diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/ani-g.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/ani-g.go
new file mode 100644
index 0000000..0e13c5c
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/ani-g.go
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// AniGClassID is the 16-bit ID for the OMCI
+// Managed entity ANI-G
+const AniGClassID = ClassID(263) // 0x0107
+
+var anigBME *ManagedEntityDefinition
+
+// AniG (Class ID: #263 / 0x0107)
+//	This ME organizes data associated with each access network interface supported by a GPON ONU.
+//	The ONU automatically creates one instance of this ME for each PON physical port.
+//
+//	Relationships
+//		An instance of this ME is associated with each instance of a physical PON interface.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Its value indicates the physical
+//			position of the PON interface. The first byte is the slot ID, defined in clause 9.1.5. The
+//			second byte is the port ID. (R) (mandatory) (2-bytes)
+//
+//		Sr Indication
+//			This Boolean attribute indicates the ONU's capability to report queue status for DBA. The value
+//			true means that status reporting is available for all TCONTs that are associated with the ANI.
+//			(R) (mandatory) (1-byte)
+//
+//		Total TCont Number
+//			This attribute indicates the total number of T-CONTs that can be supported on this ANI. (R)
+//			(mandatory) (2-bytes)
+//
+//		Gem Block Length
+//			This attribute specifies the queue occupancy reporting granularity for DBA, expressed in bytes.
+//			This attribute is meaningful only in ITUT G.984.x systems. (R, W) (mandatory) (2 bytes)
+//
+//			In ITU-T G.984 systems, the value set by the OLT is used by all TCONTs on this ANI. Upon ME
+//			instantiation, the ONU sets this attribute to 48. See [ITUT G.984.3] for further details.
+//
+//			In all other ITU-T PON systems, the unit for queue occupancy reporting is fixed in at 4-bytes by
+//			the respective TC layer specification.
+//
+//		Piggyback Dba Reporting
+//			This attribute indicates the ONU's piggyback DBA reporting format capabilities. [ITUT G.984.3]
+//			defines two possible piggyback reporting modes. For reporting mode 0, the single field is the
+//			entire report. For reporting mode 1, the DBA report is two fields long. Mode 0 is mandatory for
+//			ITU-T G.984 ONUs that support piggyback DBA reporting; mode 1 is optional. Subsequent PON
+//			specifications allows only one mode, which should be reported in this attribute as code point 0.
+//
+//			The following coding indicates the ONU's piggyback DBA reporting mode capabilities:
+//
+//			0	Mode 0 only
+//
+//			1	Modes 0 and 1
+//
+//			2	Deprecated
+//
+//			3	Deprecated
+//
+//			4	Piggyback DBA reporting not supported
+//
+//			(R) (mandatory) (1-byte)
+//
+//		Deprecated
+//			This attribute should be set to 0 by the ONU and ignored by the OLT. (R) (mandatory) (1-byte)
+//
+//		Signal Fail Threshold
+//			Signal fail (SF) threshold: This attribute specifies the downstream bit error rate (BER)
+//			threshold to detect the SF alarm. When this value is y, the BER threshold is 10-y. Valid values
+//			are 3..8. Upon ME instantiation, the ONU sets this attribute to 5. (R,-W) (mandatory) (1-byte)
+//
+//		Signal Degrade Threshold
+//			Signal degrade (SD) threshold: This attribute specifies the downstream BER threshold to detect
+//			the SD alarm. When this value is x, the BER threshold for SD is 10-x. Valid values are 4..10.
+//			The SD threshold must be lower than the SF threshold; i.e., x-> y. Upon ME instantiation, the
+//			ONU sets this attribute to 9. (R,-W) (mandatory) (1-byte)
+//
+//		Arc
+//			See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Arc Interval
+//			See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Optical Signal Level
+//			This attribute reports the current measurement of the total downstream optical signal level. Its
+//			value is a 2s complement integer referred to 1- mW (i.e., 1-dBm), with 0.002 dB granularity. (R)
+//			(optional) (2-bytes)
+//
+//		Lower Optical Threshold
+//			This attribute specifies the optical level the ONU uses to declare the downstream low received
+//			optical power alarm. Valid values are  -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB
+//			increments. The default value 0xFF selects the ONU's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Upper Optical Threshold
+//			This attribute specifies the optical level the ONU uses to declare the downstream high received
+//			optical power alarm. Valid values are  -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB
+//			increments. The default value 0xFF selects the ONU's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Onu Response Time
+//			This attribute indicates the ONU's actual response time. This attribute is in the range
+//			34..36-us. Although this attribute is expressed in nanoseconds, its accuracy is likely to be
+//			more coarse. Furthermore, the value may change from one activation cycle to the next. Valid
+//			values are:
+//
+//			0 (Null, function not supported)
+//
+//			34000 to 36000 (response time in nanoseconds)
+//
+//			All other values reserved
+//
+//			(R) (optional) (2-bytes)
+//
+//		Transmit Optical Level
+//			This attribute reports the current measurement of mean optical launch power. Its value is a 2s
+//			complement integer referred to 1-mW (i.e., 1-dBm), with 0.002 dB granularity. (R) (optional)
+//			(2-bytes)
+//
+//		Lower Transmit Power Threshold
+//			This attribute specifies the minimum mean optical launch power that the ONU uses to declare the
+//			low transmit optical power alarm. Its value is a 2s complement integer referred to 1-mW (i.e.,
+//			dBm), with 0.5-dB granularity. The default value -63.5 (0x81) selects the ONU's internal policy.
+//			(R,-W) (optional) (1-byte)
+//
+//		Upper Transmit Power Threshold
+//			This attribute specifies the maximum mean optical launch power that the ONU uses to declare the
+//			high transmit optical power alarm. Its value is a 2s complement integer referred to 1-mW (i.e.,
+//			dBm), with 0.5-dB granularity. The default value -63.5 (0x81) selects the ONU's internal policy.
+//			(R,-W) (optional) (1-byte)
+//
+type AniG struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	anigBME = &ManagedEntityDefinition{
+		Name:    "AniG",
+		ClassID: 263,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			Set,
+			Test,
+		),
+		AllowedAttributeMask: 0xffff,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("SrIndication", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+			2:  Uint16Field("TotalTcontNumber", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+			3:  Uint16Field("GemBlockLength", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
+			4:  ByteField("PiggybackDbaReporting", EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+			5:  ByteField("Deprecated", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, true, 5),
+			6:  ByteField("SignalFailThreshold", UnsignedIntegerAttributeType, 0x0400, 5, mapset.NewSetWith(Read, Write), false, false, false, 6),
+			7:  ByteField("SignalDegradeThreshold", UnsignedIntegerAttributeType, 0x0200, 9, mapset.NewSetWith(Read, Write), false, false, false, 7),
+			8:  ByteField("Arc", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), true, true, false, 8),
+			9:  ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+			10: Uint16Field("OpticalSignalLevel", SignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10),
+			11: ByteField("LowerOpticalThreshold", SignedIntegerAttributeType, 0x0020, 255, mapset.NewSetWith(Read, Write), false, true, false, 11),
+			12: ByteField("UpperOpticalThreshold", SignedIntegerAttributeType, 0x0010, 255, mapset.NewSetWith(Read, Write), false, true, false, 12),
+			13: Uint16Field("OnuResponseTime", UnsignedIntegerAttributeType, 0x0008, 35000, mapset.NewSetWith(Read), false, true, false, 13),
+			14: Uint16Field("TransmitOpticalLevel", SignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14),
+			15: ByteField("LowerTransmitPowerThreshold", SignedIntegerAttributeType, 0x0002, 129, mapset.NewSetWith(Read, Write), false, true, false, 15),
+			16: ByteField("UpperTransmitPowerThreshold", SignedIntegerAttributeType, 0x0001, 129, mapset.NewSetWith(Read, Write), false, true, false, 16),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+		Alarms: AlarmMap{
+			0: "Low received optical power",
+			1: "High received optical power",
+			2: "SF",
+			3: "SD",
+			4: "Low transmit optical power",
+			5: "High transmit optical power",
+			6: "Laser bias current",
+		},
+	}
+}
+
+// NewAniG (class ID 263) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewAniG(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*anigBME, params...)
+}