[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/circuitpack.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/circuitpack.go
new file mode 100644
index 0000000..0fa6a4e
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/circuitpack.go
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// CircuitPackClassID is the 16-bit ID for the OMCI
+// Managed entity Circuit pack
+const CircuitPackClassID = ClassID(6) // 0x0006
+
+var circuitpackBME *ManagedEntityDefinition
+
+// CircuitPack (Class ID: #6 / 0x0006)
+// This ME models a real or virtual circuit pack that is equipped in a real or virtual ONU slot.
+// For ONUs with integrated interfaces, this ME may be used to distinguish available types of
+// interfaces (the port-mapping package is another way).
+//
+// For ONUs with integrated interfaces, the ONU automatically creates an instance of this ME for
+// each instance of the virtual cardholder ME. The ONU also creates an instance of this ME when the
+// OLT provisions the cardholder to expect a circuit pack, i.e., when the OLT sets the expected
+// plug-in unit type or equipment ID of the cardholder to a circuit pack type, as defined in Table
+// 9.1.5-1. The ONU also creates an instance of this ME when a circuit pack is installed in a
+// cardholder whose expected plug-in unit type is 255-= plugandplay, and whose equipment ID is not
+// provisioned. Finally, when the cardholder is provisioned for plug-and-play, an instance of this
+// ME can be created at the request of the OLT.
+//
+// The ONU deletes an instance of this ME when the OLT de-provisions the circuit pack (i.e., when
+// the OLT sets the expected plug-in unit type or equipment ID of the cardholder to 0-= no LIM).
+// The ONU also deletes an instance of this ME on request of the OLT if the expected plug-in unit
+// type attribute of the corresponding cardholder is equal to 255, plug-and-play, and the expected
+// equipment ID is blank (a string of all spaces). ONUs with integrated interfaces do not delete
+// circuit pack instances.
+//
+// NOTE - Creation and deletion by the OLT is retained for backward compatibility.
+//
+// Relationships
+// An instance of this ME is contained by an instance of the cardholder ME.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. Its value is the same as that of
+// the cardholder ME containing this circuit pack instance. (R, setbycreate if applicable)
+// (mandatory) (2-bytes)
+//
+// Type
+// This attribute identifies the circuit pack type. This attribute is a code as defined in Table
+// 9.1.5-1. The value 255 means unknown or undefined, i.e., the inserted circuit pack is not
+// recognized by the ONU or is not mapped to an entry in Table 9.1.5-1. In the latter case, the
+// equipment ID attribute may contain inventory information. Upon autonomous ME instantiation, the
+// ONU sets this attribute to 0 or to the type of the circuit pack that is physically present. (R,
+// setbycreate if applicable) (mandatory) (1-byte)
+//
+// Number Of Ports
+// This attribute is the number of access ports on the circuit pack. If the port-mapping package is
+// supported for this circuit pack, this attribute should be set to the total number of ports of
+// all types. (R) (optional) (1-byte)
+//
+// Serial Number
+// The serial number is expected to be unique for each circuit pack, at least within the scope of
+// the given vendor. Note that the serial number may contain the vendor ID or version number. For
+// integrated ONUs, this value is identical to the value of the serial number attribute of the
+// ONU-G ME. Upon creation in the absence of a physical circuit pack, this attribute comprises all
+// spaces. (R) (mandatory) (8-bytes)
+//
+// Version
+// This attribute is a string that identifies the version of the circuit pack as defined by the
+// vendor. The value 0 indicates that version information is not available or applicable. For
+// integrated ONUs, this value is identical to the value of the version attribute of the ONU-G ME.
+// Upon creation in the absence of a physical circuit pack, this attribute comprises all spaces.
+// (R) (mandatory) (14-bytes)
+//
+// Vendor Id
+// This attribute identifies the vendor of the circuit pack. For ONUs with integrated interfaces,
+// this value is identical to the value of the vendor ID attribute of the ONU-G ME. Upon creation
+// in the absence of a physical circuit pack, this attribute comprises all spaces. (R) (optional)
+// (4-bytes)
+//
+// Administrative State
+// This attribute locks (1) and unlocks (0) the functions performed by this ME. Administrative
+// state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+// Operational State
+// This attribute indicates whether the circuit pack is capable of performing its function. Valid
+// values are enabled (0), disabled (1) and unknown (2). Pending completion of initialization and
+// self-test on an installed circuit pack, the ONU sets this attribute to 2. (R) (optional)
+// (1-byte)
+//
+// Bridged Or Ip Ind
+// This attribute specifies whether an Ethernet interface is bridged or derived from an IP router
+// function.
+//
+// 0 Bridged
+//
+// 1 IP router
+//
+// 2 Both bridged and IP router functions
+//
+// (R,-W) (optional, only applicable for circuit packs with Ethernet interfaces) (1-byte)
+//
+// Equipment Id
+// This attribute may be used to identify the vendor's specific type of circuit pack. In some
+// environments, this attribute may include the CLEI code. Upon ME instantiation, the ONU sets this
+// attribute to all spaces or to the equipment ID of the circuit pack that is physically present.
+// (R) (optional) (20-bytes)
+//
+// Card Configuration
+// This attribute selects the appropriate configuration of configurable circuit packs. Table
+// 9.1.5-1 specifies two configurable card types: C-DS1/E1 (code 16), and C-DS1/E1/J1 (code 17).
+// Values are indicated below for the allowed card types and configurations.
+//
+// Upon autonomous instantiation, this attribute is set to 0. (R,-W, setbycreate if applicable)
+// (mandatory for configurable circuit packs) (1-byte)
+//
+// Total T_Cont Buffer Number
+// Total T-CONT buffer number: This attribute reports the total number of T-CONT buffers associated
+// with the circuit pack. Upon ME instantiation, the ONU sets this attribute to 0 or to the value
+// supported by the physical circuit pack. (R) (mandatory for circuit packs that provide a traffic
+// scheduler function) (1-byte)
+//
+// Total Priority Queue Number
+// This value reports the total number of priority queues associated with the circuit pack. Upon ME
+// instantiation, the ONU sets the attribute to 0 or to the value supported by the physical circuit
+// pack. (R) (mandatory for circuit packs that provide a traffic scheduler function) (1-byte)
+//
+// Total Traffic Scheduler Number
+// This value reports the total number of traffic schedulers associated with the circuit pack. The
+// ONU supports null function, strict priority scheduling and WRR from the priority control, and
+// guarantee of minimum rate control points of view. If the circuit pack has no traffic scheduler,
+// this attribute should be absent or have the value 0. Upon ME instantiation, the ONU sets the
+// attribute to 0 or to the value supported by the physical circuit pack. (R) (mandatory for
+// circuit packs that provide a traffic scheduler function) (1-byte)
+//
+// Power Shed Override
+// This attribute allows ports to be excluded from the power shed control defined in clause 9.1.7.
+// It is a bit mask that takes port 1 as the MSB; a bit value of 1 marks the corresponding port to
+// override the power shed timer. For hardware that cannot shed power per port, this attribute is a
+// slot override rather than a port override, with any non-zero port value causing the entire
+// circuit pack to override power shedding. (R,-W) (optional) (4-bytes)
+//
+type CircuitPack struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ circuitpackBME = &ManagedEntityDefinition{
+ Name: "CircuitPack",
+ ClassID: 6,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ Create,
+ Delete,
+ ),
+ AllowedAttributeMask: 0xfffc,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("Type", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 1),
+ 2: ByteField("NumberOfPorts", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, true, false, 2),
+ 3: MultiByteField("SerialNumber", OctetsAttributeType, 0x2000, 8, toOctets("ICAgICAgICA="), mapset.NewSetWith(Read), false, false, false, 3),
+ 4: MultiByteField("Version", OctetsAttributeType, 0x1000, 14, toOctets("ICAgICAgICAgICAgICA="), mapset.NewSetWith(Read), false, false, false, 4),
+ 5: MultiByteField("VendorId", StringAttributeType, 0x0800, 4, toOctets("ICAgIA=="), mapset.NewSetWith(Read), false, true, false, 5),
+ 6: ByteField("AdministrativeState", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: ByteField("OperationalState", EnumerationAttributeType, 0x0200, 2, mapset.NewSetWith(Read), true, true, false, 7),
+ 8: ByteField("BridgedOrIpInd", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+ 9: MultiByteField("EquipmentId", StringAttributeType, 0x0080, 20, toOctets("ICAgICAgICAgICAgICAgICAgICA="), mapset.NewSetWith(Read), false, true, false, 9),
+ 10: ByteField("CardConfiguration", EnumerationAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+ 11: ByteField("TotalTContBufferNumber", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
+ 12: ByteField("TotalPriorityQueueNumber", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
+ 13: ByteField("TotalTrafficSchedulerNumber", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
+ 14: Uint32Field("PowerShedOverride", BitFieldAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "Equipment alarm",
+ 1: "Powering alarm",
+ 2: "Self-test failure",
+ 3: "Laser end of life",
+ 4: "Temperature yellow",
+ 5: "Temperature red",
+ },
+ }
+}
+
+// NewCircuitPack (class ID 6) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewCircuitPack(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*circuitpackBME, params...)
+}