[VOL-4673] Initial translation of data inside mountpoint
Change-Id: Icafbbe25fb4a6ef28049419b8e0eca793c0a0e19
diff --git a/build/yang-files/iana-hardware@2018-03-13.yang b/build/yang-files/iana-hardware@2018-03-13.yang
new file mode 100644
index 0000000..7165863
--- /dev/null
+++ b/build/yang-files/iana-hardware@2018-03-13.yang
@@ -0,0 +1,187 @@
+module iana-hardware {
+ yang-version 1.1;
+ namespace "urn:ietf:params:xml:ns:yang:iana-hardware";
+ prefix ianahw;
+
+ organization "IANA";
+ contact
+ " Internet Assigned Numbers Authority
+
+ Postal: ICANN
+ 12025 Waterfront Drive, Suite 300
+ Los Angeles, CA 90094-2536
+ United States of America
+
+ Tel: +1 310 301 5800
+ E-Mail: iana@iana.org>";
+
+ description
+ "IANA-defined identities for hardware class.
+
+ The latest revision of this YANG module can be obtained from
+ the IANA website.
+
+ Requests for new values should be made to IANA via
+ email (iana@iana.org).
+
+ Copyright (c) 2018 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (https://trustee.ietf.org/license-info).
+
+ The initial version of this YANG module is part of RFC 8348;
+ see the RFC itself for full legal notices.";
+ reference
+ "https://www.iana.org/assignments/yang-parameters";
+
+ revision 2018-03-13 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 8348: A YANG Data Model for Hardware Management";
+ }
+
+ /*
+ * Identities
+ */
+
+ identity hardware-class {
+ description
+ "This identity is the base for all hardware class
+ identifiers.";
+ }
+
+ identity unknown {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is unknown
+ to the server.";
+ }
+
+ identity chassis {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is an
+ overall container for networking equipment. Any class of
+ physical component, except a stack, may be contained within a
+ chassis; a chassis may only be contained within a stack.";
+ }
+
+ identity backplane {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of device for aggregating and forwarding networking traffic,
+ such as a shared backplane in a modular ethernet switch. Note
+ that an implementation may model a backplane as a single
+ physical component, which is actually implemented as multiple
+ discrete physical components (within a chassis or stack).";
+ }
+
+ identity container {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is capable
+ of containing one or more removable physical entities,
+ possibly of different types. For example, each (empty or
+ full) slot in a chassis will be modeled as a container. Note
+ that all removable physical components should be modeled
+ within a container component, such as field-replaceable
+ modules, fans, or power supplies. Note that all known
+ containers should be modeled by the agent, including empty
+ containers.";
+ }
+
+ identity power-supply {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is a
+ power-supplying component.";
+ }
+
+ identity fan {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is a fan or
+ other heat-reduction component.";
+ }
+
+ identity sensor {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of sensor, such as a temperature sensor within a router
+ chassis.";
+ }
+
+ identity module {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of self-contained sub-system. If a module component is
+ removable, then it should be modeled within a container
+ component; otherwise, it should be modeled directly within
+ another physical component (e.g., a chassis or another
+ module).";
+ }
+
+ identity port {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of networking port capable of receiving and/or transmitting
+ networking traffic.";
+ }
+
+ identity stack {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of super-container (possibly virtual) intended to group
+ together multiple chassis entities. A stack may be realized
+ by a virtual cable, a real interconnect cable attached to
+ multiple chassis, or multiple interconnect cables. A stack
+ should not be modeled within any other physical components,
+ but a stack may be contained within another stack. Only
+ chassis components should be contained within a stack.";
+ }
+
+ identity cpu {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of central processing unit.";
+ }
+
+ identity energy-object {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of energy object, i.e., it is a piece of equipment that is
+ part of or attached to a communications network that is
+ monitored, it is controlled, or it aids in the management of
+ another device for Energy Management.";
+ }
+
+ identity battery {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of battery.";
+ }
+
+ identity storage-drive {
+ base ianahw:hardware-class;
+ description
+ "This identity is applicable if the hardware class is some sort
+ of component with data storage capability as its main
+ functionality, e.g., hard disk drive (HDD), solid-state device
+ (SSD), solid-state hybrid drive (SSHD), object storage device
+ (OSD), or other.";
+ }
+}
\ No newline at end of file