Dependencies for the affinity router and the
affinity routing daemon.
Change-Id: Icda72c3594ef7f8f0bc0c33dc03087a4c25529ca
diff --git a/vendor/github.com/prometheus/procfs/ttar b/vendor/github.com/prometheus/procfs/ttar
new file mode 100755
index 0000000..b0171a1
--- /dev/null
+++ b/vendor/github.com/prometheus/procfs/ttar
@@ -0,0 +1,389 @@
+#!/usr/bin/env bash
+
+# Purpose: plain text tar format
+# Limitations: - only suitable for text files, directories, and symlinks
+# - stores only filename, content, and mode
+# - not designed for untrusted input
+#
+# Note: must work with bash version 3.2 (macOS)
+
+# Copyright 2017 Roger Luethi
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -o errexit -o nounset
+
+# Sanitize environment (for instance, standard sorting of glob matches)
+export LC_ALL=C
+
+path=""
+CMD=""
+ARG_STRING="$*"
+
+#------------------------------------------------------------------------------
+# Not all sed implementations can work on null bytes. In order to make ttar
+# work out of the box on macOS, use Python as a stream editor.
+
+USE_PYTHON=0
+
+PYTHON_CREATE_FILTER=$(cat << 'PCF'
+#!/usr/bin/env python
+
+import re
+import sys
+
+for line in sys.stdin:
+ line = re.sub(r'EOF', r'\EOF', line)
+ line = re.sub(r'NULLBYTE', r'\NULLBYTE', line)
+ line = re.sub('\x00', r'NULLBYTE', line)
+ sys.stdout.write(line)
+PCF
+)
+
+PYTHON_EXTRACT_FILTER=$(cat << 'PEF'
+#!/usr/bin/env python
+
+import re
+import sys
+
+for line in sys.stdin:
+ line = re.sub(r'(?<!\\)NULLBYTE', '\x00', line)
+ line = re.sub(r'\\NULLBYTE', 'NULLBYTE', line)
+ line = re.sub(r'([^\\])EOF', r'\1', line)
+ line = re.sub(r'\\EOF', 'EOF', line)
+ sys.stdout.write(line)
+PEF
+)
+
+function test_environment {
+ if [[ "$(echo "a" | sed 's/a/\x0/' | wc -c)" -ne 2 ]]; then
+ echo "WARNING sed unable to handle null bytes, using Python (slow)."
+ if ! which python >/dev/null; then
+ echo "ERROR Python not found. Aborting."
+ exit 2
+ fi
+ USE_PYTHON=1
+ fi
+}
+
+#------------------------------------------------------------------------------
+
+function usage {
+ bname=$(basename "$0")
+ cat << USAGE
+Usage: $bname [-C <DIR>] -c -f <ARCHIVE> <FILE...> (create archive)
+ $bname -t -f <ARCHIVE> (list archive contents)
+ $bname [-C <DIR>] -x -f <ARCHIVE> (extract archive)
+
+Options:
+ -C <DIR> (change directory)
+ -v (verbose)
+
+Example: Change to sysfs directory, create ttar file from fixtures directory
+ $bname -C sysfs -c -f sysfs/fixtures.ttar fixtures/
+USAGE
+exit "$1"
+}
+
+function vecho {
+ if [ "${VERBOSE:-}" == "yes" ]; then
+ echo >&7 "$@"
+ fi
+}
+
+function set_cmd {
+ if [ -n "$CMD" ]; then
+ echo "ERROR: more than one command given"
+ echo
+ usage 2
+ fi
+ CMD=$1
+}
+
+unset VERBOSE
+
+while getopts :cf:htxvC: opt; do
+ case $opt in
+ c)
+ set_cmd "create"
+ ;;
+ f)
+ ARCHIVE=$OPTARG
+ ;;
+ h)
+ usage 0
+ ;;
+ t)
+ set_cmd "list"
+ ;;
+ x)
+ set_cmd "extract"
+ ;;
+ v)
+ VERBOSE=yes
+ exec 7>&1
+ ;;
+ C)
+ CDIR=$OPTARG
+ ;;
+ *)
+ echo >&2 "ERROR: invalid option -$OPTARG"
+ echo
+ usage 1
+ ;;
+ esac
+done
+
+# Remove processed options from arguments
+shift $(( OPTIND - 1 ));
+
+if [ "${CMD:-}" == "" ]; then
+ echo >&2 "ERROR: no command given"
+ echo
+ usage 1
+elif [ "${ARCHIVE:-}" == "" ]; then
+ echo >&2 "ERROR: no archive name given"
+ echo
+ usage 1
+fi
+
+function list {
+ local path=""
+ local size=0
+ local line_no=0
+ local ttar_file=$1
+ if [ -n "${2:-}" ]; then
+ echo >&2 "ERROR: too many arguments."
+ echo
+ usage 1
+ fi
+ if [ ! -e "$ttar_file" ]; then
+ echo >&2 "ERROR: file not found ($ttar_file)"
+ echo
+ usage 1
+ fi
+ while read -r line; do
+ line_no=$(( line_no + 1 ))
+ if [ $size -gt 0 ]; then
+ size=$(( size - 1 ))
+ continue
+ fi
+ if [[ $line =~ ^Path:\ (.*)$ ]]; then
+ path=${BASH_REMATCH[1]}
+ elif [[ $line =~ ^Lines:\ (.*)$ ]]; then
+ size=${BASH_REMATCH[1]}
+ echo "$path"
+ elif [[ $line =~ ^Directory:\ (.*)$ ]]; then
+ path=${BASH_REMATCH[1]}
+ echo "$path/"
+ elif [[ $line =~ ^SymlinkTo:\ (.*)$ ]]; then
+ echo "$path -> ${BASH_REMATCH[1]}"
+ fi
+ done < "$ttar_file"
+}
+
+function extract {
+ local path=""
+ local size=0
+ local line_no=0
+ local ttar_file=$1
+ if [ -n "${2:-}" ]; then
+ echo >&2 "ERROR: too many arguments."
+ echo
+ usage 1
+ fi
+ if [ ! -e "$ttar_file" ]; then
+ echo >&2 "ERROR: file not found ($ttar_file)"
+ echo
+ usage 1
+ fi
+ while IFS= read -r line; do
+ line_no=$(( line_no + 1 ))
+ local eof_without_newline
+ if [ "$size" -gt 0 ]; then
+ if [[ "$line" =~ [^\\]EOF ]]; then
+ # An EOF not preceeded by a backslash indicates that the line
+ # does not end with a newline
+ eof_without_newline=1
+ else
+ eof_without_newline=0
+ fi
+ # Replace NULLBYTE with null byte if at beginning of line
+ # Replace NULLBYTE with null byte unless preceeded by backslash
+ # Remove one backslash in front of NULLBYTE (if any)
+ # Remove EOF unless preceeded by backslash
+ # Remove one backslash in front of EOF
+ if [ $USE_PYTHON -eq 1 ]; then
+ echo -n "$line" | python -c "$PYTHON_EXTRACT_FILTER" >> "$path"
+ else
+ # The repeated pattern makes up for sed's lack of negative
+ # lookbehind assertions (for consecutive null bytes).
+ echo -n "$line" | \
+ sed -e 's/^NULLBYTE/\x0/g;
+ s/\([^\\]\)NULLBYTE/\1\x0/g;
+ s/\([^\\]\)NULLBYTE/\1\x0/g;
+ s/\\NULLBYTE/NULLBYTE/g;
+ s/\([^\\]\)EOF/\1/g;
+ s/\\EOF/EOF/g;
+ ' >> "$path"
+ fi
+ if [[ "$eof_without_newline" -eq 0 ]]; then
+ echo >> "$path"
+ fi
+ size=$(( size - 1 ))
+ continue
+ fi
+ if [[ $line =~ ^Path:\ (.*)$ ]]; then
+ path=${BASH_REMATCH[1]}
+ if [ -e "$path" ] || [ -L "$path" ]; then
+ rm "$path"
+ fi
+ elif [[ $line =~ ^Lines:\ (.*)$ ]]; then
+ size=${BASH_REMATCH[1]}
+ # Create file even if it is zero-length.
+ touch "$path"
+ vecho " $path"
+ elif [[ $line =~ ^Mode:\ (.*)$ ]]; then
+ mode=${BASH_REMATCH[1]}
+ chmod "$mode" "$path"
+ vecho "$mode"
+ elif [[ $line =~ ^Directory:\ (.*)$ ]]; then
+ path=${BASH_REMATCH[1]}
+ mkdir -p "$path"
+ vecho " $path/"
+ elif [[ $line =~ ^SymlinkTo:\ (.*)$ ]]; then
+ ln -s "${BASH_REMATCH[1]}" "$path"
+ vecho " $path -> ${BASH_REMATCH[1]}"
+ elif [[ $line =~ ^# ]]; then
+ # Ignore comments between files
+ continue
+ else
+ echo >&2 "ERROR: Unknown keyword on line $line_no: $line"
+ exit 1
+ fi
+ done < "$ttar_file"
+}
+
+function div {
+ echo "# ttar - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -" \
+ "- - - - - -"
+}
+
+function get_mode {
+ local mfile=$1
+ if [ -z "${STAT_OPTION:-}" ]; then
+ if stat -c '%a' "$mfile" >/dev/null 2>&1; then
+ # GNU stat
+ STAT_OPTION='-c'
+ STAT_FORMAT='%a'
+ else
+ # BSD stat
+ STAT_OPTION='-f'
+ # Octal output, user/group/other (omit file type, sticky bit)
+ STAT_FORMAT='%OLp'
+ fi
+ fi
+ stat "${STAT_OPTION}" "${STAT_FORMAT}" "$mfile"
+}
+
+function _create {
+ shopt -s nullglob
+ local mode
+ local eof_without_newline
+ while (( "$#" )); do
+ file=$1
+ if [ -L "$file" ]; then
+ echo "Path: $file"
+ symlinkTo=$(readlink "$file")
+ echo "SymlinkTo: $symlinkTo"
+ vecho " $file -> $symlinkTo"
+ div
+ elif [ -d "$file" ]; then
+ # Strip trailing slash (if there is one)
+ file=${file%/}
+ echo "Directory: $file"
+ mode=$(get_mode "$file")
+ echo "Mode: $mode"
+ vecho "$mode $file/"
+ div
+ # Find all files and dirs, including hidden/dot files
+ for x in "$file/"{*,.[^.]*}; do
+ _create "$x"
+ done
+ elif [ -f "$file" ]; then
+ echo "Path: $file"
+ lines=$(wc -l "$file"|awk '{print $1}')
+ eof_without_newline=0
+ if [[ "$(wc -c "$file"|awk '{print $1}')" -gt 0 ]] && \
+ [[ "$(tail -c 1 "$file" | wc -l)" -eq 0 ]]; then
+ eof_without_newline=1
+ lines=$((lines+1))
+ fi
+ echo "Lines: $lines"
+ # Add backslash in front of EOF
+ # Add backslash in front of NULLBYTE
+ # Replace null byte with NULLBYTE
+ if [ $USE_PYTHON -eq 1 ]; then
+ < "$file" python -c "$PYTHON_CREATE_FILTER"
+ else
+ < "$file" \
+ sed 's/EOF/\\EOF/g;
+ s/NULLBYTE/\\NULLBYTE/g;
+ s/\x0/NULLBYTE/g;
+ '
+ fi
+ if [[ "$eof_without_newline" -eq 1 ]]; then
+ # Finish line with EOF to indicate that the original line did
+ # not end with a linefeed
+ echo "EOF"
+ fi
+ mode=$(get_mode "$file")
+ echo "Mode: $mode"
+ vecho "$mode $file"
+ div
+ else
+ echo >&2 "ERROR: file not found ($file in $(pwd))"
+ exit 2
+ fi
+ shift
+ done
+}
+
+function create {
+ ttar_file=$1
+ shift
+ if [ -z "${1:-}" ]; then
+ echo >&2 "ERROR: missing arguments."
+ echo
+ usage 1
+ fi
+ if [ -e "$ttar_file" ]; then
+ rm "$ttar_file"
+ fi
+ exec > "$ttar_file"
+ echo "# Archive created by ttar $ARG_STRING"
+ _create "$@"
+}
+
+test_environment
+
+if [ -n "${CDIR:-}" ]; then
+ if [[ "$ARCHIVE" != /* ]]; then
+ # Relative path: preserve the archive's location before changing
+ # directory
+ ARCHIVE="$(pwd)/$ARCHIVE"
+ fi
+ cd "$CDIR"
+fi
+
+"$CMD" "$ARCHIVE" "$@"