[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agmaintenanceassociation.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agmaintenanceassociation.go
new file mode 100644
index 0000000..b898665
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agmaintenanceassociation.go
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Dot1AgMaintenanceAssociationClassID is the 16-bit ID for the OMCI
+// Managed entity Dot1ag maintenance association
+const Dot1AgMaintenanceAssociationClassID = ClassID(300) // 0x012c
+
+var dot1agmaintenanceassociationBME *ManagedEntityDefinition
+
+// Dot1AgMaintenanceAssociation (Class ID: #300 / 0x012c)
+// This ME models an [IEEE 802.1ag] service defined on a bridge port. An MA is a set of endpoints
+// on opposite sides of a network, all existing at a defined maintenance level. One of the
+// endpoints resides on the local ONU; the others are understood to be configured in a consistent
+// way on external equipment. [ITUT Y.1731] refers to the MA as a maintenance entity group (MEG).
+//
+// An MA is created and deleted by the OLT.
+//
+// Relationships
+// Any number of MAs may be associated with a given MD, or may stand on their own without an MD.
+// One or more MAs may be associated with a MAC bridge or an IEEE 802.1p mapper. An MA exists at
+// one of eight possible maintenance levels.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies an instance of this ME. The values 0 and 0xFFFF are reserved.
+// (R, setbycreate) (mandatory) (2-bytes)
+//
+// Md Pointer
+// This pointer specifies the dot1ag maintenance domain with which this MA is associated. A null
+// pointer specifies that the MA is not associated with an MD. (R,-W, setbycreate) (mandatory)
+// (2-bytes)
+//
+// Short Ma Name Format
+// This attribute specifies one of several possible formats for the short MA name attribute. Value
+// 1, the primary VLAN ID, is recommended to be the default. (R,-W, setbycreate) (mandatory)
+// (1-byte)
+//
+// Short MA Name 1
+// These two attributes may be regarded as an octet string whose value is the left-justified MA
+// name. Because the MA name may or may not be a printable character string, an octet string is the
+// appropriate representation. If the short MA name format specifies a character string, the string
+// is null-terminated; otherwise, its length is determined by the short MA name format. Note that
+// binary comparisons of the short MA name are made in other CFM state machines, so blanks,
+// alphabetic case, etc., are significant. Also, note that the MD name and the MA short name must
+// be packed (with additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory) (25-bytes
+// * 2 attributes)
+//
+// Short MA Name 2
+// These two attributes may be regarded as an octet string whose value is the left-justified MA
+// name. Because the MA name may or may not be a printable character string, an octet string is the
+// appropriate representation. If the short MA name format specifies a character string, the string
+// is null-terminated; otherwise, its length is determined by the short MA name format. Note that
+// binary comparisons of the short MA name are made in other CFM state machines, so blanks,
+// alphabetic case, etc., are significant. Also, note that the MD name and the MA short name must
+// be packed (with additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory) (25-bytes
+// * 2 attributes)
+//
+// Continuity Check Message Ccm Interval
+// 3: 100 ms
+//
+// 4: 1 s
+//
+// 5: 10 s
+//
+// 6: 1 min
+//
+// 7: 10 min
+//
+// Short intervals should be used judiciously, as they can interfere with the network's ability to
+// handle subscriber traffic. The recommended value is 1-s. (R,-W, setbycreate) (mandatory)
+// (1-byte)
+//
+// Continuity check message (CCM) interval: If CCMs are enabled on an MEP, the CCM interval
+// attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs
+// from each of the other MEPs in its CC database at this rate.
+//
+// 0: CCM transmission disabled
+//
+// 1: 3.33 ms
+//
+// 2: 10 ms
+//
+// Associated Vlans
+// This attribute is a list of up to 12 VLAN IDs with which this MA is associated. Once a set of
+// VLANs is defined, the ONU should deny operations to other dot1ag MAs or dot1ag default MD level
+// entries that conflict with the set membership. The all-zeros value indicates that this MA is not
+// associated with any VLANs. Assuming that the attribute is not 0, the first entry is understood
+// to be the primary VLAN. Except forwarded linktrace messages (LTMs), CFM messages emitted by MPs
+// in this MA are tagged with the primary VLAN ID. (R,-W) (mandatory) (2-bytes/entry *
+// 12-entries-=-24-bytes)
+//
+// Mhf Creation
+// This attribute determines whether the bridge creates an MHF, under circumstances defined in
+// clause 22.2.3 of [IEEE 802.1ag]. This attribute is an enumeration with the following values:
+//
+// 1 None. No MHFs are created on this bridge for this MA.
+//
+// 2 Default (IEEE 802.1ag term). The bridge can create MHFs on this VID on any port through which
+// the VID can pass.
+//
+// 3 Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass,
+// but only if an MEP exists at some lower maintenance level.
+//
+// 4 Defer. This value causes the ONU to use the setting of the parent MD. This is recommended to
+// be the default value.
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+type Dot1AgMaintenanceAssociation struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ dot1agmaintenanceassociationBME = &ManagedEntityDefinition{
+ Name: "Dot1AgMaintenanceAssociation",
+ ClassID: 300,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfe00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("MdPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("ShortMaNameFormat", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: MultiByteField("ShortMaName1", OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: MultiByteField("ShortMaName2", OctetsAttributeType, 0x1000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: ByteField("ContinuityCheckMessageCcmInterval", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint16Field("AssociatedVlans", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: ByteField("MhfCreation", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewDot1AgMaintenanceAssociation (class ID 300) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewDot1AgMaintenanceAssociation(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*dot1agmaintenanceassociationBME, params...)
+}