diff --git a/vendor/google.golang.org/grpc/internal/binarylog/regenerate.sh b/vendor/google.golang.org/grpc/internal/binarylog/regenerate.sh
old mode 100755
new mode 100644
diff --git a/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go b/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go
index 11be7cd..3ee8740 100644
--- a/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go
+++ b/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go
@@ -25,40 +25,11 @@
 )
 
 const (
-	prefix              = "GRPC_GO_"
-	retryStr            = prefix + "RETRY"
-	requireHandshakeStr = prefix + "REQUIRE_HANDSHAKE"
-)
-
-// RequireHandshakeSetting describes the settings for handshaking.
-type RequireHandshakeSetting int
-
-const (
-	// RequireHandshakeOn indicates to wait for handshake before considering a
-	// connection ready/successful.
-	RequireHandshakeOn RequireHandshakeSetting = iota
-	// RequireHandshakeOff indicates to not wait for handshake before
-	// considering a connection ready/successful.
-	RequireHandshakeOff
+	prefix   = "GRPC_GO_"
+	retryStr = prefix + "RETRY"
 )
 
 var (
 	// Retry is set if retry is explicitly enabled via "GRPC_GO_RETRY=on".
 	Retry = strings.EqualFold(os.Getenv(retryStr), "on")
-	// RequireHandshake is set based upon the GRPC_GO_REQUIRE_HANDSHAKE
-	// environment variable.
-	//
-	// Will be removed after the 1.18 release.
-	RequireHandshake = RequireHandshakeOn
 )
-
-func init() {
-	switch strings.ToLower(os.Getenv(requireHandshakeStr)) {
-	case "on":
-		fallthrough
-	default:
-		RequireHandshake = RequireHandshakeOn
-	case "off":
-		RequireHandshake = RequireHandshakeOff
-	}
-}
diff --git a/vendor/google.golang.org/grpc/internal/transport/controlbuf.go b/vendor/google.golang.org/grpc/internal/transport/controlbuf.go
index 204ba15..ddee20b 100644
--- a/vendor/google.golang.org/grpc/internal/transport/controlbuf.go
+++ b/vendor/google.golang.org/grpc/internal/transport/controlbuf.go
@@ -23,6 +23,7 @@
 	"fmt"
 	"runtime"
 	"sync"
+	"sync/atomic"
 
 	"golang.org/x/net/http2"
 	"golang.org/x/net/http2/hpack"
@@ -84,24 +85,40 @@
 // the control buffer of transport. They represent different aspects of
 // control tasks, e.g., flow control, settings, streaming resetting, etc.
 
+// maxQueuedTransportResponseFrames is the most queued "transport response"
+// frames we will buffer before preventing new reads from occurring on the
+// transport.  These are control frames sent in response to client requests,
+// such as RST_STREAM due to bad headers or settings acks.
+const maxQueuedTransportResponseFrames = 50
+
+type cbItem interface {
+	isTransportResponseFrame() bool
+}
+
 // registerStream is used to register an incoming stream with loopy writer.
 type registerStream struct {
 	streamID uint32
 	wq       *writeQuota
 }
 
+func (*registerStream) isTransportResponseFrame() bool { return false }
+
 // headerFrame is also used to register stream on the client-side.
 type headerFrame struct {
 	streamID   uint32
 	hf         []hpack.HeaderField
-	endStream  bool                       // Valid on server side.
-	initStream func(uint32) (bool, error) // Used only on the client side.
+	endStream  bool               // Valid on server side.
+	initStream func(uint32) error // Used only on the client side.
 	onWrite    func()
 	wq         *writeQuota    // write quota for the stream created.
 	cleanup    *cleanupStream // Valid on the server side.
 	onOrphaned func(error)    // Valid on client-side
 }
 
+func (h *headerFrame) isTransportResponseFrame() bool {
+	return h.cleanup != nil && h.cleanup.rst // Results in a RST_STREAM
+}
+
 type cleanupStream struct {
 	streamID uint32
 	rst      bool
@@ -109,6 +126,8 @@
 	onWrite  func()
 }
 
+func (c *cleanupStream) isTransportResponseFrame() bool { return c.rst } // Results in a RST_STREAM
+
 type dataFrame struct {
 	streamID  uint32
 	endStream bool
@@ -119,27 +138,41 @@
 	onEachWrite func()
 }
 
+func (*dataFrame) isTransportResponseFrame() bool { return false }
+
 type incomingWindowUpdate struct {
 	streamID  uint32
 	increment uint32
 }
 
+func (*incomingWindowUpdate) isTransportResponseFrame() bool { return false }
+
 type outgoingWindowUpdate struct {
 	streamID  uint32
 	increment uint32
 }
 
+func (*outgoingWindowUpdate) isTransportResponseFrame() bool {
+	return false // window updates are throttled by thresholds
+}
+
 type incomingSettings struct {
 	ss []http2.Setting
 }
 
+func (*incomingSettings) isTransportResponseFrame() bool { return true } // Results in a settings ACK
+
 type outgoingSettings struct {
 	ss []http2.Setting
 }
 
+func (*outgoingSettings) isTransportResponseFrame() bool { return false }
+
 type incomingGoAway struct {
 }
 
+func (*incomingGoAway) isTransportResponseFrame() bool { return false }
+
 type goAway struct {
 	code      http2.ErrCode
 	debugData []byte
@@ -147,15 +180,21 @@
 	closeConn bool
 }
 
+func (*goAway) isTransportResponseFrame() bool { return false }
+
 type ping struct {
 	ack  bool
 	data [8]byte
 }
 
+func (*ping) isTransportResponseFrame() bool { return true }
+
 type outFlowControlSizeRequest struct {
 	resp chan uint32
 }
 
+func (*outFlowControlSizeRequest) isTransportResponseFrame() bool { return false }
+
 type outStreamState int
 
 const (
@@ -238,6 +277,14 @@
 	consumerWaiting bool
 	list            *itemList
 	err             error
+
+	// transportResponseFrames counts the number of queued items that represent
+	// the response of an action initiated by the peer.  trfChan is created
+	// when transportResponseFrames >= maxQueuedTransportResponseFrames and is
+	// closed and nilled when transportResponseFrames drops below the
+	// threshold.  Both fields are protected by mu.
+	transportResponseFrames int
+	trfChan                 atomic.Value // *chan struct{}
 }
 
 func newControlBuffer(done <-chan struct{}) *controlBuffer {
@@ -248,12 +295,24 @@
 	}
 }
 
-func (c *controlBuffer) put(it interface{}) error {
+// throttle blocks if there are too many incomingSettings/cleanupStreams in the
+// controlbuf.
+func (c *controlBuffer) throttle() {
+	ch, _ := c.trfChan.Load().(*chan struct{})
+	if ch != nil {
+		select {
+		case <-*ch:
+		case <-c.done:
+		}
+	}
+}
+
+func (c *controlBuffer) put(it cbItem) error {
 	_, err := c.executeAndPut(nil, it)
 	return err
 }
 
-func (c *controlBuffer) executeAndPut(f func(it interface{}) bool, it interface{}) (bool, error) {
+func (c *controlBuffer) executeAndPut(f func(it interface{}) bool, it cbItem) (bool, error) {
 	var wakeUp bool
 	c.mu.Lock()
 	if c.err != nil {
@@ -271,6 +330,15 @@
 		c.consumerWaiting = false
 	}
 	c.list.enqueue(it)
+	if it.isTransportResponseFrame() {
+		c.transportResponseFrames++
+		if c.transportResponseFrames == maxQueuedTransportResponseFrames {
+			// We are adding the frame that puts us over the threshold; create
+			// a throttling channel.
+			ch := make(chan struct{})
+			c.trfChan.Store(&ch)
+		}
+	}
 	c.mu.Unlock()
 	if wakeUp {
 		select {
@@ -304,7 +372,17 @@
 			return nil, c.err
 		}
 		if !c.list.isEmpty() {
-			h := c.list.dequeue()
+			h := c.list.dequeue().(cbItem)
+			if h.isTransportResponseFrame() {
+				if c.transportResponseFrames == maxQueuedTransportResponseFrames {
+					// We are removing the frame that put us over the
+					// threshold; close and clear the throttling channel.
+					ch := c.trfChan.Load().(*chan struct{})
+					close(*ch)
+					c.trfChan.Store((*chan struct{})(nil))
+				}
+				c.transportResponseFrames--
+			}
 			c.mu.Unlock()
 			return h, nil
 		}
@@ -559,21 +637,17 @@
 
 func (l *loopyWriter) originateStream(str *outStream) error {
 	hdr := str.itl.dequeue().(*headerFrame)
-	sendPing, err := hdr.initStream(str.id)
-	if err != nil {
+	if err := hdr.initStream(str.id); err != nil {
 		if err == ErrConnClosing {
 			return err
 		}
 		// Other errors(errStreamDrain) need not close transport.
 		return nil
 	}
-	if err = l.writeHeader(str.id, hdr.endStream, hdr.hf, hdr.onWrite); err != nil {
+	if err := l.writeHeader(str.id, hdr.endStream, hdr.hf, hdr.onWrite); err != nil {
 		return err
 	}
 	l.estdStreams[str.id] = str
-	if sendPing {
-		return l.pingHandler(&ping{data: [8]byte{}})
-	}
 	return nil
 }
 
diff --git a/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
index 5ea997a..f262edd 100644
--- a/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
+++ b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
@@ -149,6 +149,7 @@
 		n = uint32(math.MaxInt32)
 	}
 	f.mu.Lock()
+	defer f.mu.Unlock()
 	// estSenderQuota is the receiver's view of the maximum number of bytes the sender
 	// can send without a window update.
 	estSenderQuota := int32(f.limit - (f.pendingData + f.pendingUpdate))
@@ -169,10 +170,8 @@
 			// is padded; We will fallback on the current available window(at least a 1/4th of the limit).
 			f.delta = n
 		}
-		f.mu.Unlock()
 		return f.delta
 	}
-	f.mu.Unlock()
 	return 0
 }
 
diff --git a/vendor/google.golang.org/grpc/internal/transport/http2_client.go b/vendor/google.golang.org/grpc/internal/transport/http2_client.go
index c96178d..9bd8c27 100644
--- a/vendor/google.golang.org/grpc/internal/transport/http2_client.go
+++ b/vendor/google.golang.org/grpc/internal/transport/http2_client.go
@@ -62,8 +62,6 @@
 	// goAway is closed to notify the upper layer (i.e., addrConn.transportMonitor)
 	// that the server sent GoAway on this transport.
 	goAway chan struct{}
-	// awakenKeepalive is used to wake up keepalive when after it has gone dormant.
-	awakenKeepalive chan struct{}
 
 	framer *framer
 	// controlBuf delivers all the control related tasks (e.g., window
@@ -110,6 +108,16 @@
 	// goAwayReason records the http2.ErrCode and debug data received with the
 	// GoAway frame.
 	goAwayReason GoAwayReason
+	// A condition variable used to signal when the keepalive goroutine should
+	// go dormant. The condition for dormancy is based on the number of active
+	// streams and the `PermitWithoutStream` keepalive client parameter. And
+	// since the number of active streams is guarded by the above mutex, we use
+	// the same for this condition variable as well.
+	kpDormancyCond *sync.Cond
+	// A boolean to track whether the keepalive goroutine is dormant or not.
+	// This is checked before attempting to signal the above condition
+	// variable.
+	kpDormant bool
 
 	// Fields below are for channelz metric collection.
 	channelzID int64 // channelz unique identification number
@@ -232,7 +240,6 @@
 		readerDone:            make(chan struct{}),
 		writerDone:            make(chan struct{}),
 		goAway:                make(chan struct{}),
-		awakenKeepalive:       make(chan struct{}, 1),
 		framer:                newFramer(conn, writeBufSize, readBufSize, maxHeaderListSize),
 		fc:                    &trInFlow{limit: uint32(icwz)},
 		scheme:                scheme,
@@ -264,9 +271,6 @@
 			updateFlowControl: t.updateFlowControl,
 		}
 	}
-	// Make sure awakenKeepalive can't be written upon.
-	// keepalive routine will make it writable, if need be.
-	t.awakenKeepalive <- struct{}{}
 	if t.statsHandler != nil {
 		t.ctx = t.statsHandler.TagConn(t.ctx, &stats.ConnTagInfo{
 			RemoteAddr: t.remoteAddr,
@@ -281,6 +285,7 @@
 		t.channelzID = channelz.RegisterNormalSocket(t, opts.ChannelzParentID, fmt.Sprintf("%s -> %s", t.localAddr, t.remoteAddr))
 	}
 	if t.keepaliveEnabled {
+		t.kpDormancyCond = sync.NewCond(&t.mu)
 		go t.keepalive()
 	}
 	// Start the reader goroutine for incoming message. Each transport has
@@ -493,6 +498,9 @@
 }
 
 func (t *http2Client) getTrAuthData(ctx context.Context, audience string) (map[string]string, error) {
+	if len(t.perRPCCreds) == 0 {
+		return nil, nil
+	}
 	authData := map[string]string{}
 	for _, c := range t.perRPCCreds {
 		data, err := c.GetRequestMetadata(ctx, audience)
@@ -513,7 +521,7 @@
 }
 
 func (t *http2Client) getCallAuthData(ctx context.Context, audience string, callHdr *CallHdr) (map[string]string, error) {
-	callAuthData := map[string]string{}
+	var callAuthData map[string]string
 	// Check if credentials.PerRPCCredentials were provided via call options.
 	// Note: if these credentials are provided both via dial options and call
 	// options, then both sets of credentials will be applied.
@@ -525,6 +533,7 @@
 		if err != nil {
 			return nil, status.Errorf(codes.Internal, "transport: %v", err)
 		}
+		callAuthData = make(map[string]string, len(data))
 		for k, v := range data {
 			// Capital header names are illegal in HTTP/2
 			k = strings.ToLower(k)
@@ -556,12 +565,11 @@
 		if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) {
 			close(s.headerChan)
 		}
-
 	}
 	hdr := &headerFrame{
 		hf:        headerFields,
 		endStream: false,
-		initStream: func(id uint32) (bool, error) {
+		initStream: func(id uint32) error {
 			t.mu.Lock()
 			if state := t.state; state != reachable {
 				t.mu.Unlock()
@@ -571,29 +579,19 @@
 					err = ErrConnClosing
 				}
 				cleanup(err)
-				return false, err
+				return err
 			}
 			t.activeStreams[id] = s
 			if channelz.IsOn() {
 				atomic.AddInt64(&t.czData.streamsStarted, 1)
 				atomic.StoreInt64(&t.czData.lastStreamCreatedTime, time.Now().UnixNano())
 			}
-			var sendPing bool
-			// If the number of active streams change from 0 to 1, then check if keepalive
-			// has gone dormant. If so, wake it up.
-			if len(t.activeStreams) == 1 && t.keepaliveEnabled {
-				select {
-				case t.awakenKeepalive <- struct{}{}:
-					sendPing = true
-					// Fill the awakenKeepalive channel again as this channel must be
-					// kept non-writable except at the point that the keepalive()
-					// goroutine is waiting either to be awaken or shutdown.
-					t.awakenKeepalive <- struct{}{}
-				default:
-				}
+			// If the keepalive goroutine has gone dormant, wake it up.
+			if t.kpDormant {
+				t.kpDormancyCond.Signal()
 			}
 			t.mu.Unlock()
-			return sendPing, nil
+			return nil
 		},
 		onOrphaned: cleanup,
 		wq:         s.wq,
@@ -769,9 +767,17 @@
 		t.mu.Unlock()
 		return nil
 	}
+	// Call t.onClose before setting the state to closing to prevent the client
+	// from attempting to create new streams ASAP.
+	t.onClose()
 	t.state = closing
 	streams := t.activeStreams
 	t.activeStreams = nil
+	if t.kpDormant {
+		// If the keepalive goroutine is blocked on this condition variable, we
+		// should unblock it so that the goroutine eventually exits.
+		t.kpDormancyCond.Signal()
+	}
 	t.mu.Unlock()
 	t.controlBuf.finish()
 	t.cancel()
@@ -789,7 +795,6 @@
 		}
 		t.statsHandler.HandleConn(t.ctx, connEnd)
 	}
-	t.onClose()
 	return err
 }
 
@@ -848,11 +853,11 @@
 	return t.controlBuf.put(df)
 }
 
-func (t *http2Client) getStream(f http2.Frame) (*Stream, bool) {
+func (t *http2Client) getStream(f http2.Frame) *Stream {
 	t.mu.Lock()
-	defer t.mu.Unlock()
-	s, ok := t.activeStreams[f.Header().StreamID]
-	return s, ok
+	s := t.activeStreams[f.Header().StreamID]
+	t.mu.Unlock()
+	return s
 }
 
 // adjustWindow sends out extra window update over the initial window size
@@ -932,8 +937,8 @@
 		t.controlBuf.put(bdpPing)
 	}
 	// Select the right stream to dispatch.
-	s, ok := t.getStream(f)
-	if !ok {
+	s := t.getStream(f)
+	if s == nil {
 		return
 	}
 	if size > 0 {
@@ -964,8 +969,8 @@
 }
 
 func (t *http2Client) handleRSTStream(f *http2.RSTStreamFrame) {
-	s, ok := t.getStream(f)
-	if !ok {
+	s := t.getStream(f)
+	if s == nil {
 		return
 	}
 	if f.ErrCode == http2.ErrCodeRefusedStream {
@@ -978,9 +983,9 @@
 		statusCode = codes.Unknown
 	}
 	if statusCode == codes.Canceled {
-		// Our deadline was already exceeded, and that was likely the cause of
-		// this cancelation.  Alter the status code accordingly.
-		if d, ok := s.ctx.Deadline(); ok && d.After(time.Now()) {
+		if d, ok := s.ctx.Deadline(); ok && !d.After(time.Now()) {
+			// Our deadline was already exceeded, and that was likely the cause
+			// of this cancelation.  Alter the status code accordingly.
 			statusCode = codes.DeadlineExceeded
 		}
 	}
@@ -1085,11 +1090,12 @@
 	default:
 		t.setGoAwayReason(f)
 		close(t.goAway)
-		t.state = draining
 		t.controlBuf.put(&incomingGoAway{})
-
-		// This has to be a new goroutine because we're still using the current goroutine to read in the transport.
+		// Notify the clientconn about the GOAWAY before we set the state to
+		// draining, to allow the client to stop attempting to create streams
+		// before disallowing new streams on this connection.
 		t.onGoAway(t.goAwayReason)
+		t.state = draining
 	}
 	// All streams with IDs greater than the GoAwayId
 	// and smaller than the previous GoAway ID should be killed.
@@ -1141,8 +1147,8 @@
 
 // operateHeaders takes action on the decoded headers.
 func (t *http2Client) operateHeaders(frame *http2.MetaHeadersFrame) {
-	s, ok := t.getStream(frame)
-	if !ok {
+	s := t.getStream(frame)
+	if s == nil {
 		return
 	}
 	endStream := frame.StreamEnded()
@@ -1239,6 +1245,7 @@
 
 	// loop to keep reading incoming messages on this transport.
 	for {
+		t.controlBuf.throttle()
 		frame, err := t.framer.fr.ReadFrame()
 		if t.keepaliveEnabled {
 			atomic.CompareAndSwapUint32(&t.activity, 0, 1)
@@ -1296,29 +1303,32 @@
 				timer.Reset(t.kp.Time)
 				continue
 			}
-			// Check if keepalive should go dormant.
 			t.mu.Lock()
-			if len(t.activeStreams) < 1 && !t.kp.PermitWithoutStream {
-				// Make awakenKeepalive writable.
-				<-t.awakenKeepalive
+			if t.state == closing {
+				// If the transport is closing, we should exit from the
+				// keepalive goroutine here. If not, we could have a race
+				// between the call to Signal() from Close() and the call to
+				// Wait() here, whereby the keepalive goroutine ends up
+				// blocking on the condition variable which will never be
+				// signalled again.
 				t.mu.Unlock()
-				select {
-				case <-t.awakenKeepalive:
-					// If the control gets here a ping has been sent
-					// need to reset the timer with keepalive.Timeout.
-				case <-t.ctx.Done():
-					return
-				}
-			} else {
-				t.mu.Unlock()
-				if channelz.IsOn() {
-					atomic.AddInt64(&t.czData.kpCount, 1)
-				}
-				// Send ping.
-				t.controlBuf.put(p)
+				return
 			}
+			if len(t.activeStreams) < 1 && !t.kp.PermitWithoutStream {
+				t.kpDormant = true
+				t.kpDormancyCond.Wait()
+			}
+			t.kpDormant = false
+			t.mu.Unlock()
 
-			// By the time control gets here a ping has been sent one way or the other.
+			if channelz.IsOn() {
+				atomic.AddInt64(&t.czData.kpCount, 1)
+			}
+			// We get here either because we were dormant and a new stream was
+			// created which unblocked the Wait() call, or because the
+			// keepalive timer expired. In both cases, we need to send a ping.
+			t.controlBuf.put(p)
+
 			timer.Reset(t.kp.Timeout)
 			select {
 			case <-timer.C:
@@ -1326,6 +1336,7 @@
 					timer.Reset(t.kp.Time)
 					continue
 				}
+				infof("transport: closing client transport due to idleness.")
 				t.Close()
 				return
 			case <-t.ctx.Done():
diff --git a/vendor/google.golang.org/grpc/internal/transport/http2_server.go b/vendor/google.golang.org/grpc/internal/transport/http2_server.go
index 150b73e..33686a1 100644
--- a/vendor/google.golang.org/grpc/internal/transport/http2_server.go
+++ b/vendor/google.golang.org/grpc/internal/transport/http2_server.go
@@ -65,8 +65,7 @@
 // http2Server implements the ServerTransport interface with HTTP2.
 type http2Server struct {
 	ctx         context.Context
-	ctxDone     <-chan struct{} // Cache the context.Done() chan
-	cancel      context.CancelFunc
+	done        chan struct{}
 	conn        net.Conn
 	loopy       *loopyWriter
 	readerDone  chan struct{} // sync point to enable testing.
@@ -138,7 +137,10 @@
 	}
 	framer := newFramer(conn, writeBufSize, readBufSize, maxHeaderListSize)
 	// Send initial settings as connection preface to client.
-	var isettings []http2.Setting
+	isettings := []http2.Setting{{
+		ID:  http2.SettingMaxFrameSize,
+		Val: http2MaxFrameLen,
+	}}
 	// TODO(zhaoq): Have a better way to signal "no limit" because 0 is
 	// permitted in the HTTP2 spec.
 	maxStreams := config.MaxStreams
@@ -203,11 +205,10 @@
 	if kep.MinTime == 0 {
 		kep.MinTime = defaultKeepalivePolicyMinTime
 	}
-	ctx, cancel := context.WithCancel(context.Background())
+	done := make(chan struct{})
 	t := &http2Server{
-		ctx:               ctx,
-		cancel:            cancel,
-		ctxDone:           ctx.Done(),
+		ctx:               context.Background(),
+		done:              done,
 		conn:              conn,
 		remoteAddr:        conn.RemoteAddr(),
 		localAddr:         conn.LocalAddr(),
@@ -228,7 +229,7 @@
 		czData:            new(channelzData),
 		bufferPool:        newBufferPool(),
 	}
-	t.controlBuf = newControlBuffer(t.ctxDone)
+	t.controlBuf = newControlBuffer(t.done)
 	if dynamicWindow {
 		t.bdpEst = &bdpEstimator{
 			bdp:               initialWindowSize,
@@ -359,12 +360,14 @@
 				rstCode:  http2.ErrCodeRefusedStream,
 				onWrite:  func() {},
 			})
+			s.cancel()
 			return false
 		}
 	}
 	t.mu.Lock()
 	if t.state != reachable {
 		t.mu.Unlock()
+		s.cancel()
 		return false
 	}
 	if uint32(len(t.activeStreams)) >= t.maxStreams {
@@ -375,12 +378,14 @@
 			rstCode:  http2.ErrCodeRefusedStream,
 			onWrite:  func() {},
 		})
+		s.cancel()
 		return false
 	}
 	if streamID%2 != 1 || streamID <= t.maxStreamID {
 		t.mu.Unlock()
 		// illegal gRPC stream id.
 		errorf("transport: http2Server.HandleStreams received an illegal stream id: %v", streamID)
+		s.cancel()
 		return true
 	}
 	t.maxStreamID = streamID
@@ -436,6 +441,7 @@
 func (t *http2Server) HandleStreams(handle func(*Stream), traceCtx func(context.Context, string) context.Context) {
 	defer close(t.readerDone)
 	for {
+		t.controlBuf.throttle()
 		frame, err := t.framer.fr.ReadFrame()
 		atomic.StoreUint32(&t.activity, 1)
 		if err != nil {
@@ -766,6 +772,10 @@
 	return nil
 }
 
+func (t *http2Server) setResetPingStrikes() {
+	atomic.StoreUint32(&t.resetPingStrikes, 1)
+}
+
 func (t *http2Server) writeHeaderLocked(s *Stream) error {
 	// TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields
 	// first and create a slice of that exact size.
@@ -780,9 +790,7 @@
 		streamID:  s.id,
 		hf:        headerFields,
 		endStream: false,
-		onWrite: func() {
-			atomic.StoreUint32(&t.resetPingStrikes, 1)
-		},
+		onWrite:   t.setResetPingStrikes,
 	})
 	if !success {
 		if err != nil {
@@ -842,9 +850,7 @@
 		streamID:  s.id,
 		hf:        headerFields,
 		endStream: true,
-		onWrite: func() {
-			atomic.StoreUint32(&t.resetPingStrikes, 1)
-		},
+		onWrite:   t.setResetPingStrikes,
 	}
 	s.hdrMu.Unlock()
 	success, err := t.controlBuf.execute(t.checkForHeaderListSize, trailingHeader)
@@ -881,7 +887,7 @@
 			// TODO(mmukhi, dfawley): Should the server write also return io.EOF?
 			s.cancel()
 			select {
-			case <-t.ctx.Done():
+			case <-t.done:
 				return ErrConnClosing
 			default:
 			}
@@ -896,16 +902,14 @@
 	hdr = append(hdr, data[:emptyLen]...)
 	data = data[emptyLen:]
 	df := &dataFrame{
-		streamID: s.id,
-		h:        hdr,
-		d:        data,
-		onEachWrite: func() {
-			atomic.StoreUint32(&t.resetPingStrikes, 1)
-		},
+		streamID:    s.id,
+		h:           hdr,
+		d:           data,
+		onEachWrite: t.setResetPingStrikes,
 	}
 	if err := s.wq.get(int32(len(hdr) + len(data))); err != nil {
 		select {
-		case <-t.ctx.Done():
+		case <-t.done:
 			return ErrConnClosing
 		default:
 		}
@@ -967,10 +971,11 @@
 			select {
 			case <-maxAge.C:
 				// Close the connection after grace period.
+				infof("transport: closing server transport due to maximum connection age.")
 				t.Close()
 				// Resetting the timer so that the clean-up doesn't deadlock.
 				maxAge.Reset(infinity)
-			case <-t.ctx.Done():
+			case <-t.done:
 			}
 			return
 		case <-keepalive.C:
@@ -980,6 +985,7 @@
 				continue
 			}
 			if pingSent {
+				infof("transport: closing server transport due to idleness.")
 				t.Close()
 				// Resetting the timer so that the clean-up doesn't deadlock.
 				keepalive.Reset(infinity)
@@ -991,7 +997,7 @@
 			}
 			t.controlBuf.put(p)
 			keepalive.Reset(t.kp.Timeout)
-		case <-t.ctx.Done():
+		case <-t.done:
 			return
 		}
 	}
@@ -1011,7 +1017,7 @@
 	t.activeStreams = nil
 	t.mu.Unlock()
 	t.controlBuf.finish()
-	t.cancel()
+	close(t.done)
 	err := t.conn.Close()
 	if channelz.IsOn() {
 		channelz.RemoveEntry(t.channelzID)
@@ -1151,7 +1157,7 @@
 		select {
 		case <-t.drainChan:
 		case <-timer.C:
-		case <-t.ctx.Done():
+		case <-t.done:
 			return
 		}
 		t.controlBuf.put(&goAway{code: g.code, debugData: g.debugData})
@@ -1201,7 +1207,7 @@
 	select {
 	case sz := <-resp:
 		return int64(sz)
-	case <-t.ctxDone:
+	case <-t.done:
 		return -1
 	case <-timer.C:
 		return -2
diff --git a/vendor/google.golang.org/grpc/internal/transport/http_util.go b/vendor/google.golang.org/grpc/internal/transport/http_util.go
index 9d21286..8f5f334 100644
--- a/vendor/google.golang.org/grpc/internal/transport/http_util.go
+++ b/vendor/google.golang.org/grpc/internal/transport/http_util.go
@@ -667,6 +667,7 @@
 		writer: w,
 		fr:     http2.NewFramer(w, r),
 	}
+	f.fr.SetMaxReadFrameSize(http2MaxFrameLen)
 	// Opt-in to Frame reuse API on framer to reduce garbage.
 	// Frames aren't safe to read from after a subsequent call to ReadFrame.
 	f.fr.SetReuseFrames()
diff --git a/vendor/google.golang.org/grpc/internal/transport/transport.go b/vendor/google.golang.org/grpc/internal/transport/transport.go
index 0f33c9c..1c1d106 100644
--- a/vendor/google.golang.org/grpc/internal/transport/transport.go
+++ b/vendor/google.golang.org/grpc/internal/transport/transport.go
@@ -184,6 +184,19 @@
 	// r.readAdditional acts on that message and returns the necessary error.
 	select {
 	case <-r.ctxDone:
+		// Note that this adds the ctx error to the end of recv buffer, and
+		// reads from the head. This will delay the error until recv buffer is
+		// empty, thus will delay ctx cancellation in Recv().
+		//
+		// It's done this way to fix a race between ctx cancel and trailer. The
+		// race was, stream.Recv() may return ctx error if ctxDone wins the
+		// race, but stream.Trailer() may return a non-nil md because the stream
+		// was not marked as done when trailer is received. This closeStream
+		// call will mark stream as done, thus fix the race.
+		//
+		// TODO: delaying ctx error seems like a unnecessary side effect. What
+		// we really want is to mark the stream as done, and return ctx error
+		// faster.
 		r.closeStream(ContextErr(r.ctx.Err()))
 		m := <-r.recv.get()
 		return r.readAdditional(m, p)
@@ -298,6 +311,14 @@
 	}
 	select {
 	case <-s.ctx.Done():
+		// We prefer success over failure when reading messages because we delay
+		// context error in stream.Read(). To keep behavior consistent, we also
+		// prefer success here.
+		select {
+		case <-s.headerChan:
+			return nil
+		default:
+		}
 		return ContextErr(s.ctx.Err())
 	case <-s.headerChan:
 		return nil