[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointxdslunipart3.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointxdslunipart3.go
new file mode 100644
index 0000000..454a126
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointxdslunipart3.go
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointXdslUniPart3ClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point xDSL UNI part 3
+const PhysicalPathTerminationPointXdslUniPart3ClassID = ClassID(427) // 0x01ab
+
+var physicalpathterminationpointxdslunipart3BME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointXdslUniPart3 (Class ID: #427 / 0x01ab)
+// This ME represents the point in the ONU where physical paths terminate on an xDSL CO modem
+// (xTU-C). Standards and chip sets support several forms of DSL, including VDSL2 and FAST, and the
+// xDSL ME family is used for all of them, with specific extensions for technology variations.
+//
+// The ONU creates or deletes an instance of this ME at the same time it creates or deletes the
+// corresponding PPTP xDSL UNI part 1.
+//
+// Relationships
+// An instance of this ME is associated with each instance of a real or preprovisioned xDSL port
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. This 2 byte number indicates the
+// physical position of the UNI. The six LSBs of the first byte are the slot ID, defined in clause
+// 9.1.5. The two MSBs indicate the channel number in some of the implicitly linked MEs, and must
+// be 0 in the PPTP itself. This reduces the possible number of physical slots to 64. The second
+// byte is the port ID, with range 1..255. (R) (mandatory) (2 bytes)
+//
+// Fast Line Configuration Profile
+// This attribute points to an instance of the FAST line configuration profiles (part 1, 2, 3 and
+// 4) MEs, also to FAST vectoring line configuration extension MEs. Upon ME instantiation, the ONU
+// sets this attribute to 0, a null pointer. (R, W) (mandatory) (2 bytes)
+//
+// Fast Data Path Configuration Profile
+// This attribute points to an instance of the FAST data configuration profile that defines data
+// path parameters. Upon ME instantiation, the ONU sets this attribute to 0, a null pointer. (R, W)
+// (optional) (2 bytes)
+//
+// Fast Channel Configuration Profile For Bearer Channel 0 Downstream
+// This attribute points to an instance of the FAST channel configuration profile that defines
+// channel parameters. Upon ME instantiation, the ONU sets this attribute to 0, a null pointer.
+// (R,-W) (optional) (2-bytes) (R,-W) (optional) (2-bytes)
+//
+// Fast Xdsl Channel Configuration Profile For Bearer Channel 0 Upstream
+// This attribute points to an instance of the FAST channel configuration profile that defines
+// channel parameters. Upon ME instantiation, the ONU sets this attribute to 0, a null pointer
+// (R,-W) (optional) (2-bytes)
+//
+type PhysicalPathTerminationPointXdslUniPart3 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointxdslunipart3BME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointXdslUniPart3",
+ ClassID: 427,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xf000,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: Uint16Field("FastLineConfigurationProfile", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: Uint16Field("FastDataPathConfigurationProfile", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, true, false, 2),
+ 3: Uint16Field("FastChannelConfigurationProfileForBearerChannel0Downstream", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, true, false, 3),
+ 4: Uint16Field("FastXdslChannelConfigurationProfileForBearerChannel0Upstream", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewPhysicalPathTerminationPointXdslUniPart3 (class ID 427) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointXdslUniPart3(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*physicalpathterminationpointxdslunipart3BME, params...)
+}