diff --git a/vendor/github.com/DataDog/zstd/zdict.h b/vendor/github.com/DataDog/zstd/zdict.h
new file mode 100644
index 0000000..37978ec
--- /dev/null
+++ b/vendor/github.com/DataDog/zstd/zdict.h
@@ -0,0 +1,282 @@
+/*
+ * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef DICTBUILDER_H_001
+#define DICTBUILDER_H_001
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+
+/*======  Dependencies  ======*/
+#include <stddef.h>  /* size_t */
+
+
+/* =====   ZDICTLIB_API : control library symbols visibility   ===== */
+#ifndef ZDICTLIB_VISIBILITY
+#  if defined(__GNUC__) && (__GNUC__ >= 4)
+#    define ZDICTLIB_VISIBILITY __attribute__ ((visibility ("default")))
+#  else
+#    define ZDICTLIB_VISIBILITY
+#  endif
+#endif
+#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1)
+#  define ZDICTLIB_API __declspec(dllexport) ZDICTLIB_VISIBILITY
+#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1)
+#  define ZDICTLIB_API __declspec(dllimport) ZDICTLIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define ZDICTLIB_API ZDICTLIB_VISIBILITY
+#endif
+
+
+/*! ZDICT_trainFromBuffer():
+ *  Train a dictionary from an array of samples.
+ *  Redirect towards ZDICT_optimizeTrainFromBuffer_fastCover() single-threaded, with d=8, steps=4,
+ *  f=20, and accel=1.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *  Note:  Dictionary training will fail if there are not enough samples to construct a
+ *         dictionary, or if most of the samples are too small (< 8 bytes being the lower limit).
+ *         If dictionary training fails, you should use zstd without a dictionary, as the dictionary
+ *         would've been ineffective anyways. If you believe your samples would benefit from a dictionary
+ *         please open an issue with details, and we can look into it.
+ *  Note: ZDICT_trainFromBuffer()'s memory usage is about 6 MB.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer(void* dictBuffer, size_t dictBufferCapacity,
+                                    const void* samplesBuffer,
+                                    const size_t* samplesSizes, unsigned nbSamples);
+
+
+/*======   Helper functions   ======*/
+ZDICTLIB_API unsigned ZDICT_getDictID(const void* dictBuffer, size_t dictSize);  /**< extracts dictID; @return zero if error (not a valid dictionary) */
+ZDICTLIB_API unsigned ZDICT_isError(size_t errorCode);
+ZDICTLIB_API const char* ZDICT_getErrorName(size_t errorCode);
+
+
+
+#ifdef ZDICT_STATIC_LINKING_ONLY
+
+/* ====================================================================================
+ * The definitions in this section are considered experimental.
+ * They should never be used with a dynamic library, as they may change in the future.
+ * They are provided for advanced usages.
+ * Use them only in association with static linking.
+ * ==================================================================================== */
+
+typedef struct {
+    int      compressionLevel;   /* optimize for a specific zstd compression level; 0 means default */
+    unsigned notificationLevel;  /* Write log to stderr; 0 = none (default); 1 = errors; 2 = progression; 3 = details; 4 = debug; */
+    unsigned dictID;             /* force dictID value; 0 means auto mode (32-bits random value) */
+} ZDICT_params_t;
+
+/*! ZDICT_cover_params_t:
+ *  k and d are the only required parameters.
+ *  For others, value 0 means default.
+ */
+typedef struct {
+    unsigned k;                  /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */
+    unsigned d;                  /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */
+    unsigned steps;              /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */
+    unsigned nbThreads;          /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */
+    double splitPoint;           /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (1.0), 1.0 when all samples are used for both training and testing */
+    unsigned shrinkDict;         /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking  */
+    unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */
+    ZDICT_params_t zParams;
+} ZDICT_cover_params_t;
+
+typedef struct {
+    unsigned k;                  /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */
+    unsigned d;                  /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */
+    unsigned f;                  /* log of size of frequency array : constraint: 0 < f <= 31 : 1 means default(20)*/
+    unsigned steps;              /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */
+    unsigned nbThreads;          /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */
+    double splitPoint;           /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (0.75), 1.0 when all samples are used for both training and testing */
+    unsigned accel;              /* Acceleration level: constraint: 0 < accel <= 10, higher means faster and less accurate, 0 means default(1) */
+    unsigned shrinkDict;         /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking  */
+    unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */
+
+    ZDICT_params_t zParams;
+} ZDICT_fastCover_params_t;
+
+/*! ZDICT_trainFromBuffer_cover():
+ *  Train a dictionary from an array of samples using the COVER algorithm.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Note: ZDICT_trainFromBuffer_cover() requires about 9 bytes of memory for each input byte.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer_cover(
+          void *dictBuffer, size_t dictBufferCapacity,
+    const void *samplesBuffer, const size_t *samplesSizes, unsigned nbSamples,
+          ZDICT_cover_params_t parameters);
+
+/*! ZDICT_optimizeTrainFromBuffer_cover():
+ * The same requirements as above hold for all the parameters except `parameters`.
+ * This function tries many parameter combinations and picks the best parameters.
+ * `*parameters` is filled with the best parameters found,
+ * dictionary constructed with those parameters is stored in `dictBuffer`.
+ *
+ * All of the parameters d, k, steps are optional.
+ * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}.
+ * if steps is zero it defaults to its default value.
+ * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000].
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          On success `*parameters` contains the parameters selected.
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ * Note: ZDICT_optimizeTrainFromBuffer_cover() requires about 8 bytes of memory for each input byte and additionally another 5 bytes of memory for each byte of memory for each thread.
+ */
+ZDICTLIB_API size_t ZDICT_optimizeTrainFromBuffer_cover(
+          void* dictBuffer, size_t dictBufferCapacity,
+    const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+          ZDICT_cover_params_t* parameters);
+
+/*! ZDICT_trainFromBuffer_fastCover():
+ *  Train a dictionary from an array of samples using a modified version of COVER algorithm.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  d and k are required.
+ *  All other parameters are optional, will use default values if not provided
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Note: ZDICT_trainFromBuffer_fastCover() requires 6 * 2^f bytes of memory.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer_fastCover(void *dictBuffer,
+                    size_t dictBufferCapacity, const void *samplesBuffer,
+                    const size_t *samplesSizes, unsigned nbSamples,
+                    ZDICT_fastCover_params_t parameters);
+
+/*! ZDICT_optimizeTrainFromBuffer_fastCover():
+ * The same requirements as above hold for all the parameters except `parameters`.
+ * This function tries many parameter combinations (specifically, k and d combinations)
+ * and picks the best parameters. `*parameters` is filled with the best parameters found,
+ * dictionary constructed with those parameters is stored in `dictBuffer`.
+ * All of the parameters d, k, steps, f, and accel are optional.
+ * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}.
+ * if steps is zero it defaults to its default value.
+ * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000].
+ * If f is zero, default value of 20 is used.
+ * If accel is zero, default value of 1 is used.
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          On success `*parameters` contains the parameters selected.
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ * Note: ZDICT_optimizeTrainFromBuffer_fastCover() requires about 6 * 2^f bytes of memory for each thread.
+ */
+ZDICTLIB_API size_t ZDICT_optimizeTrainFromBuffer_fastCover(void* dictBuffer,
+                    size_t dictBufferCapacity, const void* samplesBuffer,
+                    const size_t* samplesSizes, unsigned nbSamples,
+                    ZDICT_fastCover_params_t* parameters);
+
+/*! ZDICT_finalizeDictionary():
+ * Given a custom content as a basis for dictionary, and a set of samples,
+ * finalize dictionary by adding headers and statistics.
+ *
+ * Samples must be stored concatenated in a flat buffer `samplesBuffer`,
+ * supplied with an array of sizes `samplesSizes`, providing the size of each sample in order.
+ *
+ * dictContentSize must be >= ZDICT_CONTENTSIZE_MIN bytes.
+ * maxDictSize must be >= dictContentSize, and must be >= ZDICT_DICTSIZE_MIN bytes.
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`),
+ *          or an error code, which can be tested by ZDICT_isError().
+ * Note: ZDICT_finalizeDictionary() will push notifications into stderr if instructed to, using notificationLevel>0.
+ * Note 2: dictBuffer and dictContent can overlap
+ */
+#define ZDICT_CONTENTSIZE_MIN 128
+#define ZDICT_DICTSIZE_MIN    256
+ZDICTLIB_API size_t ZDICT_finalizeDictionary(void* dictBuffer, size_t dictBufferCapacity,
+                                const void* dictContent, size_t dictContentSize,
+                                const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+                                ZDICT_params_t parameters);
+
+typedef struct {
+    unsigned selectivityLevel;   /* 0 means default; larger => select more => larger dictionary */
+    ZDICT_params_t zParams;
+} ZDICT_legacy_params_t;
+
+/*! ZDICT_trainFromBuffer_legacy():
+ *  Train a dictionary from an array of samples.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * `parameters` is optional and can be provided with values set to 0 to mean "default".
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ *  Note: ZDICT_trainFromBuffer_legacy() will send notifications into stderr if instructed to, using notificationLevel>0.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer_legacy(
+    void *dictBuffer, size_t dictBufferCapacity,
+    const void *samplesBuffer, const size_t *samplesSizes, unsigned nbSamples,
+    ZDICT_legacy_params_t parameters);
+
+/* Deprecation warnings */
+/* It is generally possible to disable deprecation warnings from compiler,
+   for example with -Wno-deprecated-declarations for gcc
+   or _CRT_SECURE_NO_WARNINGS in Visual.
+   Otherwise, it's also possible to manually define ZDICT_DISABLE_DEPRECATE_WARNINGS */
+#ifdef ZDICT_DISABLE_DEPRECATE_WARNINGS
+#  define ZDICT_DEPRECATED(message) ZDICTLIB_API   /* disable deprecation warnings */
+#else
+#  define ZDICT_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__)
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define ZDICT_DEPRECATED(message) [[deprecated(message)]] ZDICTLIB_API
+#  elif (ZDICT_GCC_VERSION >= 405) || defined(__clang__)
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API __attribute__((deprecated(message)))
+#  elif (ZDICT_GCC_VERSION >= 301)
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API __declspec(deprecated(message))
+#  else
+#    pragma message("WARNING: You need to implement ZDICT_DEPRECATED for this compiler")
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API
+#  endif
+#endif /* ZDICT_DISABLE_DEPRECATE_WARNINGS */
+
+ZDICT_DEPRECATED("use ZDICT_finalizeDictionary() instead")
+size_t ZDICT_addEntropyTablesFromBuffer(void* dictBuffer, size_t dictContentSize, size_t dictBufferCapacity,
+                                  const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples);
+
+
+#endif   /* ZDICT_STATIC_LINKING_ONLY */
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif   /* DICTBUILDER_H_001 */