[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointmocauni.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointmocauni.go
new file mode 100644
index 0000000..cb35f78
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointmocauni.go
@@ -0,0 +1,180 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointMocaUniClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point MoCA UNI
+const PhysicalPathTerminationPointMocaUniClassID = ClassID(162) // 0x00a2
+
+var physicalpathterminationpointmocauniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointMocaUni (Class ID: #162 / 0x00a2)
+// This ME represents an MoCA UNI, where physical paths terminate and physical path level functions
+// are performed.
+//
+// The ONU automatically creates an instance of this ME per port as follows.
+//
+// o When the ONU has MoCA ports built into its factory configuration.
+//
+// o When a cardholder is provisioned to expect a circuit pack of the MoCA type.
+//
+// o When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the MoCA
+// type. Note that the installation of a plug-and-play card may indicate the presence of MoCA ports
+// via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-mapping
+// package that specifies MoCA ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect an MoCA circuit pack, nor is it equipped with an MoCA circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with each real or pre-provisioned MoCA port.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. This 2-byte number is directly
+// associated with the physical position of the UNI. The first byte is the slot ID (defined in
+// clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+// Loopback Configuration
+// 0 No loopback
+//
+// 3 Loopback3, loopback of downstream traffic after PHY transceiver, depicted in Figure 9.10.1-1.
+//
+// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (optional) (1-byte)
+//
+// This attribute sets the MoCA loopback configuration. Note that normal bridge behaviour may
+// defeat the loopback signal unless broadcast MAC addresses are used.
+//
+// Administrative State
+// This attribute locks (1) and unlocks (0) the functions performed by this ME. Administrative
+// state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+// Operational State
+// This attribute indicates whether the ME is capable of performing its function. Valid values are
+// enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Max Frame Size
+// This attribute denotes the maximum frame size allowed across this interface. Upon ME
+// instantiation, the ONU sets this attribute to 1518. (R,-W) (mandatory) (2-bytes)
+//
+// Arc
+// See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Pppoe Filter
+// This attribute controls filtering of PPPoE packets on this MoCA port. When its value is 1, all
+// packets other than PPPoE packets are discarded. The default 0 accepts packets of all types.
+// (R,-W) (optional) (1-byte)
+//
+// Network Status
+// This attribute indicates the networking state of the MoCA interface as follows.
+//
+// 0 The interface has not joined an MoCA network.
+//
+// 1 The interface has joined an MoCA network.
+//
+// 2 The interface has joined an MoCA network and is currently the network coordinator.
+//
+// (R) (mandatory) (1-byte)
+//
+// Password
+// This attribute specifies the MoCA encryption key. It is an ASCII string of 17 decimal digits.
+// Upon ME instantiation, the ONU sets this attribute to 17 null bytes. (R,-W) (mandatory)
+// (17-bytes)
+//
+// Privacy Enabled
+// This attribute activates (1) link-layer security. The default value 0 deactivates it. (R,-W)
+// (mandatory) (1-byte)
+//
+// Minimum Bandwidth Alarm Threshold
+// This attribute specifies the minimum desired PHY link bandwidth between two nodes. If the actual
+// bandwidth is lower, an LL alarm is declared. Valid values are 0 to 0x0410 (260-Mbit/s) in
+// 0.25-Mbit/s increments. The default value is 0x02D0 (180-Mbit/s). The value 0 disables the
+// threshold. (R,-W) (optional) (2-bytes)
+//
+// Frequency Mask
+// This attribute is a bit map of the centre frequencies that the interface is permitted to use,
+// where each bit represents a centre frequency. The LSB (b[1]) corresponds to centre frequency
+// 800-MHz. The next significant bit (b[2]) corresponds to centre frequency 825-MHz. The 28th bit
+// (b[28]) corresponds to centre frequency 1500-MHz. The four MSBs are not used. (R,-W) (optional)
+// (4-bytes)
+//
+// Rf Channel
+// This attribute reports the frequency to which the MoCA interface is currently tuned, in
+// megahertz. (R) (mandatory) (2-bytes)
+//
+// Last Operational Frequency
+// This attribute reports the frequency to which the MoCA interface was tuned when last
+// operational, in megahertz. (R) (mandatory) (2-bytes)
+//
+type PhysicalPathTerminationPointMocaUni struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointmocauniBME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointMocaUni",
+ ClassID: 162,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfffc,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("LoopbackConfiguration", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, true, false, 1),
+ 2: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+ 3: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), true, true, false, 3),
+ 4: Uint16Field("MaxFrameSize", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: ByteField("Arc", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), true, true, false, 5),
+ 6: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
+ 7: ByteField("PppoeFilter", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
+ 8: ByteField("NetworkStatus", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
+ 9: MultiByteField("Password", OctetsAttributeType, 0x0080, 17, toOctets("AAAAAAAAAAAAAAAAAAAAAAA="), mapset.NewSetWith(Read, Write), false, false, false, 9),
+ 10: ByteField("PrivacyEnabled", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10),
+ 11: Uint16Field("MinimumBandwidthAlarmThreshold", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+ 12: Uint32Field("FrequencyMask", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+ 13: Uint16Field("RfChannel", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
+ 14: Uint16Field("LastOperationalFrequency", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "MoCA LOL",
+ 1: "MoCA limited link (LL)",
+ },
+ }
+}
+
+// NewPhysicalPathTerminationPointMocaUni (class ID 162) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointMocaUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*physicalpathterminationpointmocauniBME, params...)
+}