[VOL-4485] omci-lib-go: ME Attribute names should be exported
Change-Id: I15ef78c3b470a9c49a23b32aad513c1cddfb3066
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/redownstreamamplifier.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/redownstreamamplifier.go
index d85e3a7..4173e73 100644
--- a/vendor/github.com/opencord/omci-lib-go/v2/generated/redownstreamamplifier.go
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/redownstreamamplifier.go
@@ -1,13 +1,13 @@
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
-
+ *
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
-
+ *
* http://www.apache.org/licenses/LICENSE-2.0
-
+ *
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
@@ -130,23 +130,38 @@
// dBm), with 0.5-dB granularity. The default value 0x7F selects the RE's internal policy. (R,-W)
// (optional) (1-byte)
//
-// R'S' Splitter Coupling Ratio
-// This attribute reports the coupling ratio of the splitter at the R'/S' interface that connects
-// the embedded management ONU and the amplifiers to the OTL. Valid values are 99:1 (coded as
-// 99-decimal) to 1:99 (coded as 1 decimal), where the first value is the value encoded and is the
-// percentage of the optical signal connected to the amplifier. The default value 0xFF indicates
-// that there is no splitter connected to this upstream/downstream amplifier pair. (R) (optional)
-// (1-byte)
+// R S Splitter Coupling Ratio
+// R'S' splitter coupling ratio: This attribute reports the coupling ratio of the splitter at the
+// R'/S' interface that connects the embedded management ONU and the amplifiers to the OTL. Valid
+// values are 99:1 (coded as 99-decimal) to 1:99 (coded as 1 decimal), where the first value is the
+// value encoded and is the percentage of the optical signal connected to the amplifier. The
+// default value 0xFF indicates that there is no splitter connected to this upstream/downstream
+// amplifier pair. (R) (optional) (1-byte)
//
type ReDownstreamAmplifier struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
+// Attribute name constants
+
+const ReDownstreamAmplifier_AdministrativeState = "AdministrativeState"
+const ReDownstreamAmplifier_OperationalState = "OperationalState"
+const ReDownstreamAmplifier_Arc = "Arc"
+const ReDownstreamAmplifier_ArcInterval = "ArcInterval"
+const ReDownstreamAmplifier_OperationalMode = "OperationalMode"
+const ReDownstreamAmplifier_InputOpticalSignalLevel = "InputOpticalSignalLevel"
+const ReDownstreamAmplifier_LowerInputOpticalThreshold = "LowerInputOpticalThreshold"
+const ReDownstreamAmplifier_UpperInputOpticalThreshold = "UpperInputOpticalThreshold"
+const ReDownstreamAmplifier_OutputOpticalSignalLevel = "OutputOpticalSignalLevel"
+const ReDownstreamAmplifier_LowerOutputOpticalThreshold = "LowerOutputOpticalThreshold"
+const ReDownstreamAmplifier_UpperOutputOpticalThreshold = "UpperOutputOpticalThreshold"
+const ReDownstreamAmplifier_RSSplitterCouplingRatio = "RSSplitterCouplingRatio"
+
func init() {
redownstreamamplifierBME = &ManagedEntityDefinition{
Name: "ReDownstreamAmplifier",
- ClassID: 316,
+ ClassID: ReDownstreamAmplifierClassID,
MessageTypes: mapset.NewSetWith(
Get,
Set,
@@ -154,19 +169,19 @@
),
AllowedAttributeMask: 0xfff0,
AttributeDefinitions: AttributeDefinitionMap{
- 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
- 1: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
- 2: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
- 3: ByteField("Arc", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
- 4: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
- 5: ByteField("OperationalMode", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
- 6: Uint16Field("InputOpticalSignalLevel", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, true, false, 6),
- 7: ByteField("LowerInputOpticalThreshold", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
- 8: ByteField("UpperInputOpticalThreshold", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
- 9: Uint16Field("OutputOpticalSignalLevel", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9),
- 10: ByteField("LowerOutputOpticalThreshold", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
- 11: ByteField("UpperOutputOpticalThreshold", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
- 12: ByteField("R'S'SplitterCouplingRatio", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
+ 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField(ReDownstreamAmplifier_AdministrativeState, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField(ReDownstreamAmplifier_OperationalState, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
+ 3: ByteField(ReDownstreamAmplifier_Arc, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
+ 4: ByteField(ReDownstreamAmplifier_ArcInterval, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+ 5: ByteField(ReDownstreamAmplifier_OperationalMode, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+ 6: Uint16Field(ReDownstreamAmplifier_InputOpticalSignalLevel, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, true, false, 6),
+ 7: ByteField(ReDownstreamAmplifier_LowerInputOpticalThreshold, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
+ 8: ByteField(ReDownstreamAmplifier_UpperInputOpticalThreshold, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+ 9: Uint16Field(ReDownstreamAmplifier_OutputOpticalSignalLevel, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9),
+ 10: ByteField(ReDownstreamAmplifier_LowerOutputOpticalThreshold, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+ 11: ByteField(ReDownstreamAmplifier_UpperOutputOpticalThreshold, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+ 12: ByteField(ReDownstreamAmplifier_RSSplitterCouplingRatio, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
},
Access: CreatedByOnu,
Support: UnknownSupport,