[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agcfmstack.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agcfmstack.go
new file mode 100644
index 0000000..08dda58
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agcfmstack.go
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Dot1AgCfmStackClassID is the 16-bit ID for the OMCI
+// Managed entity Dot1ag CFM stack
+const Dot1AgCfmStackClassID = ClassID(305) // 0x0131
+
+var dot1agcfmstackBME *ManagedEntityDefinition
+
+// Dot1AgCfmStack (Class ID: #305 / 0x0131)
+// This ME reports the maintenance status of a bridge port at any given time. An ONU that supports
+// [IEEE 802.1ag] functionality automatically creates an instance of the dot1ag CFM stack ME for
+// each MAC bridge or IEEE 802.1p mapper, depending on its provisioning model.
+//
+// The dot1ag CFM stack also lists any VLANs and bridge ports against which configuration errors
+// are currently identified. The ONU should reject operations that create configuration errors.
+// However, these errors can arise because of operations on other MEs that are not necessarily
+// possible to detect during CFM configuration.
+//
+// Relationships
+// An ONU that supports [IEEE 802.1ag] creates one instance of this ME for each MAC bridge or IEEE
+// 802.1p mapper, depending on its provisioning model. It should not create an instance for an
+// IEEE-802.1p mapper that is associated with a MAC bridge.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies an instance of this ME. Through an identical ID, this ME is
+// implicitly linked to an instance of the MAC bridge service profile ME or an IEEE 802.1p mapper
+// ME. It is expected that an ONU will implement CFM on bridges or on IEEE-802.1p mappers, but not
+// both. For precision, the reference is disambiguated by the value of the layer 2 type pointer
+// attribute. (R) (mandatory) (2-bytes)
+//
+// Layer 2 Type
+// This attribute specifies whether the dot1ag CFM stack is associated with a MAC bridge service
+// profile (value 0) or an IEEE 802.1p mapper (value 1). (R) (mandatory) (1-byte)
+//
+// Mp Status Table
+// This attribute is a list of entries, each entry reporting one aspect of the maintenance status
+// of one port. If a port is associated with more than one CFM maintenance entity, each is
+// represented as a separate item in this table attribute; a port that has no current maintenance
+// functions is not represented in the table (so the table may be empty). Each entry is defined as
+// follows.
+//
+// Port ID: The ME ID of the MAC bridge port config data whose information is reported in this
+// entry. If the layer 2 parent is an IEEE 802.1p mapper, a null pointer. (2-bytes)
+//
+// Level: The level at which the reported maintenance function exists, 0..7. (1-byte)
+//
+// Direction: The value 1 (down) or 2 (up). (1-byte)
+//
+// VLAN ID: If this table entry reports a maintenance function associated with a VLAN, this field
+// contains the value of the primary VLAN ID. If no VLAN is associated with this entry, this field
+// contains the value 0. (2-bytes)
+//
+// MD: A pointer to the associated dot1ag maintenance domain ME. If no MD is associated with this
+// entry, a null pointer. (2-bytes)
+//
+// MA: A pointer to the associated dot1ag maintenance association ME. If no MA is associated with
+// this entry, a null pointer. (2-bytes)
+//
+// MEP ID: If this table entry reports an MEP, this field contains the value of its MEP ID (range
+// 1..8191). If this table entry reports an MHF, this field contains the value 0. (2-bytes)
+//
+// MAC address: The MAC address of the MP. (6-bytes)
+//
+// (R) (mandatory) (18N bytes)
+//
+// Configuration Error List Table
+// This attribute is based on the [IEEE 802.1ag] configuration error list. It is a list of entries,
+// each entry reporting a VLAN and a bridge port against which a configuration error has been
+// detected. The table may be empty at any given time. Entries are defined as follows:
+//
+// VLAN ID: If this table entry reports a maintenance function associated with a VLAN, this field
+// contains the value of the VLAN ID in error. If no VLAN is associated with this entry, this field
+// contains the value 0. (2-bytes)
+//
+// Port ID: A pointer to the MAC bridge port config data whose information is reported in this
+// entry. If the layer 2 parent is an IEEE 802.1p mapper, a null pointer. (2-bytes)
+//
+// Detected configuration error: A bit mask with the following meanings. A list entry exists if and
+// only if at least one of these bits is set. Definitions appear in clause 22.2.4 of [IEEE
+// 802.1ag]: (1-byte)
+//
+// 0x01 CFM leak. MA x is associated with a specific VID list, one or more of the VIDs in MA x can
+// pass through the bridge port, no up MEP is configured for MA x on the bridge port, no down MEP
+// is configured on any bridge port for MA x, and another MA y, at a higher MD level than MA x, and
+// associated with at least one of the VID(s) also in MA x, does have an MEP configured on the
+// bridge port.
+//
+// 0x02 Conflicting VIDs. MA x is associated with a specific VID list, an up MEP is configured on
+// MA x on the bridge port, and another MA y, associated with at least one of the VID(s) also in MA
+// x, and at the same MD level as MA x, also has an up MEP configured on some bridge port.
+//
+// 0x04 Excessive levels. The number of different MD levels at which maintenance domain
+// intermediate points (MIPs) are to be created on this port exceeds the bridge's capabilities.
+//
+// 0x08 Overlapped levels. An MEP is created for one VID at one MD level, but an MEP is also
+// configured on another VID at that MD level or higher, exceeding the bridge's capabilities.
+//
+// (R) (mandatory) (5N bytes)
+//
+type Dot1AgCfmStack struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ dot1agcfmstackBME = &ManagedEntityDefinition{
+ Name: "Dot1AgCfmStack",
+ ClassID: 305,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ GetNext,
+ ),
+ AllowedAttributeMask: 0xe000,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("Layer2Type", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+ 2: TableField("MpStatusTable", TableAttributeType, 0x4000, TableInfo{nil, 18}, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: TableField("ConfigurationErrorListTable", TableAttributeType, 0x2000, TableInfo{nil, 5}, mapset.NewSetWith(Read), true, false, false, 3),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewDot1AgCfmStack (class ID 305) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewDot1AgCfmStack(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*dot1agcfmstackBME, params...)
+}