/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// UniGClassID is the 16-bit ID for the OMCI
// Managed entity UNI-G
const UniGClassID = ClassID(264) // 0x0108

var unigBME *ManagedEntityDefinition

// UniG (Class ID: #264 / 0x0108)
//	This ME organizes data associated with UNIs supported by GEM. One instance of the UNI-G ME
//	exists for each UNI supported by the ONU.
//
//	The ONU automatically creates or deletes instances of this ME upon the creation or deletion of a
//	real or virtual circuit pack ME, one per port.
//
//	Relationships
//		An instance of the UNI-G ME exists for each instance of a PPTP ME.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
//			implicitly linked to an instance of a PPTP. (R) (mandatory) (2-bytes)
//
//		Deprecated
//			This attribute is not used. It should be set to 0 by the OLT and ignored by the ONU. (R,-W)
//			(mandatory) (2-bytes)
//
//		Administrative State
//			This attribute locks (1) and unlocks (0) the functions performed by this ME. Administrative
//			state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
//
//			NOTE - PPTP MEs also have an administrative state attribute. The user port is unlocked only if
//			both administrative state attributes are set to unlocked. It is recommended that this attribute
//			not be used: that the OLT set it to 0 and that the ONU ignore it.
//
//		Management Capability
//			An ONU may support the ability for some or all of its PPTPs to be managed either directly by the
//			OMCI or from a non-OMCI management environment such as [BBF TR-069]. This attribute advertises
//			the ONU's capabilities for each PPTP.
//
//			This attribute is an enumeration with the following code points:
//
//			0	OMCI only
//
//			1	Non-OMCI only. In this case, the PPTP may be visible to the OMCI, but only in a read-only
//			sense, e.g., for PM collection.
//
//			2	Both OMCI and non-OMCI
//
//			(R) (optional) (1-byte)
//
//		Non_Omci Management Identifier
//			Non-OMCI management identifier: If a PPTP can be managed either directly by the OMCI or a non-
//			OMCI management environment, this attribute specifies how it is in fact to be managed. This
//			attribute is either 0 (default-=-OMCI management), or it is a pointer to a VEIP, which in turn
//			links to a non-OMCI management environment. (R,-W) (optional) (2-bytes)
//
//		Relay Agent Options
//			%SL	In TR-101, this is called a slot. In an ONU, this variable refers to a shelf. It is
//			meaningful if the ONU has multiple shelves internally or is daisy-chained to multiple equipment
//			modules. The range of this variable is "0".. "99"
//
//			%SU	In TR-101, this is called a sub-slot. In fact, it represents a cardholder. The range of this
//			variable is "0".. "99"
//
//			%PO	UNI port number. The range of this variable is "0".. "999"
//
//			%AE	ATM or Ethernet. This variable can take on the values "atm" or "eth".
//
//			%SV	S-VID for Ethernet UNI, or ATM VPI for ATM UNI, as it exists on the DHCP request received
//			upstream across the UNI. Range "0".. "4096" for S-VID; range "0".. "255" for VPI. The value
//			"4096" indicates no S-VID tag.
//
//			%CV	C-VID (Q-VID) for Ethernet UNI or ATM VCI for ATM UNI, as it exists on the DHCP request
//			received upstream across the UNI. Range "0".. "4096" for C-VID; range "0".."65535" for VCI. The
//			value "4096" indicates no C-VID tag.
//
//			Spaces in the provisioned string are significant.
//
//			Example: if the large string were provisioned with the value
//
//			%01%SL/%SU/%PO:%AE/%SV.%CV<null>,
//
//			then the ONU would generate the following DHCP option 82 agent circuitID string for an Ethernet
//			UNI that sent a DHCP request with no S tag and C tag = 3210 on shelf 2, slot 3, port 4.
//
//			2/3/4:eth/4096.3210
//
//			With the same provisioning, the ONU would generate the following DHCP option 82 agent circuit-ID
//			string for an ATM UNI that sent a DHCP request on VPI = 123 and VCI = 4567 on shelf 2, slot 3,
//			port 4.
//
//			2/3/4:atm/123.4567
//
//			This attribute is a pointer to a large string ME whose content specifies one or more DHCP relay
//			agent options. (R, W) (optional) (2-bytes)
//
//			The contents of the large string are parsed by the ONU and converted into text strings. Variable
//			substitution is based on defined three-character groups, each of which begins with the '%'
//			character. The string '%%' is an escape mechanism whose output is a single '%' character. When
//			the ONU cannot perform variable substitution on a substring of the large string, it generates
//			the specified option as an exact quotation of the provisioned substring value.
//
//			Provisioning of the large string is separate from the operation of setting the pointer in this
//			attribute. It is the responsibility of the OLT to ensure that the large string contents are
//			correct and meaningful.
//
//			Three-character variable definitions are as follows. The first variable in the large string must
//			specify one of the option types. Both options for a given IP version may be present if desired,
//			each introduced by its option identifier. Terminology is taken from clause 3.9.3 of [b-BBF
//			TR-101].
//
//			%01, %18 Specifies that the following string is for option 82 sub-option 1, agent circuit-ID
//			(IPv4) or option 18, interface-ID (IPv6). The equivalence permits the same large string to be
//			used in both IP environments.
//
//			%02, %37 Specifies that the following string is for option 82 sub-option 2, relay agent remote-
//			ID (IPv4) or option 37, relay agent remoteID (IPv6). The equivalence permits the same large
//			string to be used in both IP environments.
//
type UniG struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const UniG_Deprecated = "Deprecated"
const UniG_AdministrativeState = "AdministrativeState"
const UniG_ManagementCapability = "ManagementCapability"
const UniG_NonOmciManagementIdentifier = "NonOmciManagementIdentifier"
const UniG_RelayAgentOptions = "RelayAgentOptions"

func init() {
	unigBME = &ManagedEntityDefinition{
		Name:    "UniG",
		ClassID: UniGClassID,
		MessageTypes: mapset.NewSetWith(
			Get,
			Set,
		),
		AllowedAttributeMask: 0xf800,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
			1: Uint16Field(UniG_Deprecated, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, true, 1),
			2: ByteField(UniG_AdministrativeState, EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
			3: ByteField(UniG_ManagementCapability, EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, true, false, 3),
			4: Uint16Field(UniG_NonOmciManagementIdentifier, PointerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
			5: Uint16Field(UniG_RelayAgentOptions, PointerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5),
		},
		Access:  CreatedByOnu,
		Support: UnknownSupport,
	}
}

// NewUniG (class ID 264) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewUniG(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*unigBME, params...)
}