diff --git a/vendor/k8s.io/api/networking/v1/doc.go b/vendor/k8s.io/api/networking/v1/doc.go
new file mode 100644
index 0000000..887c366
--- /dev/null
+++ b/vendor/k8s.io/api/networking/v1/doc.go
@@ -0,0 +1,21 @@
+/*
+Copyright 2017 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+// +k8s:deepcopy-gen=package
+// +k8s:openapi-gen=true
+// +groupName=networking.k8s.io
+
+package v1 // import "k8s.io/api/networking/v1"
diff --git a/vendor/k8s.io/api/networking/v1/generated.proto b/vendor/k8s.io/api/networking/v1/generated.proto
new file mode 100644
index 0000000..ab3731e
--- /dev/null
+++ b/vendor/k8s.io/api/networking/v1/generated.proto
@@ -0,0 +1,195 @@
+/*
+Copyright The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+
+// This file was autogenerated by go-to-protobuf. Do not edit it manually!
+
+syntax = 'proto2';
+
+package k8s.io.api.networking.v1;
+
+import "k8s.io/api/core/v1/generated.proto";
+import "k8s.io/apimachinery/pkg/apis/meta/v1/generated.proto";
+import "k8s.io/apimachinery/pkg/runtime/generated.proto";
+import "k8s.io/apimachinery/pkg/runtime/schema/generated.proto";
+import "k8s.io/apimachinery/pkg/util/intstr/generated.proto";
+
+// Package-wide variables from generator "generated".
+option go_package = "v1";
+
+// IPBlock describes a particular CIDR (Ex. "192.168.1.1/24") that is allowed to the pods
+// matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should
+// not be included within this rule.
+message IPBlock {
+  // CIDR is a string representing the IP Block
+  // Valid examples are "192.168.1.1/24"
+  optional string cidr = 1;
+
+  // Except is a slice of CIDRs that should not be included within an IP Block
+  // Valid examples are "192.168.1.1/24"
+  // Except values will be rejected if they are outside the CIDR range
+  // +optional
+  repeated string except = 2;
+}
+
+// NetworkPolicy describes what network traffic is allowed for a set of Pods
+message NetworkPolicy {
+  // Standard object's metadata.
+  // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+  // +optional
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;
+
+  // Specification of the desired behavior for this NetworkPolicy.
+  // +optional
+  optional NetworkPolicySpec spec = 2;
+}
+
+// NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods
+// matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to.
+// This type is beta-level in 1.8
+message NetworkPolicyEgressRule {
+  // List of destination ports for outgoing traffic.
+  // Each item in this list is combined using a logical OR. If this field is
+  // empty or missing, this rule matches all ports (traffic not restricted by port).
+  // If this field is present and contains at least one item, then this rule allows
+  // traffic only if the traffic matches at least one port in the list.
+  // +optional
+  repeated NetworkPolicyPort ports = 1;
+
+  // List of destinations for outgoing traffic of pods selected for this rule.
+  // Items in this list are combined using a logical OR operation. If this field is
+  // empty or missing, this rule matches all destinations (traffic not restricted by
+  // destination). If this field is present and contains at least one item, this rule
+  // allows traffic only if the traffic matches at least one item in the to list.
+  // +optional
+  repeated NetworkPolicyPeer to = 2;
+}
+
+// NetworkPolicyIngressRule describes a particular set of traffic that is allowed to the pods
+// matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and from.
+message NetworkPolicyIngressRule {
+  // List of ports which should be made accessible on the pods selected for this
+  // rule. Each item in this list is combined using a logical OR. If this field is
+  // empty or missing, this rule matches all ports (traffic not restricted by port).
+  // If this field is present and contains at least one item, then this rule allows
+  // traffic only if the traffic matches at least one port in the list.
+  // +optional
+  repeated NetworkPolicyPort ports = 1;
+
+  // List of sources which should be able to access the pods selected for this rule.
+  // Items in this list are combined using a logical OR operation. If this field is
+  // empty or missing, this rule matches all sources (traffic not restricted by
+  // source). If this field is present and contains at least on item, this rule
+  // allows traffic only if the traffic matches at least one item in the from list.
+  // +optional
+  repeated NetworkPolicyPeer from = 2;
+}
+
+// NetworkPolicyList is a list of NetworkPolicy objects.
+message NetworkPolicyList {
+  // Standard list metadata.
+  // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+  // +optional
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;
+
+  // Items is a list of schema objects.
+  repeated NetworkPolicy items = 2;
+}
+
+// NetworkPolicyPeer describes a peer to allow traffic from. Only certain combinations of
+// fields are allowed
+message NetworkPolicyPeer {
+  // This is a label selector which selects Pods. This field follows standard label
+  // selector semantics; if present but empty, it selects all pods.
+  //
+  // If NamespaceSelector is also set, then the NetworkPolicyPeer as a whole selects
+  // the Pods matching PodSelector in the Namespaces selected by NamespaceSelector.
+  // Otherwise it selects the Pods matching PodSelector in the policy's own Namespace.
+  // +optional
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector podSelector = 1;
+
+  // Selects Namespaces using cluster-scoped labels. This field follows standard label
+  // selector semantics; if present but empty, it selects all namespaces.
+  //
+  // If PodSelector is also set, then the NetworkPolicyPeer as a whole selects
+  // the Pods matching PodSelector in the Namespaces selected by NamespaceSelector.
+  // Otherwise it selects all Pods in the Namespaces selected by NamespaceSelector.
+  // +optional
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector namespaceSelector = 2;
+
+  // IPBlock defines policy on a particular IPBlock. If this field is set then
+  // neither of the other fields can be.
+  // +optional
+  optional IPBlock ipBlock = 3;
+}
+
+// NetworkPolicyPort describes a port to allow traffic on
+message NetworkPolicyPort {
+  // The protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this
+  // field defaults to TCP.
+  // +optional
+  optional string protocol = 1;
+
+  // The port on the given protocol. This can either be a numerical or named port on
+  // a pod. If this field is not provided, this matches all port names and numbers.
+  // +optional
+  optional k8s.io.apimachinery.pkg.util.intstr.IntOrString port = 2;
+}
+
+// NetworkPolicySpec provides the specification of a NetworkPolicy
+message NetworkPolicySpec {
+  // Selects the pods to which this NetworkPolicy object applies. The array of
+  // ingress rules is applied to any pods selected by this field. Multiple network
+  // policies can select the same set of pods. In this case, the ingress rules for
+  // each are combined additively. This field is NOT optional and follows standard
+  // label selector semantics. An empty podSelector matches all pods in this
+  // namespace.
+  optional k8s.io.apimachinery.pkg.apis.meta.v1.LabelSelector podSelector = 1;
+
+  // List of ingress rules to be applied to the selected pods. Traffic is allowed to
+  // a pod if there are no NetworkPolicies selecting the pod
+  // (and cluster policy otherwise allows the traffic), OR if the traffic source is
+  // the pod's local node, OR if the traffic matches at least one ingress rule
+  // across all of the NetworkPolicy objects whose podSelector matches the pod. If
+  // this field is empty then this NetworkPolicy does not allow any traffic (and serves
+  // solely to ensure that the pods it selects are isolated by default)
+  // +optional
+  repeated NetworkPolicyIngressRule ingress = 2;
+
+  // List of egress rules to be applied to the selected pods. Outgoing traffic is
+  // allowed if there are no NetworkPolicies selecting the pod (and cluster policy
+  // otherwise allows the traffic), OR if the traffic matches at least one egress rule
+  // across all of the NetworkPolicy objects whose podSelector matches the pod. If
+  // this field is empty then this NetworkPolicy limits all outgoing traffic (and serves
+  // solely to ensure that the pods it selects are isolated by default).
+  // This field is beta-level in 1.8
+  // +optional
+  repeated NetworkPolicyEgressRule egress = 3;
+
+  // List of rule types that the NetworkPolicy relates to.
+  // Valid options are Ingress, Egress, or Ingress,Egress.
+  // If this field is not specified, it will default based on the existence of Ingress or Egress rules;
+  // policies that contain an Egress section are assumed to affect Egress, and all policies
+  // (whether or not they contain an Ingress section) are assumed to affect Ingress.
+  // If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ].
+  // Likewise, if you want to write a policy that specifies that no egress is allowed,
+  // you must specify a policyTypes value that include "Egress" (since such a policy would not include
+  // an Egress section and would otherwise default to just [ "Ingress" ]).
+  // This field is beta-level in 1.8
+  // +optional
+  repeated string policyTypes = 4;
+}
+
diff --git a/vendor/k8s.io/api/networking/v1/register.go b/vendor/k8s.io/api/networking/v1/register.go
new file mode 100644
index 0000000..f47f22e
--- /dev/null
+++ b/vendor/k8s.io/api/networking/v1/register.go
@@ -0,0 +1,53 @@
+/*
+Copyright 2017 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package v1
+
+import (
+	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
+	"k8s.io/apimachinery/pkg/runtime"
+	"k8s.io/apimachinery/pkg/runtime/schema"
+)
+
+// GroupName is the group name use in this package
+const GroupName = "networking.k8s.io"
+
+// SchemeGroupVersion is group version used to register these objects
+var SchemeGroupVersion = schema.GroupVersion{Group: GroupName, Version: "v1"}
+
+// Resource takes an unqualified resource and returns a Group qualified GroupResource
+func Resource(resource string) schema.GroupResource {
+	return SchemeGroupVersion.WithResource(resource).GroupResource()
+}
+
+var (
+	// TODO: move SchemeBuilder with zz_generated.deepcopy.go to k8s.io/api.
+	// localSchemeBuilder and AddToScheme will stay in k8s.io/kubernetes.
+	SchemeBuilder      = runtime.NewSchemeBuilder(addKnownTypes)
+	localSchemeBuilder = &SchemeBuilder
+	AddToScheme        = localSchemeBuilder.AddToScheme
+)
+
+// Adds the list of known types to the given scheme.
+func addKnownTypes(scheme *runtime.Scheme) error {
+	scheme.AddKnownTypes(SchemeGroupVersion,
+		&NetworkPolicy{},
+		&NetworkPolicyList{},
+	)
+
+	metav1.AddToGroupVersion(scheme, SchemeGroupVersion)
+	return nil
+}
diff --git a/vendor/k8s.io/api/networking/v1/types.go b/vendor/k8s.io/api/networking/v1/types.go
new file mode 100644
index 0000000..ce70448
--- /dev/null
+++ b/vendor/k8s.io/api/networking/v1/types.go
@@ -0,0 +1,203 @@
+/*
+Copyright 2017 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package v1
+
+import (
+	"k8s.io/api/core/v1"
+	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
+	"k8s.io/apimachinery/pkg/util/intstr"
+)
+
+// +genclient
+// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object
+
+// NetworkPolicy describes what network traffic is allowed for a set of Pods
+type NetworkPolicy struct {
+	metav1.TypeMeta `json:",inline"`
+	// Standard object's metadata.
+	// More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+	// +optional
+	metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`
+
+	// Specification of the desired behavior for this NetworkPolicy.
+	// +optional
+	Spec NetworkPolicySpec `json:"spec,omitempty" protobuf:"bytes,2,opt,name=spec"`
+}
+
+// Policy Type string describes the NetworkPolicy type
+// This type is beta-level in 1.8
+type PolicyType string
+
+const (
+	// PolicyTypeIngress is a NetworkPolicy that affects ingress traffic on selected pods
+	PolicyTypeIngress PolicyType = "Ingress"
+	// PolicyTypeEgress is a NetworkPolicy that affects egress traffic on selected pods
+	PolicyTypeEgress PolicyType = "Egress"
+)
+
+// NetworkPolicySpec provides the specification of a NetworkPolicy
+type NetworkPolicySpec struct {
+	// Selects the pods to which this NetworkPolicy object applies. The array of
+	// ingress rules is applied to any pods selected by this field. Multiple network
+	// policies can select the same set of pods. In this case, the ingress rules for
+	// each are combined additively. This field is NOT optional and follows standard
+	// label selector semantics. An empty podSelector matches all pods in this
+	// namespace.
+	PodSelector metav1.LabelSelector `json:"podSelector" protobuf:"bytes,1,opt,name=podSelector"`
+
+	// List of ingress rules to be applied to the selected pods. Traffic is allowed to
+	// a pod if there are no NetworkPolicies selecting the pod
+	// (and cluster policy otherwise allows the traffic), OR if the traffic source is
+	// the pod's local node, OR if the traffic matches at least one ingress rule
+	// across all of the NetworkPolicy objects whose podSelector matches the pod. If
+	// this field is empty then this NetworkPolicy does not allow any traffic (and serves
+	// solely to ensure that the pods it selects are isolated by default)
+	// +optional
+	Ingress []NetworkPolicyIngressRule `json:"ingress,omitempty" protobuf:"bytes,2,rep,name=ingress"`
+
+	// List of egress rules to be applied to the selected pods. Outgoing traffic is
+	// allowed if there are no NetworkPolicies selecting the pod (and cluster policy
+	// otherwise allows the traffic), OR if the traffic matches at least one egress rule
+	// across all of the NetworkPolicy objects whose podSelector matches the pod. If
+	// this field is empty then this NetworkPolicy limits all outgoing traffic (and serves
+	// solely to ensure that the pods it selects are isolated by default).
+	// This field is beta-level in 1.8
+	// +optional
+	Egress []NetworkPolicyEgressRule `json:"egress,omitempty" protobuf:"bytes,3,rep,name=egress"`
+
+	// List of rule types that the NetworkPolicy relates to.
+	// Valid options are Ingress, Egress, or Ingress,Egress.
+	// If this field is not specified, it will default based on the existence of Ingress or Egress rules;
+	// policies that contain an Egress section are assumed to affect Egress, and all policies
+	// (whether or not they contain an Ingress section) are assumed to affect Ingress.
+	// If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ].
+	// Likewise, if you want to write a policy that specifies that no egress is allowed,
+	// you must specify a policyTypes value that include "Egress" (since such a policy would not include
+	// an Egress section and would otherwise default to just [ "Ingress" ]).
+	// This field is beta-level in 1.8
+	// +optional
+	PolicyTypes []PolicyType `json:"policyTypes,omitempty" protobuf:"bytes,4,rep,name=policyTypes,casttype=PolicyType"`
+}
+
+// NetworkPolicyIngressRule describes a particular set of traffic that is allowed to the pods
+// matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and from.
+type NetworkPolicyIngressRule struct {
+	// List of ports which should be made accessible on the pods selected for this
+	// rule. Each item in this list is combined using a logical OR. If this field is
+	// empty or missing, this rule matches all ports (traffic not restricted by port).
+	// If this field is present and contains at least one item, then this rule allows
+	// traffic only if the traffic matches at least one port in the list.
+	// +optional
+	Ports []NetworkPolicyPort `json:"ports,omitempty" protobuf:"bytes,1,rep,name=ports"`
+
+	// List of sources which should be able to access the pods selected for this rule.
+	// Items in this list are combined using a logical OR operation. If this field is
+	// empty or missing, this rule matches all sources (traffic not restricted by
+	// source). If this field is present and contains at least on item, this rule
+	// allows traffic only if the traffic matches at least one item in the from list.
+	// +optional
+	From []NetworkPolicyPeer `json:"from,omitempty" protobuf:"bytes,2,rep,name=from"`
+}
+
+// NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods
+// matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to.
+// This type is beta-level in 1.8
+type NetworkPolicyEgressRule struct {
+	// List of destination ports for outgoing traffic.
+	// Each item in this list is combined using a logical OR. If this field is
+	// empty or missing, this rule matches all ports (traffic not restricted by port).
+	// If this field is present and contains at least one item, then this rule allows
+	// traffic only if the traffic matches at least one port in the list.
+	// +optional
+	Ports []NetworkPolicyPort `json:"ports,omitempty" protobuf:"bytes,1,rep,name=ports"`
+
+	// List of destinations for outgoing traffic of pods selected for this rule.
+	// Items in this list are combined using a logical OR operation. If this field is
+	// empty or missing, this rule matches all destinations (traffic not restricted by
+	// destination). If this field is present and contains at least one item, this rule
+	// allows traffic only if the traffic matches at least one item in the to list.
+	// +optional
+	To []NetworkPolicyPeer `json:"to,omitempty" protobuf:"bytes,2,rep,name=to"`
+}
+
+// NetworkPolicyPort describes a port to allow traffic on
+type NetworkPolicyPort struct {
+	// The protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this
+	// field defaults to TCP.
+	// +optional
+	Protocol *v1.Protocol `json:"protocol,omitempty" protobuf:"bytes,1,opt,name=protocol,casttype=k8s.io/api/core/v1.Protocol"`
+
+	// The port on the given protocol. This can either be a numerical or named port on
+	// a pod. If this field is not provided, this matches all port names and numbers.
+	// +optional
+	Port *intstr.IntOrString `json:"port,omitempty" protobuf:"bytes,2,opt,name=port"`
+}
+
+// IPBlock describes a particular CIDR (Ex. "192.168.1.1/24") that is allowed to the pods
+// matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should
+// not be included within this rule.
+type IPBlock struct {
+	// CIDR is a string representing the IP Block
+	// Valid examples are "192.168.1.1/24"
+	CIDR string `json:"cidr" protobuf:"bytes,1,name=cidr"`
+	// Except is a slice of CIDRs that should not be included within an IP Block
+	// Valid examples are "192.168.1.1/24"
+	// Except values will be rejected if they are outside the CIDR range
+	// +optional
+	Except []string `json:"except,omitempty" protobuf:"bytes,2,rep,name=except"`
+}
+
+// NetworkPolicyPeer describes a peer to allow traffic from. Only certain combinations of
+// fields are allowed
+type NetworkPolicyPeer struct {
+	// This is a label selector which selects Pods. This field follows standard label
+	// selector semantics; if present but empty, it selects all pods.
+	//
+	// If NamespaceSelector is also set, then the NetworkPolicyPeer as a whole selects
+	// the Pods matching PodSelector in the Namespaces selected by NamespaceSelector.
+	// Otherwise it selects the Pods matching PodSelector in the policy's own Namespace.
+	// +optional
+	PodSelector *metav1.LabelSelector `json:"podSelector,omitempty" protobuf:"bytes,1,opt,name=podSelector"`
+
+	// Selects Namespaces using cluster-scoped labels. This field follows standard label
+	// selector semantics; if present but empty, it selects all namespaces.
+	//
+	// If PodSelector is also set, then the NetworkPolicyPeer as a whole selects
+	// the Pods matching PodSelector in the Namespaces selected by NamespaceSelector.
+	// Otherwise it selects all Pods in the Namespaces selected by NamespaceSelector.
+	// +optional
+	NamespaceSelector *metav1.LabelSelector `json:"namespaceSelector,omitempty" protobuf:"bytes,2,opt,name=namespaceSelector"`
+
+	// IPBlock defines policy on a particular IPBlock. If this field is set then
+	// neither of the other fields can be.
+	// +optional
+	IPBlock *IPBlock `json:"ipBlock,omitempty" protobuf:"bytes,3,rep,name=ipBlock"`
+}
+
+// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object
+
+// NetworkPolicyList is a list of NetworkPolicy objects.
+type NetworkPolicyList struct {
+	metav1.TypeMeta `json:",inline"`
+	// Standard list metadata.
+	// More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
+	// +optional
+	metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`
+
+	// Items is a list of schema objects.
+	Items []NetworkPolicy `json:"items" protobuf:"bytes,2,rep,name=items"`
+}
diff --git a/vendor/k8s.io/api/networking/v1/types_swagger_doc_generated.go b/vendor/k8s.io/api/networking/v1/types_swagger_doc_generated.go
new file mode 100644
index 0000000..f4363bc
--- /dev/null
+++ b/vendor/k8s.io/api/networking/v1/types_swagger_doc_generated.go
@@ -0,0 +1,113 @@
+/*
+Copyright The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package v1
+
+// This file contains a collection of methods that can be used from go-restful to
+// generate Swagger API documentation for its models. Please read this PR for more
+// information on the implementation: https://github.com/emicklei/go-restful/pull/215
+//
+// TODOs are ignored from the parser (e.g. TODO(andronat):... || TODO:...) if and only if
+// they are on one line! For multiple line or blocks that you want to ignore use ---.
+// Any context after a --- is ignored.
+//
+// Those methods can be generated by using hack/update-generated-swagger-docs.sh
+
+// AUTO-GENERATED FUNCTIONS START HERE. DO NOT EDIT.
+var map_IPBlock = map[string]string{
+	"":       "IPBlock describes a particular CIDR (Ex. \"192.168.1.1/24\") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.",
+	"cidr":   "CIDR is a string representing the IP Block Valid examples are \"192.168.1.1/24\"",
+	"except": "Except is a slice of CIDRs that should not be included within an IP Block Valid examples are \"192.168.1.1/24\" Except values will be rejected if they are outside the CIDR range",
+}
+
+func (IPBlock) SwaggerDoc() map[string]string {
+	return map_IPBlock
+}
+
+var map_NetworkPolicy = map[string]string{
+	"":         "NetworkPolicy describes what network traffic is allowed for a set of Pods",
+	"metadata": "Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata",
+	"spec":     "Specification of the desired behavior for this NetworkPolicy.",
+}
+
+func (NetworkPolicy) SwaggerDoc() map[string]string {
+	return map_NetworkPolicy
+}
+
+var map_NetworkPolicyEgressRule = map[string]string{
+	"":      "NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to. This type is beta-level in 1.8",
+	"ports": "List of destination ports for outgoing traffic. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.",
+	"to":    "List of destinations for outgoing traffic of pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all destinations (traffic not restricted by destination). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the to list.",
+}
+
+func (NetworkPolicyEgressRule) SwaggerDoc() map[string]string {
+	return map_NetworkPolicyEgressRule
+}
+
+var map_NetworkPolicyIngressRule = map[string]string{
+	"":      "NetworkPolicyIngressRule describes a particular set of traffic that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and from.",
+	"ports": "List of ports which should be made accessible on the pods selected for this rule. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.",
+	"from":  "List of sources which should be able to access the pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all sources (traffic not restricted by source). If this field is present and contains at least on item, this rule allows traffic only if the traffic matches at least one item in the from list.",
+}
+
+func (NetworkPolicyIngressRule) SwaggerDoc() map[string]string {
+	return map_NetworkPolicyIngressRule
+}
+
+var map_NetworkPolicyList = map[string]string{
+	"":         "NetworkPolicyList is a list of NetworkPolicy objects.",
+	"metadata": "Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata",
+	"items":    "Items is a list of schema objects.",
+}
+
+func (NetworkPolicyList) SwaggerDoc() map[string]string {
+	return map_NetworkPolicyList
+}
+
+var map_NetworkPolicyPeer = map[string]string{
+	"":                  "NetworkPolicyPeer describes a peer to allow traffic from. Only certain combinations of fields are allowed",
+	"podSelector":       "This is a label selector which selects Pods. This field follows standard label selector semantics; if present but empty, it selects all pods.\n\nIf NamespaceSelector is also set, then the NetworkPolicyPeer as a whole selects the Pods matching PodSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects the Pods matching PodSelector in the policy's own Namespace.",
+	"namespaceSelector": "Selects Namespaces using cluster-scoped labels. This field follows standard label selector semantics; if present but empty, it selects all namespaces.\n\nIf PodSelector is also set, then the NetworkPolicyPeer as a whole selects the Pods matching PodSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects all Pods in the Namespaces selected by NamespaceSelector.",
+	"ipBlock":           "IPBlock defines policy on a particular IPBlock. If this field is set then neither of the other fields can be.",
+}
+
+func (NetworkPolicyPeer) SwaggerDoc() map[string]string {
+	return map_NetworkPolicyPeer
+}
+
+var map_NetworkPolicyPort = map[string]string{
+	"":         "NetworkPolicyPort describes a port to allow traffic on",
+	"protocol": "The protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.",
+	"port":     "The port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers.",
+}
+
+func (NetworkPolicyPort) SwaggerDoc() map[string]string {
+	return map_NetworkPolicyPort
+}
+
+var map_NetworkPolicySpec = map[string]string{
+	"":            "NetworkPolicySpec provides the specification of a NetworkPolicy",
+	"podSelector": "Selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.",
+	"ingress":     "List of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)",
+	"egress":      "List of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8",
+	"policyTypes": "List of rule types that the NetworkPolicy relates to. Valid options are Ingress, Egress, or Ingress,Egress. If this field is not specified, it will default based on the existence of Ingress or Egress rules; policies that contain an Egress section are assumed to affect Egress, and all policies (whether or not they contain an Ingress section) are assumed to affect Ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ \"Egress\" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include \"Egress\" (since such a policy would not include an Egress section and would otherwise default to just [ \"Ingress\" ]). This field is beta-level in 1.8",
+}
+
+func (NetworkPolicySpec) SwaggerDoc() map[string]string {
+	return map_NetworkPolicySpec
+}
+
+// AUTO-GENERATED FUNCTIONS END HERE
diff --git a/vendor/k8s.io/api/networking/v1/zz_generated.deepcopy.go b/vendor/k8s.io/api/networking/v1/zz_generated.deepcopy.go
new file mode 100644
index 0000000..d1e4e88
--- /dev/null
+++ b/vendor/k8s.io/api/networking/v1/zz_generated.deepcopy.go
@@ -0,0 +1,262 @@
+// +build !ignore_autogenerated
+
+/*
+Copyright The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+// Code generated by deepcopy-gen. DO NOT EDIT.
+
+package v1
+
+import (
+	corev1 "k8s.io/api/core/v1"
+	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
+	runtime "k8s.io/apimachinery/pkg/runtime"
+	intstr "k8s.io/apimachinery/pkg/util/intstr"
+)
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *IPBlock) DeepCopyInto(out *IPBlock) {
+	*out = *in
+	if in.Except != nil {
+		in, out := &in.Except, &out.Except
+		*out = make([]string, len(*in))
+		copy(*out, *in)
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new IPBlock.
+func (in *IPBlock) DeepCopy() *IPBlock {
+	if in == nil {
+		return nil
+	}
+	out := new(IPBlock)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicy) DeepCopyInto(out *NetworkPolicy) {
+	*out = *in
+	out.TypeMeta = in.TypeMeta
+	in.ObjectMeta.DeepCopyInto(&out.ObjectMeta)
+	in.Spec.DeepCopyInto(&out.Spec)
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicy.
+func (in *NetworkPolicy) DeepCopy() *NetworkPolicy {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicy)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.
+func (in *NetworkPolicy) DeepCopyObject() runtime.Object {
+	if c := in.DeepCopy(); c != nil {
+		return c
+	}
+	return nil
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicyEgressRule) DeepCopyInto(out *NetworkPolicyEgressRule) {
+	*out = *in
+	if in.Ports != nil {
+		in, out := &in.Ports, &out.Ports
+		*out = make([]NetworkPolicyPort, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	if in.To != nil {
+		in, out := &in.To, &out.To
+		*out = make([]NetworkPolicyPeer, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicyEgressRule.
+func (in *NetworkPolicyEgressRule) DeepCopy() *NetworkPolicyEgressRule {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicyEgressRule)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicyIngressRule) DeepCopyInto(out *NetworkPolicyIngressRule) {
+	*out = *in
+	if in.Ports != nil {
+		in, out := &in.Ports, &out.Ports
+		*out = make([]NetworkPolicyPort, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	if in.From != nil {
+		in, out := &in.From, &out.From
+		*out = make([]NetworkPolicyPeer, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicyIngressRule.
+func (in *NetworkPolicyIngressRule) DeepCopy() *NetworkPolicyIngressRule {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicyIngressRule)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicyList) DeepCopyInto(out *NetworkPolicyList) {
+	*out = *in
+	out.TypeMeta = in.TypeMeta
+	out.ListMeta = in.ListMeta
+	if in.Items != nil {
+		in, out := &in.Items, &out.Items
+		*out = make([]NetworkPolicy, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicyList.
+func (in *NetworkPolicyList) DeepCopy() *NetworkPolicyList {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicyList)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.
+func (in *NetworkPolicyList) DeepCopyObject() runtime.Object {
+	if c := in.DeepCopy(); c != nil {
+		return c
+	}
+	return nil
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicyPeer) DeepCopyInto(out *NetworkPolicyPeer) {
+	*out = *in
+	if in.PodSelector != nil {
+		in, out := &in.PodSelector, &out.PodSelector
+		*out = new(metav1.LabelSelector)
+		(*in).DeepCopyInto(*out)
+	}
+	if in.NamespaceSelector != nil {
+		in, out := &in.NamespaceSelector, &out.NamespaceSelector
+		*out = new(metav1.LabelSelector)
+		(*in).DeepCopyInto(*out)
+	}
+	if in.IPBlock != nil {
+		in, out := &in.IPBlock, &out.IPBlock
+		*out = new(IPBlock)
+		(*in).DeepCopyInto(*out)
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicyPeer.
+func (in *NetworkPolicyPeer) DeepCopy() *NetworkPolicyPeer {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicyPeer)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicyPort) DeepCopyInto(out *NetworkPolicyPort) {
+	*out = *in
+	if in.Protocol != nil {
+		in, out := &in.Protocol, &out.Protocol
+		*out = new(corev1.Protocol)
+		**out = **in
+	}
+	if in.Port != nil {
+		in, out := &in.Port, &out.Port
+		*out = new(intstr.IntOrString)
+		**out = **in
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicyPort.
+func (in *NetworkPolicyPort) DeepCopy() *NetworkPolicyPort {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicyPort)
+	in.DeepCopyInto(out)
+	return out
+}
+
+// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.
+func (in *NetworkPolicySpec) DeepCopyInto(out *NetworkPolicySpec) {
+	*out = *in
+	in.PodSelector.DeepCopyInto(&out.PodSelector)
+	if in.Ingress != nil {
+		in, out := &in.Ingress, &out.Ingress
+		*out = make([]NetworkPolicyIngressRule, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	if in.Egress != nil {
+		in, out := &in.Egress, &out.Egress
+		*out = make([]NetworkPolicyEgressRule, len(*in))
+		for i := range *in {
+			(*in)[i].DeepCopyInto(&(*out)[i])
+		}
+	}
+	if in.PolicyTypes != nil {
+		in, out := &in.PolicyTypes, &out.PolicyTypes
+		*out = make([]PolicyType, len(*in))
+		copy(*out, *in)
+	}
+	return
+}
+
+// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new NetworkPolicySpec.
+func (in *NetworkPolicySpec) DeepCopy() *NetworkPolicySpec {
+	if in == nil {
+		return nil
+	}
+	out := new(NetworkPolicySpec)
+	in.DeepCopyInto(out)
+	return out
+}