[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/equipmentextensionpackage.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/equipmentextensionpackage.go
new file mode 100644
index 0000000..22bca67
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/equipmentextensionpackage.go
@@ -0,0 +1,128 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// EquipmentExtensionPackageClassID is the 16-bit ID for the OMCI
+// Managed entity Equipment extension package
+const EquipmentExtensionPackageClassID = ClassID(160) // 0x00a0
+
+var equipmentextensionpackageBME *ManagedEntityDefinition
+
+// EquipmentExtensionPackage (Class ID: #160 / 0x00a0)
+// This ME supports optional extensions to circuit pack MEs. If the circuit pack supports these
+// features, the ONU creates and deletes this ME along with its associated real or virtual circuit
+// pack.
+//
+// Relationships
+// An equipment extension package may be contained by an ONU-G or cardholder.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+// implicitly linked to an instance of the ONU-G or cardholder. (R) (mandatory) (2-bytes)
+//
+// Environmental Sense
+// This attribute provisions an ONU that supports external sense points, e.g., physical security
+// detectors at an enclosure. Each pair of bits is defined as follows.
+//
+// 00 Sense point disabled (default)
+//
+// 01 Report contact closure
+//
+// 10 Report contact open
+//
+// 11 Sense point disabled (same as 00)
+//
+// If the byte is represented in binary as 0B hhgg ffee ddcc bbaa, bits hh correspond to sense
+// point 1, while bits aa correspond to sense point 8. (R,-W) (optional) (2-bytes)
+//
+// NOTE - Some specific sense point applications are already defined on the ONU-G ME. It is the
+// vendor's choice how to configure and report sense points that appear both generically and
+// specifically.
+//
+// Contact Closure Output
+// This attribute provisions an ONU that supports external contact closure outputs, e.g., sump pump
+// or air conditioner activation at an ONU enclosure. A contact point is said to be released when
+// it is not energized. Whether this corresponds to an open or a closed electrical circuit depends
+// on the ONU's wiring options. Upon ONU initialization, all contact points should go to the
+// released state.
+//
+// If the byte is represented in binary as 0B hhgg ffee ddcc bbaa, bits hh correspond to contact
+// output point 1, while bits aa correspond to contact output point 8.
+//
+// On write, the bits of this attribute have the following meaning.
+//
+// 0x No change to contact output point state
+//
+// 10 Release contact output point
+//
+// 11 Operate contact output point
+//
+// On read, the left bit in each pair should be set to 0 at the ONU and ignored at the OLT. The
+// right bit indicates a released output point with 0 and an operated contact point with 1. (R,-W)
+// (optional) (2-bytes)
+//
+type EquipmentExtensionPackage struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ equipmentextensionpackageBME = &ManagedEntityDefinition{
+ Name: "EquipmentExtensionPackage",
+ ClassID: 160,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xc000,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: Uint16Field("EnvironmentalSense", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, true, false, 1),
+ 2: Uint16Field("ContactClosureOutput", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, true, false, 2),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "Reserved",
+ 1: "Sense point 1",
+ 2: "Sense point 2",
+ 3: "Sense point 3",
+ 4: "Sense point 4",
+ 5: "Sense point 5",
+ 6: "Sense point 6",
+ 7: "Sense point 7",
+ 8: "Sense point 8",
+ },
+ }
+}
+
+// NewEquipmentExtensionPackage (class ID 160) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewEquipmentExtensionPackage(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*equipmentextensionpackageBME, params...)
+}