/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// GemPortNetworkCtpPerformanceMonitoringHistoryDataClassID is the 16-bit ID for the OMCI
// Managed entity GEM port network CTP performance monitoring history data
const GemPortNetworkCtpPerformanceMonitoringHistoryDataClassID = ClassID(341) // 0x0155

var gemportnetworkctpperformancemonitoringhistorydataBME *ManagedEntityDefinition

// GemPortNetworkCtpPerformanceMonitoringHistoryData (Class ID: #341 / 0x0155)
//	This ME collects GEM frame PM data associated with a GEM port network CTP. Instances of this ME
//	are created and deleted by the OLT.
//
//	NOTE 1 - One might expect to find some form of impaired or discarded frame count associated with
//	a GEM port. However, the only impairment that might be detected at the GEM frame level would be
//	a corrupted GEM frame header. In this case, no part of the header could be considered reliable
//	including the port ID. For this reason, there is no impaired or discarded frame count in this
//	ME.
//
//	NOTE 2 - This ME replaces the GEM port performance history data ME and is preferred for new
//	implementations.
//
//	For a complete discussion of generic PM architecture, refer to clause I.4.
//
//	Relationships
//		An instance of this ME is associated with an instance of the GEM port network CTP ME.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
//			implicitly linked to an instance of the GEM port network CTP. (R, setbycreate) (mandatory)
//			(2-bytes)
//
//		Interval End Time
//			This attribute identifies the most recently finished 15-min interval. (R) (mandatory) (1-byte)
//
//		Threshold Data 1_2 Id
//			Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 ME that
//			contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold
//			data 2 ME is optional. (R,-W, setbycreate) (mandatory) (2-bytes)
//
//		Transmitted Gem Frames
//			This attribute counts GEM frames transmitted on the monitored GEM port. (R) (mandatory)
//			(4-bytes)
//
//		Received Gem Frames
//			This attribute counts GEM frames received correctly on the monitored GEM port. A correctly
//			received GEM frame is one that does not contain uncorrectable errors and has a valid header
//			error check (HEC). (R) (mandatory) (4-bytes)
//
//		Received Payload Bytes
//			This attribute counts user payload bytes received on the monitored GEM port. (R) (mandatory)
//			(8-bytes)
//
//		Transmitted Payload Bytes
//			This attribute counts user payload bytes transmitted on the monitored GEM port. (R) (mandatory)
//			(8-bytes)
//
//		Encryption Key Errors
//			NOTE 3 - GEM PM ignores idle GEM frames.
//
//			NOTE 4 - GEM PM counts each non-idle GEM frame, whether it contains an entire user frame or only
//			a fragment of a user frame.
//
//			This attribute is defined in ITU-T G.987 systems only. It counts GEM frames with erroneous
//			encryption key indexes. If the GEM port is not encrypted, this attribute counts any frame with a
//			key index not equal to 0. If the GEM port is encrypted, this attribute counts any frame whose
//			key index specifies a key that is not known to the ONU. (R) (optional) (4-bytes)
//
type GemPortNetworkCtpPerformanceMonitoringHistoryData struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const GemPortNetworkCtpPerformanceMonitoringHistoryData_IntervalEndTime = "IntervalEndTime"
const GemPortNetworkCtpPerformanceMonitoringHistoryData_ThresholdData12Id = "ThresholdData12Id"
const GemPortNetworkCtpPerformanceMonitoringHistoryData_TransmittedGemFrames = "TransmittedGemFrames"
const GemPortNetworkCtpPerformanceMonitoringHistoryData_ReceivedGemFrames = "ReceivedGemFrames"
const GemPortNetworkCtpPerformanceMonitoringHistoryData_ReceivedPayloadBytes = "ReceivedPayloadBytes"
const GemPortNetworkCtpPerformanceMonitoringHistoryData_TransmittedPayloadBytes = "TransmittedPayloadBytes"
const GemPortNetworkCtpPerformanceMonitoringHistoryData_EncryptionKeyErrors = "EncryptionKeyErrors"

func init() {
	gemportnetworkctpperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
		Name:    "GemPortNetworkCtpPerformanceMonitoringHistoryData",
		ClassID: GemPortNetworkCtpPerformanceMonitoringHistoryDataClassID,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
			GetCurrentData,
		),
		AllowedAttributeMask: 0xfe00,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1: ByteField(GemPortNetworkCtpPerformanceMonitoringHistoryData_IntervalEndTime, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
			2: Uint16Field(GemPortNetworkCtpPerformanceMonitoringHistoryData_ThresholdData12Id, PointerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3: Uint32Field(GemPortNetworkCtpPerformanceMonitoringHistoryData_TransmittedGemFrames, CounterAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
			4: Uint32Field(GemPortNetworkCtpPerformanceMonitoringHistoryData_ReceivedGemFrames, CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
			5: Uint64Field(GemPortNetworkCtpPerformanceMonitoringHistoryData_ReceivedPayloadBytes, CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
			6: Uint64Field(GemPortNetworkCtpPerformanceMonitoringHistoryData_TransmittedPayloadBytes, CounterAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
			7: Uint32Field(GemPortNetworkCtpPerformanceMonitoringHistoryData_EncryptionKeyErrors, CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, true, false, 7),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
		Alarms: AlarmMap{
			1: "Encryption key errors",
		},
	}
}

// NewGemPortNetworkCtpPerformanceMonitoringHistoryData (class ID 341) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewGemPortNetworkCtpPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*gemportnetworkctpperformancemonitoringhistorydataBME, params...)
}