device
+        # 2) Remove the device from ponsim
+
+        self.log.info('deleted', device_id=self.device_id)
+
+    def start_kpi_collection(self, device_id):
+
+        def _collect(device_id, prefix):
+
+            try:
+                # Step 1: gather metrics from device
+                port_metrics = \
+                    self.pm_metrics.collect_port_metrics(self.get_channel())
+
+                # Step 2: prepare the KpiEvent for submission
+                # we can time-stamp them here (or could use time derived from OLT
+                ts = arrow.utcnow().timestamp
+                kpi_event = KpiEvent(
+                    type=KpiEventType.slice,
+                    ts=ts,
+                    prefixes={
+                        # OLT NNI port
+                        prefix + '.nni': MetricValuePairs(
+                            metrics=port_metrics['nni']),
+                        # OLT PON port
+                        prefix + '.pon': MetricValuePairs(
+                            metrics=port_metrics['pon'])
+                    }
+                )
+
+                # Step 3: submit
+                self.adapter_agent.submit_kpis(kpi_event)
+
+            except Exception as e:
+                log.exception('failed-to-submit-kpis', e=e)
+
+        self.pm_metrics.start_collector(_collect)
+
+    def stop_kpi_collection(self):
+        self.pm_metrics.stop_collector()