[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/vdsl2lineconfigurationextensions.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/vdsl2lineconfigurationextensions.go
new file mode 100644
index 0000000..ebac5a1
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/vdsl2lineconfigurationextensions.go
@@ -0,0 +1,375 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Vdsl2LineConfigurationExtensionsClassID is the 16-bit ID for the OMCI
+// Managed entity VDSL2 line configuration extensions
+const Vdsl2LineConfigurationExtensionsClassID = ClassID(165) // 0x00a5
+
+var vdsl2lineconfigurationextensionsBME *ManagedEntityDefinition
+
+// Vdsl2LineConfigurationExtensions (Class ID: #165 / 0x00a5)
+// This ME extends the xDSL line configuration MEs with attributes that were originally unique to
+// ITU-T G.993.2 VDSL2. Due to continuing standards development, some attributes - and therefore
+// this ME - have also become applicable to other Recommendations, specifically [ITU-T G.992.3] and
+// [ITU-T G.992.5]. The attributes of this ME are further defined in [ITUT G.997.1]. An instance of
+// this ME is created and deleted by the OLT.
+//
+// Relationships
+// An instance of this ME may be associated with zero or more instances of an xDSL UNI.//// The overall xDSL line configuration profile is modelled in several parts, all of which are
+// associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
+// pointer, which refers to the entire set of line configuration parts).
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. All xDSL and VDSL2 line
+// configuration profiles and extensions that pertain to a given PPTP xDSL UNI must share a common
+// ME ID. (R, setbycreate) (mandatory) (2-bytes)
+//
+// Vdsl2 Profiles Enabling
+// The PROFILES attribute contains the ITU-T G.993.2 profiles to be allowed by the xTU-C. It is
+// coded in a bit map representation (0 if not allowed, 1 if allowed) with the following
+// definition.
+//
+// Bit Meaning
+//
+// 1 (LSB) ITU-T G.993.2 profile 8a
+//
+// 2 ITU-T G.993.2 profile 8b
+//
+// 3 ITU-T G.993.2 profile 8c
+//
+// 4 ITU-T G.993.2 profile 8d
+//
+// 5 ITU-T G.993.2 profile 12a
+//
+// 6 ITU-T G.993.2 profile 12b
+//
+// 7 ITU-T G.993.2 profile 17a
+//
+// 8 ITU-T G.993.2 profile 30a
+//
+// (R,-W, setbycreate) (mandatory for ITU-T G.993.2) (1-byte)
+//
+// Vdsl2 Psd Mask Class Selection Classmask
+// NOTE 1 - A single PSD mask class may be selected per annex of [ITU-T G.993.2].
+//
+// NOTE 2 - It is expected that only a single annex will be enabled at any given time, such that
+// the CLASSMASK attribute, as well as the LIMITMASK and US0DISABLE attributes below, need not be
+// vectors of values.
+//
+// NOTE 3 - Attribute value 4 was formerly defined in [ITU-T G.997.1], and is no longer used.
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// VDSL2 PSD mask class selection (CLASSMASK): To reduce the number of configuration possibilities,
+// the limit PSD masks are grouped in the following PSD mask classes.
+//
+// - Class 998 Annex A of [ITU-T G.993.2]: D-32, D-48, D-64, D-128
+//
+// - Class 997-M1c Annex B of [ITU-T G.993.2]: 997M1c-A-7
+//
+// - Class 997-M1x Annex B of [ITU-T G.993.2]: 997M1x-M
+//
+// - Class 997-M2x Annex B of [ITU-T G.993.2]: 997E17-M2x-NUS0, 997E30M2xNUS0
+//
+// - Class 998-M2x Annex B of [ITU-T G.993.2]: 998M2x-A, 998M2xM, 998M2x-B, 998-M2x-NUS0,
+// 998E17-M2xNUS0, 998E17M2xNUS0-M, 998E30M2xNUS0, 998E30M2xNUS0M, 998E17-M2x-A
+//
+// - Class 998ADE-M2x Annex B of [ITU-T G.993.2]: 998-M2x-A, 998M2x-M, 998-M2x-B, 998-M2x-NUS0,
+// 998ADE17-M2x-A, 998ADE17M2xB, 998ADE17-M2x-M, 998ADE17M2xNUS0-M, 998ADE30M2xNUS0-A,
+// 998ADE30M2x-NUS0-M, HPEADE1230, HPEADE1730
+//
+// - Class 998-B Annex C: POTS-138b, POTS-276b (clause C.2.1.1 of [ITUT-G.993.2]), TCMISDN (clause
+// C.2.1.2 of [ITU-T G.993.2])
+//
+// - Class 998-CO Annex C of [ITU-T G.993.2]: POTS138co, POTS276co (clause C.2.1.1 of [ITU-T
+// G.993.2])
+//
+// - Class HPE-M1 Annex B of [ITU-T G.993.2]: HPE17M1-NUS0, HPE30M1NUS0, HPE1230-M1-NUS0,
+// HPE1730-M1-NUS0
+//
+// Each class is designed such that the PSD levels of each limit PSD mask of a specific class are
+// equal in their respective passbands above 552 kHz.
+//
+// The CLASSMASK attribute is defined per annex of [ITU-T G.993.2] enabled in the xTSE table (see
+// Table 9.7.12-1). It selects a single PSD mask class per annex of [ITU-T G.993.2] to be activated
+// at the very high-speed digital subscriber line transceiver unit, operator end (VTU-O). The
+// coding is as follows:
+//
+// Vdsl2 Limit Psd Masks
+// The LIMITMASK attribute contains the ITU-T G.993.2 limit PSD masks of the selected PSD mask
+// class, enabled by the near-end xTU for each class of profiles. One LIMITMASK parameter is
+// defined per annex enabled in the xTSE (see Table 9.7.12-1).
+//
+// The profiles are grouped in the following profile classes:
+//
+// - Class 8: Profiles 8a, 8b, 8c, 8d
+//
+// - Class 12: Profiles 12a, 12b
+//
+// - Class 17: Profile 17a
+//
+// - Class 30: Profile 30a
+//
+// For each profile class, several limit PSD masks of the selected PSD mask class (CLASSMASK) may
+// be enabled. The enabling attribute is coded in a bit map representation (0 if the associated
+// mask is not allowed, 1 if it is allowed). The bit mask is defined in Table 9.7.6-1. (R,-W,
+// setbycreate) (mandatory) (8-bytes)
+//
+// Vdsl2 Us0 Disabling
+// The US0DISABLE attribute specifies whether channel US0 is disabled for each limit PSD mask
+// enabled in the LIMITMASK attribute.
+//
+// For each limit PSD mask enabled in the LIMITMASK attribute, one bit indicates if US0 is
+// disabled. The disabling attribute is a bit map where the value 1 specifies that US0 is disabled
+// for the associated limit mask. The bit map has the same structure as the LIMITMASK attribute.
+// (R,-W, setbycreate) (mandatory) (8-bytes)
+//
+// Vdsl2 Us0 Psd Masks
+// The US0MASK attribute contains the US0 PSD masks to be allowed by the xTU-C. This attribute is
+// only defined for Annex-A of [ITUT-G.993.2]. It is represented as a bit map (0 if not allowed, 1
+// if allowed) with the definitions of Table-9.7.6-2. (R, W, setbycreate) (mandatory) (4-bytes)
+//
+// Vdsl2_Carmask Table
+// VDSL2-CARMASK table: This attribute specifies restrictions, additional to the band plan, that
+// determine the set of subcarriers allowed for transmission in both upstream and downstream
+// directions.
+//
+// The VDSL2-CARMASK attribute describes the not-masked subcarriers in terms of one or more
+// frequency bands. Each band is represented by start and stop subcarrier indices with a subcarrier
+// spacing of 4.3125-kHz. The valid range of subcarrier indices is from 0 to at least the index of
+// the highest allowed subcarrier in both transmission directions among all profiles enabled by the
+// VDSL2 profiles enabling (PROFILES) attribute. Up to 32 bands may be specified. Other subcarriers
+// are masked.
+//
+// For profiles using 8.625 kHz tone spacing, the odd subcarrier indices i4.3125 in VDSL2-CARMASK
+// can be transformed into actual subcarrier indices i8.625 using the following rule:
+//
+// - for the start frequency of each band: i8.625-=-(i4.3125 + 1)/2
+//
+// - for the stop frequency of each band: i8.625-=-(i4.3125 - 1)/2.
+//
+// The VDSL2-CARMASK attribute is a table where each entry comprises:
+//
+// - an entry number field (1-byte, first entry numbered 1);
+//
+// - band start subcarrier index (2-bytes);
+//
+// - band stop subcarrier index (2-bytes).
+//
+// By default, the table is empty. Entries are added or modified using the set action. Setting a
+// table entry with non-zero subcarrier references implies insertion into the table. Setting an
+// entry's subcarrier references to zero implies deletion from the table, if present.
+//
+// The maximum number of bands is 32, so the maximum size of the table is 160-bytes. (R,-W)
+// (mandatory) (5 * N bytes, where N is the number of bands)
+//
+// Carmask Valid
+// This attribute controls and reports the status of the VDSL2-CARMASK table. If CARMASK valid-= 1,
+// then the VDSL2-CARMASK has been effectuated on the xDSL equipment. If CARMASK valid-= 0
+// (default), then the VDSL2-CARMASK table is under construction and has not been effectuated on
+// the xDSL equipment.
+//
+// This attribute behaves as follows.
+//
+// If the OLT changes any of the VDSL2-CARMASK table entries or sets CARMASK valid-= 0, then
+// CARMASK valid-= 0.
+//
+// If CARMASK valid-= 0 and the OLT sets CARMASK valid-= 1, then the ONU updates the xDSL equipment
+// with the contents of the table.
+//
+// (R,-W) (mandatory) (1-byte)
+//
+// Upboshaped
+// This attribute includes two parameters for each band. The parameters are a and b, in that order.
+// Parameter a lies in the range 4000 (40.00-dBm/Hz) to 8095 (80.95-dBm/Hz). Parameter b lies in
+// the range 0 (0.00-dBm/Hz) to 4095 (40.95-dBm/Hz). The special values a-= b-= 0 disable UPBO in
+// the respective upstream band.
+//
+// The upstream electrical length parameter UPBOKL defines the electrical length expressed in
+// decibels at 1-MHz, kl0, which may also be configured by the OLT. Its value ranges from 0
+// (0.0-dB) to 1280 (128.0-dB).
+//
+// If the force electrical length parameter UPBOKLF is 1, the very high-speed digital subscriber
+// line transceiver unit, remote end (VTU-R) is forced to use the electrical length from this
+// attribute (UPBOKL) to compute UPBO. Otherwise, the VDSL2 transceiver units (VTUs) determine the
+// electrical length themselves.
+//
+// (R,-W) (mandatory) (23-bytes)
+//
+// Upstream power back-off (UPBO) is specified in [ITUT G.993.2] to provide spectral compatibility
+// between loops of different lengths deployed in the same cable binder. The upstream transmit PSD
+// mask, UPBOMASKus is defined in clause 7.2.1.3.2 of [ITUT G.993.2].
+//
+// The ITU-T G.993.2 UPBO configuration attributes a and b are set by the OLT via this attribute.
+// The reference length kl0_REF is set by the companion attribute UPBO klREF-pb, defined in the
+// following. Further details appear in [ITUT-G.997.1].
+//
+// Cyclic Extension
+// The CEFLAG attribute enables (1) the optional cyclic extension values. If set to 0, the cyclic
+// extension is forced to the mandatory length 5N/32. (R,-W) (mandatory) (1-byte)
+//
+// Downstream Signal_To_Noise Ratio Snr Mode
+// Downstream signal-to-noise ratio (SNR) mode: The SNRMODEds attribute controls transmitter
+// referred virtual noise in the downstream direction. If set to 1, virtual noise is disabled. If
+// set to 2, virtual noise is enabled. (R,-W) (mandatory) (1-byte)
+//
+// Upstream Snr Mode
+// The SNRMODEus attribute controls transmitter referred virtual noise in the upstream direction.
+// If set to 1, virtual noise is disabled. If set to 2, virtual noise is enabled. (R,-W)
+// (mandatory) (1-byte)
+//
+// Transmitter Referred Virtual Noise Downstream Table
+// Table entries for this attribute have the default value 254 for the noise PSD level. Entries are
+// added or modified using the set action. Setting an entry to a noise PSD level less than or equal
+// to 254 implies insertion into the table. Setting an entry's noise PSD level to 255 implies
+// deletion from the table, if present.
+//
+// (R,-W) (optional) (3N bytes, where N is the number of breakpoints)
+//
+// The TXREFVNds table defines the downstream transmitter referred virtual noise. TXREFVNds is
+// specified through a set of breakpoints. Each breakpoint comprises a subcarrier index t, with a
+// subcarrier spacing of 4.3125-kHz, and a noise PSD level at that subcarrier. The set of
+// breakpoints can then be represented as [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)]. The subcarrier
+// index t is an unsigned 2 byte integer. The noise level is 1-byte whose value ranges from 0
+// (-40-dBm/Hz) to 200 (-140-dBm/Hz), in steps of 0.5 dB. Values between 201 and 254 indicate a
+// noise PSD level of 0 W/Hz. The maximum number of breakpoints is 32; no more than 15 breakpoints
+// may be configured below the upper edge of the passband of every mode enabled for [ITU-T G.992.3]
+// and [ITUT-G.992.5].
+//
+// Transmitter Referred Virtual Noise Upstream Table
+// The TXREFVNus attribute defines the upstream transmitter referred virtual noise. TXREFVNus is
+// specified through a set of breakpoints. Each breakpoint comprises a subcarrier index t, with a
+// subcarrier spacing of 4.3125-kHz, and a noise PSD level at that subcarrier. The set of
+// breakpoints can then be represented as [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)]. The subcarrier
+// index t is an unsigned 2-byte integer. The noise level is 1-byte whose value ranges from 0
+// (-40-dBm/Hz) to 200 (-140-dBm/Hz), in steps of 0.5 dB. Values between 201 and 254 indicate a
+// noise PSD level of 0-W/Hz. The maximum number of breakpoints is 16; no more than three
+// breakpoints may be configured below the upper edge of the passband of every mode enabled for
+// [ITU-T G.992.3] and [ITUT-G.992.5].
+//
+// Table entries for this attribute have the default value 254 for the noise PSD level. Entries are
+// added or modified using the set action. Setting an entry to a noise PSD level less than or equal
+// to 254 implies insertion into the table. Setting an entry's noise PSD level to 255 implies
+// deletion from the table, if present.
+//
+// (R,-W) (optional) (3N bytes, where N is the number of breakpoints)
+//
+// Dpboshaped
+// Downstream power back-off - shaped is described in [ITUT G.997.1] as a vector of parameters that
+// modifies the downstream PSD mask.
+//
+// DPBOEPSD - Assumed exchange PSD mask. This component points to a downstream xDSL PSD mask
+// profile ME. The PSD mask profile should contain no more than 16 break points. (2-bytes)
+//
+// DPBOESEL - E-side electrical length. This component is the assumed loss at some reference
+// frequency of the electrical cable from the xDSL equipment to a possible flexibility point. It
+// ranges from 0 (0.0-dB) to 511 (255.5-dB) in steps of 0.5-dB. The value 0 has the special meaning
+// that it disables the DPBOSHAPED feature. (2-bytes)
+//
+// The following three parameters describe the cable model. Further details appear in [ITUT
+// G.997.1]. Each is a scalar that represents the range -1 (coded as 0) to +1.5 (coded as 640) in
+// steps of 1/256.
+//
+// DPBOESCMA - (2-bytes)
+//
+// DPBOESCMB - (2-bytes)
+//
+// DPBOESCMC - (2-bytes)
+//
+// DPBOMUS - Assumed minimum usable receive PSD mask. This component ranges from 0 (0.0-dBm/Hz) to
+// 255 (-127.5-dBm/Hz) in steps of 0.5 dB. (1-byte)
+//
+// DPBOFMIN - The lower frequency bound above which DPBO is applied. This component ranges from 0
+// (0.00 kHz) to 2048 (8832.00 kHz) in steps of 4.3125 kHz. (2-bytes)
+//
+// DPBOFMAX - The upper frequency bound below which DPBO is applied. This component ranges from 32
+// (138.00-kHz) to 6956 (29997.75-kHz) in steps of 4.3125-kHz. (2-bytes)
+//
+// (R,-W) (optional) (15-bytes)
+//
+// Upboklref_Pb
+// UPBOKLREF-pb: This attribute represents the reference loop length, the electrical length used to
+// compute upstream power back-off (UPBO) for each upstream band except US0, for the optional
+// equalized FEXT UPBO method. The value for each upstream band ranges from 1.8 to 63.5 dB in steps
+// of 0.1 dB, i.e., with values 18..635. The special value 0 is also allowed, with semantics as
+// defined in clause 7.2.1.3.2 of [ITUT G.993.2]. (R,-W) (optional) (2-bytes * 5 upstream bands)
+//
+// Upboshaped Aele_Mode, Upboelmt
+// UPBOSHAPED (AELE-MODE, UPBOELMT): This attribute defines the UPBO electrical length estimation
+// mode (AELE-MODE) and UPBO electrical length minimum threshold percentile (UPBOELMT) to be used
+// in the alternative electrical length estimation method (ELE-M1). The format of this attribute is
+// given in octet 1 of Table 12-27 of [ITU-T G.993.2]. (R,-W) (optional) (1-byte)
+//
+type Vdsl2LineConfigurationExtensions struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ vdsl2lineconfigurationextensionsBME = &ManagedEntityDefinition{
+ Name: "Vdsl2LineConfigurationExtensions",
+ ClassID: 165,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ GetNext,
+ Set,
+ SetTable,
+ ),
+ AllowedAttributeMask: 0xffff,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("Vdsl2ProfilesEnabling", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("Vdsl2PsdMaskClassSelectionClassmask", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint64Field("Vdsl2LimitPsdMasks", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint64Field("Vdsl2Us0Disabling", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint32Field("Vdsl2Us0PsdMasks", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: TableField("Vdsl2CarmaskTable", TableAttributeType, 0x0400, TableInfo{nil, 5}, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: ByteField("CarmaskValid", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+ 8: MultiByteField("Upboshaped", OctetsAttributeType, 0x0100, 23, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA="), mapset.NewSetWith(Read, Write), false, false, false, 8),
+ 9: ByteField("CyclicExtension", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9),
+ 10: ByteField("DownstreamSignalToNoiseRatioSnrMode", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10),
+ 11: ByteField("UpstreamSnrMode", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
+ 12: TableField("TransmitterReferredVirtualNoiseDownstreamTable", TableAttributeType, 0x0010, TableInfo{nil, 3}, mapset.NewSetWith(Read, Write), false, true, false, 12),
+ 13: TableField("TransmitterReferredVirtualNoiseUpstreamTable", TableAttributeType, 0x0008, TableInfo{nil, 3}, mapset.NewSetWith(Read, Write), false, true, false, 13),
+ 14: MultiByteField("Dpboshaped", OctetsAttributeType, 0x0004, 15, toOctets("AAAAAAAAAAAAAAAAAAAA"), mapset.NewSetWith(Read, Write), false, true, false, 14),
+ 15: Uint16Field("UpboklrefPb", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
+ 16: ByteField("UpboshapedAeleMode,Upboelmt", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewVdsl2LineConfigurationExtensions (class ID 165) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVdsl2LineConfigurationExtensions(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*vdsl2lineconfigurationextensionsBME, params...)
+}