/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// Dot1AgChassisManagementInfoClassID is the 16-bit ID for the OMCI
// Managed entity Dot1ag chassis-management info
const Dot1AgChassisManagementInfoClassID = ClassID(306) // 0x0132

var dot1agchassismanagementinfoBME *ManagedEntityDefinition

// Dot1AgChassisManagementInfo (Class ID: #306 / 0x0132)
//	This ME represents the system-level chassis ID or management address for [IEEE-802.1ag] CFM
//	messages, and potentially for other IEEE 802-based functions. Although [IEEE-802.1AB] allows for
//	several management addresses (synonyms in different formats or with granularity to the component
//	level), [IEEE-802.1ag] does not provide for more than one. Nor is it expected that an ONU would
//	require more than one format. Accordingly, this ME provides for only one.
//
//	According to sender ID permission attributes in several dot1ag MEs, transmitted IEEE-802.1ag CFM
//	messages may include either or both of the chassis ID or management address
//	fields.[IEEE-802.1ag] requires that CCMs do not exceed 128-bytes, of which 74 are separately
//	allocated to other purposes; the sender ID TLV, if present, must accommodate this requirement.
//	The chassis info and management info must fit, with a minimum of 4 additional overhead bytes,
//	into the remaining 54-bytes. This limit is exploited in defining the maximum size of the ME's
//	attributes.
//
//	Relationships
//		If an ONU supports [IEEE 802.1ag] functionality, it automatically creates an instance of this
//		ME.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies this ME. There is at most one instance, whose value is 0. (R)
//			(mandatory) (2-bytes)
//
//		Chassis Id Length
//			The length of the chassis ID attribute (not including the chassis ID subtype attribute), default
//			value 0. (R,-W) (mandatory) (1-byte)
//
//		Chassis Id Subtype
//			The format of the chassis ID attribute, default value 7, as defined in [IEEE 802.1AB]:
//
//			(R,-W) (mandatory) (1-byte)
//
//		Chassis ID Part 1
//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
//			by the chassis ID length attribute and whose value is the left-justified chassis ID. (R,-W)
//			(mandatory) (25-bytes-*-2 attributes)
//
//		Chassis ID Part 2
//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
//			by the chassis ID length attribute and whose value is the left-justified chassis ID. (R,-W)
//			(mandatory) (25-bytes-*-2 attributes)
//
//		Management Address Domain Length
//			The length of the management address domain attribute, default value 0. If this attribute has
//			the value 0, all of the other management address attributes are undefined. (R,-W) (mandatory)
//			(1-byte)
//
//		Management Address Domain 1
//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
//			by the management address domain length attribute and whose value is the left-justified
//			management address domain. The attribute is coded as an object identifier (OID) as per [ITUT
//			X.690], referring to a TDomain as defined in [IETF RFC 2579]. Typical domain values include
//			snmpUDPDomain (from SNMPv2-TM [IETF RFC 3417]) and snmpIeee802Domain (from SNMP-IEEE 802-TM-MIB
//			[IETF RFC 4789]). (R,-W) (mandatory) (25-bytes * 2 attributes)
//
//		Management Address Domain 2
//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
//			by the management address domain length attribute and whose value is the left-justified
//			management address domain. The attribute is coded as an object identifier (OID) as per [ITUT
//			X.690], referring to a TDomain as defined in [IETF RFC 2579]. Typical domain values include
//			snmpUDPDomain (from SNMPv2-TM [IETF RFC 3417]) and snmpIeee802Domain (from SNMP-IEEE 802-TM-MIB
//			[IETF RFC 4789]). (R,-W) (mandatory) (25-bytes * 2 attributes)
//
//		Management Address Length
//			The length of the management address attribute, default value 0. (R,-W) (mandatory) (1-byte)
//
//		Management Address 1
//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
//			by the management address length attribute and whose value is the left-justified management
//			address. (R,-W) (mandatory) (25-bytes * 2 attributes)
//
//		Management Address 2
//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
//			by the management address length attribute and whose value is the left-justified management
//			address. (R,-W) (mandatory) (25-bytes * 2 attributes)
//
type Dot1AgChassisManagementInfo struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const Dot1AgChassisManagementInfo_ChassisIdLength = "ChassisIdLength"
const Dot1AgChassisManagementInfo_ChassisIdSubtype = "ChassisIdSubtype"
const Dot1AgChassisManagementInfo_ChassisIdPart1 = "ChassisIdPart1"
const Dot1AgChassisManagementInfo_ChassisIdPart2 = "ChassisIdPart2"
const Dot1AgChassisManagementInfo_ManagementAddressDomainLength = "ManagementAddressDomainLength"
const Dot1AgChassisManagementInfo_ManagementAddressDomain1 = "ManagementAddressDomain1"
const Dot1AgChassisManagementInfo_ManagementAddressDomain2 = "ManagementAddressDomain2"
const Dot1AgChassisManagementInfo_ManagementAddressLength = "ManagementAddressLength"
const Dot1AgChassisManagementInfo_ManagementAddress1 = "ManagementAddress1"
const Dot1AgChassisManagementInfo_ManagementAddress2 = "ManagementAddress2"

func init() {
	dot1agchassismanagementinfoBME = &ManagedEntityDefinition{
		Name:    "Dot1AgChassisManagementInfo",
		ClassID: Dot1AgChassisManagementInfoClassID,
		MessageTypes: mapset.NewSetWith(
			Get,
			Set,
		),
		AllowedAttributeMask: 0xffc0,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
			1:  ByteField(Dot1AgChassisManagementInfo_ChassisIdLength, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
			2:  ByteField(Dot1AgChassisManagementInfo_ChassisIdSubtype, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
			3:  MultiByteField(Dot1AgChassisManagementInfo_ChassisIdPart1, OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3),
			4:  MultiByteField(Dot1AgChassisManagementInfo_ChassisIdPart2, OctetsAttributeType, 0x1000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 4),
			5:  ByteField(Dot1AgChassisManagementInfo_ManagementAddressDomainLength, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
			6:  MultiByteField(Dot1AgChassisManagementInfo_ManagementAddressDomain1, OctetsAttributeType, 0x0400, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 6),
			7:  MultiByteField(Dot1AgChassisManagementInfo_ManagementAddressDomain2, OctetsAttributeType, 0x0200, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 7),
			8:  ByteField(Dot1AgChassisManagementInfo_ManagementAddressLength, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
			9:  MultiByteField(Dot1AgChassisManagementInfo_ManagementAddress1, OctetsAttributeType, 0x0080, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 9),
			10: MultiByteField(Dot1AgChassisManagementInfo_ManagementAddress2, OctetsAttributeType, 0x0040, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 10),
		},
		Access:  CreatedByOnu,
		Support: UnknownSupport,
	}
}

// NewDot1AgChassisManagementInfo (class ID 306) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewDot1AgChassisManagementInfo(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*dot1agchassismanagementinfoBME, params...)
}