diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agchassis-managementinfo.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agchassis-managementinfo.go
new file mode 100644
index 0000000..75d0106
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agchassis-managementinfo.go
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Dot1AgChassisManagementInfoClassID is the 16-bit ID for the OMCI
+// Managed entity Dot1ag chassis-management info
+const Dot1AgChassisManagementInfoClassID = ClassID(306) // 0x0132
+
+var dot1agchassismanagementinfoBME *ManagedEntityDefinition
+
+// Dot1AgChassisManagementInfo (Class ID: #306 / 0x0132)
+//	This ME represents the system-level chassis ID or management address for [IEEE-802.1ag] CFM
+//	messages, and potentially for other IEEE 802-based functions. Although [IEEE-802.1AB] allows for
+//	several management addresses (synonyms in different formats or with granularity to the component
+//	level), [IEEE-802.1ag] does not provide for more than one. Nor is it expected that an ONU would
+//	require more than one format. Accordingly, this ME provides for only one.
+//
+//	According to sender ID permission attributes in several dot1ag MEs, transmitted IEEE-802.1ag CFM
+//	messages may include either or both of the chassis ID or management address
+//	fields.[IEEE-802.1ag] requires that CCMs do not exceed 128-bytes, of which 74 are separately
+//	allocated to other purposes; the sender ID TLV, if present, must accommodate this requirement.
+//	The chassis info and management info must fit, with a minimum of 4 additional overhead bytes,
+//	into the remaining 54-bytes. This limit is exploited in defining the maximum size of the ME's
+//	attributes.
+//
+//	Relationships
+//		If an ONU supports [IEEE 802.1ag] functionality, it automatically creates an instance of this
+//		ME.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies this ME. There is at most one instance, whose value is 0. (R)
+//			(mandatory) (2-bytes)
+//
+//		Chassis Id Length
+//			The length of the chassis ID attribute (not including the chassis ID subtype attribute), default
+//			value 0. (R,-W) (mandatory) (1-byte)
+//
+//		Chassis Id Subtype
+//			The format of the chassis ID attribute, default value 7, as defined in [IEEE 802.1AB]:
+//
+//			(R,-W) (mandatory) (1-byte)
+//
+//		Chassis ID Part 1
+//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
+//			by the chassis ID length attribute and whose value is the left-justified chassis ID. (R,-W)
+//			(mandatory) (25-bytes-*-2 attributes)
+//
+//		Chassis ID Part 2
+//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
+//			by the chassis ID length attribute and whose value is the left-justified chassis ID. (R,-W)
+//			(mandatory) (25-bytes-*-2 attributes)
+//
+//		Management Address Domain Length
+//			The length of the management address domain attribute, default value 0. If this attribute has
+//			the value 0, all of the other management address attributes are undefined. (R,-W) (mandatory)
+//			(1-byte)
+//
+//		Management Address Domain 1
+//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
+//			by the management address domain length attribute and whose value is the left-justified
+//			management address domain. The attribute is coded as an object identifier (OID) as per [ITUT
+//			X.690], referring to a TDomain as defined in [IETF RFC 2579]. Typical domain values include
+//			snmpUDPDomain (from SNMPv2-TM [IETF RFC 3417]) and snmpIeee802Domain (from SNMP-IEEE 802-TM-MIB
+//			[IETF RFC 4789]). (R,-W) (mandatory) (25-bytes * 2 attributes)
+//
+//		Management Address Domain 2
+//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
+//			by the management address domain length attribute and whose value is the left-justified
+//			management address domain. The attribute is coded as an object identifier (OID) as per [ITUT
+//			X.690], referring to a TDomain as defined in [IETF RFC 2579]. Typical domain values include
+//			snmpUDPDomain (from SNMPv2-TM [IETF RFC 3417]) and snmpIeee802Domain (from SNMP-IEEE 802-TM-MIB
+//			[IETF RFC 4789]). (R,-W) (mandatory) (25-bytes * 2 attributes)
+//
+//		Management Address Length
+//			The length of the management address attribute, default value 0. (R,-W) (mandatory) (1-byte)
+//
+//		Management Address 1
+//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
+//			by the management address length attribute and whose value is the left-justified management
+//			address. (R,-W) (mandatory) (25-bytes * 2 attributes)
+//
+//		Management Address 2
+//			These two attributes may be regarded as an octet string of up to 50-bytes whose length is given
+//			by the management address length attribute and whose value is the left-justified management
+//			address. (R,-W) (mandatory) (25-bytes * 2 attributes)
+//
+type Dot1AgChassisManagementInfo struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	dot1agchassismanagementinfoBME = &ManagedEntityDefinition{
+		Name:    "Dot1AgChassisManagementInfo",
+		ClassID: 306,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xffc0,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("ChassisIdLength", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+			2:  ByteField("ChassisIdSubtype", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+			3:  MultiByteField("ChassisIdPart1", OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3),
+			4:  MultiByteField("ChassisIdPart2", OctetsAttributeType, 0x1000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 4),
+			5:  ByteField("ManagementAddressDomainLength", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+			6:  MultiByteField("ManagementAddressDomain1", OctetsAttributeType, 0x0400, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 6),
+			7:  MultiByteField("ManagementAddressDomain2", OctetsAttributeType, 0x0200, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 7),
+			8:  ByteField("ManagementAddressLength", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+			9:  MultiByteField("ManagementAddress1", OctetsAttributeType, 0x0080, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 9),
+			10: MultiByteField("ManagementAddress2", OctetsAttributeType, 0x0040, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 10),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewDot1AgChassisManagementInfo (class ID 306) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewDot1AgChassisManagementInfo(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*dot1agchassismanagementinfoBME, params...)
+}