/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation

 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at

 * http://www.apache.org/licenses/LICENSE-2.0

 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// CircuitPackClassID is the 16-bit ID for the OMCI
// Managed entity Circuit pack
const CircuitPackClassID ClassID = ClassID(6)

var circuitpackBME *ManagedEntityDefinition

// CircuitPack (class ID #6)
//	This ME models a real or virtual circuit pack that is equipped in a real or virtual ONU slot.
//	For ONUs with integrated interfaces, this ME may be used to distinguish available types of
//	interfaces (the port-mapping package is another way).
//
//	For ONUs with integrated interfaces, the ONU automatically creates an instance of this ME for
//	each instance of the virtual cardholder ME. The ONU also creates an instance of this ME when the
//	OLT provisions the cardholder to expect a circuit pack, i.e., when the OLT sets the expected
//	plug-in unit type or equipment ID of the cardholder to a circuit pack type, as defined in Table
//	9.1.5-1. The ONU also creates an instance of this ME when a circuit pack is installed in a
//	cardholder whose expected plug-in unit type is 255-= plugandplay, and whose equipment ID is not
//	provisioned. Finally, when the cardholder is provisioned for plug-and-play, an instance of this
//	ME can be created at the request of the OLT.
//
//	The ONU deletes an instance of this ME when the OLT de-provisions the circuit pack (i.e., when
//	the OLT sets the expected plug-in unit type or equipment ID of the cardholder to 0-= no LIM).
//	The ONU also deletes an instance of this ME on request of the OLT if the expected plug-in unit
//	type attribute of the corresponding cardholder is equal to 255, plug-and-play, and the expected
//	equipment ID is blank (a string of all spaces). ONUs with integrated interfaces do not delete
//	circuit pack instances.
//
//	NOTE - Creation and deletion by the OLT is retained for backward compatibility.
//
//	Relationships
//		An instance of this ME is contained by an instance of the cardholder ME.
//
//	Attributes
//		Managed Entity Id
//			Managed entity ID: This attribute uniquely identifies each instance of this ME. Its value is the
//			same as that of the cardholder ME containing this circuit pack instance. (R, setbycreate if
//			applicable) (mandatory) (2-bytes)
//
//		Type
//			Type:	This attribute identifies the circuit pack type. This attribute is a code as defined in
//			Table 9.1.5-1. The value 255 means unknown or undefined, i.e., the inserted circuit pack is not
//			recognized by the ONU or is not mapped to an entry in Table 9.1.5-1. In the latter case, the
//			equipment ID attribute may contain inventory information. Upon autonomous ME instantiation, the
//			ONU sets this attribute to 0 or to the type of the circuit pack that is physically present. (R,
//			setbycreate if applicable) (mandatory) (1-byte)
//
//		Number Of Ports
//			Number of ports: This attribute is the number of access ports on the circuit pack. If the port-
//			mapping package is supported for this circuit pack, this attribute should be set to the total
//			number of ports of all types. (R) (optional) (1-byte)
//
//		Serial Number
//			Serial number: The serial number is expected to be unique for each circuit pack, at least within
//			the scope of the given vendor. Note that the serial number may contain the vendor ID or version
//			number. For integrated ONUs, this value is identical to the value of the serial number attribute
//			of the ONU-G ME. Upon creation in the absence of a physical circuit pack, this attribute
//			comprises all spaces. (R) (mandatory) (8-bytes)
//
//		Version
//			Version:	This attribute is a string that identifies the version of the circuit pack as defined
//			by the vendor. The value 0 indicates that version information is not available or applicable.
//			For integrated ONUs, this value is identical to the value of the version attribute of the ONU-G
//			ME. Upon creation in the absence of a physical circuit pack, this attribute comprises all
//			spaces. (R) (mandatory) (14-bytes)
//
//		Vendor Id
//			Vendor ID:	This attribute identifies the vendor of the circuit pack. For ONUs with integrated
//			interfaces, this value is identical to the value of the vendor ID attribute of the ONU-G ME.
//			Upon creation in the absence of a physical circuit pack, this attribute comprises all spaces.
//			(R) (optional) (4-bytes)
//
//		Administrative State
//			Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
//			ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
//
//		Operational State
//			Operational state: This attribute indicates whether the circuit pack is capable of performing
//			its function. Valid values are enabled (0), disabled (1) and unknown (2). Pending completion of
//			initialization and self-test on an installed circuit pack, the ONU sets this attribute to 2. (R)
//			(optional) (1-byte)
//
//		Bridged Or Ip Ind
//			(R,-W) (optional, only applicable for circuit packs with Ethernet interfaces) (1-byte)
//
//		Equipment Id
//			Equipment ID: This attribute may be used to identify the vendor's specific type of circuit pack.
//			In some environments, this attribute may include the CLEI code. Upon ME instantiation, the ONU
//			sets this attribute to all spaces or to the equipment ID of the circuit pack that is physically
//			present. (R) (optional) (20-bytes)
//
//		Card Configuration
//			Upon autonomous instantiation, this attribute is set to 0. (R,-W, setbycreate if applicable)
//			(mandatory for configurable circuit packs) (1-byte)
//
//		Total T_Cont Buffer Number
//			Total T-CONT buffer number: This attribute reports the total number of T-CONT buffers associated
//			with the circuit pack. Upon ME instantiation, the ONU sets this attribute to 0 or to the value
//			supported by the physical circuit pack. (R) (mandatory for circuit packs that provide a traffic
//			scheduler function) (1-byte)
//
//		Total Priority Queue Number
//			Total priority queue number: This value reports the total number of priority queues associated
//			with the circuit pack. Upon ME instantiation, the ONU sets the attribute to 0 or to the value
//			supported by the physical circuit pack. (R) (mandatory for circuit packs that provide a traffic
//			scheduler function) (1-byte)
//
//		Total Traffic Scheduler Number
//			Total traffic scheduler number: This value reports the total number of traffic schedulers
//			associated with the circuit pack. The ONU supports null function, strict priority scheduling and
//			WRR from the priority control, and guarantee of minimum rate control points of view. If the
//			circuit pack has no traffic scheduler, this attribute should be absent or have the value 0. Upon
//			ME instantiation, the ONU sets the attribute to 0 or to the value supported by the physical
//			circuit pack. (R) (mandatory for circuit packs that provide a traffic scheduler function)
//			(1-byte)
//
//		Power Shed Override
//			Power shed override: This attribute allows ports to be excluded from the power shed control
//			defined in clause 9.1.7. It is a bit mask that takes port 1 as the MSB; a bit value of 1 marks
//			the corresponding port to override the power shed timer. For hardware that cannot shed power per
//			port, this attribute is a slot override rather than a port override, with any non-zero port
//			value causing the entire circuit pack to override power shedding. (R,-W) (optional) (4-bytes)
//
type CircuitPack struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

func init() {
	circuitpackBME = &ManagedEntityDefinition{
		Name:    "CircuitPack",
		ClassID: 6,
		MessageTypes: mapset.NewSetWith(
			Create,
			Get,
			Set,
		),
		AllowedAttributeMask: 0xfffc,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1:  ByteField("Type", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 1),
			2:  ByteField("NumberOfPorts", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, true, false, 2),
			3:  MultiByteField("SerialNumber", OctetsAttributeType, 0x2000, 8, toOctets("ICAgICAgICA="), mapset.NewSetWith(Read), false, false, false, 3),
			4:  MultiByteField("Version", OctetsAttributeType, 0x1000, 14, toOctets("ICAgICAgICAgICAgICA="), mapset.NewSetWith(Read), false, false, false, 4),
			5:  MultiByteField("VendorId", StringAttributeType, 0x0800, 4, toOctets("ICAgIA=="), mapset.NewSetWith(Read), false, true, false, 5),
			6:  ByteField("AdministrativeState", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
			7:  ByteField("OperationalState", EnumerationAttributeType, 0x0200, 2, mapset.NewSetWith(Read), true, true, false, 7),
			8:  ByteField("BridgedOrIpInd", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
			9:  MultiByteField("EquipmentId", StringAttributeType, 0x0080, 20, toOctets("ICAgICAgICAgICAgICAgICAgICA="), mapset.NewSetWith(Read), false, true, false, 9),
			10: ByteField("CardConfiguration", EnumerationAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
			11: ByteField("TotalTContBufferNumber", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
			12: ByteField("TotalPriorityQueueNumber", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
			13: ByteField("TotalTrafficSchedulerNumber", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
			14: Uint32Field("PowerShedOverride", BitFieldAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
		Alarms: AlarmMap{
			0: "Equipment alarm",
			1: "Powering alarm",
			2: "Self-test failure",
			3: "Laser end of life",
			4: "Temperature yellow",
			5: "Temperature red",
		},
	}
}

// NewCircuitPack (class ID 6) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewCircuitPack(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*circuitpackBME, params...)
}