/*
 * Copyright 2018-present Open Networking Foundation

 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at

 * http://www.apache.org/licenses/LICENSE-2.0

 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

//Package core provides the utility for onu devices, flows and statistics
package core

import "context"

//Attention: this file is more or less a coopy of file olt_platform.go from the voltha-openolt-adapter
// which includes system wide definitions and thus normally should be stored more centrally (within some voltha libs)!!

/*=====================================================================

@TODO: Looks like this Flow id concept below is not used anywhere
       Propose to remove the below documentation of Flow Id on confirmation
       of the same

Flow id

    Identifies a flow within a single OLT
    Flow Id is unique per OLT
    Multiple GEM ports can map to same flow id

     13    11              4      0
    +--------+--------------+------+
    | pon id |    onu id    | Flow |
    |        |              | idx  |
    +--------+--------------+------+

    14 bits = 16384 flows (per OLT).

    pon id = 4 bits = 16 PON ports
    onu id = 7 bits = 128 ONUss per PON port
    Flow index = 3 bits = 4 bi-directional flows per ONU
                        = 8 uni-directional flows per ONU


Logical (OF) UNI port number

    OpenFlow port number corresponding to PON UNI

     20        12              4      0
    +--+--------+--------------+------+
    |0 | pon id |    onu id    |uni id|
    +--+--------+--------------+------+

    pon id = 8 bits = 256 PON ports
    onu id = 8 bits = 256 ONUs per PON port

Logical (OF) NNI port number

    OpenFlow port number corresponding to PON NNI

     20                             0
    +--+----------------------------+
    |1 |                    intf_id |
    +--+----------------------------+

    No overlap with UNI port number space


PON OLT (OF) port number

    OpenFlow port number corresponding to PON OLT ports

     31     28                                 0
    +--------+------------------------~~~------+
    |  0x2   |          pon intf id            |
    +--------+------------------------~~~------+
*/

const (
	// Number of bits for the physical UNI of the ONUs
	bitsForUniID = 4
	// Number of bits for the ONU ID
	bitsForONUID = 8
	// Number of bits for PON ID
	bitsForPONID = 8
	/*
		// Number of bits to differentiate between UNI and NNI Logical Port
		bitsForUNINNIDiff = 1
	*/
	//maxOnusPerPon is Max number of ONUs on any PON port
	maxOnusPerPon = (1 << bitsForONUID)
	//maxPonsPerOlt is Max number of PON ports on any OLT
	maxPonsPerOlt = (1 << bitsForPONID)
	//maxUnisPerOnu is the Max number of UNI ports on any ONU
	maxUnisPerOnu = (1 << bitsForUniID)
	/*
		//Bit position where the differentiation bit is located
		nniUniDiffPos = (bitsForUniID + bitsForONUID + bitsForPONID)
		//Bit position where the marker for PON port type of OF port is present
		ponIntfMarkerPos = 28
		//Value of marker used to distinguish PON port type of OF port
		ponIntfMarkerValue = 0x2
		// Number of bits for NNI ID
		bitsforNNIID = 20
		// minNniIntPortNum is used to store start range of nni port number (1 << 20) 1048576
		minNniIntPortNum = (1 << bitsforNNIID)
		// maxNniPortNum is used to store the maximum range of nni port number ((1 << 21)-1) 2097151
		maxNniPortNum = ((1 << (bitsforNNIID + 1)) - 1)
	*/
)

/*
//MinUpstreamPortID value
var minUpstreamPortID = 0xfffd

//MaxUpstreamPortID value
var maxUpstreamPortID = 0xfffffffd

var controllerPorts = []uint32{0xfffd, 0x7ffffffd, 0xfffffffd}
*/

//mkUniPortNum returns new UNIportNum based on intfID, onuID and uniID
func mkUniPortNum(ctx context.Context, intfID, onuID, uniID uint32) uint32 {
	//extended for checks available in the python onu adapter:!!
	var limit = int(intfID)
	if limit > maxPonsPerOlt {
		logger.Warn(ctx, "Warning: exceeded the MAX pons per OLT")
	}
	limit = int(onuID)
	if limit > maxOnusPerPon {
		logger.Warn(ctx, "Warning: exceeded the MAX ONUS per PON")
	}
	limit = int(uniID)
	if limit > maxUnisPerOnu {
		logger.Warn(ctx, "Warning: exceeded the MAX UNIS per ONU")
	}
	return (intfID << (bitsForUniID + bitsForONUID)) | (onuID << bitsForUniID) | uniID
}

/*
//onuIDFromPortNum returns ONUID derived from portNumber
func onuIDFromPortNum(portNum uint32) uint32 {
	return (portNum >> bitsForUniID) & (maxOnusPerPon - 1)
}

//intfIDFromUniPortNum returns IntfID derived from portNum
func intfIDFromUniPortNum(portNum uint32) uint32 {
	return (portNum >> (bitsForUniID + bitsForONUID)) & (maxPonsPerOlt - 1)
}

//uniIDFromPortNum return UniID derived from portNum
func uniIDFromPortNum(portNum uint32) uint32 {
	return (portNum) & (maxUnisPerOnu - 1)
}

//intfIDToPortNo returns portId derived from intftype, intfId and portType
func intfIDToPortNo(intfID uint32, intfType voltha.Port_PortType) uint32 {
	if (intfType) == voltha.Port_ETHERNET_NNI {
		return (1 << nniUniDiffPos) | intfID
	}
	if (intfType) == voltha.Port_PON_OLT {
		return (ponIntfMarkerValue << ponIntfMarkerPos) | intfID
	}
	return 0
}

//portNoToIntfID returns portnumber derived from interfaceID
func portNoToIntfID(portno uint32, intfType voltha.Port_PortType) uint32 {
	if (intfType) == voltha.Port_ETHERNET_NNI {
		return (1 << nniUniDiffPos) ^ portno
	}
	if (intfType) == voltha.Port_PON_OLT {
		return (ponIntfMarkerValue << ponIntfMarkerPos) ^ portno
	}
	return 0
}

//intfIDFromNniPortNum returns Intf ID derived from portNum
func intfIDFromNniPortNum(portNum uint32) (uint32, error) {
	if portNum < minNniIntPortNum || portNum > maxNniPortNum {
		logger.Errorw(ctx,"NNIPortNumber is not in valid range", log.Fields{"portNum": portNum})
		return uint32(0), errors.New("invalid-port-range") //olterrors.ErrInvalidPortRange
	}
	return (portNum & 0xFFFF), nil
}

//intfIDToPortTypeName returns port type derived from the intfId
func intfIDToPortTypeName(intfID uint32) voltha.Port_PortType {
	if ((ponIntfMarkerValue << ponIntfMarkerPos) ^ intfID) < maxPonsPerOlt {
		return voltha.Port_PON_OLT
	}
	if (intfID & (1 << nniUniDiffPos)) == (1 << nniUniDiffPos) {
		return voltha.Port_ETHERNET_NNI
	}
	return voltha.Port_ETHERNET_UNI
}

//extractAccessFromFlow returns AccessDevice information
func extractAccessFromFlow(inPort, outPort uint32) (uint32, uint32, uint32, uint32) {
	if isUpstream(outPort) {
		return inPort, intfIDFromUniPortNum(inPort), onuIDFromPortNum(inPort), uniIDFromPortNum(inPort)
	}
	return outPort, intfIDFromUniPortNum(outPort), onuIDFromPortNum(outPort), uniIDFromPortNum(outPort)
}

//isUpstream returns true for Upstream and false for downstream
func isUpstream(outPort uint32) bool {
	for _, port := range controllerPorts {
		if port == outPort {
			return true
		}
	}
	return (outPort & (1 << nniUniDiffPos)) == (1 << nniUniDiffPos)
}

//isControllerBoundFlow returns true/false
func isControllerBoundFlow(outPort uint32) bool {
	for _, port := range controllerPorts {
		if port == outPort {
			return true
		}
	}
	return false
}

//onuIDFromUniPortNum returns onuId from give portNum information.
func onuIDFromUniPortNum(portNum uint32) uint32 {
	return (portNum >> bitsForUniID) & (maxOnusPerPon - 1)
}

//flowExtractInfo fetches uniport from the flow, based on which it gets and returns ponInf, onuID, uniID, inPort and ethType
func flowExtractInfo(flow *ofp.OfpFlowStats, flowDirection string) (uint32, uint32, uint32, uint32, uint32, uint32, error) {
	var uniPortNo uint32
	var ponIntf uint32
	var onuID uint32
	var uniID uint32
	var inPort uint32
	var ethType uint32

	if flowDirection == "upstream" {
		if uniPortNo = flows.GetChildPortFromTunnelId(flow); uniPortNo == 0 {
			for _, field := range flows.GetOfbFields(flow) {
				if field.GetType() == flows.IN_PORT {
					uniPortNo = field.GetPort()
					break
				}
			}
		}
	} else if flowDirection == "downstream" {
		if uniPortNo = flows.GetChildPortFromTunnelId(flow); uniPortNo == 0 {
			for _, field := range flows.GetOfbFields(flow) {
				if field.GetType() == flows.METADATA {
					for _, action := range flows.GetActions(flow) {
						if action.Type == flows.OUTPUT {
							if out := action.GetOutput(); out != nil {
								uniPortNo = out.GetPort()
							}
							break
						}
					}
				} else if field.GetType() == flows.IN_PORT {
					inPort = field.GetPort()
				} else if field.GetType() == flows.ETH_TYPE {
					ethType = field.GetEthType()
				}
			}
		}
	}

	if uniPortNo == 0 {
		return 0, 0, 0, 0, 0, 0, errors.New("notFound: pon-interface (flowDirection)")
		// olterrors.NewErrNotFound("pon-interface", log.Fields{"flow-direction": flowDirection}, nil)
	}

	ponIntf = intfIDFromUniPortNum(uniPortNo)
	onuID = onuIDFromUniPortNum(uniPortNo)
	uniID = uniIDFromPortNum(uniPortNo)

	logger.Debugw(ctx,"flow extract info result",
		log.Fields{"uniPortNo": uniPortNo, "ponIntf": ponIntf,
			"onuID": onuID, "uniID": uniID, "inPort": inPort, "ethType": ethType})

	return uniPortNo, ponIntf, onuID, uniID, inPort, ethType, nil
}
*/