diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/vdsl2lineinventoryandstatusdatapart2.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/vdsl2lineinventoryandstatusdatapart2.go
new file mode 100644
index 0000000..e4cba76
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/vdsl2lineinventoryandstatusdatapart2.go
@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Vdsl2LineInventoryAndStatusDataPart2ClassID is the 16-bit ID for the OMCI
+// Managed entity VDSL2 line inventory and status data part 2
+const Vdsl2LineInventoryAndStatusDataPart2ClassID = ClassID(169) // 0x00a9
+
+var vdsl2lineinventoryandstatusdatapart2BME *ManagedEntityDefinition
+
+// Vdsl2LineInventoryAndStatusDataPart2 (Class ID: #169 / 0x00a9)
+//	This ME extends the xDSL line configuration MEs. The ME name was chosen because its attributes
+//	were initially unique to ITU-T G.993.2 VDSL2. Due to continuing standards development, some
+//	attributes - and therefore this ME - have also become applicable to other Recommendations,
+//	specifically [ITU-T G.992.3] and [ITU-T G.992.5].
+//
+//	This ME contains upstream attributes.
+//
+//	Relationships
+//		This is one of the status data MEs associated with an xDSL UNI. It is meaningful if the PPTP
+//		supports [ITU-T G.992.3], [ITU-T G.992.5] or [ITU-T G.993.2]. The ONU automatically creates or
+//		deletes an instance of this ME upon creation and deletion of a PPTP xDSL UNI part 1 that
+//		supports these attributes.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R) (mandatory) (2-bytes)
+//
+//		Vdsl2 Transmission System Capability Xtu_R
+//			VDSL2 transmission system capability xTU-R: This attribute extends the xTU-R transmission system
+//			capability attribute of the xDSL line inventory and status data part 1 to include xTUR VDSL2
+//			capabilities. It is a defined by bits 57..64 of Table 9.7.12-1. (R) (mandatory) (1-byte)
+//
+//		Actsnrmodeus
+//			1	Virtual noise inactive
+//
+//			2	Virtual noise active
+//
+//			(R) (mandatory) (1-byte)
+//
+//			This attribute indicates whether transmitter-referred virtual noise is active on the line in the
+//			upstream direction.
+//
+//		Upbokle
+//			This attribute contains the electrical length estimated by the VTU-O expressed in decibels at
+//			1-MHz, kl0 (see O-UPDATE in clause 12.3.3.2.1.2 of [ITUT-G.993.2]). This is the final electrical
+//			length that would have been sent from the VTU-O to the VTU-R if the electrical length were not
+//			forced by the OLT. The value lies in the range 0 (0.0-dB) to 1280 (128.0-dB) (R) (mandatory)
+//			(2-bytes)
+//
+//			The following four attributes have similar definitions. In each case, valid attribute values are
+//			1, 2, 4, 8. In ADSL applications, the corresponding value is fixed at 1, and therefore need not
+//			be specified. For VDSL2, it is equal to the size of the subcarrier group used to compute these
+//			attributes (see clause 11.4.1 of [ITUT G.993.2]).
+//
+//		Hlingus
+//			This attribute is the number of subcarriers per group used to report HLINpsus. (R) (mandatory)
+//			(1-byte)
+//
+//		Hloggus
+//			This attribute is the number of subcarriers per group used to report HLOGpsus. (R) (mandatory)
+//			(1-byte)
+//
+//		Qlngus
+//			This attribute is the number of subcarriers per group used to report QLNpsus. (R) (mandatory)
+//			(1-byte)
+//
+//		Snrgus
+//			This attribute is the number of subcarriers per group used to report SNRpsus. (R) (mandatory)
+//			(1-byte)
+//
+//		Mrefpsdus Table
+//			The upstream medley reference PSD attribute contains the set of breakpoints exchanged in the
+//			MREFPSDus fields of the R-PRM message of [ITU-T G.993.2].
+//
+//			The format is similar to that specified for the PSD descriptor in [ITUT-G.993.2]. In [ITU-T
+//			G.993.2], the first byte gives the size of the table, each entry of which is 3-bytes. In the
+//			OMCI definition, the first byte is omitted because the size of the table is known from the
+//			response to the get command.
+//
+//			(R) (mandatory) (3 * N bytes, where N is the number of breakpoints)
+//
+//		Trellisus
+//			This attribute reports whether trellis coding is in use in the upstream direction.
+//
+//			0	Trellis not used
+//
+//			1	Trellis used
+//
+//			(R) (mandatory for ITU-T G.993.2 VDSL2, optional for others) (1-byte)
+//
+//		Actualce
+//			This attribute reports the cyclic extension used on the line. It is coded as an unsigned integer
+//			from 2 to 16 in units of N/32 samples, where 2N is the IDFT size. (R) (mandatory) (1-byte)
+//
+//		Upbokle_R
+//			UPBOKLE-R: This attribute contains the electrical length estimated by the VTU-R expressed in
+//			decibels at 1-MHz. This is the value contained in the message RMSG1 (see clause 12.3.3.2.2.1of
+//			[ITUT G.993.2]). Its value lies in the range 0 (0.0-dB) to 1280 (128.0-dB) (R) (optional)
+//			(2-bytes)
+//
+//		Actual Rate Adaptation Mode Upstream
+//			The ACT-RA-MODEus attribute indicates the actual active RA mode in the upstream direction.
+//
+//			1	MANUAL
+//
+//			2	AT_INIT
+//
+//			3	DYNAMIC
+//
+//			4	DYNAMIC with SOS ([ITU-T G.993.2] only)
+//
+//			(R) (optional) (1-byte)
+//
+//		Actual Impulse Noise Protection Roc Upstream
+//			The ACTINP-ROC-us attribute reports the actual INP of the ROC in the upstream direction
+//			expressed in multiples of T4k. The INP of this attribute is equal to the integer value
+//			multiplied by 0.1 symbols. Valid values and usage are given in clause 7.5.1.34.2 of
+//			[ITUT-G.997.1]. (R) (optional) (1-byte)
+//
+//		Snr Margin Roc Upstream
+//			The SNRM-ROC-us attribute reports the actual signal-to-noise margin of the ROC in the upstream
+//			direction. Its value ranges from 0  (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF
+//			indicates that the attribute is out of range. (R) (optional) (2-bytes)
+//
+type Vdsl2LineInventoryAndStatusDataPart2 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	vdsl2lineinventoryandstatusdatapart2BME = &ManagedEntityDefinition{
+		Name:    "Vdsl2LineInventoryAndStatusDataPart2",
+		ClassID: 169,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			GetNext,
+		),
+		AllowedAttributeMask: 0xfffc,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("Vdsl2TransmissionSystemCapabilityXtuR", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+			2:  ByteField("Actsnrmodeus", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+			3:  Uint16Field("Upbokle", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+			4:  ByteField("Hlingus", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+			5:  ByteField("Hloggus", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
+			6:  ByteField("Qlngus", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+			7:  ByteField("Snrgus", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
+			8:  TableField("MrefpsdusTable", TableAttributeType, 0x0100, TableInfo{nil, 3}, mapset.NewSetWith(Read), false, false, false, 8),
+			9:  ByteField("Trellisus", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
+			10: ByteField("Actualce", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
+			11: Uint16Field("UpbokleR", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11),
+			12: ByteField("ActualRateAdaptationModeUpstream", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
+			13: ByteField("ActualImpulseNoiseProtectionRocUpstream", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13),
+			14: Uint16Field("SnrMarginRocUpstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewVdsl2LineInventoryAndStatusDataPart2 (class ID 169) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVdsl2LineInventoryAndStatusDataPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart2BME, params...)
+}