[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/pseudowireterminationpoint.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/pseudowireterminationpoint.go
new file mode 100644
index 0000000..31e0654
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/pseudowireterminationpoint.go
@@ -0,0 +1,226 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PseudowireTerminationPointClassID is the 16-bit ID for the OMCI
+// Managed entity Pseudowire termination point
+const PseudowireTerminationPointClassID = ClassID(282) // 0x011a
+
+var pseudowireterminationpointBME *ManagedEntityDefinition
+
+// PseudowireTerminationPoint (Class ID: #282 / 0x011a)
+// The pseudowire TP supports packetized (rather than TDM) transport of TDM services, transported
+// either directly over Ethernet, over UDP/IP or over MPLS. Instances of this ME are created and
+// deleted by the OLT.
+//
+// Relationships
+// One pseudowire TP ME exists for each distinct TDM service that is mapped to a pseudowire.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+// (2-bytes)
+//
+// Underlying Transport
+// 2 MPLS
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Underlying transport:
+//
+// 0 Ethernet, MEF 8
+//
+// 1 UDP/IP
+//
+// Service Type
+// This attribute specifies the basic service type, either a transparent bit pipe or an
+// encapsulation that recognizes the underlying structure of the payload.
+//
+// 0 Basic unstructured (also known as structure agnostic)
+//
+// 1 Octet-aligned unstructured, structure agnostic. Applicable only to DS1, a mode in which each
+// frame of 193 bits is encapsulated in 25 bytes with 7 padding bits.
+//
+// 2 Structured (structure-locked)
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Signalling
+// 1 CAS, to be carried in the same packet stream as the payload
+//
+// 2 CAS, to be carried in a separate signalling channel
+//
+// (R,-W, setbycreate) (mandatory for structured service type) (1-byte)
+//
+// 0 No signalling visible at this layer
+//
+// Tdm Uni Pointer
+// If service type-= structured, this attribute points to a logical N-* 64-kbit/s subport CTP.
+// Otherwise, this attribute points to a PPTP CES UNI. (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// North_Side Pointer
+// North-side pointer: When the pseudowire service is transported via IP, as indicated by the
+// underlying transport attribute, the northside pointer attribute points to an instance of the
+// TCP/UDP config data ME. When the pseudowire service is transported directly over Ethernet, the
+// north-side pointer attribute is not used - the linkage to the Ethernet flow TP is implicit in
+// the ME IDs. When the pseudowire service is transported over MPLS, the northside pointer
+// attribute points to an instance of the MPLS PW TP. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Far_End Ip Info
+// A null pointer is appropriate if the pseudowire is not transported via IP. (R,-W, setbycreate)
+// (mandatory for IP transport) (2-bytes)
+//
+// Far-end IP info: When the pseudowire service is transported via IP, this attribute points to a
+// large string ME that contains the URI of the far-end TP, e.g.,
+//
+// udp://192.168.100.221:5000
+//
+// udp://pwe3srvr.int.example.net:2222
+//
+// Payload Size
+// Number of payload bytes per packet. Valid only if service type-= basic unstructured or octet-
+// aligned unstructured. Valid choices depend on the TDM service, but must include the following.
+// Other choices are at the vendor's discretion.
+//
+// DS1 192
+//
+// DS1 200, required only if an octet-aligned unstructured service is supported
+//
+// E1 256
+//
+// DS3 1024
+//
+// E3 1024
+//
+// (R,-W, setbycreate) (mandatory for unstructured service) (2-bytes)
+//
+// Payload Encapsulation Delay
+// Number of 125-us frames to be encapsulated in each pseudowire packet. Valid only if service
+// type-= structured. The minimum set of choices for various TDM services is listed in the
+// following table, and is affected by the possible presence of in-band signalling. Other choices
+// are at the vendor's discretion.
+//
+// (R,-W, setbycreate) (mandatory for structured service) (1-byte)
+//
+// Timing Mode
+// (R,-W) (mandatory) (1-byte)
+//
+// This attribute selects the timing mode of the TDM service. If RTP is used, this attribute must
+// be set to be consistent with the value of the RTP timestamp mode attribute in the RTP pseudowire
+// parameters ME, or its equivalent, at the far end.
+//
+// 0 Network timing (default)
+//
+// 1 Differential timing
+//
+// 2 Adaptive timing
+//
+// 3 Loop timing: local TDM transmit clock derived from local TDM receive stream
+//
+// Transmit Circuit Id
+// This attribute is a pair of emulated circuit ID (ECID) values that the ONU transmits in the
+// direction from the TDM termination towards the packet-switched network (PSN). MEF 8 ECIDs lie in
+// the range 1..1048575 (220-- 1). To allow for the possibility of other transport (L2TP) in the
+// future, each ECID is allocated 4-bytes.
+//
+// The first value is used for the payload ECID; the second is used for the optional separate
+// signalling ECID. The first ECID is required for all MEF 8 pseudowires; the second is required
+// only if signalling is to be carried in a distinct channel. If signalling is not present, or is
+// carried in the same channel as the payload, the second ECID should be set to 0.
+//
+// (R,-W) (mandatory for MEF 8 transport) (8-bytes)
+//
+// Expected Circuit Id
+// This attribute is a pair of ECID values that the ONU can expect in the direction from the PSN
+// towards the TDM termination. Checking ECIDs may be a way to detect circuit misconnection. MEF 8
+// ECIDs lie in the range 1..1048575 (220-- 1). To allow for the possibility of other transport
+// (L2TP) in the future, each ECID is allocated 4-bytes.
+//
+// The first value is used for the payload ECID; the second is used for the optional separate
+// signalling ECID. In both cases, the default value 0 indicates that no ECID checking is expected.
+//
+// (R,-W) (optional for MEF 8 transport) (8-bytes)
+//
+// Received Circuit Id
+// This attribute indicates the actual ECID(s) received on the payload and signalling channels,
+// respectively. It may be used for diagnostic purposes. (R) (optional for MEF 8 transport)
+// (8-bytes)
+//
+// Exception Policy
+// This attribute points to an instance of the pseudowire maintenance profile ME. If the pointer
+// has its default value 0, the ONU's internal defaults apply. (R,-W) (optional) (2-bytes)
+//
+// Arc
+// See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+type PseudowireTerminationPoint struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ pseudowireterminationpointBME = &ManagedEntityDefinition{
+ Name: "PseudowireTerminationPoint",
+ ClassID: 282,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfffe,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("UnderlyingTransport", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("ServiceType", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: ByteField("Signalling", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("TdmUniPointer", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint16Field("NorthSidePointer", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint16Field("FarEndIpInfo", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: Uint16Field("PayloadSize", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: ByteField("PayloadEncapsulationDelay", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: ByteField("TimingMode", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9),
+ 10: Uint64Field("TransmitCircuitId", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10),
+ 11: Uint64Field("ExpectedCircuitId", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
+ 12: Uint64Field("ReceivedCircuitId", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
+ 13: Uint16Field("ExceptionPolicy", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+ 14: ByteField("Arc", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), true, true, false, 14),
+ 15: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewPseudowireTerminationPoint (class ID 282) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPseudowireTerminationPoint(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*pseudowireterminationpointBME, params...)
+}