Dependencies for the affinity router and the
affinity routing daemon.
Change-Id: Icda72c3594ef7f8f0bc0c33dc03087a4c25529ca
diff --git a/vendor/k8s.io/api/extensions/v1beta1/generated.proto b/vendor/k8s.io/api/extensions/v1beta1/generated.proto
new file mode 100644
index 0000000..efcda7e
--- /dev/null
+++ b/vendor/k8s.io/api/extensions/v1beta1/generated.proto
@@ -0,0 +1,1160 @@
+/*
+Copyright The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+
+// This file was autogenerated by go-to-protobuf. Do not edit it manually!
+
+syntax = 'proto2';
+
+package k8s.io.api.extensions.v1beta1;
+
+import "k8s.io/api/core/v1/generated.proto";
+import "k8s.io/apimachinery/pkg/apis/meta/v1/generated.proto";
+import "k8s.io/apimachinery/pkg/runtime/generated.proto";
+import "k8s.io/apimachinery/pkg/runtime/schema/generated.proto";
+import "k8s.io/apimachinery/pkg/util/intstr/generated.proto";
+
+// Package-wide variables from generator "generated".
+option go_package = "v1beta1";
+
+// AllowedFlexVolume represents a single Flexvolume that is allowed to be used.
+// Deprecated: use AllowedFlexVolume from policy API Group instead.
+message AllowedFlexVolume {
+ // driver is the name of the Flexvolume driver.
+ optional string driver = 1;
+}
+
+// AllowedHostPath defines the host volume conditions that will be enabled by a policy
+// for pods to use. It requires the path prefix to be defined.
+// Deprecated: use AllowedHostPath from policy API Group instead.
+message AllowedHostPath {
+ // pathPrefix is the path prefix that the host volume must match.
+ // It does not support `*`.
+ // Trailing slashes are trimmed when validating the path prefix with a host path.
+ //
+ // Examples:
+ // `/foo` would allow `/foo`, `/foo/` and `/foo/bar`
+ // `/foo` would not allow `/food` or `/etc/foo`
+ optional string pathPrefix = 1;
+
+ // when set to true, will allow host volumes matching the pathPrefix only if all volume mounts are readOnly.
+ // +optional
+ optional bool readOnly = 2;
+}
+
+// DEPRECATED - This group version of DaemonSet is deprecated by apps/v1beta2/DaemonSet. See the release notes for
+// more information.
+// DaemonSet represents the configuration of a daemon set.
+message DaemonSet {
+ // Standard object's metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // The desired behavior of this daemon set.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
+ // +optional
+ optional DaemonSetSpec spec = 2;
+
+ // The current status of this daemon set. This data may be
+ // out of date by some window of time.
+ // Populated by the system.
+ // Read-only.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
+ // +optional
+ optional DaemonSetStatus status = 3;
+}
+
+// DaemonSetCondition describes the state of a DaemonSet at a certain point.
+message DaemonSetCondition {
+ // Type of DaemonSet condition.
+ optional string type = 1;
+
+ // Status of the condition, one of True, False, Unknown.
+ optional string status = 2;
+
+ // Last time the condition transitioned from one status to another.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.Time lastTransitionTime = 3;
+
+ // The reason for the condition's last transition.
+ // +optional
+ optional string reason = 4;
+
+ // A human readable message indicating details about the transition.
+ // +optional
+ optional string message = 5;
+}
+
+// DaemonSetList is a collection of daemon sets.
+message DaemonSetList {
+ // Standard list metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+ // A list of daemon sets.
+ repeated DaemonSet items = 2;
+}
+
+// DaemonSetSpec is the specification of a daemon set.
+message DaemonSetSpec {
+ // A label query over pods that are managed by the daemon set.
+ // Must match in order to be controlled.
+ // If empty, defaulted to labels on Pod template.
+ // More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector selector = 1;
+
+ // An object that describes the pod that will be created.
+ // The DaemonSet will create exactly one copy of this pod on every node
+ // that matches the template's node selector (or on every node if no node
+ // selector is specified).
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template
+ optional k8s.io.api.core.v1.PodTemplateSpec template = 2;
+
+ // An update strategy to replace existing DaemonSet pods with new pods.
+ // +optional
+ optional DaemonSetUpdateStrategy updateStrategy = 3;
+
+ // The minimum number of seconds for which a newly created DaemonSet pod should
+ // be ready without any of its container crashing, for it to be considered
+ // available. Defaults to 0 (pod will be considered available as soon as it
+ // is ready).
+ // +optional
+ optional int32 minReadySeconds = 4;
+
+ // DEPRECATED.
+ // A sequence number representing a specific generation of the template.
+ // Populated by the system. It can be set only during the creation.
+ // +optional
+ optional int64 templateGeneration = 5;
+
+ // The number of old history to retain to allow rollback.
+ // This is a pointer to distinguish between explicit zero and not specified.
+ // Defaults to 10.
+ // +optional
+ optional int32 revisionHistoryLimit = 6;
+}
+
+// DaemonSetStatus represents the current status of a daemon set.
+message DaemonSetStatus {
+ // The number of nodes that are running at least 1
+ // daemon pod and are supposed to run the daemon pod.
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
+ optional int32 currentNumberScheduled = 1;
+
+ // The number of nodes that are running the daemon pod, but are
+ // not supposed to run the daemon pod.
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
+ optional int32 numberMisscheduled = 2;
+
+ // The total number of nodes that should be running the daemon
+ // pod (including nodes correctly running the daemon pod).
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
+ optional int32 desiredNumberScheduled = 3;
+
+ // The number of nodes that should be running the daemon pod and have one
+ // or more of the daemon pod running and ready.
+ optional int32 numberReady = 4;
+
+ // The most recent generation observed by the daemon set controller.
+ // +optional
+ optional int64 observedGeneration = 5;
+
+ // The total number of nodes that are running updated daemon pod
+ // +optional
+ optional int32 updatedNumberScheduled = 6;
+
+ // The number of nodes that should be running the
+ // daemon pod and have one or more of the daemon pod running and
+ // available (ready for at least spec.minReadySeconds)
+ // +optional
+ optional int32 numberAvailable = 7;
+
+ // The number of nodes that should be running the
+ // daemon pod and have none of the daemon pod running and available
+ // (ready for at least spec.minReadySeconds)
+ // +optional
+ optional int32 numberUnavailable = 8;
+
+ // Count of hash collisions for the DaemonSet. The DaemonSet controller
+ // uses this field as a collision avoidance mechanism when it needs to
+ // create the name for the newest ControllerRevision.
+ // +optional
+ optional int32 collisionCount = 9;
+
+ // Represents the latest available observations of a DaemonSet's current state.
+ // +optional
+ // +patchMergeKey=type
+ // +patchStrategy=merge
+ repeated DaemonSetCondition conditions = 10;
+}
+
+message DaemonSetUpdateStrategy {
+ // Type of daemon set update. Can be "RollingUpdate" or "OnDelete".
+ // Default is OnDelete.
+ // +optional
+ optional string type = 1;
+
+ // Rolling update config params. Present only if type = "RollingUpdate".
+ // ---
+ // TODO: Update this to follow our convention for oneOf, whatever we decide it
+ // to be. Same as Deployment `strategy.rollingUpdate`.
+ // See https://github.com/kubernetes/kubernetes/issues/35345
+ // +optional
+ optional RollingUpdateDaemonSet rollingUpdate = 2;
+}
+
+// DEPRECATED - This group version of Deployment is deprecated by apps/v1beta2/Deployment. See the release notes for
+// more information.
+// Deployment enables declarative updates for Pods and ReplicaSets.
+message Deployment {
+ // Standard object metadata.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // Specification of the desired behavior of the Deployment.
+ // +optional
+ optional DeploymentSpec spec = 2;
+
+ // Most recently observed status of the Deployment.
+ // +optional
+ optional DeploymentStatus status = 3;
+}
+
+// DeploymentCondition describes the state of a deployment at a certain point.
+message DeploymentCondition {
+ // Type of deployment condition.
+ optional string type = 1;
+
+ // Status of the condition, one of True, False, Unknown.
+ optional string status = 2;
+
+ // The last time this condition was updated.
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.Time lastUpdateTime = 6;
+
+ // Last time the condition transitioned from one status to another.
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.Time lastTransitionTime = 7;
+
+ // The reason for the condition's last transition.
+ optional string reason = 4;
+
+ // A human readable message indicating details about the transition.
+ optional string message = 5;
+}
+
+// DeploymentList is a list of Deployments.
+message DeploymentList {
+ // Standard list metadata.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+ // Items is the list of Deployments.
+ repeated Deployment items = 2;
+}
+
+// DEPRECATED.
+// DeploymentRollback stores the information required to rollback a deployment.
+message DeploymentRollback {
+ // Required: This must match the Name of a deployment.
+ optional string name = 1;
+
+ // The annotations to be updated to a deployment
+ // +optional
+ map<string, string> updatedAnnotations = 2;
+
+ // The config of this deployment rollback.
+ optional RollbackConfig rollbackTo = 3;
+}
+
+// DeploymentSpec is the specification of the desired behavior of the Deployment.
+message DeploymentSpec {
+ // Number of desired pods. This is a pointer to distinguish between explicit
+ // zero and not specified. Defaults to 1.
+ // +optional
+ optional int32 replicas = 1;
+
+ // Label selector for pods. Existing ReplicaSets whose pods are
+ // selected by this will be the ones affected by this deployment.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector selector = 2;
+
+ // Template describes the pods that will be created.
+ optional k8s.io.api.core.v1.PodTemplateSpec template = 3;
+
+ // The deployment strategy to use to replace existing pods with new ones.
+ // +optional
+ // +patchStrategy=retainKeys
+ optional DeploymentStrategy strategy = 4;
+
+ // Minimum number of seconds for which a newly created pod should be ready
+ // without any of its container crashing, for it to be considered available.
+ // Defaults to 0 (pod will be considered available as soon as it is ready)
+ // +optional
+ optional int32 minReadySeconds = 5;
+
+ // The number of old ReplicaSets to retain to allow rollback.
+ // This is a pointer to distinguish between explicit zero and not specified.
+ // This is set to the max value of int32 (i.e. 2147483647) by default, which
+ // means "retaining all old RelicaSets".
+ // +optional
+ optional int32 revisionHistoryLimit = 6;
+
+ // Indicates that the deployment is paused and will not be processed by the
+ // deployment controller.
+ // +optional
+ optional bool paused = 7;
+
+ // DEPRECATED.
+ // The config this deployment is rolling back to. Will be cleared after rollback is done.
+ // +optional
+ optional RollbackConfig rollbackTo = 8;
+
+ // The maximum time in seconds for a deployment to make progress before it
+ // is considered to be failed. The deployment controller will continue to
+ // process failed deployments and a condition with a ProgressDeadlineExceeded
+ // reason will be surfaced in the deployment status. Note that progress will
+ // not be estimated during the time a deployment is paused. This is set to
+ // the max value of int32 (i.e. 2147483647) by default, which means "no deadline".
+ // +optional
+ optional int32 progressDeadlineSeconds = 9;
+}
+
+// DeploymentStatus is the most recently observed status of the Deployment.
+message DeploymentStatus {
+ // The generation observed by the deployment controller.
+ // +optional
+ optional int64 observedGeneration = 1;
+
+ // Total number of non-terminated pods targeted by this deployment (their labels match the selector).
+ // +optional
+ optional int32 replicas = 2;
+
+ // Total number of non-terminated pods targeted by this deployment that have the desired template spec.
+ // +optional
+ optional int32 updatedReplicas = 3;
+
+ // Total number of ready pods targeted by this deployment.
+ // +optional
+ optional int32 readyReplicas = 7;
+
+ // Total number of available pods (ready for at least minReadySeconds) targeted by this deployment.
+ // +optional
+ optional int32 availableReplicas = 4;
+
+ // Total number of unavailable pods targeted by this deployment. This is the total number of
+ // pods that are still required for the deployment to have 100% available capacity. They may
+ // either be pods that are running but not yet available or pods that still have not been created.
+ // +optional
+ optional int32 unavailableReplicas = 5;
+
+ // Represents the latest available observations of a deployment's current state.
+ // +patchMergeKey=type
+ // +patchStrategy=merge
+ repeated DeploymentCondition conditions = 6;
+
+ // Count of hash collisions for the Deployment. The Deployment controller uses this
+ // field as a collision avoidance mechanism when it needs to create the name for the
+ // newest ReplicaSet.
+ // +optional
+ optional int32 collisionCount = 8;
+}
+
+// DeploymentStrategy describes how to replace existing pods with new ones.
+message DeploymentStrategy {
+ // Type of deployment. Can be "Recreate" or "RollingUpdate". Default is RollingUpdate.
+ // +optional
+ optional string type = 1;
+
+ // Rolling update config params. Present only if DeploymentStrategyType =
+ // RollingUpdate.
+ // ---
+ // TODO: Update this to follow our convention for oneOf, whatever we decide it
+ // to be.
+ // +optional
+ optional RollingUpdateDeployment rollingUpdate = 2;
+}
+
+// FSGroupStrategyOptions defines the strategy type and options used to create the strategy.
+// Deprecated: use FSGroupStrategyOptions from policy API Group instead.
+message FSGroupStrategyOptions {
+ // rule is the strategy that will dictate what FSGroup is used in the SecurityContext.
+ // +optional
+ optional string rule = 1;
+
+ // ranges are the allowed ranges of fs groups. If you would like to force a single
+ // fs group then supply a single range with the same start and end. Required for MustRunAs.
+ // +optional
+ repeated IDRange ranges = 2;
+}
+
+// HTTPIngressPath associates a path regex with a backend. Incoming urls matching
+// the path are forwarded to the backend.
+message HTTPIngressPath {
+ // Path is an extended POSIX regex as defined by IEEE Std 1003.1,
+ // (i.e this follows the egrep/unix syntax, not the perl syntax)
+ // matched against the path of an incoming request. Currently it can
+ // contain characters disallowed from the conventional "path"
+ // part of a URL as defined by RFC 3986. Paths must begin with
+ // a '/'. If unspecified, the path defaults to a catch all sending
+ // traffic to the backend.
+ // +optional
+ optional string path = 1;
+
+ // Backend defines the referenced service endpoint to which the traffic
+ // will be forwarded to.
+ optional IngressBackend backend = 2;
+}
+
+// HTTPIngressRuleValue is a list of http selectors pointing to backends.
+// In the example: http://<host>/<path>?<searchpart> -> backend where
+// where parts of the url correspond to RFC 3986, this resource will be used
+// to match against everything after the last '/' and before the first '?'
+// or '#'.
+message HTTPIngressRuleValue {
+ // A collection of paths that map requests to backends.
+ repeated HTTPIngressPath paths = 1;
+}
+
+// HostPortRange defines a range of host ports that will be enabled by a policy
+// for pods to use. It requires both the start and end to be defined.
+// Deprecated: use HostPortRange from policy API Group instead.
+message HostPortRange {
+ // min is the start of the range, inclusive.
+ optional int32 min = 1;
+
+ // max is the end of the range, inclusive.
+ optional int32 max = 2;
+}
+
+// IDRange provides a min/max of an allowed range of IDs.
+// Deprecated: use IDRange from policy API Group instead.
+message IDRange {
+ // min is the start of the range, inclusive.
+ optional int64 min = 1;
+
+ // max is the end of the range, inclusive.
+ optional int64 max = 2;
+}
+
+// DEPRECATED 1.9 - This group version of IPBlock is deprecated by networking/v1/IPBlock.
+// IPBlock describes a particular CIDR (Ex. "192.168.1.1/24") that is allowed to the pods
+// matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should
+// not be included within this rule.
+message IPBlock {
+ // CIDR is a string representing the IP Block
+ // Valid examples are "192.168.1.1/24"
+ optional string cidr = 1;
+
+ // Except is a slice of CIDRs that should not be included within an IP Block
+ // Valid examples are "192.168.1.1/24"
+ // Except values will be rejected if they are outside the CIDR range
+ // +optional
+ repeated string except = 2;
+}
+
+// Ingress is a collection of rules that allow inbound connections to reach the
+// endpoints defined by a backend. An Ingress can be configured to give services
+// externally-reachable urls, load balance traffic, terminate SSL, offer name
+// based virtual hosting etc.
+message Ingress {
+ // Standard object's metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // Spec is the desired state of the Ingress.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
+ // +optional
+ optional IngressSpec spec = 2;
+
+ // Status is the current state of the Ingress.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
+ // +optional
+ optional IngressStatus status = 3;
+}
+
+// IngressBackend describes all endpoints for a given service and port.
+message IngressBackend {
+ // Specifies the name of the referenced service.
+ optional string serviceName = 1;
+
+ // Specifies the port of the referenced service.
+ optional k8s.io.apimachinery.pkg.util.intstr.IntOrString servicePort = 2;
+}
+
+// IngressList is a collection of Ingress.
+message IngressList {
+ // Standard object's metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+ // Items is the list of Ingress.
+ repeated Ingress items = 2;
+}
+
+// IngressRule represents the rules mapping the paths under a specified host to
+// the related backend services. Incoming requests are first evaluated for a host
+// match, then routed to the backend associated with the matching IngressRuleValue.
+message IngressRule {
+ // Host is the fully qualified domain name of a network host, as defined
+ // by RFC 3986. Note the following deviations from the "host" part of the
+ // URI as defined in the RFC:
+ // 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the
+ // IP in the Spec of the parent Ingress.
+ // 2. The `:` delimiter is not respected because ports are not allowed.
+ // Currently the port of an Ingress is implicitly :80 for http and
+ // :443 for https.
+ // Both these may change in the future.
+ // Incoming requests are matched against the host before the IngressRuleValue.
+ // If the host is unspecified, the Ingress routes all traffic based on the
+ // specified IngressRuleValue.
+ // +optional
+ optional string host = 1;
+
+ // IngressRuleValue represents a rule to route requests for this IngressRule.
+ // If unspecified, the rule defaults to a http catch-all. Whether that sends
+ // just traffic matching the host to the default backend or all traffic to the
+ // default backend, is left to the controller fulfilling the Ingress. Http is
+ // currently the only supported IngressRuleValue.
+ // +optional
+ optional IngressRuleValue ingressRuleValue = 2;
+}
+
+// IngressRuleValue represents a rule to apply against incoming requests. If the
+// rule is satisfied, the request is routed to the specified backend. Currently
+// mixing different types of rules in a single Ingress is disallowed, so exactly
+// one of the following must be set.
+message IngressRuleValue {
+ // +optional
+ optional HTTPIngressRuleValue http = 1;
+}
+
+// IngressSpec describes the Ingress the user wishes to exist.
+message IngressSpec {
+ // A default backend capable of servicing requests that don't match any
+ // rule. At least one of 'backend' or 'rules' must be specified. This field
+ // is optional to allow the loadbalancer controller or defaulting logic to
+ // specify a global default.
+ // +optional
+ optional IngressBackend backend = 1;
+
+ // TLS configuration. Currently the Ingress only supports a single TLS
+ // port, 443. If multiple members of this list specify different hosts, they
+ // will be multiplexed on the same port according to the hostname specified
+ // through the SNI TLS extension, if the ingress controller fulfilling the
+ // ingress supports SNI.
+ // +optional
+ repeated IngressTLS tls = 2;
+
+ // A list of host rules used to configure the Ingress. If unspecified, or
+ // no rule matches, all traffic is sent to the default backend.
+ // +optional
+ repeated IngressRule rules = 3;
+}
+
+// IngressStatus describe the current state of the Ingress.
+message IngressStatus {
+ // LoadBalancer contains the current status of the load-balancer.
+ // +optional
+ optional k8s.io.api.core.v1.LoadBalancerStatus loadBalancer = 1;
+}
+
+// IngressTLS describes the transport layer security associated with an Ingress.
+message IngressTLS {
+ // Hosts are a list of hosts included in the TLS certificate. The values in
+ // this list must match the name/s used in the tlsSecret. Defaults to the
+ // wildcard host setting for the loadbalancer controller fulfilling this
+ // Ingress, if left unspecified.
+ // +optional
+ repeated string hosts = 1;
+
+ // SecretName is the name of the secret used to terminate SSL traffic on 443.
+ // Field is left optional to allow SSL routing based on SNI hostname alone.
+ // If the SNI host in a listener conflicts with the "Host" header field used
+ // by an IngressRule, the SNI host is used for termination and value of the
+ // Host header is used for routing.
+ // +optional
+ optional string secretName = 2;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicy is deprecated by networking/v1/NetworkPolicy.
+// NetworkPolicy describes what network traffic is allowed for a set of Pods
+message NetworkPolicy {
+ // Standard object's metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // Specification of the desired behavior for this NetworkPolicy.
+ // +optional
+ optional NetworkPolicySpec spec = 2;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicyEgressRule is deprecated by networking/v1/NetworkPolicyEgressRule.
+// NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods
+// matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to.
+// This type is beta-level in 1.8
+message NetworkPolicyEgressRule {
+ // List of destination ports for outgoing traffic.
+ // Each item in this list is combined using a logical OR. If this field is
+ // empty or missing, this rule matches all ports (traffic not restricted by port).
+ // If this field is present and contains at least one item, then this rule allows
+ // traffic only if the traffic matches at least one port in the list.
+ // +optional
+ repeated NetworkPolicyPort ports = 1;
+
+ // List of destinations for outgoing traffic of pods selected for this rule.
+ // Items in this list are combined using a logical OR operation. If this field is
+ // empty or missing, this rule matches all destinations (traffic not restricted by
+ // destination). If this field is present and contains at least one item, this rule
+ // allows traffic only if the traffic matches at least one item in the to list.
+ // +optional
+ repeated NetworkPolicyPeer to = 2;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicyIngressRule is deprecated by networking/v1/NetworkPolicyIngressRule.
+// This NetworkPolicyIngressRule matches traffic if and only if the traffic matches both ports AND from.
+message NetworkPolicyIngressRule {
+ // List of ports which should be made accessible on the pods selected for this rule.
+ // Each item in this list is combined using a logical OR.
+ // If this field is empty or missing, this rule matches all ports (traffic not restricted by port).
+ // If this field is present and contains at least one item, then this rule allows traffic
+ // only if the traffic matches at least one port in the list.
+ // +optional
+ repeated NetworkPolicyPort ports = 1;
+
+ // List of sources which should be able to access the pods selected for this rule.
+ // Items in this list are combined using a logical OR operation.
+ // If this field is empty or missing, this rule matches all sources (traffic not restricted by source).
+ // If this field is present and contains at least on item, this rule allows traffic only if the
+ // traffic matches at least one item in the from list.
+ // +optional
+ repeated NetworkPolicyPeer from = 2;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicyList is deprecated by networking/v1/NetworkPolicyList.
+// Network Policy List is a list of NetworkPolicy objects.
+message NetworkPolicyList {
+ // Standard list metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+ // Items is a list of schema objects.
+ repeated NetworkPolicy items = 2;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicyPeer is deprecated by networking/v1/NetworkPolicyPeer.
+message NetworkPolicyPeer {
+ // This is a label selector which selects Pods. This field follows standard label
+ // selector semantics; if present but empty, it selects all pods.
+ //
+ // If NamespaceSelector is also set, then the NetworkPolicyPeer as a whole selects
+ // the Pods matching PodSelector in the Namespaces selected by NamespaceSelector.
+ // Otherwise it selects the Pods matching PodSelector in the policy's own Namespace.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector podSelector = 1;
+
+ // Selects Namespaces using cluster-scoped labels. This field follows standard label
+ // selector semantics; if present but empty, it selects all namespaces.
+ //
+ // If PodSelector is also set, then the NetworkPolicyPeer as a whole selects
+ // the Pods matching PodSelector in the Namespaces selected by NamespaceSelector.
+ // Otherwise it selects all Pods in the Namespaces selected by NamespaceSelector.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector namespaceSelector = 2;
+
+ // IPBlock defines policy on a particular IPBlock. If this field is set then
+ // neither of the other fields can be.
+ // +optional
+ optional IPBlock ipBlock = 3;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicyPort is deprecated by networking/v1/NetworkPolicyPort.
+message NetworkPolicyPort {
+ // Optional. The protocol (TCP, UDP, or SCTP) which traffic must match.
+ // If not specified, this field defaults to TCP.
+ // +optional
+ optional string protocol = 1;
+
+ // If specified, the port on the given protocol. This can
+ // either be a numerical or named port on a pod. If this field is not provided,
+ // this matches all port names and numbers.
+ // If present, only traffic on the specified protocol AND port
+ // will be matched.
+ // +optional
+ optional k8s.io.apimachinery.pkg.util.intstr.IntOrString port = 2;
+}
+
+// DEPRECATED 1.9 - This group version of NetworkPolicySpec is deprecated by networking/v1/NetworkPolicySpec.
+message NetworkPolicySpec {
+ // Selects the pods to which this NetworkPolicy object applies. The array of ingress rules
+ // is applied to any pods selected by this field. Multiple network policies can select the
+ // same set of pods. In this case, the ingress rules for each are combined additively.
+ // This field is NOT optional and follows standard label selector semantics.
+ // An empty podSelector matches all pods in this namespace.
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector podSelector = 1;
+
+ // List of ingress rules to be applied to the selected pods.
+ // Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod
+ // OR if the traffic source is the pod's local node,
+ // OR if the traffic matches at least one ingress rule across all of the NetworkPolicy
+ // objects whose podSelector matches the pod.
+ // If this field is empty then this NetworkPolicy does not allow any traffic
+ // (and serves solely to ensure that the pods it selects are isolated by default).
+ // +optional
+ repeated NetworkPolicyIngressRule ingress = 2;
+
+ // List of egress rules to be applied to the selected pods. Outgoing traffic is
+ // allowed if there are no NetworkPolicies selecting the pod (and cluster policy
+ // otherwise allows the traffic), OR if the traffic matches at least one egress rule
+ // across all of the NetworkPolicy objects whose podSelector matches the pod. If
+ // this field is empty then this NetworkPolicy limits all outgoing traffic (and serves
+ // solely to ensure that the pods it selects are isolated by default).
+ // This field is beta-level in 1.8
+ // +optional
+ repeated NetworkPolicyEgressRule egress = 3;
+
+ // List of rule types that the NetworkPolicy relates to.
+ // Valid options are Ingress, Egress, or Ingress,Egress.
+ // If this field is not specified, it will default based on the existence of Ingress or Egress rules;
+ // policies that contain an Egress section are assumed to affect Egress, and all policies
+ // (whether or not they contain an Ingress section) are assumed to affect Ingress.
+ // If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ].
+ // Likewise, if you want to write a policy that specifies that no egress is allowed,
+ // you must specify a policyTypes value that include "Egress" (since such a policy would not include
+ // an Egress section and would otherwise default to just [ "Ingress" ]).
+ // This field is beta-level in 1.8
+ // +optional
+ repeated string policyTypes = 4;
+}
+
+// PodSecurityPolicy governs the ability to make requests that affect the Security Context
+// that will be applied to a pod and container.
+// Deprecated: use PodSecurityPolicy from policy API Group instead.
+message PodSecurityPolicy {
+ // Standard object's metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // spec defines the policy enforced.
+ // +optional
+ optional PodSecurityPolicySpec spec = 2;
+}
+
+// PodSecurityPolicyList is a list of PodSecurityPolicy objects.
+// Deprecated: use PodSecurityPolicyList from policy API Group instead.
+message PodSecurityPolicyList {
+ // Standard list metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+ // items is a list of schema objects.
+ repeated PodSecurityPolicy items = 2;
+}
+
+// PodSecurityPolicySpec defines the policy enforced.
+// Deprecated: use PodSecurityPolicySpec from policy API Group instead.
+message PodSecurityPolicySpec {
+ // privileged determines if a pod can request to be run as privileged.
+ // +optional
+ optional bool privileged = 1;
+
+ // defaultAddCapabilities is the default set of capabilities that will be added to the container
+ // unless the pod spec specifically drops the capability. You may not list a capability in both
+ // defaultAddCapabilities and requiredDropCapabilities. Capabilities added here are implicitly
+ // allowed, and need not be included in the allowedCapabilities list.
+ // +optional
+ repeated string defaultAddCapabilities = 2;
+
+ // requiredDropCapabilities are the capabilities that will be dropped from the container. These
+ // are required to be dropped and cannot be added.
+ // +optional
+ repeated string requiredDropCapabilities = 3;
+
+ // allowedCapabilities is a list of capabilities that can be requested to add to the container.
+ // Capabilities in this field may be added at the pod author's discretion.
+ // You must not list a capability in both allowedCapabilities and requiredDropCapabilities.
+ // +optional
+ repeated string allowedCapabilities = 4;
+
+ // volumes is a white list of allowed volume plugins. Empty indicates that
+ // no volumes may be used. To allow all volumes you may use '*'.
+ // +optional
+ repeated string volumes = 5;
+
+ // hostNetwork determines if the policy allows the use of HostNetwork in the pod spec.
+ // +optional
+ optional bool hostNetwork = 6;
+
+ // hostPorts determines which host port ranges are allowed to be exposed.
+ // +optional
+ repeated HostPortRange hostPorts = 7;
+
+ // hostPID determines if the policy allows the use of HostPID in the pod spec.
+ // +optional
+ optional bool hostPID = 8;
+
+ // hostIPC determines if the policy allows the use of HostIPC in the pod spec.
+ // +optional
+ optional bool hostIPC = 9;
+
+ // seLinux is the strategy that will dictate the allowable labels that may be set.
+ optional SELinuxStrategyOptions seLinux = 10;
+
+ // runAsUser is the strategy that will dictate the allowable RunAsUser values that may be set.
+ optional RunAsUserStrategyOptions runAsUser = 11;
+
+ // RunAsGroup is the strategy that will dictate the allowable RunAsGroup values that may be set.
+ // If this field is omitted, the pod's RunAsGroup can take any value. This field requires the
+ // RunAsGroup feature gate to be enabled.
+ // +optional
+ optional RunAsGroupStrategyOptions runAsGroup = 22;
+
+ // supplementalGroups is the strategy that will dictate what supplemental groups are used by the SecurityContext.
+ optional SupplementalGroupsStrategyOptions supplementalGroups = 12;
+
+ // fsGroup is the strategy that will dictate what fs group is used by the SecurityContext.
+ optional FSGroupStrategyOptions fsGroup = 13;
+
+ // readOnlyRootFilesystem when set to true will force containers to run with a read only root file
+ // system. If the container specifically requests to run with a non-read only root file system
+ // the PSP should deny the pod.
+ // If set to false the container may run with a read only root file system if it wishes but it
+ // will not be forced to.
+ // +optional
+ optional bool readOnlyRootFilesystem = 14;
+
+ // defaultAllowPrivilegeEscalation controls the default setting for whether a
+ // process can gain more privileges than its parent process.
+ // +optional
+ optional bool defaultAllowPrivilegeEscalation = 15;
+
+ // allowPrivilegeEscalation determines if a pod can request to allow
+ // privilege escalation. If unspecified, defaults to true.
+ // +optional
+ optional bool allowPrivilegeEscalation = 16;
+
+ // allowedHostPaths is a white list of allowed host paths. Empty indicates
+ // that all host paths may be used.
+ // +optional
+ repeated AllowedHostPath allowedHostPaths = 17;
+
+ // allowedFlexVolumes is a whitelist of allowed Flexvolumes. Empty or nil indicates that all
+ // Flexvolumes may be used. This parameter is effective only when the usage of the Flexvolumes
+ // is allowed in the "volumes" field.
+ // +optional
+ repeated AllowedFlexVolume allowedFlexVolumes = 18;
+
+ // allowedUnsafeSysctls is a list of explicitly allowed unsafe sysctls, defaults to none.
+ // Each entry is either a plain sysctl name or ends in "*" in which case it is considered
+ // as a prefix of allowed sysctls. Single * means all unsafe sysctls are allowed.
+ // Kubelet has to whitelist all allowed unsafe sysctls explicitly to avoid rejection.
+ //
+ // Examples:
+ // e.g. "foo/*" allows "foo/bar", "foo/baz", etc.
+ // e.g. "foo.*" allows "foo.bar", "foo.baz", etc.
+ // +optional
+ repeated string allowedUnsafeSysctls = 19;
+
+ // forbiddenSysctls is a list of explicitly forbidden sysctls, defaults to none.
+ // Each entry is either a plain sysctl name or ends in "*" in which case it is considered
+ // as a prefix of forbidden sysctls. Single * means all sysctls are forbidden.
+ //
+ // Examples:
+ // e.g. "foo/*" forbids "foo/bar", "foo/baz", etc.
+ // e.g. "foo.*" forbids "foo.bar", "foo.baz", etc.
+ // +optional
+ repeated string forbiddenSysctls = 20;
+
+ // AllowedProcMountTypes is a whitelist of allowed ProcMountTypes.
+ // Empty or nil indicates that only the DefaultProcMountType may be used.
+ // This requires the ProcMountType feature flag to be enabled.
+ // +optional
+ repeated string allowedProcMountTypes = 21;
+}
+
+// DEPRECATED - This group version of ReplicaSet is deprecated by apps/v1beta2/ReplicaSet. See the release notes for
+// more information.
+// ReplicaSet ensures that a specified number of pod replicas are running at any given time.
+message ReplicaSet {
+ // If the Labels of a ReplicaSet are empty, they are defaulted to
+ // be the same as the Pod(s) that the ReplicaSet manages.
+ // Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // Spec defines the specification of the desired behavior of the ReplicaSet.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
+ // +optional
+ optional ReplicaSetSpec spec = 2;
+
+ // Status is the most recently observed status of the ReplicaSet.
+ // This data may be out of date by some window of time.
+ // Populated by the system.
+ // Read-only.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
+ // +optional
+ optional ReplicaSetStatus status = 3;
+}
+
+// ReplicaSetCondition describes the state of a replica set at a certain point.
+message ReplicaSetCondition {
+ // Type of replica set condition.
+ optional string type = 1;
+
+ // Status of the condition, one of True, False, Unknown.
+ optional string status = 2;
+
+ // The last time the condition transitioned from one status to another.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.Time lastTransitionTime = 3;
+
+ // The reason for the condition's last transition.
+ // +optional
+ optional string reason = 4;
+
+ // A human readable message indicating details about the transition.
+ // +optional
+ optional string message = 5;
+}
+
+// ReplicaSetList is a collection of ReplicaSets.
+message ReplicaSetList {
+ // Standard list metadata.
+ // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+ // List of ReplicaSets.
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller
+ repeated ReplicaSet items = 2;
+}
+
+// ReplicaSetSpec is the specification of a ReplicaSet.
+message ReplicaSetSpec {
+ // Replicas is the number of desired replicas.
+ // This is a pointer to distinguish between explicit zero and unspecified.
+ // Defaults to 1.
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller/#what-is-a-replicationcontroller
+ // +optional
+ optional int32 replicas = 1;
+
+ // Minimum number of seconds for which a newly created pod should be ready
+ // without any of its container crashing, for it to be considered available.
+ // Defaults to 0 (pod will be considered available as soon as it is ready)
+ // +optional
+ optional int32 minReadySeconds = 4;
+
+ // Selector is a label query over pods that should match the replica count.
+ // If the selector is empty, it is defaulted to the labels present on the pod template.
+ // Label keys and values that must match in order to be controlled by this replica set.
+ // More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector selector = 2;
+
+ // Template is the object that describes the pod that will be created if
+ // insufficient replicas are detected.
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template
+ // +optional
+ optional k8s.io.api.core.v1.PodTemplateSpec template = 3;
+}
+
+// ReplicaSetStatus represents the current status of a ReplicaSet.
+message ReplicaSetStatus {
+ // Replicas is the most recently oberved number of replicas.
+ // More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller/#what-is-a-replicationcontroller
+ optional int32 replicas = 1;
+
+ // The number of pods that have labels matching the labels of the pod template of the replicaset.
+ // +optional
+ optional int32 fullyLabeledReplicas = 2;
+
+ // The number of ready replicas for this replica set.
+ // +optional
+ optional int32 readyReplicas = 4;
+
+ // The number of available replicas (ready for at least minReadySeconds) for this replica set.
+ // +optional
+ optional int32 availableReplicas = 5;
+
+ // ObservedGeneration reflects the generation of the most recently observed ReplicaSet.
+ // +optional
+ optional int64 observedGeneration = 3;
+
+ // Represents the latest available observations of a replica set's current state.
+ // +optional
+ // +patchMergeKey=type
+ // +patchStrategy=merge
+ repeated ReplicaSetCondition conditions = 6;
+}
+
+// Dummy definition
+message ReplicationControllerDummy {
+}
+
+// DEPRECATED.
+message RollbackConfig {
+ // The revision to rollback to. If set to 0, rollback to the last revision.
+ // +optional
+ optional int64 revision = 1;
+}
+
+// Spec to control the desired behavior of daemon set rolling update.
+message RollingUpdateDaemonSet {
+ // The maximum number of DaemonSet pods that can be unavailable during the
+ // update. Value can be an absolute number (ex: 5) or a percentage of total
+ // number of DaemonSet pods at the start of the update (ex: 10%). Absolute
+ // number is calculated from percentage by rounding up.
+ // This cannot be 0.
+ // Default value is 1.
+ // Example: when this is set to 30%, at most 30% of the total number of nodes
+ // that should be running the daemon pod (i.e. status.desiredNumberScheduled)
+ // can have their pods stopped for an update at any given
+ // time. The update starts by stopping at most 30% of those DaemonSet pods
+ // and then brings up new DaemonSet pods in their place. Once the new pods
+ // are available, it then proceeds onto other DaemonSet pods, thus ensuring
+ // that at least 70% of original number of DaemonSet pods are available at
+ // all times during the update.
+ // +optional
+ optional k8s.io.apimachinery.pkg.util.intstr.IntOrString maxUnavailable = 1;
+}
+
+// Spec to control the desired behavior of rolling update.
+message RollingUpdateDeployment {
+ // The maximum number of pods that can be unavailable during the update.
+ // Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%).
+ // Absolute number is calculated from percentage by rounding down.
+ // This can not be 0 if MaxSurge is 0.
+ // By default, a fixed value of 1 is used.
+ // Example: when this is set to 30%, the old RC can be scaled down to 70% of desired pods
+ // immediately when the rolling update starts. Once new pods are ready, old RC
+ // can be scaled down further, followed by scaling up the new RC, ensuring
+ // that the total number of pods available at all times during the update is at
+ // least 70% of desired pods.
+ // +optional
+ optional k8s.io.apimachinery.pkg.util.intstr.IntOrString maxUnavailable = 1;
+
+ // The maximum number of pods that can be scheduled above the desired number of
+ // pods.
+ // Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%).
+ // This can not be 0 if MaxUnavailable is 0.
+ // Absolute number is calculated from percentage by rounding up.
+ // By default, a value of 1 is used.
+ // Example: when this is set to 30%, the new RC can be scaled up immediately when
+ // the rolling update starts, such that the total number of old and new pods do not exceed
+ // 130% of desired pods. Once old pods have been killed,
+ // new RC can be scaled up further, ensuring that total number of pods running
+ // at any time during the update is atmost 130% of desired pods.
+ // +optional
+ optional k8s.io.apimachinery.pkg.util.intstr.IntOrString maxSurge = 2;
+}
+
+// RunAsGroupStrategyOptions defines the strategy type and any options used to create the strategy.
+// Deprecated: use RunAsGroupStrategyOptions from policy API Group instead.
+message RunAsGroupStrategyOptions {
+ // rule is the strategy that will dictate the allowable RunAsGroup values that may be set.
+ optional string rule = 1;
+
+ // ranges are the allowed ranges of gids that may be used. If you would like to force a single gid
+ // then supply a single range with the same start and end. Required for MustRunAs.
+ // +optional
+ repeated IDRange ranges = 2;
+}
+
+// RunAsUserStrategyOptions defines the strategy type and any options used to create the strategy.
+// Deprecated: use RunAsUserStrategyOptions from policy API Group instead.
+message RunAsUserStrategyOptions {
+ // rule is the strategy that will dictate the allowable RunAsUser values that may be set.
+ optional string rule = 1;
+
+ // ranges are the allowed ranges of uids that may be used. If you would like to force a single uid
+ // then supply a single range with the same start and end. Required for MustRunAs.
+ // +optional
+ repeated IDRange ranges = 2;
+}
+
+// SELinuxStrategyOptions defines the strategy type and any options used to create the strategy.
+// Deprecated: use SELinuxStrategyOptions from policy API Group instead.
+message SELinuxStrategyOptions {
+ // rule is the strategy that will dictate the allowable labels that may be set.
+ optional string rule = 1;
+
+ // seLinuxOptions required to run as; required for MustRunAs
+ // More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
+ // +optional
+ optional k8s.io.api.core.v1.SELinuxOptions seLinuxOptions = 2;
+}
+
+// represents a scaling request for a resource.
+message Scale {
+ // Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata.
+ // +optional
+ optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+ // defines the behavior of the scale. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status.
+ // +optional
+ optional ScaleSpec spec = 2;
+
+ // current status of the scale. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status. Read-only.
+ // +optional
+ optional ScaleStatus status = 3;
+}
+
+// describes the attributes of a scale subresource
+message ScaleSpec {
+ // desired number of instances for the scaled object.
+ // +optional
+ optional int32 replicas = 1;
+}
+
+// represents the current status of a scale subresource.
+message ScaleStatus {
+ // actual number of observed instances of the scaled object.
+ optional int32 replicas = 1;
+
+ // label query over pods that should match the replicas count. More info: http://kubernetes.io/docs/user-guide/labels#label-selectors
+ // +optional
+ map<string, string> selector = 2;
+
+ // label selector for pods that should match the replicas count. This is a serializated
+ // version of both map-based and more expressive set-based selectors. This is done to
+ // avoid introspection in the clients. The string will be in the same format as the
+ // query-param syntax. If the target type only supports map-based selectors, both this
+ // field and map-based selector field are populated.
+ // More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
+ // +optional
+ optional string targetSelector = 3;
+}
+
+// SupplementalGroupsStrategyOptions defines the strategy type and options used to create the strategy.
+// Deprecated: use SupplementalGroupsStrategyOptions from policy API Group instead.
+message SupplementalGroupsStrategyOptions {
+ // rule is the strategy that will dictate what supplemental groups is used in the SecurityContext.
+ // +optional
+ optional string rule = 1;
+
+ // ranges are the allowed ranges of supplemental groups. If you would like to force a single
+ // supplemental group then supply a single range with the same start and end. Required for MustRunAs.
+ // +optional
+ repeated IDRange ranges = 2;
+}
+