/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// PriorityQueueClassID is the 16-bit ID for the OMCI
// Managed entity Priority queue
const PriorityQueueClassID = ClassID(277) // 0x0115

var priorityqueueBME *ManagedEntityDefinition

// PriorityQueue (Class ID: #277 / 0x0115)
//	NOTE 1 - In [ITU-T G.984.4], this is called a priority queue-G.
//
//	This ME specifies the priority queue used by a GEM port network CTP in the upstream direction.
//	The upstream priority queue ME is also related to a T-CONT ME. By default, this relationship is
//	fixed by the ONU hardware architecture, but some ONUs may also permit the relationship to be
//	configured through the OMCI, as indicated by the QoS configuration flexibility attribute of the
//	ONU2G ME.
//
//	In the downstream direction, priority queues are associated with UNIs. Again, the association is
//	fixed by default, but some ONUs may permit the association to be configured through the OMCI.
//
//	If an ONU as a whole contains priority queues, it instantiates these queues autonomously.
//	Priority queues may also be localized to pluggable circuit packs, in which case the ONU creates
//	and deletes them in accordance with circuit pack pre-provisioning and the equipped
//	configuration.
//
//	The OLT can find all the queues by reading the priority queue ME instances. If the OLT tries to
//	retrieve a non-existent priority queue, the ONU denies the get action with an error indication.
//
//	See also Appendix II.
//
//	Priority queues can exist in the ONU core and circuit packs serving both UNI and ANI functions.
//	Therefore, they can be indirectly created and destroyed through cardholder provisioning actions.
//
//	In the upstream direction, the weight attribute permits the configuring of an optional traffic
//	scheduler. Several attributes support back pressure operation, whereby a back-pressure signal is
//	sent backwards and causes the attached terminal to temporarily suspend sending data.
//
//	In the downstream direction, strict priority discipline among the queues serving a given UNI is
//	the default, with priorities established through the related port attribute. If two or more non-
//	empty queues have the same priority, capacity is allocated among them in proportion to their
//	weights. Note that the details of the downstream model differ from those of the upstream model.
//
//	The yellow packet drop thresholds specify the drop probability for a packet that has been marked
//	yellow (drop eligible) by a traffic descriptor or by external equipment such as a residential
//	gateway (RG). If the current average queue occupancy is less than the minimum threshold, the
//	yellow packet drop probability is zero. If the current average queue occupancy is greater than
//	or equal to the maximum threshold, the yellow packet drop probability is one. The yellow drop
//	probability increases linearly between 0 and max_p as the current average queue occupancy
//	increases from the minimum to the maximum threshold.
//
//	The same model can be configured for green packets, those regarded as being within the traffic
//	contract.
//
//	Drop precedence colour marking indicates the method by which a packet is marked as drop eligible
//	(yellow). For discard eligibility indicator (DEI) and priority code point (PCP) marking, a drop
//	eligible indicator is equivalent to yellow colour; otherwise, the colour is green. For
//	differentiated services code point (DSCP) assured forwarding (AF) marking, the lowest drop
//	precedence is equivalent to green; otherwise, the colour is yellow.
//
//	Relationships
//		One or more instances of this ME are associated with the ONU-G ME to model upstream priority
//		queues if the traffic management option attribute in the ONU-G ME is 0 or 2.////		One or more instances of this ME are associated with a PPTP UNI ME as downstream priority
//		queues. Downstream priority queues may or may not be provided for a virtual Ethernet interface
//		point (VEIP).
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. The MSB represents the direction
//			(1: upstream, 0:-downstream). The 15 LSBs represent a queue ID. The queue ID is numbered in
//			ascending order by the ONU itself. It is strongly encouraged that the queue ID be formulated to
//			simplify finding related queues. One way to do this is to number the queues such that the
//			related port attributes are in ascending order (for the downstream and upstream queues
//			separately). The range of downstream queue ids is 0 to 0x7FFF and the range of upstream queue
//			ids is 0x8000 to 0xFFFF. (R) (mandatory) (2-bytes)
//
//		Queue Configuration Option
//			This attribute identifies the buffer partitioning policy. The value 1 means that several queues
//			share one buffer of maximum queue size, while the value 0 means that each queue has an
//			individual buffer of maximum queue size. (R) (mandatory) (1-byte)
//
//		Maximum Queue Size
//			This attribute specifies the maximum size of the queue, in bytes, scaled by the priority queue
//			scale factor attribute of the ONU2G. (R) (mandatory) (2 bytes)
//
//			NOTE 2 - In this and the other similar attributes of the priority queue ME, some legacy
//			implementations may take the queue scale factor from the GEM block length attribute of the ANI-G
//			ME. This option is discouraged in new implementations.
//
//		Allocated Queue Size
//			This attribute identifies the allocated size of this queue, in bytes, scaled by the priority
//			queue scale factor attribute of the ONU2G. (R, W) (mandatory) (2 bytes)
//
//		Discard_Block Counter Reset Interval
//			Discard-block counter reset interval: This attribute represents the interval in milliseconds at
//			which the counter resets itself. (R,-W) (optional) (2-bytes)
//
//		Threshold Value For Discarded Blocks Due To Buffer Overflow
//			This attribute specifies the threshold for the number of bytes (scaled by the priority queue
//			scale factor attribute of the ONU2G) discarded on this queue due to buffer overflow. Its value
//			controls the declaration of the block loss alarm. (R, W) (optional) (2-bytes)
//
//		Related Port
//			This attribute represents the slot, port/T-CONT and priority information associated with the
//			instance of priority queue ME. This attribute comprises 4-bytes.
//
//			In the upstream direction, the first 2-bytes are the ME ID of the associated T-CONT, the first
//			byte of which is a slot number, the second byte a T-CONT number. In the downstream direction,
//			the first byte is the slot number and the second byte is the port number of the queue's
//			destination port.
//
//			The last 2-bytes represent the priority of this queue. The range of priority is 0 to 0x0FFF. The
//			value 0 indicates the highest priority and 0x0FFF indicates the lowest priority. The priority
//			field is meaningful if multiple priority queues are associated with a T-CONT or traffic
//			scheduler whose scheduling discipline is strict priority.
//
//			(R, W) (mandatory) (4 bytes)
//
//			NOTE 3 - If flexible port configuration is supported, the related port attribute is meaningful
//			only if the traffic scheduler pointer attribute value is null. Otherwise, the related port
//			attribute is ignored.
//
//			NOTE 4 - The related port attribute is read-only, unless otherwise specified by the QoS
//			configuration flexibility attribute of the ONU2-G ME. If port flexibility is supported, the
//			second byte, the port or T-CONT number, may be changed. If priority flexibility is supported,
//			the third and fourth bytes may be changed. The OMCI set command must contain 4-bytes to match
//			the attribute size, but the ONU must ignore all bytes that are not specified to be flexible.
//
//			If flexible configuration is not supported, the ONU should reject an attempt to set the related
//			port with a parameter error result-reason code.
//
//		Traffic Scheduler Pointer
//			The ONU should reject an attempt to violate these conditions with a parameter error result-
//			reason code.
//
//			This attribute points to the traffic scheduler ME instance that is associated with this priority
//			queue. This pointer is used when this priority queue is connected with a traffic scheduler. The
//			default value is a null pointer (0). (R, W) (mandatory) (2 bytes)
//
//			NOTE 5 - When the QoS configuration flexibility attribute of the ONU2-G ME allows flexible
//			assignment of the traffic scheduler, the OLT may configure the traffic scheduler pointer to
//			refer to any traffic scheduler in the same slot.
//
//			If traffic scheduler flexibility is not permitted by the QoS configuration flexibility
//			attribute, the OLT may use the traffic scheduler pointer attribute only by pointing to another
//			traffic scheduler ME that is associated with the same T-CONT as the priority queue itself.
//
//		Weight
//			This attribute represents weight for WRR scheduling. At a given priority level, capacity is
//			distributed to non-empty queues in proportion to their weights. In the upstream direction, this
//			weight is meaningful if several priority queues are associated with a traffic scheduler or
//			T-CONT whose policy is WRR. In the downstream direction, this weight is used by a UNI in a WRR
//			fashion. Upon ME instantiation, the ONU sets this attribute to 1. (R,-W) (mandatory) (1-byte)
//
//		Back Pressure Operation
//			This attribute enables (0) or disables (1) back pressure operation. Its default value is 0.
//			(R,-W) (mandatory) (2-bytes)
//
//		Back Pressure Time
//			This attribute specifies the duration in microseconds of the backpressure signal. It can be used
//			as a pause time for an Ethernet UNI. Upon ME instantiation, the ONU sets this attribute to 0.
//			(R,-W) (mandatory) (4-bytes)
//
//		Back Pressure Occur Queue Threshold
//			This attribute identifies the threshold queue occupancy, in bytes, scaled by the priority queue
//			scale factor attribute of the ONU2G, to start sending a back-pressure signal. (R, W) (mandatory)
//			(2-bytes)
//
//		Back Pressure Clear Queue Threshold
//			This attribute identifies the threshold queue occupancy, in bytes, scaled by the priority queue
//			scale factor attribute of the ONU2G, to stop sending a back-pressure signal. (R, W) (mandatory)
//			(2-bytes)
//
//		Packet Drop Queue Thresholds
//			This attribute is a composite of four 2-byte values, a minimum and a maximum threshold, measured
//			in bytes, scaled by the priority queue scale factor attribute of the ONU2-G, for green and
//			yellow packets. The first value is the minimum green threshold, the queue occupancy below which
//			all green packets are admitted to the queue. The second value is the maximum green threshold,
//			the queue occupancy at or above which all green packets are discarded. The third value is the
//			minimum yellow threshold, the queue occupancy below which all yellow packets are admitted to the
//			queue. The fourth value is the maximum yellow threshold, the queue occupancy at or above which
//			all yellow packets are discarded. The default is that all thresholds take the value of the
//			maximum queue size. (R,-W) (optional) (8-bytes)
//
//		Packet Drop Max_P
//			This attribute is a composite of two 1-byte values, the probability of dropping a coloured
//			packet when the queue occupancy lies just below the maximum threshold for packets of that
//			colour. The first value is the green packet max_p, and the second value is the yellow packet
//			max_p. The probability, max_p, is determined by adding one to the unsigned value (0..255) of
//			this attribute and dividing the result by 256. The default for each value is 255. (R,-W)
//			(optional) (2-bytes)
//
//		Queue Drop W_Q
//			This attribute determines the averaging coefficient, w_q, as described in [b-Floyd]. The
//			averaging coefficient, w_q, is equal to 2Queue_drop_w_q. For example, when queue drop_w_q has
//			the value 9, the averaging coefficient, w_q, is 1/512-= 0.001-9. The default value is 9. (R,-W)
//			(optional) (1-byte)
//
//		Drop Precedence Colour Marking
//			6	PCP 5P3D [IEEE 802.1ad]
//
//			7	DSCP AF class [IETF RFC 2597]
//
//			(R,-W) (optional) (1-byte)
//
//			This attribute specifies how drop precedence is marked on ingress packets to the priority queue.
//			The default value is 0.
//
//			0	No marking (treat all packets as green)
//
//			1	Internal marking (from traffic descriptor ME)
//
//			2	DEI [IEEE 802.1ad]
//
//			3	PCP 8P0D [IEEE 802.1ad]
//
//			4	PCP 7P1D [IEEE 802.1ad]
//
//			5	PCP 6P2D [IEEE 802.1ad]
//
type PriorityQueue struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const PriorityQueue_QueueConfigurationOption = "QueueConfigurationOption"
const PriorityQueue_MaximumQueueSize = "MaximumQueueSize"
const PriorityQueue_AllocatedQueueSize = "AllocatedQueueSize"
const PriorityQueue_DiscardBlockCounterResetInterval = "DiscardBlockCounterResetInterval"
const PriorityQueue_ThresholdValueForDiscardedBlocksDueToBufferOverflow = "ThresholdValueForDiscardedBlocksDueToBufferOverflow"
const PriorityQueue_RelatedPort = "RelatedPort"
const PriorityQueue_TrafficSchedulerPointer = "TrafficSchedulerPointer"
const PriorityQueue_Weight = "Weight"
const PriorityQueue_BackPressureOperation = "BackPressureOperation"
const PriorityQueue_BackPressureTime = "BackPressureTime"
const PriorityQueue_BackPressureOccurQueueThreshold = "BackPressureOccurQueueThreshold"
const PriorityQueue_BackPressureClearQueueThreshold = "BackPressureClearQueueThreshold"
const PriorityQueue_PacketDropQueueThresholds = "PacketDropQueueThresholds"
const PriorityQueue_PacketDropMaxP = "PacketDropMaxP"
const PriorityQueue_QueueDropWQ = "QueueDropWQ"
const PriorityQueue_DropPrecedenceColourMarking = "DropPrecedenceColourMarking"

func init() {
	priorityqueueBME = &ManagedEntityDefinition{
		Name:    "PriorityQueue",
		ClassID: PriorityQueueClassID,
		MessageTypes: mapset.NewSetWith(
			Get,
			Set,
		),
		AllowedAttributeMask: 0xffff,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
			1:  ByteField(PriorityQueue_QueueConfigurationOption, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
			2:  Uint16Field(PriorityQueue_MaximumQueueSize, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
			3:  Uint16Field(PriorityQueue_AllocatedQueueSize, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
			4:  Uint16Field(PriorityQueue_DiscardBlockCounterResetInterval, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
			5:  Uint16Field(PriorityQueue_ThresholdValueForDiscardedBlocksDueToBufferOverflow, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5),
			6:  Uint32Field(PriorityQueue_RelatedPort, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
			7:  Uint16Field(PriorityQueue_TrafficSchedulerPointer, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
			8:  ByteField(PriorityQueue_Weight, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
			9:  Uint16Field(PriorityQueue_BackPressureOperation, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9),
			10: Uint32Field(PriorityQueue_BackPressureTime, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10),
			11: Uint16Field(PriorityQueue_BackPressureOccurQueueThreshold, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
			12: Uint16Field(PriorityQueue_BackPressureClearQueueThreshold, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
			13: Uint64Field(PriorityQueue_PacketDropQueueThresholds, UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
			14: Uint16Field(PriorityQueue_PacketDropMaxP, UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
			15: ByteField(PriorityQueue_QueueDropWQ, UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
			16: ByteField(PriorityQueue_DropPrecedenceColourMarking, UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16),
		},
		Access:  CreatedByOnu,
		Support: UnknownSupport,
		Alarms: AlarmMap{
			0: "Block loss",
		},
	}
}

// NewPriorityQueue (class ID 277) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewPriorityQueue(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*priorityqueueBME, params...)
}