[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/ieee802.1pmapperserviceprofile.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/ieee802.1pmapperserviceprofile.go
new file mode 100644
index 0000000..989c783
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/ieee802.1pmapperserviceprofile.go
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Ieee8021PMapperServiceProfileClassID is the 16-bit ID for the OMCI
+// Managed entity IEEE 802.1p mapper service profile
+const Ieee8021PMapperServiceProfileClassID = ClassID(130) // 0x0082
+
+var ieee8021pmapperserviceprofileBME *ManagedEntityDefinition
+
+// Ieee8021PMapperServiceProfile (Class ID: #130 / 0x0082)
+// This ME associates the priorities of IEEE 802.1p [IEEE 802.1D] priority tagged frames with
+// specific connections. This ME directs upstream traffic to the designated GEM ports. Downstream
+// traffic arriving on any of the IEEE 802.1p mapper's GEM ports is directed to the mapper's root
+// TP. Other mechanisms exist to direct downstream traffic, specifically a direct pointer to a
+// downstream queue from the GEM port network CTP. If such an alternative is used, it should be
+// provisioned to be consistent with the flow model of the mapper.
+//
+// Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// At its root, an instance of this ME may be associated with zero or one instance of a PPTP UNI,
+// MAC bridge port configuration data, or any type of IW TP ME that carries IEEE 802 traffic. Each
+// of its eight branches is associated with zero or one GEM IW TP.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+// (2-bytes)
+//
+// Tp Pointer
+// This attribute points to an instance of the associated TP.
+//
+// If the optional TP type attribute is not supported, the TP pointer indicates bridging mapping
+// with the value 0xFFFF; the TP pointer may also point to a PPTP Ethernet UNI.
+//
+// The TP type value 0 also indicates bridging mapping, and the TP pointer should be set to 0xFFFF.
+//
+// In all other cases, the TP type is determined by the TP type attribute.
+//
+// (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Each of the following eight attributes points to the GEM IW TP associated with the stated P-bit
+// value. The null pointer 0xFFFF specifies that frames with the associated priority are to be
+// discarded.
+//
+// Interwork Tp Pointer For P_Bit Priority 0
+// Interwork TP pointer for P-bit priority 0: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 1
+// Interwork TP pointer for P-bit priority 1: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 2
+// Interwork TP pointer for P-bit priority 2: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 3
+// Interwork TP pointer for P-bit priority 3: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 4
+// Interwork TP pointer for P-bit priority 4: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 5
+// Interwork TP pointer for P-bit priority 5: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 6
+// Interwork TP pointer for P-bit priority 6: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 7
+// Interwork TP pointer for P-bit priority 7: (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Unmarked Frame Option
+// This attribute specifies how the ONU should handle untagged Ethernet frames received across the
+// associated interface. Although it does not alter the frame in any way, the ONU routes the frame
+// as if it were tagged with P bits (PCP field) according to the following code points.
+//
+// 0 Derive implied PCP field from DSCP bits of received frame
+//
+// 1 Set implied PCP field to a fixed value specified by the default P-bit assumption attribute
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Untagged downstream frames are passed through the mapper transparently.
+//
+// Dscp To P Bit Mapping
+// NOTE - If certain bits in the DSCP field are to be ignored in the mapping process, the attribute
+// should be provisioned such that all possible values of those bits produce the same P-bit
+// mapping. This can be applied to the case where instead of full DSCP, the operator wishes to
+// adopt the priority mechanism based on IP precedence, which needs only the three MSBs of the DSCP
+// field.
+//
+// DSCP to P-bit mapping: This attribute is valid when the unmarked frame option attribute is set
+// to 0. The DSCP to P-bit attribute can be considered a bit string sequence of 64 3-bit groupings.
+// The 64 sequence entries represent the possible values of the 6-bit DSCP field. Each 3-bit
+// grouping specifies the P-bit value to which the associated DSCP value should be mapped. The
+// unmarked frame is then directed to the GEM IW TP indicated by the interwork TP pointer mappings.
+// (R,-W) (mandatory) (24-bytes)
+//
+// Default P Bit Assumption
+// Default P-bit assumption: This attribute is valid when the unmarked frame option attribute is
+// set to 1. In its LSBs, the default Pbit assumption attribute contains the default PCP field to
+// be assumed. The unmodified frame is then directed to the GEM IW TP indicated by the interwork TP
+// pointer mappings. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Tp Type
+// This attribute identifies the type of TP associated with the mapper.
+//
+// 0 Mapper used for bridging-mapping
+//
+// 1 Mapper directly associated with a PPTP Ethernet UNI
+//
+// 2 Mapper directly associated with an IP host config data or IPv6 host config data ME
+//
+// 3 Mapper directly associated with an Ethernet flow termination point
+//
+// 4 Mapper directly associated with a PPTP xDSL UNI
+//
+// 5 Reserved
+//
+// 6 Mapper directly associated with a PPTP MoCA UNI
+//
+// 7 Mapper directly associated with a virtual Ethernet interface point
+//
+// 8 Mapper directly associated with an IW VCC termination point
+//
+// 9 Mapper directly associated with an EFM bonding group
+//
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+type Ieee8021PMapperServiceProfile struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ ieee8021pmapperserviceprofileBME = &ManagedEntityDefinition{
+ Name: "Ieee8021PMapperServiceProfile",
+ ClassID: 130,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfff8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("TpPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("InterworkTpPointerForPBitPriority0", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint16Field("InterworkTpPointerForPBitPriority1", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("InterworkTpPointerForPBitPriority2", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint16Field("InterworkTpPointerForPBitPriority3", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint16Field("InterworkTpPointerForPBitPriority4", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: Uint16Field("InterworkTpPointerForPBitPriority5", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: Uint16Field("InterworkTpPointerForPBitPriority6", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: Uint16Field("InterworkTpPointerForPBitPriority7", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+ 10: ByteField("UnmarkedFrameOption", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+ 11: MultiByteField("DscpToPBitMapping", OctetsAttributeType, 0x0020, 24, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"), mapset.NewSetWith(Read, Write), false, false, false, 11),
+ 12: ByteField("DefaultPBitAssumption", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
+ 13: ByteField("TpType", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewIeee8021PMapperServiceProfile (class ID 130) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewIeee8021PMapperServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*ieee8021pmapperserviceprofileBME, params...)
+}