[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/trafficscheduler.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/trafficscheduler.go
new file mode 100644
index 0000000..6be642f
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/trafficscheduler.go
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// TrafficSchedulerClassID is the 16-bit ID for the OMCI
+// Managed entity Traffic scheduler
+const TrafficSchedulerClassID = ClassID(278) // 0x0116
+
+var trafficschedulerBME *ManagedEntityDefinition
+
+// TrafficScheduler (Class ID: #278 / 0x0116)
+// NOTE 1 - In [ITU-T G.984.4], this ME is called a traffic scheduler-G.
+//
+// An instance of this ME represents a logical object that can control upstream GEM packets. A
+// traffic scheduler can accommodate GEM packets after a priority queue or other traffic scheduler
+// and transfer them towards the next traffic scheduler or T-CONT. Because T-CONTs and traffic
+// schedulers are created autonomously by the ONU, the ONU vendor predetermines the most complex
+// traffic handling model it is prepared to support; the OLT may use less than the ONU's full
+// capabilities, but cannot ask for more. See Appendix II for more details.
+//
+// After the ONU creates instances of the T-CONT ME, it then autonomously creates instances of the
+// traffic scheduler ME.
+//
+// Relationships
+// The traffic scheduler ME may be related to a T-CONT or other traffic schedulers through pointer
+// attributes.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. This 2-byte number indicates the
+// physical capability that realizes the traffic scheduler. The first byte is the slot ID of the
+// circuit pack with which this traffic scheduler is associated. For a traffic scheduler that is
+// not associated with a circuit pack, the first byte is 0xFF. The second byte is the traffic
+// scheduler id, assigned by the ONU itself. Traffic schedulers are numbered in ascending order
+// with the range 0..0xFF in each circuit pack or in the ONU core. (R) (mandatory) (2-bytes)
+//
+// T_Cont Pointer
+// T-CONT pointer: This attribute points to the T-CONT ME instance associated with this traffic
+// scheduler. This pointer is used when this traffic scheduler is connected to the T-CONT directly;
+// It is null (0) otherwise. (R, W) (mandatory) (2 bytes)
+//
+// NOTE 2 - This attribute is read-only unless otherwise specified by the QoS configuration
+// flexibility attribute of the ONU2-G ME. If flexible configuration is not supported, the ONU
+// should reject an attempt to set the TCONT pointer attribute with a parameter error result-reason
+// code.
+//
+// Traffic Scheduler Pointer
+// This attribute points to another traffic scheduler ME instance that may serve this traffic
+// scheduler. This pointer is used when this traffic scheduler is connected to another traffic
+// scheduler; it is null (0) otherwise. (R) (mandatory) (2-bytes)
+//
+// Policy
+// This attribute represents scheduling policy. Valid values include:
+//
+// 0 Null
+//
+// 1 Strict priority
+//
+// 2 WRR (weighted round robin)
+//
+// The traffic scheduler derives priority or weight values for its tributary traffic schedulers or
+// priority queues from the tributary MEs themselves.
+//
+// (R, W) (mandatory) (1 byte)
+//
+// NOTE 3 - This attribute is read-only unless otherwise specified by the QoS configuration
+// flexibility attribute of the ONU2-G ME. If flexible configuration is not supported, the ONU
+// should reject an attempt to set the policy attribute with a parameter error result-reason code.
+//
+// Priority_Weight
+// Priority/weight: This attribute represents the priority for strict priority scheduling or the
+// weight for WRR scheduling. This value is used by the next upstream ME, as indicated by the
+// T-CONT pointer attribute or traffic scheduler pointer attribute.
+//
+// If the indicated pointer has policy-=-strict priority, this value is interpreted as a priority
+// (0 is the highest priority, 255 the lowest).
+//
+// If the indicated pointer has policy-=-WRR, this value is interpreted as a weight. Higher values
+// receive more bandwidth.
+//
+// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+type TrafficScheduler struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ trafficschedulerBME = &ManagedEntityDefinition{
+ Name: "TrafficScheduler",
+ ClassID: 278,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xf000,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: Uint16Field("TContPointer", PointerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: Uint16Field("TrafficSchedulerPointer", PointerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: ByteField("Policy", EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: ByteField("PriorityWeight", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewTrafficScheduler (class ID 278) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewTrafficScheduler(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*trafficschedulerBME, params...)
+}