/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// MulticastSubscriberConfigInfoClassID is the 16-bit ID for the OMCI
// Managed entity Multicast subscriber config info
const MulticastSubscriberConfigInfoClassID = ClassID(310) // 0x0136

var multicastsubscriberconfiginfoBME *ManagedEntityDefinition

// MulticastSubscriberConfigInfo (Class ID: #310 / 0x0136)
//	This ME organizes data associated with multicast management at subscriber ports of IEEE-802.1
//	bridges, including IEEE-802.1p mappers when the provisioning model is mapper-based rather than
//	bridge-based. Instances of this ME are created and deleted by the OLT. Because of backward
//	compatibility considerations, a subscriber port without an associated multicast subscriber
//	config info ME would be expected to support unrestricted multicast access; this ME may therefore
//	be viewed as restrictive, rather than permissive.
//
//	Through separate attributes, this ME supports either a single multicast operations profile in
//	its backward compatible form, or a list of multicast operations profiles instead (the list may
//	of course contain a single entry). The OLT can determine whether the ONU supports the multiple
//	profile capability by performing a get operation on the optional multicast service package table
//	attribute, which exists only on ONUs that are prepared to support the feature.
//
//	Relationships
//		An instance of this ME is associated with one instance of the MAC bridge port configuration data
//		or the IEEE-802.1p mapper service profile.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
//			implicitly linked to an instance of the MAC bridge port configuration data or IEEE-802.1p mapper
//			ME. (R, setbycreate) (mandatory) (2-bytes)
//
//		Me Type
//			(R,-W, setbycreate) (mandatory) (1-byte)
//
//			This attribute indicates the type of the ME implicitly linked by the ME ID attribute.
//
//			0	MAC bridge port config data
//
//			1	IEEE-802.1p mapper service profile
//
//		Multicast Operations Profile Pointer
//			This attribute points to an instance of the multicast operations profile. This attribute is
//			ignored by the ONU if a non-empty multicast service package table attribute is present. (R,W,
//			set-by-create) (mandatory) (2 bytes)
//
//		Max Simultaneous Groups
//			This attribute specifies the maximum number of dynamic multicast groups that may be replicated
//			to the client port at any one time. The recommended default value 0 specifies that no
//			administrative limit is to be imposed. (R,-W, setbycreate) (optional) (2-bytes)
//
//		Max Multicast Bandwidth
//			This attribute specifies the maximum imputed dynamic bandwidth, in bytes per second, that may be
//			delivered to the client port at any one time. The recommended default value 0 specifies that no
//			administrative limit is to be imposed. (R,-W, setbycreate) (optional) (4-bytes)
//
//		Bandwidth Enforcement
//			The recommended default value of this Boolean attribute is false, and specifies that attempts to
//			exceed the max multicast bandwidth be counted but honoured. The value true specifies that such
//			attempts be counted and denied. The imputed bandwidth value is taken from the dynamic access
//			control list table, both for a new join request and for pre-existing groups. (R,-W, setbycreate)
//			(optional) (1-byte)
//
//		Multicast Service Package Table
//			This attribute is a list that specifies one or more multicast service packages. When the ONU
//			receives an IGMP/MLD join request, it searches the multicast service package table in row key
//			order, matching the VID (UNI) field (several rows can share the same VID). For each VID (UNI)
//			match, the multicast operations profile pointer is used to access the ME that contains the
//			attributes associated with the service package. The search stops when all requested multicast
//			groups have been found and dealt with.
//
//			Each list entry is a vector of six components as follow.
//
//			-	Table control (2-bytes)
//
//			The first 2-bytes of each entry contain a key into the table. It is the responsibility of the
//			OLT to assign and track table keys and content. Since row keys are created by the OLT, they may
//			be densely or sparsely packed.
//
//			The two MSBs of this field determine the meaning of a set operation. These bits are returned as
//			00 during get next operations.
//
//			Bits 14..11 are reserved. Bits 10..1 are the row key itself.
//
//			-	VID (UNI). The value in this field is compared with the VID of upstream IGMP/MLD messages, and
//			is used to decide whether to honour a join request. (2 bytes)
//
//			Values:
//
//			0..4095 - Matched against the VID of the IGMP/MLD message. 0 indicates a priority-tagged
//			message, whose P bits are ignored.
//
//			4096 - Matches untagged IGMP/MLD messages only.
//
//			4097 - Matches tagged messages only, but ignores the value of the VID.
//
//			0xFFFF - Unspecified.
//
//			The VID (UNI) comparison occurs prior to any action defined by the upstream IGMP tag control
//			attribute in an associated multicast operations profile (or alternatively, before any
//			modification by a possible (extended) VLAN tagging operation configuration data ME).
//
//			-	Max simultaneous groups. This field specifies the maximum number of dynamic multicast groups
//			that may be replicated to the client port at any one time, for the multicast service package
//			that is associated with this row. The value 0 specifies that no administrative limit is to be
//			imposed. (2-bytes)
//
//			-	Max multicast bandwidth. This field specifies the maximum imputed dynamic bandwidth, in bytes
//			per second, that may be delivered to the client port at any one time, for the multicast service
//			package that is associated with this row. The value 0 specifies that no administrative limit is
//			to be imposed. (4-bytes)
//
//			NOTE - The port is also constrained by the global max simultaneous groups and max multicast
//			bandwidth attributes of the multicast subscriber config info ME.
//
//			-	Multicast operations profile pointer. This field contains the ME ID of the multicast
//			operations profile ME associated with this service package. (2 bytes)
//
//			-	Reserved (8 bytes)
//
//			(R,-W) (optional) (20N bytes, where N is the number of entries in the table)
//
//		Allowed Preview Groups Table
//			Each list entry begins with a table control field:
//
//			This attribute is a list that specifies the preview groups that are currently allowed for the
//			UNI associated with this ME. It is intended to support paid viewing of a multicast group that
//			may or may not have been previewed.
//
//			When an IGMP/MLD join request is received, the order of search precedence is as follows.
//
//			1. Multicast operations profile(s), fully authorized groups
//
//			2. This attribute, the allowed preview groups table
//
//			3. Multicast operations profile(s), preview-only groups
//
//			If the first match is a group listed in this attribute, the ONU forwards the group to the UNI
//			until the group is removed from this list or until the subscriber leaves the group.
//
type MulticastSubscriberConfigInfo struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const MulticastSubscriberConfigInfo_MeType = "MeType"
const MulticastSubscriberConfigInfo_MulticastOperationsProfilePointer = "MulticastOperationsProfilePointer"
const MulticastSubscriberConfigInfo_MaxSimultaneousGroups = "MaxSimultaneousGroups"
const MulticastSubscriberConfigInfo_MaxMulticastBandwidth = "MaxMulticastBandwidth"
const MulticastSubscriberConfigInfo_BandwidthEnforcement = "BandwidthEnforcement"
const MulticastSubscriberConfigInfo_MulticastServicePackageTable = "MulticastServicePackageTable"
const MulticastSubscriberConfigInfo_AllowedPreviewGroupsTable = "AllowedPreviewGroupsTable"

func init() {
	multicastsubscriberconfiginfoBME = &ManagedEntityDefinition{
		Name:    "MulticastSubscriberConfigInfo",
		ClassID: MulticastSubscriberConfigInfoClassID,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			GetNext,
			Set,
			SetTable,
		),
		AllowedAttributeMask: 0xfe00,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1: ByteField(MulticastSubscriberConfigInfo_MeType, EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
			2: Uint16Field(MulticastSubscriberConfigInfo_MulticastOperationsProfilePointer, PointerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3: Uint16Field(MulticastSubscriberConfigInfo_MaxSimultaneousGroups, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
			4: Uint32Field(MulticastSubscriberConfigInfo_MaxMulticastBandwidth, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
			5: ByteField(MulticastSubscriberConfigInfo_BandwidthEnforcement, EnumerationAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
			6: TableField(MulticastSubscriberConfigInfo_MulticastServicePackageTable, TableAttributeType, 0x0400, TableInfo{nil, 20}, mapset.NewSetWith(Read, Write), false, true, false, 6),
			7: TableField(MulticastSubscriberConfigInfo_AllowedPreviewGroupsTable, TableAttributeType, 0x0200, TableInfo{nil, 22}, mapset.NewSetWith(Read, Write), false, false, false, 7),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
	}
}

// NewMulticastSubscriberConfigInfo (class ID 310) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewMulticastSubscriberConfigInfo(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*multicastsubscriberconfiginfoBME, params...)
}