diff --git a/vendor/go.etcd.io/etcd/raft/confchange/confchange.go b/vendor/go.etcd.io/etcd/raft/confchange/confchange.go
index fd75aed..a0dc486 100644
--- a/vendor/go.etcd.io/etcd/raft/confchange/confchange.go
+++ b/vendor/go.etcd.io/etcd/raft/confchange/confchange.go
@@ -41,12 +41,12 @@
 // to
 //     (1 2 3)&&(1 2 3).
 //
-// The supplied ConfChanges are then applied to the incoming majority config,
+// The supplied changes are then applied to the incoming majority config,
 // resulting in a joint configuration that in terms of the Raft thesis[1]
 // (Section 4.3) corresponds to `C_{new,old}`.
 //
 // [1]: https://github.com/ongardie/dissertation/blob/master/online-trim.pdf
-func (c Changer) EnterJoint(ccs ...pb.ConfChange) (tracker.Config, tracker.ProgressMap, error) {
+func (c Changer) EnterJoint(autoLeave bool, ccs ...pb.ConfChangeSingle) (tracker.Config, tracker.ProgressMap, error) {
 	cfg, prs, err := c.checkAndCopy()
 	if err != nil {
 		return c.err(err)
@@ -62,10 +62,7 @@
 		return c.err(err)
 	}
 	// Clear the outgoing config.
-	{
-		*outgoingPtr(&cfg.Voters) = quorum.MajorityConfig{}
-
-	}
+	*outgoingPtr(&cfg.Voters) = quorum.MajorityConfig{}
 	// Copy incoming to outgoing.
 	for id := range incoming(cfg.Voters) {
 		outgoing(cfg.Voters)[id] = struct{}{}
@@ -74,7 +71,7 @@
 	if err := c.apply(&cfg, prs, ccs...); err != nil {
 		return c.err(err)
 	}
-
+	cfg.AutoLeave = autoLeave
 	return checkAndReturn(cfg, prs)
 }
 
@@ -120,6 +117,7 @@
 		}
 	}
 	*outgoingPtr(&cfg.Voters) = nil
+	cfg.AutoLeave = false
 
 	return checkAndReturn(cfg, prs)
 }
@@ -129,7 +127,7 @@
 // will return an error if that is not the case, if the resulting quorum is
 // zero, or if the configuration is in a joint state (i.e. if there is an
 // outgoing configuration).
-func (c Changer) Simple(ccs ...pb.ConfChange) (tracker.Config, tracker.ProgressMap, error) {
+func (c Changer) Simple(ccs ...pb.ConfChangeSingle) (tracker.Config, tracker.ProgressMap, error) {
 	cfg, prs, err := c.checkAndCopy()
 	if err != nil {
 		return c.err(err)
@@ -142,7 +140,7 @@
 		return c.err(err)
 	}
 	if n := symdiff(incoming(c.Tracker.Voters), incoming(cfg.Voters)); n > 1 {
-		return tracker.Config{}, nil, errors.New("more than voter changed without entering joint config")
+		return tracker.Config{}, nil, errors.New("more than one voter changed without entering joint config")
 	}
 	if err := checkInvariants(cfg, prs); err != nil {
 		return tracker.Config{}, tracker.ProgressMap{}, nil
@@ -151,14 +149,14 @@
 	return checkAndReturn(cfg, prs)
 }
 
-// apply a ConfChange to the configuration. By convention, changes to voters are
+// apply a change to the configuration. By convention, changes to voters are
 // always made to the incoming majority config Voters[0]. Voters[1] is either
 // empty or preserves the outgoing majority configuration while in a joint state.
-func (c Changer) apply(cfg *tracker.Config, prs tracker.ProgressMap, ccs ...pb.ConfChange) error {
+func (c Changer) apply(cfg *tracker.Config, prs tracker.ProgressMap, ccs ...pb.ConfChangeSingle) error {
 	for _, cc := range ccs {
 		if cc.NodeID == 0 {
 			// etcd replaces the NodeID with zero if it decides (downstream of
-			// raft) to not apply a ConfChange, so we have to have explicit code
+			// raft) to not apply a change, so we have to have explicit code
 			// here to ignore these.
 			continue
 		}
@@ -259,11 +257,15 @@
 		nilAwareAdd(&cfg.Learners, id)
 	}
 	prs[id] = &tracker.Progress{
-		// We initialize Progress.Next with lastIndex+1 so that the peer will be
-		// probed without an index first.
+		// Initializing the Progress with the last index means that the follower
+		// can be probed (with the last index).
 		//
-		// TODO(tbg): verify that, this is just my best guess.
-		Next:      c.LastIndex + 1,
+		// TODO(tbg): seems awfully optimistic. Using the first index would be
+		// better. The general expectation here is that the follower has no log
+		// at all (and will thus likely need a snapshot), though the app may
+		// have applied a snapshot out of band before adding the replica (thus
+		// making the first index the better choice).
+		Next:      c.LastIndex,
 		Match:     0,
 		Inflights: tracker.NewInflights(c.Tracker.MaxInflight),
 		IsLearner: isLearner,
@@ -327,6 +329,9 @@
 		if cfg.LearnersNext != nil {
 			return fmt.Errorf("LearnersNext must be nil when not joint")
 		}
+		if cfg.AutoLeave {
+			return fmt.Errorf("AutoLeave must be false when not joint")
+		}
 	}
 
 	return nil
@@ -408,7 +413,7 @@
 
 // Describe prints the type and NodeID of the configuration changes as a
 // space-delimited string.
-func Describe(ccs ...pb.ConfChange) string {
+func Describe(ccs ...pb.ConfChangeSingle) string {
 	var buf strings.Builder
 	for _, cc := range ccs {
 		if buf.Len() > 0 {
diff --git a/vendor/go.etcd.io/etcd/raft/confchange/restore.go b/vendor/go.etcd.io/etcd/raft/confchange/restore.go
new file mode 100644
index 0000000..724068d
--- /dev/null
+++ b/vendor/go.etcd.io/etcd/raft/confchange/restore.go
@@ -0,0 +1,155 @@
+// Copyright 2019 The etcd Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package confchange
+
+import (
+	pb "go.etcd.io/etcd/raft/raftpb"
+	"go.etcd.io/etcd/raft/tracker"
+)
+
+// toConfChangeSingle translates a conf state into 1) a slice of operations creating
+// first the config that will become the outgoing one, and then the incoming one, and
+// b) another slice that, when applied to the config resulted from 1), represents the
+// ConfState.
+func toConfChangeSingle(cs pb.ConfState) (out []pb.ConfChangeSingle, in []pb.ConfChangeSingle) {
+	// Example to follow along this code:
+	// voters=(1 2 3) learners=(5) outgoing=(1 2 4 6) learners_next=(4)
+	//
+	// This means that before entering the joint config, the configuration
+	// had voters (1 2 4) and perhaps some learners that are already gone.
+	// The new set of voters is (1 2 3), i.e. (1 2) were kept around, and (4 6)
+	// are no longer voters; however 4 is poised to become a learner upon leaving
+	// the joint state.
+	// We can't tell whether 5 was a learner before entering the joint config,
+	// but it doesn't matter (we'll pretend that it wasn't).
+	//
+	// The code below will construct
+	// outgoing = add 1; add 2; add 4; add 6
+	// incoming = remove 1; remove 2; remove 4; remove 6
+	//            add 1;    add 2;    add 3;
+	//            add-learner 5;
+	//            add-learner 4;
+	//
+	// So, when starting with an empty config, after applying 'outgoing' we have
+	//
+	//   quorum=(1 2 4 6)
+	//
+	// From which we enter a joint state via 'incoming'
+	//
+	//   quorum=(1 2 3)&&(1 2 4 6) learners=(5) learners_next=(4)
+	//
+	// as desired.
+
+	for _, id := range cs.VotersOutgoing {
+		// If there are outgoing voters, first add them one by one so that the
+		// (non-joint) config has them all.
+		out = append(out, pb.ConfChangeSingle{
+			Type:   pb.ConfChangeAddNode,
+			NodeID: id,
+		})
+
+	}
+
+	// We're done constructing the outgoing slice, now on to the incoming one
+	// (which will apply on top of the config created by the outgoing slice).
+
+	// First, we'll remove all of the outgoing voters.
+	for _, id := range cs.VotersOutgoing {
+		in = append(in, pb.ConfChangeSingle{
+			Type:   pb.ConfChangeRemoveNode,
+			NodeID: id,
+		})
+	}
+	// Then we'll add the incoming voters and learners.
+	for _, id := range cs.Voters {
+		in = append(in, pb.ConfChangeSingle{
+			Type:   pb.ConfChangeAddNode,
+			NodeID: id,
+		})
+	}
+	for _, id := range cs.Learners {
+		in = append(in, pb.ConfChangeSingle{
+			Type:   pb.ConfChangeAddLearnerNode,
+			NodeID: id,
+		})
+	}
+	// Same for LearnersNext; these are nodes we want to be learners but which
+	// are currently voters in the outgoing config.
+	for _, id := range cs.LearnersNext {
+		in = append(in, pb.ConfChangeSingle{
+			Type:   pb.ConfChangeAddLearnerNode,
+			NodeID: id,
+		})
+	}
+	return out, in
+}
+
+func chain(chg Changer, ops ...func(Changer) (tracker.Config, tracker.ProgressMap, error)) (tracker.Config, tracker.ProgressMap, error) {
+	for _, op := range ops {
+		cfg, prs, err := op(chg)
+		if err != nil {
+			return tracker.Config{}, nil, err
+		}
+		chg.Tracker.Config = cfg
+		chg.Tracker.Progress = prs
+	}
+	return chg.Tracker.Config, chg.Tracker.Progress, nil
+}
+
+// Restore takes a Changer (which must represent an empty configuration), and
+// runs a sequence of changes enacting the configuration described in the
+// ConfState.
+//
+// TODO(tbg) it's silly that this takes a Changer. Unravel this by making sure
+// the Changer only needs a ProgressMap (not a whole Tracker) at which point
+// this can just take LastIndex and MaxInflight directly instead and cook up
+// the results from that alone.
+func Restore(chg Changer, cs pb.ConfState) (tracker.Config, tracker.ProgressMap, error) {
+	outgoing, incoming := toConfChangeSingle(cs)
+
+	var ops []func(Changer) (tracker.Config, tracker.ProgressMap, error)
+
+	if len(outgoing) == 0 {
+		// No outgoing config, so just apply the incoming changes one by one.
+		for _, cc := range incoming {
+			cc := cc // loop-local copy
+			ops = append(ops, func(chg Changer) (tracker.Config, tracker.ProgressMap, error) {
+				return chg.Simple(cc)
+			})
+		}
+	} else {
+		// The ConfState describes a joint configuration.
+		//
+		// First, apply all of the changes of the outgoing config one by one, so
+		// that it temporarily becomes the incoming active config. For example,
+		// if the config is (1 2 3)&(2 3 4), this will establish (2 3 4)&().
+		for _, cc := range outgoing {
+			cc := cc // loop-local copy
+			ops = append(ops, func(chg Changer) (tracker.Config, tracker.ProgressMap, error) {
+				return chg.Simple(cc)
+			})
+		}
+		// Now enter the joint state, which rotates the above additions into the
+		// outgoing config, and adds the incoming config in. Continuing the
+		// example above, we'd get (1 2 3)&(2 3 4), i.e. the incoming operations
+		// would be removing 2,3,4 and then adding in 1,2,3 while transitioning
+		// into a joint state.
+		ops = append(ops, func(chg Changer) (tracker.Config, tracker.ProgressMap, error) {
+			return chg.EnterJoint(cs.AutoLeave, incoming...)
+		})
+	}
+
+	return chain(chg, ops...)
+}