/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// VlanTaggingOperationConfigurationDataClassID is the 16-bit ID for the OMCI
// Managed entity VLAN tagging operation configuration data
const VlanTaggingOperationConfigurationDataClassID = ClassID(78) // 0x004e

var vlantaggingoperationconfigurationdataBME *ManagedEntityDefinition

// VlanTaggingOperationConfigurationData (Class ID: #78 / 0x004e)
//	This ME organizes data associated with VLAN tagging. Instances of this ME are created and
//	deleted by the OLT.
//
//	NOTE 1 - The extended VLAN tagging operation configuration data of clause 9.3.13 is preferred
//	for new implementations.
//
//	Relationships
//		Zero or one instance of this ME may exist for an instance of any ME that can terminate or modify
//		an Ethernet stream.////		When this ME is associated with a UNI-side TP, it performs its upstream classification and
//		tagging operations before offering the upstream frame to other filtering, bridging or switching
//		functions. In the downstream direction, the defined inverse operation is the last operation
//		performed on the frame before offering it to the UNI-side termination.////		When this ME is associated with an ANI-side TP, it performs its upstream classification and
//		tagging operations as the last step before queueing for transmission to the OLT, after having
//		received the upstream frame from other filtering, bridging or switching functions. In the
//		downstream direction, the defined inverse operation is the first operation performed on the
//		frame before offering it to possible filter, bridge or switch functions.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. When the optional association type
//			attribute is 0 or undefined, this attribute's value is the same as the ID of the ME with which
//			this VLAN tagging operation configuration data instance is associated, which may be either a
//			PPTP Ethernet UNI or an IP host config data or an IPv6 host config data ME. Otherwise, the value
//			of the ME ID is unconstrained except by the need to be unique. (R, set-by-create) (mandatory) (2
//			bytes)
//
//		Upstream Vlan Tagging Operation Mode
//			This attribute controls upstream VLAN tagging. Valid values are as follows.
//
//			0	Upstream frame is sent as is, regardless of tag.
//
//			1	The upstream frame is tagged, whether or not the received frame was tagged. A tagged frame's
//			TCI is overwritten with the upstream VLAN tag TCI value. An untagged frame is prepended with a
//			tag whose values are taken from the upstream VLAN tag TCI value attribute.
//
//			2	A tag is prepended to the upstream frame, whether or not the received frame was tagged. If the
//			received frame is tagged, a second tag (Q-in-Q) is added to the frame. If the received frame is
//			not tagged, a tag is attached to the frame. The added tag is defined by the upstream VLAN tag
//			TCI value attribute.
//
//			(R,-W, setbycreate) (mandatory) (1-byte)
//
//		Upstream Vlan Tag Tci Value
//			This attribute specifies the TCI for upstream VLAN tagging. It is used when the upstream VLAN
//			tagging operation mode is 1 or 2. (R,-W, setbycreate) (mandatory) (2-bytes)
//
//		Downstream Vlan Tagging Operation Mode
//			This attribute controls downstream VLAN tagging. Valid values are as follows.
//
//			0	Downstream frame is sent as is, regardless of tag.
//
//			1	If the received frame is tagged, the outer tag is stripped. An untagged frame is forwarded
//			unchanged.
//
//			(R,-W, setbycreate) (mandatory) (1-byte)
//
//		Association Type
//			This attribute specifies the type of ME that is associated with this VLAN tagging operation
//			configuration data ME. Values are assigned in accordance with the following list.
//
//			0	(Default) Physical path termination point Ethernet UNI (for backward compatibility, may also
//			be an IP host config data ME; they must not have the same ME ID). The associated ME instance is
//			implicit; its identifier is the same as that of this VLAN tagging operation configuration data.
//
//			1	IP host config data or IPv6 host config data
//
//			2	IEEE 802.1p mapper service profile
//
//			3	MAC bridge port configuration data
//
//			4	Physical path termination point xDSL UNI
//
//			5	GEM IW termination point
//
//			6	Multicast GEM IW termination point
//
//			7	Physical path termination point MoCA UNI
//
//			8	Reserved
//
//			9	Ethernet flow termination point
//
//			10	Physical path termination point Ethernet UNI
//
//			11	Virtual Ethernet interface point
//
//			12	MPLS pseudowire termination point
//
//			13	EFM bonding group
//
//			The associated ME instance is identified by the associated ME pointer. (R,-W, setbycreate)
//			(optional) (1-byte)
//
//		Associated Me Pointer
//			When the association type attribute is non-zero, this attribute points to the ME with which this
//			VLAN tagging operation configuration data ME is associated. Otherwise, this attribute is
//			undefined, and the association is implicit through the ME ID. (R,-W, setbycreate) (optional)
//			(2-bytes)
//
//			NOTE 2 - Implicit association is retained for legacy compatibility. Explicit pointers are
//			preferred for new implementations.
//
//			NOTE 3 - When the association type is xDSL, the two MSBs may be used to indicate a bearer
//			channel.
//
type VlanTaggingOperationConfigurationData struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const VlanTaggingOperationConfigurationData_UpstreamVlanTaggingOperationMode = "UpstreamVlanTaggingOperationMode"
const VlanTaggingOperationConfigurationData_UpstreamVlanTagTciValue = "UpstreamVlanTagTciValue"
const VlanTaggingOperationConfigurationData_DownstreamVlanTaggingOperationMode = "DownstreamVlanTaggingOperationMode"
const VlanTaggingOperationConfigurationData_AssociationType = "AssociationType"
const VlanTaggingOperationConfigurationData_AssociatedMePointer = "AssociatedMePointer"

func init() {
	vlantaggingoperationconfigurationdataBME = &ManagedEntityDefinition{
		Name:    "VlanTaggingOperationConfigurationData",
		ClassID: VlanTaggingOperationConfigurationDataClassID,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
		),
		AllowedAttributeMask: 0xf800,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1: ByteField(VlanTaggingOperationConfigurationData_UpstreamVlanTaggingOperationMode, EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
			2: Uint16Field(VlanTaggingOperationConfigurationData_UpstreamVlanTagTciValue, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3: ByteField(VlanTaggingOperationConfigurationData_DownstreamVlanTaggingOperationMode, EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
			4: ByteField(VlanTaggingOperationConfigurationData_AssociationType, EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
			5: Uint16Field(VlanTaggingOperationConfigurationData_AssociatedMePointer, PointerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
	}
}

// NewVlanTaggingOperationConfigurationData (class ID 78) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewVlanTaggingOperationConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*vlantaggingoperationconfigurationdataBME, params...)
}